#
-# t/test.pl - most of Test::More functionality without the fuss
+# t/test.pl - most of Test::More functionality without the fuss, plus
+# has mappings native_to_latin1 and latin1_to_native so that fewer tests
+# on non ASCII-ish platforms need to be skipped
+
+
+# NOTE:
+#
+# Increment ($x++) has a certain amount of cleverness for things like
+#
+# $x = 'zz';
+# $x++; # $x eq 'aaa';
+#
+# stands more chance of breaking than just a simple
#
+# $x = $x + 1
+#
+# In this file, we use the latter "Baby Perl" approach, and increment
+# will be worked over by t/op/inc.t
$Level = 1;
my $test = 1;
my $planned;
my $noplan;
+my $Perl; # Safer version of $^X set by which_perl()
$TODO = 0;
$NO_ENDING = 0;
+$Tests_Are_Passing = 1;
+
+# Use this instead of print to avoid interference while testing globals.
+sub _print {
+ local($\, $", $,) = (undef, ' ', '');
+ print STDOUT @_;
+}
+
+sub _print_stderr {
+ local($\, $", $,) = (undef, ' ', '');
+ print STDERR @_;
+}
sub plan {
my $n;
}
} else {
my %plan = @_;
- $n = $plan{tests};
+ $n = $plan{tests};
}
- print STDOUT "1..$n\n" unless $noplan;
+ _print "1..$n\n" unless $noplan;
$planned = $n;
}
+
+# Set the plan at the end. See Test::More::done_testing.
+sub done_testing {
+ my $n = $test - 1;
+ $n = shift if @_;
+
+ _print "1..$n\n";
+ $planned = $n;
+}
+
+
END {
my $ran = $test - 1;
if (!$NO_ENDING) {
if (defined $planned && $planned != $ran) {
- print STDERR
+ _print_stderr
"# Looks like you planned $planned tests but ran $ran.\n";
} elsif ($noplan) {
- print "1..$ran\n";
+ _print "1..$ran\n";
}
}
}
-# Use this instead of "print STDERR" when outputing failure diagnostic
-# messages
sub _diag {
return unless @_;
- my @mess = map { /^#/ ? "$_\n" : "# $_\n" }
- map { split /\n/ } @_;
- my $fh = $TODO ? *STDOUT : *STDERR;
- print $fh @mess;
+ my @mess = _comment(@_);
+ $TODO ? _print(@mess) : _print_stderr(@mess);
+}
+# Use this instead of "print STDERR" when outputing failure diagnostic
+# messages
+sub diag {
+ _diag(@_);
+}
+
+# Use this instead of "print" when outputing informational messages
+sub note {
+ return unless @_;
+ _print( _comment(@_) );
+}
+
+sub _comment {
+ return map { /^#/ ? "$_\n" : "# $_\n" }
+ map { split /\n/ } @_;
}
sub skip_all {
if (@_) {
- print STDOUT "1..0 # Skipped: @_\n";
+ _print "1..0 # Skip @_\n";
} else {
- print STDOUT "1..0\n";
+ _print "1..0\n";
}
exit(0);
}
$out = $pass ? "ok $test" : "not ok $test";
}
- $out .= " # TODO $TODO" if $TODO;
- print STDOUT "$out\n";
+ if ($TODO) {
+ $out = $out . " # TODO $TODO";
+ } else {
+ $Tests_Are_Passing = 0 unless $pass;
+ }
+
+ _print "$out\n";
unless ($pass) {
_diag "# Failed $where\n";
# Ensure that the message is properly escaped.
_diag @mess;
- $test++;
+ $test = $test + 1; # don't use ++
return $pass;
}
my $x = shift;
return 'undef' unless defined $x;
my $q = $x;
- $q =~ s/\\/\\\\/;
- $q =~ s/'/\\'/;
+ $q =~ s/\\/\\\\/g;
+ $q =~ s/'/\\'/g;
return "'$q'";
}
my $y = '';
foreach my $c (unpack("U*", $x)) {
if ($c > 255) {
- $y .= sprintf "\\x{%x}", $c;
+ $y = $y . sprintf "\\x{%x}", $c;
} elsif ($backslash_escape{$c}) {
- $y .= $backslash_escape{$c};
+ $y = $y . $backslash_escape{$c};
} else {
my $z = chr $c; # Maybe we can get away with a literal...
- $z = sprintf "\\%03o", $c if $z =~ /[[:^print:]]/;
- $y .= $z;
+ if ($z =~ /[[:^print:]]/) {
+
+ # Use octal for characters traditionally expressed as
+ # such: the low controls
+ if ($c <= 037) {
+ $z = sprintf "\\%03o", $c;
+ } else {
+ $z = sprintf "\\x{%x}", $c;
+ }
+ }
+ $y = $y . $z;
}
}
$x = $y;
}
unless ($pass) {
- unshift(@mess, "# got "._q($got)."\n",
- "# expected "._q($expected)."\n");
+ unshift(@mess, "# got "._qq($got)."\n",
+ "# expected "._qq($expected)."\n");
}
_ok($pass, _where(), $name, @mess);
}
}
unless( $pass ) {
- unshift(@mess, "# it should not be "._q($got)."\n",
+ unshift(@mess, "# it should not be "._qq($got)."\n",
"# but it is.\n");
}
_ok($pass, _where(), $name, @mess);
if ($got eq $expected and $type !~ tr/a-z//) {
unshift @mess, "# $got - $expected = " . ($got - $expected) . "\n";
}
- unshift(@mess, "# got "._q($got)."\n",
- "# expected $type "._q($expected)."\n");
+ unshift(@mess, "# got "._qq($got)."\n",
+ "# expected $type "._qq($expected)."\n");
}
_ok($pass, _where(), $name, @mess);
}
if ($got eq $expected) {
unshift @mess, "# $got - $expected = " . ($got - $expected) . "\n";
}
- unshift@mess, "# got "._q($got)."\n",
- "# expected "._q($expected)." (within "._q($range).")\n";
+ unshift@mess, "# got "._qq($got)."\n",
+ "# expected "._qq($expected)." (within "._qq($range).")\n";
}
_ok($pass, _where(), $name, @mess);
}
$pass = $got !~ /$expected/ if $flip;
unless ($pass) {
unshift(@mess, "# got '$got'\n",
- "# expected /$expected/\n");
+ $flip
+ ? "# expected !~ /$expected/\n" : "# expected /$expected/\n");
}
+ local $Level = $Level + 1;
_ok($pass, _where(), $name, @mess);
}
}
sub next_test {
- $test++;
+ my $retval = $test;
+ $test = $test + 1; # don't use ++
+ $retval;
}
# Note: can't pass multipart messages since we try to
my $why = shift;
my $n = @_ ? shift : 1;
for (1..$n) {
- print STDOUT "ok $test # skip: $why\n";
- $test++;
+ _print "ok $test # skip $why\n";
+ $test = $test + 1;
}
local $^W = 0;
last SKIP;
}
+sub todo_skip {
+ my $why = shift;
+ my $n = @_ ? shift : 1;
+
+ for (1..$n) {
+ _print "not ok $test # TODO & SKIP $why\n";
+ $test = $test + 1;
+ }
+ local $^W = 0;
+ last TODO;
+}
+
sub eq_array {
my ($ra, $rb) = @_;
return 0 unless $#$ra == $#$rb;
for my $i (0..$#$ra) {
- next if !defined $ra->[$i] && !defined $rb->[$i];
+ next if !defined $ra->[$i] && !defined $rb->[$i];
return 0 if !defined $ra->[$i];
return 0 if !defined $rb->[$i];
return 0 unless $ra->[$i] eq $rb->[$i];
$key = "" . $key;
if (exists $orig->{$key}) {
if ($orig->{$key} ne $value) {
- print STDOUT "# key ", _qq($key), " was ", _qq($orig->{$key}),
+ _print "# key ", _qq($key), " was ", _qq($orig->{$key}),
" now ", _qq($value), "\n";
$fail = 1;
}
} else {
- print STDOUT "# key ", _qq($key), " is ", _qq($value),
+ _print "# key ", _qq($key), " is ", _qq($value),
", not in original.\n";
$fail = 1;
}
# Force a hash recompute if this perl's internals can cache the hash key.
$_ = "" . $_;
next if (exists $suspect->{$_});
- print STDOUT "# key ", _qq($_), " was ", _qq($orig->{$_}), " now missing.\n";
+ _print "# key ", _qq($_), " was ", _qq($orig->{$_}), " now missing.\n";
$fail = 1;
}
!$fail;
# Arguments :
# switches => [ command-line switches ]
# nolib => 1 # don't use -I../lib (included by default)
+# non_portable => Don't warn if a one liner contains quotes
# prog => one-liner (avoid quotes)
# progs => [ multi-liner (avoid quotes) ]
# progfile => perl script
my $is_mswin = $^O eq 'MSWin32';
my $is_netware = $^O eq 'NetWare';
-my $is_macos = $^O eq 'MacOS';
my $is_vms = $^O eq 'VMS';
+my $is_cygwin = $^O eq 'cygwin';
sub _quote_args {
my ($runperl, $args) = @_;
# In VMS protect with doublequotes because otherwise
# DCL will lowercase -- unless already doublequoted.
$_ = q(").$_.q(") if $is_vms && !/^\"/ && length($_) > 0;
- $$runperl .= ' ' . $_;
+ $runperl = $runperl . ' ' . $_;
}
+ return $runperl;
}
sub _create_runperl { # Create the string to qx in runperl().
my %args = @_;
- my $runperl = $^X =~ m/\s/ ? qq{"$^X"} : $^X;
+ my $runperl = which_perl();
+ if ($runperl =~ m/\s/) {
+ $runperl = qq{"$runperl"};
+ }
+ #- this allows, for example, to set PERL_RUNPERL_DEBUG=/usr/bin/valgrind
+ if ($ENV{PERL_RUNPERL_DEBUG}) {
+ $runperl = "$ENV{PERL_RUNPERL_DEBUG} $runperl";
+ }
unless ($args{nolib}) {
- if ($is_macos) {
- $runperl .= ' -I::lib';
- # Use UNIX style error messages instead of MPW style.
- $runperl .= ' -MMac::err=unix' if $args{stderr};
- }
- else {
- $runperl .= ' "-I../lib"'; # doublequotes because of VMS
- }
+ $runperl = $runperl . ' "-I../lib"'; # doublequotes because of VMS
}
if ($args{switches}) {
local $Level = 2;
die "test.pl:runperl(): 'switches' must be an ARRAYREF " . _where()
unless ref $args{switches} eq "ARRAY";
- _quote_args(\$runperl, $args{switches});
+ $runperl = _quote_args($runperl, $args{switches});
}
if (defined $args{prog}) {
die "test.pl:runperl(): both 'prog' and 'progs' cannot be used " . _where()
die "test.pl:runperl(): 'progs' must be an ARRAYREF " . _where()
unless ref $args{progs} eq "ARRAY";
foreach my $prog (@{$args{progs}}) {
+ if ($prog =~ tr/'"// && !$args{non_portable}) {
+ warn "quotes in prog >>$prog<< are not portable";
+ }
if ($is_mswin || $is_netware || $is_vms) {
- $runperl .= qq ( -e "$prog" );
+ $runperl = $runperl . qq ( -e "$prog" );
}
else {
- $runperl .= qq ( -e '$prog' );
+ $runperl = $runperl . qq ( -e '$prog' );
}
}
} elsif (defined $args{progfile}) {
- $runperl .= qq( "$args{progfile}");
+ $runperl = $runperl . qq( "$args{progfile}");
+ } else {
+ # You probaby didn't want to be sucking in from the upstream stdin
+ die "test.pl:runperl(): none of prog, progs, progfile, args, "
+ . " switches or stdin specified"
+ unless defined $args{args} or defined $args{switches}
+ or defined $args{stdin};
}
if (defined $args{stdin}) {
# so we don't try to put literal newlines and crs onto the
$args{stdin} =~ s/\r/\\r/g;
if ($is_mswin || $is_netware || $is_vms) {
- $runperl = qq{$^X -e "print qq(} .
+ $runperl = qq{$Perl -e "print qq(} .
$args{stdin} . q{)" | } . $runperl;
}
- elsif ($is_macos) {
- # MacOS can only do two processes under MPW at once;
- # the test itself is one; we can't do two more, so
- # write to temp file
- my $stdin = qq{$^X -e 'print qq(} . $args{stdin} . qq{)' > teststdin; };
- if ($args{verbose}) {
- my $stdindisplay = $stdin;
- $stdindisplay =~ s/\n/\n\#/g;
- print STDERR "# $stdindisplay\n";
- }
- `$stdin`;
- $runperl .= q{ < teststdin };
- }
else {
- $runperl = qq{$^X -e 'print qq(} .
+ $runperl = qq{$Perl -e 'print qq(} .
$args{stdin} . q{)' | } . $runperl;
}
}
if (defined $args{args}) {
- _quote_args(\$runperl, $args{args});
+ $runperl = _quote_args($runperl, $args{args});
}
- $runperl .= ' 2>&1' if $args{stderr} && !$is_macos;
- $runperl .= " \xB3 Dev:Null" if !$args{stderr} && $is_macos;
+ $runperl = $runperl . ' 2>&1' if $args{stderr};
if ($args{verbose}) {
my $runperldisplay = $runperl;
$runperldisplay =~ s/\n/\n\#/g;
- print STDERR "# $runperldisplay\n";
+ _print_stderr "# $runperldisplay\n";
}
return $runperl;
}
sub runperl {
+ die "test.pl:runperl() does not take a hashref"
+ if ref $_[0] and ref $_[0] eq 'HASH';
my $runperl = &_create_runperl;
- my $result = `$runperl`;
+ my $result;
+
+ my $tainted = ${^TAINT};
+ my %args = @_;
+ exists $args{switches} && grep m/^-T$/, @{$args{switches}} and $tainted = $tainted + 1;
+
+ if ($tainted) {
+ # We will assume that if you're running under -T, you really mean to
+ # run a fresh perl, so we'll brute force launder everything for you
+ my $sep;
+
+ if (! eval 'require Config; 1') {
+ warn "test.pl had problems loading Config: $@";
+ $sep = ':';
+ } else {
+ $sep = $Config::Config{path_sep};
+ }
+
+ my @keys = grep {exists $ENV{$_}} qw(CDPATH IFS ENV BASH_ENV);
+ local @ENV{@keys} = ();
+ # Untaint, plus take out . and empty string:
+ local $ENV{'DCL$PATH'} = $1 if $is_vms && exists($ENV{'DCL$PATH'}) && ($ENV{'DCL$PATH'} =~ /(.*)/s);
+ $ENV{PATH} =~ /(.*)/s;
+ local $ENV{PATH} =
+ join $sep, grep { $_ ne "" and $_ ne "." and -d $_ and
+ ($is_mswin or $is_vms or !(stat && (stat _)[2]&0022)) }
+ split quotemeta ($sep), $1;
+ if ($is_cygwin) { # Must have /bin under Cygwin
+ if (length $ENV{PATH}) {
+ $ENV{PATH} = $ENV{PATH} . $sep;
+ }
+ $ENV{PATH} = $ENV{PATH} . '/bin';
+ }
+ $runperl =~ /(.*)/s;
+ $runperl = $1;
+
+ $result = `$runperl`;
+ } else {
+ $result = `$runperl`;
+ }
$result =~ s/\n\n/\n/ if $is_vms; # XXX pipes sometimes double these
return $result;
}
-*run_perl = \&runperl; # Nice alias.
+# Nice alias
+*run_perl = *run_perl = \&runperl; # shut up "used only once" warning
sub DIE {
- print STDERR "# @_\n";
+ _print_stderr "# @_\n";
exit 1;
}
# A somewhat safer version of the sometimes wrong $^X.
-my $Perl;
sub which_perl {
unless (defined $Perl) {
$Perl = $^X;
-
+
# VMS should have 'perl' aliased properly
return $Perl if $^O eq 'VMS';
my $exe;
- eval "require Config; Config->import";
- if ($@) {
+ if (! eval 'require Config; 1') {
warn "test.pl had problems loading Config: $@";
$exe = '';
} else {
- $exe = $Config{_exe};
+ $exe = $Config::Config{_exe};
}
$exe = '' unless defined $exe;
-
+
# This doesn't absolutize the path: beware of future chdirs().
# We could do File::Spec->abs2rel() but that does getcwd()s,
# which is a bit heavyweight to do here.
-
+
if ($Perl =~ /^perl\Q$exe\E$/i) {
my $perl = "perl$exe";
- eval "require File::Spec";
- if ($@) {
+ if (! eval 'require File::Spec; 1') {
warn "test.pl had problems loading File::Spec: $@";
$Perl = "./$perl";
} else {
# the command.
if ($Perl !~ /\Q$exe\E$/i) {
- $Perl .= $exe;
+ $Perl = $Perl . $exe;
}
warn "which_perl: cannot find $Perl from $^X" unless -f $Perl;
-
+
# For subcommands to use.
$ENV{PERLEXE} = $Perl;
}
}
sub unlink_all {
+ my $count = 0;
foreach my $file (@_) {
1 while unlink $file;
- print STDERR "# Couldn't unlink '$file': $!\n" if -f $file;
+ if( -f $file ){
+ _print_stderr "# Couldn't unlink '$file': $!\n";
+ }else{
+ ++$count;
+ }
}
+ $count;
}
+my %tmpfiles;
+END { unlink_all keys %tmpfiles }
+
+# A regexp that matches the tempfile names
+$::tempfile_regexp = 'tmp\d+[A-Z][A-Z]?';
+
+# Avoid ++, avoid ranges, avoid split //
+my @letters = qw(A B C D E F G H I J K L M N O P Q R S T U V W X Y Z);
+sub tempfile {
+ my $count = 0;
+ do {
+ my $temp = $count;
+ my $try = "tmp$$";
+ do {
+ $try = $try . $letters[$temp % 26];
+ $temp = int ($temp / 26);
+ } while $temp;
+ # Need to note all the file names we allocated, as a second request may
+ # come before the first is created.
+ if (!-e $try && !$tmpfiles{$try}) {
+ # We have a winner
+ $tmpfiles{$try} = 1;
+ return $try;
+ }
+ $count = $count + 1;
+ } while $count < 26 * 26;
+ die "Can't find temporary file name starting 'tmp$$'";
+}
-my $tmpfile = "misctmp000";
-1 while -f ++$tmpfile;
-END { unlink_all $tmpfile }
+# This is the temporary file for _fresh_perl
+my $tmpfile = tempfile();
#
# _fresh_perl
sub _fresh_perl {
my($prog, $resolve, $runperl_args, $name) = @_;
- $runperl_args ||= {};
+ # Given the choice of the mis-parsable {}
+ # (we want an anon hash, but a borked lexer might think that it's a block)
+ # or relying on taking a reference to a lexical
+ # (\ might be mis-parsed, and the reference counting on the pad may go
+ # awry)
+ # it feels like the least-worse thing is to assume that auto-vivification
+ # works. At least, this is only going to be a run-time failure, so won't
+ # affect tests using this file but not this function.
$runperl_args->{progfile} = $tmpfile;
$runperl_args->{stderr} = 1;
if( $^O eq 'VMS' ) {
$prog =~ s#/dev/null#NL:#;
- # VMS file locking
+ # VMS file locking
$prog =~ s{if \(-e _ and -f _ and -r _\)}
{if (-e _ and -f _)}
}
- print TEST $prog, "\n";
+ print TEST $prog;
close TEST or die "Cannot close $tmpfile: $!";
my $results = runperl(%$runperl_args);
my $status = $?;
# Clean up the results into something a bit more predictable.
- $results =~ s/\n+$//;
- $results =~ s/at\s+misctmp\d+\s+line/at - line/g;
- $results =~ s/of\s+misctmp\d+\s+aborted/of - aborted/g;
+ $results =~ s/\n+$//;
+ $results =~ s/at\s+$::tempfile_regexp\s+line/at - line/g;
+ $results =~ s/of\s+$::tempfile_regexp\s+aborted/of - aborted/g;
# bison says 'parse error' instead of 'syntax error',
# various yaccs may or may not capitalize 'syntax'.
# Use the first line of the program as a name if none was given
unless( $name ) {
($first_line, $name) = $prog =~ /^((.{1,50}).*)/;
- $name .= '...' if length $first_line > length $name;
+ $name = $name . '...' if length $first_line > length $name;
}
_ok($pass, _where(), "fresh_perl - $name");
sub fresh_perl_is {
my($prog, $expected, $runperl_args, $name) = @_;
+
+ # _fresh_perl() is going to clip the trailing newlines off the result.
+ # This will make it so the test author doesn't have to know that.
+ $expected =~ s/\n+$//;
+
local $Level = 2;
_fresh_perl($prog,
sub { @_ ? $_[0] eq $expected : $expected },
my($prog, $expected, $runperl_args, $name) = @_;
local $Level = 2;
_fresh_perl($prog,
- sub { @_ ?
- $_[0] =~ (ref $expected ? $expected : /$expected/) :
- $expected },
+ sub { @_ ? $_[0] =~ $expected : $expected },
$runperl_args, $name);
}
+sub can_ok ($@) {
+ my($proto, @methods) = @_;
+ my $class = ref $proto || $proto;
+
+ unless( @methods ) {
+ return _ok( 0, _where(), "$class->can(...)" );
+ }
+
+ my @nok = ();
+ foreach my $method (@methods) {
+ local($!, $@); # don't interfere with caller's $@
+ # eval sometimes resets $!
+ eval { $proto->can($method) } || push @nok, $method;
+ }
+
+ my $name;
+ $name = @methods == 1 ? "$class->can('$methods[0]')"
+ : "$class->can(...)";
+
+ _ok( !@nok, _where(), $name );
+}
+
+
+# Call $class->new( @$args ); and run the result through isa_ok.
+# See Test::More::new_ok
+sub new_ok {
+ my($class, $args, $obj_name) = @_;
+ $args ||= [];
+ $object_name = "The object" unless defined $obj_name;
+
+ local $Level = $Level + 1;
+
+ my $obj;
+ my $ok = eval { $obj = $class->new(@$args); 1 };
+ my $error = $@;
+
+ if($ok) {
+ isa_ok($obj, $class, $object_name);
+ }
+ else {
+ ok( 0, "new() died" );
+ diag("Error was: $@");
+ }
+
+ return $obj;
+
+}
+
+
+sub isa_ok ($$;$) {
+ my($object, $class, $obj_name) = @_;
+
+ my $diag;
+ $obj_name = 'The object' unless defined $obj_name;
+ my $name = "$obj_name isa $class";
+ if( !defined $object ) {
+ $diag = "$obj_name isn't defined";
+ }
+ elsif( !ref $object ) {
+ $diag = "$obj_name isn't a reference";
+ }
+ else {
+ # We can't use UNIVERSAL::isa because we want to honor isa() overrides
+ local($@, $!); # eval sometimes resets $!
+ my $rslt = eval { $object->isa($class) };
+ if( $@ ) {
+ if( $@ =~ /^Can't call method "isa" on unblessed reference/ ) {
+ if( !UNIVERSAL::isa($object, $class) ) {
+ my $ref = ref $object;
+ $diag = "$obj_name isn't a '$class' it's a '$ref'";
+ }
+ } else {
+ die <<WHOA;
+WHOA! I tried to call ->isa on your object and got some weird error.
+This should never happen. Please contact the author immediately.
+Here's the error.
+$@
+WHOA
+ }
+ }
+ elsif( !$rslt ) {
+ my $ref = ref $object;
+ $diag = "$obj_name isn't a '$class' it's a '$ref'";
+ }
+ }
+
+ _ok( !$diag, _where(), $name );
+}
+
+# Set a watchdog to timeout the entire test file
+# NOTE: If the test file uses 'threads', then call the watchdog() function
+# _AFTER_ the 'threads' module is loaded.
+sub watchdog ($;$)
+{
+ my $timeout = shift;
+ my $method = shift || "";
+ my $timeout_msg = 'Test process timed out - terminating';
+
+ # Valgrind slows perl way down so give it more time before dying.
+ $timeout *= 10 if $ENV{PERL_VALGRIND};
+
+ my $pid_to_kill = $$; # PID for this process
+
+ if ($method eq "alarm") {
+ goto WATCHDOG_VIA_ALARM;
+ }
+
+ # shut up use only once warning
+ my $threads_on = $threads::threads && $threads::threads;
+
+ # Don't use a watchdog process if 'threads' is loaded -
+ # use a watchdog thread instead
+ if (!$threads_on) {
+
+ # On Windows and VMS, try launching a watchdog process
+ # using system(1, ...) (see perlport.pod)
+ if (($^O eq 'MSWin32') || ($^O eq 'VMS')) {
+ # On Windows, try to get the 'real' PID
+ if ($^O eq 'MSWin32') {
+ eval { require Win32; };
+ if (defined(&Win32::GetCurrentProcessId)) {
+ $pid_to_kill = Win32::GetCurrentProcessId();
+ }
+ }
+
+ # If we still have a fake PID, we can't use this method at all
+ return if ($pid_to_kill <= 0);
+
+ # Launch watchdog process
+ my $watchdog;
+ eval {
+ local $SIG{'__WARN__'} = sub {
+ _diag("Watchdog warning: $_[0]");
+ };
+ my $sig = $^O eq 'VMS' ? 'TERM' : 'KILL';
+ my $cmd = _create_runperl( prog => "sleep($timeout);" .
+ "warn qq/# $timeout_msg" . '\n/;' .
+ "kill($sig, $pid_to_kill);");
+ $watchdog = system(1, $cmd);
+ };
+ if ($@ || ($watchdog <= 0)) {
+ _diag('Failed to start watchdog');
+ _diag($@) if $@;
+ undef($watchdog);
+ return;
+ }
+
+ # Add END block to parent to terminate and
+ # clean up watchdog process
+ eval "END { local \$! = 0; local \$? = 0;
+ wait() if kill('KILL', $watchdog); };";
+ return;
+ }
+
+ # Try using fork() to generate a watchdog process
+ my $watchdog;
+ eval { $watchdog = fork() };
+ if (defined($watchdog)) {
+ if ($watchdog) { # Parent process
+ # Add END block to parent to terminate and
+ # clean up watchdog process
+ eval "END { local \$! = 0; local \$? = 0;
+ wait() if kill('KILL', $watchdog); };";
+ return;
+ }
+
+ ### Watchdog process code
+
+ # Load POSIX if available
+ eval { require POSIX; };
+
+ # Execute the timeout
+ sleep($timeout - 2) if ($timeout > 2); # Workaround for perlbug #49073
+ sleep(2);
+
+ # Kill test process if still running
+ if (kill(0, $pid_to_kill)) {
+ _diag($timeout_msg);
+ kill('KILL', $pid_to_kill);
+ }
+
+ # Don't execute END block (added at beginning of this file)
+ $NO_ENDING = 1;
+
+ # Terminate ourself (i.e., the watchdog)
+ POSIX::_exit(1) if (defined(&POSIX::_exit));
+ exit(1);
+ }
+
+ # fork() failed - fall through and try using a thread
+ }
+
+ # Use a watchdog thread because either 'threads' is loaded,
+ # or fork() failed
+ if (eval 'require threads; 1') {
+ threads->create(sub {
+ # Load POSIX if available
+ eval { require POSIX; };
+
+ # Execute the timeout
+ my $time_left = $timeout;
+ do {
+ $time_left = $time_left - sleep($time_left);
+ } while ($time_left > 0);
+
+ # Kill the parent (and ourself)
+ select(STDERR); $| = 1;
+ _diag($timeout_msg);
+ POSIX::_exit(1) if (defined(&POSIX::_exit));
+ my $sig = $^O eq 'VMS' ? 'TERM' : 'KILL';
+ kill($sig, $pid_to_kill);
+ })->detach();
+ return;
+ }
+
+ # If everything above fails, then just use an alarm timeout
+WATCHDOG_VIA_ALARM:
+ if (eval { alarm($timeout); 1; }) {
+ # Load POSIX if available
+ eval { require POSIX; };
+
+ # Alarm handler will do the actual 'killing'
+ $SIG{'ALRM'} = sub {
+ select(STDERR); $| = 1;
+ _diag($timeout_msg);
+ POSIX::_exit(1) if (defined(&POSIX::_exit));
+ my $sig = $^O eq 'VMS' ? 'TERM' : 'KILL';
+ kill($sig, $pid_to_kill);
+ };
+ }
+}
+
+my $cp_0037 = # EBCDIC code page 0037
+ '\x00\x01\x02\x03\x37\x2D\x2E\x2F\x16\x05\x25\x0B\x0C\x0D\x0E\x0F' .
+ '\x10\x11\x12\x13\x3C\x3D\x32\x26\x18\x19\x3F\x27\x1C\x1D\x1E\x1F' .
+ '\x40\x5A\x7F\x7B\x5B\x6C\x50\x7D\x4D\x5D\x5C\x4E\x6B\x60\x4B\x61' .
+ '\xF0\xF1\xF2\xF3\xF4\xF5\xF6\xF7\xF8\xF9\x7A\x5E\x4C\x7E\x6E\x6F' .
+ '\x7C\xC1\xC2\xC3\xC4\xC5\xC6\xC7\xC8\xC9\xD1\xD2\xD3\xD4\xD5\xD6' .
+ '\xD7\xD8\xD9\xE2\xE3\xE4\xE5\xE6\xE7\xE8\xE9\xBA\xE0\xBB\xB0\x6D' .
+ '\x79\x81\x82\x83\x84\x85\x86\x87\x88\x89\x91\x92\x93\x94\x95\x96' .
+ '\x97\x98\x99\xA2\xA3\xA4\xA5\xA6\xA7\xA8\xA9\xC0\x4F\xD0\xA1\x07' .
+ '\x20\x21\x22\x23\x24\x15\x06\x17\x28\x29\x2A\x2B\x2C\x09\x0A\x1B' .
+ '\x30\x31\x1A\x33\x34\x35\x36\x08\x38\x39\x3A\x3B\x04\x14\x3E\xFF' .
+ '\x41\xAA\x4A\xB1\x9F\xB2\x6A\xB5\xBD\xB4\x9A\x8A\x5F\xCA\xAF\xBC' .
+ '\x90\x8F\xEA\xFA\xBE\xA0\xB6\xB3\x9D\xDA\x9B\x8B\xB7\xB8\xB9\xAB' .
+ '\x64\x65\x62\x66\x63\x67\x9E\x68\x74\x71\x72\x73\x78\x75\x76\x77' .
+ '\xAC\x69\xED\xEE\xEB\xEF\xEC\xBF\x80\xFD\xFE\xFB\xFC\xAD\xAE\x59' .
+ '\x44\x45\x42\x46\x43\x47\x9C\x48\x54\x51\x52\x53\x58\x55\x56\x57' .
+ '\x8C\x49\xCD\xCE\xCB\xCF\xCC\xE1\x70\xDD\xDE\xDB\xDC\x8D\x8E\xDF';
+
+my $cp_1047 = # EBCDIC code page 1047
+ '\x00\x01\x02\x03\x37\x2D\x2E\x2F\x16\x05\x15\x0B\x0C\x0D\x0E\x0F' .
+ '\x10\x11\x12\x13\x3C\x3D\x32\x26\x18\x19\x3F\x27\x1C\x1D\x1E\x1F' .
+ '\x40\x5A\x7F\x7B\x5B\x6C\x50\x7D\x4D\x5D\x5C\x4E\x6B\x60\x4B\x61' .
+ '\xF0\xF1\xF2\xF3\xF4\xF5\xF6\xF7\xF8\xF9\x7A\x5E\x4C\x7E\x6E\x6F' .
+ '\x7C\xC1\xC2\xC3\xC4\xC5\xC6\xC7\xC8\xC9\xD1\xD2\xD3\xD4\xD5\xD6' .
+ '\xD7\xD8\xD9\xE2\xE3\xE4\xE5\xE6\xE7\xE8\xE9\xAD\xE0\xBD\x5F\x6D' .
+ '\x79\x81\x82\x83\x84\x85\x86\x87\x88\x89\x91\x92\x93\x94\x95\x96' .
+ '\x97\x98\x99\xA2\xA3\xA4\xA5\xA6\xA7\xA8\xA9\xC0\x4F\xD0\xA1\x07' .
+ '\x20\x21\x22\x23\x24\x25\x06\x17\x28\x29\x2A\x2B\x2C\x09\x0A\x1B' .
+ '\x30\x31\x1A\x33\x34\x35\x36\x08\x38\x39\x3A\x3B\x04\x14\x3E\xFF' .
+ '\x41\xAA\x4A\xB1\x9F\xB2\x6A\xB5\xBB\xB4\x9A\x8A\xB0\xCA\xAF\xBC' .
+ '\x90\x8F\xEA\xFA\xBE\xA0\xB6\xB3\x9D\xDA\x9B\x8B\xB7\xB8\xB9\xAB' .
+ '\x64\x65\x62\x66\x63\x67\x9E\x68\x74\x71\x72\x73\x78\x75\x76\x77' .
+ '\xAC\x69\xED\xEE\xEB\xEF\xEC\xBF\x80\xFD\xFE\xFB\xFC\xBA\xAE\x59' .
+ '\x44\x45\x42\x46\x43\x47\x9C\x48\x54\x51\x52\x53\x58\x55\x56\x57' .
+ '\x8C\x49\xCD\xCE\xCB\xCF\xCC\xE1\x70\xDD\xDE\xDB\xDC\x8D\x8E\xDF';
+
+my $cp_bc = # EBCDIC code page POSiX-BC
+ '\x00\x01\x02\x03\x37\x2D\x2E\x2F\x16\x05\x15\x0B\x0C\x0D\x0E\x0F' .
+ '\x10\x11\x12\x13\x3C\x3D\x32\x26\x18\x19\x3F\x27\x1C\x1D\x1E\x1F' .
+ '\x40\x5A\x7F\x7B\x5B\x6C\x50\x7D\x4D\x5D\x5C\x4E\x6B\x60\x4B\x61' .
+ '\xF0\xF1\xF2\xF3\xF4\xF5\xF6\xF7\xF8\xF9\x7A\x5E\x4C\x7E\x6E\x6F' .
+ '\x7C\xC1\xC2\xC3\xC4\xC5\xC6\xC7\xC8\xC9\xD1\xD2\xD3\xD4\xD5\xD6' .
+ '\xD7\xD8\xD9\xE2\xE3\xE4\xE5\xE6\xE7\xE8\xE9\xBB\xBC\xBD\x6A\x6D' .
+ '\x4A\x81\x82\x83\x84\x85\x86\x87\x88\x89\x91\x92\x93\x94\x95\x96' .
+ '\x97\x98\x99\xA2\xA3\xA4\xA5\xA6\xA7\xA8\xA9\xFB\x4F\xFD\xFF\x07' .
+ '\x20\x21\x22\x23\x24\x25\x06\x17\x28\x29\x2A\x2B\x2C\x09\x0A\x1B' .
+ '\x30\x31\x1A\x33\x34\x35\x36\x08\x38\x39\x3A\x3B\x04\x14\x3E\x5F' .
+ '\x41\xAA\xB0\xB1\x9F\xB2\xD0\xB5\x79\xB4\x9A\x8A\xBA\xCA\xAF\xA1' .
+ '\x90\x8F\xEA\xFA\xBE\xA0\xB6\xB3\x9D\xDA\x9B\x8B\xB7\xB8\xB9\xAB' .
+ '\x64\x65\x62\x66\x63\x67\x9E\x68\x74\x71\x72\x73\x78\x75\x76\x77' .
+ '\xAC\x69\xED\xEE\xEB\xEF\xEC\xBF\x80\xE0\xFE\xDD\xFC\xAD\xAE\x59' .
+ '\x44\x45\x42\x46\x43\x47\x9C\x48\x54\x51\x52\x53\x58\x55\x56\x57' .
+ '\x8C\x49\xCD\xCE\xCB\xCF\xCC\xE1\x70\xC0\xDE\xDB\xDC\x8D\x8E\xDF';
+
+my $straight = # Avoid ranges
+ '\x00\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0A\x0B\x0C\x0D\x0E\x0F' .
+ '\x10\x11\x12\x13\x14\x15\x16\x17\x18\x19\x1A\x1B\x1C\x1D\x1E\x1F' .
+ '\x20\x21\x22\x23\x24\x25\x26\x27\x28\x29\x2A\x2B\x2C\x2D\x2E\x2F' .
+ '\x30\x31\x32\x33\x34\x35\x36\x37\x38\x39\x3A\x3B\x3C\x3D\x3E\x3F' .
+ '\x40\x41\x42\x43\x44\x45\x46\x47\x48\x49\x4A\x4B\x4C\x4D\x4E\x4F' .
+ '\x50\x51\x52\x53\x54\x55\x56\x57\x58\x59\x5A\x5B\x5C\x5D\x5E\x5F' .
+ '\x60\x61\x62\x63\x64\x65\x66\x67\x68\x69\x6A\x6B\x6C\x6D\x6E\x6F' .
+ '\x70\x71\x72\x73\x74\x75\x76\x77\x78\x79\x7A\x7B\x7C\x7D\x7E\x7F' .
+ '\x80\x81\x82\x83\x84\x85\x86\x87\x88\x89\x8A\x8B\x8C\x8D\x8E\x8F' .
+ '\x90\x91\x92\x93\x94\x95\x96\x97\x98\x99\x9A\x9B\x9C\x9D\x9E\x9F' .
+ '\xA0\xA1\xA2\xA3\xA4\xA5\xA6\xA7\xA8\xA9\xAA\xAB\xAC\xAD\xAE\xAF' .
+ '\xB0\xB1\xB2\xB3\xB4\xB5\xB6\xB7\xB8\xB9\xBA\xBB\xBC\xBD\xBE\xBF' .
+ '\xC0\xC1\xC2\xC3\xC4\xC5\xC6\xC7\xC8\xC9\xCA\xCB\xCC\xCD\xCE\xCF' .
+ '\xD0\xD1\xD2\xD3\xD4\xD5\xD6\xD7\xD8\xD9\xDA\xDB\xDC\xDD\xDE\xDF' .
+ '\xE0\xE1\xE2\xE3\xE4\xE5\xE6\xE7\xE8\xE9\xEA\xEB\xEC\xED\xEE\xEF' .
+ '\xF0\xF1\xF2\xF3\xF4\xF5\xF6\xF7\xF8\xF9\xFA\xFB\xFC\xFD\xFE\xFF';
+
+# The following 2 functions allow tests to work on both EBCDIC and
+# ASCII-ish platforms. They convert string scalars between the native
+# character set and the set of 256 characters which is usually called
+# Latin1.
+#
+# These routines don't work on UTF-EBCDIC and UTF-8.
+
+sub native_to_latin1($) {
+ my $string = shift;
+
+ return $string if ord('^') == 94; # ASCII, Latin1
+ my $cp;
+ if (ord('^') == 95) { # EBCDIC 1047
+ $cp = \$cp_1047;
+ }
+ elsif (ord('^') == 106) { # EBCDIC POSIX-BC
+ $cp = \$cp_bc;
+ }
+ elsif (ord('^') == 176) { # EBCDIC 037 */
+ $cp = \$cp_0037;
+ }
+ else {
+ die "Unknown native character set";
+ }
+
+ eval '$string =~ tr/' . $$cp . '/' . $straight . '/';
+ return $string;
+}
+
+sub latin1_to_native($) {
+ my $string = shift;
+
+ return $string if ord('^') == 94; # ASCII, Latin1
+ my $cp;
+ if (ord('^') == 95) { # EBCDIC 1047
+ $cp = \$cp_1047;
+ }
+ elsif (ord('^') == 106) { # EBCDIC POSIX-BC
+ $cp = \$cp_bc;
+ }
+ elsif (ord('^') == 176) { # EBCDIC 037 */
+ $cp = \$cp_0037;
+ }
+ else {
+ die "Unknown native character set";
+ }
+
+ eval '$string =~ tr/' . $straight . '/' . $$cp . '/';
+ return $string;
+}
+
+sub ord_latin1_to_native {
+ # given an input latin1 code point, return the platform's native
+ # equivalent value
+
+ return ord latin1_to_native(chr $_[0]);
+}
+
+sub ord_native_to_latin1 {
+ # given an input platform code point, return the latin1 equivalent value
+
+ return ord native_to_latin1(chr $_[0]);
+}
+
1;
https://perl5.git.perl.org / perl5.git / blobdiff