perldelta: Note that utf8_hop_safe is for XS code

[perl5.git] / pod / perldelta.pod

=encoding utf8

=head1 NAME

perldelta - what is new for perl v5.26.0

=head1 DESCRIPTION

This document describes the differences between the 5.24.0 release and the
5.26.0 release.

=head1 Notice

This release includes three updates with widespread effects:

=over 4

=item * C<.> no longer in C<@INC>

The current modules, and for the execution of scripts.  See the section
L<< Removal of the current directory (C<.>) from C<@INC> >> for the full details.

=item * C<do> may now warn

C<do> now gives a mandatory warning when it fails to load a file which it
would have loaded had C<.> been in C<@INC>.

=item * In regular expression patterns, a literal left brace C<"{">
should be escaped

See L</Unescaped literal C<"{"> characters in regular expression patterns are no longer permissible>.

=back

=head1 Core Enhancements

=head2 New regular expression modifier C</xx>

Specifying two C<x> characters to modify a regular expression pattern
does everything that a single one does, but additionally TAB and SPACE
characters within a bracketed character class are generally ignored and
can be added to improve readability, like
S<C</[ ^ A-Z d-f p-x ]/xx>>.  Details are at
L<perlre/E<sol>x and E<sol>xx>.

=head2 New Hash Function For 64-bit Builds

We have switched to a hybrid hash function to better balance
performance for short and long keys.

For short keys, 16 bytes and under, we use an optimised variant of
One At A Time Hard, and for longer keys we use Siphash 1-3.  For very
long keys this is a big improvement in performance.  For shorter keys
there is a modest improvement.

=head2 Indented Here-documents

This adds a new modifier '~' to here-docs that tells the parser
that it should look for /^\s*$DELIM\n/ as the closing delimiter.

These syntaxes are all supported:

    <<~EOF;
    <<~\EOF;
    <<~'EOF';
    <<~"EOF";
    <<~`EOF`;
    <<~ 'EOF';
    <<~ "EOF";
    <<~ `EOF`;

The '~' modifier will strip, from each line in the here-doc, the
same whitespace that appears before the delimiter.

Newlines will be copied as-is, and lines that don't include the
proper beginning whitespace will cause perl to croak.

For example:

    if (1) {
      print <<~EOF;
        Hello there
        EOF
    }

prints "Hello there\n" with no leading whitespace.

=head2 @{^CAPTURE}, %{^CAPTURE}, and %{^CAPTURE_ALL}

C<@{^CAPTURE}> exposes the capture buffers of the last match as an
array.  So C<$1> is C<${^CAPTURE}[0]>.  This is a more efficient equivalent
to code like C<substr($matched_string,$-[0],$+[0]-$-[0])>, and you don't
have to keep track of the C<$matched_string> either.  This variable has no
single character equivalent.  Note, like the other regex magic variables
the contents of this variable is dynamic, if you wish to store it beyond
the lifetime of the match you must copy it to another array.

C<%{^CAPTURE}> is the equivalent to C<%+> (I<i.e.>, named captures).  Other than
being more self documenting there is no difference between the two forms.

C<%{^CAPTURE_ALL}> is the equivalent to C<%-> (I<i.e.>, all named captures).
Other than being more self documenting there is no difference between the
two forms.

=head2 Unicode 9.0 is now supported

A list of changes is at L<http://www.unicode.org/versions/Unicode9.0.0/>.
Modules that are shipped with core Perl but not maintained by p5p do not
necessarily support Unicode 9.0.  L<Unicode::Normalize> does work on 9.0.

=head2 Use of C<\p{I<script>}> uses the improved Script_Extensions property

Unicode 6.0 introduced an improved form of the Script (C<sc>) property, and
called it Script_Extensions (C<scx>).  Perl now uses this improved
version when a property is specified as just C<\p{I<script>}>.  This
should make programs be more accurate when determining if a character is
used in a given script, but there is a slight chance of breakage for
programs that very specifically needed the old behavior.  The meaning of
compound forms, like C<\p{sc=I<script>}> are unchanged.  See
L<perlunicode/Scripts>.

=head2 Declaring a reference to a variable

As an experimental feature, Perl now allows the referencing operator to come
after L<C<my()>|perlfunc/my>, L<C<state()>|perlfunc/state>,
L<C<our()>|perlfunc/our>, or L<C<local()>|perlfunc/local>.  This syntax must
be enabled with C<use feature 'declared_refs'>.  It is experimental, and will
warn by default unless C<no warnings 'experimental::refaliasing'> is in effect.
It is intended mainly for use in assignments to references.  For example:

    use experimental 'refaliasing', 'declared_refs';
    my \$a = \$b;

See L<perlref/Assigning to References> for more details.

=head2 Perl can now do default collation in UTF-8 locales on platforms
that support it

Some platforms natively do a reasonable job of collating and sorting in
UTF-8 locales.  Perl now works with those.  For portability and full
control, L<Unicode::Collate> is still recommended, but now you may
not need to do anything special to get good-enough results, depending on
your application.  See
L<perllocale/Category C<LC_COLLATE>: Collation: Text Comparisons and Sorting>.

=head2 Better locale collation of strings containing embedded C<NUL>
characters

In locales that have multi-level character weights, C<NUL>s are now
ignored at the higher priority ones.  There are still some gotchas in
some strings, though.  See
L<perllocale/Collation of strings containing embedded C<NUL> characters>.

=head2 Lexical subroutines are no longer experimental

Using the C<lexical_subs> feature introduced in v5.18 no longer emits a warning.  Existing
code that disables the C<experimental::lexical_subs> warning category
that the feature previously used will continue to work.  The
C<lexical_subs> feature has no effect; all Perl code can use lexical
subroutines, regardless of what feature declarations are in scope.

=head2 C<CORE> subroutines for hash and array functions callable via
reference

The hash and array functions in the C<CORE> namespace--C<keys>, C<each>,
C<values>, C<push>, C<pop>, C<shift>, C<unshift> and C<splice>--, can now
be called with ampersand syntax (C<&CORE::keys(\%hash>) and via reference
(C<< my $k = \&CORE::keys; $k-E<gt>(\%hash) >>).  Previously they could only be
used when inlined.

=head2 for XS code, create a safer utf8_hop() called utf8_hop_safe()

Unlike utf8_hop(), utf8_hop_safe() won't navigate before the beginning or after
the end of the supplied buffer.

=head1 Security

=head2 Removal of the current directory (C<.>) from C<@INC>

The perl binary includes a default set of paths in C<@INC>.  Historically
it has also included the current directory (C<.>) as the final entry,
unless run with taint mode enabled (C<perl -T>).  While convenient, this has
security implications: for example, where a script attempts to load an
optional module when its current directory is untrusted (such as F</tmp>),
it could load and execute code from under that directory.

Starting with v5.26, C<.> is always removed by default, not just under
tainting.  This has major implications for installing modules and executing
scripts.

The following new features have been added to help ameliorate these
issues.

=over

=item * C<Configure -Udefault_inc_excludes_dot>

There is a new C<Configure> option, C<default_inc_excludes_dot> (enabled
by default) which builds a perl executable without C<.>; unsetting this
option using C<-U> reverts perl to the old behaviour.  This may fix your
path issues but will reintroduce all the security concerns, so don't
build a perl executable like this unless you're I<really> confident that
such issues are not a concern in your environment.

=item * C<PERL_USE_UNSAFE_INC>

There is a new environment variable recognised by the perl interpreter.
If this variable has the value C<1> when the perl interpreter starts up,
then C<.> will be automatically appended to C<@INC> (except under tainting).

This allows you restore the old perl interpreter behaviour on a
case-by-case basis.  But note that this is intended to be a temporary crutch,
and this feature will likely be removed in some future perl version.
It is currently set by the C<cpan> utility and C<Test::Harness> to
ease installation of CPAN modules which have not been updated to handle the
lack of dot.  Once again, don't use this unless you are sure that this
will not reintroduce any security concerns.

=item * A new mandatory warning issued by C<do>.

While it is well-known that C<use> and C<require> use C<@INC> to search
for the file to load, many people don't realise that C<do "file"> also
searches C<@INC> if the file is a relative path.  With the removal of C<.>,
a simple C<do "file.pl"> will fail to read in and execute C<file.pl> from
the current directory.  Since this is commonly expected behaviour, a new
mandatory warning is now issued whenever C<do> fails to load a file which
it otherwise would have found if dot had been in C<@INC>.

=back

Here are some things script and module authors may need to do to make
their software work in the new regime.

=over

=item * Script authors

If the issue is within your own code (rather than within included
modules), then you have two main options.  Firstly, if you are confident
that your script will only be run within a trusted directory (under which
you expect to find trusted files and modules), then add C<.> back into the
path; I<e.g.>:

    BEGIN {
        my $dir = "/some/trusted/directory";
        chdir $dir or die "Can't chdir to $dir: $!\n";
        # safe now
        push @INC, '.';
    }
    use "Foo::Bar"; # may load /some/trusted/directory/Foo/Bar.pm
    do "config.pl"; # may load /some/trusted/directory/config.pl

On the other hand, if your script is intended to be run from within
untrusted directories (such as F</tmp>), then your script suddenly failing
to load files may be indicative of a security issue.  You most likely want
to replace any relative paths with full paths; for example,

    do ".foo_config.pl"

might become

    do "$ENV{HOME}/.foo_config.pl"

If you are absolutely certain that you want your script to load and
execute a file from the current directory, then use a C<./> prefix; for
example:

    do "./.foo_config.pl"

=item * Installing and using CPAN modules

If you install a CPAN module using an automatic tool like C<cpan>, then
this tool will itself set the C<PERL_USE_UNSAFE_INC> environment variable
while building and testing the module, which may be sufficient to install
a distribution which hasn't been updated to be dot-aware.  If you want to
install such a module manually, then you'll need to replace the
traditional invocation:

    perl Makefile.PL && make && make test && make install

with something like

    (export PERL_USE_UNSAFE_INC=1; \
     perl Makefile.PL && make && make test && make install)

Note that this only helps build and install an unfixed module.  It's
possible for the tests to pass (since they were run under
C<PERL_USE_UNSAFE_INC=1>), but for the module itself to fail to perform
correctly in production.  In this case you may have to temporarily modify
your script until such time as a fixed version of the module is released.
For example:

    use Foo::Bar;
    {
        local @INC = (@INC, '.');
        # assuming read_config() needs '.' in @INC
        $config = Foo::Bar->read_config();
    }

This is only rarely expected to be necessary.  Again, if doing this,
assess the resultant risks first.

=item * Module Authors

If you maintain a CPAN distribution, it may need updating to run in
a dotless environment.  Although C<cpan> and other such tools will
currently set the C<PERL_USE_UNSAFE_INC> during module build, this is a
temporary workaround for the set of modules which rely on C<.> being in
C<@INC> for installation and testing, and this may mask deeper issues.  It
could result in a module which passes tests and installs, but which
fails at run time.

During build, test and install, it will normally be the case that any perl
processes will be executing directly within the root directory of the
untarred distribution, or a known subdirectory of that, such as F<t/>.  It
may well be that F<Makefile.PL> or F<t/foo.t> will attempt to include
local modules and configuration files using their direct relative
filenames, which will now fail.

However, as described above, automatic tools like F<cpan> will (for now)
set the C<PERL_USE_UNSAFE_INC> environment variable, which introduces
dot during build.

This makes it likely that your existing build and test code will work, but
this may mask issues with your code which only manifest when used after
install.  It is prudent to try and run your build process with that
variable explicitly disabled:

    (export PERL_USE_UNSAFE_INC=0; \
     perl Makefile.PL && make && make test && make install)

This is more likely to show up any potential problems with your module's
build process, or even with the module itself.  Fixing such issues will
ensure both that your module can again be installed manually, and that
it will still build once the C<PERL_USE_UNSAFE_INC> crutch goes away.

When fixing issues in tests due to the removal of dot from C<@INC>,
reinsertion of dot into C<@INC> should be performed with caution, for this
too may suppress real errors in your runtime code.  You are encouraged
wherever possible to apply the aforementioned approaches with explicit
absolute/relative paths, or to relocate your needed files into a
subdirectory and insert that subdirectory into C<@INC> instead.

If your runtime code has problems under the dotless C<@INC>, then the comments
above on how to fix for script authors will mostly apply here too.  Bear in
mind though that it is considered bad form for a module to globally add dot to
C<@INC>, since it introduces both a security risk and hides issues of
accidentally requiring dot in C<@INC>, as explained above.

=back

=head2 "Escaped" colons and relative paths in PATH

On Unix systems, Perl treats any relative paths in the PATH environment
variable as tainted when starting a new process.  Previously, it was
allowing a backslash to escape a colon (unlike the OS), consequently
allowing relative paths to be considered safe if the PATH was set to
something like C</\:.>.  The check has been fixed to treat C<.> as tainted
in that example.

=head2 C<-Di> switch is now required for PerlIO debugging output

Previously PerlIO debugging output would be sent to the file specified
by the C<PERLIO_DEBUG> environment variable if perl wasn't running
setuid and the C<-T> or C<-t> switches hadn't been parsed yet.

If perl performed output at a point where it hadn't yet parsed its
switches this could result in perl creating or overwriting the file
named by C<PERLIO_DEBUG> even when the C<-T> switch had been supplied.

Perl now requires the C<-Di> switch to produce PerlIO debugging
output.  By default this is written to C<stderr>, but can optionally
be redirected to a file by setting the C<PERLIO_DEBUG> environment
variable.

If perl is running setuid or the C<-T> switch has supplied
C<PERLIO_DEBUG> is ignored and the debugging output is sent to
C<stderr> as for any other C<-D> switch.

=head1 Incompatible Changes

=head2 Unescaped literal C<"{"> characters in regular expression
patterns are no longer permissible

You have to now say something like C<"\{"> or C<"[{]"> to specify to
match a LEFT CURLY BRACKET; otherwise it is a fatal pattern compilation
error.  This change will allow future extensions to the language.

These have been deprecated since v5.16, with a deprecation message
raised for some uses starting in v5.22.  Unfortunately, the code added
to raise the message was buggy, and failed to warn in some cases where
it should have.  Therefore, enforcement of this ban for these cases is
deferred until Perl 5.30, but the code has been fixed to raise a
default-on deprecation message for them in the meantime.

Some uses of literal C<"{"> occur in contexts where we do not foresee
the meaning ever being anything but the literal, such as the very first
character in the pattern, or after a C<"|"> meaning alternation.  Thus

 qr/{fee|{fie/

matches either of the strings C<{fee> or C<{fie>.  To avoid forcing
unnecessary code changes, these uses do not need to be escaped, and no
warning is raised about them, and there are no current plans to change this.

But it is always correct to escape C<"{">, and the simple rule to
remember is to always do so.

=head2 C<scalar(%hash)> return signature changed

The value returned for C<scalar(%hash)> will no longer show information about
the buckets allocated in the hash.  It will simply return the count of used
keys.  It is thus equivalent to C<0+keys(%hash)>.

A form of backwards compatibility is provided via
L<C<Hash::Util::bucket_ratio()>|Hash::Util/bucket_ratio> which provides
the same behavior as
C<scalar(%hash)> provided in Perl 5.24 and earlier.

=head2 C<keys> returned from an lvalue subroutine

C<keys> returned from an lvalue subroutine can no longer be assigned
to in list context.

    sub foo : lvalue { keys(%INC) }
    (foo) = 3; # death
    sub bar : lvalue { keys(@_) }
    (bar) = 3; # also an error

This makes the lvalue sub case consistent with C<(keys %hash) = ...> and
C<(keys @_) = ...>, which are also errors.  [perl #128187]

=head2 C<${^ENCODING}> has been removed

Consequently, the L<encoding> pragma's default mode is no longer supported.  If
you still need to write your source code in encodings other than UTF-8, use a
source filter such as L<Filter::Encoding> on CPAN or L<encoding>'s C<Filter>
option.

=head2 POSIX::tmpnam() has been removed

The fundamentally unsafe C<tmpnam()> interface was deprecated in
Perl 5.22 and has now been removed.  In its place you can use,
for example, the L<File::Temp> interfaces.

=head2 require ::Foo::Bar is now illegal.

Formerly, C<require ::Foo::Bar> would try to read F</Foo/Bar.pm>.  Now any
bareword require which starts with a double colon dies instead.

=head2 Literal control character variable names are no longer permissible

A variable name may no longer contain a literal control character under
any circumstances.  These previously were allowed in single-character
names on ASCII platforms, but have been deprecated there since Perl
5.20.  This affects things like C<$I<\cT>>, where I<\cT> is a literal
control (such as a C<NAK> or C<NEGATIVE ACKNOWLEDGE> character) in the
source code.

=head2 C<NBSP> is no longer permissible in C<\N{...}>

The name of a character may no longer contain non-breaking spaces.  It
has been deprecated to do so since Perl 5.22.

=head1 Deprecations

=head2 String delimiters that aren't stand-alone graphemes are now deprecated

In order for Perl to eventually allow string delimiters to be Unicode
grapheme clusters (which look like a single character, but may be
a sequence of several ones), we have to stop allowing a single character
delimiter that isn't a grapheme by itself.  These are unlikely to exist
in actual code, as they would typically display as attached to the
character in front of them.

=head1 Performance Enhancements

=over 4

=item *

A hash in boolean context is now sometimes faster, I<e.g.>

    if (!%h) { ... }

This was already special-cased, but some cases were missed, and even the
ones which weren't have been improved.

=item *

Several other ops may now also be faster in boolean context.

=item * New Faster Hash Function on 64 bit builds

We use a different hash function for short and long keys.  This should
improve performance and security, especially for long keys.

=item * readline is faster

Reading from a file line-by-line with C<readline()> or C<< E<lt>E<gt> >> should
now typically be faster due to a better implementation of the code that
searches for the next newline character.

=item *

Reduce cost of SvVALID().

=item *

C<$ref1 = $ref2> has been optimized.

=item *

Array and hash assignment are now faster, I<e.g.>

    (..., @a) = (...);
    (..., %h) = (...);

especially when the RHS is empty.

=item *

Reduce the number of odd special cases for the C<SvSCREAM> flag.

=item *

Avoid sv_catpvn() in do_vop() when unneeded.

=item *

Enhancements in Regex concat COW implementation.

=item *

Clearing hashes and arrays has been made slightly faster.  Now code
like this is around 5% faster:

    my @a;
    for my $i (1..3_000_000) {
        @a = (1,2,3);
        @a = ();
    }

and this code around 3% faster:

    my %h;
    for my $i (1..3_000_000) {
        %h = qw(a 1 b 2);
        %h = ();
    }

=item *

Better optimise array and hash assignment

=item *

Converting a single-digit string to a number is now substantially faster.

=item *

The internal op implementing the C<split> builtin has been simplified and
sped up.  Firstly, it no longer requires a subsidiary internal C<pushre> op
to do its work.  Secondly, code of the form C<my @x = split(...)> is now
optimised in the same way as C<@x = split(...)>, and is therefore a few
percent faster.

=item *

The rather slow implementation for the experimental subroutine signatures
feature has been made much faster; it is now comparable in speed with the
old-style C<my ($a, $b, @c) = @_>.

=item *

Bareword constant strings are now permitted to take part in constant
folding.  They were originally exempted from constant folding in August 1999,
during the development of Perl 5.6, to ensure that C<use strict "subs">
would still apply to bareword constants.  That has now been accomplished a
different way, so barewords, like other constants, now gain the performance
benefits of constant folding.

This also means that void-context warnings on constant expressions of
barewords now report the folded constant operand, rather than the operation;
this matches the behaviour for non-bareword constants.

=back

=head1 Modules and Pragmata

=head2 Updated Modules and Pragmata

=over 4

=item *

L<Archive::Tar> has been upgraded from version 2.04 to 2.24.

=item *

L<arybase> has been upgraded from version 0.11 to 0.12.

=item *

L<attributes> has been upgraded from version 0.27 to 0.29.

The deprecation message for the C<:unique> and C<:locked> attributes
now mention that they will disappear in Perl 5.28.

=item *

L<B> has been upgraded from version 1.62 to 1.68.

=item *

L<B::Concise> has been upgraded from version 0.996 to 0.999.

Its output is now more descriptive for C<op_private> flags.

=item *

L<B::Debug> has been upgraded from version 1.23 to 1.24.

=item *

L<B::Deparse> has been upgraded from version 1.37 to 1.40.

=item *

L<B::Xref> has been upgraded from version 1.05 to 1.06.

It now uses 3-arg C<open()> instead of 2-arg C<open()>. [perl #130122]

=item *

L<base> has been upgraded from version 2.23 to 2.25.

=item *

L<bignum> has been upgraded from version 0.42 to 0.47.

=item *

L<Carp> has been upgraded from version 1.40 to 1.42.

=item *

L<charnames> has been upgraded from version 1.43 to 1.44.

=item *

L<Compress::Raw::Bzip2> has been upgraded from version 2.069 to 2.074.

=item *

L<Compress::Raw::Zlib> has been upgraded from version 2.069 to 2.074.

=item *

L<Config::Perl::V> has been upgraded from version 0.25 to 0.28.

=item *

L<CPAN> has been upgraded from version 2.11 to 2.18.

=item *

L<CPAN::Meta> has been upgraded from version 2.150005 to 2.150010.

=item *

L<Data::Dumper> has been upgraded from version 2.160 to 2.167.

The XS implementation now supports Deparse.

This fixes a stack management bug. [perl #130487].

=item *

L<DB_File> has been upgraded from version 1.835 to 1.840.

=item *

L<Devel::Peek> has been upgraded from version 1.23 to 1.26.

=item *

L<Devel::PPPort> has been upgraded from version 3.32 to 3.35.

=item *

L<Devel::SelfStubber> has been upgraded from version 1.05 to 1.06.

It now uses 3-arg C<open()> instead of 2-arg C<open()>. [perl #130122]

=item *

L<diagnostics> has been upgraded from version 1.34 to 1.36.

It now uses 3-arg C<open()> instead of 2-arg C<open()>. [perl #130122]

=item *

L<Digest> has been upgraded from version 1.17 to 1.17_01.

=item *

L<Digest::MD5> has been upgraded from version 2.54 to 2.55.

=item *

L<Digest::SHA> has been upgraded from version 5.95 to 5.96.

=item *

L<DynaLoader> has been upgraded from version 1.38 to 1.42.

=item *

L<Encode> has been upgraded from version 2.80 to 2.88.

=item *

L<encoding> has been upgraded from version 2.17 to 2.19.

This module's default mode is no longer supported.  It now
dies when imported, unless the C<Filter> option is being used.

=item *

L<encoding::warnings> has been upgraded from version 0.12 to 0.13.

This module is no longer supported.  It emits a warning to
that effect and then does nothing.

=item *

L<Errno> has been upgraded from version 1.25 to 1.28.

Document that using C<%!> loads Errno for you.

It now uses 3-arg C<open()> instead of 2-arg C<open()>. [perl #130122]

=item *

L<ExtUtils::Embed> has been upgraded from version 1.33 to 1.34.

It now uses 3-arg C<open()> instead of 2-arg C<open()>. [perl #130122]

=item *

L<ExtUtils::MakeMaker> has been upgraded from version 7.10_01 to 7.24.

=item *

L<ExtUtils::Miniperl> has been upgraded from version 1.05 to 1.06.

=item *

L<ExtUtils::ParseXS> has been upgraded from version 3.31 to 3.34.

=item *

L<ExtUtils::Typemaps> has been upgraded from version 3.31 to 3.34.

=item *

L<feature> has been upgraded from version 1.42 to 1.47.

Fixes the Unicode Bug in the range operator.

=item *

L<File::Copy> has been upgraded from version 2.31 to 2.32.

=item *

L<File::Fetch> has been upgraded from version 0.48 to 0.52.

=item *

L<File::Glob> has been upgraded from version 1.26 to 1.28.

Issue a deprecation message for C<File::Glob::glob()>.

=item *

L<File::Spec> has been upgraded from version 3.63 to 3.67.

=item *

L<FileHandle> has been upgraded from version 2.02 to 2.03.

=item *

L<Filter::Simple> has been upgraded from version 0.92 to 0.93.

It no longer treats C<no MyFilter> immediately following C<use MyFilter> as
end-of-file.  [perl #107726]

=item *

L<Getopt::Long> has been upgraded from version 2.48 to 2.49.

=item *

L<Getopt::Std> has been upgraded from version 1.11 to 1.12.

=item *

L<Hash::Util> has been upgraded from version 0.19 to 0.22.

=item *

L<HTTP::Tiny> has been upgraded from version 0.056 to 0.070.

Internal 599-series errors now include the redirect history.

=item *

L<I18N::LangTags> has been upgraded from version 0.40 to 0.42.

It now uses 3-arg C<open()> instead of 2-arg C<open()>. [perl #130122]

=item *

L<IO> has been upgraded from version 1.36 to 1.38.

=item *

IO-Compress has been upgraded from version 2.069 to 2.074.

=item *

L<IO::Socket::IP> has been upgraded from version 0.37 to 0.38.

=item *

L<IPC::Cmd> has been upgraded from version 0.92 to 0.96.

=item *

L<IPC::SysV> has been upgraded from version 2.06_01 to 2.07.

=item *

L<JSON::PP> has been upgraded from version 2.27300 to 2.27400_02.

=item *

L<lib> has been upgraded from version 0.63 to 0.64.

It now uses 3-arg C<open()> instead of 2-arg C<open()>. [perl #130122]

=item *

L<List::Util> has been upgraded from version 1.42_02 to 1.46_02.

=item *

L<Locale::Codes> has been upgraded from version 3.37 to 3.42.

=item *

L<Locale::Maketext> has been upgraded from version 1.26 to 1.28.

=item *

L<Locale::Maketext::Simple> has been upgraded from version 0.21 to 0.21_01.

=item *

L<Math::BigInt> has been upgraded from version 1.999715 to 1.999806.

There have also been some core customizations.

=item *

L<Math::BigInt::FastCalc> has been upgraded from version 0.40 to 0.5005.

=item *

L<Math::BigRat> has been upgraded from version 0.260802 to 0.2611.

=item *

L<Math::Complex> has been upgraded from version 1.59 to 1.5901.

=item *

L<Memoize> has been upgraded from version 1.03 to 1.03_01.

=item *

L<Module::CoreList> has been upgraded from version 5.20170420 to 5.20170520.

=item *

L<Module::Load::Conditional> has been upgraded from version 0.64 to 0.68.

=item *

L<Module::Metadata> has been upgraded from version 1.000031 to 1.000033.

=item *

L<mro> has been upgraded from version 1.18 to 1.20.

=item *

L<Net::Ping> has been upgraded from version 2.43 to 2.55.

IPv6 addresses and C<AF_INET6> sockets are now supported, along with several
other enhancements.

Remove sudo from 500_ping_icmp.t.

Avoid stderr noise in tests

Check for echo in new L<Net::Ping> tests.

=item *

L<NEXT> has been upgraded from version 0.65 to 0.67.

=item *

L<Opcode> has been upgraded from version 1.34 to 1.39.

=item *

L<open> has been upgraded from version 1.10 to 1.11.

=item *

L<OS2::Process> has been upgraded from version 1.11 to 1.12.

It now uses 3-arg C<open()> instead of 2-arg C<open()>. [perl #130122]

=item *

L<overload> has been upgraded from version 1.26 to 1.28.

Its compilation speed has been improved slightly.

=item *

L<parent> has been upgraded from version 0.234 to 0.236.

=item *

L<perl5db.pl> has been upgraded from version 1.50 to 1.51.

Ignore F</dev/tty> on non-Unix systems. [perl #113960]

=item *

L<Perl::OSType> has been upgraded from version 1.009 to 1.010.

=item *

L<perlfaq> has been upgraded from version 5.021010 to 5.021011.

=item *

L<PerlIO> has been upgraded from version 1.09 to 1.10.

=item *

L<PerlIO::encoding> has been upgraded from version 0.24 to 0.25.

=item *

L<PerlIO::scalar> has been upgraded from version 0.24 to 0.26.

=item *

L<Pod::Checker> has been upgraded from version 1.60 to 1.73.

=item *

L<Pod::Functions> has been upgraded from version 1.10 to 1.11.

=item *

L<Pod::Html> has been upgraded from version 1.22 to 1.2202.

=item *

L<Pod::Perldoc> has been upgraded from version 3.25_02 to 3.28.

=item *

L<Pod::Simple> has been upgraded from version 3.32 to 3.35.

=item *

L<Pod::Usage> has been upgraded from version 1.68 to 1.69.

=item *

L<POSIX> has been upgraded from version 1.65 to 1.76.  This remedies several
defects in making its symbols exportable. [perl #127821]
The C<POSIX::tmpnam()> interface has been removed,
see L</"POSIX::tmpnam() has been removed">.
Trying to import POSIX subs that have no real implementations
(like C<POSIX::atend()>) now fails at import time, instead of
waiting until runtime.

=item *

L<re> has been upgraded from version 0.32 to 0.34

This adds support for the new L<C<E<47>xx>|perlre/E<sol>x and E<sol>xx>
regular expression pattern modifier, and a change to the L<S<C<use re
'strict'>>|re/'strict' mode> experimental feature.  When S<C<re
'strict'>> is enabled, a warning now will be generated for all
unescaped uses of the two characters C<}> and C<]> in regular
expression patterns (outside bracketed character classes) that are taken
literally.  This brings them more in line with the C<)> character which
is always a metacharacter unless escaped.  Being a metacharacter only
sometimes, depending on action at a distance, can lead to silently
having the pattern mean something quite different than was intended,
which the S<C<re 'strict'>> mode is intended to minimize.

=item *

L<Safe> has been upgraded from version 2.39 to 2.40.

=item *

L<Scalar::Util> has been upgraded from version 1.42_02 to 1.46_02.

=item *

L<Storable> has been upgraded from version 2.56 to 2.62.

Fixes [perl #130098].

=item *

L<Symbol> has been upgraded from version 1.07 to 1.08.

=item *

L<Sys::Syslog> has been upgraded from version 0.33 to 0.35.

=item *

L<Term::ANSIColor> has been upgraded from version 4.04 to 4.06.

=item *

L<Term::ReadLine> has been upgraded from version 1.15 to 1.16.

It now uses 3-arg C<open()> instead of 2-arg C<open()>. [perl #130122]

=item *

L<Test> has been upgraded from version 1.28 to 1.30.

It now uses 3-arg C<open()> instead of 2-arg C<open()>. [perl #130122]

=item *

L<Test::Harness> has been upgraded from version 3.36 to 3.38.

=item *

L<Test::Simple> has been upgraded from version 1.001014 to 1.302073.

=item *

L<Thread::Queue> has been upgraded from version 3.09 to 3.12.

=item *

L<Thread::Semaphore> has been upgraded from 2.12 to 2.13.

Added the C<down_timed> method.

=item *

L<threads> has been upgraded from version 2.07 to 2.15.

Compatibility with 5.8 has been restored.

Fixes [perl #130469].

=item *

L<threads::shared> has been upgraded from version 1.51 to 1.56.

This fixes [cpan #119529], [perl #130457]

=item *

L<Tie::Hash::NamedCapture> has been upgraded from version 0.09 to 0.10.

=item *

L<Time::HiRes> has been upgraded from version 1.9733 to 1.9741.

It now builds on systems with C++11 compilers (such as G++ 6 and Clang++
3.9).

Now uses C<clockid_t>.

=item *

L<Time::Local> has been upgraded from version 1.2300 to 1.25.

=item *

L<Unicode::Collate> has been upgraded from version 1.14 to 1.19.

=item *

L<Unicode::UCD> has been upgraded from version 0.64 to 0.68.

It now uses 3-arg C<open()> instead of 2-arg C<open()>. [perl #130122]

=item *

L<version> has been upgraded from version 0.9916 to 0.9917.

=item *

L<VMS::DCLsym> has been upgraded from version 1.06 to 1.08.

It now uses 3-arg C<open()> instead of 2-arg C<open()>. [perl #130122]

=item *

L<warnings> has been upgraded from version 1.36 to 1.37.

=item *

L<XS::Typemap> has been upgraded from version 0.14 to 0.15.

=item *

L<XSLoader> has been upgraded from version 0.21 to 0.27.

Fixed a security hole in which binary files could be loaded from a path
outside of L<C<@INC>|perlvar/@INC>.

It now uses 3-arg C<open()> instead of 2-arg C<open()>. [perl #130122]

=back

=head1 Documentation

=head2 New Documentation

=head3 L<perldeprecation>

This file documents all upcoming deprecations, and some of the deprecations
which already have been removed.  The purpose of this documentation is
two-fold: document what will disappear, and by which version, and serve
as a guide for people dealing with code which has features that no longer
work after an upgrade of their perl.

=head2 Changes to Existing Documentation

=head3 L<perlcall>

=over 4

=item *

Use of unassigned code point or non-standalone grapheme for a delimiter will be a fatal error starting in Perl 5.30

This was changed to drop a leading C<v> in C<v5.30>, so it uses the same
style as other deprecation messages.

=item *

"\c%c" is more clearly written simply as "%s".

It was decided to undeprecate the use of C<\c%c>, see L<http://www.nntp.perl.org/group/perl.perl5.porters/2017/02/msg242944.html>

=item *

Removed redundant C<dSP> from an example.

=back

=head3 L<perlcommunity>

=over 4

=item *

All references to Usenet have been removed.

=back

=head3 L<perldata>

=over 4

=item *

Updated documentation of C<scalar(%hash)>.  See L</scalar(%hash) return
signature changed> above.

=item *

Use of single character variables, with the variable name a non printable
character in the range C<\x80>-C<\xFF> is no longer allowed.  Update the docs to
reflect this.

=back

=head3 L<perldelta>

=over 4

=item *

All references to Usenet have been removed.

=back

=head3 L<perldiag>

=over 4

=item *

Deprecations are to be marked with a D.
C<"%s() is deprecated on :utf8 handles"> use a deprecation message, and as
such, such be marked C<"(D deprecated)"> and not C<"(W deprecated)">.

=back

=head3 L<perlexperiment>

=over 4

=item *

Documented new feature: See L</Declaring a reference to a variable> above.

=back

=head3 L<perlfunc>

=over 4

=item *

Defined on aggregates is no longer allowed.  Perlfunc was still reporting it as
deprecated, and that it will be deleted in the future.

=item *

Clarified documentation of L<C<seek()>|perlfunc/seek>,
L<C<tell()>|perlfunc/tell> and L<C<sysseek()>|perlfunc/sysseek>.
L<[perl #128607]|https://rt.perl.org/Public/Bug/Display.html?id=128607>

=item *

Removed obsolete documentation of L<C<study()>|perlfunc/study>.

=back

=head3 L<perlguts>

=over 4

=item *

Add C<pTHX_> to magic method examples.

=back

=head3 L<perlhack>

=over 4

=item *

Document Tab VS Space.

=back

=head3 L<perlinterp>

=over 4

=item *

L<perlinterp> has been expanded to give a more detailed example of how to
hunt around in the parser for how a given operator is handled.

=back

=head3 L<perllocale>

=over 4

=item *

Document C<NUL> collation handling.

=item *

Some locales aren't compatible with Perl.  Note the potential bad
consequences of using them.

=back

=head3 L<perlmodinstall>

=over 4

=item *

All references to Usenet have been removed.

=back

=head3 L<perlmodlib>

=over 4

=item *

Updated the mirror list.

=item *

All references to Usenet have been removed.

=back

=head3 L<perlnewmod>

=over 4

=item *

All references to Usenet have been removed.

=back

=head3 L<perlobj>

=over 4

=item *

Added a section on calling methods using their fully qualified names.

=item *

Do not discourage manual @ISA.

=back

=head3 L<perlootut>

=over 4

=item *

Tidy the document.

=item *

Mention C<Moo> more.

=back

=head3 L<perlop>

=over 4

=item *

Clarify behavior of single quote regexps.

=back

=head3 L<perlre>

=over 4

=item *

The first part was extensively rewritten to incorporate various basic
points, that in earlier versions were mentioned in sort of an appendix
on Version 8 regular expressions.

Several minor enhancements to the documentation.

=back

=head3 L<perlsec>

=over 4

=item *

Fixed link to Crosby paper on hash complexity attack.

=back

=head3 L<perlref>

=over 4

=item *

Documented new feature: See L</Declaring a reference to a variable> above.

=back

=head3 L<perltie>

=over 4

=item *

Updated documentation of C<scalar(%hash)>.  See L</scalar(%hash) return
signature changed> above.

=back

=head3 L<perlunicode>

=over 4

=item *

Documented change to C<\p{I<script>}> to now use the improved Script_Extensions
property.  See L</Use of \p{script} uses the improved Script_Extensions
property> above.

=item *

Updated the text to correspond with changes in Unicode UTS#18, concerning
regular expressions, and Perl compatibility with what it says.

=back

=head3 L<perlvar>

=over 4

=item *

Removed obsolete documentation of C<${^ENCODING}>.  See L</${^ENCODING} has
been removed> above.

=item *

Document C<@ISA>.  Was documented other places, not not in L<perlvar>.

=back

=head1 Diagnostics

=head2 New Diagnostics

=head3 New Errors

=over 4

=item *

Since C<.> is now removed from C<@INC> by default, C<do> will now trigger
a warning recommending to fix the C<do> statement:

L<do "%s" failed, '.' is no longer in @INC|perldiag/do "%s" failed, '.' is no longer in @INC; did you mean do ".E<sol>%s"?>

=item *

Using the empty pattern (which re-executes the last successfully-matched
pattern) inside a code block in another regex, as in C</(?{ s!!new! })/>, has
always previously yielded a segfault.  It now produces an error:
L<Infinite recursion in regex|perldiag/"Infinite recursion in regex">.

=item *

L<The experimental declared_refs feature is not enabled|perldiag/"The experimental declared_refs feature is not enabled">

(F) To declare references to variables, as in C<my \%x>, you must first enable
the feature:

    no warnings "experimental::declared_refs";
    use feature "declared_refs";

=item *

L<Version control conflict marker|perldiag/"Version control conflict marker">

(F) The parser found a line starting with C<E<lt>E<lt>E<lt>E<lt>E<lt>E<lt>E<lt>>,
C<E<gt>E<gt>E<gt>E<gt>E<gt>E<gt>E<gt>>, or C<=======>.  These may be left by a
version control system to mark conflicts after a failed merge operation.

=item *

L<%s: command not found|perldiag/"%s: command not found">

(A) You've accidentally run your script through B<bash> or another shell
instead of Perl.  Check the #! line, or manually feed your script into
Perl yourself.  The #! line at the top of your file could look like:

  #!/usr/bin/perl

=item *

L<%s: command not found: %s|perldiag/"%s: command not found: %s">

(A) You've accidentally run your script through B<zsh> or another shell
instead of Perl.  Check the #! line, or manually feed your script into
Perl yourself.  The #! line at the top of your file could look like:

  #!/usr/bin/perl

=item *

L<Unescaped left brace in regex is illegal here|perldiag/Unescaped left brace in regex is illegal here in regex; marked by S<E<lt>-- HERE> in m/%s/>

Unescaped left braces are now illegal in some contexts in regular expression
patterns.  In other contexts, they are still just deprecated; they will
be illegal in Perl 5.30.

=item *

L<Bareword in require contains "%s"|perldiag/"Bareword in require contains "%s"">

=item *

L<Bareword in require maps to empty filename|perldiag/"Bareword in require maps to empty filename">

=item *

L<Bareword in require maps to disallowed filename "%s"|perldiag/"Bareword in require maps to disallowed filename "%s"">

=item *

L<Bareword in require must not start with a double-colon: "%s"|perldiag/"Bareword in require must not start with a double-colon: "%s"">

=back

=head3 New Warnings

=over 4

=item *

L<Use of unassigned code point or non-standalone grapheme for a delimiter will be a fatal error starting in Perl 5.30|perldiag/"Use of unassigned code point or non-standalone grapheme for a delimiter will be a fatal error starting in Perl 5.30">

See L</Deprecations>

=item *

L<Declaring references is experimental|perldiag/"Declaring references is experimental">

(S experimental::declared_refs) This warning is emitted if you use a reference
constructor on the right-hand side of C<my()>, C<state()>, C<our()>, or
C<local()>.  Simply suppress the warning if you want to use the feature, but
know that in doing so you are taking the risk of using an experimental feature
which may change or be removed in a future Perl version:

    no warnings "experimental::declared_refs";
    use feature "declared_refs";
    $fooref = my \$foo;

=item *

L<C<${^ENCODING}> is no longer supported. Its use will be fatal in Perl 5.28|perldiag/"${^ENCODING} is no longer supported. Its use will be fatal in Perl 5.28">

The special variable C<${^ENCODING}>, formerly used to implement
the C<encoding> pragma, is no longer supported as of Perl 5.26.

=item *

Since C<.> is now removed from C<@INC> by default, C<do> will now trigger
a warning recommending to fix the C<do> statement:

L<do "%s" failed, '.' is no longer in @INC|perldiag/do "%s" failed, '.' is no longer in @INC; did you mean do ".E<sol>%s"?>

=back

=head2 Changes to Existing Diagnostics

=over 4

=item *

When a C<require> fails, we now do not provide C<@INC> when the C<require>
is for a file instead of a module.

=item *

When C<@INC> is not scanned for a C<require> call, we no longer display
C<@INC> to avoid confusion.

=item *

Attribute "locked" is deprecated, and will disappear in Perl 5.28

=item *

Attribute "unique" is deprecated, and will disappear in Perl 5.28

=item *

Constants from lexical variables potentially modified elsewhere are
deprecated. This will not be allowed in Perl 5.32

=item *

Deprecated use of my() in false conditional. This will be a fatal error
in Perl 5.30

=item *

dump() better written as CORE::dump(). dump() will no longer be available
in Perl 5.30

=item *

${^ENCODING} is no longer supported. Its use will be fatal in Perl 5.28

=item *

File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob()
instead.

=item *

%s() is deprecated on :utf8 handles. This will be a fatal error in Perl 5.30

=item *

$* is no longer supported. Its use will be fatal in Perl 5.30

=item *

$* is no longer supported. Its use will be fatal in Perl 5.30

=item *

Opening dirhandle %s also as a file. This will be a fatal error in Perl 5.28

=item *

Opening filehandle %s also as a directory. This will be a fatal
error in Perl 5.28

=item *

Setting $/ to a reference to %s as a form of slurp is deprecated,
treating as undef. This will be fatal in Perl 5.28

=item *

Unescaped left brace in regex is deprecated here (and will be fatal
in Perl 5.30), passed through in regex; marked by S<< E<lt>-- HERE >> in m/%s/

=item *

Unknown charname '' is deprecated. Its use will be fatal in Perl 5.28

=item *

Use of bare E<lt>E<lt> to mean E<lt>E<lt>"" is deprecated. Its use will be fatal in Perl 5.28

=item *

Use of code point 0x%s is deprecated; the permissible max is 0x%s.
This will be fatal in Perl 5.28

=item *

Use of comma-less variable list is deprecated. Its use will be fatal
in Perl 5.28

=item *

Use of inherited AUTOLOAD for non-method %s() is deprecated. This
will be fatal in Perl 5.28

=item *

Use of strings with code points over 0xFF as arguments to %s operator
is deprecated. This will be a fatal error in Perl 5.28

=item *

Improve error for missing tie() package/method. This brings the error messages
in line with the ones used for normal method calls, despite not using
call_method().

=item *

Make the sysread()/syswrite/() etc :utf8 handle warnings default. These
warnings were under 'deprecated' previously.

=item *

'do' errors now refer to 'do' (not 'require').

=item *

Details as to the exact problem have been added to the diagnostics that
occur when malformed UTF-8 is encountered when trying to convert to a
code point.

=item *

Executing C<undef $x> where C<$x> is tied or magical no longer incorrectly
blames the variable for an uninitialized-value warning encountered by the
tied/magical code.

=item *

Code like C<$x = $x . "a"> was incorrectly failing to yield a
L<use of uninitialized value|perldiag/"Use of uninitialized value%s">
warning when C<$x> was a lexical variable with an undefined value. That has
now been fixed. [perl #127877]

=item *

When the error "Experimental push on scalar is now forbidden" is raised for
the hash functions C<keys>, C<each>, and C<values>, it is now followed by
the more helpful message, "Type of arg 1 to whatever must be hash or
array". [perl #127976]

=item *

C<undef *_; shift> or C<undef *_; pop> inside a subroutine, with no
argument to C<shift> or C<pop>, began crashing in Perl 5.14, but has now
been fixed.

=item *

C<< "string$scalar-E<gt>$*" >> now correctly prefers concat overloading to
string overloading if C<< $scalar-E<gt>$* >> returns an overloaded object,
bringing it into consistency with C<$$scalar>.

=item *

C<< /@0{0*-E<gt>@*/*0 >> and similar contortions used to crash, but no longer
do, but merely produce a syntax error. [perl #128171]

=item *

C<do> or C<require> with a reference or typeglob which, when stringified,
contains a null character started crashing in Perl 5.20, but has now been
fixed. [perl #128182]

=back

=head1 Utility Changes

=head2 F<c2ph> and F<pstruct>

=over 4

=item *

These old utilities have long since superceded by L<h2xs>, and are
now gone from the distribution.

=back

=head2 F<Porting/pod_lib.pl>

=over 4

=item *

Removed spurious executable bit.

=item *

Account for possibility of DOS file endings.

=back

=head2 F<Porting/sync-with-cpan>

=over 4

=item *

Many improvements

=back

=head2 F<perf/benchmarks>

=over 4

=item *

Tidy file, rename some symbols.

=back

=head2 F<Porting/checkAUTHORS.pl>

=over 4

=item *

Replace obscure character range with C<\w>.

=back

=head2 F<t/porting/regen.t>

=over 4

=item *

try to be more helpful when tests fail.

=back

=head2 F<utils/h2xs.PL>

=over 4

=item *

Avoid infinite loop for enums.

=back

=head2 L<perlbug>

=over 4

=item *

Long lines in the message body are now wrapped at 900 characters, to stay
well within the 1000-character limit imposed by SMTP mail transfer agents.
This is particularly likely to be important for the list of arguments to
C<Configure>, which can readily exceed the limit if, for example, it names
several non-default installation paths.  This change also adds the first unit
tests for perlbug. [perl #128020]

=back

=head1 Configuration and Compilation

=over 4

=item *

C<-Ddefault_inc_excludes_dot> has been turned on by default.

=item *

The C<dtrace> build process has further changes:

=over

=item *

If the C<-xnolibs> is available, use that so a F<dtrace> perl can be
built within a FreeBSD jail.

=item *

On systems that build a dtrace object file (FreeBSD, Solaris and
SystemTap's dtrace emulation), copy the input objects to a separate
directory and process them there, and use those objects in the link,
since C<dtrace -G> also modifies these objects.

=item *

Add libelf to the build on FreeBSD 10.x, since dtrace adds references
to libelf symbols.

=item *

Generate a dummy dtrace_main.o if C<dtrace -G> fails to build it.  A
default build on Solaris generates probes from the unused inline
functions, while they don't on FreeBSD, which causes C<dtrace -G> to
fail.

=back

[perl #130108]

=item *

You can now disable perl's use of the PERL_HASH_SEED and
PERL_PERTURB_KEYS environment variables by configuring perl with
C<-Accflags=NO_PERL_HASH_ENV>.

=item *

You can now disable perl's use of the PERL_HASH_SEED_DEBUG environment
variable by configuring perl with
C<-Accflags=-DNO_PERL_HASH_SEED_DEBUG>.

=item *

Zero out the alignment bytes when calculating the bytes for 80-bit C<NaN>
and C<Inf> to make builds more reproducible. [perl #130133]

=item *

Since 5.18 for testing purposes we have included support for
building perl with a variety of non-standard, and non-recommended
hash functions.  Since we do not recommend the use of these functions
we have removed them and their corresponding build options.  Specifically
this includes the following build options:

    PERL_HASH_FUNC_SDBM
    PERL_HASH_FUNC_DJB2
    PERL_HASH_FUNC_SUPERFAST
    PERL_HASH_FUNC_MURMUR3
    PERL_HASH_FUNC_ONE_AT_A_TIME
    PERL_HASH_FUNC_ONE_AT_A_TIME_OLD
    PERL_HASH_FUNC_MURMUR_HASH_64A
    PERL_HASH_FUNC_MURMUR_HASH_64B

=item *

Remove "Warning: perl appears in your path"

This install warning is more or less obsolete, since most platforms already
*will* have a /usr/bin/perl or similar provided by the OS.

=item *

Reduce verbosity of "make install.man"

Previously, two progress messages were emitted for each manpage: one by
installman itself, and one by the function in install_lib.pl that it calls to
actually install the file.  Disabling the second of those in each case saves
over 750 lines of unhelpful output.

=item *

Cleanup for clang -Weverything support. [perl 129961]

=item *

Configure: signbit scan was assuming too much, stop assuming negative 0.

=item *

Various compiler warnings have been silenced.

=item *

Several smaller changes have been made to remove impediments to compiling under
C++11.

=item *

Builds using C<USE_PAD_RESET> now work again; this configuration had
bit-rotted.

=item *

A probe for C<gai_strerror> was added to F<Configure> that checks if the
the gai_strerror() routine is available and can be used to
translate error codes returned by getaddrinfo() into human
readable strings.

=item *

F<Configure> now aborts if both "-Duselongdouble" and "-Dusequadmath" are
requested.
L<[perl #126203]|https://rt.perl.org/Public/Bug/Display.html?id=126203>

=item *

Fixed a bug in which F<Configure> could append "-quadmath" to the archname even
if it was already present.
L<[perl #128538]|https://rt.perl.org/Public/Bug/Display.html?id=128538>

=item *

Clang builds with "-DPERL_GLOBAL_STRUCT" or "-DPERL_GLOBAL_STRUCT_PRIVATE" have
been fixed (by disabling Thread Safety Analysis for these configurations).

=item *

F<make_ext.pl> no longer updates a module's F<pm_to_blib> file when no
files require updates.  This could cause dependencies, F<perlmain.c>
in particular, to be rebuilt unnecessarily.  [perl #126710]

=item *

The output of C<perl -V> has been reformatted so that each configuration
and compile-time option is now listed one per line, to improve
readability.

=item *

C<Configure> now builds C<miniperl> and C<generate_uudmap> if you
invoke it with C<-Dusecrosscompiler> but not C<-Dtargethost=somehost>.
This means you can supply your target platform C<config.sh>, generate
the headers and proceed to build your cross-target perl.  [perl #127234]

=item *

Builds with C<-Accflags=-DPERL_TRACE_OPS> now only dump the operator
counts when the environment variable C<PERL_TRACE_OPS> to be set to a
non-zero integer.  This allows C<make test> to pass on such a build.

=item *

When building with GCC 6 and link-time optimization (the C<-flto> option to
C<gcc>), C<Configure> was treating all probed symbols as present on the
system, regardless of whether they actually exist.  This has been fixed.
[perl #128131]

=item *

The F<t/test.pl> library is used for internal testing of Perl itself, and
also copied by several CPAN modules.  Some of those modules must work on
older versions of Perl, so F<t/test.pl> must in turn avoid newer Perl
features.  Compatibility with Perl 5.8 was inadvertently removed some time
ago; it has now been restored. [perl #128052]

=item *

The build process no longer emits an extra blank line before building each
"simple" extension (those with only F<*.pm> and F<*.pod> files).

=back

=head1 Testing

=over 4

=item *

F<XS-APItest/t/utf8.t>: Several small fixes and enhancements.

=item *

Tests for locales were erroneously using locales incompatible with Perl.

=item *

Some parts of the test suite that try to exhaustively test edge cases in the
regex implementation have been restricted to running for a maximum of five
minutes.  On slow systems they could otherwise take several hours, without
significantly improving our understanding of the correctness of the code
under test.

In addition, some of those test cases have been split into more files, to
allow them to be run in parallel on suitable systems.

=item *

A new internal facility allows analysing the time taken by the individual
tests in Perl's own test suite; see F<Porting/harness-timer-report.pl>.

=item *

F<t/re/regexp_nonull.t> has been added to test that the regular expression
engine can handle scalars that do not have a null byte just past the end of
the string.

=item *

A new test script, F<t/op/decl-refs.t>, has been added to test the new feature,
"Declaring a reference to a variable".

=item *

A new test script, F<t/re/anyof.t>, has been added to test that the ANYOF nodes
generated by bracketed character classes are as expected.

=item *

F<t/harness> now tries really hard not to run tests outside of the Perl
source tree. [perl #124050]

=back

=head1 Platform Support

=head2 New Platforms

=over 4

=item NetBSD/VAX

Perl now compiles under NetBSD on VAX machines.  However, it's not
possible for that platform to implement floating-point infinities and
NaNs compatibly with most modern systems, which implement the IEEE-754
floating point standard.  The hexadecimal floating point (C<0x...p[+-]n>
literals, C<printf %a>) is not implemented, either.
The C<make test> passes 98% of tests.

=over 4

=item *

Test fixes and minor updates.

=item *

Account for lack of C<inf>, C<nan>, and C<-0.0> support.

=back

=back

=head2 Platform-Specific Notes

=over 4

=item Darwin

don't treat -Dprefix=/usr as special, instead require an extra option
-Ddarwin_distribution to produce the same results.

=item POSIX

Finish removing POSIX deprecated functions.

=item OS X

OS X El Capitan doesn't implement the clock_gettime() or clock_getres() APIs;
emulate them as necessary.

=item macOS

Deprecated syscall(2) on macOS 10.12.

=item EBCDIC

Several tests have been updated to work (or be skipped) on EBCDIC platforms.

=item HP-UX

L<Net::Ping> UDP test is skipped on HP-UX.

=item Hurd

The hints for Hurd have been improved enabling malloc wrap and reporting the
GNU libc used (previously it was an empty string when reported).

=item VAX

VAX floating point formats are now supported on NetBSD.

=item VMS

=over 4

=item *

The path separator for the C<PERL5LIB> and C<PERLLIB> environment entries is
now a colon (C<:>) when running under a Unix shell.  There is no change when
running under DCL (it's still C<|>).

=item *

C<configure.com> now recognizes the VSI-branded C compiler and no longer
recognizes the "DEC"-branded C compiler (as there hasn't been such a thing for
15 or more years).

=back

=item Windows

=over 4

=item *

Support for compiling perl on Windows using Microsoft Visual Studio 2015
(containing Visual C++ 14.0) has been added.

This version of VC++ includes a completely rewritten C run-time library, some
of the changes in which mean that work done to resolve a socket close() bug in
perl #120091 and perl #118059 is not workable in its current state with this
version of VC++.  Therefore, we have effectively reverted that bug fix for
VS2015 onwards on the basis that being able to build with VS2015 onwards is
more important than keeping the bug fix.  We may revisit this in the future to
attempt to fix the bug again in a way that is compatible with VS2015.

These changes do not affect compilation with GCC or with Visual Studio versions
up to and including VS2013, I<i.e.>, the bug fix is retained (unchanged) for those
compilers.

Note that you may experience compatibility problems if you mix a perl built
with GCC or VS E<lt>= VS2013 with XS modules built with VS2015, or if you mix a
perl built with VS2015 with XS modules built with GCC or VS E<lt>= VS2013.
Some incompatibility may arise because of the bug fix that has been reverted
for VS2015 builds of perl, but there may well be incompatibility anyway because
of the rewritten CRT in VS2015 (I<e.g.>, see discussion at
http://stackoverflow.com/questions/30412951).

=back

=item Win32

=over 4

=item *

Tweaks for Win32 VC vs GCC detection makefile code.  This fixes issue that CCHOME
depends on CCTYPE, which in auto detect mode is set after CCHOME, so CCHOME uses
the uninit CCTYPE var.  Also fix else vs .ELSE in makefile.mk

=item *

fp definitions have been updated.

=back

=item Linux

Drop support for Linux a.out Linux has used ELF for over twenty years.

=item OpenBSD 6

OpenBSD 6 still does not support returning pid, gid or uid with SA_SIGINFO.
Make sure this is accounted for.

=item FreeBSD

t/uni/overload.t: Skip hanging test on FreeBSD.

=back

=head1 Internal Changes

=over 4

=item *

The C<op_class()> API function has been added.  This is like the existing
C<OP_CLASS()> macro, but can more accurately determine what struct an op
has been allocated as.  For example C<OP_CLASS()> might return
C<OA_BASEOP_OR_UNOP> indicating that ops of this type are usually
allocated as an C<OP> or C<UNOP>; while C<op_class()> will return
C<OPclass_BASEOP> or C<OPclass_UNOP> as appropriate.

=item *

The output format of the C<op_dump()> function (as used by C<perl -Dx>)
has changed: it now displays an "ASCII-art" tree structure, and shows more
low-level details about each op, such as its address and class.

=item *

New versions of macros like C<isALPHA_utf8> and C<toLOWER_utf8>  have
been added, each with the
suffix C<_safe>, like C<isSPACE_utf8_safe>.  These take an extra
parameter, giving an upper limit of how far into the string it is safe
to read.  Using the old versions could cause attempts to read beyond the
end of the input buffer if the UTF-8 is not well-formed, and their use
now raises a deprecation warning.  Details are at
L<perlapi/Character classification>.

=item *

Calling macros like C<isALPHA_utf8> on malformed UTF-8 have issued a
deprecation warning since Perl 5.18.  They now die.
Similarly, macros like C<toLOWER_utf8> on malformed UTF-8 now die.

=item *

Calling the functions C<utf8n_to_uvchr> and its derivatives, while
passing a string length of 0 is now asserted against in DEBUGGING
builds, and otherwise returns the Unicode REPLACEMENT CHARACTER.   If
you have nothing to decode, you shouldn't call the decode function.

=item *

The functions C<utf8n_to_uvchr> and its derivatives now return the
Unicode REPLACEMENT CHARACTER if called with UTF-8 that has the overlong
malformation, and that malformation is allowed by the input parameters.
This malformation is where the UTF-8 looks valid syntactically, but
there is a shorter sequence that yields the same code point.  This has
been forbidden since Unicode version 3.1.

=item *

The functions C<utf8n_to_uvchr> and its derivatives now accept an input
flag to allow the overflow malformation.  This malformation is when the
UTF-8 may be syntactically valid, but the code point it represents is
not capable of being represented in the word length on the platform.
What "allowed" means in this case is that the function doesn't return an
error, and advances the parse pointer to beyond the UTF-8 in question,
but it returns the Unicode REPLACEMENT CHARACTER as the value of the
code point (since the real value is not representable).

=item *

The C<PADOFFSET> type has changed from being unsigned to signed, and
several pad-related variables such as C<PL_padix> have changed from being
of type C<I32> to type C<PADOFFSET>.

=item *

The function C<L<perlapi/utf8n_to_uvchr>> has been changed to not
abandon searching for other malformations when the first one is
encountered.  A call to it thus can generate multiple diagnostics,
instead of just one.

=item *

A new function, C<L<perlapi/utf8n_to_uvchr_error>>, has been added for
use by modules that need to know the details of UTF-8 malformations
beyond pass/fail.  Previously, the only ways to know why a sequence was
ill-formed was to capture and parse the generated diagnostics, or to do
your own analysis.

=item *

Several new functions for handling Unicode have been added to the API:
C<L<perlapi/is_strict_utf8_string>>,
C<L<perlapi/is_c9strict_utf8_string>>,
C<L<perlapi/is_utf8_string_flags>>,
C<L<perlapi/is_strict_utf8_string_loc>>,
C<L<perlapi/is_strict_utf8_string_loclen>>,
C<L<perlapi/is_c9strict_utf8_string_loc>>,
C<L<perlapi/is_c9strict_utf8_string_loclen>>,
C<L<perlapi/is_utf8_string_loc_flags>>,
C<L<perlapi/is_utf8_string_loclen_flags>>,
C<L<perlapi/is_utf8_fixed_width_buf_flags>>,
C<L<perlapi/is_utf8_fixed_width_buf_loc_flags>>,
C<L<perlapi/is_utf8_fixed_width_buf_loclen_flags>>.

These functions are all extensions of the C<is_utf8_string_*()> functions,
that apply various restrictions to the UTF-8 recognized as valid.

=item *

A new API function C<sv_setvpv_bufsize()> allows simultaneously setting the
length and allocated size of the buffer in an C<SV>, growing the buffer if
necessary.

=item *

A new API macro C<SvPVCLEAR()> sets its C<SV> argument to an empty string,
like Perl-space C<$x = ''>, but with several optimisations.

=item *

All parts of the internals now agree that the C<sassign> op is a C<BINOP>;
previously it was listed as a C<BASEOP> in F<regen/opcodes>, which meant
that several parts of the internals had to be special-cased to accommodate
it.  This oddity's original motivation was to handle code like C<$x ||= 1>;
that is now handled in a simpler way.

=item *

Several new internal C macros have been added that take a string literal as
arguments, alongside existing routines that take the equivalent value as two
arguments, a character pointer and a length.  The advantage of this is that
the length of the string is calculated automatically, rather than having to
be done manually.  These routines are now used where appropriate across the
entire codebase.

=item *

The code in F<gv.c> that determines whether a variable has a special meaning
to Perl has been simplified.

=item *

The C<DEBUGGING>-mode output for regex compilation and execution has been
enhanced.

=item *

Several macros and functions have been added to the public API for
dealing with Unicode and UTF-8-encoded strings.  See
L<perlapi/Unicode Support>.

=item *

Use C<my_strlcat()> in C<locale.c>.  While C<strcat()> is safe in this context,
some compilers were optimizing this to C<strcpy()> causing a porting test to
fail that looks for unsafe code.  Rather than fighting this, we just use
C<my_strlcat()> instead.

=item *

Three new ops, C<OP_ARGELEM>, C<OP_ARGDEFELEM> and C<OP_ARGCHECK> have
been added.  These are intended principally to implement the individual
elements of a subroutine signature, plus any overall checking required.

=item *

Perl no longer panics when switching into some locales on machines with
buggy C<strxfrm()> implementations in their libc. [perl #121734]

=item *

Perl is now built with the C<PERL_OP_PARENT> compiler define enabled by
default.  To disable it, use the C<PERL_NO_OP_PARENT> compiler define.
This flag alters how the C<op_sibling> field is used in C<OP> structures,
and has been available optionally since perl 5.22.

See L<perl5220delta/"Internal Changes"> for more details of what this
build option does.

=item *

The meanings of some internal SV flags have been changed

OPpRUNTIME, SVpbm_VALID, SVpbm_TAIL, SvTAIL_on, SvTAIL_off, SVrepl_EVAL,
SvEVALED

=item *

Change C<hv_fetch(…, "…", …, …)> to C<hv_fetchs(…, "…", …)>

The dual-life dists all use Devel::PPPort, so they can use this function even
though it was only added in 5.10.

=back

=head1 Selected Bug Fixes

=over 4

=item *

C< $-{$name} > would leak an C<AV> on each access if the regular
expression had no named captures.  The same applies to access to any
hash tied with L<Tie::Hash::NamedCapture> and C<< all =E<gt> 1 >>. [perl
#130822]

=item *

Attempting to use the deprecated variable C<$#> as the object in an
indirect object method call could cause a heap use after free or
buffer overflow.  [perl #129274]

=item *

When checking for an indirect object method call in some rare cases
the parser could reallocate the line buffer but then continue to use
pointers to the old buffer.  [perl #129190]

=item *

Supplying a glob as the format argument to L<perlfunc/formline> would
cause an assertion failure.  [perl #130722]

=item *

Code like C< $value1 =~ qr/.../ ~~ $value2 > would have the match
converted into a qr// operator, leaving extra elements on the stack to
confuse any surrounding expression.  [perl #130705]

=item *

Since 5.24 in some obscure cases, a regex which included code blocks
from multiple sources (I<e.g.>, via embedded via qr// objects) could end up
with the wrong current pad and crash or give weird results. [perl #129881]

=item *

Occasionally C<local()>s in a code block within a patterns weren't being
undone when the pattern matching backtracked over the code block.
[perl #126697]

=item *

Using C<substr()> to modify a magic variable could access freed memory
in some cases.  [perl #129340]

=item *

Under C<use utf8>, the entire Perl program is now checked that the UTF-8
is wellformed.  This resolves [perl #126310].

=item *

The range operator C<..> on strings now handles its arguments correctly when in
the scope of the L<< C<unicode_strings>|feature/"The 'unicode_strings' feature" >>
feature.  The previous behaviour was sufficiently unexpected that we believe no
correct program could have made use of it.

=item *

The S<split> operator did not ensure enough space was allocated for
its return value in scalar context.  It could then write a single
pointer immediately beyond the end of the memory block allocated for
the stack.  [perl #130262]

=item *

Using a large code point with the C<W> pack template character with
the current output position aligned at just the right point could
cause a write a single zero byte immediately beyond the end of an
allocated buffer.  [perl #129149]

=item *

Supplying the form picture argument as part of the form argument list
where the picture specifies modifying the argument could cause an
access to the new freed compiled form.  [perl #129125]

=item *

Fix a problem with sort's build-in compare, where it would not sort
correctly with 64-bit integers, and non-long doubles. [perl #130335]

=item *

Fix issues with /(?{ ... E<lt>E<lt>EOF })/ that broke Method-Signatures. [perl #130398]

=item *

Fix a macro which caused syntax error on an EBCDIC build.

=item *

Prevent tests from getting hung up on 'NonStop' option. [perl #130445]

=item *

Fixed an assertion failure with C<chop> and C<chomp>, which
could be triggered by C<chop(@x =~ tr/1/1/)>. [perl #130198].

=item *

Fixed a comment skipping error under C</x>; it could stop skipping a
byte early, which could be in the middle of a UTF-8 character.
[perl #130495].

=item *

F<perldb> now ignores F</dev/tty> on non-Unix systems. [perl #113960];

=item *

Fix assertion failure for C<{}-E<gt>$x> when C<$x> isn't defined. [perl #130496].

=item *

DragonFly BSD now has support for setproctitle(). [perl #130068].

=item *

Fix an assertion error which could be triggered when lookahead string
in patterns exceeded a minimum length. [perl #130522].

=item *

Only warn once per literal about a misplaced C<_>. [perl #70878].

=item *

Ensure range-start is set after error in C<tr///>. [perl #129342].

=item *

Don't read past start of string for unmatched backref; otherwise,
we may have heap buffer overflow. [perl #129377].

=item *

Properly recognize mathematical digit ranges starting at U+1D7E.
C<use re 'strict'> is supposed to warn if you use a range whose start
and end digit aren't from the same group of 10.  It didn't do that
for five groups of mathematical digits starting at U+1D7E.

=item *

A sub containing a "forward" declaration with the same name (I<e.g.>,
C<sub c { sub c; }>) could sometimes crash or loop infinitely.  [perl
#129090]

=item *

A crash in executing a regex with a floating UTF-8 substring against a
target string that also used UTF-8 has been fixed. [perl #129350]

=item *

Previously, a shebang line like C<#!perl -i u> could be erroneously
interpreted as requesting the C<-u> option.  This has been fixed. [perl
#129336]

=item *

The regex engine was previously producing incorrect results in some rare
situations when backtracking past a trie that matches only one thing; this
showed up as capture buffers (C<$1>, C<$2>, etc) erroneously containing data
from regex execution paths that weren't actually executed for the final
match.  [perl #129897]

=item *

Certain regexes making use of the experimental C<regex_sets> feature could
trigger an assertion failure.  This has been fixed. [perl #129322]

=item *

Invalid assignments to a reference constructor (I<e.g.>, C<\eval=time>) could
sometimes crash in addition to giving a syntax error.  [perl #125679]

=item *

The parser could sometimes crash if a bareword came after C<evalbytes>.
[perl #129196]

=item *

Autoloading via a method call would warn erroneously ("Use of inherited
AUTOLOAD for non-method") if there was a stub present in the package into
which the invocant had been blessed.  The warning is no longer emitted in
such circumstances.  [perl #47047]

=item *

A sub containing with a "forward" declaration with the same name
(I<e.g.>,
C<sub c { sub c; }>) could sometimes crash or loop infinitely.  [perl
#129090]

=item *

The use of C<splice> on arrays with nonexistent elements could cause other
operators to crash.  [perl #129164]

=item *

Fixed case where C<re_untuit_start> will overshoot the length of a utf8
string. [perl #129012]

=item *

Handle C<CXt_SUBST> better in C<Perl_deb_stack_all>, previously it wasn't
checking that the I<current> C<cx> is the right type, and instead was always
checking the base C<cx> (effectively a noop). [perl #129029]

=item *

Fixed two possible use-after-free bugs in C<Perl_yylex>.  C<Perl_yylex>
maintains up to two pointers into the parser buffer, one of which can
become stale under the right conditions. [perl #129069]

=item *

Fixed a crash with C<s///l> where it thought it was dealing with UTF-8
when it wasn't. [perl #129038]

=item *

Fixed place where regex was not setting the syntax error correctly.
[perl #129122]

=item *

The C<&.> operator (and the C<&> operator, when it treats its arguments as
strings) were failing to append a trailing null byte if at least one string
was marked as utf8 internally.  Many code paths (system calls, regexp
compilation) still expect there to be a null byte in the string buffer
just past the end of the logical string.  An assertion failure was the
result.  [perl #129287]

=item *

Check C<pack_sockaddr_un()>'s return value because C<pack_sockaddr_un()>
silently truncates the supplied path if it won't fit into the C<sun_path>
member of C<sockaddr_un>.  This may change in the future, but for now
check the path in theC<sockaddr> matches the desired path, and skip if
it doesn't. [perl #128095]

=item *

Make sure C<PL_oldoldbufptr> is preserved in C<scan_heredoc()>.  In some
cases this is used in building error messages. [perl #128988]

=item *

Check for null PL_curcop in IN_LC() [perl #129106]

=item *

Fixed the parser error handling for an 'C<:attr(foo>' that does not have
an ending 'C<)>'.

=item *

Fix C<Perl_delimcpy()> to handle a backslash as last char, this
actually fixed two bugs, [perl #129064] and [perl #129176].

=item *

[perl #129267] rework gv_fetchmethod_pvn_flags separator parsing to
prevent possible string overrun with invalid len in gv.c

=item *

Problems with in-place array sorts: code like C<@a = sort { ... } @a>,
where the source and destination of the sort are the same plain array, are
optimised to do less copying around.  Two side-effects of this optimisation
were that the contents of C<@a> as visible to to sort routine were
partially sorted, and under some circumstances accessing C<@a> during the
sort could crash the interpreter.  Both these issues have been fixed, and
Sort functions see the original value of C<@a>.

=item *

Non-ASCII string delimiters are now reported correctly in error messages
for unterminated strings.  [perl #128701]

=item *

C<pack("p", ...)> used to emit its warning ("Attempt to pack pointer to
temporary value") erroneously in some cases, but has been fixed.

=item *

C<@DB::args> is now exempt from "used once" warnings.  The warnings only
occurred under B<-w>, because F<warnings.pm> itself uses C<@DB::args>
multiple times.

=item *

The use of built-in arrays or hash slices in a double-quoted string no
longer issues a warning ("Possible unintended interpolation...") if the
variable has not been mentioned before.  This affected code like
C<qq|@DB::args|> and C<qq|@SIG{'CHLD', 'HUP'}|>.  (The special variables
C<@-> and C<@+> were already exempt from the warning.)

=item *

C<gethostent> and similar functions now perform a null check internally, to
avoid crashing with torsocks.  This was a regression from 5.22.  [perl
#128740]

=item *

C<defined *{'!'}>, C<defined *{'['}>, and C<defined *{'-'}> no longer leak
memory if the typeglob in question has never been accessed before.

=item *

Mentioning the same constant twice in a row (which is a syntax error) no
longer fails an assertion under debugging builds.  This was a regression
from 5.20.  [perl #126482]

=item *

Many issues relating to C<printf "%a"> of hexadecimal floating point
were fixed.  In addition, the "subnormals" (formerly known as "denormals")
floating point anumbers are now supported both with the plain IEEE 754
floating point numbers (64-bit or 128-bit) and the x86 80-bit
"extended precision".  Note that subnormal hexadecimal floating
point literals will give a warning about "exponent underflow".
[perl #128843, #128889, #128890, #128893, #128909, #128919]

=item *

A regression in 5.24 with C<tr/\N{U+...}/foo/> when the code point was between
128 and 255 has been fixed. [perl #128734].

=item *

A regression from the previous development release, 5.23.3, where
compiling a regular expression could crash the interpreter has been
fixed. [perl #128686].

=item *

Use of a string delimiter whose code point is above 2**31 now works
correctly on platforms that allow this.  Previously, certain characters,
due to truncation, would be confused with other delimiter characters
with special meaning (such as C<?> in C<m?...?>), resulting
in inconsistent behaviour.  Note that this is non-portable,
and is based on Perl's extension to UTF-8, and is probably not
displayable nor enterable by any editor. [perl #128738]

=item *

C<@{x> followed by a newline where C<x> represents a control or non-ASCII
character no longer produces a garbled syntax error message or a crash.
[perl #128951]

=item *

An assertion failure with C<%: = 0> has been fixed.
L<[perl #128238]|https://rt.perl.org/Public/Bug/Display.html?id=128238>

=item *

In Perl 5.18, the parsing of C<"$foo::$bar"> was accidentally changed, such
that it would be treated as C<$foo."::".$bar>.  The previous behavior, which
was to parse it as C<$foo:: . $bar>, has been restored.
L<[perl #128478]|https://rt.perl.org/Public/Bug/Display.html?id=128478>

=item *

Since Perl 5.20, line numbers have been off by one when perl is invoked with
the B<-x> switch.  This has been fixed.
L<[perl #128508]|https://rt.perl.org/Public/Bug/Display.html?id=128508>

=item *

Vivifying a subroutine stub in a deleted stash (I<e.g.>, C<delete $My::{"Foo::"};
\&My::Foo::foo>) no longer crashes.  It had begun crashing in Perl 5.18.
L<[perl #128532]|https://rt.perl.org/Public/Bug/Display.html?id=128532>

=item *

Some obscure cases of subroutines and file handles being freed at the same time
could result in crashes, but have been fixed.  The crash was introduced in Perl
5.22.
L<[perl #128597]|https://rt.perl.org/Public/Bug/Display.html?id=128597>

=item *

Code that looks for a variable name associated with an uninitialized value
could cause an assertion in cases where magic is involved, such as
C<$ISA[0][0]>.  This has now been fixed.
L<[perl #128253]|https://rt.perl.org/Public/Bug/Display.html?id=128253>

=item *

A crash caused by code generating the warning "Subroutine STASH::NAME
redefined" in cases such as C<sub P::f{} undef *P::; *P::f =sub{};> has been
fixed.  In these cases, where the STASH is missing, the warning will now appear
as "Subroutine NAME redefined".
L<[perl #128257]|https://rt.perl.org/Public/Bug/Display.html?id=128257>

=item *

Fixed an assertion triggered by some code that handles deprecated behavior in
formats, I<e.g.>, in cases like this:

    format STDOUT =
    @
    0"$x"

L<[perl #128255]|https://rt.perl.org/Public/Bug/Display.html?id=128255>

=item *

A possible divide by zero in string transformation code on Windows has been
avoided, fixing a crash when collating an empty string.
L<[perl #128618]|https://rt.perl.org/Public/Bug/Display.html?id=128618>

=item *

Some regular expression parsing glitches could lead to assertion failures with
regular expressions such as C</(?E<lt>=/> and C</(?E<lt>!/>.  This has now been fixed.
L<[perl #128170]|https://rt.perl.org/Public/Bug/Display.html?id=128170>

=item *

C< until ($x = 1) { ... } > and C< ... until $x = 1 > now properly
warn when syntax warnings are enabled.  [perl #127333]

=item *

socket() now leaves the error code returned by the system in C<$!> on
failure.  [perl #128316]

=item *

Assignment variants of any bitwise ops under the C<bitwise> feature would
crash if the left-hand side was an array or hash.  [perl #128204]

=item *

C<require> followed by a single colon (as in C<foo() ? require : ...> is
now parsed correctly as C<require> with implicit $_, rather than
C<require "">.  [perl #128307]

=item *

Scalar C<keys %hash> can now be assigned to consistently in all scalar
lvalue contexts.  Previously it worked for some contexts but not others.

=item *

List assignment to C<vec> or C<substr> with an array or hash for its first
argument used to result in crashes or "Can't coerce" error messages at run
time, unlike scalar assignment, which would give an error at compile time.
List assignment now gives a compile-time error, too.  [perl #128260]

=item *

Expressions containing an C<&&> or C<||> operator (or their synonyms C<and>
and C<or>) were being compiled incorrectly in some cases.  If the left-hand
side consisted of either a negated bareword constant or a negated C<do {}>
block containing a constant expression, and the right-hand side consisted of
a negated non-foldable expression, one of the negations was effectively
ignored.  The same was true of C<if> and C<unless> statement modifiers,
though with the left-hand and right-hand sides swapped.  This long-standing
bug has now been fixed. [perl #127952]

=item *

C<reset> with an argument no longer crashes when encountering stash entries
other than globs. [perl #128106]

=item *

Assignment of hashes to, and deletion of, typeglobs named C<*::::::> no
longer causes crashes. [perl #128086]

=item *

Handle SvIMMORTALs in LHS of list assign. [perl #129991]

=item *

[perl #130010] a5540cf breaks texinfo

This involved user-defined Unicode properties.

=item *

Fix error message for unclosed C<\N{> in regcomp.

An unclosed C<\N{> could give the wrong error message
C<"\N{NAME} must be resolved by the lexer">.

=item *

List assignment in list context where the LHS contained aggregates and
where there were not enough RHS elements, used to skip scalar lvalues.
Previously, C<(($a,$b,@c,$d) = (1))> in list context returned C<($a)>; now
it returns C<($a,$b,$d)>.  C<(($a,$b,$c) = (1))> is unchanged: it still
returns C<($a,$b,$c)>.  This can be seen in the following:

    sub inc { $_++ for @_ }
    inc(($a,$b,@c,$d) = (10))

Formerly, the values of C<($a,$b,$d)> would be left as C<(11,undef,undef)>;
now they are C<(11,1,1)>.

=item *

[perl 129903]

The basic problem is that code like this: /(?{ s!!! })/ can trigger infinite
recursion on the C stack (not the normal perl stack) when the last successful
pattern in scope is itself.  Since the C stack overflows this manifests as an
untrappable error/segfault, which then kills perl.

We avoid the segfault by simply forbidding the use of the empty pattern when it
would resolve to the currently executing pattern.

=item *

[perl 128997] Avoid reading beyond the end of the line buffer when there's a
short UTF-8 character at the end.

=item *

[perl 129950] fix firstchar bitmap under utf8 with prefix optimisation.

=item *

[perl 129954] Carp/t/arg_string.t: be liberal in f/p formats.

=item *

[perl 129928] make do "a\0b" fail silently instead of throwing.

=item *

[perl 129130] make chdir allocate the stack it needs.

=back

=head1 Known Problems

=over 4

=item *

Some modules have been broken by the L<context stack rework|/Internal Changes>.
These modules were relying on non-guaranteed implementation details in perl.
Their maintainers have been informed, and should contact perl5-porters for
advice if needed.  Below is a subset of these modules:

=over 4

=item * L<Algorithm::Permute>

=item * L<Coro>

L<Coro> and perl 5.22 were already incompatible due to a change in the perl,
and the reworking on the perl context stack creates a further incompatibility.
perl5-porters has L<discussed the issue on the mailing
list|http://www.nntp.perl.org/group/perl.perl5.porters/2016/05/msg236174.html>.

=item * L<Data::Alias>

=item * L<RPerl>

=item * L<Scope::Upper>

=item * L<TryCatch>

=back

=item *

The module L<lexical::underscore> no longer works on Perl 5.24, because perl
no longer has a lexical C<$_>!

=item *

C<mod_perl> has been patched for compatibility for v5.22 and later but no
release has been made.  The relevant patch (and other changes) can be found in
their source code repository, L<mirrored at
GitHub|https://github.com/apache/mod_perl/commit/82827132efd3c2e25cc413c85af61bb63375da6e>.

=back

=head1 Errata From Previous Releases

=over 4

=item *

Parsing bad POSIX charclasses no longer leaks memory.
L<[perl #128313]|https://rt.perl.org/Public/Bug/Display.html?id=128313>

=item *

Fixed issues with recursive regexes.  The behavior was fixed in Perl 5.24.
L<[perl #126182]|https://rt.perl.org/Public/Bug/Display.html?id=126182>

=back

=head1 Obituary

Jon Portnoy (AVENJ), a prolific Perl author and admired Gentoo community
member, has passed away on August 10, 2016.  He will be remembered and
missed by all those who he came in contact with, and enriched with his
intellect, wit, and spirit.

It is with great sadness that we also note Kip Hampton's passing.  Probably
best known as the author of the Perl & XML column on XML.com, he was a
core contributor to AxKit, an XML server platform that became an Apache
Foundation project.  He was a frequent speaker in the early days at
OSCON, and most recently at YAPC::NA in Madison.  He was frequently on
irc.perl.org as `ubu`, generally in the #axkit-dahut community, the
group responsible for YAPC::NA Asheville in 2011.

Kip and his constant contributions to the community will be greatly
missed.

=head1 Acknowledgements

Perl 5.26.0 represents approximately 12 months of development since Perl 5.24.0
and contains approximately 370,000 lines of changes across 2,600 files from 86
authors.

Excluding auto-generated files, documentation and release tools, there were
approximately 230,000 lines of changes to 1,800 .pm, .t, .c and .h files.

Perl continues to flourish into its third decade thanks to a vibrant community
of users and developers.  The following people are known to have contributed the
improvements that became Perl 5.26.0:

Aaron Crane, Abigail, Ævar Arnfjörð Bjarmason, Alex Vandiver, Andreas
König, Andreas Voegele, Andrew Fresh, Andy Lester, Aristotle Pagaltzis, Chad
Granum, Chase Whitener, Chris 'BinGOs' Williams, Chris Lamb, Christian Hansen,
Christian Millour, Colin Newell, Craig A. Berry, Dagfinn Ilmari Mannsåker, Dan
Collins, Daniel Dragan, Dave Cross, Dave Rolsky, David Golden, David H.
Gutteridge, David Mitchell, Dominic Hargreaves, Doug Bell, E. Choroba, Ed Avis,
Father Chrysostomos, François Perrad, Hauke D, H.Merijn Brand, Hugo van der
Sanden, Ivan Pozdeev, James E Keenan, James Raspass, Jarkko Hietaniemi, Jerry
D. Hedden, Jim Cromie, J. Nick Koston, John Lightsey, Karen Etheridge, Karl
Williamson, Leon Timmermans, Lukas Mai, Matthew Horsfall, Maxwell Carey, Misty
De Meo, Neil Bowers, Nicholas Clark, Nicolas R., Niko Tyni, Pali, Paul
Marquess, Peter Avalos, Petr Písař, Pino Toscano, Rafael Garcia-Suarez, Reini
Urban, Renee Baecker, Ricardo Signes, Richard Levitte, Rick Delaney, Salvador
Fandiño, Samuel Thibault, Sawyer X, Sébastien Aperghis-Tramoni, Sergey
Aleynikov, Shlomi Fish, Smylers, Stefan Seifert, Steffen Müller, Stevan
Little, Steve Hay, Steven Humphrey, Sullivan Beck, Theo Buehler, Thomas Sibley,
Todd Rinaldo, Tomasz Konojacki, Tony Cook, Unicode Consortium, Yaroslav Kuzmin,
Yves Orton, Zefram.

The list above is almost certainly incomplete as it is automatically generated
from version control history.  In particular, it does not include the names of
the (very much appreciated) contributors who reported issues to the Perl bug
tracker.

Many of the changes included in this version originated in the CPAN modules
included in Perl's core.  We're grateful to the entire CPAN community for
helping Perl to flourish.

For a more complete list of all of Perl's historical contributors, please see
the F<AUTHORS> file in the Perl source distribution.

=head1 Reporting Bugs

If you find what you think is a bug, you might check the articles recently
posted to the comp.lang.perl.misc newsgroup and the perl bug database at
L<https://rt.perl.org/> .  There may also be information at
L<http://www.perl.org/> , the Perl Home Page.

If you believe you have an unreported bug, please run the L<perlbug> program
included with your release.  Be sure to trim your bug down to a tiny but
sufficient test case.  Your bug report, along with the output of C<perl -V>,
will be sent off to perlbug@perl.org to be analysed by the Perl porting team.

If the bug you are reporting has security implications which make it
inappropriate to send to a publicly archived mailing list, then see
L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION>
for details of how to report the issue.

=head1 SEE ALSO

The F<Changes> file for an explanation of how to view exhaustive details on
what changed.

The F<INSTALL> file for how to build Perl.

The F<README> file for general stuff.

The F<Artistic> and F<Copying> files for copyright information.

=cut