/* op.h
*
- * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- * 2000, 2001, 2002, 2003, 2004, 2005 by Larry Wall and others
+ * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+ * 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 by Larry Wall and others
*
* You may distribute under the terms of either the GNU General Public
* License or the Artistic License, as specified in the README file.
* op_type The type of the operation.
* op_opt Whether or not the op has been optimised by the
* peephole optimiser.
- * op_static Whether or not the op is statically defined.
- * This flag is used by the B::C compiler backend
- * and indicates that the op should not be freed.
- * op_spare Five spare bits!
+ *
+ * See the comments in S_clear_yystack() for more
+ * details on the following three flags:
+ *
+ * op_latefree tell op_free() to clear this op (and free any kids)
+ * but not yet deallocate the struct. This means that
+ * the op may be safely op_free()d multiple times
+ * op_latefreed an op_latefree op has been op_free()d
+ * op_attached this op (sub)tree has been attached to a CV
+ *
+ * op_spare three spare bits!
* op_flags Flags common to all operations. See OPf_* below.
* op_private Flags peculiar to a particular operation (BUT,
* by default, set to the number of children until
* the operation is privatized by a check routine,
* which may or may not check number of children).
*/
+#include "op_reg_common.h"
-#ifdef DEBUGGING_OPS
-#define OPCODE opcode
-#else
#define OPCODE U16
-#endif
#ifdef PERL_MAD
# define MADPROP_IN_BASEOP MADPROP* op_madprop;
# define MADPROP_IN_BASEOP
#endif
+typedef PERL_BITFIELD16 Optype;
+
#ifdef BASEOP_DEFINITION
#define BASEOP BASEOP_DEFINITION
#else
OP* (CPERLscope(*op_ppaddr))(pTHX); \
MADPROP_IN_BASEOP \
PADOFFSET op_targ; \
- unsigned op_type:9; \
- unsigned op_opt:1; \
- unsigned op_static:1; \
- unsigned op_spare:5; \
+ PERL_BITFIELD16 op_type:9; \
+ PERL_BITFIELD16 op_opt:1; \
+ PERL_BITFIELD16 op_latefree:1; \
+ PERL_BITFIELD16 op_latefreed:1; \
+ PERL_BITFIELD16 op_attached:1; \
+ PERL_BITFIELD16 op_spare:3; \
U8 op_flags; \
U8 op_private;
#endif
+/* If op_type:9 is changed to :10, also change PUSHEVAL in cop.h.
+ Also, if the type of op_type is ever changed (e.g. to PERL_BITFIELD32)
+ then all the other bit-fields before/after it should change their
+ types too to let VC pack them into the same 4 byte integer.*/
+
#define OP_GIMME(op,dfl) \
(((op)->op_flags & OPf_WANT) == OPf_WANT_VOID ? G_VOID : \
((op)->op_flags & OPf_WANT) == OPf_WANT_SCALAR ? G_SCALAR : \
((op)->op_flags & OPf_WANT) == OPf_WANT_LIST ? G_ARRAY : \
dfl)
+#define OP_GIMME_REVERSE(flags) ((flags) & G_WANT)
+
/*
=head1 "Gimme" Values
=for apidoc Amn|U32|GIMME_V
The XSUB-writer's equivalent to Perl's C<wantarray>. Returns C<G_VOID>,
C<G_SCALAR> or C<G_ARRAY> for void, scalar or list context,
-respectively.
+respectively. See L<perlcall> for a usage example.
=for apidoc Amn|U32|GIMME
A backward-compatible version of C<GIMME_V> which can only return
/* On OP_EXISTS, treat av as av, not avhv. */
/* On OP_(ENTER|LEAVE)EVAL, don't clear $@ */
/* On OP_ENTERITER, loop var is per-thread */
- /* On pushre, re is /\s+/ imp. by split " " */
+ /* On pushre, rx is used as part of split, e.g. split " " */
/* On regcomp, "use re 'eval'" was in scope */
/* On OP_READLINE, was <$filehandle> */
/* On RV2[ACGHS]V, don't create GV--in
/* On OP_ENTERWHEN, there's no condition */
/* On OP_BREAK, an implicit break */
/* On OP_SMARTMATCH, an implicit smartmatch */
+ /* On OP_ANONHASH and OP_ANONLIST, create a
+ reference to the new anon hash or array */
+ /* On OP_ENTER, store caller context */
+ /* On OP_HELEM and OP_HSLICE, localization will be followed
+ by assignment, so do not wipe the target if it is special
+ (e.g. a glob or a magic SV) */
/* old names; don't use in new code, but don't break them, either */
#define OPf_LIST OPf_WANT_LIST
: G_SCALAR) \
: dowantarray())
-/* NOTE: OP_NEXTSTATE, OP_DBSTATE, and OP_SETSTATE (i.e. COPs) carry lower
+/* NOTE: OP_NEXTSTATE and OP_DBSTATE (i.e. COPs) carry lower
* bits of PL_hints in op_private */
/* Private for lvalues */
#define OPpDEREF_AV 32 /* Want ref to AV. */
#define OPpDEREF_HV 64 /* Want ref to HV. */
#define OPpDEREF_SV (32|64) /* Want ref to SV. */
+/* Private for OP_RV2SV, OP_RV2AV, OP_RV2AV */
+#define OPpDEREFed 4 /* prev op was OPpDEREF */
/* OP_ENTERSUB only */
#define OPpENTERSUB_DB 16 /* Debug subroutine. */
#define OPpENTERSUB_HASTARG 32 /* Called from OP tree. */
#define OPpENTERSUB_NOMOD 64 /* Immune to mod() for :attrlist. */
- /* OP_RV2CV only */
+ /* OP_ENTERSUB and OP_RV2CV only */
#define OPpENTERSUB_AMPER 8 /* Used & form to call. */
#define OPpENTERSUB_NOPAREN 128 /* bare sub call (without parens) */
#define OPpENTERSUB_INARGS 4 /* Lval used as arg to a sub. */
#define OPpLVAL_DEFER 16 /* Defer creation of array/hash elem */
/* OP_RV2?V, OP_GVSV, OP_ENTERITER only */
#define OPpOUR_INTRO 16 /* Variable was in an our() */
- /* OP_RV2[AH]V, OP_PAD[AH]V, OP_[AH]ELEM */
+ /* OP_RV2[AGH]V, OP_PAD[AH]V, OP_[AH]ELEM */
#define OPpMAYBE_LVSUB 8 /* We might be an lvalue to return */
+ /* OP_PADSV only */
+#define OPpPAD_STATE 16 /* is a "state" pad */
/* for OP_RV2?V, lower bits carry hints (currently only HINT_STRICT_REFS) */
/* OP_RV2GV only */
-#define OPpDONT_INIT_GV 8 /* Call gv_fetchpv with GV_NOINIT */
+#define OPpDONT_INIT_GV 4 /* Call gv_fetchpv with GV_NOINIT */
/* (Therefore will return whatever is currently in the symbol table, not
guaranteed to be a PVGV) */
/* Private for OP_DELETE */
#define OPpSLICE 64 /* Operating on a list of keys */
+/* Also OPpLVAL_INTRO (128) */
/* Private for OP_EXISTS */
#define OPpEXISTS_SUB 64 /* Checking for &sub, not {} or []. */
#define OPpSORT_QSORT 32 /* Use quicksort (not mergesort) */
#define OPpSORT_STABLE 64 /* Use a stable algorithm */
-/* Private for OP_THREADSV */
-#define OPpDONE_SVREF 64 /* Been through newSVREF once */
+/* Private for OP_REVERSE */
+#define OPpREVERSE_INPLACE 8 /* reverse in-place (@a = reverse @a) */
/* Private for OP_OPEN and OP_BACKTICK */
#define OPpOPEN_IN_RAW 16 /* binmode(F,":raw") on input fh */
/* Private for OP_FTXXX */
#define OPpFT_ACCESS 2 /* use filetest 'access' */
#define OPpFT_STACKED 4 /* stacked filetest, as in "-f -x $f" */
-#define OP_IS_FILETEST_ACCESS(op) \
- (((op)->op_type) == OP_FTRREAD || \
- ((op)->op_type) == OP_FTRWRITE || \
- ((op)->op_type) == OP_FTREXEC || \
- ((op)->op_type) == OP_FTEREAD || \
- ((op)->op_type) == OP_FTEWRITE || \
- ((op)->op_type) == OP_FTEEXEC)
/* Private for OP_(MAP|GREP)(WHILE|START) */
#define OPpGREP_LEX 2 /* iterate over lexical $_ */
BASEOP
OP * op_first;
OP * op_last;
- OP * op_pmreplroot; /* (type is really union {OP*,GV*,PADOFFSET}) */
- OP * op_pmreplstart;
- PMOP * op_pmnext; /* list of all scanpats */
#ifdef USE_ITHREADS
IV op_pmoffset;
#else
REGEXP * op_pmregexp; /* compiled expression */
#endif
- U32 op_pmflags;
- U32 op_pmpermflags;
- U8 op_pmdynflags;
+ U32 op_pmflags;
+ union {
+ OP * op_pmreplroot; /* For OP_SUBST */
+#ifdef USE_ITHREADS
+ PADOFFSET op_pmtargetoff; /* For OP_PUSHRE */
+#else
+ GV * op_pmtargetgv;
+#endif
+ } op_pmreplrootu;
+ union {
+ OP * op_pmreplstart; /* Only used in OP_SUBST */
#ifdef USE_ITHREADS
- char * op_pmstashpv;
+ char * op_pmstashpv; /* Only used in OP_MATCH, with PMf_ONCE set */
#else
- HV * op_pmstash;
+ HV * op_pmstash;
#endif
+ } op_pmstashstartu;
};
#ifdef USE_ITHREADS
-#define PM_GETRE(o) (INT2PTR(REGEXP*,SvIVX(PL_regex_pad[(o)->op_pmoffset])))
-#define PM_SETRE(o,r) STMT_START { \
- SV* const sv = PL_regex_pad[(o)->op_pmoffset]; \
- sv_setiv(sv, PTR2IV(r)); \
+#define PM_GETRE(o) (SvTYPE(PL_regex_pad[(o)->op_pmoffset]) == SVt_REGEXP \
+ ? (REGEXP*)(PL_regex_pad[(o)->op_pmoffset]) : NULL)
+/* The assignment is just to enforce type safety (or at least get a warning).
+ */
+/* With first class regexps not via a reference one needs to assign
+ &PL_sv_undef under ithreads. (This would probably work unthreaded, but NULL
+ is cheaper. I guess we could allow NULL, but the check above would get
+ more complex, and we'd have an AV with (SV*)NULL in it, which feels bad */
+/* BEWARE - something that calls this macro passes (r) which has a side
+ effect. */
+#define PM_SETRE(o,r) STMT_START { \
+ REGEXP *const _pm_setre = (r); \
+ assert(_pm_setre); \
+ PL_regex_pad[(o)->op_pmoffset] = MUTABLE_SV(_pm_setre); \
} STMT_END
-#define PM_GETRE_SAFE(o) (PL_regex_pad ? PM_GETRE(o) : (REGEXP*)0)
-#define PM_SETRE_SAFE(o,r) if (PL_regex_pad) PM_SETRE(o,r)
#else
#define PM_GETRE(o) ((o)->op_pmregexp)
#define PM_SETRE(o,r) ((o)->op_pmregexp = (r))
-#define PM_GETRE_SAFE PM_GETRE
-#define PM_SETRE_SAFE PM_SETRE
#endif
-#define PMdf_USED 0x01 /* pm has been used once already */
-#define PMdf_TAINTED 0x02 /* pm compiled from tainted pattern */
-#define PMdf_UTF8 0x04 /* pm compiled from utf8 data */
-#define PMdf_DYN_UTF8 0x08
-
-#define PMdf_CMP_UTF8 (PMdf_UTF8|PMdf_DYN_UTF8)
-
-#define PMf_RETAINT 0x0001 /* taint $1 etc. if target tainted */
-#define PMf_ONCE 0x0002 /* use pattern only once per reset */
-#define PMf_UNUSED 0x0004 /* free for use */
-#define PMf_MAYBE_CONST 0x0008 /* replacement contains variables */
-#define PMf_SKIPWHITE 0x0010 /* skip leading whitespace for split */
-#define PMf_WHITE 0x0020 /* pattern is \s+ */
-#define PMf_CONST 0x0040 /* subst replacement is constant */
-#define PMf_KEEP 0x0080 /* keep 1st runtime pattern forever */
-#define PMf_GLOBAL 0x0100 /* pattern had a g modifier */
-#define PMf_CONTINUE 0x0200 /* don't reset pos() if //g fails */
-#define PMf_EVAL 0x0400 /* evaluating replacement as expr */
-#define PMf_LOCALE 0x0800 /* use locale for character types */
-#define PMf_MULTILINE 0x1000 /* assume multiple lines */
-#define PMf_SINGLELINE 0x2000 /* assume single line */
-#define PMf_FOLD 0x4000 /* case insensitivity */
-#define PMf_EXTENDED 0x8000 /* chuck embedded whitespace */
-
-/* mask of bits stored in regexp->reganch */
-#define PMf_COMPILETIME (PMf_MULTILINE|PMf_SINGLELINE|PMf_LOCALE|PMf_FOLD|PMf_EXTENDED)
+#define PMf_BASE_SHIFT ((_RXf_PMf_SHIFT_NEXT)-1)
+
+/* taint $1 etc. if target tainted */
+#define PMf_RETAINT (1<<(PMf_BASE_SHIFT+1))
+
+/* match successfully only once per reset, with related flag RXf_USED in
+ * re->extflags holding state. This is used only for ?? matches, and only on
+ * OP_MATCH and OP_QR */
+#define PMf_ONCE (1<<(PMf_BASE_SHIFT+2))
+
+/* replacement contains variables */
+#define PMf_MAYBE_CONST (1<<(PMf_BASE_SHIFT+3))
+
+/* PMf_ONCE has matched successfully. Not used under threading. */
+#define PMf_USED (1<<(PMf_BASE_SHIFT+4))
+
+/* subst replacement is constant */
+#define PMf_CONST (1<<(PMf_BASE_SHIFT+5))
+
+/* keep 1st runtime pattern forever */
+#define PMf_KEEP (1<<(PMf_BASE_SHIFT+6))
+#define PMf_GLOBAL (1<<(PMf_BASE_SHIFT+7)) /* pattern had a g modifier */
+
+/* don't reset pos() if //g fails */
+#define PMf_CONTINUE (1<<(PMf_BASE_SHIFT+8))
+
+/* evaluating replacement as expr */
+#define PMf_EVAL (1<<(PMf_BASE_SHIFT+9))
+
+/* Return substituted string instead of modifying it. */
+#define PMf_NONDESTRUCT (1<<(PMf_BASE_SHIFT+10))
+
+#if PMf_BASE_SHIFT+10 > 31
+# error Too many PMf_ bits used. See above and regnodes.h for any spare in middle
+#endif
+
+/* mask of bits that need to be transfered to re->extflags */
+#define PMf_COMPILETIME (PMf_MULTILINE|PMf_SINGLELINE|PMf_LOCALE|PMf_FOLD|PMf_EXTENDED|PMf_KEEPCOPY)
#ifdef USE_ITHREADS
-# define PmopSTASHPV(o) ((o)->op_pmstashpv)
-# define PmopSTASHPV_set(o,pv) (PmopSTASHPV(o) = savesharedpv(pv))
+# define PmopSTASHPV(o) \
+ (((o)->op_pmflags & PMf_ONCE) ? (o)->op_pmstashstartu.op_pmstashpv : NULL)
+# if defined (DEBUGGING) && defined(__GNUC__) && !defined(PERL_GCC_BRACE_GROUPS_FORBIDDEN)
+# define PmopSTASHPV_set(o,pv) ({ \
+ assert((o)->op_pmflags & PMf_ONCE); \
+ ((o)->op_pmstashstartu.op_pmstashpv = savesharedpv(pv)); \
+ })
+# else
+# define PmopSTASHPV_set(o,pv) \
+ ((o)->op_pmstashstartu.op_pmstashpv = savesharedpv(pv))
+# endif
# define PmopSTASH(o) (PmopSTASHPV(o) \
- ? gv_stashpv(PmopSTASHPV(o),GV_ADD) : NULL)
+ ? gv_stashpv((o)->op_pmstashstartu.op_pmstashpv,GV_ADD) : NULL)
# define PmopSTASH_set(o,hv) PmopSTASHPV_set(o, ((hv) ? HvNAME_get(hv) : NULL))
# define PmopSTASH_free(o) PerlMemShared_free(PmopSTASHPV(o))
#else
-# define PmopSTASH(o) ((o)->op_pmstash)
-# define PmopSTASH_set(o,hv) ((o)->op_pmstash = (hv))
+# define PmopSTASH(o) \
+ (((o)->op_pmflags & PMf_ONCE) ? (o)->op_pmstashstartu.op_pmstash : NULL)
+# if defined (DEBUGGING) && defined(__GNUC__) && !defined(PERL_GCC_BRACE_GROUPS_FORBIDDEN)
+# define PmopSTASH_set(o,hv) ({ \
+ assert((o)->op_pmflags & PMf_ONCE); \
+ ((o)->op_pmstashstartu.op_pmstash = (hv)); \
+ })
+# else
+# define PmopSTASH_set(o,hv) ((o)->op_pmstashstartu.op_pmstash = (hv))
+# endif
# define PmopSTASHPV(o) (PmopSTASH(o) ? HvNAME_get(PmopSTASH(o)) : NULL)
- /* op_pmstash is not refcounted */
+ /* op_pmstashstartu.op_pmstash is not refcounted */
# define PmopSTASHPV_set(o,pv) PmopSTASH_set((o), gv_stashpv(pv,GV_ADD))
+/* Note that if this becomes non-empty, then S_forget_pmop in op.c will need
+ changing */
# define PmopSTASH_free(o)
#endif
#ifdef USE_ITHREADS
# define cGVOPx_gv(o) ((GV*)PAD_SVl(cPADOPx(o)->op_padix))
-# define IS_PADGV(v) (v && SvTYPE(v) == SVt_PVGV && GvIN_PAD(v))
+# define IS_PADGV(v) (v && SvTYPE(v) == SVt_PVGV && isGV_with_GP(v) \
+ && GvIN_PAD(v))
# define IS_PADCONST(v) (v && SvREADONLY(v))
# define cSVOPx_sv(v) (cSVOPx(v)->op_sv \
? cSVOPx(v)->op_sv : PAD_SVl((v)->op_targ))
#define cSVOPo_sv cSVOPx_sv(o)
#define kSVOP_sv cSVOPx_sv(kid)
-#define Nullop Null(OP*)
+#ifndef PERL_CORE
+# define Nullop ((OP*)NULL)
+#endif
/* Lowest byte-and-a-bit of PL_opargs */
#define OA_MARK 1
#define OA_SCALARREF 7
#define OA_OPTIONAL 8
+/* Op_REFCNT is a reference count at the head of each op tree: needed
+ * since the tree is shared between threads, and between cloned closure
+ * copies in the same thread. OP_REFCNT_LOCK/UNLOCK is used when modifying
+ * this count.
+ * The same mutex is used to protect the refcounts of the reg_trie_data
+ * and reg_ac_data structures, which are shared between duplicated
+ * regexes.
+ */
+
#ifdef USE_ITHREADS
# define OP_REFCNT_INIT MUTEX_INIT(&PL_op_mutex)
# ifdef PERL_CORE
#endif
#define OpREFCNT_set(o,n) ((o)->op_targ = (n))
-#define OpREFCNT_inc(o) ((o) ? (++(o)->op_targ, (o)) : NULL)
-#define OpREFCNT_dec(o) (--(o)->op_targ)
+#ifdef PERL_DEBUG_READONLY_OPS
+# define OpREFCNT_inc(o) Perl_op_refcnt_inc(aTHX_ o)
+# define OpREFCNT_dec(o) Perl_op_refcnt_dec(aTHX_ o)
+#else
+# define OpREFCNT_inc(o) ((o) ? (++(o)->op_targ, (o)) : NULL)
+# define OpREFCNT_dec(o) (--(o)->op_targ)
+#endif
/* flags used by Perl_load_module() */
-#define PERL_LOADMOD_DENY 0x1
-#define PERL_LOADMOD_NOIMPORT 0x2
-#define PERL_LOADMOD_IMPORT_OPS 0x4
+#define PERL_LOADMOD_DENY 0x1 /* no Module */
+#define PERL_LOADMOD_NOIMPORT 0x2 /* use Module () */
+#define PERL_LOADMOD_IMPORT_OPS 0x4 /* use Module (...) */
-/* used in perly.y */
+#if defined(PERL_IN_PERLY_C) || defined(PERL_IN_OP_C)
#define ref(o, type) doref(o, type, TRUE)
+#endif
/* no longer used anywhere in core */
#ifndef PERL_CORE
-#define cv_ckproto(cv, gv, p) cv_ckproto_len(cv, gv, p, p ? strlen(p) : 0)
+#define cv_ckproto(cv, gv, p) \
+ cv_ckproto_len((cv), (gv), (p), (p) ? strlen(p) : 0)
+#endif
+
+#ifdef PERL_CORE
+# define my(o) my_attrs((o), NULL)
#endif
#ifdef USE_REENTRANT_API
#if defined(PL_OP_SLAB_ALLOC)
#define NewOp(m,var,c,type) \
- (var = (type *) Perl_Slab_Alloc(aTHX_ m,c*sizeof(type)))
+ (var = (type *) Perl_Slab_Alloc(aTHX_ c*sizeof(type)))
#define NewOpSz(m,var,size) \
- (var = (OP *) Perl_Slab_Alloc(aTHX_ m,size))
+ (var = (OP *) Perl_Slab_Alloc(aTHX_ size))
#define FreeOp(p) Perl_Slab_Free(aTHX_ p)
#else
#define NewOp(m, var, c, type) \
#define FreeOp(p) PerlMemShared_free(p)
#endif
+struct block_hooks {
+ U32 bhk_flags;
+ void (*bhk_start) (pTHX_ int full);
+ void (*bhk_pre_end) (pTHX_ OP **seq);
+ void (*bhk_post_end) (pTHX_ OP **seq);
+ void (*bhk_eval) (pTHX_ OP *const saveop);
+};
+
+/*
+=head1 Compile-time scope hooks
+
+=for apidoc m|U32|BhkFLAGS|BHK *hk
+Return the BHK's flags.
+
+=for apidoc m|void *|BhkENTRY|BHK *hk|which
+Return an entry from the BHK structure. I<which> is a preprocessor token
+indicating which entry to return. If the appropriate flag is not set
+this will return NULL. The type of the return value depends on which
+entry you ask for.
+
+=for apidoc Am|void|BhkENTRY_set|BHK *hk|which|void *ptr
+Set an entry in the BHK structure, and set the flags to indicate it is
+valid. I<which> is a preprocessing token indicating which entry to set.
+The type of I<ptr> depends on the entry.
+
+=for apidoc Am|void|BhkDISABLE|BHK *hk|which
+Temporarily disable an entry in this BHK structure, by clearing the
+appropriate flag. I<which> is a preprocessor token indicating which
+entry to disable.
+
+=for apidoc Am|void|BhkENABLE|BHK *hk|which
+Re-enable an entry in this BHK structure, by setting the appropriate
+flag. I<which> is a preprocessor token indicating which entry to enable.
+This will assert (under -DDEBUGGING) if the entry doesn't contain a valid
+pointer.
+
+=for apidoc m|void|CALL_BLOCK_HOOKS|which|arg
+Call all the registered block hooks for type I<which>. I<which> is a
+preprocessing token; the type of I<arg> depends on I<which>.
+
+=cut
+*/
+
+#define BhkFLAGS(hk) ((hk)->bhk_flags)
+
+#define BHKf_start 0x01
+#define BHKf_pre_end 0x02
+#define BHKf_post_end 0x04
+#define BHKf_eval 0x08
+
+#define BhkENTRY(hk, which) \
+ ((BhkFLAGS(hk) & BHKf_ ## which) ? ((hk)->bhk_ ## which) : NULL)
+
+#define BhkENABLE(hk, which) \
+ STMT_START { \
+ BhkFLAGS(hk) |= BHKf_ ## which; \
+ assert(BhkENTRY(hk, which)); \
+ } STMT_END
+
+#define BhkDISABLE(hk, which) \
+ STMT_START { \
+ BhkFLAGS(hk) &= ~(BHKf_ ## which); \
+ } STMT_END
+
+#define BhkENTRY_set(hk, which, ptr) \
+ STMT_START { \
+ (hk)->bhk_ ## which = ptr; \
+ BhkENABLE(hk, which); \
+ } STMT_END
+
+#define CALL_BLOCK_HOOKS(which, arg) \
+ STMT_START { \
+ if (PL_blockhooks) { \
+ I32 i; \
+ for (i = av_len(PL_blockhooks); i >= 0; i--) { \
+ SV *sv = AvARRAY(PL_blockhooks)[i]; \
+ BHK *hk; \
+ \
+ assert(SvIOK(sv)); \
+ if (SvUOK(sv)) \
+ hk = INT2PTR(BHK *, SvUVX(sv)); \
+ else \
+ hk = INT2PTR(BHK *, SvIVX(sv)); \
+ \
+ if (BhkENTRY(hk, which)) \
+ CALL_FPTR(BhkENTRY(hk, which))(aTHX_ arg); \
+ } \
+ } \
+ } STMT_END
+
#ifdef PERL_MAD
# define MAD_NULL 1
# define MAD_PV 2
MADPROP* tk_mad;
};
#endif
+
+/*
+ * Values that can be held by mad_key :
+ * ^ unfilled head spot
+ * , literal ,
+ * ; literal ; (blank if implicit ; at end of block)
+ * : literal : from ?: or attr list
+ * + unary +
+ * ? literal ? from ?:
+ * ( literal (
+ * ) literal )
+ * [ literal [
+ * ] literal ]
+ * { literal {
+ * } literal }
+ * @ literal @ sigil
+ * $ literal $ sigil
+ * * literal * sigil
+ * ! use is source filtered
+ * & & or sub
+ * # whitespace/comment following ; or }
+ * # $# sigil
+ * 1 1st ; from for(;;)
+ * 1 retired protasis
+ * 2 2nd ; from for(;;)
+ * 2 retired apodosis
+ * 3 C-style for list
+ * a sub or var attributes
+ * a non-method arrow operator
+ * A method arrow operator
+ * A use import args
+ * b format block
+ * B retired stub block
+ * C constant conditional op
+ * d declarator
+ * D do block
+ * e unreached "else" (see C)
+ * e expression producing E
+ * E tr/E/R/, /E/
+ * f folded constant op
+ * F peg op for format
+ * g op was forced to be a word
+ * i if/unless modifier
+ * I if/elsif/unless statement
+ * k local declarator
+ * K retired kid op
+ * l last index of array ($#foo)
+ * L label
+ * m modifier on regex
+ * n sub or format name
+ * o current operator/declarator name
+ * o else/continue
+ * O generic optimized op
+ * p peg to hold extra whitespace at statement level
+ * P peg op for package declaration
+ * q opening quote
+ * = quoted material
+ * Q closing quote
+ * Q optimized qw//
+ * r expression producing R
+ * R tr/E/R/ s/E/R/
+ * s sub signature
+ * S use import stub (no import)
+ * S retired sort block
+ * t unreached "then" (see C)
+ * U use import op
+ * v private sv of for loop
+ * V use version
+ * w while/until modifier
+ * W while/for statement
+ * x optimized qw
+ * X random thing
+ * _ whitespace/comments preceding anything else
+ * ~ =~ operator
+ */
+
+/*
+ * Local variables:
+ * c-indentation-style: bsd
+ * c-basic-offset: 4
+ * indent-tabs-mode: t
+ * End:
+ *
+ * ex: set ts=8 sts=4 sw=4 noet:
+ */
https://perl5.git.perl.org / perl5.git / blobdiff