1 case $PERL_CONFIG_SH in
6 echo "Can't find config.sh."; exit 1
17 # if cross-compilation, the Makefile named accordingly
18 Makefile=Makefile-cross-$CROSS_NAME
19 . Cross/config-${CROSS_NAME}.sh
23 : This forces SH files to create target in same directory as SH file.
24 : This is so that make depend always knows where to find SH derivatives.
26 */*) cd `expr X$0 : 'X\(.*\)/'` ;;
29 linklibperl='$(LIBPERL)'
31 shrpldflags='$(LDDLFLAGS)'
33 DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB'
34 DPERL_IS_MINIPERL='-DPERL_IS_MINIPERL'
37 # Prefix all runs of 'miniperl' and 'perl' with
38 # $ldlibpth so that ./perl finds *this* shared libperl.
39 case "$LD_LIBRARY_PATH" in
41 ldlibpth="LD_LIBRARY_PATH=`pwd`";;
43 ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";;
46 pldlflags="$cccdlflags"
48 case "${osname}${osvers}" in
51 lddlflags="-dynamic -undefined warning -framework System \
52 -compatibility_version 1 -current_version $patchlevel \
53 -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
56 shrpldflags="${ldflags} -dynamiclib \
57 -compatibility_version \
58 ${api_revision}.${api_version}.${api_subversion} \
60 ${revision}.${patchlevel}.${subversion} \
61 -install_name \$(shrpdir)/\$@"
64 shrpldflags="$shrpldflags -Wl,--out-implib=libperl.dll.a -Wl,--image-base,0x52000000"
65 linklibperl="-L. -lperl"
70 netbsd*|freebsd[234]*|openbsd*|dragonfly*)
71 linklibperl="-L. -lperl"
74 linklibperl="-L. -lperl"
75 shrpldflags="$shrpldflags -Wl,--image-base,0x57000000"
80 shrpldflags="-shared -Wl,-H512 -Wl,-T512 -Wl,-bhalt:4 -Wl,-bM:SRE -Wl,-bE:perl.exp"
82 3*) shrpldflags="$shrpldflags -e _nostart"
84 *) shrpldflags="$shrpldflags -Wl,-bnoentry"
87 shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
88 linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl"
89 linklibperl_nonshr='-lperl_nonshr'
92 shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
94 3*) shrpldflags="$shrpldflags -e _nostart"
96 *) shrpldflags="$shrpldflags -b noentry"
99 shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
100 linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl"
101 linklibperl_nonshr='-lperl_nonshr'
106 linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl"
109 shrpldflags='-W l,XPLINK,dll'
110 linklibperl='libperl.x'
111 DPERL_EXTERNAL_GLOB=''
114 case "$ldlibpthname" in
122 eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\""
125 # Strip off any trailing :'s
126 ldlibpth=`echo $ldlibpth | sed 's/:*$//'`
132 *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;;
137 # If there is a pre-existing $libperl from a previous
138 # installation, Linux needs to use LD_PRELOAD to
139 # override the LD_LIBRARY_PATH setting. See the
140 # INSTALL file, under "Building a shared perl library".
141 # If there is no pre-existing $libperl, we don't need
142 # to do anything further.
143 if test -f $archlib/CORE/$libperl; then
145 cat <<'EOT' > preload
149 test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD"
153 ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl"
156 os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth"
163 static_ldflags='CCCDLFLAGS='
167 : is Cwd static or dynamic
169 list_util_dep='$(PERL_EXE)'
170 for f in $dynamic_ext; do
172 Cwd) static_cwd='undef' ;;
173 List/Util) list_util_dep=lib/auto/List/Util/Util.$dlext
177 : Prepare dependency lists for Makefile.
179 dynamic_ext_re="lib/auto/re/re.$dlext"
181 for f in $dynamic_ext; do
182 : the dependency named here will never exist
183 base=`echo "$f" | sed 's/.*\///'`
184 this_target="lib/auto/$f/$base.$dlext"
185 dynamic_list="$dynamic_list $this_target"
187 : Parallel makes reveal that we have some interdependencies
189 Math/BigInt/FastCalc|Devel/NYTProf) extra_dep="$extra_dep
190 $this_target: $list_util_dep" ;;
191 Unicode/Normalize) extra_dep="$extra_dep
192 $this_target: uni.data" ;;
197 for f in $static_ext; do
198 base=`echo "$f" | sed 's/.*\///'`
199 static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
200 : Parallel makes reveal that we have some interdependencies
201 this_target="lib/auto/$f/$base\$(LIB_EXT)"
203 Math/BigInt/FastCalc|Devel/NYTProf) extra_dep="$extra_dep
204 $this_target: lib/auto/List/Util/Util\$(LIB_EXT)" ;;
205 Unicode/Normalize) extra_dep="$extra_dep
206 $this_target: uni.data" ;;
211 for f in $nonxs_ext; do
212 p=`echo "$f" | tr / -`
213 for d in ext dist cpan; do
214 if test -d $d/$p; then
215 nonxs_list="$nonxs_list $d/$p/pm_to_blib"
225 dtrace_h='perldtrace.h'
226 $dtrace -G -s perldtrace.d -o perldtrace.tmp >/dev/null 2>&1 \
227 && rm -f perldtrace.tmp && dtrace_o='perldtrace$(OBJ_EXT)' \
228 && minidtrace_o='miniperldtrace$(OBJ_EXT)'
232 echo "Extracting $Makefile (with variable substitutions)"
233 $spitshell >$Makefile <<!GROK!THIS!
235 # This file is derived from Makefile.SH. Any changes made here will
236 # be lost the next time you run Configure.
237 # Makefile is used to generate $firstmakefile. The only difference
238 # is that $firstmakefile has the dependencies filled in at the end.
246 mallocsrc = $mallocsrc
247 mallocobj = $mallocobj
251 # NOTE: some systems don't grok "cp -f". XXX Configure test needed?
256 # The following are mentioned only to make metaconfig include the
257 # appropriate questions in Configure. If you want to change these,
258 # edit config.sh instead, or specify --man1dir=/wherever on
259 # installman commandline.
261 scriptdir = $scriptdir
262 shrpdir = $archlibexp/CORE
263 privlib = $installprivlib
269 # The following are used to build and install shared libraries for
271 LDDLFLAGS = $lddlflags
272 SHRPLDFLAGS = $shrpldflags
273 CCDLFLAGS = $ccdlflags
275 PLDLFLAGS = $pldlflags
277 LLIBPERL= $linklibperl
278 LLIBPERL_NONSHR= $linklibperl_nonshr
281 # Static targets are ordinarily built without CCCDLFLAGS. However,
282 # if building a shared libperl.so that might later be linked into
283 # another application, then it might be appropriate to also build static
284 # extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC
286 STATIC_LDFLAGS = $static_ldflags
288 # The following is used to include the current directory in
289 # the dynamic loader path you are building a shared libperl.
292 # Sometimes running an executable is an adventure.
295 # These variables may need to be manually set for non-Unix systems.
303 # Macros to invoke a copy of miniperl during the build. Targets which
304 # are built using these macros should depend on \$(MINIPERL_EXE)
305 MINIPERL_EXE = miniperl\$(EXE_EXT)
306 MINIPERL = \$(LDLIBPTH) \$(RUN) ./miniperl\$(EXE_EXT) -Ilib
308 # Macros to invoke a copy of our fully operational perl during the build.
309 PERL_EXE = perl\$(EXE_EXT)
310 RUN_PERL = \$(LDLIBPTH) \$(RUN) ./perl\$(EXE_EXT)
312 # Macros to run our tests
313 RUN_TESTS = \$(LDLIBPTH) ./runtests
315 dynamic_ext = $dynamic_list
316 dynamic_ext_re = $dynamic_ext_re
317 static_ext = $static_list
318 nonxs_ext = $nonxs_list
319 ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext)
320 DYNALOADER = DynaLoader\$(OBJ_EXT)
322 libs = $perllibs $cryptlib
324 public = \$(PERL_EXE) utilities translators
326 shellflags = $shellflags
328 # This is set to MAKE=$make if your $make command doesn't
332 # Mention $gmake here so it gets probed for by Configure.
334 # If you're going to use valgrind and it can't be invoked as plain valgrind
335 # then you'll need to change this, or override it on the make command line.
341 MINIDTRACE_O = $minidtrace_o
343 FIRSTMAKEFILE = $firstmakefile
345 # Any special object files needed by this architecture, e.g. os2/os2.obj
348 .SUFFIXES: .c \$(OBJ_EXT) .i .s
353 # how to tr(anslate) newlines
360 INSTALLPREFIXEXP = $prefix
363 # not used by Makefile but by installperl;
364 # mentioned here so that metaconfig picks these up
368 case "${osname}:${osvers}" in
370 $spitshell >>$Makefile <<EOF
372 # Your locales are broken (osname $osname, osvers $osvers)
373 # and to avoid the numerous
374 # perl: warning: Setting locale failed.
375 # warnings during the build process we reset the locale variables.
386 ## In the following dollars and backticks do not need the extra backslash.
387 $spitshell >>$Makefile <<'!NO!SUBS!'
389 CCCMD = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $@`
391 CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<`
393 CONFIGPM_FROM_CONFIG_SH = lib/Config.pm lib/Config_heavy.pl
394 CONFIGPM = $(CONFIGPM_FROM_CONFIG_SH) lib/Config_git.pl
396 CONFIGPOD = lib/Config.pod
402 # if cross-compilation
403 $spitshell >>$Makefile <<!GROK!THIS!
404 CROSS_NAME = $CROSS_NAME
405 CROSS_LIB = xlib/$CROSS_NAME
407 CCCMD = \`sh \$(shellflags) cflags-cross-$CROSS_NAME "optimize='\$(OPTIMIZE)'" \$@\` -I\$(CROSS_LIB)
408 CCCMDSRC = \`sh \$(shellflags) cflags-cross-$CROSS_NAME "optimize='\$(OPTIMIZE)'" \$<\` -I\$(CROSS_LIB)
409 CONFIGPM = xlib/\$(CROSS_NAME)/Config.pm
410 CONFIGPOD = xlib/\$(CROSS_NAME)/Config.pod
413 xconfig.h: config_h.SH Cross/config-\$(CROSS_NAME).sh
414 CONFIG_SH=Cross/config-\$(CROSS_NAME).sh CONFIG_H=xconfig.h \$(SHELL) config_h.SH
415 #TODO \$(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib -MCross=\$(CROSS_NAME) config_h.PL "INST_VER=\$(INST_VER)" "CORE_DIR=\$(CROSS_LIB)" "CONFIG_H=xconfig.h"
416 cp xconfig.h \$(CROSS_LIB)/
417 cp xconfig.h \$(CROSS_LIB)/config.h
423 ## In the following dollars and backticks do not need the extra backslash.
424 $spitshell >>$Makefile <<'!NO!SUBS!'
426 private = preplibrary $(CONFIGPM) $(CONFIGPOD) lib/ExtUtils/Miniperl.pm git_version.h lib/buildcustomize.pl
428 # Files to be built with variable substitution before miniperl
430 sh = Makefile.SH cflags.SH config_h.SH makedepend.SH myconfig.SH pod/Makefile.SH
432 shextract = Makefile cflags config.h makedepend makedir myconfig pod/Makefile
434 addedbyconf = UU $(shextract) pstruct
436 # Unicode data files generated by mktables
437 unidatafiles = lib/unicore/Decomposition.pl lib/unicore/TestProp.pl \
438 lib/unicore/CombiningClass.pl lib/unicore/Name.pl \
439 lib/unicore/Heavy.pl lib/unicore/mktables.lst
441 # Directories of Unicode data files generated by mktables
442 unidatadirs = lib/unicore/To lib/unicore/lib
444 h1 = EXTERN.h INTERN.h XSUB.h av.h $(CONFIGH) cop.h cv.h dosish.h
445 h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h
446 h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
447 h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
448 h5 = utf8.h warnings.h mydtrace.h op_reg_common.h l1_char_class_tab.h
449 h = $(h1) $(h2) $(h3) $(h4) $(h5)
451 c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c
452 c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
453 c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c
454 c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c
455 c5 = $(madlysrc) $(mallocsrc)
457 c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c opmini.c perlmini.c
459 obj0 = op$(OBJ_EXT) perl$(OBJ_EXT)
460 obj0mini = perlmini$(OBJ_EXT) opmini$(OBJ_EXT) miniperlmain$(OBJ_EXT)
461 obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT) keywords$(OBJ_EXT)
462 obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
463 obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
465 minindt_obj = $(obj0mini) $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
466 mini_obj = $(minindt_obj) $(MINIDTRACE_O)
467 ndt_obj = $(obj0) $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
468 obj = $(ndt_obj) $(DTRACE_O)
470 perltoc_pod_prereqs = extra.pods pod/perl5153delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
471 generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs)
472 generated_headers = uudmap.h bitcount.h mg_data.h
474 Icwd = -Idist/Cwd -Idist/Cwd/lib
482 -errchk=parentheses \
486 -erroff=E_ASSIGN_NARROW_CONV \
487 -erroff=E_BAD_PTR_CAST \
488 -erroff=E_BAD_PTR_CAST_ALIGN \
489 -erroff=E_BAD_PTR_INT_COMBINATION \
490 -erroff=E_BAD_SIGN_EXTEND \
491 -erroff=E_BLOCK_DECL_UNUSED \
492 -erroff=E_CASE_FALLTHRU \
493 -erroff=E_CONST_EXPR \
494 -erroff=E_CONSTANT_CONDITION \
495 -erroff=E_END_OF_LOOP_CODE_NOT_REACHED \
496 -erroff=E_EQUALITY_NOT_ASSIGNMENT \
497 -erroff=E_EXPR_NULL_EFFECT \
498 -erroff=E_FALSE_LOGICAL_EXPR \
499 -erroff=E_INCL_NUSD \
500 -erroff=E_LOOP_EMPTY \
501 -erroff=E_MAIN_PARAM \
502 -erroff=E_POINTER_TO_OBJECT \
503 -erroff=E_PTRDIFF_OVERFLOW \
504 -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \
505 -erroff=E_STATIC_UNUSED \
506 -erroff=E_TRUE_LOGICAL_EXPR
509 -I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \
510 -D__builtin_va_list=va_list \
511 -Dsigjmp_buf=jmp_buf \
535 $(CCCMD) $(PLDLFLAGS) $*.c
538 $(CCCMDSRC) -E $*.c > $*.i
543 all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
545 @echo " Everything is up to date. Type '$(MAKE) test' to run test suite."
547 .PHONY: all translators utilities
549 # Both git_version.h and lib/Config_git.pl are built
550 # by make_patchnum.pl.
551 git_version.h: lib/Config_git.pl
553 lib/Config_git.pl: $(MINIPERL_EXE) make_patchnum.pl
554 $(MINIPERL) make_patchnum.pl
556 # make sure that we recompile perl.c if the git version changes
557 perl$(OBJ_EXT): git_version.h
561 # Making utilities and translators require Cwd. If we have dynamic
562 # loading, we only need miniperl and Cwd.$dlext. If we have static
563 # loading, we need to build perl first.
564 case "$usedl$static_cwd" in
566 util_deps='$(MINIPERL_EXE) $(CONFIGPM) lib/auto/Cwd/Cwd$(DLSUFFIX) FORCE'
567 x2p_deps='$(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) FORCE'
570 util_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
571 x2p_deps='$(PERL_EXE) $(CONFIGPM) $(dynamic_ext) FORCE'
573 *) util_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
574 x2p_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
578 $spitshell >>$Makefile <<!GROK!THIS!
579 translators: $x2p_deps
580 @echo " "; echo " Making x2p stuff"; cd x2p; \$(LDLIBPTH) \$(MAKE) all
583 cd x2p; \$(LDLIBPTH) \$(MAKE) s2p
585 x2p/find2perl: $x2p_deps
586 cd x2p; \$(LDLIBPTH) \$(MAKE) find2perl
588 utilities: $util_deps
589 @echo " "; echo " Making utilities"; cd utils; \$(LDLIBPTH) \$(MAKE) all
593 $spitshell >>$Makefile <<'!NO!SUBS!'
595 # This is now done by installman only if you actually want the man pages.
596 # @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
598 # Phony target to force checking subdirectories.
599 # Apparently some makes require an action for the FORCE target.
605 for file in op perl; do
606 if $issymlink $file.c; then
607 $spitshell >>$Makefile <<!GROK!THIS!
609 # We do a copy of the $file.c instead of a symlink because gcc gets huffy
610 # if we have a symlink forest to another disk (it complains about too many
611 # levels of symbolic links, even if we have only two)
613 ${file}mini.c: $file.c
614 \$(RMS) ${file}mini.c
615 \$(CPS) ${file}.c ${file}mini.c
618 $spitshell >>$Makefile <<!GROK!THIS!
620 ${file}mini.c: $file.c
621 \$(RMS) ${file}mini.c
622 \$(LNS) ${file}.c ${file}mini.c
626 $spitshell >>$Makefile <<!GROK!THIS!
628 ${file}mini\$(OBJ_EXT): ${file}mini.c
629 \$(CCCMD) \$(PLDLFLAGS) $DPERL_IS_MINIPERL $DPERL_EXTERNAL_GLOB ${file}mini.c
633 $spitshell >>$Makefile <<'!NO!SUBS!'
635 globals$(OBJ_EXT): $(generated_headers)
637 uudmap.h mg_data.h: bitcount.h
639 bitcount.h: generate_uudmap$(HOST_EXE_EXT)
640 $(RUN) ./generate_uudmap$(HOST_EXE_EXT) $(generated_headers)
642 generate_uudmap$(OBJ_EXT): mg_raw.h
644 generate_uudmap$(HOST_EXE_EXT): generate_uudmap$(OBJ_EXT)
645 $(CC) -o generate_uudmap$(EXE_EXT) $(LDFLAGS) generate_uudmap$(OBJ_EXT) $(libs)
647 miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h
648 $(CCCMD) $(PLDLFLAGS) $*.c
650 perlmain.c: $(MINIPERL_EXE) lib/ExtUtils/Miniperl.pm
651 $(MINIPERL) -Ilib -MExtUtils::Miniperl -e 'writemain(@ARGV)' DynaLoader $(static_ext) > perlmain.c
653 perlmain$(OBJ_EXT): perlmain.c
654 $(CCCMD) $(PLDLFLAGS) $*.c
656 # The file ext.libs is a list of libraries that must be linked in
657 # for static extensions, e.g. -lm -lgdbm, etc. The individual
658 # static extension Makefile's add to it.
659 ext.libs: $(static_ext)
660 -@test -f ext.libs || touch ext.libs
664 # How to build libperl. This is still rather convoluted.
665 # Load up custom Makefile.SH fragment for shared loading and executables:
668 Makefile_s="$osname/Makefile.SHs"
674 $spitshell >>$Makefile <<!GROK!THIS!
676 # In AIX we need to change this for building Perl itself from
677 # its earlier definition (which is for building external
678 # extensions *after* Perl has been built and installed)
679 CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'`
682 case "$useshrplib" in
684 $spitshell >>$Makefile <<'!NO!SUBS!'
686 LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT)
687 MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT)
689 $(LIBPERL_NONSHR): $(obj)
690 $(RMS) $(LIBPERL_NONSHR)
691 $(AR) rcu $(LIBPERL_NONSHR) $(obj)
693 $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
694 $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \
695 opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS)
697 MINIPERLEXP = $(MINIPERL_NONSHR)
699 LIBPERLEXPORT = perl.exp
705 $spitshell >>$Makefile <<'!NO!SUBS!'
706 MINIPERLEXP = $(MINIPERL_EXE)
708 PERLEXPORT = perl.exp
713 $spitshell >>$Makefile <<'!NO!SUBS!'
714 perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH)
715 ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp
720 $spitshell >>$Makefile <<'!NO!SUBS!'
721 MINIPERLEXP = miniperl
723 perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
724 ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def
729 $spitshell >>$Makefile <<'!NO!SUBS!'
730 cygwin.c: cygwin/cygwin.c
731 $(LNS) cygwin/cygwin.c
733 LIBPERL_NONSHR = libperl$(LIB_EXT)
735 $(LIBPERL_NONSHR): $(obj)
736 $(RMS) $(LIBPERL_NONSHR)
737 $(AR) rcu $(LIBPERL_NONSHR) $(obj)
743 if test -s $Makefile_s ; then
745 $spitshell >>$Makefile <<!GROK!THIS!
747 Makefile: $Makefile_s
752 $spitshell >>$Makefile <<'!NO!SUBS!'
753 # dtrace dicards const qualifiers from arguments, put them back
754 $(DTRACE_H): perldtrace.d
755 $(DTRACE) -h -s perldtrace.d -o $(DTRACE_H).in
756 sed -e '/const/!s/char \*/const char */g' $(DTRACE_H).in >$(DTRACE_H)
757 $(RMS) $(DTRACE_H).in
759 mydtrace.h: $(DTRACE_H)
766 $spitshell >>$Makefile <<'!NO!SUBS!'
767 $(DTRACE_O): perldtrace.d $(ndt_obj)
768 $(DTRACE) -G -s perldtrace.d -o $(DTRACE_O) $(ndt_obj)
770 $(MINIDTRACE_O): perldtrace.d $(minindt_obj) perlmini$(OBJ_EXT)
771 $(DTRACE) -G -s perldtrace.d -o $(MINIDTRACE_O) $(minindt_obj) perlmini$(OBJ_EXT)
776 $spitshell >>$Makefile <<'!NO!SUBS!'
777 $(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT)
779 case "$useshrplib" in
781 $spitshell >>$Makefile <<'!NO!SUBS!'
783 $(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs)
787 $spitshell >>$Makefile <<'!NO!SUBS!'
788 rm -f libperl$(OBJ_EXT)
789 mv $@ libperl$(OBJ_EXT)
790 $(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
796 $spitshell >>$Makefile <<'!NO!SUBS!'
798 $(AR) rcu $(LIBPERL) $(obj) $(DYNALOADER)
799 @$(ranlib) $(LIBPERL)
803 $spitshell >>$Makefile <<'!NO!SUBS!'
805 # How to build executables.
807 # The $& notation tells Sequent machines that it can do a parallel make,
808 # and is harmless otherwise.
809 # The miniperl -w -MExporter line is a basic cheap test to catch errors
810 # before make goes on to run preplibrary and then MakeMaker on extensions.
811 # This is very handy because later errors are often caused by miniperl
812 # build problems but that's not obvious to the novice.
813 # The Module used here must not depend on Config or any extensions.
817 case "${osname}${osvers}" in
819 $spitshell >>$Makefile <<'!NO!SUBS!'
820 $(MINIPERL_EXE): $& $(mini_obj)
821 $(CC) -o $(MINIPERL_EXE) $(CLDFLAGS) $(mini_obj) $(libs)
822 $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
826 $spitshell >>$Makefile <<'!NO!SUBS!'
827 $(MINIPERL_EXE): $& $(mini_obj)
828 $(CC) -o $(MINIPERL_EXE) $(mini_obj) $(libs)
829 $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
835 *) case "$ldflags" in
836 *"-flat_namespace"*) ;;
837 *) # to allow opmini.o to override stuff in libperl.dylib
838 $spitshell >>$Makefile <<!NO!SUBS!
839 NAMESPACEFLAGS = -force_flat_namespace
845 $spitshell >>$Makefile <<'!NO!SUBS!'
846 $(MINIPERL_EXE): $& $(mini_obj)
848 $(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o $(MINIPERL_EXE) \
850 $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
854 $spitshell >>$Makefile <<'!NO!SUBS!'
855 $(MINIPERL_EXE): $& $(mini_obj)
857 $(LDLIBPTH) $(CC) $(CLDFLAGS) -o $(MINIPERL_EXE) \
859 $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
864 $spitshell >>$Makefile <<'!NO!SUBS!'
866 $(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
868 $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
870 # Purify/Quantify Perls.
872 pure$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
873 $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
875 purecov$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
876 $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
878 quant$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
879 $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
881 # Valgrind perl (currently Linux only)
883 perl.valgrind.config: config.sh
884 @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..."
885 @$(MAKE) perl.config.dashg
886 @echo "Checking usemymalloc='n' in config.sh..."
887 @grep "^usemymalloc=" config.sh
888 @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
889 @echo "And of course you have to have valgrind..."
890 $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1
892 # Third Degree Perl (Tru64 only)
895 @echo "Checking optimize='-g' in config.sh..."
896 @grep "^optimize=" config.sh
897 @egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1
899 perl.third.config: config.sh
900 @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..."
901 @$(MAKE) perl.config.dashg
902 @echo "Checking usemymalloc='n' in config.sh..."
903 @grep "^usemymalloc=" config.sh
904 @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
906 perl.third: /usr/bin/atom perl.third.config perl
907 atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl
908 @echo "Now you may run perl.third and then study perl.3log."
910 # Pixie Perls (Tru64 and IRIX only)
912 perl.pixie.config: config.sh
913 @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..."
914 @$(MAKE) perl.config.dashg
916 perl.pixie.atom: /usr/bin/atom perl
917 atom -tool pixie -L. -all -toolargs="-quiet" perl
919 perl.pixie.irix: perl
922 perl.pixie: /usr/bin/pixie perl.pixie.config perl
923 if test -x /usr/bin/atom; then \
924 $(MAKE) perl.pixie.atom; \
926 $(MAKE) perl.pixie.irix; \
928 @echo "Now you may run perl.pixie and then run pixie."
933 @echo "Checking optimize='-pg' in config.sh..."
934 @grep "^optimize=" config.sh
935 @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1
937 perl.gprof.config: config.sh
938 @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..."
939 @$(MAKE) perl.config.dashpg
941 perl.gprof: /usr/bin/gprof perl.gprof.config
943 $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl
944 @echo "Now you may run perl.gprof and then run gprof perl.gprof."
949 @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..."
950 @echo "Checking gccversion in config.sh..."
951 @grep "^gccversion=" config.sh
952 @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1
953 @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..."
954 @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..."
955 @grep "^ccflags=" config.sh
956 @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1
958 perl.gcov: perl.config.gcov
960 $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl
961 @echo "Now you may run perl.gcov and then run gcov some.c."
963 # Microperl. This is just a convenience thing if one happens to
964 # build also the full Perl and therefore the real big Makefile:
965 # usually one should manually explicitly issue the below command.
969 $(MAKE) -f Makefile.micro
975 # Some environment have no system(), which mkpport uses.
976 # Let's try running the commands with shell.
979 $spitshell >>$Makefile <<!GROK!THIS!
981 makeppport: \$(MINIPERL_EXE) \$(CONFIGPM)
982 -@for f in Makefile.PL PPPort_pm.PL PPPort_xs.PL ppport_h.PL; do \
983 (cd ext/Devel-PPPort && `pwd`/run.sh ../../$(MINIPERL_EXE) -I../../lib \$\$f); \
989 $spitshell >>$Makefile <<'!NO!SUBS!'
991 makeppport: $(MINIPERL_EXE) $(CONFIGPM) $(nonxs_ext)
992 $(MINIPERL) $(Icwd) mkppport
998 $spitshell >>$Makefile <<'!NO!SUBS!'
1001 preplibrary: $(MINIPERL_EXE) $(CONFIGPM) $(PREPLIBRARY_LIBPERL)
1003 $(CONFIGPM_FROM_CONFIG_SH): $(CONFIGPOD)
1005 $(CONFIGPOD): config.sh $(MINIPERL_EXE) configpm Porting/Glossary lib/Config_git.pl
1006 $(MINIPERL) configpm
1008 lib/ExtUtils/Miniperl.pm: miniperlmain.c $(MINIPERL_EXE) minimod.pl $(CONFIGPM)
1009 $(MINIPERL) minimod.pl > lib/ExtUtils/Miniperl.pm
1011 lib/buildcustomize.pl: $(MINIPERL_EXE) write_buildcustomize.pl
1012 $(MINIPERL) write_buildcustomize.pl >lib/buildcustomize.pl
1014 unidatafiles $(unidatafiles) pod/perluniprops.pod: uni.data
1016 uni.data: $(MINIPERL_EXE) $(CONFIGPM) lib/unicore/mktables $(nonxs_ext)
1017 $(MINIPERL) $(Icwd) lib/unicore/mktables -C lib/unicore -P pod -maketest -makelist -p
1018 # Commented out so always runs, mktables looks at far more files than we
1019 # can in this makefile to decide if needs to run or not
1022 # $(PERL_EXE) and ext because buildtoc uses Text::Wrap uses re
1023 # But also this ensures that all extensions are built before we try to scan
1024 # them, which picks up Devel::PPPort's documentation.
1025 pod/perltoc.pod: $(perltoc_pod_prereqs) $(PERL_EXE) $(ext) pod/buildtoc
1026 $(RUN_PERL) -f -Ilib pod/buildtoc --build-toc -q
1028 pod/perlapi.pod: pod/perlintern.pod
1030 pod/perlintern.pod: $(MINIPERL_EXE) autodoc.pl embed.fnc
1031 $(MINIPERL) autodoc.pl
1033 pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST
1034 $(MINIPERL) $(Icwd) pod/perlmodlib.PL -q
1036 pod/perl5153delta.pod: pod/perldelta.pod
1037 $(LNS) perldelta.pod pod/perl5153delta.pod
1039 extra.pods: $(MINIPERL_EXE)
1040 -@test ! -f extra.pods || rm -f `cat extra.pods`
1042 -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
1043 nx=`echo $$x | sed -e "s/README\.//"`; \
1044 $(LNS) ../$$x "pod/perl"$$nx".pod" ; \
1045 echo "pod/perl"$$nx".pod" >> extra.pods ; \
1048 extras.make: $(PERL_EXE)
1049 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
1051 extras.test: $(PERL_EXE)
1052 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
1054 extras.install: $(PERL_EXE)
1055 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
1057 .PHONY: install install-strip install-all install-verbose install-silent \
1058 no-install install.perl install.man install.html
1061 $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)"
1063 install install-all:
1064 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)"
1067 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)"
1070 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)"
1073 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)"
1075 # Set this to an empty string to avoid an attempt of rebuild before install
1076 INSTALL_DEPENDENCE = all
1078 install.perl: $(INSTALL_DEPENDENCE) installperl
1079 $(RUN_PERL) installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
1080 -@test ! -s extras.lst || $(MAKE) extras.install
1082 install.man: all installman
1083 $(RUN_PERL) installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
1085 # XXX Experimental. Hardwired values, but useful for testing.
1086 # Eventually Configure could ask for some of these values.
1087 install.html: all installhtml
1088 -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
1089 $(RUN_PERL) installhtml \
1090 --podroot=. --podpath=. --recurse \
1091 --htmldir=$(privlib)/html \
1092 --htmlroot=$(privlib)/html \
1093 --splithead=pod/perlipc \
1094 --splititem=pod/perlfunc \
1095 --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
1096 --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \
1100 # I now supply perly.c with the kits, so the following section is
1101 # used only if you force bison to run by saying
1103 # You normally shouldn't remake perly.[ch].
1108 @echo "run_byacc is obsolete; try 'make regen_perly' instead"
1110 # this outputs perly.h, perly.act and perly.tab
1114 # We don't want to regenerate perly.c and perly.h, but they might
1115 # appear out-of-date after a patch is applied or a new distribution is
1123 SYM = global.sym globvar.sym perlio.sym
1125 SYMH = perlvars.h intrpvar.h
1129 # The following files are generated automatically
1130 # embed.pl: proto.h embed.h embedvar.h global.sym
1131 # perlapi.h perlapi.c
1132 # opcode.pl: opcode.h opnames.h pp_proto.h
1133 # regcomp.pl: regnodes.h
1134 # warnings.pl: warnings.h lib/warnings.pm
1135 # The correct versions should be already supplied with the perl kit,
1136 # in case you don't have perl available.
1137 # To force them to be regenerated, run
1139 # with your existing copy of perl
1140 # (make regen_headers is kept for backwards compatibility)
1142 AUTOGEN_FILES = opcode.h opnames.h pp_proto.h proto.h \
1143 embed.h embedvar.h global.sym \
1144 perlapi.h perlapi.c regnodes.h \
1145 warnings.h lib/warnings.pm
1147 .PHONY: regen_headers regen_all
1151 -perl regen/uconfig_h.pl
1153 regen_headers: FORCE
1155 -perl regen/uconfig_h.pl -v
1157 regen_meta: META.yml
1160 PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib Porting/makemeta
1163 regen_all: regen regen_meta
1165 .PHONY: manisort manicheck
1168 @perl Porting/manisort -q || (echo "WARNING: re-sorting MANIFEST"; \
1169 perl Porting/manisort -q -o MANIFEST; sh -c true)
1172 perl Porting/manicheck
1175 # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
1176 # automatically get built. There should ordinarily be no need to change
1177 # any of this part of makefile.
1179 # The dummy dependency is a place holder in case $(dynamic_ext) or
1180 # $(static_ext) is empty.
1182 # DynaLoader may be needed for extensions that use Makefile.PL.
1184 $(DYNALOADER): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary FORCE $(nonxs_ext)
1185 $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
1187 d_dummy $(dynamic_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE $(PERLEXPORT)
1188 $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
1190 s_dummy $(static_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE
1191 $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
1193 n_dummy $(nonxs_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary FORCE
1194 $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
1197 $spitshell >>$Makefile <<EOF
1201 $spitshell >>$Makefile <<'!NO!SUBS!'
1205 @eval `$(RUN_PERL) -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR)
1207 .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
1208 realclean _realcleaner clobber _clobber \
1209 distclean veryclean _verycleaner
1213 realclean: _realcleaner _mopup
1214 @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh"
1217 -@rm -f Cross/run-* Cross/to-* Cross/from-*
1219 rm -f config.sh cppstdin Policy.sh extras.lst
1221 clobber: _realcleaner _mopup _clobber
1225 # Like distclean but also removes emacs backups and *.orig.
1226 veryclean: _verycleaner _mopup _clobber
1227 -@rm -f Obsolete Wanted
1229 # Do not 'make _mopup' directly.
1231 rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c perlmini.c generate_uudmap$(EXE_EXT) $(generated_headers)
1233 -@test -f extra.pods && rm -f `cat extra.pods`
1234 -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
1235 -rm -f perl.exp ext.libs $(generated_pods) uni.data opmini.o perlmini.o
1236 -rm -f perl.export perl.dll perl.libexp perl.map perl.def
1237 -rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
1238 -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
1239 -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
1240 -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
1241 -rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
1242 -rm -f $(PERL_EXE) $(MINIPERL_EXE) $(LIBPERL) libperl.* microperl
1243 -rm -f config.arch config.over $(DTRACE_H) runtests
1245 # Do not 'make _tidy' directly.
1247 -cd pod; $(LDLIBPTH) $(MAKE) clean
1248 -cd utils; $(LDLIBPTH) $(MAKE) clean
1249 -cd x2p; $(LDLIBPTH) $(MAKE) clean
1250 -rm -f lib/Config_git.pl git_version.h
1251 -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
1252 $(MINIPERL) make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \
1256 -cd os2; rm -f Makefile
1257 -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN)
1258 -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN)
1259 -cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN)
1260 -@if test -f $(MINIPERL_EXE) ; then \
1261 for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
1262 $(MINIPERL) make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \
1267 rm -f realclean.sh veryclean.sh
1268 -for file in `find cpan dist ext -name ppport.h` ; do rm -f $$file; done
1270 # Dear POSIX, thanks for making the default to xargs to be
1271 # run once if nothhing is passed in. It is such a great help.
1273 # Some systems do not support "?", so keep these files separate.
1275 -rm -f core.*perl.*.? t/core.perl.*.? .?*.c
1276 rm -f core *perl.core t/core t/*perl.core core.* t/core.*
1277 rm -f t/$(PERL_EXE) t/rantests
1279 rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
1280 rm -rf $(addedbyconf)
1281 rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old
1283 rm -rf $(unidatafiles) $(unidatadirs)
1285 rm -f lib/.exists lib/*/.exists lib/*/*/.exists
1286 rm -f h2ph.man pstruct
1289 rm -rf lib/Encode lib/Compress lib/Hash lib/re
1290 rm -rf lib/TAP lib/Module/Pluggable lib/App
1292 rm -rf lib/IO/Compress lib/IO/Uncompress
1293 rm -f lib/ExtUtils/ParseXS/t/XSTest.c
1294 rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT)
1295 rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX)
1297 rm -fr lib/CPAN lib/CPANPLUS
1298 rm -fr lib/ExtUtils/CBuilder
1299 -rmdir cpan/CPANPLUS-Dist-Build/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-localmirror
1301 -rmdir lib/Archive/Tar lib/Archive lib/Attribute
1303 -rmdir lib/Data lib/Devel lib/Digest
1304 -rmdir lib/ExtUtils/Command lib/ExtUtils/Constant lib/ExtUtils/Liblist lib/ExtUtils/MakeMaker
1305 -rmdir lib/File/Spec lib/Filter/Util lib/Filter
1306 -rmdir lib/I18N/LangTags lib/IO/Socket lib/IO lib/IPC
1307 -rmdir lib/List/Util lib/List
1308 -rmdir lib/Locale/Maketext lib/Locale
1309 -rmdir lib/Log/Message lib/Log
1310 -rmdir lib/Math/Big* lib/Math
1311 -rmdir lib/Memoize lib/MIME
1312 -rmdir lib/Module/Build/Platform lib/Module/Build lib/Module/Load lib/Module
1313 -rmdir lib/Net/FTP lib/Object
1314 -rmdir lib/Parse/CPAN lib/Parse
1315 -rmdir lib/PerlIO/via lib/PerlIO
1316 -rmdir lib/Package lib/Params
1317 -rmdir lib/Pod/Perldoc lib/Pod/Simple lib/Pod/Text
1318 -rmdir lib/Sys lib/Scalar/Util lib/Scalar
1319 -rmdir lib/Term/UI lib/Thread lib/Tie/Hash
1320 -rmdir lib/Test/Builder/Tester lib/Test/Builder lib/Test
1321 -rmdir lib/Unicode/Collate
1322 -rmdir lib/XS/APItest lib/XS
1323 -rmdir lib/inc/latest lib/inc
1324 -rmdir lib/autodie/exception lib/autodie lib/encoding lib/threads
1325 -rm -f lib/ExtUtils/CBuilder/t/libcompilet.dll.a
1326 -rm -f lib/ExtUtils/ParseXS/t/libXSTest.dll.a
1329 @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=distclean
1330 @$(LDLIBPTH) $(MAKE) _cleaner2
1333 @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean
1334 @$(LDLIBPTH) $(MAKE) _cleaner2
1335 -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig
1340 lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c)
1344 splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles)
1346 # Need to unset during recursion to go out of loop.
1347 # The README below ensures that the dependency list is never empty and
1348 # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding.
1350 MAKEDEPEND = Makefile makedepend
1352 $(FIRSTMAKEFILE): README $(MAKEDEPEND)
1353 $(MAKE) depend MAKEDEPEND=
1355 config.h: config_h.SH config.sh
1356 $(SHELL) config_h.SH
1360 sh ./makedepend MAKE=$(MAKE)
1361 cd x2p; $(MAKE) depend
1363 # Cannot postpone this until $firstmakefile is ready ;-)
1364 makedepend: makedepend.SH config.sh
1367 runtests: runtests.SH config.sh
1370 .PHONY: test check test_prep test_prep_nodll test_prep_pre \
1371 test_prep_reonly test_tty test-tty test_notty test-notty \
1372 utest ucheck test.utf8 check.utf8 test.torture torturetest \
1373 test.utf16 check.utf16 utest.utf16 ucheck.utf16 \
1374 test.third check.third utest.third ucheck.third test_notty.third \
1375 test.deparse test_notty.deparse test_harness test_harness_notty \
1376 minitest coretest test.taintwarn test-reonly _test
1379 echo >&2 The _test target is deprecated. Please upgrade your smoker
1380 PERL=./perl $(RUN_TESTS) choose
1382 # Cannot delegate rebuilding of t/perl to make
1383 # to allow interlaced test and minitest
1385 # Architecture-neutral stuff:
1387 test_prep_pre: preplibrary utilities $(nonxs_ext)
1389 test_prep: test_prep_pre $(MINIPERL_EXE) $(unidatafiles) $(PERL_EXE) \
1390 $(dynamic_ext) $(TEST_PERL_DLL) runtests x2p/s2p x2p/find2perl \
1392 cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE))
1394 test_prep_reonly: $(MINIPERL_EXE) $(PERL_EXE) $(dynamic_ext_re) $(TEST_PERL_DLL)
1395 $(MINIPERL) make_ext.pl $(dynamic_ext_re) MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
1396 cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE))
1398 test check: test_prep
1404 test_notty: test_prep
1407 utest ucheck test.utf8 check.utf8: test_prep
1408 TEST_ARGS=-utf8 $(RUN_TESTS) choose
1411 TEST_ARGS=-core $(RUN_TESTS) choose
1413 test-prep: test_prep
1417 test-notty: test_notty
1421 test.torture torturetest: test_prep
1422 TEST_ARGS=-torture $(RUN_TESTS) choose
1424 # Targets for UTF16 testing:
1426 minitest.utf16: minitest.prep
1427 - cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE)) \
1428 && $(RUN_PERL) TEST -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
1430 test.utf16 check.utf16: test_prep
1431 TEST_ARGS=-utf16 $(RUN_TESTS) choose
1433 utest.utf16 ucheck.utf16: test_prep
1434 TEST_ARGS="-utf8 -utf16" $(RUN_TESTS) choose
1436 # Targets for valgrind testing:
1438 test_prep.valgrind: test_prep perl.valgrind
1440 test.valgrind check.valgrind: test_prep perl.valgrind.config
1441 PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(RUN_TESTS) choose
1443 utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config
1444 PERL_VALGRIND=1 TEST_ARGS=-utf8 $(RUN_TESTS) choose
1446 test_notty.valgrind: test_prep.valgrind perl.valgrind.config
1447 PERL_VALGRIND=1 $(RUN_TESTS) no-tty
1449 # Targets for Third Degree testing.
1451 test_prep.third: test_prep perl.third
1452 cd t && (rm -f ./perl.third$(EXE_EXT); $(LNS) ../perl.third$(EXE_EXT) perl.third(EXE_EXT))
1454 test.third check.third: test_prep.third perl.third
1455 PERL=./perl.third PERL_3LOG=1 $(RUN_TESTS) choose
1457 utest.third ucheck.third: test_prep.third perl.third
1458 PERL=./perl.third PERL_3LOG=1 TEST_ARGS=-utf8 $(RUN_TESTS) choose
1460 test_notty.third: test_prep.third perl.third
1461 PERL=./perl.third PERL_3LOG=1 $(RUN_TESTS) choose
1463 # Targets for Deparse testing.
1465 test.deparse: test_prep
1466 TEST_ARGS=-deparse $(RUN_TESTS) choose
1468 test_notty.deparse: test_prep
1469 TEST_ARGS=-deparse $(RUN_TESTS) no-tty
1471 # Targets to run the test suite with -t
1473 test.taintwarn: test_prep
1474 TEST_ARGS=-taintwarn $(RUN_TESTS) choose
1477 -@test -f lib/Config.pm || $(MAKE) lib/Config.pm $(unidatafiles)
1479 @echo "You may see some irrelevant test failures if you have been unable"
1480 @echo "to build lib/Config.pm, or the Unicode data files."
1483 # Can't depend on lib/Config.pm because that might be where miniperl
1485 minitest: $(MINIPERL_EXE) minitest.prep
1486 - cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE)) \
1487 && $(RUN_PERL) TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t op/*.t uni/*.t </dev/tty
1491 test_harness: test_prep
1492 TESTFILE=harness $(RUN_TESTS) choose
1494 test_harness_notty: test_prep
1495 HARNESS_NOTTY=1 TESTFILE=harness $(RUN_TESTS) choose
1497 test-reonly: test_prep_reonly
1498 TEST_ARGS='-re \bre\/' TESTFILE=harness $(RUN_TESTS) choose
1501 # Porting tests (well-formedness of pod, manifest, etc)
1503 test_porting: test_prep
1504 cd t && $(RUN_PERL) harness porting/*.t ../lib/diagnostics.t
1506 # Handy way to run perlbug -ok without having to install and run the
1507 # installed perlbug. We don't re-run the tests here - we trust the user.
1508 # Please *don't* use this unless all tests pass.
1509 # If you want to report test failures, use "make nok" instead.
1511 .PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack
1514 $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)'
1517 $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok
1520 $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A
1522 okfilenack: utilities
1523 $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A
1526 $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)'
1529 $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok
1532 $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A
1534 nokfilenack: utilities
1535 $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
1537 .PHONY: clist hlist shlist
1540 echo $(c) | tr ' ' $(TRNL) >.clist
1543 echo $(h) | tr ' ' $(TRNL) >.hlist
1546 echo $(sh) | tr ' ' $(TRNL) >.shlist
1548 Makefile: Makefile.SH ./config.sh
1549 $(SHELL) Makefile.SH
1553 perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
1558 ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c --exclude=perlmini.c *.c *.h
1560 # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
1561 # If this runs make out of memory, delete /usr/include lines.
1568 $ln Makefile ../Makefile
1571 $rm -f $firstmakefile
1573 # Now do any special processing required before building.
1578 echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2
1583 rm -f y.tab.c y.tab.h
1586 # we are using two different yaccs in BS2000 Posix!
1587 byacc a2p.y >/dev/null 2>&1
1590 yacc a2p.y >/dev/null 2>&1
1593 if cmp -s y.tab.c a2p.c
1597 echo "a2p.y -> a2p.c" >&2
1600 sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
1601 -e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \
1602 -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c
1605 # In case somebody yacc -d:ed the a2p.y.
1608 if cmp -s y.tab.h a2p.h
1612 echo "a2p.h -> a2p.h" >&2
1621 # Do nothing in VM/ESA.
1624 echo "'$osname' is an EBCDIC system I don't know that well." >&4
1628 '') echo "No parser files were regenerated. That's okay." >&2 ;;
1633 # ex: set ts=8 sts=4 sw=4 noet: