/* Package name : perl5
* Source directory :
- * Configuration time: Wed Sep 17 14:09:08 2014
+ * Configuration time: Tue Oct 17 08:44:03 2017
* Configured by : shay
* Target system :
*/
*/
#define HAS_ALARM /**/
-/* HAS_BCMP:
- * This symbol is defined if the bcmp() routine is available to
- * compare blocks of memory.
+/* HAS_CBRT:
+ * This symbol, if defined, indicates that the cbrt() (cube root)
+ * function is available.
*/
-/*#define HAS_BCMP / **/
-
-/* HAS_BCOPY:
- * This symbol is defined if the bcopy() routine is available to
- * copy blocks of memory.
- */
-/*#define HAS_BCOPY / **/
-
-/* HAS_BZERO:
- * This symbol is defined if the bzero() routine is available to
- * set a memory block to 0.
- */
-/*#define HAS_BZERO / **/
+#define HAS_CBRT /**/
/* HAS_CHOWN:
* This symbol, if defined, indicates that the chown routine is
*/
/*#define HAS_CUSERID / **/
-/* HAS_DBL_DIG:
- * This symbol, if defined, indicates that this system's <float.h>
- * or <limits.h> defines the symbol DBL_DIG, which is the number
- * of significant digits in a double precision number. If this
- * symbol is not defined, a guess of 15 is usually pretty good.
- */
-#define HAS_DBL_DIG /**/
-
/* HAS_DIFFTIME:
* This symbol, if defined, indicates that the difftime routine is
* available.
#define HAS_GETLOGIN /**/
/* HAS_GETPGID:
- * This symbol, if defined, indicates to the C program that
+ * This symbol, if defined, indicates to the C program that
* the getpgid(pid) function is available to get the
* process group id.
*/
*/
#define HAS_MBTOWC /**/
-/* HAS_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * to compare blocks of memory.
- */
-#define HAS_MEMCMP /**/
-
-/* HAS_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy blocks of memory.
- */
-#define HAS_MEMCPY /**/
-
-/* HAS_MEMMOVE:
- * This symbol, if defined, indicates that the memmove routine is available
- * to copy potentially overlapping blocks of memory. This should be used
- * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
- * own version.
- */
-#define HAS_MEMMOVE /**/
-
-/* HAS_MEMSET:
- * This symbol, if defined, indicates that the memset routine is available
- * to set blocks of memory.
- */
-#define HAS_MEMSET /**/
-
/* HAS_MKDIR:
* This symbol, if defined, indicates that the mkdir routine is available
* to create directories. Otherwise you should fork off a new process to
*/
/*#define HAS_READLINK / **/
+/* HAS_REGCOMP:
+ * This symbol, if defined, indicates that the regcomp() routine is
+ * available to do some regular patern matching (usually on POSIX.2
+ * conforming systems).
+ */
+/*#define HAS_REGCOMP / * POSIX.2 */
+
/* HAS_RENAME:
* This symbol, if defined, indicates that the rename routine is available
* to rename files. Otherwise you should do the unlink(), link(), unlink()
*/
/*#define HAS_SETSID / **/
-/* HAS_STRCHR:
- * This symbol is defined to indicate that the strchr()/strrchr()
- * functions are available for string searching. If not, try the
- * index()/rindex() pair.
+/* HAS_STAT:
+ * This symbol, if defined, indicates that the stat routine is
+ * available to get file status.
*/
-/* HAS_INDEX:
- * This symbol is defined to indicate that the index()/rindex()
- * functions are available for string searching.
- */
-#define HAS_STRCHR /**/
-/*#define HAS_INDEX / **/
+#define HAS_STAT /**/
/* HAS_STRCOLL:
* This symbol, if defined, indicates that the strcoll routine is
* This symbol holds the type used for the second argument to
* getgroups() and setgroups(). Usually, this is the same as
* gidtype (gid_t) , but sometimes it isn't.
- * It can be int, ushort, gid_t, etc...
- * It may be necessary to include <sys/types.h> to get any
+ * It can be int, ushort, gid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
* typedef'ed information. This is only required if you have
* getgroups() or setgroups()..
*/
*/
#define I_FCNTL /**/
-/* I_FLOAT:
- * This symbol, if defined, indicates to the C program that it should
- * include <float.h> to get definition of symbols like DBL_MAX or
- * DBL_MIN, i.e. machine dependent floating point values.
- */
-#define I_FLOAT /**/
-
/* I_GDBM:
* This symbol, if defined, indicates that <gdbm.h> exists and should
* be included.
*/
/*#define I_GDBM / **/
-/* I_LIMITS:
- * This symbol, if defined, indicates to the C program that it should
- * include <limits.h> to get definition of symbols like WORD_BIT or
- * LONG_MAX, i.e. machine dependant limitations.
- */
-#define I_LIMITS /**/
-
/* I_LOCALE:
* This symbol, if defined, indicates to the C program that it should
* include <locale.h>.
*/
#define I_LOCALE /**/
-/* I_MATH:
- * This symbol, if defined, indicates to the C program that it should
- * include <math.h>.
- */
-#define I_MATH /**/
-
-/* I_MEMORY:
- * This symbol, if defined, indicates to the C program that it should
- * include <memory.h>.
- */
-/*#define I_MEMORY / **/
-
/* I_NETINET_IN:
* This symbol, if defined, indicates to the C program that it should
* include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
*/
/*#define I_NETINET_IN / **/
-/* I_STDDEF:
- * This symbol, if defined, indicates that <stddef.h> exists and should
- * be included.
- */
-#define I_STDDEF /**/
-
-/* I_STDLIB:
- * This symbol, if defined, indicates that <stdlib.h> exists and should
- * be included.
- */
-#define I_STDLIB /**/
-
-/* I_STRING:
- * This symbol, if defined, indicates to the C program that it should
- * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
- */
-#define I_STRING /**/
-
/* I_SYS_DIR:
* This symbol, if defined, indicates to the C program that it should
* include <sys/dir.h>.
*/
#define I_UTIME /**/
-/* I_VALUES:
- * This symbol, if defined, indicates to the C program that it should
- * include <values.h> to get definition of symbols like MINFLOAT or
- * MAXLONG, i.e. machine dependant limitations. Probably, you
- * should use <limits.h> instead, if it is available.
- */
-/*#define I_VALUES / **/
-
/* I_VFORK:
* This symbol, if defined, indicates to the C program that it should
* include vfork.h.
*/
/*#define I_VFORK / **/
-/* CAN_VAPROTO:
- * This variable is defined on systems supporting prototype declaration
- * of functions with a variable number of arguments.
- */
-/* _V:
- * This macro is used to declare function parameters in prototypes for
- * functions with a variable number of parameters. Use double parentheses.
- * For example:
- *
- * int printf _V((char *fmt, ...));
- *
- * Remember to use the plain simple _() macro when declaring a function
- * with no variable number of arguments, since it might be possible to
- * have a non-effect _V() macro and still get prototypes via _().
+/* STDCHAR:
+ * This symbol is defined to be the type of char used in stdio.h.
+ * It has the values "unsigned char" or "char".
*/
-/*#define CAN_VAPROTO / **/
-#ifdef CAN_VAPROTO
-#define _V(args) args
-#else
-#define _V(args) ()
-#endif
+#define STDCHAR char /**/
-/* OSNAME:
- * This symbol contains the name of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
+/* INTSIZE:
+ * This symbol contains the value of sizeof(int) so that the C
+ * preprocessor can make decisions based on it.
*/
-/* OSVERS:
- * This symbol contains the version of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
+/* LONGSIZE:
+ * This symbol contains the value of sizeof(long) so that the C
+ * preprocessor can make decisions based on it.
*/
-#define OSNAME "MSWin32" /**/
-#define OSVERS "6.1" /**/
+/* SHORTSIZE:
+ * This symbol contains the value of sizeof(short) so that the C
+ * preprocessor can make decisions based on it.
+ */
+#define INTSIZE 4 /**/
+#define LONGSIZE 4 /**/
+#define SHORTSIZE 2 /**/
/* MULTIARCH:
* This symbol, if defined, signifies that the build
*/
/*#define MULTIARCH / **/
-/* MEM_ALIGNBYTES:
- * This symbol contains the number of bytes required to align a
- * double, or a long double when applicable. Usual values are 2,
- * 4 and 8. The default is eight, for safety. For cross-compiling
- * or multiarch support, Configure will set a minimum of 8.
+/* HAS_QUAD:
+ * This symbol, if defined, tells that there's a 64-bit integer type,
+ * Quad_t, and its unsigned counterpart, Uquad_t. QUADKIND will be one
+ * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, QUAD_IS_INT64_T,
+ * or QUAD_IS___INT64.
*/
-#define MEM_ALIGNBYTES 8
+#define HAS_QUAD /**/
+#ifdef HAS_QUAD
+# define Quad_t long long /**/
+# define Uquad_t unsigned long long /**/
+# define QUADKIND 3 /**/
+# define QUAD_IS_INT 1
+# define QUAD_IS_LONG 2
+# define QUAD_IS_LONG_LONG 3
+# define QUAD_IS_INT64_T 4
+# define QUAD_IS___INT64 5
+#endif
-/* ARCHLIB:
- * This variable, if defined, holds the name of the directory in
- * which the user wants to put architecture-dependent public
- * library files for perl5. It is most often a local directory
- * such as /usr/local/lib. Programs using this variable must be
- * prepared to deal with filename expansion. If ARCHLIB is the
- * same as PRIVLIB, it is not defined, since presumably the
- * program already searches PRIVLIB.
- */
-/* ARCHLIB_EXP:
- * This symbol contains the ~name expanded version of ARCHLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_ACCESSX:
+ * This symbol, if defined, indicates that the accessx routine is
+ * available to do extended access checks.
*/
-#define ARCHLIB "c:\\perl\\lib" /**/
-/*#define ARCHLIB_EXP "" / **/
+/*#define HAS_ACCESSX / **/
-/* ARCHNAME:
- * This symbol holds a string representing the architecture name.
- * It may be used to construct an architecture-dependant pathname
- * where library files may be held under a private library, for
- * instance.
+/* HAS_EACCESS:
+ * This symbol, if defined, indicates that the eaccess routine is
+ * available to do extended access checks.
*/
-#define ARCHNAME "MSWin32-x86" /**/
+/*#define HAS_EACCESS / **/
-/* BIN:
- * This symbol holds the path of the bin directory where the package will
- * be installed. Program must be prepared to deal with ~name substitution.
- */
-/* BIN_EXP:
- * This symbol is the filename expanded version of the BIN symbol, for
- * programs that do not want to deal with that at run-time.
- */
-/* PERL_RELOCATABLE_INC:
- * This symbol, if defined, indicates that we'd like to relocate entries
- * in @INC at run time based on the location of the perl binary.
+/* I_SYS_ACCESS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/access.h>.
*/
-#define BIN "c:\\perl\\bin" /**/
-#define BIN_EXP "c:\\perl\\bin" /**/
-#define PERL_RELOCATABLE_INC "undef" /**/
+/*#define I_SYS_ACCESS / **/
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
+/* I_SYS_SECURITY:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/security.h>.
*/
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
+/*#define I_SYS_SECURITY / **/
+
+/* MEM_ALIGNBYTES:
+ * This symbol contains the number of bytes required to align a
+ * double, or a long double when applicable. Usual values are 2,
+ * 4 and 8. The default is eight, for safety. For cross-compiling
+ * or multiarch support, Configure will set a minimum of 8.
*/
-#define INTSIZE 4 /**/
-#define LONGSIZE 4 /**/
-#define SHORTSIZE 2 /**/
+#define MEM_ALIGNBYTES 8
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
*/
#define CHARBITS 8 /**/
-/* CAT2:
- * This macro concatenates 2 tokens together.
- */
-/* STRINGIFY:
- * This macro surrounds its token with double quotes.
+/* CASTI32:
+ * This symbol is defined if the C compiler can cast negative
+ * or large floating point numbers to 32-bit ints.
*/
-#if 42 == 1
-#define CAT2(a,b) a/**/b
-#undef STRINGIFY
-#define STRINGIFY(a) "a"
-#endif
-#if 42 == 42
-#define PeRl_CaTiFy(a, b) a ## b
-#define PeRl_StGiFy(a) #a
-#define CAT2(a,b) PeRl_CaTiFy(a,b)
-#define StGiFy(a) PeRl_StGiFy(a)
-#undef STRINGIFY
-#define STRINGIFY(a) PeRl_StGiFy(a)
-#endif
-#if 42 != 1 && 42 != 42
-#include "Bletch: How does this C preprocessor concatenate tokens?"
-#endif
+#define CASTI32 /**/
-/* CPPSTDIN:
- * This symbol contains the first part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. Typical value of "cc -E" or "/lib/cpp", but it can also
- * call a wrapper. See CPPRUN.
- */
-/* CPPMINUS:
- * This symbol contains the second part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. This symbol will have the value "-" if CPPSTDIN needs a minus
- * to specify standard input, otherwise the value is "".
- */
-/* CPPRUN:
- * This symbol contains the string which will invoke a C preprocessor on
- * the standard input and produce to standard output. It needs to end
- * with CPPLAST, after all other preprocessor flags have been specified.
- * The main difference with CPPSTDIN is that this program will never be a
- * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
- * available directly to the user. Note that it may well be different from
- * the preprocessor used to compile the C program.
+/* CASTNEGFLOAT:
+ * This symbol is defined if the C compiler can cast negative
+ * numbers to unsigned longs, ints and shorts.
*/
-/* CPPLAST:
- * This symbol is intended to be used along with CPPRUN in the same manner
- * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
+/* CASTFLAGS:
+ * This symbol contains flags that say what difficulties the compiler
+ * has casting odd floating values to unsigned long:
+ * 0 = ok
+ * 1 = couldn't cast < 0
+ * 2 = couldn't cast >= 0x80000000
+ * 4 = couldn't cast in argument expression list
*/
-#define CPPSTDIN "gcc -E"
-#define CPPMINUS "-"
-#define CPPRUN "gcc -E"
-#define CPPLAST ""
+#define CASTNEGFLOAT /**/
+#define CASTFLAGS 0 /**/
-/* HAS_ACCESS:
- * This manifest constant lets the C program know that the access()
- * system call is available to check for accessibility using real UID/GID.
- * (always present on UNIX.)
+/* VOID_CLOSEDIR:
+ * This symbol, if defined, indicates that the closedir() routine
+ * does not return a value.
*/
-#define HAS_ACCESS /**/
+/*#define VOID_CLOSEDIR / **/
-/* HAS_ACCESSX:
- * This symbol, if defined, indicates that the accessx routine is
- * available to do extended access checks.
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
*/
-/*#define HAS_ACCESSX / **/
+#define HAS_FD_SET /**/
-/* HAS_ASCTIME_R:
- * This symbol, if defined, indicates that the asctime_r routine
- * is available to asctime re-entrantly.
- */
-/* ASCTIME_R_PROTO:
- * This symbol encodes the prototype of asctime_r.
- * It is zero if d_asctime_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r
- * is defined.
+/* Gconvert:
+ * This preprocessor macro is defined to convert a floating point
+ * number to a string without a trailing decimal point. This
+ * emulates the behavior of sprintf("%g"), but is sometimes much more
+ * efficient. If gconvert() is not available, but gcvt() drops the
+ * trailing decimal point, then gcvt() is used. If all else fails,
+ * a macro using sprintf("%g") is used. Arguments for the Gconvert
+ * macro are: value, number of digits, whether trailing zeros should
+ * be retained, and the output buffer.
+ * The usual values are:
+ * d_Gconvert='gconvert((x),(n),(t),(b))'
+ * d_Gconvert='gcvt((x),(n),(b))'
+ * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ * The last two assume trailing zeros should not be kept.
*/
-/*#define HAS_ASCTIME_R / **/
-#define ASCTIME_R_PROTO 0 /**/
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
-/* The HASATTRIBUTE_* defines are left undefined here because they vary from
- * one version of GCC to another. Instead, they are defined on the basis of
- * the compiler version in <perl.h>.
+/* HAS_GETPAGESIZE:
+ * This symbol, if defined, indicates that the getpagesize system call
+ * is available to get system page size, which is the granularity of
+ * many memory management calls.
*/
-/* HASATTRIBUTE_FORMAT:
- * Can we handle GCC attribute for checking printf-style formats
+/*#define HAS_GETPAGESIZE / **/
+
+/* HAS_GNULIBC:
+ * This symbol, if defined, indicates to the C program that
+ * the GNU C library is being used. A better check is to use
+ * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
*/
-/* PRINTF_FORMAT_NULL_OK:
- * Allows __printf__ format to be null when checking printf-style
+/*#define HAS_GNULIBC / **/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+# define _GNU_SOURCE
+#endif
+
+/* HAS_ISASCII:
+ * This manifest constant lets the C program know that isascii
+ * is available.
*/
-/* HASATTRIBUTE_MALLOC:
- * Can we handle GCC attribute for malloc-style functions.
+#define HAS_ISASCII /**/
+
+/* HAS_LCHOWN:
+ * This symbol, if defined, indicates that the lchown routine is
+ * available to operate on a symbolic link (instead of following the
+ * link).
*/
-/* HASATTRIBUTE_NONNULL:
- * Can we handle GCC attribute for nonnull function parms.
+/*#define HAS_LCHOWN / **/
+
+/* HAS_OPEN3:
+ * This manifest constant lets the C program know that the three
+ * argument form of open(2) is available.
*/
-/* HASATTRIBUTE_NORETURN:
- * Can we handle GCC attribute for functions that do not return
+/*#define HAS_OPEN3 / **/
+
+/* HAS_SIGACTION:
+ * This symbol, if defined, indicates that Vr4's sigaction() routine
+ * is available.
*/
-/* HASATTRIBUTE_PURE:
- * Can we handle GCC attribute for pure functions
+/*#define HAS_SIGACTION / **/
+
+/* HAS_SIGINFO_SI_ERRNO:
+ * This symbol, if defined, indicates that siginfo_t has the
+ * si_errno member
*/
-/* HASATTRIBUTE_UNUSED:
- * Can we handle GCC attribute for unused variables and arguments
+/* HAS_SIGINFO_SI_PID:
+ * This symbol, if defined, indicates that siginfo_t has the
+ * si_pid member
*/
-/* HASATTRIBUTE_DEPRECATED:
- * Can we handle GCC attribute for marking deprecated APIs
+/* HAS_SIGINFO_SI_UID:
+ * This symbol, if defined, indicates that siginfo_t has the
+ * si_uid member
*/
-/* HASATTRIBUTE_WARN_UNUSED_RESULT:
- * Can we handle GCC attribute for warning on unused results
+/* HAS_SIGINFO_SI_ADDR:
+ * This symbol, if defined, indicates that siginfo_t has the
+ * si_addr member
*/
-/*#define HASATTRIBUTE_DEPRECATED / **/
-/*#define HASATTRIBUTE_FORMAT / **/
-/*#define PRINTF_FORMAT_NULL_OK / **/
-/*#define HASATTRIBUTE_NORETURN / **/
-/*#define HASATTRIBUTE_MALLOC / **/
-/*#define HASATTRIBUTE_NONNULL / **/
-/*#define HASATTRIBUTE_PURE / **/
-/*#define HASATTRIBUTE_UNUSED / **/
-/*#define HASATTRIBUTE_WARN_UNUSED_RESULT / **/
-
-/* HAS_BACKTRACE:
- * This symbol, if defined, indicates that the backtrace() routine is
- * available to get a stack trace. The <execinfo.h> header must be
- * included to use this routine.
+/* HAS_SIGINFO_SI_STATUS:
+ * This symbol, if defined, indicates that siginfo_t has the
+ * si_status member
*/
-/*#define HAS_BACKTRACE / **/
-
-/* CASTI32:
- * This symbol is defined if the C compiler can cast negative
- * or large floating point numbers to 32-bit ints.
+/* HAS_SIGINFO_SI_BAND:
+ * This symbol, if defined, indicates that siginfo_t has the
+ * si_band member
*/
-#define CASTI32 /**/
+/* HAS_SIGINFO_SI_VALUE:
+ * This symbol, if defined, indicates that siginfo_t has the
+ * si_value member
+ */
+/*#define HAS_SIGINFO_SI_ERRNO / **/
+/*#define HAS_SIGINFO_SI_PID / **/
+/*#define HAS_SIGINFO_SI_UID / **/
+/*#define HAS_SIGINFO_SI_ADDR / **/
+/*#define HAS_SIGINFO_SI_STATUS / **/
+/*#define HAS_SIGINFO_SI_BAND / **/
+/*#define HAS_SIGINFO_SI_VALUE / **/
-/* CASTNEGFLOAT:
- * This symbol is defined if the C compiler can cast negative
- * numbers to unsigned longs, ints and shorts.
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
*/
-/* CASTFLAGS:
- * This symbol contains flags that say what difficulties the compiler
- * has casting odd floating values to unsigned long:
- * 0 = ok
- * 1 = couldn't cast < 0
- * 2 = couldn't cast >= 0x80000000
- * 4 = couldn't cast in argument expression list
+/* Sigjmp_buf:
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
*/
-#define CASTNEGFLOAT /**/
-#define CASTFLAGS 0 /**/
-
-/* VOID_CLOSEDIR:
- * This symbol, if defined, indicates that the closedir() routine
- * does not return a value.
+/* Sigsetjmp:
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ * See HAS_SIGSETJMP.
*/
-/*#define VOID_CLOSEDIR / **/
-
-/* HASCONST:
- * This symbol, if defined, indicates that this C compiler knows about
- * the const type. There is no need to actually test for that symbol
- * within your programs. The mere use of the "const" keyword will
- * trigger the necessary tests.
+/* Siglongjmp:
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ * See HAS_SIGSETJMP.
*/
-#define HASCONST /**/
-#ifndef HASCONST
-#define const
+/*#define HAS_SIGSETJMP / **/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf
+#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
+#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
+#else
+#define Sigjmp_buf jmp_buf
+#define Sigsetjmp(buf,save_mask) setjmp((buf))
+#define Siglongjmp(buf,retval) longjmp((buf),(retval))
#endif
-/* HAS_CRYPT_R:
- * This symbol, if defined, indicates that the crypt_r routine
- * is available to crypt re-entrantly.
+/* HAS_STATIC_INLINE:
+ * This symbol, if defined, indicates that the C compiler supports
+ * C99-style static inline. That is, the function can't be called
+ * from another translation unit.
*/
-/* CRYPT_R_PROTO:
- * This symbol encodes the prototype of crypt_r.
- * It is zero if d_crypt_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r
- * is defined.
+/* PERL_STATIC_INLINE:
+ * This symbol gives the best-guess incantation to use for static
+ * inline functions. If HAS_STATIC_INLINE is defined, this will
+ * give C99-style inline. If HAS_STATIC_INLINE is not defined,
+ * this will give a plain 'static'. It will always be defined
+ * to something that gives static linkage.
+ * Possibilities include
+ * static inline (c99)
+ * static __inline__ (gcc -ansi)
+ * static __inline (MSVC)
+ * static _inline (older MSVC)
+ * static (c89 compilers)
*/
-/*#define HAS_CRYPT_R / **/
-#define CRYPT_R_PROTO 0 /**/
+#define HAS_STATIC_INLINE /**/
+#define PERL_STATIC_INLINE static __inline__ /**/
-/* HAS_CSH:
- * This symbol, if defined, indicates that the C-shell exists.
+/* USE_STDIO_PTR:
+ * This symbol is defined if the _ptr and _cnt fields (or similar)
+ * of the stdio FILE structure can be used to access the stdio buffer
+ * for a file handle. If this is defined, then the FILE_ptr(fp)
+ * and FILE_cnt(fp) macros will also be defined and should be used
+ * to access these fields.
*/
-/* CSH:
- * This symbol, if defined, contains the full pathname of csh.
+/* FILE_ptr:
+ * This macro is used to access the _ptr field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
*/
-/*#define HAS_CSH / **/
-#ifdef HAS_CSH
-#define CSH "" /**/
-#endif
-
-/* HAS_CTERMID_R:
- * This symbol, if defined, indicates that the ctermid_r routine
- * is available to ctermid re-entrantly.
+/* STDIO_PTR_LVALUE:
+ * This symbol is defined if the FILE_ptr macro can be used as an
+ * lvalue.
*/
-/* CTERMID_R_PROTO:
- * This symbol encodes the prototype of ctermid_r.
- * It is zero if d_ctermid_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctermid_r
- * is defined.
+/* FILE_cnt:
+ * This macro is used to access the _cnt field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
*/
-/*#define HAS_CTERMID_R / **/
-#define CTERMID_R_PROTO 0 /**/
-
-/* HAS_CTIME_R:
- * This symbol, if defined, indicates that the ctime_r routine
- * is available to ctime re-entrantly.
+/* STDIO_CNT_LVALUE:
+ * This symbol is defined if the FILE_cnt macro can be used as an
+ * lvalue.
*/
-/* CTIME_R_PROTO:
- * This symbol encodes the prototype of ctime_r.
- * It is zero if d_ctime_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r
- * is defined.
+/* STDIO_PTR_LVAL_SETS_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n has the side effect of decreasing the
+ * value of File_cnt(fp) by n.
*/
-/*#define HAS_CTIME_R / **/
-#define CTIME_R_PROTO 0 /**/
-
-/* HAS_DLADDR:
- * This symbol, if defined, indicates that the dladdr() routine is
- * available to query dynamic linker information for an address.
- * The <dlfcn.h> header must be included to use this routine.
+/* STDIO_PTR_LVAL_NOCHANGE_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n leaves File_cnt(fp) unchanged.
*/
-/*#define HAS_DLADDR / **/
+#define USE_STDIO_PTR /**/
+#ifdef USE_STDIO_PTR
+#define FILE_ptr(fp) ((fp)->_ptr)
+#define STDIO_PTR_LVALUE /**/
+#define FILE_cnt(fp) ((fp)->_cnt)
+#define STDIO_CNT_LVALUE /**/
+/*#define STDIO_PTR_LVAL_SETS_CNT / **/
+#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/
+#endif
-/* SETUID_SCRIPTS_ARE_SECURE_NOW:
- * This symbol, if defined, indicates that the bug that prevents
- * setuid scripts from being secure is not present in this kernel.
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
*/
-/* DOSUID:
- * This symbol, if defined, indicates that the C program should
- * check the script that it is executing for setuid/setgid bits, and
- * attempt to emulate setuid/setgid on systems that have disabled
- * setuid #! scripts because the kernel can't do it securely.
- * It is up to the package designer to make sure that this emulation
- * is done securely. Among other things, it should do an fstat on
- * the script it just opened to make sure it really is a setuid/setgid
- * script, it should make sure the arguments passed correspond exactly
- * to the argument on the #! line, and it should not trust any
- * subprocesses to which it must pass the filename rather than the
- * file descriptor of the script to be executed.
- */
-/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
-/*#define DOSUID / **/
-
-/* HAS_DRAND48_R:
- * This symbol, if defined, indicates that the drand48_r routine
- * is available to drand48 re-entrantly.
+/* FILE_base:
+ * This macro is used to access the _base field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_BASE is defined.
*/
-/* DRAND48_R_PROTO:
- * This symbol encodes the prototype of drand48_r.
- * It is zero if d_drand48_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r
- * is defined.
+/* FILE_bufsiz:
+ * This macro is used to determine the number of bytes in the I/O
+ * buffer pointed to by _base field (or equivalent) of the FILE
+ * structure pointed to its argument. This macro will always be defined
+ * if USE_STDIO_BASE is defined.
*/
-/*#define HAS_DRAND48_R / **/
-#define DRAND48_R_PROTO 0 /**/
+#define USE_STDIO_BASE /**/
+#ifdef USE_STDIO_BASE
+#define FILE_base(fp) ((fp)->_base)
+#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
+#endif
-/* HAS_DRAND48_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the drand48() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern double drand48(void);
+/* DOUBLESIZE:
+ * This symbol contains the size of a double, so that the C preprocessor
+ * can make decisions based on it.
*/
-/*#define HAS_DRAND48_PROTO / **/
+#define DOUBLESIZE 8 /**/
-/* HAS_EACCESS:
- * This symbol, if defined, indicates that the eaccess routine is
- * available to do extended access checks.
+/* I_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <time.h>.
*/
-/*#define HAS_EACCESS / **/
-
-/* HAS_ENDGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the group database.
+/* I_SYS_TIME:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h>.
*/
-/*#define HAS_ENDGRENT / **/
-
-/* HAS_ENDGRENT_R:
- * This symbol, if defined, indicates that the endgrent_r routine
- * is available to endgrent re-entrantly.
+/* I_SYS_TIME_KERNEL:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/time.h> with KERNEL defined.
*/
-/* ENDGRENT_R_PROTO:
- * This symbol encodes the prototype of endgrent_r.
- * It is zero if d_endgrent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r
- * is defined.
+/* HAS_TM_TM_ZONE:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_zone field.
*/
-/*#define HAS_ENDGRENT_R / **/
-#define ENDGRENT_R_PROTO 0 /**/
-
-/* HAS_ENDHOSTENT:
- * This symbol, if defined, indicates that the endhostent() routine is
- * available to close whatever was being used for host queries.
+/* HAS_TM_TM_GMTOFF:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_gmtoff field.
*/
-/*#define HAS_ENDHOSTENT / **/
+#define I_TIME /**/
+/*#define I_SYS_TIME / **/
+/*#define I_SYS_TIME_KERNEL / **/
+/*#define HAS_TM_TM_ZONE / **/
+/*#define HAS_TM_TM_GMTOFF / **/
-/* HAS_ENDHOSTENT_R:
- * This symbol, if defined, indicates that the endhostent_r routine
- * is available to endhostent re-entrantly.
+/* VAL_O_NONBLOCK:
+ * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ * non-blocking I/O for the file descriptor. Note that there is no way
+ * back, i.e. you cannot turn it blocking again this way. If you wish to
+ * alternatively switch between blocking and non-blocking, use the
+ * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
*/
-/* ENDHOSTENT_R_PROTO:
- * This symbol encodes the prototype of endhostent_r.
- * It is zero if d_endhostent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endhostent_r
- * is defined.
+/* VAL_EAGAIN:
+ * This symbol holds the errno error code set by read() when no data was
+ * present on the non-blocking file descriptor.
*/
-/*#define HAS_ENDHOSTENT_R / **/
-#define ENDHOSTENT_R_PROTO 0 /**/
+/* RD_NODATA:
+ * This symbol holds the return code from read() when no data is present
+ * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ * not defined, then you can't distinguish between no data and EOF by
+ * issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ * This symbol, if defined, indicates to the C program that a read() on
+ * a non-blocking file descriptor will return 0 on EOF, and not the value
+ * held in RD_NODATA (-1 usually, in that case!).
+ */
+#define VAL_O_NONBLOCK O_NONBLOCK
+#define VAL_EAGAIN EAGAIN
+#define RD_NODATA -1
+#define EOF_NONBLOCK
-/* HAS_ENDNETENT:
- * This symbol, if defined, indicates that the endnetent() routine is
- * available to close whatever was being used for network queries.
+/* PTRSIZE:
+ * This symbol contains the size of a pointer, so that the C preprocessor
+ * can make decisions based on it. It will be sizeof(void *) if
+ * the compiler supports (void *); otherwise it will be
+ * sizeof(char *).
*/
-/*#define HAS_ENDNETENT / **/
+#define PTRSIZE 4 /**/
-/* HAS_ENDNETENT_R:
- * This symbol, if defined, indicates that the endnetent_r routine
- * is available to endnetent re-entrantly.
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in its headers.
+ * See HAS_DRAND48_PROTO.
*/
-/* ENDNETENT_R_PROTO:
- * This symbol encodes the prototype of endnetent_r.
- * It is zero if d_endnetent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endnetent_r
- * is defined.
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
*/
-/*#define HAS_ENDNETENT_R / **/
-#define ENDNETENT_R_PROTO 0 /**/
-
-/* HAS_ENDPROTOENT:
- * This symbol, if defined, indicates that the endprotoent() routine is
- * available to close whatever was being used for protocol queries.
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
*/
-/*#define HAS_ENDPROTOENT / **/
-
-/* HAS_ENDPROTOENT_R:
- * This symbol, if defined, indicates that the endprotoent_r routine
- * is available to endprotoent re-entrantly.
+/* RANDBITS:
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
*/
-/* ENDPROTOENT_R_PROTO:
- * This symbol encodes the prototype of endprotoent_r.
- * It is zero if d_endprotoent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endprotoent_r
- * is defined.
+#define Drand01() Perl_drand48() /**/
+#define Rand_seed_t U32 /**/
+#define seedDrand01(x) Perl_drand48_init((Rand_seed_t)x) /**/
+#define RANDBITS 48 /**/
+
+/* SSize_t:
+ * This symbol holds the type used by functions that return
+ * a count of bytes or an error condition. It must be a signed type.
+ * It is usually ssize_t, but may be long or int, etc.
+ * It may be necessary to include <sys/types.h> or <unistd.h>
+ * to get any typedef'ed information.
+ * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
*/
-/*#define HAS_ENDPROTOENT_R / **/
-#define ENDPROTOENT_R_PROTO 0 /**/
+#define SSize_t int /* signed count of bytes */
-/* HAS_ENDPWENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for finalizing sequential access of the passwd database.
+/* EBCDIC:
+ * This symbol, if defined, indicates that this system uses
+ * EBCDIC encoding.
*/
-/*#define HAS_ENDPWENT / **/
+/*#define EBCDIC / **/
-/* HAS_ENDPWENT_R:
- * This symbol, if defined, indicates that the endpwent_r routine
- * is available to endpwent re-entrantly.
+/* ARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user wants to put architecture-dependent public
+ * library files for perl5. It is most often a local directory
+ * such as /usr/local/lib. Programs using this variable must be
+ * prepared to deal with filename expansion. If ARCHLIB is the
+ * same as PRIVLIB, it is not defined, since presumably the
+ * program already searches PRIVLIB.
*/
-/* ENDPWENT_R_PROTO:
- * This symbol encodes the prototype of endpwent_r.
- * It is zero if d_endpwent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r
- * is defined.
+/* ARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of ARCHLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define HAS_ENDPWENT_R / **/
-#define ENDPWENT_R_PROTO 0 /**/
+#define ARCHLIB "c:\\perl\\lib" /**/
+/*#define ARCHLIB_EXP "" / **/
-/* HAS_ENDSERVENT:
- * This symbol, if defined, indicates that the endservent() routine is
- * available to close whatever was being used for service queries.
+/* BIN:
+ * This symbol holds the path of the bin directory where the package will
+ * be installed. Program must be prepared to deal with ~name substitution.
*/
-/*#define HAS_ENDSERVENT / **/
-
-/* HAS_ENDSERVENT_R:
- * This symbol, if defined, indicates that the endservent_r routine
- * is available to endservent re-entrantly.
+/* BIN_EXP:
+ * This symbol is the filename expanded version of the BIN symbol, for
+ * programs that do not want to deal with that at run-time.
*/
-/* ENDSERVENT_R_PROTO:
- * This symbol encodes the prototype of endservent_r.
- * It is zero if d_endservent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endservent_r
- * is defined.
+/* PERL_RELOCATABLE_INC:
+ * This symbol, if defined, indicates that we'd like to relocate entries
+ * in @INC at run time based on the location of the perl binary.
*/
-/*#define HAS_ENDSERVENT_R / **/
-#define ENDSERVENT_R_PROTO 0 /**/
+#define BIN "c:\\perl\\bin" /**/
+#define BIN_EXP "c:\\perl\\bin" /**/
+#define PERL_RELOCATABLE_INC "undef" /**/
-/* HAS_FD_SET:
- * This symbol, when defined, indicates presence of the fd_set typedef
- * in <sys/types.h>
+/* PERL_INC_VERSION_LIST:
+ * This variable specifies the list of subdirectories in over
+ * which perl.c:incpush() and lib/lib.pm will automatically
+ * search when adding directories to @INC, in a format suitable
+ * for a C initialization string. See the inc_version_list entry
+ * in Porting/Glossary for more details.
*/
-#define HAS_FD_SET /**/
+/*#define PERL_INC_VERSION_LIST 0 / **/
-/* FLEXFILENAMES:
- * This symbol, if defined, indicates that the system supports filenames
- * longer than 14 characters.
- */
-#define FLEXFILENAMES /**/
-
-/* Gconvert:
- * This preprocessor macro is defined to convert a floating point
- * number to a string without a trailing decimal point. This
- * emulates the behavior of sprintf("%g"), but is sometimes much more
- * efficient. If gconvert() is not available, but gcvt() drops the
- * trailing decimal point, then gcvt() is used. If all else fails,
- * a macro using sprintf("%g") is used. Arguments for the Gconvert
- * macro are: value, number of digits, whether trailing zeros should
- * be retained, and the output buffer.
- * The usual values are:
- * d_Gconvert='gconvert((x),(n),(t),(b))'
- * d_Gconvert='gcvt((x),(n),(b))'
- * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
- * The last two assume trailing zeros should not be kept.
+/* INSTALL_USR_BIN_PERL:
+ * This symbol, if defined, indicates that Perl is to be installed
+ * also as /usr/bin/perl.
*/
-#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+/*#define INSTALL_USR_BIN_PERL / **/
-/* HAS_GETGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available for sequential access of the group database.
+/* PERL_OTHERLIBDIRS:
+ * This variable contains a colon-separated set of paths for the perl
+ * binary to search for additional library files or modules.
+ * These directories will be tacked to the end of @INC.
+ * Perl will automatically search below each path for version-
+ * and architecture-specific directories. See PERL_INC_VERSION_LIST
+ * for more details.
*/
-/*#define HAS_GETGRENT / **/
+/*#define PERL_OTHERLIBDIRS "" / **/
-/* HAS_GETGRENT_R:
- * This symbol, if defined, indicates that the getgrent_r routine
- * is available to getgrent re-entrantly.
+/* PRIVLIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
*/
-/* GETGRENT_R_PROTO:
- * This symbol encodes the prototype of getgrent_r.
- * It is zero if d_getgrent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r
- * is defined.
+/* PRIVLIB_EXP:
+ * This symbol contains the ~name expanded version of PRIVLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define HAS_GETGRENT_R / **/
-#define GETGRENT_R_PROTO 0 /**/
+#define PRIVLIB "c:\\perl\\lib" /**/
+#define PRIVLIB_EXP (PerlEnv_lib_path(PERL_VERSION_STRING, NULL)) /**/
-/* HAS_GETGRGID_R:
- * This symbol, if defined, indicates that the getgrgid_r routine
- * is available to getgrgid re-entrantly.
+/* SITEARCH:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-dependent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
*/
-/* GETGRGID_R_PROTO:
- * This symbol encodes the prototype of getgrgid_r.
- * It is zero if d_getgrgid_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r
- * is defined.
+/* SITEARCH_EXP:
+ * This symbol contains the ~name expanded version of SITEARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define HAS_GETGRGID_R / **/
-#define GETGRGID_R_PROTO 0 /**/
+#define SITEARCH "c:\\perl\\site\\lib" /**/
+/*#define SITEARCH_EXP "" / **/
-/* HAS_GETGRNAM_R:
- * This symbol, if defined, indicates that the getgrnam_r routine
- * is available to getgrnam re-entrantly.
+/* SITELIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-independent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
*/
-/* GETGRNAM_R_PROTO:
- * This symbol encodes the prototype of getgrnam_r.
- * It is zero if d_getgrnam_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r
- * is defined.
+/* SITELIB_EXP:
+ * This symbol contains the ~name expanded version of SITELIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define HAS_GETGRNAM_R / **/
-#define GETGRNAM_R_PROTO 0 /**/
-
-/* HAS_GETHOSTBYADDR:
- * This symbol, if defined, indicates that the gethostbyaddr() routine is
- * available to look up hosts by their IP addresses.
+/* SITELIB_STEM:
+ * This define is SITELIB_EXP with any trailing version-specific component
+ * removed. The elements in inc_version_list (inc_version_list.U) can
+ * be tacked onto this variable to generate a list of directories to search.
*/
-#define HAS_GETHOSTBYADDR /**/
+#define SITELIB "c:\\perl\\site\\lib" /**/
+#define SITELIB_EXP (PerlEnv_sitelib_path(PERL_VERSION_STRING, NULL)) /**/
+#define SITELIB_STEM "" /**/
-/* HAS_GETHOSTBYNAME:
- * This symbol, if defined, indicates that the gethostbyname() routine is
- * available to look up host names in some data base or other.
+/* PERL_VENDORARCH:
+ * If defined, this symbol contains the name of a private library.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world.
+ * It may have a ~ on the front.
+ * The standard distribution will put nothing in this directory.
+ * Vendors who distribute perl may wish to place their own
+ * architecture-dependent modules and extensions in this directory with
+ * MakeMaker Makefile.PL INSTALLDIRS=vendor
+ * or equivalent. See INSTALL for details.
*/
-#define HAS_GETHOSTBYNAME /**/
-
-/* HAS_GETHOSTENT:
- * This symbol, if defined, indicates that the gethostent() routine is
- * available to look up host names in some data base or another.
+/* PERL_VENDORARCH_EXP:
+ * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/*#define HAS_GETHOSTENT / **/
+/*#define PERL_VENDORARCH "" / **/
+/*#define PERL_VENDORARCH_EXP "" / **/
-/* HAS_GETHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * gethostname() routine to derive the host name. See also HAS_UNAME
- * and PHOSTNAME.
+/* PERL_VENDORLIB_EXP:
+ * This symbol contains the ~name expanded version of VENDORLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
*/
-/* HAS_UNAME:
- * This symbol, if defined, indicates that the C program may use the
- * uname() routine to derive the host name. See also HAS_GETHOSTNAME
- * and PHOSTNAME.
+/* PERL_VENDORLIB_STEM:
+ * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
+ * removed. The elements in inc_version_list (inc_version_list.U) can
+ * be tacked onto this variable to generate a list of directories to search.
*/
-/* PHOSTNAME:
- * This symbol, if defined, indicates the command to feed to the
- * popen() routine to derive the host name. See also HAS_GETHOSTNAME
- * and HAS_UNAME. Note that the command uses a fully qualified path,
- * so that it is safe even if used by a process with super-user
- * privileges.
+/*#define PERL_VENDORLIB_EXP "" / **/
+/*#define PERL_VENDORLIB_STEM "" / **/
+
+/* OSNAME:
+ * This symbol contains the name of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
*/
-/* HAS_PHOSTNAME:
- * This symbol, if defined, indicates that the C program may use the
- * contents of PHOSTNAME as a command to feed to the popen() routine
- * to derive the host name.
+/* OSVERS:
+ * This symbol contains the version of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
*/
-#define HAS_GETHOSTNAME /**/
-#define HAS_UNAME /**/
-/*#define HAS_PHOSTNAME / **/
-#ifdef HAS_PHOSTNAME
-#define PHOSTNAME "" /* How to get the host name */
-#endif
+#define OSNAME "MSWin32" /**/
+#define OSVERS "6.1" /**/
-/* HAS_GETHOSTBYADDR_R:
- * This symbol, if defined, indicates that the gethostbyaddr_r routine
- * is available to gethostbyaddr re-entrantly.
+/* CAT2:
+ * This macro concatenates 2 tokens together.
*/
-/* GETHOSTBYADDR_R_PROTO:
- * This symbol encodes the prototype of gethostbyaddr_r.
- * It is zero if d_gethostbyaddr_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyaddr_r
- * is defined.
+/* STRINGIFY:
+ * This macro surrounds its token with double quotes.
*/
-/*#define HAS_GETHOSTBYADDR_R / **/
-#define GETHOSTBYADDR_R_PROTO 0 /**/
+#if 42 == 1
+#define CAT2(a,b) a/**/b
+#undef STRINGIFY
+#define STRINGIFY(a) "a"
+#endif
+#if 42 == 42
+#define PeRl_CaTiFy(a, b) a ## b
+#define PeRl_StGiFy(a) #a
+#define CAT2(a,b) PeRl_CaTiFy(a,b)
+#define StGiFy(a) PeRl_StGiFy(a)
+#undef STRINGIFY
+#define STRINGIFY(a) PeRl_StGiFy(a)
+#endif
+#if 42 != 1 && 42 != 42
+#include "Bletch: How does this C preprocessor concatenate tokens?"
+#endif
-/* HAS_GETHOSTBYNAME_R:
- * This symbol, if defined, indicates that the gethostbyname_r routine
- * is available to gethostbyname re-entrantly.
+/* CPPSTDIN:
+ * This symbol contains the first part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. Typical value of "cc -E" or "/lib/cpp", but it can also
+ * call a wrapper. See CPPRUN.
*/
-/* GETHOSTBYNAME_R_PROTO:
- * This symbol encodes the prototype of gethostbyname_r.
- * It is zero if d_gethostbyname_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyname_r
- * is defined.
+/* CPPMINUS:
+ * This symbol contains the second part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. This symbol will have the value "-" if CPPSTDIN needs a minus
+ * to specify standard input, otherwise the value is "".
*/
-/*#define HAS_GETHOSTBYNAME_R / **/
-#define GETHOSTBYNAME_R_PROTO 0 /**/
-
-/* HAS_GETHOSTENT_R:
- * This symbol, if defined, indicates that the gethostent_r routine
- * is available to gethostent re-entrantly.
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
*/
-/* GETHOSTENT_R_PROTO:
- * This symbol encodes the prototype of gethostent_r.
- * It is zero if d_gethostent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostent_r
- * is defined.
+/* CPPLAST:
+ * This symbol is intended to be used along with CPPRUN in the same manner
+ * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
*/
-/*#define HAS_GETHOSTENT_R / **/
-#define GETHOSTENT_R_PROTO 0 /**/
+#define CPPSTDIN "gcc -E"
+#define CPPMINUS "-"
+#define CPPRUN "gcc -E"
+#define CPPLAST ""
-/* HAS_GETHOST_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for gethostent(), gethostbyname(), and
- * gethostbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* HAS_ACCESS:
+ * This manifest constant lets the C program know that the access()
+ * system call is available to check for accessibility using real UID/GID.
+ * (always present on UNIX.)
*/
-#define HAS_GETHOST_PROTOS /**/
+#define HAS_ACCESS /**/
-/* HAS_GETLOGIN_R:
- * This symbol, if defined, indicates that the getlogin_r routine
- * is available to getlogin re-entrantly.
- */
-/* GETLOGIN_R_PROTO:
- * This symbol encodes the prototype of getlogin_r.
- * It is zero if d_getlogin_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r
- * is defined.
- */
-/*#define HAS_GETLOGIN_R / **/
-#define GETLOGIN_R_PROTO 0 /**/
-/* HAS_GETNETBYADDR:
- * This symbol, if defined, indicates that the getnetbyaddr() routine is
- * available to look up networks by their IP addresses.
+/* The HASATTRIBUTE_* defines are left undefined here because they vary from
+ * one version of GCC to another. Instead, they are defined on the basis of
+ * the compiler version in <perl.h>.
*/
-/*#define HAS_GETNETBYADDR / **/
-
-/* HAS_GETNETBYNAME:
- * This symbol, if defined, indicates that the getnetbyname() routine is
- * available to look up networks by their names.
+/* HASATTRIBUTE_FORMAT:
+ * Can we handle GCC attribute for checking printf-style formats
*/
-/*#define HAS_GETNETBYNAME / **/
-
-/* HAS_GETNETENT:
- * This symbol, if defined, indicates that the getnetent() routine is
- * available to look up network names in some data base or another.
+/* PRINTF_FORMAT_NULL_OK:
+ * Allows __printf__ format to be null when checking printf-style
*/
-/*#define HAS_GETNETENT / **/
-
-/* HAS_GETNETBYADDR_R:
- * This symbol, if defined, indicates that the getnetbyaddr_r routine
- * is available to getnetbyaddr re-entrantly.
+/* HASATTRIBUTE_MALLOC:
+ * Can we handle GCC attribute for malloc-style functions.
*/
-/* GETNETBYADDR_R_PROTO:
- * This symbol encodes the prototype of getnetbyaddr_r.
- * It is zero if d_getnetbyaddr_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyaddr_r
- * is defined.
+/* HASATTRIBUTE_NONNULL:
+ * Can we handle GCC attribute for nonnull function parms.
*/
-/*#define HAS_GETNETBYADDR_R / **/
-#define GETNETBYADDR_R_PROTO 0 /**/
-
-/* HAS_GETNETBYNAME_R:
- * This symbol, if defined, indicates that the getnetbyname_r routine
- * is available to getnetbyname re-entrantly.
+/* HASATTRIBUTE_NORETURN:
+ * Can we handle GCC attribute for functions that do not return
*/
-/* GETNETBYNAME_R_PROTO:
- * This symbol encodes the prototype of getnetbyname_r.
- * It is zero if d_getnetbyname_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyname_r
- * is defined.
+/* HASATTRIBUTE_PURE:
+ * Can we handle GCC attribute for pure functions
*/
-/*#define HAS_GETNETBYNAME_R / **/
-#define GETNETBYNAME_R_PROTO 0 /**/
-
-/* HAS_GETNETENT_R:
- * This symbol, if defined, indicates that the getnetent_r routine
- * is available to getnetent re-entrantly.
+/* HASATTRIBUTE_UNUSED:
+ * Can we handle GCC attribute for unused variables and arguments
*/
-/* GETNETENT_R_PROTO:
- * This symbol encodes the prototype of getnetent_r.
- * It is zero if d_getnetent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetent_r
- * is defined.
+/* HASATTRIBUTE_DEPRECATED:
+ * Can we handle GCC attribute for marking deprecated APIs
*/
-/*#define HAS_GETNETENT_R / **/
-#define GETNETENT_R_PROTO 0 /**/
-
-/* HAS_GETNET_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getnetent(), getnetbyname(), and
- * getnetbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* HASATTRIBUTE_WARN_UNUSED_RESULT:
+ * Can we handle GCC attribute for warning on unused results
*/
-/*#define HAS_GETNET_PROTOS / **/
+/*#define HASATTRIBUTE_DEPRECATED / **/
+/*#define HASATTRIBUTE_FORMAT / **/
+/*#define PRINTF_FORMAT_NULL_OK / **/
+/*#define HASATTRIBUTE_NORETURN / **/
+/*#define HASATTRIBUTE_MALLOC / **/
+/*#define HASATTRIBUTE_NONNULL / **/
+/*#define HASATTRIBUTE_PURE / **/
+/*#define HASATTRIBUTE_UNUSED / **/
+/*#define HASATTRIBUTE_WARN_UNUSED_RESULT / **/
-/* HAS_GETPAGESIZE:
- * This symbol, if defined, indicates that the getpagesize system call
- * is available to get system page size, which is the granularity of
- * many memory management calls.
+/* HAS_BACKTRACE:
+ * This symbol, if defined, indicates that the backtrace() routine is
+ * available to get a stack trace. The <execinfo.h> header must be
+ * included to use this routine.
*/
-/*#define HAS_GETPAGESIZE / **/
+/*#define HAS_BACKTRACE / **/
-/* HAS_GETPROTOENT:
- * This symbol, if defined, indicates that the getprotoent() routine is
- * available to look up protocols in some data base or another.
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
*/
-/*#define HAS_GETPROTOENT / **/
-
-/* HAS_GETPGRP:
- * This symbol, if defined, indicates that the getpgrp routine is
- * available to get the current process group.
+/* CSH:
+ * This symbol, if defined, contains the full pathname of csh.
*/
-/* USE_BSD_GETPGRP:
- * This symbol, if defined, indicates that getpgrp needs one
- * arguments whereas USG one needs none.
+/*#define HAS_CSH / **/
+#ifdef HAS_CSH
+#define CSH "" /**/
+#endif
+
+/* HAS_DLADDR:
+ * This symbol, if defined, indicates that the dladdr() routine is
+ * available to query dynamic linker information for an address.
+ * The <dlfcn.h> header must be included to use this routine.
*/
-/*#define HAS_GETPGRP / **/
-/*#define USE_BSD_GETPGRP / **/
+/*#define HAS_DLADDR / **/
-/* HAS_GETPROTOBYNAME:
- * This symbol, if defined, indicates that the getprotobyname()
- * routine is available to look up protocols by their name.
+/* SETUID_SCRIPTS_ARE_SECURE_NOW:
+ * This symbol, if defined, indicates that the bug that prevents
+ * setuid scripts from being secure is not present in this kernel.
*/
-/* HAS_GETPROTOBYNUMBER:
- * This symbol, if defined, indicates that the getprotobynumber()
- * routine is available to look up protocols by their number.
+/* DOSUID:
+ * This symbol, if defined, indicates that the C program should
+ * check the script that it is executing for setuid/setgid bits, and
+ * attempt to emulate setuid/setgid on systems that have disabled
+ * setuid #! scripts because the kernel can't do it securely.
+ * It is up to the package designer to make sure that this emulation
+ * is done securely. Among other things, it should do an fstat on
+ * the script it just opened to make sure it really is a setuid/setgid
+ * script, it should make sure the arguments passed correspond exactly
+ * to the argument on the #! line, and it should not trust any
+ * subprocesses to which it must pass the filename rather than the
+ * file descriptor of the script to be executed.
*/
-#define HAS_GETPROTOBYNAME /**/
-#define HAS_GETPROTOBYNUMBER /**/
+/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
+/*#define DOSUID / **/
-/* HAS_GETPROTOBYNAME_R:
- * This symbol, if defined, indicates that the getprotobyname_r routine
- * is available to getprotobyname re-entrantly.
+/* HAS_ENDGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the group database.
*/
-/* GETPROTOBYNAME_R_PROTO:
- * This symbol encodes the prototype of getprotobyname_r.
- * It is zero if d_getprotobyname_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobyname_r
- * is defined.
+/*#define HAS_ENDGRENT / **/
+
+/* HAS_ENDHOSTENT:
+ * This symbol, if defined, indicates that the endhostent() routine is
+ * available to close whatever was being used for host queries.
*/
-/*#define HAS_GETPROTOBYNAME_R / **/
-#define GETPROTOBYNAME_R_PROTO 0 /**/
+/*#define HAS_ENDHOSTENT / **/
-/* HAS_GETPROTOBYNUMBER_R:
- * This symbol, if defined, indicates that the getprotobynumber_r routine
- * is available to getprotobynumber re-entrantly.
+/* HAS_ENDNETENT:
+ * This symbol, if defined, indicates that the endnetent() routine is
+ * available to close whatever was being used for network queries.
*/
-/* GETPROTOBYNUMBER_R_PROTO:
- * This symbol encodes the prototype of getprotobynumber_r.
- * It is zero if d_getprotobynumber_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobynumber_r
- * is defined.
+/*#define HAS_ENDNETENT / **/
+
+/* HAS_ENDPROTOENT:
+ * This symbol, if defined, indicates that the endprotoent() routine is
+ * available to close whatever was being used for protocol queries.
*/
-/*#define HAS_GETPROTOBYNUMBER_R / **/
-#define GETPROTOBYNUMBER_R_PROTO 0 /**/
+/*#define HAS_ENDPROTOENT / **/
-/* HAS_GETPROTOENT_R:
- * This symbol, if defined, indicates that the getprotoent_r routine
- * is available to getprotoent re-entrantly.
+/* HAS_ENDPWENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the passwd database.
*/
-/* GETPROTOENT_R_PROTO:
- * This symbol encodes the prototype of getprotoent_r.
- * It is zero if d_getprotoent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotoent_r
- * is defined.
+/*#define HAS_ENDPWENT / **/
+
+/* HAS_ENDSERVENT:
+ * This symbol, if defined, indicates that the endservent() routine is
+ * available to close whatever was being used for service queries.
*/
-/*#define HAS_GETPROTOENT_R / **/
-#define GETPROTOENT_R_PROTO 0 /**/
+/*#define HAS_ENDSERVENT / **/
-/* HAS_GETPROTO_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getprotoent(), getprotobyname(), and
- * getprotobyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* FLEXFILENAMES:
+ * This symbol, if defined, indicates that the system supports filenames
+ * longer than 14 characters.
*/
-#define HAS_GETPROTO_PROTOS /**/
+#define FLEXFILENAMES /**/
-/* HAS_GETPWENT:
- * This symbol, if defined, indicates that the getpwent routine is
- * available for sequential access of the passwd database.
- * If this is not available, the older getpw() function may be available.
+/* HAS_GETGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for sequential access of the group database.
*/
-/*#define HAS_GETPWENT / **/
+/*#define HAS_GETGRENT / **/
-/* HAS_GETPWENT_R:
- * This symbol, if defined, indicates that the getpwent_r routine
- * is available to getpwent re-entrantly.
+/* HAS_GETHOSTBYADDR:
+ * This symbol, if defined, indicates that the gethostbyaddr() routine is
+ * available to look up hosts by their IP addresses.
*/
-/* GETPWENT_R_PROTO:
- * This symbol encodes the prototype of getpwent_r.
- * It is zero if d_getpwent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r
- * is defined.
- */
-/*#define HAS_GETPWENT_R / **/
-#define GETPWENT_R_PROTO 0 /**/
+#define HAS_GETHOSTBYADDR /**/
-/* HAS_GETPWNAM_R:
- * This symbol, if defined, indicates that the getpwnam_r routine
- * is available to getpwnam re-entrantly.
+/* HAS_GETHOSTBYNAME:
+ * This symbol, if defined, indicates that the gethostbyname() routine is
+ * available to look up host names in some data base or other.
*/
-/* GETPWNAM_R_PROTO:
- * This symbol encodes the prototype of getpwnam_r.
- * It is zero if d_getpwnam_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r
- * is defined.
+#define HAS_GETHOSTBYNAME /**/
+
+/* HAS_GETHOSTENT:
+ * This symbol, if defined, indicates that the gethostent() routine is
+ * available to look up host names in some data base or another.
*/
-/*#define HAS_GETPWNAM_R / **/
-#define GETPWNAM_R_PROTO 0 /**/
+/*#define HAS_GETHOSTENT / **/
-/* HAS_GETPWUID_R:
- * This symbol, if defined, indicates that the getpwuid_r routine
- * is available to getpwuid re-entrantly.
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
*/
-/* GETPWUID_R_PROTO:
- * This symbol encodes the prototype of getpwuid_r.
- * It is zero if d_getpwuid_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r
- * is defined.
+/* HAS_UNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * uname() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and PHOSTNAME.
*/
-/*#define HAS_GETPWUID_R / **/
-#define GETPWUID_R_PROTO 0 /**/
-
-/* HAS_GETSERVENT:
- * This symbol, if defined, indicates that the getservent() routine is
- * available to look up network services in some data base or another.
+/* PHOSTNAME:
+ * This symbol, if defined, indicates the command to feed to the
+ * popen() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and HAS_UNAME. Note that the command uses a fully qualified path,
+ * so that it is safe even if used by a process with super-user
+ * privileges.
*/
-/*#define HAS_GETSERVENT / **/
+/* HAS_PHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * contents of PHOSTNAME as a command to feed to the popen() routine
+ * to derive the host name.
+ */
+#define HAS_GETHOSTNAME /**/
+#define HAS_UNAME /**/
+/*#define HAS_PHOSTNAME / **/
+#ifdef HAS_PHOSTNAME
+#define PHOSTNAME "" /* How to get the host name */
+#endif
-/* HAS_GETSERVBYNAME_R:
- * This symbol, if defined, indicates that the getservbyname_r routine
- * is available to getservbyname re-entrantly.
+/* HAS_GETNETBYADDR:
+ * This symbol, if defined, indicates that the getnetbyaddr() routine is
+ * available to look up networks by their IP addresses.
*/
-/* GETSERVBYNAME_R_PROTO:
- * This symbol encodes the prototype of getservbyname_r.
- * It is zero if d_getservbyname_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyname_r
- * is defined.
+/*#define HAS_GETNETBYADDR / **/
+
+/* HAS_GETNETBYNAME:
+ * This symbol, if defined, indicates that the getnetbyname() routine is
+ * available to look up networks by their names.
*/
-/*#define HAS_GETSERVBYNAME_R / **/
-#define GETSERVBYNAME_R_PROTO 0 /**/
+/*#define HAS_GETNETBYNAME / **/
-/* HAS_GETSERVBYPORT_R:
- * This symbol, if defined, indicates that the getservbyport_r routine
- * is available to getservbyport re-entrantly.
+/* HAS_GETNETENT:
+ * This symbol, if defined, indicates that the getnetent() routine is
+ * available to look up network names in some data base or another.
*/
-/* GETSERVBYPORT_R_PROTO:
- * This symbol encodes the prototype of getservbyport_r.
- * It is zero if d_getservbyport_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyport_r
- * is defined.
+/*#define HAS_GETNETENT / **/
+
+/* HAS_GETPROTOENT:
+ * This symbol, if defined, indicates that the getprotoent() routine is
+ * available to look up protocols in some data base or another.
*/
-/*#define HAS_GETSERVBYPORT_R / **/
-#define GETSERVBYPORT_R_PROTO 0 /**/
+/*#define HAS_GETPROTOENT / **/
-/* HAS_GETSERVENT_R:
- * This symbol, if defined, indicates that the getservent_r routine
- * is available to getservent re-entrantly.
+/* HAS_GETPGRP:
+ * This symbol, if defined, indicates that the getpgrp routine is
+ * available to get the current process group.
*/
-/* GETSERVENT_R_PROTO:
- * This symbol encodes the prototype of getservent_r.
- * It is zero if d_getservent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r
- * is defined.
+/* USE_BSD_GETPGRP:
+ * This symbol, if defined, indicates that getpgrp needs one
+ * arguments whereas USG one needs none.
*/
-/*#define HAS_GETSERVENT_R / **/
-#define GETSERVENT_R_PROTO 0 /**/
+/*#define HAS_GETPGRP / **/
+/*#define USE_BSD_GETPGRP / **/
-/* HAS_GETSERV_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getservent(), getservbyname(), and
- * getservbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* HAS_GETPROTOBYNAME:
+ * This symbol, if defined, indicates that the getprotobyname()
+ * routine is available to look up protocols by their name.
*/
-#define HAS_GETSERV_PROTOS /**/
+/* HAS_GETPROTOBYNUMBER:
+ * This symbol, if defined, indicates that the getprotobynumber()
+ * routine is available to look up protocols by their number.
+ */
+#define HAS_GETPROTOBYNAME /**/
+#define HAS_GETPROTOBYNUMBER /**/
-/* HAS_GETSPNAM_R:
- * This symbol, if defined, indicates that the getspnam_r routine
- * is available to getspnam re-entrantly.
+/* HAS_GETPWENT:
+ * This symbol, if defined, indicates that the getpwent routine is
+ * available for sequential access of the passwd database.
+ * If this is not available, the older getpw() function may be available.
*/
-/* GETSPNAM_R_PROTO:
- * This symbol encodes the prototype of getspnam_r.
- * It is zero if d_getspnam_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r
- * is defined.
+/*#define HAS_GETPWENT / **/
+
+/* HAS_GETSERVENT:
+ * This symbol, if defined, indicates that the getservent() routine is
+ * available to look up network services in some data base or another.
*/
-/*#define HAS_GETSPNAM_R / **/
-#define GETSPNAM_R_PROTO 0 /**/
+/*#define HAS_GETSERVENT / **/
/* HAS_GETSERVBYNAME:
* This symbol, if defined, indicates that the getservbyname()
#define HAS_GETSERVBYNAME /**/
#define HAS_GETSERVBYPORT /**/
-/* HAS_GMTIME_R:
- * This symbol, if defined, indicates that the gmtime_r routine
- * is available to gmtime re-entrantly.
- */
-/* GMTIME_R_PROTO:
- * This symbol encodes the prototype of gmtime_r.
- * It is zero if d_gmtime_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r
- * is defined.
- */
-/*#define HAS_GMTIME_R / **/
-#define GMTIME_R_PROTO 0 /**/
-
-/* HAS_GNULIBC:
- * This symbol, if defined, indicates to the C program that
- * the GNU C library is being used. A better check is to use
- * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
- */
-/*#define HAS_GNULIBC / **/
-#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
-# define _GNU_SOURCE
-#endif
-
/* HAS_HTONL:
* This symbol, if defined, indicates that the htonl() routine (and
* friends htons() ntohl() ntohs()) are available to do network
#define HAS_NTOHL /**/
#define HAS_NTOHS /**/
-/* HAS_ISASCII:
- * This manifest constant lets the C program know that isascii
- * is available.
- */
-#define HAS_ISASCII /**/
-
-/* HAS_LCHOWN:
- * This symbol, if defined, indicates that the lchown routine is
- * available to operate on a symbolic link (instead of following the
- * link).
- */
-/*#define HAS_LCHOWN / **/
-
-/* HAS_LOCALTIME_R:
- * This symbol, if defined, indicates that the localtime_r routine
- * is available to localtime re-entrantly.
- */
-/* LOCALTIME_R_NEEDS_TZSET:
- * Many libc's localtime_r implementations do not call tzset,
- * making them differ from localtime(), and making timezone
- * changes using \undef{TZ} without explicitly calling tzset
- * impossible. This symbol makes us call tzset before localtime_r
- */
-/*#define LOCALTIME_R_NEEDS_TZSET / **/
-#ifdef LOCALTIME_R_NEEDS_TZSET
-#define L_R_TZSET tzset(),
-#else
-#define L_R_TZSET
-#endif
-
-/* LOCALTIME_R_PROTO:
- * This symbol encodes the prototype of localtime_r.
- * It is zero if d_localtime_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r
- * is defined.
- */
-/*#define HAS_LOCALTIME_R / **/
-#define LOCALTIME_R_PROTO 0 /**/
-
/* HAS_LONG_DOUBLE:
* This symbol will be defined if the C compiler supports long
* doubles.
/* LONG_DOUBLESIZE:
* This symbol contains the size of a long double, so that the
* C preprocessor can make decisions based on it. It is only
- * defined if the system supports long doubles.
+ * defined if the system supports long doubles. Note that this
+ * is sizeof(long double), which may include unused bytes.
*/
/* HAS_LDEXPL:
* This symbol, if defined, indicates that the ldexpl routine is
* LONG_DOUBLE_IS_IEEE_754_128_BIT_BIG_ENDIAN
* LONG_DOUBLE_IS_X86_80_BIT_LITTLE_ENDIAN
* LONG_DOUBLE_IS_X86_80_BIT_BIG_ENDIAN
- * LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LITTLE_ENDIAN
- * LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BIG_ENDIAN
+ * LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_LE
+ * LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_BE
+ * LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_BE
+ * LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_LE
+ * LONG_DOUBLE_IS_VAX_H_FLOAT
* LONG_DOUBLE_IS_UNKNOWN_FORMAT
* It is only defined if the system supports long doubles.
*/
-/*#define HAS_LDEXPL / **/
+/* LONG_DOUBLE_STYLE_IEEE:
+ * This symbol, if defined, indicates that the long double
+ * is any of the IEEE 754 style long doubles:
+ * LONG_DOUBLE_STYLE_IEEE_STD, LONG_DOUBLE_STYLE_IEEE_EXTENDED,
+ * LONG_DOUBLE_STYLE_IEEE_DOUBLEDOUBLE.
+ */
+/* LONG_DOUBLE_STYLE_IEEE_DOUBLEDOUBLE:
+ * This symbol, if defined, indicates that the long double is
+ * the 128-bit double-double.
+ */
+/* LONG_DOUBLE_STYLE_IEEE_EXTENDED:
+ * This symbol, if defined, indicates that the long double is
+ * the 80-bit IEEE 754. Note that despite the 'extended' this
+ * is less than the 'std', since this is an extension of
+ * the double precision.
+ */
+/* LONG_DOUBLE_STYLE_IEEE_STD:
+ * This symbol, if defined, indicates that the long double is
+ * the 128-bit IEEE 754.
+ */
+/* LONG_DOUBLE_STYLE_VAX:
+ * This symbol, if defined, indicates that the long double is
+ * the 128-bit VAX format H.
+ */
+#define HAS_LDEXPL /**/
#define HAS_LONG_DOUBLE /**/
#ifdef HAS_LONG_DOUBLE
#define LONG_DOUBLESIZE 12 /**/
#define LONG_DOUBLE_IS_IEEE_754_128_BIT_BIG_ENDIAN 2
#define LONG_DOUBLE_IS_X86_80_BIT_LITTLE_ENDIAN 3
#define LONG_DOUBLE_IS_X86_80_BIT_BIG_ENDIAN 4
-#define LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LITTLE_ENDIAN 5
-#define LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BIG_ENDIAN 6
+#define LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_LE 5
+#define LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_BE 6
+#define LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_BE 7
+#define LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_LE 8
+#define LONG_DOUBLE_IS_VAX_H_FLOAT 9
#define LONG_DOUBLE_IS_UNKNOWN_FORMAT -1
+#define LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LITTLE_ENDIAN LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_LE_LE /* back-compat */
+#define LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BIG_ENDIAN LONG_DOUBLE_IS_DOUBLEDOUBLE_128_BIT_BE_BE /* back-compat */
+#undef LONG_DOUBLE_STYLE_IEEE
+#undef LONG_DOUBLE_STYLE_IEEE_DOUBLEDOUBLE
+#define LONG_DOUBLE_STYLE_IEEE_EXTENDED
+#undef LONG_DOUBLE_STYLE_IEEE_STD
+#undef LONG_DOUBLE_STYLE_VAX
#endif
/* HAS_LONG_LONG:
#define LONGLONGSIZE 8 /**/
#endif
-/* HAS_LSEEK_PROTO:
- * This symbol, if defined, indicates that the system provides
- * a prototype for the lseek() function. Otherwise, it is up
- * to the program to supply one. A good guess is
- * extern off_t lseek(int, off_t, int);
- */
-#define HAS_LSEEK_PROTO /**/
-
-/* HAS_MEMCHR:
- * This symbol, if defined, indicates that the memchr routine is available
- * to locate characters within a C string.
- */
-#define HAS_MEMCHR /**/
-
/* HAS_MKSTEMP:
* This symbol, if defined, indicates that the mkstemp routine is
* available to exclusively create and open a uniquely named
*/
/*#define HAS_MSG / **/
-/* HAS_OPEN3:
- * This manifest constant lets the C program know that the three
- * argument form of open(2) is available.
+/* HAS_SEM:
+ * This symbol, if defined, indicates that the entire sem*(2) library is
+ * supported.
*/
-/*#define HAS_OPEN3 / **/
+/*#define HAS_SEM / **/
-/* OLD_PTHREAD_CREATE_JOINABLE:
- * This symbol, if defined, indicates how to create pthread
- * in joinable (aka undetached) state. NOTE: not defined
- * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
- * (the new version of the constant).
- * If defined, known values are PTHREAD_CREATE_UNDETACHED
- * and __UNDETACHED.
+/* HAS_SETGRENT:
+ * This symbol, if defined, indicates that the setgrent routine is
+ * available for initializing sequential access of the group database.
*/
-/*#define OLD_PTHREAD_CREATE_JOINABLE / **/
-
-/* HAS_PTHREAD_ATFORK:
- * This symbol, if defined, indicates that the pthread_atfork routine
- * is available to setup fork handlers.
- */
-/*#define HAS_PTHREAD_ATFORK / **/
-
-/* HAS_PTHREAD_YIELD:
- * This symbol, if defined, indicates that the pthread_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
- */
-/* SCHED_YIELD:
- * This symbol defines the way to yield the execution of
- * the current thread. Known ways are sched_yield,
- * pthread_yield, and pthread_yield with NULL.
- */
-/* HAS_SCHED_YIELD:
- * This symbol, if defined, indicates that the sched_yield
- * routine is available to yield the execution of the current
- * thread. sched_yield is preferable to pthread_yield.
- */
-/*#define HAS_PTHREAD_YIELD / **/
-#define SCHED_YIELD /**/
-/*#define HAS_SCHED_YIELD / **/
-
-/* HAS_RANDOM_R:
- * This symbol, if defined, indicates that the random_r routine
- * is available to random re-entrantly.
- */
-/* RANDOM_R_PROTO:
- * This symbol encodes the prototype of random_r.
- * It is zero if d_random_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r
- * is defined.
- */
-/*#define HAS_RANDOM_R / **/
-#define RANDOM_R_PROTO 0 /**/
-
-/* HAS_READDIR64_R:
- * This symbol, if defined, indicates that the readdir64_r routine
- * is available to readdir64 re-entrantly.
- */
-/* READDIR64_R_PROTO:
- * This symbol encodes the prototype of readdir64_r.
- * It is zero if d_readdir64_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir64_r
- * is defined.
- */
-/*#define HAS_READDIR64_R / **/
-#define READDIR64_R_PROTO 0 /**/
-
-/* HAS_READDIR_R:
- * This symbol, if defined, indicates that the readdir_r routine
- * is available to readdir re-entrantly.
- */
-/* READDIR_R_PROTO:
- * This symbol encodes the prototype of readdir_r.
- * It is zero if d_readdir_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r
- * is defined.
- */
-/*#define HAS_READDIR_R / **/
-#define READDIR_R_PROTO 0 /**/
-
-/* HAS_SAFE_BCOPY:
- * This symbol, if defined, indicates that the bcopy routine is available
- * to copy potentially overlapping memory blocks. Normally, you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
- */
-/*#define HAS_SAFE_BCOPY / **/
-
-/* HAS_SAFE_MEMCPY:
- * This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. If you need to
- * copy overlapping memory blocks, you should check HAS_MEMMOVE and
- * use memmove() instead, if available.
- */
-/*#define HAS_SAFE_MEMCPY / **/
-
-/* HAS_SANE_MEMCMP:
- * This symbol, if defined, indicates that the memcmp routine is available
- * and can be used to compare relative magnitudes of chars with their high
- * bits set. If it is not defined, roll your own version.
- */
-#define HAS_SANE_MEMCMP /**/
-
-/* HAS_SEM:
- * This symbol, if defined, indicates that the entire sem*(2) library is
- * supported.
- */
-/*#define HAS_SEM / **/
-
-/* HAS_SETGRENT:
- * This symbol, if defined, indicates that the setgrent routine is
- * available for initializing sequential access of the group database.
- */
-/*#define HAS_SETGRENT / **/
-
-/* HAS_SETGRENT_R:
- * This symbol, if defined, indicates that the setgrent_r routine
- * is available to setgrent re-entrantly.
- */
-/* SETGRENT_R_PROTO:
- * This symbol encodes the prototype of setgrent_r.
- * It is zero if d_setgrent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r
- * is defined.
- */
-/*#define HAS_SETGRENT_R / **/
-#define SETGRENT_R_PROTO 0 /**/
+/*#define HAS_SETGRENT / **/
/* HAS_SETHOSTENT:
* This symbol, if defined, indicates that the sethostent() routine is
*/
/*#define HAS_SETHOSTENT / **/
-/* HAS_SETHOSTENT_R:
- * This symbol, if defined, indicates that the sethostent_r routine
- * is available to sethostent re-entrantly.
- */
-/* SETHOSTENT_R_PROTO:
- * This symbol encodes the prototype of sethostent_r.
- * It is zero if d_sethostent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_sethostent_r
- * is defined.
- */
-/*#define HAS_SETHOSTENT_R / **/
-#define SETHOSTENT_R_PROTO 0 /**/
-
-/* HAS_SETLOCALE_R:
- * This symbol, if defined, indicates that the setlocale_r routine
- * is available to setlocale re-entrantly.
- */
-/* SETLOCALE_R_PROTO:
- * This symbol encodes the prototype of setlocale_r.
- * It is zero if d_setlocale_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setlocale_r
- * is defined.
- */
-/*#define HAS_SETLOCALE_R / **/
-#define SETLOCALE_R_PROTO 0 /**/
-
/* HAS_SETNETENT:
* This symbol, if defined, indicates that the setnetent() routine is
* available.
*/
/*#define HAS_SETNETENT / **/
-/* HAS_SETNETENT_R:
- * This symbol, if defined, indicates that the setnetent_r routine
- * is available to setnetent re-entrantly.
- */
-/* SETNETENT_R_PROTO:
- * This symbol encodes the prototype of setnetent_r.
- * It is zero if d_setnetent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setnetent_r
- * is defined.
- */
-/*#define HAS_SETNETENT_R / **/
-#define SETNETENT_R_PROTO 0 /**/
-
/* HAS_SETPROTOENT:
* This symbol, if defined, indicates that the setprotoent() routine is
* available.
/*#define HAS_SETPGRP / **/
/*#define USE_BSD_SETPGRP / **/
-/* HAS_SETPROTOENT_R:
- * This symbol, if defined, indicates that the setprotoent_r routine
- * is available to setprotoent re-entrantly.
- */
-/* SETPROTOENT_R_PROTO:
- * This symbol encodes the prototype of setprotoent_r.
- * It is zero if d_setprotoent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setprotoent_r
- * is defined.
- */
-/*#define HAS_SETPROTOENT_R / **/
-#define SETPROTOENT_R_PROTO 0 /**/
-
/* HAS_SETPWENT:
* This symbol, if defined, indicates that the setpwent routine is
* available for initializing sequential access of the passwd database.
*/
/*#define HAS_SETPWENT / **/
-/* HAS_SETPWENT_R:
- * This symbol, if defined, indicates that the setpwent_r routine
- * is available to setpwent re-entrantly.
- */
-/* SETPWENT_R_PROTO:
- * This symbol encodes the prototype of setpwent_r.
- * It is zero if d_setpwent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r
- * is defined.
- */
-/*#define HAS_SETPWENT_R / **/
-#define SETPWENT_R_PROTO 0 /**/
-
/* HAS_SETSERVENT:
* This symbol, if defined, indicates that the setservent() routine is
* available.
*/
/*#define HAS_SETSERVENT / **/
-/* HAS_SETSERVENT_R:
- * This symbol, if defined, indicates that the setservent_r routine
- * is available to setservent re-entrantly.
- */
-/* SETSERVENT_R_PROTO:
- * This symbol encodes the prototype of setservent_r.
- * It is zero if d_setservent_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setservent_r
- * is defined.
- */
-/*#define HAS_SETSERVENT_R / **/
-#define SETSERVENT_R_PROTO 0 /**/
-
/* HAS_SETVBUF:
* This symbol, if defined, indicates that the setvbuf routine is
* available to change buffering on an open stdio stream.
#define Shmat_t void * /**/
/*#define HAS_SHMAT_PROTOTYPE / **/
-/* HAS_SIGACTION:
- * This symbol, if defined, indicates that Vr4's sigaction() routine
- * is available.
- */
-/*#define HAS_SIGACTION / **/
-
-/* HAS_SIGSETJMP:
- * This variable indicates to the C program that the sigsetjmp()
- * routine is available to save the calling process's registers
- * and stack environment for later use by siglongjmp(), and
- * to optionally save the process's signal mask. See
- * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
- */
-/* Sigjmp_buf:
- * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
- */
-/* Sigsetjmp:
- * This macro is used in the same way as sigsetjmp(), but will invoke
- * traditional setjmp() if sigsetjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/* Siglongjmp:
- * This macro is used in the same way as siglongjmp(), but will invoke
- * traditional longjmp() if siglongjmp isn't available.
- * See HAS_SIGSETJMP.
- */
-/*#define HAS_SIGSETJMP / **/
-#ifdef HAS_SIGSETJMP
-#define Sigjmp_buf sigjmp_buf
-#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
-#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
-#else
-#define Sigjmp_buf jmp_buf
-#define Sigsetjmp(buf,save_mask) setjmp((buf))
-#define Siglongjmp(buf,retval) longjmp((buf),(retval))
-#endif
-
/* HAS_SOCKET:
* This symbol, if defined, indicates that the BSD socket interface is
* supported.
* This symbol, if defined, indicates that the BSD socketpair() call is
* supported.
*/
-/* HAS_MSG_CTRUNC:
- * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_DONTROUTE:
- * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_OOB:
- * This symbol, if defined, indicates that the MSG_OOB is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_PEEK:
- * This symbol, if defined, indicates that the MSG_PEEK is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_MSG_PROXY:
- * This symbol, if defined, indicates that the MSG_PROXY is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
-/* HAS_SCM_RIGHTS:
- * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
- * Checking just with #ifdef might not be enough because this symbol
- * has been known to be an enum.
- */
/* HAS_SOCKADDR_SA_LEN:
* This symbol, if defined, indicates that the struct sockaddr
* structure has a member called sa_len, indicating the length of
#define HAS_SOCKET /**/
/*#define HAS_SOCKETPAIR / **/
/*#define HAS_SOCKADDR_SA_LEN / **/
-/*#define HAS_MSG_CTRUNC / **/
-/*#define HAS_MSG_DONTROUTE / **/
-/*#define HAS_MSG_OOB / **/
-/*#define HAS_MSG_PEEK / **/
-/*#define HAS_MSG_PROXY / **/
-/*#define HAS_SCM_RIGHTS / **/
/*#define HAS_SOCKADDR_IN6 / **/
#define HAS_SIN6_SCOPE_ID /**/
/*#define HAS_IP_MREQ / **/
/*#define HAS_IPV6_MREQ / **/
/*#define HAS_IPV6_MREQ_SOURCE / **/
-/* HAS_SRAND48_R:
- * This symbol, if defined, indicates that the srand48_r routine
- * is available to srand48 re-entrantly.
- */
-/* SRAND48_R_PROTO:
- * This symbol encodes the prototype of srand48_r.
- * It is zero if d_srand48_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srand48_r
- * is defined.
- */
-/*#define HAS_SRAND48_R / **/
-#define SRAND48_R_PROTO 0 /**/
-
-/* HAS_SRANDOM_R:
- * This symbol, if defined, indicates that the srandom_r routine
- * is available to srandom re-entrantly.
- */
-/* SRANDOM_R_PROTO:
- * This symbol encodes the prototype of srandom_r.
- * It is zero if d_srandom_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srandom_r
- * is defined.
- */
-/*#define HAS_SRANDOM_R / **/
-#define SRANDOM_R_PROTO 0 /**/
-
/* USE_STAT_BLOCKS:
* This symbol is defined if this system has a stat structure declaring
* st_blksize and st_blocks.
/*#define USE_STAT_BLOCKS / **/
#endif
-/* HAS_STATIC_INLINE:
- * This symbol, if defined, indicates that the C compiler supports
- * C99-style static inline. That is, the function can't be called
- * from another translation unit.
+/* HAS_SYS_ERRLIST:
+ * This symbol, if defined, indicates that the sys_errlist array is
+ * available to translate error numbers to strings. The extern int
+ * sys_nerr gives the size of that table.
*/
-/* PERL_STATIC_INLINE:
- * This symbol gives the best-guess incantation to use for static
- * inline functions. If HAS_STATIC_INLINE is defined, this will
- * give C99-style inline. If HAS_STATIC_INLINE is not defined,
- * this will give a plain 'static'. It will always be defined
- * to something that gives static linkage.
- * Possibilities include
- * static inline (c99)
- * static __inline__ (gcc -ansi)
- * static __inline (MSVC)
- * static _inline (older MSVC)
- * static (c89 compilers)
- */
-#define HAS_STATIC_INLINE /**/
-#define PERL_STATIC_INLINE static __inline__ /**/
-
-/* USE_STDIO_PTR:
- * This symbol is defined if the _ptr and _cnt fields (or similar)
- * of the stdio FILE structure can be used to access the stdio buffer
- * for a file handle. If this is defined, then the FILE_ptr(fp)
- * and FILE_cnt(fp) macros will also be defined and should be used
- * to access these fields.
- */
-/* FILE_ptr:
- * This macro is used to access the _ptr field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_PTR_LVALUE:
- * This symbol is defined if the FILE_ptr macro can be used as an
- * lvalue.
- */
-/* FILE_cnt:
- * This macro is used to access the _cnt field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_PTR is defined.
- */
-/* STDIO_CNT_LVALUE:
- * This symbol is defined if the FILE_cnt macro can be used as an
- * lvalue.
- */
-/* STDIO_PTR_LVAL_SETS_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n has the side effect of decreasing the
- * value of File_cnt(fp) by n.
- */
-/* STDIO_PTR_LVAL_NOCHANGE_CNT:
- * This symbol is defined if using the FILE_ptr macro as an lvalue
- * to increase the pointer by n leaves File_cnt(fp) unchanged.
- */
-#define USE_STDIO_PTR /**/
-#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) ((fp)->_ptr)
-#define STDIO_PTR_LVALUE /**/
-#define FILE_cnt(fp) ((fp)->_cnt)
-#define STDIO_CNT_LVALUE /**/
-/*#define STDIO_PTR_LVAL_SETS_CNT / **/
-#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/
-#endif
-
-/* USE_STDIO_BASE:
- * This symbol is defined if the _base field (or similar) of the
- * stdio FILE structure can be used to access the stdio buffer for
- * a file handle. If this is defined, then the FILE_base(fp) macro
- * will also be defined and should be used to access this field.
- * Also, the FILE_bufsiz(fp) macro will be defined and should be used
- * to determine the number of bytes in the buffer. USE_STDIO_BASE
- * will never be defined unless USE_STDIO_PTR is.
- */
-/* FILE_base:
- * This macro is used to access the _base field (or equivalent) of the
- * FILE structure pointed to by its argument. This macro will always be
- * defined if USE_STDIO_BASE is defined.
- */
-/* FILE_bufsiz:
- * This macro is used to determine the number of bytes in the I/O
- * buffer pointed to by _base field (or equivalent) of the FILE
- * structure pointed to its argument. This macro will always be defined
- * if USE_STDIO_BASE is defined.
- */
-#define USE_STDIO_BASE /**/
-#ifdef USE_STDIO_BASE
-#define FILE_base(fp) ((fp)->_base)
-#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
-#endif
-
-/* USE_STRUCT_COPY:
- * This symbol, if defined, indicates that this C compiler knows how
- * to copy structures. If undefined, you'll need to use a block copy
- * routine of some sort instead.
- */
-#define USE_STRUCT_COPY /**/
-
-/* HAS_STRERROR:
- * This symbol, if defined, indicates that the strerror routine is
- * available to translate error numbers to strings. See the writeup
- * of Strerror() in this file before you try to define your own.
- */
-/* HAS_SYS_ERRLIST:
- * This symbol, if defined, indicates that the sys_errlist array is
- * available to translate error numbers to strings. The extern int
- * sys_nerr gives the size of that table.
- */
-/* Strerror:
- * This preprocessor symbol is defined as a macro if strerror() is
- * not available to translate error numbers to strings but sys_errlist[]
- * array is there.
- */
-#define HAS_STRERROR /**/
#define HAS_SYS_ERRLIST /**/
-#define Strerror(e) strerror(e)
-
-/* HAS_STRERROR_R:
- * This symbol, if defined, indicates that the strerror_r routine
- * is available to strerror re-entrantly.
- */
-/* STRERROR_R_PROTO:
- * This symbol encodes the prototype of strerror_r.
- * It is zero if d_strerror_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r
- * is defined.
- */
-/*#define HAS_STRERROR_R / **/
-#define STRERROR_R_PROTO 0 /**/
/* HAS_STRTOUL:
* This symbol, if defined, indicates that the strtoul routine is
*/
#define HAS_STRTOUL /**/
-/* HAS_TIME:
- * This symbol, if defined, indicates that the time() routine exists.
- */
-/* Time_t:
- * This symbol holds the type returned by time(). It can be long,
- * or time_t on BSD sites (in which case <sys/types.h> should be
- * included).
- */
-#define HAS_TIME /**/
-#define Time_t time_t /* Time type */
-
-/* HAS_TIMES:
- * This symbol, if defined, indicates that the times() routine exists.
- * Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
- */
-#define HAS_TIMES /**/
-
-/* HAS_TMPNAM_R:
- * This symbol, if defined, indicates that the tmpnam_r routine
- * is available to tmpnam re-entrantly.
- */
-/* TMPNAM_R_PROTO:
- * This symbol encodes the prototype of tmpnam_r.
- * It is zero if d_tmpnam_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r
- * is defined.
- */
-/*#define HAS_TMPNAM_R / **/
-#define TMPNAM_R_PROTO 0 /**/
-
-/* HAS_TTYNAME_R:
- * This symbol, if defined, indicates that the ttyname_r routine
- * is available to ttyname re-entrantly.
- */
-/* TTYNAME_R_PROTO:
- * This symbol encodes the prototype of ttyname_r.
- * It is zero if d_ttyname_r is undef, and one of the
- * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ttyname_r
- * is defined.
- */
-/*#define HAS_TTYNAME_R / **/
-#define TTYNAME_R_PROTO 0 /**/
-
/* HAS_UNION_SEMUN:
* This symbol, if defined, indicates that the union semun is
* defined by including <sys/sem.h>. If not, the user code
*/
#define Signal_t void /* Signal handler's return type */
-/* HASVOLATILE:
- * This symbol, if defined, indicates that this C compiler knows about
- * the volatile declaration.
- */
-#define HASVOLATILE /**/
-#ifndef HASVOLATILE
-#define volatile
-#endif
-
-/* HAS_VPRINTF:
- * This symbol, if defined, indicates that the vprintf routine is available
- * to printf with a pointer to an argument list. If unavailable, you
- * may need to write your own, probably in terms of _doprnt().
- */
-/* USE_CHAR_VSPRINTF:
- * This symbol is defined if this system has vsprintf() returning type
- * (char*). The trend seems to be to declare it as "int vsprintf()". It
- * is up to the package author to declare vsprintf correctly based on the
- * symbol.
- */
-#define HAS_VPRINTF /**/
-/*#define USE_CHAR_VSPRINTF / **/
-
-/* DOUBLESIZE:
- * This symbol contains the size of a double, so that the C preprocessor
- * can make decisions based on it.
- */
-#define DOUBLESIZE 8 /**/
-
-/* EBCDIC:
- * This symbol, if defined, indicates that this system uses
- * EBCDIC encoding.
- */
-/*#define EBCDIC / **/
-
-/* Fpos_t:
- * This symbol holds the type used to declare file positions in libc.
- * It can be fpos_t, long, uint, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Fpos_t fpos_t /* File position type */
-
-/* Gid_t_f:
- * This symbol defines the format string used for printing a Gid_t.
- */
-#define Gid_t_f "ld" /**/
-
-/* Gid_t_sign:
- * This symbol holds the signedness of a Gid_t.
- * 1 for unsigned, -1 for signed.
- */
-#define Gid_t_sign -1 /* GID sign */
-
-/* Gid_t_size:
- * This symbol holds the size of a Gid_t in bytes.
- */
-#define Gid_t_size 4 /* GID size */
-
-/* Gid_t:
- * This symbol holds the return type of getgid() and the type of
- * argument to setrgid() and related functions. Typically,
- * it is the type of group ids in the kernel. It can be int, ushort,
- * gid_t, etc... It may be necessary to include <sys/types.h> to get
- * any typedef'ed information.
- */
-#define Gid_t gid_t /* Type for getgid(), etc... */
-
/* I_DIRENT:
* This symbol, if defined, indicates to the C program that it should
* include <dirent.h>. Using this symbol also triggers the definition
/*#define I_GRP / **/
/*#define GRPASSWD / **/
-/* I_MACH_CTHREADS:
- * This symbol, if defined, indicates to the C program that it should
- * include <mach/cthreads.h>.
- */
-/*#define I_MACH_CTHREADS / **/
-
/* I_NDBM:
* This symbol, if defined, indicates that <ndbm.h> exists and should
* be included.
*/
/*#define I_NET_ERRNO / **/
-/* I_PTHREAD:
- * This symbol, if defined, indicates to the C program that it should
- * include <pthread.h>.
- */
-/*#define I_PTHREAD / **/
-
/* I_PWD:
* This symbol, if defined, indicates to the C program that it should
* include <pwd.h>.
/*#define PWGECOS / **/
/*#define PWPASSWD / **/
-/* I_SYS_ACCESS:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/access.h>.
- */
-/*#define I_SYS_ACCESS / **/
-
-/* I_SYS_SECURITY:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/security.h>.
- */
-/*#define I_SYS_SECURITY / **/
-
/* I_SYSUIO:
* This symbol, if defined, indicates that <sys/uio.h> exists and
* should be included.
/*#define I_TERMIOS / **/
/*#define I_SGTTY / **/
-/* I_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <time.h>.
- */
-/* I_SYS_TIME:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h>.
- */
-/* I_SYS_TIME_KERNEL:
- * This symbol, if defined, indicates to the C program that it should
- * include <sys/time.h> with KERNEL defined.
- */
-/* HAS_TM_TM_ZONE:
- * This symbol, if defined, indicates to the C program that
- * the struct tm has a tm_zone field.
+/* Free_t:
+ * This variable contains the return type of free(). It is usually
+ * void, but occasionally int.
*/
-/* HAS_TM_TM_GMTOFF:
- * This symbol, if defined, indicates to the C program that
- * the struct tm has a tm_gmtoff field.
+/* Malloc_t:
+ * This symbol is the type of pointer returned by malloc and realloc.
*/
-#define I_TIME /**/
-/*#define I_SYS_TIME / **/
-/*#define I_SYS_TIME_KERNEL / **/
-/*#define HAS_TM_TM_ZONE / **/
-/*#define HAS_TM_TM_GMTOFF / **/
+#define Malloc_t void * /**/
+#define Free_t void /**/
-/* I_STDARG:
- * This symbol, if defined, indicates that <stdarg.h> exists and should
- * be included.
- */
-/* I_VARARGS:
- * This symbol, if defined, indicates to the C program that it should
- * include <varargs.h>.
+/* PERL_MALLOC_WRAP:
+ * This symbol, if defined, indicates that we'd like malloc wrap checks.
*/
-#define I_STDARG /**/
-/*#define I_VARARGS / **/
-
-/* PERL_INC_VERSION_LIST:
- * This variable specifies the list of subdirectories in over
- * which perl.c:incpush() and lib/lib.pm will automatically
- * search when adding directories to @INC, in a format suitable
- * for a C initialization string. See the inc_version_list entry
- * in Porting/Glossary for more details.
- */
-/*#define PERL_INC_VERSION_LIST 0 / **/
-
-/* INSTALL_USR_BIN_PERL:
- * This symbol, if defined, indicates that Perl is to be installed
- * also as /usr/bin/perl.
- */
-/*#define INSTALL_USR_BIN_PERL / **/
-
-/* Off_t:
- * This symbol holds the type used to declare offsets in the kernel.
- * It can be int, long, off_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-/* LSEEKSIZE:
- * This symbol holds the number of bytes used by the Off_t.
- */
-/* Off_t_size:
- * This symbol holds the number of bytes used by the Off_t.
- */
-#define Off_t long /* <offset> type */
-#define LSEEKSIZE 4 /* <offset> size */
-#define Off_t_size 4 /* <offset> size */
-
-/* Free_t:
- * This variable contains the return type of free(). It is usually
- * void, but occasionally int.
- */
-/* Malloc_t:
- * This symbol is the type of pointer returned by malloc and realloc.
- */
-#define Malloc_t void * /**/
-#define Free_t void /**/
-
-/* PERL_MALLOC_WRAP:
- * This symbol, if defined, indicates that we'd like malloc wrap checks.
- */
-#define PERL_MALLOC_WRAP /**/
+#define PERL_MALLOC_WRAP /**/
/* MYMALLOC:
* This symbol, if defined, indicates that we're using our own malloc.
*/
/*#define MYMALLOC / **/
-/* Mode_t:
- * This symbol holds the type used to declare file modes
- * for systems calls. It is usually mode_t, but may be
- * int or unsigned short. It may be necessary to include <sys/types.h>
- * to get any typedef'ed information.
- */
-#define Mode_t mode_t /* file mode parameter for system calls */
-
-/* VAL_O_NONBLOCK:
- * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
- * non-blocking I/O for the file descriptor. Note that there is no way
- * back, i.e. you cannot turn it blocking again this way. If you wish to
- * alternatively switch between blocking and non-blocking, use the
- * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
- */
-/* VAL_EAGAIN:
- * This symbol holds the errno error code set by read() when no data was
- * present on the non-blocking file descriptor.
- */
-/* RD_NODATA:
- * This symbol holds the return code from read() when no data is present
- * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
- * not defined, then you can't distinguish between no data and EOF by
- * issuing a read(). You'll have to find another way to tell for sure!
- */
-/* EOF_NONBLOCK:
- * This symbol, if defined, indicates to the C program that a read() on
- * a non-blocking file descriptor will return 0 on EOF, and not the value
- * held in RD_NODATA (-1 usually, in that case!).
- */
-#define VAL_O_NONBLOCK O_NONBLOCK
-#define VAL_EAGAIN EAGAIN
-#define RD_NODATA -1
-#define EOF_NONBLOCK
-
-/* Netdb_host_t:
- * This symbol holds the type used for the 1st argument
- * to gethostbyaddr().
- */
-/* Netdb_hlen_t:
- * This symbol holds the type used for the 2nd argument
- * to gethostbyaddr().
- */
-/* Netdb_name_t:
- * This symbol holds the type used for the argument to
- * gethostbyname().
- */
-/* Netdb_net_t:
- * This symbol holds the type used for the 1st argument to
- * getnetbyaddr().
- */
-#define Netdb_host_t char * /**/
-#define Netdb_hlen_t int /**/
-#define Netdb_name_t char * /**/
-#define Netdb_net_t long /**/
-
-/* PERL_OTHERLIBDIRS:
- * This variable contains a colon-separated set of paths for the perl
- * binary to search for additional library files or modules.
- * These directories will be tacked to the end of @INC.
- * Perl will automatically search below each path for version-
- * and architecture-specific directories. See PERL_INC_VERSION_LIST
- * for more details.
- */
-/*#define PERL_OTHERLIBDIRS "" / **/
-
-/* Pid_t:
- * This symbol holds the type used to declare process ids in the kernel.
- * It can be int, uint, pid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Pid_t int /* PID type */
-
-/* PRIVLIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- */
-/* PRIVLIB_EXP:
- * This symbol contains the ~name expanded version of PRIVLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-#define PRIVLIB "c:\\perl\\lib" /**/
-#define PRIVLIB_EXP (PerlEnv_lib_path(PERL_VERSION_STRING, NULL)) /**/
-
-/* CAN_PROTOTYPE:
- * If defined, this macro indicates that the C compiler can handle
- * function prototypes.
- */
-/* _:
- * This macro is used to declare function parameters for folks who want
- * to make declarations with prototypes using a different style than
- * the above macros. Use double parentheses. For example:
- *
- * int main _((int argc, char *argv[]));
- */
-#define CAN_PROTOTYPE /**/
-#ifdef CAN_PROTOTYPE
-#define _(args) args
-#else
-#define _(args) ()
-#endif
-
-/* PTRSIZE:
- * This symbol contains the size of a pointer, so that the C preprocessor
- * can make decisions based on it. It will be sizeof(void *) if
- * the compiler supports (void *); otherwise it will be
- * sizeof(char *).
- */
-#define PTRSIZE 4 /**/
-
-/* HAS_QUAD:
- * This symbol, if defined, tells that there's a 64-bit integer type,
- * Quad_t, and its unsigned counterpart, Uquad_t. QUADKIND will be one
- * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, QUAD_IS_INT64_T,
- * or QUAD_IS___INT64.
- */
-#define HAS_QUAD /**/
-#ifdef HAS_QUAD
-# define Quad_t long long /**/
-# define Uquad_t unsigned long long /**/
-# define QUADKIND 3 /**/
-# define QUAD_IS_INT 1
-# define QUAD_IS_LONG 2
-# define QUAD_IS_LONG_LONG 3
-# define QUAD_IS_INT64_T 4
-# define QUAD_IS___INT64 5
-#endif
-
-/* Drand01:
- * This macro is to be used to generate uniformly distributed
- * random numbers over the range [0., 1.[. You may have to supply
- * an 'extern double drand48();' in your program since SunOS 4.1.3
- * doesn't provide you with anything relevant in its headers.
- * See HAS_DRAND48_PROTO.
- */
-/* Rand_seed_t:
- * This symbol defines the type of the argument of the
- * random seed function.
- */
-/* seedDrand01:
- * This symbol defines the macro to be used in seeding the
- * random number generator (see Drand01).
- */
-/* RANDBITS:
- * This symbol indicates how many bits are produced by the
- * function used to generate normalized random numbers.
- * Values include 15, 16, 31, and 48.
- */
-#define Drand01() Perl_drand48() /**/
-#define Rand_seed_t U32 /**/
-#define seedDrand01(x) Perl_drand48_init((Rand_seed_t)x) /**/
-#define RANDBITS 48 /**/
-
-/* Select_fd_set_t:
- * This symbol holds the type used for the 2nd, 3rd, and 4th
- * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
- * is defined, and 'int *' otherwise. This is only useful if you
- * have select(), of course.
- */
-#define Select_fd_set_t Perl_fd_set * /**/
-
/* SH_PATH:
* This symbol contains the full pathname to the shell used on this
* on this system to execute Bourne shell scripts. Usually, this will be
#define SIG_NUM 0, 1, 2, 21, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0 /**/
#define SIG_SIZE 27 /**/
-/* SITEARCH:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-dependent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
+/* USE_CROSS_COMPILE:
+ * This symbol, if defined, indicates that Perl is being cross-compiled.
*/
-/* SITEARCH_EXP:
- * This symbol contains the ~name expanded version of SITEARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* PERL_TARGETARCH:
+ * This symbol, if defined, indicates the target architecture
+ * Perl has been cross-compiled to. Undefined if not a cross-compile.
*/
-#define SITEARCH "c:\\perl\\site\\lib" /**/
-/*#define SITEARCH_EXP "" / **/
+#ifndef USE_CROSS_COMPILE
+/*#define USE_CROSS_COMPILE / **/
+#define PERL_TARGETARCH "" /**/
+#endif
-/* SITELIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * After perl has been installed, users may install their own local
- * architecture-independent modules in this directory with
- * MakeMaker Makefile.PL
- * or equivalent. See INSTALL for details.
- */
-/* SITELIB_EXP:
- * This symbol contains the ~name expanded version of SITELIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/* SITELIB_STEM:
- * This define is SITELIB_EXP with any trailing version-specific component
- * removed. The elements in inc_version_list (inc_version_list.U) can
- * be tacked onto this variable to generate a list of directories to search.
+/* PERL_USE_DEVEL:
+ * This symbol, if defined, indicates that Perl was configured with
+ * -Dusedevel, to enable development features. This should not be
+ * done for production builds.
*/
-#define SITELIB "c:\\perl\\site\\lib" /**/
-#define SITELIB_EXP (PerlEnv_sitelib_path(PERL_VERSION_STRING, NULL)) /**/
-#define SITELIB_STEM "" /**/
+/*#define PERL_USE_DEVEL / **/
-/* Size_t_size:
- * This symbol holds the size of a Size_t in bytes.
+/* HAS_ATOLF:
+ * This symbol, if defined, indicates that the atolf routine is
+ * available to convert strings into long doubles.
*/
-#define Size_t_size 4 /**/
-
-/* Size_t:
- * This symbol holds the type used to declare length parameters
- * for string functions. It is usually size_t, but may be
- * unsigned long, int, etc. It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Size_t size_t /* length parameter for string functions */
-
-/* Sock_size_t:
- * This symbol holds the type used for the size argument of
- * various socket calls (just the base type, not the pointer-to).
- */
-#define Sock_size_t int /**/
-
-/* SSize_t:
- * This symbol holds the type used by functions that return
- * a count of bytes or an error condition. It must be a signed type.
- * It is usually ssize_t, but may be long or int, etc.
- * It may be necessary to include <sys/types.h> or <unistd.h>
- * to get any typedef'ed information.
- * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
- */
-#define SSize_t int /* signed count of bytes */
-
-/* STDCHAR:
- * This symbol is defined to be the type of char used in stdio.h.
- * It has the values "unsigned char" or "char".
- */
-#define STDCHAR char /**/
-
-/* Uid_t_f:
- * This symbol defines the format string used for printing a Uid_t.
- */
-#define Uid_t_f "ld" /**/
-
-/* Uid_t_sign:
- * This symbol holds the signedness of a Uid_t.
- * 1 for unsigned, -1 for signed.
- */
-#define Uid_t_sign -1 /* UID sign */
-
-/* Uid_t_size:
- * This symbol holds the size of a Uid_t in bytes.
- */
-#define Uid_t_size 4 /* UID size */
-
-/* Uid_t:
- * This symbol holds the type used to declare user ids in the kernel.
- * It can be int, ushort, uid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
- */
-#define Uid_t uid_t /* UID type */
-
-/* USE_ITHREADS:
- * This symbol, if defined, indicates that Perl should be built to
- * use the interpreter-based threading implementation.
- */
-/* USE_5005THREADS:
- * This symbol, if defined, indicates that Perl should be built to
- * use the 5.005-based threading implementation.
- * Only valid up to 5.8.x.
- */
-/* OLD_PTHREADS_API:
- * This symbol, if defined, indicates that Perl should
- * be built to use the old draft POSIX threads API.
- */
-/* USE_REENTRANT_API:
- * This symbol, if defined, indicates that Perl should
- * try to use the various _r versions of library functions.
- * This is extremely experimental.
- */
-/*#define USE_5005THREADS / **/
-/*#define USE_ITHREADS / **/
-#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
-#define USE_THREADS /* until src is revised*/
-#endif
-/*#define OLD_PTHREADS_API / **/
-/*#define USE_REENTRANT_API / **/
-
-/* PERL_VENDORARCH:
- * If defined, this symbol contains the name of a private library.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world.
- * It may have a ~ on the front.
- * The standard distribution will put nothing in this directory.
- * Vendors who distribute perl may wish to place their own
- * architecture-dependent modules and extensions in this directory with
- * MakeMaker Makefile.PL INSTALLDIRS=vendor
- * or equivalent. See INSTALL for details.
- */
-/* PERL_VENDORARCH_EXP:
- * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/*#define PERL_VENDORARCH "" / **/
-/*#define PERL_VENDORARCH_EXP "" / **/
-
-/* PERL_VENDORLIB_EXP:
- * This symbol contains the ~name expanded version of VENDORLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
- */
-/* PERL_VENDORLIB_STEM:
- * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
- * removed. The elements in inc_version_list (inc_version_list.U) can
- * be tacked onto this variable to generate a list of directories to search.
- */
-/*#define PERL_VENDORLIB_EXP "" / **/
-/*#define PERL_VENDORLIB_STEM "" / **/
-
-/* USE_CROSS_COMPILE:
- * This symbol, if defined, indicates that Perl is being cross-compiled.
- */
-/* PERL_TARGETARCH:
- * This symbol, if defined, indicates the target architecture
- * Perl has been cross-compiled to. Undefined if not a cross-compile.
- */
-#ifndef USE_CROSS_COMPILE
-/*#define USE_CROSS_COMPILE / **/
-#define PERL_TARGETARCH "" /**/
-#endif
-
-/* PERL_USE_DEVEL:
- * This symbol, if defined, indicates that Perl was configured with
- * -Dusedevel, to enable development features. This should not be
- * done for production builds.
- */
-/*#define PERL_USE_DEVEL / **/
-
-/* HAS_ATOLF:
- * This symbol, if defined, indicates that the atolf routine is
- * available to convert strings into long doubles.
- */
-/*#define HAS_ATOLF / **/
+/*#define HAS_ATOLF / **/
/* HAS_ATOLL:
* This symbol, if defined, indicates that the atoll routine is
* This symbol, if defined, indicates that the acosh routine is
* available to do the inverse hyperbolic cosine function.
*/
-/*#define HAS_ACOSH / **/
+#define HAS_ACOSH /**/
/* HAS_AINTL:
* This symbol, if defined, indicates that the aintl routine is
*/
/*#define HAS_AINTL / **/
+/* HAS_ASINH:
+ * This symbol, if defined, indicates that the asinh routine is
+ * available to do the inverse hyperbolic sine function.
+ */
+#define HAS_ASINH /**/
+
+/* HAS_ATANH:
+ * This symbol, if defined, indicates that the atanh routine is
+ * available to do the inverse hyperbolic tangent function.
+ */
+#define HAS_ATANH /**/
+
/* HAS_BUILTIN_CHOOSE_EXPR:
* Can we handle GCC builtin for compile-time ternary-like expressions
*/
*/
/*#define HAS_STRUCT_CMSGHDR / **/
+/* HAS_COPYSIGN:
+ * This symbol, if defined, indicates that the copysign routine is
+ * available to do the copysign function.
+ */
+#define HAS_COPYSIGN /**/
+
/* HAS_COPYSIGNL:
* This symbol, if defined, indicates that the copysignl routine is
* available. If aintl is also present we can emulate modfl.
*/
-/*#define HAS_COPYSIGNL / **/
+#define HAS_COPYSIGNL /**/
/* USE_CPLUSPLUS:
* This symbol, if defined, indicates that a C++ compiler was
*/
/*#define DLSYM_NEEDS_UNDERSCORE / **/
+/* HAS_ERF:
+ * This symbol, if defined, indicates that the erf routine is
+ * available to do the error function.
+ */
+#define HAS_ERF /**/
+
+/* HAS_ERFC:
+ * This symbol, if defined, indicates that the erfc routine is
+ * available to do the complementary error function.
+ */
+/*#define HAS_ERFC / **/
+
+/* HAS_EXP2:
+ * This symbol, if defined, indicates that the exp2 routine is
+ * available to do the 2**x function.
+ */
+#define HAS_EXP2 /**/
+
+/* HAS_EXPM1:
+ * This symbol, if defined, indicates that the expm1 routine is
+ * available to do the exp(x) - 1 when x is near 1 function.
+ */
+#define HAS_EXPM1 /**/
+
/* HAS_FAST_STDIO:
* This symbol, if defined, indicates that the "fast stdio"
* is available to manipulate the stdio buffers directly.
*/
/*#define FCNTL_CAN_LOCK / **/
+/* HAS_FDCLOSE:
+ * This symbol, if defined, indicates that the fdclose routine is
+ * available to free a FILE structure without closing the underlying
+ * file descriptor. This function appeared in FreeBSD 10.2.
+ */
+/*#define HAS_FDCLOSE / **/
+
+/* HAS_FDIM:
+ * This symbol, if defined, indicates that the fdim routine is
+ * available to do the positive difference function.
+ */
+/*#define HAS_FDIM / **/
+
/* HAS_FEGETROUND:
* This symbol, if defined, indicates that the fegetround routine is
* available to return the macro corresponding to the current rounding
* This symbol, if defined, indicates that the finite routine is
* available to check whether a double is finite (non-infinity non-NaN).
*/
-/*#define HAS_FINITE / **/
+#define HAS_FINITE /**/
/* HAS_FINITEL:
* This symbol, if defined, indicates that the finitel routine is
*/
#define HAS_FLOCK_PROTO /**/
+/* HAS_FMA:
+ * This symbol, if defined, indicates that the fma routine is
+ * available to do the multiply-add function.
+ */
+/*#define HAS_FMA / **/
+
+/* HAS_FMAX:
+ * This symbol, if defined, indicates that the fmax routine is
+ * available to do the maximum function.
+ */
+#define HAS_FMAX /**/
+
+/* HAS_FMIN:
+ * This symbol, if defined, indicates that the fmin routine is
+ * available to do the minimum function.
+ */
+#define HAS_FMIN /**/
+
/* HAS_FP_CLASS:
* This symbol, if defined, indicates that the fp_class routine is
* available to classify doubles. Available for example in Digital UNIX.
* available to break a long double floating-point number into
* a normalized fraction and an integral power of 2.
*/
-/*#define HAS_FREXPL / **/
+#define HAS_FREXPL /**/
/* HAS_STRUCT_FS_DATA:
* This symbol, if defined, indicates that the struct fs_data
*/
/*#define HAS_STRUCT_FS_DATA / **/
+/* HAS_FCHMODAT:
+ * This symbol is defined if the fchmodat() routine is available.
+ */
+/* HAS_LINKAT:
+ * This symbol is defined if the linkat() routine is available.
+ */
+/* HAS_OPENAT:
+ * This symbol is defined if the openat() routine is available.
+ */
+/* HAS_RENAMEAT:
+ * This symbol is defined if the renameat() routine is available.
+ */
+/* HAS_UNLINKAT:
+ * This symbol is defined if the unlinkat() routine is available.
+ */
+/*#define HAS_FCHMODAT / **/
+/*#define HAS_LINKAT / **/
+/*#define HAS_OPENAT / **/
+/*#define HAS_RENAMEAT / **/
+/*#define HAS_UNLINKAT / **/
+
/* HAS_FSEEKO:
* This symbol, if defined, indicates that the fseeko routine is
* available to fseek beyond 32 bits (useful for ILP32 hosts).
*/
/*#define HAS_FUTIMES / **/
+/* HAS_GAI_STRERROR:
+ * This symbol, if defined, indicates that the gai_strerror routine
+ * is available to translate error codes returned by getaddrinfo()
+ * into human readable strings.
+ */
+/*#define HAS_GAI_STRERROR / **/
+
/* HAS_GETADDRINFO:
* This symbol, if defined, indicates that the getaddrinfo() function
* is available for use.
*/
/*#define HAS_HASMNTOPT / **/
+/* HAS_HYPOT:
+ * This symbol, if defined, indicates that the hypot routine is
+ * available to do the hypotenuse function.
+ */
+#define HAS_HYPOT /**/
+
+/* HAS_ILOGB:
+ * This symbol, if defined, indicates that the ilogb routine is
+ * available to get integer exponent of a floating-point value.
+ */
+#define HAS_ILOGB /**/
+
/* HAS_ILOGBL:
* This symbol, if defined, indicates that the ilogbl routine is
* available. If scalbnl is also present we can emulate frexpl.
*/
-/*#define HAS_ILOGBL / **/
+#define HAS_ILOGBL /**/
/* HAS_INETNTOP:
* This symbol, if defined, indicates that the inet_ntop() function
* This symbol, if defined, indicates that the isinf routine is
* available to check whether a double is an infinity.
*/
-/*#define HAS_ISINF / **/
+#define HAS_ISINF /**/
/* HAS_ISINFL:
* This symbol, if defined, indicates that the isinfl routine is
*/
/*#define HAS_ISINFL / **/
+/* HAS_ISLESS:
+ * This symbol, if defined, indicates that the isless routine is
+ * available to do the isless function.
+ */
+#define HAS_ISLESS /**/
+
/* HAS_ISNAN:
* This symbol, if defined, indicates that the isnan routine is
* available to check whether a double is a NaN.
* This symbol, if defined, indicates that the isnanl routine is
* available to check whether a long double is a NaN.
*/
-/*#define HAS_ISNANL / **/
+#define HAS_ISNANL /**/
+
+/* HAS_ISNORMAL:
+ * This symbol, if defined, indicates that the isnormal routine is
+ * available to check whether a double is normal (non-zero normalized).
+ */
+#define HAS_ISNORMAL /**/
/* HAS_J0:
* This symbol, if defined, indicates to the C program that the
* j0l() function is available for Bessel functions of the first
* kind of the order zero, for long doubles.
*/
-/*#define HAS_J0 / **/
+#define HAS_J0 /**/
/*#define HAS_J0L / **/
+/* HAS_LC_MONETARY_2008:
+ * This symbol, if defined, indicates that the localeconv routine is
+ * available and has the additional members added in POSIX 1003.1-2008.
+ */
+/*#define HAS_LC_MONETARY_2008 / **/
+
/* HAS_LDBL_DIG:
* This symbol, if defined, indicates that this system's <float.h>
* or <limits.h> defines the symbol LDBL_DIG, which is the number
*/
#define HAS_LDBL_DIG /**/
+/* HAS_LGAMMA:
+ * This symbol, if defined, indicates that the lgamma routine is
+ * available to do the log gamma function. See also HAS_TGAMMA and
+ * HAS_LGAMMA_R.
+ */
+#define HAS_LGAMMA /**/
+
+/* HAS_LGAMMA_R:
+ * This symbol, if defined, indicates that the lgamma_r routine is
+ * available to do the log gamma function without using the global
+ * signgam variable.
+ */
+/*#define HAS_LGAMMA_R / **/
+
/* LIBM_LIB_VERSION:
* This symbol, if defined, indicates that libm exports _LIB_VERSION
* and that math.h defines the enum to manipulate it.
*/
/*#define LIBM_LIB_VERSION / **/
+/* HAS_LLRINT:
+ * This symbol, if defined, indicates that the llrint routine is
+ * available to return the long long value closest to a double
+ * (according to the current rounding mode).
+ */
+#define HAS_LLRINT /**/
+
+/* HAS_LLRINTL:
+ * This symbol, if defined, indicates that the llrintl routine is
+ * available to return the long long value closest to a long double
+ * (according to the current rounding mode).
+ */
+#define HAS_LLRINTL /**/
+
+/* HAS_LLROUND:
+ * This symbol, if defined, indicates that the llround routine is
+ * available to return the nearest long long value.
+ */
+#define HAS_LLROUND /**/
+
+/* HAS_LLROUNDL:
+ * This symbol, if defined, indicates that the llroundl routine is
+ * available to return the nearest long long value away from zero of
+ * the long double argument value.
+ */
+#define HAS_LLROUNDL /**/
+
+/* HAS_LOG1P:
+ * This symbol, if defined, indicates that the log1p routine is
+ * available to do the logarithm of 1 plus argument function.
+ */
+#define HAS_LOG1P /**/
+
+/* HAS_LOG2:
+ * This symbol, if defined, indicates that the log2 routine is
+ * available to do the log2 function.
+ */
+#define HAS_LOG2 /**/
+
+/* HAS_LOGB:
+ * This symbol, if defined, indicates that the logb routine is
+ * available to do the logb function.
+ */
+#define HAS_LOGB /**/
+
+/* HAS_LRINT:
+ * This symbol, if defined, indicates that the lrint routine is
+ * available to return the integral value closest to a double
+ * (according to the current rounding mode).
+ */
+#define HAS_LRINT /**/
+
+/* HAS_LRINTL:
+ * This symbol, if defined, indicates that the lrintl routine is
+ * available to return the integral value closest to a long double
+ * (according to the current rounding mode).
+ */
+#define HAS_LRINTL /**/
+
+/* HAS_LROUND:
+ * This symbol, if defined, indicates that the lround routine is
+ * available to return the nearest integral value.
+ */
+#define HAS_LROUND /**/
+
+/* HAS_LROUNDL:
+ * This symbol, if defined, indicates that the lroundl routine is
+ * available to return the nearest integral value away from zero of
+ * the long double argument value.
+ */
+#define HAS_LROUNDL /**/
+
/* HAS_MADVISE:
* This symbol, if defined, indicates that the madvise system call is
* available to map a file into memory.
*/
/*#define HAS_MALLOC_GOOD_SIZE / **/
+/* HAS_MEMMEM:
+ * This symbol, if defined, indicates that the memmem routine is
+ * available to return a pointer to the start of the first occurance
+ * of a substring in a memory area (or NULL if not found).
+ */
+/*#define HAS_MEMMEM / **/
+
+/* HAS_MEMRCHR:
+ * This symbol, if defined, indicates that the memrchr routine is
+ * available to return a pointer to the last occurrence of a byte in
+ * a memory area (or NULL if not found).
+ */
+/*#define HAS_MEMRCHR / **/
+
/* HAS_MKDTEMP:
* This symbol, if defined, indicates that the mkdtemp routine is
* available to exclusively create a uniquely named temporary directory.
* a prototype for the modfl() function. Otherwise, it is up
* to the program to supply one.
*/
-/* HAS_MODFL_POW32_BUG:
- * This symbol, if defined, indicates that the modfl routine is
- * broken for long doubles >= pow(2, 32).
- * For example from 4294967303.150000 one would get 4294967302.000000
- * and 1.150000. The bug has been seen in certain versions of glibc,
- * release 2.2.2 is known to be okay.
- */
-/*#define HAS_MODFL / **/
+#define HAS_MODFL /**/
/*#define HAS_MODFL_PROTO / **/
-/*#define HAS_MODFL_POW32_BUG / **/
/* HAS_MPROTECT:
* This symbol, if defined, indicates that the mprotect system call is
*/
/*#define HAS_STRUCT_MSGHDR / **/
+/* HAS_NAN:
+ * This symbol, if defined, indicates that the nan routine is
+ * available to generate NaN.
+ */
+#define HAS_NAN /**/
+
+/* HAS_NEARBYINT:
+ * This symbol, if defined, indicates that the nearbyint routine is
+ * available to return the integral value closest to (according to
+ * the current rounding mode) to x.
+ */
+#define HAS_NEARBYINT /**/
+
+/* HAS_NEWLOCALE:
+ * This symbol, if defined, indicates that the newlocale routine is
+ * available to return a new locale object or modify an existing
+ * locale object.
+ */
+/* HAS_FREELOCALE:
+ * This symbol, if defined, indicates that the freelocale routine is
+ * available to deallocates the resources associated with a locale object.
+ */
+/* HAS_USELOCALE:
+ * This symbol, if defined, indicates that the uselocale routine is
+ * available to set the current locale for the calling thread.
+ */
+/* HAS_QUERYLOCALE:
+ * This symbol, if defined, indicates that the querylocale routine is
+ * available to return the name of the locale for a category mask.
+ */
+/* I_XLOCALE:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <xlocale.h> to get uselocale() and its friends.
+ */
+/*#define HAS_NEWLOCALE / **/
+/*#define HAS_FREELOCALE / **/
+/*#define HAS_USELOCALE / **/
+/*#define HAS_QUERYLOCALE / **/
+/*#define I_XLOCALE / **/
+
+/* HAS_NEXTAFTER:
+ * This symbol, if defined, indicates that the nextafter routine is
+ * available to return the next machine representable double from
+ * x in direction y.
+ */
+#define HAS_NEXTAFTER /**/
+
+/* HAS_NEXTTOWARD:
+ * This symbol, if defined, indicates that the nexttoward routine is
+ * available to return the next machine representable long double from
+ * x in direction y.
+ */
+#define HAS_NEXTTOWARD /**/
+
/* HAS_NL_LANGINFO:
* This symbol, if defined, indicates that the nl_langinfo routine is
* available to return local data. You will also need <langinfo.h>
/* HAS_PRCTL:
* This symbol, if defined, indicates that the prctl routine is
* available to set process title.
+ * Note that there are at least two prctl variants: Linux and Irix.
+ * While they are somewhat similar, they are incompatible.
*/
/* HAS_PRCTL_SET_NAME:
* This symbol, if defined, indicates that the prctl routine is
*/
/*#define HAS_RECVMSG / **/
+/* HAS_REMAINDER:
+ * This symbol, if defined, indicates that the remainder routine is
+ * available to return the floating-point remainder.
+ */
+#define HAS_REMAINDER /**/
+
+/* HAS_REMQUO:
+ * This symbol, if defined, indicates that the remquo routine is
+ * available to return the remainder and part of quotient.
+ */
+#define HAS_REMQUO /**/
+
+/* HAS_RINT:
+ * This symbol, if defined, indicates that the rint routine is
+ * available to return the nearest integral value to x as double
+ * using the current rounding mode.
+ */
+#define HAS_RINT /**/
+
+/* HAS_ROUND:
+ * This symbol, if defined, indicates that the round routine is
+ * available to round to nearest integer, away from zero.
+ */
+#define HAS_ROUND /**/
+
/* HAS_SBRK_PROTO:
* This symbol, if defined, indicates that the system provides
* a prototype for the sbrk() function. Otherwise, it is up
*/
/*#define HAS_SBRK_PROTO / **/
+/* HAS_SCALBN:
+ * This symbol, if defined, indicates that the scalbn routine is
+ * available to multiply floating-point number by integral power
+ * of radix.
+ */
+#define HAS_SCALBN /**/
+
/* HAS_SCALBNL:
* This symbol, if defined, indicates that the scalbnl routine is
* available. If ilogbl is also present we can emulate frexpl.
*/
-/*#define HAS_SCALBNL / **/
+#define HAS_SCALBNL /**/
/* HAS_SENDMSG:
* This symbol, if defined, indicates that the sendmsg routine is
* in perl. Users should call Perl_signbit(), which will be #defined to
* the system's signbit() function or macro if this symbol is defined.
*/
-/*#define HAS_SIGNBIT / **/
+#define HAS_SIGNBIT /**/
/* HAS_SIGPROCMASK:
* This symbol, if defined, indicates that the sigprocmask
*/
/*#define HAS_SOCKS5_INIT / **/
-/* SPRINTF_RETURNS_STRLEN:
- * This variable defines whether sprintf returns the length of the string
- * (as per the ANSI spec). Some C libraries retain compatibility with
- * pre-ANSI C and return a pointer to the passed in buffer; for these
- * this variable will be undef.
- */
-#define SPRINTF_RETURNS_STRLEN /**/
-
/* HAS_SQRTL:
* This symbol, if defined, indicates that the sqrtl routine is
* available to do long double square roots.
*/
-/*#define HAS_SQRTL / **/
+#define HAS_SQRTL /**/
/* HAS_SETRESGID_PROTO:
* This symbol, if defined, indicates that the system provides
*/
/*#define HAS_FSTATVFS / **/
+/* HAS_STRERROR_L:
+ * This symbol, if defined, indicates that the strerror_l routine is
+ * available to return the error message for a given errno value in
+ * a particular locale (identified by a locale_t object).
+ */
+/*#define HAS_STRERROR_L / **/
+
/* HAS_STRFTIME:
* This symbol, if defined, indicates that the strftime routine is
* available to do time formatting.
*/
#define HAS_TELLDIR_PROTO /**/
+/* HAS_TGAMMA:
+ * This symbol, if defined, indicates that the tgamma routine is
+ * available to do the gamma function. See also HAS_LGAMMA.
+ */
+#define HAS_TGAMMA /**/
+
/* HAS_CTIME64:
* This symbol, if defined, indicates that the ctime64 () routine is
* available to do the 64bit variant of ctime ()
*/
/*#define HAS_TIMEGM / **/
+/* HAS_TRUNC:
+ * This symbol, if defined, indicates that the trunc routine is
+ * available to round doubles towards zero.
+ */
+#define HAS_TRUNC /**/
+
/* HAS_TRUNCL:
* This symbol, if defined, indicates that the truncl routine is
* available. If copysignl is also present we can emulate modfl.
*/
-/*#define HAS_TRUNCL / **/
+#define HAS_TRUNCL /**/
/* U32_ALIGNMENT_REQUIRED:
* This symbol, if defined, indicates that you must access
*/
/*#define HAS_WRITEV / **/
+/* DEFAULT_INC_EXCLUDES_DOT:
+ * This symbol, if defined, removes the legacy default behavior of
+ * including '.' at the end of @INC.
+ */
+#define DEFAULT_INC_EXCLUDES_DOT /**/
+
/* USE_DYNAMIC_LOADING:
* This symbol, if defined, indicates that dynamic loading of
* some sort is available.
#define FFLUSH_NULL /**/
/*#define FFLUSH_ALL / **/
-/* I_ASSERT:
- * This symbol, if defined, indicates that <assert.h> exists and
- * could be included by the C program to get the assert() macro.
- */
-#define I_ASSERT /**/
-
/* I_BFD:
* This symbol, if defined, indicates that <bfd.h> exists and
* can be included.
*/
/*#define I_PROT / **/
+/* I_QUADMATH:
+ * This symbol, if defined, indicates that <quadmath.h> exists and
+ * should be included.
+ */
+/*#define I_QUADMATH / **/
+
/* I_SHADOW:
* This symbol, if defined, indicates that <shadow.h> exists and
* should be included.
* This symbol, if defined, indicates that <stdint.h> exists and
* should be included.
*/
-/*#define I_STDINT / **/
+#define I_STDINT /**/
/* I_SUNMATH:
* This symbol, if defined, indicates that <sunmath.h> exists and
*/
/*#define I_USTAT / **/
+/* DOUBLEINFBYTES:
+ * This symbol, if defined, is a comma-separated list of
+ * hexadecimal bytes for the double precision infinity.
+ */
+/* DOUBLENANBYTES:
+ * This symbol, if defined, is a comma-separated list of
+ * hexadecimal bytes (0xHH) for the double precision not-a-number.
+ */
+/* LONGDBLINFBYTES:
+ * This symbol, if defined, is a comma-separated list of
+ * hexadecimal bytes for the long double precision infinity.
+ */
+/* LONGDBLNANBYTES:
+ * This symbol, if defined, is a comma-separated list of
+ * hexadecimal bytes (0xHH) for the long double precision not-a-number.
+ */
+#define DOUBLEINFBYTES 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x7f /**/
+#define DOUBLENANBYTES 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x7f /**/
+#define LONGDBLINFBYTES 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0x7f, 0x00, 0x00 /**/
+#define LONGDBLNANBYTES 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0x00, 0x00 /**/
+
/* PERL_PRIfldbl:
* This symbol, if defined, contains the string used by stdio to
* format long doubles (format 'f') for output.
* This symbol, if defined, contains the string used by stdio to
* format long doubles (format 'f') for input.
*/
+/* DOUBLEKIND:
+ * DOUBLEKIND will be one of
+ * DOUBLE_IS_IEEE_754_32_BIT_LITTLE_ENDIAN
+ * DOUBLE_IS_IEEE_754_32_BIT_BIG_ENDIAN
+ * DOUBLE_IS_IEEE_754_64_BIT_LITTLE_ENDIAN
+ * DOUBLE_IS_IEEE_754_64_BIT_BIG_ENDIAN
+ * DOUBLE_IS_IEEE_754_128_BIT_LITTLE_ENDIAN
+ * DOUBLE_IS_IEEE_754_128_BIT_BIG_ENDIAN
+ * DOUBLE_IS_IEEE_754_64_BIT_MIXED_ENDIAN_LE_BE
+ * DOUBLE_IS_IEEE_754_64_BIT_MIXED_ENDIAN_BE_LE
+ * DOUBLE_IS_VAX_F_FLOAT
+ * DOUBLE_IS_VAX_D_FLOAT
+ * DOUBLE_IS_VAX_G_FLOAT
+ * DOUBLE_IS_IBM_SINGLE_32_BIT
+ * DOUBLE_IS_IBM_DOUBLE_64_BIT
+ * DOUBLE_IS_CRAY_SINGLE_64_BIT
+ * DOUBLE_IS_UNKNOWN_FORMAT
+ */
+/* DOUBLE_HAS_INF:
+ * This symbol, if defined, indicates that the double has
+ * the infinity.
+ */
+/* DOUBLE_HAS_NAN:
+ * This symbol, if defined, indicates that the double has
+ * the not-a-number.
+ */
+/* DOUBLE_HAS_NEGATIVE_ZERO:
+ * This symbol, if defined, indicates that the double has
+ * the negative_zero.
+ */
+/* DOUBLE_HAS_SUBNORMALS:
+ * This symbol, if defined, indicates that the double has
+ * the subnormals (denormals).
+ */
+/* DOUBLE_STYLE_CRAY:
+ * This symbol, if defined, indicates that the double is
+ * the 64-bit CRAY mainframe format.
+ */
+/* DOUBLE_STYLE_IBM:
+ * This symbol, if defined, indicates that the double is
+ * the 64-bit IBM mainframe format.
+ */
+/* DOUBLE_STYLE_IEEE:
+ * This symbol, if defined, indicates that the double is
+ * the 64-bit IEEE 754.
+ */
+/* DOUBLE_STYLE_VAX:
+ * This symbol, if defined, indicates that the double is
+ * the 64-bit VAX format D or G.
+ */
+#define DOUBLEKIND 3 /**/
+#define DOUBLE_IS_IEEE_754_32_BIT_LITTLE_ENDIAN 1
+#define DOUBLE_IS_IEEE_754_32_BIT_BIG_ENDIAN 2
+#define DOUBLE_IS_IEEE_754_64_BIT_LITTLE_ENDIAN 3
+#define DOUBLE_IS_IEEE_754_64_BIT_BIG_ENDIAN 4
+#define DOUBLE_IS_IEEE_754_128_BIT_LITTLE_ENDIAN 5
+#define DOUBLE_IS_IEEE_754_128_BIT_BIG_ENDIAN 6
+#define DOUBLE_IS_IEEE_754_64_BIT_MIXED_ENDIAN_LE_BE 7
+#define DOUBLE_IS_IEEE_754_64_BIT_MIXED_ENDIAN_BE_LE 8
+#define DOUBLE_IS_VAX_F_FLOAT 9
+#define DOUBLE_IS_VAX_D_FLOAT 10
+#define DOUBLE_IS_VAX_G_FLOAT 11
+#define DOUBLE_IS_IBM_SINGLE_32_BIT 12
+#define DOUBLE_IS_IBM_DOUBLE_64_BIT 13
+#define DOUBLE_IS_CRAY_SINGLE_64_BIT 14
+#define DOUBLE_IS_UNKNOWN_FORMAT -1
/*#define PERL_PRIfldbl "Lf" / **/
/*#define PERL_PRIgldbl "Lg" / **/
/*#define PERL_PRIeldbl "Le" / **/
/*#define PERL_SCNfldbl "Lf" / **/
+#define DOUBLE_HAS_INF
+#define DOUBLE_HAS_NAN
+#define DOUBLE_HAS_NEGATIVE_ZERO
+#define DOUBLE_HAS_SUBNORMALS
+#undef DOUBLE_STYLE_CRAY
+#undef DOUBLE_STYLE_IBM
+#define DOUBLE_STYLE_IEEE
+#undef DOUBLE_STYLE_VAX
+
+/* DOUBLEMANTBITS:
+ * This symbol, if defined, tells how many mantissa bits
+ * there are in double precision floating point format.
+ * Note that this is usually DBL_MANT_DIG minus one, since
+ * with the standard IEEE 754 formats DBL_MANT_DIG includes
+ * the implicit bit, which doesn't really exist.
+ */
+/* LONGDBLMANTBITS:
+ * This symbol, if defined, tells how many mantissa bits
+ * there are in long double precision floating point format.
+ * Note that this can be LDBL_MANT_DIG minus one,
+ * since LDBL_MANT_DIG can include the IEEE 754 implicit bit.
+ * The common x86-style 80-bit long double does not have
+ * an implicit bit.
+ */
+/* NVMANTBITS:
+ * This symbol, if defined, tells how many mantissa bits
+ * (not including implicit bit) there are in a Perl NV.
+ * This depends on which floating point type was chosen.
+ */
+#define DOUBLEMANTBITS 52
+#define LONGDBLMANTBITS 64
+#define NVMANTBITS 52
/* NEED_VA_COPY:
* This symbol, if defined, indicates that the system stores
*/
/* NVSIZE:
* This symbol contains the sizeof(NV).
+ * Note that some floating point formats have unused bytes.
+ * The most notable example is the x86* 80-bit extended precision
+ * which comes in byte sizes of 12 and 16 (for 32 and 64 bit
+ * platforms, respectively), but which only uses 10 bytes.
+ * Perl compiled with -Duselongdouble on x86* is like this.
*/
/* NV_PRESERVES_UV:
* This symbol, if defined, indicates that a variable of type NVTYPE
* is either n or 32*ceil(n/32), especially many little-endians do
* the latter. This is only useful if you have select(), naturally.
*/
-#define SELECT_MIN_BITS 32 /**/
+#define SELECT_MIN_BITS 32 /**/
+
+/* ST_INO_SIZE:
+ * This variable contains the size of struct stat's st_ino in bytes.
+ */
+/* ST_INO_SIGN:
+ * This symbol holds the signedness of struct stat's st_ino.
+ * 1 for unsigned, -1 for signed.
+ */
+#define ST_INO_SIGN 1 /* st_ino sign */
+#define ST_INO_SIZE 4 /* st_ino size */
+
+/* STARTPERL:
+ * This variable contains the string to put in front of a perl
+ * script to make sure (one hopes) that it runs with perl and not
+ * some shell.
+ */
+#define STARTPERL "#!perl" /**/
+
+/* HAS_STDIO_STREAM_ARRAY:
+ * This symbol, if defined, tells that there is an array
+ * holding the stdio streams.
+ */
+/* STDIO_STREAM_ARRAY:
+ * This symbol tells the name of the array holding the stdio streams.
+ * Usual values include _iob, __iob, and __sF.
+ */
+/*#define HAS_STDIO_STREAM_ARRAY / **/
+#ifdef HAS_STDIO_STREAM_ARRAY
+#define STDIO_STREAM_ARRAY
+#endif
+
+/* GMTIME_MAX:
+ * This symbol contains the maximum value for the time_t offset that
+ * the system function gmtime () accepts, and defaults to 0
+ */
+/* GMTIME_MIN:
+ * This symbol contains the minimum value for the time_t offset that
+ * the system function gmtime () accepts, and defaults to 0
+ */
+/* LOCALTIME_MAX:
+ * This symbol contains the maximum value for the time_t offset that
+ * the system function localtime () accepts, and defaults to 0
+ */
+/* LOCALTIME_MIN:
+ * This symbol contains the minimum value for the time_t offset that
+ * the system function localtime () accepts, and defaults to 0
+ */
+#define GMTIME_MAX 2147483647 /**/
+#define GMTIME_MIN 0 /**/
+#define LOCALTIME_MAX 2147483647 /**/
+#define LOCALTIME_MIN 0 /**/
+
+/* USE_64_BIT_INT:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be employed (be they 32 or 64 bits). The minimal possible
+ * 64-bitness is used, just enough to get 64-bit integers into Perl.
+ * This may mean using for example "long longs", while your memory
+ * may still be limited to 2 gigabytes.
+ */
+/* USE_64_BIT_ALL:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be used (be they 32 or 64 bits). The maximal possible
+ * 64-bitness is employed: LP64 or ILP64, meaning that you will
+ * be able to use more than 2 gigabytes of memory. This mode is
+ * even more binary incompatible than USE_64_BIT_INT. You may not
+ * be able to run the resulting executable in a 32-bit CPU at all or
+ * you may need at least to reboot your OS to 64-bit mode.
+ */
+#ifndef USE_64_BIT_INT
+/*#define USE_64_BIT_INT / **/
+#endif
+#ifndef USE_64_BIT_ALL
+/*#define USE_64_BIT_ALL / **/
+#endif
+
+/* USE_CBACKTRACE:
+ * This symbol, if defined, indicates that Perl should
+ * be built with support for backtrace.
+ */
+/*#define USE_CBACKTRACE / **/
+
+/* USE_DTRACE:
+ * This symbol, if defined, indicates that Perl should
+ * be built with support for DTrace.
+ */
+/*#define USE_DTRACE / **/
+
+/* USE_FAST_STDIO:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use 'fast stdio'.
+ * Defaults to define in Perls 5.8 and earlier, to undef later.
+ */
+#ifndef USE_FAST_STDIO
+/*#define USE_FAST_STDIO / **/
+#endif
+
+/* USE_KERN_PROC_PATHNAME:
+ * This symbol, if defined, indicates that we can use sysctl with
+ * KERN_PROC_PATHNAME to get a full path for the executable, and hence
+ * convert $^X to an absolute path.
+ */
+/*#define USE_KERN_PROC_PATHNAME / **/
+
+/* USE_LARGE_FILES:
+ * This symbol, if defined, indicates that large file support
+ * should be used when available.
+ */
+#ifndef USE_LARGE_FILES
+/*#define USE_LARGE_FILES / **/
+#endif
+
+/* USE_LONG_DOUBLE:
+ * This symbol, if defined, indicates that long doubles should
+ * be used when available.
+ */
+#ifndef USE_LONG_DOUBLE
+/*#define USE_LONG_DOUBLE / **/
+#endif
+
+/* USE_MORE_BITS:
+ * This symbol, if defined, indicates that 64-bit interfaces and
+ * long doubles should be used when available.
+ */
+#ifndef USE_MORE_BITS
+/*#define USE_MORE_BITS / **/
+#endif
+
+/* MULTIPLICITY:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use multiplicity.
+ */
+#ifndef MULTIPLICITY
+/*#define MULTIPLICITY / **/
+#endif
+
+/* USE_NSGETEXECUTABLEPATH:
+ * This symbol, if defined, indicates that we can use _NSGetExecutablePath
+ * and realpath to get a full path for the executable, and hence convert
+ * $^X to an absolute path.
+ */
+/*#define USE_NSGETEXECUTABLEPATH / **/
+
+/* USE_PERLIO:
+ * This symbol, if defined, indicates that the PerlIO abstraction should
+ * be used throughout. If not defined, stdio should be
+ * used in a fully backward compatible manner.
+ */
+#ifndef USE_PERLIO
+#define USE_PERLIO /**/
+#endif
+
+/* USE_QUADMATH:
+ * This symbol, if defined, indicates that the quadmath library should
+ * be used when available.
+ */
+#ifndef USE_QUADMATH
+/*#define USE_QUADMATH / **/
+#endif
+
+/* USE_SOCKS:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use socks.
+ */
+#ifndef USE_SOCKS
+/*#define USE_SOCKS / **/
+#endif
+
+/* HAS_DRAND48_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the drand48() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern double drand48(void);
+ */
+/*#define HAS_DRAND48_PROTO / **/
+
+/* HAS_GETHOST_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for gethostent(), gethostbyname(), and
+ * gethostbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define HAS_GETHOST_PROTOS /**/
+
+/* HAS_GETNET_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getnetent(), getnetbyname(), and
+ * getnetbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+/*#define HAS_GETNET_PROTOS / **/
+
+/* HAS_GETPROTO_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getprotoent(), getprotobyname(), and
+ * getprotobyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define HAS_GETPROTO_PROTOS /**/
+
+/* HAS_GETSERV_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getservent(), getservbyname(), and
+ * getservbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define HAS_GETSERV_PROTOS /**/
+
+/* HAS_LSEEK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the lseek() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern off_t lseek(int, off_t, int);
+ */
+#define HAS_LSEEK_PROTO /**/
+
+/* Netdb_host_t:
+ * This symbol holds the type used for the 1st argument
+ * to gethostbyaddr().
+ */
+/* Netdb_hlen_t:
+ * This symbol holds the type used for the 2nd argument
+ * to gethostbyaddr().
+ */
+/* Netdb_name_t:
+ * This symbol holds the type used for the argument to
+ * gethostbyname().
+ */
+/* Netdb_net_t:
+ * This symbol holds the type used for the 1st argument to
+ * getnetbyaddr().
+ */
+#define Netdb_host_t char * /**/
+#define Netdb_hlen_t int /**/
+#define Netdb_name_t char * /**/
+#define Netdb_net_t long /**/
+
+/* Select_fd_set_t:
+ * This symbol holds the type used for the 2nd, 3rd, and 4th
+ * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
+ * is defined, and 'int *' otherwise. This is only useful if you
+ * have select(), of course.
+ */
+#define Select_fd_set_t Perl_fd_set * /**/
+
+/* Sock_size_t:
+ * This symbol holds the type used for the size argument of
+ * various socket calls (just the base type, not the pointer-to).
+ */
+#define Sock_size_t int /**/
+
+/* ARCHNAME:
+ * This symbol holds a string representing the architecture name.
+ * It may be used to construct an architecture-dependant pathname
+ * where library files may be held under a private library, for
+ * instance.
+ */
+#define ARCHNAME "MSWin32-x86-perlio" /**/
+
+/* HAS_ASCTIME_R:
+ * This symbol, if defined, indicates that the asctime_r routine
+ * is available to asctime re-entrantly.
+ */
+/* ASCTIME_R_PROTO:
+ * This symbol encodes the prototype of asctime_r.
+ * It is zero if d_asctime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r
+ * is defined.
+ */
+/*#define HAS_ASCTIME_R / **/
+#define ASCTIME_R_PROTO 0 /**/
+
+/* HAS_CRYPT_R:
+ * This symbol, if defined, indicates that the crypt_r routine
+ * is available to crypt re-entrantly.
+ */
+/* CRYPT_R_PROTO:
+ * This symbol encodes the prototype of crypt_r.
+ * It is zero if d_crypt_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r
+ * is defined.
+ */
+/*#define HAS_CRYPT_R / **/
+#define CRYPT_R_PROTO 0 /**/
+
+/* HAS_CTERMID_R:
+ * This symbol, if defined, indicates that the ctermid_r routine
+ * is available to ctermid re-entrantly.
+ */
+/* CTERMID_R_PROTO:
+ * This symbol encodes the prototype of ctermid_r.
+ * It is zero if d_ctermid_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctermid_r
+ * is defined.
+ */
+/*#define HAS_CTERMID_R / **/
+#define CTERMID_R_PROTO 0 /**/
+
+/* HAS_CTIME_R:
+ * This symbol, if defined, indicates that the ctime_r routine
+ * is available to ctime re-entrantly.
+ */
+/* CTIME_R_PROTO:
+ * This symbol encodes the prototype of ctime_r.
+ * It is zero if d_ctime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r
+ * is defined.
+ */
+/*#define HAS_CTIME_R / **/
+#define CTIME_R_PROTO 0 /**/
+
+/* HAS_DRAND48_R:
+ * This symbol, if defined, indicates that the drand48_r routine
+ * is available to drand48 re-entrantly.
+ */
+/* DRAND48_R_PROTO:
+ * This symbol encodes the prototype of drand48_r.
+ * It is zero if d_drand48_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r
+ * is defined.
+ */
+/*#define HAS_DRAND48_R / **/
+#define DRAND48_R_PROTO 0 /**/
+
+/* HAS_ENDGRENT_R:
+ * This symbol, if defined, indicates that the endgrent_r routine
+ * is available to endgrent re-entrantly.
+ */
+/* ENDGRENT_R_PROTO:
+ * This symbol encodes the prototype of endgrent_r.
+ * It is zero if d_endgrent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r
+ * is defined.
+ */
+/*#define HAS_ENDGRENT_R / **/
+#define ENDGRENT_R_PROTO 0 /**/
+
+/* HAS_ENDHOSTENT_R:
+ * This symbol, if defined, indicates that the endhostent_r routine
+ * is available to endhostent re-entrantly.
+ */
+/* ENDHOSTENT_R_PROTO:
+ * This symbol encodes the prototype of endhostent_r.
+ * It is zero if d_endhostent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endhostent_r
+ * is defined.
+ */
+/*#define HAS_ENDHOSTENT_R / **/
+#define ENDHOSTENT_R_PROTO 0 /**/
+
+/* HAS_ENDNETENT_R:
+ * This symbol, if defined, indicates that the endnetent_r routine
+ * is available to endnetent re-entrantly.
+ */
+/* ENDNETENT_R_PROTO:
+ * This symbol encodes the prototype of endnetent_r.
+ * It is zero if d_endnetent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endnetent_r
+ * is defined.
+ */
+/*#define HAS_ENDNETENT_R / **/
+#define ENDNETENT_R_PROTO 0 /**/
+
+/* HAS_ENDPROTOENT_R:
+ * This symbol, if defined, indicates that the endprotoent_r routine
+ * is available to endprotoent re-entrantly.
+ */
+/* ENDPROTOENT_R_PROTO:
+ * This symbol encodes the prototype of endprotoent_r.
+ * It is zero if d_endprotoent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endprotoent_r
+ * is defined.
+ */
+/*#define HAS_ENDPROTOENT_R / **/
+#define ENDPROTOENT_R_PROTO 0 /**/
+
+/* HAS_ENDPWENT_R:
+ * This symbol, if defined, indicates that the endpwent_r routine
+ * is available to endpwent re-entrantly.
+ */
+/* ENDPWENT_R_PROTO:
+ * This symbol encodes the prototype of endpwent_r.
+ * It is zero if d_endpwent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r
+ * is defined.
+ */
+/*#define HAS_ENDPWENT_R / **/
+#define ENDPWENT_R_PROTO 0 /**/
+
+/* HAS_ENDSERVENT_R:
+ * This symbol, if defined, indicates that the endservent_r routine
+ * is available to endservent re-entrantly.
+ */
+/* ENDSERVENT_R_PROTO:
+ * This symbol encodes the prototype of endservent_r.
+ * It is zero if d_endservent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endservent_r
+ * is defined.
+ */
+/*#define HAS_ENDSERVENT_R / **/
+#define ENDSERVENT_R_PROTO 0 /**/
+
+/* HAS_GETGRENT_R:
+ * This symbol, if defined, indicates that the getgrent_r routine
+ * is available to getgrent re-entrantly.
+ */
+/* GETGRENT_R_PROTO:
+ * This symbol encodes the prototype of getgrent_r.
+ * It is zero if d_getgrent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r
+ * is defined.
+ */
+/*#define HAS_GETGRENT_R / **/
+#define GETGRENT_R_PROTO 0 /**/
+
+/* HAS_GETGRGID_R:
+ * This symbol, if defined, indicates that the getgrgid_r routine
+ * is available to getgrgid re-entrantly.
+ */
+/* GETGRGID_R_PROTO:
+ * This symbol encodes the prototype of getgrgid_r.
+ * It is zero if d_getgrgid_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r
+ * is defined.
+ */
+/*#define HAS_GETGRGID_R / **/
+#define GETGRGID_R_PROTO 0 /**/
+
+/* HAS_GETGRNAM_R:
+ * This symbol, if defined, indicates that the getgrnam_r routine
+ * is available to getgrnam re-entrantly.
+ */
+/* GETGRNAM_R_PROTO:
+ * This symbol encodes the prototype of getgrnam_r.
+ * It is zero if d_getgrnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r
+ * is defined.
+ */
+/*#define HAS_GETGRNAM_R / **/
+#define GETGRNAM_R_PROTO 0 /**/
+
+/* HAS_GETHOSTBYADDR_R:
+ * This symbol, if defined, indicates that the gethostbyaddr_r routine
+ * is available to gethostbyaddr re-entrantly.
+ */
+/* GETHOSTBYADDR_R_PROTO:
+ * This symbol encodes the prototype of gethostbyaddr_r.
+ * It is zero if d_gethostbyaddr_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyaddr_r
+ * is defined.
+ */
+/*#define HAS_GETHOSTBYADDR_R / **/
+#define GETHOSTBYADDR_R_PROTO 0 /**/
+
+/* HAS_GETHOSTBYNAME_R:
+ * This symbol, if defined, indicates that the gethostbyname_r routine
+ * is available to gethostbyname re-entrantly.
+ */
+/* GETHOSTBYNAME_R_PROTO:
+ * This symbol encodes the prototype of gethostbyname_r.
+ * It is zero if d_gethostbyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyname_r
+ * is defined.
+ */
+/*#define HAS_GETHOSTBYNAME_R / **/
+#define GETHOSTBYNAME_R_PROTO 0 /**/
+
+/* HAS_GETHOSTENT_R:
+ * This symbol, if defined, indicates that the gethostent_r routine
+ * is available to gethostent re-entrantly.
+ */
+/* GETHOSTENT_R_PROTO:
+ * This symbol encodes the prototype of gethostent_r.
+ * It is zero if d_gethostent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostent_r
+ * is defined.
+ */
+/*#define HAS_GETHOSTENT_R / **/
+#define GETHOSTENT_R_PROTO 0 /**/
+
+/* HAS_GETLOGIN_R:
+ * This symbol, if defined, indicates that the getlogin_r routine
+ * is available to getlogin re-entrantly.
+ */
+/* GETLOGIN_R_PROTO:
+ * This symbol encodes the prototype of getlogin_r.
+ * It is zero if d_getlogin_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r
+ * is defined.
+ */
+/*#define HAS_GETLOGIN_R / **/
+#define GETLOGIN_R_PROTO 0 /**/
+
+/* HAS_GETNETBYADDR_R:
+ * This symbol, if defined, indicates that the getnetbyaddr_r routine
+ * is available to getnetbyaddr re-entrantly.
+ */
+/* GETNETBYADDR_R_PROTO:
+ * This symbol encodes the prototype of getnetbyaddr_r.
+ * It is zero if d_getnetbyaddr_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyaddr_r
+ * is defined.
+ */
+/*#define HAS_GETNETBYADDR_R / **/
+#define GETNETBYADDR_R_PROTO 0 /**/
+
+/* HAS_GETNETBYNAME_R:
+ * This symbol, if defined, indicates that the getnetbyname_r routine
+ * is available to getnetbyname re-entrantly.
+ */
+/* GETNETBYNAME_R_PROTO:
+ * This symbol encodes the prototype of getnetbyname_r.
+ * It is zero if d_getnetbyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyname_r
+ * is defined.
+ */
+/*#define HAS_GETNETBYNAME_R / **/
+#define GETNETBYNAME_R_PROTO 0 /**/
+
+/* HAS_GETNETENT_R:
+ * This symbol, if defined, indicates that the getnetent_r routine
+ * is available to getnetent re-entrantly.
+ */
+/* GETNETENT_R_PROTO:
+ * This symbol encodes the prototype of getnetent_r.
+ * It is zero if d_getnetent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetent_r
+ * is defined.
+ */
+/*#define HAS_GETNETENT_R / **/
+#define GETNETENT_R_PROTO 0 /**/
+
+/* HAS_GETPROTOBYNAME_R:
+ * This symbol, if defined, indicates that the getprotobyname_r routine
+ * is available to getprotobyname re-entrantly.
+ */
+/* GETPROTOBYNAME_R_PROTO:
+ * This symbol encodes the prototype of getprotobyname_r.
+ * It is zero if d_getprotobyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobyname_r
+ * is defined.
+ */
+/*#define HAS_GETPROTOBYNAME_R / **/
+#define GETPROTOBYNAME_R_PROTO 0 /**/
+
+/* HAS_GETPROTOBYNUMBER_R:
+ * This symbol, if defined, indicates that the getprotobynumber_r routine
+ * is available to getprotobynumber re-entrantly.
+ */
+/* GETPROTOBYNUMBER_R_PROTO:
+ * This symbol encodes the prototype of getprotobynumber_r.
+ * It is zero if d_getprotobynumber_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobynumber_r
+ * is defined.
+ */
+/*#define HAS_GETPROTOBYNUMBER_R / **/
+#define GETPROTOBYNUMBER_R_PROTO 0 /**/
+
+/* HAS_GETPROTOENT_R:
+ * This symbol, if defined, indicates that the getprotoent_r routine
+ * is available to getprotoent re-entrantly.
+ */
+/* GETPROTOENT_R_PROTO:
+ * This symbol encodes the prototype of getprotoent_r.
+ * It is zero if d_getprotoent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotoent_r
+ * is defined.
+ */
+/*#define HAS_GETPROTOENT_R / **/
+#define GETPROTOENT_R_PROTO 0 /**/
+
+/* HAS_GETPWENT_R:
+ * This symbol, if defined, indicates that the getpwent_r routine
+ * is available to getpwent re-entrantly.
+ */
+/* GETPWENT_R_PROTO:
+ * This symbol encodes the prototype of getpwent_r.
+ * It is zero if d_getpwent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r
+ * is defined.
+ */
+/*#define HAS_GETPWENT_R / **/
+#define GETPWENT_R_PROTO 0 /**/
+
+/* HAS_GETPWNAM_R:
+ * This symbol, if defined, indicates that the getpwnam_r routine
+ * is available to getpwnam re-entrantly.
+ */
+/* GETPWNAM_R_PROTO:
+ * This symbol encodes the prototype of getpwnam_r.
+ * It is zero if d_getpwnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r
+ * is defined.
+ */
+/*#define HAS_GETPWNAM_R / **/
+#define GETPWNAM_R_PROTO 0 /**/
+
+/* HAS_GETPWUID_R:
+ * This symbol, if defined, indicates that the getpwuid_r routine
+ * is available to getpwuid re-entrantly.
+ */
+/* GETPWUID_R_PROTO:
+ * This symbol encodes the prototype of getpwuid_r.
+ * It is zero if d_getpwuid_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r
+ * is defined.
+ */
+/*#define HAS_GETPWUID_R / **/
+#define GETPWUID_R_PROTO 0 /**/
+
+/* HAS_GETSERVBYNAME_R:
+ * This symbol, if defined, indicates that the getservbyname_r routine
+ * is available to getservbyname re-entrantly.
+ */
+/* GETSERVBYNAME_R_PROTO:
+ * This symbol encodes the prototype of getservbyname_r.
+ * It is zero if d_getservbyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyname_r
+ * is defined.
+ */
+/*#define HAS_GETSERVBYNAME_R / **/
+#define GETSERVBYNAME_R_PROTO 0 /**/
+
+/* HAS_GETSERVBYPORT_R:
+ * This symbol, if defined, indicates that the getservbyport_r routine
+ * is available to getservbyport re-entrantly.
+ */
+/* GETSERVBYPORT_R_PROTO:
+ * This symbol encodes the prototype of getservbyport_r.
+ * It is zero if d_getservbyport_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyport_r
+ * is defined.
+ */
+/*#define HAS_GETSERVBYPORT_R / **/
+#define GETSERVBYPORT_R_PROTO 0 /**/
+
+/* HAS_GETSERVENT_R:
+ * This symbol, if defined, indicates that the getservent_r routine
+ * is available to getservent re-entrantly.
+ */
+/* GETSERVENT_R_PROTO:
+ * This symbol encodes the prototype of getservent_r.
+ * It is zero if d_getservent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r
+ * is defined.
+ */
+/*#define HAS_GETSERVENT_R / **/
+#define GETSERVENT_R_PROTO 0 /**/
+
+/* HAS_GETSPNAM_R:
+ * This symbol, if defined, indicates that the getspnam_r routine
+ * is available to getspnam re-entrantly.
+ */
+/* GETSPNAM_R_PROTO:
+ * This symbol encodes the prototype of getspnam_r.
+ * It is zero if d_getspnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r
+ * is defined.
+ */
+/*#define HAS_GETSPNAM_R / **/
+#define GETSPNAM_R_PROTO 0 /**/
+
+/* HAS_GMTIME_R:
+ * This symbol, if defined, indicates that the gmtime_r routine
+ * is available to gmtime re-entrantly.
+ */
+/* GMTIME_R_PROTO:
+ * This symbol encodes the prototype of gmtime_r.
+ * It is zero if d_gmtime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r
+ * is defined.
+ */
+/*#define HAS_GMTIME_R / **/
+#define GMTIME_R_PROTO 0 /**/
+
+/* HAS_LOCALTIME_R:
+ * This symbol, if defined, indicates that the localtime_r routine
+ * is available to localtime re-entrantly.
+ */
+/* LOCALTIME_R_NEEDS_TZSET:
+ * Many libc's localtime_r implementations do not call tzset,
+ * making them differ from localtime(), and making timezone
+ * changes using \undef{TZ} without explicitly calling tzset
+ * impossible. This symbol makes us call tzset before localtime_r
+ */
+/*#define LOCALTIME_R_NEEDS_TZSET / **/
+#ifdef LOCALTIME_R_NEEDS_TZSET
+#define L_R_TZSET tzset(),
+#else
+#define L_R_TZSET
+#endif
+
+/* LOCALTIME_R_PROTO:
+ * This symbol encodes the prototype of localtime_r.
+ * It is zero if d_localtime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r
+ * is defined.
+ */
+/*#define HAS_LOCALTIME_R / **/
+#define LOCALTIME_R_PROTO 0 /**/
+
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ * This symbol, if defined, indicates how to create pthread
+ * in joinable (aka undetached) state. NOTE: not defined
+ * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ * (the new version of the constant).
+ * If defined, known values are PTHREAD_CREATE_UNDETACHED
+ * and __UNDETACHED.
+ */
+/*#define OLD_PTHREAD_CREATE_JOINABLE / **/
+
+/* HAS_PTHREAD_ATFORK:
+ * This symbol, if defined, indicates that the pthread_atfork routine
+ * is available to setup fork handlers.
+ */
+/*#define HAS_PTHREAD_ATFORK / **/
+
+/* HAS_PTHREAD_YIELD:
+ * This symbol, if defined, indicates that the pthread_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+/* SCHED_YIELD:
+ * This symbol defines the way to yield the execution of
+ * the current thread. Known ways are sched_yield,
+ * pthread_yield, and pthread_yield with NULL.
+ */
+/* HAS_SCHED_YIELD:
+ * This symbol, if defined, indicates that the sched_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+/*#define HAS_PTHREAD_YIELD / **/
+#define SCHED_YIELD /**/
+/*#define HAS_SCHED_YIELD / **/
+
+/* HAS_RANDOM_R:
+ * This symbol, if defined, indicates that the random_r routine
+ * is available to random re-entrantly.
+ */
+/* RANDOM_R_PROTO:
+ * This symbol encodes the prototype of random_r.
+ * It is zero if d_random_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r
+ * is defined.
+ */
+/*#define HAS_RANDOM_R / **/
+#define RANDOM_R_PROTO 0 /**/
+
+/* HAS_READDIR64_R:
+ * This symbol, if defined, indicates that the readdir64_r routine
+ * is available to readdir64 re-entrantly.
+ */
+/* READDIR64_R_PROTO:
+ * This symbol encodes the prototype of readdir64_r.
+ * It is zero if d_readdir64_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir64_r
+ * is defined.
+ */
+/*#define HAS_READDIR64_R / **/
+#define READDIR64_R_PROTO 0 /**/
+
+/* HAS_READDIR_R:
+ * This symbol, if defined, indicates that the readdir_r routine
+ * is available to readdir re-entrantly.
+ */
+/* READDIR_R_PROTO:
+ * This symbol encodes the prototype of readdir_r.
+ * It is zero if d_readdir_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r
+ * is defined.
+ */
+/*#define HAS_READDIR_R / **/
+#define READDIR_R_PROTO 0 /**/
+
+/* HAS_SETGRENT_R:
+ * This symbol, if defined, indicates that the setgrent_r routine
+ * is available to setgrent re-entrantly.
+ */
+/* SETGRENT_R_PROTO:
+ * This symbol encodes the prototype of setgrent_r.
+ * It is zero if d_setgrent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r
+ * is defined.
+ */
+/*#define HAS_SETGRENT_R / **/
+#define SETGRENT_R_PROTO 0 /**/
+
+/* HAS_SETHOSTENT_R:
+ * This symbol, if defined, indicates that the sethostent_r routine
+ * is available to sethostent re-entrantly.
+ */
+/* SETHOSTENT_R_PROTO:
+ * This symbol encodes the prototype of sethostent_r.
+ * It is zero if d_sethostent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_sethostent_r
+ * is defined.
+ */
+/*#define HAS_SETHOSTENT_R / **/
+#define SETHOSTENT_R_PROTO 0 /**/
+
+/* HAS_SETLOCALE_R:
+ * This symbol, if defined, indicates that the setlocale_r routine
+ * is available to setlocale re-entrantly.
+ */
+/* SETLOCALE_R_PROTO:
+ * This symbol encodes the prototype of setlocale_r.
+ * It is zero if d_setlocale_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setlocale_r
+ * is defined.
+ */
+/*#define HAS_SETLOCALE_R / **/
+#define SETLOCALE_R_PROTO 0 /**/
+
+/* HAS_SETNETENT_R:
+ * This symbol, if defined, indicates that the setnetent_r routine
+ * is available to setnetent re-entrantly.
+ */
+/* SETNETENT_R_PROTO:
+ * This symbol encodes the prototype of setnetent_r.
+ * It is zero if d_setnetent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setnetent_r
+ * is defined.
+ */
+/*#define HAS_SETNETENT_R / **/
+#define SETNETENT_R_PROTO 0 /**/
+
+/* HAS_SETPROTOENT_R:
+ * This symbol, if defined, indicates that the setprotoent_r routine
+ * is available to setprotoent re-entrantly.
+ */
+/* SETPROTOENT_R_PROTO:
+ * This symbol encodes the prototype of setprotoent_r.
+ * It is zero if d_setprotoent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setprotoent_r
+ * is defined.
+ */
+/*#define HAS_SETPROTOENT_R / **/
+#define SETPROTOENT_R_PROTO 0 /**/
+
+/* HAS_SETPWENT_R:
+ * This symbol, if defined, indicates that the setpwent_r routine
+ * is available to setpwent re-entrantly.
+ */
+/* SETPWENT_R_PROTO:
+ * This symbol encodes the prototype of setpwent_r.
+ * It is zero if d_setpwent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r
+ * is defined.
+ */
+/*#define HAS_SETPWENT_R / **/
+#define SETPWENT_R_PROTO 0 /**/
+
+/* HAS_SETSERVENT_R:
+ * This symbol, if defined, indicates that the setservent_r routine
+ * is available to setservent re-entrantly.
+ */
+/* SETSERVENT_R_PROTO:
+ * This symbol encodes the prototype of setservent_r.
+ * It is zero if d_setservent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setservent_r
+ * is defined.
+ */
+/*#define HAS_SETSERVENT_R / **/
+#define SETSERVENT_R_PROTO 0 /**/
+
+/* HAS_SRAND48_R:
+ * This symbol, if defined, indicates that the srand48_r routine
+ * is available to srand48 re-entrantly.
+ */
+/* SRAND48_R_PROTO:
+ * This symbol encodes the prototype of srand48_r.
+ * It is zero if d_srand48_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srand48_r
+ * is defined.
+ */
+/*#define HAS_SRAND48_R / **/
+#define SRAND48_R_PROTO 0 /**/
+
+/* HAS_SRANDOM_R:
+ * This symbol, if defined, indicates that the srandom_r routine
+ * is available to srandom re-entrantly.
+ */
+/* SRANDOM_R_PROTO:
+ * This symbol encodes the prototype of srandom_r.
+ * It is zero if d_srandom_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srandom_r
+ * is defined.
+ */
+/*#define HAS_SRANDOM_R / **/
+#define SRANDOM_R_PROTO 0 /**/
+
+/* HAS_STRERROR_R:
+ * This symbol, if defined, indicates that the strerror_r routine
+ * is available to strerror re-entrantly.
+ */
+/* STRERROR_R_PROTO:
+ * This symbol encodes the prototype of strerror_r.
+ * It is zero if d_strerror_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r
+ * is defined.
+ */
+/*#define HAS_STRERROR_R / **/
+#define STRERROR_R_PROTO 0 /**/
+
+/* HAS_TMPNAM_R:
+ * This symbol, if defined, indicates that the tmpnam_r routine
+ * is available to tmpnam re-entrantly.
+ */
+/* TMPNAM_R_PROTO:
+ * This symbol encodes the prototype of tmpnam_r.
+ * It is zero if d_tmpnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r
+ * is defined.
+ */
+/*#define HAS_TMPNAM_R / **/
+#define TMPNAM_R_PROTO 0 /**/
-/* ST_INO_SIZE:
- * This variable contains the size of struct stat's st_ino in bytes.
+/* HAS_TTYNAME_R:
+ * This symbol, if defined, indicates that the ttyname_r routine
+ * is available to ttyname re-entrantly.
*/
-/* ST_INO_SIGN:
- * This symbol holds the signedness of struct stat's st_ino.
- * 1 for unsigned, -1 for signed.
+/* TTYNAME_R_PROTO:
+ * This symbol encodes the prototype of ttyname_r.
+ * It is zero if d_ttyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ttyname_r
+ * is defined.
*/
-#define ST_INO_SIGN 1 /* st_ino sign */
-#define ST_INO_SIZE 4 /* st_ino size */
+/*#define HAS_TTYNAME_R / **/
+#define TTYNAME_R_PROTO 0 /**/
-/* STARTPERL:
- * This variable contains the string to put in front of a perl
- * script to make sure (one hopes) that it runs with perl and not
- * some shell.
+/* I_MACH_CTHREADS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <mach/cthreads.h>.
*/
-#define STARTPERL "#!perl" /**/
+/*#define I_MACH_CTHREADS / **/
-/* HAS_STDIO_STREAM_ARRAY:
- * This symbol, if defined, tells that there is an array
- * holding the stdio streams.
+/* I_PTHREAD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pthread.h>.
*/
-/* STDIO_STREAM_ARRAY:
- * This symbol tells the name of the array holding the stdio streams.
- * Usual values include _iob, __iob, and __sF.
+/*#define I_PTHREAD / **/
+
+/* USE_ITHREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the interpreter-based threading implementation.
*/
-/*#define HAS_STDIO_STREAM_ARRAY / **/
-#ifdef HAS_STDIO_STREAM_ARRAY
-#define STDIO_STREAM_ARRAY
+/* USE_5005THREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the 5.005-based threading implementation.
+ * Only valid up to 5.8.x.
+ */
+/* OLD_PTHREADS_API:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use the old draft POSIX threads API.
+ */
+/* USE_REENTRANT_API:
+ * This symbol, if defined, indicates that Perl should
+ * try to use the various _r versions of library functions.
+ * This is extremely experimental.
+ */
+/*#define USE_5005THREADS / **/
+/*#define USE_ITHREADS / **/
+#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
+#define USE_THREADS /* until src is revised*/
#endif
+/*#define OLD_PTHREADS_API / **/
+/*#define USE_REENTRANT_API / **/
-/* GMTIME_MAX:
- * This symbol contains the maximum value for the time_t offset that
- * the system function gmtime () accepts, and defaults to 0
+/* HAS_TIME:
+ * This symbol, if defined, indicates that the time() routine exists.
*/
-/* GMTIME_MIN:
- * This symbol contains the minimum value for the time_t offset that
- * the system function gmtime () accepts, and defaults to 0
+/* Time_t:
+ * This symbol holds the type returned by time(). It can be long,
+ * or time_t on BSD sites (in which case <sys/types.h> should be
+ * included).
*/
-/* LOCALTIME_MAX:
- * This symbol contains the maximum value for the time_t offset that
- * the system function localtime () accepts, and defaults to 0
+#define HAS_TIME /**/
+#define Time_t time_t /* Time type */
+
+/* HAS_TIMES:
+ * This symbol, if defined, indicates that the times() routine exists.
+ * Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
*/
-/* LOCALTIME_MIN:
- * This symbol contains the minimum value for the time_t offset that
- * the system function localtime () accepts, and defaults to 0
+#define HAS_TIMES /**/
+
+/* Fpos_t:
+ * This symbol holds the type used to declare file positions in libc.
+ * It can be fpos_t, long, uint, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#define GMTIME_MAX 2147483647 /**/
-#define GMTIME_MIN 0 /**/
-#define LOCALTIME_MAX 2147483647 /**/
-#define LOCALTIME_MIN 0 /**/
+#define Fpos_t fpos_t /* File position type */
-/* USE_64_BIT_INT:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be employed (be they 32 or 64 bits). The minimal possible
- * 64-bitness is used, just enough to get 64-bit integers into Perl.
- * This may mean using for example "long longs", while your memory
- * may still be limited to 2 gigabytes.
+/* Gid_t_f:
+ * This symbol defines the format string used for printing a Gid_t.
*/
-/* USE_64_BIT_ALL:
- * This symbol, if defined, indicates that 64-bit integers should
- * be used when available. If not defined, the native integers
- * will be used (be they 32 or 64 bits). The maximal possible
- * 64-bitness is employed: LP64 or ILP64, meaning that you will
- * be able to use more than 2 gigabytes of memory. This mode is
- * even more binary incompatible than USE_64_BIT_INT. You may not
- * be able to run the resulting executable in a 32-bit CPU at all or
- * you may need at least to reboot your OS to 64-bit mode.
+#define Gid_t_f "ld" /**/
+
+/* Gid_t_sign:
+ * This symbol holds the signedness of a Gid_t.
+ * 1 for unsigned, -1 for signed.
*/
-#ifndef USE_64_BIT_INT
-/*#define USE_64_BIT_INT / **/
-#endif
-#ifndef USE_64_BIT_ALL
-/*#define USE_64_BIT_ALL / **/
-#endif
+#define Gid_t_sign -1 /* GID sign */
-/* USE_CBACKTRACE:
- * This symbol, if defined, indicates that Perl should
- * be built with support for backtrace.
+/* Gid_t_size:
+ * This symbol holds the size of a Gid_t in bytes.
*/
-/*#define USE_CBACKTRACE / **/
+#define Gid_t_size 4 /* GID size */
-/* USE_DTRACE:
- * This symbol, if defined, indicates that Perl should
- * be built with support for DTrace.
+/* Gid_t:
+ * This symbol holds the return type of getgid() and the type of
+ * argument to setrgid() and related functions. Typically,
+ * it is the type of group ids in the kernel. It can be int, ushort,
+ * gid_t, etc... It may be necessary to include <sys/types.h> to get
+ * any typedef'ed information.
*/
-/*#define USE_DTRACE / **/
+#define Gid_t gid_t /* Type for getgid(), etc... */
-/* USE_FAST_STDIO:
- * This symbol, if defined, indicates that Perl should
- * be built to use 'fast stdio'.
- * Defaults to define in Perls 5.8 and earlier, to undef later.
+/* Off_t:
+ * This symbol holds the type used to declare offsets in the kernel.
+ * It can be int, long, off_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#ifndef USE_FAST_STDIO
-/*#define USE_FAST_STDIO / **/
-#endif
+/* LSEEKSIZE:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
+/* Off_t_size:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
+#define Off_t long /* <offset> type */
+#define LSEEKSIZE 4 /* <offset> size */
+#define Off_t_size 4 /* <offset> size */
-/* USE_KERN_PROC_PATHNAME:
- * This symbol, if defined, indicates that we can use sysctl with
- * KERN_PROC_PATHNAME to get a full path for the executable, and hence
- * convert $^X to an absolute path.
+/* Mode_t:
+ * This symbol holds the type used to declare file modes
+ * for systems calls. It is usually mode_t, but may be
+ * int or unsigned short. It may be necessary to include <sys/types.h>
+ * to get any typedef'ed information.
*/
-/*#define USE_KERN_PROC_PATHNAME / **/
+#define Mode_t mode_t /* file mode parameter for system calls */
-/* USE_LARGE_FILES:
- * This symbol, if defined, indicates that large file support
- * should be used when available.
+/* Pid_t:
+ * This symbol holds the type used to declare process ids in the kernel.
+ * It can be int, uint, pid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#ifndef USE_LARGE_FILES
-/*#define USE_LARGE_FILES / **/
-#endif
+#define Pid_t int /* PID type */
-/* USE_LONG_DOUBLE:
- * This symbol, if defined, indicates that long doubles should
- * be used when available.
+/* Size_t_size:
+ * This symbol holds the size of a Size_t in bytes.
*/
-#ifndef USE_LONG_DOUBLE
-/*#define USE_LONG_DOUBLE / **/
-#endif
+#define Size_t_size 4 /**/
-/* USE_MORE_BITS:
- * This symbol, if defined, indicates that 64-bit interfaces and
- * long doubles should be used when available.
+/* Size_t:
+ * This symbol holds the type used to declare length parameters
+ * for string functions. It is usually size_t, but may be
+ * unsigned long, int, etc. It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#ifndef USE_MORE_BITS
-/*#define USE_MORE_BITS / **/
-#endif
+#define Size_t size_t /* length parameter for string functions */
-/* MULTIPLICITY:
- * This symbol, if defined, indicates that Perl should
- * be built to use multiplicity.
+/* Uid_t_f:
+ * This symbol defines the format string used for printing a Uid_t.
*/
-#ifndef MULTIPLICITY
-/*#define MULTIPLICITY / **/
-#endif
+#define Uid_t_f "ld" /**/
-/* USE_NSGETEXECUTABLEPATH:
- * This symbol, if defined, indicates that we can use _NSGetExecutablePath
- * and realpath to get a full path for the executable, and hence convert
- * $^X to an absolute path.
+/* Uid_t_sign:
+ * This symbol holds the signedness of a Uid_t.
+ * 1 for unsigned, -1 for signed.
*/
-/*#define USE_NSGETEXECUTABLEPATH / **/
+#define Uid_t_sign -1 /* UID sign */
-/* USE_PERLIO:
- * This symbol, if defined, indicates that the PerlIO abstraction should
- * be used throughout. If not defined, stdio should be
- * used in a fully backward compatible manner.
+/* Uid_t_size:
+ * This symbol holds the size of a Uid_t in bytes.
*/
-#ifndef USE_PERLIO
-#define USE_PERLIO /**/
-#endif
+#define Uid_t_size 4 /* UID size */
-/* USE_SOCKS:
- * This symbol, if defined, indicates that Perl should
- * be built to use socks.
+/* Uid_t:
+ * This symbol holds the type used to declare user ids in the kernel.
+ * It can be int, ushort, uid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#ifndef USE_SOCKS
-/*#define USE_SOCKS / **/
-#endif
+#define Uid_t uid_t /* UID type */
#endif
https://perl5.git.perl.org / perl5.git / blobdiff