5 * One Ring to rule them all, One Ring to find them
7 * [p.v of _The Lord of the Rings_, opening poem]
8 * [p.50 of _The Lord of the Rings_, I/iii: "The Shadow of the Past"]
9 * [p.254 of _The Lord of the Rings_, II/ii: "The Council of Elrond"]
12 /* This file contains functions for executing a regular expression. See
13 * also regcomp.c which funnily enough, contains functions for compiling
14 * a regular expression.
16 * This file is also copied at build time to ext/re/re_exec.c, where
17 * it's built with -DPERL_EXT_RE_BUILD -DPERL_EXT_RE_DEBUG -DPERL_EXT.
18 * This causes the main functions to be compiled under new names and with
19 * debugging support added, which makes "use re 'debug'" work.
22 /* NOTE: this is derived from Henry Spencer's regexp code, and should not
23 * confused with the original package (see point 3 below). Thanks, Henry!
26 /* Additional note: this code is very heavily munged from Henry's version
27 * in places. In some spots I've traded clarity for efficiency, so don't
28 * blame Henry for some of the lack of readability.
31 /* The names of the functions have been changed from regcomp and
32 * regexec to pregcomp and pregexec in order to avoid conflicts
33 * with the POSIX routines of the same names.
36 #ifdef PERL_EXT_RE_BUILD
41 * pregcomp and pregexec -- regsub and regerror are not used in perl
43 * Copyright (c) 1986 by University of Toronto.
44 * Written by Henry Spencer. Not derived from licensed software.
46 * Permission is granted to anyone to use this software for any
47 * purpose on any computer system, and to redistribute it freely,
48 * subject to the following restrictions:
50 * 1. The author is not responsible for the consequences of use of
51 * this software, no matter how awful, even if they arise
54 * 2. The origin of this software must not be misrepresented, either
55 * by explicit claim or by omission.
57 * 3. Altered versions must be plainly marked as such, and must not
58 * be misrepresented as being the original software.
60 **** Alterations to Henry's code are...
62 **** Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
63 **** 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
64 **** by Larry Wall and others
66 **** You may distribute under the terms of either the GNU General Public
67 **** License or the Artistic License, as specified in the README file.
69 * Beware that some of this code is subtly aware of the way operator
70 * precedence is structured in regular expressions. Serious changes in
71 * regular-expression syntax might require a total rethink.
74 #define PERL_IN_REGEXEC_C
77 #ifdef PERL_IN_XSUB_RE
83 #include "invlist_inline.h"
84 #include "unicode_constants.h"
86 #define B_ON_NON_UTF8_LOCALE_IS_WRONG \
87 "Use of \\b{} or \\B{} for non-UTF-8 locale is wrong. Assuming a UTF-8 locale"
89 static const char utf8_locale_required[] =
90 "Use of (?[ ]) for non-UTF-8 locale is wrong. Assuming a UTF-8 locale";
93 /* At least one required character in the target string is expressible only in
95 static const char* const non_utf8_target_but_utf8_required
96 = "Can't match, because target string needs to be in UTF-8\n";
99 #define NON_UTF8_TARGET_BUT_UTF8_REQUIRED(target) STMT_START { \
100 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_ "%s", non_utf8_target_but_utf8_required));\
104 #define HAS_NONLATIN1_FOLD_CLOSURE(i) _HAS_NONLATIN1_FOLD_CLOSURE_ONLY_FOR_USE_BY_REGCOMP_DOT_C_AND_REGEXEC_DOT_C(i)
107 #define STATIC static
110 /* Valid only if 'c', the character being looke-up, is an invariant under
111 * UTF-8: it avoids the reginclass call if there are no complications: i.e., if
112 * everything matchable is straight forward in the bitmap */
113 #define REGINCLASS(prog,p,c,u) (ANYOF_FLAGS(p) \
114 ? reginclass(prog,p,c,c+1,u) \
115 : ANYOF_BITMAP_TEST(p,*(c)))
121 #define CHR_SVLEN(sv) (utf8_target ? sv_len_utf8(sv) : SvCUR(sv))
122 #define CHR_DIST(a,b) (reginfo->is_utf8_target ? utf8_distance(a,b) : a - b)
124 #define HOPc(pos,off) \
125 (char *)(reginfo->is_utf8_target \
126 ? reghop3((U8*)pos, off, \
127 (U8*)(off >= 0 ? reginfo->strend : reginfo->strbeg)) \
130 #define HOPBACKc(pos, off) \
131 (char*)(reginfo->is_utf8_target \
132 ? reghopmaybe3((U8*)pos, (SSize_t)0-off, (U8*)(reginfo->strbeg)) \
133 : (pos - off >= reginfo->strbeg) \
137 #define HOP3(pos,off,lim) (reginfo->is_utf8_target ? reghop3((U8*)(pos), off, (U8*)(lim)) : (U8*)(pos + off))
138 #define HOP3c(pos,off,lim) ((char*)HOP3(pos,off,lim))
140 /* lim must be +ve. Returns NULL on overshoot */
141 #define HOPMAYBE3(pos,off,lim) \
142 (reginfo->is_utf8_target \
143 ? reghopmaybe3((U8*)pos, off, (U8*)(lim)) \
144 : ((U8*)pos + off <= lim) \
148 /* like HOP3, but limits the result to <= lim even for the non-utf8 case.
149 * off must be >=0; args should be vars rather than expressions */
150 #define HOP3lim(pos,off,lim) (reginfo->is_utf8_target \
151 ? reghop3((U8*)(pos), off, (U8*)(lim)) \
152 : (U8*)((pos + off) > lim ? lim : (pos + off)))
154 #define HOP4(pos,off,llim, rlim) (reginfo->is_utf8_target \
155 ? reghop4((U8*)(pos), off, (U8*)(llim), (U8*)(rlim)) \
157 #define HOP4c(pos,off,llim, rlim) ((char*)HOP4(pos,off,llim, rlim))
159 #define NEXTCHR_EOS -10 /* nextchr has fallen off the end */
160 #define NEXTCHR_IS_EOS (nextchr < 0)
162 #define SET_nextchr \
163 nextchr = ((locinput < reginfo->strend) ? UCHARAT(locinput) : NEXTCHR_EOS)
165 #define SET_locinput(p) \
170 #define LOAD_UTF8_CHARCLASS(swash_ptr, property_name, invlist) STMT_START { \
172 U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST; \
173 swash_ptr = _core_swash_init("utf8", property_name, &PL_sv_undef, \
174 1, 0, invlist, &flags); \
179 /* If in debug mode, we test that a known character properly matches */
181 # define LOAD_UTF8_CHARCLASS_DEBUG_TEST(swash_ptr, \
184 utf8_char_in_property) \
185 LOAD_UTF8_CHARCLASS(swash_ptr, property_name, invlist); \
186 assert(swash_fetch(swash_ptr, (U8 *) utf8_char_in_property, TRUE));
188 # define LOAD_UTF8_CHARCLASS_DEBUG_TEST(swash_ptr, \
191 utf8_char_in_property) \
192 LOAD_UTF8_CHARCLASS(swash_ptr, property_name, invlist)
195 #define LOAD_UTF8_CHARCLASS_ALNUM() LOAD_UTF8_CHARCLASS_DEBUG_TEST( \
196 PL_utf8_swash_ptrs[_CC_WORDCHAR], \
198 PL_XPosix_ptrs[_CC_WORDCHAR], \
199 LATIN_SMALL_LIGATURE_LONG_S_T_UTF8);
201 #define PLACEHOLDER /* Something for the preprocessor to grab onto */
202 /* TODO: Combine JUMPABLE and HAS_TEXT to cache OP(rn) */
204 /* for use after a quantifier and before an EXACT-like node -- japhy */
205 /* it would be nice to rework regcomp.sym to generate this stuff. sigh
207 * NOTE that *nothing* that affects backtracking should be in here, specifically
208 * VERBS must NOT be included. JUMPABLE is used to determine if we can ignore a
209 * node that is in between two EXACT like nodes when ascertaining what the required
210 * "follow" character is. This should probably be moved to regex compile time
211 * although it may be done at run time beause of the REF possibility - more
212 * investigation required. -- demerphq
214 #define JUMPABLE(rn) ( \
216 (OP(rn) == CLOSE && \
217 !EVAL_CLOSE_PAREN_IS(cur_eval,ARG(rn)) ) || \
219 OP(rn) == SUSPEND || OP(rn) == IFMATCH || \
220 OP(rn) == PLUS || OP(rn) == MINMOD || \
222 (PL_regkind[OP(rn)] == CURLY && ARG1(rn) > 0) \
224 #define IS_EXACT(rn) (PL_regkind[OP(rn)] == EXACT)
226 #define HAS_TEXT(rn) ( IS_EXACT(rn) || PL_regkind[OP(rn)] == REF )
229 /* Currently these are only used when PL_regkind[OP(rn)] == EXACT so
230 we don't need this definition. XXX These are now out-of-sync*/
231 #define IS_TEXT(rn) ( OP(rn)==EXACT || OP(rn)==REF || OP(rn)==NREF )
232 #define IS_TEXTF(rn) ( OP(rn)==EXACTFU || OP(rn)==EXACTFU_SS || OP(rn)==EXACTFA || OP(rn)==EXACTFA_NO_TRIE || OP(rn)==EXACTF || OP(rn)==REFF || OP(rn)==NREFF )
233 #define IS_TEXTFL(rn) ( OP(rn)==EXACTFL || OP(rn)==REFFL || OP(rn)==NREFFL )
236 /* ... so we use this as its faster. */
237 #define IS_TEXT(rn) ( OP(rn)==EXACT || OP(rn)==EXACTL )
238 #define IS_TEXTFU(rn) ( OP(rn)==EXACTFU || OP(rn)==EXACTFLU8 || OP(rn)==EXACTFU_SS || OP(rn) == EXACTFA || OP(rn) == EXACTFA_NO_TRIE)
239 #define IS_TEXTF(rn) ( OP(rn)==EXACTF )
240 #define IS_TEXTFL(rn) ( OP(rn)==EXACTFL )
245 Search for mandatory following text node; for lookahead, the text must
246 follow but for lookbehind (rn->flags != 0) we skip to the next step.
248 #define FIND_NEXT_IMPT(rn) STMT_START { \
249 while (JUMPABLE(rn)) { \
250 const OPCODE type = OP(rn); \
251 if (type == SUSPEND || PL_regkind[type] == CURLY) \
252 rn = NEXTOPER(NEXTOPER(rn)); \
253 else if (type == PLUS) \
255 else if (type == IFMATCH) \
256 rn = (rn->flags == 0) ? NEXTOPER(NEXTOPER(rn)) : rn + ARG(rn); \
257 else rn += NEXT_OFF(rn); \
261 #define SLAB_FIRST(s) (&(s)->states[0])
262 #define SLAB_LAST(s) (&(s)->states[PERL_REGMATCH_SLAB_SLOTS-1])
264 static void S_setup_eval_state(pTHX_ regmatch_info *const reginfo);
265 static void S_cleanup_regmatch_info_aux(pTHX_ void *arg);
266 static regmatch_state * S_push_slab(pTHX);
268 #define REGCP_PAREN_ELEMS 3
269 #define REGCP_OTHER_ELEMS 3
270 #define REGCP_FRAME_ELEMS 1
271 /* REGCP_FRAME_ELEMS are not part of the REGCP_OTHER_ELEMS and
272 * are needed for the regexp context stack bookkeeping. */
275 S_regcppush(pTHX_ const regexp *rex, I32 parenfloor, U32 maxopenparen)
277 const int retval = PL_savestack_ix;
278 const int paren_elems_to_push =
279 (maxopenparen - parenfloor) * REGCP_PAREN_ELEMS;
280 const UV total_elems = paren_elems_to_push + REGCP_OTHER_ELEMS;
281 const UV elems_shifted = total_elems << SAVE_TIGHT_SHIFT;
283 GET_RE_DEBUG_FLAGS_DECL;
285 PERL_ARGS_ASSERT_REGCPPUSH;
287 if (paren_elems_to_push < 0)
288 Perl_croak(aTHX_ "panic: paren_elems_to_push, %i < 0, maxopenparen: %i parenfloor: %i REGCP_PAREN_ELEMS: %u",
289 (int)paren_elems_to_push, (int)maxopenparen,
290 (int)parenfloor, (unsigned)REGCP_PAREN_ELEMS);
292 if ((elems_shifted >> SAVE_TIGHT_SHIFT) != total_elems)
293 Perl_croak(aTHX_ "panic: paren_elems_to_push offset %"UVuf
294 " out of range (%lu-%ld)",
296 (unsigned long)maxopenparen,
299 SSGROW(total_elems + REGCP_FRAME_ELEMS);
302 if ((int)maxopenparen > (int)parenfloor)
303 Perl_re_printf( aTHX_
304 "rex=0x%"UVxf" offs=0x%"UVxf": saving capture indices:\n",
309 for (p = parenfloor+1; p <= (I32)maxopenparen; p++) {
310 /* REGCP_PARENS_ELEMS are pushed per pairs of parentheses. */
311 SSPUSHIV(rex->offs[p].end);
312 SSPUSHIV(rex->offs[p].start);
313 SSPUSHINT(rex->offs[p].start_tmp);
314 DEBUG_BUFFERS_r(Perl_re_printf( aTHX_
315 " \\%"UVuf": %"IVdf"(%"IVdf")..%"IVdf"\n",
317 (IV)rex->offs[p].start,
318 (IV)rex->offs[p].start_tmp,
322 /* REGCP_OTHER_ELEMS are pushed in any case, parentheses or no. */
323 SSPUSHINT(maxopenparen);
324 SSPUSHINT(rex->lastparen);
325 SSPUSHINT(rex->lastcloseparen);
326 SSPUSHUV(SAVEt_REGCONTEXT | elems_shifted); /* Magic cookie. */
331 /* These are needed since we do not localize EVAL nodes: */
332 #define REGCP_SET(cp) \
334 Perl_re_exec_indentf( aTHX_ \
335 "Setting an EVAL scope, savestack=%"IVdf",\n", \
336 depth, (IV)PL_savestack_ix \
341 #define REGCP_UNWIND(cp) \
343 if (cp != PL_savestack_ix) \
344 Perl_re_exec_indentf( aTHX_ \
345 "Clearing an EVAL scope, savestack=%"IVdf"..%"IVdf"\n",\
346 depth, (IV)(cp), (IV)PL_savestack_ix \
351 #define UNWIND_PAREN(lp, lcp) \
352 for (n = rex->lastparen; n > lp; n--) \
353 rex->offs[n].end = -1; \
354 rex->lastparen = n; \
355 rex->lastcloseparen = lcp;
359 S_regcppop(pTHX_ regexp *rex, U32 *maxopenparen_p)
363 GET_RE_DEBUG_FLAGS_DECL;
365 PERL_ARGS_ASSERT_REGCPPOP;
367 /* Pop REGCP_OTHER_ELEMS before the parentheses loop starts. */
369 assert((i & SAVE_MASK) == SAVEt_REGCONTEXT); /* Check that the magic cookie is there. */
370 i >>= SAVE_TIGHT_SHIFT; /* Parentheses elements to pop. */
371 rex->lastcloseparen = SSPOPINT;
372 rex->lastparen = SSPOPINT;
373 *maxopenparen_p = SSPOPINT;
375 i -= REGCP_OTHER_ELEMS;
376 /* Now restore the parentheses context. */
378 if (i || rex->lastparen + 1 <= rex->nparens)
379 Perl_re_printf( aTHX_
380 "rex=0x%"UVxf" offs=0x%"UVxf": restoring capture indices to:\n",
385 paren = *maxopenparen_p;
386 for ( ; i > 0; i -= REGCP_PAREN_ELEMS) {
388 rex->offs[paren].start_tmp = SSPOPINT;
389 rex->offs[paren].start = SSPOPIV;
391 if (paren <= rex->lastparen)
392 rex->offs[paren].end = tmps;
393 DEBUG_BUFFERS_r( Perl_re_printf( aTHX_
394 " \\%"UVuf": %"IVdf"(%"IVdf")..%"IVdf"%s\n",
396 (IV)rex->offs[paren].start,
397 (IV)rex->offs[paren].start_tmp,
398 (IV)rex->offs[paren].end,
399 (paren > rex->lastparen ? "(skipped)" : ""));
404 /* It would seem that the similar code in regtry()
405 * already takes care of this, and in fact it is in
406 * a better location to since this code can #if 0-ed out
407 * but the code in regtry() is needed or otherwise tests
408 * requiring null fields (pat.t#187 and split.t#{13,14}
409 * (as of patchlevel 7877) will fail. Then again,
410 * this code seems to be necessary or otherwise
411 * this erroneously leaves $1 defined: "1" =~ /^(?:(\d)x)?\d$/
412 * --jhi updated by dapm */
413 for (i = rex->lastparen + 1; i <= rex->nparens; i++) {
414 if (i > *maxopenparen_p)
415 rex->offs[i].start = -1;
416 rex->offs[i].end = -1;
417 DEBUG_BUFFERS_r( Perl_re_printf( aTHX_
418 " \\%"UVuf": %s ..-1 undeffing\n",
420 (i > *maxopenparen_p) ? "-1" : " "
426 /* restore the parens and associated vars at savestack position ix,
427 * but without popping the stack */
430 S_regcp_restore(pTHX_ regexp *rex, I32 ix, U32 *maxopenparen_p)
432 I32 tmpix = PL_savestack_ix;
433 PL_savestack_ix = ix;
434 regcppop(rex, maxopenparen_p);
435 PL_savestack_ix = tmpix;
438 #define regcpblow(cp) LEAVE_SCOPE(cp) /* Ignores regcppush()ed data. */
441 S_isFOO_lc(pTHX_ const U8 classnum, const U8 character)
443 /* Returns a boolean as to whether or not 'character' is a member of the
444 * Posix character class given by 'classnum' that should be equivalent to a
445 * value in the typedef '_char_class_number'.
447 * Ideally this could be replaced by a just an array of function pointers
448 * to the C library functions that implement the macros this calls.
449 * However, to compile, the precise function signatures are required, and
450 * these may vary from platform to to platform. To avoid having to figure
451 * out what those all are on each platform, I (khw) am using this method,
452 * which adds an extra layer of function call overhead (unless the C
453 * optimizer strips it away). But we don't particularly care about
454 * performance with locales anyway. */
456 switch ((_char_class_number) classnum) {
457 case _CC_ENUM_ALPHANUMERIC: return isALPHANUMERIC_LC(character);
458 case _CC_ENUM_ALPHA: return isALPHA_LC(character);
459 case _CC_ENUM_ASCII: return isASCII_LC(character);
460 case _CC_ENUM_BLANK: return isBLANK_LC(character);
461 case _CC_ENUM_CASED: return isLOWER_LC(character)
462 || isUPPER_LC(character);
463 case _CC_ENUM_CNTRL: return isCNTRL_LC(character);
464 case _CC_ENUM_DIGIT: return isDIGIT_LC(character);
465 case _CC_ENUM_GRAPH: return isGRAPH_LC(character);
466 case _CC_ENUM_LOWER: return isLOWER_LC(character);
467 case _CC_ENUM_PRINT: return isPRINT_LC(character);
468 case _CC_ENUM_PUNCT: return isPUNCT_LC(character);
469 case _CC_ENUM_SPACE: return isSPACE_LC(character);
470 case _CC_ENUM_UPPER: return isUPPER_LC(character);
471 case _CC_ENUM_WORDCHAR: return isWORDCHAR_LC(character);
472 case _CC_ENUM_XDIGIT: return isXDIGIT_LC(character);
473 default: /* VERTSPACE should never occur in locales */
474 Perl_croak(aTHX_ "panic: isFOO_lc() has an unexpected character class '%d'", classnum);
477 NOT_REACHED; /* NOTREACHED */
482 S_isFOO_utf8_lc(pTHX_ const U8 classnum, const U8* character)
484 /* Returns a boolean as to whether or not the (well-formed) UTF-8-encoded
485 * 'character' is a member of the Posix character class given by 'classnum'
486 * that should be equivalent to a value in the typedef
487 * '_char_class_number'.
489 * This just calls isFOO_lc on the code point for the character if it is in
490 * the range 0-255. Outside that range, all characters use Unicode
491 * rules, ignoring any locale. So use the Unicode function if this class
492 * requires a swash, and use the Unicode macro otherwise. */
494 PERL_ARGS_ASSERT_ISFOO_UTF8_LC;
496 if (UTF8_IS_INVARIANT(*character)) {
497 return isFOO_lc(classnum, *character);
499 else if (UTF8_IS_DOWNGRADEABLE_START(*character)) {
500 return isFOO_lc(classnum,
501 EIGHT_BIT_UTF8_TO_NATIVE(*character, *(character + 1)));
504 _CHECK_AND_OUTPUT_WIDE_LOCALE_UTF8_MSG(character, character + UTF8SKIP(character));
506 if (classnum < _FIRST_NON_SWASH_CC) {
508 /* Initialize the swash unless done already */
509 if (! PL_utf8_swash_ptrs[classnum]) {
510 U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
511 PL_utf8_swash_ptrs[classnum] =
512 _core_swash_init("utf8",
515 PL_XPosix_ptrs[classnum], &flags);
518 return cBOOL(swash_fetch(PL_utf8_swash_ptrs[classnum], (U8 *)
520 TRUE /* is UTF */ ));
523 switch ((_char_class_number) classnum) {
524 case _CC_ENUM_SPACE: return is_XPERLSPACE_high(character);
525 case _CC_ENUM_BLANK: return is_HORIZWS_high(character);
526 case _CC_ENUM_XDIGIT: return is_XDIGIT_high(character);
527 case _CC_ENUM_VERTSPACE: return is_VERTWS_high(character);
531 return FALSE; /* Things like CNTRL are always below 256 */
535 * pregexec and friends
538 #ifndef PERL_IN_XSUB_RE
540 - pregexec - match a regexp against a string
543 Perl_pregexec(pTHX_ REGEXP * const prog, char* stringarg, char *strend,
544 char *strbeg, SSize_t minend, SV *screamer, U32 nosave)
545 /* stringarg: the point in the string at which to begin matching */
546 /* strend: pointer to null at end of string */
547 /* strbeg: real beginning of string */
548 /* minend: end of match must be >= minend bytes after stringarg. */
549 /* screamer: SV being matched: only used for utf8 flag, pos() etc; string
550 * itself is accessed via the pointers above */
551 /* nosave: For optimizations. */
553 PERL_ARGS_ASSERT_PREGEXEC;
556 regexec_flags(prog, stringarg, strend, strbeg, minend, screamer, NULL,
557 nosave ? 0 : REXEC_COPY_STR);
563 /* re_intuit_start():
565 * Based on some optimiser hints, try to find the earliest position in the
566 * string where the regex could match.
568 * rx: the regex to match against
569 * sv: the SV being matched: only used for utf8 flag; the string
570 * itself is accessed via the pointers below. Note that on
571 * something like an overloaded SV, SvPOK(sv) may be false
572 * and the string pointers may point to something unrelated to
574 * strbeg: real beginning of string
575 * strpos: the point in the string at which to begin matching
576 * strend: pointer to the byte following the last char of the string
577 * flags currently unused; set to 0
578 * data: currently unused; set to NULL
580 * The basic idea of re_intuit_start() is to use some known information
581 * about the pattern, namely:
583 * a) the longest known anchored substring (i.e. one that's at a
584 * constant offset from the beginning of the pattern; but not
585 * necessarily at a fixed offset from the beginning of the
587 * b) the longest floating substring (i.e. one that's not at a constant
588 * offset from the beginning of the pattern);
589 * c) Whether the pattern is anchored to the string; either
590 * an absolute anchor: /^../, or anchored to \n: /^.../m,
591 * or anchored to pos(): /\G/;
592 * d) A start class: a real or synthetic character class which
593 * represents which characters are legal at the start of the pattern;
595 * to either quickly reject the match, or to find the earliest position
596 * within the string at which the pattern might match, thus avoiding
597 * running the full NFA engine at those earlier locations, only to
598 * eventually fail and retry further along.
600 * Returns NULL if the pattern can't match, or returns the address within
601 * the string which is the earliest place the match could occur.
603 * The longest of the anchored and floating substrings is called 'check'
604 * and is checked first. The other is called 'other' and is checked
605 * second. The 'other' substring may not be present. For example,
607 * /(abc|xyz)ABC\d{0,3}DEFG/
611 * check substr (float) = "DEFG", offset 6..9 chars
612 * other substr (anchored) = "ABC", offset 3..3 chars
615 * Be aware that during the course of this function, sometimes 'anchored'
616 * refers to a substring being anchored relative to the start of the
617 * pattern, and sometimes to the pattern itself being anchored relative to
618 * the string. For example:
620 * /\dabc/: "abc" is anchored to the pattern;
621 * /^\dabc/: "abc" is anchored to the pattern and the string;
622 * /\d+abc/: "abc" is anchored to neither the pattern nor the string;
623 * /^\d+abc/: "abc" is anchored to neither the pattern nor the string,
624 * but the pattern is anchored to the string.
628 Perl_re_intuit_start(pTHX_
631 const char * const strbeg,
635 re_scream_pos_data *data)
637 struct regexp *const prog = ReANY(rx);
638 SSize_t start_shift = prog->check_offset_min;
639 /* Should be nonnegative! */
640 SSize_t end_shift = 0;
641 /* current lowest pos in string where the regex can start matching */
642 char *rx_origin = strpos;
644 const bool utf8_target = (sv && SvUTF8(sv)) ? 1 : 0; /* if no sv we have to assume bytes */
645 U8 other_ix = 1 - prog->substrs->check_ix;
647 char *other_last = strpos;/* latest pos 'other' substr already checked to */
648 char *check_at = NULL; /* check substr found at this pos */
649 const I32 multiline = prog->extflags & RXf_PMf_MULTILINE;
650 RXi_GET_DECL(prog,progi);
651 regmatch_info reginfo_buf; /* create some info to pass to find_byclass */
652 regmatch_info *const reginfo = ®info_buf;
653 GET_RE_DEBUG_FLAGS_DECL;
655 PERL_ARGS_ASSERT_RE_INTUIT_START;
656 PERL_UNUSED_ARG(flags);
657 PERL_UNUSED_ARG(data);
659 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
660 "Intuit: trying to determine minimum start position...\n"));
662 /* for now, assume that all substr offsets are positive. If at some point
663 * in the future someone wants to do clever things with lookbehind and
664 * -ve offsets, they'll need to fix up any code in this function
665 * which uses these offsets. See the thread beginning
666 * <20140113145929.GF27210@iabyn.com>
668 assert(prog->substrs->data[0].min_offset >= 0);
669 assert(prog->substrs->data[0].max_offset >= 0);
670 assert(prog->substrs->data[1].min_offset >= 0);
671 assert(prog->substrs->data[1].max_offset >= 0);
672 assert(prog->substrs->data[2].min_offset >= 0);
673 assert(prog->substrs->data[2].max_offset >= 0);
675 /* for now, assume that if both present, that the floating substring
676 * doesn't start before the anchored substring.
677 * If you break this assumption (e.g. doing better optimisations
678 * with lookahead/behind), then you'll need to audit the code in this
679 * function carefully first
682 ! ( (prog->anchored_utf8 || prog->anchored_substr)
683 && (prog->float_utf8 || prog->float_substr))
684 || (prog->float_min_offset >= prog->anchored_offset));
686 /* byte rather than char calculation for efficiency. It fails
687 * to quickly reject some cases that can't match, but will reject
688 * them later after doing full char arithmetic */
689 if (prog->minlen > strend - strpos) {
690 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
691 " String too short...\n"));
695 RX_MATCH_UTF8_set(rx,utf8_target);
696 reginfo->is_utf8_target = cBOOL(utf8_target);
697 reginfo->info_aux = NULL;
698 reginfo->strbeg = strbeg;
699 reginfo->strend = strend;
700 reginfo->is_utf8_pat = cBOOL(RX_UTF8(rx));
702 /* not actually used within intuit, but zero for safety anyway */
703 reginfo->poscache_maxiter = 0;
706 if (!prog->check_utf8 && prog->check_substr)
707 to_utf8_substr(prog);
708 check = prog->check_utf8;
710 if (!prog->check_substr && prog->check_utf8) {
711 if (! to_byte_substr(prog)) {
712 NON_UTF8_TARGET_BUT_UTF8_REQUIRED(fail);
715 check = prog->check_substr;
718 /* dump the various substring data */
719 DEBUG_OPTIMISE_MORE_r({
721 for (i=0; i<=2; i++) {
722 SV *sv = (utf8_target ? prog->substrs->data[i].utf8_substr
723 : prog->substrs->data[i].substr);
727 Perl_re_printf( aTHX_
728 " substrs[%d]: min=%"IVdf" max=%"IVdf" end shift=%"IVdf
729 " useful=%"IVdf" utf8=%d [%s]\n",
731 (IV)prog->substrs->data[i].min_offset,
732 (IV)prog->substrs->data[i].max_offset,
733 (IV)prog->substrs->data[i].end_shift,
740 if (prog->intflags & PREGf_ANCH) { /* Match at \G, beg-of-str or after \n */
742 /* ml_anch: check after \n?
744 * A note about PREGf_IMPLICIT: on an un-anchored pattern beginning
745 * with /.*.../, these flags will have been added by the
747 * /.*abc/, /.*abc/m: PREGf_IMPLICIT | PREGf_ANCH_MBOL
748 * /.*abc/s: PREGf_IMPLICIT | PREGf_ANCH_SBOL
750 ml_anch = (prog->intflags & PREGf_ANCH_MBOL)
751 && !(prog->intflags & PREGf_IMPLICIT);
753 if (!ml_anch && !(prog->intflags & PREGf_IMPLICIT)) {
754 /* we are only allowed to match at BOS or \G */
756 /* trivially reject if there's a BOS anchor and we're not at BOS.
758 * Note that we don't try to do a similar quick reject for
759 * \G, since generally the caller will have calculated strpos
760 * based on pos() and gofs, so the string is already correctly
761 * anchored by definition; and handling the exceptions would
762 * be too fiddly (e.g. REXEC_IGNOREPOS).
764 if ( strpos != strbeg
765 && (prog->intflags & PREGf_ANCH_SBOL))
767 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
768 " Not at start...\n"));
772 /* in the presence of an anchor, the anchored (relative to the
773 * start of the regex) substr must also be anchored relative
774 * to strpos. So quickly reject if substr isn't found there.
775 * This works for \G too, because the caller will already have
776 * subtracted gofs from pos, and gofs is the offset from the
777 * \G to the start of the regex. For example, in /.abc\Gdef/,
778 * where substr="abcdef", pos()=3, gofs=4, offset_min=1:
779 * caller will have set strpos=pos()-4; we look for the substr
780 * at position pos()-4+1, which lines up with the "a" */
782 if (prog->check_offset_min == prog->check_offset_max) {
783 /* Substring at constant offset from beg-of-str... */
784 SSize_t slen = SvCUR(check);
785 char *s = HOP3c(strpos, prog->check_offset_min, strend);
787 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
788 " Looking for check substr at fixed offset %"IVdf"...\n",
789 (IV)prog->check_offset_min));
792 /* In this case, the regex is anchored at the end too.
793 * Unless it's a multiline match, the lengths must match
794 * exactly, give or take a \n. NB: slen >= 1 since
795 * the last char of check is \n */
797 && ( strend - s > slen
798 || strend - s < slen - 1
799 || (strend - s == slen && strend[-1] != '\n')))
801 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
802 " String too long...\n"));
805 /* Now should match s[0..slen-2] */
808 if (slen && (*SvPVX_const(check) != *s
809 || (slen > 1 && memNE(SvPVX_const(check), s, slen))))
811 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
812 " String not equal...\n"));
817 goto success_at_start;
822 end_shift = prog->check_end_shift;
824 #ifdef DEBUGGING /* 7/99: reports of failure (with the older version) */
826 Perl_croak(aTHX_ "panic: end_shift: %"IVdf" pattern:\n%s\n ",
827 (IV)end_shift, RX_PRECOMP(prog));
832 /* This is the (re)entry point of the main loop in this function.
833 * The goal of this loop is to:
834 * 1) find the "check" substring in the region rx_origin..strend
835 * (adjusted by start_shift / end_shift). If not found, reject
837 * 2) If it exists, look for the "other" substr too if defined; for
838 * example, if the check substr maps to the anchored substr, then
839 * check the floating substr, and vice-versa. If not found, go
840 * back to (1) with rx_origin suitably incremented.
841 * 3) If we find an rx_origin position that doesn't contradict
842 * either of the substrings, then check the possible additional
843 * constraints on rx_origin of /^.../m or a known start class.
844 * If these fail, then depending on which constraints fail, jump
845 * back to here, or to various other re-entry points further along
846 * that skip some of the first steps.
847 * 4) If we pass all those tests, update the BmUSEFUL() count on the
848 * substring. If the start position was determined to be at the
849 * beginning of the string - so, not rejected, but not optimised,
850 * since we have to run regmatch from position 0 - decrement the
851 * BmUSEFUL() count. Otherwise increment it.
855 /* first, look for the 'check' substring */
861 DEBUG_OPTIMISE_MORE_r({
862 Perl_re_printf( aTHX_
863 " At restart: rx_origin=%"IVdf" Check offset min: %"IVdf
864 " Start shift: %"IVdf" End shift %"IVdf
865 " Real end Shift: %"IVdf"\n",
866 (IV)(rx_origin - strbeg),
867 (IV)prog->check_offset_min,
870 (IV)prog->check_end_shift);
873 end_point = HOP3(strend, -end_shift, strbeg);
874 start_point = HOPMAYBE3(rx_origin, start_shift, end_point);
879 /* If the regex is absolutely anchored to either the start of the
880 * string (SBOL) or to pos() (ANCH_GPOS), then
881 * check_offset_max represents an upper bound on the string where
882 * the substr could start. For the ANCH_GPOS case, we assume that
883 * the caller of intuit will have already set strpos to
884 * pos()-gofs, so in this case strpos + offset_max will still be
885 * an upper bound on the substr.
888 && prog->intflags & PREGf_ANCH
889 && prog->check_offset_max != SSize_t_MAX)
891 SSize_t len = SvCUR(check) - !!SvTAIL(check);
892 const char * const anchor =
893 (prog->intflags & PREGf_ANCH_GPOS ? strpos : strbeg);
895 /* do a bytes rather than chars comparison. It's conservative;
896 * so it skips doing the HOP if the result can't possibly end
897 * up earlier than the old value of end_point.
899 if ((char*)end_point - anchor > prog->check_offset_max) {
900 end_point = HOP3lim((U8*)anchor,
901 prog->check_offset_max,
907 check_at = fbm_instr( start_point, end_point,
908 check, multiline ? FBMrf_MULTILINE : 0);
910 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
911 " doing 'check' fbm scan, [%"IVdf"..%"IVdf"] gave %"IVdf"\n",
912 (IV)((char*)start_point - strbeg),
913 (IV)((char*)end_point - strbeg),
914 (IV)(check_at ? check_at - strbeg : -1)
917 /* Update the count-of-usability, remove useless subpatterns,
921 RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
922 SvPVX_const(check), RE_SV_DUMPLEN(check), 30);
923 Perl_re_printf( aTHX_ " %s %s substr %s%s%s",
924 (check_at ? "Found" : "Did not find"),
925 (check == (utf8_target ? prog->anchored_utf8 : prog->anchored_substr)
926 ? "anchored" : "floating"),
929 (check_at ? " at offset " : "...\n") );
934 /* set rx_origin to the minimum position where the regex could start
935 * matching, given the constraint of the just-matched check substring.
936 * But don't set it lower than previously.
939 if (check_at - rx_origin > prog->check_offset_max)
940 rx_origin = HOP3c(check_at, -prog->check_offset_max, rx_origin);
941 /* Finish the diagnostic message */
942 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
943 "%ld (rx_origin now %"IVdf")...\n",
944 (long)(check_at - strbeg),
945 (IV)(rx_origin - strbeg)
950 /* now look for the 'other' substring if defined */
952 if (utf8_target ? prog->substrs->data[other_ix].utf8_substr
953 : prog->substrs->data[other_ix].substr)
955 /* Take into account the "other" substring. */
959 struct reg_substr_datum *other;
962 other = &prog->substrs->data[other_ix];
964 /* if "other" is anchored:
965 * we've previously found a floating substr starting at check_at.
966 * This means that the regex origin must lie somewhere
967 * between min (rx_origin): HOP3(check_at, -check_offset_max)
968 * and max: HOP3(check_at, -check_offset_min)
969 * (except that min will be >= strpos)
970 * So the fixed substr must lie somewhere between
971 * HOP3(min, anchored_offset)
972 * HOP3(max, anchored_offset) + SvCUR(substr)
975 /* if "other" is floating
976 * Calculate last1, the absolute latest point where the
977 * floating substr could start in the string, ignoring any
978 * constraints from the earlier fixed match. It is calculated
981 * strend - prog->minlen (in chars) is the absolute latest
982 * position within the string where the origin of the regex
983 * could appear. The latest start point for the floating
984 * substr is float_min_offset(*) on from the start of the
985 * regex. last1 simply combines thee two offsets.
987 * (*) You might think the latest start point should be
988 * float_max_offset from the regex origin, and technically
989 * you'd be correct. However, consider
991 * Here, float min, max are 3,5 and minlen is 7.
992 * This can match either
996 * In the first case, the regex matches minlen chars; in the
997 * second, minlen+1, in the third, minlen+2.
998 * In the first case, the floating offset is 3 (which equals
999 * float_min), in the second, 4, and in the third, 5 (which
1000 * equals float_max). In all cases, the floating string bcd
1001 * can never start more than 4 chars from the end of the
1002 * string, which equals minlen - float_min. As the substring
1003 * starts to match more than float_min from the start of the
1004 * regex, it makes the regex match more than minlen chars,
1005 * and the two cancel each other out. So we can always use
1006 * float_min - minlen, rather than float_max - minlen for the
1007 * latest position in the string.
1009 * Note that -minlen + float_min_offset is equivalent (AFAIKT)
1010 * to CHR_SVLEN(must) - !!SvTAIL(must) + prog->float_end_shift
1013 assert(prog->minlen >= other->min_offset);
1014 last1 = HOP3c(strend,
1015 other->min_offset - prog->minlen, strbeg);
1017 if (other_ix) {/* i.e. if (other-is-float) */
1018 /* last is the latest point where the floating substr could
1019 * start, *given* any constraints from the earlier fixed
1020 * match. This constraint is that the floating string starts
1021 * <= float_max_offset chars from the regex origin (rx_origin).
1022 * If this value is less than last1, use it instead.
1024 assert(rx_origin <= last1);
1026 /* this condition handles the offset==infinity case, and
1027 * is a short-cut otherwise. Although it's comparing a
1028 * byte offset to a char length, it does so in a safe way,
1029 * since 1 char always occupies 1 or more bytes,
1030 * so if a string range is (last1 - rx_origin) bytes,
1031 * it will be less than or equal to (last1 - rx_origin)
1032 * chars; meaning it errs towards doing the accurate HOP3
1033 * rather than just using last1 as a short-cut */
1034 (last1 - rx_origin) < other->max_offset
1036 : (char*)HOP3lim(rx_origin, other->max_offset, last1);
1039 assert(strpos + start_shift <= check_at);
1040 last = HOP4c(check_at, other->min_offset - start_shift,
1044 s = HOP3c(rx_origin, other->min_offset, strend);
1045 if (s < other_last) /* These positions already checked */
1048 must = utf8_target ? other->utf8_substr : other->substr;
1049 assert(SvPOK(must));
1052 char *to = last + SvCUR(must) - (SvTAIL(must)!=0);
1056 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1057 " skipping 'other' fbm scan: %"IVdf" > %"IVdf"\n",
1058 (IV)(from - strbeg),
1064 (unsigned char*)from,
1067 multiline ? FBMrf_MULTILINE : 0
1069 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1070 " doing 'other' fbm scan, [%"IVdf"..%"IVdf"] gave %"IVdf"\n",
1071 (IV)(from - strbeg),
1073 (IV)(s ? s - strbeg : -1)
1079 RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
1080 SvPVX_const(must), RE_SV_DUMPLEN(must), 30);
1081 Perl_re_printf( aTHX_ " %s %s substr %s%s",
1082 s ? "Found" : "Contradicts",
1083 other_ix ? "floating" : "anchored",
1084 quoted, RE_SV_TAIL(must));
1089 /* last1 is latest possible substr location. If we didn't
1090 * find it before there, we never will */
1091 if (last >= last1) {
1092 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1093 "; giving up...\n"));
1097 /* try to find the check substr again at a later
1098 * position. Maybe next time we'll find the "other" substr
1100 other_last = HOP3c(last, 1, strend) /* highest failure */;
1102 other_ix /* i.e. if other-is-float */
1103 ? HOP3c(rx_origin, 1, strend)
1104 : HOP4c(last, 1 - other->min_offset, strbeg, strend);
1105 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1106 "; about to retry %s at offset %ld (rx_origin now %"IVdf")...\n",
1107 (other_ix ? "floating" : "anchored"),
1108 (long)(HOP3c(check_at, 1, strend) - strbeg),
1109 (IV)(rx_origin - strbeg)
1114 if (other_ix) { /* if (other-is-float) */
1115 /* other_last is set to s, not s+1, since its possible for
1116 * a floating substr to fail first time, then succeed
1117 * second time at the same floating position; e.g.:
1118 * "-AB--AABZ" =~ /\wAB\d*Z/
1119 * The first time round, anchored and float match at
1120 * "-(AB)--AAB(Z)" then fail on the initial \w character
1121 * class. Second time round, they match at "-AB--A(AB)(Z)".
1126 rx_origin = HOP3c(s, -other->min_offset, strbeg);
1127 other_last = HOP3c(s, 1, strend);
1129 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1130 " at offset %ld (rx_origin now %"IVdf")...\n",
1132 (IV)(rx_origin - strbeg)
1138 DEBUG_OPTIMISE_MORE_r(
1139 Perl_re_printf( aTHX_
1140 " Check-only match: offset min:%"IVdf" max:%"IVdf
1141 " check_at:%"IVdf" rx_origin:%"IVdf" rx_origin-check_at:%"IVdf
1142 " strend:%"IVdf"\n",
1143 (IV)prog->check_offset_min,
1144 (IV)prog->check_offset_max,
1145 (IV)(check_at-strbeg),
1146 (IV)(rx_origin-strbeg),
1147 (IV)(rx_origin-check_at),
1153 postprocess_substr_matches:
1155 /* handle the extra constraint of /^.../m if present */
1157 if (ml_anch && rx_origin != strbeg && rx_origin[-1] != '\n') {
1160 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1161 " looking for /^/m anchor"));
1163 /* we have failed the constraint of a \n before rx_origin.
1164 * Find the next \n, if any, even if it's beyond the current
1165 * anchored and/or floating substrings. Whether we should be
1166 * scanning ahead for the next \n or the next substr is debatable.
1167 * On the one hand you'd expect rare substrings to appear less
1168 * often than \n's. On the other hand, searching for \n means
1169 * we're effectively flipping between check_substr and "\n" on each
1170 * iteration as the current "rarest" string candidate, which
1171 * means for example that we'll quickly reject the whole string if
1172 * hasn't got a \n, rather than trying every substr position
1176 s = HOP3c(strend, - prog->minlen, strpos);
1177 if (s <= rx_origin ||
1178 ! ( rx_origin = (char *)memchr(rx_origin, '\n', s - rx_origin)))
1180 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1181 " Did not find /%s^%s/m...\n",
1182 PL_colors[0], PL_colors[1]));
1186 /* earliest possible origin is 1 char after the \n.
1187 * (since *rx_origin == '\n', it's safe to ++ here rather than
1188 * HOP(rx_origin, 1)) */
1191 if (prog->substrs->check_ix == 0 /* check is anchored */
1192 || rx_origin >= HOP3c(check_at, - prog->check_offset_min, strpos))
1194 /* Position contradicts check-string; either because
1195 * check was anchored (and thus has no wiggle room),
1196 * or check was float and rx_origin is above the float range */
1197 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1198 " Found /%s^%s/m, about to restart lookup for check-string with rx_origin %ld...\n",
1199 PL_colors[0], PL_colors[1], (long)(rx_origin - strbeg)));
1203 /* if we get here, the check substr must have been float,
1204 * is in range, and we may or may not have had an anchored
1205 * "other" substr which still contradicts */
1206 assert(prog->substrs->check_ix); /* check is float */
1208 if (utf8_target ? prog->anchored_utf8 : prog->anchored_substr) {
1209 /* whoops, the anchored "other" substr exists, so we still
1210 * contradict. On the other hand, the float "check" substr
1211 * didn't contradict, so just retry the anchored "other"
1213 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1214 " Found /%s^%s/m, rescanning for anchored from offset %"IVdf" (rx_origin now %"IVdf")...\n",
1215 PL_colors[0], PL_colors[1],
1216 (IV)(rx_origin - strbeg + prog->anchored_offset),
1217 (IV)(rx_origin - strbeg)
1219 goto do_other_substr;
1222 /* success: we don't contradict the found floating substring
1223 * (and there's no anchored substr). */
1224 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1225 " Found /%s^%s/m with rx_origin %ld...\n",
1226 PL_colors[0], PL_colors[1], (long)(rx_origin - strbeg)));
1229 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1230 " (multiline anchor test skipped)\n"));
1236 /* if we have a starting character class, then test that extra constraint.
1237 * (trie stclasses are too expensive to use here, we are better off to
1238 * leave it to regmatch itself) */
1240 if (progi->regstclass && PL_regkind[OP(progi->regstclass)]!=TRIE) {
1241 const U8* const str = (U8*)STRING(progi->regstclass);
1243 /* XXX this value could be pre-computed */
1244 const int cl_l = (PL_regkind[OP(progi->regstclass)] == EXACT
1245 ? (reginfo->is_utf8_pat
1246 ? utf8_distance(str + STR_LEN(progi->regstclass), str)
1247 : STR_LEN(progi->regstclass))
1251 /* latest pos that a matching float substr constrains rx start to */
1252 char *rx_max_float = NULL;
1254 /* if the current rx_origin is anchored, either by satisfying an
1255 * anchored substring constraint, or a /^.../m constraint, then we
1256 * can reject the current origin if the start class isn't found
1257 * at the current position. If we have a float-only match, then
1258 * rx_origin is constrained to a range; so look for the start class
1259 * in that range. if neither, then look for the start class in the
1260 * whole rest of the string */
1262 /* XXX DAPM it's not clear what the minlen test is for, and why
1263 * it's not used in the floating case. Nothing in the test suite
1264 * causes minlen == 0 here. See <20140313134639.GS12844@iabyn.com>.
1265 * Here are some old comments, which may or may not be correct:
1267 * minlen == 0 is possible if regstclass is \b or \B,
1268 * and the fixed substr is ''$.
1269 * Since minlen is already taken into account, rx_origin+1 is
1270 * before strend; accidentally, minlen >= 1 guaranties no false
1271 * positives at rx_origin + 1 even for \b or \B. But (minlen? 1 :
1272 * 0) below assumes that regstclass does not come from lookahead...
1273 * If regstclass takes bytelength more than 1: If charlength==1, OK.
1274 * This leaves EXACTF-ish only, which are dealt with in
1278 if (prog->anchored_substr || prog->anchored_utf8 || ml_anch)
1279 endpos= HOP3c(rx_origin, (prog->minlen ? cl_l : 0), strend);
1280 else if (prog->float_substr || prog->float_utf8) {
1281 rx_max_float = HOP3c(check_at, -start_shift, strbeg);
1282 endpos= HOP3c(rx_max_float, cl_l, strend);
1287 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1288 " looking for class: start_shift: %"IVdf" check_at: %"IVdf
1289 " rx_origin: %"IVdf" endpos: %"IVdf"\n",
1290 (IV)start_shift, (IV)(check_at - strbeg),
1291 (IV)(rx_origin - strbeg), (IV)(endpos - strbeg)));
1293 s = find_byclass(prog, progi->regstclass, rx_origin, endpos,
1296 if (endpos == strend) {
1297 DEBUG_EXECUTE_r( Perl_re_printf( aTHX_
1298 " Could not match STCLASS...\n") );
1301 DEBUG_EXECUTE_r( Perl_re_printf( aTHX_
1302 " This position contradicts STCLASS...\n") );
1303 if ((prog->intflags & PREGf_ANCH) && !ml_anch
1304 && !(prog->intflags & PREGf_IMPLICIT))
1307 /* Contradict one of substrings */
1308 if (prog->anchored_substr || prog->anchored_utf8) {
1309 if (prog->substrs->check_ix == 1) { /* check is float */
1310 /* Have both, check_string is floating */
1311 assert(rx_origin + start_shift <= check_at);
1312 if (rx_origin + start_shift != check_at) {
1313 /* not at latest position float substr could match:
1314 * Recheck anchored substring, but not floating.
1315 * The condition above is in bytes rather than
1316 * chars for efficiency. It's conservative, in
1317 * that it errs on the side of doing 'goto
1318 * do_other_substr'. In this case, at worst,
1319 * an extra anchored search may get done, but in
1320 * practice the extra fbm_instr() is likely to
1321 * get skipped anyway. */
1322 DEBUG_EXECUTE_r( Perl_re_printf( aTHX_
1323 " about to retry anchored at offset %ld (rx_origin now %"IVdf")...\n",
1324 (long)(other_last - strbeg),
1325 (IV)(rx_origin - strbeg)
1327 goto do_other_substr;
1335 /* In the presence of ml_anch, we might be able to
1336 * find another \n without breaking the current float
1339 /* strictly speaking this should be HOP3c(..., 1, ...),
1340 * but since we goto a block of code that's going to
1341 * search for the next \n if any, its safe here */
1343 DEBUG_EXECUTE_r( Perl_re_printf( aTHX_
1344 " about to look for /%s^%s/m starting at rx_origin %ld...\n",
1345 PL_colors[0], PL_colors[1],
1346 (long)(rx_origin - strbeg)) );
1347 goto postprocess_substr_matches;
1350 /* strictly speaking this can never be true; but might
1351 * be if we ever allow intuit without substrings */
1352 if (!(utf8_target ? prog->float_utf8 : prog->float_substr))
1355 rx_origin = rx_max_float;
1358 /* at this point, any matching substrings have been
1359 * contradicted. Start again... */
1361 rx_origin = HOP3c(rx_origin, 1, strend);
1363 /* uses bytes rather than char calculations for efficiency.
1364 * It's conservative: it errs on the side of doing 'goto restart',
1365 * where there is code that does a proper char-based test */
1366 if (rx_origin + start_shift + end_shift > strend) {
1367 DEBUG_EXECUTE_r( Perl_re_printf( aTHX_
1368 " Could not match STCLASS...\n") );
1371 DEBUG_EXECUTE_r( Perl_re_printf( aTHX_
1372 " about to look for %s substr starting at offset %ld (rx_origin now %"IVdf")...\n",
1373 (prog->substrs->check_ix ? "floating" : "anchored"),
1374 (long)(rx_origin + start_shift - strbeg),
1375 (IV)(rx_origin - strbeg)
1382 if (rx_origin != s) {
1383 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1384 " By STCLASS: moving %ld --> %ld\n",
1385 (long)(rx_origin - strbeg), (long)(s - strbeg))
1389 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1390 " Does not contradict STCLASS...\n");
1395 /* Decide whether using the substrings helped */
1397 if (rx_origin != strpos) {
1398 /* Fixed substring is found far enough so that the match
1399 cannot start at strpos. */
1401 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_ " try at offset...\n"));
1402 ++BmUSEFUL(utf8_target ? prog->check_utf8 : prog->check_substr); /* hooray/5 */
1405 /* The found rx_origin position does not prohibit matching at
1406 * strpos, so calling intuit didn't gain us anything. Decrement
1407 * the BmUSEFUL() count on the check substring, and if we reach
1409 if (!(prog->intflags & PREGf_NAUGHTY)
1411 prog->check_utf8 /* Could be deleted already */
1412 && --BmUSEFUL(prog->check_utf8) < 0
1413 && (prog->check_utf8 == prog->float_utf8)
1415 prog->check_substr /* Could be deleted already */
1416 && --BmUSEFUL(prog->check_substr) < 0
1417 && (prog->check_substr == prog->float_substr)
1420 /* If flags & SOMETHING - do not do it many times on the same match */
1421 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_ " ... Disabling check substring...\n"));
1422 /* XXX Does the destruction order has to change with utf8_target? */
1423 SvREFCNT_dec(utf8_target ? prog->check_utf8 : prog->check_substr);
1424 SvREFCNT_dec(utf8_target ? prog->check_substr : prog->check_utf8);
1425 prog->check_substr = prog->check_utf8 = NULL; /* disable */
1426 prog->float_substr = prog->float_utf8 = NULL; /* clear */
1427 check = NULL; /* abort */
1428 /* XXXX This is a remnant of the old implementation. It
1429 looks wasteful, since now INTUIT can use many
1430 other heuristics. */
1431 prog->extflags &= ~RXf_USE_INTUIT;
1435 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
1436 "Intuit: %sSuccessfully guessed:%s match at offset %ld\n",
1437 PL_colors[4], PL_colors[5], (long)(rx_origin - strbeg)) );
1441 fail_finish: /* Substring not found */
1442 if (prog->check_substr || prog->check_utf8) /* could be removed already */
1443 BmUSEFUL(utf8_target ? prog->check_utf8 : prog->check_substr) += 5; /* hooray */
1445 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_ "%sMatch rejected by optimizer%s\n",
1446 PL_colors[4], PL_colors[5]));
1451 #define DECL_TRIE_TYPE(scan) \
1452 const enum { trie_plain, trie_utf8, trie_utf8_fold, trie_latin_utf8_fold, \
1453 trie_utf8_exactfa_fold, trie_latin_utf8_exactfa_fold, \
1454 trie_utf8l, trie_flu8 } \
1455 trie_type = ((scan->flags == EXACT) \
1456 ? (utf8_target ? trie_utf8 : trie_plain) \
1457 : (scan->flags == EXACTL) \
1458 ? (utf8_target ? trie_utf8l : trie_plain) \
1459 : (scan->flags == EXACTFA) \
1461 ? trie_utf8_exactfa_fold \
1462 : trie_latin_utf8_exactfa_fold) \
1463 : (scan->flags == EXACTFLU8 \
1467 : trie_latin_utf8_fold)))
1469 #define REXEC_TRIE_READ_CHAR(trie_type, trie, widecharmap, uc, uscan, len, uvc, charid, foldlen, foldbuf, uniflags) \
1472 U8 flags = FOLD_FLAGS_FULL; \
1473 switch (trie_type) { \
1475 _CHECK_AND_WARN_PROBLEMATIC_LOCALE; \
1476 if (utf8_target && UTF8_IS_ABOVE_LATIN1(*uc)) { \
1477 _CHECK_AND_OUTPUT_WIDE_LOCALE_UTF8_MSG(uc, uc + UTF8SKIP(uc)); \
1479 goto do_trie_utf8_fold; \
1480 case trie_utf8_exactfa_fold: \
1481 flags |= FOLD_FLAGS_NOMIX_ASCII; \
1483 case trie_utf8_fold: \
1484 do_trie_utf8_fold: \
1485 if ( foldlen>0 ) { \
1486 uvc = utf8n_to_uvchr( (const U8*) uscan, UTF8_MAXLEN, &len, uniflags ); \
1491 uvc = _to_utf8_fold_flags( (const U8*) uc, foldbuf, &foldlen, flags); \
1492 len = UTF8SKIP(uc); \
1493 skiplen = UVCHR_SKIP( uvc ); \
1494 foldlen -= skiplen; \
1495 uscan = foldbuf + skiplen; \
1498 case trie_latin_utf8_exactfa_fold: \
1499 flags |= FOLD_FLAGS_NOMIX_ASCII; \
1501 case trie_latin_utf8_fold: \
1502 if ( foldlen>0 ) { \
1503 uvc = utf8n_to_uvchr( (const U8*) uscan, UTF8_MAXLEN, &len, uniflags ); \
1509 uvc = _to_fold_latin1( (U8) *uc, foldbuf, &foldlen, flags); \
1510 skiplen = UVCHR_SKIP( uvc ); \
1511 foldlen -= skiplen; \
1512 uscan = foldbuf + skiplen; \
1516 _CHECK_AND_WARN_PROBLEMATIC_LOCALE; \
1517 if (utf8_target && UTF8_IS_ABOVE_LATIN1(*uc)) { \
1518 _CHECK_AND_OUTPUT_WIDE_LOCALE_UTF8_MSG(uc, uc + UTF8SKIP(uc)); \
1522 uvc = utf8n_to_uvchr( (const U8*) uc, UTF8_MAXLEN, &len, uniflags ); \
1529 charid = trie->charmap[ uvc ]; \
1533 if (widecharmap) { \
1534 SV** const svpp = hv_fetch(widecharmap, \
1535 (char*)&uvc, sizeof(UV), 0); \
1537 charid = (U16)SvIV(*svpp); \
1542 #define DUMP_EXEC_POS(li,s,doutf8,depth) \
1543 dump_exec_pos(li,s,(reginfo->strend),(reginfo->strbeg), \
1544 startpos, doutf8, depth)
1546 #define REXEC_FBC_EXACTISH_SCAN(COND) \
1550 && (ln == 1 || folder(s, pat_string, ln)) \
1551 && (reginfo->intuit || regtry(reginfo, &s)) )\
1557 #define REXEC_FBC_UTF8_SCAN(CODE) \
1559 while (s < strend) { \
1565 #define REXEC_FBC_SCAN(CODE) \
1567 while (s < strend) { \
1573 #define REXEC_FBC_UTF8_CLASS_SCAN(COND) \
1574 REXEC_FBC_UTF8_SCAN( /* Loops while (s < strend) */ \
1576 if (tmp && (reginfo->intuit || regtry(reginfo, &s))) \
1585 #define REXEC_FBC_CLASS_SCAN(COND) \
1586 REXEC_FBC_SCAN( /* Loops while (s < strend) */ \
1588 if (tmp && (reginfo->intuit || regtry(reginfo, &s))) \
1597 #define REXEC_FBC_CSCAN(CONDUTF8,COND) \
1598 if (utf8_target) { \
1599 REXEC_FBC_UTF8_CLASS_SCAN(CONDUTF8); \
1602 REXEC_FBC_CLASS_SCAN(COND); \
1605 /* The three macros below are slightly different versions of the same logic.
1607 * The first is for /a and /aa when the target string is UTF-8. This can only
1608 * match ascii, but it must advance based on UTF-8. The other two handle the
1609 * non-UTF-8 and the more generic UTF-8 cases. In all three, we are looking
1610 * for the boundary (or non-boundary) between a word and non-word character.
1611 * The utf8 and non-utf8 cases have the same logic, but the details must be
1612 * different. Find the "wordness" of the character just prior to this one, and
1613 * compare it with the wordness of this one. If they differ, we have a
1614 * boundary. At the beginning of the string, pretend that the previous
1615 * character was a new-line.
1617 * All these macros uncleanly have side-effects with each other and outside
1618 * variables. So far it's been too much trouble to clean-up
1620 * TEST_NON_UTF8 is the macro or function to call to test if its byte input is
1621 * a word character or not.
1622 * IF_SUCCESS is code to do if it finds that we are at a boundary between
1624 * IF_FAIL is code to do if we aren't at a boundary between word/non-word
1626 * Exactly one of the two IF_FOO parameters is a no-op, depending on whether we
1627 * are looking for a boundary or for a non-boundary. If we are looking for a
1628 * boundary, we want IF_FAIL to be the no-op, and for IF_SUCCESS to go out and
1629 * see if this tentative match actually works, and if so, to quit the loop
1630 * here. And vice-versa if we are looking for a non-boundary.
1632 * 'tmp' below in the next three macros in the REXEC_FBC_SCAN and
1633 * REXEC_FBC_UTF8_SCAN loops is a loop invariant, a bool giving the return of
1634 * TEST_NON_UTF8(s-1). To see this, note that that's what it is defined to be
1635 * at entry to the loop, and to get to the IF_FAIL branch, tmp must equal
1636 * TEST_NON_UTF8(s), and in the opposite branch, IF_SUCCESS, tmp is that
1637 * complement. But in that branch we complement tmp, meaning that at the
1638 * bottom of the loop tmp is always going to be equal to TEST_NON_UTF8(s),
1639 * which means at the top of the loop in the next iteration, it is
1640 * TEST_NON_UTF8(s-1) */
1641 #define FBC_UTF8_A(TEST_NON_UTF8, IF_SUCCESS, IF_FAIL) \
1642 tmp = (s != reginfo->strbeg) ? UCHARAT(s - 1) : '\n'; \
1643 tmp = TEST_NON_UTF8(tmp); \
1644 REXEC_FBC_UTF8_SCAN( /* advances s while s < strend */ \
1645 if (tmp == ! TEST_NON_UTF8((U8) *s)) { \
1647 IF_SUCCESS; /* Is a boundary if values for s-1 and s differ */ \
1654 /* Like FBC_UTF8_A, but TEST_UV is a macro which takes a UV as its input, and
1655 * TEST_UTF8 is a macro that for the same input code points returns identically
1656 * to TEST_UV, but takes a pointer to a UTF-8 encoded string instead */
1657 #define FBC_UTF8(TEST_UV, TEST_UTF8, IF_SUCCESS, IF_FAIL) \
1658 if (s == reginfo->strbeg) { \
1661 else { /* Back-up to the start of the previous character */ \
1662 U8 * const r = reghop3((U8*)s, -1, (U8*)reginfo->strbeg); \
1663 tmp = utf8n_to_uvchr(r, (U8*) reginfo->strend - r, \
1664 0, UTF8_ALLOW_DEFAULT); \
1666 tmp = TEST_UV(tmp); \
1667 LOAD_UTF8_CHARCLASS_ALNUM(); \
1668 REXEC_FBC_UTF8_SCAN( /* advances s while s < strend */ \
1669 if (tmp == ! (TEST_UTF8((U8 *) s))) { \
1678 /* Like the above two macros. UTF8_CODE is the complete code for handling
1679 * UTF-8. Common to the BOUND and NBOUND cases, set-up by the FBC_BOUND, etc
1681 #define FBC_BOUND_COMMON(UTF8_CODE, TEST_NON_UTF8, IF_SUCCESS, IF_FAIL) \
1682 if (utf8_target) { \
1685 else { /* Not utf8 */ \
1686 tmp = (s != reginfo->strbeg) ? UCHARAT(s - 1) : '\n'; \
1687 tmp = TEST_NON_UTF8(tmp); \
1688 REXEC_FBC_SCAN( /* advances s while s < strend */ \
1689 if (tmp == ! TEST_NON_UTF8((U8) *s)) { \
1698 /* Here, things have been set up by the previous code so that tmp is the \
1699 * return of TEST_NON_UTF(s-1) or TEST_UTF8(s-1) (depending on the \
1700 * utf8ness of the target). We also have to check if this matches against \
1701 * the EOS, which we treat as a \n (which is the same value in both UTF-8 \
1702 * or non-UTF8, so can use the non-utf8 test condition even for a UTF-8 \
1704 if (tmp == ! TEST_NON_UTF8('\n')) { \
1711 /* This is the macro to use when we want to see if something that looks like it
1712 * could match, actually does, and if so exits the loop */
1713 #define REXEC_FBC_TRYIT \
1714 if ((reginfo->intuit || regtry(reginfo, &s))) \
1717 /* The only difference between the BOUND and NBOUND cases is that
1718 * REXEC_FBC_TRYIT is called when matched in BOUND, and when non-matched in
1719 * NBOUND. This is accomplished by passing it as either the if or else clause,
1720 * with the other one being empty (PLACEHOLDER is defined as empty).
1722 * The TEST_FOO parameters are for operating on different forms of input, but
1723 * all should be ones that return identically for the same underlying code
1725 #define FBC_BOUND(TEST_NON_UTF8, TEST_UV, TEST_UTF8) \
1727 FBC_UTF8(TEST_UV, TEST_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER), \
1728 TEST_NON_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER)
1730 #define FBC_BOUND_A(TEST_NON_UTF8) \
1732 FBC_UTF8_A(TEST_NON_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER), \
1733 TEST_NON_UTF8, REXEC_FBC_TRYIT, PLACEHOLDER)
1735 #define FBC_NBOUND(TEST_NON_UTF8, TEST_UV, TEST_UTF8) \
1737 FBC_UTF8(TEST_UV, TEST_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT), \
1738 TEST_NON_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT)
1740 #define FBC_NBOUND_A(TEST_NON_UTF8) \
1742 FBC_UTF8_A(TEST_NON_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT), \
1743 TEST_NON_UTF8, PLACEHOLDER, REXEC_FBC_TRYIT)
1747 S_get_break_val_cp_checked(SV* const invlist, const UV cp_in) {
1748 IV cp_out = Perl__invlist_search(invlist, cp_in);
1749 assert(cp_out >= 0);
1752 # define _generic_GET_BREAK_VAL_CP_CHECKED(invlist, invmap, cp) \
1753 invmap[S_get_break_val_cp_checked(invlist, cp)]
1755 # define _generic_GET_BREAK_VAL_CP_CHECKED(invlist, invmap, cp) \
1756 invmap[_invlist_search(invlist, cp)]
1759 /* Takes a pointer to an inversion list, a pointer to its corresponding
1760 * inversion map, and a code point, and returns the code point's value
1761 * according to the two arrays. It assumes that all code points have a value.
1762 * This is used as the base macro for macros for particular properties */
1763 #define _generic_GET_BREAK_VAL_CP(invlist, invmap, cp) \
1764 _generic_GET_BREAK_VAL_CP_CHECKED(invlist, invmap, cp)
1766 /* Same as above, but takes begin, end ptrs to a UTF-8 encoded string instead
1767 * of a code point, returning the value for the first code point in the string.
1768 * And it takes the particular macro name that finds the desired value given a
1769 * code point. Merely convert the UTF-8 to code point and call the cp macro */
1770 #define _generic_GET_BREAK_VAL_UTF8(cp_macro, pos, strend) \
1771 (__ASSERT_(pos < strend) \
1772 /* Note assumes is valid UTF-8 */ \
1773 (cp_macro(utf8_to_uvchr_buf((pos), (strend), NULL))))
1775 /* Returns the GCB value for the input code point */
1776 #define getGCB_VAL_CP(cp) \
1777 _generic_GET_BREAK_VAL_CP( \
1782 /* Returns the GCB value for the first code point in the UTF-8 encoded string
1783 * bounded by pos and strend */
1784 #define getGCB_VAL_UTF8(pos, strend) \
1785 _generic_GET_BREAK_VAL_UTF8(getGCB_VAL_CP, pos, strend)
1787 /* Returns the LB value for the input code point */
1788 #define getLB_VAL_CP(cp) \
1789 _generic_GET_BREAK_VAL_CP( \
1794 /* Returns the LB value for the first code point in the UTF-8 encoded string
1795 * bounded by pos and strend */
1796 #define getLB_VAL_UTF8(pos, strend) \
1797 _generic_GET_BREAK_VAL_UTF8(getLB_VAL_CP, pos, strend)
1800 /* Returns the SB value for the input code point */
1801 #define getSB_VAL_CP(cp) \
1802 _generic_GET_BREAK_VAL_CP( \
1807 /* Returns the SB value for the first code point in the UTF-8 encoded string
1808 * bounded by pos and strend */
1809 #define getSB_VAL_UTF8(pos, strend) \
1810 _generic_GET_BREAK_VAL_UTF8(getSB_VAL_CP, pos, strend)
1812 /* Returns the WB value for the input code point */
1813 #define getWB_VAL_CP(cp) \
1814 _generic_GET_BREAK_VAL_CP( \
1819 /* Returns the WB value for the first code point in the UTF-8 encoded string
1820 * bounded by pos and strend */
1821 #define getWB_VAL_UTF8(pos, strend) \
1822 _generic_GET_BREAK_VAL_UTF8(getWB_VAL_CP, pos, strend)
1824 /* We know what class REx starts with. Try to find this position... */
1825 /* if reginfo->intuit, its a dryrun */
1826 /* annoyingly all the vars in this routine have different names from their counterparts
1827 in regmatch. /grrr */
1829 S_find_byclass(pTHX_ regexp * prog, const regnode *c, char *s,
1830 const char *strend, regmatch_info *reginfo)
1833 const I32 doevery = (prog->intflags & PREGf_SKIP) == 0;
1834 char *pat_string; /* The pattern's exactish string */
1835 char *pat_end; /* ptr to end char of pat_string */
1836 re_fold_t folder; /* Function for computing non-utf8 folds */
1837 const U8 *fold_array; /* array for folding ords < 256 */
1843 I32 tmp = 1; /* Scratch variable? */
1844 const bool utf8_target = reginfo->is_utf8_target;
1845 UV utf8_fold_flags = 0;
1846 const bool is_utf8_pat = reginfo->is_utf8_pat;
1847 bool to_complement = FALSE; /* Invert the result? Taking the xor of this
1848 with a result inverts that result, as 0^1 =
1850 _char_class_number classnum;
1852 RXi_GET_DECL(prog,progi);
1854 PERL_ARGS_ASSERT_FIND_BYCLASS;
1856 /* We know what class it must start with. */
1859 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
1861 if (ANYOFL_UTF8_LOCALE_REQD(FLAGS(c)) && ! IN_UTF8_CTYPE_LOCALE) {
1862 Perl_ck_warner(aTHX_ packWARN(WARN_LOCALE), utf8_locale_required);
1869 REXEC_FBC_UTF8_CLASS_SCAN(
1870 reginclass(prog, c, (U8*)s, (U8*) strend, utf8_target));
1873 REXEC_FBC_CLASS_SCAN(REGINCLASS(prog, c, (U8*)s, 0));
1877 case EXACTFA_NO_TRIE: /* This node only generated for non-utf8 patterns */
1878 assert(! is_utf8_pat);
1881 if (is_utf8_pat || utf8_target) {
1882 utf8_fold_flags = FOLDEQ_UTF8_NOMIX_ASCII;
1883 goto do_exactf_utf8;
1885 fold_array = PL_fold_latin1; /* Latin1 folds are not affected by */
1886 folder = foldEQ_latin1; /* /a, except the sharp s one which */
1887 goto do_exactf_non_utf8; /* isn't dealt with by these */
1889 case EXACTF: /* This node only generated for non-utf8 patterns */
1890 assert(! is_utf8_pat);
1892 utf8_fold_flags = 0;
1893 goto do_exactf_utf8;
1895 fold_array = PL_fold;
1897 goto do_exactf_non_utf8;
1900 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
1901 if (is_utf8_pat || utf8_target || IN_UTF8_CTYPE_LOCALE) {
1902 utf8_fold_flags = FOLDEQ_LOCALE;
1903 goto do_exactf_utf8;
1905 fold_array = PL_fold_locale;
1906 folder = foldEQ_locale;
1907 goto do_exactf_non_utf8;
1911 utf8_fold_flags = FOLDEQ_S2_ALREADY_FOLDED;
1913 goto do_exactf_utf8;
1916 if (! utf8_target) { /* All code points in this node require
1917 UTF-8 to express. */
1920 utf8_fold_flags = FOLDEQ_LOCALE | FOLDEQ_S2_ALREADY_FOLDED
1921 | FOLDEQ_S2_FOLDS_SANE;
1922 goto do_exactf_utf8;
1925 if (is_utf8_pat || utf8_target) {
1926 utf8_fold_flags = is_utf8_pat ? FOLDEQ_S2_ALREADY_FOLDED : 0;
1927 goto do_exactf_utf8;
1930 /* Any 'ss' in the pattern should have been replaced by regcomp,
1931 * so we don't have to worry here about this single special case
1932 * in the Latin1 range */
1933 fold_array = PL_fold_latin1;
1934 folder = foldEQ_latin1;
1938 do_exactf_non_utf8: /* Neither pattern nor string are UTF8, and there
1939 are no glitches with fold-length differences
1940 between the target string and pattern */
1942 /* The idea in the non-utf8 EXACTF* cases is to first find the
1943 * first character of the EXACTF* node and then, if necessary,
1944 * case-insensitively compare the full text of the node. c1 is the
1945 * first character. c2 is its fold. This logic will not work for
1946 * Unicode semantics and the german sharp ss, which hence should
1947 * not be compiled into a node that gets here. */
1948 pat_string = STRING(c);
1949 ln = STR_LEN(c); /* length to match in octets/bytes */
1951 /* We know that we have to match at least 'ln' bytes (which is the
1952 * same as characters, since not utf8). If we have to match 3
1953 * characters, and there are only 2 availabe, we know without
1954 * trying that it will fail; so don't start a match past the
1955 * required minimum number from the far end */
1956 e = HOP3c(strend, -((SSize_t)ln), s);
1958 if (reginfo->intuit && e < s) {
1959 e = s; /* Due to minlen logic of intuit() */
1963 c2 = fold_array[c1];
1964 if (c1 == c2) { /* If char and fold are the same */
1965 REXEC_FBC_EXACTISH_SCAN(*(U8*)s == c1);
1968 REXEC_FBC_EXACTISH_SCAN(*(U8*)s == c1 || *(U8*)s == c2);
1976 /* If one of the operands is in utf8, we can't use the simpler folding
1977 * above, due to the fact that many different characters can have the
1978 * same fold, or portion of a fold, or different- length fold */
1979 pat_string = STRING(c);
1980 ln = STR_LEN(c); /* length to match in octets/bytes */
1981 pat_end = pat_string + ln;
1982 lnc = is_utf8_pat /* length to match in characters */
1983 ? utf8_length((U8 *) pat_string, (U8 *) pat_end)
1986 /* We have 'lnc' characters to match in the pattern, but because of
1987 * multi-character folding, each character in the target can match
1988 * up to 3 characters (Unicode guarantees it will never exceed
1989 * this) if it is utf8-encoded; and up to 2 if not (based on the
1990 * fact that the Latin 1 folds are already determined, and the
1991 * only multi-char fold in that range is the sharp-s folding to
1992 * 'ss'. Thus, a pattern character can match as little as 1/3 of a
1993 * string character. Adjust lnc accordingly, rounding up, so that
1994 * if we need to match at least 4+1/3 chars, that really is 5. */
1995 expansion = (utf8_target) ? UTF8_MAX_FOLD_CHAR_EXPAND : 2;
1996 lnc = (lnc + expansion - 1) / expansion;
1998 /* As in the non-UTF8 case, if we have to match 3 characters, and
1999 * only 2 are left, it's guaranteed to fail, so don't start a
2000 * match that would require us to go beyond the end of the string
2002 e = HOP3c(strend, -((SSize_t)lnc), s);
2004 if (reginfo->intuit && e < s) {
2005 e = s; /* Due to minlen logic of intuit() */
2008 /* XXX Note that we could recalculate e to stop the loop earlier,
2009 * as the worst case expansion above will rarely be met, and as we
2010 * go along we would usually find that e moves further to the left.
2011 * This would happen only after we reached the point in the loop
2012 * where if there were no expansion we should fail. Unclear if
2013 * worth the expense */
2016 char *my_strend= (char *)strend;
2017 if (foldEQ_utf8_flags(s, &my_strend, 0, utf8_target,
2018 pat_string, NULL, ln, is_utf8_pat, utf8_fold_flags)
2019 && (reginfo->intuit || regtry(reginfo, &s)) )
2023 s += (utf8_target) ? UTF8SKIP(s) : 1;
2029 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
2030 if (FLAGS(c) != TRADITIONAL_BOUND) {
2031 if (! IN_UTF8_CTYPE_LOCALE) {
2032 Perl_ck_warner(aTHX_ packWARN(WARN_LOCALE),
2033 B_ON_NON_UTF8_LOCALE_IS_WRONG);
2038 FBC_BOUND(isWORDCHAR_LC, isWORDCHAR_LC_uvchr, isWORDCHAR_LC_utf8);
2042 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
2043 if (FLAGS(c) != TRADITIONAL_BOUND) {
2044 if (! IN_UTF8_CTYPE_LOCALE) {
2045 Perl_ck_warner(aTHX_ packWARN(WARN_LOCALE),
2046 B_ON_NON_UTF8_LOCALE_IS_WRONG);
2051 FBC_NBOUND(isWORDCHAR_LC, isWORDCHAR_LC_uvchr, isWORDCHAR_LC_utf8);
2054 case BOUND: /* regcomp.c makes sure that this only has the traditional \b
2056 assert(FLAGS(c) == TRADITIONAL_BOUND);
2058 FBC_BOUND(isWORDCHAR, isWORDCHAR_uni, isWORDCHAR_utf8);
2061 case BOUNDA: /* regcomp.c makes sure that this only has the traditional \b
2063 assert(FLAGS(c) == TRADITIONAL_BOUND);
2065 FBC_BOUND_A(isWORDCHAR_A);
2068 case NBOUND: /* regcomp.c makes sure that this only has the traditional \b
2070 assert(FLAGS(c) == TRADITIONAL_BOUND);
2072 FBC_NBOUND(isWORDCHAR, isWORDCHAR_uni, isWORDCHAR_utf8);
2075 case NBOUNDA: /* regcomp.c makes sure that this only has the traditional \b
2077 assert(FLAGS(c) == TRADITIONAL_BOUND);
2079 FBC_NBOUND_A(isWORDCHAR_A);
2083 if ((bound_type) FLAGS(c) == TRADITIONAL_BOUND) {
2084 FBC_NBOUND(isWORDCHAR_L1, isWORDCHAR_uni, isWORDCHAR_utf8);
2095 switch((bound_type) FLAGS(c)) {
2096 case TRADITIONAL_BOUND:
2097 FBC_BOUND(isWORDCHAR_L1, isWORDCHAR_uni, isWORDCHAR_utf8);
2100 if (s == reginfo->strbeg) {
2101 if (reginfo->intuit || regtry(reginfo, &s))
2106 /* Didn't match. Try at the next position (if there is one) */
2107 s += (utf8_target) ? UTF8SKIP(s) : 1;
2108 if (UNLIKELY(s >= reginfo->strend)) {
2114 GCB_enum before = getGCB_VAL_UTF8(
2116 (U8*)(reginfo->strbeg)),
2117 (U8*) reginfo->strend);
2118 while (s < strend) {
2119 GCB_enum after = getGCB_VAL_UTF8((U8*) s,
2120 (U8*) reginfo->strend);
2121 if ( (to_complement ^ isGCB(before, after))
2122 && (reginfo->intuit || regtry(reginfo, &s)))
2130 else { /* Not utf8. Everything is a GCB except between CR and
2132 while (s < strend) {
2133 if ((to_complement ^ ( UCHARAT(s - 1) != '\r'
2134 || UCHARAT(s) != '\n'))
2135 && (reginfo->intuit || regtry(reginfo, &s)))
2143 /* And, since this is a bound, it can match after the final
2144 * character in the string */
2145 if ((reginfo->intuit || regtry(reginfo, &s))) {
2151 if (s == reginfo->strbeg) {
2152 if (reginfo->intuit || regtry(reginfo, &s)) {
2155 s += (utf8_target) ? UTF8SKIP(s) : 1;
2156 if (UNLIKELY(s >= reginfo->strend)) {
2162 LB_enum before = getLB_VAL_UTF8(reghop3((U8*)s,
2164 (U8*)(reginfo->strbeg)),
2165 (U8*) reginfo->strend);
2166 while (s < strend) {
2167 LB_enum after = getLB_VAL_UTF8((U8*) s, (U8*) reginfo->strend);
2168 if (to_complement ^ isLB(before,
2170 (U8*) reginfo->strbeg,
2172 (U8*) reginfo->strend,
2174 && (reginfo->intuit || regtry(reginfo, &s)))
2182 else { /* Not utf8. */
2183 LB_enum before = getLB_VAL_CP((U8) *(s -1));
2184 while (s < strend) {
2185 LB_enum after = getLB_VAL_CP((U8) *s);
2186 if (to_complement ^ isLB(before,
2188 (U8*) reginfo->strbeg,
2190 (U8*) reginfo->strend,
2192 && (reginfo->intuit || regtry(reginfo, &s)))
2201 if (reginfo->intuit || regtry(reginfo, &s)) {
2208 if (s == reginfo->strbeg) {
2209 if (reginfo->intuit || regtry(reginfo, &s)) {
2212 s += (utf8_target) ? UTF8SKIP(s) : 1;
2213 if (UNLIKELY(s >= reginfo->strend)) {
2219 SB_enum before = getSB_VAL_UTF8(reghop3((U8*)s,
2221 (U8*)(reginfo->strbeg)),
2222 (U8*) reginfo->strend);
2223 while (s < strend) {
2224 SB_enum after = getSB_VAL_UTF8((U8*) s,
2225 (U8*) reginfo->strend);
2226 if ((to_complement ^ isSB(before,
2228 (U8*) reginfo->strbeg,
2230 (U8*) reginfo->strend,
2232 && (reginfo->intuit || regtry(reginfo, &s)))
2240 else { /* Not utf8. */
2241 SB_enum before = getSB_VAL_CP((U8) *(s -1));
2242 while (s < strend) {
2243 SB_enum after = getSB_VAL_CP((U8) *s);
2244 if ((to_complement ^ isSB(before,
2246 (U8*) reginfo->strbeg,
2248 (U8*) reginfo->strend,
2250 && (reginfo->intuit || regtry(reginfo, &s)))
2259 /* Here are at the final position in the target string. The SB
2260 * value is always true here, so matches, depending on other
2262 if (reginfo->intuit || regtry(reginfo, &s)) {
2269 if (s == reginfo->strbeg) {
2270 if (reginfo->intuit || regtry(reginfo, &s)) {
2273 s += (utf8_target) ? UTF8SKIP(s) : 1;
2274 if (UNLIKELY(s >= reginfo->strend)) {
2280 /* We are at a boundary between char_sub_0 and char_sub_1.
2281 * We also keep track of the value for char_sub_-1 as we
2282 * loop through the line. Context may be needed to make a
2283 * determination, and if so, this can save having to
2285 WB_enum previous = WB_UNKNOWN;
2286 WB_enum before = getWB_VAL_UTF8(
2289 (U8*)(reginfo->strbeg)),
2290 (U8*) reginfo->strend);
2291 while (s < strend) {
2292 WB_enum after = getWB_VAL_UTF8((U8*) s,
2293 (U8*) reginfo->strend);
2294 if ((to_complement ^ isWB(previous,
2297 (U8*) reginfo->strbeg,
2299 (U8*) reginfo->strend,
2301 && (reginfo->intuit || regtry(reginfo, &s)))
2310 else { /* Not utf8. */
2311 WB_enum previous = WB_UNKNOWN;
2312 WB_enum before = getWB_VAL_CP((U8) *(s -1));
2313 while (s < strend) {
2314 WB_enum after = getWB_VAL_CP((U8) *s);
2315 if ((to_complement ^ isWB(previous,
2318 (U8*) reginfo->strbeg,
2320 (U8*) reginfo->strend,
2322 && (reginfo->intuit || regtry(reginfo, &s)))
2332 if (reginfo->intuit || regtry(reginfo, &s)) {
2339 REXEC_FBC_CSCAN(is_LNBREAK_utf8_safe(s, strend),
2340 is_LNBREAK_latin1_safe(s, strend)
2344 /* The argument to all the POSIX node types is the class number to pass to
2345 * _generic_isCC() to build a mask for searching in PL_charclass[] */
2352 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
2353 REXEC_FBC_CSCAN(to_complement ^ cBOOL(isFOO_utf8_lc(FLAGS(c), (U8 *) s)),
2354 to_complement ^ cBOOL(isFOO_lc(FLAGS(c), *s)));
2369 /* The complement of something that matches only ASCII matches all
2370 * non-ASCII, plus everything in ASCII that isn't in the class. */
2371 REXEC_FBC_UTF8_CLASS_SCAN(! isASCII_utf8(s)
2372 || ! _generic_isCC_A(*s, FLAGS(c)));
2381 /* Don't need to worry about utf8, as it can match only a single
2382 * byte invariant character. */
2383 REXEC_FBC_CLASS_SCAN(
2384 to_complement ^ cBOOL(_generic_isCC_A(*s, FLAGS(c))));
2392 if (! utf8_target) {
2393 REXEC_FBC_CLASS_SCAN(to_complement ^ cBOOL(_generic_isCC(*s,
2399 classnum = (_char_class_number) FLAGS(c);
2400 if (classnum < _FIRST_NON_SWASH_CC) {
2401 while (s < strend) {
2403 /* We avoid loading in the swash as long as possible, but
2404 * should we have to, we jump to a separate loop. This
2405 * extra 'if' statement is what keeps this code from being
2406 * just a call to REXEC_FBC_UTF8_CLASS_SCAN() */
2407 if (UTF8_IS_ABOVE_LATIN1(*s)) {
2408 goto found_above_latin1;
2410 if ((UTF8_IS_INVARIANT(*s)
2411 && to_complement ^ cBOOL(_generic_isCC((U8) *s,
2413 || (UTF8_IS_DOWNGRADEABLE_START(*s)
2414 && to_complement ^ cBOOL(
2415 _generic_isCC(EIGHT_BIT_UTF8_TO_NATIVE(*s,
2419 if (tmp && (reginfo->intuit || regtry(reginfo, &s)))
2431 else switch (classnum) { /* These classes are implemented as
2433 case _CC_ENUM_SPACE:
2434 REXEC_FBC_UTF8_CLASS_SCAN(
2435 to_complement ^ cBOOL(isSPACE_utf8(s)));
2438 case _CC_ENUM_BLANK:
2439 REXEC_FBC_UTF8_CLASS_SCAN(
2440 to_complement ^ cBOOL(isBLANK_utf8(s)));
2443 case _CC_ENUM_XDIGIT:
2444 REXEC_FBC_UTF8_CLASS_SCAN(
2445 to_complement ^ cBOOL(isXDIGIT_utf8(s)));
2448 case _CC_ENUM_VERTSPACE:
2449 REXEC_FBC_UTF8_CLASS_SCAN(
2450 to_complement ^ cBOOL(isVERTWS_utf8(s)));
2453 case _CC_ENUM_CNTRL:
2454 REXEC_FBC_UTF8_CLASS_SCAN(
2455 to_complement ^ cBOOL(isCNTRL_utf8(s)));
2459 Perl_croak(aTHX_ "panic: find_byclass() node %d='%s' has an unexpected character class '%d'", OP(c), PL_reg_name[OP(c)], classnum);
2460 NOT_REACHED; /* NOTREACHED */
2465 found_above_latin1: /* Here we have to load a swash to get the result
2466 for the current code point */
2467 if (! PL_utf8_swash_ptrs[classnum]) {
2468 U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
2469 PL_utf8_swash_ptrs[classnum] =
2470 _core_swash_init("utf8",
2473 PL_XPosix_ptrs[classnum], &flags);
2476 /* This is a copy of the loop above for swash classes, though using the
2477 * FBC macro instead of being expanded out. Since we've loaded the
2478 * swash, we don't have to check for that each time through the loop */
2479 REXEC_FBC_UTF8_CLASS_SCAN(
2480 to_complement ^ cBOOL(_generic_utf8(
2483 swash_fetch(PL_utf8_swash_ptrs[classnum],
2491 /* what trie are we using right now */
2492 reg_ac_data *aho = (reg_ac_data*)progi->data->data[ ARG( c ) ];
2493 reg_trie_data *trie = (reg_trie_data*)progi->data->data[ aho->trie ];
2494 HV *widecharmap = MUTABLE_HV(progi->data->data[ aho->trie + 1 ]);
2496 const char *last_start = strend - trie->minlen;
2498 const char *real_start = s;
2500 STRLEN maxlen = trie->maxlen;
2502 U8 **points; /* map of where we were in the input string
2503 when reading a given char. For ASCII this
2504 is unnecessary overhead as the relationship
2505 is always 1:1, but for Unicode, especially
2506 case folded Unicode this is not true. */
2507 U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
2511 GET_RE_DEBUG_FLAGS_DECL;
2513 /* We can't just allocate points here. We need to wrap it in
2514 * an SV so it gets freed properly if there is a croak while
2515 * running the match */
2518 sv_points=newSV(maxlen * sizeof(U8 *));
2519 SvCUR_set(sv_points,
2520 maxlen * sizeof(U8 *));
2521 SvPOK_on(sv_points);
2522 sv_2mortal(sv_points);
2523 points=(U8**)SvPV_nolen(sv_points );
2524 if ( trie_type != trie_utf8_fold
2525 && (trie->bitmap || OP(c)==AHOCORASICKC) )
2528 bitmap=(U8*)trie->bitmap;
2530 bitmap=(U8*)ANYOF_BITMAP(c);
2532 /* this is the Aho-Corasick algorithm modified a touch
2533 to include special handling for long "unknown char" sequences.
2534 The basic idea being that we use AC as long as we are dealing
2535 with a possible matching char, when we encounter an unknown char
2536 (and we have not encountered an accepting state) we scan forward
2537 until we find a legal starting char.
2538 AC matching is basically that of trie matching, except that when
2539 we encounter a failing transition, we fall back to the current
2540 states "fail state", and try the current char again, a process
2541 we repeat until we reach the root state, state 1, or a legal
2542 transition. If we fail on the root state then we can either
2543 terminate if we have reached an accepting state previously, or
2544 restart the entire process from the beginning if we have not.
2547 while (s <= last_start) {
2548 const U32 uniflags = UTF8_ALLOW_DEFAULT;
2556 U8 *uscan = (U8*)NULL;
2557 U8 *leftmost = NULL;
2559 U32 accepted_word= 0;
2563 while ( state && uc <= (U8*)strend ) {
2565 U32 word = aho->states[ state ].wordnum;
2569 DEBUG_TRIE_EXECUTE_r(
2570 if ( uc <= (U8*)last_start && !BITMAP_TEST(bitmap,*uc) ) {
2571 dump_exec_pos( (char *)uc, c, strend, real_start,
2572 (char *)uc, utf8_target, 0 );
2573 Perl_re_printf( aTHX_
2574 " Scanning for legal start char...\n");
2578 while ( uc <= (U8*)last_start && !BITMAP_TEST(bitmap,*uc) ) {
2582 while ( uc <= (U8*)last_start && !BITMAP_TEST(bitmap,*uc) ) {
2588 if (uc >(U8*)last_start) break;
2592 U8 *lpos= points[ (pointpos - trie->wordinfo[word].len) % maxlen ];
2593 if (!leftmost || lpos < leftmost) {
2594 DEBUG_r(accepted_word=word);
2600 points[pointpos++ % maxlen]= uc;
2601 if (foldlen || uc < (U8*)strend) {
2602 REXEC_TRIE_READ_CHAR(trie_type, trie,
2604 uscan, len, uvc, charid, foldlen,
2606 DEBUG_TRIE_EXECUTE_r({
2607 dump_exec_pos( (char *)uc, c, strend,
2608 real_start, s, utf8_target, 0);
2609 Perl_re_printf( aTHX_
2610 " Charid:%3u CP:%4"UVxf" ",
2622 word = aho->states[ state ].wordnum;
2624 base = aho->states[ state ].trans.base;
2626 DEBUG_TRIE_EXECUTE_r({
2628 dump_exec_pos( (char *)uc, c, strend, real_start,
2629 s, utf8_target, 0 );
2630 Perl_re_printf( aTHX_
2631 "%sState: %4"UVxf", word=%"UVxf,
2632 failed ? " Fail transition to " : "",
2633 (UV)state, (UV)word);
2639 ( ((offset = base + charid
2640 - 1 - trie->uniquecharcount)) >= 0)
2641 && ((U32)offset < trie->lasttrans)
2642 && trie->trans[offset].check == state
2643 && (tmp=trie->trans[offset].next))
2645 DEBUG_TRIE_EXECUTE_r(
2646 Perl_re_printf( aTHX_ " - legal\n"));
2651 DEBUG_TRIE_EXECUTE_r(
2652 Perl_re_printf( aTHX_ " - fail\n"));
2654 state = aho->fail[state];
2658 /* we must be accepting here */
2659 DEBUG_TRIE_EXECUTE_r(
2660 Perl_re_printf( aTHX_ " - accepting\n"));
2669 if (!state) state = 1;
2672 if ( aho->states[ state ].wordnum ) {
2673 U8 *lpos = points[ (pointpos - trie->wordinfo[aho->states[ state ].wordnum].len) % maxlen ];
2674 if (!leftmost || lpos < leftmost) {
2675 DEBUG_r(accepted_word=aho->states[ state ].wordnum);
2680 s = (char*)leftmost;
2681 DEBUG_TRIE_EXECUTE_r({
2682 Perl_re_printf( aTHX_ "Matches word #%"UVxf" at position %"IVdf". Trying full pattern...\n",
2683 (UV)accepted_word, (IV)(s - real_start)
2686 if (reginfo->intuit || regtry(reginfo, &s)) {
2692 DEBUG_TRIE_EXECUTE_r({
2693 Perl_re_printf( aTHX_ "Pattern failed. Looking for new start point...\n");
2696 DEBUG_TRIE_EXECUTE_r(
2697 Perl_re_printf( aTHX_ "No match.\n"));
2706 Perl_croak(aTHX_ "panic: unknown regstclass %d", (int)OP(c));
2713 /* set RX_SAVED_COPY, RX_SUBBEG etc.
2714 * flags have same meanings as with regexec_flags() */
2717 S_reg_set_capture_string(pTHX_ REGEXP * const rx,
2724 struct regexp *const prog = ReANY(rx);
2726 if (flags & REXEC_COPY_STR) {
2729 DEBUG_C(Perl_re_printf( aTHX_
2730 "Copy on write: regexp capture, type %d\n",
2732 /* Create a new COW SV to share the match string and store
2733 * in saved_copy, unless the current COW SV in saved_copy
2734 * is valid and suitable for our purpose */
2735 if (( prog->saved_copy
2736 && SvIsCOW(prog->saved_copy)
2737 && SvPOKp(prog->saved_copy)
2740 && SvPVX(sv) == SvPVX(prog->saved_copy)))
2742 /* just reuse saved_copy SV */
2743 if (RXp_MATCH_COPIED(prog)) {
2744 Safefree(prog->subbeg);
2745 RXp_MATCH_COPIED_off(prog);
2749 /* create new COW SV to share string */
2750 RX_MATCH_COPY_FREE(rx);
2751 prog->saved_copy = sv_setsv_cow(prog->saved_copy, sv);
2753 prog->subbeg = (char *)SvPVX_const(prog->saved_copy);
2754 assert (SvPOKp(prog->saved_copy));
2755 prog->sublen = strend - strbeg;
2756 prog->suboffset = 0;
2757 prog->subcoffset = 0;
2762 SSize_t max = strend - strbeg;
2765 if ( (flags & REXEC_COPY_SKIP_POST)
2766 && !(prog->extflags & RXf_PMf_KEEPCOPY) /* //p */
2767 && !(PL_sawampersand & SAWAMPERSAND_RIGHT)
2768 ) { /* don't copy $' part of string */
2771 /* calculate the right-most part of the string covered
2772 * by a capture. Due to lookahead, this may be to
2773 * the right of $&, so we have to scan all captures */
2774 while (n <= prog->lastparen) {
2775 if (prog->offs[n].end > max)
2776 max = prog->offs[n].end;
2780 max = (PL_sawampersand & SAWAMPERSAND_LEFT)
2781 ? prog->offs[0].start
2783 assert(max >= 0 && max <= strend - strbeg);
2786 if ( (flags & REXEC_COPY_SKIP_PRE)
2787 && !(prog->extflags & RXf_PMf_KEEPCOPY) /* //p */
2788 && !(PL_sawampersand & SAWAMPERSAND_LEFT)
2789 ) { /* don't copy $` part of string */
2792 /* calculate the left-most part of the string covered
2793 * by a capture. Due to lookbehind, this may be to
2794 * the left of $&, so we have to scan all captures */
2795 while (min && n <= prog->lastparen) {
2796 if ( prog->offs[n].start != -1
2797 && prog->offs[n].start < min)
2799 min = prog->offs[n].start;
2803 if ((PL_sawampersand & SAWAMPERSAND_RIGHT)
2804 && min > prog->offs[0].end
2806 min = prog->offs[0].end;
2810 assert(min >= 0 && min <= max && min <= strend - strbeg);
2813 if (RX_MATCH_COPIED(rx)) {
2814 if (sublen > prog->sublen)
2816 (char*)saferealloc(prog->subbeg, sublen+1);
2819 prog->subbeg = (char*)safemalloc(sublen+1);
2820 Copy(strbeg + min, prog->subbeg, sublen, char);
2821 prog->subbeg[sublen] = '\0';
2822 prog->suboffset = min;
2823 prog->sublen = sublen;
2824 RX_MATCH_COPIED_on(rx);
2826 prog->subcoffset = prog->suboffset;
2827 if (prog->suboffset && utf8_target) {
2828 /* Convert byte offset to chars.
2829 * XXX ideally should only compute this if @-/@+
2830 * has been seen, a la PL_sawampersand ??? */
2832 /* If there's a direct correspondence between the
2833 * string which we're matching and the original SV,
2834 * then we can use the utf8 len cache associated with
2835 * the SV. In particular, it means that under //g,
2836 * sv_pos_b2u() will use the previously cached
2837 * position to speed up working out the new length of
2838 * subcoffset, rather than counting from the start of
2839 * the string each time. This stops
2840 * $x = "\x{100}" x 1E6; 1 while $x =~ /(.)/g;
2841 * from going quadratic */
2842 if (SvPOKp(sv) && SvPVX(sv) == strbeg)
2843 prog->subcoffset = sv_pos_b2u_flags(sv, prog->subcoffset,
2844 SV_GMAGIC|SV_CONST_RETURN);
2846 prog->subcoffset = utf8_length((U8*)strbeg,
2847 (U8*)(strbeg+prog->suboffset));
2851 RX_MATCH_COPY_FREE(rx);
2852 prog->subbeg = strbeg;
2853 prog->suboffset = 0;
2854 prog->subcoffset = 0;
2855 prog->sublen = strend - strbeg;
2863 - regexec_flags - match a regexp against a string
2866 Perl_regexec_flags(pTHX_ REGEXP * const rx, char *stringarg, char *strend,
2867 char *strbeg, SSize_t minend, SV *sv, void *data, U32 flags)
2868 /* stringarg: the point in the string at which to begin matching */
2869 /* strend: pointer to null at end of string */
2870 /* strbeg: real beginning of string */
2871 /* minend: end of match must be >= minend bytes after stringarg. */
2872 /* sv: SV being matched: only used for utf8 flag, pos() etc; string
2873 * itself is accessed via the pointers above */
2874 /* data: May be used for some additional optimizations.
2875 Currently unused. */
2876 /* flags: For optimizations. See REXEC_* in regexp.h */
2879 struct regexp *const prog = ReANY(rx);
2883 SSize_t minlen; /* must match at least this many chars */
2884 SSize_t dontbother = 0; /* how many characters not to try at end */
2885 const bool utf8_target = cBOOL(DO_UTF8(sv));
2887 RXi_GET_DECL(prog,progi);
2888 regmatch_info reginfo_buf; /* create some info to pass to regtry etc */
2889 regmatch_info *const reginfo = ®info_buf;
2890 regexp_paren_pair *swap = NULL;
2892 GET_RE_DEBUG_FLAGS_DECL;
2894 PERL_ARGS_ASSERT_REGEXEC_FLAGS;
2895 PERL_UNUSED_ARG(data);
2897 /* Be paranoid... */
2899 Perl_croak(aTHX_ "NULL regexp parameter");
2903 debug_start_match(rx, utf8_target, stringarg, strend,
2907 startpos = stringarg;
2909 /* set these early as they may be used by the HOP macros below */
2910 reginfo->strbeg = strbeg;
2911 reginfo->strend = strend;
2912 reginfo->is_utf8_target = cBOOL(utf8_target);
2914 if (prog->intflags & PREGf_GPOS_SEEN) {
2917 /* set reginfo->ganch, the position where \G can match */
2920 (flags & REXEC_IGNOREPOS)
2921 ? stringarg /* use start pos rather than pos() */
2922 : ((mg = mg_find_mglob(sv)) && mg->mg_len >= 0)
2923 /* Defined pos(): */
2924 ? strbeg + MgBYTEPOS(mg, sv, strbeg, strend-strbeg)
2925 : strbeg; /* pos() not defined; use start of string */
2927 DEBUG_GPOS_r(Perl_re_printf( aTHX_
2928 "GPOS ganch set to strbeg[%"IVdf"]\n", (IV)(reginfo->ganch - strbeg)));
2930 /* in the presence of \G, we may need to start looking earlier in
2931 * the string than the suggested start point of stringarg:
2932 * if prog->gofs is set, then that's a known, fixed minimum
2935 * /ab|c\G/: gofs = 1
2936 * or if the minimum offset isn't known, then we have to go back
2937 * to the start of the string, e.g. /w+\G/
2940 if (prog->intflags & PREGf_ANCH_GPOS) {
2942 startpos = HOPBACKc(reginfo->ganch, prog->gofs);
2944 ((flags & REXEC_FAIL_ON_UNDERFLOW) && startpos < stringarg))
2946 DEBUG_r(Perl_re_printf( aTHX_
2947 "fail: ganch-gofs before earliest possible start\n"));
2952 startpos = reginfo->ganch;
2954 else if (prog->gofs) {
2955 startpos = HOPBACKc(startpos, prog->gofs);
2959 else if (prog->intflags & PREGf_GPOS_FLOAT)
2963 minlen = prog->minlen;
2964 if ((startpos + minlen) > strend || startpos < strbeg) {
2965 DEBUG_r(Perl_re_printf( aTHX_
2966 "Regex match can't succeed, so not even tried\n"));
2970 /* at the end of this function, we'll do a LEAVE_SCOPE(oldsave),
2971 * which will call destuctors to reset PL_regmatch_state, free higher
2972 * PL_regmatch_slabs, and clean up regmatch_info_aux and
2973 * regmatch_info_aux_eval */
2975 oldsave = PL_savestack_ix;
2979 if ((prog->extflags & RXf_USE_INTUIT)
2980 && !(flags & REXEC_CHECKED))
2982 s = re_intuit_start(rx, sv, strbeg, startpos, strend,
2987 if (prog->extflags & RXf_CHECK_ALL) {
2988 /* we can match based purely on the result of INTUIT.
2989 * Set up captures etc just for $& and $-[0]
2990 * (an intuit-only match wont have $1,$2,..) */
2991 assert(!prog->nparens);
2993 /* s/// doesn't like it if $& is earlier than where we asked it to
2994 * start searching (which can happen on something like /.\G/) */
2995 if ( (flags & REXEC_FAIL_ON_UNDERFLOW)
2998 /* this should only be possible under \G */
2999 assert(prog->intflags & PREGf_GPOS_SEEN);
3000 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
3001 "matched, but failing for REXEC_FAIL_ON_UNDERFLOW\n"));
3005 /* match via INTUIT shouldn't have any captures.
3006 * Let @-, @+, $^N know */
3007 prog->lastparen = prog->lastcloseparen = 0;
3008 RX_MATCH_UTF8_set(rx, utf8_target);
3009 prog->offs[0].start = s - strbeg;
3010 prog->offs[0].end = utf8_target
3011 ? (char*)utf8_hop((U8*)s, prog->minlenret) - strbeg
3012 : s - strbeg + prog->minlenret;
3013 if ( !(flags & REXEC_NOT_FIRST) )
3014 S_reg_set_capture_string(aTHX_ rx,
3016 sv, flags, utf8_target);
3022 multiline = prog->extflags & RXf_PMf_MULTILINE;
3024 if (strend - s < (minlen+(prog->check_offset_min<0?prog->check_offset_min:0))) {
3025 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
3026 "String too short [regexec_flags]...\n"));
3030 /* Check validity of program. */
3031 if (UCHARAT(progi->program) != REG_MAGIC) {
3032 Perl_croak(aTHX_ "corrupted regexp program");
3035 RX_MATCH_TAINTED_off(rx);
3036 RX_MATCH_UTF8_set(rx, utf8_target);
3038 reginfo->prog = rx; /* Yes, sorry that this is confusing. */
3039 reginfo->intuit = 0;
3040 reginfo->is_utf8_pat = cBOOL(RX_UTF8(rx));
3041 reginfo->warned = FALSE;
3043 reginfo->poscache_maxiter = 0; /* not yet started a countdown */
3044 /* see how far we have to get to not match where we matched before */
3045 reginfo->till = stringarg + minend;
3047 if (prog->extflags & RXf_EVAL_SEEN && SvPADTMP(sv)) {
3048 /* SAVEFREESV, not sv_mortalcopy, as this SV must last until after
3049 S_cleanup_regmatch_info_aux has executed (registered by
3050 SAVEDESTRUCTOR_X below). S_cleanup_regmatch_info_aux modifies
3051 magic belonging to this SV.
3052 Not newSVsv, either, as it does not COW.
3054 reginfo->sv = newSV(0);
3055 SvSetSV_nosteal(reginfo->sv, sv);
3056 SAVEFREESV(reginfo->sv);
3059 /* reserve next 2 or 3 slots in PL_regmatch_state:
3060 * slot N+0: may currently be in use: skip it
3061 * slot N+1: use for regmatch_info_aux struct
3062 * slot N+2: use for regmatch_info_aux_eval struct if we have (?{})'s
3063 * slot N+3: ready for use by regmatch()
3067 regmatch_state *old_regmatch_state;
3068 regmatch_slab *old_regmatch_slab;
3069 int i, max = (prog->extflags & RXf_EVAL_SEEN) ? 2 : 1;
3071 /* on first ever match, allocate first slab */
3072 if (!PL_regmatch_slab) {
3073 Newx(PL_regmatch_slab, 1, regmatch_slab);
3074 PL_regmatch_slab->prev = NULL;
3075 PL_regmatch_slab->next = NULL;
3076 PL_regmatch_state = SLAB_FIRST(PL_regmatch_slab);
3079 old_regmatch_state = PL_regmatch_state;
3080 old_regmatch_slab = PL_regmatch_slab;
3082 for (i=0; i <= max; i++) {
3084 reginfo->info_aux = &(PL_regmatch_state->u.info_aux);
3086 reginfo->info_aux_eval =
3087 reginfo->info_aux->info_aux_eval =
3088 &(PL_regmatch_state->u.info_aux_eval);
3090 if (++PL_regmatch_state > SLAB_LAST(PL_regmatch_slab))
3091 PL_regmatch_state = S_push_slab(aTHX);
3094 /* note initial PL_regmatch_state position; at end of match we'll
3095 * pop back to there and free any higher slabs */
3097 reginfo->info_aux->old_regmatch_state = old_regmatch_state;
3098 reginfo->info_aux->old_regmatch_slab = old_regmatch_slab;
3099 reginfo->info_aux->poscache = NULL;
3101 SAVEDESTRUCTOR_X(S_cleanup_regmatch_info_aux, reginfo->info_aux);
3103 if ((prog->extflags & RXf_EVAL_SEEN))
3104 S_setup_eval_state(aTHX_ reginfo);
3106 reginfo->info_aux_eval = reginfo->info_aux->info_aux_eval = NULL;
3109 /* If there is a "must appear" string, look for it. */
3111 if (PL_curpm && (PM_GETRE(PL_curpm) == rx)) {
3112 /* We have to be careful. If the previous successful match
3113 was from this regex we don't want a subsequent partially
3114 successful match to clobber the old results.
3115 So when we detect this possibility we add a swap buffer
3116 to the re, and switch the buffer each match. If we fail,
3117 we switch it back; otherwise we leave it swapped.
3120 /* do we need a save destructor here for eval dies? */
3121 Newxz(prog->offs, (prog->nparens + 1), regexp_paren_pair);
3122 DEBUG_BUFFERS_r(Perl_re_printf( aTHX_
3123 "rex=0x%"UVxf" saving offs: orig=0x%"UVxf" new=0x%"UVxf"\n",
3130 if (prog->recurse_locinput)
3131 Zero(prog->recurse_locinput,prog->nparens + 1, char *);
3133 /* Simplest case: anchored match need be tried only once, or with
3134 * MBOL, only at the beginning of each line.
3136 * Note that /.*.../ sets PREGf_IMPLICIT|MBOL, while /.*.../s sets
3137 * PREGf_IMPLICIT|SBOL. The idea is that with /.*.../s, if it doesn't
3138 * match at the start of the string then it won't match anywhere else
3139 * either; while with /.*.../, if it doesn't match at the beginning,
3140 * the earliest it could match is at the start of the next line */
3142 if (prog->intflags & (PREGf_ANCH & ~PREGf_ANCH_GPOS)) {
3145 if (regtry(reginfo, &s))
3148 if (!(prog->intflags & PREGf_ANCH_MBOL))
3151 /* didn't match at start, try at other newline positions */
3154 dontbother = minlen - 1;
3155 end = HOP3c(strend, -dontbother, strbeg) - 1;
3157 /* skip to next newline */
3159 while (s <= end) { /* note it could be possible to match at the end of the string */
3160 /* NB: newlines are the same in unicode as they are in latin */
3163 if (prog->check_substr || prog->check_utf8) {
3164 /* note that with PREGf_IMPLICIT, intuit can only fail
3165 * or return the start position, so it's of limited utility.
3166 * Nevertheless, I made the decision that the potential for
3167 * quick fail was still worth it - DAPM */
3168 s = re_intuit_start(rx, sv, strbeg, s, strend, flags, NULL);
3172 if (regtry(reginfo, &s))
3176 } /* end anchored search */
3178 if (prog->intflags & PREGf_ANCH_GPOS)
3180 /* PREGf_ANCH_GPOS should never be true if PREGf_GPOS_SEEN is not true */
3181 assert(prog->intflags & PREGf_GPOS_SEEN);
3182 /* For anchored \G, the only position it can match from is
3183 * (ganch-gofs); we already set startpos to this above; if intuit
3184 * moved us on from there, we can't possibly succeed */
3185 assert(startpos == HOPBACKc(reginfo->ganch, prog->gofs));
3186 if (s == startpos && regtry(reginfo, &s))
3191 /* Messy cases: unanchored match. */
3192 if ((prog->anchored_substr || prog->anchored_utf8) && prog->intflags & PREGf_SKIP) {
3193 /* we have /x+whatever/ */
3194 /* it must be a one character string (XXXX Except is_utf8_pat?) */
3200 if (! prog->anchored_utf8) {
3201 to_utf8_substr(prog);
3203 ch = SvPVX_const(prog->anchored_utf8)[0];
3206 DEBUG_EXECUTE_r( did_match = 1 );
3207 if (regtry(reginfo, &s)) goto got_it;
3209 while (s < strend && *s == ch)
3216 if (! prog->anchored_substr) {
3217 if (! to_byte_substr(prog)) {
3218 NON_UTF8_TARGET_BUT_UTF8_REQUIRED(phooey);
3221 ch = SvPVX_const(prog->anchored_substr)[0];
3224 DEBUG_EXECUTE_r( did_match = 1 );
3225 if (regtry(reginfo, &s)) goto got_it;
3227 while (s < strend && *s == ch)
3232 DEBUG_EXECUTE_r(if (!did_match)
3233 Perl_re_printf( aTHX_
3234 "Did not find anchored character...\n")
3237 else if (prog->anchored_substr != NULL
3238 || prog->anchored_utf8 != NULL
3239 || ((prog->float_substr != NULL || prog->float_utf8 != NULL)
3240 && prog->float_max_offset < strend - s)) {
3245 char *last1; /* Last position checked before */
3249 if (prog->anchored_substr || prog->anchored_utf8) {
3251 if (! prog->anchored_utf8) {
3252 to_utf8_substr(prog);
3254 must = prog->anchored_utf8;
3257 if (! prog->anchored_substr) {
3258 if (! to_byte_substr(prog)) {
3259 NON_UTF8_TARGET_BUT_UTF8_REQUIRED(phooey);
3262 must = prog->anchored_substr;
3264 back_max = back_min = prog->anchored_offset;
3267 if (! prog->float_utf8) {
3268 to_utf8_substr(prog);
3270 must = prog->float_utf8;
3273 if (! prog->float_substr) {
3274 if (! to_byte_substr(prog)) {
3275 NON_UTF8_TARGET_BUT_UTF8_REQUIRED(phooey);
3278 must = prog->float_substr;
3280 back_max = prog->float_max_offset;
3281 back_min = prog->float_min_offset;
3287 last = HOP3c(strend, /* Cannot start after this */
3288 -(SSize_t)(CHR_SVLEN(must)
3289 - (SvTAIL(must) != 0) + back_min), strbeg);
3291 if (s > reginfo->strbeg)
3292 last1 = HOPc(s, -1);
3294 last1 = s - 1; /* bogus */
3296 /* XXXX check_substr already used to find "s", can optimize if
3297 check_substr==must. */
3299 strend = HOPc(strend, -dontbother);
3300 while ( (s <= last) &&
3301 (s = fbm_instr((unsigned char*)HOP4c(s, back_min, strbeg, strend),
3302 (unsigned char*)strend, must,
3303 multiline ? FBMrf_MULTILINE : 0)) ) {
3304 DEBUG_EXECUTE_r( did_match = 1 );
3305 if (HOPc(s, -back_max) > last1) {
3306 last1 = HOPc(s, -back_min);
3307 s = HOPc(s, -back_max);
3310 char * const t = (last1 >= reginfo->strbeg)
3311 ? HOPc(last1, 1) : last1 + 1;
3313 last1 = HOPc(s, -back_min);
3317 while (s <= last1) {
3318 if (regtry(reginfo, &s))
3321 s++; /* to break out of outer loop */
3328 while (s <= last1) {
3329 if (regtry(reginfo, &s))
3335 DEBUG_EXECUTE_r(if (!did_match) {
3336 RE_PV_QUOTED_DECL(quoted, utf8_target, PERL_DEBUG_PAD_ZERO(0),
3337 SvPVX_const(must), RE_SV_DUMPLEN(must), 30);
3338 Perl_re_printf( aTHX_ "Did not find %s substr %s%s...\n",
3339 ((must == prog->anchored_substr || must == prog->anchored_utf8)
3340 ? "anchored" : "floating"),
3341 quoted, RE_SV_TAIL(must));
3345 else if ( (c = progi->regstclass) ) {
3347 const OPCODE op = OP(progi->regstclass);
3348 /* don't bother with what can't match */
3349 if (PL_regkind[op] != EXACT && PL_regkind[op] != TRIE)
3350 strend = HOPc(strend, -(minlen - 1));
3353 SV * const prop = sv_newmortal();
3354 regprop(prog, prop, c, reginfo, NULL);
3356 RE_PV_QUOTED_DECL(quoted,utf8_target,PERL_DEBUG_PAD_ZERO(1),
3358 Perl_re_printf( aTHX_
3359 "Matching stclass %.*s against %s (%d bytes)\n",
3360 (int)SvCUR(prop), SvPVX_const(prop),
3361 quoted, (int)(strend - s));
3364 if (find_byclass(prog, c, s, strend, reginfo))
3366 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_ "Contradicts stclass... [regexec_flags]\n"));
3370 if (prog->float_substr != NULL || prog->float_utf8 != NULL) {
3378 if (! prog->float_utf8) {
3379 to_utf8_substr(prog);
3381 float_real = prog->float_utf8;
3384 if (! prog->float_substr) {
3385 if (! to_byte_substr(prog)) {
3386 NON_UTF8_TARGET_BUT_UTF8_REQUIRED(phooey);
3389 float_real = prog->float_substr;
3392 little = SvPV_const(float_real, len);
3393 if (SvTAIL(float_real)) {
3394 /* This means that float_real contains an artificial \n on
3395 * the end due to the presence of something like this:
3396 * /foo$/ where we can match both "foo" and "foo\n" at the
3397 * end of the string. So we have to compare the end of the
3398 * string first against the float_real without the \n and
3399 * then against the full float_real with the string. We
3400 * have to watch out for cases where the string might be
3401 * smaller than the float_real or the float_real without
3403 char *checkpos= strend - len;
3405 Perl_re_printf( aTHX_
3406 "%sChecking for float_real.%s\n",
3407 PL_colors[4], PL_colors[5]));
3408 if (checkpos + 1 < strbeg) {
3409 /* can't match, even if we remove the trailing \n
3410 * string is too short to match */
3412 Perl_re_printf( aTHX_
3413 "%sString shorter than required trailing substring, cannot match.%s\n",
3414 PL_colors[4], PL_colors[5]));
3416 } else if (memEQ(checkpos + 1, little, len - 1)) {
3417 /* can match, the end of the string matches without the
3419 last = checkpos + 1;
3420 } else if (checkpos < strbeg) {
3421 /* cant match, string is too short when the "\n" is
3424 Perl_re_printf( aTHX_
3425 "%sString does not contain required trailing substring, cannot match.%s\n",
3426 PL_colors[4], PL_colors[5]));
3428 } else if (!multiline) {
3429 /* non multiline match, so compare with the "\n" at the
3430 * end of the string */
3431 if (memEQ(checkpos, little, len)) {
3435 Perl_re_printf( aTHX_
3436 "%sString does not contain required trailing substring, cannot match.%s\n",
3437 PL_colors[4], PL_colors[5]));
3441 /* multiline match, so we have to search for a place
3442 * where the full string is located */
3448 last = rninstr(s, strend, little, little + len);
3450 last = strend; /* matching "$" */
3453 /* at one point this block contained a comment which was
3454 * probably incorrect, which said that this was a "should not
3455 * happen" case. Even if it was true when it was written I am
3456 * pretty sure it is not anymore, so I have removed the comment
3457 * and replaced it with this one. Yves */
3459 Perl_re_printf( aTHX_
3460 "%sString does not contain required substring, cannot match.%s\n",
3461 PL_colors[4], PL_colors[5]
3465 dontbother = strend - last + prog->float_min_offset;
3467 if (minlen && (dontbother < minlen))
3468 dontbother = minlen - 1;
3469 strend -= dontbother; /* this one's always in bytes! */
3470 /* We don't know much -- general case. */
3473 if (regtry(reginfo, &s))
3482 if (regtry(reginfo, &s))
3484 } while (s++ < strend);
3492 /* s/// doesn't like it if $& is earlier than where we asked it to
3493 * start searching (which can happen on something like /.\G/) */
3494 if ( (flags & REXEC_FAIL_ON_UNDERFLOW)
3495 && (prog->offs[0].start < stringarg - strbeg))
3497 /* this should only be possible under \G */
3498 assert(prog->intflags & PREGf_GPOS_SEEN);
3499 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
3500 "matched, but failing for REXEC_FAIL_ON_UNDERFLOW\n"));
3506 Perl_re_printf( aTHX_
3507 "rex=0x%"UVxf" freeing offs: 0x%"UVxf"\n",
3514 /* clean up; this will trigger destructors that will free all slabs
3515 * above the current one, and cleanup the regmatch_info_aux
3516 * and regmatch_info_aux_eval sructs */
3518 LEAVE_SCOPE(oldsave);
3520 if (RXp_PAREN_NAMES(prog))
3521 (void)hv_iterinit(RXp_PAREN_NAMES(prog));
3523 /* make sure $`, $&, $', and $digit will work later */
3524 if ( !(flags & REXEC_NOT_FIRST) )
3525 S_reg_set_capture_string(aTHX_ rx,
3526 strbeg, reginfo->strend,
3527 sv, flags, utf8_target);
3532 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_ "%sMatch failed%s\n",
3533 PL_colors[4], PL_colors[5]));
3535 /* clean up; this will trigger destructors that will free all slabs
3536 * above the current one, and cleanup the regmatch_info_aux
3537 * and regmatch_info_aux_eval sructs */
3539 LEAVE_SCOPE(oldsave);
3542 /* we failed :-( roll it back */
3543 DEBUG_BUFFERS_r(Perl_re_printf( aTHX_
3544 "rex=0x%"UVxf" rolling back offs: freeing=0x%"UVxf" restoring=0x%"UVxf"\n",
3549 Safefree(prog->offs);
3556 /* Set which rex is pointed to by PL_reg_curpm, handling ref counting.
3557 * Do inc before dec, in case old and new rex are the same */
3558 #define SET_reg_curpm(Re2) \
3559 if (reginfo->info_aux_eval) { \
3560 (void)ReREFCNT_inc(Re2); \
3561 ReREFCNT_dec(PM_GETRE(PL_reg_curpm)); \
3562 PM_SETRE((PL_reg_curpm), (Re2)); \
3567 - regtry - try match at specific point
3569 STATIC bool /* 0 failure, 1 success */
3570 S_regtry(pTHX_ regmatch_info *reginfo, char **startposp)
3573 REGEXP *const rx = reginfo->prog;
3574 regexp *const prog = ReANY(rx);
3577 U32 depth = 0; /* used by REGCP_SET */
3579 RXi_GET_DECL(prog,progi);
3580 GET_RE_DEBUG_FLAGS_DECL;
3582 PERL_ARGS_ASSERT_REGTRY;
3584 reginfo->cutpoint=NULL;
3586 prog->offs[0].start = *startposp - reginfo->strbeg;
3587 prog->lastparen = 0;
3588 prog->lastcloseparen = 0;
3590 /* XXXX What this code is doing here?!!! There should be no need
3591 to do this again and again, prog->lastparen should take care of
3594 /* Tests pat.t#187 and split.t#{13,14} seem to depend on this code.
3595 * Actually, the code in regcppop() (which Ilya may be meaning by
3596 * prog->lastparen), is not needed at all by the test suite
3597 * (op/regexp, op/pat, op/split), but that code is needed otherwise
3598 * this erroneously leaves $1 defined: "1" =~ /^(?:(\d)x)?\d$/
3599 * Meanwhile, this code *is* needed for the
3600 * above-mentioned test suite tests to succeed. The common theme
3601 * on those tests seems to be returning null fields from matches.
3602 * --jhi updated by dapm */
3604 if (prog->nparens) {
3605 regexp_paren_pair *pp = prog->offs;
3607 for (i = prog->nparens; i > (I32)prog->lastparen; i--) {
3615 result = regmatch(reginfo, *startposp, progi->program + 1);
3617 prog->offs[0].end = result;
3620 if (reginfo->cutpoint)
3621 *startposp= reginfo->cutpoint;
3622 REGCP_UNWIND(lastcp);
3627 #define sayYES goto yes
3628 #define sayNO goto no
3629 #define sayNO_SILENT goto no_silent
3631 /* we dont use STMT_START/END here because it leads to
3632 "unreachable code" warnings, which are bogus, but distracting. */
3633 #define CACHEsayNO \
3634 if (ST.cache_mask) \
3635 reginfo->info_aux->poscache[ST.cache_offset] |= ST.cache_mask; \
3638 /* this is used to determine how far from the left messages like
3639 'failed...' are printed in regexec.c. It should be set such that
3640 messages are inline with the regop output that created them.
3642 #define REPORT_CODE_OFF 29
3643 #define INDENT_CHARS(depth) ((depth) % 20)
3646 Perl_re_exec_indentf(pTHX_ const char *fmt, U32 depth, ...)
3650 PerlIO *f= Perl_debug_log;
3651 PERL_ARGS_ASSERT_RE_EXEC_INDENTF;
3652 va_start(ap, depth);
3653 PerlIO_printf(f, "%*s|%4d| %*s", REPORT_CODE_OFF, "", depth, INDENT_CHARS(depth), "" );
3654 result = PerlIO_vprintf(f, fmt, ap);
3658 #endif /* DEBUGGING */
3661 #define CHRTEST_UNINIT -1001 /* c1/c2 haven't been calculated yet */
3662 #define CHRTEST_VOID -1000 /* the c1/c2 "next char" test should be skipped */
3663 #define CHRTEST_NOT_A_CP_1 -999
3664 #define CHRTEST_NOT_A_CP_2 -998
3666 /* grab a new slab and return the first slot in it */
3668 STATIC regmatch_state *
3671 #if PERL_VERSION < 9 && !defined(PERL_CORE)
3674 regmatch_slab *s = PL_regmatch_slab->next;
3676 Newx(s, 1, regmatch_slab);
3677 s->prev = PL_regmatch_slab;
3679 PL_regmatch_slab->next = s;
3681 PL_regmatch_slab = s;
3682 return SLAB_FIRST(s);
3686 /* push a new state then goto it */
3688 #define PUSH_STATE_GOTO(state, node, input) \
3689 pushinput = input; \
3691 st->resume_state = state; \
3694 /* push a new state with success backtracking, then goto it */
3696 #define PUSH_YES_STATE_GOTO(state, node, input) \
3697 pushinput = input; \
3699 st->resume_state = state; \
3700 goto push_yes_state;
3707 regmatch() - main matching routine
3709 This is basically one big switch statement in a loop. We execute an op,
3710 set 'next' to point the next op, and continue. If we come to a point which
3711 we may need to backtrack to on failure such as (A|B|C), we push a
3712 backtrack state onto the backtrack stack. On failure, we pop the top
3713 state, and re-enter the loop at the state indicated. If there are no more
3714 states to pop, we return failure.
3716 Sometimes we also need to backtrack on success; for example /A+/, where
3717 after successfully matching one A, we need to go back and try to
3718 match another one; similarly for lookahead assertions: if the assertion
3719 completes successfully, we backtrack to the state just before the assertion
3720 and then carry on. In these cases, the pushed state is marked as
3721 'backtrack on success too'. This marking is in fact done by a chain of
3722 pointers, each pointing to the previous 'yes' state. On success, we pop to
3723 the nearest yes state, discarding any intermediate failure-only states.
3724 Sometimes a yes state is pushed just to force some cleanup code to be
3725 called at the end of a successful match or submatch; e.g. (??{$re}) uses
3726 it to free the inner regex.
3728 Note that failure backtracking rewinds the cursor position, while
3729 success backtracking leaves it alone.
3731 A pattern is complete when the END op is executed, while a subpattern
3732 such as (?=foo) is complete when the SUCCESS op is executed. Both of these
3733 ops trigger the "pop to last yes state if any, otherwise return true"
3736 A common convention in this function is to use A and B to refer to the two
3737 subpatterns (or to the first nodes thereof) in patterns like /A*B/: so A is
3738 the subpattern to be matched possibly multiple times, while B is the entire
3739 rest of the pattern. Variable and state names reflect this convention.
3741 The states in the main switch are the union of ops and failure/success of
3742 substates associated with with that op. For example, IFMATCH is the op
3743 that does lookahead assertions /(?=A)B/ and so the IFMATCH state means
3744 'execute IFMATCH'; while IFMATCH_A is a state saying that we have just
3745 successfully matched A and IFMATCH_A_fail is a state saying that we have
3746 just failed to match A. Resume states always come in pairs. The backtrack
3747 state we push is marked as 'IFMATCH_A', but when that is popped, we resume
3748 at IFMATCH_A or IFMATCH_A_fail, depending on whether we are backtracking
3749 on success or failure.
3751 The struct that holds a backtracking state is actually a big union, with
3752 one variant for each major type of op. The variable st points to the
3753 top-most backtrack struct. To make the code clearer, within each
3754 block of code we #define ST to alias the relevant union.
3756 Here's a concrete example of a (vastly oversimplified) IFMATCH
3762 #define ST st->u.ifmatch
3764 case IFMATCH: // we are executing the IFMATCH op, (?=A)B
3765 ST.foo = ...; // some state we wish to save
3767 // push a yes backtrack state with a resume value of
3768 // IFMATCH_A/IFMATCH_A_fail, then continue execution at the
3770 PUSH_YES_STATE_GOTO(IFMATCH_A, A, newinput);
3773 case IFMATCH_A: // we have successfully executed A; now continue with B
3775 bar = ST.foo; // do something with the preserved value
3778 case IFMATCH_A_fail: // A failed, so the assertion failed
3779 ...; // do some housekeeping, then ...
3780 sayNO; // propagate the failure
3787 For any old-timers reading this who are familiar with the old recursive
3788 approach, the code above is equivalent to:
3790 case IFMATCH: // we are executing the IFMATCH op, (?=A)B
3799 ...; // do some housekeeping, then ...
3800 sayNO; // propagate the failure
3803 The topmost backtrack state, pointed to by st, is usually free. If you
3804 want to claim it, populate any ST.foo fields in it with values you wish to
3805 save, then do one of
3807 PUSH_STATE_GOTO(resume_state, node, newinput);
3808 PUSH_YES_STATE_GOTO(resume_state, node, newinput);
3810 which sets that backtrack state's resume value to 'resume_state', pushes a
3811 new free entry to the top of the backtrack stack, then goes to 'node'.
3812 On backtracking, the free slot is popped, and the saved state becomes the
3813 new free state. An ST.foo field in this new top state can be temporarily
3814 accessed to retrieve values, but once the main loop is re-entered, it
3815 becomes available for reuse.
3817 Note that the depth of the backtrack stack constantly increases during the
3818 left-to-right execution of the pattern, rather than going up and down with
3819 the pattern nesting. For example the stack is at its maximum at Z at the
3820 end of the pattern, rather than at X in the following:
3822 /(((X)+)+)+....(Y)+....Z/
3824 The only exceptions to this are lookahead/behind assertions and the cut,
3825 (?>A), which pop all the backtrack states associated with A before
3828 Backtrack state structs are allocated in slabs of about 4K in size.
3829 PL_regmatch_state and st always point to the currently active state,
3830 and PL_regmatch_slab points to the slab currently containing
3831 PL_regmatch_state. The first time regmatch() is called, the first slab is
3832 allocated, and is never freed until interpreter destruction. When the slab
3833 is full, a new one is allocated and chained to the end. At exit from
3834 regmatch(), slabs allocated since entry are freed.
3839 #define DEBUG_STATE_pp(pp) \
3841 DUMP_EXEC_POS(locinput, scan, utf8_target,depth); \
3842 Perl_re_printf( aTHX_ \
3843 "%*s" pp " %s%s%s%s%s\n", \
3844 INDENT_CHARS(depth), "", \
3845 PL_reg_name[st->resume_state], \
3846 ((st==yes_state||st==mark_state) ? "[" : ""), \
3847 ((st==yes_state) ? "Y" : ""), \
3848 ((st==mark_state) ? "M" : ""), \
3849 ((st==yes_state||st==mark_state) ? "]" : "") \
3854 #define REG_NODE_NUM(x) ((x) ? (int)((x)-prog) : -1)
3859 S_debug_start_match(pTHX_ const REGEXP *prog, const bool utf8_target,
3860 const char *start, const char *end, const char *blurb)
3862 const bool utf8_pat = RX_UTF8(prog) ? 1 : 0;
3864 PERL_ARGS_ASSERT_DEBUG_START_MATCH;
3869 RE_PV_QUOTED_DECL(s0, utf8_pat, PERL_DEBUG_PAD_ZERO(0),
3870 RX_PRECOMP_const(prog), RX_PRELEN(prog), 60);
3872 RE_PV_QUOTED_DECL(s1, utf8_target, PERL_DEBUG_PAD_ZERO(1),
3873 start, end - start, 60);
3875 Perl_re_printf( aTHX_
3876 "%s%s REx%s %s against %s\n",
3877 PL_colors[4], blurb, PL_colors[5], s0, s1);
3879 if (utf8_target||utf8_pat)
3880 Perl_re_printf( aTHX_ "UTF-8 %s%s%s...\n",
3881 utf8_pat ? "pattern" : "",
3882 utf8_pat && utf8_target ? " and " : "",
3883 utf8_target ? "string" : ""
3889 S_dump_exec_pos(pTHX_ const char *locinput,
3890 const regnode *scan,
3891 const char *loc_regeol,
3892 const char *loc_bostr,
3893 const char *loc_reg_starttry,
3894 const bool utf8_target,
3898 const int docolor = *PL_colors[0] || *PL_colors[2] || *PL_colors[4];
3899 const int taill = (docolor ? 10 : 7); /* 3 chars for "> <" */
3900 int l = (loc_regeol - locinput) > taill ? taill : (loc_regeol - locinput);
3901 /* The part of the string before starttry has one color
3902 (pref0_len chars), between starttry and current
3903 position another one (pref_len - pref0_len chars),
3904 after the current position the third one.
3905 We assume that pref0_len <= pref_len, otherwise we
3906 decrease pref0_len. */
3907 int pref_len = (locinput - loc_bostr) > (5 + taill) - l
3908 ? (5 + taill) - l : locinput - loc_bostr;
3911 PERL_ARGS_ASSERT_DUMP_EXEC_POS;
3913 while (utf8_target && UTF8_IS_CONTINUATION(*(U8*)(locinput - pref_len)))
3915 pref0_len = pref_len - (locinput - loc_reg_starttry);
3916 if (l + pref_len < (5 + taill) && l < loc_regeol - locinput)
3917 l = ( loc_regeol - locinput > (5 + taill) - pref_len
3918 ? (5 + taill) - pref_len : loc_regeol - locinput);
3919 while (utf8_target && UTF8_IS_CONTINUATION(*(U8*)(locinput + l)))
3923 if (pref0_len > pref_len)
3924 pref0_len = pref_len;
3926 const int is_uni = utf8_target ? 1 : 0;
3928 RE_PV_COLOR_DECL(s0,len0,is_uni,PERL_DEBUG_PAD(0),
3929 (locinput - pref_len),pref0_len, 60, 4, 5);
3931 RE_PV_COLOR_DECL(s1,len1,is_uni,PERL_DEBUG_PAD(1),
3932 (locinput - pref_len + pref0_len),
3933 pref_len - pref0_len, 60, 2, 3);
3935 RE_PV_COLOR_DECL(s2,len2,is_uni,PERL_DEBUG_PAD(2),
3936 locinput, loc_regeol - locinput, 10, 0, 1);
3938 const STRLEN tlen=len0+len1+len2;
3939 Perl_re_printf( aTHX_
3940 "%4"IVdf" <%.*s%.*s%s%.*s>%*s|%4u| ",
3941 (IV)(locinput - loc_bostr),
3944 (docolor ? "" : "> <"),
3946 (int)(tlen > 19 ? 0 : 19 - tlen),
3954 /* reg_check_named_buff_matched()
3955 * Checks to see if a named buffer has matched. The data array of
3956 * buffer numbers corresponding to the buffer is expected to reside
3957 * in the regexp->data->data array in the slot stored in the ARG() of
3958 * node involved. Note that this routine doesn't actually care about the
3959 * name, that information is not preserved from compilation to execution.
3960 * Returns the index of the leftmost defined buffer with the given name
3961 * or 0 if non of the buffers matched.
3964 S_reg_check_named_buff_matched(const regexp *rex, const regnode *scan)
3967 RXi_GET_DECL(rex,rexi);
3968 SV *sv_dat= MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
3969 I32 *nums=(I32*)SvPVX(sv_dat);
3971 PERL_ARGS_ASSERT_REG_CHECK_NAMED_BUFF_MATCHED;
3973 for ( n=0; n<SvIVX(sv_dat); n++ ) {
3974 if ((I32)rex->lastparen >= nums[n] &&
3975 rex->offs[nums[n]].end != -1)
3985 S_setup_EXACTISH_ST_c1_c2(pTHX_ const regnode * const text_node, int *c1p,
3986 U8* c1_utf8, int *c2p, U8* c2_utf8, regmatch_info *reginfo)
3988 /* This function determines if there are one or two characters that match
3989 * the first character of the passed-in EXACTish node <text_node>, and if
3990 * so, returns them in the passed-in pointers.
3992 * If it determines that no possible character in the target string can
3993 * match, it returns FALSE; otherwise TRUE. (The FALSE situation occurs if
3994 * the first character in <text_node> requires UTF-8 to represent, and the
3995 * target string isn't in UTF-8.)
3997 * If there are more than two characters that could match the beginning of
3998 * <text_node>, or if more context is required to determine a match or not,
3999 * it sets both *<c1p> and *<c2p> to CHRTEST_VOID.
4001 * The motiviation behind this function is to allow the caller to set up
4002 * tight loops for matching. If <text_node> is of type EXACT, there is
4003 * only one possible character that can match its first character, and so
4004 * the situation is quite simple. But things get much more complicated if
4005 * folding is involved. It may be that the first character of an EXACTFish
4006 * node doesn't participate in any possible fold, e.g., punctuation, so it
4007 * can be matched only by itself. The vast majority of characters that are
4008 * in folds match just two things, their lower and upper-case equivalents.
4009 * But not all are like that; some have multiple possible matches, or match
4010 * sequences of more than one character. This function sorts all that out.
4012 * Consider the patterns A*B or A*?B where A and B are arbitrary. In a
4013 * loop of trying to match A*, we know we can't exit where the thing
4014 * following it isn't a B. And something can't be a B unless it is the
4015 * beginning of B. By putting a quick test for that beginning in a tight
4016 * loop, we can rule out things that can't possibly be B without having to
4017 * break out of the loop, thus avoiding work. Similarly, if A is a single
4018 * character, we can make a tight loop matching A*, using the outputs of
4021 * If the target string to match isn't in UTF-8, and there aren't
4022 * complications which require CHRTEST_VOID, *<c1p> and *<c2p> are set to
4023 * the one or two possible octets (which are characters in this situation)
4024 * that can match. In all cases, if there is only one character that can
4025 * match, *<c1p> and *<c2p> will be identical.
4027 * If the target string is in UTF-8, the buffers pointed to by <c1_utf8>
4028 * and <c2_utf8> will contain the one or two UTF-8 sequences of bytes that
4029 * can match the beginning of <text_node>. They should be declared with at
4030 * least length UTF8_MAXBYTES+1. (If the target string isn't in UTF-8, it is
4031 * undefined what these contain.) If one or both of the buffers are
4032 * invariant under UTF-8, *<c1p>, and *<c2p> will also be set to the
4033 * corresponding invariant. If variant, the corresponding *<c1p> and/or
4034 * *<c2p> will be set to a negative number(s) that shouldn't match any code
4035 * point (unless inappropriately coerced to unsigned). *<c1p> will equal
4036 * *<c2p> if and only if <c1_utf8> and <c2_utf8> are the same. */
4038 const bool utf8_target = reginfo->is_utf8_target;
4040 UV c1 = (UV)CHRTEST_NOT_A_CP_1;
4041 UV c2 = (UV)CHRTEST_NOT_A_CP_2;
4042 bool use_chrtest_void = FALSE;
4043 const bool is_utf8_pat = reginfo->is_utf8_pat;
4045 /* Used when we have both utf8 input and utf8 output, to avoid converting
4046 * to/from code points */
4047 bool utf8_has_been_setup = FALSE;
4051 U8 *pat = (U8*)STRING(text_node);
4052 U8 folded[UTF8_MAX_FOLD_CHAR_EXPAND * UTF8_MAXBYTES_CASE + 1] = { '\0' };
4054 if (OP(text_node) == EXACT || OP(text_node) == EXACTL) {
4056 /* In an exact node, only one thing can be matched, that first
4057 * character. If both the pat and the target are UTF-8, we can just
4058 * copy the input to the output, avoiding finding the code point of
4063 else if (utf8_target) {
4064 Copy(pat, c1_utf8, UTF8SKIP(pat), U8);
4065 Copy(pat, c2_utf8, UTF8SKIP(pat), U8);
4066 utf8_has_been_setup = TRUE;
4069 c2 = c1 = valid_utf8_to_uvchr(pat, NULL);
4072 else { /* an EXACTFish node */
4073 U8 *pat_end = pat + STR_LEN(text_node);
4075 /* An EXACTFL node has at least some characters unfolded, because what
4076 * they match is not known until now. So, now is the time to fold
4077 * the first few of them, as many as are needed to determine 'c1' and
4078 * 'c2' later in the routine. If the pattern isn't UTF-8, we only need
4079 * to fold if in a UTF-8 locale, and then only the Sharp S; everything
4080 * else is 1-1 and isn't assumed to be folded. In a UTF-8 pattern, we
4081 * need to fold as many characters as a single character can fold to,
4082 * so that later we can check if the first ones are such a multi-char
4083 * fold. But, in such a pattern only locale-problematic characters
4084 * aren't folded, so we can skip this completely if the first character
4085 * in the node isn't one of the tricky ones */
4086 if (OP(text_node) == EXACTFL) {
4088 if (! is_utf8_pat) {
4089 if (IN_UTF8_CTYPE_LOCALE && *pat == LATIN_SMALL_LETTER_SHARP_S)
4091 folded[0] = folded[1] = 's';
4093 pat_end = folded + 2;
4096 else if (is_PROBLEMATIC_LOCALE_FOLDEDS_START_utf8(pat)) {
4101 for (i = 0; i < UTF8_MAX_FOLD_CHAR_EXPAND && s < pat_end; i++) {
4103 *(d++) = (U8) toFOLD_LC(*s);
4108 _to_utf8_fold_flags(s,
4111 FOLD_FLAGS_FULL | FOLD_FLAGS_LOCALE);
4122 if ((is_utf8_pat && is_MULTI_CHAR_FOLD_utf8_safe(pat, pat_end))
4123 || (!is_utf8_pat && is_MULTI_CHAR_FOLD_latin1_safe(pat, pat_end)))
4125 /* Multi-character folds require more context to sort out. Also
4126 * PL_utf8_foldclosures used below doesn't handle them, so have to
4127 * be handled outside this routine */
4128 use_chrtest_void = TRUE;
4130 else { /* an EXACTFish node which doesn't begin with a multi-char fold */
4131 c1 = is_utf8_pat ? valid_utf8_to_uvchr(pat, NULL) : *pat;
4133 /* Load the folds hash, if not already done */
4135 if (! PL_utf8_foldclosures) {
4136 _load_PL_utf8_foldclosures();
4139 /* The fold closures data structure is a hash with the keys
4140 * being the UTF-8 of every character that is folded to, like
4141 * 'k', and the values each an array of all code points that
4142 * fold to its key. e.g. [ 'k', 'K', KELVIN_SIGN ].
4143 * Multi-character folds are not included */
4144 if ((! (listp = hv_fetch(PL_utf8_foldclosures,
4149 /* Not found in the hash, therefore there are no folds
4150 * containing it, so there is only a single character that
4154 else { /* Does participate in folds */
4155 AV* list = (AV*) *listp;
4156 if (av_tindex_nomg(list) != 1) {
4158 /* If there aren't exactly two folds to this, it is
4159 * outside the scope of this function */
4160 use_chrtest_void = TRUE;
4162 else { /* There are two. Get them */
4163 SV** c_p = av_fetch(list, 0, FALSE);
4165 Perl_croak(aTHX_ "panic: invalid PL_utf8_foldclosures structure");
4169 c_p = av_fetch(list, 1, FALSE);
4171 Perl_croak(aTHX_ "panic: invalid PL_utf8_foldclosures structure");
4175 /* Folds that cross the 255/256 boundary are forbidden
4176 * if EXACTFL (and isnt a UTF8 locale), or EXACTFA and
4177 * one is ASCIII. Since the pattern character is above
4178 * 255, and its only other match is below 256, the only
4179 * legal match will be to itself. We have thrown away
4180 * the original, so have to compute which is the one
4182 if ((c1 < 256) != (c2 < 256)) {
4183 if ((OP(text_node) == EXACTFL
4184 && ! IN_UTF8_CTYPE_LOCALE)
4185 || ((OP(text_node) == EXACTFA
4186 || OP(text_node) == EXACTFA_NO_TRIE)
4187 && (isASCII(c1) || isASCII(c2))))
4200 else /* Here, c1 is <= 255 */
4202 && HAS_NONLATIN1_FOLD_CLOSURE(c1)
4203 && ( ! (OP(text_node) == EXACTFL && ! IN_UTF8_CTYPE_LOCALE))
4204 && ((OP(text_node) != EXACTFA
4205 && OP(text_node) != EXACTFA_NO_TRIE)
4208 /* Here, there could be something above Latin1 in the target
4209 * which folds to this character in the pattern. All such
4210 * cases except LATIN SMALL LETTER Y WITH DIAERESIS have more
4211 * than two characters involved in their folds, so are outside
4212 * the scope of this function */
4213 if (UNLIKELY(c1 == LATIN_SMALL_LETTER_Y_WITH_DIAERESIS)) {
4214 c2 = LATIN_CAPITAL_LETTER_Y_WITH_DIAERESIS;
4217 use_chrtest_void = TRUE;
4220 else { /* Here nothing above Latin1 can fold to the pattern
4222 switch (OP(text_node)) {
4224 case EXACTFL: /* /l rules */
4225 c2 = PL_fold_locale[c1];
4228 case EXACTF: /* This node only generated for non-utf8
4230 assert(! is_utf8_pat);
4231 if (! utf8_target) { /* /d rules */
4236 /* /u rules for all these. This happens to work for
4237 * EXACTFA as nothing in Latin1 folds to ASCII */
4238 case EXACTFA_NO_TRIE: /* This node only generated for
4239 non-utf8 patterns */
4240 assert(! is_utf8_pat);
4245 c2 = PL_fold_latin1[c1];
4249 Perl_croak(aTHX_ "panic: Unexpected op %u", OP(text_node));
4250 NOT_REACHED; /* NOTREACHED */
4256 /* Here have figured things out. Set up the returns */
4257 if (use_chrtest_void) {
4258 *c2p = *c1p = CHRTEST_VOID;
4260 else if (utf8_target) {
4261 if (! utf8_has_been_setup) { /* Don't have the utf8; must get it */
4262 uvchr_to_utf8(c1_utf8, c1);
4263 uvchr_to_utf8(c2_utf8, c2);
4266 /* Invariants are stored in both the utf8 and byte outputs; Use
4267 * negative numbers otherwise for the byte ones. Make sure that the
4268 * byte ones are the same iff the utf8 ones are the same */
4269 *c1p = (UTF8_IS_INVARIANT(*c1_utf8)) ? *c1_utf8 : CHRTEST_NOT_A_CP_1;
4270 *c2p = (UTF8_IS_INVARIANT(*c2_utf8))
4273 ? CHRTEST_NOT_A_CP_1
4274 : CHRTEST_NOT_A_CP_2;
4276 else if (c1 > 255) {
4277 if (c2 > 255) { /* both possibilities are above what a non-utf8 string
4282 *c1p = *c2p = c2; /* c2 is the only representable value */
4284 else { /* c1 is representable; see about c2 */
4286 *c2p = (c2 < 256) ? c2 : c1;
4292 PERL_STATIC_INLINE bool
4293 S_isGCB(const GCB_enum before, const GCB_enum after)
4295 /* returns a boolean indicating if there is a Grapheme Cluster Boundary
4296 * between the inputs. See http://www.unicode.org/reports/tr29/ */
4298 return GCB_table[before][after];
4301 /* Combining marks attach to most classes that precede them, but this defines
4302 * the exceptions (from TR14) */
4303 #define LB_CM_ATTACHES_TO(prev) ( ! ( prev == LB_EDGE \
4304 || prev == LB_Mandatory_Break \
4305 || prev == LB_Carriage_Return \
4306 || prev == LB_Line_Feed \
4307 || prev == LB_Next_Line \
4308 || prev == LB_Space \
4309 || prev == LB_ZWSpace))
4312 S_isLB(pTHX_ LB_enum before,
4314 const U8 * const strbeg,
4315 const U8 * const curpos,
4316 const U8 * const strend,
4317 const bool utf8_target)
4319 U8 * temp_pos = (U8 *) curpos;
4320 LB_enum prev = before;
4322 /* Is the boundary between 'before' and 'after' line-breakable?
4323 * Most of this is just a table lookup of a generated table from Unicode
4324 * rules. But some rules require context to decide, and so have to be
4325 * implemented in code */
4327 PERL_ARGS_ASSERT_ISLB;
4329 /* Rule numbers in the comments below are as of Unicode 8.0 */
4333 switch (LB_table[before][after]) {
4338 case LB_NOBREAK_EVEN_WITH_SP_BETWEEN:
4341 case LB_SP_foo + LB_BREAKABLE:
4342 case LB_SP_foo + LB_NOBREAK:
4343 case LB_SP_foo + LB_NOBREAK_EVEN_WITH_SP_BETWEEN:
4345 /* When we have something following a SP, we have to look at the
4346 * context in order to know what to do.
4348 * SP SP should not reach here because LB7: Do not break before
4349 * spaces. (For two spaces in a row there is nothing that
4350 * overrides that) */
4351 assert(after != LB_Space);
4353 /* Here we have a space followed by a non-space. Mostly this is a
4354 * case of LB18: "Break after spaces". But there are complications
4355 * as the handling of spaces is somewhat tricky. They are in a
4356 * number of rules, which have to be applied in priority order, but
4357 * something earlier in the string can cause a rule to be skipped
4358 * and a lower priority rule invoked. A prime example is LB7 which
4359 * says don't break before a space. But rule LB8 (lower priority)
4360 * says that the first break opportunity after a ZW is after any
4361 * span of spaces immediately after it. If a ZW comes before a SP
4362 * in the input, rule LB8 applies, and not LB7. Other such rules
4363 * involve combining marks which are rules 9 and 10, but they may
4364 * override higher priority rules if they come earlier in the
4365 * string. Since we're doing random access into the middle of the
4366 * string, we have to look for rules that should get applied based
4367 * on both string position and priority. Combining marks do not
4368 * attach to either ZW nor SP, so we don't have to consider them
4371 * To check for LB8, we have to find the first non-space character
4372 * before this span of spaces */
4374 prev = backup_one_LB(strbeg, &temp_pos, utf8_target);
4376 while (prev == LB_Space);
4378 /* LB8 Break before any character following a zero-width space,
4379 * even if one or more spaces intervene.
4381 * So if we have a ZW just before this span, and to get here this
4382 * is the final space in the span. */
4383 if (prev == LB_ZWSpace) {
4387 /* Here, not ZW SP+. There are several rules that have higher
4388 * priority than LB18 and can be resolved now, as they don't depend
4389 * on anything earlier in the string (except ZW, which we have
4390 * already handled). One of these rules is LB11 Do not break
4391 * before Word joiner, but we have specially encoded that in the
4392 * lookup table so it is caught by the single test below which
4393 * catches the other ones. */
4394 if (LB_table[LB_Space][after] - LB_SP_foo
4395 == LB_NOBREAK_EVEN_WITH_SP_BETWEEN)
4400 /* If we get here, we have to XXX consider combining marks. */
4401 if (prev == LB_Combining_Mark) {
4403 /* What happens with these depends on the character they
4406 prev = backup_one_LB(strbeg, &temp_pos, utf8_target);
4408 while (prev == LB_Combining_Mark);
4410 /* Most times these attach to and inherit the characteristics
4411 * of that character, but not always, and when not, they are to
4412 * be treated as AL by rule LB10. */
4413 if (! LB_CM_ATTACHES_TO(prev)) {
4414 prev = LB_Alphabetic;
4418 /* Here, we have the character preceding the span of spaces all set
4419 * up. We follow LB18: "Break after spaces" unless the table shows
4420 * that is overriden */
4421 return LB_table[prev][after] != LB_NOBREAK_EVEN_WITH_SP_BETWEEN;
4425 /* We don't know how to treat the CM except by looking at the first
4426 * non-CM character preceding it */
4428 prev = backup_one_LB(strbeg, &temp_pos, utf8_target);
4430 while (prev == LB_Combining_Mark);
4432 /* Here, 'prev' is that first earlier non-CM character. If the CM
4433 * attatches to it, then it inherits the behavior of 'prev'. If it
4434 * doesn't attach, it is to be treated as an AL */
4435 if (! LB_CM_ATTACHES_TO(prev)) {
4436 prev = LB_Alphabetic;
4441 case LB_HY_or_BA_then_foo + LB_BREAKABLE:
4442 case LB_HY_or_BA_then_foo + LB_NOBREAK:
4444 /* LB21a Don't break after Hebrew + Hyphen.
4445 * HL (HY | BA) × */
4447 if (backup_one_LB(strbeg, &temp_pos, utf8_target)
4448 == LB_Hebrew_Letter)
4453 return LB_table[prev][after] - LB_HY_or_BA_then_foo == LB_BREAKABLE;
4455 case LB_PR_or_PO_then_OP_or_HY + LB_BREAKABLE:
4456 case LB_PR_or_PO_then_OP_or_HY + LB_NOBREAK:
4458 /* LB25a (PR | PO) × ( OP | HY )? NU */
4459 if (advance_one_LB(&temp_pos, strend, utf8_target) == LB_Numeric) {
4463 return LB_table[prev][after] - LB_PR_or_PO_then_OP_or_HY
4466 case LB_SY_or_IS_then_various + LB_BREAKABLE:
4467 case LB_SY_or_IS_then_various + LB_NOBREAK:
4469 /* LB25d NU (SY | IS)* × (NU | SY | IS | CL | CP ) */
4471 LB_enum temp = prev;
4473 temp = backup_one_LB(strbeg, &temp_pos, utf8_target);
4475 while (temp == LB_Break_Symbols || temp == LB_Infix_Numeric);
4476 if (temp == LB_Numeric) {
4480 return LB_table[prev][after] - LB_SY_or_IS_then_various
4484 case LB_various_then_PO_or_PR + LB_BREAKABLE:
4485 case LB_various_then_PO_or_PR + LB_NOBREAK:
4487 /* LB25e NU (SY | IS)* (CL | CP)? × (PO | PR) */
4489 LB_enum temp = prev;
4490 if (temp == LB_Close_Punctuation || temp == LB_Close_Parenthesis)
4492 temp = backup_one_LB(strbeg, &temp_pos, utf8_target);
4494 while (temp == LB_Break_Symbols || temp == LB_Infix_Numeric) {
4495 temp = backup_one_LB(strbeg, &temp_pos, utf8_target);
4497 if (temp == LB_Numeric) {
4500 return LB_various_then_PO_or_PR;
4508 Perl_re_printf( aTHX_ "Unhandled LB pair: LB_table[%d, %d] = %d\n",
4509 before, after, LB_table[before][after]);
4516 S_advance_one_LB(pTHX_ U8 ** curpos, const U8 * const strend, const bool utf8_target)
4520 PERL_ARGS_ASSERT_ADVANCE_ONE_LB;
4522 if (*curpos >= strend) {
4527 *curpos += UTF8SKIP(*curpos);
4528 if (*curpos >= strend) {
4531 lb = getLB_VAL_UTF8(*curpos, strend);
4535 if (*curpos >= strend) {
4538 lb = getLB_VAL_CP(**curpos);
4545 S_backup_one_LB(pTHX_ const U8 * const strbeg, U8 ** curpos, const bool utf8_target)
4549 PERL_ARGS_ASSERT_BACKUP_ONE_LB;
4551 if (*curpos < strbeg) {
4556 U8 * prev_char_pos = reghopmaybe3(*curpos, -1, strbeg);
4557 U8 * prev_prev_char_pos;
4559 if (! prev_char_pos) {
4563 if ((prev_prev_char_pos = reghopmaybe3((U8 *) prev_char_pos, -1, strbeg))) {
4564 lb = getLB_VAL_UTF8(prev_prev_char_pos, prev_char_pos);
4565 *curpos = prev_char_pos;
4566 prev_char_pos = prev_prev_char_pos;
4569 *curpos = (U8 *) strbeg;
4574 if (*curpos - 2 < strbeg) {
4575 *curpos = (U8 *) strbeg;
4579 lb = getLB_VAL_CP(*(*curpos - 1));
4586 S_isSB(pTHX_ SB_enum before,
4588 const U8 * const strbeg,
4589 const U8 * const curpos,
4590 const U8 * const strend,
4591 const bool utf8_target)
4593 /* returns a boolean indicating if there is a Sentence Boundary Break
4594 * between the inputs. See http://www.unicode.org/reports/tr29/ */
4596 U8 * lpos = (U8 *) curpos;
4597 bool has_para_sep = FALSE;
4598 bool has_sp = FALSE;
4600 PERL_ARGS_ASSERT_ISSB;
4602 /* Break at the start and end of text.
4605 But unstated in Unicode is don't break if the text is empty */
4606 if (before == SB_EDGE || after == SB_EDGE) {
4607 return before != after;
4610 /* SB 3: Do not break within CRLF. */
4611 if (before == SB_CR && after == SB_LF) {
4615 /* Break after paragraph separators. CR and LF are considered
4616 * so because Unicode views text as like word processing text where there
4617 * are no newlines except between paragraphs, and the word processor takes
4618 * care of wrapping without there being hard line-breaks in the text *./
4619 SB4. Sep | CR | LF ÷ */
4620 if (before == SB_Sep || before == SB_CR || before == SB_LF) {
4624 /* Ignore Format and Extend characters, except after sot, Sep, CR, or LF.
4625 * (See Section 6.2, Replacing Ignore Rules.)
4626 SB5. X (Extend | Format)* → X */
4627 if (after == SB_Extend || after == SB_Format) {
4629 /* Implied is that the these characters attach to everything
4630 * immediately prior to them except for those separator-type
4631 * characters. And the rules earlier have already handled the case
4632 * when one of those immediately precedes the extend char */
4636 if (before == SB_Extend || before == SB_Format) {
4637 U8 * temp_pos = lpos;
4638 const SB_enum backup = backup_one_SB(strbeg, &temp_pos, utf8_target);
4639 if ( backup != SB_EDGE
4648 /* Here, both 'before' and 'backup' are these types; implied is that we
4649 * don't break between them */
4650 if (backup == SB_Extend || backup == SB_Format) {
4655 /* Do not break after ambiguous terminators like period, if they are
4656 * immediately followed by a number or lowercase letter, if they are
4657 * between uppercase letters, if the first following letter (optionally
4658 * after certain punctuation) is lowercase, or if they are followed by
4659 * "continuation" punctuation such as comma, colon, or semicolon. For
4660 * example, a period may be an abbreviation or numeric period, and thus may
4661 * not mark the end of a sentence.
4663 * SB6. ATerm × Numeric */
4664 if (before == SB_ATerm && after == SB_Numeric) {
4668 /* SB7. (Upper | Lower) ATerm × Upper */
4669 if (before == SB_ATerm && after == SB_Upper) {
4670 U8 * temp_pos = lpos;
4671 SB_enum backup = backup_one_SB(strbeg, &temp_pos, utf8_target);
4672 if (backup == SB_Upper || backup == SB_Lower) {
4677 /* The remaining rules that aren't the final one, all require an STerm or
4678 * an ATerm after having backed up over some Close* Sp*, and in one case an
4679 * optional Paragraph separator, although one rule doesn't have any Sp's in it.
4680 * So do that backup now, setting flags if either Sp or a paragraph
4681 * separator are found */
4683 if (before == SB_Sep || before == SB_CR || before == SB_LF) {
4684 has_para_sep = TRUE;
4685 before = backup_one_SB(strbeg, &lpos, utf8_target);
4688 if (before == SB_Sp) {
4691 before = backup_one_SB(strbeg, &lpos, utf8_target);
4693 while (before == SB_Sp);
4696 while (before == SB_Close) {
4697 before = backup_one_SB(strbeg, &lpos, utf8_target);
4700 /* The next few rules apply only when the backed-up-to is an ATerm, and in
4701 * most cases an STerm */
4702 if (before == SB_STerm || before == SB_ATerm) {
4704 /* So, here the lhs matches
4705 * (STerm | ATerm) Close* Sp* (Sep | CR | LF)?
4706 * and we have set flags if we found an Sp, or the optional Sep,CR,LF.
4707 * The rules that apply here are:
4709 * SB8 ATerm Close* Sp* × ( ¬(OLetter | Upper | Lower | Sep | CR
4710 | LF | STerm | ATerm) )* Lower
4711 SB8a (STerm | ATerm) Close* Sp* × (SContinue | STerm | ATerm)
4712 SB9 (STerm | ATerm) Close* × (Close | Sp | Sep | CR | LF)
4713 SB10 (STerm | ATerm) Close* Sp* × (Sp | Sep | CR | LF)
4714 SB11 (STerm | ATerm) Close* Sp* (Sep | CR | LF)? ÷
4717 /* And all but SB11 forbid having seen a paragraph separator */
4718 if (! has_para_sep) {
4719 if (before == SB_ATerm) { /* SB8 */
4720 U8 * rpos = (U8 *) curpos;
4721 SB_enum later = after;
4723 while ( later != SB_OLetter
4724 && later != SB_Upper
4725 && later != SB_Lower
4729 && later != SB_STerm
4730 && later != SB_ATerm
4731 && later != SB_EDGE)
4733 later = advance_one_SB(&rpos, strend, utf8_target);
4735 if (later == SB_Lower) {
4740 if ( after == SB_SContinue /* SB8a */
4741 || after == SB_STerm
4742 || after == SB_ATerm)
4747 if (! has_sp) { /* SB9 applies only if there was no Sp* */
4748 if ( after == SB_Close
4758 /* SB10. This and SB9 could probably be combined some way, but khw
4759 * has decided to follow the Unicode rule book precisely for
4760 * simplified maintenance */
4774 /* Otherwise, do not break.
4781 S_advance_one_SB(pTHX_ U8 ** curpos, const U8 * const strend, const bool utf8_target)
4785 PERL_ARGS_ASSERT_ADVANCE_ONE_SB;
4787 if (*curpos >= strend) {
4793 *curpos += UTF8SKIP(*curpos);
4794 if (*curpos >= strend) {
4797 sb = getSB_VAL_UTF8(*curpos, strend);
4798 } while (sb == SB_Extend || sb == SB_Format);
4803 if (*curpos >= strend) {
4806 sb = getSB_VAL_CP(**curpos);
4807 } while (sb == SB_Extend || sb == SB_Format);
4814 S_backup_one_SB(pTHX_ const U8 * const strbeg, U8 ** curpos, const bool utf8_target)
4818 PERL_ARGS_ASSERT_BACKUP_ONE_SB;
4820 if (*curpos < strbeg) {
4825 U8 * prev_char_pos = reghopmaybe3(*curpos, -1, strbeg);
4826 if (! prev_char_pos) {
4830 /* Back up over Extend and Format. curpos is always just to the right
4831 * of the characater whose value we are getting */
4833 U8 * prev_prev_char_pos;
4834 if ((prev_prev_char_pos = reghopmaybe3((U8 *) prev_char_pos, -1,
4837 sb = getSB_VAL_UTF8(prev_prev_char_pos, prev_char_pos);
4838 *curpos = prev_char_pos;
4839 prev_char_pos = prev_prev_char_pos;
4842 *curpos = (U8 *) strbeg;
4845 } while (sb == SB_Extend || sb == SB_Format);
4849 if (*curpos - 2 < strbeg) {
4850 *curpos = (U8 *) strbeg;
4854 sb = getSB_VAL_CP(*(*curpos - 1));
4855 } while (sb == SB_Extend || sb == SB_Format);
4862 S_isWB(pTHX_ WB_enum previous,
4865 const U8 * const strbeg,
4866 const U8 * const curpos,
4867 const U8 * const strend,
4868 const bool utf8_target)
4870 /* Return a boolean as to if the boundary between 'before' and 'after' is
4871 * a Unicode word break, using their published algorithm, but tailored for
4872 * Perl by treating spans of white space as one unit. Context may be
4873 * needed to make this determination. If the value for the character
4874 * before 'before' is known, it is passed as 'previous'; otherwise that
4875 * should be set to WB_UNKNOWN. The other input parameters give the
4876 * boundaries and current position in the matching of the string. That
4877 * is, 'curpos' marks the position where the character whose wb value is
4878 * 'after' begins. See http://www.unicode.org/reports/tr29/ */
4880 U8 * before_pos = (U8 *) curpos;
4881 U8 * after_pos = (U8 *) curpos;
4882 WB_enum prev = before;
4885 PERL_ARGS_ASSERT_ISWB;
4887 /* Rule numbers in the comments below are as of Unicode 8.0 */
4891 switch (WB_table[before][after]) {
4898 case WB_hs_then_hs: /* 2 horizontal spaces in a row */
4899 next = advance_one_WB(&after_pos, strend, utf8_target,
4900 FALSE /* Don't skip Extend nor Format */ );
4901 /* A space immediately preceeding an Extend or Format is attached
4902 * to by them, and hence gets separated from previous spaces.
4903 * Otherwise don't break between horizontal white space */
4904 return next == WB_Extend || next == WB_Format;
4906 /* WB4 Ignore Format and Extend characters, except when they appear at
4907 * the beginning of a region of text. This code currently isn't
4908 * general purpose, but it works as the rules are currently and likely
4909 * to be laid out. The reason it works is that when 'they appear at
4910 * the beginning of a region of text', the rule is to break before
4911 * them, just like any other character. Therefore, the default rule
4912 * applies and we don't have to look in more depth. Should this ever
4913 * change, we would have to have 2 'case' statements, like in the
4914 * rules below, and backup a single character (not spacing over the
4915 * extend ones) and then see if that is one of the region-end
4916 * characters and go from there */
4917 case WB_Ex_or_FO_then_foo:
4918 prev = backup_one_WB(&previous, strbeg, &before_pos, utf8_target);
4921 case WB_DQ_then_HL + WB_BREAKABLE:
4922 case WB_DQ_then_HL + WB_NOBREAK:
4924 /* WB7c Hebrew_Letter Double_Quote × Hebrew_Letter */
4926 if (backup_one_WB(&previous, strbeg, &before_pos, utf8_target)
4927 == WB_Hebrew_Letter)
4932 return WB_table[before][after] - WB_DQ_then_HL == WB_BREAKABLE;
4934 case WB_HL_then_DQ + WB_BREAKABLE:
4935 case WB_HL_then_DQ + WB_NOBREAK:
4937 /* WB7b Hebrew_Letter × Double_Quote Hebrew_Letter */
4939 if (advance_one_WB(&after_pos, strend, utf8_target,
4940 TRUE /* Do skip Extend and Format */ )
4941 == WB_Hebrew_Letter)
4946 return WB_table[before][after] - WB_HL_then_DQ == WB_BREAKABLE;
4948 case WB_LE_or_HL_then_MB_or_ML_or_SQ + WB_NOBREAK:
4949 case WB_LE_or_HL_then_MB_or_ML_or_SQ + WB_BREAKABLE:
4951 /* WB6 (ALetter | Hebrew_Letter) × (MidLetter | MidNumLet
4952 * | Single_Quote) (ALetter | Hebrew_Letter) */
4954 next = advance_one_WB(&after_pos, strend, utf8_target,
4955 TRUE /* Do skip Extend and Format */ );
4957 if (next == WB_ALetter || next == WB_Hebrew_Letter)
4962 return WB_table[before][after]
4963 - WB_LE_or_HL_then_MB_or_ML_or_SQ == WB_BREAKABLE;
4965 case WB_MB_or_ML_or_SQ_then_LE_or_HL + WB_NOBREAK:
4966 case WB_MB_or_ML_or_SQ_then_LE_or_HL + WB_BREAKABLE:
4968 /* WB7 (ALetter | Hebrew_Letter) (MidLetter | MidNumLet
4969 * | Single_Quote) × (ALetter | Hebrew_Letter) */
4971 prev = backup_one_WB(&previous, strbeg, &before_pos, utf8_target);
4972 if (prev == WB_ALetter || prev == WB_Hebrew_Letter)
4977 return WB_table[before][after]
4978 - WB_MB_or_ML_or_SQ_then_LE_or_HL == WB_BREAKABLE;
4980 case WB_MB_or_MN_or_SQ_then_NU + WB_NOBREAK:
4981 case WB_MB_or_MN_or_SQ_then_NU + WB_BREAKABLE:
4983 /* WB11 Numeric (MidNum | (MidNumLet | Single_Quote)) × Numeric
4986 if (backup_one_WB(&previous, strbeg, &before_pos, utf8_target)
4992 return WB_table[before][after]
4993 - WB_MB_or_MN_or_SQ_then_NU == WB_BREAKABLE;
4995 case WB_NU_then_MB_or_MN_or_SQ + WB_NOBREAK:
4996 case WB_NU_then_MB_or_MN_or_SQ + WB_BREAKABLE:
4998 /* WB12 Numeric × (MidNum | MidNumLet | Single_Quote) Numeric */
5000 if (advance_one_WB(&after_pos, strend, utf8_target,
5001 TRUE /* Do skip Extend and Format */ )
5007 return WB_table[before][after]
5008 - WB_NU_then_MB_or_MN_or_SQ == WB_BREAKABLE;
5015 Perl_re_printf( aTHX_ "Unhandled WB pair: WB_table[%d, %d] = %d\n",
5016 before, after, WB_table[before][after]);
5023 S_advance_one_WB(pTHX_ U8 ** curpos,
5024 const U8 * const strend,
5025 const bool utf8_target,
5026 const bool skip_Extend_Format)
5030 PERL_ARGS_ASSERT_ADVANCE_ONE_WB;
5032 if (*curpos >= strend) {
5038 /* Advance over Extend and Format */
5040 *curpos += UTF8SKIP(*curpos);
5041 if (*curpos >= strend) {
5044 wb = getWB_VAL_UTF8(*curpos, strend);
5045 } while ( skip_Extend_Format
5046 && (wb == WB_Extend || wb == WB_Format));
5051 if (*curpos >= strend) {
5054 wb = getWB_VAL_CP(**curpos);
5055 } while ( skip_Extend_Format
5056 && (wb == WB_Extend || wb == WB_Format));
5063 S_backup_one_WB(pTHX_ WB_enum * previous, const U8 * const strbeg, U8 ** curpos, const bool utf8_target)
5067 PERL_ARGS_ASSERT_BACKUP_ONE_WB;
5069 /* If we know what the previous character's break value is, don't have
5071 if (*previous != WB_UNKNOWN) {
5074 /* But we need to move backwards by one */
5076 *curpos = reghopmaybe3(*curpos, -1, strbeg);
5078 *previous = WB_EDGE;
5079 *curpos = (U8 *) strbeg;
5082 *previous = WB_UNKNOWN;
5087 *previous = (*curpos <= strbeg) ? WB_EDGE : WB_UNKNOWN;
5090 /* And we always back up over these two types */
5091 if (wb != WB_Extend && wb != WB_Format) {
5096 if (*curpos < strbeg) {
5101 U8 * prev_char_pos = reghopmaybe3(*curpos, -1, strbeg);
5102 if (! prev_char_pos) {
5106 /* Back up over Extend and Format. curpos is always just to the right
5107 * of the characater whose value we are getting */
5109 U8 * prev_prev_char_pos;
5110 if ((prev_prev_char_pos = reghopmaybe3((U8 *) prev_char_pos,
5114 wb = getWB_VAL_UTF8(prev_prev_char_pos, prev_char_pos);
5115 *curpos = prev_char_pos;
5116 prev_char_pos = prev_prev_char_pos;
5119 *curpos = (U8 *) strbeg;
5122 } while (wb == WB_Extend || wb == WB_Format);
5126 if (*curpos - 2 < strbeg) {
5127 *curpos = (U8 *) strbeg;
5131 wb = getWB_VAL_CP(*(*curpos - 1));
5132 } while (wb == WB_Extend || wb == WB_Format);
5138 #define EVAL_CLOSE_PAREN_IS(st,expr) \
5141 ( ( st )->u.eval.close_paren ) && \
5142 ( ( ( st )->u.eval.close_paren ) == ( (expr) + 1 ) ) \
5145 #define EVAL_CLOSE_PAREN_IS_TRUE(st,expr) \
5148 ( ( st )->u.eval.close_paren ) && \
5150 ( ( ( st )->u.eval.close_paren ) == ( (expr) + 1 ) ) \
5154 #define EVAL_CLOSE_PAREN_SET(st,expr) \
5155 (st)->u.eval.close_paren = ( (expr) + 1 )
5157 #define EVAL_CLOSE_PAREN_CLEAR(st) \
5158 (st)->u.eval.close_paren = 0
5160 /* returns -1 on failure, $+[0] on success */
5162 S_regmatch(pTHX_ regmatch_info *reginfo, char *startpos, regnode *prog)
5165 #if PERL_VERSION < 9 && !defined(PERL_CORE)
5169 const bool utf8_target = reginfo->is_utf8_target;
5170 const U32 uniflags = UTF8_ALLOW_DEFAULT;
5171 REGEXP *rex_sv = reginfo->prog;
5172 regexp *rex = ReANY(rex_sv);
5173 RXi_GET_DECL(rex,rexi);
5174 /* the current state. This is a cached copy of PL_regmatch_state */
5176 /* cache heavy used fields of st in registers */
5179 U32 n = 0; /* general value; init to avoid compiler warning */
5180 SSize_t ln = 0; /* len or last; init to avoid compiler warning */
5181 char *locinput = startpos;
5182 char *pushinput; /* where to continue after a PUSH */
5183 I32 nextchr; /* is always set to UCHARAT(locinput), or -1 at EOS */
5185 bool result = 0; /* return value of S_regmatch */
5186 int depth = 0; /* depth of backtrack stack */
5187 U32 nochange_depth = 0; /* depth of GOSUB recursion with nochange */
5188 const U32 max_nochange_depth =
5189 (3 * rex->nparens > MAX_RECURSE_EVAL_NOCHANGE_DEPTH) ?
5190 3 * rex->nparens : MAX_RECURSE_EVAL_NOCHANGE_DEPTH;
5191 regmatch_state *yes_state = NULL; /* state to pop to on success of
5193 /* mark_state piggy backs on the yes_state logic so that when we unwind
5194 the stack on success we can update the mark_state as we go */
5195 regmatch_state *mark_state = NULL; /* last mark state we have seen */
5196 regmatch_state *cur_eval = NULL; /* most recent EVAL_AB state */
5197 struct regmatch_state *cur_curlyx = NULL; /* most recent curlyx */
5199 bool no_final = 0; /* prevent failure from backtracking? */
5200 bool do_cutgroup = 0; /* no_final only until next branch/trie entry */
5201 char *startpoint = locinput;
5202 SV *popmark = NULL; /* are we looking for a mark? */
5203 SV *sv_commit = NULL; /* last mark name seen in failure */
5204 SV *sv_yes_mark = NULL; /* last mark name we have seen
5205 during a successful match */
5206 U32 lastopen = 0; /* last open we saw */
5207 bool has_cutgroup = RX_HAS_CUTGROUP(rex) ? 1 : 0;
5208 SV* const oreplsv = GvSVn(PL_replgv);
5209 /* these three flags are set by various ops to signal information to
5210 * the very next op. They have a useful lifetime of exactly one loop
5211 * iteration, and are not preserved or restored by state pushes/pops
5213 bool sw = 0; /* the condition value in (?(cond)a|b) */
5214 bool minmod = 0; /* the next "{n,m}" is a "{n,m}?" */
5215 int logical = 0; /* the following EVAL is:
5219 or the following IFMATCH/UNLESSM is:
5220 false: plain (?=foo)
5221 true: used as a condition: (?(?=foo))
5223 PAD* last_pad = NULL;
5225 U8 gimme = G_SCALAR;
5226 CV *caller_cv = NULL; /* who called us */
5227 CV *last_pushed_cv = NULL; /* most recently called (?{}) CV */
5228 CHECKPOINT runops_cp; /* savestack position before executing EVAL */
5229 U32 maxopenparen = 0; /* max '(' index seen so far */
5230 int to_complement; /* Invert the result? */
5231 _char_class_number classnum;
5232 bool is_utf8_pat = reginfo->is_utf8_pat;
5236 GET_RE_DEBUG_FLAGS_DECL;
5239 /* protect against undef(*^R) */
5240 SAVEFREESV(SvREFCNT_inc_simple_NN(oreplsv));
5242 /* shut up 'may be used uninitialized' compiler warnings for dMULTICALL */
5243 multicall_oldcatch = 0;
5244 PERL_UNUSED_VAR(multicall_cop);
5246 PERL_ARGS_ASSERT_REGMATCH;
5248 DEBUG_OPTIMISE_r( DEBUG_EXECUTE_r({
5249 Perl_re_printf( aTHX_ "regmatch start\n");
5252 st = PL_regmatch_state;
5254 /* Note that nextchr is a byte even in UTF */
5257 while (scan != NULL) {
5260 next = scan + NEXT_OFF(scan);
5263 state_num = OP(scan);
5267 if (state_num <= REGNODE_MAX) {
5268 SV * const prop = sv_newmortal();
5269 regnode *rnext = regnext(scan);
5271 DUMP_EXEC_POS( locinput, scan, utf8_target, depth );
5272 regprop(rex, prop, scan, reginfo, NULL);
5273 Perl_re_printf( aTHX_
5274 "%*s%"IVdf":%s(%"IVdf")\n",
5275 INDENT_CHARS(depth), "",
5276 (IV)(scan - rexi->program),
5278 (PL_regkind[OP(scan)] == END || !rnext) ?
5279 0 : (IV)(rnext - rexi->program));
5286 assert(nextchr < 256 && (nextchr >= 0 || nextchr == NEXTCHR_EOS));
5288 switch (state_num) {
5289 case SBOL: /* /^../ and /\A../ */
5290 if (locinput == reginfo->strbeg)
5294 case MBOL: /* /^../m */
5295 if (locinput == reginfo->strbeg ||
5296 (!NEXTCHR_IS_EOS && locinput[-1] == '\n'))
5303 if (locinput == reginfo->ganch)
5307 case KEEPS: /* \K */
5308 /* update the startpoint */
5309 st->u.keeper.val = rex->offs[0].start;
5310 rex->offs[0].start = locinput - reginfo->strbeg;
5311 PUSH_STATE_GOTO(KEEPS_next, next, locinput);
5312 NOT_REACHED; /* NOTREACHED */
5314 case KEEPS_next_fail:
5315 /* rollback the start point change */
5316 rex->offs[0].start = st->u.keeper.val;
5318 NOT_REACHED; /* NOTREACHED */
5320 case MEOL: /* /..$/m */
5321 if (!NEXTCHR_IS_EOS && nextchr != '\n')
5325 case SEOL: /* /..$/ */
5326 if (!NEXTCHR_IS_EOS && nextchr != '\n')
5328 if (reginfo->strend - locinput > 1)
5333 if (!NEXTCHR_IS_EOS)
5337 case SANY: /* /./s */
5340 goto increment_locinput;
5342 case REG_ANY: /* /./ */
5343 if ((NEXTCHR_IS_EOS) || nextchr == '\n')
5345 goto increment_locinput;
5349 #define ST st->u.trie
5350 case TRIEC: /* (ab|cd) with known charclass */
5351 /* In this case the charclass data is available inline so
5352 we can fail fast without a lot of extra overhead.
5354 if(!NEXTCHR_IS_EOS && !ANYOF_BITMAP_TEST(scan, nextchr)) {
5356 Perl_re_exec_indentf( aTHX_ "%sfailed to match trie start class...%s\n",
5357 depth, PL_colors[4], PL_colors[5])
5360 NOT_REACHED; /* NOTREACHED */
5363 case TRIE: /* (ab|cd) */
5364 /* the basic plan of execution of the trie is:
5365 * At the beginning, run though all the states, and
5366 * find the longest-matching word. Also remember the position
5367 * of the shortest matching word. For example, this pattern:
5370 * when matched against the string "abcde", will generate
5371 * accept states for all words except 3, with the longest
5372 * matching word being 4, and the shortest being 2 (with
5373 * the position being after char 1 of the string).
5375 * Then for each matching word, in word order (i.e. 1,2,4,5),
5376 * we run the remainder of the pattern; on each try setting
5377 * the current position to the character following the word,
5378 * returning to try the next word on failure.
5380 * We avoid having to build a list of words at runtime by
5381 * using a compile-time structure, wordinfo[].prev, which
5382 * gives, for each word, the previous accepting word (if any).
5383 * In the case above it would contain the mappings 1->2, 2->0,
5384 * 3->0, 4->5, 5->1. We can use this table to generate, from
5385 * the longest word (4 above), a list of all words, by
5386 * following the list of prev pointers; this gives us the
5387 * unordered list 4,5,1,2. Then given the current word we have
5388 * just tried, we can go through the list and find the
5389 * next-biggest word to try (so if we just failed on word 2,
5390 * the next in the list is 4).
5392 * Since at runtime we don't record the matching position in
5393 * the string for each word, we have to work that out for
5394 * each word we're about to process. The wordinfo table holds
5395 * the character length of each word; given that we recorded
5396 * at the start: the position of the shortest word and its
5397 * length in chars, we just need to move the pointer the
5398 * difference between the two char lengths. Depending on
5399 * Unicode status and folding, that's cheap or expensive.
5401 * This algorithm is optimised for the case where are only a
5402 * small number of accept states, i.e. 0,1, or maybe 2.
5403 * With lots of accepts states, and having to try all of them,
5404 * it becomes quadratic on number of accept states to find all
5409 /* what type of TRIE am I? (utf8 makes this contextual) */
5410 DECL_TRIE_TYPE(scan);
5412 /* what trie are we using right now */
5413 reg_trie_data * const trie
5414 = (reg_trie_data*)rexi->data->data[ ARG( scan ) ];
5415 HV * widecharmap = MUTABLE_HV(rexi->data->data[ ARG( scan ) + 1 ]);
5416 U32 state = trie->startstate;
5418 if (scan->flags == EXACTL || scan->flags == EXACTFLU8) {
5419 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
5421 && UTF8_IS_ABOVE_LATIN1(nextchr)
5422 && scan->flags == EXACTL)
5424 /* We only output for EXACTL, as we let the folder
5425 * output this message for EXACTFLU8 to avoid
5427 _CHECK_AND_OUTPUT_WIDE_LOCALE_UTF8_MSG(locinput,
5432 && (NEXTCHR_IS_EOS || !TRIE_BITMAP_TEST(trie, nextchr)))
5434 if (trie->states[ state ].wordnum) {
5436 Perl_re_exec_indentf( aTHX_ "%smatched empty string...%s\n",
5437 depth, PL_colors[4], PL_colors[5])
5443 Perl_re_exec_indentf( aTHX_ "%sfailed to match trie start class...%s\n",
5444 depth, PL_colors[4], PL_colors[5])
5451 U8 *uc = ( U8* )locinput;
5455 U8 *uscan = (U8*)NULL;
5456 U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
5457 U32 charcount = 0; /* how many input chars we have matched */
5458 U32 accepted = 0; /* have we seen any accepting states? */
5460 ST.jump = trie->jump;
5463 ST.longfold = FALSE; /* char longer if folded => it's harder */
5466 /* fully traverse the TRIE; note the position of the
5467 shortest accept state and the wordnum of the longest
5470 while ( state && uc <= (U8*)(reginfo->strend) ) {
5471 U32 base = trie->states[ state ].trans.base;
5475 wordnum = trie->states[ state ].wordnum;
5477 if (wordnum) { /* it's an accept state */
5480 /* record first match position */
5482 ST.firstpos = (U8*)locinput;
5487 ST.firstchars = charcount;
5490 if (!ST.nextword || wordnum < ST.nextword)
5491 ST.nextword = wordnum;
5492 ST.topword = wordnum;
5495 DEBUG_TRIE_EXECUTE_r({
5496 DUMP_EXEC_POS( (char *)uc, scan, utf8_target, depth );
5497 Perl_re_exec_indentf( aTHX_
5498 "%sState: %4"UVxf" Accepted: %c ",
5499 depth, PL_colors[4],
5500 (UV)state, (accepted ? 'Y' : 'N'));
5503 /* read a char and goto next state */
5504 if ( base && (foldlen || uc < (U8*)(reginfo->strend))) {
5506 REXEC_TRIE_READ_CHAR(trie_type, trie, widecharmap, uc,
5507 uscan, len, uvc, charid, foldlen,
5514 base + charid - 1 - trie->uniquecharcount)) >= 0)
5516 && ((U32)offset < trie->lasttrans)
5517 && trie->trans[offset].check == state)
5519 state = trie->trans[offset].next;
5530 DEBUG_TRIE_EXECUTE_r(
5531 Perl_re_printf( aTHX_
5532 "Charid:%3x CP:%4"UVxf" After State: %4"UVxf"%s\n",
5533 charid, uvc, (UV)state, PL_colors[5] );
5539 /* calculate total number of accept states */
5544 w = trie->wordinfo[w].prev;
5547 ST.accepted = accepted;
5551 Perl_re_exec_indentf( aTHX_ "%sgot %"IVdf" possible matches%s\n",
5553 PL_colors[4], (IV)ST.accepted, PL_colors[5] );
5555 goto trie_first_try; /* jump into the fail handler */
5557 NOT_REACHED; /* NOTREACHED */
5559 case TRIE_next_fail: /* we failed - try next alternative */
5563 REGCP_UNWIND(ST.cp);
5564 UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
5566 if (!--ST.accepted) {
5568 Perl_re_exec_indentf( aTHX_ "%sTRIE failed...%s\n",
5576 /* Find next-highest word to process. Note that this code
5577 * is O(N^2) per trie run (O(N) per branch), so keep tight */
5580 U16 const nextword = ST.nextword;
5581 reg_trie_wordinfo * const wordinfo
5582 = ((reg_trie_data*)rexi->data->data[ARG(ST.me)])->wordinfo;
5583 for (word=ST.topword; word; word=wordinfo[word].prev) {
5584 if (word > nextword && (!min || word < min))
5597 ST.lastparen = rex->lastparen;
5598 ST.lastcloseparen = rex->lastcloseparen;
5602 /* find start char of end of current word */
5604 U32 chars; /* how many chars to skip */
5605 reg_trie_data * const trie
5606 = (reg_trie_data*)rexi->data->data[ARG(ST.me)];
5608 assert((trie->wordinfo[ST.nextword].len - trie->prefixlen)
5610 chars = (trie->wordinfo[ST.nextword].len - trie->prefixlen)
5615 /* the hard option - fold each char in turn and find
5616 * its folded length (which may be different */
5617 U8 foldbuf[UTF8_MAXBYTES_CASE + 1];
5625 uvc = utf8n_to_uvchr((U8*)uc, UTF8_MAXLEN, &len,
5633 uvc = to_uni_fold(uvc, foldbuf, &foldlen);
5638 uvc = utf8n_to_uvchr(uscan, UTF8_MAXLEN, &len,
5654 scan = ST.me + ((ST.jump && ST.jump[ST.nextword])
5655 ? ST.jump[ST.nextword]
5659 Perl_re_exec_indentf( aTHX_ "%sTRIE matched word #%d, continuing%s\n",
5667 if (ST.accepted > 1 || has_cutgroup) {
5668 PUSH_STATE_GOTO(TRIE_next, scan, (char*)uc);
5669 NOT_REACHED; /* NOTREACHED */
5671 /* only one choice left - just continue */
5673 AV *const trie_words
5674 = MUTABLE_AV(rexi->data->data[ARG(ST.me)+TRIE_WORDS_OFFSET]);
5675 SV ** const tmp = trie_words
5676 ? av_fetch(trie_words, ST.nextword - 1, 0) : NULL;
5677 SV *sv= tmp ? sv_newmortal() : NULL;
5679 Perl_re_exec_indentf( aTHX_ "%sonly one match left, short-circuiting: #%d <%s>%s\n",
5680 depth, PL_colors[4],
5682 tmp ? pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), 0,
5683 PL_colors[0], PL_colors[1],
5684 (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0)|PERL_PV_ESCAPE_NONASCII
5686 : "not compiled under -Dr",
5690 locinput = (char*)uc;
5691 continue; /* execute rest of RE */
5696 case EXACTL: /* /abc/l */
5697 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
5699 /* Complete checking would involve going through every character
5700 * matched by the string to see if any is above latin1. But the
5701 * comparision otherwise might very well be a fast assembly
5702 * language routine, and I (khw) don't think slowing things down
5703 * just to check for this warning is worth it. So this just checks
5704 * the first character */
5705 if (utf8_target && UTF8_IS_ABOVE_LATIN1(*locinput)) {
5706 _CHECK_AND_OUTPUT_WIDE_LOCALE_UTF8_MSG(locinput, reginfo->strend);
5709 case EXACT: { /* /abc/ */
5710 char *s = STRING(scan);
5712 if (utf8_target != is_utf8_pat) {
5713 /* The target and the pattern have differing utf8ness. */
5715 const char * const e = s + ln;
5718 /* The target is utf8, the pattern is not utf8.
5719 * Above-Latin1 code points can't match the pattern;
5720 * invariants match exactly, and the other Latin1 ones need
5721 * to be downgraded to a single byte in order to do the
5722 * comparison. (If we could be confident that the target
5723 * is not malformed, this could be refactored to have fewer
5724 * tests by just assuming that if the first bytes match, it
5725 * is an invariant, but there are tests in the test suite
5726 * dealing with (??{...}) which violate this) */
5728 if (l >= reginfo->strend
5729 || UTF8_IS_ABOVE_LATIN1(* (U8*) l))
5733 if (UTF8_IS_INVARIANT(*(U8*)l)) {
5740 if (EIGHT_BIT_UTF8_TO_NATIVE(*l, *(l+1)) != * (U8*) s)
5750 /* The target is not utf8, the pattern is utf8. */
5752 if (l >= reginfo->strend
5753 || UTF8_IS_ABOVE_LATIN1(* (U8*) s))
5757 if (UTF8_IS_INVARIANT(*(U8*)s)) {
5764 if (EIGHT_BIT_UTF8_TO_NATIVE(*s, *(s+1)) != * (U8*) l)
5776 /* The target and the pattern have the same utf8ness. */
5777 /* Inline the first character, for speed. */
5778 if (reginfo->strend - locinput < ln
5779 || UCHARAT(s) != nextchr
5780 || (ln > 1 && memNE(s, locinput, ln)))
5789 case EXACTFL: { /* /abc/il */
5791 const U8 * fold_array;
5793 U32 fold_utf8_flags;
5795 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
5796 folder = foldEQ_locale;
5797 fold_array = PL_fold_locale;
5798 fold_utf8_flags = FOLDEQ_LOCALE;
5801 case EXACTFLU8: /* /abc/il; but all 'abc' are above 255, so
5802 is effectively /u; hence to match, target
5804 if (! utf8_target) {
5807 fold_utf8_flags = FOLDEQ_LOCALE | FOLDEQ_S1_ALREADY_FOLDED
5808 | FOLDEQ_S1_FOLDS_SANE;
5809 folder = foldEQ_latin1;
5810 fold_array = PL_fold_latin1;
5813 case EXACTFU_SS: /* /\x{df}/iu */
5814 case EXACTFU: /* /abc/iu */
5815 folder = foldEQ_latin1;
5816 fold_array = PL_fold_latin1;
5817 fold_utf8_flags = is_utf8_pat ? FOLDEQ_S1_ALREADY_FOLDED : 0;
5820 case EXACTFA_NO_TRIE: /* This node only generated for non-utf8
5822 assert(! is_utf8_pat);
5824 case EXACTFA: /* /abc/iaa */
5825 folder = foldEQ_latin1;
5826 fold_array = PL_fold_latin1;
5827 fold_utf8_flags = FOLDEQ_UTF8_NOMIX_ASCII;
5830 case EXACTF: /* /abc/i This node only generated for
5831 non-utf8 patterns */
5832 assert(! is_utf8_pat);
5834 fold_array = PL_fold;
5835 fold_utf8_flags = 0;
5843 || state_num == EXACTFU_SS
5844 || (state_num == EXACTFL && IN_UTF8_CTYPE_LOCALE))
5846 /* Either target or the pattern are utf8, or has the issue where
5847 * the fold lengths may differ. */
5848 const char * const l = locinput;
5849 char *e = reginfo->strend;
5851 if (! foldEQ_utf8_flags(s, 0, ln, is_utf8_pat,
5852 l, &e, 0, utf8_target, fold_utf8_flags))
5860 /* Neither the target nor the pattern are utf8 */
5861 if (UCHARAT(s) != nextchr
5863 && UCHARAT(s) != fold_array[nextchr])
5867 if (reginfo->strend - locinput < ln)
5869 if (ln > 1 && ! folder(s, locinput, ln))
5875 case NBOUNDL: /* /\B/l */
5879 case BOUNDL: /* /\b/l */
5882 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
5884 if (FLAGS(scan) != TRADITIONAL_BOUND) {
5885 if (! IN_UTF8_CTYPE_LOCALE) {
5886 Perl_ck_warner(aTHX_ packWARN(WARN_LOCALE),
5887 B_ON_NON_UTF8_LOCALE_IS_WRONG);
5893 if (locinput == reginfo->strbeg)
5894 b1 = isWORDCHAR_LC('\n');
5896 b1 = isWORDCHAR_LC_utf8(reghop3((U8*)locinput, -1,
5897 (U8*)(reginfo->strbeg)));
5899 b2 = (NEXTCHR_IS_EOS)
5900 ? isWORDCHAR_LC('\n')
5901 : isWORDCHAR_LC_utf8((U8*)locinput);
5903 else { /* Here the string isn't utf8 */
5904 b1 = (locinput == reginfo->strbeg)
5905 ? isWORDCHAR_LC('\n')
5906 : isWORDCHAR_LC(UCHARAT(locinput - 1));
5907 b2 = (NEXTCHR_IS_EOS)
5908 ? isWORDCHAR_LC('\n')
5909 : isWORDCHAR_LC(nextchr);
5911 if (to_complement ^ (b1 == b2)) {
5917 case NBOUND: /* /\B/ */
5921 case BOUND: /* /\b/ */
5925 goto bound_ascii_match_only;
5927 case NBOUNDA: /* /\B/a */
5931 case BOUNDA: /* /\b/a */
5935 bound_ascii_match_only:
5936 /* Here the string isn't utf8, or is utf8 and only ascii characters
5937 * are to match \w. In the latter case looking at the byte just
5938 * prior to the current one may be just the final byte of a
5939 * multi-byte character. This is ok. There are two cases:
5940 * 1) it is a single byte character, and then the test is doing
5941 * just what it's supposed to.
5942 * 2) it is a multi-byte character, in which case the final byte is
5943 * never mistakable for ASCII, and so the test will say it is
5944 * not a word character, which is the correct answer. */
5945 b1 = (locinput == reginfo->strbeg)
5946 ? isWORDCHAR_A('\n')
5947 : isWORDCHAR_A(UCHARAT(locinput - 1));
5948 b2 = (NEXTCHR_IS_EOS)
5949 ? isWORDCHAR_A('\n')
5950 : isWORDCHAR_A(nextchr);
5951 if (to_complement ^ (b1 == b2)) {
5957 case NBOUNDU: /* /\B/u */
5961 case BOUNDU: /* /\b/u */
5964 if (UNLIKELY(reginfo->strbeg >= reginfo->strend)) {
5967 else if (utf8_target) {
5969 switch((bound_type) FLAGS(scan)) {
5970 case TRADITIONAL_BOUND:
5973 b1 = (locinput == reginfo->strbeg)
5974 ? 0 /* isWORDCHAR_L1('\n') */
5975 : isWORDCHAR_utf8(reghop3((U8*)locinput, -1,
5976 (U8*)(reginfo->strbeg)));
5977 b2 = (NEXTCHR_IS_EOS)
5978 ? 0 /* isWORDCHAR_L1('\n') */
5979 : isWORDCHAR_utf8((U8*)locinput);
5980 match = cBOOL(b1 != b2);
5984 if (locinput == reginfo->strbeg || NEXTCHR_IS_EOS) {
5985 match = TRUE; /* GCB always matches at begin and
5989 /* Find the gcb values of previous and current
5990 * chars, then see if is a break point */
5991 match = isGCB(getGCB_VAL_UTF8(
5992 reghop3((U8*)locinput,
5994 (U8*)(reginfo->strbeg)),
5995 (U8*) reginfo->strend),
5996 getGCB_VAL_UTF8((U8*) locinput,
5997 (U8*) reginfo->strend));
6002 if (locinput == reginfo->strbeg) {
6005 else if (NEXTCHR_IS_EOS) {
6009 match = isLB(getLB_VAL_UTF8(
6010 reghop3((U8*)locinput,
6012 (U8*)(reginfo->strbeg)),
6013 (U8*) reginfo->strend),
6014 getLB_VAL_UTF8((U8*) locinput,
6015 (U8*) reginfo->strend),
6016 (U8*) reginfo->strbeg,
6018 (U8*) reginfo->strend,
6023 case SB_BOUND: /* Always matches at begin and end */
6024 if (locinput == reginfo->strbeg || NEXTCHR_IS_EOS) {
6028 match = isSB(getSB_VAL_UTF8(
6029 reghop3((U8*)locinput,
6031 (U8*)(reginfo->strbeg)),
6032 (U8*) reginfo->strend),
6033 getSB_VAL_UTF8((U8*) locinput,
6034 (U8*) reginfo->strend),
6035 (U8*) reginfo->strbeg,
6037 (U8*) reginfo->strend,
6043 if (locinput == reginfo->strbeg || NEXTCHR_IS_EOS) {
6047 match = isWB(WB_UNKNOWN,
6049 reghop3((U8*)locinput,
6051 (U8*)(reginfo->strbeg)),
6052 (U8*) reginfo->strend),
6053 getWB_VAL_UTF8((U8*) locinput,
6054 (U8*) reginfo->strend),
6055 (U8*) reginfo->strbeg,
6057 (U8*) reginfo->strend,
6063 else { /* Not utf8 target */
6064 switch((bound_type) FLAGS(scan)) {
6065 case TRADITIONAL_BOUND:
6068 b1 = (locinput == reginfo->strbeg)
6069 ? 0 /* isWORDCHAR_L1('\n') */
6070 : isWORDCHAR_L1(UCHARAT(locinput - 1));
6071 b2 = (NEXTCHR_IS_EOS)
6072 ? 0 /* isWORDCHAR_L1('\n') */
6073 : isWORDCHAR_L1(nextchr);
6074 match = cBOOL(b1 != b2);
6079 if (locinput == reginfo->strbeg || NEXTCHR_IS_EOS) {
6080 match = TRUE; /* GCB always matches at begin and
6083 else { /* Only CR-LF combo isn't a GCB in 0-255
6085 match = UCHARAT(locinput - 1) != '\r'
6086 || UCHARAT(locinput) != '\n';
6091 if (locinput == reginfo->strbeg) {
6094 else if (NEXTCHR_IS_EOS) {
6098 match = isLB(getLB_VAL_CP(UCHARAT(locinput -1)),
6099 getLB_VAL_CP(UCHARAT(locinput)),
6100 (U8*) reginfo->strbeg,
6102 (U8*) reginfo->strend,
6107 case SB_BOUND: /* Always matches at begin and end */
6108 if (locinput == reginfo->strbeg || NEXTCHR_IS_EOS) {
6112 match = isSB(getSB_VAL_CP(UCHARAT(locinput -1)),
6113 getSB_VAL_CP(UCHARAT(locinput)),
6114 (U8*) reginfo->strbeg,
6116 (U8*) reginfo->strend,
6122 if (locinput == reginfo->strbeg || NEXTCHR_IS_EOS) {
6126 match = isWB(WB_UNKNOWN,
6127 getWB_VAL_CP(UCHARAT(locinput -1)),
6128 getWB_VAL_CP(UCHARAT(locinput)),
6129 (U8*) reginfo->strbeg,
6131 (U8*) reginfo->strend,
6138 if (to_complement ^ ! match) {
6143 case ANYOFL: /* /[abc]/l */
6144 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
6146 if (ANYOFL_UTF8_LOCALE_REQD(FLAGS(scan)) && ! IN_UTF8_CTYPE_LOCALE)
6148 Perl_ck_warner(aTHX_ packWARN(WARN_LOCALE), utf8_locale_required);
6151 case ANYOFD: /* /[abc]/d */
6152 case ANYOF: /* /[abc]/ */
6155 if (utf8_target && ! UTF8_IS_INVARIANT(*locinput)) {
6156 if (!reginclass(rex, scan, (U8*)locinput, (U8*)reginfo->strend,
6159 locinput += UTF8SKIP(locinput);
6162 if (!REGINCLASS(rex, scan, (U8*)locinput, utf8_target))
6168 /* The argument (FLAGS) to all the POSIX node types is the class number
6171 case NPOSIXL: /* \W or [:^punct:] etc. under /l */
6175 case POSIXL: /* \w or [:punct:] etc. under /l */
6176 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
6180 /* Use isFOO_lc() for characters within Latin1. (Note that
6181 * UTF8_IS_INVARIANT works even on non-UTF-8 strings, or else
6182 * wouldn't be invariant) */
6183 if (UTF8_IS_INVARIANT(nextchr) || ! utf8_target) {
6184 if (! (to_complement ^ cBOOL(isFOO_lc(FLAGS(scan), (U8) nextchr)))) {
6188 else if (UTF8_IS_DOWNGRADEABLE_START(nextchr)) {
6189 if (! (to_complement ^ cBOOL(isFOO_lc(FLAGS(scan),
6190 EIGHT_BIT_UTF8_TO_NATIVE(nextchr,
6191 *(locinput + 1))))))
6196 else { /* Here, must be an above Latin-1 code point */
6197 _CHECK_AND_OUTPUT_WIDE_LOCALE_UTF8_MSG(locinput, reginfo->strend);
6198 goto utf8_posix_above_latin1;
6201 /* Here, must be utf8 */
6202 locinput += UTF8SKIP(locinput);
6205 case NPOSIXD: /* \W or [:^punct:] etc. under /d */
6209 case POSIXD: /* \w or [:punct:] etc. under /d */
6215 case NPOSIXA: /* \W or [:^punct:] etc. under /a */
6217 if (NEXTCHR_IS_EOS) {
6221 /* All UTF-8 variants match */
6222 if (! UTF8_IS_INVARIANT(nextchr)) {
6223 goto increment_locinput;
6229 case POSIXA: /* \w or [:punct:] etc. under /a */
6232 /* We get here through POSIXD, NPOSIXD, and NPOSIXA when not in
6233 * UTF-8, and also from NPOSIXA even in UTF-8 when the current
6234 * character is a single byte */
6236 if (NEXTCHR_IS_EOS) {
6242 if (! (to_complement ^ cBOOL(_generic_isCC_A(nextchr,
6248 /* Here we are either not in utf8, or we matched a utf8-invariant,
6249 * so the next char is the next byte */
6253 case NPOSIXU: /* \W or [:^punct:] etc. under /u */
6257 case POSIXU: /* \w or [:punct:] etc. under /u */
6259 if (NEXTCHR_IS_EOS) {
6263 /* Use _generic_isCC() for characters within Latin1. (Note that
6264 * UTF8_IS_INVARIANT works even on non-UTF-8 strings, or else
6265 * wouldn't be invariant) */
6266 if (UTF8_IS_INVARIANT(nextchr) || ! utf8_target) {
6267 if (! (to_complement ^ cBOOL(_generic_isCC(nextchr,
6274 else if (UTF8_IS_DOWNGRADEABLE_START(nextchr)) {
6275 if (! (to_complement
6276 ^ cBOOL(_generic_isCC(EIGHT_BIT_UTF8_TO_NATIVE(nextchr,
6284 else { /* Handle above Latin-1 code points */
6285 utf8_posix_above_latin1:
6286 classnum = (_char_class_number) FLAGS(scan);
6287 if (classnum < _FIRST_NON_SWASH_CC) {
6289 /* Here, uses a swash to find such code points. Load if if
6290 * not done already */
6291 if (! PL_utf8_swash_ptrs[classnum]) {
6292 U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
6293 PL_utf8_swash_ptrs[classnum]
6294 = _core_swash_init("utf8",
6297 PL_XPosix_ptrs[classnum], &flags);
6299 if (! (to_complement
6300 ^ cBOOL(swash_fetch(PL_utf8_swash_ptrs[classnum],
6301 (U8 *) locinput, TRUE))))
6306 else { /* Here, uses macros to find above Latin-1 code points */
6308 case _CC_ENUM_SPACE:
6309 if (! (to_complement
6310 ^ cBOOL(is_XPERLSPACE_high(locinput))))
6315 case _CC_ENUM_BLANK:
6316 if (! (to_complement
6317 ^ cBOOL(is_HORIZWS_high(locinput))))
6322 case _CC_ENUM_XDIGIT:
6323 if (! (to_complement
6324 ^ cBOOL(is_XDIGIT_high(locinput))))
6329 case _CC_ENUM_VERTSPACE:
6330 if (! (to_complement
6331 ^ cBOOL(is_VERTWS_high(locinput))))
6336 default: /* The rest, e.g. [:cntrl:], can't match
6338 if (! to_complement) {
6344 locinput += UTF8SKIP(locinput);
6348 case CLUMP: /* Match \X: logical Unicode character. This is defined as
6349 a Unicode extended Grapheme Cluster */
6352 if (! utf8_target) {
6354 /* Match either CR LF or '.', as all the other possibilities
6356 locinput++; /* Match the . or CR */
6357 if (nextchr == '\r' /* And if it was CR, and the next is LF,
6359 && locinput < reginfo->strend
6360 && UCHARAT(locinput) == '\n')
6367 /* Get the gcb type for the current character */
6368 GCB_enum prev_gcb = getGCB_VAL_UTF8((U8*) locinput,
6369 (U8*) reginfo->strend);
6371 /* Then scan through the input until we get to the first
6372 * character whose type is supposed to be a gcb with the
6373 * current character. (There is always a break at the
6375 locinput += UTF8SKIP(locinput);
6376 while (locinput < reginfo->strend) {
6377 GCB_enum cur_gcb = getGCB_VAL_UTF8((U8*) locinput,
6378 (U8*) reginfo->strend);
6379 if (isGCB(prev_gcb, cur_gcb)) {
6384 locinput += UTF8SKIP(locinput);
6391 case NREFFL: /* /\g{name}/il */
6392 { /* The capture buffer cases. The ones beginning with N for the
6393 named buffers just convert to the equivalent numbered and
6394 pretend they were called as the corresponding numbered buffer
6396 /* don't initialize these in the declaration, it makes C++
6401 const U8 *fold_array;
6404 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
6405 folder = foldEQ_locale;
6406 fold_array = PL_fold_locale;
6408 utf8_fold_flags = FOLDEQ_LOCALE;
6411 case NREFFA: /* /\g{name}/iaa */
6412 folder = foldEQ_latin1;
6413 fold_array = PL_fold_latin1;
6415 utf8_fold_flags = FOLDEQ_UTF8_NOMIX_ASCII;
6418 case NREFFU: /* /\g{name}/iu */
6419 folder = foldEQ_latin1;
6420 fold_array = PL_fold_latin1;
6422 utf8_fold_flags = 0;
6425 case NREFF: /* /\g{name}/i */
6427 fold_array = PL_fold;
6429 utf8_fold_flags = 0;
6432 case NREF: /* /\g{name}/ */
6436 utf8_fold_flags = 0;
6439 /* For the named back references, find the corresponding buffer
6441 n = reg_check_named_buff_matched(rex,scan);
6446 goto do_nref_ref_common;
6448 case REFFL: /* /\1/il */
6449 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
6450 folder = foldEQ_locale;
6451 fold_array = PL_fold_locale;
6452 utf8_fold_flags = FOLDEQ_LOCALE;
6455 case REFFA: /* /\1/iaa */
6456 folder = foldEQ_latin1;
6457 fold_array = PL_fold_latin1;
6458 utf8_fold_flags = FOLDEQ_UTF8_NOMIX_ASCII;
6461 case REFFU: /* /\1/iu */
6462 folder = foldEQ_latin1;
6463 fold_array = PL_fold_latin1;
6464 utf8_fold_flags = 0;
6467 case REFF: /* /\1/i */
6469 fold_array = PL_fold;
6470 utf8_fold_flags = 0;
6473 case REF: /* /\1/ */
6476 utf8_fold_flags = 0;
6480 n = ARG(scan); /* which paren pair */
6483 ln = rex->offs[n].start;
6484 reginfo->poscache_iter = reginfo->poscache_maxiter; /* Void cache */
6485 if (rex->lastparen < n || ln == -1)
6486 sayNO; /* Do not match unless seen CLOSEn. */
6487 if (ln == rex->offs[n].end)
6490 s = reginfo->strbeg + ln;
6491 if (type != REF /* REF can do byte comparison */
6492 && (utf8_target || type == REFFU || type == REFFL))
6494 char * limit = reginfo->strend;
6496 /* This call case insensitively compares the entire buffer
6497 * at s, with the current input starting at locinput, but
6498 * not going off the end given by reginfo->strend, and
6499 * returns in <limit> upon success, how much of the
6500 * current input was matched */
6501 if (! foldEQ_utf8_flags(s, NULL, rex->offs[n].end - ln, utf8_target,
6502 locinput, &limit, 0, utf8_target, utf8_fold_flags))
6510 /* Not utf8: Inline the first character, for speed. */
6511 if (!NEXTCHR_IS_EOS &&
6512 UCHARAT(s) != nextchr &&
6514 UCHARAT(s) != fold_array[nextchr]))
6516 ln = rex->offs[n].end - ln;
6517 if (locinput + ln > reginfo->strend)
6519 if (ln > 1 && (type == REF
6520 ? memNE(s, locinput, ln)
6521 : ! folder(s, locinput, ln)))
6527 case NOTHING: /* null op; e.g. the 'nothing' following
6528 * the '*' in m{(a+|b)*}' */
6530 case TAIL: /* placeholder while compiling (A|B|C) */
6534 #define ST st->u.eval
6535 #define CUR_EVAL cur_eval->u.eval
6541 regexp_internal *rei;
6542 regnode *startpoint;
6545 case GOSUB: /* /(...(?1))/ /(...(?&foo))/ */
6546 arg= (U32)ARG(scan);
6547 if (cur_eval && cur_eval->locinput == locinput) {
6548 if ( ++nochange_depth > max_nochange_depth )
6550 "Pattern subroutine nesting without pos change"
6551 " exceeded limit in regex");
6558 startpoint = scan + ARG2L(scan);
6559 EVAL_CLOSE_PAREN_SET( st, arg );
6560 /* Detect infinite recursion
6562 * A pattern like /(?R)foo/ or /(?<x>(?&y)foo)(?<y>(?&x)bar)/
6563 * or "a"=~/(.(?2))((?<=(?=(?1)).))/ could recurse forever.
6564 * So we track the position in the string we are at each time
6565 * we recurse and if we try to enter the same routine twice from
6566 * the same position we throw an error.
6568 if ( rex->recurse_locinput[arg] == locinput ) {
6569 /* FIXME: we should show the regop that is failing as part
6570 * of the error message. */
6571 Perl_croak(aTHX_ "Infinite recursion in regex");
6573 ST.prev_recurse_locinput= rex->recurse_locinput[arg];
6574 rex->recurse_locinput[arg]= locinput;
6577 GET_RE_DEBUG_FLAGS_DECL;
6579 Perl_re_exec_indentf( aTHX_
6580 "entering GOSUB, prev_recurse_locinput=%p recurse_locinput[%d]=%p\n",
6581 depth, ST.prev_recurse_locinput, arg, rex->recurse_locinput[arg]
6587 /* Save all the positions seen so far. */
6588 ST.cp = regcppush(rex, 0, maxopenparen);
6589 REGCP_SET(ST.lastcp);
6591 /* and then jump to the code we share with EVAL */
6592 goto eval_recurse_doit;
6595 case EVAL: /* /(?{A})B/ /(??{A})B/ and /(?(?{A})X|Y)B/ */
6596 if (cur_eval && cur_eval->locinput==locinput) {
6597 if ( ++nochange_depth > max_nochange_depth )
6598 Perl_croak(aTHX_ "EVAL without pos change exceeded limit in regex");
6603 /* execute the code in the {...} */
6607 OP * const oop = PL_op;
6608 COP * const ocurcop = PL_curcop;
6612 /* save *all* paren positions */
6613 regcppush(rex, 0, maxopenparen);
6614 REGCP_SET(runops_cp);
6617 caller_cv = find_runcv(NULL);
6621 if (rexi->data->what[n] == 'r') { /* code from an external qr */
6623 (REGEXP*)(rexi->data->data[n])
6625 nop = (OP*)rexi->data->data[n+1];
6627 else if (rexi->data->what[n] == 'l') { /* literal code */
6629 nop = (OP*)rexi->data->data[n];
6630 assert(CvDEPTH(newcv));
6633 /* literal with own CV */
6634 assert(rexi->data->what[n] == 'L');
6635 newcv = rex->qr_anoncv;
6636 nop = (OP*)rexi->data->data[n];
6639 /* normally if we're about to execute code from the same
6640 * CV that we used previously, we just use the existing
6641 * CX stack entry. However, its possible that in the
6642 * meantime we may have backtracked, popped from the save
6643 * stack, and undone the SAVECOMPPAD(s) associated with
6644 * PUSH_MULTICALL; in which case PL_comppad no longer
6645 * points to newcv's pad. */
6646 if (newcv != last_pushed_cv || PL_comppad != last_pad)
6648 U8 flags = (CXp_SUB_RE |
6649 ((newcv == caller_cv) ? CXp_SUB_RE_FAKE : 0));
6650 if (last_pushed_cv) {
6651 /* PUSH/POP_MULTICALL save and restore the
6652 * caller's PL_comppad; if we call multiple subs
6653 * using the same CX block, we have to save and
6654 * unwind the varying PL_comppad's ourselves,
6655 * especially restoring the right PL_comppad on
6656 * backtrack - so save it on the save stack */
6658 CHANGE_MULTICALL_FLAGS(newcv, flags);
6661 PUSH_MULTICALL_FLAGS(newcv, flags);
6663 last_pushed_cv = newcv;
6666 /* these assignments are just to silence compiler
6668 multicall_cop = NULL;
6670 last_pad = PL_comppad;
6672 /* the initial nextstate you would normally execute
6673 * at the start of an eval (which would cause error
6674 * messages to come from the eval), may be optimised
6675 * away from the execution path in the regex code blocks;
6676 * so manually set PL_curcop to it initially */
6678 OP *o = cUNOPx(nop)->op_first;
6679 assert(o->op_type == OP_NULL);
6680 if (o->op_targ == OP_SCOPE) {
6681 o = cUNOPo->op_first;
6684 assert(o->op_targ == OP_LEAVE);
6685 o = cUNOPo->op_first;
6686 assert(o->op_type == OP_ENTER);
6690 if (o->op_type != OP_STUB) {
6691 assert( o->op_type == OP_NEXTSTATE
6692 || o->op_type == OP_DBSTATE
6693 || (o->op_type == OP_NULL
6694 && ( o->op_targ == OP_NEXTSTATE
6695 || o->op_targ == OP_DBSTATE
6699 PL_curcop = (COP*)o;
6704 DEBUG_STATE_r( Perl_re_printf( aTHX_
6705 " re EVAL PL_op=0x%"UVxf"\n", PTR2UV(nop)) );
6707 rex->offs[0].end = locinput - reginfo->strbeg;
6708 if (reginfo->info_aux_eval->pos_magic)
6709 MgBYTEPOS_set(reginfo->info_aux_eval->pos_magic,
6710 reginfo->sv, reginfo->strbeg,
6711 locinput - reginfo->strbeg);
6714 SV *sv_mrk = get_sv("REGMARK", 1);
6715 sv_setsv(sv_mrk, sv_yes_mark);
6718 /* we don't use MULTICALL here as we want to call the
6719 * first op of the block of interest, rather than the
6720 * first op of the sub. Also, we don't want to free
6721 * the savestack frame */
6722 before = (IV)(SP-PL_stack_base);
6724 CALLRUNOPS(aTHX); /* Scalar context. */
6726 if ((IV)(SP-PL_stack_base) == before)
6727 ret = &PL_sv_undef; /* protect against empty (?{}) blocks. */
6733 /* before restoring everything, evaluate the returned
6734 * value, so that 'uninit' warnings don't use the wrong
6735 * PL_op or pad. Also need to process any magic vars
6736 * (e.g. $1) *before* parentheses are restored */
6741 if (logical == 0) /* (?{})/ */
6742 sv_setsv(save_scalar(PL_replgv), ret); /* $^R */
6743 else if (logical == 1) { /* /(?(?{...})X|Y)/ */
6744 sw = cBOOL(SvTRUE(ret));
6747 else { /* /(??{}) */
6748 /* if its overloaded, let the regex compiler handle
6749 * it; otherwise extract regex, or stringify */
6750 if (SvGMAGICAL(ret))
6751 ret = sv_mortalcopy(ret);
6752 if (!SvAMAGIC(ret)) {
6756 if (SvTYPE(sv) == SVt_REGEXP)
6757 re_sv = (REGEXP*) sv;
6758 else if (SvSMAGICAL(ret)) {
6759 MAGIC *mg = mg_find(ret, PERL_MAGIC_qr);
6761 re_sv = (REGEXP *) mg->mg_obj;
6764 /* force any undef warnings here */
6765 if (!re_sv && !SvPOK(ret) && !SvNIOK(ret)) {
6766 ret = sv_mortalcopy(ret);
6767 (void) SvPV_force_nolen(ret);
6773 /* *** Note that at this point we don't restore
6774 * PL_comppad, (or pop the CxSUB) on the assumption it may
6775 * be used again soon. This is safe as long as nothing
6776 * in the regexp code uses the pad ! */
6778 PL_curcop = ocurcop;
6779 S_regcp_restore(aTHX_ rex, runops_cp, &maxopenparen);
6780 PL_curpm = PL_reg_curpm;
6786 /* only /(??{})/ from now on */
6789 /* extract RE object from returned value; compiling if
6793 re_sv = reg_temp_copy(NULL, re_sv);
6798 if (SvUTF8(ret) && IN_BYTES) {
6799 /* In use 'bytes': make a copy of the octet
6800 * sequence, but without the flag on */
6802 const char *const p = SvPV(ret, len);
6803 ret = newSVpvn_flags(p, len, SVs_TEMP);
6805 if (rex->intflags & PREGf_USE_RE_EVAL)
6806 pm_flags |= PMf_USE_RE_EVAL;
6808 /* if we got here, it should be an engine which
6809 * supports compiling code blocks and stuff */
6810 assert(rex->engine && rex->engine->op_comp);
6811 assert(!(scan->flags & ~RXf_PMf_COMPILETIME));
6812 re_sv = rex->engine->op_comp(aTHX_ &ret, 1, NULL,
6813 rex->engine, NULL, NULL,
6814 /* copy /msixn etc to inner pattern */
6819 & (SVs_TEMP | SVs_GMG | SVf_ROK))
6820 && (!SvPADTMP(ret) || SvREADONLY(ret))) {
6821 /* This isn't a first class regexp. Instead, it's
6822 caching a regexp onto an existing, Perl visible
6824 sv_magic(ret, MUTABLE_SV(re_sv), PERL_MAGIC_qr, 0, 0);
6830 RXp_MATCH_COPIED_off(re);
6831 re->subbeg = rex->subbeg;
6832 re->sublen = rex->sublen;
6833 re->suboffset = rex->suboffset;
6834 re->subcoffset = rex->subcoffset;
6836 re->lastcloseparen = 0;
6839 debug_start_match(re_sv, utf8_target, locinput,
6840 reginfo->strend, "Matching embedded");
6842 startpoint = rei->program + 1;
6843 EVAL_CLOSE_PAREN_CLEAR(st); /* ST.close_paren = 0;
6844 * close_paren only for GOSUB */
6845 ST.prev_recurse_locinput= NULL; /* only used for GOSUB */
6846 /* Save all the seen positions so far. */
6847 ST.cp = regcppush(rex, 0, maxopenparen);
6848 REGCP_SET(ST.lastcp);
6849 /* and set maxopenparen to 0, since we are starting a "fresh" match */
6851 /* run the pattern returned from (??{...}) */
6853 eval_recurse_doit: /* Share code with GOSUB below this line
6854 * At this point we expect the stack context to be
6855 * set up correctly */
6857 /* invalidate the S-L poscache. We're now executing a
6858 * different set of WHILEM ops (and their associated
6859 * indexes) against the same string, so the bits in the
6860 * cache are meaningless. Setting maxiter to zero forces
6861 * the cache to be invalidated and zeroed before reuse.
6862 * XXX This is too dramatic a measure. Ideally we should
6863 * save the old cache and restore when running the outer
6865 reginfo->poscache_maxiter = 0;
6867 /* the new regexp might have a different is_utf8_pat than we do */
6868 is_utf8_pat = reginfo->is_utf8_pat = cBOOL(RX_UTF8(re_sv));
6870 ST.prev_rex = rex_sv;
6871 ST.prev_curlyx = cur_curlyx;
6873 SET_reg_curpm(rex_sv);
6878 ST.prev_eval = cur_eval;
6880 /* now continue from first node in postoned RE */
6881 PUSH_YES_STATE_GOTO(EVAL_AB, startpoint, locinput);
6882 NOT_REACHED; /* NOTREACHED */
6885 case EVAL_AB: /* cleanup after a successful (??{A})B */
6887 Perl_re_exec_indentf( aTHX_ "EVAL_AB cur_eval=%p prev_eval=%p\n",
6888 depth, cur_eval, ST.prev_eval);
6891 #define SET_RECURSE_LOCINPUT(STR,VAL)\
6892 if ( cur_eval && CUR_EVAL.close_paren ) {\
6894 Perl_re_exec_indentf( aTHX_ STR " GOSUB%d ce=%p recurse_locinput=%p\n",\
6896 CUR_EVAL.close_paren - 1,\
6900 rex->recurse_locinput[CUR_EVAL.close_paren - 1] = VAL;\
6903 SET_RECURSE_LOCINPUT("EVAL_AB[before]", CUR_EVAL.prev_recurse_locinput);
6905 rex_sv = ST.prev_rex;
6906 is_utf8_pat = reginfo->is_utf8_pat = cBOOL(RX_UTF8(rex_sv));
6907 SET_reg_curpm(rex_sv);
6908 rex = ReANY(rex_sv);
6909 rexi = RXi_GET(rex);
6911 /* preserve $^R across LEAVE's. See Bug 121070. */
6912 SV *save_sv= GvSV(PL_replgv);
6913 SvREFCNT_inc(save_sv);
6914 regcpblow(ST.cp); /* LEAVE in disguise */
6915 sv_setsv(GvSV(PL_replgv), save_sv);
6916 SvREFCNT_dec(save_sv);
6918 cur_eval = ST.prev_eval;
6919 cur_curlyx = ST.prev_curlyx;
6921 /* Invalidate cache. See "invalidate" comment above. */
6922 reginfo->poscache_maxiter = 0;
6923 if ( nochange_depth )
6926 SET_RECURSE_LOCINPUT("EVAL_AB[after]", cur_eval->locinput);
6930 case EVAL_AB_fail: /* unsuccessfully ran A or B in (??{A})B */
6931 /* note: this is called twice; first after popping B, then A */
6933 Perl_re_exec_indentf( aTHX_ "EVAL_AB_fail cur_eval=%p prev_eval=%p\n",
6934 depth, cur_eval, ST.prev_eval);
6937 SET_RECURSE_LOCINPUT("EVAL_AB_fail[before]", CUR_EVAL.prev_recurse_locinput);
6939 rex_sv = ST.prev_rex;
6940 is_utf8_pat = reginfo->is_utf8_pat = cBOOL(RX_UTF8(rex_sv));
6941 SET_reg_curpm(rex_sv);
6942 rex = ReANY(rex_sv);
6943 rexi = RXi_GET(rex);
6945 REGCP_UNWIND(ST.lastcp);
6946 regcppop(rex, &maxopenparen);
6947 cur_eval = ST.prev_eval;
6948 cur_curlyx = ST.prev_curlyx;
6950 /* Invalidate cache. See "invalidate" comment above. */
6951 reginfo->poscache_maxiter = 0;
6952 if ( nochange_depth )
6955 SET_RECURSE_LOCINPUT("EVAL_AB_fail[after]", cur_eval->locinput);
6960 n = ARG(scan); /* which paren pair */
6961 rex->offs[n].start_tmp = locinput - reginfo->strbeg;
6962 if (n > maxopenparen)
6964 DEBUG_BUFFERS_r(Perl_re_printf( aTHX_
6965 "rex=0x%"UVxf" offs=0x%"UVxf": \\%"UVuf": set %"IVdf" tmp; maxopenparen=%"UVuf"\n",
6969 (IV)rex->offs[n].start_tmp,
6975 /* XXX really need to log other places start/end are set too */
6976 #define CLOSE_CAPTURE \
6977 rex->offs[n].start = rex->offs[n].start_tmp; \
6978 rex->offs[n].end = locinput - reginfo->strbeg; \
6979 DEBUG_BUFFERS_r(Perl_re_printf( aTHX_ \
6980 "rex=0x%"UVxf" offs=0x%"UVxf": \\%"UVuf": set %"IVdf"..%"IVdf"\n", \
6982 PTR2UV(rex->offs), \
6984 (IV)rex->offs[n].start, \
6985 (IV)rex->offs[n].end \
6989 n = ARG(scan); /* which paren pair */
6991 if (n > rex->lastparen)
6993 rex->lastcloseparen = n;
6994 if ( EVAL_CLOSE_PAREN_IS( cur_eval, n ) )
6999 case ACCEPT: /* (*ACCEPT) */
7001 sv_yes_mark = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
7005 cursor && OP(cursor)!=END;
7006 cursor=regnext(cursor))
7008 if ( OP(cursor)==CLOSE ){
7010 if ( n <= lastopen ) {
7012 if (n > rex->lastparen)
7014 rex->lastcloseparen = n;
7015 if ( n == ARG(scan) || EVAL_CLOSE_PAREN_IS(cur_eval, n) )
7024 case GROUPP: /* (?(1)) */
7025 n = ARG(scan); /* which paren pair */
7026 sw = cBOOL(rex->lastparen >= n && rex->offs[n].end != -1);
7029 case NGROUPP: /* (?(<name>)) */
7030 /* reg_check_named_buff_matched returns 0 for no match */
7031 sw = cBOOL(0 < reg_check_named_buff_matched(rex,scan));
7034 case INSUBP: /* (?(R)) */
7036 /* this does not need to use EVAL_CLOSE_PAREN macros, as the arg
7037 * of SCAN is already set up as matches a eval.close_paren */
7038 sw = cur_eval && (n == 0 || CUR_EVAL.close_paren == n);
7041 case DEFINEP: /* (?(DEFINE)) */
7045 case IFTHEN: /* (?(cond)A|B) */
7046 reginfo->poscache_iter = reginfo->poscache_maxiter; /* Void cache */
7048 next = NEXTOPER(NEXTOPER(scan));
7050 next = scan + ARG(scan);
7051 if (OP(next) == IFTHEN) /* Fake one. */
7052 next = NEXTOPER(NEXTOPER(next));
7056 case LOGICAL: /* modifier for EVAL and IFMATCH */
7057 logical = scan->flags;
7060 /*******************************************************************
7062 The CURLYX/WHILEM pair of ops handle the most generic case of the /A*B/
7063 pattern, where A and B are subpatterns. (For simple A, CURLYM or
7064 STAR/PLUS/CURLY/CURLYN are used instead.)
7066 A*B is compiled as <CURLYX><A><WHILEM><B>
7068 On entry to the subpattern, CURLYX is called. This pushes a CURLYX
7069 state, which contains the current count, initialised to -1. It also sets
7070 cur_curlyx to point to this state, with any previous value saved in the
7073 CURLYX then jumps straight to the WHILEM op, rather than executing A,
7074 since the pattern may possibly match zero times (i.e. it's a while {} loop
7075 rather than a do {} while loop).
7077 Each entry to WHILEM represents a successful match of A. The count in the
7078 CURLYX block is incremented, another WHILEM state is pushed, and execution
7079 passes to A or B depending on greediness and the current count.
7081 For example, if matching against the string a1a2a3b (where the aN are
7082 substrings that match /A/), then the match progresses as follows: (the
7083 pushed states are interspersed with the bits of strings matched so far):
7086 <CURLYX cnt=0><WHILEM>
7087 <CURLYX cnt=1><WHILEM> a1 <WHILEM>
7088 <CURLYX cnt=2><WHILEM> a1 <WHILEM> a2 <WHILEM>
7089 <CURLYX cnt=3><WHILEM> a1 <WHILEM> a2 <WHILEM> a3 <WHILEM>
7090 <CURLYX cnt=3><WHILEM> a1 <WHILEM> a2 <WHILEM> a3 <WHILEM> b
7092 (Contrast this with something like CURLYM, which maintains only a single
7096 a1 <CURLYM cnt=1> a2
7097 a1 a2 <CURLYM cnt=2> a3
7098 a1 a2 a3 <CURLYM cnt=3> b
7101 Each WHILEM state block marks a point to backtrack to upon partial failure
7102 of A or B, and also contains some minor state data related to that
7103 iteration. The CURLYX block, pointed to by cur_curlyx, contains the
7104 overall state, such as the count, and pointers to the A and B ops.
7106 This is complicated slightly by nested CURLYX/WHILEM's. Since cur_curlyx
7107 must always point to the *current* CURLYX block, the rules are:
7109 When executing CURLYX, save the old cur_curlyx in the CURLYX state block,
7110 and set cur_curlyx to point the new block.
7112 When popping the CURLYX block after a successful or unsuccessful match,
7113 restore the previous cur_curlyx.
7115 When WHILEM is about to execute B, save the current cur_curlyx, and set it
7116 to the outer one saved in the CURLYX block.
7118 When popping the WHILEM block after a successful or unsuccessful B match,
7119 restore the previous cur_curlyx.
7121 Here's an example for the pattern (AI* BI)*BO
7122 I and O refer to inner and outer, C and W refer to CURLYX and WHILEM:
7125 curlyx backtrack stack
7126 ------ ---------------
7128 CO <CO prev=NULL> <WO>
7129 CI <CO prev=NULL> <WO> <CI prev=CO> <WI> ai
7130 CO <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi
7131 NULL <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi <WO prev=CO> bo
7133 At this point the pattern succeeds, and we work back down the stack to
7134 clean up, restoring as we go:
7136 CO <CO prev=NULL> <WO> <CI prev=CO> <WI> ai <WI prev=CI> bi
7137 CI <CO prev=NULL> <WO> <CI prev=CO> <WI> ai
7138 CO <CO prev=NULL> <WO>
7141 *******************************************************************/
7143 #define ST st->u.curlyx
7145 case CURLYX: /* start of /A*B/ (for complex A) */
7147 /* No need to save/restore up to this paren */
7148 I32 parenfloor = scan->flags;
7150 assert(next); /* keep Coverity happy */
7151 if (OP(PREVOPER(next)) == NOTHING) /* LONGJMP */
7154 /* XXXX Probably it is better to teach regpush to support
7155 parenfloor > maxopenparen ... */
7156 if (parenfloor > (I32)rex->lastparen)
7157 parenfloor = rex->lastparen; /* Pessimization... */
7159 ST.prev_curlyx= cur_curlyx;
7161 ST.cp = PL_savestack_ix;
7163 /* these fields contain the state of the current curly.
7164 * they are accessed by subsequent WHILEMs */
7165 ST.parenfloor = parenfloor;
7170 ST.count = -1; /* this will be updated by WHILEM */
7171 ST.lastloc = NULL; /* this will be updated by WHILEM */
7173 PUSH_YES_STATE_GOTO(CURLYX_end, PREVOPER(next), locinput);
7174 NOT_REACHED; /* NOTREACHED */
7177 case CURLYX_end: /* just finished matching all of A*B */
7178 cur_curlyx = ST.prev_curlyx;
7180 NOT_REACHED; /* NOTREACHED */
7182 case CURLYX_end_fail: /* just failed to match all of A*B */
7184 cur_curlyx = ST.prev_curlyx;
7186 NOT_REACHED; /* NOTREACHED */
7190 #define ST st->u.whilem
7192 case WHILEM: /* just matched an A in /A*B/ (for complex A) */
7194 /* see the discussion above about CURLYX/WHILEM */
7199 assert(cur_curlyx); /* keep Coverity happy */
7201 min = ARG1(cur_curlyx->u.curlyx.me);
7202 max = ARG2(cur_curlyx->u.curlyx.me);
7203 A = NEXTOPER(cur_curlyx->u.curlyx.me) + EXTRA_STEP_2ARGS;
7204 n = ++cur_curlyx->u.curlyx.count; /* how many A's matched */
7205 ST.save_lastloc = cur_curlyx->u.curlyx.lastloc;
7206 ST.cache_offset = 0;
7210 DEBUG_EXECUTE_r( Perl_re_exec_indentf( aTHX_ "whilem: matched %ld out of %d..%d\n",
7211 depth, (long)n, min, max)
7214 /* First just match a string of min A's. */
7217 ST.cp = regcppush(rex, cur_curlyx->u.curlyx.parenfloor,
7219 cur_curlyx->u.curlyx.lastloc = locinput;
7220 REGCP_SET(ST.lastcp);
7222 PUSH_STATE_GOTO(WHILEM_A_pre, A, locinput);
7223 NOT_REACHED; /* NOTREACHED */
7226 /* If degenerate A matches "", assume A done. */
7228 if (locinput == cur_curlyx->u.curlyx.lastloc) {
7229 DEBUG_EXECUTE_r( Perl_re_exec_indentf( aTHX_ "whilem: empty match detected, trying continuation...\n",
7232 goto do_whilem_B_max;
7235 /* super-linear cache processing.
7237 * The idea here is that for certain types of CURLYX/WHILEM -
7238 * principally those whose upper bound is infinity (and
7239 * excluding regexes that have things like \1 and other very
7240 * non-regular expresssiony things), then if a pattern like
7241 * /....A*.../ fails and we backtrack to the WHILEM, then we
7242 * make a note that this particular WHILEM op was at string
7243 * position 47 (say) when the rest of pattern failed. Then, if
7244 * we ever find ourselves back at that WHILEM, and at string
7245 * position 47 again, we can just fail immediately rather than
7246 * running the rest of the pattern again.
7248 * This is very handy when patterns start to go
7249 * 'super-linear', like in (a+)*(a+)*(a+)*, where you end up
7250 * with a combinatorial explosion of backtracking.
7252 * The cache is implemented as a bit array, with one bit per
7253 * string byte position per WHILEM op (up to 16) - so its
7254 * between 0.25 and 2x the string size.
7256 * To avoid allocating a poscache buffer every time, we do an
7257 * initially countdown; only after we have executed a WHILEM
7258 * op (string-length x #WHILEMs) times do we allocate the
7261 * The top 4 bits of scan->flags byte say how many different
7262 * relevant CURLLYX/WHILEM op pairs there are, while the
7263 * bottom 4-bits is the identifying index number of this
7269 if (!reginfo->poscache_maxiter) {
7270 /* start the countdown: Postpone detection until we
7271 * know the match is not *that* much linear. */
7272 reginfo->poscache_maxiter
7273 = (reginfo->strend - reginfo->strbeg + 1)
7275 /* possible overflow for long strings and many CURLYX's */
7276 if (reginfo->poscache_maxiter < 0)
7277 reginfo->poscache_maxiter = I32_MAX;
7278 reginfo->poscache_iter = reginfo->poscache_maxiter;
7281 if (reginfo->poscache_iter-- == 0) {
7282 /* initialise cache */
7283 const SSize_t size = (reginfo->poscache_maxiter + 7)/8;
7284 regmatch_info_aux *const aux = reginfo->info_aux;
7285 if (aux->poscache) {
7286 if ((SSize_t)reginfo->poscache_size < size) {
7287 Renew(aux->poscache, size, char);
7288 reginfo->poscache_size = size;
7290 Zero(aux->poscache, size, char);
7293 reginfo->poscache_size = size;
7294 Newxz(aux->poscache, size, char);
7296 DEBUG_EXECUTE_r( Perl_re_printf( aTHX_
7297 "%swhilem: Detected a super-linear match, switching on caching%s...\n",
7298 PL_colors[4], PL_colors[5])
7302 if (reginfo->poscache_iter < 0) {
7303 /* have we already failed at this position? */
7304 SSize_t offset, mask;
7306 reginfo->poscache_iter = -1; /* stop eventual underflow */
7307 offset = (scan->flags & 0xf) - 1
7308 + (locinput - reginfo->strbeg)
7310 mask = 1 << (offset % 8);
7312 if (reginfo->info_aux->poscache[offset] & mask) {
7313 DEBUG_EXECUTE_r( Perl_re_exec_indentf( aTHX_ "whilem: (cache) already tried at this position...\n",
7316 sayNO; /* cache records failure */
7318 ST.cache_offset = offset;
7319 ST.cache_mask = mask;
7323 /* Prefer B over A for minimal matching. */
7325 if (cur_curlyx->u.curlyx.minmod) {
7326 ST.save_curlyx = cur_curlyx;
7327 cur_curlyx = cur_curlyx->u.curlyx.prev_curlyx;
7328 ST.cp = regcppush(rex, ST.save_curlyx->u.curlyx.parenfloor,
7330 REGCP_SET(ST.lastcp);
7331 PUSH_YES_STATE_GOTO(WHILEM_B_min, ST.save_curlyx->u.curlyx.B,
7333 NOT_REACHED; /* NOTREACHED */
7336 /* Prefer A over B for maximal matching. */
7338 if (n < max) { /* More greed allowed? */
7339 ST.cp = regcppush(rex, cur_curlyx->u.curlyx.parenfloor,
7341 cur_curlyx->u.curlyx.lastloc = locinput;
7342 REGCP_SET(ST.lastcp);
7343 PUSH_STATE_GOTO(WHILEM_A_max, A, locinput);
7344 NOT_REACHED; /* NOTREACHED */
7346 goto do_whilem_B_max;
7348 NOT_REACHED; /* NOTREACHED */
7350 case WHILEM_B_min: /* just matched B in a minimal match */
7351 case WHILEM_B_max: /* just matched B in a maximal match */
7352 cur_curlyx = ST.save_curlyx;
7354 NOT_REACHED; /* NOTREACHED */
7356 case WHILEM_B_max_fail: /* just failed to match B in a maximal match */
7357 cur_curlyx = ST.save_curlyx;
7358 cur_curlyx->u.curlyx.lastloc = ST.save_lastloc;
7359 cur_curlyx->u.curlyx.count--;
7361 NOT_REACHED; /* NOTREACHED */
7363 case WHILEM_A_min_fail: /* just failed to match A in a minimal match */
7365 case WHILEM_A_pre_fail: /* just failed to match even minimal A */
7366 REGCP_UNWIND(ST.lastcp);
7367 regcppop(rex, &maxopenparen);
7368 cur_curlyx->u.curlyx.lastloc = ST.save_lastloc;
7369 cur_curlyx->u.curlyx.count--;
7371 NOT_REACHED; /* NOTREACHED */
7373 case WHILEM_A_max_fail: /* just failed to match A in a maximal match */
7374 REGCP_UNWIND(ST.lastcp);
7375 regcppop(rex, &maxopenparen); /* Restore some previous $<digit>s? */
7376 DEBUG_EXECUTE_r(Perl_re_exec_indentf( aTHX_ "whilem: failed, trying continuation...\n",
7380 if (cur_curlyx->u.curlyx.count >= REG_INFTY
7381 && ckWARN(WARN_REGEXP)
7382 && !reginfo->warned)
7384 reginfo->warned = TRUE;
7385 Perl_warner(aTHX_ packWARN(WARN_REGEXP),
7386 "Complex regular subexpression recursion limit (%d) "
7392 ST.save_curlyx = cur_curlyx;
7393 cur_curlyx = cur_curlyx->u.curlyx.prev_curlyx;
7394 PUSH_YES_STATE_GOTO(WHILEM_B_max, ST.save_curlyx->u.curlyx.B,
7396 NOT_REACHED; /* NOTREACHED */
7398 case WHILEM_B_min_fail: /* just failed to match B in a minimal match */
7399 cur_curlyx = ST.save_curlyx;
7400 REGCP_UNWIND(ST.lastcp);
7401 regcppop(rex, &maxopenparen);
7403 if (cur_curlyx->u.curlyx.count >= /*max*/ARG2(cur_curlyx->u.curlyx.me)) {
7404 /* Maximum greed exceeded */
7405 if (cur_curlyx->u.curlyx.count >= REG_INFTY
7406 && ckWARN(WARN_REGEXP)
7407 && !reginfo->warned)
7409 reginfo->warned = TRUE;
7410 Perl_warner(aTHX_ packWARN(WARN_REGEXP),
7411 "Complex regular subexpression recursion "
7412 "limit (%d) exceeded",
7415 cur_curlyx->u.curlyx.count--;
7419 DEBUG_EXECUTE_r(Perl_re_exec_indentf( aTHX_ "trying longer...\n", depth)
7421 /* Try grabbing another A and see if it helps. */
7422 cur_curlyx->u.curlyx.lastloc = locinput;
7423 ST.cp = regcppush(rex, cur_curlyx->u.curlyx.parenfloor,
7425 REGCP_SET(ST.lastcp);
7426 PUSH_STATE_GOTO(WHILEM_A_min,
7427 /*A*/ NEXTOPER(ST.save_curlyx->u.curlyx.me) + EXTRA_STEP_2ARGS,
7429 NOT_REACHED; /* NOTREACHED */
7432 #define ST st->u.branch
7434 case BRANCHJ: /* /(...|A|...)/ with long next pointer */
7435 next = scan + ARG(scan);
7438 scan = NEXTOPER(scan);
7441 case BRANCH: /* /(...|A|...)/ */
7442 scan = NEXTOPER(scan); /* scan now points to inner node */
7443 ST.lastparen = rex->lastparen;
7444 ST.lastcloseparen = rex->lastcloseparen;
7445 ST.next_branch = next;
7448 /* Now go into the branch */
7450 PUSH_YES_STATE_GOTO(BRANCH_next, scan, locinput);
7452 PUSH_STATE_GOTO(BRANCH_next, scan, locinput);
7454 NOT_REACHED; /* NOTREACHED */
7456 case CUTGROUP: /* /(*THEN)/ */
7457 sv_yes_mark = st->u.mark.mark_name = scan->flags
7458 ? MUTABLE_SV(rexi->data->data[ ARG( scan ) ])
7460 PUSH_STATE_GOTO(CUTGROUP_next, next, locinput);
7461 NOT_REACHED; /* NOTREACHED */
7463 case CUTGROUP_next_fail:
7466 if (st->u.mark.mark_name)
7467 sv_commit = st->u.mark.mark_name;
7469 NOT_REACHED; /* NOTREACHED */
7473 NOT_REACHED; /* NOTREACHED */
7475 case BRANCH_next_fail: /* that branch failed; try the next, if any */
7480 REGCP_UNWIND(ST.cp);
7481 UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
7482 scan = ST.next_branch;
7483 /* no more branches? */
7484 if (!scan || (OP(scan) != BRANCH && OP(scan) != BRANCHJ)) {
7486 Perl_re_exec_indentf( aTHX_ "%sBRANCH failed...%s\n",
7493 continue; /* execute next BRANCH[J] op */
7496 case MINMOD: /* next op will be non-greedy, e.g. A*? */
7501 #define ST st->u.curlym
7503 case CURLYM: /* /A{m,n}B/ where A is fixed-length */
7505 /* This is an optimisation of CURLYX that enables us to push
7506 * only a single backtracking state, no matter how many matches
7507 * there are in {m,n}. It relies on the pattern being constant
7508 * length, with no parens to influence future backrefs
7512 scan = NEXTOPER(scan) + NODE_STEP_REGNODE;
7514 ST.lastparen = rex->lastparen;
7515 ST.lastcloseparen = rex->lastcloseparen;
7517 /* if paren positive, emulate an OPEN/CLOSE around A */
7519 U32 paren = ST.me->flags;
7520 if (paren > maxopenparen)
7521 maxopenparen = paren;
7522 scan += NEXT_OFF(scan); /* Skip former OPEN. */
7530 ST.c1 = CHRTEST_UNINIT;
7533 if (!(ST.minmod ? ARG1(ST.me) : ARG2(ST.me))) /* min/max */
7536 curlym_do_A: /* execute the A in /A{m,n}B/ */
7537 PUSH_YES_STATE_GOTO(CURLYM_A, ST.A, locinput); /* match A */
7538 NOT_REACHED; /* NOTREACHED */
7540 case CURLYM_A: /* we've just matched an A */
7542 /* after first match, determine A's length: u.curlym.alen */
7543 if (ST.count == 1) {
7544 if (reginfo->is_utf8_target) {
7545 char *s = st->locinput;
7546 while (s < locinput) {
7552 ST.alen = locinput - st->locinput;
7555 ST.count = ST.minmod ? ARG1(ST.me) : ARG2(ST.me);
7558 Perl_re_exec_indentf( aTHX_ "CURLYM now matched %"IVdf" times, len=%"IVdf"...\n",
7559 depth, (IV) ST.count, (IV)ST.alen)
7562 if (EVAL_CLOSE_PAREN_IS_TRUE(cur_eval,(U32)ST.me->flags))
7566 I32 max = (ST.minmod ? ARG1(ST.me) : ARG2(ST.me));
7567 if ( max == REG_INFTY || ST.count < max )
7568 goto curlym_do_A; /* try to match another A */
7570 goto curlym_do_B; /* try to match B */
7572 case CURLYM_A_fail: /* just failed to match an A */
7573 REGCP_UNWIND(ST.cp);
7576 if (ST.minmod || ST.count < ARG1(ST.me) /* min*/
7577 || EVAL_CLOSE_PAREN_IS_TRUE(cur_eval,(U32)ST.me->flags))
7580 curlym_do_B: /* execute the B in /A{m,n}B/ */
7581 if (ST.c1 == CHRTEST_UNINIT) {
7582 /* calculate c1 and c2 for possible match of 1st char
7583 * following curly */
7584 ST.c1 = ST.c2 = CHRTEST_VOID;
7586 if (HAS_TEXT(ST.B) || JUMPABLE(ST.B)) {
7587 regnode *text_node = ST.B;
7588 if (! HAS_TEXT(text_node))
7589 FIND_NEXT_IMPT(text_node);
7592 (HAS_TEXT(text_node) && PL_regkind[OP(text_node)] == EXACT)
7594 But the former is redundant in light of the latter.
7596 if this changes back then the macro for
7597 IS_TEXT and friends need to change.
7599 if (PL_regkind[OP(text_node)] == EXACT) {
7600 if (! S_setup_EXACTISH_ST_c1_c2(aTHX_
7601 text_node, &ST.c1, ST.c1_utf8, &ST.c2, ST.c2_utf8,
7611 Perl_re_exec_indentf( aTHX_ "CURLYM trying tail with matches=%"IVdf"...\n",
7612 depth, (IV)ST.count)
7614 if (! NEXTCHR_IS_EOS && ST.c1 != CHRTEST_VOID) {
7615 if (! UTF8_IS_INVARIANT(nextchr) && utf8_target) {
7616 if (memNE(locinput, ST.c1_utf8, UTF8SKIP(locinput))
7617 && memNE(locinput, ST.c2_utf8, UTF8SKIP(locinput)))
7619 /* simulate B failing */
7621 Perl_re_exec_indentf( aTHX_ "CURLYM Fast bail next target=0x%"UVXf" c1=0x%"UVXf" c2=0x%"UVXf"\n",
7623 valid_utf8_to_uvchr((U8 *) locinput, NULL),
7624 valid_utf8_to_uvchr(ST.c1_utf8, NULL),
7625 valid_utf8_to_uvchr(ST.c2_utf8, NULL))
7627 state_num = CURLYM_B_fail;
7628 goto reenter_switch;
7631 else if (nextchr != ST.c1 && nextchr != ST.c2) {
7632 /* simulate B failing */
7634 Perl_re_exec_indentf( aTHX_ "CURLYM Fast bail next target=0x%X c1=0x%X c2=0x%X\n",
7636 (int) nextchr, ST.c1, ST.c2)
7638 state_num = CURLYM_B_fail;
7639 goto reenter_switch;
7644 /* emulate CLOSE: mark current A as captured */
7645 I32 paren = ST.me->flags;
7647 rex->offs[paren].start
7648 = HOPc(locinput, -ST.alen) - reginfo->strbeg;
7649 rex->offs[paren].end = locinput - reginfo->strbeg;
7650 if ((U32)paren > rex->lastparen)
7651 rex->lastparen = paren;
7652 rex->lastcloseparen = paren;
7655 rex->offs[paren].end = -1;
7657 if (EVAL_CLOSE_PAREN_IS_TRUE(cur_eval,(U32)ST.me->flags))
7666 PUSH_STATE_GOTO(CURLYM_B, ST.B, locinput); /* match B */
7667 NOT_REACHED; /* NOTREACHED */
7669 case CURLYM_B_fail: /* just failed to match a B */
7670 REGCP_UNWIND(ST.cp);
7671 UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
7673 I32 max = ARG2(ST.me);
7674 if (max != REG_INFTY && ST.count == max)
7676 goto curlym_do_A; /* try to match a further A */
7678 /* backtrack one A */
7679 if (ST.count == ARG1(ST.me) /* min */)
7682 SET_locinput(HOPc(locinput, -ST.alen));
7683 goto curlym_do_B; /* try to match B */
7686 #define ST st->u.curly
7688 #define CURLY_SETPAREN(paren, success) \
7691 rex->offs[paren].start = HOPc(locinput, -1) - reginfo->strbeg; \
7692 rex->offs[paren].end = locinput - reginfo->strbeg; \
7693 if (paren > rex->lastparen) \
7694 rex->lastparen = paren; \
7695 rex->lastcloseparen = paren; \
7698 rex->offs[paren].end = -1; \
7699 rex->lastparen = ST.lastparen; \
7700 rex->lastcloseparen = ST.lastcloseparen; \
7704 case STAR: /* /A*B/ where A is width 1 char */
7708 scan = NEXTOPER(scan);
7711 case PLUS: /* /A+B/ where A is width 1 char */
7715 scan = NEXTOPER(scan);
7718 case CURLYN: /* /(A){m,n}B/ where A is width 1 char */
7719 ST.paren = scan->flags; /* Which paren to set */
7720 ST.lastparen = rex->lastparen;
7721 ST.lastcloseparen = rex->lastcloseparen;
7722 if (ST.paren > maxopenparen)
7723 maxopenparen = ST.paren;
7724 ST.min = ARG1(scan); /* min to match */
7725 ST.max = ARG2(scan); /* max to match */
7726 if (EVAL_CLOSE_PAREN_IS_TRUE(cur_eval,(U32)ST.paren))
7731 scan = regnext(NEXTOPER(scan) + NODE_STEP_REGNODE);
7734 case CURLY: /* /A{m,n}B/ where A is width 1 char */
7736 ST.min = ARG1(scan); /* min to match */
7737 ST.max = ARG2(scan); /* max to match */
7738 scan = NEXTOPER(scan) + NODE_STEP_REGNODE;
7741 * Lookahead to avoid useless match attempts
7742 * when we know what character comes next.
7744 * Used to only do .*x and .*?x, but now it allows
7745 * for )'s, ('s and (?{ ... })'s to be in the way
7746 * of the quantifier and the EXACT-like node. -- japhy
7749 assert(ST.min <= ST.max);
7750 if (! HAS_TEXT(next) && ! JUMPABLE(next)) {
7751 ST.c1 = ST.c2 = CHRTEST_VOID;
7754 regnode *text_node = next;
7756 if (! HAS_TEXT(text_node))
7757 FIND_NEXT_IMPT(text_node);
7759 if (! HAS_TEXT(text_node))
7760 ST.c1 = ST.c2 = CHRTEST_VOID;
7762 if ( PL_regkind[OP(text_node)] != EXACT ) {
7763 ST.c1 = ST.c2 = CHRTEST_VOID;
7767 /* Currently we only get here when
7769 PL_rekind[OP(text_node)] == EXACT
7771 if this changes back then the macro for IS_TEXT and
7772 friends need to change. */
7773 if (! S_setup_EXACTISH_ST_c1_c2(aTHX_
7774 text_node, &ST.c1, ST.c1_utf8, &ST.c2, ST.c2_utf8,
7786 char *li = locinput;
7789 regrepeat(rex, &li, ST.A, reginfo, ST.min, depth)
7795 if (ST.c1 == CHRTEST_VOID)
7796 goto curly_try_B_min;
7798 ST.oldloc = locinput;
7800 /* set ST.maxpos to the furthest point along the
7801 * string that could possibly match */
7802 if (ST.max == REG_INFTY) {
7803 ST.maxpos = reginfo->strend - 1;
7805 while (UTF8_IS_CONTINUATION(*(U8*)ST.maxpos))
7808 else if (utf8_target) {
7809 int m = ST.max - ST.min;
7810 for (ST.maxpos = locinput;
7811 m >0 && ST.maxpos < reginfo->strend; m--)
7812 ST.maxpos += UTF8SKIP(ST.maxpos);
7815 ST.maxpos = locinput + ST.max - ST.min;
7816 if (ST.maxpos >= reginfo->strend)
7817 ST.maxpos = reginfo->strend - 1;
7819 goto curly_try_B_min_known;
7823 /* avoid taking address of locinput, so it can remain
7825 char *li = locinput;
7826 ST.count = regrepeat(rex, &li, ST.A, reginfo, ST.max, depth);
7827 if (ST.count < ST.min)
7830 if ((ST.count > ST.min)
7831 && (PL_regkind[OP(ST.B)] == EOL) && (OP(ST.B) != MEOL))
7833 /* A{m,n} must come at the end of the string, there's
7834 * no point in backing off ... */
7836 /* ...except that $ and \Z can match before *and* after
7837 newline at the end. Consider "\n\n" =~ /\n+\Z\n/.
7838 We may back off by one in this case. */
7839 if (UCHARAT(locinput - 1) == '\n' && OP(ST.B) != EOS)
7843 goto curly_try_B_max;
7845 NOT_REACHED; /* NOTREACHED */
7847 case CURLY_B_min_known_fail:
7848 /* failed to find B in a non-greedy match where c1,c2 valid */
7850 REGCP_UNWIND(ST.cp);
7852 UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
7854 /* Couldn't or didn't -- move forward. */
7855 ST.oldloc = locinput;
7857 locinput += UTF8SKIP(locinput);
7861 curly_try_B_min_known:
7862 /* find the next place where 'B' could work, then call B */
7866 n = (ST.oldloc == locinput) ? 0 : 1;
7867 if (ST.c1 == ST.c2) {
7868 /* set n to utf8_distance(oldloc, locinput) */
7869 while (locinput <= ST.maxpos
7870 && memNE(locinput, ST.c1_utf8, UTF8SKIP(locinput)))
7872 locinput += UTF8SKIP(locinput);
7877 /* set n to utf8_distance(oldloc, locinput) */
7878 while (locinput <= ST.maxpos
7879 && memNE(locinput, ST.c1_utf8, UTF8SKIP(locinput))
7880 && memNE(locinput, ST.c2_utf8, UTF8SKIP(locinput)))
7882 locinput += UTF8SKIP(locinput);
7887 else { /* Not utf8_target */
7888 if (ST.c1 == ST.c2) {
7889 while (locinput <= ST.maxpos &&
7890 UCHARAT(locinput) != ST.c1)
7894 while (locinput <= ST.maxpos
7895 && UCHARAT(locinput) != ST.c1
7896 && UCHARAT(locinput) != ST.c2)
7899 n = locinput - ST.oldloc;
7901 if (locinput > ST.maxpos)
7904 /* In /a{m,n}b/, ST.oldloc is at "a" x m, locinput is
7905 * at b; check that everything between oldloc and
7906 * locinput matches */
7907 char *li = ST.oldloc;
7909 if (regrepeat(rex, &li, ST.A, reginfo, n, depth) < n)
7911 assert(n == REG_INFTY || locinput == li);
7913 CURLY_SETPAREN(ST.paren, ST.count);
7914 if (EVAL_CLOSE_PAREN_IS_TRUE(cur_eval,(U32)ST.paren))
7916 PUSH_STATE_GOTO(CURLY_B_min_known, ST.B, locinput);
7918 NOT_REACHED; /* NOTREACHED */
7920 case CURLY_B_min_fail:
7921 /* failed to find B in a non-greedy match where c1,c2 invalid */
7923 REGCP_UNWIND(ST.cp);
7925 UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
7927 /* failed -- move forward one */
7929 char *li = locinput;
7930 if (!regrepeat(rex, &li, ST.A, reginfo, 1, depth)) {
7937 if (ST.count <= ST.max || (ST.max == REG_INFTY &&
7938 ST.count > 0)) /* count overflow ? */
7941 CURLY_SETPAREN(ST.paren, ST.count);
7942 if (EVAL_CLOSE_PAREN_IS_TRUE(cur_eval,(U32)ST.paren))
7944 PUSH_STATE_GOTO(CURLY_B_min, ST.B, locinput);
7948 NOT_REACHED; /* NOTREACHED */
7951 /* a successful greedy match: now try to match B */
7952 if (EVAL_CLOSE_PAREN_IS_TRUE(cur_eval,(U32)ST.paren))
7955 bool could_match = locinput < reginfo->strend;
7957 /* If it could work, try it. */
7958 if (ST.c1 != CHRTEST_VOID && could_match) {
7959 if (! UTF8_IS_INVARIANT(UCHARAT(locinput)) && utf8_target)
7961 could_match = memEQ(locinput,
7966 UTF8SKIP(locinput));
7969 could_match = UCHARAT(locinput) == ST.c1
7970 || UCHARAT(locinput) == ST.c2;
7973 if (ST.c1 == CHRTEST_VOID || could_match) {
7974 CURLY_SETPAREN(ST.paren, ST.count);
7975 PUSH_STATE_GOTO(CURLY_B_max, ST.B, locinput);
7976 NOT_REACHED; /* NOTREACHED */
7981 case CURLY_B_max_fail:
7982 /* failed to find B in a greedy match */
7984 REGCP_UNWIND(ST.cp);
7986 UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
7989 if (--ST.count < ST.min)
7991 locinput = HOPc(locinput, -1);
7992 goto curly_try_B_max;
7996 case END: /* last op of main pattern */
7999 /* we've just finished A in /(??{A})B/; now continue with B */
8000 SET_RECURSE_LOCINPUT("FAKE-END[before]", CUR_EVAL.prev_recurse_locinput);
8001 st->u.eval.prev_rex = rex_sv; /* inner */
8003 /* Save *all* the positions. */
8004 st->u.eval.cp = regcppush(rex, 0, maxopenparen);
8005 rex_sv = CUR_EVAL.prev_rex;
8006 is_utf8_pat = reginfo->is_utf8_pat = cBOOL(RX_UTF8(rex_sv));
8007 SET_reg_curpm(rex_sv);
8008 rex = ReANY(rex_sv);
8009 rexi = RXi_GET(rex);
8011 st->u.eval.prev_curlyx = cur_curlyx;
8012 cur_curlyx = CUR_EVAL.prev_curlyx;
8014 REGCP_SET(st->u.eval.lastcp);
8016 /* Restore parens of the outer rex without popping the
8018 S_regcp_restore(aTHX_ rex, CUR_EVAL.lastcp,
8021 st->u.eval.prev_eval = cur_eval;
8022 cur_eval = CUR_EVAL.prev_eval;
8024 Perl_re_exec_indentf( aTHX_ "EVAL trying tail ... (cur_eval=%p)\n",
8026 if ( nochange_depth )
8029 SET_RECURSE_LOCINPUT("FAKE-END[after]", cur_eval->locinput);
8031 PUSH_YES_STATE_GOTO(EVAL_AB, st->u.eval.prev_eval->u.eval.B,
8032 locinput); /* match B */
8035 if (locinput < reginfo->till) {
8036 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
8037 "%sMatch possible, but length=%ld is smaller than requested=%ld, failing!%s\n",
8039 (long)(locinput - startpos),
8040 (long)(reginfo->till - startpos),
8043 sayNO_SILENT; /* Cannot match: too short. */
8045 sayYES; /* Success! */
8047 case SUCCEED: /* successful SUSPEND/UNLESSM/IFMATCH/CURLYM */
8049 Perl_re_exec_indentf( aTHX_ "%ssubpattern success...%s\n",
8050 depth, PL_colors[4], PL_colors[5]));
8051 sayYES; /* Success! */
8054 #define ST st->u.ifmatch
8059 case SUSPEND: /* (?>A) */
8061 newstart = locinput;
8064 case UNLESSM: /* -ve lookaround: (?!A), or with flags, (?<!A) */
8066 goto ifmatch_trivial_fail_test;
8068 case IFMATCH: /* +ve lookaround: (?=A), or with flags, (?<=A) */
8070 ifmatch_trivial_fail_test:
8072 char * const s = HOPBACKc(locinput, scan->flags);
8077 sw = 1 - cBOOL(ST.wanted);
8081 next = scan + ARG(scan);
8089 newstart = locinput;
8093 ST.logical = logical;
8094 logical = 0; /* XXX: reset state of logical once it has been saved into ST */
8096 /* execute body of (?...A) */
8097 PUSH_YES_STATE_GOTO(IFMATCH_A, NEXTOPER(NEXTOPER(scan)), newstart);
8098 NOT_REACHED; /* NOTREACHED */
8101 case IFMATCH_A_fail: /* body of (?...A) failed */
8102 ST.wanted = !ST.wanted;
8105 case IFMATCH_A: /* body of (?...A) succeeded */
8107 sw = cBOOL(ST.wanted);
8109 else if (!ST.wanted)
8112 if (OP(ST.me) != SUSPEND) {
8113 /* restore old position except for (?>...) */
8114 locinput = st->locinput;
8116 scan = ST.me + ARG(ST.me);
8119 continue; /* execute B */
8123 case LONGJMP: /* alternative with many branches compiles to
8124 * (BRANCHJ; EXACT ...; LONGJMP ) x N */
8125 next = scan + ARG(scan);
8130 case COMMIT: /* (*COMMIT) */
8131 reginfo->cutpoint = reginfo->strend;
8134 case PRUNE: /* (*PRUNE) */
8136 sv_yes_mark = sv_commit = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
8137 PUSH_STATE_GOTO(COMMIT_next, next, locinput);
8138 NOT_REACHED; /* NOTREACHED */
8140 case COMMIT_next_fail:
8144 NOT_REACHED; /* NOTREACHED */
8146 case OPFAIL: /* (*FAIL) */
8148 sv_commit = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
8150 /* deal with (?(?!)X|Y) properly,
8151 * make sure we trigger the no branch
8152 * of the trailing IFTHEN structure*/
8158 NOT_REACHED; /* NOTREACHED */
8160 #define ST st->u.mark
8161 case MARKPOINT: /* (*MARK:foo) */
8162 ST.prev_mark = mark_state;
8163 ST.mark_name = sv_commit = sv_yes_mark
8164 = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
8166 ST.mark_loc = locinput;
8167 PUSH_YES_STATE_GOTO(MARKPOINT_next, next, locinput);
8168 NOT_REACHED; /* NOTREACHED */
8170 case MARKPOINT_next:
8171 mark_state = ST.prev_mark;
8173 NOT_REACHED; /* NOTREACHED */
8175 case MARKPOINT_next_fail:
8176 if (popmark && sv_eq(ST.mark_name,popmark))
8178 if (ST.mark_loc > startpoint)
8179 reginfo->cutpoint = HOPBACKc(ST.mark_loc, 1);
8180 popmark = NULL; /* we found our mark */
8181 sv_commit = ST.mark_name;
8184 Perl_re_exec_indentf( aTHX_ "%ssetting cutpoint to mark:%"SVf"...%s\n",
8186 PL_colors[4], SVfARG(sv_commit), PL_colors[5]);
8189 mark_state = ST.prev_mark;
8190 sv_yes_mark = mark_state ?
8191 mark_state->u.mark.mark_name : NULL;
8193 NOT_REACHED; /* NOTREACHED */
8195 case SKIP: /* (*SKIP) */
8197 /* (*SKIP) : if we fail we cut here*/
8198 ST.mark_name = NULL;
8199 ST.mark_loc = locinput;
8200 PUSH_STATE_GOTO(SKIP_next,next, locinput);
8202 /* (*SKIP:NAME) : if there is a (*MARK:NAME) fail where it was,
8203 otherwise do nothing. Meaning we need to scan
8205 regmatch_state *cur = mark_state;
8206 SV *find = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
8209 if ( sv_eq( cur->u.mark.mark_name,
8212 ST.mark_name = find;
8213 PUSH_STATE_GOTO( SKIP_next, next, locinput);
8215 cur = cur->u.mark.prev_mark;
8218 /* Didn't find our (*MARK:NAME) so ignore this (*SKIP:NAME) */
8221 case SKIP_next_fail:
8223 /* (*CUT:NAME) - Set up to search for the name as we
8224 collapse the stack*/
8225 popmark = ST.mark_name;
8227 /* (*CUT) - No name, we cut here.*/
8228 if (ST.mark_loc > startpoint)
8229 reginfo->cutpoint = HOPBACKc(ST.mark_loc, 1);
8230 /* but we set sv_commit to latest mark_name if there
8231 is one so they can test to see how things lead to this
8234 sv_commit=mark_state->u.mark.mark_name;
8238 NOT_REACHED; /* NOTREACHED */
8241 case LNBREAK: /* \R */
8242 if ((n=is_LNBREAK_safe(locinput, reginfo->strend, utf8_target))) {
8249 PerlIO_printf(Perl_error_log, "%"UVxf" %d\n",
8250 PTR2UV(scan), OP(scan));
8251 Perl_croak(aTHX_ "regexp memory corruption");
8253 /* this is a point to jump to in order to increment
8254 * locinput by one character */
8256 assert(!NEXTCHR_IS_EOS);
8258 locinput += PL_utf8skip[nextchr];
8259 /* locinput is allowed to go 1 char off the end, but not 2+ */
8260 if (locinput > reginfo->strend)
8269 /* switch break jumps here */
8270 scan = next; /* prepare to execute the next op and ... */
8271 continue; /* ... jump back to the top, reusing st */
8275 /* push a state that backtracks on success */
8276 st->u.yes.prev_yes_state = yes_state;
8280 /* push a new regex state, then continue at scan */
8282 regmatch_state *newst;
8285 regmatch_state *cur = st;
8286 regmatch_state *curyes = yes_state;
8288 regmatch_slab *slab = PL_regmatch_slab;
8289 for (;curd > -1 && (depth-curd < 3);cur--,curd--) {
8290 if (cur < SLAB_FIRST(slab)) {
8292 cur = SLAB_LAST(slab);
8294 Perl_re_exec_indentf( aTHX_ "#%-3d %-10s %s\n",
8296 curd, PL_reg_name[cur->resume_state],
8297 (curyes == cur) ? "yes" : ""
8300 curyes = cur->u.yes.prev_yes_state;
8303 DEBUG_STATE_pp("push")
8306 st->locinput = locinput;
8308 if (newst > SLAB_LAST(PL_regmatch_slab))
8309 newst = S_push_slab(aTHX);
8310 PL_regmatch_state = newst;
8312 locinput = pushinput;
8320 * We get here only if there's trouble -- normally "case END" is
8321 * the terminating point.
8323 Perl_croak(aTHX_ "corrupted regexp pointers");
8324 NOT_REACHED; /* NOTREACHED */
8328 /* we have successfully completed a subexpression, but we must now
8329 * pop to the state marked by yes_state and continue from there */
8330 assert(st != yes_state);
8332 while (st != yes_state) {
8334 if (st < SLAB_FIRST(PL_regmatch_slab)) {
8335 PL_regmatch_slab = PL_regmatch_slab->prev;
8336 st = SLAB_LAST(PL_regmatch_slab);
8340 DEBUG_STATE_pp("pop (no final)");
8342 DEBUG_STATE_pp("pop (yes)");
8348 while (yes_state < SLAB_FIRST(PL_regmatch_slab)
8349 || yes_state > SLAB_LAST(PL_regmatch_slab))
8351 /* not in this slab, pop slab */
8352 depth -= (st - SLAB_FIRST(PL_regmatch_slab) + 1);
8353 PL_regmatch_slab = PL_regmatch_slab->prev;
8354 st = SLAB_LAST(PL_regmatch_slab);
8356 depth -= (st - yes_state);
8359 yes_state = st->u.yes.prev_yes_state;
8360 PL_regmatch_state = st;
8363 locinput= st->locinput;
8364 state_num = st->resume_state + no_final;
8365 goto reenter_switch;
8368 DEBUG_EXECUTE_r(Perl_re_printf( aTHX_ "%sMatch successful!%s\n",
8369 PL_colors[4], PL_colors[5]));
8371 if (reginfo->info_aux_eval) {
8372 /* each successfully executed (?{...}) block does the equivalent of
8373 * local $^R = do {...}
8374 * When popping the save stack, all these locals would be undone;
8375 * bypass this by setting the outermost saved $^R to the latest
8377 /* I dont know if this is needed or works properly now.
8378 * see code related to PL_replgv elsewhere in this file.
8381 if (oreplsv != GvSV(PL_replgv))
8382 sv_setsv(oreplsv, GvSV(PL_replgv));
8389 Perl_re_exec_indentf( aTHX_ "%sfailed...%s\n",
8391 PL_colors[4], PL_colors[5])
8403 /* there's a previous state to backtrack to */
8405 if (st < SLAB_FIRST(PL_regmatch_slab)) {
8406 PL_regmatch_slab = PL_regmatch_slab->prev;
8407 st = SLAB_LAST(PL_regmatch_slab);
8409 PL_regmatch_state = st;
8410 locinput= st->locinput;
8412 DEBUG_STATE_pp("pop");
8414 if (yes_state == st)
8415 yes_state = st->u.yes.prev_yes_state;
8417 state_num = st->resume_state + 1; /* failure = success + 1 */
8418 goto reenter_switch;
8423 if (rex->intflags & PREGf_VERBARG_SEEN) {
8424 SV *sv_err = get_sv("REGERROR", 1);
8425 SV *sv_mrk = get_sv("REGMARK", 1);
8427 sv_commit = &PL_sv_no;
8429 sv_yes_mark = &PL_sv_yes;
8432 sv_commit = &PL_sv_yes;
8433 sv_yes_mark = &PL_sv_no;
8437 sv_setsv(sv_err, sv_commit);
8438 sv_setsv(sv_mrk, sv_yes_mark);
8442 if (last_pushed_cv) {
8445 PERL_UNUSED_VAR(SP);
8448 assert(!result || locinput - reginfo->strbeg >= 0);
8449 return result ? locinput - reginfo->strbeg : -1;
8453 - regrepeat - repeatedly match something simple, report how many
8455 * What 'simple' means is a node which can be the operand of a quantifier like
8458 * startposp - pointer a pointer to the start position. This is updated
8459 * to point to the byte following the highest successful
8461 * p - the regnode to be repeatedly matched against.
8462 * reginfo - struct holding match state, such as strend
8463 * max - maximum number of things to match.
8464 * depth - (for debugging) backtracking depth.
8467 S_regrepeat(pTHX_ regexp *prog, char **startposp, const regnode *p,
8468 regmatch_info *const reginfo, I32 max, int depth)
8470 char *scan; /* Pointer to current position in target string */
8472 char *loceol = reginfo->strend; /* local version */
8473 I32 hardcount = 0; /* How many matches so far */
8474 bool utf8_target = reginfo->is_utf8_target;
8475 unsigned int to_complement = 0; /* Invert the result? */
8477 _char_class_number classnum;
8479 PERL_UNUSED_ARG(depth);
8482 PERL_ARGS_ASSERT_REGREPEAT;
8485 if (max == REG_INFTY)
8487 else if (! utf8_target && loceol - scan > max)
8488 loceol = scan + max;
8490 /* Here, for the case of a non-UTF-8 target we have adjusted <loceol> down
8491 * to the maximum of how far we should go in it (leaving it set to the real
8492 * end, if the maximum permissible would take us beyond that). This allows
8493 * us to make the loop exit condition that we haven't gone past <loceol> to
8494 * also mean that we haven't exceeded the max permissible count, saving a
8495 * test each time through the loop. But it assumes that the OP matches a
8496 * single byte, which is true for most of the OPs below when applied to a
8497 * non-UTF-8 target. Those relatively few OPs that don't have this
8498 * characteristic will have to compensate.
8500 * There is no adjustment for UTF-8 targets, as the number of bytes per
8501 * character varies. OPs will have to test both that the count is less
8502 * than the max permissible (using <hardcount> to keep track), and that we
8503 * are still within the bounds of the string (using <loceol>. A few OPs
8504 * match a single byte no matter what the encoding. They can omit the max
8505 * test if, for the UTF-8 case, they do the adjustment that was skipped
8508 * Thus, the code above sets things up for the common case; and exceptional
8509 * cases need extra work; the common case is to make sure <scan> doesn't
8510 * go past <loceol>, and for UTF-8 to also use <hardcount> to make sure the
8511 * count doesn't exceed the maximum permissible */
8516 while (scan < loceol && hardcount < max && *scan != '\n') {
8517 scan += UTF8SKIP(scan);
8521 while (scan < loceol && *scan != '\n')
8527 while (scan < loceol && hardcount < max) {
8528 scan += UTF8SKIP(scan);
8536 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
8537 if (utf8_target && UTF8_IS_ABOVE_LATIN1(*scan)) {
8538 _CHECK_AND_OUTPUT_WIDE_LOCALE_UTF8_MSG(scan, loceol);
8542 assert(STR_LEN(p) == reginfo->is_utf8_pat ? UTF8SKIP(STRING(p)) : 1);
8546 /* Can use a simple loop if the pattern char to match on is invariant
8547 * under UTF-8, or both target and pattern aren't UTF-8. Note that we
8548 * can use UTF8_IS_INVARIANT() even if the pattern isn't UTF-8, as it's
8549 * true iff it doesn't matter if the argument is in UTF-8 or not */
8550 if (UTF8_IS_INVARIANT(c) || (! utf8_target && ! reginfo->is_utf8_pat)) {
8551 if (utf8_target && loceol - scan > max) {
8552 /* We didn't adjust <loceol> because is UTF-8, but ok to do so,
8553 * since here, to match at all, 1 char == 1 byte */
8554 loceol = scan + max;
8556 while (scan < loceol && UCHARAT(scan) == c) {
8560 else if (reginfo->is_utf8_pat) {
8562 STRLEN scan_char_len;
8564 /* When both target and pattern are UTF-8, we have to do
8566 while (hardcount < max
8568 && (scan_char_len = UTF8SKIP(scan)) <= STR_LEN(p)
8569 && memEQ(scan, STRING(p), scan_char_len))
8571 scan += scan_char_len;
8575 else if (! UTF8_IS_ABOVE_LATIN1(c)) {
8577 /* Target isn't utf8; convert the character in the UTF-8
8578 * pattern to non-UTF8, and do a simple loop */
8579 c = EIGHT_BIT_UTF8_TO_NATIVE(c, *(STRING(p) + 1));
8580 while (scan < loceol && UCHARAT(scan) == c) {
8583 } /* else pattern char is above Latin1, can't possibly match the
8588 /* Here, the string must be utf8; pattern isn't, and <c> is
8589 * different in utf8 than not, so can't compare them directly.
8590 * Outside the loop, find the two utf8 bytes that represent c, and
8591 * then look for those in sequence in the utf8 string */
8592 U8 high = UTF8_TWO_BYTE_HI(c);
8593 U8 low = UTF8_TWO_BYTE_LO(c);
8595 while (hardcount < max
8596 && scan + 1 < loceol
8597 && UCHARAT(scan) == high
8598 && UCHARAT(scan + 1) == low)
8606 case EXACTFA_NO_TRIE: /* This node only generated for non-utf8 patterns */
8607 assert(! reginfo->is_utf8_pat);
8610 utf8_flags = FOLDEQ_UTF8_NOMIX_ASCII;
8614 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
8615 utf8_flags = FOLDEQ_LOCALE;
8618 case EXACTF: /* This node only generated for non-utf8 patterns */
8619 assert(! reginfo->is_utf8_pat);
8624 if (! utf8_target) {
8627 utf8_flags = FOLDEQ_LOCALE | FOLDEQ_S2_ALREADY_FOLDED
8628 | FOLDEQ_S2_FOLDS_SANE;
8633 utf8_flags = reginfo->is_utf8_pat ? FOLDEQ_S2_ALREADY_FOLDED : 0;
8637 U8 c1_utf8[UTF8_MAXBYTES+1], c2_utf8[UTF8_MAXBYTES+1];
8639 assert(STR_LEN(p) == reginfo->is_utf8_pat ? UTF8SKIP(STRING(p)) : 1);
8641 if (S_setup_EXACTISH_ST_c1_c2(aTHX_ p, &c1, c1_utf8, &c2, c2_utf8,
8644 if (c1 == CHRTEST_VOID) {
8645 /* Use full Unicode fold matching */
8646 char *tmpeol = reginfo->strend;
8647 STRLEN pat_len = reginfo->is_utf8_pat ? UTF8SKIP(STRING(p)) : 1;
8648 while (hardcount < max
8649 && foldEQ_utf8_flags(scan, &tmpeol, 0, utf8_target,
8650 STRING(p), NULL, pat_len,
8651 reginfo->is_utf8_pat, utf8_flags))
8654 tmpeol = reginfo->strend;
8658 else if (utf8_target) {
8660 while (scan < loceol
8662 && memEQ(scan, c1_utf8, UTF8SKIP(scan)))
8664 scan += UTF8SKIP(scan);
8669 while (scan < loceol
8671 && (memEQ(scan, c1_utf8, UTF8SKIP(scan))
8672 || memEQ(scan, c2_utf8, UTF8SKIP(scan))))
8674 scan += UTF8SKIP(scan);
8679 else if (c1 == c2) {
8680 while (scan < loceol && UCHARAT(scan) == c1) {
8685 while (scan < loceol &&
8686 (UCHARAT(scan) == c1 || UCHARAT(scan) == c2))
8695 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
8697 if (ANYOFL_UTF8_LOCALE_REQD(FLAGS(p)) && ! IN_UTF8_CTYPE_LOCALE) {
8698 Perl_ck_warner(aTHX_ packWARN(WARN_LOCALE), utf8_locale_required);
8704 while (hardcount < max
8706 && reginclass(prog, p, (U8*)scan, (U8*) loceol, utf8_target))
8708 scan += UTF8SKIP(scan);
8712 while (scan < loceol && REGINCLASS(prog, p, (U8*)scan, 0))
8717 /* The argument (FLAGS) to all the POSIX node types is the class number */
8724 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
8725 if (! utf8_target) {
8726 while (scan < loceol && to_complement ^ cBOOL(isFOO_lc(FLAGS(p),
8732 while (hardcount < max && scan < loceol
8733 && to_complement ^ cBOOL(isFOO_utf8_lc(FLAGS(p),
8736 scan += UTF8SKIP(scan);
8749 if (utf8_target && loceol - scan > max) {
8751 /* We didn't adjust <loceol> at the beginning of this routine
8752 * because is UTF-8, but it is actually ok to do so, since here, to
8753 * match, 1 char == 1 byte. */
8754 loceol = scan + max;
8756 while (scan < loceol && _generic_isCC_A((U8) *scan, FLAGS(p))) {
8769 if (! utf8_target) {
8770 while (scan < loceol && ! _generic_isCC_A((U8) *scan, FLAGS(p))) {
8776 /* The complement of something that matches only ASCII matches all
8777 * non-ASCII, plus everything in ASCII that isn't in the class. */
8778 while (hardcount < max && scan < loceol
8779 && (! isASCII_utf8(scan)
8780 || ! _generic_isCC_A((U8) *scan, FLAGS(p))))
8782 scan += UTF8SKIP(scan);
8793 if (! utf8_target) {
8794 while (scan < loceol && to_complement
8795 ^ cBOOL(_generic_isCC((U8) *scan, FLAGS(p))))
8802 classnum = (_char_class_number) FLAGS(p);
8803 if (classnum < _FIRST_NON_SWASH_CC) {
8805 /* Here, a swash is needed for above-Latin1 code points.
8806 * Process as many Latin1 code points using the built-in rules.
8807 * Go to another loop to finish processing upon encountering
8808 * the first Latin1 code point. We could do that in this loop
8809 * as well, but the other way saves having to test if the swash
8810 * has been loaded every time through the loop: extra space to
8812 while (hardcount < max && scan < loceol) {
8813 if (UTF8_IS_INVARIANT(*scan)) {
8814 if (! (to_complement ^ cBOOL(_generic_isCC((U8) *scan,
8821 else if (UTF8_IS_DOWNGRADEABLE_START(*scan)) {
8822 if (! (to_complement
8823 ^ cBOOL(_generic_isCC(EIGHT_BIT_UTF8_TO_NATIVE(*scan,
8832 goto found_above_latin1;
8839 /* For these character classes, the knowledge of how to handle
8840 * every code point is compiled in to Perl via a macro. This
8841 * code is written for making the loops as tight as possible.
8842 * It could be refactored to save space instead */
8844 case _CC_ENUM_SPACE:
8845 while (hardcount < max
8847 && (to_complement ^ cBOOL(isSPACE_utf8(scan))))
8849 scan += UTF8SKIP(scan);
8853 case _CC_ENUM_BLANK:
8854 while (hardcount < max
8856 && (to_complement ^ cBOOL(isBLANK_utf8(scan))))
8858 scan += UTF8SKIP(scan);
8862 case _CC_ENUM_XDIGIT:
8863 while (hardcount < max
8865 && (to_complement ^ cBOOL(isXDIGIT_utf8(scan))))
8867 scan += UTF8SKIP(scan);
8871 case _CC_ENUM_VERTSPACE:
8872 while (hardcount < max
8874 && (to_complement ^ cBOOL(isVERTWS_utf8(scan))))
8876 scan += UTF8SKIP(scan);
8880 case _CC_ENUM_CNTRL:
8881 while (hardcount < max
8883 && (to_complement ^ cBOOL(isCNTRL_utf8(scan))))
8885 scan += UTF8SKIP(scan);
8890 Perl_croak(aTHX_ "panic: regrepeat() node %d='%s' has an unexpected character class '%d'", OP(p), PL_reg_name[OP(p)], classnum);
8896 found_above_latin1: /* Continuation of POSIXU and NPOSIXU */
8898 /* Load the swash if not already present */
8899 if (! PL_utf8_swash_ptrs[classnum]) {
8900 U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
8901 PL_utf8_swash_ptrs[classnum] = _core_swash_init(
8905 PL_XPosix_ptrs[classnum], &flags);
8908 while (hardcount < max && scan < loceol
8909 && to_complement ^ cBOOL(_generic_utf8(
8912 swash_fetch(PL_utf8_swash_ptrs[classnum],
8916 scan += UTF8SKIP(scan);
8923 while (hardcount < max && scan < loceol &&
8924 (c=is_LNBREAK_utf8_safe(scan, loceol))) {
8929 /* LNBREAK can match one or two latin chars, which is ok, but we
8930 * have to use hardcount in this situation, and throw away the
8931 * adjustment to <loceol> done before the switch statement */
8932 loceol = reginfo->strend;
8933 while (scan < loceol && (c=is_LNBREAK_latin1_safe(scan, loceol))) {
8942 _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
8956 /* These are all 0 width, so match right here or not at all. */
8960 Perl_croak(aTHX_ "panic: regrepeat() called with unrecognized node type %d='%s'", OP(p), PL_reg_name[OP(p)]);
8961 NOT_REACHED; /* NOTREACHED */
8968 c = scan - *startposp;
8972 GET_RE_DEBUG_FLAGS_DECL;
8974 SV * const prop = sv_newmortal();
8975 regprop(prog, prop, p, reginfo, NULL);
8976 Perl_re_exec_indentf( aTHX_ "%s can match %"IVdf" times out of %"IVdf"...\n",
8977 depth, SvPVX_const(prop),(IV)c,(IV)max);
8985 #if !defined(PERL_IN_XSUB_RE) || defined(PLUGGABLE_RE_EXTENSION)
8987 - regclass_swash - prepare the utf8 swash. Wraps the shared core version to
8988 create a copy so that changes the caller makes won't change the shared one.
8989 If <altsvp> is non-null, will return NULL in it, for back-compat.
8992 Perl_regclass_swash(pTHX_ const regexp *prog, const regnode* node, bool doinit, SV** listsvp, SV **altsvp)
8994 PERL_ARGS_ASSERT_REGCLASS_SWASH;
9000 return newSVsv(_get_regclass_nonbitmap_data(prog, node, doinit, listsvp, NULL, NULL));
9003 #endif /* !defined(PERL_IN_XSUB_RE) || defined(PLUGGABLE_RE_EXTENSION) */
9006 - reginclass - determine if a character falls into a character class
9008 n is the ANYOF-type regnode
9009 p is the target string
9010 p_end points to one byte beyond the end of the target string
9011 utf8_target tells whether p is in UTF-8.
9013 Returns true if matched; false otherwise.
9015 Note that this can be a synthetic start class, a combination of various
9016 nodes, so things you think might be mutually exclusive, such as locale,
9017 aren't. It can match both locale and non-locale
9022 S_reginclass(pTHX_ regexp * const prog, const regnode * const n, const U8* const p, const U8* const p_end, const bool utf8_target)
9025 const char flags = ANYOF_FLAGS(n);
9029 PERL_ARGS_ASSERT_REGINCLASS;
9031 /* If c is not already the code point, get it. Note that
9032 * UTF8_IS_INVARIANT() works even if not in UTF-8 */
9033 if (! UTF8_IS_INVARIANT(c) && utf8_target) {
9035 c = utf8n_to_uvchr(p, p_end - p, &c_len,
9036 (UTF8_ALLOW_DEFAULT & UTF8_ALLOW_ANYUV)
9037 | UTF8_ALLOW_FFFF | UTF8_CHECK_ONLY);
9038 /* see [perl #37836] for UTF8_ALLOW_ANYUV; [perl #38293] for
9039 * UTF8_ALLOW_FFFF */
9040 if (c_len == (STRLEN)-1)
9041 Perl_croak(aTHX_ "Malformed UTF-8 character (fatal)");
9042 if (c > 255 && OP(n) == ANYOFL && ! ANYOFL_UTF8_LOCALE_REQD(flags)) {
9043 _CHECK_AND_OUTPUT_WIDE_LOCALE_CP_MSG(c);
9047 /* If this character is potentially in the bitmap, check it */
9048 if (c < NUM_ANYOF_CODE_POINTS) {
9049 if (ANYOF_BITMAP_TEST(n, c))
9052 & ANYOF_SHARED_d_MATCHES_ALL_NON_UTF8_NON_ASCII_non_d_WARN_SUPER)
9059 else if (flags & ANYOF_LOCALE_FLAGS) {
9060 if ((flags & ANYOFL_FOLD)
9062 && ANYOF_BITMAP_TEST(n, PL_fold_locale[c]))
9066 else if (ANYOF_POSIXL_TEST_ANY_SET(n)
9070 /* The data structure is arranged so bits 0, 2, 4, ... are set
9071 * if the class includes the Posix character class given by
9072 * bit/2; and 1, 3, 5, ... are set if the class includes the
9073 * complemented Posix class given by int(bit/2). So we loop
9074 * through the bits, each time changing whether we complement
9075 * the result or not. Suppose for the sake of illustration
9076 * that bits 0-3 mean respectively, \w, \W, \s, \S. If bit 0
9077 * is set, it means there is a match for this ANYOF node if the
9078 * character is in the class given by the expression (0 / 2 = 0
9079 * = \w). If it is in that class, isFOO_lc() will return 1,
9080 * and since 'to_complement' is 0, the result will stay TRUE,
9081 * and we exit the loop. Suppose instead that bit 0 is 0, but
9082 * bit 1 is 1. That means there is a match if the character
9083 * matches \W. We won't bother to call isFOO_lc() on bit 0,
9084 * but will on bit 1. On the second iteration 'to_complement'
9085 * will be 1, so the exclusive or will reverse things, so we
9086 * are testing for \W. On the third iteration, 'to_complement'
9087 * will be 0, and we would be testing for \s; the fourth
9088 * iteration would test for \S, etc.
9090 * Note that this code assumes that all the classes are closed
9091 * under folding. For example, if a character matches \w, then
9092 * its fold does too; and vice versa. This should be true for
9093 * any well-behaved locale for all the currently defined Posix
9094 * classes, except for :lower: and :upper:, which are handled
9095 * by the pseudo-class :cased: which matches if either of the
9096 * other two does. To get rid of this assumption, an outer
9097 * loop could be used below to iterate over both the source
9098 * character, and its fold (if different) */
9101 int to_complement = 0;
9103 while (count < ANYOF_MAX) {
9104 if (ANYOF_POSIXL_TEST(n, count)
9105 && to_complement ^ cBOOL(isFOO_lc(count/2, (U8) c)))
9118 /* If the bitmap didn't (or couldn't) match, and something outside the
9119 * bitmap could match, try that. */
9121 if (c >= NUM_ANYOF_CODE_POINTS
9122 && (flags & ANYOF_MATCHES_ALL_ABOVE_BITMAP))
9124 match = TRUE; /* Everything above the bitmap matches */
9126 /* Here doesn't match everything above the bitmap. If there is
9127 * some information available beyond the bitmap, we may find a
9128 * match in it. If so, this is most likely because the code point
9129 * is outside the bitmap range. But rarely, it could be because of
9130 * some other reason. If so, various flags are set to indicate
9131 * this possibility. On ANYOFD nodes, there may be matches that
9132 * happen only when the target string is UTF-8; or for other node
9133 * types, because runtime lookup is needed, regardless of the
9134 * UTF-8ness of the target string. Finally, under /il, there may
9135 * be some matches only possible if the locale is a UTF-8 one. */
9136 else if ( ARG(n) != ANYOF_ONLY_HAS_BITMAP
9137 && ( c >= NUM_ANYOF_CODE_POINTS
9138 || ( (flags & ANYOF_SHARED_d_UPPER_LATIN1_UTF8_STRING_MATCHES_non_d_RUNTIME_USER_PROP)
9139 && ( UNLIKELY(OP(n) != ANYOFD)
9140 || (utf8_target && ! isASCII_uni(c)
9141 # if NUM_ANYOF_CODE_POINTS > 256
9145 || ( ANYOFL_SOME_FOLDS_ONLY_IN_UTF8_LOCALE(flags)
9146 && IN_UTF8_CTYPE_LOCALE)))
9148 SV* only_utf8_locale = NULL;
9149 SV * const sw = _get_regclass_nonbitmap_data(prog, n, TRUE, 0,
9150 &only_utf8_locale, NULL);
9156 } else { /* Convert to utf8 */
9157 utf8_p = utf8_buffer;
9158 append_utf8_from_native_byte(*p, &utf8_p);
9159 utf8_p = utf8_buffer;
9162 if (swash_fetch(sw, utf8_p, TRUE)) {
9166 if (! match && only_utf8_locale && IN_UTF8_CTYPE_LOCALE) {
9167 match = _invlist_contains_cp(only_utf8_locale, c);
9171 if (UNICODE_IS_SUPER(c)
9173 & ANYOF_SHARED_d_MATCHES_ALL_NON_UTF8_NON_ASCII_non_d_WARN_SUPER)
9175 && ckWARN_d(WARN_NON_UNICODE))
9177 Perl_warner(aTHX_ packWARN(WARN_NON_UNICODE),
9178 "Matched non-Unicode code point 0x%04"UVXf" against Unicode property; may not be portable", c);
9182 #if ANYOF_INVERT != 1
9183 /* Depending on compiler optimization cBOOL takes time, so if don't have to
9185 # error ANYOF_INVERT needs to be set to 1, or guarded with cBOOL below,
9188 /* The xor complements the return if to invert: 1^1 = 0, 1^0 = 1 */
9189 return (flags & ANYOF_INVERT) ^ match;
9193 S_reghop3(U8 *s, SSize_t off, const U8* lim)
9195 /* return the position 'off' UTF-8 characters away from 's', forward if
9196 * 'off' >= 0, backwards if negative. But don't go outside of position
9197 * 'lim', which better be < s if off < 0 */
9199 PERL_ARGS_ASSERT_REGHOP3;
9202 while (off-- && s < lim) {
9203 /* XXX could check well-formedness here */
9208 while (off++ && s > lim) {
9210 if (UTF8_IS_CONTINUED(*s)) {
9211 while (s > lim && UTF8_IS_CONTINUATION(*s))
9213 if (! UTF8_IS_START(*s)) {
9214 Perl_croak_nocontext("Malformed UTF-8 character (fatal)");
9217 /* XXX could check well-formedness here */
9224 S_reghop4(U8 *s, SSize_t off, const U8* llim, const U8* rlim)
9226 PERL_ARGS_ASSERT_REGHOP4;
9229 while (off-- && s < rlim) {
9230 /* XXX could check well-formedness here */
9235 while (off++ && s > llim) {
9237 if (UTF8_IS_CONTINUED(*s)) {
9238 while (s > llim && UTF8_IS_CONTINUATION(*s))
9240 if (! UTF8_IS_START(*s)) {
9241 Perl_croak_nocontext("Malformed UTF-8 character (fatal)");
9244 /* XXX could check well-formedness here */
9250 /* like reghop3, but returns NULL on overrun, rather than returning last
9254 S_reghopmaybe3(U8* s, SSize_t off, const U8* lim)
9256 PERL_ARGS_ASSERT_REGHOPMAYBE3;
9259 while (off-- && s < lim) {
9260 /* XXX could check well-formedness here */
9267 while (off++ && s > lim) {
9269 if (UTF8_IS_CONTINUED(*s)) {
9270 while (s > lim && UTF8_IS_CONTINUATION(*s))
9272 if (! UTF8_IS_START(*s)) {
9273 Perl_croak_nocontext("Malformed UTF-8 character (fatal)");
9276 /* XXX could check well-formedness here */
9285 /* when executing a regex that may have (?{}), extra stuff needs setting
9286 up that will be visible to the called code, even before the current
9287 match has finished. In particular:
9289 * $_ is localised to the SV currently being matched;
9290 * pos($_) is created if necessary, ready to be updated on each call-out
9292 * a fake PMOP is created that can be set to PL_curpm (normally PL_curpm
9293 isn't set until the current pattern is successfully finished), so that
9294 $1 etc of the match-so-far can be seen;
9295 * save the old values of subbeg etc of the current regex, and set then
9296 to the current string (again, this is normally only done at the end
9301 S_setup_eval_state(pTHX_ regmatch_info *const reginfo)
9304 regexp *const rex = ReANY(reginfo->prog);
9305 regmatch_info_aux_eval *eval_state = reginfo->info_aux_eval;
9307 eval_state->rex = rex;
9310 /* Make $_ available to executed code. */
9311 if (reginfo->sv != DEFSV) {
9313 DEFSV_set(reginfo->sv);
9316 if (!(mg = mg_find_mglob(reginfo->sv))) {
9317 /* prepare for quick setting of pos */
9318 mg = sv_magicext_mglob(reginfo->sv);
9321 eval_state->pos_magic = mg;
9322 eval_state->pos = mg->mg_len;
9323 eval_state->pos_flags = mg->mg_flags;
9326 eval_state->pos_magic = NULL;
9328 if (!PL_reg_curpm) {
9329 /* PL_reg_curpm is a fake PMOP that we can attach the current
9330 * regex to and point PL_curpm at, so that $1 et al are visible
9331 * within a /(?{})/. It's just allocated once per interpreter the
9332 * first time its needed */
9333 Newxz(PL_reg_curpm, 1, PMOP);
9336 SV* const repointer = &PL_sv_undef;
9337 /* this regexp is also owned by the new PL_reg_curpm, which
9338 will try to free it. */
9339 av_push(PL_regex_padav, repointer);
9340 PL_reg_curpm->op_pmoffset = av_tindex(PL_regex_padav);
9341 PL_regex_pad = AvARRAY(PL_regex_padav);
9345 SET_reg_curpm(reginfo->prog);
9346 eval_state->curpm = PL_curpm;
9347 PL_curpm = PL_reg_curpm;
9348 if (RXp_MATCH_COPIED(rex)) {
9349 /* Here is a serious problem: we cannot rewrite subbeg,
9350 since it may be needed if this match fails. Thus
9351 $` inside (?{}) could fail... */
9352 eval_state->subbeg = rex->subbeg;
9353 eval_state->sublen = rex->sublen;
9354 eval_state->suboffset = rex->suboffset;
9355 eval_state->subcoffset = rex->subcoffset;
9357 eval_state->saved_copy = rex->saved_copy;
9359 RXp_MATCH_COPIED_off(rex);
9362 eval_state->subbeg = NULL;
9363 rex->subbeg = (char *)reginfo->strbeg;
9365 rex->subcoffset = 0;
9366 rex->sublen = reginfo->strend - reginfo->strbeg;
9370 /* destructor to clear up regmatch_info_aux and regmatch_info_aux_eval */
9373 S_cleanup_regmatch_info_aux(pTHX_ void *arg)
9375 regmatch_info_aux *aux = (regmatch_info_aux *) arg;
9376 regmatch_info_aux_eval *eval_state = aux->info_aux_eval;
9379 Safefree(aux->poscache);
9383 /* undo the effects of S_setup_eval_state() */
9385 if (eval_state->subbeg) {
9386 regexp * const rex = eval_state->rex;
9387 rex->subbeg = eval_state->subbeg;
9388 rex->sublen = eval_state->sublen;
9389 rex->suboffset = eval_state->suboffset;
9390 rex->subcoffset = eval_state->subcoffset;
9392 rex->saved_copy = eval_state->saved_copy;
9394 RXp_MATCH_COPIED_on(rex);
9396 if (eval_state->pos_magic)
9398 eval_state->pos_magic->mg_len = eval_state->pos;
9399 eval_state->pos_magic->mg_flags =
9400 (eval_state->pos_magic->mg_flags & ~MGf_BYTES)
9401 | (eval_state->pos_flags & MGf_BYTES);
9404 PL_curpm = eval_state->curpm;
9407 PL_regmatch_state = aux->old_regmatch_state;
9408 PL_regmatch_slab = aux->old_regmatch_slab;
9410 /* free all slabs above current one - this must be the last action
9411 * of this function, as aux and eval_state are allocated within
9412 * slabs and may be freed here */
9414 s = PL_regmatch_slab->next;
9416 PL_regmatch_slab->next = NULL;
9418 regmatch_slab * const osl = s;
9427 S_to_utf8_substr(pTHX_ regexp *prog)
9429 /* Converts substr fields in prog from bytes to UTF-8, calling fbm_compile
9430 * on the converted value */
9434 PERL_ARGS_ASSERT_TO_UTF8_SUBSTR;
9437 if (prog->substrs->data[i].substr
9438 && !prog->substrs->data[i].utf8_substr) {
9439 SV* const sv = newSVsv(prog->substrs->data[i].substr);
9440 prog->substrs->data[i].utf8_substr = sv;
9441 sv_utf8_upgrade(sv);
9442 if (SvVALID(prog->substrs->data[i].substr)) {
9443 if (SvTAIL(prog->substrs->data[i].substr)) {
9444 /* Trim the trailing \n that fbm_compile added last
9446 SvCUR_set(sv, SvCUR(sv) - 1);
9447 /* Whilst this makes the SV technically "invalid" (as its
9448 buffer is no longer followed by "\0") when fbm_compile()
9449 adds the "\n" back, a "\0" is restored. */
9450 fbm_compile(sv, FBMcf_TAIL);
9454 if (prog->substrs->data[i].substr == prog->check_substr)
9455 prog->check_utf8 = sv;
9461 S_to_byte_substr(pTHX_ regexp *prog)
9463 /* Converts substr fields in prog from UTF-8 to bytes, calling fbm_compile
9464 * on the converted value; returns FALSE if can't be converted. */
9468 PERL_ARGS_ASSERT_TO_BYTE_SUBSTR;
9471 if (prog->substrs->data[i].utf8_substr
9472 && !prog->substrs->data[i].substr) {
9473 SV* sv = newSVsv(prog->substrs->data[i].utf8_substr);
9474 if (! sv_utf8_downgrade(sv, TRUE)) {
9477 if (SvVALID(prog->substrs->data[i].utf8_substr)) {
9478 if (SvTAIL(prog->substrs->data[i].utf8_substr)) {
9479 /* Trim the trailing \n that fbm_compile added last
9481 SvCUR_set(sv, SvCUR(sv) - 1);
9482 fbm_compile(sv, FBMcf_TAIL);
9486 prog->substrs->data[i].substr = sv;
9487 if (prog->substrs->data[i].utf8_substr == prog->check_utf8)
9488 prog->check_substr = sv;
9496 * ex: set ts=8 sts=4 sw=4 et:
https://perl5.git.perl.org / perl5.git / blob