if (SvTYPE(sv) < SVt_NV) {
/* The logic to use SVt_PVNV if necessary is in sv_upgrade. */
sv_upgrade(sv, SVt_NV);
+ CLANG_DIAG_IGNORE_STMT(-Wthread-safety);
DEBUG_c({
- STORE_LC_NUMERIC_UNDERLYING_SET_STANDARD();
+ DECLARATION_FOR_LC_NUMERIC_MANIPULATION;
+ STORE_LC_NUMERIC_SET_STANDARD();
PerlIO_printf(Perl_debug_log,
"0x%" UVxf " num(%" NVgf ")\n",
PTR2UV(sv), SvNVX(sv));
- RESTORE_LC_NUMERIC_UNDERLYING();
+ RESTORE_LC_NUMERIC();
});
+ CLANG_DIAG_RESTORE_STMT;
+
}
else if (SvTYPE(sv) < SVt_PVNV)
sv_upgrade(sv, SVt_PVNV);
and ideally should be fixed. */
return 0.0;
}
+ CLANG_DIAG_IGNORE_STMT(-Wthread-safety);
DEBUG_c({
- STORE_LC_NUMERIC_UNDERLYING_SET_STANDARD();
+ DECLARATION_FOR_LC_NUMERIC_MANIPULATION;
+ STORE_LC_NUMERIC_SET_STANDARD();
PerlIO_printf(Perl_debug_log, "0x%" UVxf " 2nv(%" NVgf ")\n",
PTR2UV(sv), SvNVX(sv));
- RESTORE_LC_NUMERIC_UNDERLYING();
+ RESTORE_LC_NUMERIC();
});
+ CLANG_DIAG_RESTORE_STMT;
return SvNVX(sv);
}
DECLARATION_FOR_LC_NUMERIC_MANIPULATION;
STORE_LC_NUMERIC_SET_TO_NEEDED();
- local_radix = PL_numeric_local && PL_numeric_radix_sv;
+ local_radix = _NOT_IN_NUMERIC_STANDARD;
if (local_radix && SvCUR(PL_numeric_radix_sv) > 1) {
size += SvCUR(PL_numeric_radix_sv) - 1;
s = SvGROW_mutable(sv, size);
If C<flags> has C<SV_GMAGIC> bit set,
will C<mg_get> on C<sv> if appropriate, else not.
-If C<flags> has C<SV_FORCE_UTF8_UPGRADE> set, this function assumes that the PV
-will expand when converted to UTF-8, and skips the extra work of checking for
-that. Typically this flag is used by a routine that has already parsed the
-string and found such characters, and passes this information on so that the
-work doesn't have to be repeated.
+The C<SV_FORCE_UTF8_UPGRADE> flag is now ignored.
Returns the number of bytes in the converted string.
=cut
-(One might think that the calling routine could pass in the position of the
-first variant character when it has set SV_FORCE_UTF8_UPGRADE, so it wouldn't
-have to be found again. But that is not the case, because typically when the
-caller is likely to use this flag, it won't be calling this routine unless it
-finds something that won't fit into a byte. Otherwise it tries to not upgrade
-and just use bytes. But some things that do fit into a byte are variants in
-utf8, and the caller may not have been keeping track of these.)
-
If the routine itself changes the string, it adds a trailing C<NUL>. Such a
C<NUL> isn't guaranteed due to having other routines do the work in some input
cases, or if the input is already flagged as being in utf8.
-The speed of this could perhaps be improved for many cases if someone wanted to
-write a fast function that counts the number of variant characters in a string,
-especially if it could return the position of the first one.
-
*/
STRLEN
/* This function could be much more efficient if we
* had a FLAG in SVs to signal if there are any variant
* chars in the PV. Given that there isn't such a flag
- * make the loop as fast as possible (although there are certainly ways
- * to speed this up, eg. through vectorization) */
+ * make the loop as fast as possible. */
U8 * s = (U8 *) SvPVX_const(sv);
- U8 * e = (U8 *) SvEND(sv);
U8 *t = s;
- STRLEN two_byte_count;
- if (flags & SV_FORCE_UTF8_UPGRADE) {
- two_byte_count = 0;
- }
- else {
- if (is_utf8_invariant_string_loc(s, SvCUR(sv), (const U8 **) &t)) {
+ if (is_utf8_invariant_string_loc(s, SvCUR(sv), (const U8 **) &t)) {
- /* utf8 conversion not needed because all are invariants. Mark
- * as UTF-8 even if no variant - saves scanning loop */
- SvUTF8_on(sv);
- if (extra) SvGROW(sv, SvCUR(sv) + extra);
- return SvCUR(sv);
- }
-
- /* Here, there is at least one variant, and t points to the first
- * one */
- two_byte_count = 1;
+ /* utf8 conversion not needed because all are invariants. Mark
+ * as UTF-8 even if no variant - saves scanning loop */
+ SvUTF8_on(sv);
+ if (extra) SvGROW(sv, SvCUR(sv) + extra);
+ return SvCUR(sv);
}
- /* Note that the incoming SV may not have a trailing '\0', as certain
- * code in pp_formline can send us partially built SVs.
+ /* Here, there is at least one variant (t points to the first one), so
+ * the string should be converted to utf8. Everything from 's' to
+ * 't - 1' will occupy only 1 byte each on output.
*
- * Here, the string should be converted to utf8, either because of an
- * input flag (which causes two_byte_count to be set to 0), or because
- * a character that requires 2 bytes was found (two_byte_count = 1). t
- * points either to the beginning of the string (if we didn't examine
- * anything), or to the first variant. In either case, everything from
- * s to t - 1 will occupy only 1 byte each on output.
+ * Note that the incoming SV may not have a trailing '\0', as certain
+ * code in pp_formline can send us partially built SVs.
*
* There are two main ways to convert. One is to create a new string
* and go through the input starting from the beginning, appending each
- * converted value onto the new string as we go along. It's probably
- * best to allocate enough space in the string for the worst possible
- * case rather than possibly running out of space and having to
- * reallocate and then copy what we've done so far. Since everything
- * from s to t - 1 is invariant, the destination can be initialized
- * with these using a fast memory copy
- *
- * The other way is to figure out exactly how big the string should be,
- * by parsing the entire input. Then you don't have to make it big
- * enough to handle the worst possible case, and more importantly, if
- * the string you already have is large enough, you don't have to
- * allocate a new string, you can copy the last character in the input
- * string to the final position(s) that will be occupied by the
- * converted string and go backwards, stopping at t, since everything
- * before that is invariant.
- *
- * There are advantages and disadvantages to each method.
+ * converted value onto the new string as we go along. Going this
+ * route, it's probably best to initially allocate enough space in the
+ * string rather than possibly running out of space and having to
+ * reallocate and then copy what we've done so far. Since everything
+ * from 's' to 't - 1' is invariant, the destination can be initialized
+ * with these using a fast memory copy. To be sure to allocate enough
+ * space, one could use the worst case scenario, where every remaining
+ * byte expands to two under UTF-8, or one could parse it and count
+ * exactly how many do expand.
*
- * In the first method, we can allocate a new string, do the memory
- * copy from the s to t - 1, and then proceed through the rest of the
- * string byte-by-byte.
+ * The other way is to unconditionally parse the remainder of the
+ * string to figure out exactly how big the expanded string will be,
+ * growing if needed. Then start at the end of the string and place
+ * the character there at the end of the unfilled space in the expanded
+ * one, working backwards until reaching 't'.
*
- * In the second method, we proceed through the rest of the input
- * string just calculating how big the converted string will be. Then
- * there are two cases:
- * 1) if the string has enough extra space to handle the converted
- * value. We go backwards through the string, converting until we
- * get to the position we are at now, and then stop. If this
- * position is far enough along in the string, this method is
- * faster than the first method above. If the memory copy were
- * the same speed as the byte-by-byte loop, that position would be
- * about half-way, as at the half-way mark, parsing to the end and
- * back is one complete string's parse, the same amount as
- * starting over and going all the way through. Actually, it
- * would be somewhat less than half-way, as it's faster to just
- * count bytes than to also copy, and we don't have the overhead
- * of allocating a new string, changing the scalar to use it, and
- * freeing the existing one. But if the memory copy is fast, the
- * break-even point is somewhere after half way. The counting
- * loop could be sped up by vectorization, etc, to move the
- * break-even point further towards the beginning.
- * 2) if the string doesn't have enough space to handle the converted
- * value. A new string will have to be allocated, and one might
- * as well, given that, start from the beginning doing the first
- * method. We've spent extra time parsing the string and in
- * exchange all we've gotten is that we know precisely how big to
- * make the new one. Perl is more optimized for time than space,
- * so this case is a loser.
- * So what I've decided to do is not use the 2nd method unless it is
- * guaranteed that a new string won't have to be allocated, assuming
- * the worst case. I also decided not to put any more conditions on it
- * than this, for now. It seems likely that, since the worst case is
- * twice as big as the unknown portion of the string (plus 1), we won't
- * be guaranteed enough space, causing us to go to the first method,
- * unless the string is short, or the first variant character is near
- * the end of it. In either of these cases, it seems best to use the
- * 2nd method. The only circumstance I can think of where this would
- * be really slower is if the string had once had much more data in it
- * than it does now, but there is still a substantial amount in it */
+ * The problem with assuming the worst case scenario is that for very
+ * long strings, we could allocate much more memory than actually
+ * needed, which can create performance problems. If we have to parse
+ * anyway, the second method is the winner as it may avoid an extra
+ * copy. The code used to use the first method under some
+ * circumstances, but now that there is faster variant counting on
+ * ASCII platforms, the second method is used exclusively, eliminating
+ * some code that no longer has to be maintained. */
{
- STRLEN invariant_head = t - s;
- STRLEN size = invariant_head + (e - t) * 2 + 1 + extra;
- if (SvLEN(sv) < size) {
-
- /* Here, have decided to allocate a new string */
-
- U8 *dst;
- U8 *d;
-
- Newx(dst, size, U8);
-
- /* If no known invariants at the beginning of the input string,
- * set so starts from there. Otherwise, can use memory copy to
- * get up to where we are now, and then start from here */
-
- if (invariant_head == 0) {
- d = dst;
- } else {
- Copy(s, dst, invariant_head, char);
- d = dst + invariant_head;
- }
-
- while (t < e) {
- append_utf8_from_native_byte(*t, &d);
- t++;
- }
- *d = '\0';
- SvPV_free(sv); /* No longer using pre-existing string */
- SvPV_set(sv, (char*)dst);
- SvCUR_set(sv, d - dst);
- SvLEN_set(sv, size);
- } else {
-
- /* Here, have decided to get the exact size of the string.
- * Currently this happens only when we know that there is
- * guaranteed enough space to fit the converted string, so
- * don't have to worry about growing. If two_byte_count is 0,
- * then t points to the first byte of the string which hasn't
- * been examined yet. Otherwise two_byte_count is 1, and t
- * points to the first byte in the string that will expand to
- * two. Depending on this, start examining at t or 1 after t.
- * */
-
- U8 *d = t + two_byte_count;
-
-
- /* Count up the remaining bytes that expand to two */
-
- while (d < e) {
- const U8 chr = *d++;
- if (! NATIVE_BYTE_IS_INVARIANT(chr)) two_byte_count++;
- }
-
- /* The string will expand by just the number of bytes that
- * occupy two positions. But we are one afterwards because of
- * the increment just above. This is the place to put the
- * trailing NUL, and to set the length before we decrement */
-
- d += two_byte_count;
- SvCUR_set(sv, d - s);
- *d-- = '\0';
+ /* Count the total number of variants there are. We can start
+ * just beyond the first one, which is known to be at 't' */
+ const Size_t invariant_length = t - s;
+ U8 * e = (U8 *) SvEND(sv);
+
+ /* The length of the left overs, plus 1. */
+ const Size_t remaining_length_p1 = e - t;
+
+ /* We expand by 1 for the variant at 't' and one for each remaining
+ * variant (we start looking at 't+1') */
+ Size_t expansion = 1 + variant_under_utf8_count(t + 1, e);
+
+ /* +1 = trailing NUL */
+ Size_t need = SvCUR(sv) + expansion + extra + 1;
+ U8 * d;
+
+ /* Grow if needed */
+ if (SvLEN(sv) < need) {
+ t = invariant_length + (U8*) SvGROW(sv, need);
+ e = t + remaining_length_p1;
+ }
+ SvCUR_set(sv, invariant_length + remaining_length_p1 + expansion);
+ /* Set the NUL at the end */
+ d = (U8 *) SvEND(sv);
+ *d-- = '\0';
- /* Having decremented d, it points to the position to put the
- * very last byte of the expanded string. Go backwards through
- * the string, copying and expanding as we go, stopping when we
- * get to the part that is invariant the rest of the way down */
+ /* Having decremented d, it points to the position to put the
+ * very last byte of the expanded string. Go backwards through
+ * the string, copying and expanding as we go, stopping when we
+ * get to the part that is invariant the rest of the way down */
- e--;
- while (e >= t) {
- if (NATIVE_BYTE_IS_INVARIANT(*e)) {
- *d-- = *e;
- } else {
- *d-- = UTF8_EIGHT_BIT_LO(*e);
- *d-- = UTF8_EIGHT_BIT_HI(*e);
- }
- e--;
- }
- }
+ e--;
+ while (e >= t) {
+ if (NATIVE_BYTE_IS_INVARIANT(*e)) {
+ *d-- = *e;
+ } else {
+ *d-- = UTF8_EIGHT_BIT_LO(*e);
+ *d-- = UTF8_EIGHT_BIT_HI(*e);
+ }
+ e--;
+ }
if (SvTYPE(sv) >= SVt_PVMG && SvMAGIC(sv)) {
/* Update pos. We do it at the end rather than during
}
}
- /* Mark as UTF-8 even if no variant - saves scanning loop */
SvUTF8_on(sv);
return SvCUR(sv);
}
PERL_ARGS_ASSERT_SV_UTF8_DECODE;
if (SvPOKp(sv)) {
- const U8 *start, *c;
+ const U8 *start, *c, *first_variant;
/* The octets may have got themselves encoded - get them back as
* bytes
* we want to make sure everything inside is valid utf8 first.
*/
c = start = (const U8 *) SvPVX_const(sv);
- if (!is_utf8_string(c, SvCUR(sv)))
- return FALSE;
- if (! is_utf8_invariant_string(c, SvCUR(sv))) {
+ if (! is_utf8_invariant_string_loc(c, SvCUR(sv), &first_variant)) {
+ if (!is_utf8_string(first_variant, SvCUR(sv) - (first_variant -c)))
+ return FALSE;
SvUTF8_on(sv);
}
if (SvTYPE(sv) >= SVt_PVMG && SvMAGIC(sv)) {
glob to begin with. */
if(dtype == SVt_PVGV) {
const char * const name = GvNAME((const GV *)dstr);
- if(
- strEQ(name,"ISA")
+ const STRLEN len = GvNAMELEN(dstr);
+ if(memEQs(name, len, "ISA")
/* The stash may have been detached from the symbol table, so
check its name. */
&& GvSTASH(dstr) && HvENAME(GvSTASH(dstr))
)
mro_changes = 2;
else {
- const STRLEN len = GvNAMELEN(dstr);
if ((len > 1 && name[len-2] == ':' && name[len-1] == ':')
|| (len == 1 && name[0] == ':')) {
mro_changes = 3;
}
else if (
stype == SVt_PVAV && sref != dref
- && strEQ(GvNAME((GV*)dstr), "ISA")
+ && memEQs(GvNAME((GV*)dstr), GvNAMELEN((GV*)dstr), "ISA")
/* The stash may have been detached from the symbol table, so
check its name before doing anything. */
&& GvSTASH(dstr) && HvENAME(GvSTASH(dstr))
that pointer (e.g. ptr + 1) be used.
If S<C<flags & SV_SMAGIC>> is true, will call C<SvSETMAGIC>. If
-S<C<flags
> & SV_HAS_TRAILING_NUL>> is true, then C<ptr[len]> must be C<NUL>,
+S<C<flags & SV_HAS_TRAILING_NUL>> is true, then C<ptr[len]> must be C<NUL>,
and the realloc
will be skipped (i.e. the buffer is actually at least 1 byte longer than
C<len>, and already meets the requirements for storing in C<SvPVX>).
STRLEN cur1;
const char *pv2;
STRLEN cur2;
- I32 eq = 0;
- SV* svrecode = NULL;
if (!sv1) {
pv1 = "";
}
if (cur1 == cur2)
- eq = (pv1 == pv2) || memEQ(pv1, pv2, cur1);
-
- SvREFCNT_dec(svrecode);
-
- return eq;
+ return (pv1 == pv2) || memEQ(pv1, pv2, cur1);
+ else
+ return 0;
}
/*
(C<\0>) and other binary data. The reference count for the SV is set to 1.
Note that if C<len> is zero, Perl will create a zero length (Perl) string. You
are responsible for ensuring that the source buffer is at least
-C<len> bytes long. If the C<buffer> argument is NULL the new SV will be
+C<len> bytes long. If the C<s> argument is NULL the new SV will be
undefined.
=cut
assert(!Perl_isinfnan(nv));
if (neg)
nv = -nv;
- if (nv < UV_MAX) {
+ if (nv != 0.0 && nv < UV_MAX) {
char *p = endbuf;
- nv += 0.5;
uv = (UV)nv;
- if (uv & 1 && uv == nv)
- uv--; /* Round to even */
+ if (uv != nv) {
+ nv += 0.5;
+ uv = (UV)nv;
+ if (uv & 1 && uv == nv)
+ uv--; /* Round to even */
+ }
do {
const unsigned dig = uv % 10;
*--p = '0' + dig;
/* In this case there is an implicit bit,
* and therefore the exponent is shifted by one. */
exponent--;
-# else
-# ifdef NV_X86_80_BIT
+# elif defined(NV_X86_80_BIT)
if (subnormal) {
/* The subnormals of the x86-80 have a base exponent of -16382,
* (while the physical exponent bits are zero) but the frexp()
} else {
exponent -= 4;
}
-# endif
/* TBD: other non-implicit-bit platforms than the x86-80. */
# endif
#endif
* the top non-zero nybble. */
for (i = vfnz[0], n = 0; i > 1; i >>= 1, n++) { }
assert(n < 4);
+ assert(vlnz);
vlnz[1] = 0;
for (vshr = vlnz; vshr >= vfnz; vshr--) {
vshr[1] |= (vshr[0] & (0xF >> (4 - n))) << (4 - n);
#ifndef USE_LOCALE_NUMERIC
*p++ = '.';
#else
- if (PL_numeric_radix_sv && IN_LC(LC_NUMERIC)) {
+ if (IN_LC(LC_NUMERIC)) {
STRLEN n;
const char* r = SvPV(PL_numeric_radix_sv, n);
Copy(r, p, n, char);
STRLEN origlen;
Size_t svix = 0;
static const char nullstr[] = "(null)";
- SV *argsv = NULL;
bool has_utf8 = DO_UTF8(sv); /* has the result utf8? */
const bool pat_utf8 = has_utf8; /* the pattern is in utf8? */
/* Times 4: a decimal digit takes more than 3 binary digits.
- * NV_DIG: mantissa takes than many decimal digits.
+ * NV_DIG: mantissa takes that many decimal digits.
* Plus 32: Playing safe. */
char ebuf[IV_DIG * 4 + NV_DIG + 32];
bool no_redundant_warning = FALSE; /* did we use any explicit format parameter index? */
Size_t efix = 0; /* explicit format parameter index */
const Size_t osvix = svix; /* original index in case of bad fmt */
+ SV *argsv = NULL;
bool is_utf8 = FALSE; /* is this item utf8? */
bool arg_missing = FALSE; /* give "Missing argument" warning */
char esignbuf[4]; /* holds sign prefix, e.g. "-0x" */
case 'V':
case 'z':
case 't':
-#ifdef I_STDINT
case 'j':
-#endif
intsize = *q++;
break;
}
if (args) {
eptr = va_arg(*args, char*);
if (eptr)
- elen = strlen(eptr);
+ if (has_precis)
+ elen = my_strnlen(eptr, precis);
+ else
+ elen = strlen(eptr);
else {
eptr = (char *)nullstr;
elen = sizeof nullstr - 1;
case 't': iv = va_arg(*args, ptrdiff_t); break;
#endif
default: iv = va_arg(*args, int); break;
-#ifdef I_STDINT
- case 'j': iv = va_arg(*args, intmax_t); break;
-#endif
+ case 'j': iv = va_arg(*args, PERL_INTMAX_T); break;
case 'q':
#if IVSIZE >= 8
iv = va_arg(*args, Quad_t); break;
* uptrdiff_t, so oh well */
case 't': uv = va_arg(*args, ptrdiff_t); break;
#endif
-#ifdef I_STDINT
- case 'j': uv = va_arg(*args, uintmax_t); break;
-#endif
+ case 'j': uv = va_arg(*args, PERL_UINTMAX_T); break;
default: uv = va_arg(*args, unsigned); break;
case 'q':
#if IVSIZE >= 8
lc_numeric_set = TRUE;
}
- if (PL_numeric_radix_sv && IN_LC(LC_NUMERIC)) {
+ if (IN_LC(LC_NUMERIC)) {
/* this can't wrap unless PL_numeric_radix_sv is a string
* consuming virtually all the 32-bit or 64-bit address
* space
/* hopefully the above makes ptr a very constrained format
* that is safe to use, even though it's not literal */
- GCC_DIAG_IGNORE(-Wformat-nonliteral);
+ GCC_DIAG_IGNORE_STMT(-Wformat-nonliteral);
#ifdef USE_QUADMATH
{
const char* qfmt = quadmath_format_single(ptr);
#else
elen = my_snprintf(PL_efloatbuf, PL_efloatsize, ptr, fv);
#endif
- GCC_DIAG_RESTORE;
+ GCC_DIAG_RESTORE_STMT;
}
eptr = PL_efloatbuf;
#ifdef HAS_PTRDIFF_T
case 't': *(va_arg(*args, ptrdiff_t*)) = i; break;
#endif
-#ifdef I_STDINT
- case 'j': *(va_arg(*args, intmax_t*)) = i; break;
-#endif
+ case 'j': *(va_arg(*args, PERL_INTMAX_T*)) = i; break;
case 'q':
#if IVSIZE >= 8
*(va_arg(*args, Quad_t*)) = i; break;
SvTAINT(sv);
- RESTORE_LC_NUMERIC(); /* Done outside loop, so don't have to save/restore
- each iteration. */
+ if (lc_numeric_set) {
+ RESTORE_LC_NUMERIC(); /* Done outside loop, so don't have to
+ save/restore each iteration. */
+ }
}
/* =========================================================================
Newxz(parser, 1, yy_parser);
ptr_table_store(PL_ptr_table, proto, parser);
- /* XXX these not yet duped */
- parser->old_parser = NULL;
- parser->stack = NULL;
- parser->ps = NULL;
- parser->stack_max1 = 0;
- /* XXX parser->stack->state = 0; */
-
/* XXX eventually, just Copy() most of the parser struct ? */
parser->lex_brackets = proto->lex_brackets;
parser->sig_optelems= proto->sig_optelems;
parser->sig_slurpy = proto->sig_slurpy;
parser->recheck_utf8_validity = proto->recheck_utf8_validity;
- parser->linestr = sv_dup_inc(proto->linestr, param);
{
char * const ols = SvPVX(proto->linestr);
else
LvTARG(dstr) = sv_dup_inc(LvTARG(dstr), param);
if (isREGEXP(sstr)) goto duprex;
+ /* FALLTHROUGH */
case SVt_PVGV:
/* non-GP case already handled above */
if(isGV_with_GP(sstr)) {
SSize_t items = AvFILLp((const AV *)sstr) + 1;
src_ary = AvARRAY((const AV *)sstr);
- Newxz(dst_ary, AvMAX((const AV *)sstr)+1, SV*);
+ Newx(dst_ary, AvMAX((const AV *)sstr)+1, SV*);
ptr_table_store(PL_ptr_table, src_ary, dst_ary);
AvARRAY(MUTABLE_AV(dstr)) = dst_ary;
AvALLOC((const AV *)dstr) = dst_ary;
return nsi;
/* create anew and remember what it is */
- Newxz(nsi, 1, PERL_SI);
+ Newx(nsi, 1, PERL_SI);
ptr_table_store(PL_ptr_table, si, nsi);
nsi->si_stack = av_dup_inc(si->si_stack, param);
nsi->si_prev = si_dup(si->si_prev, param);
nsi->si_next = si_dup(si->si_next, param);
nsi->si_markoff = si->si_markoff;
+#if defined DEBUGGING && !defined DEBUGGING_RE_ONLY
+ nsi->si_stack_hwm = 0;
+#endif
return nsi;
}
PERL_ARGS_ASSERT_SS_DUP;
- Newxz(nss, max, ANY);
+ Newx(nss, max, ANY);
while (ix > 0) {
const UV uv = POPUV(ss,ix);
case SAVEt_AELEM: /* array element */
sv = (const SV *)POPPTR(ss,ix);
TOPPTR(nss,ix) = SvREFCNT_inc(sv_dup_inc(sv, param));
- i = POPINT(ss,ix);
- TOPINT(nss,ix) = i;
+ iv = POPIV(ss,ix);
+ TOPIV(nss,ix) = iv;
av = (const AV *)POPPTR(ss,ix);
TOPPTR(nss,ix) = av_dup_inc(av, param);
break;
PL_filemode = proto_perl->Ifilemode;
PL_lastfd = proto_perl->Ilastfd;
PL_oldname = proto_perl->Ioldname; /* XXX not quite right */
- PL_Argv = NULL;
- PL_Cmd = NULL;
PL_gensym = proto_perl->Igensym;
PL_laststatval = proto_perl->Ilaststatval;
#ifdef USE_LOCALE_NUMERIC
PL_numeric_standard = proto_perl->Inumeric_standard;
- PL_numeric_local = proto_perl->Inumeric_local;
+ PL_numeric_underlying = proto_perl->Inumeric_underlying;
+ PL_numeric_underlying_is_standard = proto_perl->Inumeric_underlying_is_standard;
#endif /* !USE_LOCALE_NUMERIC */
/* Did the locale setup indicate UTF-8? */
PL_utf8locale = proto_perl->Iutf8locale;
PL_in_utf8_CTYPE_locale = proto_perl->Iin_utf8_CTYPE_locale;
PL_in_utf8_COLLATE_locale = proto_perl->Iin_utf8_COLLATE_locale;
+ my_strlcpy(PL_locale_utf8ness, proto_perl->Ilocale_utf8ness, sizeof(PL_locale_utf8ness));
+ PL_lc_numeric_mutex_depth = 0;
/* Unicode features (see perlrun/-C) */
PL_unicode = proto_perl->Iunicode;
PL_subname = sv_dup_inc(proto_perl->Isubname, param);
+#if defined(USE_POSIX_2008_LOCALE) \
+ && defined(USE_THREAD_SAFE_LOCALE) \
+ && ! defined(HAS_QUERYLOCALE)
+ for (i = 0; i < (int) C_ARRAY_LENGTH(PL_curlocales); i++) {
+ PL_curlocales[i] = savepv("."); /* An illegal value */
+ }
+#endif
#ifdef USE_LOCALE_CTYPE
/* Should we warn if uses locale? */
PL_warn_locale = sv_dup_inc(proto_perl->Iwarn_locale, param);
#ifdef USE_LOCALE_NUMERIC
PL_numeric_name = SAVEPV(proto_perl->Inumeric_name);
PL_numeric_radix_sv = sv_dup_inc(proto_perl->Inumeric_radix_sv, param);
+
+# if defined(HAS_POSIX_2008_LOCALE)
+ PL_underlying_numeric_obj = NULL;
+# endif
#endif /* !USE_LOCALE_NUMERIC */
PL_langinfo_buf = NULL;
PL_langinfo_bufsize = 0;
+ PL_setlocale_buf = NULL;
+ PL_setlocale_bufsize = 0;
+
/* Unicode inversion lists */
PL_Latin1 = sv_dup_inc(proto_perl->ILatin1, param);
PL_UpperLatin1 = sv_dup_inc(proto_perl->IUpperLatin1, param);
}
PL_GCB_invlist = sv_dup_inc(proto_perl->IGCB_invlist, param);
PL_SB_invlist = sv_dup_inc(proto_perl->ISB_invlist, param);
+ PL_SCX_invlist = sv_dup_inc(proto_perl->ISCX_invlist, param);
PL_WB_invlist = sv_dup_inc(proto_perl->IWB_invlist, param);
PL_seen_deprecated_macro = hv_dup_inc(proto_perl->Iseen_deprecated_macro, param);
PL_utf8_mark = sv_dup_inc(proto_perl->Iutf8_mark, param);
/* next PUSHMARK() sets *(PL_markstack_ptr+1) */
i = proto_perl->Imarkstack_max - proto_perl->Imarkstack;
- Newxz(PL_markstack, i, I32);
+ Newx(PL_markstack, i, I32);
PL_markstack_max = PL_markstack + (proto_perl->Imarkstack_max
- proto_perl->Imarkstack);
PL_markstack_ptr = PL_markstack + (proto_perl->Imarkstack_ptr
/* next push_scope()/ENTER sets PL_scopestack[PL_scopestack_ix]
* NOTE: unlike the others! */
- Newxz(PL_scopestack, PL_scopestack_max, I32);
+ Newx(PL_scopestack, PL_scopestack_max, I32);
Copy(proto_perl->Iscopestack, PL_scopestack, PL_scopestack_ix, I32);
#ifdef DEBUGGING
- Newxz(PL_scopestack_name, PL_scopestack_max, const char *);
+ Newx(PL_scopestack_name, PL_scopestack_max, const char *);
Copy(proto_perl->Iscopestack_name, PL_scopestack_name, PL_scopestack_ix, const char *);
#endif
/* reset stack AV to correct length before its duped via
if (PL_op) {
desc = PL_op->op_type == OP_STRINGIFY && PL_op->op_folded
? "join or string"
+ : PL_op->op_type == OP_MULTICONCAT
+ && (PL_op->op_private & OPpMULTICONCAT_FAKE)
+ ? "sprintf"
: OP_DESC(PL_op);
if (uninit_sv && PL_curpad) {
varname = find_uninit_var(PL_op, uninit_sv, 0, &desc);
desc = "sort";
/* PL_warn_uninit_sv is constant */
- GCC_DIAG_IGNORE(-Wformat-nonliteral);
+ GCC_DIAG_IGNORE_STMT(-Wformat-nonliteral);
if (desc)
/* diag_listed_as: Use of uninitialized value%s */
Perl_warner(aTHX_ packWARN(WARN_UNINITIALIZED), PL_warn_uninit_sv,
else
Perl_warner(aTHX_ packWARN(WARN_UNINITIALIZED), PL_warn_uninit,
"", "", "");
- GCC_DIAG_RESTORE;
+ GCC_DIAG_RESTORE_STMT;
}
/*
https://perl5.git.perl.org / perl5.git / blobdiff