3 # This file is used to create generic Makefile for cross-compile
4 # (borrowed from Makefile.SH)
5 # (now only small changes are done to establish cross-compilation)
6 # miniperl removed from here, as this is built on HOST
8 Makefile=Makefile-cross-$CROSS_NAME
10 . Cross/config-${CROSS_NAME}.sh
12 # H.Merijn Brand [17 Feb 2004]
13 # This comment is just to ensure that Configure will find variables that
14 # are removed/replaced in patches on blead, but are still needed in the
15 # 5.8.x, 5.6.x and 5.005.x maintenance tracks.
16 # metaconfig -m will scan all .SH files on this level (not deeper), and
17 # not in other subfolders. This file is as good as any .SH
22 # H.Merijn Brand [30 Oct 2004]
23 # Mentioned for the same reason for future reference
24 # #23434 $d_strlcat $d_strlcpy
26 : This forces SH files to create target in same directory as SH file.
27 : This is so that make depend always knows where to find SH derivatives.
29 */*) cd `expr X$0 : 'X\(.*\)/'` ;;
32 linklibperl='$(LIBPERL)'
33 shrpldflags='$(LDDLFLAGS)'
35 DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB'
38 # Prefix all runs of 'miniperl' and 'perl' with
39 # $ldlibpth so that ./perl finds *this* shared libperl.
40 case "$LD_LIBRARY_PATH" in
42 ldlibpth="LD_LIBRARY_PATH=`pwd`";;
44 ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";;
47 pldlflags="$cccdlflags"
49 case "${osname}${osvers}" in
52 lddlflags="-dynamic -undefined warning -framework System \
53 -compatibility_version 1 -current_version $patchlevel \
54 -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
57 shrpldflags="${ldflags} -dynamiclib \
58 -compatibility_version \
59 ${api_revision}.${api_version}.${api_subversion} \
61 ${revision}.${patchlevel}.${subversion} \
62 -install_name \$(shrpdir)/\$@"
70 netbsd*|freebsd[234]*|openbsd*|dragonfly*|bitrig*)
71 linklibperl="-L. -lperl"
74 linklibperl="-L. -lperl"
75 shrpldflags="$shrpldflags -Wl,--image-base,0x57000000"
78 shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
81 shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
83 3*) shrpldflags="$shrpldflags -e _nostart"
85 *) shrpldflags="$shrpldflags -b noentry"
88 shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
89 linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl"
92 linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl"
95 shrpldflags='-W l,XPLINK,dll'
96 linklibperl='libperl.x'
97 DPERL_EXTERNAL_GLOB=''
100 case "$ldlibpthname" in
108 eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\""
111 # Strip off any trailing :'s
112 ldlibpth=`echo $ldlibpth | sed 's/:*$//'`
118 *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;;
123 # If there is a pre-existing $libperl from a previous
124 # installation, Linux needs to use LD_PRELOAD to
125 # override the LD_LIBRARY_PATH setting. See the
126 # INSTALL file, under "Building a shared perl library".
127 # If there is no pre-existing $libperl, we don't need
128 # to do anything further.
129 if test -f $archlib/CORE/$libperl; then
131 cat <<'EOT' > preload
135 test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD"
139 ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl"
142 os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth"
149 static_ldflags='CCCDLFLAGS='
153 : Prepare dependency lists for Makefile.
156 for f in $dynamic_ext; do
157 : the dependency named here will never exist
158 base=`echo "$f" | sed 's/.*\///'`
159 this_target="lib/auto/$f/$base.$dlext"
160 dynamic_list="$dynamic_list $this_target"
162 : Parallel makes reveal that we have some interdependencies
164 Math/BigInt/FastCalc) extra_dep="$extra_dep
165 $this_target: lib/auto/List/Util/Util.$dlext" ;;
166 Unicode/Normalize) extra_dep="$extra_dep
167 $this_target: uni.data" ;;
172 for f in $static_ext; do
173 base=`echo "$f" | sed 's/.*\///'`
174 static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
178 for f in $nonxs_ext; do
179 base=`echo "$f" | sed 's/.*\///'`
180 nonxs_list="$nonxs_list ext/$f/pm_to_blib"
183 echo "Extracting $Makefile (with variable substitutions)"
184 $spitshell >$Makefile <<!GROK!THIS!
186 # This file is derived from $Makefile.SH. Any changes made here will
187 # be lost the next time you run Configure.
188 # $Makefile is used to generate $firstmakefile. The only difference
189 # is that $firstmakefile has the dependencies filled in at the end.
197 mallocsrc = $mallocsrc
198 mallocobj = $mallocobj
200 # NOTE: some systems don't grok "cp -f". XXX Configure test needed?
205 # The following are mentioned only to make metaconfig include the
206 # appropriate questions in Configure. If you want to change these,
207 # edit config.sh instead, or specify --man1dir=/wherever on
208 # installman commandline.
210 scriptdir = $scriptdir
211 shrpdir = $archlibexp/CORE
212 privlib = $installprivlib
218 # The following are used to build and install shared libraries for
220 LDDLFLAGS = $lddlflags
221 SHRPLDFLAGS = $shrpldflags
222 CCDLFLAGS = $ccdlflags
224 PLDLFLAGS = $pldlflags
226 LLIBPERL= $linklibperl
229 # Static targets are ordinarily built without CCCDLFLAGS. However,
230 # if building a shared libperl.so that might later be linked into
231 # another application, then it might be appropriate to also build static
232 # extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC
234 STATIC_LDFLAGS = $static_ldflags
236 # The following is used to include the current directory in
237 # the dynamic loader path you are building a shared libperl.
240 dynamic_ext = $dynamic_list
241 static_ext = $static_list
242 nonxs_ext = $nonxs_list
243 ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext)
244 DYNALOADER = DynaLoader\$(OBJ_EXT)
246 libs = $perllibs $cryptlib
248 public = perl\$(EXE_EXT) utilities translators
250 shellflags = $shellflags
252 # This is set to MAKE=$make if your $make command doesn't
256 # Mention $gmake here so it gets probed for by Configure.
258 # These variables may need to be manually set for non-Unix systems.
265 # If you're going to use valgrind and it can't be invoked as plain valgrind
266 # then you'll need to change this, or override it on the make command line.
269 FIRSTMAKEFILE = $firstmakefile
271 # Any special object files needed by this architecture, e.g. os2/os2.obj
274 .SUFFIXES: .c \$(OBJ_EXT) .i .s
279 # how to tr(anslate) newlines
286 INSTALLPREFIXEXP = $prefix
289 # not used by Makefile but by installperl;
290 # mentioned here so that metaconfig picks these up
294 case "${osname}:${osvers}" in
296 $spitshell >>$Makefile <<EOF
298 # Your locales are broken (osname $osname, osvers $osvers)
299 # and to avoid the numerous
300 # perl: warning: Setting locale failed.
301 # warnings during the build process we reset the locale variables.
310 $spitshell >>$Makefile <<!GROK!THIS!
311 CROSS_NAME = ${CROSS_NAME}
312 CROSS_LIB = xlib/${CROSS_NAME}
314 CCCMD = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$@\`
316 CCCMDSRC = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$<\`
320 ## In the following dollars and backticks do not need the extra backslash.
321 $spitshell >>$Makefile <<'!NO!SUBS!'
323 CONFIGPM = xlib/$(CROSS_NAME)/Config.pm
325 private = preplibrary $(CONFIGPM) $(CROSS_LIB)/Config.pod lib/buildcustomize.pl
327 shextract = Makefile cflags config.h makedepend \
328 makedir myconfig writemain pod/Makefile
330 addedbyconf = UU $(shextract) lib/lib.pm pstruct
332 # Unicode data files generated by mktables
333 unidatafiles = lib/unicore/Decomposition.pl lib/unicore/TestProp.pl \
334 lib/unicore/CombiningClass.pl lib/unicore/Name.pl \
335 lib/unicore/UCD.pl lib/unicore/Name.pm \
336 lib/unicore/Heavy.pl lib/unicore/mktables.lst
338 # Directories of Unicode data files generated by mktables
339 unidatadirs = lib/unicore/To lib/unicore/lib
341 h1 = EXTERN.h INTERN.h XSUB.h av.h xconfig.h cop.h cv.h dosish.h
342 h2 = embed.h form.h gv.h handy.h hv.h hv_func.h keywords.h mg.h op.h opcode.h
343 h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
344 h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
345 h5 = utf8.h warnings.h
346 h = $(h1) $(h2) $(h3) $(h4) $(h5)
348 c1 = av.c scope.c op.c doop.c doio.c dquote.c dump.c gv.c hv.c mg.c reentr.c mro_core.c perl.c
349 c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
350 c3 = taint.c time64.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c
351 c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c
354 c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c
356 obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dquote$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro_core$(OBJ_EXT)
357 obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) perl$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
358 obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) time64$(OBJ_EXT)
360 obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
368 -errchk=parentheses \
372 -erroff=E_ASSIGN_NARROW_CONV \
373 -erroff=E_BAD_PTR_CAST \
374 -erroff=E_BAD_PTR_CAST_ALIGN \
375 -erroff=E_BAD_PTR_INT_COMBINATION \
376 -erroff=E_BAD_SIGN_EXTEND \
377 -erroff=E_BLOCK_DECL_UNUSED \
378 -erroff=E_CASE_FALLTHRU \
379 -erroff=E_CONST_EXPR \
380 -erroff=E_CONSTANT_CONDITION \
381 -erroff=E_END_OF_LOOP_CODE_NOT_REACHED \
382 -erroff=E_EQUALITY_NOT_ASSIGNMENT \
383 -erroff=E_EXPR_NULL_EFFECT \
384 -erroff=E_FALSE_LOGICAL_EXPR \
385 -erroff=E_INCL_NUSD \
386 -erroff=E_LOOP_EMPTY \
387 -erroff=E_MAIN_PARAM \
388 -erroff=E_POINTER_TO_OBJECT \
389 -erroff=E_PTRDIFF_OVERFLOW \
390 -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \
391 -erroff=E_STATIC_UNUSED \
392 -erroff=E_TRUE_LOGICAL_EXPR
395 -I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \
396 -D__builtin_va_list=va_list \
397 -Dsigjmp_buf=jmp_buf \
421 $(CCCMD) -I$(CROSS_LIB) $(PLDLFLAGS) $*.c
424 $(CCCMDSRC) -E $*.c > $*.i
429 all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
431 @echo " Everything is up to date. Type '$(MAKE) test' to run test suite."
436 # This is now done by installman only if you actually want the man pages.
437 # @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
439 # Phony target to force checking subdirectories.
440 # Apparently some makes require an action for the FORCE target.
445 $spitshell >>$Makefile <<!GROK!THIS!
447 # We do a copy of the op.c instead of a symlink because gcc gets huffy
448 # if we have a symlink forest to another disk (it complains about too many
449 # levels of symbolic links, even if we have only two)
453 \$(CPS) op.c opmini.c
455 opmini\$(OBJ_EXT): opmini.c
456 \$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c
461 $spitshell >>$Makefile <<'!NO!SUBS!'
462 miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h
463 $(CCCMD) $(PLDLFLAGS) $*.c
465 perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
466 sh writemain $(DYNALOADER) $(static_ext) > perlmain.c
471 ;; # Let cygwin/Makefile.SHs do its work.
473 $spitshell >>$Makefile <<'!NO!SUBS!'
474 perlmain$(OBJ_EXT): perlmain.c
475 $(CCCMD) $(PLDLFLAGS) $*.c
480 $spitshell >>$Makefile <<'!NO!SUBS!'
481 # The file ext.libs is a list of libraries that must be linked in
482 # for static extensions, e.g. -lm -lgdbm, etc. The individual
483 # static extension Makefile's add to it.
484 ext.libs: $(static_ext)
485 -@test -f ext.libs || touch ext.libs
489 # How to build libperl. This is still rather convoluted.
490 # Load up custom Makefile.SH fragment for shared loading and executables:
493 Makefile_s="$osname/Makefile.SHs"
499 $spitshell >>$Makefile <<!GROK!THIS!
501 # In AIX we need to change this for building Perl itself from
502 # its earlier definition (which is for building external
503 # extensions *after* Perl has been built and installed)
504 CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'`
507 case "$useshrplib" in
509 $spitshell >>$Makefile <<'!NO!SUBS!'
511 LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT)
512 MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT)
514 $(LIBPERL_NONSHR): $(obj)
515 $(RMS) $(LIBPERL_NONSHR)
516 $(AR) rcu $(LIBPERL_NONSHR) $(obj)
518 $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT)
519 $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \
520 opmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS)
522 MINIPERLEXP = $(MINIPERL_NONSHR)
524 LIBPERLEXPORT = perl.exp
530 $spitshell >>$Makefile <<'!NO!SUBS!'
531 MINIPERLEXP = miniperl$(EXE_EXT)
533 PERLEXPORT = perl.exp
538 $spitshell >>$Makefile <<'!NO!SUBS!'
539 perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH)
540 ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp
545 $spitshell >>$Makefile <<'!NO!SUBS!'
546 MINIPERLEXP = miniperl
548 perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
549 ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def
555 if test -r $Makefile_s ; then
557 $spitshell >>$Makefile <<!GROK!THIS!
559 $Makefile: $Makefile_s
562 $spitshell >>$Makefile <<'!NO!SUBS!'
563 $(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT)
565 case "$useshrplib" in
567 $spitshell >>$Makefile <<'!NO!SUBS!'
569 $(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs)
573 $spitshell >>$Makefile <<'!NO!SUBS!'
574 rm -f libperl$(OBJ_EXT)
575 mv $@ libperl$(OBJ_EXT)
576 $(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
582 $spitshell >>$Makefile <<'!NO!SUBS!'
584 $(AR) rcu $(LIBPERL) $(obj) $(DYNALOADER)
585 @$(ranlib) $(LIBPERL)
589 $spitshell >>$Makefile <<'!NO!SUBS!'
591 # How to build executables.
593 # The $& notation tells Sequent machines that it can do a parallel make,
594 # and is harmless otherwise.
595 # The miniperl -w -MExporter line is a basic cheap test to catch errors
596 # before make goes on to run preplibrary and then MakeMaker on extensions.
597 # This is very handy because later errors are often caused by miniperl
598 # build problems but that's not obvious to the novice.
599 # The Module used here must not depend on Config or any extensions.
604 $spitshell >>$Makefile <<'!NO!SUBS!'
606 perl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
608 $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)dyn$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
609 $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
611 # Purify/Quantify Perls.
613 pureperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
614 $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
616 purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
617 $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
619 quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
620 $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
622 # Valgrind perl (currently Linux only)
624 perl.valgrind.config: config.sh
625 @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..."
626 @$(MAKE) perl.config.dashg
627 @echo "Checking usemymalloc='n' in config.sh..."
628 @grep "^usemymalloc=" config.sh
629 @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
630 @echo "And of course you have to have valgrind..."
631 $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1
633 # Third Degree Perl (Tru64 only)
636 @echo "Checking optimize='-g' in config.sh..."
637 @grep "^optimize=" config.sh
638 @egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1
640 perl.third.config: config.sh
641 @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..."
642 @$(MAKE) perl.config.dashg
643 @echo "Checking usemymalloc='n' in config.sh..."
644 @grep "^usemymalloc=" config.sh
645 @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
647 perl.third: /usr/bin/atom perl.third.config perl
648 atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl
649 @echo "Now you may run perl.third and then study perl.3log."
651 # Pixie Perls (Tru64 and IRIX only)
653 perl.pixie.config: config.sh
654 @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..."
655 @$(MAKE) perl.config.dashg
657 perl.pixie.atom: /usr/bin/atom perl
658 atom -tool pixie -L. -all -toolargs="-quiet" perl
660 perl.pixie.irix: perl
663 perl.pixie: /usr/bin/pixie perl.pixie.config perl
664 if test -x /usr/bin/atom; then \
665 $(MAKE) perl.pixie.atom; \
667 $(MAKE) perl.pixie.irix; \
669 @echo "Now you may run perl.pixie and then run pixie."
674 @echo "Checking optimize='-pg' in config.sh..."
675 @grep "^optimize=" config.sh
676 @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1
678 perl.gprof.config: config.sh
679 @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..."
680 @$(MAKE) perl.config.dashpg
682 perl.gprof: /usr/bin/gprof perl.gprof.config
684 $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl
685 @echo "Now you may run perl.gprof and then run gprof perl.gprof."
690 @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..."
691 @echo "Checking gccversion in config.sh..."
692 @grep "^gccversion=" config.sh
693 @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1
694 @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..."
695 @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..."
696 @grep "^ccflags=" config.sh
697 @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1
699 perl.gcov: perl.config.gcov
701 $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl
702 @echo "Now you may run perl.gcov and then run gcov some.c."
704 # Microperl. This is just a convenience thing if one happens to
705 # build also the full Perl and therefore the real big Makefile:
706 # usually one should manually explicitly issue the below command.
710 $(MAKE) -f Makefile.micro
716 $spitshell >>$Makefile <<'!NO!SUBS!'
719 preplibrary: miniperl $(CONFIGPM) lib/lib.pm $(PREPLIBRARY_LIBPERL)
722 makeppport: miniperl$(EXE_EXT) $(CONFIGPM)
723 $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport
725 $(CROSS_LIB)/Config.pod: config.sh miniperl configpm Porting/Glossary
726 $(LDLIBPTH) ./miniperl -Ilib configpm --cross=$(CROSS_NAME)
728 cp ext/re/re.pm $(LIBDIR)/
730 $(CONFIGPM): $(CROSS_LIB)/Config.pod xconfig.h
732 lib/re.pm: ext/re/re.pm
734 cp ext/re/re.pm lib/re.pm
736 lib/buildcustomize.pl: $(MINIPERL_EXE) write_buildcustomize.pl
737 $(MINIPERL) write_buildcustomize.pl >lib/buildcustomize.pl
739 unidatafiles $(unidatafiles): uni.data
741 uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables
742 cd lib/unicore && $(LDLIBPTH) ../../miniperl -I../../lib mktables -P ../../pod -maketest -makelist -p
743 # Commented out so always runs, mktables looks at far more files than we
744 # can in this makefile to decide if needs to run or not
748 -@test ! -f extra.pods || rm -f `cat extra.pods`
750 -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
751 nx=`echo $$x | sed -e "s/README\.//"`; \
752 cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \
753 echo "pod/perl"$$nx".pod" >> extra.pods ; \
755 -@rm -f pod/perlvms.pod
756 -@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
757 -@rm -f pod/perldelta.pod
758 -@test -f pod/perl5100delta.pod && cd pod && $(LNS) perl5100delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc
760 extras.make: perl$(EXE_EXT)
761 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
763 extras.test: perl$(EXE_EXT)
764 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
766 extras.install: perl$(EXE_EXT)
767 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
769 .PHONY: install install-strip install-all install-verbose install-silent \
770 no-install install.perl install.man install.html
772 META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm
773 $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta -y
775 META.json: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm
776 $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta -j
779 $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)"
782 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)"
785 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)"
788 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)"
791 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)"
793 # Set this to an empty string to avoid an attempt of rebuild before install
794 INSTALL_DEPENDENCE = all
796 install.perl: $(INSTALL_DEPENDENCE) installperl
797 $(LDLIBPTH) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
798 -@test ! -s extras.lst || $(MAKE) extras.install
800 install.man: all installman
801 $(LDLIBPTH) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
803 # XXX Experimental. Hardwired values, but useful for testing.
804 # Eventually Configure could ask for some of these values.
805 install.html: all installhtml
806 -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
807 $(LDLIBPTH) ./perl installhtml \
808 --podroot=. --podpath=. --recurse \
809 --htmldir=$(privlib)/html \
810 --htmlroot=$(privlib)/html \
811 --splithead=pod/perlipc \
812 --splititem=pod/perlfunc \
813 --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \
817 # I now supply perly.c with the kits, so the following section is
818 # used only if you force bison to run by saying
820 # You normally shouldn't remake perly.[ch].
825 @echo "run_byacc is obsolete; try 'make regen_perly' instead"
827 # this outputs perly.h, perly.act and perly.tab
831 # We don't want to regenerate perly.c and perly.h, but they might
832 # appear out-of-date after a patch is applied or a new distribution is
840 SYM = globvar.sym perlio.sym
842 SYMH = perlvars.h intrpvar.h
846 # The following files are generated automatically
847 # embed.pl: proto.h embed.h embedvar.h perlapi.h perlapi.c
848 # opcode.pl: opcode.h opnames.h pp_proto.h
849 # regcomp.pl: regnodes.h
850 # warnings.pl: warnings.h lib/warnings.pm
851 # feature.pl: feature.h lib/feature.pl
852 # The correct versions should be already supplied with the perl kit,
853 # in case you don't have perl available.
854 # To force them to be regenerated, run
856 # with your existing copy of perl
857 # (make regen_headers is kept for backwards compatibility)
859 AUTOGEN_FILES = opcode.h opnames.h pp_proto.h proto.h embed.h embedvar.h \
860 perlapi.h perlapi.c regnodes.h warnings.h lib/warnings.pm \
861 lib/feature.pm feature.h
863 .PHONY: regen_headers regen_all
865 regen regen_headers: FORCE
870 .PHONY: manisort manicheck
873 LC_ALL=C sort -fdc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \
874 LC_ALL=C sort -fdo MANIFEST MANIFEST)
877 perl Porting/manicheck
880 # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
881 # automatically get built. There should ordinarily be no need to change
882 # any of this part of makefile.
884 # The dummy dependency is a place holder in case $(dynamic_ext) or
885 # $(static_ext) is empty.
887 # DynaLoader may be needed for extensions that use Makefile.PL.
889 ###$(DYNALOADER).c: $(EXTDIR)/DynaLoader/dl_dld.xs $(CONFIGPM)
890 ### if not exist $(AUTODIR) mkdir $(AUTODIR)
891 ### cd $(EXTDIR)\$(*B)
892 ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) $(*B)_pm.PL
893 ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) XSLoader_pm.PL
895 ### $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
896 ### $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
897 ### cd $(EXTDIR)\$(*B)
898 ### $(XSUBPP) dl_win32.xs > $(*B).c
901 ###$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
902 ### $(COPY) dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
906 $(DYNALOADER): lib/buildcustomize.pl preplibrary FORCE
907 @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
909 d_dummy $(dynamic_ext): miniperl$(EXE_EXT) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE
910 @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
912 s_dummy $(static_ext): miniperl$(EXE_EXT) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE
913 @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
915 n_dummy $(nonxs_ext): miniperl$(EXE_EXT) lib/buildcustomize.pl preplibrary $(DYNALOADER) FORCE
916 @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
919 $spitshell >>$Makefile <<EOF
923 $spitshell >>$Makefile <<'!NO!SUBS!'
927 @eval `$(LDLIBPTH) ./perl -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR)
929 .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
930 realclean _realcleaner clobber _clobber \
931 distclean veryclean _verycleaner
935 realclean: _realcleaner _mopup
936 @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh"
939 -@rm -f Cross/run-* Cross/to-* Cross/from-*
940 rm -f config.sh cppstdin Policy.sh extras.lst
942 clobber: _realcleaner _mopup _clobber
946 # Like distclean but also removes emacs backups and *.orig.
947 veryclean: _verycleaner _mopup _clobber
948 -@rm -f Obsolete Wanted
950 # Do not 'make _mopup' directly.
952 rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c uudmap.h generate_uudmap$(EXE_EXT)
954 -@test -f extra.pods && rm -f `cat extra.pods`
955 -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
956 -rm -f perl.exp ext.libs extra.pods uni.data opmini.o
957 -rm -f perl.export perl.dll perl.libexp perl.map perl.def
958 -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
959 -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
960 -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
961 -rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
962 -rm -f perl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl
965 # Do not 'make _tidy' directly.
967 -cd pod; $(LDLIBPTH) $(MAKE) clean
968 -cd utils; $(LDLIBPTH) $(MAKE) clean
969 -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
970 $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \
974 -cd os2; rm -f Makefile
975 -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN)
976 -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN)
977 -@if test -f miniperl$(EXE_EXT) ; then \
978 for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
979 $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \
984 rm -f realclean.sh veryclean.sh
985 -@test ! -f ./miniperl$(EXE_EXT) || $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport --clean
987 # Some systems do not support "?", so keep these files separate.
989 -rm -f core.*perl.*.? t/core.perl.*.? .?*.c
990 rm -f core *perl.core t/core t/*perl.core core.* t/core.*
991 rm -f t/perl$(EXE_EXT) t/rantests
993 rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
994 rm -rf $(addedbyconf)
995 rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old
997 rm -rf $(unidatafiles) $(unidatadirs)
999 rm -f lib/.exists lib/*/.exists lib/*/*/.exists
1000 rm -f h2ph.man pstruct
1003 rm -rf lib/Encode lib/Compress lib/Hash lib/re
1004 rm -rf lib/IO/Compress lib/IO/Uncompress
1005 rm -f lib/ExtUtils/ParseXS/t/XSTest.c
1006 rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT)
1007 rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX)
1008 -rmdir lib/B lib/Data
1009 -rmdir lib/Filter/Util lib/IO/Socket
1010 -rmdir lib/List lib/MIME lib/Scalar lib/Sys
1011 -rmdir lib/threads lib/XS
1014 @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean
1015 @$(LDLIBPTH) $(MAKE) _cleaner2
1018 @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean
1019 @$(LDLIBPTH) $(MAKE) _cleaner2
1020 -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig
1025 lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c)
1029 splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles)
1031 # Need to unset during recursion to go out of loop.
1032 # The README below ensures that the dependency list is never empty and
1033 # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding.
1035 MAKEDEPEND = Makefile makedepend
1037 $(FIRSTMAKEFILE): README $(MAKEDEPEND)
1038 $(MAKE) depend MAKEDEPEND=
1040 config.h: config_h.SH config.sh
1041 $(SHELL) config_h.SH
1042 # TODO - improve following line
1043 cp config.h $(CROSS_LIB)/
1045 xconfig.h: config_h.SH Cross/config-$(CROSS_NAME).sh
1046 CONFIG_SH=Cross/config-$(CROSS_NAME).sh CONFIG_H=xconfig.h $(SHELL) config_h.SH
1047 #TODO $(LDLIBPTH) ./miniperl -Ilib -MCross=$(CROSS_NAME) config_h.PL "INST_VER=$(INST_VER)" "CORE_DIR=$(CROSS_LIB)" "CONFIG_H=xconfig.h"
1048 cp xconfig.h $(CROSS_LIB)/
1049 cp xconfig.h $(CROSS_LIB)/config.h
1051 # When done, touch perlmain.c so that it doesn't get remade each time.
1054 sh ./makedepend MAKE=$(MAKE)
1055 - test -s perlmain.c && touch perlmain.c
1057 # Cannot postpone this until $firstmakefile is ready ;-)
1058 makedepend: makedepend.SH config.sh
1061 .PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \
1062 test_tty test-tty _test_tty test_notty test-notty _test_notty \
1063 utest ucheck test.utf8 check.utf8 test.torture torturetest \
1064 test.utf16 check.utf16 utest.utf16 ucheck.utf16 \
1065 test.third check.third utest.third ucheck.third test_notty.third \
1066 test.deparse test_notty.deparse test_harness test_harness_notty \
1067 minitest coretest test.taintwarn
1069 # Cannot delegate rebuilding of t/perl to make
1070 # to allow interlaced test and minitest
1075 cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT))
1077 # Architecture-neutral stuff:
1079 test_prep_pre: preplibrary utilities $(nonxs_ext)
1081 test_prep: test_prep_pre miniperl$(EXE_EXT) $(unidatafiles) perl$(EXE_EXT) \
1082 $(dynamic_ext) $(TEST_PERL_DLL)
1083 PERL=./perl $(MAKE) _test_prep
1086 cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty
1089 cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS)
1091 # The second branch is for testing without a tty or controlling terminal,
1094 if (true </dev/tty) >/dev/null 2>&1; then \
1095 $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_tty ; \
1097 $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_notty ; \
1099 @echo "Ran tests" > t/rantests
1101 test check: test_prep
1102 PERL=./perl $(MAKE) _test
1105 PERL=./perl $(MAKE) _test_tty
1107 test_notty: test_prep
1108 PERL=./perl $(MAKE) _test_notty
1110 utest ucheck test.utf8 check.utf8: test_prep
1111 PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test
1114 PERL=./perl TEST_ARGS=-core $(MAKE) _test
1116 test-prep: test_prep
1120 test-notty: test_notty
1124 test.torture torturetest: test_prep
1125 PERL=./perl TEST_ARGS=-torture $(MAKE) _test
1127 # Targets for UTF16 testing:
1129 minitest.utf16: minitest.prep
1130 - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
1131 && $(LDLIBPTH) ./perl TEST -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
1133 test.utf16 check.utf16: test_prep
1134 PERL=./perl $(MAKE) TEST_ARGS=-utf16 _test
1136 utest.utf16 ucheck.utf16: test_prep
1137 PERL=./perl $(MAKE) TEST_ARGS="-utf8 -utf16" _test
1139 # Targets for valgrind testing:
1141 test_prep.valgrind: test_prep perl.valgrind
1142 PERL=./perl $(MAKE) _test_prep
1144 test.valgrind check.valgrind: test_prep perl.valgrind.config
1145 PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(MAKE) _test
1147 utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config
1148 PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test
1150 test_notty.valgrind: test_prep.valgrind perl.valgrind.config
1151 PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty
1153 # Targets for Third Degree testing.
1155 test_prep.third: test_prep perl.third
1156 PERL=./perl.third $(MAKE) _test_prep
1158 test.third check.third: test_prep.third perl.third
1159 PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 $(MAKE) _test
1161 utest.third ucheck.third: test_prep.third perl.third
1162 PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 TEST_ARGS=-utf8 $(MAKE) _test
1164 test_notty.third: test_prep.third perl.third
1165 PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty
1167 # Targets for Deparse testing.
1169 test.deparse: test_prep
1170 PERL=./perl TEST_ARGS=-deparse $(MAKE) _test
1172 test_notty.deparse: test_prep
1173 PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty
1175 # Targets to run the test suite with -t
1177 test.taintwarn: test_prep
1178 PERL=./perl TEST_ARGS=-taintwarn $(MAKE) _test
1181 -@test -f lib/lib.pm && test -f lib/Config.pm || \
1182 $(MAKE) lib/Config.pm lib/lib.pm $(unidatafiles)
1184 @echo "You may see some irrelevant test failures if you have been unable"
1185 @echo "to build lib/Config.pm, lib/lib.pm or the Unicode data files."
1188 # Can't depend on lib/Config.pm because that might be where miniperl
1190 minitest: miniperl$(EXE_EXT) minitest.prep
1191 - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
1192 && $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
1196 test_harness: test_prep
1197 PERL=./perl $(MAKE) TESTFILE=harness _test
1199 test_harness_notty: test_prep
1200 PERL=./perl HARNESS_NOTTY=1 $(MAKE) TESTFILE=harness _test
1202 # Handy way to run perlbug -ok without having to install and run the
1203 # installed perlbug. We don't re-run the tests here - we trust the user.
1204 # Please *don't* use this unless all tests pass.
1205 # If you want to report test failures, use "make nok" instead.
1207 .PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack
1210 $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)'
1213 $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok
1216 $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A
1218 okfilenack: utilities
1219 $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A
1222 $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)'
1225 $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok
1228 $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A
1230 nokfilenack: utilities
1231 $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
1233 .PHONY: clist hlist shlist
1236 echo $(c) | tr ' ' $(TRNL) >.clist
1239 echo $(h) | tr ' ' $(TRNL) >.hlist
1242 echo $(sh) | tr ' ' $(TRNL) >.shlist
1244 Makefile: Makefile.SH ./config.sh
1245 $(SHELL) Makefile.SH
1249 perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
1252 elc: emacs/cperl-mode.elc
1254 emacs/cperl-mode.elc: emacs/cperl-mode.el
1255 -cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el
1257 .PHONY: etags ctags tags
1261 TAGS: emacs/cperl-mode.elc
1264 # Let's hope make will not go into an infinite loop on case-insensitive systems
1265 # This may also fail if . is in the head of the path, since perl will
1268 perl emacs/e2ctags.pl TAGS > tags
1271 ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c *.c *.h
1273 # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
1274 # If this runs make out of memory, delete /usr/include lines.
1277 $eunicefix $Makefile
1278 $rm -f $firstmakefile
1280 # Now do any special processing required before building.
1285 echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2
1290 echo "'$osname' is an EBCDIC system I don't know that well." >&4
1294 '') echo "No parser files were regenerated. That's okay." >&2 ;;
1299 # ex: set ts=8 sts=4 sw=4 noet: