3 * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
4 * 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 by Larry Wall and others
6 * You may distribute under the terms of either the GNU General Public
7 * License or the Artistic License, as specified in the README file.
9 * Control ops (cops) are one of the two ops OP_NEXTSTATE and OP_DBSTATE,
10 * that (loosely speaking) are separate statements.
11 * They hold information important for lexical state and error reporting.
12 * At run time, PL_curcop is set to point to the most recently executed cop,
13 * and thus can be used to determine our current state.
16 /* A jmpenv packages the state required to perform a proper non-local jump.
17 * Note that there is a PL_start_env initialized when perl starts, and
18 * PL_top_env points to this initially, so PL_top_env should always be
21 * Existence of a non-null PL_top_env->je_prev implies it is valid to call
22 * longjmp() at that runlevel (we make sure PL_start_env.je_prev is always
23 * null to ensure this).
25 * je_mustcatch, when set at any runlevel to TRUE, means eval ops must
26 * establish a local jmpenv to handle exception traps. Care must be taken
27 * to restore the previous value of je_mustcatch before exiting the
28 * stack frame iff JMPENV_PUSH was not called in that stack frame.
33 struct jmpenv * je_prev;
34 Sigjmp_buf je_buf; /* uninit if je_prev is NULL */
35 int je_ret; /* last exception thrown */
36 bool je_mustcatch; /* need to call longjmp()? */
39 typedef struct jmpenv JMPENV;
42 * How to build the first jmpenv.
44 * top_env needs to be non-zero. It points to an area
45 * in which longjmp() stuff is stored, as C callstack
46 * info there at least is thread specific this has to
47 * be per-thread. Otherwise a 'die' in a thread gives
48 * that thread the C stack of last thread to do an eval {}!
51 #define JMPENV_BOOTSTRAP \
53 PERL_POISON_EXPR(PoisonNew(&PL_start_env, 1, JMPENV));\
54 PL_top_env = &PL_start_env; \
55 PL_start_env.je_prev = NULL; \
56 PL_start_env.je_ret = -1; \
57 PL_start_env.je_mustcatch = TRUE; \
61 * PERL_FLEXIBLE_EXCEPTIONS
63 * All the flexible exceptions code has been removed.
64 * See the following threads for details:
66 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2004-07/msg00378.html
68 * Joshua's original patches (which weren't applied) and discussion:
70 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01396.html
71 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01489.html
72 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01491.html
73 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01608.html
74 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02144.html
75 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02998.html
77 * Chip's reworked patch and discussion:
79 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1999-03/msg00520.html
81 * The flaw in these patches (which went unnoticed at the time) was
82 * that they moved some code that could potentially die() out of the
83 * region protected by the setjmp()s. This caused exceptions within
84 * END blocks and such to not be handled by the correct setjmp().
86 * The original patches that introduces flexible exceptions were:
88 * http://perl5.git.perl.org/perl.git/commit/312caa8e97f1c7ee342a9895c2f0e749625b4929
89 * http://perl5.git.perl.org/perl.git/commit/14dd3ad8c9bf82cf09798a22cc89a9862dfd6d1a
93 #define dJMPENV JMPENV cur_env
95 #define JMPENV_PUSH(v) \
98 int i = 0; JMPENV *p = PL_top_env; \
99 while (p) { i++; p = p->je_prev; } \
100 Perl_deb(aTHX_ "JUMPENV_PUSH level=%d at %s:%d\n", \
101 i, __FILE__, __LINE__);}) \
102 cur_env.je_prev = PL_top_env; \
103 cur_env.je_ret = PerlProc_setjmp(cur_env.je_buf, SCOPE_SAVES_SIGNAL_MASK); \
104 PL_top_env = &cur_env; \
105 cur_env.je_mustcatch = FALSE; \
106 (v) = cur_env.je_ret; \
112 int i = -1; JMPENV *p = PL_top_env; \
113 while (p) { i++; p = p->je_prev; } \
114 Perl_deb(aTHX_ "JUMPENV_POP level=%d at %s:%d\n", \
115 i, __FILE__, __LINE__);}) \
116 assert(PL_top_env == &cur_env); \
117 PL_top_env = cur_env.je_prev; \
120 #define JMPENV_JUMP(v) \
123 int i = -1; JMPENV *p = PL_top_env; \
124 while (p) { i++; p = p->je_prev; } \
125 Perl_deb(aTHX_ "JUMPENV_JUMP(%d) level=%d at %s:%d\n", \
126 (int)v, i, __FILE__, __LINE__);}) \
127 if (PL_top_env->je_prev) \
128 PerlProc_longjmp(PL_top_env->je_buf, (v)); \
130 PerlProc_exit(STATUS_EXIT); \
131 PerlIO_printf(PerlIO_stderr(), "panic: top_env, v=%d\n", (int)v); \
135 #define CATCH_GET (PL_top_env->je_mustcatch)
136 #define CATCH_SET(v) \
140 "JUMPLEVEL set catch %d => %d (for %p) at %s:%d\n", \
141 PL_top_env->je_mustcatch, v, (void*)PL_top_env, \
142 __FILE__, __LINE__);) \
143 PL_top_env->je_mustcatch = (v); \
147 =head1 COP Hint Hashes
150 typedef struct refcounted_he COPHH;
152 #define COPHH_KEY_UTF8 REFCOUNTED_HE_KEY_UTF8
155 =for apidoc Amx|SV *|cophh_fetch_pvn|const COPHH *cophh|const char *keypv|STRLEN keylen|U32 hash|U32 flags
157 Look up the entry in the cop hints hash I<cophh> with the key specified by
158 I<keypv> and I<keylen>. If I<flags> has the C<COPHH_KEY_UTF8> bit set,
159 the key octets are interpreted as UTF-8, otherwise they are interpreted
160 as Latin-1. I<hash> is a precomputed hash of the key string, or zero if
161 it has not been precomputed. Returns a mortal scalar copy of the value
162 associated with the key, or C<&PL_sv_placeholder> if there is no value
163 associated with the key.
168 #define cophh_fetch_pvn(cophh, keypv, keylen, hash, flags) \
169 Perl_refcounted_he_fetch_pvn(aTHX_ cophh, keypv, keylen, hash, flags)
172 =for apidoc Amx|SV *|cophh_fetch_pvs|const COPHH *cophh|const char *key|U32 flags
174 Like L</cophh_fetch_pvn>, but takes a literal string instead of a
175 string/length pair, and no precomputed hash.
180 #define cophh_fetch_pvs(cophh, key, flags) \
181 Perl_refcounted_he_fetch_pvn(aTHX_ cophh, STR_WITH_LEN(key), 0, flags)
184 =for apidoc Amx|SV *|cophh_fetch_pv|const COPHH *cophh|const char *key|U32 hash|U32 flags
186 Like L</cophh_fetch_pvn>, but takes a nul-terminated string instead of
187 a string/length pair.
192 #define cophh_fetch_pv(cophh, key, hash, flags) \
193 Perl_refcounted_he_fetch_pv(aTHX_ cophh, key, hash, flags)
196 =for apidoc Amx|SV *|cophh_fetch_sv|const COPHH *cophh|SV *key|U32 hash|U32 flags
198 Like L</cophh_fetch_pvn>, but takes a Perl scalar instead of a
204 #define cophh_fetch_sv(cophh, key, hash, flags) \
205 Perl_refcounted_he_fetch_sv(aTHX_ cophh, key, hash, flags)
208 =for apidoc Amx|HV *|cophh_2hv|const COPHH *cophh|U32 flags
210 Generates and returns a standard Perl hash representing the full set of
211 key/value pairs in the cop hints hash I<cophh>. I<flags> is currently
212 unused and must be zero.
217 #define cophh_2hv(cophh, flags) \
218 Perl_refcounted_he_chain_2hv(aTHX_ cophh, flags)
221 =for apidoc Amx|COPHH *|cophh_copy|COPHH *cophh
223 Make and return a complete copy of the cop hints hash I<cophh>.
228 #define cophh_copy(cophh) Perl_refcounted_he_inc(aTHX_ cophh)
231 =for apidoc Amx|void|cophh_free|COPHH *cophh
233 Discard the cop hints hash I<cophh>, freeing all resources associated
239 #define cophh_free(cophh) Perl_refcounted_he_free(aTHX_ cophh)
242 =for apidoc Amx|COPHH *|cophh_new_empty
244 Generate and return a fresh cop hints hash containing no entries.
249 #define cophh_new_empty() ((COPHH *)NULL)
252 =for apidoc Amx|COPHH *|cophh_store_pvn|COPHH *cophh|const char *keypv|STRLEN keylen|U32 hash|SV *value|U32 flags
254 Stores a value, associated with a key, in the cop hints hash I<cophh>,
255 and returns the modified hash. The returned hash pointer is in general
256 not the same as the hash pointer that was passed in. The input hash is
257 consumed by the function, and the pointer to it must not be subsequently
258 used. Use L</cophh_copy> if you need both hashes.
260 The key is specified by I<keypv> and I<keylen>. If I<flags> has the
261 C<COPHH_KEY_UTF8> bit set, the key octets are interpreted as UTF-8,
262 otherwise they are interpreted as Latin-1. I<hash> is a precomputed
263 hash of the key string, or zero if it has not been precomputed.
265 I<value> is the scalar value to store for this key. I<value> is copied
266 by this function, which thus does not take ownership of any reference
267 to it, and later changes to the scalar will not be reflected in the
268 value visible in the cop hints hash. Complex types of scalar will not
269 be stored with referential integrity, but will be coerced to strings.
274 #define cophh_store_pvn(cophh, keypv, keylen, hash, value, flags) \
275 Perl_refcounted_he_new_pvn(aTHX_ cophh, keypv, keylen, hash, value, flags)
278 =for apidoc Amx|COPHH *|cophh_store_pvs|const COPHH *cophh|const char *key|SV *value|U32 flags
280 Like L</cophh_store_pvn>, but takes a literal string instead of a
281 string/length pair, and no precomputed hash.
286 #define cophh_store_pvs(cophh, key, value, flags) \
287 Perl_refcounted_he_new_pvn(aTHX_ cophh, STR_WITH_LEN(key), 0, value, flags)
290 =for apidoc Amx|COPHH *|cophh_store_pv|const COPHH *cophh|const char *key|U32 hash|SV *value|U32 flags
292 Like L</cophh_store_pvn>, but takes a nul-terminated string instead of
293 a string/length pair.
298 #define cophh_store_pv(cophh, key, hash, value, flags) \
299 Perl_refcounted_he_new_pv(aTHX_ cophh, key, hash, value, flags)
302 =for apidoc Amx|COPHH *|cophh_store_sv|const COPHH *cophh|SV *key|U32 hash|SV *value|U32 flags
304 Like L</cophh_store_pvn>, but takes a Perl scalar instead of a
310 #define cophh_store_sv(cophh, key, hash, value, flags) \
311 Perl_refcounted_he_new_sv(aTHX_ cophh, key, hash, value, flags)
314 =for apidoc Amx|COPHH *|cophh_delete_pvn|COPHH *cophh|const char *keypv|STRLEN keylen|U32 hash|U32 flags
316 Delete a key and its associated value from the cop hints hash I<cophh>,
317 and returns the modified hash. The returned hash pointer is in general
318 not the same as the hash pointer that was passed in. The input hash is
319 consumed by the function, and the pointer to it must not be subsequently
320 used. Use L</cophh_copy> if you need both hashes.
322 The key is specified by I<keypv> and I<keylen>. If I<flags> has the
323 C<COPHH_KEY_UTF8> bit set, the key octets are interpreted as UTF-8,
324 otherwise they are interpreted as Latin-1. I<hash> is a precomputed
325 hash of the key string, or zero if it has not been precomputed.
330 #define cophh_delete_pvn(cophh, keypv, keylen, hash, flags) \
331 Perl_refcounted_he_new_pvn(aTHX_ cophh, keypv, keylen, hash, \
335 =for apidoc Amx|COPHH *|cophh_delete_pvs|const COPHH *cophh|const char *key|U32 flags
337 Like L</cophh_delete_pvn>, but takes a literal string instead of a
338 string/length pair, and no precomputed hash.
343 #define cophh_delete_pvs(cophh, key, flags) \
344 Perl_refcounted_he_new_pvn(aTHX_ cophh, STR_WITH_LEN(key), 0, \
348 =for apidoc Amx|COPHH *|cophh_delete_pv|const COPHH *cophh|const char *key|U32 hash|U32 flags
350 Like L</cophh_delete_pvn>, but takes a nul-terminated string instead of
351 a string/length pair.
356 #define cophh_delete_pv(cophh, key, hash, flags) \
357 Perl_refcounted_he_new_pv(aTHX_ cophh, key, hash, (SV *)NULL, flags)
360 =for apidoc Amx|COPHH *|cophh_delete_sv|const COPHH *cophh|SV *key|U32 hash|U32 flags
362 Like L</cophh_delete_pvn>, but takes a Perl scalar instead of a
368 #define cophh_delete_sv(cophh, key, hash, flags) \
369 Perl_refcounted_he_new_sv(aTHX_ cophh, key, hash, (SV *)NULL, flags)
371 #include "mydtrace.h"
375 /* On LP64 putting this here takes advantage of the fact that BASEOP isn't
376 an exact multiple of 8 bytes to save structure padding. */
377 line_t cop_line; /* line # of this command */
378 /* label for this construct is now stored in cop_hints_hash */
380 PADOFFSET cop_stashoff; /* offset into PL_stashpad, for the
381 package the line was compiled in */
382 char * cop_file; /* file name the following line # is from */
384 HV * cop_stash; /* package line was compiled in */
385 GV * cop_filegv; /* file the following line # is from */
387 U32 cop_hints; /* hints bits from pragmata */
388 U32 cop_seq; /* parse sequence number */
389 /* Beware. mg.c and warnings.pl assume the type of this is STRLEN *: */
390 STRLEN * cop_warnings; /* lexical warnings bitmask */
391 /* compile time state of %^H. See the comment in op.c for how this is
392 used to recreate a hash to return from caller. */
393 COPHH * cop_hints_hash;
397 # define CopFILE(c) ((c)->cop_file)
398 # define CopFILEGV(c) (CopFILE(c) \
399 ? gv_fetchfile(CopFILE(c)) : NULL)
402 # define CopFILE_set(c,pv) ((c)->cop_file = savepv(pv))
403 # define CopFILE_setn(c,pv,l) ((c)->cop_file = savepv((pv),(l)))
405 # define CopFILE_set(c,pv) ((c)->cop_file = savesharedpv(pv))
406 # define CopFILE_setn(c,pv,l) ((c)->cop_file = savesharedpvn((pv),(l)))
409 # define CopFILESV(c) (CopFILE(c) \
410 ? GvSV(gv_fetchfile(CopFILE(c))) : NULL)
411 # define CopFILEAV(c) (CopFILE(c) \
412 ? GvAV(gv_fetchfile(CopFILE(c))) : NULL)
413 # define CopFILEAVx(c) (assert_(CopFILE(c)) \
414 GvAV(gv_fetchfile(CopFILE(c))))
416 # define CopSTASH(c) PL_stashpad[(c)->cop_stashoff]
417 # define CopSTASH_set(c,hv) ((c)->cop_stashoff = (hv) \
418 ? alloccopstash(hv) \
421 # define CopFILE_free(c) SAVECOPFILE_FREE(c)
423 # define CopFILE_free(c) (PerlMemShared_free(CopFILE(c)),(CopFILE(c) = NULL))
426 # define CopFILEGV(c) ((c)->cop_filegv)
427 # define CopFILEGV_set(c,gv) ((c)->cop_filegv = (GV*)SvREFCNT_inc(gv))
428 # define CopFILE_set(c,pv) CopFILEGV_set((c), gv_fetchfile(pv))
429 # define CopFILE_setn(c,pv,l) CopFILEGV_set((c), gv_fetchfile_flags((pv),(l),0))
430 # define CopFILESV(c) (CopFILEGV(c) ? GvSV(CopFILEGV(c)) : NULL)
431 # define CopFILEAV(c) (CopFILEGV(c) ? GvAV(CopFILEGV(c)) : NULL)
433 # define CopFILEAVx(c) (assert(CopFILEGV(c)), GvAV(CopFILEGV(c)))
435 # define CopFILEAVx(c) (GvAV(CopFILEGV(c)))
437 # define CopFILE(c) (CopFILEGV(c) \
438 ? GvNAME(CopFILEGV(c))+2 : NULL)
439 # define CopSTASH(c) ((c)->cop_stash)
440 # define CopSTASH_set(c,hv) ((c)->cop_stash = (hv))
441 # define CopFILE_free(c) (SvREFCNT_dec(CopFILEGV(c)),(CopFILEGV(c) = NULL))
443 #endif /* USE_ITHREADS */
445 #define CopSTASHPV(c) (CopSTASH(c) ? HvNAME_get(CopSTASH(c)) : NULL)
446 /* cop_stash is not refcounted */
447 #define CopSTASHPV_set(c,pv) CopSTASH_set((c), gv_stashpv(pv,GV_ADD))
448 #define CopSTASH_eq(c,hv) (CopSTASH(c) == (hv))
450 #define CopHINTHASH_get(c) ((COPHH*)((c)->cop_hints_hash))
451 #define CopHINTHASH_set(c,h) ((c)->cop_hints_hash = (h))
454 =head1 COP Hint Reading
458 =for apidoc Am|SV *|cop_hints_fetch_pvn|const COP *cop|const char *keypv|STRLEN keylen|U32 hash|U32 flags
460 Look up the hint entry in the cop I<cop> with the key specified by
461 I<keypv> and I<keylen>. If I<flags> has the C<COPHH_KEY_UTF8> bit set,
462 the key octets are interpreted as UTF-8, otherwise they are interpreted
463 as Latin-1. I<hash> is a precomputed hash of the key string, or zero if
464 it has not been precomputed. Returns a mortal scalar copy of the value
465 associated with the key, or C<&PL_sv_placeholder> if there is no value
466 associated with the key.
471 #define cop_hints_fetch_pvn(cop, keypv, keylen, hash, flags) \
472 cophh_fetch_pvn(CopHINTHASH_get(cop), keypv, keylen, hash, flags)
475 =for apidoc Am|SV *|cop_hints_fetch_pvs|const COP *cop|const char *key|U32 flags
477 Like L</cop_hints_fetch_pvn>, but takes a literal string instead of a
478 string/length pair, and no precomputed hash.
483 #define cop_hints_fetch_pvs(cop, key, flags) \
484 cophh_fetch_pvs(CopHINTHASH_get(cop), key, flags)
487 =for apidoc Am|SV *|cop_hints_fetch_pv|const COP *cop|const char *key|U32 hash|U32 flags
489 Like L</cop_hints_fetch_pvn>, but takes a nul-terminated string instead
490 of a string/length pair.
495 #define cop_hints_fetch_pv(cop, key, hash, flags) \
496 cophh_fetch_pv(CopHINTHASH_get(cop), key, hash, flags)
499 =for apidoc Am|SV *|cop_hints_fetch_sv|const COP *cop|SV *key|U32 hash|U32 flags
501 Like L</cop_hints_fetch_pvn>, but takes a Perl scalar instead of a
507 #define cop_hints_fetch_sv(cop, key, hash, flags) \
508 cophh_fetch_sv(CopHINTHASH_get(cop), key, hash, flags)
511 =for apidoc Am|HV *|cop_hints_2hv|const COP *cop|U32 flags
513 Generates and returns a standard Perl hash representing the full set of
514 hint entries in the cop I<cop>. I<flags> is currently unused and must
520 #define cop_hints_2hv(cop, flags) \
521 cophh_2hv(CopHINTHASH_get(cop), flags)
523 #define CopLABEL(c) Perl_cop_fetch_label(aTHX_ (c), NULL, NULL)
524 #define CopLABEL_len(c,len) Perl_cop_fetch_label(aTHX_ (c), len, NULL)
525 #define CopLABEL_len_flags(c,len,flags) Perl_cop_fetch_label(aTHX_ (c), len, flags)
526 #define CopLABEL_alloc(pv) ((pv)?savepv(pv):NULL)
528 #define CopSTASH_ne(c,hv) (!CopSTASH_eq(c,hv))
529 #define CopLINE(c) ((c)->cop_line)
530 #define CopLINE_inc(c) (++CopLINE(c))
531 #define CopLINE_dec(c) (--CopLINE(c))
532 #define CopLINE_set(c,l) (CopLINE(c) = (l))
534 /* OutCopFILE() is CopFILE for output (caller, die, warn, etc.) */
535 #define OutCopFILE(c) CopFILE(c)
537 #define CopHINTS_get(c) ((c)->cop_hints + 0)
538 #define CopHINTS_set(c, h) STMT_START { \
539 (c)->cop_hints = (h); \
543 * Here we have some enormously heavy (or at least ponderous) wizardry.
546 /* subroutine context */
548 OP * retop; /* op to execute on exit from sub */
549 /* Above here is the same for sub, format and eval. */
551 /* Above here is the same for sub and format. */
560 struct block_format {
561 OP * retop; /* op to execute on exit from sub */
562 /* Above here is the same for sub, format and eval. */
564 /* Above here is the same for sub and format. */
569 /* base for the next two macros. Don't use directly.
570 * Note that the refcnt of the cv is incremented twice; The CX one is
571 * decremented by LEAVESUB, the other by LEAVE. */
573 #define PUSHSUB_BASE(cx) \
574 ENTRY_PROBE(CvNAMED(cv) \
575 ? HEK_KEY(CvNAME_HEK(cv)) \
576 : GvENAME(CvGV(cv)), \
577 CopFILE((const COP *)CvSTART(cv)), \
578 CopLINE((const COP *)CvSTART(cv)), \
579 CopSTASHPV((const COP *)CvSTART(cv))); \
581 cx->blk_sub.cv = cv; \
582 cx->blk_sub.olddepth = CvDEPTH(cv); \
583 cx->cx_type |= (hasargs) ? CXp_HASARGS : 0; \
584 cx->blk_sub.retop = NULL; \
585 if (!CvDEPTH(cv)) { \
586 SvREFCNT_inc_simple_void_NN(cv); \
587 SvREFCNT_inc_simple_void_NN(cv); \
591 #define PUSHSUB_GET_LVALUE_MASK(func) \
592 /* If the context is indeterminate, then only the lvalue */ \
593 /* flags that the caller also has are applicable. */ \
595 (PL_op->op_flags & OPf_WANT) \
596 ? OPpENTERSUB_LVAL_MASK \
597 : !(PL_op->op_private & OPpENTERSUB_LVAL_MASK) \
598 ? 0 : (U8)func(aTHX) \
601 #define PUSHSUB(cx) \
603 U8 phlags = PUSHSUB_GET_LVALUE_MASK(Perl_was_lvalue_sub); \
605 cx->blk_u16 = PL_op->op_private & \
609 /* variant for use by OP_DBSTATE, where op_private holds hint bits */
610 #define PUSHSUB_DB(cx) \
615 #define PUSHFORMAT(cx, retop) \
616 cx->blk_format.cv = cv; \
617 cx->blk_format.gv = gv; \
618 cx->blk_format.retop = (retop); \
619 cx->blk_format.dfoutgv = PL_defoutgv; \
620 if (!CvDEPTH(cv)) SvREFCNT_inc_simple_void_NN(cv); \
622 SvREFCNT_inc_void(cx->blk_format.dfoutgv)
624 #define POP_SAVEARRAY() \
626 SvREFCNT_dec(GvAV(PL_defgv)); \
627 GvAV(PL_defgv) = cx->blk_sub.savearray; \
630 /* junk in @_ spells trouble when cloning CVs and in pp_caller(), so don't
631 * leave any (a fast av_clear(ary), basically) */
632 #define CLEAR_ARGARRAY(ary) \
634 AvMAX(ary) += AvARRAY(ary) - AvALLOC(ary); \
635 AvARRAY(ary) = AvALLOC(ary); \
639 #define POPSUB(cx,sv) \
641 const I32 olddepth = cx->blk_sub.olddepth; \
642 RETURN_PROBE(CvNAMED(cx->blk_sub.cv) \
643 ? HEK_KEY(CvNAME_HEK(cx->blk_sub.cv)) \
644 : GvENAME(CvGV(cx->blk_sub.cv)), \
645 CopFILE((COP*)CvSTART((const CV*)cx->blk_sub.cv)), \
646 CopLINE((COP*)CvSTART((const CV*)cx->blk_sub.cv)), \
647 CopSTASHPV((COP*)CvSTART((const CV*)cx->blk_sub.cv))); \
649 if (CxHASARGS(cx)) { \
651 /* abandon @_ if it got reified */ \
652 if (AvREAL(cx->blk_sub.argarray)) { \
653 const SSize_t fill = AvFILLp(cx->blk_sub.argarray); \
654 SvREFCNT_dec_NN(cx->blk_sub.argarray); \
655 cx->blk_sub.argarray = newAV(); \
656 av_extend(cx->blk_sub.argarray, fill); \
657 AvREIFY_only(cx->blk_sub.argarray); \
658 CX_CURPAD_SV(cx->blk_sub, 0) = MUTABLE_SV(cx->blk_sub.argarray); \
661 CLEAR_ARGARRAY(cx->blk_sub.argarray); \
664 sv = MUTABLE_SV(cx->blk_sub.cv); \
665 LEAVE_SCOPE(PL_scopestack[cx->blk_oldscopesp-1]); \
666 if (sv && (CvDEPTH((const CV*)sv) = olddepth)) \
670 #define LEAVESUB(sv) \
675 #define POPFORMAT(cx) \
677 CV * const cv = cx->blk_format.cv; \
678 GV * const dfuot = cx->blk_format.dfoutgv; \
680 LEAVE_SCOPE(PL_scopestack[cx->blk_oldscopesp-1]); \
681 if (!--CvDEPTH(cv)) \
682 SvREFCNT_dec_NN(cx->blk_format.cv); \
683 SvREFCNT_dec_NN(dfuot); \
688 OP * retop; /* op to execute on exit from eval */
689 /* Above here is the same for sub, format and eval. */
694 JMPENV * cur_top_env; /* value of PL_top_env when eval CX created */
697 /* If we ever need more than 512 op types, change the shift from 7.
698 blku_gimme is actually also only 2 bits, so could be merged with something.
701 #define CxOLD_IN_EVAL(cx) (((cx)->blk_u16) & 0x7F)
702 #define CxOLD_OP_TYPE(cx) (((cx)->blk_u16) >> 7)
704 #define PUSHEVAL(cx,n) \
706 assert(!(PL_in_eval & ~0x7F)); \
707 assert(!(PL_op->op_type & ~0x1FF)); \
708 cx->blk_u16 = (PL_in_eval & 0x7F) | ((U16)PL_op->op_type << 7); \
709 cx->blk_eval.old_namesv = (n ? newSVpv(n,0) : NULL); \
710 cx->blk_eval.old_eval_root = PL_eval_root; \
711 cx->blk_eval.cur_text = PL_parser ? PL_parser->linestr : NULL; \
712 cx->blk_eval.cv = NULL; /* set by doeval(), as applicable */ \
713 cx->blk_eval.retop = NULL; \
714 cx->blk_eval.cur_top_env = PL_top_env; \
717 #define POPEVAL(cx) \
719 PL_in_eval = CxOLD_IN_EVAL(cx); \
720 optype = CxOLD_OP_TYPE(cx); \
721 PL_eval_root = cx->blk_eval.old_eval_root; \
722 if (cx->blk_eval.cur_text && SvSCREAM(cx->blk_eval.cur_text)) \
723 SvREFCNT_dec_NN(cx->blk_eval.cur_text); \
724 if (cx->blk_eval.old_namesv) \
725 sv_2mortal(cx->blk_eval.old_namesv); \
731 LOOP * my_op; /* My op, that contains redo, next and last ops. */
732 union { /* different ways of locating the iteration variable */
735 PAD *oldcomppad; /* only used in ITHREADS */
738 struct { /* valid if type is LOOP_FOR or LOOP_PLAIN (but {NULL,0})*/
739 AV * ary; /* use the stack if this is NULL */
742 struct { /* valid if type is LOOP_LAZYIV */
746 struct { /* valid if type if LOOP_LAZYSV */
748 SV * end; /* maxiumum value (or minimum in reverse) */
754 # define CxITERVAR_PADSV(c) \
755 &CX_CURPAD_SV( (c)->blk_loop.itervar_u, (c)->blk_loop.my_op->op_targ)
757 # define CxITERVAR_PADSV(c) ((c)->blk_loop.itervar_u.svp)
760 #define CxITERVAR(c) \
761 ((c)->blk_loop.itervar_u.oldcomppad \
763 ? CxITERVAR_PADSV(c) \
764 : &GvSV((c)->blk_loop.itervar_u.gv)) \
767 #define CxLABEL(c) (0 + CopLABEL((c)->blk_oldcop))
768 #define CxLABEL_len(c,len) (0 + CopLABEL_len((c)->blk_oldcop, len))
769 #define CxLABEL_len_flags(c,len,flags) (0 + CopLABEL_len_flags((c)->blk_oldcop, len, flags))
770 #define CxHASARGS(c) (((c)->cx_type & CXp_HASARGS) == CXp_HASARGS)
771 #define CxLVAL(c) (0 + (c)->blk_u16)
773 #define PUSHLOOP_PLAIN(cx, s) \
774 cx->blk_loop.resetsp = s - PL_stack_base; \
775 cx->blk_loop.my_op = cLOOP; \
776 cx->blk_loop.state_u.ary.ary = NULL; \
777 cx->blk_loop.state_u.ary.ix = 0; \
778 cx->blk_loop.itervar_u.svp = NULL;
780 #define PUSHLOOP_FOR(cx, ivar, s) \
781 cx->blk_loop.resetsp = s - PL_stack_base; \
782 cx->blk_loop.my_op = cLOOP; \
783 cx->blk_loop.state_u.ary.ary = NULL; \
784 cx->blk_loop.state_u.ary.ix = 0; \
785 cx->blk_loop.itervar_u.svp = (SV**)(ivar);
787 #define POPLOOP(cx) \
788 if (CxTYPE(cx) == CXt_LOOP_LAZYSV) { \
789 SvREFCNT_dec_NN(cx->blk_loop.state_u.lazysv.cur); \
790 SvREFCNT_dec_NN(cx->blk_loop.state_u.lazysv.end); \
792 if (CxTYPE(cx) == CXt_LOOP_FOR) \
793 SvREFCNT_dec(cx->blk_loop.state_u.ary.ary);
795 /* given/when context */
796 struct block_givwhen {
800 #define PUSHGIVEN(cx) \
801 cx->blk_givwhen.leave_op = cLOGOP->op_other;
803 #define PUSHWHEN PUSHGIVEN
805 /* context common to subroutines, evals and loops */
807 U8 blku_type; /* what kind of context this is */
808 U8 blku_gimme; /* is this block running in list context? */
809 U16 blku_u16; /* used by block_sub and block_eval (so far) */
810 I32 blku_oldsp; /* stack pointer to copy stuff down to */
811 COP * blku_oldcop; /* old curcop pointer */
812 I32 blku_oldmarksp; /* mark stack index */
813 I32 blku_oldscopesp; /* scope stack index */
814 PMOP * blku_oldpm; /* values of pattern match vars */
817 struct block_sub blku_sub;
818 struct block_format blku_format;
819 struct block_eval blku_eval;
820 struct block_loop blku_loop;
821 struct block_givwhen blku_givwhen;
824 #define blk_oldsp cx_u.cx_blk.blku_oldsp
825 #define blk_oldcop cx_u.cx_blk.blku_oldcop
826 #define blk_oldmarksp cx_u.cx_blk.blku_oldmarksp
827 #define blk_oldscopesp cx_u.cx_blk.blku_oldscopesp
828 #define blk_oldpm cx_u.cx_blk.blku_oldpm
829 #define blk_gimme cx_u.cx_blk.blku_gimme
830 #define blk_u16 cx_u.cx_blk.blku_u16
831 #define blk_sub cx_u.cx_blk.blk_u.blku_sub
832 #define blk_format cx_u.cx_blk.blk_u.blku_format
833 #define blk_eval cx_u.cx_blk.blk_u.blku_eval
834 #define blk_loop cx_u.cx_blk.blk_u.blku_loop
835 #define blk_givwhen cx_u.cx_blk.blk_u.blku_givwhen
837 #define DEBUG_CX(action) \
839 Perl_deb(aTHX_ "CX %ld %s %s (scope %ld,%ld) at %s:%d\n", \
842 PL_block_type[CxTYPE(&cxstack[cxstack_ix])], \
843 (long)PL_scopestack_ix, \
844 (long)(cxstack[cxstack_ix].blk_oldscopesp), \
845 __FILE__, __LINE__));
848 #define PUSHBLOCK(cx,t,sp) CXINC, cx = &cxstack[cxstack_ix], \
850 cx->blk_oldsp = sp - PL_stack_base, \
851 cx->blk_oldcop = PL_curcop, \
852 cx->blk_oldmarksp = PL_markstack_ptr - PL_markstack, \
853 cx->blk_oldscopesp = PL_scopestack_ix, \
854 cx->blk_oldpm = PL_curpm, \
855 cx->blk_gimme = (U8)gimme; \
858 /* Exit a block (RETURN and LAST). */
859 #define POPBLOCK(cx,pm) \
861 cx = &cxstack[cxstack_ix--], \
862 newsp = PL_stack_base + cx->blk_oldsp, \
863 PL_curcop = cx->blk_oldcop, \
864 PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \
865 PL_scopestack_ix = cx->blk_oldscopesp, \
866 pm = cx->blk_oldpm, \
867 gimme = cx->blk_gimme;
869 /* Continue a block elsewhere (NEXT and REDO). */
870 #define TOPBLOCK(cx) \
872 cx = &cxstack[cxstack_ix], \
873 PL_stack_sp = PL_stack_base + cx->blk_oldsp, \
874 PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \
875 PL_scopestack_ix = cx->blk_oldscopesp, \
876 PL_curpm = cx->blk_oldpm;
878 /* substitution context */
880 U8 sbu_type; /* what kind of context this is */
882 U16 sbu_rxtainted; /* matches struct block */
895 #define sb_iters cx_u.cx_subst.sbu_iters
896 #define sb_maxiters cx_u.cx_subst.sbu_maxiters
897 #define sb_rflags cx_u.cx_subst.sbu_rflags
898 #define sb_oldsave cx_u.cx_subst.sbu_oldsave
899 #define sb_rxtainted cx_u.cx_subst.sbu_rxtainted
900 #define sb_orig cx_u.cx_subst.sbu_orig
901 #define sb_dstr cx_u.cx_subst.sbu_dstr
902 #define sb_targ cx_u.cx_subst.sbu_targ
903 #define sb_s cx_u.cx_subst.sbu_s
904 #define sb_m cx_u.cx_subst.sbu_m
905 #define sb_strend cx_u.cx_subst.sbu_strend
906 #define sb_rxres cx_u.cx_subst.sbu_rxres
907 #define sb_rx cx_u.cx_subst.sbu_rx
910 # define PUSHSUBST(cx) CXINC, cx = &cxstack[cxstack_ix], \
911 cx->sb_iters = iters, \
912 cx->sb_maxiters = maxiters, \
913 cx->sb_rflags = r_flags, \
914 cx->sb_oldsave = oldsave, \
915 cx->sb_rxtainted = rxtainted, \
916 cx->sb_orig = orig, \
917 cx->sb_dstr = dstr, \
918 cx->sb_targ = targ, \
921 cx->sb_strend = strend, \
922 cx->sb_rxres = NULL, \
924 cx->cx_type = CXt_SUBST | (once ? CXp_ONCE : 0); \
925 rxres_save(&cx->sb_rxres, rx); \
926 (void)ReREFCNT_inc(rx)
928 # define POPSUBST(cx) cx = &cxstack[cxstack_ix--]; \
929 rxres_free(&cx->sb_rxres); \
930 ReREFCNT_dec(cx->sb_rx)
933 #define CxONCE(cx) ((cx)->cx_type & CXp_ONCE)
938 struct subst cx_subst;
941 #define cx_type cx_u.cx_subst.sbu_type
943 /* If you re-order these, there is also an array of uppercase names in perl.h
944 and a static array of context names in pp_ctl.c */
945 #define CXTYPEMASK 0xf
949 /* When micro-optimising :-) keep GIVEN next to the LOOPs, as these 5 share a
950 jump table in pp_ctl.c
951 The first 4 don't have a 'case' in at least one switch statement in pp_ctl.c
954 /* This is first so that CXt_LOOP_FOR|CXt_LOOP_LAZYIV is CXt_LOOP_LAZYIV */
955 #define CXt_LOOP_FOR 4
956 #define CXt_LOOP_PLAIN 5
957 #define CXt_LOOP_LAZYSV 6
958 #define CXt_LOOP_LAZYIV 7
963 /* SUBST doesn't feature in all switch statements. */
965 /* private flags for CXt_SUB and CXt_NULL
966 However, this is checked in many places which do not check the type, so
967 this bit needs to be kept clear for most everything else. For reasons I
968 haven't investigated, it can coexist with CXp_FOR_DEF */
969 #define CXp_MULTICALL 0x10 /* part of a multicall (so don't
970 tear down context on exit). */
972 /* private flags for CXt_SUB and CXt_FORMAT */
973 #define CXp_HASARGS 0x20
974 #define CXp_SUB_RE 0x40 /* code called within regex, i.e. (?{}) */
975 #define CXp_SUB_RE_FAKE 0x80 /* fake sub CX for (?{}) in current scope */
977 /* private flags for CXt_EVAL */
978 #define CXp_REAL 0x20 /* truly eval'', not a lookalike */
979 #define CXp_TRYBLOCK 0x40 /* eval{}, not eval'' or similar */
981 /* private flags for CXt_LOOP */
982 #define CXp_FOR_DEF 0x10 /* foreach using $_ */
983 #define CxPADLOOP(c) ((c)->blk_loop.my_op->op_targ)
985 /* private flags for CXt_SUBST */
986 #define CXp_ONCE 0x10 /* What was sbu_once in struct subst */
988 #define CxTYPE(c) ((c)->cx_type & CXTYPEMASK)
989 #define CxTYPE_is_LOOP(c) (((c)->cx_type & 0xC) == 0x4)
990 #define CxMULTICALL(c) (((c)->cx_type & CXp_MULTICALL) \
992 #define CxREALEVAL(c) (((c)->cx_type & (CXTYPEMASK|CXp_REAL)) \
993 == (CXt_EVAL|CXp_REAL))
994 #define CxTRYBLOCK(c) (((c)->cx_type & (CXTYPEMASK|CXp_TRYBLOCK)) \
995 == (CXt_EVAL|CXp_TRYBLOCK))
996 #define CxFOREACH(c) (CxTYPE_is_LOOP(c) && CxTYPE(c) != CXt_LOOP_PLAIN)
997 #define CxFOREACHDEF(c) ((CxTYPE_is_LOOP(c) && CxTYPE(c) != CXt_LOOP_PLAIN) \
998 && ((c)->cx_type & CXp_FOR_DEF))
1000 #define CXINC (cxstack_ix < cxstack_max ? ++cxstack_ix : (cxstack_ix = cxinc()))
1003 =head1 "Gimme" Values
1007 =for apidoc AmU||G_SCALAR
1008 Used to indicate scalar context. See C<GIMME_V>, C<GIMME>, and
1011 =for apidoc AmU||G_ARRAY
1012 Used to indicate list context. See C<GIMME_V>, C<GIMME> and
1015 =for apidoc AmU||G_VOID
1016 Used to indicate void context. See C<GIMME_V> and L<perlcall>.
1018 =for apidoc AmU||G_DISCARD
1019 Indicates that arguments returned from a callback should be discarded. See
1022 =for apidoc AmU||G_EVAL
1024 Used to force a Perl C<eval> wrapper around a callback. See
1027 =for apidoc AmU||G_NOARGS
1029 Indicates that no arguments are being sent to a callback. See
1040 /* extra flags for Perl_call_* routines */
1041 #define G_DISCARD 4 /* Call FREETMPS.
1042 Don't change this without consulting the
1043 hash actions codes defined in hv.h */
1044 #define G_EVAL 8 /* Assume eval {} around subroutine call. */
1045 #define G_NOARGS 16 /* Don't construct a @_ array. */
1046 #define G_KEEPERR 32 /* Warn for errors, don't overwrite $@ */
1047 #define G_NODEBUG 64 /* Disable debugging at toplevel. */
1048 #define G_METHOD 128 /* Calling method. */
1049 #define G_FAKINGEVAL 256 /* Faking an eval context for call_sv or
1051 #define G_UNDEF_FILL 512 /* Fill the stack with &PL_sv_undef
1052 A special case for UNSHIFT in
1053 Perl_magic_methcall(). */
1054 #define G_WRITING_TO_STDERR 1024 /* Perl_write_to_stderr() is calling
1055 Perl_magic_methcall(). */
1056 #define G_RE_REPARSING 0x800 /* compiling a run-time /(?{..})/ */
1057 #define G_METHOD_NAMED 4096 /* calling named method, eg without :: or ' */
1059 /* flag bits for PL_in_eval */
1060 #define EVAL_NULL 0 /* not in an eval */
1061 #define EVAL_INEVAL 1 /* some enclosing scope is an eval */
1062 #define EVAL_WARNONLY 2 /* used by yywarn() when calling yyerror() */
1063 #define EVAL_KEEPERR 4 /* set by Perl_call_sv if G_KEEPERR */
1064 #define EVAL_INREQUIRE 8 /* The code is being required. */
1065 #define EVAL_RE_REPARSING 0x10 /* eval_sv() called with G_RE_REPARSING */
1067 /* Support for switching (stack and block) contexts.
1068 * This ensures magic doesn't invalidate local stack and cx pointers.
1071 #define PERLSI_UNKNOWN -1
1072 #define PERLSI_UNDEF 0
1073 #define PERLSI_MAIN 1
1074 #define PERLSI_MAGIC 2
1075 #define PERLSI_SORT 3
1076 #define PERLSI_SIGNAL 4
1077 #define PERLSI_OVERLOAD 5
1078 #define PERLSI_DESTROY 6
1079 #define PERLSI_WARNHOOK 7
1080 #define PERLSI_DIEHOOK 8
1081 #define PERLSI_REQUIRE 9
1084 AV * si_stack; /* stack for current runlevel */
1085 PERL_CONTEXT * si_cxstack; /* context stack for runlevel */
1086 struct stackinfo * si_prev;
1087 struct stackinfo * si_next;
1088 I32 si_cxix; /* current context index */
1089 I32 si_cxmax; /* maximum allocated index */
1090 I32 si_type; /* type of runlevel */
1091 I32 si_markoff; /* offset where markstack begins for us.
1092 * currently used only with DEBUGGING,
1093 * but not #ifdef-ed for bincompat */
1096 typedef struct stackinfo PERL_SI;
1098 #define cxstack (PL_curstackinfo->si_cxstack)
1099 #define cxstack_ix (PL_curstackinfo->si_cxix)
1100 #define cxstack_max (PL_curstackinfo->si_cxmax)
1103 # define SET_MARK_OFFSET \
1104 PL_curstackinfo->si_markoff = PL_markstack_ptr - PL_markstack
1106 # define SET_MARK_OFFSET NOOP
1109 #define PUSHSTACKi(type) \
1111 PERL_SI *next = PL_curstackinfo->si_next; \
1113 int i = 0; PERL_SI *p = PL_curstackinfo; \
1114 while (p) { i++; p = p->si_prev; } \
1115 Perl_deb(aTHX_ "push STACKINFO %d at %s:%d\n", \
1116 i, __FILE__, __LINE__);}) \
1118 next = new_stackinfo(32, 2048/sizeof(PERL_CONTEXT) - 1); \
1119 next->si_prev = PL_curstackinfo; \
1120 PL_curstackinfo->si_next = next; \
1122 next->si_type = type; \
1123 next->si_cxix = -1; \
1124 AvFILLp(next->si_stack) = 0; \
1125 SWITCHSTACK(PL_curstack,next->si_stack); \
1126 PL_curstackinfo = next; \
1130 #define PUSHSTACK PUSHSTACKi(PERLSI_UNKNOWN)
1132 /* POPSTACK works with PL_stack_sp, so it may need to be bracketed by
1133 * PUTBACK/SPAGAIN to flush/refresh any local SP that may be active */
1137 PERL_SI * const prev = PL_curstackinfo->si_prev; \
1139 int i = -1; PERL_SI *p = PL_curstackinfo; \
1140 while (p) { i++; p = p->si_prev; } \
1141 Perl_deb(aTHX_ "pop STACKINFO %d at %s:%d\n", \
1142 i, __FILE__, __LINE__);}) \
1144 Perl_croak_popstack(); \
1146 SWITCHSTACK(PL_curstack,prev->si_stack); \
1147 /* don't free prev here, free them all at the END{} */ \
1148 PL_curstackinfo = prev; \
1151 #define POPSTACK_TO(s) \
1153 while (PL_curstack != s) { \
1159 #define IN_PERL_COMPILETIME (PL_curcop == &PL_compiling)
1160 #define IN_PERL_RUNTIME (PL_curcop != &PL_compiling)
1163 =head1 Multicall Functions
1165 =for apidoc Ams||dMULTICALL
1166 Declare local variables for a multicall. See L<perlcall/LIGHTWEIGHT CALLBACKS>.
1168 =for apidoc Ams||PUSH_MULTICALL
1169 Opening bracket for a lightweight callback.
1170 See L<perlcall/LIGHTWEIGHT CALLBACKS>.
1172 =for apidoc Ams||MULTICALL
1173 Make a lightweight callback. See L<perlcall/LIGHTWEIGHT CALLBACKS>.
1175 =for apidoc Ams||POP_MULTICALL
1176 Closing bracket for a lightweight callback.
1177 See L<perlcall/LIGHTWEIGHT CALLBACKS>.
1182 #define dMULTICALL \
1183 SV **newsp; /* set by POPBLOCK */ \
1186 OP *multicall_cop; \
1187 bool multicall_oldcatch; \
1188 U8 hasargs = 0 /* used by PUSHSUB */
1190 #define PUSH_MULTICALL(the_cv) \
1191 PUSH_MULTICALL_FLAGS(the_cv, 0)
1193 /* Like PUSH_MULTICALL, but allows you to specify extra flags
1194 * for the CX stack entry (this isn't part of the public API) */
1196 #define PUSH_MULTICALL_FLAGS(the_cv, flags) \
1198 CV * const _nOnclAshIngNamE_ = the_cv; \
1199 CV * const cv = _nOnclAshIngNamE_; \
1200 PADLIST * const padlist = CvPADLIST(cv); \
1202 multicall_oldcatch = CATCH_GET; \
1203 SAVETMPS; SAVEVPTR(PL_op); \
1205 PUSHSTACKi(PERLSI_SORT); \
1206 PUSHBLOCK(cx, (CXt_SUB|CXp_MULTICALL|flags), PL_stack_sp); \
1208 if (!(flags & CXp_SUB_RE_FAKE)) \
1210 if (CvDEPTH(cv) >= 2) { \
1211 PERL_STACK_OVERFLOW_CHECK(); \
1212 Perl_pad_push(aTHX_ padlist, CvDEPTH(cv)); \
1215 PAD_SET_CUR_NOSAVE(padlist, CvDEPTH(cv)); \
1216 multicall_cv = cv; \
1217 multicall_cop = CvSTART(cv); \
1222 PL_op = multicall_cop; \
1226 #define POP_MULTICALL \
1228 cx = &cxstack[cxstack_ix]; \
1229 if (! ((CvDEPTH(multicall_cv) = cx->blk_sub.olddepth)) ) { \
1230 LEAVESUB(multicall_cv); \
1232 POPBLOCK(cx,PL_curpm); \
1234 CATCH_SET(multicall_oldcatch); \
1239 /* Change the CV of an already-pushed MULTICALL CxSUB block.
1240 * (this isn't part of the public API) */
1242 #define CHANGE_MULTICALL_FLAGS(the_cv, flags) \
1244 CV * const _nOnclAshIngNamE_ = the_cv; \
1245 CV * const cv = _nOnclAshIngNamE_; \
1246 PADLIST * const padlist = CvPADLIST(cv); \
1247 cx = &cxstack[cxstack_ix]; \
1248 assert(cx->cx_type & CXp_MULTICALL); \
1249 if (! ((CvDEPTH(multicall_cv) = cx->blk_sub.olddepth)) ) { \
1250 LEAVESUB(multicall_cv); \
1252 cx->cx_type = (CXt_SUB|CXp_MULTICALL|flags); \
1254 if (!(flags & CXp_SUB_RE_FAKE)) \
1256 if (CvDEPTH(cv) >= 2) { \
1257 PERL_STACK_OVERFLOW_CHECK(); \
1258 Perl_pad_push(aTHX_ padlist, CvDEPTH(cv)); \
1261 PAD_SET_CUR_NOSAVE(padlist, CvDEPTH(cv)); \
1262 multicall_cv = cv; \
1263 multicall_cop = CvSTART(cv); \
1267 * c-indentation-style: bsd
1269 * indent-tabs-mode: nil
1272 * ex: set ts=8 sts=4 sw=4 et: