2 # Makefile to build perl on Windows using DMAKE.
4 # Microsoft Visual C++ 6.0 or later
5 # MinGW with gcc-3.2 or later
6 # Windows SDK 64-bit compiler and tools
8 # This is set up to build a perl.exe that runs off a shared library
9 # (perl519.dll). Also makes individual DLLs for the XS extensions.
13 ## Make sure you read README.win32 *before* you mess with anything here!
17 # Import everything from the environment like NMAKE does.
22 ## Build configuration. Edit the values below to suit your needs.
26 # Set these to wherever you want "dmake install" to put your
30 INST_TOP *= $(INST_DRV)\perl
33 # Uncomment if you want to build a 32-bit Perl using a 32-bit compiler
34 # on a 64-bit version of Windows.
38 # Comment this out if you DON'T want your perl installation to be versioned.
39 # This means that the new installation will overwrite any files from the
40 # old installation at the same INST_TOP location. Leaving it enabled is
41 # the safest route, as perl adds the extra version directory to all the
42 # locations it installs files to. If you disable it, an alternative
43 # versioned installation can be obtained by setting INST_TOP above to a
44 # path that includes an arbitrary version string.
49 # Comment this out if you DON'T want your perl installation to have
50 # architecture specific components. This means that architecture-
51 # specific files will be installed along with the architecture-neutral
52 # files. Leaving it enabled is safer and more flexible, in case you
53 # want to build multiple flavors of perl and install them together in
54 # the same location. Commenting it out gives you a simpler
55 # installation that is easier to understand for beginners.
57 #INST_ARCH *= \$(ARCHNAME)
60 # Uncomment this if you want perl to run
61 # $Config{sitelibexp}\sitecustomize.pl
62 # before anything else. This script can then be set up, for example,
63 # to add additional entries to @INC.
65 #USE_SITECUST *= define
68 # uncomment to enable multiple interpreters. This is need for fork()
69 # emulation and for thread support.
74 # Interpreter cloning/threads; now reasonably complete.
75 # This should be enabled to get the fork() emulation.
76 # This needs USE_MULTI above.
78 USE_ITHREADS *= define
81 # uncomment to enable the implicit "host" layer for all system calls
82 # made by perl. This needs USE_MULTI above.
83 # This is also needed to get fork().
88 # Comment out next assign to disable perl's I/O subsystem and use compiler's
89 # stdio for IO - depending on your compiler vendor and run time library you may
90 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
91 # You will also be unable to take full advantage of perl5.8's support for multiple
92 # encodings and may see lower IO performance. You have been warned.
96 # Comment this out if you don't want to enable large file support for
97 # some reason. Should normally only be changed to maintain compatibility
98 # with an older release of perl.
99 USE_LARGE_FILES *= define
102 # Uncomment this if you're building a 32-bit perl and want 64-bit integers.
103 # (If you're building a 64-bit perl then you will have 64-bit integers whether
104 # or not this is uncommented.)
105 # Note: This option is not supported in 32-bit MSVC60 builds.
106 #USE_64_BIT_INT *= define
109 # uncomment exactly one of the following
111 # Visual C++ 6.x (aka Visual C++ 98)
113 # Visual C++ .NET 2002/2003 (aka Visual C++ 7.x) (full version)
115 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
116 #CCTYPE *= MSVC70FREE
117 # Windows Server 2003 SP1 Platform SDK (April 2005)
119 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
121 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
122 #CCTYPE *= MSVC80FREE
123 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
125 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
126 #CCTYPE *= MSVC90FREE
127 # Visual C++ 2010 (aka Visual C++ 10.x) (full version)
129 # Visual C++ 2010 Express Edition (aka Visual C++ 10.x) (free version)
130 #CCTYPE = MSVC100FREE
131 # Visual C++ 2012 (aka Visual C++ 11.x) (full version)
133 # Visual C++ 2012 Express Edition (aka Visual C++ 11.x) (free version)
134 #CCTYPE = MSVC110FREE
135 # Visual C++ 2013 (aka Visual C++ 12.x) (full version)
137 # Visual C++ 2013 Express Edition (aka Visual C++ 12.x) (free version)
138 #CCTYPE = MSVC120FREE
139 # MinGW or mingw-w64 with gcc-3.2 or later
143 # uncomment next line if you want debug version of perl (big,slow)
144 # If not enabled, we automatically try to use maximum optimization
145 # with all compilers that are known to have a working optimizer.
150 # uncomment to enable linking with setargv.obj under the Visual C
151 # compiler. Setting this options enables perl to expand wildcards in
152 # arguments, but it may be harder to use alternate methods like
153 # File::DosGlob that are more powerful. This option is supported only with
156 #USE_SETARGV *= define
159 # set this if you wish to use perl's malloc
160 # WARNING: Turning this on/off WILL break binary compatibility with extensions
161 # you may have compiled with/without it. Be prepared to recompile all
162 # extensions if you change the default. Currently, this cannot be enabled
163 # if you ask for USE_IMP_SYS above.
165 #PERL_MALLOC *= define
168 # set this to enable debugging mstats
169 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
170 # be enabled without PERL_MALLOC as well.
172 #DEBUG_MSTATS *= define
175 # set this to additionally provide a statically linked perl-static.exe.
176 # Note that dynamic loading will not work with this perl, so you must
177 # include required modules statically using the STATIC_EXT or ALL_STATIC
178 # variables below. A static library perl519s.lib will also be created.
179 # Ordinary perl.exe is not affected by this option.
181 #BUILD_STATIC *= define
184 # in addition to BUILD_STATIC the option ALL_STATIC makes *every*
185 # extension get statically built
186 # This will result in a very large perl executable, but the main purpose
187 # is to have proper linking set so as to be able to create miscellaneous
188 # executables with different built-in extensions
190 #ALL_STATIC *= define
193 # set the install locations of the compiler include/libraries
194 # Running VCVARS32.BAT is *required* when using Visual C.
195 # Some versions of Visual C don't define MSVCDIR in the environment,
196 # so you may have to set CCHOME explicitly (spaces in the path name should
199 .IF "$(CCTYPE)" == "GCC"
206 # uncomment this if you are using x86_64-w64-mingw32 cross-compiler
207 # ie if your gcc executable is called 'x86_64-w64-mingw32-gcc'
208 # instead of the usual 'gcc'.
213 # Following sets $Config{incpath} and $Config{libpth}
216 .IF "$(GCCCROSS)" == "define"
217 CCINCDIR *= $(CCHOME)\x86_64-w64-mingw32\include
218 CCLIBDIR *= $(CCHOME)\x86_64-w64-mingw32\lib
219 CCDLLDIR *= $(CCLIBDIR)
221 CCINCDIR *= $(CCHOME)\include
222 CCLIBDIR *= $(CCHOME)\lib
223 CCDLLDIR *= $(CCHOME)\bin
227 # Additional compiler flags can be specified here.
229 BUILDOPT *= $(BUILDOPTEXTRA)
232 # This should normally be disabled. Enabling it will disable the File::Glob
233 # implementation of CORE::glob.
235 #BUILDOPT += -DPERL_EXTERNAL_GLOB
238 # Perl needs to read scripts in text mode so that the DATA filehandle
239 # works correctly with seek() and tell(), or around auto-flushes of
240 # all filehandles (e.g. by system(), backticks, fork(), etc).
242 # The current version on the ByteLoader module on CPAN however only
243 # works if scripts are read in binary mode. But before you disable text
244 # mode script reading (and break some DATA filehandle functionality)
245 # please check first if an updated ByteLoader isn't available on CPAN.
247 BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
250 # specify semicolon-separated list of extra directories that modules will
251 # look for libraries (spaces in path names need not be quoted)
256 # set this to point to cmd.exe (only needed if you use some
257 # alternate shell that doesn't grok cmd.exe style commands)
259 #SHELL *= g:\winnt\system32\cmd.exe
262 # set this to your email address (perl will guess a value from
263 # from your loginname and your hostname, which may not be right)
268 ## Build configuration ends.
271 ##################### CHANGE THESE ONLY IF YOU MUST #####################
274 DEBUG_MSTATS *= undef
276 USE_SITECUST *= undef
278 USE_ITHREADS *= undef
281 USE_LARGE_FILES *= undef
282 USE_64_BIT_INT *= undef
284 .IF "$(USE_IMP_SYS)" == "define"
288 .IF "$(PERL_MALLOC)" == "undef"
292 .IF "$(DEBUG_MSTATS)" == "define"
293 BUILDOPT += -DPERL_DEBUGGING_MSTATS
296 .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
300 .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
304 .IF "$(USE_SITECUST)" == "define"
305 BUILDOPT += -DUSE_SITECUSTOMIZE
308 .IF "$(USE_MULTI)" != "undef"
309 BUILDOPT += -DPERL_IMPLICIT_CONTEXT
312 .IF "$(USE_IMP_SYS)" != "undef"
313 BUILDOPT += -DPERL_IMPLICIT_SYS
316 PROCESSOR_ARCHITECTURE *= x86
319 # When we are running from a 32bit cmd.exe on AMD64 then
320 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
322 .IF "$(PROCESSOR_ARCHITEW6432)" != ""
323 PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
325 .ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
332 .IF "$(WIN64)" == "define"
333 USE_64_BIT_INT = define
336 # Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because
337 # both link against MSVCRT.dll (which is part of Windows itself) and
338 # not against a compiler specific versioned runtime.
339 .IF "$(WIN64)" == "define" && "$(CCTYPE)" == "MSVC60"
343 # Disable the 64-bit-int option for (32-bit) MSVC60 builds since that compiler
344 # does not support it.
345 .IF "$(CCTYPE)" == "MSVC60"
346 USE_64_BIT_INT != undef
349 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
350 .IF "$(ARCHITECTURE)" == "AMD64"
353 .IF "$(ARCHITECTURE)" == "IA64"
357 .IF "$(USE_MULTI)" == "define"
358 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
360 .IF "$(USE_PERLIO)" == "define"
361 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
363 ARCHNAME = MSWin32-$(ARCHITECTURE)
367 .IF "$(USE_PERLIO)" == "define"
368 BUILDOPT += -DUSE_PERLIO
371 .IF "$(USE_ITHREADS)" == "define"
372 ARCHNAME !:= $(ARCHNAME)-thread
375 .IF "$(WIN64)" != "define"
376 .IF "$(USE_64_BIT_INT)" == "define"
377 ARCHNAME !:= $(ARCHNAME)-64int
381 ARCHDIR = ..\lib\$(ARCHNAME)
382 COREDIR = ..\lib\CORE
383 AUTODIR = ..\lib\auto
392 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
393 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
394 INST_LIB = $(INST_TOP)$(INST_VER)\lib
395 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
396 INST_COREDIR = $(INST_ARCHLIB)\CORE
397 INST_HTML = $(INST_TOP)$(INST_VER)\html
400 # Programs to compile, build .lib files and link
405 .IF "$(CCTYPE)" == "GCC"
407 .IF "$(GCCCROSS)" == "define"
408 ARCHPREFIX = x86_64-w64-mingw32-
411 CC = $(ARCHPREFIX)gcc
412 LINK32 = $(ARCHPREFIX)g++
413 LIB32 = $(ARCHPREFIX)ar rc
414 IMPLIB = $(ARCHPREFIX)dlltool
415 RSC = $(ARCHPREFIX)windres
425 INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
427 .IF "$(WIN64)" == "define"
428 DEFINES += -DWIN64 -DCONSERVATIVE
430 LOCDEFS = -DPERLDLL -DPERL_CORE
434 # Current releases of MinGW 5.1.4 (as of 11-Aug-2009) will fail to link
435 # correctly if -lmsvcrt is specified explicitly.
441 -lmoldname -lkernel32 -luser32 -lgdi32 \
442 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
443 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
444 -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
446 .IF "$(CFG)" == "Debug"
447 OPTIMIZE = -g -O2 -DDEBUGGING
455 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
456 LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
461 BUILDOPT += -fno-strict-aliasing -mms-bitfields
465 # All but the free version of VC++ 7.x can load DLLs on demand. Makes the test
466 # suite run in about 10% less time.
467 .IF "$(CCTYPE)" != "MSVC70FREE"
468 DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib
471 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
472 # DLLs. These either need copying everywhere with the binaries, or else need
473 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
474 # simplicity, embed them if they exist (and delete them afterwards so that they
475 # don't get installed too).
476 EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
477 if exist $@.manifest del $@.manifest
478 EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
479 if exist $@.manifest del $@.manifest
481 # Most relevant compiler-specific options fall into two groups:
482 # either pre-MSVC80 or MSVC80 onwards, so define a macro for this.
483 .IF "$(CCTYPE)" == "MSVC60" || \
484 "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC70FREE"
492 LIB32 = $(LINK32) -lib
499 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
500 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
501 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT
502 LOCDEFS = -DPERLDLL -DPERL_CORE
508 .IF "$(CFG)" == "Debug"
509 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
512 # -O1 yields smaller code, which turns out to be faster than -O2 on x86 and x64
513 OPTIMIZE = -O1 -MD -Zi -DNDEBUG
514 # we enable debug symbols in release builds also
515 LINK_DBG = -debug -opt:ref,icf
516 # you may want to enable this if you want COFF symbols in the executables
517 # in addition to the PDB symbols. The default Dr. Watson that ships with
518 # Windows can use the the former but not latter. The free WinDbg can be
519 # installed to get better stack traces from just the PDB symbols, so we
520 # avoid the bloat of COFF symbols by default.
521 #LINK_DBG = $(LINK_DBG) -debugtype:both
522 .IF "$(CCTYPE)" != "MSVC60"
523 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
530 .IF "$(WIN64)" == "define"
531 DEFINES += -DWIN64 -DCONSERVATIVE
532 OPTIMIZE += -fp:precise
535 # For now, silence warnings from VC++ 8.x onwards about "unsafe" CRT functions
536 # and POSIX CRT function names being deprecated.
537 .IF "$(PREMSVC80)" == "undef"
538 DEFINES += -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
541 # In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to
542 # 64-bit, even in 32-bit mode. It also provides the _USE_32BIT_TIME_T
543 # preprocessor option to revert back to the old functionality for
544 # backward compatibility. We define this symbol here for older 32-bit
545 # compilers only (which aren't using it at all) for the sole purpose
546 # of getting it into $Config{ccflags}. That way if someone builds
547 # Perl itself with e.g. VC6 but later installs an XS module using VC8
548 # the time_t types will still be compatible.
549 .IF "$(WIN64)" == "undef"
550 .IF "$(PREMSVC80)" == "define"
551 BUILDOPT += -D_USE_32BIT_TIME_T
556 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
557 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
558 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
559 version.lib odbc32.lib odbccp32.lib comctl32.lib
561 # The 64 bit Windows Server 2003 SP1 SDK compilers link against MSVCRT.dll, which
562 # doesn't include the buffer overrun verification code used by the /GS switch.
563 # Since the code links against libraries that are compiled with /GS, this
564 # "security cookie verification" code must be included via bufferoverflow.lib.
565 .IF "$(WIN64)" == "define" && "$(CCTYPE)" == "SDK2003SP1"
566 LIBBASEFILES += bufferoverflowU.lib
569 LIBFILES = $(LIBBASEFILES) $(LIBC)
571 EXTRACFLAGS = -nologo -GF -W3
572 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
573 $(PCHFLAGS) $(OPTIMIZE)
574 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
575 -libpath:"$(INST_COREDIR)" \
576 -machine:$(PROCESSOR_ARCHITECTURE)
577 LIB_FLAGS = $(LIB_FLAGS) -nologo
584 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
586 .IF "$(PREMSVC80)" == "undef"
587 LINK_FLAGS += "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'"
589 RSC_FLAGS = -DINCLUDE_MANIFEST
593 # used to allow local linking flags that are not propogated into Config.pm,
597 BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
599 #################### do not edit below this line #######################
600 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
602 # Some old dmakes (including Sarathy's one at
603 # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip)
604 # don't support logical OR (||) or logical AND (&&) in conditional
605 # expressions and hence don't process this makefile correctly. Determine
606 # whether this is the case so that we can give the user an error message.
623 .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
626 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
629 $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
635 .IF "$(CCTYPE)" == "GCC"
636 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
637 $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
639 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
640 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
645 .IF "$(CCTYPE)" == "GCC"
646 $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -D INCLUDE_MANIFEST -i $< -o $@
648 $(RSC) -i.. -DINCLUDE_MANIFEST $<
653 MINIPERL = ..\miniperl.exe
655 PERLEXE = ..\perl.exe
656 WPERLEXE = ..\wperl.exe
657 PERLEXESTATIC = ..\perl-static.exe
658 STATICDIR = .\static.tmp
659 GLOBEXE = ..\perlglob.exe
660 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
662 GENUUDMAP = ..\generate_uudmap.exe
663 .IF "$(BUILD_STATIC)" == "define" || "$(ALL_STATIC)" == "define"
669 # Unicode data files generated by mktables
670 UNIDATAFILES = ..\lib\unicore\Decomposition.pl ..\lib\unicore\TestProp.pl \
671 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
672 ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm \
673 ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst
675 # Directories of Unicode data files generated by mktables
676 UNIDATADIR1 = ..\lib\unicore\To
677 UNIDATADIR2 = ..\lib\unicore\lib
679 PERLEXE_MANIFEST= .\perlexe.manifest
680 PERLEXE_ICO = .\perlexe.ico
681 PERLEXE_RES = .\perlexe.res
684 # Nominate a target which causes extensions to be re-built
685 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
686 # on and really only the interface - i.e. the .def file used to export symbols
688 PERLDEP = perldll.def
691 PL2BAT = bin\pl2bat.pl
706 ..\utils\config_data \
715 ..\utils\zipdetails \
728 .IF "$(CCTYPE)" == "GCC"
730 CFGSH_TMPL = config.gc
731 CFGH_TMPL = config_H.gc
732 PERLIMPLIB = ..\libperl519$(a)
733 PERLSTATICLIB = ..\libperl519s$(a)
739 CFGSH_TMPL = config.vc
740 CFGH_TMPL = config_H.vc
746 # makedef.pl must be updated if this changes, and this should normally
747 # only change when there is an incompatible revision of the public API.
748 PERLIMPLIB *= ..\perl519$(a)
749 PERLSTATICLIB *= ..\perl519s$(a)
750 PERLDLL = ..\perl519.dll
752 XCOPY = xcopy /f /r /i /d /y
753 RCOPY = xcopy /f /r /i /e /d /y
795 EXTRACORE_SRC += perllib.c
797 .IF "$(PERL_MALLOC)" == "define"
798 EXTRACORE_SRC += ..\malloc.c
801 EXTRACORE_SRC += ..\perlio.c
809 # We need this for miniperl build unless we override canned
810 # config.h #define building mini\*
811 #.IF "$(USE_PERLIO)" == "define"
812 WIN32_SRC += .\win32io.c
860 .\include\sys\errno2.h \
861 .\include\sys\socket.h \
864 CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
866 UUDMAP_H = ..\uudmap.h
867 BITCOUNT_H = ..\bitcount.h
868 MG_DATA_H = ..\mg_data.h
869 GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H)
871 MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
872 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
873 WIN32_OBJ = $(WIN32_SRC:db:+$(o))
874 MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
875 MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
876 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
877 DLL_OBJ = $(DYNALOADER)
878 X2P_OBJ = $(X2P_SRC:db:+$(o))
879 GENUUDMAP_OBJ = $(GENUUDMAP:db:+$(o))
881 PERLDLL_OBJ = $(CORE_OBJ)
882 PERLEXE_OBJ = perlmain$(o)
883 PERLEXEST_OBJ = perlmainst$(o)
885 PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
887 .IF "$(USE_SETARGV)" != ""
888 SETARGV_OBJ = setargv$(o)
891 .IF "$(ALL_STATIC)" == "define"
892 # some exclusions, unfortunately, until fixed:
893 # - MakeMaker isn't capable enough for SDBM_File (small bug)
894 STATIC_EXT = * !SDBM_File
896 # specify static extensions here, for example:
897 # (be sure to include Win32CORE to load Win32 on demand)
898 #STATIC_EXT = Win32CORE Cwd Compress/Raw/Zlib
899 STATIC_EXT = Win32CORE
902 DYNALOADER = ..\DynaLoader$(o)
904 # vars must be separated by "\t+~\t+", since we're using the tempfile
905 # version of config_sh.pl (we were overflowing someone's buffer by
906 # trying to fit them all on the command line)
909 INST_TOP=$(INST_TOP) ~ \
910 INST_VER=$(INST_VER) ~ \
911 INST_ARCH=$(INST_ARCH) ~ \
912 archname=$(ARCHNAME) ~ \
915 ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
916 cf_email=$(EMAIL) ~ \
917 d_mymalloc=$(PERL_MALLOC) ~ \
918 libs=$(LIBFILES:f) ~ \
919 incpath=$(CCINCDIR) ~ \
920 libperl=$(PERLIMPLIB:f) ~ \
921 libpth=$(CCLIBDIR);$(EXTRALIBDIRS) ~ \
928 static_ext=$(STATIC_EXT) ~ \
929 usethreads=$(USE_ITHREADS) ~ \
930 useithreads=$(USE_ITHREADS) ~ \
931 usemultiplicity=$(USE_MULTI) ~ \
932 useperlio=$(USE_PERLIO) ~ \
933 use64bitint=$(USE_64_BIT_INT) ~ \
934 uselargefiles=$(USE_LARGE_FILES) ~ \
935 usesitecustomize=$(USE_SITECUST) ~ \
936 LINK_FLAGS=$(LINK_FLAGS) ~ \
937 optimize=$(OPTIMIZE) ~ \
938 ARCHPREFIX=$(ARCHPREFIX) ~ \
945 all : CHECKDMAKE .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \
946 $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
947 $(PERLEXE) $(X2P) Extensions Extensions_nonxs $(PERLSTATIC)
949 regnodes : ..\regnodes.h
951 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
953 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
955 reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \
956 $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
957 $(X2P) Extensions_reonly
959 static: $(PERLEXESTATIC)
961 #----------------------------------------------------------------
964 .IF "$(NEWDMAKE)" == "define"
967 @echo Your dmake doesn't support ^|^| or ^&^& in conditional expressions.
968 @echo Please get the latest dmake from http://search.cpan.org/dist/dmake/
972 $(GLOBEXE) : perlglob$(o)
973 .IF "$(CCTYPE)" == "GCC"
974 $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
976 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
977 perlglob$(o) setargv$(o)
981 perlglob$(o) : perlglob.c
983 config.w32 : $(CFGSH_TMPL)
984 copy $(CFGSH_TMPL) config.w32
987 # Copy the template config.h and set configurables at the end of it
988 # as per the options chosen and compiler used.
989 # Note: This config.h is only used to build miniperl.exe anyway, but
990 # it's as well to have its options correct to be sure that it builds
991 # and so that it's "-V" options are correct for use by makedef.pl. The
992 # real config.h used to build perl.exe is generated from the top-level
993 # config_h.SH by config_h.PL (run by miniperl.exe).
995 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
997 copy $(CFGH_TMPL) config.h
999 @echo #ifndef _config_h_footer_>>$@
1000 @echo #define _config_h_footer_>>$@
1001 @echo #undef PTRSIZE>>$@
1002 @echo #undef SSize_t>>$@
1003 @echo #undef HAS_ATOLL>>$@
1004 @echo #undef HAS_STRTOLL>>$@
1005 @echo #undef HAS_STRTOULL>>$@
1006 @echo #undef IVTYPE>>$@
1007 @echo #undef UVTYPE>>$@
1008 @echo #undef IVSIZE>>$@
1009 @echo #undef UVSIZE>>$@
1010 @echo #undef NV_PRESERVES_UV>>$@
1011 @echo #undef NV_PRESERVES_UV_BITS>>$@
1012 @echo #undef IVdf>>$@
1013 @echo #undef UVuf>>$@
1014 @echo #undef UVof>>$@
1015 @echo #undef UVxf>>$@
1016 @echo #undef UVXf>>$@
1017 @echo #undef USE_64_BIT_INT>>$@
1018 @echo #undef Size_t_size>>$@
1019 .IF "$(WIN64)"=="define"
1020 @echo #define PTRSIZE ^8>>$@
1021 @echo #define SSize_t $(INT64)>>$@
1022 @echo #define HAS_ATOLL>>$@
1023 @echo #define HAS_STRTOLL>>$@
1024 @echo #define HAS_STRTOULL>>$@
1025 @echo #define Size_t_size ^8>>$@
1027 @echo #define PTRSIZE ^4>>$@
1028 @echo #define SSize_t int>>$@
1029 @echo #undef HAS_ATOLL>>$@
1030 @echo #undef HAS_STRTOLL>>$@
1031 @echo #undef HAS_STRTOULL>>$@
1032 @echo #define Size_t_size ^4>>$@
1034 .IF "$(USE_64_BIT_INT)"=="define"
1035 @echo #define IVTYPE $(INT64)>>$@
1036 @echo #define UVTYPE unsigned $(INT64)>>$@
1037 @echo #define IVSIZE ^8>>$@
1038 @echo #define UVSIZE ^8>>$@
1039 @echo #undef NV_PRESERVES_UV>>$@
1040 @echo #define NV_PRESERVES_UV_BITS 53>>$@
1041 @echo #define IVdf "$(INT64f)d">>$@
1042 @echo #define UVuf "$(INT64f)u">>$@
1043 @echo #define UVof "$(INT64f)o">>$@
1044 @echo #define UVxf "$(INT64f)x">>$@
1045 @echo #define UVXf "$(INT64f)X">>$@
1046 @echo #define USE_64_BIT_INT>>$@
1048 @echo #define IVTYPE long>>$@
1049 @echo #define UVTYPE unsigned long>>$@
1050 @echo #define IVSIZE ^4>>$@
1051 @echo #define UVSIZE ^4>>$@
1052 @echo #define NV_PRESERVES_UV>>$@
1053 @echo #define NV_PRESERVES_UV_BITS 32>>$@
1054 @echo #define IVdf "ld">>$@
1055 @echo #define UVuf "lu">>$@
1056 @echo #define UVof "lo">>$@
1057 @echo #define UVxf "lx">>$@
1058 @echo #define UVXf "lX">>$@
1059 @echo #undef USE_64_BIT_INT>>$@
1063 ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
1064 cd .. && miniperl -Ilib make_patchnum.pl
1066 # make sure that we recompile perl.c if the git version changes
1067 ..\perl$(o) : ..\git_version.h
1069 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
1070 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
1071 $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
1073 # This target is for when changes to the main config.sh happen.
1074 # Edit config.gc, then make perl using GCC in a minimal configuration (i.e.
1075 # with MULTI, ITHREADS, IMP_SYS, LARGE_FILES and PERLIO off), then make
1076 # this target to regenerate config_H.gc.
1078 $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
1079 $(CFGSH_TMPL) > ..\config.sh
1080 $(MINIPERL) -I..\lib ..\configpm --chdir=..
1081 -del /f $(CFGH_TMPL)
1082 -$(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)"
1083 rename config.h $(CFGH_TMPL)
1085 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL
1086 $(MINIPERL) -I..\lib ..\configpm --chdir=..
1087 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
1088 $(XCOPY) ..\*.h $(COREDIR)\*.*
1089 $(XCOPY) *.h $(COREDIR)\*.*
1090 $(RCOPY) include $(COREDIR)\*.*
1091 $(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)" \
1092 || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
1094 # See the comment in Makefile.SH explaining this seemingly cranky ordering
1095 $(MINIPERL) : ..\lib\buildcustomize.pl
1097 ..\lib\buildcustomize.pl : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS) ..\write_buildcustomize.pl
1098 .IF "$(CCTYPE)" == "GCC"
1099 $(LINK32) -v -mconsole -o $(MINIPERL) $(BLINK_FLAGS) \
1100 $(mktmp $(LKPRE) $(MINI_OBJ) $(LIBFILES) $(LKPOST))
1102 $(LINK32) -subsystem:console -out:$(MINIPERL) $(BLINK_FLAGS) \
1103 @$(mktmp $(DELAYLOAD) $(LIBFILES) $(MINI_OBJ))
1104 $(EMBED_EXE_MANI:s/$@/$(MINIPERL)/)
1106 $(MINIPERL) -I..\lib -f ..\write_buildcustomize.pl ..
1109 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
1111 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
1112 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*B).c
1114 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
1115 $(CC) -c $(CFLAGS) -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(*B).c
1117 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1118 # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
1119 # unless the .IF is true), so instead we use a .ELSE with the default.
1120 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1122 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
1123 .IF "$(USE_IMP_SYS)" == "define"
1124 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
1126 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
1129 # 1. we don't want to rebuild miniperl.exe when config.h changes
1130 # 2. we don't want to rebuild miniperl.exe with non-default config.h
1131 # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
1132 $(MINI_OBJ) : $(CORE_NOCFG_H)
1134 $(WIN32_OBJ) : $(CORE_H)
1136 $(CORE_OBJ) : $(CORE_H)
1138 $(DLL_OBJ) : $(CORE_H)
1140 $(X2P_OBJ) : $(CORE_H)
1142 perldll.def : $(MINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibst_h.pl
1143 $(MINIPERL) -I..\lib create_perllibst_h.pl
1144 $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
1145 $(BUILDOPT) CCTYPE=$(CCTYPE) TARG_DIR=..\ > perldll.def
1147 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1148 .IF "$(CCTYPE)" == "GCC"
1149 $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
1150 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1151 $(shell @type Extensions_static) \
1152 $(LIBFILES) $(LKPOST))
1153 $(IMPLIB) --output-lib $(PERLIMPLIB) \
1154 --dllname $(PERLDLL:b).dll \
1156 --base-file perl.base \
1157 --output-exp perl.exp
1158 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
1159 $(mktmp $(LKPRE) $(PERLDLL_OBJ) \
1160 $(shell @type Extensions_static) \
1161 $(LIBFILES) perl.exp $(LKPOST))
1163 $(LINK32) -dll -def:perldll.def -out:$@ $(BLINK_FLAGS) \
1164 @Extensions_static \
1165 @$(mktmp -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \
1166 $(PERLDLL_RES) $(PERLDLL_OBJ))
1169 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1171 $(PERLSTATICLIB): $(PERLDLL_OBJ) Extensions_static
1172 .IF "$(CCTYPE)" == "GCC"
1173 $(LIB32) $(LIB_FLAGS) $@ $(PERLDLL_OBJ)
1174 if exist $(STATICDIR) rmdir /s /q $(STATICDIR)
1175 for %i in ($(shell @type Extensions_static)) do \
1176 @mkdir $(STATICDIR) && cd $(STATICDIR) && \
1177 $(ARCHPREFIX)ar x ..\%i && \
1178 $(ARCHPREFIX)ar q ..\$@ *$(o) && \
1179 cd .. && rmdir /s /q $(STATICDIR)
1181 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \
1182 @$(mktmp $(PERLDLL_OBJ))
1184 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
1186 $(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
1188 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1189 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1191 ..\x2p\hash$(o) : ..\x2p\hash.c
1192 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1194 ..\x2p\str$(o) : ..\x2p\str.c
1195 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1197 ..\x2p\util$(o) : ..\x2p\util.c
1198 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1200 ..\x2p\walk$(o) : ..\x2p\walk.c
1201 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1203 $(X2P) : $(MINIPERL) $(X2P_OBJ) Extensions
1204 $(MINIPERL) -I..\lib ..\x2p\find2perl.PL
1205 $(MINIPERL) -I..\lib ..\x2p\s2p.PL
1206 .IF "$(CCTYPE)" == "GCC"
1207 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1208 $(mktmp $(LKPRE) $(X2P_OBJ) $(LIBFILES) $(LKPOST))
1210 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1211 @$(mktmp $(LIBFILES) $(X2P_OBJ))
1215 $(MINIDIR)\globals$(o) : $(GENERATED_HEADERS)
1217 $(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H)
1219 $(BITCOUNT_H) : $(GENUUDMAP)
1220 $(GENUUDMAP) $(GENERATED_HEADERS)
1222 $(GENUUDMAP_OBJ) : ..\mg_raw.h
1224 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
1225 .IF "$(CCTYPE)" == "GCC"
1226 $(LINK32) -v -o $@ $(BLINK_FLAGS) \
1227 $(mktmp $(LKPRE) $(GENUUDMAP_OBJ) $(LIBFILES) $(LKPOST))
1229 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1230 @$(mktmp $(LIBFILES) $(GENUUDMAP_OBJ))
1234 perlmain.c : runperl.c
1235 copy runperl.c perlmain.c
1237 perlmain$(o) : perlmain.c
1238 $(CC) $(CFLAGS_O:s,-DPERLDLL,-UPERLDLL,) $(OBJOUT_FLAG)$@ -c perlmain.c
1240 perlmainst.c : runperl.c
1241 copy runperl.c perlmainst.c
1243 perlmainst$(o) : perlmainst.c
1244 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1246 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1247 .IF "$(CCTYPE)" == "GCC"
1248 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1249 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
1251 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1252 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES) $(SETARGV_OBJ)
1255 copy $(PERLEXE) $(WPERLEXE)
1256 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1258 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1259 .IF "$(CCTYPE)" == "GCC"
1260 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1261 $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES)
1263 $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
1264 $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES) $(SETARGV_OBJ)
1268 MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
1269 $(MINIPERL) -I..\lib ..\mkppport
1271 #-------------------------------------------------------------------------------
1272 # There's no direct way to mark a dependency on
1273 # DynaLoader.pm, so this will have to do
1274 Extensions : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1275 $(XCOPY) ..\*.h $(COREDIR)\*.*
1276 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
1278 Extensions_reonly : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
1279 $(XCOPY) ..\*.h $(COREDIR)\*.*
1280 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
1282 Extensions_static : ..\make_ext.pl ..\lib\buildcustomize.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
1283 $(XCOPY) ..\*.h $(COREDIR)\*.*
1284 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
1285 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1287 Extensions_nonxs : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) ..\pod\perlfunc.pod
1288 $(XCOPY) ..\*.h $(COREDIR)\*.*
1289 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
1291 $(DYNALOADER) : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
1292 $(XCOPY) ..\*.h $(COREDIR)\*.*
1293 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
1296 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
1298 Extensions_realclean :
1299 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
1301 #-------------------------------------------------------------------------------
1304 doc: $(PERLEXE) ..\pod\perltoc.pod
1305 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1306 --podpath=pod:lib:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
1309 ..\utils\Makefile: $(CONFIGPM) ..\utils\Makefile.PL
1310 $(MINIPERL) -I..\lib ..\utils\Makefile.PL ..
1312 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1313 # so please check that script before making structural changes here
1314 utils: $(PERLEXE) $(X2P) ..\utils\Makefile
1315 cd ..\utils && $(MAKE) PERL=$(MINIPERL)
1316 copy ..\README.aix ..\pod\perlaix.pod
1317 copy ..\README.amiga ..\pod\perlamiga.pod
1318 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1319 copy ..\README.ce ..\pod\perlce.pod
1320 copy ..\README.cn ..\pod\perlcn.pod
1321 copy ..\README.cygwin ..\pod\perlcygwin.pod
1322 copy ..\README.dos ..\pod\perldos.pod
1323 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1324 copy ..\README.haiku ..\pod\perlhaiku.pod
1325 copy ..\README.hpux ..\pod\perlhpux.pod
1326 copy ..\README.hurd ..\pod\perlhurd.pod
1327 copy ..\README.irix ..\pod\perlirix.pod
1328 copy ..\README.jp ..\pod\perljp.pod
1329 copy ..\README.ko ..\pod\perlko.pod
1330 copy ..\README.linux ..\pod\perllinux.pod
1331 copy ..\README.macos ..\pod\perlmacos.pod
1332 copy ..\README.macosx ..\pod\perlmacosx.pod
1333 copy ..\README.netware ..\pod\perlnetware.pod
1334 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1335 copy ..\README.os2 ..\pod\perlos2.pod
1336 copy ..\README.os390 ..\pod\perlos390.pod
1337 copy ..\README.os400 ..\pod\perlos400.pod
1338 copy ..\README.plan9 ..\pod\perlplan9.pod
1339 copy ..\README.qnx ..\pod\perlqnx.pod
1340 copy ..\README.riscos ..\pod\perlriscos.pod
1341 copy ..\README.solaris ..\pod\perlsolaris.pod
1342 copy ..\README.symbian ..\pod\perlsymbian.pod
1343 copy ..\README.synology ..\pod\perlsynology.pod
1344 copy ..\README.tru64 ..\pod\perltru64.pod
1345 copy ..\README.tw ..\pod\perltw.pod
1346 copy ..\README.vos ..\pod\perlvos.pod
1347 copy ..\README.win32 ..\pod\perlwin32.pod
1348 copy ..\pod\perldelta.pod ..\pod\perl5196delta.pod
1349 $(PERLEXE) $(PL2BAT) $(UTILS)
1350 $(MINIPERL) -I..\lib ..\autodoc.pl ..
1351 $(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q ..
1353 ..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
1354 $(PERLEXE) -f ..\pod\buildtoc -q
1356 # Note that the pod cleanup in this next section is parsed (and regenerated
1357 # by pod/buildtoc so please check that script before making changes here
1359 distclean: realclean
1360 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1361 $(PERLIMPLIB) ..\miniperl$(a) $(PERLEXESTATIC) $(PERLSTATICLIB)
1362 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1363 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1364 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1365 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1366 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1367 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1368 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1369 -del /f $(LIBDIR)\File\Glob.pm
1370 -del /f $(LIBDIR)\Storable.pm
1371 -del /f $(LIBDIR)\Sys\Hostname.pm
1372 -del /f $(LIBDIR)\Time\HiRes.pm
1373 -del /f $(LIBDIR)\Unicode\Normalize.pm
1374 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1375 -del /f $(LIBDIR)\Win32.pm
1376 -del /f $(LIBDIR)\Win32CORE.pm
1377 -del /f $(LIBDIR)\Win32API\File.pm
1378 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1379 -del /f $(LIBDIR)\buildcustomize.pl
1380 -del /f $(DISTDIR)\XSLoader\XSLoader.pm
1382 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1383 -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
1384 -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
1385 -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie
1386 -if exist $(LIBDIR)\Carp rmdir /s /q $(LIBDIR)\Carp
1387 -if exist $(LIBDIR)\CGI rmdir /s /q $(LIBDIR)\CGI
1388 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1389 -if exist $(LIBDIR)\Config\Perl rmdir /s /q $(LIBDIR)\Config\Perl
1390 -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN
1391 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1392 -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel
1393 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1394 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1395 -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding
1396 -if exist $(LIBDIR)\Exporter rmdir /s /q $(LIBDIR)\Exporter
1397 -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder
1398 -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command
1399 -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant
1400 -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist
1401 -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker
1402 -if exist $(LIBDIR)\ExtUtils\ParseXS rmdir /s /q $(LIBDIR)\ExtUtils\ParseXS
1403 -if exist $(LIBDIR)\ExtUtils\Typemaps rmdir /s /q $(LIBDIR)\ExtUtils\Typemaps
1404 -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec
1405 -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter
1406 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1407 -if exist $(LIBDIR)\HTTP rmdir /s /q $(LIBDIR)\HTTP
1408 -if exist $(LIBDIR)\I18N rmdir /s /q $(LIBDIR)\I18N
1409 -if exist $(LIBDIR)\inc rmdir /s /q $(LIBDIR)\inc
1410 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1411 -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC
1412 -if exist $(LIBDIR)\JSON rmdir /s /q $(LIBDIR)\JSON
1413 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1414 -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale
1415 -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math
1416 -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize
1417 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1418 -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
1419 -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
1420 -if exist $(LIBDIR)\Package rmdir /s /q $(LIBDIR)\Package
1421 -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
1422 -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
1423 -if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl
1424 -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO
1425 -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc
1426 -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple
1427 -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text
1428 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1429 -if exist $(LIBDIR)\Search rmdir /s /q $(LIBDIR)\Search
1430 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1431 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1432 -if exist $(LIBDIR)\Term rmdir /s /q $(LIBDIR)\Term
1433 -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
1434 -if exist $(LIBDIR)\Text rmdir /s /q $(LIBDIR)\Text
1435 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
1436 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1437 -if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash
1438 -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
1439 -if exist $(LIBDIR)\Unicode\Collate\Locale rmdir /s /q $(LIBDIR)\Unicode\Collate\Locale
1440 -if exist $(LIBDIR)\version rmdir /s /q $(LIBDIR)\version
1441 -if exist $(LIBDIR)\VMS rmdir /s /q $(LIBDIR)\VMS
1442 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1443 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1444 -cd $(PODDIR) && del /f *.html *.bat roffitall \
1445 perl5196delta.pod perlaix.pod perlamiga.pod perlapi.pod \
1446 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod perldos.pod \
1447 perlfreebsd.pod perlhaiku.pod perlhpux.pod perlhurd.pod \
1448 perlintern.pod perlirix.pod perljp.pod perlko.pod perllinux.pod \
1449 perlmacos.pod perlmacosx.pod perlmodlib.pod perlnetware.pod \
1450 perlopenbsd.pod perlos2.pod perlos390.pod perlos400.pod \
1451 perlplan9.pod perlqnx.pod perlriscos.pod perlsolaris.pod \
1452 perlsymbian.pod perlsynology.pod perltoc.pod perltru64.pod \
1453 perltw.pod perluniprops.pod perlvos.pod perlwin32.pod
1454 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1455 perldoc perlivp libnetcfg enc2xs piconv cpan *.bat \
1456 xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep shasum corelist config_data zipdetails
1457 -cd ..\x2p && del /f find2perl s2p psed *.bat
1458 -del /f ..\config.sh perlmain.c dlutils.c config.h.new \
1461 -del /f ..\lib\Config_git.pl
1464 -del /f $(PERLEXE_RES) perl.base
1465 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib ppport.h
1466 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1467 -cd $(DISTDIR) && del /s *.def Makefile Makefile.old
1468 -cd $(CPANDIR) && del /s *.def Makefile Makefile.old
1469 -del /s ..\utils\Makefile
1470 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1471 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1472 -if exist pod2htmd.tmp del pod2htmd.tmp
1473 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1474 -del /f ..\t\test_state
1476 install : all installbare installhtml
1478 installbare : utils ..\pod\perltoc.pod
1479 $(PERLEXE) ..\installperl
1480 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1481 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1482 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1483 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1484 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1485 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1488 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1490 inst_lib : $(CONFIGPM)
1491 $(RCOPY) ..\lib $(INST_LIB)\*.*
1493 $(UNIDATAFILES) ..\pod\perluniprops.pod .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
1494 cd ..\lib\unicore && \
1495 ..\$(MINIPERL) -I.. -I..\..\dist\Cwd\lib -I..\..\dist\Cwd mktables -P ..\..\pod -maketest -makelist -p
1497 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
1498 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1499 if exist ..\t\perl.exe del /f ..\t\perl.exe
1500 rename ..\t\miniperl.exe perl.exe
1501 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1504 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t opbasic/*.t op/*.t pragma/*.t
1506 test-prep : all utils ..\pod\perltoc.pod
1507 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1508 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1509 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1510 .IF "$(CCTYPE)" == "GCC"
1511 # If building with gcc versions 4.x.x or greater, then
1512 # the GCC helper DLL will also need copied to the test directory.
1513 # The name of the dll can change, depending upon which vendor has supplied
1514 # your compiler, and upon the values of "x".
1515 # libstdc++-6.dll is copied if it exists as it, too, may then be needed.
1516 # Without this copying, the op/taint.t test script will fail.
1517 if exist $(CCDLLDIR)\libgcc_s_sjlj-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_sjlj-1.dll ..\t\$(NULL)
1518 if exist $(CCDLLDIR)\libgcc_s_dw2-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_dw2-1.dll ..\t\$(NULL)
1519 if exist $(CCDLLDIR)\libstdc++-6.dll $(XCOPY) $(CCDLLDIR)\libstdc++-6.dll ..\t\$(NULL)
1523 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1524 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1526 test_porting : test-prep
1527 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1528 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t
1530 test-reonly : reonly utils
1531 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1532 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1533 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1535 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\\/ $(EXTRA) && \
1539 cd .. && regen.pl && cd win32
1541 test-notty : test-prep
1542 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1543 set PERL_SKIP_TTY_TEST=1 && \
1544 cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1547 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1548 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1549 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1550 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1551 cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1554 -@erase miniperlmain$(o)
1556 -@erase perlglob$(o)
1557 -@erase perlmain$(o)
1558 -@erase perlmainst$(o)
1561 -@erase /f ..\git_version.h
1565 -@erase $(PERLEXESTATIC)
1566 -@erase $(PERLSTATICLIB)
1569 -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(GENERATED_HEADERS)
1570 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1571 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1572 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1573 -@erase $(UNIDATAFILES)
1574 -@erase $(WIN32_OBJ)
1577 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1578 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1579 -@erase ..\x2p\*.exe ..\x2p\*.bat
1582 -@erase Extensions_static
1586 clean : Extensions_clean _clean
1588 realclean : Extensions_realclean _clean
1590 # Handy way to run perlbug -ok without having to install and run the
1591 # installed perlbug. We don't re-run the tests here - we trust the user.
1592 # Please *don't* use this unless all tests pass.
1593 # If you want to report test failures, use "dmake nok" instead.
1595 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1598 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1601 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1604 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok