return "'$value'";
}
+#
+# subroutine expand_os_specific expands $^O-specific preprocessing information
+# so that it will not be re-calculated at runtime in Dynaloader.pm
+#
+# Syntax of preprocessor should be kept extremely simple:
+# - directives are in double angle brackets <<...>>
+# - <<=string>> will be just evaluated
+# - for $^O-specific there are two forms:
+# <<$^O-eq-osname>>
+# <<$^O-ne-osname>>
+# this directive should be closed with respectively
+# <</$^O-eq-osname>>
+# <</$^O-ne-osname>>
+# construct <<|$^O-ne-osname>> means #else
+# nested <<$^O...>>-constructs are allowed but nested values must be for
+# different OS-names!
+#
+# -- added by VKON, 03-10-2004 to separate $^O-specific between OSes
+# (so that Win32 never checks for $^O eq 'VMS' for example)
+#
+# The $^O tests test both for $^O and for $Config{osname}.
+# The latter is better for some for cross-compilation setups.
+#
+sub expand_os_specific {
+ my $s = shift;
+ for ($s) {
+ s/<<=(.*?)>>/$1/gee;
+ s/<<\$\^O-(eq|ne)-(\w+)>>(.*?)<<\/\$\^O-\1-\2>>/
+ my ($op, $os, $expr) = ($1,$2,$3);
+ if ($op ne 'eq' and $op ne 'ne') {die "wrong eq-ne arg in $&"};
+ if ($expr =~ m[^(.*?)<<\|\$\^O-$op-$os>>(.*?)$]s) {
+ # #if;#else;#endif
+ my ($if,$el) = ($1,$2);
+ if (($op eq 'eq' and ($^O eq $os || $Config{osname} eq $os)) || ($op eq 'ne' and ($^O ne $os || $Config{osname} ne $os))) {
+ $if
+ }
+ else {
+ $el
+ }
+ }
+ else {
+ # #if;#endif
+ if (($op eq 'eq' and ($^O eq $os || $Config{osname} eq $os)) || ($op eq 'ne' and ($^O ne $os || $Config{osname} ne $os))) {
+ $expr
+ }
+ else {
+ ""
+ }
+ }
+ /ges;
+ if (/<<(=|\$\^O-)/) {die "bad <<\$^O-eq/ne-osname>> expression.".
+ " Unclosed brackets?";
+ }
+ }
+ $s;
+}
+
unlink "DynaLoader.pm" if -f "DynaLoader.pm";
open OUT, ">DynaLoader.pm" or die $!;
print OUT <<'EOT';
-# Generated from DynaLoader.pm.PL
+# Generated from DynaLoader_pm.PL
package DynaLoader;
#
# Tim.Bunce@ig.co.uk, August 1994
-use vars qw($VERSION *AUTOLOAD);
-
-$VERSION = 1.04; # avoid typo warning
+BEGIN {
+ $VERSION = '1.09';
+}
require AutoLoader;
*AUTOLOAD = \&AutoLoader::AUTOLOAD;
use Config;
-# The following require can't be removed during maintenance
-# releases, sadly, because of the risk of buggy code that does
-# require Carp; Carp::croak "..."; without brackets dying
-# if Carp hasn't been loaded in earlier compile time. :-(
-# We'll let those bugs get found on the development track.
-require Carp if $] < 5.00450;
-
# enable debug/trace messages from DynaLoader perl code
$dl_debug = $ENV{PERL_DL_DEBUG} || 0 unless defined $dl_debug;
sub dl_load_flags { 0x00 }
-# ($dl_dlext, $dlsrc)
-# = @Config::Config{'dlext', 'dlsrc'};
EOT
-print OUT " (\$dl_dlext, \$dlsrc) = (",
- to_string($Config::Config{'dlext'}), ",",
- to_string($Config::Config{'dlsrc'}), ")\n;" ;
+if ($ENV{PERL_BUILD_EXPAND_CONFIG_VARS}) {
+ print OUT "(\$dl_dlext, \$dl_so, \$dlsrc) = (",
+ to_string($Config{'dlext'}), ",",
+ to_string($Config{'so'}), ",",
+ to_string($Config{'dlsrc'}), ")\n;" ;
+}
+else {
+ print OUT <<'EOT';
+($dl_dlext, $dl_so, $dlsrc) = @Config::Config{qw(dlext so dlsrc)};
+EOT
+}
-print OUT <<'EOT';
+print OUT expand_os_specific(<<'EOT');
+<<$^O-eq-VMS>>
# Some systems need special handling to expand file specifications
# (VMS support by Charles Bailey <bailey@HMIVAX.HUMGEN.UPENN.EDU>)
# See dl_expandspec() for more details. Should be harmless but
# inefficient to define on systems that don't need it.
$Is_VMS = $^O eq 'VMS';
-$do_expand = $Is_VMS;
-$Is_MacOS = $^O eq 'MacOS';
+<</$^O-eq-VMS>>
+$do_expand = <<$^O-eq-VMS>>1<<|$^O-eq-VMS>>0<</$^O-eq-VMS>>;
+<<$^O-eq-MacOS>>
my $Mac_FS;
-$Mac_FS = eval { require Mac::FileSpec::Unixish } if $Is_MacOS;
+$Mac_FS = eval { require Mac::FileSpec::Unixish };
+<</$^O-eq-MacOS>>
@dl_require_symbols = (); # names of symbols we need
@dl_resolve_using = (); # names of files to link with
@dl_library_path = (); # path to look for files
#XSLoader.pm may have added elements before we were required
+#@dl_shared_objects = (); # shared objects for symbols we have
#@dl_librefs = (); # things we have loaded
#@dl_modules = (); # Modules we have loaded
EOT
sub dquoted_comma_list {
- join(", ", map {qq("$_")} @_);
+ join(", ", map {'"'.quotemeta($_).'"'} @_);
}
if ($ENV{PERL_BUILD_EXPAND_CONFIG_VARS}) {
my $pthsep;
if ($ENV{PERL_BUILD_EXPAND_CONFIG_VARS}) {
- $ldlibpthname = $Config::Config{ldlibpthname};
- $ldlibpthname_defined = defined $Config::Config{ldlibpthname} ? 1 : 0;
- $pthsep = $Config::Config{path_sep};
+ $ldlibpthname = to_string($Config::Config{ldlibpthname});
+ $ldlibpthname_defined = to_string(defined $Config::Config{ldlibpthname} ? 1 : 0);
+ $pthsep = to_string($Config::Config{path_sep});
}
else {
$ldlibpthname = q($Config::Config{ldlibpthname});
$ldlibpthname_defined = q(defined $Config::Config{ldlibpthname});
$pthsep = q($Config::Config{path_sep});
- print OUT <<EOT;
+}
+print OUT <<EOT;
my \$ldlibpthname = $ldlibpthname;
my \$ldlibpthname_defined = $ldlibpthname_defined;
my \$pthsep = $pthsep;
EOT
-}
my $env_dl_library_path = <<'EOT';
if ($ldlibpthname_defined &&
EOT
}
-print OUT <<'EOT';
+
+# following long string contains $^O-specific stuff, which is factored out
+print OUT expand_os_specific(<<'EOT');
# No prizes for guessing why we don't say 'bootstrap DynaLoader;' here.
# NOTE: All dl_*.xs (including dl_none.xs) define a dl_error() XSUB
boot_DynaLoader('DynaLoader') if defined(&boot_DynaLoader) &&
" dynamic loading or has the $module module statically linked into it.)\n")
unless defined(&dl_load_file);
+
+ <<$^O-eq-os2>>
+ # Can dynaload, but cannot dynaload Perl modules...
+ die 'Dynaloaded Perl modules are not available in this build of Perl' if $OS2::is_static;
+
+ <</$^O-eq-os2>>
my @modparts = split(/::/,$module);
my $modfname = $modparts[-1];
# It may also edit @modparts if required.
$modfname = &mod2fname(\@modparts) if defined &mod2fname;
+ <<$^O-eq-NetWare>>
# Truncate the module name to 8.3 format for NetWare
- if (($^O eq 'NetWare') && (length($modfname) > 8)) {
+ if ((length($modfname) > 8)) {
$modfname = substr($modfname, 0, 8);
}
+ <</$^O-eq-NetWare>>
- my $modpname = join(($Is_MacOS ? ':' : '/'),@modparts);
+ my $modpname = join(<<$^O-eq-MacOS>>':'<<|$^O-eq-MacOS>>'/'<</$^O-eq-MacOS>>,@modparts);
print STDERR "DynaLoader::bootstrap for $module ",
- ($Is_MacOS
- ? "(:auto:$modpname:$modfname.$dl_dlext)\n" :
- "(auto/$modpname/$modfname.$dl_dlext)\n")
+ <<$^O-eq-MacOS>> "(:auto:$modpname:$modfname.$dl_dlext)\n"
+ <<|$^O-eq-MacOS>>"(auto/$modpname/$modfname.$dl_dlext)\n"<</$^O-eq-MacOS>>
if $dl_debug;
foreach (@INC) {
- chop($_ = VMS::Filespec::unixpath($_)) if $Is_VMS;
- my $dir;
- if ($Is_MacOS) {
+ <<$^O-eq-VMS>>chop($_ = VMS::Filespec::unixpath($_));<</$^O-eq-VMS>>
+ <<$^O-eq-MacOS>>
my $path = $_;
if ($Mac_FS && ! -d $path) {
$path = Mac::FileSpec::Unixish::nativize($path);
}
$path .= ":" unless /:$/;
- $dir = "${path}auto:$modpname";
- } else {
- $dir = "$_/auto/$modpname";
- }
+ my $dir = "${path}auto:$modpname";
+ <<|$^O-eq-MacOS>>
+ my $dir = "$_/auto/$modpname";
+ <</$^O-eq-MacOS>>
next unless -d $dir; # skip over uninteresting directories
# check for common cases to avoid autoload of dl_findfile
- my $try = $Is_MacOS ? "$dir:$modfname.$dl_dlext" : "$dir/$modfname.$dl_dlext";
- last if $file = ($do_expand) ? dl_expandspec($try) : ((-f $try) && $try);
+ my $try = <<$^O-eq-MacOS>> "$dir:$modfname.$dl_dlext" <<|$^O-eq-MacOS>> "$dir/$modfname.$dl_dlext"<</$^O-eq-MacOS>>;
+ last if $file = <<$^O-eq-VMS>>($do_expand) ? dl_expandspec($try) : ((-f $try) && $try);
+ <<|$^O-eq-VMS>>(-f $try) && $try;
+ <</$^O-eq-VMS>>
# no luck here, save dir for possible later dl_findfile search
push @dirs, $dir;
croak("Can't locate loadable object for module $module in \@INC (\@INC contains: @INC)")
unless $file; # wording similar to error from 'require'
- $file = uc($file) if $Is_VMS && $Config::Config{d_vms_case_sensitive_symbols};
+ <<$^O-eq-VMS>>$file = uc($file) if $Config::Config{d_vms_case_sensitive_symbols};<</$^O-eq-VMS>>
my $bootname = "boot_$module";
$bootname =~ s/\W/_/g;
@dl_require_symbols = ($bootname);
my $boot_symbol_ref;
- if ($^O eq 'darwin') {
- if ($boot_symbol_ref = dl_find_symbol(0, $bootname)) {
- goto boot; #extension library has already been loaded, e.g. darwin
- }
+ <<$^O-eq-darwin>>
+ if ($boot_symbol_ref = dl_find_symbol(0, $bootname)) {
+ goto boot; #extension library has already been loaded, e.g. darwin
}
+ <</$^O-eq-darwin>>
# Many dynamic extension loading problems will appear to come from
# this section of code: XYZ failed at line 123 of DynaLoader.pm.
my $xs = dl_install_xsub("${module}::bootstrap", $boot_symbol_ref, $file);
# See comment block above
+
+ push(@dl_shared_objects, $file); # record files loaded
+
&$xs(@args);
}
my (@args) = @_;
my (@dirs, $dir); # which directories to search
my (@found); # full paths to real files we have found
-EOT
-
-print OUT ' my $dl_ext= ' . to_string($Config::Config{'dlext'}) .
- "; # \$Config::Config{'dlext'} suffix for perl extensions\n";
-print OUT ' my $dl_so = ' . to_string($Config::Config{'so'}) .
- "; # \$Config::Config{'so'} suffix for shared libraries\n";
-
-print OUT <<'EOT';
+ #my $dl_ext= <<=to_string($Config::Config{'dlext'})>>; # $Config::Config{'dlext'} suffix for perl extensions
+ #my $dl_so = <<=to_string($Config::Config{'so'})>>; # $Config::Config{'so'} suffix for shared libraries
print STDERR "dl_findfile(@args)\n" if $dl_debug;
# accumulate directories but process files as they appear
arg: foreach(@args) {
# Special fast case: full filepath requires no search
- if ($Is_VMS && m%[:>/\]]% && -f $_) {
+ <<$^O-eq-VMS>>
+ if (m%[:>/\]]% && -f $_) {
push(@found,dl_expandspec(VMS::Filespec::vmsify($_)));
last arg unless wantarray;
next;
}
- elsif ($Is_MacOS) {
+ <</$^O-eq-VMS>>
+ <<$^O-eq-MacOS>>
if (m/:/ && -f $_) {
push(@found,$_);
last arg unless wantarray;
}
- }
- elsif (m:/: && -f $_ && !$do_expand) {
+ <</$^O-eq-MacOS>>
+ <<$^O-ne-VMS>>
+ if (m:/: && -f $_) {
push(@found,$_);
last arg unless wantarray;
next;
}
+ <</$^O-ne-VMS>>
# Deal with directories first:
# Using a -L prefix is the preferred option (faster and more robust)
if (m:^-L:) { s/^-L//; push(@dirs, $_); next; }
- if ($Is_MacOS) {
+ <<$^O-eq-MacOS>>
# Otherwise we try to try to spot directories by a heuristic
# (this is a more complicated issue than it first appears)
if (m/:/ && -d $_) { push(@dirs, $_); next; }
}
}
next;
- }
+ <</$^O-eq-MacOS>>
# Otherwise we try to try to spot directories by a heuristic
# (this is a more complicated issue than it first appears)
if (m:/: && -d $_) { push(@dirs, $_); next; }
+ <<$^O-eq-VMS>>
# VMS: we may be using native VMS directory syntax instead of
# Unix emulation, so check this as well
- if ($Is_VMS && /[:>\]]/ && -d $_) { push(@dirs, $_); next; }
+ if (/[:>\]]/ && -d $_) { push(@dirs, $_); next; }
+ <</$^O-eq-VMS>>
# Only files should get this far...
my(@names, $name); # what filenames to look for
push(@names,"lib$_.a");
} else { # Umm, a bare name. Try various alternatives:
# these should be ordered with the most likely first
- push(@names,"$_.$dl_ext") unless m/\.$dl_ext$/o;
+ push(@names,"$_.$dl_dlext") unless m/\.$dl_dlext$/o;
push(@names,"$_.$dl_so") unless m/\.$dl_so$/o;
push(@names,"lib$_.$dl_so") unless m:/:;
push(@names,"$_.a") if !m/\.a$/ and $dlsrc eq "dl_dld.xs";
push(@names, $_);
}
+ my $dirsep = '/';
+ <<$^O-eq-symbian>>
+ $dirsep = '\\';
+ if ($0 =~ /^([a-z]):/i) {
+ my $drive = $1;
+ @dirs = map { "$drive:$_" } @dirs;
+ @dl_library_path = map { "$drive:$_" } @dl_library_path;
+ }
+ <</$^O-eq-symbian>>
foreach $dir (@dirs, @dl_library_path) {
next unless -d $dir;
- chop($dir = VMS::Filespec::unixpath($dir)) if $Is_VMS;
+ <<$^O-eq-VMS>>
+ chop($dir = VMS::Filespec::unixpath($dir));
+ <</$^O-eq-VMS>>
foreach $name (@names) {
- my($file) = "$dir/$name";
+ my($file) = "$dir$dirsep$name";
print STDERR " checking in $dir for $name\n" if $dl_debug;
$file = ($do_expand) ? dl_expandspec($file) : (-f $file && $file);
#$file = _check_file($file);
my $file = $spec; # default output to input
- if ($Is_VMS) { # dl_expandspec should be defined in dl_vms.xs
+ <<$^O-eq-VMS>>
+ # dl_expandspec should be defined in dl_vms.xs
require Carp;
Carp::croak("dl_expandspec: should be defined in XS file!\n");
- } else {
+ <<|$^O-eq-VMS>>
return undef unless -f $file;
- }
+ <</$^O-eq-VMS>>
print STDERR "dl_expandspec($spec) => $file\n" if $dl_debug;
$file;
}
DynaLoader - Dynamically load C libraries into Perl code
-dl_error(), dl_findfile(), dl_expandspec(), dl_load_file(), dl_unload_file(), dl_find_symbol(), dl_find_symbol_anywhere(), dl_undef_symbols(), dl_install_xsub(), dl_load_flags(), bootstrap() - routines used by DynaLoader modules
-
=head1 SYNOPSIS
package YourPackage;
$dl_debug
@dl_librefs
@dl_modules
+ @dl_shared_objects
Implemented in:
bootstrap($modulename) Perl
@filepaths = dl_findfile(@names) Perl
An array of module (package) names that have been bootstrap'ed.
+=item @dl_shared_objects
+
+An array of file names for the shared objects that were loaded.
+
=item dl_error()
Syntax:
Linux, and is a common choice when providing a "wrapper" on other
mechanisms as is done in the OS/2 port.)
-=item dl_loadflags()
+=item dl_load_flags()
Syntax:
- $flags = dl_loadflags $modulename;
+ $flags = dl_load_flags $modulename;
Designed to be a method call, and to be overridden by a derived class
(i.e. a class which has DynaLoader in its @ISA). The definition in
https://perl5.git.perl.org / perl5.git / blobdiff