;;
esac
-# H.Merijn Brand [17 Feb 2004]
-# This comment is just to ensure that Configure will find variables that
-# are removed/replaced in patches on blead, but are still needed in the
-# 5.8.x, 5.6.x and 5.005.x maintainance tracks.
-# metaconfig -m will scan all .SH files on this level (not deeper), and
-# not in x2p and other subfolders. This file is as good as any .SH
-# patch references
-# #22227 $baserev
-# #22302 $yacc $byacc
-
-# H.Merijn Brand [30 Oct 2004]
-# Mentioned for the same reason for future reference
-# #23434 $d_strlcat $d_strlcpy
-
: This forces SH files to create target in same directory as SH file.
: This is so that make depend always knows where to find SH derivatives.
case "$0" in
$this_target: uni.data" ;;
Text/ParseWords) extra_dep="$extra_dep
$this_target: lib/auto/Scalar/Util.$dlext" ;;
+ SDBM_File) extra_dep="$extra_dep
+$this_target: lib/auto/Cwd/Cwd.$dlext" ;;
esac
done
dtrace_h=''
dtrace_o=''
+minidtrace_o=''
case "$usedtrace" in
define|true)
dtrace_h='perldtrace.h'
$dtrace -G -s perldtrace.d -o perldtrace.tmp >/dev/null 2>&1 \
- && rm -f perldtrace.tmp && dtrace_o='perldtrace$(OBJ_EXT)'
+ && rm -f perldtrace.tmp && dtrace_o='perldtrace$(OBJ_EXT)' \
+ && minidtrace_o='miniperldtrace$(OBJ_EXT)'
;;
esac
PERL_EXE = perl\$(EXE_EXT)
RUN_PERL = \$(LDLIBPTH) \$(RUN) ./perl\$(EXE_EXT)
+# Macros to run our tests
+RUN_TESTS = \$(LDLIBPTH) ./runtests
dynamic_ext = $dynamic_list
dynamic_ext_re = $dynamic_ext_re
DTRACE = $dtrace
DTRACE_H = $dtrace_h
DTRACE_O = $dtrace_o
+MINIDTRACE_O = $minidtrace_o
FIRSTMAKEFILE = $firstmakefile
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>$Makefile <<'!NO!SUBS!'
-private = preplibrary $(CONFIGPM) $(CONFIGPOD) lib/ExtUtils/Miniperl.pm git_version.h
+private = preplibrary $(CONFIGPM) $(CONFIGPOD) lib/ExtUtils/Miniperl.pm git_version.h lib/buildcustomize.pl
# Files to be built with variable substitution before miniperl
# is available.
-sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
- myconfig.SH writemain.SH pod/Makefile.SH
-
-shextract = Makefile cflags config.h makeaperl makedepend \
- makedir myconfig writemain pod/Makefile
+sh = Makefile.SH cflags.SH config_h.SH makedepend.SH myconfig.SH pod/Makefile.SH
-# Files to be built with variable substitution after miniperl is
-# available. Dependencies handled manually below (for now).
