1 case $PERL_CONFIG_SH in
6 echo "Can't find config.sh."; exit 1
17 # if cross-compilation, the Makefile named accordingly
18 Makefile=Makefile-cross-$CROSS_NAME
19 . Cross/config-${CROSS_NAME}.sh
23 : This forces SH files to create target in same directory as SH file.
24 : This is so that make depend always knows where to find SH derivatives.
26 */*) cd `expr X$0 : 'X\(.*\)/'` ;;
29 linklibperl='$(LIBPERL)'
31 shrpldflags='$(LDDLFLAGS)'
33 DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB'
34 DPERL_IS_MINIPERL='-DPERL_IS_MINIPERL'
37 # Prefix all runs of 'miniperl' and 'perl' with
38 # $ldlibpth so that ./perl finds *this* shared libperl.
39 case "$LD_LIBRARY_PATH" in
41 ldlibpth="LD_LIBRARY_PATH=`pwd`";;
43 ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";;
46 pldlflags="$cccdlflags"
48 case "${osname}${osvers}" in
51 lddlflags="-dynamic -undefined warning -framework System \
52 -compatibility_version 1 -current_version $patchlevel \
53 -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
56 shrpldflags="${ldflags} -dynamiclib \
57 -compatibility_version \
58 ${api_revision}.${api_version}.${api_subversion} \
60 ${revision}.${patchlevel}.${subversion} \
61 -install_name \$(shrpdir)/\$@"
64 shrpldflags="$shrpldflags -Wl,--out-implib=libperl.dll.a -Wl,--image-base,0x52000000"
65 linklibperl="-L. -lperl"
70 netbsd*|freebsd[234]*|openbsd*|dragonfly*)
71 linklibperl="-L. -lperl"
74 linklibperl="-L. -lperl"
75 shrpldflags="$shrpldflags -Wl,--image-base,0x57000000"
80 shrpldflags="-shared -Wl,-H512 -Wl,-T512 -Wl,-bhalt:4 -Wl,-bM:SRE -Wl,-bE:perl.exp"
82 3*) shrpldflags="$shrpldflags -e _nostart"
84 *) shrpldflags="$shrpldflags -Wl,-bnoentry"
87 shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
88 linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl"
89 linklibperl_nonshr='-lperl_nonshr'
92 shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
94 3*) shrpldflags="$shrpldflags -e _nostart"
96 *) shrpldflags="$shrpldflags -b noentry"
99 shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
100 linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl"
101 linklibperl_nonshr='-lperl_nonshr'
106 linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl"
109 shrpldflags='-W l,XPLINK,dll'
110 linklibperl='libperl.x'
111 DPERL_EXTERNAL_GLOB=''
114 case "$ldlibpthname" in
122 eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\""
125 # Strip off any trailing :'s
126 ldlibpth=`echo $ldlibpth | sed 's/:*$//'`
132 *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;;
137 # If there is a pre-existing $libperl from a previous
138 # installation, Linux needs to use LD_PRELOAD to
139 # override the LD_LIBRARY_PATH setting. See the
140 # INSTALL file, under "Building a shared perl library".
141 # If there is no pre-existing $libperl, we don't need
142 # to do anything further.
143 if test -f $archlib/CORE/$libperl; then
145 cat <<'EOT' > preload
149 test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD"
153 ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl"
156 os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth"
163 static_ldflags='CCCDLFLAGS='
167 : is Cwd static or dynamic
169 list_util_dep='$(PERL_EXE)'
170 for f in $dynamic_ext; do
172 Cwd) static_cwd='undef' ;;
173 List/Util) list_util_dep=lib/auto/List/Util/Util.$dlext
177 : Prepare dependency lists for Makefile.
179 dynamic_ext_re="lib/auto/re/re.$dlext"
181 for f in $dynamic_ext; do
182 : the dependency named here will never exist
183 base=`echo "$f" | sed 's/.*\///'`
184 this_target="lib/auto/$f/$base.$dlext"
185 dynamic_list="$dynamic_list $this_target"
187 : Parallel makes reveal that we have some interdependencies
189 Math/BigInt/FastCalc|Devel/NYTProf) extra_dep="$extra_dep
190 $this_target: $list_util_dep" ;;
191 Unicode/Normalize) extra_dep="$extra_dep
192 $this_target: uni.data" ;;
197 for f in $static_ext; do
198 base=`echo "$f" | sed 's/.*\///'`
199 static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
200 : Parallel makes reveal that we have some interdependencies
201 this_target="lib/auto/$f/$base\$(LIB_EXT)"
203 Math/BigInt/FastCalc|Devel/NYTProf) extra_dep="$extra_dep
204 $this_target: lib/auto/List/Util/Util\$(LIB_EXT)" ;;
205 Unicode/Normalize) extra_dep="$extra_dep
206 $this_target: uni.data" ;;
211 for f in $nonxs_ext; do
212 p=`echo "$f" | tr / -`
213 for d in ext dist cpan; do
214 if test -d $d/$p; then
215 nonxs_list="$nonxs_list $d/$p/pm_to_blib"
225 dtrace_h='perldtrace.h'
226 $dtrace -G -s perldtrace.d -o perldtrace.tmp >/dev/null 2>&1 \
227 && rm -f perldtrace.tmp && dtrace_o='perldtrace$(OBJ_EXT)' \
228 && minidtrace_o='miniperldtrace$(OBJ_EXT)'
232 echo "Extracting $Makefile (with variable substitutions)"
233 $spitshell >$Makefile <<!GROK!THIS!
235 # This file is derived from Makefile.SH. Any changes made here will
236 # be lost the next time you run Configure.
237 # Makefile is used to generate $firstmakefile. The only difference
238 # is that $firstmakefile has the dependencies filled in at the end.
246 mallocsrc = $mallocsrc
247 mallocobj = $mallocobj
251 # NOTE: some systems don't grok "cp -f". XXX Configure test needed?
256 # The following are mentioned only to make metaconfig include the
257 # appropriate questions in Configure. If you want to change these,
258 # edit config.sh instead, or specify --man1dir=/wherever on
259 # installman commandline.
261 scriptdir = $scriptdir
262 shrpdir = $archlibexp/CORE
263 privlib = $installprivlib
269 # The following are used to build and install shared libraries for
271 LDDLFLAGS = $lddlflags
272 SHRPLDFLAGS = $shrpldflags
273 CCDLFLAGS = $ccdlflags
275 PLDLFLAGS = $pldlflags
277 LLIBPERL= $linklibperl
278 LLIBPERL_NONSHR= $linklibperl_nonshr
281 # Static targets are ordinarily built without CCCDLFLAGS. However,
282 # if building a shared libperl.so that might later be linked into
283 # another application, then it might be appropriate to also build static
284 # extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC
286 STATIC_LDFLAGS = $static_ldflags
288 # The following is used to include the current directory in
289 # the dynamic loader path you are building a shared libperl.
292 # Sometimes running an executable is an adventure.
295 # These variables may need to be manually set for non-Unix systems.
303 # Macros to invoke a copy of miniperl during the build. Targets which
304 # are built using these macros should depend on \$(MINIPERL_EXE)
305 MINIPERL_EXE = miniperl\$(EXE_EXT)
306 MINIPERL = \$(LDLIBPTH) \$(RUN) ./miniperl\$(EXE_EXT) -Ilib
308 # Macros to invoke a copy of our fully operational perl during the build.
309 PERL_EXE = perl\$(EXE_EXT)
310 RUN_PERL = \$(LDLIBPTH) \$(RUN) ./perl\$(EXE_EXT)
312 # Macros to run our tests
313 RUN_TESTS = \$(LDLIBPTH) ./runtests
315 dynamic_ext = $dynamic_list
316 dynamic_ext_re = $dynamic_ext_re
317 static_ext = $static_list
318 nonxs_ext = $nonxs_list
319 ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext)
320 DYNALOADER = DynaLoader\$(OBJ_EXT)
322 libs = $perllibs $cryptlib
324 public = \$(PERL_EXE) utilities translators
326 shellflags = $shellflags
328 # This is set to MAKE=$make if your $make command doesn't
332 # Mention $gmake here so it gets probed for by Configure.
334 # If you're going to use valgrind and it can't be invoked as plain valgrind
335 # then you'll need to change this, or override it on the make command line.
341 MINIDTRACE_O = $minidtrace_o
343 FIRSTMAKEFILE = $firstmakefile
345 # Any special object files needed by this architecture, e.g. os2/os2.obj
348 .SUFFIXES: .c \$(OBJ_EXT) .i .s
353 # how to tr(anslate) newlines
360 INSTALLPREFIXEXP = $prefix
363 # not used by Makefile but by installperl;
364 # mentioned here so that metaconfig picks these up
368 case "${osname}:${osvers}" in
370 $spitshell >>$Makefile <<EOF
372 # Your locales are broken (osname $osname, osvers $osvers)
373 # and to avoid the numerous
374 # perl: warning: Setting locale failed.
375 # warnings during the build process we reset the locale variables.
386 ## In the following dollars and backticks do not need the extra backslash.
387 $spitshell >>$Makefile <<'!NO!SUBS!'
389 CCCMD = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $@`
391 CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<`
393 CONFIGPM_FROM_CONFIG_SH = lib/Config.pm lib/Config_heavy.pl
394 CONFIGPM = $(CONFIGPM_FROM_CONFIG_SH) lib/Config_git.pl
396 CONFIGPOD = lib/Config.pod
402 # if cross-compilation
403 $spitshell >>$Makefile <<!GROK!THIS!
404 CROSS_NAME = $CROSS_NAME
405 CROSS_LIB = xlib/$CROSS_NAME
407 CCCMD = \`sh \$(shellflags) cflags-cross-$CROSS_NAME "optimize='\$(OPTIMIZE)'" \$@\` -I\$(CROSS_LIB)
408 CCCMDSRC = \`sh \$(shellflags) cflags-cross-$CROSS_NAME "optimize='\$(OPTIMIZE)'" \$<\` -I\$(CROSS_LIB)
409 CONFIGPM = xlib/\$(CROSS_NAME)/Config.pm
410 CONFIGPOD = xlib/\$(CROSS_NAME)/Config.pod
413 xconfig.h: config_h.SH Cross/config-\$(CROSS_NAME).sh
414 CONFIG_SH=Cross/config-\$(CROSS_NAME).sh CONFIG_H=xconfig.h \$(SHELL) config_h.SH
415 #TODO \$(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib -MCross=\$(CROSS_NAME) config_h.PL "INST_VER=\$(INST_VER)" "CORE_DIR=\$(CROSS_LIB)" "CONFIG_H=xconfig.h"
416 cp xconfig.h \$(CROSS_LIB)/
417 cp xconfig.h \$(CROSS_LIB)/config.h
423 ## In the following dollars and backticks do not need the extra backslash.
424 $spitshell >>$Makefile <<'!NO!SUBS!'
426 private = preplibrary $(CONFIGPM) $(CONFIGPOD) lib/ExtUtils/Miniperl.pm git_version.h lib/buildcustomize.pl
428 # Files to be built with variable substitution before miniperl
430 sh = Makefile.SH cflags.SH config_h.SH makedepend.SH myconfig.SH pod/Makefile.SH
432 shextract = Makefile cflags config.h makedepend makedir myconfig pod/Makefile
434 addedbyconf = UU $(shextract) pstruct
436 # Unicode data files generated by mktables
437 unidatafiles = lib/unicore/Decomposition.pl lib/unicore/TestProp.pl \
438 lib/unicore/CombiningClass.pl lib/unicore/Name.pl \
439 lib/unicore/Heavy.pl lib/unicore/mktables.lst
441 # Directories of Unicode data files generated by mktables
442 unidatadirs = lib/unicore/To lib/unicore/lib
444 h1 = EXTERN.h INTERN.h XSUB.h av.h $(CONFIGH) cop.h cv.h dosish.h
445 h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h
446 h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
447 h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
448 h5 = utf8.h warnings.h mydtrace.h op_reg_common.h l1_char_class_tab.h
449 h = $(h1) $(h2) $(h3) $(h4) $(h5)
451 c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c
452 c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
453 c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c
454 c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c
455 c5 = $(madlysrc) $(mallocsrc)
457 c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c opmini.c perlmini.c
459 obj0 = op$(OBJ_EXT) perl$(OBJ_EXT)
460 obj0mini = perlmini$(OBJ_EXT) opmini$(OBJ_EXT) miniperlmain$(OBJ_EXT)
461 obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT) keywords$(OBJ_EXT)
462 obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
463 obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
465 minindt_obj = $(obj0mini) $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
466 mini_obj = $(minindt_obj) $(MINIDTRACE_O)
467 ndt_obj = $(obj0) $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
468 obj = $(ndt_obj) $(DTRACE_O)
470 perltoc_pod_prereqs = extra.pods pod/perl5152delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
471 generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs)
473 Icwd = -Idist/Cwd -Idist/Cwd/lib
481 -errchk=parentheses \
485 -erroff=E_ASSIGN_NARROW_CONV \
486 -erroff=E_BAD_PTR_CAST \
487 -erroff=E_BAD_PTR_CAST_ALIGN \
488 -erroff=E_BAD_PTR_INT_COMBINATION \
489 -erroff=E_BAD_SIGN_EXTEND \
490 -erroff=E_BLOCK_DECL_UNUSED \
491 -erroff=E_CASE_FALLTHRU \
492 -erroff=E_CONST_EXPR \
493 -erroff=E_CONSTANT_CONDITION \
494 -erroff=E_END_OF_LOOP_CODE_NOT_REACHED \
495 -erroff=E_EQUALITY_NOT_ASSIGNMENT \
496 -erroff=E_EXPR_NULL_EFFECT \
497 -erroff=E_FALSE_LOGICAL_EXPR \
498 -erroff=E_INCL_NUSD \
499 -erroff=E_LOOP_EMPTY \
500 -erroff=E_MAIN_PARAM \
501 -erroff=E_POINTER_TO_OBJECT \
502 -erroff=E_PTRDIFF_OVERFLOW \
503 -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \
504 -erroff=E_STATIC_UNUSED \
505 -erroff=E_TRUE_LOGICAL_EXPR
508 -I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \
509 -D__builtin_va_list=va_list \
510 -Dsigjmp_buf=jmp_buf \
534 $(CCCMD) $(PLDLFLAGS) $*.c
537 $(CCCMDSRC) -E $*.c > $*.i
542 all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
544 @echo " Everything is up to date. Type '$(MAKE) test' to run test suite."
546 .PHONY: all translators utilities
548 # Both git_version.h and lib/Config_git.pl are built
549 # by make_patchnum.pl.
550 git_version.h: lib/Config_git.pl
552 lib/Config_git.pl: $(MINIPERL_EXE) make_patchnum.pl
553 $(MINIPERL) make_patchnum.pl
555 # make sure that we recompile perl.c if the git version changes
556 perl$(OBJ_EXT): git_version.h
560 # Making utilities and translators require Cwd. If we have dynamic
561 # loading, we only need miniperl and Cwd.$dlext. If we have static
562 # loading, we need to build perl first.
563 case "$usedl$static_cwd" in
565 util_deps='$(MINIPERL_EXE) $(CONFIGPM) lib/auto/Cwd/Cwd$(DLSUFFIX) FORCE'
566 x2p_deps='$(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) FORCE'
569 util_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
570 x2p_deps='$(PERL_EXE) $(CONFIGPM) $(dynamic_ext) FORCE'
572 *) util_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
573 x2p_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
577 $spitshell >>$Makefile <<!GROK!THIS!
578 translators: $x2p_deps
579 @echo " "; echo " Making x2p stuff"; cd x2p; \$(LDLIBPTH) \$(MAKE) all
582 cd x2p; \$(LDLIBPTH) \$(MAKE) s2p
584 x2p/find2perl: $x2p_deps
585 cd x2p; \$(LDLIBPTH) \$(MAKE) find2perl
587 utilities: $util_deps
588 @echo " "; echo " Making utilities"; cd utils; \$(LDLIBPTH) \$(MAKE) all
592 $spitshell >>$Makefile <<'!NO!SUBS!'
594 # This is now done by installman only if you actually want the man pages.
595 # @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
597 # Phony target to force checking subdirectories.
598 # Apparently some makes require an action for the FORCE target.
604 for file in op perl; do
605 if $issymlink $file.c; then
606 $spitshell >>$Makefile <<!GROK!THIS!
608 # We do a copy of the $file.c instead of a symlink because gcc gets huffy
609 # if we have a symlink forest to another disk (it complains about too many
610 # levels of symbolic links, even if we have only two)
612 ${file}mini.c: $file.c
613 \$(RMS) ${file}mini.c
614 \$(CPS) ${file}.c ${file}mini.c
617 $spitshell >>$Makefile <<!GROK!THIS!
619 ${file}mini.c: $file.c
620 \$(RMS) ${file}mini.c
621 \$(LNS) ${file}.c ${file}mini.c
625 $spitshell >>$Makefile <<!GROK!THIS!
627 ${file}mini\$(OBJ_EXT): ${file}mini.c
628 \$(CCCMD) \$(PLDLFLAGS) $DPERL_IS_MINIPERL $DPERL_EXTERNAL_GLOB ${file}mini.c
632 $spitshell >>$Makefile <<'!NO!SUBS!'
634 globals$(OBJ_EXT): uudmap.h bitcount.h mg_data.h
636 uudmap.h mg_data.h: bitcount.h
638 bitcount.h: generate_uudmap$(HOST_EXE_EXT)
639 $(RUN) ./generate_uudmap$(HOST_EXE_EXT) uudmap.h bitcount.h mg_data.h
641 generate_uudmap$(OBJ_EXT): mg_raw.h
643 generate_uudmap$(HOST_EXE_EXT): generate_uudmap$(OBJ_EXT)
644 $(CC) -o generate_uudmap$(EXE_EXT) $(LDFLAGS) generate_uudmap$(OBJ_EXT) $(libs)
646 miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h
647 $(CCCMD) $(PLDLFLAGS) $*.c
649 perlmain.c: $(MINIPERL_EXE) lib/ExtUtils/Miniperl.pm
650 $(MINIPERL) -Ilib -MExtUtils::Miniperl -e 'writemain(@ARGV)' DynaLoader $(static_ext) > perlmain.c
652 perlmain$(OBJ_EXT): perlmain.c
653 $(CCCMD) $(PLDLFLAGS) $*.c
655 # The file ext.libs is a list of libraries that must be linked in
656 # for static extensions, e.g. -lm -lgdbm, etc. The individual
657 # static extension Makefile's add to it.
658 ext.libs: $(static_ext)
659 -@test -f ext.libs || touch ext.libs
663 # How to build libperl. This is still rather convoluted.
664 # Load up custom Makefile.SH fragment for shared loading and executables:
667 Makefile_s="$osname/Makefile.SHs"
673 $spitshell >>$Makefile <<!GROK!THIS!
675 # In AIX we need to change this for building Perl itself from
676 # its earlier definition (which is for building external
677 # extensions *after* Perl has been built and installed)
678 CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'`
681 case "$useshrplib" in
683 $spitshell >>$Makefile <<'!NO!SUBS!'
685 LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT)
686 MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT)
688 $(LIBPERL_NONSHR): $(obj)
689 $(RMS) $(LIBPERL_NONSHR)
690 $(AR) rcu $(LIBPERL_NONSHR) $(obj)
692 $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
693 $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \
694 opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS)
696 MINIPERLEXP = $(MINIPERL_NONSHR)
698 LIBPERLEXPORT = perl.exp
704 $spitshell >>$Makefile <<'!NO!SUBS!'
705 MINIPERLEXP = $(MINIPERL_EXE)
707 PERLEXPORT = perl.exp
712 $spitshell >>$Makefile <<'!NO!SUBS!'
713 perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH)
714 ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp
719 $spitshell >>$Makefile <<'!NO!SUBS!'
720 MINIPERLEXP = miniperl
722 perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
723 ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def
728 $spitshell >>$Makefile <<'!NO!SUBS!'
729 cygwin.c: cygwin/cygwin.c
730 $(LNS) cygwin/cygwin.c
732 LIBPERL_NONSHR = libperl$(LIB_EXT)
734 $(LIBPERL_NONSHR): $(obj)
735 $(RMS) $(LIBPERL_NONSHR)
736 $(AR) rcu $(LIBPERL_NONSHR) $(obj)
742 if test -s $Makefile_s ; then
744 $spitshell >>$Makefile <<!GROK!THIS!
746 Makefile: $Makefile_s
751 $spitshell >>$Makefile <<'!NO!SUBS!'
752 # dtrace dicards const qualifiers from arguments, put them back
753 $(DTRACE_H): perldtrace.d
754 $(DTRACE) -h -s perldtrace.d -o $(DTRACE_H).in
755 sed -e '/const/!s/char \*/const char */g' $(DTRACE_H).in >$(DTRACE_H)
756 $(RMS) $(DTRACE_H).in
758 mydtrace.h: $(DTRACE_H)
765 $spitshell >>$Makefile <<'!NO!SUBS!'
766 $(DTRACE_O): perldtrace.d $(ndt_obj)
767 $(DTRACE) -G -s perldtrace.d -o $(DTRACE_O) $(ndt_obj)
769 $(MINIDTRACE_O): perldtrace.d $(minindt_obj) perlmini$(OBJ_EXT)
770 $(DTRACE) -G -s perldtrace.d -o $(MINIDTRACE_O) $(minindt_obj) perlmini$(OBJ_EXT)
775 $spitshell >>$Makefile <<'!NO!SUBS!'
776 $(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT)
778 case "$useshrplib" in
780 $spitshell >>$Makefile <<'!NO!SUBS!'
782 $(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs)
786 $spitshell >>$Makefile <<'!NO!SUBS!'
787 rm -f libperl$(OBJ_EXT)
788 mv $@ libperl$(OBJ_EXT)
789 $(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
795 $spitshell >>$Makefile <<'!NO!SUBS!'
797 $(AR) rcu $(LIBPERL) $(obj) $(DYNALOADER)
798 @$(ranlib) $(LIBPERL)
802 $spitshell >>$Makefile <<'!NO!SUBS!'
804 # How to build executables.
806 # The $& notation tells Sequent machines that it can do a parallel make,
807 # and is harmless otherwise.
808 # The miniperl -w -MExporter line is a basic cheap test to catch errors
809 # before make goes on to run preplibrary and then MakeMaker on extensions.
810 # This is very handy because later errors are often caused by miniperl
811 # build problems but that's not obvious to the novice.
812 # The Module used here must not depend on Config or any extensions.
816 case "${osname}${osvers}" in
818 $spitshell >>$Makefile <<'!NO!SUBS!'
819 $(MINIPERL_EXE): $& $(mini_obj)
820 $(CC) -o $(MINIPERL_EXE) $(CLDFLAGS) $(mini_obj) $(libs)
821 $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
825 $spitshell >>$Makefile <<'!NO!SUBS!'
826 $(MINIPERL_EXE): $& $(mini_obj)
827 $(CC) -o $(MINIPERL_EXE) $(mini_obj) $(libs)
828 $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
834 *) case "$ldflags" in
835 *"-flat_namespace"*) ;;
836 *) # to allow opmini.o to override stuff in libperl.dylib
837 $spitshell >>$Makefile <<!NO!SUBS!
838 NAMESPACEFLAGS = -force_flat_namespace
844 $spitshell >>$Makefile <<'!NO!SUBS!'
845 $(MINIPERL_EXE): $& $(mini_obj)
847 $(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o $(MINIPERL_EXE) \
849 $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
853 $spitshell >>$Makefile <<'!NO!SUBS!'
854 $(MINIPERL_EXE): $& $(mini_obj)
856 $(LDLIBPTH) $(CC) $(CLDFLAGS) -o $(MINIPERL_EXE) \
858 $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
863 $spitshell >>$Makefile <<'!NO!SUBS!'
865 $(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
867 $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
869 # Purify/Quantify Perls.
871 pure$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
872 $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
874 purecov$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
875 $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
877 quant$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
878 $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
880 # Valgrind perl (currently Linux only)
882 perl.valgrind.config: config.sh
883 @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..."
884 @$(MAKE) perl.config.dashg
885 @echo "Checking usemymalloc='n' in config.sh..."
886 @grep "^usemymalloc=" config.sh
887 @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
888 @echo "And of course you have to have valgrind..."
889 $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1
891 # Third Degree Perl (Tru64 only)
894 @echo "Checking optimize='-g' in config.sh..."
895 @grep "^optimize=" config.sh
896 @egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1
898 perl.third.config: config.sh
899 @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..."
900 @$(MAKE) perl.config.dashg
901 @echo "Checking usemymalloc='n' in config.sh..."
902 @grep "^usemymalloc=" config.sh
903 @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
905 perl.third: /usr/bin/atom perl.third.config perl
906 atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl
907 @echo "Now you may run perl.third and then study perl.3log."
909 # Pixie Perls (Tru64 and IRIX only)
911 perl.pixie.config: config.sh
912 @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..."
913 @$(MAKE) perl.config.dashg
915 perl.pixie.atom: /usr/bin/atom perl
916 atom -tool pixie -L. -all -toolargs="-quiet" perl
918 perl.pixie.irix: perl
921 perl.pixie: /usr/bin/pixie perl.pixie.config perl
922 if test -x /usr/bin/atom; then \
923 $(MAKE) perl.pixie.atom; \
925 $(MAKE) perl.pixie.irix; \
927 @echo "Now you may run perl.pixie and then run pixie."
932 @echo "Checking optimize='-pg' in config.sh..."
933 @grep "^optimize=" config.sh
934 @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1
936 perl.gprof.config: config.sh
937 @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..."
938 @$(MAKE) perl.config.dashpg
940 perl.gprof: /usr/bin/gprof perl.gprof.config
942 $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl
943 @echo "Now you may run perl.gprof and then run gprof perl.gprof."
948 @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..."
949 @echo "Checking gccversion in config.sh..."
950 @grep "^gccversion=" config.sh
951 @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1
952 @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..."
953 @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..."
954 @grep "^ccflags=" config.sh
955 @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1
957 perl.gcov: perl.config.gcov
959 $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl
960 @echo "Now you may run perl.gcov and then run gcov some.c."
962 # Microperl. This is just a convenience thing if one happens to
963 # build also the full Perl and therefore the real big Makefile:
964 # usually one should manually explicitly issue the below command.
968 $(MAKE) -f Makefile.micro
974 # Some environment have no system(), which mkpport uses.
975 # Let's try running the commands with shell.
978 $spitshell >>$Makefile <<!GROK!THIS!
980 makeppport: \$(MINIPERL_EXE) \$(CONFIGPM)
981 -@for f in Makefile.PL PPPort_pm.PL PPPort_xs.PL ppport_h.PL; do \
982 (cd ext/Devel-PPPort && `pwd`/run.sh ../../$(MINIPERL_EXE) -I../../lib \$\$f); \
988 $spitshell >>$Makefile <<'!NO!SUBS!'
990 makeppport: $(MINIPERL_EXE) $(CONFIGPM) $(nonxs_ext)
991 $(MINIPERL) $(Icwd) mkppport
997 $spitshell >>$Makefile <<'!NO!SUBS!'
1000 preplibrary: $(MINIPERL_EXE) $(CONFIGPM) $(PREPLIBRARY_LIBPERL)
1002 $(CONFIGPM_FROM_CONFIG_SH): $(CONFIGPOD)
1004 $(CONFIGPOD): config.sh $(MINIPERL_EXE) configpm Porting/Glossary lib/Config_git.pl
1005 $(MINIPERL) configpm
1007 lib/ExtUtils/Miniperl.pm: miniperlmain.c $(MINIPERL_EXE) minimod.pl $(CONFIGPM)
1008 $(MINIPERL) minimod.pl > lib/ExtUtils/Miniperl.pm
1010 lib/buildcustomize.pl: $(MINIPERL_EXE) write_buildcustomize.pl
1011 $(MINIPERL) write_buildcustomize.pl >lib/buildcustomize.pl
1013 unidatafiles $(unidatafiles) pod/perluniprops.pod: uni.data
1015 uni.data: $(MINIPERL_EXE) $(CONFIGPM) lib/unicore/mktables $(nonxs_ext)
1016 $(MINIPERL) $(Icwd) lib/unicore/mktables -C lib/unicore -P pod -maketest -makelist -p
1017 # Commented out so always runs, mktables looks at far more files than we
1018 # can in this makefile to decide if needs to run or not
1021 # $(PERL_EXE) and ext because buildtoc uses Text::Wrap uses re
1022 # But also this ensures that all extensions are built before we try to scan
1023 # them, which picks up Devel::PPPort's documentation.
1024 pod/perltoc.pod: $(perltoc_pod_prereqs) $(PERL_EXE) $(ext) pod/buildtoc
1025 $(RUN_PERL) -f -Ilib pod/buildtoc --build-toc -q
1027 pod/perlapi.pod: pod/perlintern.pod
1029 pod/perlintern.pod: $(MINIPERL_EXE) autodoc.pl embed.fnc
1030 $(MINIPERL) autodoc.pl
1032 pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST
1033 $(MINIPERL) $(Icwd) pod/perlmodlib.PL -q
1035 pod/perl5152delta.pod: pod/perldelta.pod
1036 $(LNS) perldelta.pod pod/perl5152delta.pod
1038 extra.pods: $(MINIPERL_EXE)
1039 -@test ! -f extra.pods || rm -f `cat extra.pods`
1041 -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
1042 nx=`echo $$x | sed -e "s/README\.//"`; \
1043 $(LNS) ../$$x "pod/perl"$$nx".pod" ; \
1044 echo "pod/perl"$$nx".pod" >> extra.pods ; \
1047 extras.make: $(PERL_EXE)
1048 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
1050 extras.test: $(PERL_EXE)
1051 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
1053 extras.install: $(PERL_EXE)
1054 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
1056 .PHONY: install install-strip install-all install-verbose install-silent \
1057 no-install install.perl install.man install.html
1060 $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)"
1062 install install-all:
1063 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)"
1066 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)"
1069 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)"
1072 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)"
1074 # Set this to an empty string to avoid an attempt of rebuild before install
1075 INSTALL_DEPENDENCE = all
1077 install.perl: $(INSTALL_DEPENDENCE) installperl
1078 $(RUN_PERL) installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
1079 -@test ! -s extras.lst || $(MAKE) extras.install
1081 install.man: all installman
1082 $(RUN_PERL) installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
1084 # XXX Experimental. Hardwired values, but useful for testing.
1085 # Eventually Configure could ask for some of these values.
1086 install.html: all installhtml
1087 -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
1088 $(RUN_PERL) installhtml \
1089 --podroot=. --podpath=. --recurse \
1090 --htmldir=$(privlib)/html \
1091 --htmlroot=$(privlib)/html \
1092 --splithead=pod/perlipc \
1093 --splititem=pod/perlfunc \
1094 --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
1095 --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \
1099 # I now supply perly.c with the kits, so the following section is
1100 # used only if you force bison to run by saying
1102 # You normally shouldn't remake perly.[ch].
1107 @echo "run_byacc is obsolete; try 'make regen_perly' instead"
1109 # this outputs perly.h, perly.act and perly.tab
1113 # We don't want to regenerate perly.c and perly.h, but they might
1114 # appear out-of-date after a patch is applied or a new distribution is
1122 SYM = global.sym globvar.sym perlio.sym
1124 SYMH = perlvars.h intrpvar.h
1128 # The following files are generated automatically
1129 # embed.pl: proto.h embed.h embedvar.h global.sym
1130 # perlapi.h perlapi.c
1131 # opcode.pl: opcode.h opnames.h pp_proto.h
1132 # regcomp.pl: regnodes.h
1133 # warnings.pl: warnings.h lib/warnings.pm
1134 # The correct versions should be already supplied with the perl kit,
1135 # in case you don't have perl available.
1136 # To force them to be regenerated, run
1138 # with your existing copy of perl
1139 # (make regen_headers is kept for backwards compatibility)
1141 AUTOGEN_FILES = opcode.h opnames.h pp_proto.h proto.h \
1142 embed.h embedvar.h global.sym \
1143 perlapi.h perlapi.c regnodes.h \
1144 warnings.h lib/warnings.pm
1146 .PHONY: regen_headers regen_all
1151 regen_headers: FORCE
1154 regen_meta: META.yml
1157 PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib Porting/makemeta
1160 regen_all: regen regen_meta
1162 .PHONY: manisort manicheck
1165 @perl Porting/manisort -q || (echo "WARNING: re-sorting MANIFEST"; \
1166 perl Porting/manisort -q -o MANIFEST; sh -c true)
1169 perl Porting/manicheck
1172 # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
1173 # automatically get built. There should ordinarily be no need to change
1174 # any of this part of makefile.
1176 # The dummy dependency is a place holder in case $(dynamic_ext) or
1177 # $(static_ext) is empty.
1179 # DynaLoader may be needed for extensions that use Makefile.PL.
1181 $(DYNALOADER): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary FORCE $(nonxs_ext)
1182 $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
1184 d_dummy $(dynamic_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE $(PERLEXPORT)
1185 $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
1187 s_dummy $(static_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE
1188 $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
1190 n_dummy $(nonxs_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary FORCE
1191 $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
1194 $spitshell >>$Makefile <<EOF
1198 $spitshell >>$Makefile <<'!NO!SUBS!'
1202 @eval `$(RUN_PERL) -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR)
1204 .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
1205 realclean _realcleaner clobber _clobber \
1206 distclean veryclean _verycleaner
1210 realclean: _realcleaner _mopup
1211 @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh"
1214 -@rm -f Cross/run-* Cross/to-* Cross/from-*
1216 rm -f config.sh cppstdin Policy.sh extras.lst
1218 clobber: _realcleaner _mopup _clobber
1222 # Like distclean but also removes emacs backups and *.orig.
1223 veryclean: _verycleaner _mopup _clobber
1224 -@rm -f Obsolete Wanted
1226 # Do not 'make _mopup' directly.
1228 rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c perlmini.c uudmap.h generate_uudmap$(EXE_EXT) bitcount.h mg_data.h
1230 -@test -f extra.pods && rm -f `cat extra.pods`
1231 -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
1232 -rm -f perl.exp ext.libs $(generated_pods) uni.data opmini.o perlmini.o
1233 -rm -f perl.export perl.dll perl.libexp perl.map perl.def
1234 -rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
1235 -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
1236 -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
1237 -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
1238 -rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
1239 -rm -f $(PERL_EXE) $(MINIPERL_EXE) $(LIBPERL) libperl.* microperl
1240 -rm -f config.arch config.over $(DTRACE_H) runtests
1242 # Do not 'make _tidy' directly.
1244 -cd pod; $(LDLIBPTH) $(MAKE) clean
1245 -cd utils; $(LDLIBPTH) $(MAKE) clean
1246 -cd x2p; $(LDLIBPTH) $(MAKE) clean
1247 -rm -f lib/Config_git.pl git_version.h
1248 -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
1249 $(MINIPERL) make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \
1253 -cd os2; rm -f Makefile
1254 -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN)
1255 -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN)
1256 -cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN)
1257 -@if test -f $(MINIPERL_EXE) ; then \
1258 for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
1259 $(MINIPERL) make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \
1264 rm -f realclean.sh veryclean.sh
1265 -for file in `find cpan dist ext -name ppport.h` ; do rm -f $$file; done
1267 # Dear POSIX, thanks for making the default to xargs to be
1268 # run once if nothhing is passed in. It is such a great help.
1270 # Some systems do not support "?", so keep these files separate.
1272 -rm -f core.*perl.*.? t/core.perl.*.? .?*.c
1273 rm -f core *perl.core t/core t/*perl.core core.* t/core.*
1274 rm -f t/$(PERL_EXE) t/rantests
1276 rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
1277 rm -rf $(addedbyconf)
1278 rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old
1280 rm -rf $(unidatafiles) $(unidatadirs)
1282 rm -f lib/.exists lib/*/.exists lib/*/*/.exists
1283 rm -f h2ph.man pstruct
1286 rm -rf lib/Encode lib/Compress lib/Hash lib/re
1287 rm -rf lib/TAP lib/Module/Pluggable lib/App
1289 rm -rf lib/IO/Compress lib/IO/Uncompress
1290 rm -f lib/ExtUtils/ParseXS/t/XSTest.c
1291 rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT)
1292 rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX)
1294 rm -fr lib/CPAN lib/CPANPLUS
1295 rm -fr lib/ExtUtils/CBuilder
1296 -rmdir cpan/CPANPLUS-Dist-Build/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-localmirror
1298 -rmdir lib/Archive/Tar lib/Archive lib/Attribute
1300 -rmdir lib/Data lib/Devel lib/Digest
1301 -rmdir lib/ExtUtils/Command lib/ExtUtils/Constant lib/ExtUtils/Liblist lib/ExtUtils/MakeMaker
1302 -rmdir lib/File/Spec lib/Filter/Util lib/Filter
1303 -rmdir lib/I18N/LangTags lib/IO/Socket lib/IO lib/IPC
1304 -rmdir lib/List/Util lib/List
1305 -rmdir lib/Locale/Maketext lib/Locale
1306 -rmdir lib/Log/Message lib/Log
1307 -rmdir lib/Math/Big* lib/Math
1308 -rmdir lib/Memoize lib/MIME
1309 -rmdir lib/Module/Build/Platform lib/Module/Build lib/Module/Load lib/Module
1310 -rmdir lib/Net/FTP lib/Object
1311 -rmdir lib/Parse/CPAN lib/Parse
1312 -rmdir lib/PerlIO/via lib/PerlIO
1313 -rmdir lib/Package lib/Params
1314 -rmdir lib/Pod/Perldoc lib/Pod/Simple lib/Pod/Text
1315 -rmdir lib/Sys lib/Scalar/Util lib/Scalar
1316 -rmdir lib/Term/UI lib/Thread lib/Tie/Hash
1317 -rmdir lib/Test/Builder/Tester lib/Test/Builder lib/Test
1318 -rmdir lib/Unicode/Collate
1319 -rmdir lib/XS/APItest lib/XS
1320 -rmdir lib/inc/latest lib/inc
1321 -rmdir lib/autodie/exception lib/autodie lib/encoding lib/threads
1322 -rm -f lib/ExtUtils/CBuilder/t/libcompilet.dll.a
1323 -rm -f lib/ExtUtils/ParseXS/t/libXSTest.dll.a
1326 @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=distclean
1327 @$(LDLIBPTH) $(MAKE) _cleaner2
1330 @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean
1331 @$(LDLIBPTH) $(MAKE) _cleaner2
1332 -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig
1337 lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c)
1341 splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles)
1343 # Need to unset during recursion to go out of loop.
1344 # The README below ensures that the dependency list is never empty and
1345 # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding.
1347 MAKEDEPEND = Makefile makedepend
1349 $(FIRSTMAKEFILE): README $(MAKEDEPEND)
1350 $(MAKE) depend MAKEDEPEND=
1352 config.h: config_h.SH config.sh
1353 $(SHELL) config_h.SH
1357 sh ./makedepend MAKE=$(MAKE)
1358 cd x2p; $(MAKE) depend
1360 # Cannot postpone this until $firstmakefile is ready ;-)
1361 makedepend: makedepend.SH config.sh
1364 runtests: runtests.SH config.sh
1367 .PHONY: test check test_prep test_prep_nodll test_prep_pre \
1368 test_prep_reonly test_tty test-tty test_notty test-notty \
1369 utest ucheck test.utf8 check.utf8 test.torture torturetest \
1370 test.utf16 check.utf16 utest.utf16 ucheck.utf16 \
1371 test.third check.third utest.third ucheck.third test_notty.third \
1372 test.deparse test_notty.deparse test_harness test_harness_notty \
1373 minitest coretest test.taintwarn test-reonly _test
1376 echo >&2 The _test target is deprecated. Please upgrade your smoker
1377 PERL=./perl $(RUN_TESTS) choose
1379 # Cannot delegate rebuilding of t/perl to make
1380 # to allow interlaced test and minitest
1382 # Architecture-neutral stuff:
1384 test_prep_pre: preplibrary utilities $(nonxs_ext)
1386 test_prep: test_prep_pre $(MINIPERL_EXE) $(unidatafiles) $(PERL_EXE) \
1387 $(dynamic_ext) $(TEST_PERL_DLL) runtests x2p/s2p x2p/find2perl \
1389 cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE))
1391 test_prep_reonly: $(MINIPERL_EXE) $(PERL_EXE) $(dynamic_ext_re) $(TEST_PERL_DLL)
1392 $(MINIPERL) make_ext.pl $(dynamic_ext_re) MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
1393 cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE))
1395 test check: test_prep
1401 test_notty: test_prep
1404 utest ucheck test.utf8 check.utf8: test_prep
1405 TEST_ARGS=-utf8 $(RUN_TESTS) choose
1408 TEST_ARGS=-core $(RUN_TESTS) choose
1410 test-prep: test_prep
1414 test-notty: test_notty
1418 test.torture torturetest: test_prep
1419 TEST_ARGS=-torture $(RUN_TESTS) choose
1421 # Targets for UTF16 testing:
1423 minitest.utf16: minitest.prep
1424 - cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE)) \
1425 && $(RUN_PERL) TEST -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
1427 test.utf16 check.utf16: test_prep
1428 TEST_ARGS=-utf16 $(RUN_TESTS) choose
1430 utest.utf16 ucheck.utf16: test_prep
1431 TEST_ARGS="-utf8 -utf16" $(RUN_TESTS) choose
1433 # Targets for valgrind testing:
1435 test_prep.valgrind: test_prep perl.valgrind
1437 test.valgrind check.valgrind: test_prep perl.valgrind.config
1438 PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(RUN_TESTS) choose
1440 utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config
1441 PERL_VALGRIND=1 TEST_ARGS=-utf8 $(RUN_TESTS) choose
1443 test_notty.valgrind: test_prep.valgrind perl.valgrind.config
1444 PERL_VALGRIND=1 $(RUN_TESTS) no-tty
1446 # Targets for Third Degree testing.
1448 test_prep.third: test_prep perl.third
1449 cd t && (rm -f ./perl.third$(EXE_EXT); $(LNS) ../perl.third$(EXE_EXT) perl.third(EXE_EXT))
1451 test.third check.third: test_prep.third perl.third
1452 PERL=./perl.third PERL_3LOG=1 $(RUN_TESTS) choose
1454 utest.third ucheck.third: test_prep.third perl.third
1455 PERL=./perl.third PERL_3LOG=1 TEST_ARGS=-utf8 $(RUN_TESTS) choose
1457 test_notty.third: test_prep.third perl.third
1458 PERL=./perl.third PERL_3LOG=1 $(RUN_TESTS) choose
1460 # Targets for Deparse testing.
1462 test.deparse: test_prep
1463 TEST_ARGS=-deparse $(RUN_TESTS) choose
1465 test_notty.deparse: test_prep
1466 TEST_ARGS=-deparse $(RUN_TESTS) no-tty
1468 # Targets to run the test suite with -t
1470 test.taintwarn: test_prep
1471 TEST_ARGS=-taintwarn $(RUN_TESTS) choose
1474 -@test -f lib/Config.pm || $(MAKE) lib/Config.pm $(unidatafiles)
1476 @echo "You may see some irrelevant test failures if you have been unable"
1477 @echo "to build lib/Config.pm, or the Unicode data files."
1480 # Can't depend on lib/Config.pm because that might be where miniperl
1482 minitest: $(MINIPERL_EXE) minitest.prep
1483 - cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE)) \
1484 && $(RUN_PERL) TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t op/*.t uni/*.t </dev/tty
1488 test_harness: test_prep
1489 TESTFILE=harness $(RUN_TESTS) choose
1491 test_harness_notty: test_prep
1492 HARNESS_NOTTY=1 TESTFILE=harness $(RUN_TESTS) choose
1494 test-reonly: test_prep_reonly
1495 TEST_ARGS='-re \bre\/' TESTFILE=harness $(RUN_TESTS) choose
1498 # Porting tests (well-formedness of pod, manifest, etc)
1500 test_porting: test_prep
1501 cd t && $(RUN_PERL) harness porting/*.t ../lib/diagnostics.t
1503 # Handy way to run perlbug -ok without having to install and run the
1504 # installed perlbug. We don't re-run the tests here - we trust the user.
1505 # Please *don't* use this unless all tests pass.
1506 # If you want to report test failures, use "make nok" instead.
1508 .PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack
1511 $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)'
1514 $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok
1517 $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A
1519 okfilenack: utilities
1520 $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A
1523 $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)'
1526 $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok
1529 $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A
1531 nokfilenack: utilities
1532 $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
1534 .PHONY: clist hlist shlist
1537 echo $(c) | tr ' ' $(TRNL) >.clist
1540 echo $(h) | tr ' ' $(TRNL) >.hlist
1543 echo $(sh) | tr ' ' $(TRNL) >.shlist
1545 Makefile: Makefile.SH ./config.sh
1546 $(SHELL) Makefile.SH
1550 perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
1555 ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c --exclude=perlmini.c *.c *.h
1557 # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
1558 # If this runs make out of memory, delete /usr/include lines.
1565 $ln Makefile ../Makefile
1568 $rm -f $firstmakefile
1570 # Now do any special processing required before building.
1575 echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2
1580 rm -f y.tab.c y.tab.h
1583 # we are using two different yaccs in BS2000 Posix!
1584 byacc a2p.y >/dev/null 2>&1
1587 yacc a2p.y >/dev/null 2>&1
1590 if cmp -s y.tab.c a2p.c
1594 echo "a2p.y -> a2p.c" >&2
1597 sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
1598 -e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \
1599 -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c
1602 # In case somebody yacc -d:ed the a2p.y.
1605 if cmp -s y.tab.h a2p.h
1609 echo "a2p.h -> a2p.h" >&2
1618 # Do nothing in VM/ESA.
1621 echo "'$osname' is an EBCDIC system I don't know that well." >&4
1625 '') echo "No parser files were regenerated. That's okay." >&2 ;;
1630 # ex: set ts=8 sts=4 sw=4 noet: