# comp.sources.misc and is available on CPAN under authors/id/RAM so
# you may fetch it yourself from your nearest archive site.)
#
+#
+# Though this script was generated by metaconfig, it is OK to send
+# patches against it. It's up to the Configure pumpkin to backport
+# the patch to the metaunits if it is accepted.
+# See Porting/pumpkin.pod for more information on metaconfig.
+#
# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Sat Oct 30 18:24:58 METDST 2004 [metaconfig 3.0 PL70]
+# Generated on Tue Jun 6 20:32:43 CEST 2006 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by perlbug@perl.org)
cat >c1$$ <<EOF
baserev=''
bin=''
binexp=''
+initialinstalllocation=''
installbin=''
+userelocatableinc=''
byteorder=''
cc=''
ccflags=''
d_alarm=''
asctime_r_proto=''
d_asctime_r=''
-d_attribut=''
+d_attribute_format=''
+d_attribute_malloc=''
+d_attribute_nonnull=''
+d_attribute_noreturn=''
+d_attribute_pure=''
+d_attribute_unused=''
+d_attribute_warn_unused_result=''
d_bcmp=''
d_bcopy=''
+d_builtin_choose_expr=''
+d_builtin_expect=''
d_bzero=''
+d_c99_variadic_macros=''
d_casti32=''
castflags=''
d_castneg=''
d_chroot=''
d_chsize=''
d_class=''
+d_clearenv=''
d_closedir=''
d_void_closedir=''
d_cmsghdr_s=''
d_ftello=''
d_ftime=''
d_gettimeod=''
+d_futimes=''
d_Gconvert=''
d_getcwd=''
d_getespwnam=''
d_killpg=''
d_lchown=''
d_ldbl_dig=''
+d_libm_lib_version=''
d_link=''
d_localtime_r=''
localtime_r_proto=''
d_lseekproto=''
d_lstat=''
d_madvise=''
+d_malloc_good_size=''
+d_malloc_size=''
d_mblen=''
d_mbstowcs=''
d_mbtowc=''
d_sigaction=''
d_sigprocmask=''
d_sigsetjmp=''
+usesitecustomize=''
+d_snprintf=''
+d_vsnprintf=''
d_sockatmark=''
d_sockatmarkproto=''
d_msg_ctrunc=''
socketlib=''
d_socklen_t=''
d_socks5_init=''
+d_sprintf_returns_strlen=''
d_sqrtl=''
d_srand48_r=''
srand48_r_proto=''
d_semctl_semun=''
d_union_semun=''
d_unordered=''
+d_unsetenv=''
d_usleep=''
d_usleepproto=''
d_ustat=''
i_varargs=''
i_varhdr=''
i_vfork=''
+d_inc_version_list=''
inc_version_list=''
inc_version_list_init=''
installprefix=''
sSCNfldbl=''
lseeksize=''
lseektype=''
+mad=''
+madlyh=''
+madlyobj=''
+madlysrc=''
make_set_make=''
d_mymalloc=''
freetype=''
perladmin=''
perlpath=''
d_nv_preserves_uv=''
+d_nv_zero_is_allbits_zero=''
i16size=''
i16type=''
i32size=''
sig_num=''
sig_num_init=''
sig_size=''
+d_sitearch=''
installsitearch=''
sitearch=''
sitearchexp=''
: no include file wanted by default
inclwanted=''
+: Enable -DEBUGGING and -DDEBUGGING from the command line
+EBUGGING=''
+DEBUGGING=old
+
groupstype=''
libnames=''
: change the next line if compiling for Xenix/286 on Xenix/386
domainos) osname=apollo
osvers="$3"
;;
- dgux) osname=dgux
+ dgux) osname=dgux
+ osvers="$3"
+ ;;
+ dragonfly) osname=dragonfly
osvers="$3"
;;
dynixptx*) osname=dynixptx
osvers=`echo "$4"|sed 's/^v//'`
;;
- freebsd) osname=freebsd
+ freebsd) osname=freebsd
osvers="$3" ;;
genix) osname=genix ;;
gnu) osname=gnu
osvers="$3" ;;
- hp*) osname=hpux
+ hp*) osname=hpux
osvers=`echo "$3" | $sed 's,.*\.\([0-9]*\.[0-9]*\),\1,'`
;;
irix*) osname=irix
*freebsd*) ;;
svr*)
: svr4.x or possibly later
- case "svr$3" in
+ case "svr$3" in
${osname}*)
osname=svr$3
osvers=$4
osvers="$5"
fi
fi
-
+
case "$targetarch" in
'') ;;
*) hostarch=$osname
$cat <<EOM
You may give one or more space-separated answers, or "none" if appropriate.
-A well-behaved OS will have no hints, so answering "none" or just "Policy"
-is a good thing. DO NOT give a wrong version or a wrong OS.
+If you have a handcrafted Policy.sh file or a Policy.sh file generated by a
+previous run of Configure, you may specify it as well as or instead of
+OS-specific hints. If hints are provided for your OS, you should use them:
+although Perl can probably be built without hints on many platforms, using
+hints often improve performance and may enable features that Configure can't
+set up on its own. If there are no hints that match your OS, specify "none";
+DO NOT give a wrong version or a wrong OS.
EOM
esac ;;
esac
-: set up the script used to warn in case of inconsistency
-cat <<EOS >whoa
-$startsh
-EOS
-cat <<'EOSC' >>whoa
-dflt=y
-echo " "
-echo "*** WHOA THERE!!! ***" >&4
-echo " The $hint value for \$$var on this machine was \"$was\"!" >&4
-rp=" Keep the $hint value?"
-. ./myread
-case "$ans" in
-y) td=$was; tu=$was;;
+: decide how portable to be. Allow command line overrides.
+case "$d_portable" in
+"$undef") ;;
+*) d_portable="$define" ;;
esac
-EOSC
-
-: function used to set $1 to $val
-setvar='var=$1; eval "was=\$$1"; td=$define; tu=$undef;
-case "$val$was" in
-$define$undef) . ./whoa; eval "$var=\$td";;
-$undef$define) . ./whoa; eval "$var=\$tu";;
-*) eval "$var=$val";;
-esac'
-case "$usesocks" in
-$define|true|[yY]*) dflt='y';;
-*) dflt='n';;
+: set up shell script to do ~ expansion
+cat >filexp <<EOSS
+$startsh
+: expand filename
+case "\$1" in
+ ~/*|~)
+ echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
+ ;;
+ ~*)
+ if $test -f /bin/csh; then
+ /bin/csh -f -c "glob \$1"
+ failed=\$?
+ echo ""
+ exit \$failed
+ else
+ name=\`$expr x\$1 : '..\([^/]*\)'\`
+ dir=\`$sed -n -e "/^\${name}:/{s/^[^:]*:[^:]*:[^:]*:[^:]*:[^:]*:\([^:]*\).*"'\$'"/\1/" -e p -e q -e '}' </etc/passwd\`
+ if $test ! -d "\$dir"; then
+ me=\`basename \$0\`
+ echo "\$me: can't locate home directory for: \$name" >&2
+ exit 1
+ fi
+ case "\$1" in
+ */*)
+ echo \$dir/\`$expr x\$1 : '..[^/]*/\(.*\)'\`
+ ;;
+ *)
+ echo \$dir
+ ;;
+ esac
+ fi
+ ;;
+*)
+ echo \$1
+ ;;
esac
-cat <<EOM
-
-Perl can be built to use the SOCKS proxy protocol library. To do so,
-Configure must be run with -Dusesocks. If you use SOCKS you also need
-to use the PerlIO abstraction layer, this will be implicitly selected.
+EOSS
+chmod +x filexp
+$eunicefix filexp
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Build Perl for SOCKS?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
+: now set up to get a file name
+cat <<EOS >getfile
+$startsh
+EOS
+cat <<'EOSC' >>getfile
+tilde=''
+fullpath=''
+already=''
+skip=''
+none_ok=''
+exp_file=''
+nopath_ok=''
+orig_rp="$rp"
+orig_dflt="$dflt"
+case "$gfpth" in
+'') gfpth='.' ;;
esac
-set usesocks
-eval $setvar
-case "$usesocks" in
-$define|true|[yY]*) useperlio="$define";;
+case "$fn" in
+*\(*)
+ : getfile will accept an answer from the comma-separated list
+ : enclosed in parentheses even if it does not meet other criteria.
+ expr "$fn" : '.*(\(.*\)).*' | $tr ',' $trnl >getfile.ok
+ fn=`echo $fn | sed 's/(.*)//'`
+ ;;
esac
-case "$useperlio" in
-$define|true|[yY]*|'') dflt='y';;
-*) dflt='n';;
+case "$fn" in
+*:*)
+ loc_file=`expr $fn : '.*:\(.*\)'`
+ fn=`expr $fn : '\(.*\):.*'`
+ ;;
esac
-cat <<EOM
-
-Previous version of $package used the standard IO mechanisms as
-defined in <stdio.h>. Versions 5.003_02 and later of $package allow
-alternate IO mechanisms via the PerlIO abstraction layer, but the
-stdio mechanism is still available if needed. The abstraction layer
-can use AT&T's sfio (if you already have sfio installed) or regular stdio.
-Using PerlIO with sfio may cause problems with some extension modules.
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Use the PerlIO abstraction layer?'
-. ./myread
-case "$ans" in
-y|Y)
- val="$define"
- ;;
-*)
- echo "Ok, doing things the stdio way."
- val="$undef"
- ;;
+case "$fn" in
+*~*) tilde=true;;
+esac
+case "$fn" in
+*/*) fullpath=true;;
+esac
+case "$fn" in
+*+*) skip=true;;
+esac
+case "$fn" in
+*n*) none_ok=true;;
+esac
+case "$fn" in
+*e*) exp_file=true;;
+esac
+case "$fn" in
+*p*) nopath_ok=true;;
esac
-set useperlio
-eval $setvar
-case "$usesocks" in
-$define|true|[yY]*)
- case "$useperlio" in
- $define|true|[yY]*) ;;
- *) cat >&4 <<EOM
+case "$fn" in
+*f*) type='File';;
+*d*) type='Directory';;
+*l*) type='Locate';;
+esac
-You are using the SOCKS proxy protocol library which means that you
-should also use the PerlIO layer. You may be headed for trouble.
+what="$type"
+case "$what" in
+Locate) what='File';;
+esac
-EOM
- ;;
+case "$exp_file" in
+'')
+ case "$d_portable" in
+ "$define") ;;
+ *) exp_file=true;;
esac
;;
esac
-
-case "$usethreads" in
-$define|true|[yY]*) dflt='y';;
-*) # Catch case where user specified ithreads or 5005threads but
- # forgot -Dusethreads (A.D. 4/2002)
- case "$useithreads$use5005threads" in
- *$define*)
- case "$useperlio" in
- "$define") dflt='y' ;;
- *) dflt='n' ;;
+cd ..
+while test "$type"; do
+ redo=''
+ rp="$orig_rp"
+ dflt="$orig_dflt"
+ case "$tilde" in
+ true) rp="$rp (~name ok)";;
+ esac
+ . UU/myread
+ if test -f UU/getfile.ok && \
+ $contains "^$ans\$" UU/getfile.ok >/dev/null 2>&1
+ then
+ value="$ans"
+ ansexp="$ans"
+ break
+ fi
+ case "$ans" in
+ none)
+ value=''
+ ansexp=''
+ case "$none_ok" in
+ true) type='';;
+ esac
+ ;;
+ *)
+ case "$tilde" in
+ '') value="$ans"
+ ansexp="$ans";;
+ *)
+ value=`UU/filexp $ans`
+ case $? in
+ 0)
+ if test "$ans" != "$value"; then
+ echo "(That expands to $value on this system.)"
+ fi
+ ;;
+ *) value="$ans";;
+ esac
+ ansexp="$value"
+ case "$exp_file" in
+ '') value="$ans";;
+ esac
+ ;;
+ esac
+ case "$fullpath" in
+ true)
+ case "$ansexp" in
+ /*) value="$ansexp" ;;
+ [a-zA-Z]:/*) value="$ansexp" ;;
+ *)
+ redo=true
+ case "$already" in
+ true)
+ echo "I shall only accept a full path name, as in /bin/ls." >&4
+ echo "Use a ! shell escape if you wish to check pathnames." >&4
+ ;;
+ *)
+ echo "Please give a full path name, starting with slash." >&4
+ case "$tilde" in
+ true)
+ echo "Note that using ~name is ok provided it expands well." >&4
+ already=true
+ ;;
+ esac
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ case "$redo" in
+ '')
+ case "$type" in
+ File)
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ pf="$ansexp"
+ else
+ pf="$fp/$ansexp"
+ fi
+ if test -f "$pf"; then
+ type=''
+ elif test -r "$pf" || (test -h "$pf") >/dev/null 2>&1
+ then
+ echo "($value is not a plain file, but that's ok.)"
+ type=''
+ fi
+ if test X"$type" = X; then
+ value="$pf"
+ break
+ fi
+ done
+ ;;
+ Directory)
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ dir="$ans"
+ direxp="$ansexp"
+ else
+ dir="$fp/$ansexp"
+ direxp="$fp/$ansexp"
+ fi
+ if test -d "$direxp"; then
+ type=''
+ value="$dir"
+ break
+ fi
+ done
+ ;;
+ Locate)
+ if test -d "$ansexp"; then
+ echo "(Looking for $loc_file in directory $value.)"
+ value="$value/$loc_file"
+ ansexp="$ansexp/$loc_file"
+ fi
+ if test -f "$ansexp"; then
+ type=''
+ fi
+ case "$nopath_ok" in
+ true) case "$value" in
+ */*) ;;
+ *) echo "Assuming $value will be in people's path."
+ type=''
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+
+ case "$skip" in
+ true) type='';
+ esac
+
+ case "$type" in
+ '') ;;
+ *)
+ if test "$fastread" = yes; then
+ dflt=y
+ else
+ dflt=n
+ fi
+ rp="$what $value doesn't exist. Use that name anyway?"
+ . UU/myread
+ dflt=''
+ case "$ans" in
+ y*) type='';;
+ *) echo " ";;
+ esac
+ ;;
+ esac
+ ;;
esac
;;
- *) dflt='n';;
- esac
- ;;
-esac
-cat <<EOM
-
-Perl can be built to take advantage of threads on some systems.
-To do so, Configure can be run with -Dusethreads.
-
-Note that Perl built with threading support runs slightly slower
-and uses more memory than plain Perl. The current implementation
-is believed to be stable, but it is fairly new, and so should be
-treated with caution.
-
-If this doesn't make any sense to you, just accept the default '$dflt'.
-EOM
-rp='Build a threading Perl?'
-. ./myread
-case "$ans" in
-y|Y) val="$define" ;;
-*) val="$undef" ;;
-esac
-set usethreads
-eval $setvar
-
-case "$usethreads" in
-$define)
- $cat <<EOM
-
-Since release 5.6, Perl has had two different threading implementations,
-the newer interpreter-based version (ithreads) with one interpreter per
-thread, and the older 5.005 version (5005threads).
-The 5005threads version is effectively unmaintained and will probably be
-removed in Perl 5.10, so there should be no need to build a Perl using it
-unless needed for backwards compatibility with some existing 5.005threads
-code.
-
-EOM
- : Default to ithreads unless overridden on command line or with
- : old config.sh
- dflt='y'
- case "$use5005threads" in
- $define|true|[yY]*) dflt='n';;
- esac
- case "$useithreads" in
- $undef|false|[nN]*) dflt='n';;
- esac
- rp='Use the newer interpreter-based ithreads?'
- . ./myread
- case "$ans" in
- y|Y) val="$define" ;;
- *) val="$undef" ;;
- esac
- set useithreads
- eval $setvar
- : Now set use5005threads to the opposite value.
- case "$useithreads" in
- $define) val="$undef" ;;
- *) val="$define" ;;
esac
- set use5005threads
- eval $setvar
+done
+cd UU
+ans="$value"
+rp="$orig_rp"
+dflt="$orig_dflt"
+rm -f getfile.ok
+test "X$gfpthkeep" != Xy && gfpth=""
+EOSC
+
+: determine root of directory hierarchy where package will be installed.
+case "$prefix" in
+'')
+ dflt=`./loc . /usr/local /usr/local /local /opt /usr`
+ ;;
+*?/)
+ dflt=`echo "$prefix" | sed 's/.$//'`
;;
*)
- useithreads="$undef"
- use5005threads="$undef"
+ dflt="$prefix"
;;
esac
+$cat <<EOM
-case "$useithreads$use5005threads" in
-"$define$define")
- $cat >&4 <<EOM
-
-You cannot have both the ithreads and the 5.005 threads enabled
-at the same time. Disabling the 5.005 threads since they are
-much less stable than the ithreads.
+By default, $package will be installed in $dflt/bin, manual pages
+under $dflt/man, etc..., i.e. with $dflt as prefix for all
+installation directories. Typically this is something like /usr/local.
+If you wish to have binaries under /usr/bin but other parts of the
+installation under /usr/local, that's ok: you will be prompted
+separately for each of the installation directories, the prefix being
+only used to set the defaults.
EOM
- use5005threads="$undef"
+fn=d~
+rp='Installation prefix to use?'
+. ./getfile
+oldprefix=''
+case "$prefix" in
+'') ;;
+*)
+ case "$ans" in
+ "$prefix") ;;
+ *) oldprefix="$prefix";;
+ esac
;;
esac
+prefix="$ans"
+prefixexp="$ansexp"
-if test X"$usethreads" = "X$define" -a "X$useperlio" = "Xundef"; then
- cat >&4 <<EOF
-***
-*** To build with ithreads you must also use the PerlIO layer.
-*** Cannot continue, aborting.
-***
-EOF
- exit 1
-fi
-
-case "$d_oldpthreads" in
-'') : Configure tests would be welcome here. For now, assume undef.
- val="$undef" ;;
-*) val="$d_oldpthreads" ;;
+case "$afsroot" in
+'') afsroot=/afs ;;
+*) afsroot=$afsroot ;;
esac
-set d_oldpthreads
-eval $setvar
-
-: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that a threading perl is to be built,
-: we may need to set or change some other defaults.
-if $test -f usethreads.cbu; then
- echo "Your platform has some specific hints regarding threaded builds, using them..."
- . ./usethreads.cbu
-else
- case "$usethreads" in
- "$define"|true|[yY]*)
- $cat <<EOM
-(Your platform does not have any specific hints for threaded builds.
- Assuming POSIX threads, then.)
-EOM
+: is AFS running?
+echo " "
+case "$afs" in
+$define|true) afs=true ;;
+$undef|false) afs=false ;;
+*) if test -d $afsroot; then
+ afs=true
+ else
+ afs=false
+ fi
;;
- esac
+esac
+if $afs; then
+ echo "AFS may be running... I'll be extra cautious then..." >&4
+else
+ echo "AFS does not seem to be running..." >&4
fi
-cat <<EOM
+: determine installation prefix for where package is to be installed.
+if $afs; then
+$cat <<EOM
-Perl can be built so that multiple Perl interpreters can coexist
-within the same Perl executable.
-EOM
+Since you are running AFS, I need to distinguish the directory in which
+files will reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
-case "$useithreads" in
-$define)
- cat <<EOM
-This multiple interpreter support is required for interpreter-based threads.
EOM
- val="$define"
- ;;
-*) case "$usemultiplicity" in
- $define|true|[yY]*) dflt='y';;
- *) dflt='n';;
+ case "$installprefix" in
+ '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installprefix";;
esac
- echo " "
- echo "If this doesn't make any sense to you, just accept the default '$dflt'."
- rp='Build Perl for multiplicity?'
- . ./myread
- case "$ans" in
- y|Y) val="$define" ;;
- *) val="$undef" ;;
+else
+$cat <<EOM
+
+In some special cases, particularly when building $package for distribution,
+it is convenient to distinguish the directory in which files should be
+installed from the directory ($prefix) in which they will
+eventually reside. For most users, these two directories are the same.
+
+EOM
+ case "$installprefix" in
+ '') dflt=$prefix ;;
+ *) dflt=$installprefix;;
esac
- ;;
+fi
+fn=d~
+rp='What installation prefix should I use for installing files?'
+. ./getfile
+installprefix="$ans"
+installprefixexp="$ansexp"
+
+: Perform the prefixexp/installprefixexp correction if necessary
+cat <<EOS >installprefix
+$startsh
+EOS
+cat <<'EOSC' >>installprefix
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ eval "install${prefixvar}=\`echo \$${prefixvar}exp | sed \"s#^\$prefixexp#\$installprefixexp#\"\`"
+else
+ eval "install${prefixvar}=\"\$${prefixvar}exp\""
+fi
+EOSC
+chmod +x installprefix
+$eunicefix installprefix
+
+: Set variables such as privlib and privlibexp from the output of ./getfile
+: performing the prefixexp/installprefixexp correction if necessary.
+cat <<EOS >setprefixvar
+$startsh
+EOS
+cat <<'EOSC' >>setprefixvar
+eval "${prefixvar}=\"\$ans\""
+eval "${prefixvar}exp=\"\$ansexp\""
+. ./installprefix
+EOSC
+chmod +x setprefixvar
+$eunicefix setprefixvar
+
+: set up the script used to warn in case of inconsistency
+cat <<EOS >whoa
+$startsh
+EOS
+cat <<'EOSC' >>whoa
+dflt=y
+echo " "
+echo "*** WHOA THERE!!! ***" >&4
+echo " The $hint value for \$$var on this machine was \"$was\"!" >&4
+rp=" Keep the $hint value?"
+. ./myread
+case "$ans" in
+y) td=$was; tu=$was;;
esac
-set usemultiplicity
+EOSC
+
+: function used to set $1 to $val
+setvar='var=$1; eval "was=\$$1"; td=$define; tu=$undef;
+case "$val$was" in
+$define$undef) . ./whoa; eval "$var=\$td";;
+$undef$define) . ./whoa; eval "$var=\$tu";;
+*) eval "$var=$val";;
+esac'
+
+case "$usesocks" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+cat <<EOM
+
+Perl can be built to use the SOCKS proxy protocol library. To do so,
+Configure must be run with -Dusesocks. If you use SOCKS you also need
+to use the PerlIO abstraction layer, this will be implicitly selected.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Build Perl for SOCKS?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set usesocks
eval $setvar
+case "$usesocks" in
+$define|true|[yY]*) useperlio="$define";;
+esac
-case "$usemorebits" in
-"$define"|true|[yY]*)
- use64bitint="$define"
- uselongdouble="$define"
- usemorebits="$define"
- ;;
-*) usemorebits="$undef"
- ;;
+case "$useperlio" in
+$define|true|[yY]*|'') dflt='y';;
+*) dflt='n';;
esac
+cat <<EOM
-: make some quick guesses about what we are up against
-echo " "
-$echo $n "Hmm... $c"
-echo exit 1 >bsd
-echo exit 1 >usg
-echo exit 1 >v7
-echo exit 1 >osf1
-echo exit 1 >eunice
-echo exit 1 >xenix
-echo exit 1 >venix
-echo exit 1 >os2
-d_bsd="$undef"
-$cat /usr/include/signal.h /usr/include/sys/signal.h >foo 2>/dev/null
-if test -f /osf_boot || $contains 'OSF/1' /usr/include/ctype.h >/dev/null 2>&1
-then
- echo "Looks kind of like an OSF/1 system, but we'll see..."
- echo exit 0 >osf1
-elif test `echo abc | $tr a-z A-Z` = Abc ; then
- xxx=`./loc addbib blurfl $pth`
- if $test -f $xxx; then
- echo "Looks kind of like a USG system with BSD features, but we'll see..."
- echo exit 0 >bsd
- echo exit 0 >usg
- else
- if $contains SIGTSTP foo >/dev/null 2>&1 ; then
- echo "Looks kind of like an extended USG system, but we'll see..."
- else
- echo "Looks kind of like a USG system, but we'll see..."
- fi
- echo exit 0 >usg
- fi
-elif $contains SIGTSTP foo >/dev/null 2>&1 ; then
- echo "Looks kind of like a BSD system, but we'll see..."
- d_bsd="$define"
- echo exit 0 >bsd
-else
- echo "Looks kind of like a Version 7 system, but we'll see..."
- echo exit 0 >v7
-fi
-case "$eunicefix" in
-*unixtovms*)
- $cat <<'EOI'
-There is, however, a strange, musty smell in the air that reminds me of
-something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
-EOI
- echo exit 0 >eunice
- d_eunice="$define"
-: it so happens the Eunice I know will not run shell scripts in Unix format
+Previous version of $package used the standard IO mechanisms as
+defined in <stdio.h>. Versions 5.003_02 and later of $package allow
+alternate IO mechanisms via the PerlIO abstraction layer, but the
+stdio mechanism is still available if needed. The abstraction layer
+can use AT&T's sfio (if you already have sfio installed) or regular stdio.
+Using PerlIO with sfio may cause problems with some extension modules.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Use the PerlIO abstraction layer?'
+. ./myread
+case "$ans" in
+y|Y)
+ val="$define"
;;
-*)
- echo " "
- echo "Congratulations. You aren't running Eunice."
- d_eunice="$undef"
+*)
+ echo "Ok, doing things the stdio way."
+ val="$undef"
;;
esac
-: Detect OS2. The p_ variable is set above in the Head.U unit.
-: Note that this also -- wrongly -- detects e.g. dos-djgpp, which also uses
-: semicolon as a patch separator
-case "$p_" in
-:) ;;
-*)
- $cat <<'EOI'
-I have the feeling something is not exactly right, however...don't tell me...
-lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
-(Or you may be running DOS with DJGPP.)
-EOI
- echo exit 0 >os2
+set useperlio
+eval $setvar
+
+case "$usesocks" in
+$define|true|[yY]*)
+ case "$useperlio" in
+ $define|true|[yY]*) ;;
+ *) cat >&4 <<EOM
+
+You are using the SOCKS proxy protocol library which means that you
+should also use the PerlIO layer. You may be headed for trouble.
+
+EOM
+ ;;
+ esac
;;
esac
-if test -f /xenix; then
- echo "Actually, this looks more like a XENIX system..."
- echo exit 0 >xenix
- d_xenix="$define"
-else
- echo " "
- echo "It's not Xenix..."
- d_xenix="$undef"
-fi
-chmod +x xenix
-$eunicefix xenix
-if test -f /venix; then
- echo "Actually, this looks more like a VENIX system..."
- echo exit 0 >venix
-else
- echo " "
- if ./xenix; then
- : null
- else
- echo "Nor is it Venix..."
- fi
-fi
-chmod +x bsd usg v7 osf1 eunice xenix venix os2
-$eunicefix bsd usg v7 osf1 eunice xenix venix os2
-$rm -f foo
-case "$cc" in
-'') dflt=cc;;
-*) dflt="$cc";;
+
+case "$usethreads" in
+$define|true|[yY]*) dflt='y';;
+*) # Catch case where user specified ithreads or 5005threads but
+ # forgot -Dusethreads (A.D. 4/2002)
+ case "$useithreads$use5005threads" in
+ *$define*)
+ case "$useperlio" in
+ "$define") dflt='y' ;;
+ *) dflt='n' ;;
+ esac
+ ;;
+ *) dflt='n';;
+ esac
+ ;;
esac
-rp="Use which C compiler?"
-. ./myread
-cc="$ans"
+cat <<EOM
-: See if they have not cc but they do have gcc
-. ./trygcc
-: Look for a hint-file generated 'call-back-unit'. Now that the
-: user has specified the compiler, we may need to set or change some
-: other defaults.
-if $test -f cc.cbu; then
- . ./cc.cbu
-fi
-. ./checkcc
+Perl can be built to take advantage of threads on some systems.
+To do so, Configure can be run with -Dusethreads.
-echo " "
-echo "Checking for GNU cc in disguise and/or its version number..." >&4
-$cat >try.c <<EOM
-#include <stdio.h>
-int main() {
-#ifdef __GNUC__
-#ifdef __VERSION__
- printf("%s\n", __VERSION__);
-#else
- printf("%s\n", "1");
-#endif
-#endif
- return(0);
-}
+Note that Perl built with threading support runs slightly slower
+and uses more memory than plain Perl. The current implementation
+is believed to be stable, but it is fairly new, and so should be
+treated with caution.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
EOM
-if $cc -o try $ccflags $ldflags try.c; then
- gccversion=`$run ./try`
- case "$gccversion" in
- '') echo "You are not using GNU cc." ;;
- *) echo "You are using GNU cc $gccversion."
- ccname=gcc
- ;;
- esac
-else
- echo " "
- echo "*** WHOA THERE!!! ***" >&4
- echo " Your C compiler \"$cc\" doesn't seem to be working!" >&4
- case "$knowitall" in
- '')
- echo " You'd better start hunting for one and let me know about it." >&4
- exit 1
- ;;
- esac
-fi
-$rm -f try try.*
-case "$gccversion" in
-1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
+rp='Build a threading Perl?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
esac
-case "$gccversion" in
-'') gccosandvers='' ;;
-*) gccshortvers=`echo "$gccversion"|sed 's/ .*//'`
- gccosandvers=`$cc -v 2>&1|grep '/specs$'|sed "s!.*/[^-/]*-[^-/]*-\([^-/]*\)/$gccshortvers/specs!\1!"`
- gccshortvers=''
- case "$gccosandvers" in
- $osname) gccosandvers='' ;; # linux gccs seem to have no linux osvers, grr
- $osname$osvers) ;; # looking good
- $osname*) cat <<EOM >&4
-
-*** WHOA THERE!!! ***
-
- Your gcc has not been compiled for the exact release of
- your operating system ($gccosandvers versus $osname$osvers).
+set usethreads
+eval $setvar
- In general it is a good idea to keep gcc synchronized with
- the operating system because otherwise serious problems
- may ensue when trying to compile software, like Perl.
+case "$usethreads" in
+$define)
+ $cat <<EOM
- I'm trying to be optimistic here, though, and will continue.
- If later during the configuration and build icky compilation
- problems appear (headerfile conflicts being the most common
- manifestation), I suggest reinstalling the gcc to match
- your operating system release.
+Since release 5.6, Perl has had two different threading implementations,
+the newer interpreter-based version (ithreads) with one interpreter per
+thread, and the older 5.005 version (5005threads).
+The 5005threads version is effectively unmaintained and will probably be
+removed in Perl 5.10, so there should be no need to build a Perl using it
+unless needed for backwards compatibility with some existing 5.005threads
+code.
EOM
- ;;
- *) gccosandvers='' ;; # failed to parse, better be silent
- esac
- ;;
-esac
-case "$ccname" in
-'') ccname="$cc" ;;
+ : Default to ithreads unless overridden on command line or with
+ : old config.sh
+ dflt='y'
+ case "$use5005threads" in
+ $define|true|[yY]*) dflt='n';;
+ esac
+ case "$useithreads" in
+ $undef|false|[nN]*) dflt='n';;
+ esac
+ rp='Use the newer interpreter-based ithreads?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ set useithreads
+ eval $setvar
+ : Now set use5005threads to the opposite value.
+ case "$useithreads" in
+ $define) val="$undef" ;;
+ *) val="$define" ;;
+ esac
+ set use5005threads
+ eval $setvar
+ ;;
+*)
+ useithreads="$undef"
+ use5005threads="$undef"
+ ;;
esac
-# gcc 3.* complain about adding -Idirectories that they already know about,
-# so we will take those off from locincpth.
-case "$gccversion" in
-3*)
- echo "main(){}">try.c
- for incdir in $locincpth; do
- warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
- grep '^c[cp]p*[01]: warning: changing search order '`
- if test "X$warn" != X; then
- locincpth=`echo " $locincpth " | sed "s! $incdir ! !"`
- fi
- done
- $rm -f try try.*
-esac
+case "$useithreads$use5005threads" in
+"$define$define")
+ $cat >&4 <<EOM
-: decide how portable to be. Allow command line overrides.
-case "$d_portable" in
-"$undef") ;;
-*) d_portable="$define" ;;
-esac
+You cannot have both the ithreads and the 5.005 threads enabled
+at the same time. Disabling the 5.005 threads since they are
+much less stable than the ithreads.
-: set up shell script to do ~ expansion
-cat >filexp <<EOSS
-$startsh
-: expand filename
-case "\$1" in
- ~/*|~)
- echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
- ;;
- ~*)
- if $test -f /bin/csh; then
- /bin/csh -f -c "glob \$1"
- failed=\$?
- echo ""
- exit \$failed
- else
- name=\`$expr x\$1 : '..\([^/]*\)'\`
- dir=\`$sed -n -e "/^\${name}:/{s/^[^:]*:[^:]*:[^:]*:[^:]*:[^:]*:\([^:]*\).*"'\$'"/\1/" -e p -e q -e '}' </etc/passwd\`
- if $test ! -d "\$dir"; then
- me=\`basename \$0\`
- echo "\$me: can't locate home directory for: \$name" >&2
- exit 1
- fi
- case "\$1" in
- */*)
- echo \$dir/\`$expr x\$1 : '..[^/]*/\(.*\)'\`
- ;;
- *)
- echo \$dir
- ;;
- esac
- fi
- ;;
-*)
- echo \$1
+EOM
+ use5005threads="$undef"
;;
esac
-EOSS
-chmod +x filexp
-$eunicefix filexp
-: now set up to get a file name
-cat <<EOS >getfile
-$startsh
-EOS
-cat <<'EOSC' >>getfile
-tilde=''
-fullpath=''
-already=''
-skip=''
-none_ok=''
-exp_file=''
-nopath_ok=''
-orig_rp="$rp"
-orig_dflt="$dflt"
-case "$gfpth" in
-'') gfpth='.' ;;
-esac
+if test X"$usethreads" = "X$define" -a "X$useperlio" = "Xundef"; then
+ cat >&4 <<EOF
+***
+*** To build with ithreads you must also use the PerlIO layer.
+*** Cannot continue, aborting.
+***
+EOF
+ exit 1
+fi
-case "$fn" in
-*\(*)
- : getfile will accept an answer from the comma-separated list
- : enclosed in parentheses even if it does not meet other criteria.
- expr "$fn" : '.*(\(.*\)).*' | $tr ',' $trnl >getfile.ok
- fn=`echo $fn | sed 's/(.*)//'`
- ;;
+case "$d_oldpthreads" in
+'') : Configure tests would be welcome here. For now, assume undef.
+ val="$undef" ;;
+*) val="$d_oldpthreads" ;;
esac
+set d_oldpthreads
+eval $setvar
-case "$fn" in
-*:*)
- loc_file=`expr $fn : '.*:\(.*\)'`
- fn=`expr $fn : '\(.*\):.*'`
+
+: Look for a hint-file generated 'call-back-unit'. If the
+: user has specified that a threading perl is to be built,
+: we may need to set or change some other defaults.
+if $test -f usethreads.cbu; then
+ echo "Your platform has some specific hints regarding threaded builds, using them..."
+ . ./usethreads.cbu
+else
+ case "$usethreads" in
+ "$define"|true|[yY]*)
+ $cat <<EOM
+(Your platform does not have any specific hints for threaded builds.
+ Assuming POSIX threads, then.)
+EOM
;;
-esac
+ esac
+fi
-case "$fn" in
-*~*) tilde=true;;
-esac
-case "$fn" in
-*/*) fullpath=true;;
-esac
-case "$fn" in
-*+*) skip=true;;
-esac
-case "$fn" in
-*n*) none_ok=true;;
-esac
-case "$fn" in
-*e*) exp_file=true;;
-esac
-case "$fn" in
-*p*) nopath_ok=true;;
-esac
+cat <<EOM
-case "$fn" in
-*f*) type='File';;
-*d*) type='Directory';;
-*l*) type='Locate';;
-esac
+Perl can be built so that multiple Perl interpreters can coexist
+within the same Perl executable.
+EOM
-what="$type"
-case "$what" in
-Locate) what='File';;
+case "$useithreads" in
+$define)
+ cat <<EOM
+This multiple interpreter support is required for interpreter-based threads.
+EOM
+ val="$define"
+ ;;
+*) case "$usemultiplicity" in
+ $define|true|[yY]*) dflt='y';;
+ *) dflt='n';;
+ esac
+ echo " "
+ echo "If this doesn't make any sense to you, just accept the default '$dflt'."
+ rp='Build Perl for multiplicity?'
+ . ./myread
+ case "$ans" in
+ y|Y) val="$define" ;;
+ *) val="$undef" ;;
+ esac
+ ;;
esac
+set usemultiplicity
+eval $setvar
-case "$exp_file" in
-'')
- case "$d_portable" in
- "$define") ;;
- *) exp_file=true;;
- esac
+
+case "$usemorebits" in
+"$define"|true|[yY]*)
+ use64bitint="$define"
+ uselongdouble="$define"
+ usemorebits="$define"
+ ;;
+*) usemorebits="$undef"
;;
esac
-cd ..
-while test "$type"; do
- redo=''
- rp="$orig_rp"
- dflt="$orig_dflt"
- case "$tilde" in
- true) rp="$rp (~name ok)";;
- esac
- . UU/myread
- if test -f UU/getfile.ok && \
- $contains "^$ans\$" UU/getfile.ok >/dev/null 2>&1
- then
- value="$ans"
- ansexp="$ans"
- break
+: make some quick guesses about what we are up against
+echo " "
+$echo $n "Hmm... $c"
+echo exit 1 >bsd
+echo exit 1 >usg
+echo exit 1 >v7
+echo exit 1 >osf1
+echo exit 1 >eunice
+echo exit 1 >xenix
+echo exit 1 >venix
+echo exit 1 >os2
+d_bsd="$undef"
+$cat /usr/include/signal.h /usr/include/sys/signal.h >foo 2>/dev/null
+if test -f /osf_boot || $contains 'OSF/1' /usr/include/ctype.h >/dev/null 2>&1
+then
+ echo "Looks kind of like an OSF/1 system, but we'll see..."
+ echo exit 0 >osf1
+elif test `echo abc | $tr a-z A-Z` = Abc ; then
+ xxx=`./loc addbib blurfl $pth`
+ if $test -f $xxx; then
+ echo "Looks kind of like a USG system with BSD features, but we'll see..."
+ echo exit 0 >bsd
+ echo exit 0 >usg
+ else
+ if $contains SIGTSTP foo >/dev/null 2>&1 ; then
+ echo "Looks kind of like an extended USG system, but we'll see..."
+ else
+ echo "Looks kind of like a USG system, but we'll see..."
+ fi
+ echo exit 0 >usg
fi
- case "$ans" in
- none)
- value=''
- ansexp=''
- case "$none_ok" in
- true) type='';;
- esac
- ;;
- *)
- case "$tilde" in
- '') value="$ans"
- ansexp="$ans";;
- *)
- value=`UU/filexp $ans`
- case $? in
- 0)
- if test "$ans" != "$value"; then
- echo "(That expands to $value on this system.)"
- fi
- ;;
- *) value="$ans";;
- esac
- ansexp="$value"
- case "$exp_file" in
- '') value="$ans";;
- esac
- ;;
- esac
- case "$fullpath" in
- true)
- case "$ansexp" in
- /*) value="$ansexp" ;;
- [a-zA-Z]:/*) value="$ansexp" ;;
- *)
- redo=true
- case "$already" in
- true)
- echo "I shall only accept a full path name, as in /bin/ls." >&4
- echo "Use a ! shell escape if you wish to check pathnames." >&4
- ;;
- *)
- echo "Please give a full path name, starting with slash." >&4
- case "$tilde" in
- true)
- echo "Note that using ~name is ok provided it expands well." >&4
- already=true
- ;;
- esac
- esac
- ;;
- esac
- ;;
- esac
- case "$redo" in
- '')
- case "$type" in
- File)
- for fp in $gfpth; do
- if test "X$fp" = X.; then
- pf="$ansexp"
- else
- pf="$fp/$ansexp"
- fi
- if test -f "$pf"; then
- type=''
- elif test -r "$pf" || (test -h "$pf") >/dev/null 2>&1
- then
- echo "($value is not a plain file, but that's ok.)"
- type=''
- fi
- if test X"$type" = X; then
- value="$pf"
- break
- fi
- done
- ;;
- Directory)
- for fp in $gfpth; do
- if test "X$fp" = X.; then
- dir="$ans"
- direxp="$ansexp"
- else
- dir="$fp/$ansexp"
- direxp="$fp/$ansexp"
- fi
- if test -d "$direxp"; then
- type=''
- value="$dir"
- break
- fi
- done
- ;;
- Locate)
- if test -d "$ansexp"; then
- echo "(Looking for $loc_file in directory $value.)"
- value="$value/$loc_file"
- ansexp="$ansexp/$loc_file"
- fi
- if test -f "$ansexp"; then
- type=''
- fi
- case "$nopath_ok" in
- true) case "$value" in
- */*) ;;
- *) echo "Assuming $value will be in people's path."
- type=''
- ;;
- esac
- ;;
- esac
- ;;
- esac
+elif $contains SIGTSTP foo >/dev/null 2>&1 ; then
+ echo "Looks kind of like a BSD system, but we'll see..."
+ d_bsd="$define"
+ echo exit 0 >bsd
+else
+ echo "Looks kind of like a Version 7 system, but we'll see..."
+ echo exit 0 >v7
+fi
+case "$eunicefix" in
+*unixtovms*)
+ $cat <<'EOI'
+There is, however, a strange, musty smell in the air that reminds me of
+something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
+EOI
+ echo exit 0 >eunice
+ d_eunice="$define"
+: it so happens the Eunice I know will not run shell scripts in Unix format
+ ;;
+*)
+ echo " "
+ echo "Congratulations. You aren't running Eunice."
+ d_eunice="$undef"
+ ;;
+esac
+: Detect OS2. The p_ variable is set above in the Head.U unit.
+: Note that this also -- wrongly -- detects e.g. dos-djgpp, which also uses
+: semicolon as a patch separator
+case "$p_" in
+:) ;;
+*)
+ $cat <<'EOI'
+I have the feeling something is not exactly right, however...don't tell me...
+lemme think...does HAL ring a bell?...no, of course, you're only running OS/2!
+(Or you may be running DOS with DJGPP.)
+EOI
+ echo exit 0 >os2
+ ;;
+esac
+if test -f /xenix; then
+ echo "Actually, this looks more like a XENIX system..."
+ echo exit 0 >xenix
+ d_xenix="$define"
+else
+ echo " "
+ echo "It's not Xenix..."
+ d_xenix="$undef"
+fi
+chmod +x xenix
+$eunicefix xenix
+if test -f /venix; then
+ echo "Actually, this looks more like a VENIX system..."
+ echo exit 0 >venix
+else
+ echo " "
+ if ./xenix; then
+ : null
+ else
+ echo "Nor is it Venix..."
+ fi
+fi
+chmod +x bsd usg v7 osf1 eunice xenix venix os2
+$eunicefix bsd usg v7 osf1 eunice xenix venix os2
+$rm -f foo
- case "$skip" in
- true) type='';
- esac
+case "$cc" in
+'') dflt=cc;;
+*) dflt="$cc";;
+esac
+rp="Use which C compiler?"
+. ./myread
+cc="$ans"
- case "$type" in
- '') ;;
- *)
- if test "$fastread" = yes; then
- dflt=y
- else
- dflt=n
- fi
- rp="$what $value doesn't exist. Use that name anyway?"
- . UU/myread
- dflt=''
- case "$ans" in
- y*) type='';;
- *) echo " ";;
- esac
- ;;
- esac
- ;;
- esac
+: See if they have not cc but they do have gcc
+. ./trygcc
+: Look for a hint-file generated 'call-back-unit'. Now that the
+: user has specified the compiler, we may need to set or change some
+: other defaults.
+if $test -f cc.cbu; then
+ . ./cc.cbu
+fi
+. ./checkcc
+
+echo " "
+echo "Checking for GNU cc in disguise and/or its version number..." >&4
+$cat >try.c <<EOM
+#include <stdio.h>
+int main() {
+#if defined(__GNUC__) && !defined(__INTEL_COMPILER)
+#ifdef __VERSION__
+ printf("%s\n", __VERSION__);
+#else
+ printf("%s\n", "1");
+#endif
+#endif
+ return(0);
+}
+EOM
+if $cc -o try $ccflags $ldflags try.c; then
+ gccversion=`$run ./try`
+ case "$gccversion" in
+ '') echo "You are not using GNU cc." ;;
+ *) echo "You are using GNU cc $gccversion."
+ ccname=gcc
+ ;;
+ esac
+else
+ echo " "
+ echo "*** WHOA THERE!!! ***" >&4
+ echo " Your C compiler \"$cc\" doesn't seem to be working!" >&4
+ case "$knowitall" in
+ '')
+ echo " You'd better start hunting for one and let me know about it." >&4
+ exit 1
;;
esac
-done
-cd UU
-ans="$value"
-rp="$orig_rp"
-dflt="$orig_dflt"
-rm -f getfile.ok
-test "X$gfpthkeep" != Xy && gfpth=""
-EOSC
+fi
+$rm -f try try.*
+case "$gccversion" in
+1*) cpp=`./loc gcc-cpp $cpp $pth` ;;
+esac
+case "$gccversion" in
+'') gccosandvers='' ;;
+*) gccshortvers=`echo "$gccversion"|sed 's/ .*//'`
+ gccosandvers=`$cc -v 2>&1|grep '/specs$'|sed "s!.*/[^-/]*-[^-/]*-\([^-/]*\)/$gccshortvers/specs!\1!"`
+ gccshortvers=''
+ case "$gccosandvers" in
+ $osname) gccosandvers='' ;; # linux gccs seem to have no linux osvers, grr
+ $osname$osvers) ;; # looking good
+ $osname*) cat <<EOM >&4
+
+*** WHOA THERE!!! ***
+
+ Your gcc has not been compiled for the exact release of
+ your operating system ($gccosandvers versus $osname$osvers).
+
+ In general it is a good idea to keep gcc synchronized with
+ the operating system because otherwise serious problems
+ may ensue when trying to compile software, like Perl.
+
+ I'm trying to be optimistic here, though, and will continue.
+ If later during the configuration and build icky compilation
+ problems appear (headerfile conflicts being the most common
+ manifestation), I suggest reinstalling the gcc to match
+ your operating system release.
+
+EOM
+ ;;
+ *) gccosandvers='' ;; # failed to parse, better be silent
+ esac
+ ;;
+esac
+case "$ccname" in
+'') ccname="$cc" ;;
+esac
+
+# gcc 3.* complain about adding -Idirectories that they already know about,
+# so we will take those off from locincpth.
+case "$gccversion" in
+3*)
+ echo "main(){}">try.c
+ for incdir in $locincpth; do
+ warn=`$cc $ccflags -I$incdir -c try.c 2>&1 | \
+ grep '^c[cp]p*[01]: warning: changing search order '`
+ if test "X$warn" != X; then
+ locincpth=`echo " $locincpth " | sed "s! $incdir ! !"`
+ fi
+ done
+ $rm -f try try.*
+esac
: What should the include directory be ?
echo " "
'none') optimize=" ";;
esac
+: Check what DEBUGGING is required from the command line
+: -DEBUGGING or -DDEBUGGING or
+: -DEBUGGING=both = -g + -DDEBUGGING
+: -DEBUGGING=-g or -Doptimize=-g = -g
+: -DEBUGGING=none or -UDEBUGGING =
+: -DEBUGGING=old or -DEBUGGING=default = ? $optimize
+case "$EBUGGING" in
+'') ;;
+*) DEBUGGING=$EBUGGING ;;
+esac
+
+case "$DEBUGGING" in
+-g|$define)
+ case "$optimize" in
+ *-g*) ;;
+ *) optimize="$optimize -g" ;;
+ esac ;;
+none|$undef)
+ case "$optimize" in
+ *-g*) set `echo "X $optimize " | sed 's/ -g / /'`
+ shift
+ optimize="$*"
+ ;;
+ esac ;;
+esac
+
dflt=''
+case "$DEBUGGING" in
+both|$define) dflt='-DDEBUGGING'
+esac
+
: We will not override a previous value, but we might want to
: augment a hint file
case "$hint" in
default|recommended)
case "$gccversion" in
- 1*) dflt='-fpcc-struct-return' ;;
+ 1*) dflt="$dflt -fpcc-struct-return" ;;
esac
- case "$optimize" in
- *-g*) dflt="$dflt -DDEBUGGING";;
+ case "$optimize:$DEBUGGING" in
+ *-g*:old) dflt="$dflt -DDEBUGGING";;
esac
case "$gccversion" in
2*) if test -d /etc/conf/kconfig.d &&
?*) echo " "
echo "Checking if your compiler accepts -pipe" 2>&1
echo 'int main(void) { return 0; }' > gcctest.c
- if $cc -O2 -pipe -o gcctest gcctest.c; then
+ if $cc -pipe -o gcctest gcctest.c; then
echo "Yes, it does." 2>&1
case "$ccflags" in
*-pipe*)
else
echo "Nope, it doesn't, but that's ok." 2>&1
fi
+
+ echo "Checking if your compiler accepts -Wdeclaration-after-statement" 2>&1
+ echo 'int main(void) { return 0; }' > gcctest.c
+ if $cc -Wdeclaration-after-statement -o gcctest gcctest.c; then
+ echo "Yes, it does." 2>&1
+ case "$ccflags" in
+ *-Wdeclaration-after-statement*)
+ echo "Leaving current flags $ccflags alone." 2>&1
+ ;;
+ *) dflt="$dflt -Wdeclaration-after-statement" ;;
+ esac
+ else
+ echo "Nope, it doesn't, but that's ok." 2>&1
+ fi
;;
esac
;;
esac
case "$useperlio" in
$define)
- echo "Perlio selected." >&4
- ;;
-*)
- echo "Perlio not selected, using stdio." >&4
- case "$archname" in
- *-stdio*) echo "...and architecture name already has -stdio." >&4
- ;;
- *) archname="$archname-stdio"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-esac
-if $test -f archname.cbu; then
- echo "Your platform has some specific hints for architecture name, using them..."
- . ./archname.cbu
-fi
-
-: determine root of directory hierarchy where package will be installed.
-case "$prefix" in
-'')
- dflt=`./loc . /usr/local /usr/local /local /opt /usr`
- ;;
-*?/)
- dflt=`echo "$prefix" | sed 's/.$//'`
- ;;
-*)
- dflt="$prefix"
- ;;
-esac
-$cat <<EOM
-
-By default, $package will be installed in $dflt/bin, manual pages
-under $dflt/man, etc..., i.e. with $dflt as prefix for all
-installation directories. Typically this is something like /usr/local.
-If you wish to have binaries under /usr/bin but other parts of the
-installation under /usr/local, that's ok: you will be prompted
-separately for each of the installation directories, the prefix being
-only used to set the defaults.
-
-EOM
-fn=d~
-rp='Installation prefix to use?'
-. ./getfile
-oldprefix=''
-case "$prefix" in
-'') ;;
-*)
- case "$ans" in
- "$prefix") ;;
- *) oldprefix="$prefix";;
- esac
- ;;
-esac
-prefix="$ans"
-prefixexp="$ansexp"
-
-case "$afsroot" in
-'') afsroot=/afs ;;
-*) afsroot=$afsroot ;;
-esac
-
-: is AFS running?
-echo " "
-case "$afs" in
-$define|true) afs=true ;;
-$undef|false) afs=false ;;
-*) if test -d $afsroot; then
- afs=true
- else
- afs=false
- fi
+ echo "Perlio selected." >&4
+ ;;
+*)
+ echo "Perlio not selected, using stdio." >&4
+ case "$archname" in
+ *-stdio*) echo "...and architecture name already has -stdio." >&4
+ ;;
+ *) archname="$archname-stdio"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
;;
esac
-if $afs; then
- echo "AFS may be running... I'll be extra cautious then..." >&4
-else
- echo "AFS does not seem to be running..." >&4
-fi
-
-: determine installation prefix for where package is to be installed.
-if $afs; then
-$cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-files will reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installprefix" in
- '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installprefix";;
- esac
-else
-$cat <<EOM
-
-In some special cases, particularly when building $package for distribution,
-it is convenient to distinguish the directory in which files should be
-installed from the directory ($prefix) in which they will
-eventually reside. For most users, these two directories are the same.
-
-EOM
- case "$installprefix" in
- '') dflt=$prefix ;;
- *) dflt=$installprefix;;
- esac
+if $test -f archname.cbu; then
+ echo "Your platform has some specific hints for architecture name, using them..."
+ . ./archname.cbu
fi
-fn=d~
-rp='What installation prefix should I use for installing files?'
-. ./getfile
-installprefix="$ans"
-installprefixexp="$ansexp"
: set the prefixit variable, to compute a suitable default value
prefixit='case "$3" in
api_revision=`awk '/define[ ]+PERL_API_REVISION/ {print $3}' $rsrc/patchlevel.h`
api_version=`awk '/define[ ]+PERL_API_VERSION/ {print $3}' $rsrc/patchlevel.h`
api_subversion=`awk '/define[ ]+PERL_API_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
- perl_patchlevel=`grep ',"DEVEL[0-9][0-9]*"' $rsrc/patchlevel.h|sed 's/[^0-9]//g'`
+ perl_patchlevel=`egrep 'define PERL_PATCHNUM [0-9][0-9]|,"MAINT[0-9][0-9]*"' $rsrc/patchlevel.h|sed 's/[^0-9]//g'`
else
revision=0
patchlevel=0
perl_patchlevel=0
$echo "(You do not have patchlevel.h. Eek.)"
fi
-if $test -r $rsrc/.patch ; then
- if $test "`cat $rsrc/.patch`" -gt "$perl_patchlevel" ; then
+if $test -r $rsrc/.patch ; then
+ if $test "X$perl_patchlevel" = "X" || $test "`cat $rsrc/.patch`" -gt "$perl_patchlevel" ; then
perl_patchlevel=`cat $rsrc/.patch`
fi
fi
: confusing anyway.
installstyle=$dflt
+: determine where public executables go
+echo " "
+set dflt bin bin
+eval $prefixit
+fn=d~
+rp='Pathname where the public executables will reside?'
+. ./getfile
+if $test "X$ansexp" != "X$binexp"; then
+ installbin=''
+fi
+prefixvar=bin
+: XXX Bug? -- ignores Configure -Dinstallprefix setting.
+: XXX If this is fixed, also fix the "start perl" hunk below, which relies on
+: this via initialinstalllocation
+. ./setprefixvar
+
+case "$userelocatableinc" in
+$define|true|[yY]*) dflt='y' ;;
+*) dflt='n' ;;
+esac
+cat <<EOM
+
+Would you like to build Perl so that the installation is relocatable, so that
+library paths in @INC are determined relative to the path of the perl binary?
+This is not advised for system Perl installs, or if you need to run setid
+scripts or scripts under taint mode.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+rp='Use relocatable @INC?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set userelocatableinc
+eval $setvar
+
+initialinstalllocation="$binexp"
+: Default prefix is now "up one level from where the binaries are"
+case "$userelocatableinc" in
+$define|true|[yY]*)
+ bin=".../"
+ binexp=".../"
+ prefix=".../.."
+ prefixexp=".../.."
+ installprefixexp=".../.."
+ ;;
+esac
+
: determine where private library files go
: Usual default is /usr/local/lib/perl5/$version.
-: Also allow things like /opt/perl/lib/$version, since
+: Also allow things like /opt/perl/lib/$version, since
: /opt/perl/lib/perl5... would be redundant.
: The default "style" setting is made in installstyle.U
case "$installstyle" in
private library directory that is accessible by everyone.
EOM
+fn=$binexp
fn=d~+
rp='Pathname where the private library files will reside?'
. ./getfile
-privlib="$ans"
-privlibexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installprivlib=`echo $privlibexp | sed "s#^$prefix#$installprefix#"`
-else
- installprivlib="$privlibexp"
-fi
+prefixvar=privlib
+. ./setprefixvar
: set the prefixup variable, to restore leading tilda escape
prefixup='case "$prefixexp" in
them with the rest of the public library files.
EOM
+fn=$binexp
fn=d+~
rp='Where do you want to put the public architecture-dependent libraries?'
. ./getfile
-archlib="$ans"
-archlibexp="$ansexp"
+prefixvar=archlib
+. ./setprefixvar
if $test X"$archlib" = X"$privlib"; then
d_archlib="$undef"
else
d_archlib="$define"
fi
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installarchlib=`echo $archlibexp | sed "s#^$prefix#$installprefix#"`
-else
- installarchlib="$archlibexp"
-fi
: see if setuid scripts can be secure
$cat <<EOM
setuid scripts have been disabled in your kernel.
EOM
- case "$d_dosuid" in
- "$define") dflt=y ;;
- *) dflt=n ;;
- esac
- rp="Do you want to do setuid/setgid emulation?"
- . ./myread
- case "$ans" in
- [yY]*) val="$define";;
- *) val="$undef";;
- esac
+ case "$d_dosuid" in
+ "$define") dflt=y ;;
+ *) dflt=n ;;
+ esac
+ rp="Do you want to do setuid/setgid emulation?"
+ . ./myread
+ case "$ans" in
+ [yY]*) val="$define";;
+ *) val="$undef";;
+ esac
+ ;;
+esac
+set d_dosuid
+eval $setvar
+
+: Find perl5.005 or later.
+echo "Looking for a previously installed perl5.005 or later... "
+case "$perl5" in
+'') for tdir in `echo "$binexp$path_sep$PATH" | $sed "s/$path_sep/ /g"`; do
+ : Check if this perl is recent and can load a simple module
+ if $test -x $tdir/perl$exe_ext && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl
+ break;
+ elif $test -x $tdir/perl5$exe_ext && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
+ perl5=$tdir/perl5
+ break;
+ fi
+ done
+ ;;
+*) perl5="$perl5"
+ ;;
+esac
+case "$perl5" in
+'') echo "None found. That's ok.";;
+*) echo "Using $perl5." ;;
+esac
+
+$cat <<EOM
+
+After $package is installed, you may wish to install various
+add-on modules and utilities. Typically, these add-ons will
+be installed under $prefix with the rest
+of this package. However, you may wish to install such add-ons
+elsewhere under a different prefix.
+
+If you do not wish to put everything under a single prefix, that's
+ok. You will be prompted for the individual locations; this siteprefix
+is only used to suggest the defaults.
+
+The default should be fine for most people.
+
+EOM
+fn=d~+
+rp='Installation prefix to use for add-on modules and utilities?'
+: XXX Here might be another good place for an installstyle setting.
+case "$siteprefix" in
+'') dflt=$prefix ;;
+*) dflt=$siteprefix ;;
+esac
+. ./getfile
+: XXX Prefixit unit does not yet support siteprefix and vendorprefix
+oldsiteprefix=''
+case "$siteprefix" in
+'') ;;
+*) case "$ans" in
+ "$prefix") ;;
+ *) oldsiteprefix="$prefix";;
+ esac
+ ;;
+esac
+siteprefix="$ans"
+siteprefixexp="$ansexp"
+
+: determine where site specific libraries go.
+: Usual default is /usr/local/lib/perl5/site_perl/$version
+: The default "style" setting is made in installstyle.U
+: XXX No longer works with Prefixit stuff.
+prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+case "$sitelib" in
+'') case "$installstyle" in
+ *lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
+ *) dflt=$siteprefix/lib/site_$prog/$version ;;
+ esac
+ ;;
+*) dflt="$sitelib"
+ ;;
+esac
+$cat <<EOM
+
+The installation process will create a directory for
+site-specific extensions and modules. Most users find it convenient
+to place all site-specific files in this directory rather than in the
+main distribution directory.
+
+EOM
+fn=d~+
+rp='Pathname for the site-specific library files?'
+. ./getfile
+prefixvar=sitelib
+. ./setprefixvar
+sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
+
+: Determine list of previous versions to include in @INC
+$cat > getverlist <<EOPL
+#!$perl5 -w
+use File::Basename;
+\$api_versionstring = "$api_versionstring";
+\$version = "$version";
+\$stem = "$sitelib_stem";
+\$archname = "$archname";
+EOPL
+ $cat >> getverlist <<'EOPL'
+# Can't have leading @ because metaconfig interprets it as a command!
+;@inc_version_list=();
+# XXX Redo to do opendir/readdir?
+if (-d $stem) {
+ chdir($stem);
+ ;@candidates = glob("5.*");
+}
+else {
+ ;@candidates = ();
+}
+
+# XXX ToDo: These comparisons must be reworked when two-digit
+# subversions come along, so that 5.7.10 compares as greater than
+# 5.7.3! By that time, hope that 5.6.x is sufficiently
+# widespread that we can use the built-in version vectors rather
+# than reinventing them here. For 5.6.0, however, we must
+# assume this script will likely be run by 5.005_0x. --AD 1/2000.
+foreach $d (@candidates) {
+ if ($d lt $version) {
+ if ($d ge $api_versionstring) {
+ unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
+ }
+ elsif ($d ge "5.005") {
+ unshift(@inc_version_list, grep { -d } $d);
+ }
+ }
+ else {
+ # Skip newer version. I.e. don't look in
+ # 5.7.0 if we're installing 5.6.1.
+ }
+}
+
+if (@inc_version_list) {
+ print join(' ', @inc_version_list);
+}
+else {
+ # Blank space to preserve value for next Configure run.
+ print " ";
+}
+EOPL
+chmod +x getverlist
+case "$inc_version_list" in
+'') if test -x "$perl5$exe_ext"; then
+ dflt=`$perl5 getverlist`
+ else
+ dflt='none'
+ fi
+ ;;
+$undef) dflt='none' ;;
+*) eval dflt=\"$inc_version_list\" ;;
+esac
+case "$dflt" in
+''|' ') dflt=none ;;
+esac
+case "$dflt" in
+5.005) dflt=none ;;
+esac
+$cat <<EOM
+
+In order to ease the process of upgrading, this version of perl
+can be configured to use modules built and installed with earlier
+versions of perl that were installed under $prefix. Specify here
+the list of earlier versions that this version of perl should check.
+If Configure detected no earlier versions of perl installed under
+$prefix, then the list will be empty. Answer 'none' to tell perl
+to not search earlier versions.
+
+The default should almost always be sensible, so if you're not sure,
+just accept the default.
+EOM
+
+rp='List of earlier versions to include in @INC?'
+. ./myread
+case "$ans" in
+[Nn]one|''|' '|$undef) inc_version_list=' ' ;;
+*) inc_version_list="$ans" ;;
+esac
+case "$inc_version_list" in
+''|' ')
+ inc_version_list_init='0'
+ d_inc_version_list="$undef"
+ ;;
+*) inc_version_list_init=`echo $inc_version_list |
+ $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
+ d_inc_version_list="$define"
;;
esac
-set d_dosuid
-eval $setvar
+$rm -f getverlist
: see if this is a malloc.h system
: we want a real compile instead of Inhdr because some systems have a
esac
echo "Your system uses $freetype free(), it would seem." >&4
$rm -f malloc.[co]
-$cat <<EOM
-
-After $package is installed, you may wish to install various
-add-on modules and utilities. Typically, these add-ons will
-be installed under $prefix with the rest
-of this package. However, you may wish to install such add-ons
-elsewhere under a different prefix.
-
-If you do not wish to put everything under a single prefix, that's
-ok. You will be prompted for the individual locations; this siteprefix
-is only used to suggest the defaults.
-
-The default should be fine for most people.
-
-EOM
-fn=d~+
-rp='Installation prefix to use for add-on modules and utilities?'
-: XXX Here might be another good place for an installstyle setting.
-case "$siteprefix" in
-'') dflt=$prefix ;;
-*) dflt=$siteprefix ;;
-esac
-. ./getfile
-: XXX Prefixit unit does not yet support siteprefix and vendorprefix
-oldsiteprefix=''
-case "$siteprefix" in
-'') ;;
-*) case "$ans" in
- "$prefix") ;;
- *) oldsiteprefix="$prefix";;
- esac
- ;;
-esac
-siteprefix="$ans"
-siteprefixexp="$ansexp"
-
-: determine where site specific libraries go.
-: Usual default is /usr/local/lib/perl5/site_perl/$version
-: The default "style" setting is made in installstyle.U
-: XXX No longer works with Prefixit stuff.
-prog=`echo $package | $sed 's/-*[0-9.]*$//'`
-case "$sitelib" in
-'') case "$installstyle" in
- *lib/perl5*) dflt=$siteprefix/lib/$package/site_$prog/$version ;;
- *) dflt=$siteprefix/lib/site_$prog/$version ;;
- esac
- ;;
-*) dflt="$sitelib"
- ;;
-esac
-$cat <<EOM
-
-The installation process will create a directory for
-site-specific extensions and modules. Most users find it convenient
-to place all site-specific files in this directory rather than in the
-main distribution directory.
-
-EOM
-fn=d~+
-rp='Pathname for the site-specific library files?'
-. ./getfile
-sitelib="$ans"
-sitelibexp="$ansexp"
-sitelib_stem=`echo "$sitelibexp" | sed "s,/$version$,,"`
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitelib=`echo $sitelibexp | $sed "s#^$prefix#$installprefix#"`
-else
- installsitelib="$sitelibexp"
-fi
-
: determine where site specific architecture-dependent libraries go.
: sitelib default is /usr/local/lib/perl5/site_perl/$version
: sitearch default is /usr/local/lib/perl5/site_perl/$version/$archname
fn=d~+
rp='Pathname for the site-specific architecture-dependent library files?'
. ./getfile
-sitearch="$ans"
-sitearchexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitearch=`echo $sitearchexp | sed "s#^$prefix#$installprefix#"`
+prefixvar=sitearch
+. ./setprefixvar
+if $test X"$sitearch" = X"$sitelib"; then
+ d_sitearch="$undef"
else
- installsitearch="$sitearchexp"
+ d_sitearch="$define"
fi
$cat <<EOM
;;
esac
vendorlib_stem=`echo "$vendorlibexp" | sed "s,/$version$,,"`
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorlib=`echo $vendorlibexp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorlib="$vendorlibexp"
-fi
+prefixvar=vendorlib
+. ./installprefix
case "$vendorprefix" in
'') d_vendorarch="$undef"
vendorarchexp="$ansexp"
;;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorarch=`echo $vendorarchexp | sed "s#^$prefix#$installprefix#"`
-else
- installvendorarch="$vendorarchexp"
-fi
+prefixvar=vendorarch
+. ./installprefix
: Final catch-all directories to search
$cat <<EOM
;;
esac
-: determine where public executables go
-echo " "
-set dflt bin bin
-eval $prefixit
-fn=d~
-rp='Pathname where the public executables will reside?'
-. ./getfile
-if $test "X$ansexp" != "X$binexp"; then
- installbin=''
-fi
-bin="$ans"
-binexp="$ansexp"
-: Change installation prefix, if necessary.
-: XXX Bug? -- ignores Configure -Dinstallprefix setting.
-if $test X"$prefix" != X"$installprefix"; then
- installbin=`echo $binexp | sed "s#^$prefix#$installprefix#"`
-else
- installbin="$binexp"
-fi
-
echo " "
case "$extras" in
'') dflt='n';;
val="'$extras'"
;;
esac
-set extras
-eval $setvar
-echo " "
-
-: determine where html pages for programs go
-set html1dir html1dir none
-eval $prefixit
-$cat <<EOM
-
-If you wish to install html files for programs in $spackage, indicate
-the appropriate directory here. To skip installing html files,
-answer "none".
-EOM
-case "$html1dir" in
-''|none|$undef|' ') dflt=none ;;
-*) dflt=$html1dir ;;
-esac
-fn=dn+~
-rp="Directory for the main $spackage html pages?"
-. ./getfile
-html1dir="$ans"
-html1direxp="$ansexp"
-: Use ' ' for none so value is preserved next time through Configure
-$test X"$html1dir" = "X" && html1dir=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installhtml1dir=`echo $html1direxp | sed "s#^$prefix#$installprefix#"`
-else
- installhtml1dir="$html1direxp"
-fi
-
-: determine where html pages for libraries and modules go
-set html3dir html3dir none
-eval $prefixit
-$cat <<EOM
-
-If you wish to install html files for modules associated with $spackage,
-indicate the appropriate directory here. To skip installing html files,
-answer "none".
-EOM
-: There is no obvious default. If they have specified html1dir, then
-: try to key off that, possibly changing .../html1 into .../html3.
-case "$html3dir" in
-'') html3dir=`echo "$html1dir" | $sed 's/1$/3$/'` ;;
-*) dflt=$html3dir ;;
-esac
-fn=dn+~
-rp="Directory for the $spackage module html pages?"
-. ./getfile
-html3dir="$ans"
-html3direxp="$ansexp"
-: Use ' ' for none so value is preserved next time through Configure
-$test X"$html3dir" = "X" && html3dir=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installhtml3dir=`echo $html3direxp | sed "s#^$prefix#$installprefix#"`
-else
- installhtml3dir="$html3direxp"
-fi
-
-: Find perl5.005 or later.
-echo "Looking for a previously installed perl5.005 or later... "
-case "$perl5" in
-'') for tdir in `echo "$binexp$path_sep$PATH" | $sed "s/$path_sep/ /g"`; do
- : Check if this perl is recent and can load a simple module
- if $test -x $tdir/perl$exe_ext && $tdir/perl -Mless -e 'use 5.005;' >/dev/null 2>&1; then
- perl5=$tdir/perl
- break;
- elif $test -x $tdir/perl5$exe_ext && $tdir/perl5 -Mless -e 'use 5.005;' >/dev/null 2>&1; then
- perl5=$tdir/perl5
- break;
- fi
- done
- ;;
-*) perl5="$perl5"
- ;;
-esac
-case "$perl5" in
-'') echo "None found. That's ok.";;
-*) echo "Using $perl5." ;;
-esac
-
-: Determine list of previous versions to include in @INC
-$cat > getverlist <<EOPL
-#!$perl5 -w
-use File::Basename;
-\$api_versionstring = "$api_versionstring";
-\$version = "$version";
-\$stem = "$sitelib_stem";
-\$archname = "$archname";
-EOPL
- $cat >> getverlist <<'EOPL'
-# Can't have leading @ because metaconfig interprets it as a command!
-;@inc_version_list=();
-# XXX Redo to do opendir/readdir?
-if (-d $stem) {
- chdir($stem);
- ;@candidates = glob("5.*");
-}
-else {
- ;@candidates = ();
-}
-
-# XXX ToDo: These comparisons must be reworked when two-digit
-# subversions come along, so that 5.7.10 compares as greater than
-# 5.7.3! By that time, hope that 5.6.x is sufficiently
-# widespread that we can use the built-in version vectors rather
-# than reinventing them here. For 5.6.0, however, we must
-# assume this script will likely be run by 5.005_0x. --AD 1/2000.
-foreach $d (@candidates) {
- if ($d lt $version) {
- if ($d ge $api_versionstring) {
- unshift(@inc_version_list, grep { -d } "$d/$archname", $d);
- }
- elsif ($d ge "5.005") {
- unshift(@inc_version_list, grep { -d } $d);
- }
- }
- else {
- # Skip newer version. I.e. don't look in
- # 5.7.0 if we're installing 5.6.1.
- }
-}
-
-if (@inc_version_list) {
- print join(' ', @inc_version_list);
-}
-else {
- # Blank space to preserve value for next Configure run.
- print " ";
-}
-EOPL
-chmod +x getverlist
-case "$inc_version_list" in
-'') if test -x "$perl5$exe_ext"; then
- dflt=`$perl5 getverlist`
- else
- dflt='none'
- fi
- ;;
-$undef) dflt='none' ;;
-*) eval dflt=\"$inc_version_list\" ;;
-esac
-case "$dflt" in
-''|' ') dflt=none ;;
-esac
-case "$dflt" in
-5.005) dflt=none ;;
-esac
-$cat <<EOM
+set extras
+eval $setvar
+echo " "
-In order to ease the process of upgrading, this version of perl
-can be configured to use modules built and installed with earlier
-versions of perl that were installed under $prefix. Specify here
-the list of earlier versions that this version of perl should check.
-If Configure detected no earlier versions of perl installed under
-$prefix, then the list will be empty. Answer 'none' to tell perl
-to not search earlier versions.
+: determine where html pages for programs go
+set html1dir html1dir none
+eval $prefixit
+$cat <<EOM
-The default should almost always be sensible, so if you're not sure,
-just accept the default.
+If you wish to install html files for programs in $spackage, indicate
+the appropriate directory here. To skip installing html files,
+answer "none".
EOM
-
-rp='List of earlier versions to include in @INC?'
-. ./myread
-case "$ans" in
-[Nn]one|''|' '|$undef) inc_version_list=' ' ;;
-*) inc_version_list="$ans" ;;
+case "$html1dir" in
+''|none|$undef|' ') dflt=none ;;
+*) dflt=$html1dir ;;
esac
-case "$inc_version_list" in
-''|' ')
- inc_version_list_init='0';;
-*) inc_version_list_init=`echo $inc_version_list |
- $sed -e 's/^/"/' -e 's/ /","/g' -e 's/$/",0/'`
- ;;
+fn=dn+~
+rp="Directory for the main $spackage html pages?"
+. ./getfile
+prefixvar=html1dir
+. ./setprefixvar
+: Use ' ' for none so value is preserved next time through Configure
+$test X"$html1dir" = "X" && html1dir=' '
+
+: determine where html pages for libraries and modules go
+set html3dir html3dir none
+eval $prefixit
+$cat <<EOM
+
+If you wish to install html files for modules associated with $spackage,
+indicate the appropriate directory here. To skip installing html files,
+answer "none".
+EOM
+: There is no obvious default. If they have specified html1dir, then
+: try to key off that, possibly changing .../html1 into .../html3.
+case "$html3dir" in
+'') html3dir=`echo "$html1dir" | $sed 's/1$/3$/'` ;;
+*) dflt=$html3dir ;;
esac
-$rm -f getverlist
+fn=dn+~
+rp="Directory for the $spackage module html pages?"
+. ./getfile
+prefixvar=html3dir
+. ./setprefixvar
+: Use ' ' for none so value is preserved next time through Configure
+$test X"$html3dir" = "X" && html3dir=' '
: determine whether to install perl also as /usr/bin/perl
: for archive libraries. Thank you, Linux.
case "$nm_so_opt" in
'') case "$myuname" in
- *linux*)
+ *linux*|gnu*)
if $nm --help | $grep 'dynamic' > /dev/null 2>&1; then
nm_so_opt='--dynamic'
fi
'') dflt="$dflt +vnocompatwarnings" ;;
esac
;;
- linux|irix*) dflt='-shared' ;;
+ linux|irix*|gnu*) dflt='-shared' ;;
next) dflt='none' ;;
solaris) dflt='-G' ;;
sunos) dflt='-assert nodefinitions' ;;
EOM
case "$ccdlflags" in
'') case "$osname" in
- linux|hpux) dflt='-Wl,-E' ;;
+ linux|hpux|gnu*) dflt='-Wl,-E' ;;
next|sunos) dflt='none' ;;
*) dflt='none' ;;
esac ;;
your system supports dynamic loading, it is probably possible to build
a shared libperl.$so. If you will have more than one executable linked
to libperl.$so, this will significantly reduce the size of each
-executable, but it may have a noticeable affect on performance. The
+executable, but it may have a noticeable effect on performance. The
default is probably sensible for your system.
$also
dflt=libperl.5.$so
# XXX How handle the --version stuff for MAB?
;;
- linux*) # ld won't link with a bare -lperl otherwise.
+ linux*|gnu*) # ld won't link with a bare -lperl otherwise.
dflt=libperl.$so
;;
cygwin*) # ld links against an importlib
solaris)
xxx="-R $shrpdir"
;;
- freebsd|netbsd|openbsd)
+ freebsd|netbsd|openbsd|interix|dragonfly)
xxx="-Wl,-R$shrpdir"
;;
- bsdos|linux|irix*|dec_osf)
+ bsdos|linux|irix*|dec_osf|gnu*)
xxx="-Wl,-rpath,$shrpdir"
;;
next)
if $test "X$man1direxp" != "X$ansexp"; then
installman1dir=''
fi
-man1dir="$ans"
-man1direxp="$ansexp"
+prefixvar=man1dir
+. ./setprefixvar
+
case "$man1dir" in
'') man1dir=' '
installman1dir='';;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installman1dir=`echo $man1direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installman1dir="$man1direxp"
-fi
-
: What suffix to use on installed man pages
case "$man1dir" in
case "$d_flexfnam" in
undef)
$cat <<'EOM'
-However, your system can't handle the long file names like File::Basename.3.
+However, your system can't handle the long file names like File::Basename.3.
EOM
case "$man3dir" in
'') man3dir="none";;
cat <<EOM >&4
WARNING: Previous versions of perl installed man3 pages into
-$privlib/man/man3. This version will suggest a
-new default of $dflt.
+$privlib/man/man3. This version will suggest a
+new default of $dflt.
EOM
tdflt=$dflt
dflt='n'
fn=dn+~
rp="Where do the $package library man pages (source) go?"
. ./getfile
-man3dir="$ans"
-man3direxp="$ansexp"
+prefixvar=man3dir
+. ./setprefixvar
+
case "$man3dir" in
'') man3dir=' '
installman3dir='';;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installman3dir=`echo $man3direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installman3dir="$man3direxp"
-fi
-
: What suffix to use on installed man pages
case "$man3dir" in
' ')
esac
: figure out how to guarantee perl startup
+: XXX Note that this currently takes advantage of the bug that binexp ignores
+: the Configure -Dinstallprefix setting, which in turn means that under
+: relocatable @INC, initialinstalllocation is what binexp started as.
case "$startperl" in
'')
case "$sharpbang" in
I can use the #! construct to start perl on your system. This will
make startup of perl scripts faster, but may cause problems if you
want to share those scripts and perl is not in a standard place
-($binexp/perl) on all your platforms. The alternative is to force
-a shell by starting the script with a single ':' character.
+($initialinstalllocation/perl) on all your platforms. The alternative
+is to force a shell by starting the script with a single ':' character.
EOH
case "$versiononly" in
- "$define") dflt="$binexp/perl$version";;
- *) dflt="$binexp/perl";;
+ "$define") dflt="$initialinstalllocation/perl$version";;
+ *) dflt="$initialinstalllocation/perl";;
esac
rp='What shall I put after the #! to start up perl ("none" to not use #!)?'
. ./myread
case "$perlpath" in
'')
case "$versiononly" in
- "$define") perlpath="$binexp/perl$version";;
- *) perlpath="$binexp/perl";;
+ "$define") perlpath="$initialinstalllocation/perl$version";;
+ *) perlpath="$initialinstalllocation/perl";;
esac
case "$startperl" in
*!*) ;;
I will use the "eval 'exec'" idiom to start Perl on your system.
I can use the full path of your Perl binary for this purpose, but
doing so may cause problems if you want to share those scripts and
-Perl is not always in a standard place ($binexp/perl).
+Perl is not always in a standard place ($initialinstalllocation/perl).
EOH
- dflt="$binexp/perl"
+ dflt="$initialinstalllocation/perl"
rp="What path shall I use in \"eval 'exec'\"?"
. ./myread
perlpath="$ans"
;;
esac
$cat <<EOM
-
+
Some installations have a separate directory just for executable scripts so
that they can mount it across multiple architectures but keep the scripts in
one spot. You might, for example, have a subdirectory of /usr/share for this.
Or you might just lump your scripts in with all your other executables.
-
+
EOM
fn=d~
rp='Where do you keep publicly executable scripts?'
if $test "X$ansexp" != "X$scriptdirexp"; then
installscript=''
fi
-scriptdir="$ans"
-scriptdirexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installscript=`echo $scriptdirexp | sed "s#^$prefix#$installprefix#"`
-else
- installscript="$scriptdirexp"
-fi
+installscriptdir=''
+prefixvar=scriptdir
+. ./setprefixvar
+: A little fix up for an irregularly named variable.
+installscript="$installscriptdir"
: determine where add-on public executables go
case "$sitebin" in
fn=d~
rp='Pathname where the add-on public executables should be installed?'
. ./getfile
-sitebin="$ans"
-sitebinexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitebin=`echo $sitebinexp | sed "s#^$prefix#$installprefix#"`
-else
- installsitebin="$sitebinexp"
-fi
+prefixvar=sitebin
+. ./setprefixvar
: determine where add-on html pages go
: There is no standard location, so try to copy the previously-selected
fn=dn+~
rp='Pathname where the site-specific html pages should be installed?'
. ./getfile
-sitehtml1dir="$ans"
-sitehtml1direxp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitehtml1dir=`echo $sitehtml1direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installsitehtml1dir="$sitehtml1direxp"
-fi
+prefixvar=sitehtml1dir
+. ./setprefixvar
: determine where add-on library html pages go
: There is no standard location, so try to copy the previously-selected
fn=dn+~
rp='Pathname where the site-specific library html pages should be installed?'
. ./getfile
-sitehtml3dir="$ans"
-sitehtml3direxp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitehtml3dir=`echo $sitehtml3direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installsitehtml3dir="$sitehtml3direxp"
-fi
+prefixvar=sitehtml3dir
+. ./setprefixvar
: determine where add-on manual pages go
case "$siteman1dir" in
'') dflt=`echo $man1dir | $sed "s#^$prefix#$siteprefix#"` ;;
-*) dflt=$siteman1dir ;;
+*) dflt=$siteman1dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname where the site-specific manual pages should be installed?'
. ./getfile
-siteman1dir="$ans"
-siteman1direxp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsiteman1dir=`echo $siteman1direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installsiteman1dir="$siteman1direxp"
-fi
+prefixvar=siteman1dir
+. ./setprefixvar
: determine where add-on library man pages go
case "$siteman3dir" in
'') dflt=`echo $man3dir | $sed "s#^$prefix#$siteprefix#"` ;;
-*) dflt=$siteman3dir ;;
+*) dflt=$siteman3dir ;;
esac
case "$dflt" in
''|' ') dflt=none ;;
fn=dn+~
rp='Pathname where the site-specific library manual pages should be installed?'
. ./getfile
-siteman3dir="$ans"
-siteman3direxp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsiteman3dir=`echo $siteman3direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installsiteman3dir="$siteman3direxp"
-fi
+prefixvar=siteman3dir
+. ./setprefixvar
: determine where add-on public executable scripts go
case "$sitescript" in
fn=d~+
rp='Pathname where add-on public executable scripts should be installed?'
. ./getfile
-sitescript="$ans"
-sitescriptexp="$ansexp"
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installsitescript=`echo $sitescriptexp | sed "s#^$prefix#$installprefix#"`
-else
- installsitescript="$sitescriptexp"
-fi
+prefixvar=sitescript
+. ./setprefixvar
case "$usefaststdio" in
$define|true|[yY]*|'')
vendorbinexp="$ansexp"
;;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorbin=`echo $vendorbinexp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorbin="$vendorbinexp"
-fi
+prefixvar=vendorbin
+. ./installprefix
case "$vendorprefix" in
'') vendorhtml1dir=''
esac
: Use ' ' for none so value is preserved next time through Configure
$test X"$vendorhtml1dir" = "X" && vendorhtml1dir=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorhtml1dir=`echo $vendorhtml1direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorhtml1dir="$vendorhtml1direxp"
-fi
+prefixvar=vendorhtml1dir
+. ./installprefix
case "$vendorprefix" in
'') vendorhtml3dir=''
esac
: Use ' ' for none so value is preserved next time through Configure
$test X"$vendorhtml3dir" = "X" && vendorhtml3dir=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorhtml3dir=`echo $vendorhtml3direxp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorhtml3dir="$vendorhtml3direxp"
-fi
+prefixvar=vendorhtml3dir
+. ./installprefix
case "$vendorprefix" in
'') vendorman1dir=''
esac
: Use ' ' for none so value is preserved next time through Configure
$test X"$vendorman1dir" = "X" && vendorman1dir=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorman1dir=`echo "$vendorman1direxp" | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorman1dir="$vendorman1direxp"
-fi
+prefixvar=vendorman1dir
+. ./installprefix
case "$vendorprefix" in
'') vendorman3dir=''
esac
: Use ' ' for none so value is preserved next time through Configure
$test X"$vendorman3dir" = "X" && vendorman3dir=' '
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorman3dir=`echo "$vendorman3direxp" | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorman3dir="$vendorman3direxp"
-fi
+prefixvar=vendorman3dir
+. ./installprefix
case "$vendorprefix" in
'') d_vendorscript="$undef"
esac
$cat <<EOM
-The installation process will create a directory for
+The installation process will create a directory for
vendor-supplied scripts.
EOM
vendorscriptexp="$ansexp"
;;
esac
-: Change installation prefix, if necessary.
-if $test X"$prefix" != X"$installprefix"; then
- installvendorscript=`echo $vendorscriptexp | $sed "s#^$prefix#$installprefix#"`
-else
- installvendorscript="$vendorscriptexp"
-fi
+prefixvar=vendorscript
+. ./installprefix
: see if qgcvt exists
set qgcvt d_qgcvt
set atoll d_atoll
eval $inlibc
-: Look for GNU-cc style attribute checking
+: Look for GCC-style attribute format
+case "$d_attribute_format" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((format)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+void my_special_printf(char* pat,...) __attribute__((__format__(__printf__,1,2)));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((format))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((format))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_format" ;;
+esac
+set d_attribute_format
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute malloc
+case "$d_attribute_malloc" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((malloc)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+char *go_get_some_memory( int how_many_bytes ) __attribute__((malloc));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((malloc))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((malloc))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_malloc" ;;
+esac
+set d_attribute_malloc
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute nonnull
+case "$d_attribute_nonnull" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((nonnull(1))) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+void do_something (char *some_pointer,...) __attribute__((nonnull(1)));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((nonnull))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((nonnull))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_nonnull" ;;
+esac
+set d_attribute_nonnull
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute noreturn
+case "$d_attribute_noreturn" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((noreturn)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+void fall_over_dead( void ) __attribute__((noreturn));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((noreturn))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((noreturn))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_noreturn" ;;
+esac
+set d_attribute_noreturn
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute pure
+case "$d_attribute_pure" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((pure)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+int square( int n ) __attribute__((pure));
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((pure))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((pure))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_pure" ;;
+esac
+set d_attribute_pure
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute unused
+case "$d_attribute_unused" in
+'')
+echo " "
+echo "Checking whether your compiler can handle __attribute__((unused)) ..." >&4
+$cat >attrib.c <<'EOCP'
+#include <stdio.h>
+int do_something( int dummy __attribute__((unused)), int n );
+EOCP
+if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
+ if $contains 'warning' attrib.out >/dev/null 2>&1; then
+ echo "Your C compiler doesn't support __attribute__((unused))."
+ val="$undef"
+ else
+ echo "Your C compiler supports __attribute__((unused))."
+ val="$define"
+ fi
+else
+ echo "Your C compiler doesn't seem to understand __attribute__ at all."
+ val="$undef"
+fi
+;;
+*) val="$d_attribute_unused" ;;
+esac
+set d_attribute_unused
+eval $setvar
+$rm -f attrib*
+
+: Look for GCC-style attribute warn_unused_result
+case "$d_attribute_warn_unused_result" in
+'')
echo " "
-echo "Checking whether your compiler can handle __attribute__ ..." >&4
+echo "Checking whether your compiler can handle __attribute__((warn_unused_result)) ..." >&4
$cat >attrib.c <<'EOCP'
#include <stdio.h>
-void croak (char* pat,...) __attribute__((__format__(__printf__,1,2),noreturn));
+int I_will_not_be_ignored(void) __attribute__((warn_unused_result));
EOCP
if $cc $ccflags -c attrib.c >attrib.out 2>&1 ; then
if $contains 'warning' attrib.out >/dev/null 2>&1; then
- echo "Your C compiler doesn't fully support __attribute__."
+ echo "Your C compiler doesn't support __attribute__((warn_unused_result))."
val="$undef"
else
- echo "Your C compiler supports __attribute__."
+ echo "Your C compiler supports __attribute__((warn_unused_result))."
val="$define"
fi
else
echo "Your C compiler doesn't seem to understand __attribute__ at all."
val="$undef"
fi
-set d_attribut
+;;
+*) val="$d_attribute_warn_unused_result" ;;
+esac
+set d_attribute_warn_unused_result
eval $setvar
$rm -f attrib*
set d_bsdsetpgrp
eval $setvar
$rm -f try try.*
+: Look for GCC-style __builtin_choose_expr
+case "$d_builtin_choose_expr" in
+'')
+ echo " "
+ echo "Checking whether your compiler can handle __builtin_choose_expr ..." >&4
+ $cat >try.c <<'EOCP'
+#include <assert.h>
+#include <stdlib.h>
+#include <stdio.h>
+
+#define SYRINX(x) __builtin_choose_expr( x, (1056*2), (103*50) )
+
+int main(void) {
+ assert( SYRINX(1) == 2112 );
+ assert( SYRINX(1) != 5150 );
+ assert( SYRINX(0) == 5150 );
+ assert( SYRINX(0) != 2112 );
+ puts( "All good!" );
+ exit(0);
+}
+
+EOCP
+ set try
+ if eval $compile; then
+ echo "Your C compiler supports __builtin_choose_expr."
+ val="$define"
+ else
+ echo "Your C compiler doesn't seem to understand __builtin_choose_expr."
+ val="$undef"
+ fi
+;;
+*) val="$d_builtin_choose_expr" ;;
+esac
+
+set d_builtin_choose_expr
+eval $setvar
+$rm -f try.* try core core.try.*
+
+: Look for GCC-style __builtin_expect
+case "$d_builtin_expect" in
+'')
+ echo " "
+ echo "Checking whether your compiler can handle __builtin_expect ..." >&4
+ $cat >builtin.c <<'EOCP'
+int main(void) {
+ int n = 50;
+ if ( __builtin_expect(n, 0) ) n = 1;
+}
+EOCP
+ set try
+ if eval $compile; then
+ echo "Your C compiler supports __builtin_choose_expr."
+ val="$define"
+ else
+ echo "Your C compiler doesn't seem to understand __builtin_choose_expr."
+ val="$undef"
+ fi
+ ;;
+*) val="$d_builtin_expect" ;;
+esac
+
+set d_builtin_expect
+eval $setvar
+$rm -f try.* try core core.try.*
+
: see if bzero exists
set bzero d_bzero
eval $inlibc
+: see if stdarg is available
+echo " "
+if $test `./findhdr stdarg.h`; then
+ echo "<stdarg.h> found." >&4
+ valstd="$define"
+else
+ echo "<stdarg.h> NOT found." >&4
+ valstd="$undef"
+fi
+
+: see if varags is available
+echo " "
+if $test `./findhdr varargs.h`; then
+ echo "<varargs.h> found." >&4
+else
+ echo "<varargs.h> NOT found, but that's ok (I hope)." >&4
+fi
+
+: set up the varargs testing programs
+$cat > varargs.c <<EOP
+#ifdef I_STDARG
+#include <stdarg.h>
+#endif
+#ifdef I_VARARGS
+#include <varargs.h>
+#endif
+
+#ifdef I_STDARG
+int f(char *p, ...)
+#else
+int f(va_alist)
+va_dcl
+#endif
+{
+ va_list ap;
+#ifndef I_STDARG
+ char *p;
+#endif
+#ifdef I_STDARG
+ va_start(ap,p);
+#else
+ va_start(ap);
+ p = va_arg(ap, char *);
+#endif
+ va_end(ap);
+}
+EOP
+$cat > varargs <<EOP
+$startsh
+if $cc -c $ccflags -D\$1 varargs.c >/dev/null 2>&1; then
+ echo "true"
+else
+ echo "false"
+fi
+$rm -f varargs$_o
+EOP
+chmod +x varargs
+
+: now check which varargs header should be included
+echo " "
+i_varhdr=''
+case "$valstd" in
+"$define")
+ if `./varargs I_STDARG`; then
+ val='stdarg.h'
+ elif `./varargs I_VARARGS`; then
+ val='varargs.h'
+ fi
+ ;;
+*)
+ if `./varargs I_VARARGS`; then
+ val='varargs.h'
+ fi
+ ;;
+esac
+case "$val" in
+'')
+echo "I could not find the definition for va_dcl... You have problems..." >&4
+ val="$undef"; set i_stdarg; eval $setvar
+ val="$undef"; set i_varargs; eval $setvar
+ ;;
+*)
+ set i_varhdr
+ eval $setvar
+ case "$i_varhdr" in
+ stdarg.h)
+ val="$define"; set i_stdarg; eval $setvar
+ val="$undef"; set i_varargs; eval $setvar
+ ;;
+ varargs.h)
+ val="$undef"; set i_stdarg; eval $setvar
+ val="$define"; set i_varargs; eval $setvar
+ ;;
+ esac
+ echo "We'll include <$i_varhdr> to get va_dcl definition." >&4;;
+esac
+$rm -f varargs*
+
+: see if the Compiler supports C99 variadic macros
+case "$i_stdarg$i_stdlib" in
+ "$define$define")
+ echo "You have <stdarg.h> and <stdlib.h>, so checking for C99 variadic macros." >&4
+ $cat >try.c <<EOCP
+#include <stdio.h>
+#include <stdarg.h>
+
+#define foo(buffer, format, ...) sprintf(buffer, format, __VA_ARGS__)
+
+int main() {
+ char buf[20];
+ foo(buf, "%d %g %.*s", 123, 456.0, (int)3, "789fail");
+ puts(buf);
+ return 0;
+}
+EOCP
+ set try
+ if eval $compile && $run ./try 2>&1 >/dev/null; then
+ case "`$run ./try`" in
+ "123 456 789")
+ echo "You have C99 variadic macros." >&4
+ d_c99_variadic_macros="$define"
+ ;;
+ *)
+ echo "You don't have functional C99 variadic macros." >&4
+ d_c99_variadic_macros="$undef"
+ ;;
+ esac
+ else
+ echo "I couldn't compile and run the test program, so I assume that you don't have functional C99 variadic macros." >&4
+ d_c99_variadic_macros="$undef"
+ fi
+ $rm -f try.* try core core.try.*
+ ;;
+ *)
+ echo "You don't have <stdarg.h> and <stdlib.h>, so not checking for C99 variadic macros." >&4
+ d_c99_variadic_macros="$undef"
+ ;;
+esac
+
: see if signal is declared as pointer to function returning int or void
echo " "
xxx=`./findhdr signal.h`
set class d_class
eval $inlibc
+: see if clearenv exists
+set clearenv d_clearenv
+eval $inlibc
+
hasstruct='varname=$1; struct=$2; shift; shift;
while $test $# -ge 2; do
case "$1" in
exit(1);
}
EOM
+val=$undef
set dirfd
if eval $compile; then
val="$define"
8) echo "(Your long is 64 bits, so you could use ftell.)" ;;
esac
+d_futimes="$undef"
+: check for a working futimes
+echo " "
+echo "Checking for a working futimes()" >&4
+$cat >try.c <<EOCP
+#include <stdio.h>
+#include <sys/time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+int main ()
+{
+ int fd, rv;
+ fd = open ("try.c", O_RDWR);
+ if (-1 == fd) exit (1);
+ rv = futimes (fd, NULL);
+ exit (rv == -1 ? errno : 0);
+}
+EOCP
+set try
+if eval $compile; then
+ `$run ./try`
+ rc=$?
+ case "$rc" in
+ 0) echo "Yes, it does" >&4
+ d_futimes="$define"
+ ;;
+ *) echo "No, it has futimes, but it isn't working ($rc) (probably harmless)\n" >&4
+ ;;
+ esac
+else
+ echo "No, it does not (probably harmless)\n" >&4
+fi
+$rm -f try.* try core core.try.*
+
: see if getcwd exists
set getcwd d_getcwd
eval $inlibc
set d_ldbl_dig
eval $setvar
+: see if this is a math.h system
+set math.h i_math
+eval $inhdr
+
+d_libm_lib_version="$undef"
+case $i_math in
+ $define)
+ : check to see if math.h defines _LIB_VERSION
+ echo " "
+ echo "Checking to see if your libm supports _LIB_VERSION..." >&4
+ $cat >try.c <<EOCP
+#include <unistd.h>
+#include <math.h>
+int main (int argc, char *argv[])
+{
+ printf ("%d\n", _LIB_VERSION);
+ return (0);
+ } /* main */
+EOCP
+ set try
+ if eval $compile; then
+ foo=`$run ./try`
+ echo "Yes, it does ($foo)" >&4
+ d_libm_lib_version="$define"
+ else
+ echo "No, it does not (probably harmless)\n" >&4
+ fi
+ $rm -f try.* try core core.try.*
+ ;;
+
+ esac
+
: see if link exists
set link d_link
eval $inlibc
set madvise d_madvise
eval $inlibc
+: see if malloc_size exists
+set malloc_size d_malloc_size
+eval $inlibc
+
+: see if malloc_size_good exists
+set malloc_good_size d_malloc_good_size
+eval $inlibc
+
: see if mblen exists
set mblen d_mblen
eval $inlibc
: see if prototype for modfl is available
echo " "
-set d_modflproto modfl math.h
+set d_modflproto modfl $i_math math.h
eval $hasproto
d_modfl_pow32_bug="$undef"
if (($uvtype)d != (u - 1))
break;
#ifdef SIGFPE
- if (bletched) {
- break;
+ if (bletched) {
+ break;
+#endif
+ }
+ }
+ printf("%d\n", ((i == n) ? -n : i));
+ exit(0);
+}
+EOP
+set try
+
+d_nv_preserves_uv="$undef"
+if eval $compile; then
+ nv_preserves_uv_bits="`$run ./try`"
+fi
+case "$nv_preserves_uv_bits" in
+\-[1-9]*)
+ nv_preserves_uv_bits=`expr 0 - $nv_preserves_uv_bits`
+ $echo "Your NVs can preserve all $nv_preserves_uv_bits bits of your UVs." 2>&1
+ d_nv_preserves_uv="$define"
+ ;;
+[1-9]*) $echo "Your NVs can preserve only $nv_preserves_uv_bits bits of your UVs." 2>&1
+ d_nv_preserves_uv="$undef" ;;
+*) $echo "Can't figure out how many bits your NVs preserve." 2>&1
+ nv_preserves_uv_bits="$undef" ;;
+esac
+
+$rm -f try.* try
+
+$echo "Checking whether NV 0.0 is all bits zero in memory..." >&4
+: volatile so that the compiler has to store it out to memory.
+if test X"$d_volatile" = X"$define"; then
+ volatile=volatile
+fi
+$cat <<EOP >try.c
+#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+#$i_string I_STRING
+#ifdef I_STRING
+# include <string.h>
+#else
+# include <strings.h>
+#endif
+#include <sys/types.h>
+#include <signal.h>
+#ifdef SIGFPE
+$volatile int bletched = 0;
+$signal_t blech(s) int s; { bletched = 1; }
+#endif
+
+int checkit($nvtype d, char *where) {
+ unsigned char *p = (char *)&d;
+ unsigned char *end = p + sizeof(d);
+ int fail = 0;
+
+ while (p < end)
+ fail += *p++;
+
+ if (!fail)
+ return 0;
+
+ p = (char *)&d;
+ printf("No - %s: 0x", where);
+ while (p < end)
+ printf ("%02X", *p++);
+ printf("\n");
+ return 1;
+}
+
+int main(int argc, char **argv) {
+ $nvtype d = 0.0;
+ int fail = 0;
+ fail += checkit(d, "0.0");
+
+ /* The compiler shouldn't be assuming that bletched is 0 */
+ d = bletched;
+
+ fail += checkit(d, "bleched");
+
+#ifdef SIGFPE
+ signal(SIGFPE, blech);
#endif
- }
+
+ /* Paranoia - the compiler should have no way of knowing that ANSI says
+ that argv[argc] will always be NULL. Actually, if it did assume this it
+ would be buggy, as this is C and main() can be called from elsewhere in
+ the program. */
+ d = argv[argc] ? 1 : 0;
+
+ if (d) {
+ printf("Odd argv[argc]=%p, d=%g\n", argv[argc], d);
}
- printf("%d\n", ((i == n) ? -n : i));
- exit(0);
+
+ fail += checkit(d, "ternary");
+
+ memset(&d, sizeof(d), argv[argc] ? 1 : 0);
+
+ if (d != 0.0) {
+ printf("No - memset doesn't give 0.0\n");
+ /* This might just blow up: */
+ printf("(gives %g)\n", d);
+ return 1;
+ }
+
+#ifdef SIGFPE
+ if (bletched) {
+ printf("No - something bleched\n");
+ return 1;
+ }
+#endif
+ if (fail) {
+ printf("No - %d fail(s)\n", fail);
+ return 1;
+ }
+ printf("Yes\n");
+ return 0;
}
EOP
set try
-d_nv_preserves_uv="$undef"
+d_nv_zero_is_allbits_zero="$undef"
if eval $compile; then
- nv_preserves_uv_bits="`$run ./try`"
+ xxx="`$run ./try`"
+ case "$?" in
+ 0)
+ case "$xxx" in
+ Yes) cat >&4 <<EOM
+0.0 is represented as all bits zero in memory
+EOM
+ d_nv_zero_is_allbits_zero="$define"
+ ;;
+ *) cat >&4 <<EOM
+0.0 is not represented as all bits zero in memory
+EOM
+ d_nv_zero_is_allbits_zero="$undef"
+ ;;
+ esac
+ ;;
+ *) cat >&4 <<EOM
+0.0 is not represented as all bits zero in memory
+EOM
+ d_nv_zero_is_allbits_zero="$undef"
+ ;;
+ esac
fi
-case "$nv_preserves_uv_bits" in
-\-[1-9]*)
- nv_preserves_uv_bits=`expr 0 - $nv_preserves_uv_bits`
- $echo "Your NVs can preserve all $nv_preserves_uv_bits bits of your UVs." 2>&1
- d_nv_preserves_uv="$define"
- ;;
-[1-9]*) $echo "Your NVs can preserve only $nv_preserves_uv_bits bits of your UVs." 2>&1
- d_nv_preserves_uv="$undef" ;;
-*) $echo "Can't figure out how many bits your NVs preserve." 2>&1
- nv_preserves_uv_bits="$undef" ;;
-esac
$rm -f try.* try
#endif
END
: see whether semctl IPC_STAT can use union semun
- val="$undef"
case "$d_semctl_semun" in
'')
+ val="$undef"
$cat > try.c <<END
#include <sys/types.h>
#include <sys/ipc.h>
printf("semctl IPC_STAT failed: errno = %d\n", errno);
# ifdef IPC_RMID
if (semctl(sem, 0, IPC_RMID, arg) != 0)
-# endif /* IPC_RMID */
+# endif /* IPC_RMID */
printf("semctl IPC_RMID failed: errno = %d\n", errno);
} else
#endif /* IPC_PRIVATE && ... */
esac
fi
$rm -f try try.c
+ set d_semctl_semun
+ eval $setvar
;;
esac
- set d_semctl_semun
- eval $setvar
case "$d_semctl_semun" in
$define)
echo "You can use union semun for semctl IPC_STAT." >&4
esac
: see whether semctl IPC_STAT can use struct semid_ds pointer
- val="$undef"
case "$d_semctl_semid_ds" in
'')
+ val="$undef"
$cat > try.c <<'END'
#include <sys/types.h>
#include <sys/ipc.h>
esac
fi
$rm -f try try.c
+ set d_semctl_semid_ds
+ eval $setvar
;;
esac
- set d_semctl_semid_ds
- eval $setvar
case "$d_semctl_semid_ds" in
$define)
echo "You can $also use struct semid_ds* for semctl IPC_STAT." >&4
eval $setvar
$rm -f try.c try
+: see if snprintf exists
+set snprintf d_snprintf
+eval $inlibc
+
+: see if vsnprintf exists
+set vsnprintf d_vsnprintf
+eval $inlibc
+
+case "$d_snprintf-$d_vsnprintf" in
+"$define-$define")
+ $cat <<EOM
+Checking whether your snprintf() and vsnprintf() work okay...
+EOM
+ $cat >try.c <<'EOCP'
+/* v?snprintf testing logic courtesy of Russ Allbery.
+ * According to C99:
+ * - if the buffer is too short it still must be \0-terminated
+ * - if the buffer is too short the potentially required length
+ * must be returned and not -1
+ * - if the buffer is NULL the potentially required length
+ * must be returned and not -1 or core dump
+ */
+#include <stdio.h>
+#include <stdarg.h>
+
+char buf[2];
+
+int test (char *format, ...)
+{
+ va_list args;
+ int count;
+
+ va_start (args, format);
+ count = vsnprintf (buf, sizeof buf, format, args);
+ va_end (args);
+ return count;
+}
+
+int main ()
+{
+ return ((test ("%s", "abcd") == 4 && buf[0] == 'a' && buf[1] == '\0'
+ && snprintf (NULL, 0, "%s", "abcd") == 4) ? 0 : 1);
+}
+EOCP
+ set try
+ if eval $compile; then
+ `$run ./try`
+ case "$?" in
+ 0) echo "Your snprintf() and vsnprintf() seem to be working okay." ;;
+ *) cat <<EOM >&4
+Your snprintf() and snprintf() don't seem to be working okay.
+EOM
+ d_snprintf="$undef"
+ d_vsnprintf="$undef"
+ ;;
+ esac
+ else
+ echo "(I can't seem to compile the test program--assuming they don't)"
+ d_snprintf="$undef"
+ d_vsnprintf="$undef"
+ fi
+ $rm -f try.* try core core.try.*
+ ;;
+esac
+
: see if sockatmark exists
set sockatmark d_sockatmark
eval $inlibc
set socks5_init d_socks5_init
eval $inlibc
+: see if sprintf returns the length of the string in the buffer as per ANSI
+$echo "Checking whether sprintf returns the length of the string..." >&4
+$cat <<EOP >try.c
+#include <stdio.h>
+#$i_stdlib I_STDLIB
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+#$i_string I_STRING
+#ifdef I_STRING
+# include <string.h>
+#else
+# include <strings.h>
+#endif
+#$i_math I_MATH
+#ifdef I_MATH
+#include <math.h>
+#endif
+
+char buffer[256];
+
+int check (size_t expect, int test) {
+ size_t got = strlen(buffer);
+ if (expect == got)
+ return 0;
+
+ printf("expected %ld, got %ld in test %d '%s'\n", (long) expect, (long) got,
+ test, buffer);
+ exit (test);
+}
+
+int main(int argc, char **argv) {
+ int test = 0;
+
+ check(sprintf(buffer, ""), ++test);
+ check(sprintf(buffer, "%s %s", "perl", "rules"), ++test);
+ check(sprintf(buffer, "I like %g", atan2(0,-1)), ++test);
+
+ return 0;
+}
+EOP
+set try
+
+d_sprintf_returns_strlen="$undef"
+if eval $compile; then
+ xxx="`$run ./try`"
+ case "$?" in
+ 0) cat >&4 <<EOM
+sprintf returns the length of the string (as ANSI says it should)
+EOM
+ d_sprintf_returns_strlen="$define"
+ ;;
+ *) cat >&4 <<EOM
+sprintf does not return the length of the string (how old is this system?)
+EOM
+ d_sprintf_returns_strlen="$undef"
+ ;;
+ esac
+fi
+
+$rm -f try.* try
+
: see if srand48_r exists
set srand48_r d_srand48_r
eval $inlibc
set unordered d_unordered
eval $inlibc
+: see if unsetenv exists
+set unsetenv d_unsetenv
+eval $inlibc
+
: see if usleep exists
set usleep d_usleep
eval $inlibc
*) groupstype="$gidtype";;
esac
+
+if $test $patchlevel -lt 9; then
+: MAD is not available in 5.8.x or earlier.
+ ans=n;
+else
+ case "$mad" in
+ $define|true|[yY]*) dflt='y' ;;
+ *) dflt='n' ;;
+ esac
+ cat <<EOM
+
+Would you like to build with Misc Attribute Decoration? This is development
+work leading to a Perl 5 to Perl 6 convertor, which imposes a space and speed
+overhead on the interpreter.
+
+If this doesn't make any sense to you, just accept the default '$dflt'.
+EOM
+ rp='Build Perl with MAD?'
+ . ./myread
+fi
+case "$ans" in
+y|Y) val="$define"
+ madlyh='madly.h madly.act madly.tab'
+ madlysrc='madly.c'
+ madlyobj="madly$_o" ;;
+*) val="$undef"
+ madlyh=''
+ madlysrc=''
+ madlyobj='' ;;
+esac
+set mad
+eval $setvar
+
echo " "
echo "Checking if your $make program sets \$(MAKE)..." >&4
case "$make_set_make" in
set mode_t modetype int stdio.h sys/types.h
eval $typedef_ask
-: see if stdarg is available
-echo " "
-if $test `./findhdr stdarg.h`; then
- echo "<stdarg.h> found." >&4
- valstd="$define"
-else
- echo "<stdarg.h> NOT found." >&4
- valstd="$undef"
-fi
-
-: see if varags is available
-echo " "
-if $test `./findhdr varargs.h`; then
- echo "<varargs.h> found." >&4
-else
- echo "<varargs.h> NOT found, but that's ok (I hope)." >&4
-fi
-
-: set up the varargs testing programs
-$cat > varargs.c <<EOP
-#ifdef I_STDARG
-#include <stdarg.h>
-#endif
-#ifdef I_VARARGS
-#include <varargs.h>
-#endif
-
-#ifdef I_STDARG
-int f(char *p, ...)
-#else
-int f(va_alist)
-va_dcl
-#endif
-{
- va_list ap;
-#ifndef I_STDARG
- char *p;
-#endif
-#ifdef I_STDARG
- va_start(ap,p);
-#else
- va_start(ap);
- p = va_arg(ap, char *);
-#endif
- va_end(ap);
-}
-EOP
-$cat > varargs <<EOP
-$startsh
-if $cc -c $ccflags -D\$1 varargs.c >/dev/null 2>&1; then
- echo "true"
-else
- echo "false"
-fi
-$rm -f varargs$_o
-EOP
-chmod +x varargs
-
-: now check which varargs header should be included
-echo " "
-i_varhdr=''
-case "$valstd" in
-"$define")
- if `./varargs I_STDARG`; then
- val='stdarg.h'
- elif `./varargs I_VARARGS`; then
- val='varargs.h'
- fi
- ;;
-*)
- if `./varargs I_VARARGS`; then
- val='varargs.h'
- fi
- ;;
-esac
-case "$val" in
-'')
-echo "I could not find the definition for va_dcl... You have problems..." >&4
- val="$undef"; set i_stdarg; eval $setvar
- val="$undef"; set i_varargs; eval $setvar
- ;;
-*)
- set i_varhdr
- eval $setvar
- case "$i_varhdr" in
- stdarg.h)
- val="$define"; set i_stdarg; eval $setvar
- val="$undef"; set i_varargs; eval $setvar
- ;;
- varargs.h)
- val="$undef"; set i_stdarg; eval $setvar
- val="$define"; set i_varargs; eval $setvar
- ;;
- esac
- echo "We'll include <$i_varhdr> to get va_dcl definition." >&4;;
-esac
-$rm -f varargs*
-
: see if we need va_copy
echo " "
case "$i_stdarg" in
$run ./foobar >/dev/null 2>&1; then
echo "$ar appears to generate random libraries itself."
orderlib=false
- ranlib=":"
+ if [ "X$ranlib" = "X" ]; then
+ ranlib=":"
+ fi
+elif $ar s bar$_a >/dev/null 2>&1 &&
+ $cc -o foobar $ccflags $ldflags foo$_o bar$_a $libs > /dev/null 2>&1 &&
+ $run ./foobar >/dev/null 2>&1; then
+ echo "a table of contents needs to be added with '$ar s'."
+ orderlib=false
+ ranlib="$ar s"
elif $ar ts bar$_a >/dev/null 2>&1 &&
$cc -o foobar $ccflags $ldflags foo$_o bar$_a $libs > /dev/null 2>&1 &&
$run ./foobar >/dev/null 2>&1; then
ranlib=":"
fi
fi
-$rm -f foo* bar*
+$rm -f foo* bar*
: check for type of arguments to select.
case "$selecttype" in
#endif
#ifndef NSIG
+# ifdef _SIG_MAX
+# define NSIG (_SIG_MAX+1)
+# endif
+#endif
+
+#ifndef NSIG
# ifdef MAXSIG
# define NSIG (MAXSIG+1)
# endif
#ifndef NSIG
# ifdef SIGARRAYSIZE
-# define NSIG (SIGARRAYSIZE+1) /* Not sure of the +1 */
+# define NSIG SIGARRAYSIZE /* Assume ary[SIGARRAYSIZE] */
# endif
#endif
: see what type of char stdio uses.
echo " "
-echo '#include <stdio.h>' | $cppstdin $cppminus > stdioh
+echo '#include <stdio.h>' > stdio.c
+$cppstdin $cppminus < stdio.c > stdioh
if $contains 'unsigned.*char.*_ptr;' stdioh >/dev/null 2>&1 ; then
echo "Your stdio uses unsigned chars." >&4
stdchar="unsigned char"
echo "Your stdio uses signed chars." >&4
stdchar="char"
fi
-$rm -f stdioh
-
-
+$rm -f stdio.* stdioh
: see what type uids are declared as in the kernel
echo " "
;;
esac
+
+case "$usesitecustomize" in
+ $define|true|[Yy]*)
+ usesitecustomize="$define"
+ ;;
+ *)
+ usesitecustomize="$undef"
+ ;;
+ esac
+
: determine compiler compiler
case "$yacc" in
'')
-: see if this is a math.h system
-set math.h i_math
-eval $inhdr
-
: see if this is a mntent.h system
set mntent.h i_mntent
eval $inhdr
eval $inhdr
echo " "
-$echo "Guessing which symbols your C compiler and preprocessor define..." >&4
+$echo "Guessing which symbols your C compiler and preprocessor define..." >&4
$cat <<'EOSH' > Cppsym.know
a29k ABI64 aegis AES_SOURCE AIX AIX32 AIX370
AIX41 AIX42 AIX43 AIX_SOURCE aixpc ALL_SOURCE
-alliant alpha am29000 AM29000 AMD64 amiga AMIGAOS AMIX
+alliant alpha am29000 AM29000 AMD64 amd64 amiga AMIGAOS AMIX
ansi ANSI_C_SOURCE apollo ardent ARM32 atarist att386 att3b
BeOS BIG_ENDIAN BIT_MSF bsd BSD bsd43 bsd4_2 bsd4_3 BSD4_3 bsd4_4
BSD_4_3 BSD_4_4 BSD_NET2 BSD_TIME BSD_TYPES BSDCOMPAT bsdi
bull c cadmus clipper CMU COFF COMPILER_VERSION
concurrent convex cpu cray CRAY CRAYMPP ctix CX_UX
-CYGWIN DGUX DGUX_SOURCE DJGPP dmert DOLPHIN DPX2 DSO
+CYGWIN DECC DGUX DGUX_SOURCE DJGPP dmert DOLPHIN DPX2 DSO
Dynix DynixPTX ELF encore EPI EXTENSIONS FAVOR_BSD
FILE_OFFSET_BITS FreeBSD GCC_NEW_VARARGS gcos gcx gimpel
GLIBC GLIBC_MINOR
USE_MISC USE_POSIX USE_POSIX199309 USE_POSIX199506 USE_POSIX2
USE_REENTRANT USE_SVID USE_UNIX98 USE_XOPEN USE_XOPEN_EXTENDED
USGr4 USGr4_2
-Utek UTek UTS UWIN uxpm uxps vax venix VMESA vms xenix Xenix286
+Utek UTek UTS UWIN uxpm uxps vax venix VMESA vms x86_64 xenix Xenix286
XOPEN_SOURCE XOPEN_SOURCE_EXTENDED XPG2 XPG2_EXTENDED
XPG3 XPG3_EXTENDED XPG4 XPG4_EXTENDED
z8000
$startsh
cat <<'EOCP' > try.c
#include <stdio.h>
+#if cpp_stuff == 1
+#define STRINGIFY(a) "a"
+#endif
+#if cpp_stuff == 42
+#define StGiFy(a) #a
+#define STRINGIFY(a) StGiFy(a)
+#endif
+#if $cpp_stuff != 1 && $cpp_stuff != 42
+# include "Bletch: How does this C preprocessor stringify macros?"
+#endif
int main() {
EOCP
$awk \\
EOSH
cat <<'EOSH' >> Cppsym.try
'length($1) > 0 {
- printf "#ifdef %s\n#if %s+0\nprintf(\"%s=%%ld\\n\", (long)%s);\n#else\nprintf(\"%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
- printf "#ifdef _%s\n#if _%s+0\nprintf(\"_%s=%%ld\\n\", (long)_%s);\n#else\nprintf(\"_%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
- printf "#ifdef __%s\n#if __%s+0\nprintf(\"__%s=%%ld\\n\", (long)__%s);\n#else\nprintf(\"__%s\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
- printf "#ifdef __%s__\n#if __%s__+0\nprintf(\"__%s__=%%ld\\n\", (long)__%s__);\n#else\nprintf(\"__%s__\\n\");\n#endif\n#endif\n", $1, $1, $1, $1, $1
+ printf "#ifdef %s\nprintf(\"%s=%%s\\n\", STRINGIFY(%s));\n#endif\n", $1, $1, $1
+ printf "#ifdef _%s\nprintf(\"_%s=%%s\\n\", STRINGIFY(_%s));\n#endif\n", $1, $1, $1
+ printf "#ifdef __%s\nprintf(\"__%s=%%s\\n\", STRINGIFY(__%s));\n#endif\n", $1, $1, $1
+ printf "#ifdef __%s__\nprintf(\"__%s__=%%s\\n\", STRINGIFY(__%s__));\n#endif\n", $1, $1, $1
}' >> try.c
echo 'return 0;}' >> try.c
EOSH
irix-) ccflags="\$ccflags -woff 1178" ;;
os2-*) ccflags="\$ccflags -Zlinker /PM:VIO" ;;
esac
-$cc -o try $optimize \$ccflags $ldflags try.c $libs && $run ./try
+$cc -o try -Dcpp_stuff=$cpp_stuff $optimize \$ccflags $ldflags try.c $libs && $run ./try | $sed 's/ /\\\\ /g'
EOSH
chmod +x Cppsym.try
$eunicefix Cppsym.try
./Cppsym < Cppsym.know > Cppsym.true
+: Add in any linux cpp "predefined macros":
+case "$osname::$gccversion" in
+ *linux*::*.*)
+ tHdrH=_tmpHdr
+ rm -f $tHdrH'.h' $tHdrH
+ touch $tHdrH'.h'
+ if cpp -dM $tHdrH'.h' > $tHdrH'_cppsym.h' && [ -s $tHdrH'_cppsym.h' ]; then
+ sed 's/#define[\ \ ]*//;s/[\ \ ].*$//' <$tHdrH'_cppsym.h' >$tHdrH'_cppsym.real'
+ if [ -s $tHdrH'_cppsym.real' ]; then
+ cat $tHdrH'_cppsym.real' Cppsym.know | sort | uniq | ./Cppsym | sort | uniq > Cppsym.true
+ fi
+ fi
+ rm -f $tHdrH'.h' $tHdrH'_cppsym.h' $tHdrH'_cppsym.real'
+ ;;
+esac
: now check the C compiler for additional symbols
postprocess_cc_v=''
case "$osname" in
$awk '/\=/ { print $0; next }
{ print $0"=1" }' ccsym.raw >ccsym.list
-$awk '/\=/ { print $0; next }
- { print $0"=1" }' Cppsym.true >ccsym.true
-$comm -13 ccsym.true ccsym.list >ccsym.own
-$comm -12 ccsym.true ccsym.list >ccsym.com
-$comm -23 ccsym.true ccsym.list >ccsym.cpp
+$comm -13 Cppsym.true ccsym.list >ccsym.own
+$comm -12 Cppsym.true ccsym.list >ccsym.com
+$comm -23 Cppsym.true ccsym.list >ccsym.cpp
also=''
if $test -z ccsym.raw; then
echo "Your C compiler doesn't seem to define any symbols!" >&4
d_asctime_r='$d_asctime_r'
d_atolf='$d_atolf'
d_atoll='$d_atoll'
-d_attribut='$d_attribut'
+d_attribute_format='$d_attribute_format'
+d_attribute_malloc='$d_attribute_malloc'
+d_attribute_nonnull='$d_attribute_nonnull'
+d_attribute_noreturn='$d_attribute_noreturn'
+d_attribute_pure='$d_attribute_pure'
+d_attribute_unused='$d_attribute_unused'
+d_attribute_warn_unused_result='$d_attribute_warn_unused_result'
d_bcmp='$d_bcmp'
d_bcopy='$d_bcopy'
d_bsd='$d_bsd'
d_bsdgetpgrp='$d_bsdgetpgrp'
d_bsdsetpgrp='$d_bsdsetpgrp'
+d_builtin_choose_expr='$d_builtin_choose_expr'
+d_builtin_expect='$d_builtin_expect'
d_bzero='$d_bzero'
+d_c99_variadic_macros='$d_c99_variadic_macros'
d_casti32='$d_casti32'
d_castneg='$d_castneg'
d_charvspr='$d_charvspr'
d_chroot='$d_chroot'
d_chsize='$d_chsize'
d_class='$d_class'
+d_clearenv='$d_clearenv'
d_closedir='$d_closedir'
d_cmsghdr_s='$d_cmsghdr_s'
d_const='$d_const'
d_fsync='$d_fsync'
d_ftello='$d_ftello'
d_ftime='$d_ftime'
+d_futimes='$d_futimes'
d_getcwd='$d_getcwd'
d_getespwnam='$d_getespwnam'
d_getfsstat='$d_getfsstat'
d_hasmntopt='$d_hasmntopt'
d_htonl='$d_htonl'
d_ilogbl='$d_ilogbl'
+d_inc_version_list='$d_inc_version_list'
d_index='$d_index'
d_inetaton='$d_inetaton'
d_int64_t='$d_int64_t'
d_killpg='$d_killpg'
d_lchown='$d_lchown'
d_ldbl_dig='$d_ldbl_dig'
+d_libm_lib_version='$d_libm_lib_version'
d_link='$d_link'
d_localtime_r='$d_localtime_r'
d_locconv='$d_locconv'
d_lseekproto='$d_lseekproto'
d_lstat='$d_lstat'
d_madvise='$d_madvise'
+d_malloc_good_size='$d_malloc_good_size'
+d_malloc_size='$d_malloc_size'
d_mblen='$d_mblen'
d_mbstowcs='$d_mbstowcs'
d_mbtowc='$d_mbtowc'
d_nice='$d_nice'
d_nl_langinfo='$d_nl_langinfo'
d_nv_preserves_uv='$d_nv_preserves_uv'
+d_nv_zero_is_allbits_zero='$d_nv_zero_is_allbits_zero'
d_off64_t='$d_off64_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
d_sigaction='$d_sigaction'
d_sigprocmask='$d_sigprocmask'
d_sigsetjmp='$d_sigsetjmp'
+d_sitearch='$d_sitearch'
+d_snprintf='$d_snprintf'
d_sockatmark='$d_sockatmark'
d_sockatmarkproto='$d_sockatmarkproto'
d_socket='$d_socket'
d_socklen_t='$d_socklen_t'
d_sockpair='$d_sockpair'
d_socks5_init='$d_socks5_init'
+d_sprintf_returns_strlen='$d_sprintf_returns_strlen'
d_sqrtl='$d_sqrtl'
d_srand48_r='$d_srand48_r'
d_srandom_r='$d_srandom_r'
d_uname='$d_uname'
d_union_semun='$d_union_semun'
d_unordered='$d_unordered'
+d_unsetenv='$d_unsetenv'
d_usleep='$d_usleep'
d_usleepproto='$d_usleepproto'
d_ustat='$d_ustat'
d_voidtty='$d_voidtty'
d_volatile='$d_volatile'
d_vprintf='$d_vprintf'
+d_vsnprintf='$d_vsnprintf'
d_wait4='$d_wait4'
d_waitpid='$d_waitpid'
d_wcstombs='$d_wcstombs'
inc_version_list_init='$inc_version_list_init'
incpath='$incpath'
inews='$inews'
+initialinstalllocation='$initialinstalllocation'
installarchlib='$installarchlib'
installbin='$installbin'
installhtml1dir='$installhtml1dir'
ls='$ls'
lseeksize='$lseeksize'
lseektype='$lseektype'
+mad='$mad'
+madlyh='$madlyh'
+madlyobj='$madlyobj'
+madlysrc='$madlysrc'
mail='$mail'
mailx='$mailx'
make='$make'
useperlio='$useperlio'
useposix='$useposix'
usereentrant='$usereentrant'
+userelocatableinc='$userelocatableinc'
usesfio='$usesfio'
useshrplib='$useshrplib'
+usesitecustomize='$usesitecustomize'
usesocks='$usesocks'
usethreads='$usethreads'
usevendorprefix='$usevendorprefix'
https://perl5.git.perl.org / perl5.git / blobdiff