+shextract = Makefile cflags config.h makedepend makedir myconfig pod/Makefile
-pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \
- pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL
-
-plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \
- pod/pod2usage pod/podchecker pod/podselect
-
-addedbyconf = UU $(shextract) $(plextract) pstruct
+addedbyconf = UU $(shextract) pstruct
# Unicode data files generated by mktables
-unidatafiles = lib/unicore/Canonical.pl lib/unicore/Exact.pl \
- lib/unicore/Properties lib/unicore/Decomposition.pl \
- lib/unicore/CombiningClass.pl lib/unicore/Name.pl lib/unicore/PVA.pl
+unidatafiles = lib/unicore/Decomposition.pl lib/unicore/TestProp.pl \
+ lib/unicore/CombiningClass.pl lib/unicore/Name.pl \
+ lib/unicore/Heavy.pl lib/unicore/mktables.lst
# Directories of Unicode data files generated by mktables
unidatadirs = lib/unicore/To lib/unicore/lib
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h
h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
-h5 = utf8.h warnings.h mydtrace.h
+h5 = utf8.h warnings.h mydtrace.h op_reg_common.h l1_char_class_tab.h
h = $(h1) $(h2) $(h3) $(h4) $(h5)
c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c
c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
-c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c
+c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c
c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c
c5 = $(madlysrc) $(mallocsrc)
-c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c perlmini.c
+c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c opmini.c perlmini.c
obj0 = op$(OBJ_EXT) perl$(OBJ_EXT)
-obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT)
+obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT) keywords$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
-mini_obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
+minindt_obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
+mini_obj = $(minindt_obj) $(MINIDTRACE_O)
ndt_obj = $(obj0) $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
obj = $(ndt_obj) $(DTRACE_O)
-perltoc_pod_prereqs = extra.pods pod/perlapi.pod pod/perldelta.pod pod/perlintern.pod pod/perlmodlib.pod
+perltoc_pod_prereqs = extra.pods pod/perl51310delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs)
-Icwd = -Icpan/Cwd -Icpan/Cwd/lib
+Icwd = -Idist/Cwd -Idist/Cwd/lib
lintflags = \
-b \
.c.s:
$(CCCMDSRC) -S $*.c
-all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) miniperl $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
+all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
@echo " ";
@echo " Everything is up to date. Type '$(MAKE) test' to run test suite."
.PHONY: all translators utilities
-lib/Config_git.pl git_version.h: $(MINIPERL_EXE) make_patchnum.pl
+# Both git_version.h and lib/Config_git.pl are built
+# by make_patchnum.pl.
+git_version.h: lib/Config_git.pl
+
+lib/Config_git.pl: $(MINIPERL_EXE) make_patchnum.pl
$(MINIPERL) make_patchnum.pl
# make sure that we recompile perl.c if the git version changes
perl$(OBJ_EXT): git_version.h
-translators: $(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) FORCE
- @echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all
+!NO!SUBS!
+
+# Making utilities and translators require Cwd. If we have dynamic
+# loading, we only need miniperl and Cwd.$dlext. If we have static
+# loading, we need to build perl first.
+case "$usedl" in
+define)
+ util_deps='$(MINIPERL_EXE) $(CONFIGPM) lib/auto/Cwd/Cwd$(DLSUFFIX) FORCE'
+ x2p_deps='$(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) FORCE'
+ ;;
+*) util_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
+ x2p_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
+ ;;
+esac
+
+$spitshell >>$Makefile <<!GROK!THIS!
+translators: $x2p_deps
+ @echo " "; echo " Making x2p stuff"; cd x2p; \$(LDLIBPTH) \$(MAKE) all
+
+x2p/s2p: $x2p_deps
+ cd x2p; \$(LDLIBPTH) \$(MAKE) s2p
-utilities: $(MINIPERL_EXE) $(CONFIGPM) $(plextract) FORCE
- @echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all
+utilities: $util_deps
+ @echo " "; echo " Making utilities"; cd utils; \$(LDLIBPTH) \$(MAKE) all
+!GROK!THIS!
+
+$spitshell >>$Makefile <<'!NO!SUBS!'
# This is now done by installman only if you actually want the man pages.
# @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
FORCE:
@sh -c true
!NO!SUBS!
-$spitshell >>$Makefile <<!GROK!THIS!
-# We do a copy of the op.c instead of a symlink because gcc gets huffy
+for file in op perl; do
+ if $issymlink $file.c; then
+ $spitshell >>$Makefile <<!GROK!THIS!
+
+# We do a copy of the $file.c instead of a symlink because gcc gets huffy
# if we have a symlink forest to another disk (it complains about too many
# levels of symbolic links, even if we have only two)
-opmini.c: op.c
- \$(RMS) opmini.c
- \$(CPS) op.c opmini.c
+${file}mini.c: $file.c
+ \$(RMS) ${file}mini.c
+ \$(CPS) ${file}.c ${file}mini.c
+!GROK!THIS!
+ else
+ $spitshell >>$Makefile <<!GROK!THIS!
+
+${file}mini.c: $file.c
+ \$(RMS) ${file}mini.c
+ \$(LNS) ${file}.c ${file}mini.c
+!GROK!THIS!
+ fi
+
+ $spitshell >>$Makefile <<!GROK!THIS!
-opmini\$(OBJ_EXT): opmini.c
- \$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c
+${file}mini\$(OBJ_EXT): ${file}mini.c
+ \$(CCCMD) \$(PLDLFLAGS) $DPERL_IS_MINIPERL $DPERL_EXTERNAL_GLOB ${file}mini.c
+!GROK!THIS!
+done
-perlmini.c: perl.c
- \$(RMS) perlmini.c
- \$(CPS) perl.c perlmini.c
+$spitshell >>$Makefile <<'!NO!SUBS!'
-perlmini\$(OBJ_EXT): perlmini.c
- \$(CCCMD) \$(PLDLFLAGS) $DPERL_IS_MINIPERL perlmini.c
+globals$(OBJ_EXT): uudmap.h bitcount.h
-globals\$(OBJ_EXT): uudmap.h bitcount.h
+uudmap.h: bitcount.h
-uudmap.h bitcount.h: generate_uudmap\$(HOST_EXE_EXT)
- \$(RUN) ./generate_uudmap\$(HOST_EXE_EXT) uudmap.h bitcount.h
+bitcount.h: generate_uudmap$(HOST_EXE_EXT)
+ $(RUN) ./generate_uudmap$(HOST_EXE_EXT) uudmap.h bitcount.h
-generate_uudmap\$(HOST_EXE_EXT): generate_uudmap\$(OBJ_EXT)
- \$(CC) -o generate_uudmap\$(EXE_EXT) \$(LDFLAGS) generate_uudmap\$(OBJ_EXT) \$(libs)
+generate_uudmap$(HOST_EXE_EXT): generate_uudmap$(OBJ_EXT)
+ $(CC) -o generate_uudmap$(EXE_EXT) $(LDFLAGS) generate_uudmap$(OBJ_EXT) $(libs)
-!GROK!THIS!
-$spitshell >>$Makefile <<'!NO!SUBS!'
miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h
$(CCCMD) $(PLDLFLAGS) $*.c
-perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
- sh writemain $(DYNALOADER) $(static_ext) > perlmain.c
+perlmain.c: $(MINIPERL_EXE) lib/ExtUtils/Miniperl.pm
+ $(MINIPERL) -Ilib -MExtUtils::Miniperl -e 'writemain(@ARGV)' DynaLoader $(static_ext) > perlmain.c
perlmain$(OBJ_EXT): perlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c
case "$dtrace_o" in
?*)
$spitshell >>$Makefile <<'!NO!SUBS!'
-$(DTRACE_O): perldtrace.d
+$(DTRACE_O): perldtrace.d $(ndt_obj)
$(DTRACE) -G -s perldtrace.d -o $(DTRACE_O) $(ndt_obj)
+$(MINIDTRACE_O): perldtrace.d $(minindt_obj)
+ $(DTRACE) -G -s perldtrace.d -o $(MINIDTRACE_O) $(minindt_obj)
+
!NO!SUBS!
;;
esac
$spitshell >>$Makefile <<'!NO!SUBS!'
.PHONY: preplibrary
-preplibrary: $(MINIPERL_EXE) $(CONFIGPM) lib/re.pm $(PREPLIBRARY_LIBPERL)
+preplibrary: $(MINIPERL_EXE) $(CONFIGPM) $(PREPLIBRARY_LIBPERL)
+
+$(CONFIGPM_FROM_CONFIG_SH): $(CONFIGPOD)
-$(CONFIGPM_FROM_CONFIG_SH) $(CONFIGPOD): config.sh $(MINIPERL_EXE) configpm Porting/Glossary lib/Config_git.pl
+$(CONFIGPOD): config.sh $(MINIPERL_EXE) configpm Porting/Glossary lib/Config_git.pl
$(MINIPERL) configpm
lib/ExtUtils/Miniperl.pm: miniperlmain.c $(MINIPERL_EXE) minimod.pl $(CONFIGPM)
$(MINIPERL) minimod.pl > lib/ExtUtils/Miniperl.pm
-lib/re.pm: ext/re/re.pm
- @-rm -f $@
- cp ext/re/re.pm lib/re.pm
-
-$(plextract): $(MINIPERL_EXE) $(CONFIGPM) x2p/s2p $(dynamic_ext)
- @-rm -f $@
- $(MINIPERL) $@.PL
+lib/buildcustomize.pl: $(MINIPERL_EXE) write_buildcustomize.pl
+ $(MINIPERL) write_buildcustomize.pl >lib/buildcustomize.pl
-x2p/s2p: $(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) x2p/s2p.PL
- cd x2p; $(LDLIBPTH) $(MAKE) s2p
-
-unidatafiles $(unidatafiles): uni.data
+unidatafiles $(unidatafiles) pod/perluniprops.pod: uni.data
uni.data: $(MINIPERL_EXE) $(CONFIGPM) lib/unicore/mktables $(nonxs_ext)
- $(MINIPERL) $(Icwd) lib/unicore/mktables -C lib/unicore -w
- touch uni.data
+ $(MINIPERL) $(Icwd) lib/unicore/mktables -C lib/unicore -P pod -maketest -makelist -p
+# Commented out so always runs, mktables looks at far more files than we
+# can in this makefile to decide if needs to run or not
+# touch uni.data
# $(PERL_EXE) and ext because buildtoc uses Text::Wrap uses re
# But also this ensures that all extensions are built before we try to scan
pod/perltoc.pod: $(perltoc_pod_prereqs) $(PERL_EXE) $(ext) pod/buildtoc
$(RUN_PERL) -f -Ilib pod/buildtoc --build-toc -q
-pod/perlapi.pod pod/perlintern.pod: $(MINIPERL_EXE) autodoc.pl embed.fnc
+pod/perlapi.pod: pod/perlintern.pod
+
+pod/perlintern.pod: $(MINIPERL_EXE) autodoc.pl embed.fnc
$(MINIPERL) autodoc.pl
pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST
$(MINIPERL) $(Icwd) pod/perlmodlib.PL -q
-pod/perldelta.pod: pod/perl5111delta.pod
- $(LNS) perl5111delta.pod pod/perldelta.pod
+pod/perl51310delta.pod: pod/perldelta.pod
+ $(LNS) perldelta.pod pod/perl51310delta.pod
extra.pods: $(MINIPERL_EXE)
-@test ! -f extra.pods || rm -f `cat extra.pods`
.PHONY: install install-strip install-all install-verbose install-silent \
no-install install.perl install.man install.html
-META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm
- PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib Porting/makemeta
-
install-strip:
$(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)"
--splithead=pod/perlipc \
--splititem=pod/perlfunc \
--libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
- --ignore=Porting/Maintainers.pm,Porting/patching.pod,Porting/pumpkin.pod,Porting/repository.pod \
+ --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \
--verbose
perly.h: perly.y
-@sh -c true
-# No compat3.sym here since and including the 5.004_50.
-# No interp.sym since 5.005_03.
-SYM = global.sym globvar.sym perlio.sym pp.sym
+SYM = global.sym globvar.sym perlio.sym
SYMH = perlvars.h intrpvar.h
# The following files are generated automatically
# embed.pl: proto.h embed.h embedvar.h global.sym
# perlapi.h perlapi.c
-# [* embed.pl needs pp.sym generated by opcode.pl! *]
-# keywords.pl: keywords.h
-# opcode.pl: opcode.h opnames.h pp_proto.h pp.sym
+# opcode.pl: opcode.h opnames.h pp_proto.h
# regcomp.pl: regnodes.h
# warnings.pl: warnings.h lib/warnings.pm
# The correct versions should be already supplied with the perl kit,
# with your existing copy of perl
# (make regen_headers is kept for backwards compatibility)
-AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \
+AUTOGEN_FILES = opcode.h opnames.h pp_proto.h proto.h \
embed.h embedvar.h global.sym \
perlapi.h perlapi.c regnodes.h \
warnings.h lib/warnings.pm
regen_headers: FORCE
-perl regen.pl -v
-regen_all: regen
+regen_meta: META.yml
+
+META.yml: FORCE
+ PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib Porting/makemeta
+
+
+regen_all: regen regen_meta
.PHONY: manisort manicheck
#
# DynaLoader may be needed for extensions that use Makefile.PL.
-$(DYNALOADER): $(MINIPERL_EXE) preplibrary FORCE $(nonxs_ext)
+$(DYNALOADER): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary FORCE $(nonxs_ext)
$(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
-d_dummy $(dynamic_ext): $(MINIPERL_EXE) preplibrary makeppport $(DYNALOADER) FORCE
+d_dummy $(dynamic_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE $(PERLEXPORT)
$(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
-s_dummy $(static_ext): $(MINIPERL_EXE) preplibrary makeppport $(DYNALOADER) FORCE
+s_dummy $(static_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE
$(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
-n_dummy $(nonxs_ext): $(MINIPERL_EXE) preplibrary FORCE
+n_dummy $(nonxs_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary FORCE
$(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
!NO!SUBS!
-rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
-rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
-rm -f $(PERL_EXE) $(MINIPERL_EXE) $(LIBPERL) libperl.* microperl
- -rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old
-rm -f config.arch config.over $(DTRACE_H) runtests
# Do not 'make _tidy' directly.
rm -f lib/.exists lib/*/.exists lib/*/*/.exists
rm -f h2ph.man pstruct
rm -rf .config
- rm -f preload lib/re.pm
+ rm -f preload
rm -rf lib/Encode lib/Compress lib/Hash lib/re
rm -rf lib/TAP lib/Module/Pluggable lib/App
rm -rf lib/mro
rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT)
rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX)
rm -fr lib/B
- -rmdir lib/Data
- -rmdir lib/Filter/Util lib/IO/Socket
- -rmdir lib/List lib/MIME lib/Scalar lib/Sys
- -rmdir lib/threads lib/XS
- -rmdir lib/CPANPLUS/Dist/Build/t/dummy-*
- -rmdir lib/CPANPLUS/t/dummy-cpanplus lib/CPANPLUS/t/dummy-localmirror
+ rm -fr lib/CPAN lib/CPANPLUS
+ rm -fr lib/ExtUtils/CBuilder
+ -rmdir cpan/CPANPLUS-Dist-Build/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-localmirror
+ -rmdir ext/B/lib
+ -rmdir lib/Archive/Tar lib/Archive lib/Attribute
+ -rmdir lib/CGI
+ -rmdir lib/Data lib/Devel lib/Digest
+ -rmdir lib/ExtUtils/Command lib/ExtUtils/Constant lib/ExtUtils/Liblist lib/ExtUtils/MakeMaker
+ -rmdir lib/File/Spec lib/Filter/Util lib/Filter
+ -rmdir lib/I18N/LangTags lib/IO/Socket lib/IO lib/IPC
+ -rmdir lib/List/Util lib/List
+ -rmdir lib/Locale/Maketext lib/Locale
+ -rmdir lib/Log/Message lib/Log
+ -rmdir lib/Math/Big* lib/Math
+ -rmdir lib/Memoize lib/MIME
+ -rmdir lib/Module/Build/Platform lib/Module/Build lib/Module/Load lib/Module
+ -rmdir lib/Net/FTP lib/Object
+ -rmdir lib/Parse/CPAN lib/Parse
+ -rmdir lib/PerlIO/via lib/PerlIO
+ -rmdir lib/Package lib/Params
+ -rmdir lib/Pod/Perldoc lib/Pod/Simple lib/Pod/Text
+ -rmdir lib/Sys lib/Scalar/Util lib/Scalar
+ -rmdir lib/Term/UI lib/Thread lib/Tie/Hash
+ -rmdir lib/Test/Builder/Tester lib/Test/Builder lib/Test
+ -rmdir lib/Unicode/Collate
+ -rmdir lib/XS/APItest lib/XS
+ -rmdir lib/inc/latest lib/inc
+ -rmdir lib/autodie/exception lib/autodie lib/encoding lib/threads
-rm -f lib/ExtUtils/CBuilder/t/libcompilet.dll.a
-rm -f lib/ExtUtils/ParseXS/t/libXSTest.dll.a
config.h: config_h.SH config.sh
$(SHELL) config_h.SH
-# When done, touch perlmain.c so that it doesn't get remade each time.
.PHONY: depend
depend: makedepend
sh ./makedepend MAKE=$(MAKE)
- - test -s perlmain.c && touch perlmain.c
cd x2p; $(MAKE) depend
# Cannot postpone this until $firstmakefile is ready ;-)
makedepend: makedepend.SH config.sh
sh ./makedepend.SH
+runtests: runtests.SH config.sh
+ sh ./runtests.SH
+
.PHONY: test check test_prep test_prep_nodll test_prep_pre \
test_prep_reonly test_tty test-tty test_notty test-notty \
utest ucheck test.utf8 check.utf8 test.torture torturetest \
_test:
echo >&2 The _test target is deprecated. Please upgrade your smoker
- PERL=./perl ./runtests choose
+ PERL=./perl $(RUN_TESTS) choose
# Cannot delegate rebuilding of t/perl to make
# to allow interlaced test and minitest
test_prep_pre: preplibrary utilities $(nonxs_ext)
-test_prep: test_prep_pre $(MINIPERL_EXE) $(unidatafiles) $(PERL_EXE) $(dynamic_ext) $(TEST_PERL_DLL)
+test_prep: test_prep_pre $(MINIPERL_EXE) $(unidatafiles) $(PERL_EXE) $(dynamic_ext) $(TEST_PERL_DLL) runtests x2p/s2p $(generated_pods)
cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE))
test_prep_reonly: $(MINIPERL_EXE) $(PERL_EXE) $(dynamic_ext_re) $(TEST_PERL_DLL)
cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE))
test check: test_prep
- ./runtests choose
+ $(RUN_TESTS) choose
test_tty: test_prep
- ./runtests tty
+ $(RUN_TESTS) tty
test_notty: test_prep
- ./runtests no-tty
+ $(RUN_TESTS) no-tty
utest ucheck test.utf8 check.utf8: test_prep
- TEST_ARGS=-utf8 ./runtests choose
+ TEST_ARGS=-utf8 $(RUN_TESTS) choose
coretest: test_prep
- TEST_ARGS=-core ./runtests choose
+ TEST_ARGS=-core $(RUN_TESTS) choose
test-prep: test_prep
# Torture testing
test.torture torturetest: test_prep
- TEST_ARGS=-torture ./runtests choose
+ TEST_ARGS=-torture $(RUN_TESTS) choose
# Targets for UTF16 testing:
&& $(RUN_PERL) TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
test.utf16 check.utf16: test_prep
- TEST_ARGS=-utf16 ./runtests choose
+ TEST_ARGS=-utf16 $(RUN_TESTS) choose
utest.utf16 ucheck.utf16: test_prep
- TEST_ARGS="-utf8 -utf16" ./runtests choose
+ TEST_ARGS="-utf8 -utf16" $(RUN_TESTS) choose
# Targets for valgrind testing:
test_prep.valgrind: test_prep perl.valgrind
test.valgrind check.valgrind: test_prep perl.valgrind.config
- PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' ./runtests choose
+ PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(RUN_TESTS) choose
utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config
- PERL_VALGRIND=1 TEST_ARGS=-utf8 ./runtests choose
+ PERL_VALGRIND=1 TEST_ARGS=-utf8 $(RUN_TESTS) choose
test_notty.valgrind: test_prep.valgrind perl.valgrind.config
- PERL_VALGRIND=1 ./runtests no-tty
+ PERL_VALGRIND=1 $(RUN_TESTS) no-tty
# Targets for Third Degree testing.
cd t && (rm -f ./perl.third$(EXE_EXT); $(LNS) ../perl.third$(EXE_EXT) perl.third(EXE_EXT))
test.third check.third: test_prep.third perl.third
- PERL=./perl.third PERL_3LOG=1 ./runtests choose
+ PERL=./perl.third PERL_3LOG=1 $(RUN_TESTS) choose
utest.third ucheck.third: test_prep.third perl.third
- PERL=./perl.third PERL_3LOG=1 TEST_ARGS=-utf8 ./runtests choose
+ PERL=./perl.third PERL_3LOG=1 TEST_ARGS=-utf8 $(RUN_TESTS) choose
test_notty.third: test_prep.third perl.third
- PERL=./perl.third PERL_3LOG=1 ./runtests choose
+ PERL=./perl.third PERL_3LOG=1 $(RUN_TESTS) choose
# Targets for Deparse testing.
test.deparse: test_prep
- TEST_ARGS=-deparse ./runtests choose
+ TEST_ARGS=-deparse $(RUN_TESTS) choose
test_notty.deparse: test_prep
- TEST_ARGS=-deparse ./runtests no-tty
+ TEST_ARGS=-deparse $(RUN_TESTS) no-tty
# Targets to run the test suite with -t
test.taintwarn: test_prep
- TEST_ARGS=-taintwarn ./runtests choose
+ TEST_ARGS=-taintwarn $(RUN_TESTS) choose
minitest.prep:
- -@test test -f lib/Config.pm || $(MAKE) lib/Config.pm $(unidatafiles)
+ -@test -f lib/Config.pm || $(MAKE) lib/Config.pm $(unidatafiles)
@echo " "
@echo "You may see some irrelevant test failures if you have been unable"
@echo "to build lib/Config.pm, or the Unicode data files."
# Can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
-minitest: $(MINIPERL_EXE) lib/re.pm minitest.prep
+minitest: $(MINIPERL_EXE) minitest.prep
- cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE)) \
&& $(RUN_PERL) TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t op/*.t uni/*.t </dev/tty
# Test via harness
test_harness: test_prep
- TESTFILE=harness ./runtests choose
+ TESTFILE=harness $(RUN_TESTS) choose
test_harness_notty: test_prep
- HARNESS_NOTTY=1 TESTFILE=harness ./runtests choose
+ HARNESS_NOTTY=1 TESTFILE=harness $(RUN_TESTS) choose
test-reonly: test_prep_reonly
- TEST_ARGS='-re \bre\/' TESTFILE=harness ./runtests choose
+ TEST_ARGS='-re \bre\/' TESTFILE=harness $(RUN_TESTS) choose
# Porting tests (well-formedness of pod, manifest, etc)
test_porting: test_prep
- cd t && $(RUN_PERL) harness porting/*.t
+ cd t && $(RUN_PERL) harness porting/*.t ../lib/diagnostics.t
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
nokfilenack: utilities
$(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
-.PHONY: clist hlist shlist pllist
+.PHONY: clist hlist shlist
clist: $(c)
echo $(c) | tr ' ' $(TRNL) >.clist
shlist: $(sh)
echo $(sh) | tr ' ' $(TRNL) >.shlist
-pllist: $(pl)
- echo $(pl) | tr ' ' $(TRNL) >.pllist
-
Makefile: Makefile.SH ./config.sh
$(SHELL) Makefile.SH
distcheck: FORCE
perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
-.PHONY: elc
-elc: emacs/cperl-mode.elc
-
-emacs/cperl-mode.elc: emacs/cperl-mode.el
- -cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el
-
-.PHONY: etags ctags tags
-
-etags: TAGS
-
-TAGS: emacs/cperl-mode.elc
- sh emacs/ptags
-
-# Let's hope make will not go into an infinite loop on case-unsensitive systems
-# This may also fail if . is in the head of the path, since perl will
-# require -Ilib
-tags: TAGS
- perl emacs/e2ctags.pl TAGS > tags
+.PHONY: ctags
ctags:
ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c --exclude=perlmini.c *.c *.h