[perl #27638] scope exit could expose freed local() value

[perl5.git] / win32 / makefile.mk

#
# Makefile to build perl on Windows NT using DMAKE.
# Supported compilers:
#	Visual C++ 2.0 through 6.0 (and possibly newer versions)
#	Borland C++ 5.02
#	Mingw32 with gcc-2.95.2 or better  **experimental**
#	MS Platform SDK 64-bit compiler and tools **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
# (perl59.dll).  Also makes individual DLLs for the XS extensions.
#

##
## Make sure you read README.win32 *before* you mess with anything here!
##

##
## Build configuration.  Edit the values below to suit your needs.
##

#
# Set these to wherever you want "dmake install" to put your
# newly built perl.
#
INST_DRV	*= c:
INST_TOP	*= $(INST_DRV)\perl

#
# Comment this out if you DON'T want your perl installation to be versioned.
# This means that the new installation will overwrite any files from the
# old installation at the same INST_TOP location.  Leaving it enabled is
# the safest route, as perl adds the extra version directory to all the
# locations it installs files to.  If you disable it, an alternative
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
INST_VER	*= \5.9.1

#
# Comment this out if you DON'T want your perl installation to have
# architecture specific components.  This means that architecture-
# specific files will be installed along with the architecture-neutral
# files.  Leaving it enabled is safer and more flexible, in case you
# want to build multiple flavors of perl and install them together in
# the same location.  Commenting it out gives you a simpler
# installation that is easier to understand for beginners.
#
INST_ARCH	*= \$(ARCHNAME)

#
# uncomment to enable multiple interpreters.  This is need for fork()
# emulation and for thread support.
#
USE_MULTI	*= define

#
# Interpreter cloning/threads; now reasonably complete.
# This should be enabled to get the fork() emulation.  
# This needs USE_MULTI above.
#
USE_ITHREADS	*= define

#
# uncomment to enable the implicit "host" layer for all system calls
# made by perl.  This needs USE_MULTI above.  
# This is also needed to get fork().
#
USE_IMP_SYS	*= define

#
# Comment out next assign to disable perl's I/O subsystem and use compiler's 
# stdio for IO - depending on your compiler vendor and run time library you may 
# then get a number of fails from make test i.e. bugs - complain to them not us ;-). 
# You will also be unable to take full advantage of perl5.8's support for multiple 
# encodings and may see lower IO performance. You have been warned.
USE_PERLIO	*= define

#
# Comment this out if you don't want to enable large file support for
# some reason.  Should normally only be changed to maintain compatibility
# with an older release of perl.
USE_LARGE_FILES *= define

#
# uncomment exactly one of the following
#
# Visual C++ 2.x
#CCTYPE		*= MSVC20
# Visual C++ > 2.x and < 6.x
#CCTYPE		*= MSVC
# Visual C++ >= 6.x
CCTYPE		*= MSVC60
# Borland 5.02 or later
#CCTYPE		*= BORLAND
# mingw32+gcc-2.95.2 or better
#CCTYPE		*= GCC
# Uncomment this if you are using the latest MinGW release (2.0.0)
# with gcc3.2
#USE_GCC_V3_2	*= define

#
# uncomment this if your Borland compiler is older than v5.4.
#BCCOLD = define
#
# uncomment this if you want to use Borland's VCL as your CRT
#BCCVCL = define

#
# uncomment this if you are compiling under Windows 95/98 and command.com
# (not needed if you're running under 4DOS/NT 6.01 or later)
#IS_WIN95	*= define

#
# uncomment next line if you want debug version of perl (big,slow)
# If not enabled, we automatically try to use maximum optimization
# with all compilers that are known to have a working optimizer.
#
#CFG		*= Debug

#
# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
# It has patches that fix known bugs in older versions of MSVCRT.DLL.
# This currently requires VC 5.0 with Service Pack 3 or later.
# Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
# and follow the directions in the package to install.
#
# Not recommended if you have VC 6.x and you're not running Windows 9x.
#
#USE_PERLCRT	*= define

#
# uncomment to enable linking with setargv.obj under the Visual C
# compiler. Setting this options enables perl to expand wildcards in
# arguments, but it may be harder to use alternate methods like
# File::DosGlob that are more powerful.  This option is supported only with
# Visual C.
#
#USE_SETARGV	*= define

#
# if you want to have the crypt() builtin function implemented, leave this or
# CRYPT_LIB uncommented.  The fcrypt.c file named here contains a suitable
# version of des_fcrypt().
#
CRYPT_SRC	*= fcrypt.c

#
# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
# library, uncomment this, and make sure the library exists (see README.win32)
# Specify the full pathname of the library.
#
#CRYPT_LIB	*= fcrypt.lib

#
# set this if you wish to use perl's malloc
# WARNING: Turning this on/off WILL break binary compatibility with extensions
# you may have compiled with/without it.  Be prepared to recompile all
# extensions if you change the default.  Currently, this cannot be enabled
# if you ask for USE_IMP_SYS above.
#
#PERL_MALLOC	*= define

#
# set the install locations of the compiler include/libraries
# Running VCVARS32.BAT is *required* when using Visual C.
# Some versions of Visual C don't define MSVCDIR in the environment,
# so you may have to set CCHOME explicitly (spaces in the path name should
# not be quoted)
#
.IF "$(CCTYPE)" == "BORLAND"
CCHOME		*= C:\borland\bcc55
.ELIF "$(CCTYPE)" == "GCC"
CCHOME		*= C:\MinGW
.ELSE
CCHOME		*= $(MSVCDIR)
.ENDIF
CCINCDIR	*= $(CCHOME)\include
CCLIBDIR	*= $(CCHOME)\lib

#
# Additional compiler flags can be specified here.
#

#
# This should normally be disabled.  Adding -DPERL_POLLUTE enables support
# for old symbols by default, at the expense of extreme pollution.  You most
# probably just want to build modules that won't compile with
#         perl Makefile.PL POLLUTE=1
# instead of enabling this.  Please report such modules to the respective
# authors.
#
#BUILDOPT	+= -DPERL_POLLUTE

#
# This should normally be disabled.  Enabling it will disable the File::Glob
# implementation of CORE::glob.
#
#BUILDOPT	+= -DPERL_EXTERNAL_GLOB

#
# This should normally be disabled.  Enabling it causes perl to read scripts
# in text mode (which is the 5.005 behavior) and will break ByteLoader.
#BUILDOPT	+= -DPERL_TEXTMODE_SCRIPTS

#
# specify semicolon-separated list of extra directories that modules will
# look for libraries (spaces in path names need not be quoted)
#
EXTRALIBDIRS	*=

#
# set this to point to cmd.exe (only needed if you use some
# alternate shell that doesn't grok cmd.exe style commands)
#
#SHELL		*= g:\winnt\system32\cmd.exe

#
# set this to your email address (perl will guess a value from
# from your loginname and your hostname, which may not be right)
#
#EMAIL		*=

##
## Build configuration ends.
##

##################### CHANGE THESE ONLY IF YOU MUST #####################

.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
D_CRYPT		= undef
.ELSE
D_CRYPT		= define
CRYPT_FLAG	= -DHAVE_DES_FCRYPT
.ENDIF

PERL_MALLOC	*= undef

USE_MULTI	*= undef
USE_ITHREADS	*= undef
USE_IMP_SYS	*= undef
USE_PERLIO	*= undef
USE_LARGE_FILES	*= undef
USE_PERLCRT	*= undef

.IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
USE_MULTI	!= define
.ENDIF

.IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
USE_MULTI	!= define
.ENDIF

.IF "$(USE_MULTI)" != "undef"
BUILDOPT	+= -DPERL_IMPLICIT_CONTEXT
.ENDIF

.IF "$(USE_IMP_SYS)" != "undef"
BUILDOPT	+= -DPERL_IMPLICIT_SYS
.ENDIF

.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432

PROCESSOR_ARCHITECTURE *= x86

.IF "$(WIN64)" == ""
.IF "$(PROCESSOR_ARCHITEW6432)" != ""
PROCESSOR_ARCHITECTURE	!= $(PROCESSOR_ARCHITEW6432)
WIN64			= define
.ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
WIN64			= define
.ELSE
WIN64			= undef
.ENDIF
.ENDIF

.IF "$(USE_MULTI)" == "define"
ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
.ELSE
.IF "$(USE_PERLIO)" == "define"
ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
.ELSE
ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)
.ENDIF
ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)
.ENDIF

.IF "$(USE_ITHREADS)" == "define"
ARCHNAME	!:= $(ARCHNAME)-thread
.ENDIF

# Visual Studio 98 specific
.IF "$(CCTYPE)" == "MSVC60"

# VC 6.0 can load the socket dll on demand.  Makes the test suite
# run in about 10% less time.
DELAYLOAD	*= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib

.IF "$(CFG)" == "Debug"
.ELSE
# VC 6.0 seems capable of compiling perl correctly with optimizations
# enabled.  Anything earlier fails tests.
CFG		*= Optimize
.ENDIF
.ENDIF

ARCHDIR		= ..\lib\$(ARCHNAME)
COREDIR		= ..\lib\CORE
AUTODIR		= ..\lib\auto
LIBDIR		= ..\lib
EXTDIR		= ..\ext
PODDIR		= ..\pod
EXTUTILSDIR	= $(LIBDIR)\ExtUtils

#
INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin
INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)
INST_LIB	= $(INST_TOP)$(INST_VER)\lib
INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)
INST_COREDIR	= $(INST_ARCHLIB)\CORE
INST_POD	= $(INST_LIB)\pod
INST_HTML	= $(INST_TOP)$(INST_VER)\html

#
# Programs to compile, build .lib files and link
#

.USESHELL :

.IF "$(CCTYPE)" == "BORLAND"

CC		= bcc32
.IF "$(BCCOLD)" != "define"
LINK32		= ilink32
.ELSE
LINK32		= tlink32
.ENDIF
LIB32		= tlib /P128
IMPLIB		= implib -c
RSC		= rc

#
# Options
#
INCLUDES	= -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
#PCHFLAGS	= -H -Hc -H=c:\temp\bcmoduls.pch
DEFINES		= -DWIN32 $(CRYPT_FLAG)
LOCDEFS		= -DPERLDLL -DPERL_CORE
SUBSYS		= console
CXX_FLAG	= -P

LIBC		= cw32mti.lib
LIBFILES	= $(CRYPT_LIB) import32.lib $(LIBC)

.IF  "$(CFG)" == "Debug"
OPTIMIZE	= -v -D_RTLDLL -DDEBUGGING
LINK_DBG	= -v
.ELSE
OPTIMIZE	= -O2 -D_RTLDLL
LINK_DBG	=
.ENDIF

CFLAGS		= -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
		$(PCHFLAGS) $(OPTIMIZE)
LINK_FLAGS	= $(LINK_DBG) -L"$(INST_COREDIR)"  -L"$(CCLIBDIR)"
OBJOUT_FLAG	= -o
EXEOUT_FLAG	= -e
LIBOUT_FLAG	=
.IF "$(BCCOLD)" != "define"
LINK_FLAGS	+= -Gn
DEFINES  += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
.END
.IF "$(BCCVCL)" == "define"
LIBC		= cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
LINK_FLAGS	+= -L"$(CCLIBDIR)\Release"
.END


.ELIF "$(CCTYPE)" == "GCC"

CC		= gcc
LINK32		= g++
.IF "$(USE_GCC_V3_2)" == "define"
LINK32		= g++
.END
LIB32		= ar rc
IMPLIB		= dlltool
RSC		= windres

i = .i
o = .o
a = .a

#
# Options
#

INCLUDES	= -I.\include -I. -I.. -I$(COREDIR)
DEFINES		= -DWIN32 $(CRYPT_FLAG)
LOCDEFS		= -DPERLDLL -DPERL_CORE
SUBSYS		= console
CXX_FLAG	= -xc++

LIBC		= -lmsvcrt

# same libs as MSVC
LIBFILES	= $(CRYPT_LIB) $(LIBC) \
		  -lmoldname -lkernel32 -luser32 -lgdi32 \
		  -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
		  -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
		  -lwinmm -lversion -lodbc32

.IF  "$(CFG)" == "Debug"
OPTIMIZE	= -g -O2 -DDEBUGGING
LINK_DBG	= -g
.ELSE
OPTIMIZE	= -g -O2
LINK_DBG	= -g
.ENDIF

CFLAGS		= $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
LINK_FLAGS	= $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
OBJOUT_FLAG	= -o
EXEOUT_FLAG	= -o
LIBOUT_FLAG	=

# NOTE: we assume that GCC uses MSVCRT.DLL
BUILDOPT	+= -fno-strict-aliasing -DPERL_MSVCRT_READFIX

.ELSE

CC		= cl
LINK32		= link
LIB32		= $(LINK32) -lib
RSC		= rc

#
# Options
#

INCLUDES	= -I$(COREDIR) -I.\include -I. -I..
#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX
DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
LOCDEFS		= -DPERLDLL -DPERL_CORE
SUBSYS		= console
CXX_FLAG	= -TP -GX

.IF "$(USE_PERLCRT)" != "define"
LIBC	= msvcrt.lib
.ELSE
LIBC	= PerlCRT.lib
.ENDIF

.IF  "$(CFG)" == "Debug"
.IF "$(CCTYPE)" == "MSVC20"
OPTIMIZE	= -Od -MD -Z7 -DDEBUGGING
.ELSE
OPTIMIZE	= -O1 -MD -Zi -DDEBUGGING
.ENDIF
LINK_DBG	= -debug
.ELSE
OPTIMIZE	= -MD -DNDEBUG
LINK_DBG	= -release
.IF "$(WIN64)" == "define"
# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
OPTIMIZE	+= -Ox -GL
LINK_DBG	+= -ltcg
.ELSE
# -O1 yields smaller code, which turns out to be faster than -O2 on x86
OPTIMIZE	+= -O1
#OPTIMIZE	+= -O2
.ENDIF
.ENDIF

.IF "$(WIN64)" == "define"
DEFINES		+= -DWIN64 -DCONSERVATIVE
OPTIMIZE	+= -Wp64 -Op
.ENDIF

.IF "$(USE_PERLCRT)" != "define"
BUILDOPT	+= -DPERL_MSVCRT_READFIX
.ENDIF

LIBBASEFILES	= $(CRYPT_LIB) \
		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
		netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
		version.lib

# win64 doesn't have some libs
.IF "$(WIN64)" != "define"
LIBBASEFILES	+= odbc32.lib odbccp32.lib
.ENDIF

# we add LIBC here, since we may be using PerlCRT.dll
LIBFILES	= $(LIBBASEFILES) $(LIBC)

CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
		$(PCHFLAGS) $(OPTIMIZE)
LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \
		-libpath:"$(INST_COREDIR)" \
		-machine:$(PROCESSOR_ARCHITECTURE)
OBJOUT_FLAG	= -Fo
EXEOUT_FLAG	= -Fe
LIBOUT_FLAG	= /out:

.ENDIF

CFLAGS_O	= $(CFLAGS) $(BUILDOPT)

# used to allow local linking flags that are not propogated into Config.pm,
# currently unused
#   -- BKS, 12-12-1999
PRIV_LINK_FLAGS	*=
BLINK_FLAGS	= $(PRIV_LINK_FLAGS) $(LINK_FLAGS)

#################### do not edit below this line #######################
############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############

o *= .obj
a *= .lib

LKPRE		= INPUT (
LKPOST		= )

#
# Rules
#

.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res

.c$(o):
	$(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<

.c.i:
	$(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@

.y.c:
	$(NOOP)

$(o).dll:
.IF "$(CCTYPE)" == "BORLAND"
	$(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
	$(IMPLIB) $(*B).lib $@
.ELIF "$(CCTYPE)" == "GCC"
	$(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
	$(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
.ELSE
	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
	    -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
.ENDIF

.rc.res:
.IF "$(CCTYPE)" == "GCC"
	$(RSC) --use-temp-file -i $< -o $@
.ELSE
	$(RSC) -i.. $<
.ENDIF

#
# various targets
MINIPERL	= ..\miniperl.exe
MINIDIR		= .\mini
PERLEXE		= ..\perl.exe
WPERLEXE	= ..\wperl.exe
GLOBEXE		= ..\perlglob.exe
CONFIGPM	= ..\lib\Config.pm
MINIMOD		= ..\lib\ExtUtils\Miniperl.pm
X2P		= ..\x2p\a2p.exe

PERLEXE_ICO	= .\perlexe.ico
PERLEXE_RES	= .\perlexe.res
PERLDLL_RES	=

# Nominate a target which causes extensions to be re-built
# This used to be $(PERLEXE), but at worst it is the .dll that they depend
# on and really only the interface - i.e. the .def file used to export symbols
# from the .dll
PERLDEP = perldll.def


PL2BAT		= bin\pl2bat.pl
GLOBBAT		= bin\perlglob.bat

UTILS		=			\
		..\utils\h2ph		\
		..\utils\splain		\
		..\utils\dprofpp	\
		..\utils\perlbug	\
		..\utils\pl2pm 		\
		..\utils\c2ph		\
		..\utils\pstruct	\
		..\utils\h2xs		\
		..\utils\perldoc	\
		..\utils\perlcc		\
		..\utils\perlivp	\
		..\utils\libnetcfg	\
		..\utils\enc2xs		\
		..\utils\piconv		\
		..\utils\cpan		\
		..\utils\xsubpp		\
		..\utils\prove		\
		..\utils\instmodsh	\
		..\pod\checkpods	\
		..\pod\pod2html		\
		..\pod\pod2latex	\
		..\pod\pod2man		\
		..\pod\pod2text		\
		..\pod\pod2usage	\
		..\pod\podchecker	\
		..\pod\podselect	\
		..\x2p\find2perl	\
		..\x2p\psed		\
		..\x2p\s2p		\
		bin\exetype.pl		\
		bin\runperl.pl		\
		bin\pl2bat.pl		\
		bin\perlglob.pl		\
		bin\search.pl

.IF "$(CCTYPE)" == "BORLAND"

CFGSH_TMPL	= config.bc
CFGH_TMPL	= config_H.bc

.ELIF "$(CCTYPE)" == "GCC"

CFGSH_TMPL	= config.gc
CFGH_TMPL	= config_H.gc
PERLIMPLIB	= ..\libperl59$(a)

.ELSE

.IF "$(WIN64)" == "define"
CFGSH_TMPL	= config.vc64
CFGH_TMPL	= config_H.vc64
.ELSE
CFGSH_TMPL	= config.vc
CFGH_TMPL	= config_H.vc
.ENDIF

.ENDIF

# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
PERLIMPLIB	*= ..\perl59$(a)
PERLDLL		= ..\perl59.dll

XCOPY		= xcopy /f /r /i /d
RCOPY		= xcopy /f /r /i /e /d
NOOP		= @echo

#
# filenames given to xsubpp must have forward slashes (since it puts
# full pathnames in #line strings)
XSUBPP		= ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
		-C++ -prototypes

MICROCORE_SRC	=		\
		..\av.c		\
		..\deb.c	\
		..\doio.c	\
		..\doop.c	\
		..\dump.c	\
		..\globals.c	\
		..\gv.c		\
		..\hv.c		\
		..\locale.c	\
		..\mg.c		\
		..\numeric.c	\
		..\op.c		\
		..\pad.c	\
		..\perl.c	\
		..\perlapi.c	\
		..\perly.c	\
		..\pp.c		\
		..\pp_ctl.c	\
		..\pp_hot.c	\
		..\pp_pack.c	\
		..\pp_sort.c	\
		..\pp_sys.c	\
		..\reentr.c	\
		..\regcomp.c	\
		..\regexec.c	\
		..\run.c	\
		..\scope.c	\
		..\sv.c		\
		..\taint.c	\
		..\toke.c	\
		..\universal.c	\
		..\utf8.c	\
		..\util.c	\
		..\xsutils.c

EXTRACORE_SRC	+= perllib.c

.IF "$(PERL_MALLOC)" == "define"
EXTRACORE_SRC	+= ..\malloc.c
.ENDIF

EXTRACORE_SRC	+= ..\perlio.c

WIN32_SRC	=		\
		.\win32.c	\
		.\win32sck.c	\
		.\win32thread.c

# We need this for miniperl build unless we override canned 
# config.h #define building mini\*
#.IF "$(USE_PERLIO)" == "define"
WIN32_SRC	+= .\win32io.c
#.ENDIF

.IF "$(CRYPT_SRC)" != ""
WIN32_SRC	+= .\$(CRYPT_SRC)
.ENDIF

DLL_SRC		= $(DYNALOADER).c

X2P_SRC		=		\
		..\x2p\a2p.c	\
		..\x2p\hash.c	\
		..\x2p\str.c	\
		..\x2p\util.c	\
		..\x2p\walk.c

CORE_NOCFG_H	=		\
		..\av.h		\
		..\cop.h	\
		..\cv.h		\
		..\dosish.h	\
		..\embed.h	\
		..\form.h	\
		..\gv.h		\
		..\handy.h	\
		..\hv.h		\
		..\iperlsys.h	\
		..\mg.h		\
		..\nostdio.h	\
		..\op.h		\
		..\opcode.h	\
		..\perl.h	\
		..\perlapi.h	\
		..\perlsdio.h	\
		..\perlsfio.h	\
		..\perly.h	\
		..\pp.h		\
		..\proto.h	\
		..\regexp.h	\
		..\scope.h	\
		..\sv.h		\
		..\thread.h	\
		..\unixish.h	\
		..\utf8.h	\
		..\util.h	\
		..\warnings.h	\
		..\XSUB.h	\
		..\EXTERN.h	\
		..\perlvars.h	\
		..\intrpvar.h	\
		..\thrdvar.h	\
		.\include\dirent.h	\
		.\include\netdb.h	\
		.\include\sys\socket.h	\
		.\win32.h

CORE_H		= $(CORE_NOCFG_H) .\config.h

MICROCORE_OBJ	= $(MICROCORE_SRC:db:+$(o))
CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
WIN32_OBJ	= $(WIN32_SRC:db:+$(o))
MINICORE_OBJ	= $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
MINIWIN32_OBJ	= $(MINIDIR)\{$(WIN32_OBJ:f)}
MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)
DLL_OBJ		= $(DLL_SRC:db:+$(o))
X2P_OBJ		= $(X2P_SRC:db:+$(o))

PERLDLL_OBJ	= $(CORE_OBJ)
PERLEXE_OBJ	= perlmain$(o)

PERLDLL_OBJ	+= $(WIN32_OBJ) $(DLL_OBJ)

.IF "$(USE_SETARGV)" != ""
SETARGV_OBJ	= setargv$(o)
.ENDIF

DYNAMIC_EXT	= Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
		Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
		Sys/Hostname Storable Filter/Util/Call Encode \
		Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
		Unicode/Normalize
STATIC_EXT	= DynaLoader
NONXS_EXT	= Errno

DYNALOADER	= $(EXTDIR)\DynaLoader\DynaLoader

POD2HTML	= $(PODDIR)\pod2html
POD2MAN		= $(PODDIR)\pod2man
POD2LATEX	= $(PODDIR)\pod2latex
POD2TEXT	= $(PODDIR)\pod2text

# vars must be separated by "\t+~\t+", since we're using the tempfile
# version of config_sh.pl (we were overflowing someone's buffer by
# trying to fit them all on the command line)
#	-- BKS 10-17-1999
CFG_VARS	=					\
		INST_DRV=$(INST_DRV)		~	\
		INST_TOP=$(INST_TOP:s/\/\\/)	~	\
		INST_VER=$(INST_VER:s/\/\\/)	~	\
		INST_ARCH=$(INST_ARCH)		~	\
		archname=$(ARCHNAME)		~	\
		cc=$(CC)			~	\
		ld=$(LINK32)			~	\
		ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT)	~	\
		cf_email=$(EMAIL)		~	\
		d_crypt=$(D_CRYPT)		~	\
		d_mymalloc=$(PERL_MALLOC)	~	\
		libs=$(LIBFILES:f)		~	\
		incpath=$(CCINCDIR:s/\/\\/)	~	\
		libperl=$(PERLIMPLIB:f)		~	\
		libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/)	~	\
		libc=$(LIBC)			~	\
		make=dmake			~	\
		_o=$(o)				~	\
		obj_ext=$(o)			~	\
		_a=$(a)				~	\
		lib_ext=$(a)			~	\
		static_ext=$(STATIC_EXT)	~	\
		usethreads=$(USE_ITHREADS)	~	\
		useithreads=$(USE_ITHREADS)	~	\
		usemultiplicity=$(USE_MULTI)	~	\
		useperlio=$(USE_PERLIO)		~	\
		uselargefiles=$(USE_LARGE_FILES)	~	\
		LINK_FLAGS=$(LINK_FLAGS:s/\/\\/)	~	\
		optimize=$(OPTIMIZE)

#
# set up targets varying between Win95 and WinNT builds
#

.IF "$(IS_WIN95)" == "define"
MK2 		= .\makefile.95
RIGHTMAKE	= __switch_makefiles
NOOP		= @rem
.ELSE
MK2		= __not_needed
RIGHTMAKE	=
.ENDIF

#
# Top targets
#

all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2)		\
	$(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE)	\
	$(X2P) Extensions

$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c

#----------------------------------------------------------------

#-------------------- BEGIN Win95 SPECIFIC ----------------------

# this target is a jump-off point for Win95
#  1. it switches to the Win95-specific makefile if it exists
#     (__do_switch_makefiles)
#  2. it prints a message when the Win95-specific one finishes (__done)
#  3. it then kills this makefile by trying to make __no_such_target

__switch_makefiles: __do_switch_makefiles __done __no_such_target

__do_switch_makefiles:
.IF "$(NOTFIRST)" != "true"
	if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
.ELSE
	$(NOOP)
.ENDIF

.IF "$(NOTFIRST)" != "true"
__done:
	@echo Build process complete. Ignore any errors after this message.
	@echo Run "dmake test" to test and "dmake install" to install

.ELSE
# dummy targets for Win95-specific makefile

__done:
	$(NOOP)

__no_such_target:
	$(NOOP)

.ENDIF

# This target is used to generate the new makefile (.\makefile.95) for Win95

.\makefile.95: .\makefile.mk
	$(MINIPERL) genmk95.pl makefile.mk $(MK2)

#--------------------- END Win95 SPECIFIC ---------------------

# a blank target for when builds don't need to do certain things
# this target added for Win95 port but used to keep the WinNT port able to
# use this file
__not_needed:
	$(NOOP)

$(GLOBEXE) : perlglob$(o)
.IF "$(CCTYPE)" == "BORLAND"
	$(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
	$(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
	    "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
.ELIF "$(CCTYPE)" == "GCC"
	$(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
.ELSE
	$(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
	    perlglob$(o) setargv$(o)
.ENDIF

perlglob$(o)  : perlglob.c

config.w32 : $(CFGSH_TMPL)
	copy $(CFGSH_TMPL) config.w32

.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
	-del /f config.h
	copy $(CFGH_TMPL) config.h

..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
	$(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
	    $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh

# this target is for when changes to the main config.sh happen
# edit config.{b,v,g}c and make this target once for each supported
# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
regen_config_h:
	perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
	    $(CFGSH_TMPL) > ..\config.sh
	-cd .. && del /f perl.exe
	-cd .. && del /f perl*.dll
	cd .. && perl configpm
	-del /f $(CFGH_TMPL)
	-mkdir $(COREDIR)
	-perl config_h.PL "INST_VER=$(INST_VER)"
	rename config.h $(CFGH_TMPL)

$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
	cd .. && miniperl configpm
	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
	$(XCOPY) ..\*.h $(COREDIR)\*.*
	$(XCOPY) *.h $(COREDIR)\*.*
	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
	$(RCOPY) include $(COREDIR)\*.*
	$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
	    || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)

$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
.IF "$(CCTYPE)" == "BORLAND"
	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
	    @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
.ELIF "$(CCTYPE)" == "GCC"
	$(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
	    $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
.ELSE
	$(LINK32) -subsystem:console -out:$@ \
	    @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
.ENDIF

$(MINIDIR) :
	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"

$(MINICORE_OBJ) : $(CORE_NOCFG_H)
	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c

$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
	$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c

# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
# unless the .IF is true), so instead we use a .ELSE with the default.
# This is the only file that depends on perlhost.h, vmem.h, and vdir.h

perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h
.IF "$(USE_IMP_SYS)" == "define"
	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
.ELSE
	$(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
.ENDIF

# 1. we don't want to rebuild miniperl.exe when config.h changes
# 2. we don't want to rebuild miniperl.exe with non-default config.h
$(MINI_OBJ)	: $(CORE_NOCFG_H)

$(WIN32_OBJ)	: $(CORE_H)
$(CORE_OBJ)	: $(CORE_H)
$(DLL_OBJ)	: $(CORE_H)
$(X2P_OBJ)	: $(CORE_H)

perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
	$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
	$(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def

$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
.IF "$(CCTYPE)" == "BORLAND"
	$(LINK32) -Tpd -ap $(BLINK_FLAGS) \
	    @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
		$@,\n \
		$(LIBFILES)\n \
		perldll.def\n)
	$(IMPLIB) $*.lib $@
.ELIF "$(CCTYPE)" == "GCC"
	$(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
	    $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
	dlltool --output-lib $(PERLIMPLIB) \
		--dllname $(PERLDLL:b).dll \
		--def perldll.def \
		--base-file perl.base \
		--output-exp perl.exp
	$(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
	    $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
		perl.exp $(LKPOST))
.ELSE
	$(LINK32) -dll -def:perldll.def -out:$@ \
	    @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
	        $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
.ENDIF
	$(XCOPY) $(PERLIMPLIB) $(COREDIR)

$(PERLEXE_ICO): $(MINIPERL) makeico.pl
	$(MINIPERL) makeico.pl > $@

$(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)

$(MINIMOD) : $(MINIPERL) ..\minimod.pl
	cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm

..\x2p\a2p$(o) : ..\x2p\a2p.c
	$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c

..\x2p\hash$(o) : ..\x2p\hash.c
	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c

..\x2p\str$(o) : ..\x2p\str.c
	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c

..\x2p\util$(o) : ..\x2p\util.c
	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c

..\x2p\walk$(o) : ..\x2p\walk.c
	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c

$(X2P) : $(MINIPERL) $(X2P_OBJ)
	$(MINIPERL) ..\x2p\find2perl.PL
	$(MINIPERL) ..\x2p\s2p.PL
.IF "$(CCTYPE)" == "BORLAND"
	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
	    @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
.ELIF "$(CCTYPE)" == "GCC"
	$(LINK32) -v -o $@ $(BLINK_FLAGS) \
	    $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
.ELSE
	$(LINK32) -subsystem:console -out:$@ \
	    @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
.ENDIF

perlmain.c : runperl.c
	copy runperl.c perlmain.c

perlmain$(o) : perlmain.c
	$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c

$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
.IF "$(CCTYPE)" == "BORLAND"
	$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
	    @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
	    $(@:s,\,\\),\n \
	    $(PERLIMPLIB) $(LIBFILES)\n)
.ELIF "$(CCTYPE)" == "GCC"
	$(LINK32) -mconsole -o $@ $(BLINK_FLAGS)  \
	    $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
.ELSE
	$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
	    $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
.ENDIF
	copy $(PERLEXE) $(WPERLEXE)
	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
	copy splittree.pl ..
	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)

$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
	if not exist $(AUTODIR) mkdir $(AUTODIR)
	cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
	cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
	cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
	$(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .

$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs

#----------------------------------------------------------------------------------
Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
	$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)

Extensions_clean :
	-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean

Extensions_realclean :
	-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean

#----------------------------------------------------------------------------------


doc: $(PERLEXE)
	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
	    --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse

# Note that this next section is parsed (and regenerated) by pod/buildtoc
# so please check that script before making structural changes here
utils: $(PERLEXE) $(X2P)
	cd ..\utils && $(MAKE) PERL=$(MINIPERL)
	copy ..\vms\perlvms.pod	..\pod\perlvms.pod
	copy ..\README.aix      ..\pod\perlaix.pod
	copy ..\README.amiga    ..\pod\perlamiga.pod
	copy ..\README.apollo   ..\pod\perlapollo.pod
	copy ..\README.beos     ..\pod\perlbeos.pod
	copy ..\README.bs2000   ..\pod\perlbs2000.pod
	copy ..\README.ce       ..\pod\perlce.pod
	copy ..\README.cn       ..\pod\perlcn.pod
	copy ..\README.cygwin   ..\pod\perlcygwin.pod
	copy ..\README.dgux     ..\pod\perldgux.pod
	copy ..\README.dos      ..\pod\perldos.pod
	copy ..\README.epoc     ..\pod\perlepoc.pod
	copy ..\README.freebsd  ..\pod\perlfreebsd.pod
	copy ..\README.hpux     ..\pod\perlhpux.pod
	copy ..\README.hurd     ..\pod\perlhurd.pod
	copy ..\README.irix     ..\pod\perlirix.pod
	copy ..\README.jp       ..\pod\perljp.pod
	copy ..\README.ko       ..\pod\perlko.pod
	copy ..\README.machten  ..\pod\perlmachten.pod
	copy ..\README.macos    ..\pod\perlmacos.pod
	copy ..\README.macosx   ..\pod\perlmacosx.pod
	copy ..\README.mint     ..\pod\perlmint.pod
	copy ..\README.mpeix    ..\pod\perlmpeix.pod
	copy ..\README.netware  ..\pod\perlnetware.pod
	copy ..\README.os2      ..\pod\perlos2.pod
	copy ..\README.os390    ..\pod\perlos390.pod
	copy ..\README.os400    ..\pod\perlos400.pod
	copy ..\README.plan9    ..\pod\perlplan9.pod
	copy ..\README.qnx      ..\pod\perlqnx.pod
	copy ..\README.solaris  ..\pod\perlsolaris.pod
	copy ..\README.tru64    ..\pod\perltru64.pod
	copy ..\README.tw       ..\pod\perltw.pod
	copy ..\README.uts      ..\pod\perluts.pod
	copy ..\README.vmesa    ..\pod\perlvmesa.pod
	copy ..\README.vms      ..\pod\perlvms.pod
	copy ..\README.vos      ..\pod\perlvos.pod
	copy ..\README.win32    ..\pod\perlwin32.pod
	copy ..\pod\perl591delta.pod ..\pod\perldelta.pod
	cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
	cd ..\lib && $(PERLEXE) lib_pm.PL
	$(PERLEXE) $(PL2BAT) $(UTILS)

# Note that the pod cleanup in this next section is parsed (and regenerated
# by pod/buildtoc so please check that script before making changes here

distclean: realclean
	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
		$(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
	-del /f *.def *.map
	-del /f $(DYNALOADER).c
	-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
	-del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
	-del /f $(EXTDIR)\DynaLoader\XSLoader.pm
	-del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
	-del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
	-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
	-del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
	-del /f $(LIBDIR)\ByteLoader.pm
	-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
	-del /f $(LIBDIR)\Devel\PPPort.pm
	-del /f $(LIBDIR)\File\Glob.pm
	-del /f $(LIBDIR)\Storable.pm
	-del /f $(LIBDIR)\Digest\MD5.pm
	-del /f $(LIBDIR)\PerlIO\encoding.pm
	-del /f $(LIBDIR)\PerlIO\scalar.pm
	-del /f $(LIBDIR)\PerlIO\via.pm
	-del /f $(LIBDIR)\Sys\Hostname.pm
	-del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
	-del /f $(LIBDIR)\threads\shared.pm
	-del /f $(LIBDIR)\Time\HiRes.pm
	-del /f $(LIBDIR)\Unicode\Normalize.pm
	-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
	-if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
	-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
	-if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
	-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
	-if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
	-if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
	-if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
	-if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
	-if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
	-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
	-if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
	-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
	-if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
	-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
	-if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
	-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
	-if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
	-cd $(PODDIR) && del /f *.html *.bat checkpods \
	    perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
	    perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
	    perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
	    perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
	    perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
	    perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
	    perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
	    perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
	    perluts.pod perlvmesa.pod perlvms.pod perlvos.pod perlwin32.pod \
	    pod2html pod2latex pod2man pod2text pod2usage \
	    podchecker podselect
	-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
	    perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
	    xsubpp instmodsh prove
	-cd ..\x2p && del /f find2perl s2p psed *.bat
	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
	-del /f $(CONFIGPM)
	-del /f bin\*.bat
	-del /f $(PERLEXE_ICO)
	-cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
	-cd $(EXTDIR) && del /s *.def Makefile Makefile.old
	-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
	-if exist $(AUTODIR) rmdir /s $(AUTODIR)
	-if exist $(COREDIR) rmdir /s /q $(COREDIR)
	-if exist $(COREDIR) rmdir /s $(COREDIR)

install : all installbare installhtml

installbare : $(RIGHTMAKE) utils
	$(PERLEXE) ..\installperl
	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*

installhtml : doc
	$(RCOPY) html\*.* $(INST_HTML)\*.*

inst_lib : $(CONFIGPM)
	copy splittree.pl ..
	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
	$(RCOPY) ..\lib $(INST_LIB)\*.*

minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
	$(XCOPY) $(MINIPERL) ..\t\perl.exe
.IF "$(CCTYPE)" == "BORLAND"
	$(XCOPY) $(GLOBBAT) ..\t\$(NULL)
.ELSE
	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
.ENDIF
	attrib -r ..\t\*.*
	copy test ..\t
	cd ..\t && \
	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t

test-prep : all utils
	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
.IF "$(CCTYPE)" == "BORLAND"
	$(XCOPY) $(GLOBBAT) ..\t\$(NULL)
.ELSE
	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
.ENDIF

test : $(RIGHTMAKE) test-prep
	cd ..\t && $(PERLEXE) -I..\lib harness

test-notty : test-prep
	set PERL_SKIP_TTY_TEST=1 && \
	    cd ..\t && $(PERLEXE) -I.\lib harness

_test : $(RIGHTMAKE)
	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
.IF "$(CCTYPE)" == "BORLAND"
	$(XCOPY) $(GLOBBAT) ..\t\$(NULL)
.ELSE
	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
.ENDIF
	cd ..\t && $(PERLEXE) -I..\lib harness

_clean :
	-@erase miniperlmain$(o)
	-@erase $(MINIPERL)
	-@erase perlglob$(o)
	-@erase perlmain$(o)
	-@erase config.w32
	-@erase /f config.h
	-@erase $(GLOBEXE)
	-@erase $(PERLEXE)
	-@erase $(WPERLEXE)
	-@erase $(PERLDLL)
	-@erase $(CORE_OBJ)
	-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
	-if exist $(MINIDIR) rmdir /s $(MINIDIR)
	-@erase $(WIN32_OBJ)
	-@erase $(DLL_OBJ)
	-@erase $(X2P_OBJ)
	-@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
	-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
	-@erase ..\x2p\*.exe ..\x2p\*.bat
	-@erase *.ilk
	-@erase *.pdb

clean : Extensions_clean _clean

realclean : Extensions_realclean _clean

# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
# Please *don't* use this unless all tests pass.
# If you want to report test failures, use "dmake nok" instead.
ok: utils
	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"

okfile: utils
	$(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok

nok: utils
	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"

nokfile: utils
	$(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok