3 # This is written in a peculiar style, since we're trying to avoid
4 # most of the constructs we'll be testing for. (This comment is
5 # probably obsolete on the avoidance side, though still current
6 # on the peculiarity side.)
8 # t/TEST and t/harness need to share code. The logical way to do this would be
9 # to have the common code in a file both require or use. However, t/TEST needs
10 # to still work, to generate test results, even if require isn't working, so
11 # we cannot do that. t/harness has no such restriction, so it is quite
12 # acceptable to have it require t/TEST.
14 # In which case, we need to stop t/TEST actually running tests, as all
15 # t/harness needs are its subroutines.
17 # If we're doing deparse tests, ignore failures for these
20 # And skip even running these
23 # directories with special sets of test switches
28 '../ext/File-Glob/t' => '-I.. -MTestInit', # FIXME - tests assume t/
31 # "not absolute" is the default, as it saves some fakery within TestInit
32 # which can perturb tests, and takes CPU. Working with the upstream author of
33 # any of these, to figure out how to remove them from this list, considered
36 '../cpan/Archive-Tar' => 1,
37 '../cpan/AutoLoader' => 1,
39 '../cpan/Devel-PPPort' => 1,
40 '../cpan/Encode' => 1,
41 '../cpan/ExtUtils-Command' => 1,
42 '../cpan/ExtUtils-Constant' => 1,
43 '../cpan/ExtUtils-Install' => 1,
44 '../cpan/ExtUtils-MakeMaker' => 1,
45 '../cpan/ExtUtils-Manifest' => 1,
46 '../cpan/File-Fetch' => 1,
47 '../cpan/IPC-Cmd' => 1,
48 '../cpan/IPC-SysV' => 1,
49 '../cpan/Locale-Codes' => 1,
50 '../cpan/Module-Load' => 1,
51 '../cpan/Module-Load-Conditional' => 1,
52 '../cpan/Parse-CPAN-Meta' => 1,
53 '../cpan/Pod-Simple' => 1,
54 '../cpan/Test-Simple' => 1,
55 '../cpan/podlators' => 1,
57 '../dist/ExtUtils-ParseXS' => 1,
58 '../dist/Tie-File' => 1,
62 ('../cpan/B-Debug' => 1,
63 '../cpan/Compress-Raw-Bzip2' => 1,
64 '../cpan/Compress-Raw-Zlib' => 1,
65 '../cpan/Devel-PPPort' => 1,
66 '../cpan/Getopt-Long' => 1,
67 '../cpan/IO-Compress' => 1,
68 '../cpan/MIME-Base64' => 1,
69 '../cpan/parent' => 1,
70 '../cpan/Parse-CPAN-Meta' => 1,
71 '../cpan/Pod-Simple' => 1,
72 '../cpan/podlators' => 1,
73 '../cpan/Test-Simple' => 1,
74 '../cpan/Tie-RefHash' => 1,
75 '../cpan/Unicode-Collate' => 1,
76 '../cpan/Unicode-Normalize' => 1,
79 # delete env vars that may influence the results
80 # but allow override via *_TEST env var if wanted
81 # (e.g. PERL5OPT_TEST=-d:NYTProf)
82 my @bad_env_vars = qw(
83 PERL5LIB PERLLIB PERL5OPT
84 PERL_YAML_BACKEND PERL_JSON_BACKEND
87 for my $envname (@bad_env_vars) {
88 my $override = $ENV{"${envname}_TEST"};
89 if (defined $override) {
90 warn "$0: $envname=$override\n";
91 $ENV{$envname} = $override;
94 delete $ENV{$envname};
98 # Location to put the Valgrind log.
117 # for testing TEST only
118 #BEGIN { require '../lib/strict.pm'; "strict"->import() };
119 #BEGIN { require '../lib/warnings.pm'; "warnings"->import() };
121 # remove empty elements due to insertion of empty symbols via "''p1'" syntax
122 @ARGV = grep($_,@ARGV) if $^O eq 'VMS';
123 our $show_elapsed_time = $ENV{HARNESS_TIMER} || 0;
125 # Cheesy version of Getopt::Std. We can't replace it with that, because we
126 # can't rely on require working.
129 foreach my $idx (0..$#ARGV) {
130 push( @argv, $ARGV[$idx] ), next unless $ARGV[$idx] =~ /^-(\S+)$/;
131 $::benchmark = 1 if $1 eq 'benchmark';
132 $::core = 1 if $1 eq 'core';
133 $::verbose = 1 if $1 eq 'v';
134 $::torture = 1 if $1 eq 'torture';
135 $::with_utf8 = 1 if $1 eq 'utf8';
136 $::with_utf16 = 1 if $1 eq 'utf16';
137 $::taintwarn = 1 if $1 eq 'taintwarn';
138 if ($1 =~ /^deparse(,.+)?$/) {
140 $::deparse_opts = $1;
141 _process_deparse_config();
147 chdir 't' if -f 't/TEST';
148 if (-f 'TEST' && -f 'harness' && -d '../lib') {
152 die "You need to run \"make test\" first to set things up.\n"
153 unless -e 'perl' or -e 'perl.exe' or -e 'perl.pm';
155 # check leakage for embedders
156 $ENV{PERL_DESTRUCT_LEVEL} = 2 unless exists $ENV{PERL_DESTRUCT_LEVEL};
157 # check existence of all symbols
158 $ENV{PERL_DL_NONLAZY} = 1 unless exists $ENV{PERL_DL_NONLAZY};
160 $ENV{EMXSHELL} = 'sh'; # For OS/2
162 if ($show_elapsed_time) { require Time::HiRes }
163 my %timings = (); # testname => [@et] pairs if $show_elapsed_time.
165 # Roll your own File::Find!
166 sub _find_tests { our @found=(); push @ARGV, _find_files('\.t$', $_[0]) }
168 my($patt, @dirs) = @_;
169 for my $dir (@dirs) {
170 opendir DIR, $dir or die "Trouble opening $dir: $!";
171 foreach my $f (sort { $a cmp $b } readdir DIR) {
174 my $fullpath = "$dir/$f";
177 _find_files($patt, $fullpath);
178 } elsif ($f =~ /$patt/) {
179 push @found, $fullpath;
187 # Scan the text of the test program to find switches and special options
188 # we might need to apply.
190 my($test, $type) = @_;
192 open(my $script, "<", $test) or die "Can't read $test.\n";
193 my $first_line = <$script>;
195 $first_line =~ tr/\0//d if $::with_utf16;
198 if ($first_line =~ /#!.*\bperl.*\s-\w*([tT])/) {
202 # not all tests are expected to pass with this option
210 if ($type eq 'deparse') {
211 # Look for #line directives which change the filename
213 $file_opts = $file_opts . ",-f$3$4"
214 if /^#\s*line\s+(\d+)\s+((\w+)|"([^"]+)")/;
225 $test =~ /^(.+)\/[^\/]+/;
227 my $testswitch = $dir_to_switch{$dir};
228 if (!defined $testswitch) {
229 if ($test =~ s!^(\.\./(cpan|dist|ext)/[^/]+)/t!t!) {
231 $return_dir = '../../t';
233 $perl = '../../t/perl';
234 $testswitch = "-I../.. -MTestInit=U2T";
235 if ($2 eq 'cpan' || $2 eq 'dist') {
237 $testswitch = $testswitch . ',A';
239 if ($temp_no_core{$run_dir}) {
240 $testswitch = $testswitch . ',NC';
243 } elsif ($test =~ m!^\.\./lib!) {
244 $testswitch = '-I.. -MTestInit=U1'; # -T will remove . from @INC
246 $testswitch = '-I.. -MTestInit'; # -T will remove . from @INC
250 my $utf8 = ($::with_utf8 || $::with_utf16) ? "-I$lib -Mutf8" : '';
257 return_dir => $return_dir,
258 testswitch => $testswitch,
268 my($options, $type) = @_;
270 my $test = $options->{test};
273 if ($type eq 'deparse') {
274 my $perl = "$options->{perl} $options->{testswitch}";
275 my $lib = $options->{lib};
278 "$perl $options->{switch} -I$lib -MO=-qq,Deparse,-sv1.,".
279 "-l$::deparse_opts$options->{file} ".
281 "&& $perl $options->{switch} -I$lib $test.dp"
284 elsif ($type eq 'perl') {
285 my $perl = $options->{perl};
286 my $redir = $^O eq 'VMS' ? '2>&1' : '';
288 if ($ENV{PERL_VALGRIND}) {
289 my $perl_supp = $options->{return_dir} ? "$options->{return_dir}/perl.supp" : "perl.supp";
290 my $valgrind_exe = $ENV{VALGRIND} // 'valgrind';
291 if ($options->{run_dir}) {
292 $Valgrind_Log = "$options->{run_dir}/$Valgrind_Log";
294 my $vg_opts = $ENV{VG_OPTS}
295 // "--log-file=$Valgrind_Log "
296 . "--suppressions=$perl_supp --leak-check=yes "
297 . "--leak-resolution=high --show-reachable=yes "
298 . "--num-callers=50 --track-origins=yes";
299 # Force logging if not asked for (so cachegrind reporting works below)
300 if ($vg_opts !~ /--log-file/) {
301 $vg_opts = "--log-file=$Valgrind_Log $vg_opts";
303 $perl = "$valgrind_exe $vg_opts $perl";
306 my $args = "$options->{testswitch} $options->{switch} $options->{utf8}";
307 $cmd = $perl . _quote_args($args) . " $test $redir";
315 if ($options->{run_dir}) {
316 my $run_dir = $options->{run_dir};
317 chdir $run_dir or die "Can't chdir to '$run_dir': $!";
320 # Remove previous valgrind output otherwise it will interfere
321 my $test = $options->{test};
323 (local $Valgrind_Log = "$test.valgrind-current") =~ s/^.*\///;
325 if ($ENV{PERL_VALGRIND} && -e $Valgrind_Log) {
327 or warn "$0: Failed to unlink '$Valgrind_Log': $!\n";
336 if ($options->{return_dir}) {
337 my $return_dir = $options->{return_dir};
339 or die "Can't chdir from '$options->{run_dir}' to '$return_dir': $!";
346 my ($test, $type) = @_;
348 my $options = _scan_test($test, $type);
349 # $test might have changed if we're in ext/Foo, so don't use it anymore
350 # from now on. Use $options->{test} instead.
352 _before_fork($options);
354 my $cmd = _cmd($options, $type);
356 open(my $results, "$cmd |") or print "can't run '$cmd': $!.\n";
358 _after_fork($options);
360 # Our environment may force us to use UTF-8, but we can't be sure that
361 # anything we're reading from will be generating (well formed) UTF-8
362 # This may not be the best way - possibly we should unset ${^OPEN} up
373 foreach (split(/\s+/,$args)) {
374 # In VMS protect with doublequotes because otherwise
375 # DCL will lowercase -- unless already doublequoted.
376 $_ = q(").$_.q(") if ($^O eq 'VMS') && !/^\"/ && length($_) > 0;
377 $argstring = $argstring . ' ' . $_;
383 return unless defined $_[0];
384 return map {$_, 1} split /\s+/, $_[0];
387 sub _tests_from_manifest {
388 my ($extensions, $known_extensions) = @_;
390 my %extensions = _populate_hash($extensions);
391 my %known_extensions = _populate_hash($known_extensions);
393 foreach (keys %known_extensions) {
394 $skip{$_} = 1 unless $extensions{$_};
398 my $mani = '../MANIFEST';
399 if (open(MANI, $mani)) {
401 if (m!^((?:cpan|dist|ext)/(\S+)/+(?:[^/\s]+\.t|test\.pl)|lib/\S+?(?:\.t|test\.pl))\s!) {
404 if (!$::core || $t =~ m!^lib/[a-z]!) {
405 if (defined $extension) {
406 $extension =~ s!/t(:?/\S+)*$!!;
407 # XXX Do I want to warn that I'm skipping these?
408 next if $skip{$extension};
409 my $flat_extension = $extension;
410 $flat_extension =~ s!-!/!g;
411 next if $skip{$flat_extension}; # Foo/Bar may live in Foo-Bar
414 push @results, $path;
415 $::path_to_name{$path} = $t;
421 warn "$0: cannot open $mani: $!\n";
427 # base first, as TEST bails out if that can't run
428 # then comp, to validate that require works
429 # then run, to validate that -M works
430 # then we know we can -MTestInit for everything else, making life simpler
431 foreach my $dir (qw(base comp run cmd io re opbasic op uni mro)) {
435 _find_tests('porting');
438 # Config.pm may be broken for make minitest. And this is only a refinement
439 # for skipping tests on non-default builds, so it is allowed to fail.
440 # What we want to to is make a list of extensions which we did not build.
441 my $configsh = '../config.sh';
442 my ($extensions, $known_extensions);
444 open FH, $configsh or die "Can't open $configsh: $!";
446 if (/^extensions=['"](.*)['"]$/) {
449 elsif (/^known_extensions=['"](.*)['"]$/) {
450 $known_extensions = $1;
453 if (!defined $known_extensions) {
454 warn "No known_extensions line found in $configsh";
456 if (!defined $extensions) {
457 warn "No extensions line found in $configsh";
460 # The "complex" constructions of list return from a subroutine, and push of
461 # a list, might fail if perl is really hosed, but they aren't needed for
462 # make minitest, and the building of extensions will likely also fail if
463 # something is that badly wrong.
464 push @ARGV, _tests_from_manifest($extensions, $known_extensions);
466 _find_tests('japh') if $::torture;
467 _find_tests('t/benchmark') if $::benchmark or $ENV{PERL_BENCHMARK};
468 _find_tests('bigmem') if $ENV{PERL_TEST_MEMORY};
473 _testprogs('deparse', '', @ARGV);
475 elsif ($::with_utf16) {
478 print STDERR "# ENDIAN $e BOM $b\n";
481 my $u = $a . "." . ($e ? "l" : "b") . "e" . ($b ? "b" : "");
482 my $f = $e ? "v" : "n";
486 if (open(U, ">$u")) {
487 print U pack("$f", 0xFEFF) if $b;
489 print U pack("$f*", unpack("C*", $_));
496 _testprogs('perl', '', @UARGV);
502 _testprogs('perl', '', @ARGV);
506 my ($type, $args, @tests) = @_;
508 print <<'EOT' if ($type eq 'deparse');
509 ------------------------------------------------------------------------------
511 ------------------------------------------------------------------------------
516 foreach my $t (@tests) {
517 unless (exists $::path_to_name{$t}) {
519 $::path_to_name{$t} = $tname;
523 foreach (@::path_to_name{@tests}) {
524 s/\.\w+\z/ /; # space gives easy doubleclick to select fname
526 $maxlen = $len if $len > $maxlen;
528 # + 3 : we want three dots between the test name and the "ok"
529 my $dotdotdot = $maxlen + 3 ;
530 my $grind_ct = 0; # count of non-empty valgrind reports
531 my $total_files = @tests;
533 my $tested_files = 0;
536 my $toolnm; # valgrind, cachegrind, perf
538 while (my $test = shift @tests) {
539 my ($test_start_time, @starttimes) = 0;
540 if ($show_elapsed_time) {
541 $test_start_time = Time::HiRes::time();
542 # times() reports usage by TEST, but we want usage of each
543 # testprog it calls, so record accumulated times now,
544 # subtract them out afterwards. Ideally, we'd take times
545 # in BEGIN/END blocks (giving better visibility of self vs
546 # children of each testprog), but that would require some
547 # IPC to send results back here, or a completely different
548 # collection scheme (Storable isn't tuned for incremental use)
554 if ($type eq 'deparse' && $test =~ $deparse_skips) {
557 my $te = $::path_to_name{$test} . '.'
558 x ($dotdotdot - length($::path_to_name{$test})) .' ';
560 if ($^O ne 'VMS') { # defer printing on VMS due to piping bug
565 (local $Valgrind_Log = "$test.valgrind-current") =~ s/^.*\///;
567 my $results = _run_test($test, $type);
573 my $trailing_leader = 0;
577 next if /^\s*$/; # skip blank lines
578 if (/^1..$/ && ($^O eq 'VMS')) {
579 # VMS pipe bug inserts blank lines.
581 if ($l2 =~ /^\s*$/) {
590 if ($trailing_leader) {
591 # shouldn't be anything following a postfix 1..n
592 $failure = 'FAILED--extra output after trailing 1..n';
595 if (/^1\.\.([0-9]+)( todo ([\d ]+))?/) {
597 $failure = 'FAILED--seen duplicate leader';
601 %todo = map { $_ => 1 } split / /, $3 if $3;
602 $totmax = $totmax + $max;
603 $tested_files = $tested_files + 1;
605 # 1..n appears at end of file
606 $trailing_leader = 1;
608 $failure = "FAILED--expected $max tests, saw $next";
618 if (/^(not )?ok(?: (\d+))?[^\#]*(\s*\#.*)?/) {
619 unless ($seen_leader) {
626 my($not, $num, $extra, $istodo) = ($1, $2, $3, 0);
627 $num = $next unless $num;
631 # SKIP is essentially the same as TODO for t/TEST
632 # this still conforms to TAP:
633 # http://testanything.org/wiki/index.php/TAP_specification
634 $extra and $istodo = $extra =~ /#\s*(?:TODO|SKIP)\b/;
635 $istodo = 1 if $todo{$num};
637 if( $not && !$istodo ) {
638 $failure = "FAILED at test $num";
643 $failure ="FAILED--expected test $next, saw test $num";
647 elsif (/^Bail out!\s*(.*)/i) { # magic words
648 die "FAILED--Further testing stopped" . ($1 ? ": $1\n" : ".\n");
651 # module tests are allowed extra output,
652 # because Test::Harness allows it
653 next if $test =~ /^\W*(cpan|dist|ext|lib)\b/;
654 $failure = "FAILED--unexpected output at test $next";
662 if (not defined $failure) {
663 $failure = 'FAILED--no leader found' unless $seen_leader;
666 _check_valgrind(\$toolnm, \$grind_ct, \$test);
668 if ($type eq 'deparse' && !$ENV{KEEP_DEPARSE_FILES}) {
671 if (not defined $failure and $next != $max) {
672 $failure="FAILED--expected $max tests, saw $next";
675 if( !defined $failure # don't mask a test failure
678 $failure = "FAILED--non-zero wait status: $?";
681 # Deparse? Should it have passed or failed?
682 if ($type eq 'deparse' && $test =~ $deparse_failures) {
684 # Wait, it didn't fail? Great news! Tell someone!
685 $failure = "FAILED--all tests passed but test should have failed";
687 # Bah, still failing. Mask it.
688 print "${te}skipped\n";
689 $tested_files = $tested_files - 1;
694 if (defined $failure) {
695 print "${te}$failure\n";
696 $::bad_files = $::bad_files + 1;
697 if ($test =~ /^base/ && ! defined &DynaLoader::boot_DynaLoader) {
698 # Die if running under minitest (no DynaLoader). Otherwise
699 # keep going, as we know that Perl basically works, or we
700 # would not have been able to actually compile it all the way.
701 die "Failed a basic test ($test) under minitest -- cannot continue.\n";
703 $failed_tests{$test} = 1;
707 my ($elapsed, $etms) = ("", 0);
708 if ( $show_elapsed_time ) {
709 $etms = (Time::HiRes::time() - $test_start_time) * 1000;
710 $elapsed = sprintf(" %8.0f ms", $etms);
712 my (@endtimes) = times;
713 $endtimes[$_] -= $starttimes[$_] for 0..$#endtimes;
714 splice @endtimes, 0, 2; # drop self/harness times
715 $_ *= 1000 for @endtimes; # and scale to ms
716 $timings{$test} = [$etms,@endtimes];
717 $elapsed .= sprintf(" %5.0f ms", $_) for @endtimes;
719 print "${te}ok$elapsed\n";
720 $good_files = $good_files + 1;
723 print "${te}skipped\n";
724 $tested_files = $tested_files - 1;
729 if ($::bad_files == 0) {
731 print "All tests successful.\n";
732 # XXX add mention of 'perlbug -ok' ?
735 die "FAILED--no tests were run for some reason.\n";
739 my $pct = $tested_files ? sprintf("%.2f", ($tested_files - $::bad_files) / $tested_files * 100) : "0.00";
740 my $s = $::bad_files == 1 ? "" : "s";
741 warn "Failed $::bad_files test$s out of $tested_files, $pct% okay.\n";
742 for my $test ( sort keys %failed_tests ) {
746 ### Since not all tests were successful, you may want to run some of
747 ### them individually and examine any diagnostic messages they produce.
748 ### See the INSTALL document's section on "make test".
750 warn <<'SHRDLU_2' if $good_files / $total_files > 0.8;
751 ### You have a good chance to get more information by running
753 ### in the 't' directory since most (>=80%) of the tests succeeded.
755 if (eval {require Config; import Config; 1}) {
756 if ($::Config{usedl} && (my $p = $::Config{ldlibpthname})) {
758 ### You may have to set your dynamic library search path,
759 ### $p, to point to the build directory:
761 if (exists $ENV{$p} && $ENV{$p} ne '') {
763 ### setenv $p `pwd`:\$$p; cd t; ./perl harness
764 ### $p=`pwd`:\$$p; export $p; cd t; ./perl harness
765 ### export $p=`pwd`:\$$p; cd t; ./perl harness
769 ### setenv $p `pwd`; cd t; ./perl harness
770 ### $p=`pwd`; export $p; cd t; ./perl harness
771 ### export $p=`pwd`; cd t; ./perl harness
775 ### for csh-style shells, like tcsh; or for traditional/modern
776 ### Bourne-style shells, like bash, ksh, and zsh, respectively.
781 my ($user,$sys,$cuser,$csys) = times;
782 my $tot = sprintf("u=%.2f s=%.2f cu=%.2f cs=%.2f scripts=%d tests=%d",
783 $user,$sys,$cuser,$csys,$tested_files,$totmax);
786 if (-d $show_elapsed_time) {
787 # HARNESS_TIMER = <a-directory>. Save timings etc to
788 # storable file there. NB: the test cds to ./t/, so
789 # relative path must account for that, ie ../../perf
790 # points to dir next to source tree.
793 $dt[5] += 1900; $dt[4] += 1; # fix year, month
794 my $fn = "$show_elapsed_time/".join('-', @dt[5,4,3,2,1]).".ttimes";
795 Storable::store({ perf => \%timings,
796 gather_conf_platform_info(),
799 print "wrote storable file: $fn\n";
803 _cleanup_valgrind(\$toolnm, \$grind_ct);
805 exit ($::bad_files != 0);
807 # Collect platform, config data that should allow comparing
808 # performance data between different machines. With enough data,
809 # and/or clever statistical analysis, it should be possible to
810 # determine the effect of config choices, more memory, etc
812 sub gather_conf_platform_info {
813 # currently rather quick & dirty, and subject to change
814 # for both content and format.
816 my (%conf, @platform) = ();
817 $conf{$_} = $Config::Config{$_} for
818 grep /cc|git|config_arg\d+/, keys %Config::Config;
819 if (-f '/proc/cpuinfo') {
820 open my $fh, '/proc/cpuinfo' or warn "$!: /proc/cpuinfo\n";
821 @platform = grep /name|cpu/, <$fh>;
822 chomp $_ for @platform;
824 unshift @platform, $^O;
828 platform => {cpu => \@platform,
829 mem => [ grep s/\s+/ /,
830 grep chomp, `free` ],
831 load => [ grep chomp, `uptime` ],
833 host => (grep chomp, `hostname -f`),
834 version => '0.03', # bump for conf, platform, or data collection changes
838 sub _check_valgrind {
839 return unless $ENV{PERL_VALGRIND};
841 my ($toolnm, $grind_ct, $test) = @_;
843 $$toolnm = $ENV{VALGRIND};
844 $$toolnm =~ s|.*/||; # keep basename
845 my @valgrind; # gets content of file
846 if (-e $Valgrind_Log) {
847 if (open(V, $Valgrind_Log)) {
851 warn "$0: Failed to open '$Valgrind_Log': $!\n";
854 if ($ENV{VG_OPTS} =~ /(cachegrind)/ or $$toolnm =~ /(perf)/) {
856 if ($$toolnm eq 'perf') {
857 # append perfs subcommand, not just stat
858 my ($sub) = split /\s/, $ENV{VG_OPTS};
861 if (rename $Valgrind_Log, "$$test.$$toolnm") {
864 warn "$0: Failed to create '$$test.$$toolnm': $!\n";
870 for my $i (0..$#valgrind) {
871 local $_ = $valgrind[$i];
872 if (/^==\d+== ERROR SUMMARY: (\d+) errors? /) {
873 $errors = $errors + $1; # there may be multiple error summaries
874 } elsif (/^==\d+== LEAK SUMMARY:/) {
875 for my $off (1 .. 4) {
876 if ($valgrind[$i+$off] =~
877 /(?:lost|reachable):\s+\d+ bytes in (\d+) blocks/) {
878 $leaks = $leaks + $1;
883 if ($errors or $leaks) {
884 if (rename $Valgrind_Log, "$$test.valgrind") {
885 $$grind_ct = $$grind_ct + 1;
887 warn "$0: Failed to create '$$test.valgrind': $!\n";
891 # Quiet wasn't asked for? Something may be amiss
892 if ($ENV{VG_OPTS} && $ENV{VG_OPTS} !~ /(^|\s)(-q|--quiet)(\s|$)/) {
893 warn "No valgrind output?\n";
896 if (-e $Valgrind_Log) {
898 or warn "$0: Failed to unlink '$Valgrind_Log': $!\n";
902 sub _cleanup_valgrind {
903 return unless $ENV{PERL_VALGRIND};
905 my ($toolnm, $grind_ct) = @_;
906 my $s = $$grind_ct == 1 ? '' : 's';
907 print "$$grind_ct valgrind report$s created.\n", ;
908 if ($$toolnm eq 'cachegrind') {
909 # cachegrind leaves a lot of cachegrind.out.$pid litter
910 # around the tree, find and delete them
911 unlink _find_files('cachegrind.out.\d+$',
912 qw ( ../t ../cpan ../ext ../dist/ ));
916 # Generate regexps of known bad filenames / skips from Porting/deparse-skips.txt
919 sub _process_deparse_config {
920 my @deparse_failures;
923 my $f = '../Porting/deparse-skips.txt';
926 if (!open($skips, '<', $f)) {
927 warn "Failed to find $f: $!\n";
932 if (/__DEPARSE_FAILURES__/) {
933 $in = \@deparse_failures; next;
934 } elsif (/__DEPARSE_SKIPS__/) {
935 $in = \@deparse_skips; next;
940 s/#.*$//; # Kill comments
941 s/\s+$//; # And trailing whitespace
948 for my $f (@deparse_failures, @deparse_skips) {
949 if ($f =~ m|/$|) { # Dir? Skip everything below it
956 $deparse_failures = join('|', @deparse_failures);
957 $deparse_failures = qr/^(?:$deparse_failures)$/;
959 $deparse_skips = join('|', @deparse_skips);
960 $deparse_skips = qr/^(?:$deparse_skips)$/;
963 # ex: set ts=8 sts=4 sw=4 noet: