-#ifndef _PERLIO_H
-#define _PERLIO_H
+/* perlio.h
+ *
+ * Copyright (C) 1996, 1997, 1999, 2000, 2001, 2002, 2003,
+ * 2004, 2005, 2006, 2007, by Larry Wall and others
+ *
+ * You may distribute under the terms of either the GNU General Public
+ * License or the Artistic License, as specified in the README file.
+ *
+ */
+
+#ifndef PERLIO_H_
+#define PERLIO_H_
/*
Interface for perl to IO functions.
- There is a hierachy of Configure determined #define controls:
- USE_STDIO - forces PerlIO_xxx() to be #define-d onto stdio functions.
- This is used for x2p subdirectory and for conservative
- builds - "just like perl5.00X used to be".
- This dominates over the others.
+ There is a hierarchy of Configure determined #define controls:
+ USE_STDIO - No longer available via Configure. Formerly forced
+ PerlIO_xxx() to be #define-d onto stdio functions.
+ Now generates compile-time error.
USE_PERLIO - The primary Configure variable that enables PerlIO.
- If USE_PERLIO is _NOT_ set
- then USE_STDIO above will be set to be conservative.
- If USE_PERLIO is set
- then there are two modes determined by USE_SFIO:
-
- USE_SFIO - If set causes PerlIO_xxx() to be #define-d onto sfio functions.
- A backward compatability mode for some specialist applications.
-
- If USE_SFIO is not set then PerlIO_xxx() are real functions
+ PerlIO_xxx() are real functions
defined in perlio.c which implement extra functionality
required for utf8 support.
- One further note - the table-of-functions scheme controlled
- by PERL_IMPLICIT_SYS turns on USE_PERLIO so that iperlsys.h can
- #define PerlIO_xxx() to go via the function table, without having
- to #undef them from (say) stdio forms.
-
*/
-#if defined(PERL_IMPLICIT_SYS)
-#ifndef USE_PERLIO
-#ifndef NETWARE
-# define USE_PERLIO
-#endif
-#endif
-#endif
-
#ifndef USE_PERLIO
# define USE_STDIO
#endif
#ifdef USE_STDIO
-# ifndef PERLIO_IS_STDIO
-# define PERLIO_IS_STDIO
-# endif
+# error "stdio is no longer supported as the default base layer -- use perlio."
#endif
/* -------------------- End of Configure controls ---------------------------- */
#undef O_BINARY
#endif
-#ifdef PERLIO_IS_STDIO
-/* #define PerlIO_xxxx() as equivalent stdio function */
-#include "perlsdio.h"
-#else /* PERLIO_IS_STDIO */
-#ifdef USE_SFIO
-/* #define PerlIO_xxxx() as equivalent sfio function */
-#include "perlsfio.h"
-#endif /* USE_SFIO */
-#endif /* PERLIO_IS_STDIO */
-
#ifndef PerlIO
/* ----------- PerlIO implementation ---------- */
/* PerlIO not #define-d to something else - define the implementation */
#define PerlIO PerlIO
#define PERLIO_LAYERS 1
-extern void PerlIO_define_layer(pTHX_ PerlIO_funcs *tab);
-extern PerlIO_funcs *PerlIO_find_layer(pTHX_ const char *name, STRLEN len,
- int load);
-extern PerlIO *PerlIO_push(pTHX_ PerlIO *f, PerlIO_funcs *tab,
- const char *mode, SV *arg);
-extern void PerlIO_pop(pTHX_ PerlIO *f);
+#define PERLIO_FUNCS_DECL(funcs) const PerlIO_funcs funcs
+#define PERLIO_FUNCS_CAST(funcs) (PerlIO_funcs*)(funcs)
+
+PERL_CALLCONV void PerlIO_define_layer(pTHX_ PerlIO_funcs *tab);
+PERL_CALLCONV PerlIO_funcs *PerlIO_find_layer(pTHX_ const char *name,
+ STRLEN len,
+ int load);
+PERL_CALLCONV PerlIO *PerlIO_push(pTHX_ PerlIO *f, PERLIO_FUNCS_DECL(*tab),
+ const char *mode, SV *arg);
+PERL_CALLCONV void PerlIO_pop(pTHX_ PerlIO *f);
+PERL_CALLCONV AV* PerlIO_get_layers(pTHX_ PerlIO *f);
+PERL_CALLCONV void PerlIO_clone(pTHX_ PerlInterpreter *proto,
+ CLONE_PARAMS *param);
#endif /* PerlIO */
/* ----------- End of implementation choices ---------- */
-#ifndef PERLIO_IS_STDIO
-/* Not using stdio _directly_ as PerlIO */
-
/* We now need to determine what happens if source trys to use stdio.
* There are three cases based on PERLIO_NOT_STDIO which XS code
* can set how it wants.
This is a known issue with some non UNIX ports which still use
"native" stdio features.
*/
-#ifndef PERLIO_NOT_STDIO
-#define PERLIO_NOT_STDIO 1
-#endif
+# ifndef PERLIO_NOT_STDIO
+# define PERLIO_NOT_STDIO 1
+# endif
#else
-#ifndef PERLIO_NOT_STDIO
-#define PERLIO_NOT_STDIO 0
-#endif
+# ifndef PERLIO_NOT_STDIO
+# define PERLIO_NOT_STDIO 0
+# endif
#endif
#ifdef PERLIO_NOT_STDIO
*/
#include "fakesdio.h"
#endif /* ifndef PERLIO_NOT_STDIO */
-#endif /* PERLIO_IS_STDIO */
-
-#define specialCopIO(sv) ((sv) != Nullsv)
/* ----------- fill in things that have not got #define'd ---------- */
#define BUFSIZ 1024
#endif
+/* The default buffer size for the perlio buffering layer */
+#ifndef PERLIOBUF_DEFAULT_BUFSIZ
+#define PERLIOBUF_DEFAULT_BUFSIZ (BUFSIZ > 8192 ? BUFSIZ : 8192)
+#endif
+
#ifndef SEEK_SET
#define SEEK_SET 0
#endif
#define SEEK_END 2
#endif
+#define PERLIO_DUP_CLONE 1
+#define PERLIO_DUP_FD 2
+
/* --------------------- Now prototypes for functions --------------- */
START_EXTERN_C
-#ifndef NEXT30_NO_ATTRIBUTE
-#ifndef HASATTRIBUTE /* disable GNU-cc attribute checking? */
-#ifdef __attribute__ /* Avoid possible redefinition errors */
-#undef __attribute__
-#endif
-#define __attribute__(attr)
-#endif
+#ifndef __attribute__format__
+# ifdef HASATTRIBUTE_FORMAT
+# define __attribute__format__(x,y,z) __attribute__((format(x,y,z)))
+# else
+# define __attribute__format__(x,y,z)
+# endif
#endif
#ifndef PerlIO_init
-extern void PerlIO_init(void);
+PERL_CALLCONV void PerlIO_init(pTHX);
#endif
#ifndef PerlIO_stdoutf
-extern int PerlIO_stdoutf(const char *, ...)
- __attribute__ ((__format__(__printf__, 1, 2)));
+PERL_CALLCONV int PerlIO_stdoutf(const char *, ...)
+ __attribute__format__(__printf__, 1, 2);
#endif
#ifndef PerlIO_puts
-extern int PerlIO_puts(PerlIO *, const char *);
+PERL_CALLCONV int PerlIO_puts(PerlIO *, const char *);
#endif
#ifndef PerlIO_open
-extern PerlIO *PerlIO_open(const char *, const char *);
+PERL_CALLCONV PerlIO *PerlIO_open(const char *, const char *);
#endif
#ifndef PerlIO_openn
-extern PerlIO *PerlIO_openn(pTHX_ const char *layers, const char *mode,
- int fd, int imode, int perm, PerlIO *old,
- int narg, SV **arg);
-#endif
-#ifndef PerlIO_close
-extern int PerlIO_close(PerlIO *);
+PERL_CALLCONV PerlIO *PerlIO_openn(pTHX_ const char *layers, const char *mode,
+ int fd, int imode, int perm, PerlIO *old,
+ int narg, SV **arg);
#endif
#ifndef PerlIO_eof
-extern int PerlIO_eof(PerlIO *);
+PERL_CALLCONV int PerlIO_eof(PerlIO *);
#endif
#ifndef PerlIO_error
-extern int PerlIO_error(PerlIO *);
+PERL_CALLCONV int PerlIO_error(PerlIO *);
#endif
#ifndef PerlIO_clearerr
-extern void PerlIO_clearerr(PerlIO *);
+PERL_CALLCONV void PerlIO_clearerr(PerlIO *);
#endif
#ifndef PerlIO_getc
-extern int PerlIO_getc(PerlIO *);
+PERL_CALLCONV int PerlIO_getc(PerlIO *);
#endif
#ifndef PerlIO_putc
-extern int PerlIO_putc(PerlIO *, int);
-#endif
-#ifndef PerlIO_flush
-extern int PerlIO_flush(PerlIO *);
+PERL_CALLCONV int PerlIO_putc(PerlIO *, int);
#endif
#ifndef PerlIO_ungetc
-extern int PerlIO_ungetc(PerlIO *, int);
-#endif
-#ifndef PerlIO_fileno
-extern int PerlIO_fileno(PerlIO *);
+PERL_CALLCONV int PerlIO_ungetc(PerlIO *, int);
#endif
#ifndef PerlIO_fdopen
-extern PerlIO *PerlIO_fdopen(int, const char *);
+PERL_CALLCONV PerlIO *PerlIO_fdopen(int, const char *);
#endif
#ifndef PerlIO_importFILE
-extern PerlIO *PerlIO_importFILE(FILE *, int);
+PERL_CALLCONV PerlIO *PerlIO_importFILE(FILE *, const char *);
#endif
#ifndef PerlIO_exportFILE
-extern FILE *PerlIO_exportFILE(PerlIO *, int);
+PERL_CALLCONV FILE *PerlIO_exportFILE(PerlIO *, const char *);
#endif
#ifndef PerlIO_findFILE
-extern FILE *PerlIO_findFILE(PerlIO *);
+PERL_CALLCONV FILE *PerlIO_findFILE(PerlIO *);
#endif
#ifndef PerlIO_releaseFILE
-extern void PerlIO_releaseFILE(PerlIO *, FILE *);
+PERL_CALLCONV void PerlIO_releaseFILE(PerlIO *, FILE *);
#endif
#ifndef PerlIO_read
-extern SSize_t PerlIO_read(PerlIO *, void *, Size_t);
+PERL_CALLCONV SSize_t PerlIO_read(PerlIO *, void *, Size_t);
#endif
#ifndef PerlIO_unread
-extern SSize_t PerlIO_unread(PerlIO *, const void *, Size_t);
+PERL_CALLCONV SSize_t PerlIO_unread(PerlIO *, const void *, Size_t);
#endif
#ifndef PerlIO_write
-extern SSize_t PerlIO_write(PerlIO *, const void *, Size_t);
+PERL_CALLCONV SSize_t PerlIO_write(PerlIO *, const void *, Size_t);
#endif
#ifndef PerlIO_setlinebuf
-extern void PerlIO_setlinebuf(PerlIO *);
+PERL_CALLCONV void PerlIO_setlinebuf(PerlIO *);
#endif
#ifndef PerlIO_printf
-extern int PerlIO_printf(PerlIO *, const char *, ...)
- __attribute__ ((__format__(__printf__, 2, 3)));
-#endif
-#ifndef PerlIO_sprintf
-extern int PerlIO_sprintf(char *, int, const char *, ...)
- __attribute__ ((__format__(__printf__, 3, 4)));
+PERL_CALLCONV int PerlIO_printf(PerlIO *, const char *, ...)
+ __attribute__format__(__printf__, 2, 3);
#endif
#ifndef PerlIO_vprintf
-extern int PerlIO_vprintf(PerlIO *, const char *, va_list);
+PERL_CALLCONV int PerlIO_vprintf(PerlIO *, const char *, va_list);
#endif
#ifndef PerlIO_tell
-extern Off_t PerlIO_tell(PerlIO *);
+PERL_CALLCONV Off_t PerlIO_tell(PerlIO *);
#endif
#ifndef PerlIO_seek
-extern int PerlIO_seek(PerlIO *, Off_t, int);
+PERL_CALLCONV int PerlIO_seek(PerlIO *, Off_t, int);
#endif
#ifndef PerlIO_rewind
-extern void PerlIO_rewind(PerlIO *);
+PERL_CALLCONV void PerlIO_rewind(PerlIO *);
#endif
#ifndef PerlIO_has_base
-extern int PerlIO_has_base(PerlIO *);
+PERL_CALLCONV int PerlIO_has_base(PerlIO *);
#endif
#ifndef PerlIO_has_cntptr
-extern int PerlIO_has_cntptr(PerlIO *);
+PERL_CALLCONV int PerlIO_has_cntptr(PerlIO *);
#endif
#ifndef PerlIO_fast_gets
-extern int PerlIO_fast_gets(PerlIO *);
+PERL_CALLCONV int PerlIO_fast_gets(PerlIO *);
#endif
#ifndef PerlIO_canset_cnt
-extern int PerlIO_canset_cnt(PerlIO *);
+PERL_CALLCONV int PerlIO_canset_cnt(PerlIO *);
#endif
#ifndef PerlIO_get_ptr
-extern STDCHAR *PerlIO_get_ptr(PerlIO *);
+PERL_CALLCONV STDCHAR *PerlIO_get_ptr(PerlIO *);
#endif
#ifndef PerlIO_get_cnt
-extern int PerlIO_get_cnt(PerlIO *);
+PERL_CALLCONV SSize_t PerlIO_get_cnt(PerlIO *);
#endif
#ifndef PerlIO_set_cnt
-extern void PerlIO_set_cnt(PerlIO *, int);
+PERL_CALLCONV void PerlIO_set_cnt(PerlIO *, SSize_t);
#endif
#ifndef PerlIO_set_ptrcnt
-extern void PerlIO_set_ptrcnt(PerlIO *, STDCHAR *, int);
+PERL_CALLCONV void PerlIO_set_ptrcnt(PerlIO *, STDCHAR *, SSize_t);
#endif
#ifndef PerlIO_get_base
-extern STDCHAR *PerlIO_get_base(PerlIO *);
+PERL_CALLCONV STDCHAR *PerlIO_get_base(PerlIO *);
#endif
#ifndef PerlIO_get_bufsiz
-extern int PerlIO_get_bufsiz(PerlIO *);
+PERL_CALLCONV SSize_t PerlIO_get_bufsiz(PerlIO *);
#endif
#ifndef PerlIO_tmpfile
-extern PerlIO *PerlIO_tmpfile(void);
+PERL_CALLCONV PerlIO *PerlIO_tmpfile(void);
+#endif
+#ifndef PerlIO_tmpfile_flags
+PERL_CALLCONV PerlIO *PerlIO_tmpfile_flags(int flags);
#endif
#ifndef PerlIO_stdin
-extern PerlIO *PerlIO_stdin(void);
+PERL_CALLCONV PerlIO *PerlIO_stdin(void);
#endif
#ifndef PerlIO_stdout
-extern PerlIO *PerlIO_stdout(void);
+PERL_CALLCONV PerlIO *PerlIO_stdout(void);
#endif
#ifndef PerlIO_stderr
-extern PerlIO *PerlIO_stderr(void);
+PERL_CALLCONV PerlIO *PerlIO_stderr(void);
#endif
#ifndef PerlIO_getpos
-extern int PerlIO_getpos(PerlIO *, SV *);
+PERL_CALLCONV int PerlIO_getpos(PerlIO *, SV *);
#endif
#ifndef PerlIO_setpos
-extern int PerlIO_setpos(PerlIO *, SV *);
+PERL_CALLCONV int PerlIO_setpos(PerlIO *, SV *);
#endif
#ifndef PerlIO_fdupopen
-extern PerlIO *PerlIO_fdupopen(pTHX_ PerlIO *);
+PERL_CALLCONV PerlIO *PerlIO_fdupopen(pTHX_ PerlIO *, CLONE_PARAMS *, int);
#endif
-#if !defined(PerlIO_modestr) && !defined(PERLIO_IS_STDIO)
-extern char *PerlIO_modestr(PerlIO *, char *buf);
+#if !defined(PerlIO_modestr)
+PERL_CALLCONV char *PerlIO_modestr(PerlIO *, char *buf);
#endif
#ifndef PerlIO_isutf8
-extern int PerlIO_isutf8(PerlIO *);
+PERL_CALLCONV int PerlIO_isutf8(PerlIO *);
#endif
#ifndef PerlIO_apply_layers
-extern int PerlIO_apply_layers(pTHX_ PerlIO *f, const char *mode,
- const char *names);
+PERL_CALLCONV int PerlIO_apply_layers(pTHX_ PerlIO *f, const char *mode,
+ const char *names);
#endif
#ifndef PerlIO_binmode
-extern int PerlIO_binmode(pTHX_ PerlIO *f, int iotype, int omode,
- const char *names);
+PERL_CALLCONV int PerlIO_binmode(pTHX_ PerlIO *f, int iotype, int omode,
+ const char *names);
#endif
#ifndef PerlIO_getname
-extern char *PerlIO_getname(PerlIO *, char *);
+PERL_CALLCONV char *PerlIO_getname(PerlIO *, char *);
#endif
-extern void PerlIO_destruct(pTHX);
+PERL_CALLCONV void PerlIO_destruct(pTHX);
-#ifndef PERLIO_IS_STDIO
+PERL_CALLCONV int PerlIO_intmode2str(int rawmode, char *mode, int *writing);
-extern void PerlIO_cleanup(void);
+#ifdef PERLIO_LAYERS
+PERL_CALLCONV void PerlIO_cleanup(pTHX);
-extern void PerlIO_debug(const char *fmt, ...);
+PERL_CALLCONV void PerlIO_debug(const char *fmt, ...)
+ __attribute__format__(__printf__, 1, 2);
+typedef struct PerlIO_list_s PerlIO_list_t;
#endif
END_EXTERN_C
-#endif /* _PERLIO_H */
+#endif /* PERLIO_H_ */
+
+/*
+ * ex: set ts=8 sts=4 sw=4 et:
+ */
https://perl5.git.perl.org / perl5.git / blobdiff