#
-# Makefile to build perl on Windowns NT using Microsoft NMAKE.
-#
+# Makefile to build perl on Windows NT using DMAKE.
+# Supported compilers:
+# Visual C++ 2.0 thro 5.0
+# Borland C++ 5.02
+# Mingw32 with gcc-2.8.1 or egcs-1.0.2
#
# This is set up to build a perl.exe that runs off a shared library
# (perl.dll). Also makes individual DLLs for the XS extensions.
#
+##
+## Build configuration. Edit the values below to suit your needs.
+##
+
#
# Set these to wherever you want "nmake install" to put your
# newly built perl.
-INST_DRV=c:
-INST_TOP=$(INST_DRV)\perl
+#
+INST_DRV *= c:
+INST_TOP *= $(INST_DRV)\perl
+
+#
+# Comment this out if you DON'T want your perl installation to be versioned.
+# This means that the new installation will overwrite any files from the
+# old installation at the same INST_TOP location. Leaving it enabled is
+# the safest route, as perl adds the extra version directory to all the
+# locations it installs files to. If you disable it, an alternative
+# versioned installation can be obtained by setting INST_TOP above to a
+# path that includes an arbitrary version string.
+#
+INST_VER *= \5.00471
#
-# uncomment one if you are using Visual C++ 2.x or Borland
-# comment out both if you are using Visual C++ 4.x and above
-#CCTYPE=MSVC20
-CCTYPE=BORLAND
+# uncomment to enable threads-capabilities
+#
+#USE_THREADS *= define
+
+#
+# uncomment one
+#
+#CCTYPE *= MSVC20
+#CCTYPE *= MSVC
+CCTYPE *= BORLAND
+#CCTYPE *= GCC
+
+#
+# uncomment next line if you want to use the perl object
+# Currently, this cannot be enabled if you ask for threads above
+#
+#OBJECT *= -DPERL_OBJECT
#
# uncomment next line if you want debug version of perl (big,slow)
-#CFG=Debug
+#
+#CFG *= Debug
+
+#
+# uncomment to enable use of PerlCRT.DLL. Highly recommended. It has
+# patches that fix known bugs in MSCVRT.DLL. You will need to download it
+# from: <TBD> and follow the directions in the package to install.
+#
+#USE_PERLCRT *= define
+
+#
+# if you have the source for des_fcrypt(), uncomment this and make sure the
+# file exists (see README.win32). File should be located at the perl
+# top level directory.
+#
+#CRYPT_SRC *= des_fcrypt.c
+
+#
+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
+# library, uncomment this, and make sure the library exists (see README.win32)
+# Specify the full pathname of the library.
+#
+#CRYPT_LIB *= des_fcrypt.lib
+
+#
+# set this if you wish to use perl's malloc
+# WARNING: Turning this on/off WILL break binary compatibility with extensions
+# you may have compiled with/without it. Be prepared to recompile all
+# extensions if you change the default. Currently, this cannot be enabled
+# if you ask for PERL_OBJECT above.
+#
+#PERL_MALLOC *= define
#
# set the install locations of the compiler include/libraries
-#CCHOME = f:\msdev\vc
-CCHOME = D:\bc5
-CCINCDIR = $(CCHOME)\include
-CCLIBDIR = $(CCHOME)\lib
+#
+#CCHOME *= f:\msdev\vc
+CCHOME *= C:\bc5
+#CCHOME *= D:\packages\mingw32
+CCINCDIR *= $(CCHOME)\include
+CCLIBDIR *= $(CCHOME)\lib
+
+#
+# specify space-separated list of extra directories to look for libraries
+#
+EXTRALIBDIRS *=
#
# set this to point to cmd.exe (only needed if you use some
# alternate shell that doesn't grok cmd.exe style commands)
-SHELL = g:\winnt\system32\cmd.exe
+#
+#SHELL *= g:\winnt\system32\cmd.exe
#
# set this to your email address (perl will guess a value from
# from your loginname and your hostname, which may not be right)
-#EMAIL =
+#
+#EMAIL *=
+
+##
+## Build configuration ends.
+##
##################### CHANGE THESE ONLY IF YOU MUST #####################
+.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
+D_CRYPT = undef
+.ELSE
+D_CRYPT = define
+CRYPT_FLAG = -DHAVE_DES_FCRYPT
+.ENDIF
+
+.IF "$(OBJECT)" != ""
+PERL_MALLOC != undef
+.ENDIF
+
+PERL_MALLOC *= undef
+
+USE_THREADS *= undef
+
+#BUILDOPT *= -DMULTIPLICITY
+#BUILDOPT *= -DPERL_GLOBAL_STRUCT -DMULTIPLICITY
+# -DUSE_PERLIO -D__STDC__=1 -DUSE_SFIO -DI_SFIO -I\sfio97\include
+
+.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE
+
+PROCESSOR_ARCHITECTURE *= x86
+
+.IF "$(USE_THREADS)" == "define"
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
+.ELSE
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
+.ENDIF
+
+ARCHDIR = ..\lib\$(ARCHNAME)
+COREDIR = ..\lib\CORE
+AUTODIR = ..\lib\auto
+
#
# Programs to compile, build .lib files and link
#
.IF "$(CCTYPE)" == "BORLAND"
-CC = bcc32
-LINK32 = tlink32
-LIB32 = tlib
-IMPLIB = implib
+CC = bcc32
+LINK32 = tlink32
+LIB32 = tlib /P128
+IMPLIB = implib -c
#
# Options
#
-RUNTIME = -D_RTLDLL
-INCLUDES = -I.\include -I. -I.. -I$(CCINCDIR)
-#PCHFLAGS = -H -H$(INTDIR)\bcmoduls.pch
-DEFINES = -DWIN32 -DPERLDLL
-SUBSYS = console
-LIBC = cw32mti.lib
-LIBFILES = import32.lib $(LIBC) odbc32.lib odbccp32.lib
+RUNTIME = -D_RTLDLL
+INCLUDES = -I.\include -I. -I.. -I$(CCINCDIR)
+#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
+DEFINES = -DWIN32 $(BUILDOPT) $(CRYPT_FLAG)
+LOCDEFS = -DPERLDLL -DPERL_CORE
+SUBSYS = console
+CXX_FLAG = -P
-WINIOMAYBE =
+LIBC = cw32mti.lib
+LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC) odbc32.lib odbccp32.lib
.IF "$(CFG)" == "Debug"
-OPTIMIZE = -v $(RUNTIME)
-LINK_DBG = -v
+OPTIMIZE = -v $(RUNTIME) -DDEBUGGING
+LINK_DBG = -v
.ELSE
-OPTIMIZE = -O $(RUNTIME)
-LINK_DBG =
+OPTIMIZE = -O2 $(RUNTIME)
+LINK_DBG =
.ENDIF
-CFLAGS = -w -tWM -tWD $(INCLUDES) $(DEFINES) $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L$(CCLIBDIR)
-OBJOUT_FLAG = -o
+CFLAGS = -w -d -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+ $(PCHFLAGS) $(OPTIMIZE)
+LINK_FLAGS = $(LINK_DBG) -L$(CCLIBDIR) $(EXTRALIBDIRS:^"-L")
+OBJOUT_FLAG = -o
+EXEOUT_FLAG = -e
+LIBOUT_FLAG =
+
+.ELIF "$(CCTYPE)" == "GCC"
+
+CC = gcc
+LINK32 = gcc
+LIB32 = ar rc
+IMPLIB = dlltool
+
+o = .o
+a = .a
+
+#
+# Options
+#
+RUNTIME =
+INCLUDES = -I.\include -I. -I..
+DEFINES = -DWIN32 $(BUILDOPT) $(CRYPT_FLAG)
+LOCDEFS = -DPERLDLL -DPERL_CORE
+SUBSYS = console
+CXX_FLAG = -xc++
+
+LIBC = -lcrtdll
+LIBFILES = $(CRYPT_LIB) -ladvapi32 -luser32 -lnetapi32 -lwsock32 -lmingw32 \
+ -lgcc -lmoldname $(LIBC) -lkernel32
+.IF "$(CFG)" == "Debug"
+OPTIMIZE = -g -O2 $(RUNTIME) -DDEBUGGING
+LINK_DBG = -g
.ELSE
+OPTIMIZE = -g -O2 $(RUNTIME)
+LINK_DBG =
+.ENDIF
+
+CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
+LINK_FLAGS = $(LINK_DBG) -L$(CCLIBDIR) $(EXTRALIBDIRS:^"-L")
+OBJOUT_FLAG = -o
+EXEOUT_FLAG = -o
+LIBOUT_FLAG =
+
+.ELSE
+
+CC = cl.exe
+LINK32 = link.exe
+LIB32 = $(LINK32) -lib
-CC=cl.exe
-LINK32=link.exe
-LIB32=$(LINK32) -lib
#
# Options
#
-.IF "$(RUNTIME)" == ""
-RUNTIME = -MD
+
+RUNTIME = -MD
+INCLUDES = -I.\include -I. -I..
+#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
+DEFINES = -DWIN32 -D_CONSOLE $(BUILDOPT) $(CRYPT_FLAG)
+LOCDEFS = -DPERLDLL -DPERL_CORE
+SUBSYS = console
+CXX_FLAG = -TP -GX
+
+.IF "$(USE_PERLCRT)" == ""
+.IF "$(CFG)" == "Debug"
+PERLCRTLIBC = msvcrtd.lib
+.ELSE
+PERLCRTLIBC = msvcrt.lib
+.ENDIF
+.ELSE
+.IF "$(CFG)" == "Debug"
+PERLCRTLIBC = PerlCRTD.lib
+.ELSE
+PERLCRTLIBC = PerlCRT.lib
+.ENDIF
.ENDIF
-INCLUDES = -I.\include -I. -I..
-#PCHFLAGS = -Fp$(INTDIR)\vcmoduls.pch -YX
-DEFINES = -DWIN32 -D_CONSOLE -DPERLDLL
-SUBSYS = console
.IF "$(RUNTIME)" == "-MD"
-LIBC = msvcrt.lib
-WINIOMAYBE =
+LIBC = $(PERLCRTLIBC)
.ELSE
-LIBC = libcmt.lib
-WINIOMAYBE = win32io.obj
+LIBC = libcmt.lib
.ENDIF
.IF "$(CFG)" == "Debug"
.IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE = -Od $(RUNTIME) -Z7 -D_DEBUG
+OPTIMIZE = -Od $(RUNTIME) -Z7 -D_DEBUG -DDEBUGGING
.ELSE
-OPTIMIZE = -Od $(RUNTIME)d -Z7 -D_DEBUG
+OPTIMIZE = -Od $(RUNTIME)d -Zi -D_DEBUG -DDEBUGGING
.ENDIF
-LINK_DBG = -debug -pdb:none
+LINK_DBG = -debug -pdb:none
.ELSE
.IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE = -Od $(RUNTIME) -DNDEBUG
+OPTIMIZE = -Od $(RUNTIME) -DNDEBUG
.ELSE
-OPTIMIZE = -Od $(RUNTIME) -DNDEBUG
+OPTIMIZE = -Od $(RUNTIME) -DNDEBUG
.ENDIF
-LINK_DBG = -release
+LINK_DBG = -release
.ENDIF
-# we don't add LIBC here, the compiler do it based on -MD/-MT
-LIBFILES = oldnames.lib kernel32.lib user32.lib gdi32.lib \
- winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib \
- oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib
+LIBBASEFILES = $(CRYPT_LIB) oldnames.lib kernel32.lib user32.lib gdi32.lib \
+ winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib \
+ oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
+ version.lib odbc32.lib odbccp32.lib
+
+# we add LIBC here, since we may be using PerlCRT.dll
+LIBFILES = $(LIBBASEFILES) $(LIBC)
+
+CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+ $(PCHFLAGS) $(OPTIMIZE)
+LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) -machine:$(PROCESSOR_ARCHITECTURE)
+OBJOUT_FLAG = -Fo
+EXEOUT_FLAG = -Fe
+LIBOUT_FLAG = /out:
-CFLAGS = -nologo -W3 $(INCLUDES) $(DEFINES) $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = -nologo $(LIBFILES) $(LINK_DBG) -machine:I386
-OBJOUT_FLAG = -Fo
+.ENDIF
+.IF "$(OBJECT)" != ""
+OPTIMIZE += $(CXX_FLAG)
.ENDIF
+CFLAGS_O = $(CFLAGS) $(OBJECT)
+
#################### do not edit below this line #######################
############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
+o *= .obj
+a *= .lib
+
+LKPRE = INPUT (
+LKPOST = )
+
#
# Rules
#
-.SUFFIXES :
-.SUFFIXES : .c .obj .dll .lib .exe
-.c.obj:
- $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $<
+.SUFFIXES : .c $(o) .dll $(a) .exe
-.IF "$(CCTYPE)" == "BORLAND"
+.c$(o):
+ $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
+
+.y.c:
+ $(NOOP)
-.obj.dll:
- $(LINK32) -Tpd -ap $(LINK_FLAGS) c0d32.obj $<,$@,,$(LIBFILES),$(*B).def
+$(o).dll:
+.IF "$(CCTYPE)" == "BORLAND"
+ $(LINK32) -Tpd -ap $(LINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
$(IMPLIB) $(*B).lib $@
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -o $@ $(LINK_FLAGS) $< $(LIBFILES)
+ $(IMPLIB) -def $(*B).def $(*B).a $@
.ELSE
-
-.obj.dll:
$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
- -out:$@ $(LINK_FLAGS) $< $(LIBPERL)
-
+ -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
.ENDIF
#
-INST_BIN=$(INST_TOP)\bin
-INST_LIB=$(INST_TOP)\lib
-INST_POD=$(INST_LIB)\pod
-INST_HTML=$(INST_POD)\html
-LIBDIR=..\lib
-EXTDIR=..\ext
-PODDIR=..\pod
-EXTUTILSDIR=$(LIBDIR)\extutils
+INST_BIN = $(INST_TOP)$(INST_VER)\bin\$(ARCHNAME)
+INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
+INST_LIB = $(INST_TOP)$(INST_VER)\lib
+INST_POD = $(INST_LIB)\pod
+INST_HTML = $(INST_POD)\html
+LIBDIR = ..\lib
+EXTDIR = ..\ext
+PODDIR = ..\pod
+EXTUTILSDIR = $(LIBDIR)\extutils
#
# various targets
-PERLIMPLIB=..\perl.lib
-MINIPERL=..\miniperl.exe
-PERLDLL=..\perl.dll
-PERLEXE=..\perl.exe
-GLOBEXE=..\perlglob.exe
-CONFIGPM=..\lib\Config.pm
-MINIMOD=..\lib\ExtUtils\Miniperl.pm
-
-PL2BAT=bin\PL2BAT.BAT
-GLOBBAT = perlglob.bat
+MINIPERL = ..\miniperl.exe
+MINIDIR = .\mini
+PERLEXE = ..\perl.exe
+GLOBEXE = ..\perlglob.exe
+CONFIGPM = ..\lib\Config.pm
+MINIMOD = ..\lib\ExtUtils\Miniperl.pm
+X2P = ..\x2p\a2p.exe
+
+PL2BAT = bin\pl2bat.pl
+GLOBBAT = bin\perlglob.bat
+
+UTILS = \
+ ..\utils\h2ph \
+ ..\utils\splain \
+ ..\utils\perlbug \
+ ..\utils\pl2pm \
+ ..\utils\c2ph \
+ ..\utils\h2xs \
+ ..\utils\perldoc \
+ ..\utils\pstruct \
+ ..\utils\perlcc \
+ ..\pod\checkpods \
+ ..\pod\pod2html \
+ ..\pod\pod2latex \
+ ..\pod\pod2man \
+ ..\pod\pod2text \
+ ..\x2p\find2perl \
+ ..\x2p\s2p \
+ bin\www.pl \
+ bin\runperl.pl \
+ bin\pl2bat.pl \
+ bin\perlglob.pl \
+ bin\search.pl
.IF "$(CCTYPE)" == "BORLAND"
-# Borland wildargs is incompatible with MS setargv
-CFGSH_TMPL = config.bc
-CFGH_TMPL = config_H.bc
-# Borland's perl.exe will work on W95, so we don't make this
+CFGSH_TMPL = config.bc
+CFGH_TMPL = config_H.bc
+
+.ELIF "$(CCTYPE)" == "GCC"
+
+CFGSH_TMPL = config.gc
+CFGH_TMPL = config_H.gc
+PERLIMPLIB *= ..\libperl$(a)
.ELSE
-MAKE = nmake -nologo
-CFGSH_TMPL = config.vc
-CFGH_TMPL = config_H.vc
-PERL95EXE=..\perl95.exe
+CFGSH_TMPL = config.vc
+CFGH_TMPL = config_H.vc
+.IF "$(USE_PERLCRT)" == ""
+PERL95EXE = ..\perl95.exe
+.ENDIF
.ENDIF
-XCOPY=xcopy /f /r /i /d
-RCOPY=xcopy /f /r /i /e /d
-#NULL=
+.IF "$(OBJECT)" == "-DPERL_OBJECT"
+PERLIMPLIB *= ..\perlcore$(a)
+PERLDLL = ..\perlcore.dll
+CAPILIB = $(COREDIR)\PerlCAPI$(a)
+.ELSE
+PERLIMPLIB *= ..\perl$(a)
+PERLDLL = ..\perl.dll
+CAPILIB =
+.ENDIF
+
+XCOPY = xcopy /f /r /i /d
+RCOPY = xcopy /f /r /i /e /d
+NOOP = @echo
#
# filenames given to xsubpp must have forward slashes (since it puts
# full pathnames in #line strings)
-XSUBPP=..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp -C++ -prototypes
-
-CORE_C= ..\av.c \
- ..\deb.c \
- ..\doio.c \
- ..\doop.c \
- ..\dump.c \
- ..\globals.c \
- ..\gv.c \
- ..\hv.c \
- ..\mg.c \
- ..\op.c \
- ..\perl.c \
- ..\perlio.c \
- ..\perly.c \
- ..\pp.c \
- ..\pp_ctl.c \
- ..\pp_hot.c \
- ..\pp_sys.c \
- ..\regcomp.c \
- ..\regexec.c \
- ..\run.c \
- ..\scope.c \
- ..\sv.c \
- ..\taint.c \
- ..\toke.c \
- ..\universal.c \
- ..\util.c
-
-CORE_OBJ= ..\av.obj \
- ..\deb.obj \
- ..\doio.obj \
- ..\doop.obj \
- ..\dump.obj \
- ..\globals.obj \
- ..\gv.obj \
- ..\hv.obj \
- ..\mg.obj \
- ..\op.obj \
- ..\perl.obj \
- ..\perlio.obj \
- ..\perly.obj \
- ..\pp.obj \
- ..\pp_ctl.obj \
- ..\pp_hot.obj \
- ..\pp_sys.obj \
- ..\regcomp.obj \
- ..\regexec.obj \
- ..\run.obj \
- ..\scope.obj \
- ..\sv.obj \
- ..\taint.obj \
- ..\toke.obj \
- ..\universal.obj\
- ..\util.obj
-
-WIN32_C = perllib.c \
- win32.c \
- win32io.c \
- win32sck.c
-
-WIN32_OBJ = win32.obj \
- win32io.obj \
- win32sck.obj
-
-DLL_OBJ = perllib.obj $(DYNALOADER).obj
-
-CORE_H = ..\av.h \
- ..\cop.h \
- ..\cv.h \
- ..\dosish.h \
- ..\embed.h \
- ..\form.h \
- ..\gv.h \
- ..\handy.h \
- ..\hv.h \
- ..\mg.h \
- ..\nostdio.h \
- ..\op.h \
- ..\opcode.h \
- ..\perl.h \
- ..\perlio.h \
- ..\perlsdio.h \
- ..\perlsfio.h \
- ..\perly.h \
- ..\pp.h \
- ..\proto.h \
- ..\regexp.h \
- ..\scope.h \
- ..\sv.h \
- ..\unixish.h \
- ..\util.h \
- ..\XSUB.h \
- .\config.h \
- ..\EXTERN.h \
- .\include\dirent.h \
- .\include\netdb.h \
- .\include\sys\socket.h \
- .\win32.h
-
-
-EXTENSIONS=DynaLoader Socket IO Fcntl Opcode SDBM_File
-
-DYNALOADER=$(EXTDIR)\DynaLoader\DynaLoader
-SOCKET=$(EXTDIR)\Socket\Socket
-FCNTL=$(EXTDIR)\Fcntl\Fcntl
-OPCODE=$(EXTDIR)\Opcode\Opcode
-SDBM_FILE=$(EXTDIR)\SDBM_File\SDBM_File
-IO=$(EXTDIR)\IO\IO
-
-SOCKET_DLL=..\lib\auto\Socket\Socket.dll
-FCNTL_DLL=..\lib\auto\Fcntl\Fcntl.dll
-OPCODE_DLL=..\lib\auto\Opcode\Opcode.dll
-SDBM_FILE_DLL=..\lib\auto\SDBM_File\SDBM_File.dll
-IO_DLL=..\lib\auto\IO\IO.dll
-
-STATICLINKMODULES=DynaLoader
-DYNALOADMODULES= \
- $(SOCKET_DLL) \
- $(FCNTL_DLL) \
- $(OPCODE_DLL) \
- $(SDBM_FILE_DLL)\
- $(IO_DLL)
-
-POD2HTML=$(PODDIR)\pod2html
-POD2MAN=$(PODDIR)\pod2man
-POD2LATEX=$(PODDIR)\pod2latex
-POD2TEXT=$(PODDIR)\pod2text
+XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
+ -C++ -prototypes
+
+MICROCORE_SRC = \
+ ..\av.c \
+ ..\byterun.c \
+ ..\deb.c \
+ ..\doio.c \
+ ..\doop.c \
+ ..\dump.c \
+ ..\globals.c \
+ ..\gv.c \
+ ..\hv.c \
+ ..\mg.c \
+ ..\op.c \
+ ..\perl.c \
+ ..\perly.c \
+ ..\pp.c \
+ ..\pp_ctl.c \
+ ..\pp_hot.c \
+ ..\pp_sys.c \
+ ..\regcomp.c \
+ ..\regexec.c \
+ ..\run.c \
+ ..\scope.c \
+ ..\sv.c \
+ ..\taint.c \
+ ..\toke.c \
+ ..\universal.c \
+ ..\util.c
+
+.IF "$(CRYPT_SRC)" != ""
+MICROCORE_SRC += ..\$(CRYPT_SRC)
+.ENDIF
+
+.IF "$(PERL_MALLOC)" == "define"
+EXTRACORE_SRC += ..\malloc.c
+.ENDIF
+
+.IF "$(OBJECT)" == ""
+EXTRACORE_SRC += ..\perlio.c
+.ENDIF
+
+WIN32_SRC = \
+ .\win32.c \
+ .\win32sck.c
+
+.IF "$(USE_THREADS)" == "define"
+WIN32_SRC += .\win32thread.c
+.ENDIF
+
+PERL95_SRC = \
+ perl95.c \
+ win32mt.c \
+ win32sckmt.c
+
+.IF "$(CRYPT_SRC)" != ""
+PERL95_SRC += ..\$(CRYPT_SRC)
+.ENDIF
+
+DLL_SRC = $(DYNALOADER).c
+
+
+.IF "$(OBJECT)" == ""
+DLL_SRC += perllib.c
+.ENDIF
+
+X2P_SRC = \
+ ..\x2p\a2p.c \
+ ..\x2p\hash.c \
+ ..\x2p\str.c \
+ ..\x2p\util.c \
+ ..\x2p\walk.c
+
+CORE_NOCFG_H = \
+ ..\av.h \
+ ..\byterun.h \
+ ..\bytecode.h \
+ ..\cop.h \
+ ..\cv.h \
+ ..\dosish.h \
+ ..\embed.h \
+ ..\form.h \
+ ..\gv.h \
+ ..\handy.h \
+ ..\hv.h \
+ ..\iperlsys.h \
+ ..\mg.h \
+ ..\nostdio.h \
+ ..\op.h \
+ ..\opcode.h \
+ ..\perl.h \
+ ..\perlsdio.h \
+ ..\perlsfio.h \
+ ..\perly.h \
+ ..\pp.h \
+ ..\proto.h \
+ ..\regexp.h \
+ ..\scope.h \
+ ..\sv.h \
+ ..\thread.h \
+ ..\unixish.h \
+ ..\util.h \
+ ..\XSUB.h \
+ ..\EXTERN.h \
+ ..\perlvars.h \
+ ..\intrpvar.h \
+ ..\thrdvar.h \
+ .\include\dirent.h \
+ .\include\netdb.h \
+ .\include\sys\socket.h \
+ .\win32.h
+
+CORE_H = $(CORE_NOCFG_H) .\config.h
+
+MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
+CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
+WIN32_OBJ = $(WIN32_SRC:db:+$(o))
+MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
+MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
+MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
+PERL95_OBJ = $(PERL95_SRC:db:+$(o))
+DLL_OBJ = $(DLL_SRC:db:+$(o))
+X2P_OBJ = $(X2P_SRC:db:+$(o))
+
+PERLDLL_OBJ = $(CORE_OBJ)
+PERLEXE_OBJ = perlmain$(o)
+
+.IF "$(OBJECT)" == ""
+PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
+.ELSE
+PERLEXE_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
+PERL95_OBJ += DynaLoadmt$(o)
+.ENDIF
+
+DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
+ Data/Dumper
+STATIC_EXT = DynaLoader
+NONXS_EXT = Errno
+
+DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
+SOCKET = $(EXTDIR)\Socket\Socket
+FCNTL = $(EXTDIR)\Fcntl\Fcntl
+OPCODE = $(EXTDIR)\Opcode\Opcode
+SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
+IO = $(EXTDIR)\IO\IO
+POSIX = $(EXTDIR)\POSIX\POSIX
+ATTRS = $(EXTDIR)\attrs\attrs
+THREAD = $(EXTDIR)\Thread\Thread
+B = $(EXTDIR)\B\B
+RE = $(EXTDIR)\re\re
+DUMPER = $(EXTDIR)\Data\Dumper\Dumper
+ERRNO = $(EXTDIR)\Errno\Errno
+
+SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
+FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
+OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
+SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
+IO_DLL = $(AUTODIR)\IO\IO.dll
+POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
+ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
+THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
+B_DLL = $(AUTODIR)\B\B.dll
+DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
+RE_DLL = $(AUTODIR)\re\re.dll
+
+ERRNO_PM = $(LIBDIR)\Errno.pm
+
+EXTENSION_C = \
+ $(SOCKET).c \
+ $(FCNTL).c \
+ $(OPCODE).c \
+ $(SDBM_FILE).c \
+ $(IO).c \
+ $(POSIX).c \
+ $(ATTRS).c \
+ $(THREAD).c \
+ $(RE).c \
+ $(DUMPER).c \
+ $(B).c
+
+EXTENSION_DLL = \
+ $(SOCKET_DLL) \
+ $(FCNTL_DLL) \
+ $(OPCODE_DLL) \
+ $(SDBM_FILE_DLL)\
+ $(IO_DLL) \
+ $(POSIX_DLL) \
+ $(ATTRS_DLL) \
+ $(DUMPER_DLL) \
+ $(B_DLL)
+
+EXTENSION_PM = \
+ $(ERRNO_PM)
+
+# re.dll doesn't build with PERL_OBJECT yet
+.IF "$(OBJECT)" == ""
+EXTENSION_DLL += \
+ $(THREAD_DLL) \
+ $(RE_DLL)
+.ENDIF
+
+POD2HTML = $(PODDIR)\pod2html
+POD2MAN = $(PODDIR)\pod2man
+POD2LATEX = $(PODDIR)\pod2latex
+POD2TEXT = $(PODDIR)\pod2text
+
+CFG_VARS = \
+ "INST_DRV=$(INST_DRV)" \
+ "INST_TOP=$(INST_TOP)" \
+ "INST_VER=$(INST_VER)" \
+ "archname=$(ARCHNAME)" \
+ "cc=$(CC)" \
+ "ccflags=$(OPTIMIZE) $(DEFINES) $(OBJECT)" \
+ "cf_email=$(EMAIL)" \
+ "d_crypt=$(D_CRYPT)" \
+ "d_mymalloc=$(PERL_MALLOC)" \
+ "libs=$(LIBFILES:f)" \
+ "incpath=$(CCINCDIR)" \
+ "libperl=$(PERLIMPLIB:f)" \
+ "libpth=$(strip $(CCLIBDIR) $(EXTRALIBDIRS) $(LIBFILES:d))" \
+ "libc=$(LIBC)" \
+ "make=dmake" \
+ "_o=$(o)" "obj_ext=$(o)" \
+ "_a=$(a)" "lib_ext=$(a)" \
+ "static_ext=$(STATIC_EXT)" \
+ "dynamic_ext=$(DYNAMIC_EXT)" \
+ "nonxs_ext=$(NONXS_EXT)" \
+ "usethreads=$(USE_THREADS)" \
+ "LINK_FLAGS=$(LINK_FLAGS)" \
+ "optimize=$(OPTIMIZE)"
#
# Top targets
#
-all: $(PERLEXE) $(PERL95EXE) $(GLOBEXE) $(DYNALOADMODULES) $(MINIMOD) $(GLOBBAT)
+all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) $(PERL95EXE) \
+ $(CAPILIB) $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
-$(DYNALOADER).obj : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
#------------------------------------------------------------
-$(GLOBEXE): perlglob.obj
+$(GLOBEXE) : perlglob$(o)
.IF "$(CCTYPE)" == "BORLAND"
$(CC) -c -w -v -tWM -I$(CCINCDIR) perlglob.c
- $(LINK32) -Tpe -ap $(LINK_FLAGS) c0x32.obj perlglob.obj \
- $(CCLIBDIR)\32BIT\wildargs.obj,$@,,import32.lib cw32mt.lib,
+ $(LINK32) -Tpe -ap $(LINK_FLAGS) c0x32$(o) perlglob$(o) \
+ $(CCLIBDIR)\32BIT\wildargs$(o),$@,,import32.lib cw32mt.lib,
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) $(LINK_FLAGS) -o $@ perlglob$(o) $(LIBFILES)
.ELSE
- $(LINK32) $(LINK_FLAGS) -out:$@ -subsystem:$(SUBSYS) perlglob.obj setargv.obj
+ $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
+ perlglob$(o) setargv$(o)
.ENDIF
-perlglob.bat : ..\lib\File\DosGlob.pm $(MINIPERL)
- $(MINIPERL) $(PL2BAT) - < ..\lib\File\DosGlob.pm > $(*B).bat
-
-perlglob.obj : perlglob.c
-
-..\miniperlmain.obj : ..\miniperlmain.c $(CORE_H)
+perlglob$(o) : perlglob.c
config.w32 : $(CFGSH_TMPL)
copy $(CFGSH_TMPL) config.w32
-.\config.h : $(CFGSH_TMPL)
+.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
-del /f config.h
copy $(CFGH_TMPL) config.h
..\config.sh : config.w32 $(MINIPERL) config_sh.PL
- $(MINIPERL) -I..\lib config_sh.PL "INST_DRV=$(INST_DRV)" \
- "INST_TOP=$(INST_TOP)" "cc=$(CC)" "ccflags=$(RUNTIME) -DWIN32" \
- "cf_email=$(EMAIL)" "libs=$(LIBFILES:f)" \
- "libpth=$(strip $(CCLIBDIR) $(LIBFILES:d))" "libc=$(LIBC)" \
- config.w32 > ..\config.sh
+ $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
+
+# this target is for when changes to the main config.sh happen
+# edit config.{b,v,g}c and make this target once for each supported
+# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
+regen_config_h:
+ perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
+ -cd .. && del /f perl.exe
+ cd .. && perl configpm
+ -del /f $(CFGH_TMPL)
+ -mkdir ..\lib\CORE
+ -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
+ rename config.h $(CFGH_TMPL)
$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
cd .. && miniperl configpm
if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
- $(XCOPY) ..\*.h ..\lib\CORE\*.*
- $(XCOPY) *.h ..\lib\CORE\*.*
- $(RCOPY) include ..\lib\CORE\*.*
- $(MINIPERL) -I..\lib config_h.PL || $(MAKE) CCTYPE=$(CCTYPE) \
- RUNTIME=$(RUNTIME) CFG=$(CFG) $(CONFIGPM)
-
-$(MINIPERL) : ..\miniperlmain.obj $(CORE_OBJ) $(WIN32_OBJ)
+ $(XCOPY) ..\*.h $(COREDIR)\*.*
+ $(XCOPY) *.h $(COREDIR)\*.*
+ $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
+ $(RCOPY) include $(COREDIR)\*.*
+ $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
+ || $(MAKE) $(MAKEMACROS) $(CONFIGPM)
+
+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpe -ap $(LINK_FLAGS) \
- @$(mktmp c0x32.obj ..\miniperlmain.obj \
- $(CORE_OBJ:s,\,\\) $(WIN32_OBJ:s,\,\\),$@,,$(LIBFILES),)
+ @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -v -o $@ $(LINK_FLAGS) \
+ $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
.ELSE
$(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(LINK_FLAGS) ..\miniperlmain.obj \
- $(CORE_OBJ:s,\,\\) $(WIN32_OBJ:s,\,\\))
+ @$(mktmp $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
.ENDIF
-$(WIN32_OBJ) : $(CORE_H)
-$(CORE_OBJ) : $(CORE_H)
-$(DLL_OBJ) : $(CORE_H)
+$(MINIDIR) :
+ if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
+
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)
+ $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ ..\$(*B).c
+
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
+ $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
-perldll.def : $(MINIPERL) $(CONFIGPM)
- $(MINIPERL) -w makedef.pl $(CCTYPE) > perldll.def
+# 1. we don't want to rebuild miniperl.exe when config.h changes
+# 2. we don't want to rebuild miniperl.exe with non-default config.h
+$(MINI_OBJ) : $(CORE_NOCFG_H)
-$(PERLDLL): perldll.def $(CORE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
+$(WIN32_OBJ) : $(CORE_H)
+$(CORE_OBJ) : $(CORE_H)
+$(DLL_OBJ) : $(CORE_H)
+$(PERL95_OBJ) : $(CORE_H)
+$(X2P_OBJ) : $(CORE_H)
+
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym makedef.pl
+ $(MINIPERL) -w makedef.pl $(OPTIMIZE) $(DEFINES) $(OBJECT) \
+ CCTYPE=$(CCTYPE) > perldll.def
+
+$(PERLDLL): perldll.def $(PERLDLL_OBJ)
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpd -ap $(LINK_FLAGS) \
- @$(mktmp c0d32.obj $(CORE_OBJ:s,\,\\) \
- $(WIN32_OBJ:s,\,\\) $(DLL_OBJ:s,\,\\)\n \
+ @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
$@,\n \
$(LIBFILES)\n \
perldll.def\n)
$(IMPLIB) $*.lib $@
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(LINK_FLAGS) \
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+ dlltool --output-lib $(PERLIMPLIB) \
+ --dllname perl.dll \
+ --def perldll.def \
+ --base-file perl.base \
+ --output-exp perl.exp
+ $(LINK32) -mdll -o $@ $(LINK_FLAGS) \
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
+ perl.exp $(LKPOST))
.ELSE
$(LINK32) -dll -def:perldll.def -out:$@ \
- @$(mktmp $(LINK_FLAGS) $(CORE_OBJ:s,\,\\) \
- $(WIN32_OBJ:s,\,\\) $(DLL_OBJ:s,\,\\))
+ @$(mktmp $(LINK_FLAGS) $(LIBFILES) $(PERLDLL_OBJ:s,\,\\))
.ENDIF
- $(XCOPY) $(PERLIMPLIB) ..\lib\CORE
+ $(XCOPY) $(PERLIMPLIB) $(COREDIR)
perl.def : $(MINIPERL) makeperldef.pl
$(MINIPERL) -I..\lib makeperldef.pl $(NULL) > perl.def
$(MINIMOD) : $(MINIPERL) ..\minimod.pl
cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
+..\x2p\a2p$(o) : ..\x2p\a2p.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
+
+..\x2p\hash$(o) : ..\x2p\hash.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
+
+..\x2p\str$(o) : ..\x2p\str.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
+
+..\x2p\util$(o) : ..\x2p\util.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
+
+..\x2p\walk$(o) : ..\x2p\walk.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
+
+$(X2P) : $(MINIPERL) $(X2P_OBJ)
+ $(MINIPERL) ..\x2p\find2perl.PL
+ $(MINIPERL) ..\x2p\s2p.PL
+.IF "$(CCTYPE)" == "BORLAND"
+ $(LINK32) -Tpe -ap $(LINK_FLAGS) \
+ @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -v -o $@ $(LINK_FLAGS) \
+ $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+.ELSE
+ $(LINK32) -subsystem:console -out:$@ \
+ @$(mktmp $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
+.ENDIF
+
perlmain.c : runperl.c
copy runperl.c perlmain.c
-perlmain.obj : perlmain.c
- $(CC) $(CFLAGS) -UPERLDLL -c perlmain.c
-
+perlmain$(o) : perlmain.c
+ $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) perlmain.obj
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ)
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpe -ap $(LINK_FLAGS) \
- @$(mktmp c0x32.obj perlmain.obj $(WINIOMAYBE)\n \
- $@,\n \
+ @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
+ $(@:s,\,\\),\n \
$(PERLIMPLIB) $(LIBFILES)\n)
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -o $@ $(LINK_FLAGS) \
+ $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
.ELSE
- $(LINK32) -subsystem:console -out:perl.exe $(LINK_FLAGS) \
- perlmain.obj $(WINIOMAYBE) $(PERLIMPLIB)
- copy perl.exe $@
- del perl.exe
+ $(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) $(LIBFILES) \
+ $(PERLEXE_OBJ) $(PERLIMPLIB)
.ENDIF
copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" "../LIB/auto"
- attrib -r ..\t\*.*
- copy test ..\t
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
.IF "$(CCTYPE)" != "BORLAND"
+.IF "$(CCTYPE)" != "GCC"
+.IF "$(USE_PERLCRT)" == ""
perl95.c : runperl.c
copy runperl.c perl95.c
-perl95.obj : perl95.c
- $(CC) $(CFLAGS) -MT -UPERLDLL -c perl95.c
+perl95$(o) : perl95.c
+ $(CC) $(CFLAGS_O) -MT -UPERLDLL -DWIN95FIX -c perl95.c
+
+win32sckmt$(o) : win32sck.c
+ $(CC) $(CFLAGS_O) -MT -UPERLDLL -DWIN95FIX -c \
+ $(OBJOUT_FLAG)win32sckmt$(o) win32sck.c
-win32iomt.obj : win32io.c
- $(CC) $(CFLAGS) -MT -c $(OBJOUT_FLAG)win32iomt.obj win32io.c
+win32mt$(o) : win32.c
+ $(CC) $(CFLAGS_O) -MT -UPERLDLL -DWIN95FIX -c \
+ $(OBJOUT_FLAG)win32mt$(o) win32.c
-$(PERL95EXE): $(PERLDLL) $(CONFIGPM) perl95.obj win32iomt.obj
- $(LINK32) -subsystem:console -out:perl95.exe $(LINK_FLAGS) \
- perl95.obj win32iomt.obj $(PERLIMPLIB)
- copy perl95.exe $@
- del perl95.exe
+DynaLoadmt$(o) : $(DYNALOADER).c
+ $(CC) $(CFLAGS_O) -MT -UPERLDLL -DWIN95FIX -c \
+ $(OBJOUT_FLAG)DynaLoadmt$(o) $(DYNALOADER).c
+$(PERL95EXE): $(PERLDLL) $(CONFIGPM) $(PERL95_OBJ)
+ $(LINK32) -subsystem:console -nodefaultlib -out:$@ $(LINK_FLAGS) \
+ $(LIBBASEFILES) $(PERL95_OBJ) $(PERLIMPLIB) libcmt.lib
+
+.ENDIF
+.ENDIF
.ENDIF
$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
- if not exist ..\lib\auto mkdir ..\lib\auto
+ if not exist $(AUTODIR) mkdir $(AUTODIR)
+ cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
$(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
+.IF "$(OBJECT)" == "-DPERL_OBJECT"
+
+PerlCAPI.cpp : $(MINIPERL)
+ $(MINIPERL) GenCAPI.pl $(COREDIR)
+
+PerlCAPI$(o) : PerlCAPI.cpp
+.IF "$(CCTYPE)" == "BORLAND"
+ $(CC) $(CFLAGS_O) -c $(OBJOUT_FLAG)PerlCAPI$(o) PerlCAPI.cpp
+.ELIF "$(CCTYPE)" == "GCC"
+ $(CC) $(CFLAGS_O) -c $(OBJOUT_FLAG)PerlCAPI$(o) PerlCAPI.cpp
+.ELSE
+ $(CC) $(CFLAGS_O) $(RUNTIME) -UPERLDLL -c \
+ $(OBJOUT_FLAG)PerlCAPI$(o) PerlCAPI.cpp
+.ENDIF
+
+$(CAPILIB) : PerlCAPI.cpp PerlCAPI$(o)
+.IF "$(CCTYPE)" == "BORLAND"
+ $(LIB32) $(LIBOUT_FLAG)$(CAPILIB) +PerlCAPI$(o)
+.ELSE
+ $(LIB32) $(LIBOUT_FLAG)$(CAPILIB) PerlCAPI$(o)
+.ENDIF
+
+.ENDIF
+
$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-$(IO_DLL): $(PERLEXE) $(CONFIGPM) $(IO).xs
+$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
+ cd $(EXTDIR)\Data\$(*B) && \
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\Data\$(*B) && $(MAKE)
+
+$(RE_DLL): $(PERLEXE) $(RE).xs
+ cd $(EXTDIR)\$(*B) && \
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\$(*B) && $(MAKE)
+
+$(B_DLL): $(PERLEXE) $(B).xs
+ cd $(EXTDIR)\$(*B) && \
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\$(*B) && $(MAKE)
+
+$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
+ cd $(EXTDIR)\$(*B) && \
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\$(*B) && $(MAKE)
+
+$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
+ cd $(EXTDIR)\$(*B) && \
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\$(*B) && $(MAKE)
+
+$(POSIX_DLL): $(PERLEXE) $(POSIX).xs
+ cd $(EXTDIR)\$(*B) && \
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\$(*B) && $(MAKE)
+
+$(IO_DLL): $(PERLEXE) $(IO).xs
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
-$(SOCKET_DLL): $(SOCKET).xs $(PERLEXE)
+$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
+ cd $(EXTDIR)\$(*B) && \
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\$(*B) && $(MAKE)
+
+$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
doc: $(PERLEXE)
copy ..\README.win32 ..\pod\perlwin32.pod
- $(PERLEXE) ..\installhtml --podroot=.. --htmldir=./html \
- --podpath=pod:lib:ext:utils --htmlroot="//$(INST_HTML:s,:,|,)" \
+ $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
+ --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
--libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
-utils: $(PERLEXE)
+utils: $(PERLEXE) $(X2P)
cd ..\utils && $(MAKE) PERL=$(MINIPERL)
- cd ..\utils && $(PERLEXE) ..\win32\$(PL2BAT) h2ph splain perlbug \
- pl2pm c2ph h2xs perldoc pstruct
- cd ..\utils && $(XCOPY) *.bat ..\win32\bin\*.*
+ cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
+ $(PERLEXE) $(PL2BAT) $(UTILS)
distclean: clean
- -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
- $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
+ -del /f $(MINIPERL) $(PERLEXE) $(PERL95EXE) $(PERLDLL) $(GLOBEXE) \
+ $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
-del /f *.def *.map
- -del /f $(SOCKET_DLL) $(IO_DLL) $(SDBM_FILE_DLL) $(FCNTL_DLL) \
- $(OPCODE_DLL)
- -del /f $(SOCKET).c $(IO).c $(SDBM_FILE).c $(FCNTL).c $(OPCODE).c \
- $(DYNALOADER).c
+ -del /f $(EXTENSION_DLL) $(EXTENSION_PM)
+ -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
+ -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
+ -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
+ -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
+ -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
+ -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
+ -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
+ -del /f $(LIBDIR)\Data\Dumper.pm
+ -rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
+ -rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
+ -rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
+ -rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
-del /f $(PODDIR)\*.html
-del /f $(PODDIR)\*.bat
- -cd $(EXTDIR) && del /s *.lib *.def *.map *.bs Makefile *.obj pm_to_blib
- -rmdir /s /q ..\lib\auto
- -rmdir /s /q ..\lib\CORE
-
-install : all doc utils
- if not exist $(INST_TOP) mkdir $(INST_TOP)
- echo I $(INST_TOP) L $(LIBDIR)
- $(XCOPY) $(PERLEXE) $(INST_BIN)\*.*
+ -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc pstruct *.bat
+ -cd ..\x2p && del /f find2perl s2p *.bat
+ -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
+ -del /f $(CONFIGPM)
+.IF "$(PERL95EXE)" != ""
+ -del /f perl95.c
+.ENDIF
+ -del /f bin\*.bat
+ -cd $(EXTDIR) && del /s *$(a) *.def *.map *.bs Makefile *$(o) pm_to_blib
+ -rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
+ -rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
+
+install : all installbare installhtml
+
+installbare : utils
+ $(PERLEXE) ..\installperl
.IF "$(PERL95EXE)" != ""
$(XCOPY) $(PERL95EXE) $(INST_BIN)\*.*
.ENDIF
$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
- $(XCOPY) $(GLOBBAT) $(INST_BIN)\*.*
- $(XCOPY) $(PERLDLL) $(INST_BIN)\*.*
- $(XCOPY) bin\*.* $(INST_BIN)\*.*
- $(RCOPY) ..\lib $(INST_LIB)\*.*
- $(XCOPY) ..\pod\*.bat $(INST_BIN)\*.*
- $(XCOPY) ..\pod\*.pod $(INST_POD)\*.*
+ $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
+ $(XCOPY) bin\network.pl $(INST_LIB)\*.*
+
+installhtml : doc
$(RCOPY) html\*.* $(INST_HTML)\*.*
inst_lib : $(CONFIGPM)
copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" "../LIB/auto"
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
$(RCOPY) ..\lib $(INST_LIB)\*.*
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM)
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
$(XCOPY) $(MINIPERL) ..\t\perl.exe
.IF "$(CCTYPE)" == "BORLAND"
$(XCOPY) $(GLOBBAT) ..\t\$(NULL)
cd ..\t && \
$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
-test : all
+test-prep : all utils
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
$(XCOPY) $(PERLDLL) ..\t\$(NULL)
.IF "$(CCTYPE)" == "BORLAND"
.ELSE
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
.ENDIF
+
+test : test-prep
cd ..\t && $(PERLEXE) -I..\lib harness
+test-notty : test-prep
+ set PERL_SKIP_TTY_TEST=1 && \
+ cd ..\t && $(PERLEXE) -I.\lib harness
+
clean :
- -@erase miniperlmain.obj
+ -@erase miniperlmain$(o)
-@erase $(MINIPERL)
- -@erase perlglob.obj
- -@erase perlmain.obj
+ -@erase perlglob$(o)
+ -@erase perlmain$(o)
+ -@erase PerlCAPI.cpp
-@erase config.w32
-@erase /f config.h
-@erase $(GLOBEXE)
-@erase $(PERLEXE)
-@erase $(PERLDLL)
-@erase $(CORE_OBJ)
+ -rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
-@erase $(WIN32_OBJ)
-@erase $(DLL_OBJ)
- -@erase ..\*.obj *.obj ..\*.lib ..\*.exp
+ -@erase $(X2P_OBJ)
+ -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp
+ -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
+ -@erase ..\x2p\*.exe ..\x2p\*.bat
-@erase *.ilk
-@erase *.pdb
-
-
https://perl5.git.perl.org / perl5.git / blobdiff