2 # Makefile to build perl on Windows using DMAKE.
4 # Microsoft Visual C++ 6.0 or later
5 # MinGW with gcc-3.4.5 or later
6 # Windows SDK 64-bit compiler and tools
8 # This is set up to build a perl.exe that runs off a shared library
9 # (perl521.dll). Also makes individual DLLs for the XS extensions.
13 ## Make sure you read README.win32 *before* you mess with anything here!
17 # Import everything from the environment like NMAKE does.
22 ## Build configuration. Edit the values below to suit your needs.
26 # Set these to wherever you want "dmake install" to put your
30 INST_TOP *= $(INST_DRV)\perl
33 # Uncomment if you want to build a 32-bit Perl using a 32-bit compiler
34 # on a 64-bit version of Windows.
39 # Comment this out if you DON'T want your perl installation to be versioned.
40 # This means that the new installation will overwrite any files from the
41 # old installation at the same INST_TOP location. Leaving it enabled is
42 # the safest route, as perl adds the extra version directory to all the
43 # locations it installs files to. If you disable it, an alternative
44 # versioned installation can be obtained by setting INST_TOP above to a
45 # path that includes an arbitrary version string.
50 # Comment this out if you DON'T want your perl installation to have
51 # architecture specific components. This means that architecture-
52 # specific files will be installed along with the architecture-neutral
53 # files. Leaving it enabled is safer and more flexible, in case you
54 # want to build multiple flavors of perl and install them together in
55 # the same location. Commenting it out gives you a simpler
56 # installation that is easier to understand for beginners.
58 #INST_ARCH *= \$(ARCHNAME)
61 # Uncomment this if you want perl to run
62 # $Config{sitelibexp}\sitecustomize.pl
63 # before anything else. This script can then be set up, for example,
64 # to add additional entries to @INC.
66 #USE_SITECUST *= define
69 # uncomment to enable multiple interpreters. This is needed for fork()
70 # emulation and for thread support, and is auto-enabled by USE_IMP_SYS
71 # and USE_ITHREADS below.
76 # Interpreter cloning/threads; now reasonably complete.
77 # This should be enabled to get the fork() emulation. This needs (and
78 # will auto-enable) USE_MULTI above.
80 USE_ITHREADS *= define
83 # uncomment to enable the implicit "host" layer for all system calls
84 # made by perl. This is also needed to get fork(). This needs (and
85 # will auto-enable) USE_MULTI above.
90 # Comment this out if you don't want to enable large file support for
91 # some reason. Should normally only be changed to maintain compatibility
92 # with an older release of perl.
94 USE_LARGE_FILES *= define
97 # Uncomment this if you're building a 32-bit perl and want 64-bit integers.
98 # (If you're building a 64-bit perl then you will have 64-bit integers whether
99 # or not this is uncommented.)
100 # Note: This option is not supported in 32-bit MSVC60 builds.
102 #USE_64_BIT_INT *= define
105 # Uncomment this if you want to support the use of long doubles in GCC builds.
106 # This option is not supported for MSVC builds.
108 #USE_LONG_DOUBLE *=define
111 # uncomment exactly one of the following
113 # Visual C++ 6.x (aka Visual C++ 98)
115 # Visual C++ .NET 2002/2003 (aka Visual C++ 7.x) (full version)
117 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
118 #CCTYPE *= MSVC70FREE
119 # Windows Server 2003 SP1 Platform SDK (April 2005)
121 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
123 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
124 #CCTYPE *= MSVC80FREE
125 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
127 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
128 #CCTYPE *= MSVC90FREE
129 # Visual C++ 2010 (aka Visual C++ 10.x) (full version)
131 # Visual C++ 2010 Express Edition (aka Visual C++ 10.x) (free version)
132 #CCTYPE = MSVC100FREE
133 # Visual C++ 2012 (aka Visual C++ 11.x) (full version)
135 # Visual C++ 2012 Express Edition (aka Visual C++ 11.x) (free version)
136 #CCTYPE = MSVC110FREE
137 # Visual C++ 2013 (aka Visual C++ 12.x) (full version)
139 # Visual C++ 2013 Express Edition (aka Visual C++ 12.x) (free version)
140 #CCTYPE = MSVC120FREE
141 # MinGW or mingw-w64 with gcc-3.4.5 or later
145 # If you are using GCC, 4.3 or later by default we add the -fwrapv option.
146 # See https://rt.perl.org/Ticket/Display.html?id=121505
151 # If you are using Intel C++ Compiler uncomment this
156 # Uncomment this if you want to build everything in C++ mode
158 #USE_CPLUSPLUS *= define
161 # uncomment next line if you want debug version of perl (big/slow)
162 # If not enabled, we automatically try to use maximum optimization
163 # with all compilers that are known to have a working optimizer.
165 # You can also set CFG = DebugSymbols for a slightly smaller/faster
166 # debug build without the special debugging code in perl which is
167 # enabled via -DDEBUGGING;
169 # or you can set CFG = DebugFull for an even fuller (bigger/slower)
170 # debug build using the debug version of the CRT, and enabling VC++
171 # debug features such as extra assertions and invalid parameter warnings
172 # in perl and CRT code via -D_DEBUG. (Note that the invalid parameter
173 # handler does get triggered from time to time in this configuration,
174 # which causes warnings to be printed on STDERR, which in turn causes a
175 # few tests to fail.) (This configuration is only available for VC++ builds.)
180 # uncomment to enable linking with setargv.obj under the Visual C
181 # compiler. Setting this options enables perl to expand wildcards in
182 # arguments, but it may be harder to use alternate methods like
183 # File::DosGlob that are more powerful. This option is supported only with
186 #USE_SETARGV *= define
189 # set this if you wish to use perl's malloc
190 # WARNING: Turning this on/off WILL break binary compatibility with extensions
191 # you may have compiled with/without it. Be prepared to recompile all
192 # extensions if you change the default. Currently, this cannot be enabled
193 # if you ask for USE_IMP_SYS above.
195 #PERL_MALLOC *= define
198 # set this to enable debugging mstats
199 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
200 # be enabled without PERL_MALLOC as well.
202 #DEBUG_MSTATS *= define
205 # set this to additionally provide a statically linked perl-static.exe.
206 # Note that dynamic loading will not work with this perl, so you must
207 # include required modules statically using the STATIC_EXT or ALL_STATIC
208 # variables below. A static library perl521s.lib will also be created.
209 # Ordinary perl.exe is not affected by this option.
211 #BUILD_STATIC *= define
214 # in addition to BUILD_STATIC the option ALL_STATIC makes *every*
215 # extension get statically built
216 # This will result in a very large perl executable, but the main purpose
217 # is to have proper linking set so as to be able to create miscellaneous
218 # executables with different built-in extensions
220 #ALL_STATIC *= define
223 # set the install locations of the compiler include/libraries
224 # Running VCVARS32.BAT is *required* when using Visual C.
225 # Some versions of Visual C don't define MSVCDIR in the environment,
226 # so you may have to set CCHOME explicitly (spaces in the path name should
229 .IF "$(CCTYPE)" == "GCC"
236 # uncomment this if you are using x86_64-w64-mingw32 cross-compiler
237 # ie if your gcc executable is called 'x86_64-w64-mingw32-gcc'
238 # instead of the usual 'gcc'.
243 # Following sets $Config{incpath} and $Config{libpth}
246 .IF "$(GCCCROSS)" == "define"
247 CCINCDIR *= $(CCHOME)\x86_64-w64-mingw32\include
248 CCLIBDIR *= $(CCHOME)\x86_64-w64-mingw32\lib
249 CCDLLDIR *= $(CCLIBDIR)
251 CCINCDIR *= $(CCHOME)\include
252 CCLIBDIR *= $(CCHOME)\lib
253 CCDLLDIR *= $(CCHOME)\bin
257 # Additional compiler flags can be specified here.
259 BUILDOPT *= $(BUILDOPTEXTRA)
262 # This should normally be disabled. Enabling it will disable the File::Glob
263 # implementation of CORE::glob.
265 #BUILDOPT += -DPERL_EXTERNAL_GLOB
268 # Perl needs to read scripts in text mode so that the DATA filehandle
269 # works correctly with seek() and tell(), or around auto-flushes of
270 # all filehandles (e.g. by system(), backticks, fork(), etc).
272 # The current version on the ByteLoader module on CPAN however only
273 # works if scripts are read in binary mode. But before you disable text
274 # mode script reading (and break some DATA filehandle functionality)
275 # please check first if an updated ByteLoader isn't available on CPAN.
277 BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
280 # specify semicolon-separated list of extra directories that modules will
281 # look for libraries (spaces in path names need not be quoted)
286 # set this to point to cmd.exe (only needed if you use some
287 # alternate shell that doesn't grok cmd.exe style commands)
289 #SHELL *= g:\winnt\system32\cmd.exe
292 # set this to your email address (perl will guess a value from
293 # from your loginname and your hostname, which may not be right)
298 ## Build configuration ends.
301 ##################### CHANGE THESE ONLY IF YOU MUST #####################
304 DEBUG_MSTATS *= undef
306 USE_SITECUST *= undef
308 USE_ITHREADS *= undef
310 USE_LARGE_FILES *= undef
311 USE_64_BIT_INT *= undef
312 USE_LONG_DOUBLE *= undef
314 .IF "$(USE_IMP_SYS)" == "define"
318 .IF "$(PERL_MALLOC)" == "undef"
322 .IF "$(DEBUG_MSTATS)" == "define"
323 BUILDOPT += -DPERL_DEBUGGING_MSTATS
326 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
330 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
334 .IF "$(USE_SITECUST)" == "define"
335 BUILDOPT += -DUSE_SITECUSTOMIZE
338 .IF "$(USE_MULTI)" != "undef"
339 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
342 .IF "$(USE_IMP_SYS)" != "undef"
343 BUILDOPT += -DPERL_IMPLICIT_SYS
346 PROCESSOR_ARCHITECTURE *= x86
349 # When we are running from a 32bit cmd.exe on AMD64 then
350 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
352 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
353 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
355 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
362 .IF "$(WIN64)" == "define"
363 USE_64_BIT_INT = define
366 # Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because
367 # both link against MSVCRT.dll (which is part of Windows itself) and
368 # not against a compiler specific versioned runtime.
369 .IF "$(WIN64)" == "define" && "$(CCTYPE)" == "MSVC60"
373 # Disable the 64-bit-int option for (32-bit) MSVC60 builds since that compiler
374 # does not support it.
375 .IF "$(CCTYPE)" == "MSVC60"
376 USE_64_BIT_INT != undef
379 # Disable the long double option for MSVC builds since that compiler
380 # does not support it.
381 .IF "$(CCTYPE)" != "GCC"
382 USE_LONG_DOUBLE != undef
385 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
386 .IF "$(ARCHITECTURE)" == "AMD64"
389 .IF "$(ARCHITECTURE)" == "IA64"
393 .IF "$(USE_MULTI)" == "define"
394 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
396 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
399 .IF "$(USE_ITHREADS)" == "define"
400 ARCHNAME !:= $(ARCHNAME)-thread
403 .IF "$(WIN64)" != "define"
404 .IF "$(USE_64_BIT_INT)" == "define"
405 ARCHNAME !:= $(ARCHNAME)-64int
409 .IF "$(USE_LONG_DOUBLE)" == "define"
410 ARCHNAME !:= $(ARCHNAME)-ld
413 ARCHDIR = ..\lib\$(ARCHNAME)
414 COREDIR = ..\lib\CORE
415 AUTODIR = ..\lib\auto
424 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
425 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
426 INST_LIB = $(INST_TOP)$(INST_VER)\lib
427 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
428 INST_COREDIR = $(INST_ARCHLIB)\CORE
429 INST_HTML = $(INST_TOP)$(INST_VER)\html
432 # Programs to compile, build .lib files and link
439 .IF "$(CCTYPE)" == "GCC"
441 .IF "$(GCCCROSS)" == "define"
442 ARCHPREFIX = x86_64-w64-mingw32-
445 CC = $(ARCHPREFIX)gcc
446 LINK32 = $(ARCHPREFIX)g++
447 LIB32 = $(ARCHPREFIX)ar rc
448 IMPLIB = $(ARCHPREFIX)dlltool
449 RSC = $(ARCHPREFIX)windres
451 .IF "$(USE_LONG_DOUBLE)" == "define"
452 BUILDOPT += -D__USE_MINGW_ANSI_STDIO
453 MINIBUILDOPT += -D__USE_MINGW_ANSI_STDIO
456 GCCWRAPV *= $(shell for /f "delims=. tokens=1,2,3" %i in ('$(CC) -dumpversion') do @if "%i"=="4" (if "%j" geq "3" echo define) else if "%i" geq "5" (echo define))
458 .IF "$(GCCWRAPV)" == "define"
460 MINIBUILDOPT += -fwrapv
471 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
473 .IF "$(WIN64)" == "define"
474 DEFINES += -DWIN64 -DCONSERVATIVE
476 LOCDEFS = -DPERLDLL -DPERL_CORE
480 # Current releases of MinGW 5.1.4 (as of 11-Aug-2009) will fail to link
481 # correctly if -lmsvcrt is specified explicitly.
487 -lmoldname -lkernel32 -luser32 -lgdi32 \
488 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
489 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
490 -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
492 .IF "$(CFG)" == "Debug"
493 OPTIMIZE = -g -O2 -DDEBUGGING
495 .ELIF "$(CFG)" == "DebugSymbols"
504 .IF "$(USE_CPLUSPLUS)" == "define"
505 EXTRACFLAGS += $(CXX_FLAG)
507 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
508 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
513 BUILDOPT += -fno-strict-aliasing -mms-bitfields
517 # All but the free version of VC++ 7.x can load DLLs on demand. Makes the test
518 # suite run in about 10% less time.
519 .IF "$(CCTYPE)" != "MSVC70FREE"
520 DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib
523 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
524 # DLLs. These either need copying everywhere with the binaries, or else need
525 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
526 # simplicity, embed them if they exist (and delete them afterwards so that they
527 # don't get installed too).
528 EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
529 if exist $@.manifest del $@.manifest
530 EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
531 if exist $@.manifest del $@.manifest
533 # Most relevant compiler-specific options fall into two groups:
534 # either pre-MSVC80 or MSVC80 onwards, so define a macro for this.
535 .IF "$(CCTYPE)" == "MSVC60" || \
536 "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC70FREE"
542 .IF "$(__ICC)" != "define"
549 LIB32 = $(LINK32) -lib
556 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
557 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
558 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT
559 LOCDEFS = -DPERLDLL -DPERL_CORE
565 .IF "$(CFG)" == "Debug"
566 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
568 .ELIF "$(CFG)" == "DebugSymbols"
569 OPTIMIZE = -Od -MD -Zi
571 .ELIF "$(CFG)" == "DebugFull"
573 OPTIMIZE = -Od -MDd -Zi -D_DEBUG -DDEBUGGING
576 # -O1 yields smaller code, which turns out to be faster than -O2 on x86 and x64
577 OPTIMIZE = -O1 -MD -Zi -DNDEBUG
578 # we enable debug symbols in release builds also
579 LINK_DBG = -debug -opt:ref,icf
580 # you may want to enable this if you want COFF symbols in the executables
581 # in addition to the PDB symbols. The default Dr. Watson that ships with
582 # Windows can use the the former but not latter. The free WinDbg can be
583 # installed to get better stack traces from just the PDB symbols, so we
584 # avoid the bloat of COFF symbols by default.
585 #LINK_DBG = $(LINK_DBG) -debugtype:both
586 .IF "$(CCTYPE)" != "MSVC60"
587 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
594 .IF "$(WIN64)" == "define"
595 DEFINES += -DWIN64 -DCONSERVATIVE
596 OPTIMIZE += -fp:precise
599 # For now, silence warnings from VC++ 8.x onwards about "unsafe" CRT functions
600 # and POSIX CRT function names being deprecated.
601 .IF "$(PREMSVC80)" == "undef"
602 DEFINES += -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
605 # In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to
606 # 64-bit, even in 32-bit mode. It also provides the _USE_32BIT_TIME_T
607 # preprocessor option to revert back to the old functionality for
608 # backward compatibility. We define this symbol here for older 32-bit
609 # compilers only (which aren't using it at all) for the sole purpose
610 # of getting it into $Config{ccflags}. That way if someone builds
611 # Perl itself with e.g. VC6 but later installs an XS module using VC8
612 # the time_t types will still be compatible.
613 .IF "$(WIN64)" == "undef"
614 .IF "$(PREMSVC80)" == "define"
615 BUILDOPT += -D_USE_32BIT_TIME_T
620 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
621 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
622 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
623 version.lib odbc32.lib odbccp32.lib comctl32.lib
625 # Avoid __intel_new_proc_init link error for libircmt.
626 # libmmd is /MD equivelent, other variants exist.
627 # libmmd is Intel C's math addon funcs to MS CRT, contains long doubles, C99,
628 # and optimized C89 funcs
629 .IF "$(__ICC)" == "define"
630 LIBBASEFILES += libircmt.lib libmmd.lib
633 # The 64 bit Windows Server 2003 SP1 SDK compilers link against MSVCRT.dll, which
634 # doesn't include the buffer overrun verification code used by the /GS switch.
635 # Since the code links against libraries that are compiled with /GS, this
636 # "security cookie verification" code must be included via bufferoverflow.lib.
637 .IF "$(WIN64)" == "define" && "$(CCTYPE)" == "SDK2003SP1"
638 LIBBASEFILES += bufferoverflowU.lib
641 LIBFILES = $(LIBBASEFILES) $(LIBC)
643 EXTRACFLAGS = -nologo -GF -W3
644 .IF "$(__ICC)" == "define"
645 EXTRACFLAGS += -Qstd=c99
647 .IF "$(USE_CPLUSPLUS)" == "define"
648 EXTRACFLAGS += $(CXX_FLAG)
650 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
651 $(PCHFLAGS) $(OPTIMIZE)
652 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
653 -libpath:"$(INST_COREDIR)" \
654 -machine:$(PROCESSOR_ARCHITECTURE)
655 LIB_FLAGS = $(LIB_FLAGS) -nologo
662 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
664 .IF "$(PREMSVC80)" == "undef"
665 LINK_FLAGS += "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'"
667 RSC_FLAGS = -DINCLUDE_MANIFEST
671 # used to allow local linking flags that are not propogated into Config.pm,
675 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
677 #################### do not edit below this line #######################
678 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
680 # Some old dmakes (including Sarathy's one at
681 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip)
682 # don't support logical OR (||) or logical AND (&&) in conditional
683 # expressions and hence don't process this makefile correctly. Determine
684 # whether this is the case so that we can give the user an error message.
701 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
704 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
707 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
713 .IF "$(CCTYPE)" == "GCC"
714 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
715 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
717 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
718 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
723 .IF "$(CCTYPE)" == "GCC"
724 $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -D INCLUDE_MANIFEST -i $< -o $@
726 $(RSC) -i.. -DINCLUDE_MANIFEST $<
731 MINIPERL = ..\miniperl.exe
733 PERLEXE = ..\perl.exe
734 WPERLEXE = ..\wperl.exe
735 PERLEXESTATIC = ..\perl-static.exe
736 STATICDIR = .\static.tmp
737 GLOBEXE = ..\perlglob.exe
738 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
739 GENUUDMAP = ..\generate_uudmap.exe
740 .IF "$(BUILD_STATIC)" == "define" || "$(ALL_STATIC)" == "define"
746 # Unicode data files generated by mktables
747 UNIDATAFILES = ..\lib\unicore\Decomposition.pl ..\lib\unicore\TestProp.pl \
748 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
749 ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm \
750 ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst
752 # Directories of Unicode data files generated by mktables
753 UNIDATADIR1 = ..\lib\unicore\To
754 UNIDATADIR2 = ..\lib\unicore\lib
756 PERLEXE_MANIFEST= .\perlexe.manifest
757 PERLEXE_ICO = .\perlexe.ico
758 PERLEXE_RES = .\perlexe.res
761 # Nominate a target which causes extensions to be re-built
762 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
763 # on and really only the interface - i.e. the .def file used to export symbols
765 PERLDEP = perldll.def
768 PL2BAT = bin\pl2bat.pl
792 ..\utils\zipdetails \
802 .IF "$(CCTYPE)" == "GCC"
804 CFGSH_TMPL = config.gc
805 CFGH_TMPL = config_H.gc
806 PERLIMPLIB = ..\libperl521$(a)
807 PERLSTATICLIB = ..\libperl521s$(a)
812 CFGSH_TMPL = config.vc
813 CFGH_TMPL = config_H.vc
818 # makedef.pl must be updated if this changes, and this should normally
819 # only change when there is an incompatible revision of the public API.
820 PERLIMPLIB *= ..\perl521$(a)
821 PERLSTATICLIB *= ..\perl521s$(a)
822 PERLDLL = ..\perl521.dll
824 XCOPY = xcopy /f /r /i /d /y
825 RCOPY = xcopy /f /r /i /e /d /y
867 EXTRACORE_SRC += perllib.c
869 .IF "$(PERL_MALLOC)" == "define"
870 EXTRACORE_SRC += ..\malloc.c
873 EXTRACORE_SRC += ..\perlio.c
919 .\include\sys\errno2.h \
920 .\include\sys\socket.h \
923 CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
925 UUDMAP_H = ..\uudmap.h
926 BITCOUNT_H = ..\bitcount.h
927 MG_DATA_H = ..\mg_data.h
928 GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H)
930 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
931 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
932 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
933 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
934 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
935 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
936 DLL_OBJ = $(DYNALOADER)
937 GENUUDMAP_OBJ = $(GENUUDMAP:db:+$(o))
939 PERLDLL_OBJ = $(CORE_OBJ)
940 PERLEXE_OBJ = perlmain$(o)
941 PERLEXEST_OBJ = perlmainst$(o)
943 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
945 .IF "$(USE_SETARGV)" != ""
946 SETARGV_OBJ = setargv$(o)
949 .IF "$(ALL_STATIC)" == "define"
950 # some exclusions, unfortunately, until fixed:
951 # - MakeMaker isn't capable enough for SDBM_File (small bug)
952 STATIC_EXT = * !SDBM_File
954 # specify static extensions here, for example:
955 # (be sure to include Win32CORE to load Win32 on demand)
956 #STATIC_EXT = Win32CORE Cwd Compress/Raw/Zlib
957 STATIC_EXT = Win32CORE
960 DYNALOADER = ..\DynaLoader$(o)
962 # vars must be separated by "\t+~\t+", since we're using the tempfile
963 # version of config_sh.pl (we were overflowing someone's buffer by
964 # trying to fit them all on the command line)
967 INST_TOP=$(INST_TOP) ~ \
968 INST_VER=$(INST_VER) ~ \
969 INST_ARCH=$(INST_ARCH) ~ \
970 archname=$(ARCHNAME) ~ \
973 ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
974 usecplusplus=$(USE_CPLUSPLUS) ~ \
975 cf_email=$(EMAIL) ~ \
976 d_mymalloc=$(PERL_MALLOC) ~ \
977 libs=$(LIBFILES:f) ~ \
978 incpath=$(CCINCDIR) ~ \
979 libperl=$(PERLIMPLIB:f) ~ \
980 libpth=$(CCLIBDIR);$(EXTRALIBDIRS) ~ \
987 static_ext=$(STATIC_EXT) ~ \
988 usethreads=$(USE_ITHREADS) ~ \
989 useithreads=$(USE_ITHREADS) ~ \
990 usemultiplicity=$(USE_MULTI) ~ \
991 use64bitint=$(USE_64_BIT_INT) ~ \
992 uselongdouble=$(USE_LONG_DOUBLE) ~ \
993 uselargefiles=$(USE_LARGE_FILES) ~ \
994 usesitecustomize=$(USE_SITECUST) ~ \
995 LINK_FLAGS=$(LINK_FLAGS) ~ \
996 optimize=$(OPTIMIZE) ~ \
997 ARCHPREFIX=$(ARCHPREFIX) ~ \
1004 all : CHECKDMAKE .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \
1005 $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
1006 $(PERLEXE) Extensions Extensions_nonxs $(PERLSTATIC)
1008 regnodes : ..\regnodes.h
1010 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
1012 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
1014 reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \
1015 $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
1018 static: $(PERLEXESTATIC)
1020 #----------------------------------------------------------------
1023 .IF "$(NEWDMAKE)" == "define"
1026 @echo Your dmake doesn't support ^|^| or ^&^& in conditional expressions.
1027 @echo Please get the latest dmake from http://search.cpan.org/dist/dmake/
1031 $(GLOBEXE) : perlglob$(o)
1032 .IF "$(CCTYPE)" == "GCC"
1033 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
1035 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
1036 perlglob$(o) setargv$(o)
1040 perlglob$(o) : perlglob.c
1042 config.w32 : $(CFGSH_TMPL)
1043 copy $(CFGSH_TMPL) config.w32
1046 # Copy the template config.h and set configurables at the end of it
1047 # as per the options chosen and compiler used.
1048 # Note: This config.h is only used to build miniperl.exe anyway, but
1049 # it's as well to have its options correct to be sure that it builds
1050 # and so that it's "-V" options are correct for use by makedef.pl. The
1051 # real config.h used to build perl.exe is generated from the top-level
1052 # config_h.SH by config_h.PL (run by miniperl.exe).
1054 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
1056 copy $(CFGH_TMPL) config.h
1058 @echo #ifndef _config_h_footer_>>$@
1059 @echo #define _config_h_footer_>>$@
1060 @echo #undef Off_t>>$@
1061 @echo #undef LSEEKSIZE>>$@
1062 @echo #undef Off_t_size>>$@
1063 @echo #undef PTRSIZE>>$@
1064 @echo #undef SSize_t>>$@
1065 @echo #undef HAS_ATOLL>>$@
1066 @echo #undef HAS_STRTOLL>>$@
1067 @echo #undef HAS_STRTOULL>>$@
1068 @echo #undef Size_t_size>>$@
1069 @echo #undef IVTYPE>>$@
1070 @echo #undef UVTYPE>>$@
1071 @echo #undef IVSIZE>>$@
1072 @echo #undef UVSIZE>>$@
1073 @echo #undef NV_PRESERVES_UV>>$@
1074 @echo #undef NV_PRESERVES_UV_BITS>>$@
1075 @echo #undef IVdf>>$@
1076 @echo #undef UVuf>>$@
1077 @echo #undef UVof>>$@
1078 @echo #undef UVxf>>$@
1079 @echo #undef UVXf>>$@
1080 @echo #undef USE_64_BIT_INT>>$@
1081 @echo #undef Gconvert>>$@
1082 @echo #undef HAS_FREXPL>>$@
1083 @echo #undef HAS_ISNANL>>$@
1084 @echo #undef HAS_MODFL>>$@
1085 @echo #undef HAS_MODFL_PROTO>>$@
1086 @echo #undef HAS_SQRTL>>$@
1087 @echo #undef HAS_STRTOLD>>$@
1088 @echo #undef PERL_PRIfldbl>>$@
1089 @echo #undef PERL_PRIgldbl>>$@
1090 @echo #undef PERL_PRIeldbl>>$@
1091 @echo #undef PERL_SCNfldbl>>$@
1092 @echo #undef NVTYPE>>$@
1093 @echo #undef NVSIZE>>$@
1094 @echo #undef LONG_DOUBLESIZE>>$@
1095 @echo #undef NV_OVERFLOWS_INTEGERS_AT>>$@
1096 @echo #undef NVef>>$@
1097 @echo #undef NVff>>$@
1098 @echo #undef NVgf>>$@
1099 @echo #undef USE_LONG_DOUBLE>>$@
1100 @echo #undef USE_CPLUSPLUS>>$@
1101 .IF "$(USE_LARGE_FILES)"=="define"
1102 @echo #define Off_t $(INT64)>>$@
1103 @echo #define LSEEKSIZE ^8>>$@
1104 @echo #define Off_t_size ^8>>$@
1106 @echo #define Off_t long>>$@
1107 @echo #define LSEEKSIZE ^4>>$@
1108 @echo #define Off_t_size ^4>>$@
1110 .IF "$(WIN64)"=="define"
1111 @echo #define PTRSIZE ^8>>$@
1112 @echo #define SSize_t $(INT64)>>$@
1113 @echo #define HAS_ATOLL>>$@
1114 @echo #define HAS_STRTOLL>>$@
1115 @echo #define HAS_STRTOULL>>$@
1116 @echo #define Size_t_size ^8>>$@
1118 @echo #define PTRSIZE ^4>>$@
1119 @echo #define SSize_t int>>$@
1120 @echo #undef HAS_ATOLL>>$@
1121 @echo #undef HAS_STRTOLL>>$@
1122 @echo #undef HAS_STRTOULL>>$@
1123 @echo #define Size_t_size ^4>>$@
1125 .IF "$(USE_64_BIT_INT)"=="define"
1126 @echo #define IVTYPE $(INT64)>>$@
1127 @echo #define UVTYPE unsigned $(INT64)>>$@
1128 @echo #define IVSIZE ^8>>$@
1129 @echo #define UVSIZE ^8>>$@
1130 .IF "$(USE_LONG_DOUBLE)"=="define"
1131 @echo #define NV_PRESERVES_UV>>$@
1132 @echo #define NV_PRESERVES_UV_BITS 64>>$@
1134 @echo #undef NV_PRESERVES_UV>>$@
1135 @echo #define NV_PRESERVES_UV_BITS 53>>$@
1137 @echo #define IVdf "I64d">>$@
1138 @echo #define UVuf "I64u">>$@
1139 @echo #define UVof "I64o">>$@
1140 @echo #define UVxf "I64x">>$@
1141 @echo #define UVXf "I64X">>$@
1142 @echo #define USE_64_BIT_INT>>$@
1144 @echo #define IVTYPE long>>$@
1145 @echo #define UVTYPE unsigned long>>$@
1146 @echo #define IVSIZE ^4>>$@
1147 @echo #define UVSIZE ^4>>$@
1148 @echo #define NV_PRESERVES_UV>>$@
1149 @echo #define NV_PRESERVES_UV_BITS 32>>$@
1150 @echo #define IVdf "ld">>$@
1151 @echo #define UVuf "lu">>$@
1152 @echo #define UVof "lo">>$@
1153 @echo #define UVxf "lx">>$@
1154 @echo #define UVXf "lX">>$@
1155 @echo #undef USE_64_BIT_INT>>$@
1157 .IF "$(USE_LONG_DOUBLE)"=="define"
1158 @echo #define Gconvert(x,n,t,b) sprintf((b),"%.*""Lg",(n),(x))>>$@
1159 @echo #define HAS_FREXPL>>$@
1160 @echo #define HAS_ISNANL>>$@
1161 @echo #define HAS_MODFL>>$@
1162 @echo #define HAS_MODFL_PROTO>>$@
1163 @echo #define HAS_SQRTL>>$@
1164 @echo #define HAS_STRTOLD>>$@
1165 @echo #define PERL_PRIfldbl "Lf">>$@
1166 @echo #define PERL_PRIgldbl "Lg">>$@
1167 @echo #define PERL_PRIeldbl "Le">>$@
1168 @echo #define PERL_SCNfldbl "Lf">>$@
1169 @echo #define NVTYPE long double>>$@
1170 .IF "$(WIN64)"=="define"
1171 @echo #define NVSIZE ^16>>$@
1172 @echo #define LONG_DOUBLESIZE ^16>>$@
1174 @echo #define NVSIZE ^12>>$@
1175 @echo #define LONG_DOUBLESIZE ^12>>$@
1177 @echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0>>$@
1178 @echo #define NVef "Le">>$@
1179 @echo #define NVff "Lf">>$@
1180 @echo #define NVgf "Lg">>$@
1181 @echo #define USE_LONG_DOUBLE>>$@
1183 @echo #define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))>>$@
1184 @echo #undef HAS_FREXPL>>$@
1185 @echo #undef HAS_ISNANL>>$@
1186 @echo #undef HAS_MODFL>>$@
1187 @echo #undef HAS_MODFL_PROTO>>$@
1188 @echo #undef HAS_SQRTL>>$@
1189 @echo #undef HAS_STRTOLD>>$@
1190 @echo #undef PERL_PRIfldbl>>$@
1191 @echo #undef PERL_PRIgldbl>>$@
1192 @echo #undef PERL_PRIeldbl>>$@
1193 @echo #undef PERL_SCNfldbl>>$@
1194 @echo #define NVTYPE double>>$@
1195 @echo #define NVSIZE ^8>>$@
1196 @echo #define LONG_DOUBLESIZE ^8>>$@
1197 @echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0>>$@
1198 @echo #define NVef "e">>$@
1199 @echo #define NVff "f">>$@
1200 @echo #define NVgf "g">>$@
1201 @echo #undef USE_LONG_DOUBLE>>$@
1203 .IF "$(USE_CPLUSPLUS)"=="define"
1204 @echo #define USE_CPLUSPLUS>>$@
1206 @echo #undef USE_CPLUSPLUS>>$@
1210 ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
1211 cd .. && miniperl -Ilib make_patchnum.pl
1213 # make sure that we recompile perl.c if the git version changes
1214 ..\perl$(o) : ..\git_version.h
1216 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1217 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1218 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1220 # This target is for when changes to the main config.sh happen.
1221 # Edit config.gc, then make perl using GCC in a minimal configuration (i.e.
1222 # with MULTI, ITHREADS, IMP_SYS and LARGE_FILES off), then make
1223 # this target to regenerate config_H.gc.
1225 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1226 $(CFGSH_TMPL) > ..\config.sh
1227 $(MINIPERL) -I..\lib ..\configpm --chdir=..
1228 -del /f $(CFGH_TMPL)
1229 -$(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)"
1230 rename config.h $(CFGH_TMPL)
1232 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL
1233 $(MINIPERL) -I..\lib ..\configpm --chdir=..
1234 $(XCOPY) ..\*.h $(COREDIR)\*.*
1235 $(XCOPY) *.h $(COREDIR)\*.*
1236 $(RCOPY) include $(COREDIR)\*.*
1237 $(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)" \
1238 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1240 # See the comment in Makefile.SH explaining this seemingly cranky ordering
1241 $(MINIPERL) : ..\lib\buildcustomize.pl
1243 ..\lib\buildcustomize.pl : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS) ..\write_buildcustomize.pl
1244 .IF "$(CCTYPE)" == "GCC"
1245 $(LINK32) -v -mconsole -o $(MINIPERL) $(BLINK_FLAGS) \
1246 $(mktmp $(LKPRE) $(MINI_OBJ) $(LIBFILES) $(LKPOST))
1248 $(LINK32) -subsystem:console -out:$(MINIPERL) $(BLINK_FLAGS) \
1249 @$(mktmp $(DELAYLOAD) $(LIBFILES) $(MINI_OBJ))
1250 $(EMBED_EXE_MANI:s/$@/$(MINIPERL)/)
1252 $(MINIPERL) -I..\lib -f ..\write_buildcustomize.pl ..
1255 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1257 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1258 $(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*B).c
1260 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1261 $(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(*B).c
1263 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1264 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1265 # unless the .IF is true), so instead we use a .ELSE with the default.
1266 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1268 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1269 .IF "$(USE_IMP_SYS)" == "define"
1270 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1272 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1275 # 1. we don't want to rebuild miniperl.exe when config.h changes
1276 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1277 # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
1278 $(MINI_OBJ) : $(CORE_NOCFG_H)
1280 $(WIN32_OBJ) : $(CORE_H)
1282 $(CORE_OBJ) : $(CORE_H)
1284 $(DLL_OBJ) : $(CORE_H)
1286 perldll.def : $(MINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibst_h.pl
1287 $(MINIPERL) -I..\lib create_perllibst_h.pl
1288 $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1289 $(BUILDOPT) CCTYPE=$(CCTYPE) TARG_DIR=..\ > perldll.def
1291 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1292 .IF "$(CCTYPE)" == "GCC"
1293 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1294 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1295 $(shell @type Extensions_static) \
1296 $(LIBFILES) $(LKPOST))
1297 $(IMPLIB) --output-lib $(PERLIMPLIB) \
1298 --dllname $(PERLDLL:b).dll \
1300 --base-file perl.base \
1301 --output-exp perl.exp
1302 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1303 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1304 $(shell @type Extensions_static) \
1305 $(LIBFILES) perl.exp $(LKPOST))
1307 $(LINK32) -dll -def:perldll.def -out:$@ $(BLINK_FLAGS) \
1308 @Extensions_static \
1309 @$(mktmp -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \
1310 $(PERLDLL_RES) $(PERLDLL_OBJ))
1313 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1315 $(PERLSTATICLIB): $(PERLDLL_OBJ) Extensions_static
1316 .IF "$(CCTYPE)" == "GCC"
1317 $(LIB32) $(LIB_FLAGS) $@ $(PERLDLL_OBJ)
1318 if exist $(STATICDIR) rmdir /s /q $(STATICDIR)
1319 for %i in ($(shell @type Extensions_static)) do \
1320 @mkdir $(STATICDIR) && cd $(STATICDIR) && \
1321 $(ARCHPREFIX)ar x ..\%i && \
1322 $(ARCHPREFIX)ar q ..\$@ *$(o) && \
1323 cd .. && rmdir /s /q $(STATICDIR)
1325 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \
1326 @$(mktmp $(PERLDLL_OBJ))
1328 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
1330 $(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
1332 $(MINIDIR)\globals$(o) : $(GENERATED_HEADERS)
1334 $(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H)
1336 $(BITCOUNT_H) : $(GENUUDMAP)
1337 $(GENUUDMAP) $(GENERATED_HEADERS)
1339 $(GENUUDMAP_OBJ) : ..\mg_raw.h
1341 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
1342 .IF "$(CCTYPE)" == "GCC"
1343 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1344 $(mktmp $(LKPRE) $(GENUUDMAP_OBJ) $(LIBFILES) $(LKPOST))
1346 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1347 @$(mktmp $(LIBFILES) $(GENUUDMAP_OBJ))
1351 perlmain.c : runperl.c
1352 copy runperl.c perlmain.c
1354 perlmain$(o) : perlmain.c
1355 $(CC) $(CFLAGS_O:s,-DPERLDLL,-UPERLDLL,) $(OBJOUT_FLAG)$@ -c perlmain.c
1357 perlmainst.c : runperl.c
1358 copy runperl.c perlmainst.c
1360 perlmainst$(o) : perlmainst.c
1361 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1363 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1364 .IF "$(CCTYPE)" == "GCC"
1365 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1366 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
1368 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1369 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES) $(SETARGV_OBJ)
1372 copy $(PERLEXE) $(WPERLEXE)
1373 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1375 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1376 .IF "$(CCTYPE)" == "GCC"
1377 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1378 $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES)
1380 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1381 $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES) $(SETARGV_OBJ)
1385 MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
1386 $(MINIPERL) -I..\lib ..\mkppport
1388 #-------------------------------------------------------------------------------
1389 # There's no direct way to mark a dependency on
1390 # DynaLoader.pm, so this will have to do
1391 Extensions : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1392 $(XCOPY) ..\*.h $(COREDIR)\*.*
1393 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
1395 Extensions_reonly : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1396 $(XCOPY) ..\*.h $(COREDIR)\*.*
1397 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
1399 Extensions_static : ..\make_ext.pl ..\lib\buildcustomize.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
1400 $(XCOPY) ..\*.h $(COREDIR)\*.*
1401 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
1402 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1404 Extensions_nonxs : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) ..\pod\perlfunc.pod
1405 $(XCOPY) ..\*.h $(COREDIR)\*.*
1406 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
1408 $(DYNALOADER) : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
1409 $(XCOPY) ..\*.h $(COREDIR)\*.*
1410 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
1413 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
1415 Extensions_realclean :
1416 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
1418 #-------------------------------------------------------------------------------
1421 doc: $(PERLEXE) ..\pod\perltoc.pod
1422 $(PERLEXE) ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1423 --podpath=pod:lib:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1426 ..\utils\Makefile: $(CONFIGPM) ..\utils\Makefile.PL
1427 $(MINIPERL) -I..\lib ..\utils\Makefile.PL ..
1429 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1430 # so please check that script before making structural changes here
1431 utils: $(PERLEXE) ..\utils\Makefile
1432 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1433 copy ..\README.aix ..\pod\perlaix.pod
1434 copy ..\README.amiga ..\pod\perlamiga.pod
1435 copy ..\README.android ..\pod\perlandroid.pod
1436 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1437 copy ..\README.ce ..\pod\perlce.pod
1438 copy ..\README.cn ..\pod\perlcn.pod
1439 copy ..\README.cygwin ..\pod\perlcygwin.pod
1440 copy ..\README.dos ..\pod\perldos.pod
1441 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1442 copy ..\README.haiku ..\pod\perlhaiku.pod
1443 copy ..\README.hpux ..\pod\perlhpux.pod
1444 copy ..\README.hurd ..\pod\perlhurd.pod
1445 copy ..\README.irix ..\pod\perlirix.pod
1446 copy ..\README.jp ..\pod\perljp.pod
1447 copy ..\README.ko ..\pod\perlko.pod
1448 copy ..\README.linux ..\pod\perllinux.pod
1449 copy ..\README.macos ..\pod\perlmacos.pod
1450 copy ..\README.macosx ..\pod\perlmacosx.pod
1451 copy ..\README.netware ..\pod\perlnetware.pod
1452 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1453 copy ..\README.os2 ..\pod\perlos2.pod
1454 copy ..\README.os390 ..\pod\perlos390.pod
1455 copy ..\README.os400 ..\pod\perlos400.pod
1456 copy ..\README.plan9 ..\pod\perlplan9.pod
1457 copy ..\README.qnx ..\pod\perlqnx.pod
1458 copy ..\README.riscos ..\pod\perlriscos.pod
1459 copy ..\README.solaris ..\pod\perlsolaris.pod
1460 copy ..\README.symbian ..\pod\perlsymbian.pod
1461 copy ..\README.synology ..\pod\perlsynology.pod
1462 copy ..\README.tru64 ..\pod\perltru64.pod
1463 copy ..\README.tw ..\pod\perltw.pod
1464 copy ..\README.vos ..\pod\perlvos.pod
1465 copy ..\README.win32 ..\pod\perlwin32.pod
1466 copy ..\pod\perldelta.pod ..\pod\perl52110delta.pod
1467 $(PERLEXE) $(PL2BAT) $(UTILS)
1468 $(MINIPERL) -I..\lib ..\autodoc.pl ..
1469 $(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q ..
1471 ..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
1472 $(PERLEXE) -f ..\pod\buildtoc -q
1474 # Note that the pod cleanup in this next section is parsed (and regenerated
1475 # by pod/buildtoc so please check that script before making changes here
1477 distclean: realclean
1478 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1479 $(PERLIMPLIB) ..\miniperl$(a) $(PERLEXESTATIC) $(PERLSTATICLIB)
1480 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1481 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1482 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1483 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1484 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1485 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1486 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1487 -del /f $(LIBDIR)\File\Glob.pm
1488 -del /f $(LIBDIR)\Storable.pm
1489 -del /f $(LIBDIR)\Sys\Hostname.pm
1490 -del /f $(LIBDIR)\Time\HiRes.pm
1491 -del /f $(LIBDIR)\Unicode\Normalize.pm
1492 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1493 -del /f $(LIBDIR)\Win32.pm
1494 -del /f $(LIBDIR)\Win32CORE.pm
1495 -del /f $(LIBDIR)\Win32API\File.pm
1496 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1497 -del /f $(LIBDIR)\buildcustomize.pl
1498 -del /f $(DISTDIR)\XSLoader\XSLoader.pm
1500 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1501 -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
1502 -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
1503 -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie
1504 -if exist $(LIBDIR)\Carp rmdir /s /q $(LIBDIR)\Carp
1505 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1506 -if exist $(LIBDIR)\Config\Perl rmdir /s /q $(LIBDIR)\Config\Perl
1507 -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN
1508 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1509 -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel
1510 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1511 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1512 -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding
1513 -if exist $(LIBDIR)\Exporter rmdir /s /q $(LIBDIR)\Exporter
1514 -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder
1515 -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command
1516 -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant
1517 -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist
1518 -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker
1519 -if exist $(LIBDIR)\ExtUtils\ParseXS rmdir /s /q $(LIBDIR)\ExtUtils\ParseXS
1520 -if exist $(LIBDIR)\ExtUtils\Typemaps rmdir /s /q $(LIBDIR)\ExtUtils\Typemaps
1521 -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec
1522 -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter
1523 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1524 -if exist $(LIBDIR)\HTTP rmdir /s /q $(LIBDIR)\HTTP
1525 -if exist $(LIBDIR)\I18N rmdir /s /q $(LIBDIR)\I18N
1526 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1527 -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC
1528 -if exist $(LIBDIR)\JSON rmdir /s /q $(LIBDIR)\JSON
1529 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1530 -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale
1531 -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math
1532 -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize
1533 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1534 -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
1535 -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
1536 -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
1537 -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
1538 -if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl
1539 -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO
1540 -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc
1541 -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple
1542 -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text
1543 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1544 -if exist $(LIBDIR)\Search rmdir /s /q $(LIBDIR)\Search
1545 -if exist $(LIBDIR)\Sub rmdir /s /q $(LIBDIR)\Sub
1546 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1547 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1548 -if exist $(LIBDIR)\Term rmdir /s /q $(LIBDIR)\Term
1549 -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
1550 -if exist $(LIBDIR)\Text rmdir /s /q $(LIBDIR)\Text
1551 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
1552 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1553 -if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash
1554 -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
1555 -if exist $(LIBDIR)\Unicode\Collate\Locale rmdir /s /q $(LIBDIR)\Unicode\Collate\Locale
1556 -if exist $(LIBDIR)\version rmdir /s /q $(LIBDIR)\version
1557 -if exist $(LIBDIR)\VMS rmdir /s /q $(LIBDIR)\VMS
1558 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1559 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1560 -cd $(PODDIR) && del /f *.html *.bat roffitall \
1561 perl52110delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
1562 perlapi.pod perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1563 perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
1564 perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
1565 perllinux.pod perlmacos.pod perlmacosx.pod perlmodlib.pod \
1566 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1567 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1568 perlsolaris.pod perlsymbian.pod perlsynology.pod perltoc.pod \
1569 perltru64.pod perltw.pod perluniprops.pod perlvos.pod \
1571 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1572 perldoc perlivp libnetcfg enc2xs encguess piconv cpan *.bat \
1573 xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep shasum corelist zipdetails
1574 -del /f ..\config.sh perlmain.c dlutils.c config.h.new \
1577 -del /f ..\lib\Config_git.pl
1580 -del /f $(PERLEXE_RES) perl.base
1581 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib ppport.h
1582 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1583 -cd $(DISTDIR) && del /s *.def Makefile Makefile.old
1584 -cd $(CPANDIR) && del /s *.def Makefile Makefile.old
1585 -del /s ..\utils\Makefile
1586 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1587 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1588 -if exist pod2htmd.tmp del pod2htmd.tmp
1589 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1590 -del /f ..\t\test_state
1592 install : all installbare installhtml
1594 installbare : utils ..\pod\perltoc.pod
1595 $(PERLEXE) ..\installperl
1596 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1597 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1598 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1599 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1600 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1603 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1605 inst_lib : $(CONFIGPM)
1606 $(RCOPY) ..\lib $(INST_LIB)\*.*
1608 $(UNIDATAFILES) ..\pod\perluniprops.pod .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
1609 cd ..\lib\unicore && \
1610 ..\$(MINIPERL) -I.. mktables -P ..\..\pod -maketest -makelist -p
1612 minitest : .\config.h $(MINIPERL) ..\git_version.h $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) $(TESTPREPGCC)
1613 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1614 if exist ..\t\perl.exe del /f ..\t\perl.exe
1615 rename ..\t\miniperl.exe perl.exe
1616 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1617 # Note this perl.exe is miniperl
1618 cd ..\t && perl.exe TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t opbasic/*.t op/*.t uni/*.t perf/*.t pragma/*.t
1620 test-prep : all utils ..\pod\perltoc.pod $(TESTPREPGCC)
1621 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1622 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1623 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1625 # If building with gcc versions 4.x.x or greater, then
1626 # the GCC helper DLL will also need copied to the test directory.
1627 # The name of the dll can change, depending upon which vendor has supplied
1628 # your compiler, and upon the values of "x".
1629 # libstdc++-6.dll is copied if it exists as it, too, may then be needed.
1630 # Without this copying, the op/taint.t test script will fail.
1632 .IF "$(CCTYPE)" == "GCC"
1633 TESTPREPGCC = test-prep-gcc
1635 if exist $(CCDLLDIR)\libgcc_s_seh-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_seh-1.dll ..\t\$(NULL)
1636 if exist $(CCDLLDIR)\libgcc_s_sjlj-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_sjlj-1.dll ..\t\$(NULL)
1637 if exist $(CCDLLDIR)\libgcc_s_dw2-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_dw2-1.dll ..\t\$(NULL)
1638 if exist $(CCDLLDIR)\libstdc++-6.dll $(XCOPY) $(CCDLLDIR)\libstdc++-6.dll ..\t\$(NULL)
1639 if exist $(CCDLLDIR)\libwinpthread-1.dll $(XCOPY) $(CCDLLDIR)\libwinpthread-1.dll ..\t\$(NULL)
1645 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1646 cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)
1648 test_porting : test-prep
1649 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1650 cd ..\t && perl.exe harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t
1652 test-reonly : reonly utils
1653 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1654 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1655 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1656 cd ..\t && perl.exe harness $(OPT) -re \bpat\\/ $(EXTRA)
1661 test-notty : test-prep
1662 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1663 set PERL_SKIP_TTY_TEST=1 && \
1664 cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)
1667 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1668 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1669 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1670 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1671 cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)
1674 -@erase miniperlmain$(o)
1676 -@erase perlglob$(o)
1677 -@erase perlmain$(o)
1678 -@erase perlmainst$(o)
1681 -@erase /f ..\git_version.h
1685 -@erase $(PERLEXESTATIC)
1686 -@erase $(PERLSTATICLIB)
1689 -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(GENERATED_HEADERS)
1690 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1691 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1692 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1693 -@erase $(UNIDATAFILES)
1694 -@erase $(WIN32_OBJ)
1696 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1697 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1700 -@erase Extensions_static
1704 clean : Extensions_clean _clean
1706 realclean : Extensions_realclean _clean
1708 # Handy way to run perlbug -ok without having to install and run the
1709 # installed perlbug. We don't re-run the tests here - we trust the user.
1710 # Please *don't* use this unless all tests pass.
1711 # If you want to report test failures, use "dmake nok" instead.
1713 $(PERLEXE) ..\utils\perlbug -ok -s "(UNINSTALLED)"
1716 $(PERLEXE) ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1719 $(PERLEXE) ..\utils\perlbug -nok -s "(UNINSTALLED)"
1722 $(PERLEXE) ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok