3 * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
4 * 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 by Larry Wall and others
6 * You may distribute under the terms of either the GNU General Public
7 * License or the Artistic License, as specified in the README file.
12 * The fields of BASEOP are:
13 * op_next Pointer to next ppcode to execute after this one.
14 * (Top level pre-grafted op points to first op,
15 * but this is replaced when op is grafted in, when
16 * this op will point to the real next op, and the new
17 * parent takes over role of remembering starting op.)
18 * op_ppaddr Pointer to current ppcode's function.
19 * op_type The type of the operation.
20 * op_opt Whether or not the op has been optimised by the
23 * See the comments in S_clear_yystack() for more
24 * details on the following three flags:
26 * op_latefree tell op_free() to clear this op (and free any kids)
27 * but not yet deallocate the struct. This means that
28 * the op may be safely op_free()d multiple times
29 * op_latefreed an op_latefree op has been op_free()d
30 * op_attached this op (sub)tree has been attached to a CV
32 * op_spare three spare bits!
33 * op_flags Flags common to all operations. See OPf_* below.
34 * op_private Flags peculiar to a particular operation (BUT,
35 * by default, set to the number of children until
36 * the operation is privatized by a check routine,
37 * which may or may not check number of children).
39 #include "op_reg_common.h"
44 # define MADPROP_IN_BASEOP MADPROP* op_madprop;
46 # define MADPROP_IN_BASEOP
49 typedef PERL_BITFIELD16 Optype;
51 #ifdef BASEOP_DEFINITION
52 #define BASEOP BASEOP_DEFINITION
57 OP* (*op_ppaddr)(pTHX); \
60 PERL_BITFIELD16 op_type:9; \
61 PERL_BITFIELD16 op_opt:1; \
62 PERL_BITFIELD16 op_latefree:1; \
63 PERL_BITFIELD16 op_latefreed:1; \
64 PERL_BITFIELD16 op_attached:1; \
65 PERL_BITFIELD16 op_spare:3; \
70 /* If op_type:9 is changed to :10, also change PUSHEVAL in cop.h.
71 Also, if the type of op_type is ever changed (e.g. to PERL_BITFIELD32)
72 then all the other bit-fields before/after it should change their
73 types too to let VC pack them into the same 4 byte integer.*/
75 #define OP_GIMME(op,dfl) \
76 (((op)->op_flags & OPf_WANT) == OPf_WANT_VOID ? G_VOID : \
77 ((op)->op_flags & OPf_WANT) == OPf_WANT_SCALAR ? G_SCALAR : \
78 ((op)->op_flags & OPf_WANT) == OPf_WANT_LIST ? G_ARRAY : \
81 #define OP_GIMME_REVERSE(flags) ((flags) & G_WANT)
86 =for apidoc Amn|U32|GIMME_V
87 The XSUB-writer's equivalent to Perl's C<wantarray>. Returns C<G_VOID>,
88 C<G_SCALAR> or C<G_ARRAY> for void, scalar or list context,
89 respectively. See L<perlcall> for a usage example.
91 =for apidoc Amn|U32|GIMME
92 A backward-compatible version of C<GIMME_V> which can only return
93 C<G_SCALAR> or C<G_ARRAY>; in a void context, it returns C<G_SCALAR>.
94 Deprecated. Use C<GIMME_V> instead.
99 #define GIMME_V OP_GIMME(PL_op, block_gimme())
103 #define OPf_WANT 3 /* Mask for "want" bits: */
104 #define OPf_WANT_VOID 1 /* Want nothing */
105 #define OPf_WANT_SCALAR 2 /* Want single value */
106 #define OPf_WANT_LIST 3 /* Want list of any length */
107 #define OPf_KIDS 4 /* There is a firstborn child. */
108 #define OPf_PARENS 8 /* This operator was parenthesized. */
109 /* (Or block needs explicit scope entry.) */
110 #define OPf_REF 16 /* Certified reference. */
111 /* (Return container, not containee). */
112 #define OPf_MOD 32 /* Will modify (lvalue). */
113 #define OPf_STACKED 64 /* Some arg is arriving on the stack. */
114 #define OPf_SPECIAL 128 /* Do something weird for this op: */
115 /* On local LVAL, don't init local value. */
116 /* On OP_SORT, subroutine is inlined. */
117 /* On OP_NOT, inversion was implicit. */
118 /* On OP_LEAVE, don't restore curpm. */
119 /* On truncate, we truncate filehandle */
120 /* On control verbs, we saw no label */
121 /* On flipflop, we saw ... instead of .. */
122 /* On UNOPs, saw bare parens, e.g. eof(). */
123 /* On OP_ENTERSUB || OP_NULL, saw a "do". */
124 /* On OP_EXISTS, treat av as av, not avhv. */
125 /* On OP_(ENTER|LEAVE)EVAL, don't clear $@ */
126 /* On pushre, rx is used as part of split, e.g. split " " */
127 /* On regcomp, "use re 'eval'" was in scope */
128 /* On OP_READLINE, was <$filehandle> */
129 /* On RV2[ACGHS]V, don't create GV--in
131 /* On OP_DBSTATE, indicates breakpoint
132 * (runtime property) */
133 /* On OP_REQUIRE, was seen as CORE::require */
134 /* On OP_ENTERWHEN, there's no condition */
135 /* On OP_SMARTMATCH, an implicit smartmatch */
136 /* On OP_ANONHASH and OP_ANONLIST, create a
137 reference to the new anon hash or array */
138 /* On OP_HELEM and OP_HSLICE, localization will be followed
139 by assignment, so do not wipe the target if it is special
140 (e.g. a glob or a magic SV) */
141 /* On OP_MATCH, OP_SUBST & OP_TRANS, the
142 operand of a logical or conditional
143 that was optimised away, so it should
144 not be bound via =~ */
145 /* On OP_CONST, from a constant CV */
146 /* On OP_GLOB, use Perl glob function */
148 /* old names; don't use in new code, but don't break them, either */
149 #define OPf_LIST OPf_WANT_LIST
150 #define OPf_KNOW OPf_WANT
153 (PL_op->op_flags & OPf_WANT \
154 ? ((PL_op->op_flags & OPf_WANT) == OPf_WANT_LIST \
159 /* Lower bits of op_private often carry the number of arguments, as
160 * set by newBINOP, newUNOP and ck_fun */
162 /* NOTE: OP_NEXTSTATE and OP_DBSTATE (i.e. COPs) carry lower
163 * bits of PL_hints in op_private */
165 /* Private for lvalues */
166 #define OPpLVAL_INTRO 128 /* Lvalue must be localized or lvalue sub */
168 /* Private for OPs with TARGLEX */
169 /* (lower bits may carry MAXARG) */
170 #define OPpTARGET_MY 16 /* Target is PADMY. */
172 /* Private for OP_LEAVE, OP_LEAVESUB, OP_LEAVESUBLV and OP_LEAVEWRITE */
173 #define OPpREFCOUNTED 64 /* op_targ carries a refcount */
175 /* Private for OP_AASSIGN */
176 #define OPpASSIGN_COMMON 64 /* Left & right have syms in common. */
178 /* Private for OP_SASSIGN */
179 #define OPpASSIGN_BACKWARDS 64 /* Left & right switched. */
180 #define OPpASSIGN_CV_TO_GV 128 /* Possible optimisation for constants. */
182 /* Private for OP_MATCH and OP_SUBST{,CONST} */
183 #define OPpRUNTIME 64 /* Pattern coming in on the stack */
185 /* Private for OP_TRANS */
186 #define OPpTRANS_FROM_UTF 1
187 #define OPpTRANS_TO_UTF 2
188 #define OPpTRANS_IDENTICAL 4 /* right side is same as left */
189 #define OPpTRANS_SQUASH 8
190 /* 16 is used for OPpTARGET_MY */
191 #define OPpTRANS_COMPLEMENT 32
192 #define OPpTRANS_GROWS 64
193 #define OPpTRANS_DELETE 128
194 #define OPpTRANS_ALL (OPpTRANS_FROM_UTF|OPpTRANS_TO_UTF|OPpTRANS_IDENTICAL|OPpTRANS_SQUASH|OPpTRANS_COMPLEMENT|OPpTRANS_GROWS|OPpTRANS_DELETE)
196 /* Private for OP_REPEAT */
197 #define OPpREPEAT_DOLIST 64 /* List replication. */
199 /* Private for OP_RV2GV, OP_RV2SV, OP_AELEM, OP_HELEM, OP_PADSV */
200 #define OPpDEREF (32|64) /* autovivify: Want ref to something: */
201 #define OPpDEREF_AV 32 /* Want ref to AV. */
202 #define OPpDEREF_HV 64 /* Want ref to HV. */
203 #define OPpDEREF_SV (32|64) /* Want ref to SV. */
205 /* OP_ENTERSUB only */
206 #define OPpENTERSUB_DB 16 /* Debug subroutine. */
207 #define OPpENTERSUB_HASTARG 4 /* Called from OP tree. */
208 #define OPpENTERSUB_INARGS 1 /* Lval used as arg to a sub. */
209 /* used by OPpDEREF (32|64) */
210 /* used by HINT_STRICT_SUBS 2 */
211 /* Mask for OP_ENTERSUB flags, the absence of which must be propagated
212 in dynamic context */
213 #define OPpENTERSUB_LVAL_MASK (OPpLVAL_INTRO|OPpENTERSUB_INARGS)
216 #define OPpENTERSUB_AMPER 8 /* Used & form to call. */
217 #define OPpENTERSUB_NOPAREN 128 /* bare sub call (without parens) */
218 #define OPpMAY_RETURN_CONSTANT 1 /* If a constant sub, return the constant */
221 #define OPpEARLY_CV 32 /* foo() called before sub foo was parsed */
223 #define OPpLVAL_DEFER 16 /* Defer creation of array/hash elem */
224 /* OP_RV2?V, OP_GVSV, OP_ENTERITER only */
225 #define OPpOUR_INTRO 16 /* Variable was in an our() */
226 /* OP_RV2[AGH]V, OP_PAD[AH]V, OP_[AH]ELEM, OP_[AH]SLICE OP_AV2ARYLEN,
227 OP_R?KEYS, OP_SUBSTR, OP_POS, OP_VEC */
228 #define OPpMAYBE_LVSUB 8 /* We might be an lvalue to return */
230 #define OPpPAD_STATE 16 /* is a "state" pad */
231 /* for OP_RV2?V, lower bits carry hints (currently only HINT_STRICT_REFS) */
234 #define OPpDONT_INIT_GV 4 /* Call gv_fetchpv with GV_NOINIT */
235 /* (Therefore will return whatever is currently in the symbol table, not
236 guaranteed to be a PVGV) */
238 /* Private for OP_ENTERITER and OP_ITER */
239 #define OPpITER_REVERSED 4 /* for (reverse ...) */
240 #define OPpITER_DEF 8 /* for $_ or for my $_ */
242 /* Private for OP_CONST */
243 #define OPpCONST_NOVER 2 /* no 6; */
244 #define OPpCONST_SHORTCIRCUIT 4 /* eg the constant 5 in (5 || foo) */
245 #define OPpCONST_STRICT 8 /* bareword subject to strict 'subs' */
246 #define OPpCONST_ENTERED 16 /* Has been entered as symbol. */
247 #define OPpCONST_BARE 64 /* Was a bare word (filehandle?). */
248 #define OPpCONST_WARNING 128 /* Was a $^W translated to constant. */
250 /* Private for OP_FLIP/FLOP */
251 #define OPpFLIP_LINENUM 64 /* Range arg potentially a line num. */
253 /* Private for OP_LIST */
254 #define OPpLIST_GUESSED 64 /* Guessed that pushmark was needed. */
256 /* Private for OP_DELETE */
257 #define OPpSLICE 64 /* Operating on a list of keys */
258 /* Also OPpLVAL_INTRO (128) */
260 /* Private for OP_EXISTS */
261 #define OPpEXISTS_SUB 64 /* Checking for &sub, not {} or []. */
263 /* Private for OP_SORT */
264 #define OPpSORT_NUMERIC 1 /* Optimized away { $a <=> $b } */
265 #define OPpSORT_INTEGER 2 /* Ditto while under "use integer" */
266 #define OPpSORT_REVERSE 4 /* Reversed sort */
267 #define OPpSORT_INPLACE 8 /* sort in-place; eg @a = sort @a */
268 #define OPpSORT_DESCEND 16 /* Descending sort */
269 #define OPpSORT_QSORT 32 /* Use quicksort (not mergesort) */
270 #define OPpSORT_STABLE 64 /* Use a stable algorithm */
272 /* Private for OP_REVERSE */
273 #define OPpREVERSE_INPLACE 8 /* reverse in-place (@a = reverse @a) */
275 /* Private for OP_OPEN and OP_BACKTICK */
276 #define OPpOPEN_IN_RAW 16 /* binmode(F,":raw") on input fh */
277 #define OPpOPEN_IN_CRLF 32 /* binmode(F,":crlf") on input fh */
278 #define OPpOPEN_OUT_RAW 64 /* binmode(F,":raw") on output fh */
279 #define OPpOPEN_OUT_CRLF 128 /* binmode(F,":crlf") on output fh */
281 /* Private for OP_EXIT, HUSH also for OP_DIE */
282 #define OPpHUSH_VMSISH 64 /* hush DCL exit msg vmsish mode*/
283 #define OPpEXIT_VMSISH 128 /* exit(0) vs. exit(1) vmsish mode*/
285 /* Private for OP_FTXXX */
286 #define OPpFT_ACCESS 2 /* use filetest 'access' */
287 #define OPpFT_STACKED 4 /* stacked filetest, as "-f" in "-f -x $f" */
288 #define OPpFT_STACKING 8 /* stacking filetest, as "-x" in "-f -x $f" */
290 /* Private for OP_(MAP|GREP)(WHILE|START) */
291 #define OPpGREP_LEX 2 /* iterate over lexical $_ */
293 /* Private for OP_ENTEREVAL */
294 #define OPpEVAL_HAS_HH 2 /* Does it have a copy of %^H */
296 /* Private for OP_CALLER and OP_WANTARRAY */
297 #define OPpOFFBYONE 128 /* Treat caller(1) as caller(2) */
299 /* Private for OP_COREARGS */
300 /* These must not conflict with OPpDONT_INIT_GV. See pp.c:S_rv2gv. */
301 #define OPpCOREARGS_DEREF1 1 /* Arg 1 is a handle constructor */
302 #define OPpCOREARGS_DEREF2 2 /* Arg 2 is a handle constructor */
303 #define OPpCOREARGS_SCALARMOD 64 /* \$ rather than \[$@%*] */
304 #define OPpCOREARGS_PUSHMARK 128 /* Call pp_pushmark */
340 REGEXP * op_pmregexp; /* compiled expression */
344 OP * op_pmreplroot; /* For OP_SUBST */
346 PADOFFSET op_pmtargetoff; /* For OP_PUSHRE */
352 OP * op_pmreplstart; /* Only used in OP_SUBST */
355 char * op_pmstashpv; /* Only used in OP_MATCH, with PMf_ONCE set */
356 U32 op_pmstashflags; /* currently only SVf_UTF8 or 0 */
365 #define PM_GETRE(o) (SvTYPE(PL_regex_pad[(o)->op_pmoffset]) == SVt_REGEXP \
366 ? (REGEXP*)(PL_regex_pad[(o)->op_pmoffset]) : NULL)
367 /* The assignment is just to enforce type safety (or at least get a warning).
369 /* With first class regexps not via a reference one needs to assign
370 &PL_sv_undef under ithreads. (This would probably work unthreaded, but NULL
371 is cheaper. I guess we could allow NULL, but the check above would get
372 more complex, and we'd have an AV with (SV*)NULL in it, which feels bad */
373 /* BEWARE - something that calls this macro passes (r) which has a side
375 #define PM_SETRE(o,r) STMT_START { \
376 REGEXP *const _pm_setre = (r); \
378 PL_regex_pad[(o)->op_pmoffset] = MUTABLE_SV(_pm_setre); \
381 #define PM_GETRE(o) ((o)->op_pmregexp)
382 #define PM_SETRE(o,r) ((o)->op_pmregexp = (r))
385 /* Leave some space, so future bit allocations can go either in the shared or
386 * unshared area without affecting binary compatibility */
387 #define PMf_BASE_SHIFT (_RXf_PMf_SHIFT_NEXT+6)
389 /* 'use re "taint"' in scope: taint $1 etc. if target tainted */
390 #define PMf_RETAINT (1<<(PMf_BASE_SHIFT+0))
392 /* match successfully only once per reset, with related flag RXf_USED in
393 * re->extflags holding state. This is used only for ?? matches, and only on
394 * OP_MATCH and OP_QR */
395 #define PMf_ONCE (1<<(PMf_BASE_SHIFT+1))
397 /* replacement contains variables */
398 #define PMf_MAYBE_CONST (1<<(PMf_BASE_SHIFT+2))
400 /* PMf_ONCE has matched successfully. Not used under threading. */
401 #define PMf_USED (1<<(PMf_BASE_SHIFT+3))
403 /* subst replacement is constant */
404 #define PMf_CONST (1<<(PMf_BASE_SHIFT+4))
406 /* keep 1st runtime pattern forever */
407 #define PMf_KEEP (1<<(PMf_BASE_SHIFT+5))
409 #define PMf_GLOBAL (1<<(PMf_BASE_SHIFT+6)) /* pattern had a g modifier */
411 /* don't reset pos() if //g fails */
412 #define PMf_CONTINUE (1<<(PMf_BASE_SHIFT+7))
414 /* evaluating replacement as expr */
415 #define PMf_EVAL (1<<(PMf_BASE_SHIFT+8))
417 /* Return substituted string instead of modifying it. */
418 #define PMf_NONDESTRUCT (1<<(PMf_BASE_SHIFT+9))
420 #if PMf_BASE_SHIFT+9 > 31
421 # error Too many PMf_ bits used. See above and regnodes.h for any spare in middle
426 # define PmopSTASHPV(o) \
427 (((o)->op_pmflags & PMf_ONCE) ? (o)->op_pmstashstartu.op_pmstashthr.op_pmstashpv : NULL)
428 # if defined (DEBUGGING) && defined(__GNUC__) && !defined(PERL_GCC_BRACE_GROUPS_FORBIDDEN)
429 # define PmopSTASHPV_set(o,pv) ({ \
430 assert((o)->op_pmflags & PMf_ONCE); \
431 ((o)->op_pmstashstartu.op_pmstashthr.op_pmstashpv = savesharedpv(pv)); \
434 # define PmopSTASHPV_set(o,pv) \
435 ((o)->op_pmstashstartu.op_pmstashthr.op_pmstashpv = savesharedpv(pv))
437 # define PmopSTASH_flags(o) ((o)->op_pmstashstartu.op_pmstashthr.op_pmstashflags)
438 # define PmopSTASH_flags_set(o,flags) ((o)->op_pmstashstartu.op_pmstashthr.op_pmstashflags = flags)
439 # define PmopSTASH(o) (PmopSTASHPV(o) \
440 ? gv_stashpv((o)->op_pmstashstartu.op_pmstashthr.op_pmstashpv, \
441 GV_ADD | PmopSTASH_flags(o)) : NULL)
442 # define PmopSTASH_set(o,hv) (PmopSTASHPV_set(o, (hv) ? HvNAME_get(hv) : NULL), \
443 PmopSTASH_flags_set(o, \
444 ((hv) && HvNAME_HEK(hv) && \
448 # define PmopSTASH_free(o) PerlMemShared_free(PmopSTASHPV(o))
451 # define PmopSTASH(o) \
452 (((o)->op_pmflags & PMf_ONCE) ? (o)->op_pmstashstartu.op_pmstash : NULL)
453 # if defined (DEBUGGING) && defined(__GNUC__) && !defined(PERL_GCC_BRACE_GROUPS_FORBIDDEN)
454 # define PmopSTASH_set(o,hv) ({ \
455 assert((o)->op_pmflags & PMf_ONCE); \
456 ((o)->op_pmstashstartu.op_pmstash = (hv)); \
459 # define PmopSTASH_set(o,hv) ((o)->op_pmstashstartu.op_pmstash = (hv))
461 # define PmopSTASHPV(o) (PmopSTASH(o) ? HvNAME_get(PmopSTASH(o)) : NULL)
462 /* op_pmstashstartu.op_pmstash is not refcounted */
463 # define PmopSTASHPV_set(o,pv) PmopSTASH_set((o), gv_stashpv(pv,GV_ADD))
464 /* Note that if this becomes non-empty, then S_forget_pmop in op.c will need
466 # define PmopSTASH_free(o)
493 #define cUNOPx(o) ((UNOP*)o)
494 #define cBINOPx(o) ((BINOP*)o)
495 #define cLISTOPx(o) ((LISTOP*)o)
496 #define cLOGOPx(o) ((LOGOP*)o)
497 #define cPMOPx(o) ((PMOP*)o)
498 #define cSVOPx(o) ((SVOP*)o)
499 #define cPADOPx(o) ((PADOP*)o)
500 #define cPVOPx(o) ((PVOP*)o)
501 #define cCOPx(o) ((COP*)o)
502 #define cLOOPx(o) ((LOOP*)o)
504 #define cUNOP cUNOPx(PL_op)
505 #define cBINOP cBINOPx(PL_op)
506 #define cLISTOP cLISTOPx(PL_op)
507 #define cLOGOP cLOGOPx(PL_op)
508 #define cPMOP cPMOPx(PL_op)
509 #define cSVOP cSVOPx(PL_op)
510 #define cPADOP cPADOPx(PL_op)
511 #define cPVOP cPVOPx(PL_op)
512 #define cCOP cCOPx(PL_op)
513 #define cLOOP cLOOPx(PL_op)
515 #define cUNOPo cUNOPx(o)
516 #define cBINOPo cBINOPx(o)
517 #define cLISTOPo cLISTOPx(o)
518 #define cLOGOPo cLOGOPx(o)
519 #define cPMOPo cPMOPx(o)
520 #define cSVOPo cSVOPx(o)
521 #define cPADOPo cPADOPx(o)
522 #define cPVOPo cPVOPx(o)
523 #define cCOPo cCOPx(o)
524 #define cLOOPo cLOOPx(o)
526 #define kUNOP cUNOPx(kid)
527 #define kBINOP cBINOPx(kid)
528 #define kLISTOP cLISTOPx(kid)
529 #define kLOGOP cLOGOPx(kid)
530 #define kPMOP cPMOPx(kid)
531 #define kSVOP cSVOPx(kid)
532 #define kPADOP cPADOPx(kid)
533 #define kPVOP cPVOPx(kid)
534 #define kCOP cCOPx(kid)
535 #define kLOOP cLOOPx(kid)
539 # define cGVOPx_gv(o) ((GV*)PAD_SVl(cPADOPx(o)->op_padix))
540 # define IS_PADGV(v) (v && SvTYPE(v) == SVt_PVGV && isGV_with_GP(v) \
542 # define IS_PADCONST(v) (v && SvREADONLY(v))
543 # define cSVOPx_sv(v) (cSVOPx(v)->op_sv \
544 ? cSVOPx(v)->op_sv : PAD_SVl((v)->op_targ))
545 # define cSVOPx_svp(v) (cSVOPx(v)->op_sv \
546 ? &cSVOPx(v)->op_sv : &PAD_SVl((v)->op_targ))
548 # define cGVOPx_gv(o) ((GV*)cSVOPx(o)->op_sv)
549 # define IS_PADGV(v) FALSE
550 # define IS_PADCONST(v) FALSE
551 # define cSVOPx_sv(v) (cSVOPx(v)->op_sv)
552 # define cSVOPx_svp(v) (&cSVOPx(v)->op_sv)
555 #define cGVOP_gv cGVOPx_gv(PL_op)
556 #define cGVOPo_gv cGVOPx_gv(o)
557 #define kGVOP_gv cGVOPx_gv(kid)
558 #define cSVOP_sv cSVOPx_sv(PL_op)
559 #define cSVOPo_sv cSVOPx_sv(o)
560 #define kSVOP_sv cSVOPx_sv(kid)
563 # define Nullop ((OP*)NULL)
566 /* Lowest byte of PL_opargs */
568 #define OA_FOLDCONST 2
569 #define OA_RETSCALAR 4
571 #define OA_TARGLEX 16
572 #define OA_OTHERINT 32
573 #define OA_DANGEROUS 64
576 /* The next 4 bits encode op class information */
579 #define OA_CLASS_MASK (15 << OCSHIFT)
581 #define OA_BASEOP (0 << OCSHIFT)
582 #define OA_UNOP (1 << OCSHIFT)
583 #define OA_BINOP (2 << OCSHIFT)
584 #define OA_LOGOP (3 << OCSHIFT)
585 #define OA_LISTOP (4 << OCSHIFT)
586 #define OA_PMOP (5 << OCSHIFT)
587 #define OA_SVOP (6 << OCSHIFT)
588 #define OA_PADOP (7 << OCSHIFT)
589 #define OA_PVOP_OR_SVOP (8 << OCSHIFT)
590 #define OA_LOOP (9 << OCSHIFT)
591 #define OA_COP (10 << OCSHIFT)
592 #define OA_BASEOP_OR_UNOP (11 << OCSHIFT)
593 #define OA_FILESTATOP (12 << OCSHIFT)
594 #define OA_LOOPEXOP (13 << OCSHIFT)
598 /* Remaining nybbles of PL_opargs */
605 #define OA_SCALARREF 7
606 #define OA_OPTIONAL 8
608 /* Op_REFCNT is a reference count at the head of each op tree: needed
609 * since the tree is shared between threads, and between cloned closure
610 * copies in the same thread. OP_REFCNT_LOCK/UNLOCK is used when modifying
612 * The same mutex is used to protect the refcounts of the reg_trie_data
613 * and reg_ac_data structures, which are shared between duplicated
618 # define OP_REFCNT_INIT MUTEX_INIT(&PL_op_mutex)
620 # define OP_REFCNT_LOCK MUTEX_LOCK(&PL_op_mutex)
621 # define OP_REFCNT_UNLOCK MUTEX_UNLOCK(&PL_op_mutex)
623 # define OP_REFCNT_LOCK op_refcnt_lock()
624 # define OP_REFCNT_UNLOCK op_refcnt_unlock()
626 # define OP_REFCNT_TERM MUTEX_DESTROY(&PL_op_mutex)
628 # define OP_REFCNT_INIT NOOP
629 # define OP_REFCNT_LOCK NOOP
630 # define OP_REFCNT_UNLOCK NOOP
631 # define OP_REFCNT_TERM NOOP
634 #define OpREFCNT_set(o,n) ((o)->op_targ = (n))
635 #ifdef PERL_DEBUG_READONLY_OPS
636 # define OpREFCNT_inc(o) Perl_op_refcnt_inc(aTHX_ o)
637 # define OpREFCNT_dec(o) Perl_op_refcnt_dec(aTHX_ o)
639 # define OpREFCNT_inc(o) ((o) ? (++(o)->op_targ, (o)) : NULL)
640 # define OpREFCNT_dec(o) (--(o)->op_targ)
643 /* flags used by Perl_load_module() */
644 #define PERL_LOADMOD_DENY 0x1 /* no Module */
645 #define PERL_LOADMOD_NOIMPORT 0x2 /* use Module () */
646 #define PERL_LOADMOD_IMPORT_OPS 0x4 /* use Module (...) */
648 #if defined(PERL_IN_PERLY_C) || defined(PERL_IN_OP_C)
649 #define ref(o, type) doref(o, type, TRUE)
653 =head1 Optree Manipulation Functions
655 =for apidoc Am|OP*|LINKLIST|OP *o
656 Given the root of an optree, link the tree in execution order using the
657 C<op_next> pointers and return the first op executed. If this has
658 already been done, it will not be redone, and C<< o->op_next >> will be
659 returned. If C<< o->op_next >> is not already set, I<o> should be at
665 #define LINKLIST(o) ((o)->op_next ? (o)->op_next : op_linklist((OP*)o))
667 /* no longer used anywhere in core */
669 #define cv_ckproto(cv, gv, p) \
670 cv_ckproto_len_flags((cv), (gv), (p), (p) ? strlen(p) : 0, 0)
674 # define my(o) my_attrs((o), NULL)
677 #ifdef USE_REENTRANT_API
681 #if defined(PL_OP_SLAB_ALLOC)
682 #define NewOp(m,var,c,type) \
683 (var = (type *) Perl_Slab_Alloc(aTHX_ c*sizeof(type)))
684 #define NewOpSz(m,var,size) \
685 (var = (OP *) Perl_Slab_Alloc(aTHX_ size))
686 #define FreeOp(p) Perl_Slab_Free(aTHX_ p)
688 #define NewOp(m, var, c, type) \
689 (var = (MEM_WRAP_CHECK_(c,type) \
690 (type*)PerlMemShared_calloc(c, sizeof(type))))
691 #define NewOpSz(m, var, size) \
692 (var = (OP*)PerlMemShared_calloc(1, size))
693 #define FreeOp(p) PerlMemShared_free(p)
698 void (*bhk_start) (pTHX_ int full);
699 void (*bhk_pre_end) (pTHX_ OP **seq);
700 void (*bhk_post_end) (pTHX_ OP **seq);
701 void (*bhk_eval) (pTHX_ OP *const saveop);
705 =head1 Compile-time scope hooks
707 =for apidoc mx|U32|BhkFLAGS|BHK *hk
708 Return the BHK's flags.
710 =for apidoc mx|void *|BhkENTRY|BHK *hk|which
711 Return an entry from the BHK structure. I<which> is a preprocessor token
712 indicating which entry to return. If the appropriate flag is not set
713 this will return NULL. The type of the return value depends on which
716 =for apidoc Amx|void|BhkENTRY_set|BHK *hk|which|void *ptr
717 Set an entry in the BHK structure, and set the flags to indicate it is
718 valid. I<which> is a preprocessing token indicating which entry to set.
719 The type of I<ptr> depends on the entry.
721 =for apidoc Amx|void|BhkDISABLE|BHK *hk|which
722 Temporarily disable an entry in this BHK structure, by clearing the
723 appropriate flag. I<which> is a preprocessor token indicating which
726 =for apidoc Amx|void|BhkENABLE|BHK *hk|which
727 Re-enable an entry in this BHK structure, by setting the appropriate
728 flag. I<which> is a preprocessor token indicating which entry to enable.
729 This will assert (under -DDEBUGGING) if the entry doesn't contain a valid
732 =for apidoc mx|void|CALL_BLOCK_HOOKS|which|arg
733 Call all the registered block hooks for type I<which>. I<which> is a
734 preprocessing token; the type of I<arg> depends on I<which>.
739 #define BhkFLAGS(hk) ((hk)->bhk_flags)
741 #define BHKf_bhk_start 0x01
742 #define BHKf_bhk_pre_end 0x02
743 #define BHKf_bhk_post_end 0x04
744 #define BHKf_bhk_eval 0x08
746 #define BhkENTRY(hk, which) \
747 ((BhkFLAGS(hk) & BHKf_ ## which) ? ((hk)->which) : NULL)
749 #define BhkENABLE(hk, which) \
751 BhkFLAGS(hk) |= BHKf_ ## which; \
752 assert(BhkENTRY(hk, which)); \
755 #define BhkDISABLE(hk, which) \
757 BhkFLAGS(hk) &= ~(BHKf_ ## which); \
760 #define BhkENTRY_set(hk, which, ptr) \
763 BhkENABLE(hk, which); \
766 #define CALL_BLOCK_HOOKS(which, arg) \
768 if (PL_blockhooks) { \
770 for (i = av_len(PL_blockhooks); i >= 0; i--) { \
771 SV *sv = AvARRAY(PL_blockhooks)[i]; \
776 hk = INT2PTR(BHK *, SvUVX(sv)); \
778 hk = INT2PTR(BHK *, SvIVX(sv)); \
780 if (BhkENTRY(hk, which)) \
781 BhkENTRY(hk, which)(aTHX_ arg); \
786 /* flags for rv2cv_op_cv */
788 #define RV2CVOPCV_MARK_EARLY 0x00000001
789 #define RV2CVOPCV_RETURN_NAME_GV 0x00000002
791 #define op_lvalue(op,t) Perl_op_lvalue_flags(aTHX_ op,t,0)
793 /* flags for op_lvalue_flags */
795 #define OP_LVALUE_NO_CROAK 1
798 =head1 Custom Operators
800 =for apidoc Am|U32|XopFLAGS|XOP *xop
801 Return the XOP's flags.
803 =for apidoc Am||XopENTRY|XOP *xop|which
804 Return a member of the XOP structure. I<which> is a cpp token indicating
805 which entry to return. If the member is not set this will return a
806 default value. The return type depends on I<which>.
808 =for apidoc Am|void|XopENTRY_set|XOP *xop|which|value
809 Set a member of the XOP structure. I<which> is a cpp token indicating
810 which entry to set. See L<perlguts/"Custom Operators"> for details about
811 the available members and how they are used.
813 =for apidoc Am|void|XopDISABLE|XOP *xop|which
814 Temporarily disable a member of the XOP, by clearing the appropriate flag.
816 =for apidoc Am|void|XopENABLE|XOP *xop|which
817 Reenable a member of the XOP which has been disabled.
824 const char *xop_name;
825 const char *xop_desc;
827 void (*xop_peep)(pTHX_ OP *o, OP *oldop);
830 #define XopFLAGS(xop) ((xop)->xop_flags)
832 #define XOPf_xop_name 0x01
833 #define XOPf_xop_desc 0x02
834 #define XOPf_xop_class 0x04
835 #define XOPf_xop_peep 0x08
837 #define XOPd_xop_name PL_op_name[OP_CUSTOM]
838 #define XOPd_xop_desc PL_op_desc[OP_CUSTOM]
839 #define XOPd_xop_class OA_BASEOP
840 #define XOPd_xop_peep ((Perl_cpeep_t)0)
842 #define XopENTRY_set(xop, which, to) \
844 (xop)->which = (to); \
845 (xop)->xop_flags |= XOPf_ ## which; \
848 #define XopENTRY(xop, which) \
849 ((XopFLAGS(xop) & XOPf_ ## which) ? (xop)->which : XOPd_ ## which)
851 #define XopDISABLE(xop, which) ((xop)->xop_flags &= ~XOPf_ ## which)
852 #define XopENABLE(xop, which) \
854 (xop)->xop_flags |= XOPf_ ## which; \
855 assert(XopENTRY(xop, which)); \
859 =head1 Optree Manipulation Functions
861 =for apidoc Am|const char *|OP_NAME|OP *o
862 Return the name of the provided OP. For core ops this looks up the name
863 from the op_type; for custom ops from the op_ppaddr.
865 =for apidoc Am|const char *|OP_DESC|OP *o
866 Return a short description of the provided OP.
868 =for apidoc Am|U32|OP_CLASS|OP *o
869 Return the class of the provided OP: that is, which of the *OP
870 structures it uses. For core ops this currently gets the information out
871 of PL_opargs, which does not always accurately reflect the type used.
872 For custom ops the type is returned from the registration, and it is up
873 to the registree to ensure it is accurate. The value returned will be
874 one of the OA_* constants from op.h.
879 #define OP_NAME(o) ((o)->op_type == OP_CUSTOM \
880 ? XopENTRY(Perl_custom_op_xop(aTHX_ o), xop_name) \
881 : PL_op_name[(o)->op_type])
882 #define OP_DESC(o) ((o)->op_type == OP_CUSTOM \
883 ? XopENTRY(Perl_custom_op_xop(aTHX_ o), xop_desc) \
884 : PL_op_desc[(o)->op_type])
885 #define OP_CLASS(o) ((o)->op_type == OP_CUSTOM \
886 ? XopENTRY(Perl_custom_op_xop(aTHX_ o), xop_class) \
887 : (PL_opargs[(o)->op_type] & OA_CLASS_MASK))
889 #define newSUB(f, o, p, b) Perl_newATTRSUB(aTHX_ (f), (o), (p), NULL, (b))
901 /* short mad_count; */
914 * Values that can be held by mad_key :
915 * ^ unfilled head spot
917 * ; literal ; (blank if implicit ; at end of block)
918 * : literal : from ?: or attr list
920 * ? literal ? from ?:
930 * ! use is source filtered
932 * # whitespace/comment following ; or }
934 * 1 1st ; from for(;;)
936 * 2 2nd ; from for(;;)
939 * a sub or var attributes
940 * a non-method arrow operator
941 * A method arrow operator
944 * B retired stub block
945 * C constant conditional op
948 * e unreached "else" (see C)
949 * e expression producing E
951 * f folded constant op
952 * F peg op for format
953 * g op was forced to be a word
954 * i if/unless modifier
955 * I if/elsif/unless statement
958 * l last index of array ($#foo)
960 * m modifier on regex
961 * n sub or format name
962 * o current operator/declarator name
964 * O generic optimized op
965 * p peg to hold extra whitespace at statement level
966 * P peg op for package declaration
971 * r expression producing R
974 * S use import stub (no import)
975 * S retired sort block
976 * t unreached "then" (see C)
978 * v private sv of for loop
980 * w while/until modifier
981 * W while/for statement
984 * _ whitespace/comments preceding anything else
990 * c-indentation-style: bsd
992 * indent-tabs-mode: t
995 * ex: set ts=8 sts=4 sw=4 noet: