2 # Makefile to build perl on Windows using DMAKE.
4 # Microsoft Visual C++ 6.0 or later
5 # MinGW with gcc-3.2 or later
6 # Windows SDK 64-bit compiler and tools
8 # This is set up to build a perl.exe that runs off a shared library
9 # (perl519.dll). Also makes individual DLLs for the XS extensions.
13 ## Make sure you read README.win32 *before* you mess with anything here!
17 ## Build configuration. Edit the values below to suit your needs.
21 # Set these to wherever you want "dmake install" to put your
25 INST_TOP *= $(INST_DRV)\perl
28 # Uncomment if you want to build a 32-bit Perl using a 32-bit compiler
29 # on a 64-bit version of Windows.
33 # Comment this out if you DON'T want your perl installation to be versioned.
34 # This means that the new installation will overwrite any files from the
35 # old installation at the same INST_TOP location. Leaving it enabled is
36 # the safest route, as perl adds the extra version directory to all the
37 # locations it installs files to. If you disable it, an alternative
38 # versioned installation can be obtained by setting INST_TOP above to a
39 # path that includes an arbitrary version string.
44 # Comment this out if you DON'T want your perl installation to have
45 # architecture specific components. This means that architecture-
46 # specific files will be installed along with the architecture-neutral
47 # files. Leaving it enabled is safer and more flexible, in case you
48 # want to build multiple flavors of perl and install them together in
49 # the same location. Commenting it out gives you a simpler
50 # installation that is easier to understand for beginners.
52 #INST_ARCH *= \$(ARCHNAME)
55 # Uncomment this if you want perl to run
56 # $Config{sitelibexp}\sitecustomize.pl
57 # before anything else. This script can then be set up, for example,
58 # to add additional entries to @INC.
60 #USE_SITECUST *= define
63 # uncomment to enable multiple interpreters. This is need for fork()
64 # emulation and for thread support.
69 # Interpreter cloning/threads; now reasonably complete.
70 # This should be enabled to get the fork() emulation.
71 # This needs USE_MULTI above.
73 USE_ITHREADS *= define
76 # uncomment to enable the implicit "host" layer for all system calls
77 # made by perl. This needs USE_MULTI above.
78 # This is also needed to get fork().
83 # Comment out next assign to disable perl's I/O subsystem and use compiler's
84 # stdio for IO - depending on your compiler vendor and run time library you may
85 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
86 # You will also be unable to take full advantage of perl5.8's support for multiple
87 # encodings and may see lower IO performance. You have been warned.
91 # Comment this out if you don't want to enable large file support for
92 # some reason. Should normally only be changed to maintain compatibility
93 # with an older release of perl.
94 USE_LARGE_FILES *= define
97 # Uncomment this if you're building a 32-bit perl and want 64-bit integers.
98 # (If you're building a 64-bit perl then you will have 64-bit integers whether
99 # or not this is uncommented.)
100 #USE_64_BIT_INT *= define
103 # uncomment exactly one of the following
105 # Visual C++ 6.x (aka Visual C++ 98)
107 # Visual C++ .NET 2002/2003 (aka Visual C++ 7.x) (full version)
109 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
110 #CCTYPE *= MSVC70FREE
111 # Windows Server 2003 SP1 Platform SDK (April 2005)
113 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
115 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
116 #CCTYPE *= MSVC80FREE
117 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
119 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
120 #CCTYPE *= MSVC90FREE
121 # Visual C++ 2010 (aka Visual C++ 10.x) (full version)
123 # Visual C++ 2010 Express Edition (aka Visual C++ 10.x) (free version)
124 #CCTYPE = MSVC100FREE
125 # Visual C++ 2012 (aka Visual C++ 11.x) (full version)
127 # Visual C++ 2012 Express Edition (aka Visual C++ 11.x) (free version)
128 #CCTYPE = MSVC110FREE
129 # MinGW or mingw-w64 with gcc-3.2 or later
133 # uncomment next line if you want debug version of perl (big,slow)
134 # If not enabled, we automatically try to use maximum optimization
135 # with all compilers that are known to have a working optimizer.
140 # uncomment to enable linking with setargv.obj under the Visual C
141 # compiler. Setting this options enables perl to expand wildcards in
142 # arguments, but it may be harder to use alternate methods like
143 # File::DosGlob that are more powerful. This option is supported only with
146 #USE_SETARGV *= define
149 # set this if you wish to use perl's malloc
150 # WARNING: Turning this on/off WILL break binary compatibility with extensions
151 # you may have compiled with/without it. Be prepared to recompile all
152 # extensions if you change the default. Currently, this cannot be enabled
153 # if you ask for USE_IMP_SYS above.
155 #PERL_MALLOC *= define
158 # set this to enable debugging mstats
159 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
160 # be enabled without PERL_MALLOC as well.
162 #DEBUG_MSTATS *= define
165 # set this to additionally provide a statically linked perl-static.exe.
166 # Note that dynamic loading will not work with this perl, so you must
167 # include required modules statically using the STATIC_EXT or ALL_STATIC
168 # variables below. A static library perl519s.lib will also be created.
169 # Ordinary perl.exe is not affected by this option.
171 #BUILD_STATIC *= define
174 # in addition to BUILD_STATIC the option ALL_STATIC makes *every*
175 # extension get statically built
176 # This will result in a very large perl executable, but the main purpose
177 # is to have proper linking set so as to be able to create miscellaneous
178 # executables with different built-in extensions
180 #ALL_STATIC *= define
183 # set the install locations of the compiler include/libraries
184 # Running VCVARS32.BAT is *required* when using Visual C.
185 # Some versions of Visual C don't define MSVCDIR in the environment,
186 # so you may have to set CCHOME explicitly (spaces in the path name should
189 .IF "$(CCTYPE)" == "GCC"
196 # uncomment this if you are using x86_64-w64-mingw32 cross-compiler
197 # ie if your gcc executable is called 'x86_64-w64-mingw32-gcc'
198 # instead of the usual 'gcc'.
203 # Following sets $Config{incpath} and $Config{libpth}
206 .IF "$(GCCCROSS)" == "define"
207 CCINCDIR *= $(CCHOME)\x86_64-w64-mingw32\include
208 CCLIBDIR *= $(CCHOME)\x86_64-w64-mingw32\lib
209 CCDLLDIR *= $(CCLIBDIR)
211 CCINCDIR *= $(CCHOME)\include
212 CCLIBDIR *= $(CCHOME)\lib
213 CCDLLDIR *= $(CCHOME)\bin
217 # Additional compiler flags can be specified here.
219 BUILDOPT *= $(BUILDOPTEXTRA)
222 # This should normally be disabled. Enabling it will disable the File::Glob
223 # implementation of CORE::glob.
225 #BUILDOPT += -DPERL_EXTERNAL_GLOB
228 # Perl needs to read scripts in text mode so that the DATA filehandle
229 # works correctly with seek() and tell(), or around auto-flushes of
230 # all filehandles (e.g. by system(), backticks, fork(), etc).
232 # The current version on the ByteLoader module on CPAN however only
233 # works if scripts are read in binary mode. But before you disable text
234 # mode script reading (and break some DATA filehandle functionality)
235 # please check first if an updated ByteLoader isn't available on CPAN.
237 BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
240 # specify semicolon-separated list of extra directories that modules will
241 # look for libraries (spaces in path names need not be quoted)
246 # set this to point to cmd.exe (only needed if you use some
247 # alternate shell that doesn't grok cmd.exe style commands)
249 #SHELL *= g:\winnt\system32\cmd.exe
252 # set this to your email address (perl will guess a value from
253 # from your loginname and your hostname, which may not be right)
258 ## Build configuration ends.
261 ##################### CHANGE THESE ONLY IF YOU MUST #####################
264 DEBUG_MSTATS *= undef
266 USE_SITECUST *= undef
268 USE_ITHREADS *= undef
271 USE_LARGE_FILES *= undef
272 USE_64_BIT_INT *= undef
274 .IF "$(USE_IMP_SYS)" == "define"
278 .IF "$(PERL_MALLOC)" == "undef"
282 .IF "$(DEBUG_MSTATS)" == "define"
283 BUILDOPT += -DPERL_DEBUGGING_MSTATS
286 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
290 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
294 .IF "$(USE_SITECUST)" == "define"
295 BUILDOPT += -DUSE_SITECUSTOMIZE
298 .IF "$(USE_MULTI)" != "undef"
299 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
302 .IF "$(USE_IMP_SYS)" != "undef"
303 BUILDOPT += -DPERL_IMPLICIT_SYS
306 .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432 WIN64 CCHOME
308 PROCESSOR_ARCHITECTURE *= x86
311 # When we are running from a 32bit cmd.exe on AMD64 then
312 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
314 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
315 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
317 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
324 .IF "$(WIN64)" == "define"
325 USE_64_BIT_INT = define
328 # Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because
329 # both link against MSVCRT.dll (which is part of Windows itself) and
330 # not against a compiler specific versioned runtime.
331 .IF "$(WIN64)" == "define" && "$(CCTYPE)" == "MSVC60"
335 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
336 .IF "$(ARCHITECTURE)" == "AMD64"
339 .IF "$(ARCHITECTURE)" == "IA64"
343 .IF "$(USE_MULTI)" == "define"
344 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
346 .IF "$(USE_PERLIO)" == "define"
347 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
349 ARCHNAME = MSWin32-$(ARCHITECTURE)
353 .IF "$(USE_PERLIO)" == "define"
354 BUILDOPT += -DUSE_PERLIO
357 .IF "$(USE_ITHREADS)" == "define"
358 ARCHNAME !:= $(ARCHNAME)-thread
361 .IF "$(WIN64)" != "define"
362 .IF "$(USE_64_BIT_INT)" == "define"
363 ARCHNAME !:= $(ARCHNAME)-64int
367 ARCHDIR = ..\lib\$(ARCHNAME)
368 COREDIR = ..\lib\CORE
369 AUTODIR = ..\lib\auto
375 EXTUTILSDIR = $(LIBDIR)\ExtUtils
379 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
380 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
381 INST_LIB = $(INST_TOP)$(INST_VER)\lib
382 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
383 INST_COREDIR = $(INST_ARCHLIB)\CORE
384 INST_HTML = $(INST_TOP)$(INST_VER)\html
387 # Programs to compile, build .lib files and link
392 .IF "$(CCTYPE)" == "GCC"
394 .IF "$(GCCCROSS)" == "define"
395 ARCHPREFIX = x86_64-w64-mingw32-
398 CC = $(ARCHPREFIX)gcc
399 LINK32 = $(ARCHPREFIX)g++
400 LIB32 = $(ARCHPREFIX)ar rc
401 IMPLIB = $(ARCHPREFIX)dlltool
402 RSC = $(ARCHPREFIX)windres
412 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
414 .IF "$(WIN64)" == "define"
415 DEFINES += -DWIN64 -DCONSERVATIVE
417 LOCDEFS = -DPERLDLL -DPERL_CORE
421 # Current releases of MinGW 5.1.4 (as of 11-Aug-2009) will fail to link
422 # correctly if -lmsvcrt is specified explicitly.
428 -lmoldname -lkernel32 -luser32 -lgdi32 \
429 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
430 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
431 -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
433 .IF "$(CFG)" == "Debug"
434 OPTIMIZE = -g -O2 -DDEBUGGING
442 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
443 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
448 BUILDOPT += -fno-strict-aliasing -mms-bitfields
452 # All but the free version of VC++ 7.x can load DLLs on demand. Makes the test
453 # suite run in about 10% less time.
454 .IF "$(CCTYPE)" != "MSVC70FREE"
455 DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib
458 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
459 # DLLs. These either need copying everywhere with the binaries, or else need
460 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
461 # simplicity, embed them if they exist (and delete them afterwards so that they
462 # don't get installed too).
463 EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
464 if exist $@.manifest del $@.manifest
465 EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
466 if exist $@.manifest del $@.manifest
468 # Most relevant compiler-specific options fall into two groups:
469 # either pre-MSVC80 or MSVC80 onwards, so define a macro for this.
470 .IF "$(CCTYPE)" == "MSVC60" || \
471 "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC70FREE"
479 LIB32 = $(LINK32) -lib
486 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
487 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
488 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT
489 LOCDEFS = -DPERLDLL -DPERL_CORE
495 .IF "$(CFG)" == "Debug"
496 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
499 # -O1 yields smaller code, which turns out to be faster than -O2 on x86 and x64
500 OPTIMIZE = -O1 -MD -Zi -DNDEBUG
501 # we enable debug symbols in release builds also
502 LINK_DBG = -debug -opt:ref,icf
503 # you may want to enable this if you want COFF symbols in the executables
504 # in addition to the PDB symbols. The default Dr. Watson that ships with
505 # Windows can use the the former but not latter. The free WinDbg can be
506 # installed to get better stack traces from just the PDB symbols, so we
507 # avoid the bloat of COFF symbols by default.
508 #LINK_DBG = $(LINK_DBG) -debugtype:both
509 .IF "$(WIN64)" == "define"
510 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
516 .IF "$(WIN64)" == "define"
517 DEFINES += -DWIN64 -DCONSERVATIVE
518 OPTIMIZE += -fp:precise
521 # For now, silence warnings from VC++ 8.x onwards about "unsafe" CRT functions
522 # and POSIX CRT function names being deprecated.
523 .IF "$(PREMSVC80)" == "undef"
524 DEFINES += -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
527 # In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to
528 # 64-bit, even in 32-bit mode. It also provides the _USE_32BIT_TIME_T
529 # preprocessor option to revert back to the old functionality for
530 # backward compatibility. We define this symbol here for older 32-bit
531 # compilers only (which aren't using it at all) for the sole purpose
532 # of getting it into $Config{ccflags}. That way if someone builds
533 # Perl itself with e.g. VC6 but later installs an XS module using VC8
534 # the time_t types will still be compatible.
535 .IF "$(WIN64)" == "undef"
536 .IF "$(PREMSVC80)" == "define"
537 BUILDOPT += -D_USE_32BIT_TIME_T
542 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
543 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
544 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
545 version.lib odbc32.lib odbccp32.lib comctl32.lib
547 # The 64 bit Windows Server 2003 SP1 SDK compilers link against MSVCRT.dll, which
548 # doesn't include the buffer overrun verification code used by the /GS switch.
549 # Since the code links against libraries that are compiled with /GS, this
550 # "security cookie verification" code must be included via bufferoverflow.lib.
551 .IF "$(WIN64)" == "define" && "$(CCTYPE)" == "SDK2003SP1"
552 LIBBASEFILES += bufferoverflowU.lib
555 LIBFILES = $(LIBBASEFILES) $(LIBC)
557 EXTRACFLAGS = -nologo -GF -W3
558 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
559 $(PCHFLAGS) $(OPTIMIZE)
560 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
561 -libpath:"$(INST_COREDIR)" \
562 -machine:$(PROCESSOR_ARCHITECTURE)
570 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
572 .IF "$(PREMSVC80)" == "undef"
573 LINK_FLAGS += "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'"
575 RSC_FLAGS = -DINCLUDE_MANIFEST
579 # used to allow local linking flags that are not propogated into Config.pm,
583 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
585 #################### do not edit below this line #######################
586 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
588 # Some old dmakes (including Sarathy's one at
589 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip)
590 # don't support logical OR (||) or logical AND (&&) in conditional
591 # expressions and hence don't process this makefile correctly. Determine
592 # whether this is the case so that we can give the user an error message.
609 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
612 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
615 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
621 .IF "$(CCTYPE)" == "GCC"
622 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
623 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
625 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
626 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
631 .IF "$(CCTYPE)" == "GCC"
632 $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -D INCLUDE_MANIFEST -i $< -o $@
634 $(RSC) -i.. -DINCLUDE_MANIFEST $<
639 MINIPERL = ..\miniperl.exe
641 PERLEXE = ..\perl.exe
642 WPERLEXE = ..\wperl.exe
643 PERLEXESTATIC = ..\perl-static.exe
644 GLOBEXE = ..\perlglob.exe
645 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
646 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
648 GENUUDMAP = ..\generate_uudmap.exe
649 .IF "$(BUILD_STATIC)" == "define"
655 # Unicode data files generated by mktables
656 UNIDATAFILES = ..\lib\unicore\Decomposition.pl ..\lib\unicore\TestProp.pl \
657 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
658 ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm \
659 ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst
661 # Directories of Unicode data files generated by mktables
662 UNIDATADIR1 = ..\lib\unicore\To
663 UNIDATADIR2 = ..\lib\unicore\lib
665 PERLEXE_MANIFEST= .\perlexe.manifest
666 PERLEXE_ICO = .\perlexe.ico
667 PERLEXE_RES = .\perlexe.res
670 # Nominate a target which causes extensions to be re-built
671 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
672 # on and really only the interface - i.e. the .def file used to export symbols
674 PERLDEP = perldll.def
677 PL2BAT = bin\pl2bat.pl
692 ..\utils\config_data \
701 ..\utils\zipdetails \
702 ..\utils\cpanp-run-perl \
717 .IF "$(CCTYPE)" == "GCC"
719 CFGSH_TMPL = config.gc
720 CFGH_TMPL = config_H.gc
721 PERLIMPLIB = ..\libperl519$(a)
722 PERLSTATICLIB = ..\libperl519s$(a)
728 CFGSH_TMPL = config.vc
729 CFGH_TMPL = config_H.vc
735 # makedef.pl must be updated if this changes, and this should normally
736 # only change when there is an incompatible revision of the public API.
737 PERLIMPLIB *= ..\perl519$(a)
738 PERLSTATICLIB *= ..\perl519s$(a)
739 PERLDLL = ..\perl519.dll
741 XCOPY = xcopy /f /r /i /d /y
742 RCOPY = xcopy /f /r /i /e /d /y
783 EXTRACORE_SRC += perllib.c
785 .IF "$(PERL_MALLOC)" == "define"
786 EXTRACORE_SRC += ..\malloc.c
789 EXTRACORE_SRC += ..\perlio.c
797 # We need this for miniperl build unless we override canned
798 # config.h #define building mini\*
799 #.IF "$(USE_PERLIO)" == "define"
800 WIN32_SRC += .\win32io.c
847 .\include\sys\socket.h \
850 CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
852 UUDMAP_H = ..\uudmap.h
853 BITCOUNT_H = ..\bitcount.h
854 MG_DATA_H = ..\mg_data.h
855 GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H)
857 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
858 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
859 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
860 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
861 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
862 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
863 DLL_OBJ = $(DYNALOADER)
864 X2P_OBJ = $(X2P_SRC:db:+$(o))
865 GENUUDMAP_OBJ = $(GENUUDMAP:db:+$(o))
867 PERLDLL_OBJ = $(CORE_OBJ)
868 PERLEXE_OBJ = perlmain$(o)
869 PERLEXEST_OBJ = perlmainst$(o)
871 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
873 .IF "$(USE_SETARGV)" != ""
874 SETARGV_OBJ = setargv$(o)
877 .IF "$(ALL_STATIC)" == "define"
878 # some exclusions, unfortunately, until fixed:
879 # - Win32 extension contains overlapped symbols with win32.c (BUG!)
880 # - MakeMaker isn't capable enough for SDBM_File (smaller bug)
881 # - Encode (encoding search algorithm relies on shared library?)
882 STATIC_EXT = * !Win32 !SDBM_File !Encode
884 # specify static extensions here, for example:
885 #STATIC_EXT = Cwd Compress/Raw/Zlib
886 STATIC_EXT = Win32CORE
889 DYNALOADER = ..\DynaLoader$(o)
891 # vars must be separated by "\t+~\t+", since we're using the tempfile
892 # version of config_sh.pl (we were overflowing someone's buffer by
893 # trying to fit them all on the command line)
896 INST_TOP=$(INST_TOP) ~ \
897 INST_VER=$(INST_VER) ~ \
898 INST_ARCH=$(INST_ARCH) ~ \
899 archname=$(ARCHNAME) ~ \
902 ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
903 cf_email=$(EMAIL) ~ \
904 d_mymalloc=$(PERL_MALLOC) ~ \
905 libs=$(LIBFILES:f) ~ \
906 incpath=$(CCINCDIR) ~ \
907 libperl=$(PERLIMPLIB:f) ~ \
908 libpth=$(CCLIBDIR);$(EXTRALIBDIRS) ~ \
915 static_ext=$(STATIC_EXT) ~ \
916 usethreads=$(USE_ITHREADS) ~ \
917 useithreads=$(USE_ITHREADS) ~ \
918 usemultiplicity=$(USE_MULTI) ~ \
919 useperlio=$(USE_PERLIO) ~ \
920 use64bitint=$(USE_64_BIT_INT) ~ \
921 uselargefiles=$(USE_LARGE_FILES) ~ \
922 usesitecustomize=$(USE_SITECUST) ~ \
923 LINK_FLAGS=$(LINK_FLAGS) ~ \
924 optimize=$(OPTIMIZE) ~ \
925 ARCHPREFIX=$(ARCHPREFIX) ~ \
928 ICWD = -I..\dist\Cwd -I..\dist\Cwd\lib
934 all : CHECKDMAKE .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \
935 $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
936 $(PERLEXE) $(X2P) Extensions Extensions_nonxs $(PERLSTATIC)
938 regnodes : ..\regnodes.h
940 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
942 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
944 reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \
945 $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
946 $(X2P) Extensions_reonly
948 static: $(PERLEXESTATIC)
950 #----------------------------------------------------------------
953 .IF "$(NEWDMAKE)" == "define"
956 @echo Your dmake doesn't support ^|^| or ^&^& in conditional expressions.
957 @echo Please get the latest dmake from http://search.cpan.org/dist/dmake/
961 $(GLOBEXE) : perlglob$(o)
962 .IF "$(CCTYPE)" == "GCC"
963 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
965 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
966 perlglob$(o) setargv$(o)
970 perlglob$(o) : perlglob.c
972 config.w32 : $(CFGSH_TMPL)
973 copy $(CFGSH_TMPL) config.w32
976 # Copy the template config.h and set configurables at the end of it
977 # as per the options chosen and compiler used.
978 # Note: This config.h is only used to build miniperl.exe anyway, but
979 # it's as well to have its options correct to be sure that it builds
980 # and so that it's "-V" options are correct for use by makedef.pl. The
981 # real config.h used to build perl.exe is generated from the top-level
982 # config_h.SH by config_h.PL (run by miniperl.exe).
984 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
986 copy $(CFGH_TMPL) config.h
988 @echo #ifndef _config_h_footer_>>$@
989 @echo #define _config_h_footer_>>$@
990 @echo #undef PTRSIZE>>$@
991 @echo #undef SSize_t>>$@
992 @echo #undef HAS_ATOLL>>$@
993 @echo #undef HAS_STRTOLL>>$@
994 @echo #undef HAS_STRTOULL>>$@
995 @echo #undef IVTYPE>>$@
996 @echo #undef UVTYPE>>$@
997 @echo #undef IVSIZE>>$@
998 @echo #undef UVSIZE>>$@
999 @echo #undef NV_PRESERVES_UV>>$@
1000 @echo #undef NV_PRESERVES_UV_BITS>>$@
1001 @echo #undef IVdf>>$@
1002 @echo #undef UVuf>>$@
1003 @echo #undef UVof>>$@
1004 @echo #undef UVxf>>$@
1005 @echo #undef UVXf>>$@
1006 @echo #undef USE_64_BIT_INT>>$@
1007 @echo #undef Size_t_size>>$@
1008 .IF "$(WIN64)"=="define"
1009 @echo #define PTRSIZE ^8>>$@
1010 @echo #define SSize_t $(INT64)>>$@
1011 @echo #define HAS_ATOLL>>$@
1012 @echo #define HAS_STRTOLL>>$@
1013 @echo #define HAS_STRTOULL>>$@
1014 @echo #define Size_t_size ^8>>$@
1016 @echo #define PTRSIZE ^4>>$@
1017 @echo #define SSize_t int>>$@
1018 @echo #undef HAS_ATOLL>>$@
1019 @echo #undef HAS_STRTOLL>>$@
1020 @echo #undef HAS_STRTOULL>>$@
1021 @echo #define Size_t_size ^4>>$@
1023 .IF "$(USE_64_BIT_INT)"=="define"
1024 @echo #define IVTYPE $(INT64)>>$@
1025 @echo #define UVTYPE unsigned $(INT64)>>$@
1026 @echo #define IVSIZE ^8>>$@
1027 @echo #define UVSIZE ^8>>$@
1028 @echo #undef NV_PRESERVES_UV>>$@
1029 @echo #define NV_PRESERVES_UV_BITS 53>>$@
1030 @echo #define IVdf "$(INT64f)d">>$@
1031 @echo #define UVuf "$(INT64f)u">>$@
1032 @echo #define UVof "$(INT64f)o">>$@
1033 @echo #define UVxf "$(INT64f)x">>$@
1034 @echo #define UVXf "$(INT64f)X">>$@
1035 @echo #define USE_64_BIT_INT>>$@
1037 @echo #define IVTYPE long>>$@
1038 @echo #define UVTYPE unsigned long>>$@
1039 @echo #define IVSIZE ^4>>$@
1040 @echo #define UVSIZE ^4>>$@
1041 @echo #define NV_PRESERVES_UV>>$@
1042 @echo #define NV_PRESERVES_UV_BITS 32>>$@
1043 @echo #define IVdf "ld">>$@
1044 @echo #define UVuf "lu">>$@
1045 @echo #define UVof "lo">>$@
1046 @echo #define UVxf "lx">>$@
1047 @echo #define UVXf "lX">>$@
1048 @echo #undef USE_64_BIT_INT>>$@
1052 ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
1053 cd .. && miniperl -Ilib make_patchnum.pl
1055 # make sure that we recompile perl.c if the git version changes
1056 ..\perl$(o) : ..\git_version.h
1058 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1059 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1060 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1062 # This target is for when changes to the main config.sh happen.
1063 # Edit config.gc, then make perl using GCC in a minimal configuration (i.e.
1064 # with MULTI, ITHREADS, IMP_SYS, LARGE_FILES and PERLIO off), then make
1065 # this target to regenerate config_H.gc.
1067 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1068 $(CFGSH_TMPL) > ..\config.sh
1069 $(MINIPERL) -I..\lib ..\configpm --chdir=..
1070 -del /f $(CFGH_TMPL)
1071 -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "ARCHPREFIX=$(ARCHPREFIX)"
1072 rename config.h $(CFGH_TMPL)
1074 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
1075 $(MINIPERL) -I..\lib ..\configpm --chdir=..
1076 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1077 $(XCOPY) ..\*.h $(COREDIR)\*.*
1078 $(XCOPY) *.h $(COREDIR)\*.*
1079 $(RCOPY) include $(COREDIR)\*.*
1080 $(MINIPERL) -I..\lib $(ICWD) config_h.PL "ARCHPREFIX=$(ARCHPREFIX)" \
1081 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1083 ..\lib\buildcustomize.pl: $(MINIPERL) ..\write_buildcustomize.pl
1084 $(MINIPERL) -I..\lib ..\write_buildcustomize.pl .. >..\lib\buildcustomize.pl
1087 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
1088 .IF "$(CCTYPE)" == "GCC"
1089 $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
1090 $(mktmp $(LKPRE) $(MINI_OBJ) $(LIBFILES) $(LKPOST))
1092 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1093 @$(mktmp $(DELAYLOAD) $(LIBFILES) $(MINI_OBJ))
1098 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1100 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1101 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*B).c
1103 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1104 $(CC) -c $(CFLAGS) -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(*B).c
1106 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1107 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1108 # unless the .IF is true), so instead we use a .ELSE with the default.
1109 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1111 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1112 .IF "$(USE_IMP_SYS)" == "define"
1113 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1115 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1118 # 1. we don't want to rebuild miniperl.exe when config.h changes
1119 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1120 # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
1121 $(MINI_OBJ) : $(CORE_NOCFG_H)
1123 $(WIN32_OBJ) : $(CORE_H)
1125 $(CORE_OBJ) : $(CORE_H)
1127 $(DLL_OBJ) : $(CORE_H)
1129 $(X2P_OBJ) : $(CORE_H)
1131 perldll.def : $(MINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibst_h.pl
1132 $(MINIPERL) -I..\lib create_perllibst_h.pl
1133 $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1134 $(BUILDOPT) CCTYPE=$(CCTYPE) TARG_DIR=..\ > perldll.def
1136 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1137 .IF "$(CCTYPE)" == "GCC"
1138 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1139 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1140 $(shell @type Extensions_static) \
1141 $(LIBFILES) $(LKPOST))
1142 $(IMPLIB) --output-lib $(PERLIMPLIB) \
1143 --dllname $(PERLDLL:b).dll \
1145 --base-file perl.base \
1146 --output-exp perl.exp
1147 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1148 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1149 $(shell @type Extensions_static) \
1150 $(LIBFILES) perl.exp $(LKPOST))
1152 $(LINK32) -dll -def:perldll.def -out:$@ $(BLINK_FLAGS) \
1153 @Extensions_static \
1154 @$(mktmp -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \
1155 $(PERLDLL_RES) $(PERLDLL_OBJ))
1158 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1160 $(PERLSTATICLIB): Extensions_static
1161 .IF "$(CCTYPE)" == "GCC"
1162 # XXX: It would be nice if MinGW's ar accepted a temporary file, but this
1163 # doesn't seem to work:
1164 # $(LIB32) $(LIB_FLAGS) $@ \
1165 # $(mktmp $(LKPRE) $(shell @type Extensions_static) \
1166 # $(PERLDLL_OBJ) $(LKPOST))
1167 $(LIB32) $(LIB_FLAGS) $@ \
1168 $(shell @type Extensions_static) \
1171 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \
1172 @$(mktmp $(PERLDLL_OBJ))
1174 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
1176 $(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
1178 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1179 cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1181 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1182 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1184 ..\x2p\hash$(o) : ..\x2p\hash.c
1185 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1187 ..\x2p\str$(o) : ..\x2p\str.c
1188 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1190 ..\x2p\util$(o) : ..\x2p\util.c
1191 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1193 ..\x2p\walk$(o) : ..\x2p\walk.c
1194 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1196 $(X2P) : $(MINIPERL) $(X2P_OBJ) Extensions
1197 $(MINIPERL) -I..\lib ..\x2p\find2perl.PL
1198 $(MINIPERL) -I..\lib ..\x2p\s2p.PL
1199 .IF "$(CCTYPE)" == "GCC"
1200 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1201 $(mktmp $(LKPRE) $(X2P_OBJ) $(LIBFILES) $(LKPOST))
1203 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1204 @$(mktmp $(LIBFILES) $(X2P_OBJ))
1208 $(MINIDIR)\globals$(o) : $(GENERATED_HEADERS)
1210 $(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H)
1212 $(BITCOUNT_H) : $(GENUUDMAP)
1213 $(GENUUDMAP) $(GENERATED_HEADERS)
1215 $(GENUUDMAP_OBJ) : ..\mg_raw.h
1217 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
1218 .IF "$(CCTYPE)" == "GCC"
1219 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1220 $(mktmp $(LKPRE) $(GENUUDMAP_OBJ) $(LIBFILES) $(LKPOST))
1222 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1223 @$(mktmp $(LIBFILES) $(GENUUDMAP_OBJ))
1227 perlmain.c : runperl.c
1228 copy runperl.c perlmain.c
1230 perlmain$(o) : perlmain.c
1231 $(CC) $(CFLAGS_O:s,-DPERLDLL,-UPERLDLL,) $(OBJOUT_FLAG)$@ -c perlmain.c
1233 perlmainst.c : runperl.c
1234 copy runperl.c perlmainst.c
1236 perlmainst$(o) : perlmainst.c
1237 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1239 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1240 .IF "$(CCTYPE)" == "GCC"
1241 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1242 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
1244 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1245 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1248 copy $(PERLEXE) $(WPERLEXE)
1249 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1251 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1252 .IF "$(CCTYPE)" == "GCC"
1253 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1254 $(mktmp $(LKPRE) $(shell @type Extensions_static) \
1255 $(PERLSTATICLIB) $(LIBFILES) $(PERLEXEST_OBJ) \
1256 $(PERLEXE_RES) $(LKPOST))
1258 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1259 @Extensions_static $(PERLSTATICLIB) /PDB:NONE \
1260 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1264 MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
1265 $(MINIPERL) -I..\lib $(ICWD) ..\mkppport
1267 #-------------------------------------------------------------------------------
1268 # There's no direct way to mark a dependency on
1269 # DynaLoader.pm, so this will have to do
1270 Extensions : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1271 $(XCOPY) ..\*.h $(COREDIR)\*.*
1272 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
1274 Extensions_reonly : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1275 $(XCOPY) ..\*.h $(COREDIR)\*.*
1276 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
1278 Extensions_static : ..\make_ext.pl ..\lib\buildcustomize.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
1279 $(XCOPY) ..\*.h $(COREDIR)\*.*
1280 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
1281 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1283 Extensions_nonxs : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) ..\pod\perlfunc.pod
1284 $(XCOPY) ..\*.h $(COREDIR)\*.*
1285 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
1287 $(DYNALOADER) : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
1288 $(XCOPY) ..\*.h $(COREDIR)\*.*
1289 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
1292 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
1294 Extensions_realclean :
1295 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
1297 #-------------------------------------------------------------------------------
1300 doc: $(PERLEXE) ..\pod\perltoc.pod
1301 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1302 --podpath=pod:lib:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1305 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1306 # so please check that script before making structural changes here
1307 utils: $(PERLEXE) $(X2P)
1308 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1309 copy ..\README.aix ..\pod\perlaix.pod
1310 copy ..\README.amiga ..\pod\perlamiga.pod
1311 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1312 copy ..\README.ce ..\pod\perlce.pod
1313 copy ..\README.cn ..\pod\perlcn.pod
1314 copy ..\README.cygwin ..\pod\perlcygwin.pod
1315 copy ..\README.dgux ..\pod\perldgux.pod
1316 copy ..\README.dos ..\pod\perldos.pod
1317 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1318 copy ..\README.haiku ..\pod\perlhaiku.pod
1319 copy ..\README.hpux ..\pod\perlhpux.pod
1320 copy ..\README.hurd ..\pod\perlhurd.pod
1321 copy ..\README.irix ..\pod\perlirix.pod
1322 copy ..\README.jp ..\pod\perljp.pod
1323 copy ..\README.ko ..\pod\perlko.pod
1324 copy ..\README.linux ..\pod\perllinux.pod
1325 copy ..\README.macos ..\pod\perlmacos.pod
1326 copy ..\README.macosx ..\pod\perlmacosx.pod
1327 copy ..\README.netware ..\pod\perlnetware.pod
1328 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1329 copy ..\README.os2 ..\pod\perlos2.pod
1330 copy ..\README.os390 ..\pod\perlos390.pod
1331 copy ..\README.os400 ..\pod\perlos400.pod
1332 copy ..\README.plan9 ..\pod\perlplan9.pod
1333 copy ..\README.qnx ..\pod\perlqnx.pod
1334 copy ..\README.riscos ..\pod\perlriscos.pod
1335 copy ..\README.solaris ..\pod\perlsolaris.pod
1336 copy ..\README.symbian ..\pod\perlsymbian.pod
1337 copy ..\README.tru64 ..\pod\perltru64.pod
1338 copy ..\README.tw ..\pod\perltw.pod
1339 copy ..\README.vos ..\pod\perlvos.pod
1340 copy ..\README.win32 ..\pod\perlwin32.pod
1341 copy ..\pod\perldelta.pod ..\pod\perl5180delta.pod
1342 $(PERLEXE) $(PL2BAT) $(UTILS)
1343 $(PERLEXE) $(ICWD) ..\autodoc.pl ..
1344 $(PERLEXE) $(ICWD) ..\pod\perlmodlib.pl -q
1346 ..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
1347 $(PERLEXE) -f ..\pod\buildtoc -q
1349 # Note that the pod cleanup in this next section is parsed (and regenerated
1350 # by pod/buildtoc so please check that script before making changes here
1352 distclean: realclean
1353 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1354 $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) \
1355 $(PERLEXESTATIC) $(PERLSTATICLIB)
1357 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1358 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1359 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1360 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1361 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1362 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1363 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1364 -del /f $(LIBDIR)\File\Glob.pm
1365 -del /f $(LIBDIR)\Storable.pm
1366 -del /f $(LIBDIR)\Sys\Hostname.pm
1367 -del /f $(LIBDIR)\Time\HiRes.pm
1368 -del /f $(LIBDIR)\Unicode\Normalize.pm
1369 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1370 -del /f $(LIBDIR)\Win32.pm
1371 -del /f $(LIBDIR)\Win32CORE.pm
1372 -del /f $(LIBDIR)\Win32API\File.pm
1373 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1374 -del /f $(LIBDIR)\buildcustomize.pl
1375 -del /f $(DISTDIR)\XSLoader\XSLoader.pm
1376 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1377 -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
1378 -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
1379 -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie
1380 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1381 -if exist $(LIBDIR)\CGI rmdir /s /q $(LIBDIR)\CGI
1382 -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN
1383 -if exist $(LIBDIR)\CPANPLUS rmdir /s /q $(LIBDIR)\CPANPLUS
1384 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1385 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1386 -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel
1387 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1388 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1389 -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding
1390 -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder
1391 -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command
1392 -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant
1393 -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist
1394 -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker
1395 -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec
1396 -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter
1397 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1398 -if exist $(LIBDIR)\I18N\LangTags rmdir /s /q $(LIBDIR)\I18N\LangTags
1399 -if exist $(LIBDIR)\inc rmdir /s /q $(LIBDIR)\inc
1400 -if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable
1401 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1402 -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC
1403 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1404 -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale
1405 -if exist $(LIBDIR)\Log rmdir /s /q $(LIBDIR)\Log
1406 -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math
1407 -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize
1408 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1409 -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
1410 -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro
1411 -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
1412 -if exist $(LIBDIR)\Object rmdir /s /q $(LIBDIR)\Object
1413 -if exist $(LIBDIR)\Package rmdir /s /q $(LIBDIR)\Package
1414 -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
1415 -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
1416 -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO
1417 -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc
1418 -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple
1419 -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text
1420 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1421 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1422 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1423 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1424 -if exist $(LIBDIR)\Term\UI rmdir /s /q $(LIBDIR)\Term\UI
1425 -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
1426 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
1427 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1428 -if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash
1429 -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
1430 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1431 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1432 -cd $(PODDIR) && del /f *.html *.bat roffitall \
1433 perl5180delta.pod perlaix.pod perlamiga.pod perlapi.pod \
1434 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1435 perldgux.pod perldos.pod perlfreebsd.pod perlhaiku.pod \
1436 perlhpux.pod perlhurd.pod perlintern.pod perlirix.pod \
1437 perljp.pod perlko.pod perllinux.pod perlmacos.pod \
1438 perlmacosx.pod perlmodlib.pod perlnetware.pod perlopenbsd.pod \
1439 perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
1440 perlqnx.pod perlriscos.pod perlsolaris.pod perlsymbian.pod \
1441 perltoc.pod perltru64.pod perltw.pod perluniprops.pod \
1442 perlvos.pod perlwin32.pod
1443 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1444 perldoc perlivp libnetcfg enc2xs piconv cpan *.bat \
1445 xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep cpanp-run-perl cpanp cpan2dist shasum corelist config_data zipdetails
1446 -cd ..\x2p && del /f find2perl s2p psed *.bat
1447 -del /f ..\config.sh perlmain.c dlutils.c config.h.new \
1450 -del /f ..\lib\Config_git.pl
1453 -del /f $(PERLEXE_RES) perl.base
1454 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib ppport.h
1455 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1456 -cd $(DISTDIR) && del /s *.def Makefile Makefile.old
1457 -cd $(CPANDIR) && del /s *.def Makefile Makefile.old
1458 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1459 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1460 -if exist pod2htmd.tmp del pod2htmd.tmp
1461 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1462 -del /f ..\t\test_state
1464 install : all installbare installhtml
1466 installbare : utils ..\pod\perltoc.pod
1467 $(PERLEXE) ..\installperl
1468 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1469 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1470 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1471 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1472 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1473 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1476 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1478 inst_lib : $(CONFIGPM)
1479 $(RCOPY) ..\lib $(INST_LIB)\*.*
1481 $(UNIDATAFILES) ..\pod\perluniprops.pod .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
1482 cd ..\lib\unicore && \
1483 ..\$(MINIPERL) -I.. -I..\..\dist\Cwd\lib -I..\..\dist\Cwd mktables -P ..\..\pod -maketest -makelist -p
1485 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1486 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1487 if exist ..\t\perl.exe del /f ..\t\perl.exe
1488 rename ..\t\miniperl.exe perl.exe
1489 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1492 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t opbasic/*.t op/*.t pragma/*.t
1494 test-prep : all utils ..\pod\perltoc.pod
1495 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1496 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1497 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1498 .IF "$(CCTYPE)" == "GCC"
1499 # If building with gcc versions 4.x.x or greater, then
1500 # the GCC helper DLL will also need copied to the test directory.
1501 # The name of the dll can change, depending upon which vendor has supplied
1502 # your compiler, and upon the values of "x".
1503 # libstdc++-6.dll is copied if it exists as it, too, may then be needed.
1504 # Without this copying, the op/taint.t test script will fail.
1505 if exist $(CCDLLDIR)\libgcc_s_sjlj-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_sjlj-1.dll ..\t\$(NULL)
1506 if exist $(CCDLLDIR)\libgcc_s_dw2-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_dw2-1.dll ..\t\$(NULL)
1507 if exist $(CCDLLDIR)\libstdc++-6.dll $(XCOPY) $(CCDLLDIR)\libstdc++-6.dll ..\t\$(NULL)
1511 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1512 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1514 test_porting : test-prep
1515 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1516 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t
1518 test-reonly : reonly utils
1519 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1520 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1521 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1523 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\\/ $(EXTRA) && \
1527 cd .. && regen.pl && cd win32
1529 test-notty : test-prep
1530 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1531 set PERL_SKIP_TTY_TEST=1 && \
1532 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1535 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1536 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1537 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1538 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1539 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1542 -@erase miniperlmain$(o)
1544 -@erase perlglob$(o)
1545 -@erase perlmain$(o)
1546 -@erase perlmainst$(o)
1549 -@erase /f ..\git_version.h
1553 -@erase $(PERLEXESTATIC)
1554 -@erase $(PERLSTATICLIB)
1557 -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(GENERATED_HEADERS)
1558 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1559 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1560 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1561 -@erase $(UNIDATAFILES)
1562 -@erase $(WIN32_OBJ)
1565 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1566 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1567 -@erase ..\x2p\*.exe ..\x2p\*.bat
1571 -@erase Extensions_static
1575 clean : Extensions_clean _clean
1577 realclean : Extensions_realclean _clean
1579 # Handy way to run perlbug -ok without having to install and run the
1580 # installed perlbug. We don't re-run the tests here - we trust the user.
1581 # Please *don't* use this unless all tests pass.
1582 # If you want to report test failures, use "dmake nok" instead.
1584 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1587 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1590 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1593 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok