1 case $PERL_CONFIG_SH in
6 echo "Can't find config.sh."; exit 1
17 # if cross-compilation, the Makefile named accordingly
18 Makefile=Makefile-cross-$CROSS_NAME
19 . Cross/config-${CROSS_NAME}.sh
23 # H.Merijn Brand [17 Feb 2004]
24 # This comment is just to ensure that Configure will find variables that
25 # are removed/replaced in patches on blead, but are still needed in the
26 # 5.8.x, 5.6.x and 5.005.x maintainance tracks.
27 # metaconfig -m will scan all .SH files on this level (not deeper), and
28 # not in x2p and other subfolders. This file is as good as any .SH
33 # H.Merijn Brand [30 Oct 2004]
34 # Mentioned for the same reason for future reference
35 # #23434 $d_strlcat $d_strlcpy
37 : This forces SH files to create target in same directory as SH file.
38 : This is so that make depend always knows where to find SH derivatives.
40 */*) cd `expr X$0 : 'X\(.*\)/'` ;;
43 linklibperl='$(LIBPERL)'
45 shrpldflags='$(LDDLFLAGS)'
47 DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB'
48 DPERL_IS_MINIPERL='-DPERL_IS_MINIPERL'
51 # Prefix all runs of 'miniperl' and 'perl' with
52 # $ldlibpth so that ./perl finds *this* shared libperl.
53 case "$LD_LIBRARY_PATH" in
55 ldlibpth="LD_LIBRARY_PATH=`pwd`";;
57 ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";;
60 pldlflags="$cccdlflags"
62 case "${osname}${osvers}" in
65 lddlflags="-dynamic -undefined warning -framework System \
66 -compatibility_version 1 -current_version $patchlevel \
67 -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
70 shrpldflags="${ldflags} -dynamiclib \
71 -compatibility_version \
72 ${api_revision}.${api_version}.${api_subversion} \
74 ${revision}.${patchlevel}.${subversion} \
75 -install_name \$(shrpdir)/\$@"
78 shrpldflags="$shrpldflags -Wl,--out-implib=libperl.dll.a -Wl,--image-base,0x52000000"
79 linklibperl="-L. -lperl"
84 netbsd*|freebsd[234]*|openbsd*|dragonfly*)
85 linklibperl="-L. -lperl"
88 linklibperl="-L. -lperl"
89 shrpldflags="$shrpldflags -Wl,--image-base,0x57000000"
94 shrpldflags="-shared -Wl,-H512 -Wl,-T512 -Wl,-bhalt:4 -Wl,-bM:SRE -Wl,-bE:perl.exp"
96 3*) shrpldflags="$shrpldflags -e _nostart"
98 *) shrpldflags="$shrpldflags -Wl,-bnoentry"
101 shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
102 linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl"
103 linklibperl_nonshr='-lperl_nonshr'
106 shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
108 3*) shrpldflags="$shrpldflags -e _nostart"
110 *) shrpldflags="$shrpldflags -b noentry"
113 shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
114 linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl"
115 linklibperl_nonshr='-lperl_nonshr'
120 linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl"
123 shrpldflags='-W l,XPLINK,dll'
124 linklibperl='libperl.x'
125 DPERL_EXTERNAL_GLOB=''
128 case "$ldlibpthname" in
136 eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\""
139 # Strip off any trailing :'s
140 ldlibpth=`echo $ldlibpth | sed 's/:*$//'`
146 *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;;
151 # If there is a pre-existing $libperl from a previous
152 # installation, Linux needs to use LD_PRELOAD to
153 # override the LD_LIBRARY_PATH setting. See the
154 # INSTALL file, under "Building a shared perl library".
155 # If there is no pre-existing $libperl, we don't need
156 # to do anything further.
157 if test -f $archlib/CORE/$libperl; then
159 cat <<'EOT' > preload
163 test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD"
167 ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl"
170 os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth"
177 static_ldflags='CCCDLFLAGS='
181 : Prepare dependency lists for Makefile.
183 dynamic_ext_re="lib/auto/re/re.$dlext"
185 for f in $dynamic_ext; do
186 : the dependency named here will never exist
187 base=`echo "$f" | sed 's/.*\///'`
188 this_target="lib/auto/$f/$base.$dlext"
189 dynamic_list="$dynamic_list $this_target"
191 : Parallel makes reveal that we have some interdependencies
193 Encode) extra_dep="$extra_dep
194 $this_target: lib/auto/Cwd/Cwd.$dlext" ;;
195 Math/BigInt/FastCalc|Devel/NYTProf) extra_dep="$extra_dep
196 $this_target: lib/auto/List/Util/Util.$dlext" ;;
197 Unicode/Normalize) extra_dep="$extra_dep
198 $this_target: uni.data" ;;
199 Text/ParseWords) extra_dep="$extra_dep
200 $this_target: lib/auto/Scalar/Util.$dlext" ;;
201 SDBM_File) extra_dep="$extra_dep
202 $this_target: lib/auto/Cwd/Cwd.$dlext" ;;
207 for f in $static_ext; do
208 base=`echo "$f" | sed 's/.*\///'`
209 static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
210 : Parallel makes reveal that we have some interdependencies
211 this_target="lib/auto/$f/$base\$(LIB_EXT)"
213 Math/BigInt/FastCalc|Devel/NYTProf) extra_dep="$extra_dep
214 $this_target: lib/auto/List/Util/Util\$(LIB_EXT)" ;;
215 Unicode/Normalize) extra_dep="$extra_dep
216 $this_target: uni.data" ;;
221 for f in $nonxs_ext; do
222 p=`echo "$f" | tr / -`
223 for d in ext dist cpan; do
224 if test -d $d/$p; then
225 nonxs_list="$nonxs_list $d/$p/pm_to_blib"
234 dtrace_h='perldtrace.h'
235 $dtrace -G -s perldtrace.d -o perldtrace.tmp >/dev/null 2>&1 \
236 && rm -f perldtrace.tmp && dtrace_o='perldtrace$(OBJ_EXT)'
240 echo "Extracting $Makefile (with variable substitutions)"
241 $spitshell >$Makefile <<!GROK!THIS!
243 # This file is derived from Makefile.SH. Any changes made here will
244 # be lost the next time you run Configure.
245 # Makefile is used to generate $firstmakefile. The only difference
246 # is that $firstmakefile has the dependencies filled in at the end.
254 mallocsrc = $mallocsrc
255 mallocobj = $mallocobj
259 # NOTE: some systems don't grok "cp -f". XXX Configure test needed?
264 # The following are mentioned only to make metaconfig include the
265 # appropriate questions in Configure. If you want to change these,
266 # edit config.sh instead, or specify --man1dir=/wherever on
267 # installman commandline.
269 scriptdir = $scriptdir
270 shrpdir = $archlibexp/CORE
271 privlib = $installprivlib
277 # The following are used to build and install shared libraries for
279 LDDLFLAGS = $lddlflags
280 SHRPLDFLAGS = $shrpldflags
281 CCDLFLAGS = $ccdlflags
283 PLDLFLAGS = $pldlflags
285 LLIBPERL= $linklibperl
286 LLIBPERL_NONSHR= $linklibperl_nonshr
289 # Static targets are ordinarily built without CCCDLFLAGS. However,
290 # if building a shared libperl.so that might later be linked into
291 # another application, then it might be appropriate to also build static
292 # extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC
294 STATIC_LDFLAGS = $static_ldflags
296 # The following is used to include the current directory in
297 # the dynamic loader path you are building a shared libperl.
300 # Sometimes running an executable is an adventure.
303 # These variables may need to be manually set for non-Unix systems.
311 # Macros to invoke a copy of miniperl during the build. Targets which
312 # are built using these macros should depend on \$(MINIPERL_EXE)
313 MINIPERL_EXE = miniperl\$(EXE_EXT)
314 MINIPERL = \$(LDLIBPTH) \$(RUN) ./miniperl\$(EXE_EXT) -Ilib
316 # Macros to invoke a copy of our fully operational perl during the build.
317 PERL_EXE = perl\$(EXE_EXT)
318 RUN_PERL = \$(LDLIBPTH) \$(RUN) ./perl\$(EXE_EXT)
320 # Macros to run our tests
321 RUN_TESTS = \$(LDLIBPTH) ./runtests
323 dynamic_ext = $dynamic_list
324 dynamic_ext_re = $dynamic_ext_re
325 static_ext = $static_list
326 nonxs_ext = $nonxs_list
327 ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext)
328 DYNALOADER = DynaLoader\$(OBJ_EXT)
330 libs = $perllibs $cryptlib
332 public = \$(PERL_EXE) utilities translators
334 shellflags = $shellflags
336 # This is set to MAKE=$make if your $make command doesn't
340 # Mention $gmake here so it gets probed for by Configure.
342 # If you're going to use valgrind and it can't be invoked as plain valgrind
343 # then you'll need to change this, or override it on the make command line.
350 FIRSTMAKEFILE = $firstmakefile
352 # Any special object files needed by this architecture, e.g. os2/os2.obj
355 .SUFFIXES: .c \$(OBJ_EXT) .i .s
360 # how to tr(anslate) newlines
367 INSTALLPREFIXEXP = $prefix
370 # not used by Makefile but by installperl;
371 # mentioned here so that metaconfig picks these up
375 case "${osname}:${osvers}" in
377 $spitshell >>$Makefile <<EOF
379 # Your locales are broken (osname $osname, osvers $osvers)
380 # and to avoid the numerous
381 # perl: warning: Setting locale failed.
382 # warnings during the build process we reset the locale variables.
393 ## In the following dollars and backticks do not need the extra backslash.
394 $spitshell >>$Makefile <<'!NO!SUBS!'
396 CCCMD = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $@`
398 CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<`
400 CONFIGPM_FROM_CONFIG_SH = lib/Config.pm lib/Config_heavy.pl
401 CONFIGPM = $(CONFIGPM_FROM_CONFIG_SH) lib/Config_git.pl
403 CONFIGPOD = lib/Config.pod
409 # if cross-compilation
410 $spitshell >>$Makefile <<!GROK!THIS!
411 CROSS_NAME = $CROSS_NAME
412 CROSS_LIB = xlib/$CROSS_NAME
414 CCCMD = \`sh \$(shellflags) cflags-cross-$CROSS_NAME "optimize='\$(OPTIMIZE)'" \$@\` -I\$(CROSS_LIB)
415 CCCMDSRC = \`sh \$(shellflags) cflags-cross-$CROSS_NAME "optimize='\$(OPTIMIZE)'" \$<\` -I\$(CROSS_LIB)
416 CONFIGPM = xlib/\$(CROSS_NAME)/Config.pm
417 CONFIGPOD = xlib/\$(CROSS_NAME)/Config.pod
420 xconfig.h: config_h.SH Cross/config-\$(CROSS_NAME).sh
421 CONFIG_SH=Cross/config-\$(CROSS_NAME).sh CONFIG_H=xconfig.h \$(SHELL) config_h.SH
422 #TODO \$(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib -MCross=\$(CROSS_NAME) config_h.PL "INST_VER=\$(INST_VER)" "CORE_DIR=\$(CROSS_LIB)" "CONFIG_H=xconfig.h"
423 cp xconfig.h \$(CROSS_LIB)/
424 cp xconfig.h \$(CROSS_LIB)/config.h
430 ## In the following dollars and backticks do not need the extra backslash.
431 $spitshell >>$Makefile <<'!NO!SUBS!'
433 private = preplibrary $(CONFIGPM) $(CONFIGPOD) lib/ExtUtils/Miniperl.pm git_version.h
435 # Files to be built with variable substitution before miniperl
437 sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
438 myconfig.SH writemain.SH pod/Makefile.SH
440 shextract = Makefile cflags config.h makeaperl makedepend \
441 makedir myconfig writemain pod/Makefile
443 # Files to be built with variable substitution after miniperl is
444 # available. Dependencies handled manually below (for now).
446 pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \
447 pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL
449 plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \
450 pod/pod2usage pod/podchecker pod/podselect
452 addedbyconf = UU $(shextract) $(plextract) pstruct
454 # Unicode data files generated by mktables
455 unidatafiles = lib/unicore/Decomposition.pl lib/unicore/TestProp.pl \
456 lib/unicore/CombiningClass.pl lib/unicore/Name.pl \
457 lib/unicore/Heavy.pl lib/unicore/mktables.lst
459 # Directories of Unicode data files generated by mktables
460 unidatadirs = lib/unicore/To lib/unicore/lib
462 h1 = EXTERN.h INTERN.h XSUB.h av.h $(CONFIGH) cop.h cv.h dosish.h
463 h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h
464 h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
465 h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
466 h5 = utf8.h warnings.h mydtrace.h op_reg_common.h
467 h = $(h1) $(h2) $(h3) $(h4) $(h5)
469 c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c
470 c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
471 c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c
472 c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c
473 c5 = $(madlysrc) $(mallocsrc)
475 c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c perlmini.c
477 obj0 = op$(OBJ_EXT) perl$(OBJ_EXT)
478 obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT)
479 obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
480 obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
482 mini_obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS) $(DTRACE_O)
483 ndt_obj = $(obj0) $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
484 obj = $(ndt_obj) $(DTRACE_O)
486 perltoc_pod_prereqs = extra.pods pod/perl5136delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
487 generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs)
489 Icwd = -Idist/Cwd -Idist/Cwd/lib
497 -errchk=parentheses \
501 -erroff=E_ASSIGN_NARROW_CONV \
502 -erroff=E_BAD_PTR_CAST \
503 -erroff=E_BAD_PTR_CAST_ALIGN \
504 -erroff=E_BAD_PTR_INT_COMBINATION \
505 -erroff=E_BAD_SIGN_EXTEND \
506 -erroff=E_BLOCK_DECL_UNUSED \
507 -erroff=E_CASE_FALLTHRU \
508 -erroff=E_CONST_EXPR \
509 -erroff=E_CONSTANT_CONDITION \
510 -erroff=E_END_OF_LOOP_CODE_NOT_REACHED \
511 -erroff=E_EQUALITY_NOT_ASSIGNMENT \
512 -erroff=E_EXPR_NULL_EFFECT \
513 -erroff=E_FALSE_LOGICAL_EXPR \
514 -erroff=E_INCL_NUSD \
515 -erroff=E_LOOP_EMPTY \
516 -erroff=E_MAIN_PARAM \
517 -erroff=E_POINTER_TO_OBJECT \
518 -erroff=E_PTRDIFF_OVERFLOW \
519 -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \
520 -erroff=E_STATIC_UNUSED \
521 -erroff=E_TRUE_LOGICAL_EXPR
524 -I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \
525 -D__builtin_va_list=va_list \
526 -Dsigjmp_buf=jmp_buf \
550 $(CCCMD) $(PLDLFLAGS) $*.c
553 $(CCCMDSRC) -E $*.c > $*.i
558 all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) miniperl $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
560 @echo " Everything is up to date. Type '$(MAKE) test' to run test suite."
562 .PHONY: all translators utilities
564 # Both git_version.h and lib/Config_git.pl are built
565 # by make_patchnum.pl.
566 git_version.h: lib/Config_git.pl
568 lib/Config_git.pl: $(MINIPERL_EXE) make_patchnum.pl
569 $(MINIPERL) make_patchnum.pl
571 # make sure that we recompile perl.c if the git version changes
572 perl$(OBJ_EXT): git_version.h
574 translators: $(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) FORCE
575 @echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all
577 utilities: $(MINIPERL_EXE) $(CONFIGPM) $(plextract) FORCE
578 @echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all
581 # This is now done by installman only if you actually want the man pages.
582 # @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
584 # Phony target to force checking subdirectories.
585 # Apparently some makes require an action for the FORCE target.
591 for file in op perl; do
592 if $issymlink $file.c; then
593 $spitshell >>$Makefile <<!GROK!THIS!
595 # We do a copy of the $file.c instead of a symlink because gcc gets huffy
596 # if we have a symlink forest to another disk (it complains about too many
597 # levels of symbolic links, even if we have only two)
599 ${file}mini.c: $file.c
600 \$(RMS) ${file}mini.c
601 \$(CPS) ${file}.c ${file}mini.c
604 $spitshell >>$Makefile <<!GROK!THIS!
606 ${file}mini.c: $file.c
607 \$(RMS) ${file}mini.c
608 \$(LNS) ${file}.c ${file}mini.c
612 $spitshell >>$Makefile <<!GROK!THIS!
614 ${file}mini\$(OBJ_EXT): ${file}mini.c
615 \$(CCCMD) \$(PLDLFLAGS) $DPERL_IS_MINIPERL $DPERL_EXTERNAL_GLOB ${file}mini.c
619 $spitshell >>$Makefile <<'!NO!SUBS!'
621 globals$(OBJ_EXT): uudmap.h bitcount.h
625 bitcount.h: generate_uudmap$(HOST_EXE_EXT)
626 $(RUN) ./generate_uudmap$(HOST_EXE_EXT) uudmap.h bitcount.h
628 generate_uudmap$(HOST_EXE_EXT): generate_uudmap$(OBJ_EXT)
629 $(CC) -o generate_uudmap$(EXE_EXT) $(LDFLAGS) generate_uudmap$(OBJ_EXT) $(libs)
631 miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h
632 $(CCCMD) $(PLDLFLAGS) $*.c
634 perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
635 sh writemain $(DYNALOADER) $(static_ext) > perlmain.c
637 perlmain$(OBJ_EXT): perlmain.c
638 $(CCCMD) $(PLDLFLAGS) $*.c
640 # The file ext.libs is a list of libraries that must be linked in
641 # for static extensions, e.g. -lm -lgdbm, etc. The individual
642 # static extension Makefile's add to it.
643 ext.libs: $(static_ext)
644 -@test -f ext.libs || touch ext.libs
648 # How to build libperl. This is still rather convoluted.
649 # Load up custom Makefile.SH fragment for shared loading and executables:
652 Makefile_s="$osname/Makefile.SHs"
658 $spitshell >>$Makefile <<!GROK!THIS!
660 # In AIX we need to change this for building Perl itself from
661 # its earlier definition (which is for building external
662 # extensions *after* Perl has been built and installed)
663 CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'`
666 case "$useshrplib" in
668 $spitshell >>$Makefile <<'!NO!SUBS!'
670 LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT)
671 MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT)
673 $(LIBPERL_NONSHR): $(obj)
674 $(RMS) $(LIBPERL_NONSHR)
675 $(AR) rcu $(LIBPERL_NONSHR) $(obj)
677 $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
678 $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \
679 opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS)
681 MINIPERLEXP = $(MINIPERL_NONSHR)
683 LIBPERLEXPORT = perl.exp
689 $spitshell >>$Makefile <<'!NO!SUBS!'
690 MINIPERLEXP = $(MINIPERL_EXE)
692 PERLEXPORT = perl.exp
697 $spitshell >>$Makefile <<'!NO!SUBS!'
698 perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH)
699 ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp
704 $spitshell >>$Makefile <<'!NO!SUBS!'
705 MINIPERLEXP = miniperl
707 perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
708 ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def
713 $spitshell >>$Makefile <<'!NO!SUBS!'
714 cygwin.c: cygwin/cygwin.c
715 $(LNS) cygwin/cygwin.c
717 LIBPERL_NONSHR = libperl$(LIB_EXT)
719 $(LIBPERL_NONSHR): $(obj)
720 $(RMS) $(LIBPERL_NONSHR)
721 $(AR) rcu $(LIBPERL_NONSHR) $(obj)
727 if test -s $Makefile_s ; then
729 $spitshell >>$Makefile <<!GROK!THIS!
731 Makefile: $Makefile_s
736 $spitshell >>$Makefile <<'!NO!SUBS!'
737 $(DTRACE_H): perldtrace.d
738 $(DTRACE) -h -s perldtrace.d -o $(DTRACE_H)
740 mydtrace.h: $(DTRACE_H)
747 $spitshell >>$Makefile <<'!NO!SUBS!'
748 $(DTRACE_O): perldtrace.d
749 $(DTRACE) -G -s perldtrace.d -o $(DTRACE_O) $(ndt_obj)
754 $spitshell >>$Makefile <<'!NO!SUBS!'
755 $(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT)
757 case "$useshrplib" in
759 $spitshell >>$Makefile <<'!NO!SUBS!'
761 $(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs)
765 $spitshell >>$Makefile <<'!NO!SUBS!'
766 rm -f libperl$(OBJ_EXT)
767 mv $@ libperl$(OBJ_EXT)
768 $(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
774 $spitshell >>$Makefile <<'!NO!SUBS!'
776 $(AR) rcu $(LIBPERL) $(obj) $(DYNALOADER)
777 @$(ranlib) $(LIBPERL)
781 $spitshell >>$Makefile <<'!NO!SUBS!'
783 # How to build executables.
785 # The $& notation tells Sequent machines that it can do a parallel make,
786 # and is harmless otherwise.
787 # The miniperl -w -MExporter line is a basic cheap test to catch errors
788 # before make goes on to run preplibrary and then MakeMaker on extensions.
789 # This is very handy because later errors are often caused by miniperl
790 # build problems but that's not obvious to the novice.
791 # The Module used here must not depend on Config or any extensions.
795 case "${osname}${osvers}" in
797 $spitshell >>$Makefile <<'!NO!SUBS!'
798 $(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
799 $(CC) -o $(MINIPERL_EXE) $(CLDFLAGS) \
801 miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs)
802 $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
806 $spitshell >>$Makefile <<'!NO!SUBS!'
807 $(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) perlmini$(OBJ_EXT) opmini$(OBJ_EXT)
808 $(CC) -o $(MINIPERL_EXE) $(mini_obj) \
809 miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs)
810 $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
816 *) case "$ldflags" in
817 *"-flat_namespace"*) ;;
818 *) # to allow opmini.o to override stuff in libperl.dylib
819 $spitshell >>$Makefile <<!NO!SUBS!
820 NAMESPACEFLAGS = -force_flat_namespace
826 $spitshell >>$Makefile <<'!NO!SUBS!'
827 $(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
829 $(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o $(MINIPERL_EXE) \
831 miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs)
832 $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
836 $spitshell >>$Makefile <<'!NO!SUBS!'
837 $(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
839 $(LDLIBPTH) $(CC) $(CLDFLAGS) -o $(MINIPERL_EXE) \
841 miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs)
842 $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
847 $spitshell >>$Makefile <<'!NO!SUBS!'
849 $(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
851 $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
853 # Purify/Quantify Perls.
855 pure$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
856 $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
858 purecov$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
859 $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
861 quant$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
862 $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
864 # Valgrind perl (currently Linux only)
866 perl.valgrind.config: config.sh
867 @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..."
868 @$(MAKE) perl.config.dashg
869 @echo "Checking usemymalloc='n' in config.sh..."
870 @grep "^usemymalloc=" config.sh
871 @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
872 @echo "And of course you have to have valgrind..."
873 $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1
875 # Third Degree Perl (Tru64 only)
878 @echo "Checking optimize='-g' in config.sh..."
879 @grep "^optimize=" config.sh
880 @egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1
882 perl.third.config: config.sh
883 @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..."
884 @$(MAKE) perl.config.dashg
885 @echo "Checking usemymalloc='n' in config.sh..."
886 @grep "^usemymalloc=" config.sh
887 @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
889 perl.third: /usr/bin/atom perl.third.config perl
890 atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl
891 @echo "Now you may run perl.third and then study perl.3log."
893 # Pixie Perls (Tru64 and IRIX only)
895 perl.pixie.config: config.sh
896 @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..."
897 @$(MAKE) perl.config.dashg
899 perl.pixie.atom: /usr/bin/atom perl
900 atom -tool pixie -L. -all -toolargs="-quiet" perl
902 perl.pixie.irix: perl
905 perl.pixie: /usr/bin/pixie perl.pixie.config perl
906 if test -x /usr/bin/atom; then \
907 $(MAKE) perl.pixie.atom; \
909 $(MAKE) perl.pixie.irix; \
911 @echo "Now you may run perl.pixie and then run pixie."
916 @echo "Checking optimize='-pg' in config.sh..."
917 @grep "^optimize=" config.sh
918 @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1
920 perl.gprof.config: config.sh
921 @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..."
922 @$(MAKE) perl.config.dashpg
924 perl.gprof: /usr/bin/gprof perl.gprof.config
926 $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl
927 @echo "Now you may run perl.gprof and then run gprof perl.gprof."
932 @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..."
933 @echo "Checking gccversion in config.sh..."
934 @grep "^gccversion=" config.sh
935 @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1
936 @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..."
937 @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..."
938 @grep "^ccflags=" config.sh
939 @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1
941 perl.gcov: perl.config.gcov
943 $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl
944 @echo "Now you may run perl.gcov and then run gcov some.c."
946 # Microperl. This is just a convenience thing if one happens to
947 # build also the full Perl and therefore the real big Makefile:
948 # usually one should manually explicitly issue the below command.
952 $(MAKE) -f Makefile.micro
958 # Some environment have no system(), which mkpport uses.
959 # Let's try running the commands with shell.
962 $spitshell >>$Makefile <<!GROK!THIS!
964 makeppport: \$(MINIPERL_EXE) \$(CONFIGPM)
965 -@for f in Makefile.PL PPPort_pm.PL PPPort_xs.PL ppport_h.PL; do \
966 (cd ext/Devel-PPPort && `pwd`/run.sh ../../$(MINIPERL_EXE) -I../../lib \$\$f); \
972 $spitshell >>$Makefile <<'!NO!SUBS!'
974 makeppport: $(MINIPERL_EXE) $(CONFIGPM) $(nonxs_ext)
975 $(MINIPERL) $(Icwd) mkppport
981 $spitshell >>$Makefile <<'!NO!SUBS!'
984 preplibrary: $(MINIPERL_EXE) $(CONFIGPM) lib/re.pm $(PREPLIBRARY_LIBPERL)
986 $(CONFIGPM_FROM_CONFIG_SH): $(CONFIGPOD)
988 $(CONFIGPOD): config.sh $(MINIPERL_EXE) configpm Porting/Glossary lib/Config_git.pl
991 lib/ExtUtils/Miniperl.pm: miniperlmain.c $(MINIPERL_EXE) minimod.pl $(CONFIGPM)
992 $(MINIPERL) minimod.pl > lib/ExtUtils/Miniperl.pm
994 lib/re.pm: ext/re/re.pm
996 cp ext/re/re.pm lib/re.pm
998 $(plextract): $(MINIPERL_EXE) $(CONFIGPM) x2p/s2p $(dynamic_ext)
1002 x2p/s2p: $(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) x2p/s2p.PL
1003 cd x2p; $(LDLIBPTH) $(MAKE) s2p
1005 unidatafiles $(unidatafiles) pod/perluniprops.pod: uni.data
1007 uni.data: $(MINIPERL_EXE) $(CONFIGPM) lib/unicore/mktables $(nonxs_ext)
1008 $(MINIPERL) $(Icwd) lib/unicore/mktables -C lib/unicore -P pod -maketest -makelist -p
1009 # Commented out so always runs, mktables looks at far more files than we
1010 # can in this makefile to decide if needs to run or not
1013 # $(PERL_EXE) and ext because buildtoc uses Text::Wrap uses re
1014 # But also this ensures that all extensions are built before we try to scan
1015 # them, which picks up Devel::PPPort's documentation.
1016 pod/perltoc.pod: $(perltoc_pod_prereqs) $(PERL_EXE) $(ext) pod/buildtoc
1017 $(RUN_PERL) -f -Ilib pod/buildtoc --build-toc -q
1019 pod/perlapi.pod: pod/perlintern.pod
1021 pod/perlintern.pod: $(MINIPERL_EXE) autodoc.pl embed.fnc
1022 $(MINIPERL) autodoc.pl
1024 pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST
1025 $(MINIPERL) $(Icwd) pod/perlmodlib.PL -q
1027 pod/perl5136delta.pod: pod/perldelta.pod
1028 $(LNS) perldelta.pod pod/perl5136delta.pod
1030 extra.pods: $(MINIPERL_EXE)
1031 -@test ! -f extra.pods || rm -f `cat extra.pods`
1033 -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
1034 nx=`echo $$x | sed -e "s/README\.//"`; \
1035 $(LNS) ../$$x "pod/perl"$$nx".pod" ; \
1036 echo "pod/perl"$$nx".pod" >> extra.pods ; \
1039 extras.make: $(PERL_EXE)
1040 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
1042 extras.test: $(PERL_EXE)
1043 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
1045 extras.install: $(PERL_EXE)
1046 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
1048 .PHONY: install install-strip install-all install-verbose install-silent \
1049 no-install install.perl install.man install.html
1052 $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)"
1054 install install-all:
1055 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)"
1058 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)"
1061 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)"
1064 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)"
1066 # Set this to an empty string to avoid an attempt of rebuild before install
1067 INSTALL_DEPENDENCE = all
1069 install.perl: $(INSTALL_DEPENDENCE) installperl
1070 $(RUN_PERL) installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
1071 -@test ! -s extras.lst || $(MAKE) extras.install
1073 install.man: all installman
1074 $(RUN_PERL) installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
1076 # XXX Experimental. Hardwired values, but useful for testing.
1077 # Eventually Configure could ask for some of these values.
1078 install.html: all installhtml
1079 -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
1080 $(RUN_PERL) installhtml \
1081 --podroot=. --podpath=. --recurse \
1082 --htmldir=$(privlib)/html \
1083 --htmlroot=$(privlib)/html \
1084 --splithead=pod/perlipc \
1085 --splititem=pod/perlfunc \
1086 --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
1087 --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \
1091 # I now supply perly.c with the kits, so the following section is
1092 # used only if you force bison to run by saying
1094 # You normally shouldn't remake perly.[ch].
1099 @echo "run_byacc is obsolete; try 'make regen_perly' instead"
1101 # this outputs perly.h, perly.act and perly.tab
1105 # We don't want to regenerate perly.c and perly.h, but they might
1106 # appear out-of-date after a patch is applied or a new distribution is
1114 # No compat3.sym here since and including the 5.004_50.
1115 # No interp.sym since 5.005_03.
1116 SYM = global.sym globvar.sym perlio.sym pp.sym
1118 SYMH = perlvars.h intrpvar.h
1122 # The following files are generated automatically
1123 # embed.pl: proto.h embed.h embedvar.h global.sym
1124 # perlapi.h perlapi.c
1125 # [* embed.pl needs pp.sym generated by opcode.pl! *]
1126 # keywords.pl: keywords.h
1127 # opcode.pl: opcode.h opnames.h pp_proto.h pp.sym
1128 # regcomp.pl: regnodes.h
1129 # warnings.pl: warnings.h lib/warnings.pm
1130 # The correct versions should be already supplied with the perl kit,
1131 # in case you don't have perl available.
1132 # To force them to be regenerated, run
1134 # with your existing copy of perl
1135 # (make regen_headers is kept for backwards compatibility)
1137 AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \
1138 embed.h embedvar.h global.sym \
1139 perlapi.h perlapi.c regnodes.h \
1140 warnings.h lib/warnings.pm
1142 .PHONY: regen_headers regen_all
1147 regen_headers: FORCE
1150 regen_meta: META.yml
1153 PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib Porting/makemeta
1156 regen_all: regen regen_meta
1158 .PHONY: manisort manicheck
1161 @perl Porting/manisort -q || (echo "WARNING: re-sorting MANIFEST"; \
1162 perl Porting/manisort -q -o MANIFEST; sh -c true)
1165 perl Porting/manicheck
1168 # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
1169 # automatically get built. There should ordinarily be no need to change
1170 # any of this part of makefile.
1172 # The dummy dependency is a place holder in case $(dynamic_ext) or
1173 # $(static_ext) is empty.
1175 # DynaLoader may be needed for extensions that use Makefile.PL.
1177 $(DYNALOADER): $(MINIPERL_EXE) preplibrary FORCE $(nonxs_ext)
1178 $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
1180 d_dummy $(dynamic_ext): $(MINIPERL_EXE) preplibrary makeppport $(DYNALOADER) FORCE $(PERLEXPORT)
1181 $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
1183 s_dummy $(static_ext): $(MINIPERL_EXE) preplibrary makeppport $(DYNALOADER) FORCE
1184 $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
1186 n_dummy $(nonxs_ext): $(MINIPERL_EXE) preplibrary FORCE
1187 $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
1190 $spitshell >>$Makefile <<EOF
1194 $spitshell >>$Makefile <<'!NO!SUBS!'
1198 @eval `$(RUN_PERL) -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR)
1200 .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
1201 realclean _realcleaner clobber _clobber \
1202 distclean veryclean _verycleaner
1206 realclean: _realcleaner _mopup
1207 @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh"
1210 -@rm -f Cross/run-* Cross/to-* Cross/from-*
1212 rm -f config.sh cppstdin Policy.sh extras.lst
1214 clobber: _realcleaner _mopup _clobber
1218 # Like distclean but also removes emacs backups and *.orig.
1219 veryclean: _verycleaner _mopup _clobber
1220 -@rm -f Obsolete Wanted
1222 # Do not 'make _mopup' directly.
1224 rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c perlmini.c uudmap.h generate_uudmap$(EXE_EXT) bitcount.h
1226 -@test -f extra.pods && rm -f `cat extra.pods`
1227 -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
1228 -rm -f perl.exp ext.libs $(generated_pods) uni.data opmini.o perlmini.o
1229 -rm -f perl.export perl.dll perl.libexp perl.map perl.def
1230 -rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
1231 -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
1232 -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
1233 -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
1234 -rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
1235 -rm -f $(PERL_EXE) $(MINIPERL_EXE) $(LIBPERL) libperl.* microperl
1236 -rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old
1237 -rm -f config.arch config.over $(DTRACE_H) runtests
1239 # Do not 'make _tidy' directly.
1241 -cd pod; $(LDLIBPTH) $(MAKE) clean
1242 -cd utils; $(LDLIBPTH) $(MAKE) clean
1243 -cd x2p; $(LDLIBPTH) $(MAKE) clean
1244 -rm -f lib/Config_git.pl git_version.h
1245 -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
1246 $(MINIPERL) make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \
1250 -cd os2; rm -f Makefile
1251 -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN)
1252 -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN)
1253 -cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN)
1254 -@if test -f $(MINIPERL_EXE) ; then \
1255 for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
1256 $(MINIPERL) make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \
1261 rm -f realclean.sh veryclean.sh
1262 -for file in `find cpan dist ext -name ppport.h` ; do rm -f $$file; done
1264 # Dear POSIX, thanks for making the default to xargs to be
1265 # run once if nothhing is passed in. It is such a great help.
1267 # Some systems do not support "?", so keep these files separate.
1269 -rm -f core.*perl.*.? t/core.perl.*.? .?*.c
1270 rm -f core *perl.core t/core t/*perl.core core.* t/core.*
1271 rm -f t/misctmp* t/forktmp* t/tmp* t/c t/$(PERL_EXE) t/rantests
1272 rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
1273 rm -rf $(addedbyconf)
1274 rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old
1276 rm -rf $(unidatafiles) $(unidatadirs)
1278 rm -f lib/.exists lib/*/.exists lib/*/*/.exists
1279 rm -f h2ph.man pstruct
1281 rm -f preload lib/re.pm
1282 rm -rf lib/Encode lib/Compress lib/Hash lib/re
1283 rm -rf lib/TAP lib/Module/Pluggable lib/App
1285 rm -rf lib/IO/Compress lib/IO/Uncompress
1286 rm -f lib/ExtUtils/ParseXS/t/XSTest.c
1287 rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT)
1288 rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX)
1290 rm -fr lib/CPAN lib/CPANPLUS
1291 rm -fr lib/ExtUtils/CBuilder
1292 -rmdir cpan/CPANPLUS-Dist-Build/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-localmirror
1294 -rmdir lib/Archive/Tar lib/Archive lib/Attribute
1296 -rmdir lib/Data lib/Devel lib/Digest
1297 -rmdir lib/ExtUtils/Command lib/ExtUtils/Constant lib/ExtUtils/Liblist lib/ExtUtils/MakeMaker
1298 -rmdir lib/File/Spec lib/Filter/Util lib/Filter
1299 -rmdir lib/I18N/LangTags lib/IO/Socket lib/IO lib/IPC
1300 -rmdir lib/List/Util lib/List
1301 -rmdir lib/Locale/Maketext lib/Locale
1302 -rmdir lib/Log/Message lib/Log
1303 -rmdir lib/Math/Big* lib/Math
1304 -rmdir lib/Memoize lib/MIME
1305 -rmdir lib/Module/Build/Platform lib/Module/Build lib/Module/Load lib/Module
1306 -rmdir lib/Net/FTP lib/Object
1307 -rmdir lib/Parse/CPAN lib/Parse
1308 -rmdir lib/PerlIO/via lib/PerlIO
1309 -rmdir lib/Package lib/Params
1310 -rmdir lib/Pod/Perldoc lib/Pod/Simple lib/Pod/Text
1311 -rmdir lib/Sys lib/Scalar/Util lib/Scalar
1312 -rmdir lib/Term/UI lib/Thread
1313 -rmdir lib/Test/Builder/Tester lib/Test/Builder lib/Test
1314 -rmdir lib/Unicode/Collate
1315 -rmdir lib/XS/APItest lib/XS
1316 -rmdir lib/inc/latest lib/inc
1317 -rmdir lib/autodie/exception lib/autodie lib/encoding lib/threads
1318 -rm -f lib/ExtUtils/CBuilder/t/libcompilet.dll.a
1319 -rm -f lib/ExtUtils/ParseXS/t/libXSTest.dll.a
1322 @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=distclean
1323 @$(LDLIBPTH) $(MAKE) _cleaner2
1326 @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean
1327 @$(LDLIBPTH) $(MAKE) _cleaner2
1328 -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig
1333 lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c)
1337 splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles)
1339 # Need to unset during recursion to go out of loop.
1340 # The README below ensures that the dependency list is never empty and
1341 # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding.
1343 MAKEDEPEND = Makefile makedepend
1345 $(FIRSTMAKEFILE): README $(MAKEDEPEND)
1346 $(MAKE) depend MAKEDEPEND=
1348 config.h: config_h.SH config.sh
1349 $(SHELL) config_h.SH
1351 # When done, touch perlmain.c so that it doesn't get remade each time.
1354 sh ./makedepend MAKE=$(MAKE)
1355 - test -s perlmain.c && touch perlmain.c
1356 cd x2p; $(MAKE) depend
1358 # Cannot postpone this until $firstmakefile is ready ;-)
1359 makedepend: makedepend.SH config.sh
1362 runtests: runtests.SH config.sh
1365 .PHONY: test check test_prep test_prep_nodll test_prep_pre \
1366 test_prep_reonly test_tty test-tty test_notty test-notty \
1367 utest ucheck test.utf8 check.utf8 test.torture torturetest \
1368 test.utf16 check.utf16 utest.utf16 ucheck.utf16 \
1369 test.third check.third utest.third ucheck.third test_notty.third \
1370 test.deparse test_notty.deparse test_harness test_harness_notty \
1371 minitest coretest test.taintwarn test-reonly _test
1374 echo >&2 The _test target is deprecated. Please upgrade your smoker
1375 PERL=./perl $(RUN_TESTS) choose
1377 # Cannot delegate rebuilding of t/perl to make
1378 # to allow interlaced test and minitest
1380 # Architecture-neutral stuff:
1382 test_prep_pre: preplibrary utilities $(nonxs_ext)
1384 test_prep: test_prep_pre $(MINIPERL_EXE) $(unidatafiles) $(PERL_EXE) $(dynamic_ext) $(TEST_PERL_DLL) runtests
1385 cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE))
1387 test_prep_reonly: $(MINIPERL_EXE) $(PERL_EXE) $(dynamic_ext_re) $(TEST_PERL_DLL)
1388 $(MINIPERL) make_ext.pl $(dynamic_ext_re) MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
1389 cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE))
1391 test check: test_prep
1397 test_notty: test_prep
1400 utest ucheck test.utf8 check.utf8: test_prep
1401 TEST_ARGS=-utf8 $(RUN_TESTS) choose
1404 TEST_ARGS=-core $(RUN_TESTS) choose
1406 test-prep: test_prep
1410 test-notty: test_notty
1414 test.torture torturetest: test_prep
1415 TEST_ARGS=-torture $(RUN_TESTS) choose
1417 # Targets for UTF16 testing:
1419 minitest.utf16: minitest.prep
1420 - cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE)) \
1421 && $(RUN_PERL) TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
1423 test.utf16 check.utf16: test_prep
1424 TEST_ARGS=-utf16 $(RUN_TESTS) choose
1426 utest.utf16 ucheck.utf16: test_prep
1427 TEST_ARGS="-utf8 -utf16" $(RUN_TESTS) choose
1429 # Targets for valgrind testing:
1431 test_prep.valgrind: test_prep perl.valgrind
1433 test.valgrind check.valgrind: test_prep perl.valgrind.config
1434 PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(RUN_TESTS) choose
1436 utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config
1437 PERL_VALGRIND=1 TEST_ARGS=-utf8 $(RUN_TESTS) choose
1439 test_notty.valgrind: test_prep.valgrind perl.valgrind.config
1440 PERL_VALGRIND=1 $(RUN_TESTS) no-tty
1442 # Targets for Third Degree testing.
1444 test_prep.third: test_prep perl.third
1445 cd t && (rm -f ./perl.third$(EXE_EXT); $(LNS) ../perl.third$(EXE_EXT) perl.third(EXE_EXT))
1447 test.third check.third: test_prep.third perl.third
1448 PERL=./perl.third PERL_3LOG=1 $(RUN_TESTS) choose
1450 utest.third ucheck.third: test_prep.third perl.third
1451 PERL=./perl.third PERL_3LOG=1 TEST_ARGS=-utf8 $(RUN_TESTS) choose
1453 test_notty.third: test_prep.third perl.third
1454 PERL=./perl.third PERL_3LOG=1 $(RUN_TESTS) choose
1456 # Targets for Deparse testing.
1458 test.deparse: test_prep
1459 TEST_ARGS=-deparse $(RUN_TESTS) choose
1461 test_notty.deparse: test_prep
1462 TEST_ARGS=-deparse $(RUN_TESTS) no-tty
1464 # Targets to run the test suite with -t
1466 test.taintwarn: test_prep
1467 TEST_ARGS=-taintwarn $(RUN_TESTS) choose
1470 -@test -f lib/Config.pm || $(MAKE) lib/Config.pm $(unidatafiles)
1472 @echo "You may see some irrelevant test failures if you have been unable"
1473 @echo "to build lib/Config.pm, or the Unicode data files."
1476 # Can't depend on lib/Config.pm because that might be where miniperl
1478 minitest: $(MINIPERL_EXE) lib/re.pm minitest.prep
1479 - cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE)) \
1480 && $(RUN_PERL) TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t op/*.t uni/*.t </dev/tty
1484 test_harness: test_prep
1485 TESTFILE=harness $(RUN_TESTS) choose
1487 test_harness_notty: test_prep
1488 HARNESS_NOTTY=1 TESTFILE=harness $(RUN_TESTS) choose
1490 test-reonly: test_prep_reonly
1491 TEST_ARGS='-re \bre\/' TESTFILE=harness $(RUN_TESTS) choose
1494 # Porting tests (well-formedness of pod, manifest, etc)
1496 test_porting: test_prep
1497 cd t && $(RUN_PERL) harness porting/*.t
1499 # Handy way to run perlbug -ok without having to install and run the
1500 # installed perlbug. We don't re-run the tests here - we trust the user.
1501 # Please *don't* use this unless all tests pass.
1502 # If you want to report test failures, use "make nok" instead.
1504 .PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack
1507 $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)'
1510 $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok
1513 $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A
1515 okfilenack: utilities
1516 $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A
1519 $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)'
1522 $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok
1525 $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A
1527 nokfilenack: utilities
1528 $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
1530 .PHONY: clist hlist shlist pllist
1533 echo $(c) | tr ' ' $(TRNL) >.clist
1536 echo $(h) | tr ' ' $(TRNL) >.hlist
1539 echo $(sh) | tr ' ' $(TRNL) >.shlist
1542 echo $(pl) | tr ' ' $(TRNL) >.pllist
1544 Makefile: Makefile.SH ./config.sh
1545 $(SHELL) Makefile.SH
1549 perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
1554 ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c --exclude=perlmini.c *.c *.h
1556 # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
1557 # If this runs make out of memory, delete /usr/include lines.
1564 $ln Makefile ../Makefile
1567 $rm -f $firstmakefile
1569 # Now do any special processing required before building.
1574 echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2
1579 rm -f y.tab.c y.tab.h
1582 # we are using two different yaccs in BS2000 Posix!
1583 byacc a2p.y >/dev/null 2>&1
1586 yacc a2p.y >/dev/null 2>&1
1589 if cmp -s y.tab.c a2p.c
1593 echo "a2p.y -> a2p.c" >&2
1596 sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
1597 -e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \
1598 -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c
1601 # In case somebody yacc -d:ed the a2p.y.
1604 if cmp -s y.tab.h a2p.h
1608 echo "a2p.h -> a2p.h" >&2
1617 # Do nothing in VM/ESA.
1620 echo "'$osname' is an EBCDIC system I don't know that well." >&4
1624 '') echo "No parser files were regenerated. That's okay." >&2 ;;
1629 # ex: set ts=8 sts=4 sw=4 noet: