3 * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
4 * 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 by Larry Wall and others
6 * You may distribute under the terms of either the GNU General Public
7 * License or the Artistic License, as specified in the README file.
12 * The fields of BASEOP are:
13 * op_next Pointer to next ppcode to execute after this one.
14 * (Top level pre-grafted op points to first op,
15 * but this is replaced when op is grafted in, when
16 * this op will point to the real next op, and the new
17 * parent takes over role of remembering starting op.)
18 * op_ppaddr Pointer to current ppcode's function.
19 * op_type The type of the operation.
20 * op_opt Whether or not the op has been optimised by the
22 * op_slabbed allocated via opslab
23 * op_static tell op_free() to skip PerlMemShared_free(), when
25 * op_savefree on savestack via SAVEFREEOP
26 * op_spare Three spare bits
27 * op_flags Flags common to all operations. See OPf_* below.
28 * op_private Flags peculiar to a particular operation (BUT,
29 * by default, set to the number of children until
30 * the operation is privatized by a check routine,
31 * which may or may not check number of children).
33 #include "op_reg_common.h"
38 # define MADPROP_IN_BASEOP MADPROP* op_madprop;
40 # define MADPROP_IN_BASEOP
43 typedef PERL_BITFIELD16 Optype;
45 #ifdef BASEOP_DEFINITION
46 #define BASEOP BASEOP_DEFINITION
51 OP* (*op_ppaddr)(pTHX); \
54 PERL_BITFIELD16 op_type:9; \
55 PERL_BITFIELD16 op_opt:1; \
56 PERL_BITFIELD16 op_slabbed:1; \
57 PERL_BITFIELD16 op_savefree:1; \
58 PERL_BITFIELD16 op_static:1; \
59 PERL_BITFIELD16 op_spare:3; \
64 /* If op_type:9 is changed to :10, also change PUSHEVAL in cop.h.
65 Also, if the type of op_type is ever changed (e.g. to PERL_BITFIELD32)
66 then all the other bit-fields before/after it should change their
67 types too to let VC pack them into the same 4 byte integer.*/
69 /* for efficiency, requires OPf_WANT_VOID == G_VOID etc */
70 #define OP_GIMME(op,dfl) \
71 (((op)->op_flags & OPf_WANT) ? ((op)->op_flags & OPf_WANT) : dfl)
73 #define OP_GIMME_REVERSE(flags) ((flags) & G_WANT)
78 =for apidoc Amn|U32|GIMME_V
79 The XSUB-writer's equivalent to Perl's C<wantarray>. Returns C<G_VOID>,
80 C<G_SCALAR> or C<G_ARRAY> for void, scalar or list context,
81 respectively. See L<perlcall> for a usage example.
83 =for apidoc Amn|U32|GIMME
84 A backward-compatible version of C<GIMME_V> which can only return
85 C<G_SCALAR> or C<G_ARRAY>; in a void context, it returns C<G_SCALAR>.
86 Deprecated. Use C<GIMME_V> instead.
91 #define GIMME_V OP_GIMME(PL_op, block_gimme())
95 #define OPf_WANT 3 /* Mask for "want" bits: */
96 #define OPf_WANT_VOID 1 /* Want nothing */
97 #define OPf_WANT_SCALAR 2 /* Want single value */
98 #define OPf_WANT_LIST 3 /* Want list of any length */
99 #define OPf_KIDS 4 /* There is a firstborn child. */
100 #define OPf_PARENS 8 /* This operator was parenthesized. */
101 /* (Or block needs explicit scope entry.) */
102 #define OPf_REF 16 /* Certified reference. */
103 /* (Return container, not containee). */
104 #define OPf_MOD 32 /* Will modify (lvalue). */
105 #define OPf_STACKED 64 /* Some arg is arriving on the stack. */
106 #define OPf_SPECIAL 128 /* Do something weird for this op: */
107 /* On local LVAL, don't init local value. */
108 /* On OP_SORT, subroutine is inlined. */
109 /* On OP_NOT, inversion was implicit. */
110 /* On OP_LEAVE, don't restore curpm. */
111 /* On truncate, we truncate filehandle */
112 /* On control verbs, we saw no label */
113 /* On flipflop, we saw ... instead of .. */
114 /* On UNOPs, saw bare parens, e.g. eof(). */
115 /* On OP_ENTERSUB || OP_NULL, saw a "do". */
116 /* On OP_EXISTS, treat av as av, not avhv. */
117 /* On OP_(ENTER|LEAVE)EVAL, don't clear $@ */
118 /* On pushre, rx is used as part of split, e.g. split " " */
119 /* On regcomp, "use re 'eval'" was in scope */
120 /* On OP_READLINE, was <$filehandle> */
121 /* On RV2[ACGHS]V, don't create GV--in
123 /* On OP_DBSTATE, indicates breakpoint
124 * (runtime property) */
125 /* On OP_REQUIRE, was seen as CORE::require */
126 /* On OP_(ENTER|LEAVE)WHEN, there's
128 /* On OP_SMARTMATCH, an implicit smartmatch */
129 /* On OP_ANONHASH and OP_ANONLIST, create a
130 reference to the new anon hash or array */
131 /* On OP_HELEM and OP_HSLICE, localization will be followed
132 by assignment, so do not wipe the target if it is special
133 (e.g. a glob or a magic SV) */
134 /* On OP_MATCH, OP_SUBST & OP_TRANS, the
135 operand of a logical or conditional
136 that was optimised away, so it should
137 not be bound via =~ */
138 /* On OP_CONST, from a constant CV */
139 /* On OP_GLOB, two meanings:
140 - Before ck_glob, called as CORE::glob
141 - After ck_glob, use Perl glob function
143 /* On OP_PADRANGE, push @_ */
145 /* old names; don't use in new code, but don't break them, either */
146 #define OPf_LIST OPf_WANT_LIST
147 #define OPf_KNOW OPf_WANT
150 (PL_op->op_flags & OPf_WANT \
151 ? ((PL_op->op_flags & OPf_WANT) == OPf_WANT_LIST \
156 /* Lower bits of op_private often carry the number of arguments, as
157 * set by newBINOP, newUNOP and ck_fun */
159 /* NOTE: OP_NEXTSTATE and OP_DBSTATE (i.e. COPs) carry NATIVE_HINTS
162 /* Private for lvalues */
163 #define OPpLVAL_INTRO 128 /* Lvalue must be localized or lvalue sub */
165 /* Private for OPs with TARGLEX */
166 /* (lower bits may carry MAXARG) */
167 #define OPpTARGET_MY 16 /* Target is PADMY. */
169 /* Private for OP_LEAVE, OP_LEAVESUB, OP_LEAVESUBLV and OP_LEAVEWRITE */
170 #define OPpREFCOUNTED 64 /* op_targ carries a refcount */
172 /* Private for OP_AASSIGN */
173 #define OPpASSIGN_COMMON 64 /* Left & right have syms in common. */
175 /* Private for OP_SASSIGN */
176 #define OPpASSIGN_BACKWARDS 64 /* Left & right switched. */
177 #define OPpASSIGN_CV_TO_GV 128 /* Possible optimisation for constants. */
179 /* Private for OP_MATCH and OP_SUBST{,CONT} */
180 #define OPpRUNTIME 64 /* Pattern coming in on the stack */
182 /* Private for OP_TRANS */
183 #define OPpTRANS_FROM_UTF 1
184 #define OPpTRANS_TO_UTF 2
185 #define OPpTRANS_IDENTICAL 4 /* right side is same as left */
186 #define OPpTRANS_SQUASH 8
187 /* 16 is used for OPpTARGET_MY */
188 #define OPpTRANS_COMPLEMENT 32
189 #define OPpTRANS_GROWS 64
190 #define OPpTRANS_DELETE 128
191 #define OPpTRANS_ALL (OPpTRANS_FROM_UTF|OPpTRANS_TO_UTF|OPpTRANS_IDENTICAL|OPpTRANS_SQUASH|OPpTRANS_COMPLEMENT|OPpTRANS_GROWS|OPpTRANS_DELETE)
193 /* Private for OP_REPEAT */
194 #define OPpREPEAT_DOLIST 64 /* List replication. */
196 /* Private for OP_RV2GV, OP_RV2SV, OP_AELEM, OP_HELEM, OP_PADSV */
197 #define OPpDEREF (32|64) /* autovivify: Want ref to something: */
198 #define OPpDEREF_AV 32 /* Want ref to AV. */
199 #define OPpDEREF_HV 64 /* Want ref to HV. */
200 #define OPpDEREF_SV (32|64) /* Want ref to SV. */
202 /* OP_ENTERSUB only */
203 #define OPpENTERSUB_DB 16 /* Debug subroutine. */
204 #define OPpENTERSUB_HASTARG 4 /* Called from OP tree. */
205 #define OPpENTERSUB_INARGS 1 /* Lval used as arg to a sub. */
206 /* used by OPpDEREF (32|64) */
207 /* used by HINT_STRICT_REFS 2 */
208 /* Mask for OP_ENTERSUB flags, the absence of which must be propagated
209 in dynamic context */
210 #define OPpENTERSUB_LVAL_MASK (OPpLVAL_INTRO|OPpENTERSUB_INARGS)
213 #define OPpENTERSUB_AMPER 8 /* Used & form to call. */
214 #define OPpENTERSUB_NOPAREN 128 /* bare sub call (without parens) */
215 #define OPpMAY_RETURN_CONSTANT 1 /* If a constant sub, return the constant */
218 #define OPpEARLY_CV 32 /* foo() called before sub foo was parsed */
220 #define OPpLVAL_DEFER 16 /* Defer creation of array/hash elem */
221 /* OP_RV2[SAH]V, OP_GVSV, OP_ENTERITER only */
222 #define OPpOUR_INTRO 16 /* Variable was in an our() */
223 /* OP_RV2[AGH]V, OP_PAD[AH]V, OP_[AH]ELEM, OP_[AH]SLICE OP_AV2ARYLEN,
224 OP_R?KEYS, OP_SUBSTR, OP_POS, OP_VEC */
225 #define OPpMAYBE_LVSUB 8 /* We might be an lvalue to return */
226 /* OP_RV2HV and OP_PADHV */
227 #define OPpTRUEBOOL 32 /* %hash in (%hash || $foo) in
229 #define OPpMAYBE_TRUEBOOL 64 /* %hash in (%hash || $foo) where
230 cx is not known till run time */
233 #define OPpSUBSTR_REPL_FIRST 16 /* 1st arg is replacement string */
236 #define OPpPAD_STATE 16 /* is a "state" pad */
237 /* for OP_RV2?V, lower bits carry hints (currently only HINT_STRICT_REFS) */
239 /* OP_PADRANGE only */
240 /* bit 7 is OPpLVAL_INTRO */
241 #define OPpPADRANGE_COUNTMASK 127 /* bits 6..0 hold target range, */
242 #define OPpPADRANGE_COUNTSHIFT 7 /* 7 bits in total */
245 #define OPpDONT_INIT_GV 4 /* Call gv_fetchpv with GV_NOINIT */
246 /* (Therefore will return whatever is currently in the symbol table, not
247 guaranteed to be a PVGV) */
248 #define OPpALLOW_FAKE 16 /* OK to return fake glob */
250 /* Private for OP_ENTERITER and OP_ITER */
251 #define OPpITER_REVERSED 4 /* for (reverse ...) */
252 #define OPpITER_DEF 8 /* for $_ or for my $_ */
254 /* Private for OP_CONST */
255 #define OPpCONST_NOVER 2 /* no 6; */
256 #define OPpCONST_SHORTCIRCUIT 4 /* eg the constant 5 in (5 || foo) */
257 #define OPpCONST_STRICT 8 /* bareword subject to strict 'subs' */
258 #define OPpCONST_ENTERED 16 /* Has been entered as symbol. */
259 #define OPpCONST_BARE 64 /* Was a bare word (filehandle?). */
260 #define OPpCONST_FOLDED 128 /* Result of constant folding */
262 /* Private for OP_FLIP/FLOP */
263 #define OPpFLIP_LINENUM 64 /* Range arg potentially a line num. */
265 /* Private for OP_LIST */
266 #define OPpLIST_GUESSED 64 /* Guessed that pushmark was needed. */
268 /* Private for OP_DELETE */
269 #define OPpSLICE 64 /* Operating on a list of keys */
270 /* Also OPpLVAL_INTRO (128) */
272 /* Private for OP_EXISTS */
273 #define OPpEXISTS_SUB 64 /* Checking for &sub, not {} or []. */
275 /* Private for OP_SORT */
276 #define OPpSORT_NUMERIC 1 /* Optimized away { $a <=> $b } */
277 #define OPpSORT_INTEGER 2 /* Ditto while under "use integer" */
278 #define OPpSORT_REVERSE 4 /* Reversed sort */
279 #define OPpSORT_INPLACE 8 /* sort in-place; eg @a = sort @a */
280 #define OPpSORT_DESCEND 16 /* Descending sort */
281 #define OPpSORT_QSORT 32 /* Use quicksort (not mergesort) */
282 #define OPpSORT_STABLE 64 /* Use a stable algorithm */
284 /* Private for OP_REVERSE */
285 #define OPpREVERSE_INPLACE 8 /* reverse in-place (@a = reverse @a) */
287 /* Private for OP_OPEN and OP_BACKTICK */
288 #define OPpOPEN_IN_RAW 16 /* binmode(F,":raw") on input fh */
289 #define OPpOPEN_IN_CRLF 32 /* binmode(F,":crlf") on input fh */
290 #define OPpOPEN_OUT_RAW 64 /* binmode(F,":raw") on output fh */
291 #define OPpOPEN_OUT_CRLF 128 /* binmode(F,":crlf") on output fh */
293 /* Private for OP_EXIT, HUSH also for OP_DIE */
294 #define OPpHUSH_VMSISH 64 /* hush DCL exit msg vmsish mode*/
295 #define OPpEXIT_VMSISH 128 /* exit(0) vs. exit(1) vmsish mode*/
297 /* Private for OP_FTXXX */
298 #define OPpFT_ACCESS 2 /* use filetest 'access' */
299 #define OPpFT_STACKED 4 /* stacked filetest, as "-f" in "-f -x $f" */
300 #define OPpFT_STACKING 8 /* stacking filetest, as "-x" in "-f -x $f" */
301 #define OPpFT_AFTER_t 16 /* previous op was -t */
303 /* Private for OP_(MAP|GREP)(WHILE|START) */
304 #define OPpGREP_LEX 2 /* iterate over lexical $_ */
306 /* Private for OP_ENTEREVAL */
307 #define OPpEVAL_HAS_HH 2 /* Does it have a copy of %^H */
308 #define OPpEVAL_UNICODE 4
309 #define OPpEVAL_BYTES 8
310 #define OPpEVAL_COPHH 16 /* Construct %^H from cop hints */
311 #define OPpEVAL_RE_REPARSING 32 /* eval_sv(..., G_RE_REPARSING) */
313 /* Private for OP_CALLER, OP_WANTARRAY and OP_RUNCV */
314 #define OPpOFFBYONE 128 /* Treat caller(1) as caller(2) */
316 /* Private for OP_COREARGS */
317 /* These must not conflict with OPpDONT_INIT_GV or OPpALLOW_FAKE.
319 #define OPpCOREARGS_DEREF1 1 /* Arg 1 is a handle constructor */
320 #define OPpCOREARGS_DEREF2 2 /* Arg 2 is a handle constructor */
321 #define OPpCOREARGS_SCALARMOD 64 /* \$ rather than \[$@%*] */
322 #define OPpCOREARGS_PUSHMARK 128 /* Call pp_pushmark */
324 /* Private for OP_(LAST|REDO|NEXT|GOTO|DUMP) */
325 #define OPpPV_IS_UTF8 128 /* label is in UTF8 */
327 /* Private for OP_SPLIT */
328 #define OPpSPLIT_IMPLIM 128 /* implicit limit */
362 PADOFFSET op_pmoffset;
364 REGEXP * op_pmregexp; /* compiled expression */
368 OP * op_pmreplroot; /* For OP_SUBST */
370 PADOFFSET op_pmtargetoff; /* For OP_PUSHRE */
376 OP * op_pmreplstart; /* Only used in OP_SUBST */
378 PADOFFSET op_pmstashoff; /* Only used in OP_MATCH, with PMf_ONCE set */
383 OP * op_code_list; /* list of (?{}) code blocks */
387 #define PM_GETRE(o) (SvTYPE(PL_regex_pad[(o)->op_pmoffset]) == SVt_REGEXP \
388 ? (REGEXP*)(PL_regex_pad[(o)->op_pmoffset]) : NULL)
389 /* The assignment is just to enforce type safety (or at least get a warning).
391 /* With first class regexps not via a reference one needs to assign
392 &PL_sv_undef under ithreads. (This would probably work unthreaded, but NULL
393 is cheaper. I guess we could allow NULL, but the check above would get
394 more complex, and we'd have an AV with (SV*)NULL in it, which feels bad */
395 /* BEWARE - something that calls this macro passes (r) which has a side
397 #define PM_SETRE(o,r) STMT_START { \
398 REGEXP *const _pm_setre = (r); \
400 PL_regex_pad[(o)->op_pmoffset] = MUTABLE_SV(_pm_setre); \
403 #define PM_GETRE(o) ((o)->op_pmregexp)
404 #define PM_SETRE(o,r) ((o)->op_pmregexp = (r))
407 /* Leave some space, so future bit allocations can go either in the shared or
408 * unshared area without affecting binary compatibility */
409 #define PMf_BASE_SHIFT (_RXf_PMf_SHIFT_NEXT+6)
411 /* 'use re "taint"' in scope: taint $1 etc. if target tainted */
412 #define PMf_RETAINT (1<<(PMf_BASE_SHIFT+0))
414 /* match successfully only once per reset, with related flag RXf_USED in
415 * re->extflags holding state. This is used only for ?? matches, and only on
416 * OP_MATCH and OP_QR */
417 #define PMf_ONCE (1<<(PMf_BASE_SHIFT+1))
419 /* PMf_ONCE, i.e. ?pat?, has matched successfully. Not used under threading. */
420 #define PMf_USED (1<<(PMf_BASE_SHIFT+3))
422 /* subst replacement is constant */
423 #define PMf_CONST (1<<(PMf_BASE_SHIFT+4))
425 /* keep 1st runtime pattern forever */
426 #define PMf_KEEP (1<<(PMf_BASE_SHIFT+5))
428 #define PMf_GLOBAL (1<<(PMf_BASE_SHIFT+6)) /* pattern had a g modifier */
430 /* don't reset pos() if //g fails */
431 #define PMf_CONTINUE (1<<(PMf_BASE_SHIFT+7))
433 /* evaluating replacement as expr */
434 #define PMf_EVAL (1<<(PMf_BASE_SHIFT+8))
436 /* Return substituted string instead of modifying it. */
437 #define PMf_NONDESTRUCT (1<<(PMf_BASE_SHIFT+9))
439 /* the pattern has a CV attached (currently only under qr/...(?{}).../) */
440 #define PMf_HAS_CV (1<<(PMf_BASE_SHIFT+10))
442 /* op_code_list is private; don't free it etc. It may well point to
443 * code within another sub, with different pad etc */
444 #define PMf_CODELIST_PRIVATE (1<<(PMf_BASE_SHIFT+11))
446 /* the PMOP is a QR (we should be able to detect that from the op type,
447 * but the regex compilation API passes just the pm flags, not the op
449 #define PMf_IS_QR (1<<(PMf_BASE_SHIFT+12))
450 #define PMf_USE_RE_EVAL (1<<(PMf_BASE_SHIFT+13)) /* use re'eval' in scope */
452 #if PMf_BASE_SHIFT+13 > 31
453 # error Too many PMf_ bits used. See above and regnodes.h for any spare in middle
458 # define PmopSTASH(o) ((o)->op_pmflags & PMf_ONCE \
459 ? PL_stashpad[(o)->op_pmstashstartu.op_pmstashoff] \
461 # define PmopSTASH_set(o,hv) \
462 (assert_((o)->op_pmflags & PMf_ONCE) \
463 (o)->op_pmstashstartu.op_pmstashoff = \
464 (hv) ? alloccopstash(hv) : 0)
466 # define PmopSTASH(o) \
467 (((o)->op_pmflags & PMf_ONCE) ? (o)->op_pmstashstartu.op_pmstash : NULL)
468 # if defined (DEBUGGING) && defined(__GNUC__) && !defined(PERL_GCC_BRACE_GROUPS_FORBIDDEN)
469 # define PmopSTASH_set(o,hv) ({ \
470 assert((o)->op_pmflags & PMf_ONCE); \
471 ((o)->op_pmstashstartu.op_pmstash = (hv)); \
474 # define PmopSTASH_set(o,hv) ((o)->op_pmstashstartu.op_pmstash = (hv))
477 #define PmopSTASHPV(o) (PmopSTASH(o) ? HvNAME_get(PmopSTASH(o)) : NULL)
478 /* op_pmstashstartu.op_pmstash is not refcounted */
479 #define PmopSTASHPV_set(o,pv) PmopSTASH_set((o), gv_stashpv(pv,GV_ADD))
505 #define cUNOPx(o) ((UNOP*)o)
506 #define cBINOPx(o) ((BINOP*)o)
507 #define cLISTOPx(o) ((LISTOP*)o)
508 #define cLOGOPx(o) ((LOGOP*)o)
509 #define cPMOPx(o) ((PMOP*)o)
510 #define cSVOPx(o) ((SVOP*)o)
511 #define cPADOPx(o) ((PADOP*)o)
512 #define cPVOPx(o) ((PVOP*)o)
513 #define cCOPx(o) ((COP*)o)
514 #define cLOOPx(o) ((LOOP*)o)
516 #define cUNOP cUNOPx(PL_op)
517 #define cBINOP cBINOPx(PL_op)
518 #define cLISTOP cLISTOPx(PL_op)
519 #define cLOGOP cLOGOPx(PL_op)
520 #define cPMOP cPMOPx(PL_op)
521 #define cSVOP cSVOPx(PL_op)
522 #define cPADOP cPADOPx(PL_op)
523 #define cPVOP cPVOPx(PL_op)
524 #define cCOP cCOPx(PL_op)
525 #define cLOOP cLOOPx(PL_op)
527 #define cUNOPo cUNOPx(o)
528 #define cBINOPo cBINOPx(o)
529 #define cLISTOPo cLISTOPx(o)
530 #define cLOGOPo cLOGOPx(o)
531 #define cPMOPo cPMOPx(o)
532 #define cSVOPo cSVOPx(o)
533 #define cPADOPo cPADOPx(o)
534 #define cPVOPo cPVOPx(o)
535 #define cCOPo cCOPx(o)
536 #define cLOOPo cLOOPx(o)
538 #define kUNOP cUNOPx(kid)
539 #define kBINOP cBINOPx(kid)
540 #define kLISTOP cLISTOPx(kid)
541 #define kLOGOP cLOGOPx(kid)
542 #define kPMOP cPMOPx(kid)
543 #define kSVOP cSVOPx(kid)
544 #define kPADOP cPADOPx(kid)
545 #define kPVOP cPVOPx(kid)
546 #define kCOP cCOPx(kid)
547 #define kLOOP cLOOPx(kid)
551 # define cGVOPx_gv(o) ((GV*)PAD_SVl(cPADOPx(o)->op_padix))
552 # define IS_PADGV(v) (v && SvTYPE(v) == SVt_PVGV && isGV_with_GP(v) \
554 # define IS_PADCONST(v) \
555 (v && (SvREADONLY(v) || (SvIsCOW(v) && !SvLEN(v))))
556 # define cSVOPx_sv(v) (cSVOPx(v)->op_sv \
557 ? cSVOPx(v)->op_sv : PAD_SVl((v)->op_targ))
558 # define cSVOPx_svp(v) (cSVOPx(v)->op_sv \
559 ? &cSVOPx(v)->op_sv : &PAD_SVl((v)->op_targ))
561 # define cGVOPx_gv(o) ((GV*)cSVOPx(o)->op_sv)
562 # define IS_PADGV(v) FALSE
563 # define IS_PADCONST(v) FALSE
564 # define cSVOPx_sv(v) (cSVOPx(v)->op_sv)
565 # define cSVOPx_svp(v) (&cSVOPx(v)->op_sv)
568 #define cGVOP_gv cGVOPx_gv(PL_op)
569 #define cGVOPo_gv cGVOPx_gv(o)
570 #define kGVOP_gv cGVOPx_gv(kid)
571 #define cSVOP_sv cSVOPx_sv(PL_op)
572 #define cSVOPo_sv cSVOPx_sv(o)
573 #define kSVOP_sv cSVOPx_sv(kid)
576 # define Nullop ((OP*)NULL)
579 /* Lowest byte of PL_opargs */
581 #define OA_FOLDCONST 2
582 #define OA_RETSCALAR 4
584 #define OA_TARGLEX 16
585 #define OA_OTHERINT 32
586 #define OA_DANGEROUS 64
589 /* The next 4 bits encode op class information */
592 #define OA_CLASS_MASK (15 << OCSHIFT)
594 #define OA_BASEOP (0 << OCSHIFT)
595 #define OA_UNOP (1 << OCSHIFT)
596 #define OA_BINOP (2 << OCSHIFT)
597 #define OA_LOGOP (3 << OCSHIFT)
598 #define OA_LISTOP (4 << OCSHIFT)
599 #define OA_PMOP (5 << OCSHIFT)
600 #define OA_SVOP (6 << OCSHIFT)
601 #define OA_PADOP (7 << OCSHIFT)
602 #define OA_PVOP_OR_SVOP (8 << OCSHIFT)
603 #define OA_LOOP (9 << OCSHIFT)
604 #define OA_COP (10 << OCSHIFT)
605 #define OA_BASEOP_OR_UNOP (11 << OCSHIFT)
606 #define OA_FILESTATOP (12 << OCSHIFT)
607 #define OA_LOOPEXOP (13 << OCSHIFT)
611 /* Remaining nybbles of PL_opargs */
618 #define OA_SCALARREF 7
619 #define OA_OPTIONAL 8
621 /* Op_REFCNT is a reference count at the head of each op tree: needed
622 * since the tree is shared between threads, and between cloned closure
623 * copies in the same thread. OP_REFCNT_LOCK/UNLOCK is used when modifying
625 * The same mutex is used to protect the refcounts of the reg_trie_data
626 * and reg_ac_data structures, which are shared between duplicated
631 # define OP_REFCNT_INIT MUTEX_INIT(&PL_op_mutex)
633 # define OP_REFCNT_LOCK MUTEX_LOCK(&PL_op_mutex)
634 # define OP_REFCNT_UNLOCK MUTEX_UNLOCK(&PL_op_mutex)
636 # define OP_REFCNT_LOCK op_refcnt_lock()
637 # define OP_REFCNT_UNLOCK op_refcnt_unlock()
639 # define OP_REFCNT_TERM MUTEX_DESTROY(&PL_op_mutex)
641 # define OP_REFCNT_INIT NOOP
642 # define OP_REFCNT_LOCK NOOP
643 # define OP_REFCNT_UNLOCK NOOP
644 # define OP_REFCNT_TERM NOOP
647 #define OpREFCNT_set(o,n) ((o)->op_targ = (n))
648 #ifdef PERL_DEBUG_READONLY_OPS
649 # define OpREFCNT_inc(o) Perl_op_refcnt_inc(aTHX_ o)
650 # define OpREFCNT_dec(o) Perl_op_refcnt_dec(aTHX_ o)
652 # define OpREFCNT_inc(o) ((o) ? (++(o)->op_targ, (o)) : NULL)
653 # define OpREFCNT_dec(o) (--(o)->op_targ)
656 /* flags used by Perl_load_module() */
657 #define PERL_LOADMOD_DENY 0x1 /* no Module */
658 #define PERL_LOADMOD_NOIMPORT 0x2 /* use Module () */
659 #define PERL_LOADMOD_IMPORT_OPS 0x4 /* use Module (...) */
661 #if defined(PERL_IN_PERLY_C) || defined(PERL_IN_OP_C)
662 #define ref(o, type) doref(o, type, TRUE)
666 =head1 Optree Manipulation Functions
668 =for apidoc Am|OP*|LINKLIST|OP *o
669 Given the root of an optree, link the tree in execution order using the
670 C<op_next> pointers and return the first op executed. If this has
671 already been done, it will not be redone, and C<< o->op_next >> will be
672 returned. If C<< o->op_next >> is not already set, I<o> should be at
678 #define LINKLIST(o) ((o)->op_next ? (o)->op_next : op_linklist((OP*)o))
680 /* no longer used anywhere in core */
682 #define cv_ckproto(cv, gv, p) \
683 cv_ckproto_len_flags((cv), (gv), (p), (p) ? strlen(p) : 0, 0)
687 # define my(o) my_attrs((o), NULL)
690 #ifdef USE_REENTRANT_API
694 #define NewOp(m,var,c,type) \
695 (var = (type *) Perl_Slab_Alloc(aTHX_ c*sizeof(type)))
696 #define NewOpSz(m,var,size) \
697 (var = (OP *) Perl_Slab_Alloc(aTHX_ size))
698 #define FreeOp(p) Perl_Slab_Free(aTHX_ p)
701 * The per-CV op slabs consist of a header (the opslab struct) and a bunch
702 * of space for allocating op slots, each of which consists of two pointers
703 * followed by an op. The first pointer points to the next op slot. The
704 * second points to the slab. At the end of the slab is a null pointer,
705 * so that slot->opslot_next - slot can be used to determine the size
708 * Each CV can have multiple slabs; opslab_next points to the next slab, to
709 * form a chain. All bookkeeping is done on the first slab, which is where
710 * all the op slots point.
712 * Freed ops are marked as freed and attached to the freed chain
713 * via op_next pointers.
715 * When there is more than one slab, the second slab in the slab chain is
716 * assumed to be the one with free space available. It is used when allo-
717 * cating an op if there are no freed ops available or big enough.
722 /* keep opslot_next first */
723 OPSLOT * opslot_next; /* next slot */
724 OPSLAB * opslot_slab; /* owner */
725 OP opslot_op; /* the op itself */
729 OPSLOT * opslab_first; /* first op in this slab */
730 OPSLAB * opslab_next; /* next slab */
731 OP * opslab_freed; /* chain of freed ops */
732 size_t opslab_refcnt; /* number of ops */
733 # ifdef PERL_DEBUG_READONLY_OPS
734 U16 opslab_size; /* size of slab in pointers */
735 bool opslab_readonly;
737 OPSLOT opslab_slots; /* slots begin here */
740 # define OPSLOT_HEADER STRUCT_OFFSET(OPSLOT, opslot_op)
741 # define OPSLOT_HEADER_P (OPSLOT_HEADER/sizeof(I32 *))
742 # define OpSLOT(o) (assert_(o->op_slabbed) \
743 (OPSLOT *)(((char *)o)-OPSLOT_HEADER))
744 # define OpSLAB(o) OpSLOT(o)->opslot_slab
745 # define OpslabREFCNT_dec(slab) \
746 (((slab)->opslab_refcnt == 1) \
747 ? opslab_free_nopad(slab) \
748 : (void)--(slab)->opslab_refcnt)
749 /* Variant that does not null out the pads */
750 # define OpslabREFCNT_dec_padok(slab) \
751 (((slab)->opslab_refcnt == 1) \
752 ? opslab_free(slab) \
753 : (void)--(slab)->opslab_refcnt)
758 void (*bhk_start) (pTHX_ int full);
759 void (*bhk_pre_end) (pTHX_ OP **seq);
760 void (*bhk_post_end) (pTHX_ OP **seq);
761 void (*bhk_eval) (pTHX_ OP *const saveop);
765 =head1 Compile-time scope hooks
767 =for apidoc mx|U32|BhkFLAGS|BHK *hk
768 Return the BHK's flags.
770 =for apidoc mx|void *|BhkENTRY|BHK *hk|which
771 Return an entry from the BHK structure. I<which> is a preprocessor token
772 indicating which entry to return. If the appropriate flag is not set
773 this will return NULL. The type of the return value depends on which
776 =for apidoc Amx|void|BhkENTRY_set|BHK *hk|which|void *ptr
777 Set an entry in the BHK structure, and set the flags to indicate it is
778 valid. I<which> is a preprocessing token indicating which entry to set.
779 The type of I<ptr> depends on the entry.
781 =for apidoc Amx|void|BhkDISABLE|BHK *hk|which
782 Temporarily disable an entry in this BHK structure, by clearing the
783 appropriate flag. I<which> is a preprocessor token indicating which
786 =for apidoc Amx|void|BhkENABLE|BHK *hk|which
787 Re-enable an entry in this BHK structure, by setting the appropriate
788 flag. I<which> is a preprocessor token indicating which entry to enable.
789 This will assert (under -DDEBUGGING) if the entry doesn't contain a valid
792 =for apidoc mx|void|CALL_BLOCK_HOOKS|which|arg
793 Call all the registered block hooks for type I<which>. I<which> is a
794 preprocessing token; the type of I<arg> depends on I<which>.
799 #define BhkFLAGS(hk) ((hk)->bhk_flags)
801 #define BHKf_bhk_start 0x01
802 #define BHKf_bhk_pre_end 0x02
803 #define BHKf_bhk_post_end 0x04
804 #define BHKf_bhk_eval 0x08
806 #define BhkENTRY(hk, which) \
807 ((BhkFLAGS(hk) & BHKf_ ## which) ? ((hk)->which) : NULL)
809 #define BhkENABLE(hk, which) \
811 BhkFLAGS(hk) |= BHKf_ ## which; \
812 assert(BhkENTRY(hk, which)); \
815 #define BhkDISABLE(hk, which) \
817 BhkFLAGS(hk) &= ~(BHKf_ ## which); \
820 #define BhkENTRY_set(hk, which, ptr) \
823 BhkENABLE(hk, which); \
826 #define CALL_BLOCK_HOOKS(which, arg) \
828 if (PL_blockhooks) { \
830 for (i = av_len(PL_blockhooks); i >= 0; i--) { \
831 SV *sv = AvARRAY(PL_blockhooks)[i]; \
836 hk = INT2PTR(BHK *, SvUVX(sv)); \
838 hk = INT2PTR(BHK *, SvIVX(sv)); \
840 if (BhkENTRY(hk, which)) \
841 BhkENTRY(hk, which)(aTHX_ arg); \
846 /* flags for rv2cv_op_cv */
848 #define RV2CVOPCV_MARK_EARLY 0x00000001
849 #define RV2CVOPCV_RETURN_NAME_GV 0x00000002
851 #define op_lvalue(op,t) Perl_op_lvalue_flags(aTHX_ op,t,0)
853 /* flags for op_lvalue_flags */
855 #define OP_LVALUE_NO_CROAK 1
858 =head1 Custom Operators
860 =for apidoc Am|U32|XopFLAGS|XOP *xop
861 Return the XOP's flags.
863 =for apidoc Am||XopENTRY|XOP *xop|which
864 Return a member of the XOP structure. I<which> is a cpp token indicating
865 which entry to return. If the member is not set this will return a
866 default value. The return type depends on I<which>.
868 =for apidoc Am|void|XopENTRY_set|XOP *xop|which|value
869 Set a member of the XOP structure. I<which> is a cpp token indicating
870 which entry to set. See L<perlguts/"Custom Operators"> for details about
871 the available members and how they are used.
873 =for apidoc Am|void|XopDISABLE|XOP *xop|which
874 Temporarily disable a member of the XOP, by clearing the appropriate flag.
876 =for apidoc Am|void|XopENABLE|XOP *xop|which
877 Reenable a member of the XOP which has been disabled.
884 const char *xop_name;
885 const char *xop_desc;
887 void (*xop_peep)(pTHX_ OP *o, OP *oldop);
890 #define XopFLAGS(xop) ((xop)->xop_flags)
892 #define XOPf_xop_name 0x01
893 #define XOPf_xop_desc 0x02
894 #define XOPf_xop_class 0x04
895 #define XOPf_xop_peep 0x08
897 #define XOPd_xop_name PL_op_name[OP_CUSTOM]
898 #define XOPd_xop_desc PL_op_desc[OP_CUSTOM]
899 #define XOPd_xop_class OA_BASEOP
900 #define XOPd_xop_peep ((Perl_cpeep_t)0)
902 #define XopENTRY_set(xop, which, to) \
904 (xop)->which = (to); \
905 (xop)->xop_flags |= XOPf_ ## which; \
908 #define XopENTRY(xop, which) \
909 ((XopFLAGS(xop) & XOPf_ ## which) ? (xop)->which : XOPd_ ## which)
911 #define XopDISABLE(xop, which) ((xop)->xop_flags &= ~XOPf_ ## which)
912 #define XopENABLE(xop, which) \
914 (xop)->xop_flags |= XOPf_ ## which; \
915 assert(XopENTRY(xop, which)); \
919 =head1 Optree Manipulation Functions
921 =for apidoc Am|const char *|OP_NAME|OP *o
922 Return the name of the provided OP. For core ops this looks up the name
923 from the op_type; for custom ops from the op_ppaddr.
925 =for apidoc Am|const char *|OP_DESC|OP *o
926 Return a short description of the provided OP.
928 =for apidoc Am|U32|OP_CLASS|OP *o
929 Return the class of the provided OP: that is, which of the *OP
930 structures it uses. For core ops this currently gets the information out
931 of PL_opargs, which does not always accurately reflect the type used.
932 For custom ops the type is returned from the registration, and it is up
933 to the registree to ensure it is accurate. The value returned will be
934 one of the OA_* constants from op.h.
939 #define OP_NAME(o) ((o)->op_type == OP_CUSTOM \
940 ? XopENTRY(Perl_custom_op_xop(aTHX_ o), xop_name) \
941 : PL_op_name[(o)->op_type])
942 #define OP_DESC(o) ((o)->op_type == OP_CUSTOM \
943 ? XopENTRY(Perl_custom_op_xop(aTHX_ o), xop_desc) \
944 : PL_op_desc[(o)->op_type])
945 #define OP_CLASS(o) ((o)->op_type == OP_CUSTOM \
946 ? XopENTRY(Perl_custom_op_xop(aTHX_ o), xop_class) \
947 : (PL_opargs[(o)->op_type] & OA_CLASS_MASK))
949 #define newSUB(f, o, p, b) Perl_newATTRSUB(aTHX_ (f), (o), (p), NULL, (b))
961 /* short mad_count; */
974 * Values that can be held by mad_key :
975 * ^ unfilled head spot
977 * ; literal ; (blank if implicit ; at end of block)
978 * : literal : from ?: or attr list
980 * ? literal ? from ?:
990 * ! use is source filtered
992 * # whitespace/comment following ; or }
994 * 1 1st ; from for(;;)
996 * 2 2nd ; from for(;;)
999 * a sub or var attributes
1000 * a non-method arrow operator
1001 * A method arrow operator
1004 * B retired stub block
1005 * C constant conditional op
1008 * e unreached "else" (see C)
1009 * e expression producing E
1011 * f folded constant op
1012 * F peg op for format
1013 * g op was forced to be a word
1014 * i if/unless modifier
1015 * I if/elsif/unless statement
1016 * k local declarator
1018 * l last index of array ($#foo)
1020 * m modifier on regex
1021 * n sub or format name
1022 * o current operator/declarator name
1024 * O generic optimized op
1025 * p peg to hold extra whitespace at statement level
1026 * P peg op for package declaration
1031 * r expression producing R
1034 * S use import stub (no import)
1035 * S retired sort block
1036 * t unreached "then" (see C)
1038 * v private sv of for loop
1040 * w while/until modifier
1041 * W while/for statement
1044 * _ whitespace/comments preceding anything else
1049 =head1 Hook manipulation
1053 # define OP_CHECK_MUTEX_INIT MUTEX_INIT(&PL_check_mutex)
1054 # define OP_CHECK_MUTEX_LOCK MUTEX_LOCK(&PL_check_mutex)
1055 # define OP_CHECK_MUTEX_UNLOCK MUTEX_UNLOCK(&PL_check_mutex)
1056 # define OP_CHECK_MUTEX_TERM MUTEX_DESTROY(&PL_check_mutex)
1058 # define OP_CHECK_MUTEX_INIT NOOP
1059 # define OP_CHECK_MUTEX_LOCK NOOP
1060 # define OP_CHECK_MUTEX_UNLOCK NOOP
1061 # define OP_CHECK_MUTEX_TERM NOOP
1066 * c-indentation-style: bsd
1068 * indent-tabs-mode: nil
1071 * ex: set ts=8 sts=4 sw=4 et: