This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
Metaconfig and Porting patches from Andy; start using the new
[perl5.git] / Porting / config_H
CommitLineData
921b2963
JH
1/* This file (config_H) is a sample config.h file. If you are unable
2 to successfully run Configure, copy this file to config.h and
3 edit it to suit your system.
4*/
85e6fe83
LW
5/*
6 * This file was produced by running the config_h.SH script, which
8d063cd8
LW
7 * gets its values from config.sh, which is generally produced by
8 * running Configure.
9 *
10 * Feel free to modify any of this as the need arises. Note, however,
1aef975c
AD
11 * that running config_h.SH again will wipe out any changes you've made.
12 * For a more permanent change edit config.sh and rerun config_h.SH.
85e6fe83 13 *
dfe9444c 14 * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
8d063cd8 15 */
a687059c 16
dfe9444c
AD
17/*
18 * Package name : perl5
11dc3f68 19 * Source directory : .
ff935051
JH
20 * Configuration time: Sat Jan 15 23:22:46 EET 2000
21 * Configured by : jhi
22 * Target system : osf1 alpha.hut.fi v4.0 878 alpha
68decaef 23 */
68decaef 24
85e6fe83
LW
25#ifndef _config_h_
26#define _config_h_
fe14fcc3 27
dfe9444c
AD
28/* LOC_SED:
29 * This symbol holds the complete pathname to the sed program.
774d564b 30 */
ff935051 31#define LOC_SED "/usr/bin/sed" /**/
774d564b 32
a0d0e21e
LW
33/* HAS_ALARM:
34 * This symbol, if defined, indicates that the alarm routine is
35 * available.
36 */
37#define HAS_ALARM /**/
a687059c 38
ecfc5424
AD
39/* HASATTRIBUTE:
40 * This symbol indicates the C compiler can check for function attributes,
41 * such as printf formats. This is normally only supported by GNU cc.
42 */
ff935051 43/*#define HASATTRIBUTE / **/
ecfc5424
AD
44#ifndef HASATTRIBUTE
45#define __attribute__(_arg_)
46#endif
47
85e6fe83
LW
48/* HAS_BCMP:
49 * This symbol is defined if the bcmp() routine is available to
50 * compare blocks of memory.
a687059c 51 */
9003a523 52#define HAS_BCMP /**/
a687059c 53
85e6fe83
LW
54/* HAS_BCOPY:
55 * This symbol is defined if the bcopy() routine is available to
56 * copy blocks of memory.
a687059c 57 */
9003a523 58#define HAS_BCOPY /**/
fe14fcc3 59
85e6fe83
LW
60/* HAS_BZERO:
61 * This symbol is defined if the bzero() routine is available to
62 * set a memory block to 0.
fe14fcc3 63 */
9003a523 64#define HAS_BZERO /**/
8d063cd8 65
a0d0e21e
LW
66/* HAS_CHOWN:
67 * This symbol, if defined, indicates that the chown routine is
68 * available.
69 */
70#define HAS_CHOWN /**/
71
72/* HAS_CHROOT:
73 * This symbol, if defined, indicates that the chroot routine is
74 * available.
75 */
76#define HAS_CHROOT /**/
8d063cd8 77
85e6fe83 78/* HAS_CHSIZE:
fe14fcc3
LW
79 * This symbol, if defined, indicates that the chsize routine is available
80 * to truncate files. You might need a -lx to get this routine.
81 */
20e68413 82/*#define HAS_CHSIZE / **/
ecfc5424 83
85e6fe83
LW
84/* HASCONST:
85 * This symbol, if defined, indicates that this C compiler knows about
86 * the const type. There is no need to actually test for that symbol
87 * within your programs. The mere use of the "const" keyword will
88 * trigger the necessary tests.
89 */
4633a7c4 90#define HASCONST /**/
85e6fe83
LW
91#ifndef HASCONST
92#define const
93#endif
fe14fcc3 94
85e6fe83 95/* HAS_CRYPT:
a687059c
LW
96 * This symbol, if defined, indicates that the crypt routine is available
97 * to encrypt passwords and the like.
98 */
85e6fe83 99#define HAS_CRYPT /**/
fe14fcc3 100
a0d0e21e
LW
101/* HAS_CUSERID:
102 * This symbol, if defined, indicates that the cuserid routine is
103 * available to get character login names.
a687059c 104 */
a0d0e21e
LW
105#define HAS_CUSERID /**/
106
107/* HAS_DBL_DIG:
108 * This symbol, if defined, indicates that this system's <float.h>
109 * or <limits.h> defines the symbol DBL_DIG, which is the number
110 * of significant digits in a double precision number. If this
111 * symbol is not defined, a guess of 15 is usually pretty good.
112 */
113#define HAS_DBL_DIG /* */
114
115/* HAS_DIFFTIME:
116 * This symbol, if defined, indicates that the difftime routine is
117 * available.
118 */
119#define HAS_DIFFTIME /**/
a687059c 120
ecfc5424
AD
121/* HAS_DLERROR:
122 * This symbol, if defined, indicates that the dlerror routine is
123 * available to return a string describing the last error that
124 * occurred from a call to dlopen(), dlclose() or dlsym().
125 */
4633a7c4 126#define HAS_DLERROR /**/
ecfc5424 127
dfe9444c
AD
128/* SETUID_SCRIPTS_ARE_SECURE_NOW:
129 * This symbol, if defined, indicates that the bug that prevents
130 * setuid scripts from being secure is not present in this kernel.
131 */
132/* DOSUID:
133 * This symbol, if defined, indicates that the C program should
134 * check the script that it is executing for setuid/setgid bits, and
135 * attempt to emulate setuid/setgid on systems that have disabled
136 * setuid #! scripts because the kernel can't do it securely.
137 * It is up to the package designer to make sure that this emulation
138 * is done securely. Among other things, it should do an fstat on
139 * the script it just opened to make sure it really is a setuid/setgid
140 * script, it should make sure the arguments passed correspond exactly
141 * to the argument on the #! line, and it should not trust any
142 * subprocesses to which it must pass the filename rather than the
143 * file descriptor of the script to be executed.
144 */
921b2963 145/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
dfe9444c
AD
146/*#define DOSUID / **/
147
85e6fe83
LW
148/* HAS_DUP2:
149 * This symbol, if defined, indicates that the dup2 routine is
150 * available to duplicate file descriptors.
a687059c 151 */
85e6fe83 152#define HAS_DUP2 /**/
a687059c 153
85e6fe83 154/* HAS_FCHMOD:
a687059c
LW
155 * This symbol, if defined, indicates that the fchmod routine is available
156 * to change mode of opened files. If unavailable, use chmod().
157 */
4633a7c4 158#define HAS_FCHMOD /**/
a687059c 159
85e6fe83 160/* HAS_FCHOWN:
a687059c
LW
161 * This symbol, if defined, indicates that the fchown routine is available
162 * to change ownership of opened files. If unavailable, use chown().
163 */
4633a7c4 164#define HAS_FCHOWN /**/
a687059c 165
85e6fe83 166/* HAS_FCNTL:
fe14fcc3
LW
167 * This symbol, if defined, indicates to the C program that
168 * the fcntl() function exists.
a687059c 169 */
85e6fe83 170#define HAS_FCNTL /**/
a687059c 171
a0d0e21e
LW
172/* HAS_FGETPOS:
173 * This symbol, if defined, indicates that the fgetpos routine is
174 * available to get the file position indicator, similar to ftell().
175 */
4633a7c4 176#define HAS_FGETPOS /**/
a0d0e21e 177
85e6fe83 178/* FLEXFILENAMES:
fe14fcc3
LW
179 * This symbol, if defined, indicates that the system supports filenames
180 * longer than 14 characters.
181 */
4633a7c4 182#define FLEXFILENAMES /**/
fe14fcc3 183
85e6fe83
LW
184/* HAS_FLOCK:
185 * This symbol, if defined, indicates that the flock routine is
a687059c
LW
186 * available to do file locking.
187 */
921b2963 188#define HAS_FLOCK /**/
a0d0e21e
LW
189
190/* HAS_FORK:
191 * This symbol, if defined, indicates that the fork routine is
192 * available.
193 */
194#define HAS_FORK /**/
195
196/* HAS_FSETPOS:
197 * This symbol, if defined, indicates that the fsetpos routine is
198 * available to set the file position indicator, similar to fseek().
199 */
4633a7c4 200#define HAS_FSETPOS /**/
ecfc5424 201
5f05dabc
PP
202/* HAS_GETTIMEOFDAY:
203 * This symbol, if defined, indicates that the gettimeofday() system
204 * call is available for a sub-second accuracy clock. Usually, the file
205 * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
206 * The type "Timeval" should be used to refer to "struct timeval".
207 */
dfe9444c 208#define HAS_GETTIMEOFDAY /**/
5f05dabc
PP
209#ifdef HAS_GETTIMEOFDAY
210#define Timeval struct timeval /* Structure used by gettimeofday() */
211#endif
212
85e6fe83 213/* HAS_GETGROUPS:
a687059c
LW
214 * This symbol, if defined, indicates that the getgroups() routine is
215 * available to get the list of process groups. If unavailable, multiple
216 * groups are probably not supported.
217 */
85e6fe83 218#define HAS_GETGROUPS /**/
a687059c 219
a0d0e21e
LW
220/* HAS_GETLOGIN:
221 * This symbol, if defined, indicates that the getlogin routine is
222 * available to get the login name.
223 */
224#define HAS_GETLOGIN /**/
225
dfe9444c
AD
226/* HAS_GETPGID:
227 * This symbol, if defined, indicates to the C program that
228 * the getpgid(pid) function is available to get the
229 * process group id.
230 */
231#define HAS_GETPGID /**/
232
233/* HAS_GETPGRP:
234 * This symbol, if defined, indicates that the getpgrp routine is
235 * available to get the current process group.
236 */
237/* USE_BSD_GETPGRP:
238 * This symbol, if defined, indicates that getpgrp needs one
239 * arguments whereas USG one needs none.
240 */
241#define HAS_GETPGRP /**/
242/*#define USE_BSD_GETPGRP / **/
243
85e6fe83 244/* HAS_GETPGRP2:
fe14fcc3
LW
245 * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
246 * routine is available to get the current process group.
247 */
20e68413 248/*#define HAS_GETPGRP2 / **/
a687059c 249
a0d0e21e
LW
250/* HAS_GETPPID:
251 * This symbol, if defined, indicates that the getppid routine is
252 * available to get the parent process ID.
253 */
254#define HAS_GETPPID /**/
255
85e6fe83
LW
256/* HAS_GETPRIORITY:
257 * This symbol, if defined, indicates that the getpriority routine is
a687059c
LW
258 * available to get a process's priority.
259 */
9003a523 260#define HAS_GETPRIORITY /**/
a0d0e21e 261
dfe9444c
AD
262/* HAS_INET_ATON:
263 * This symbol, if defined, indicates to the C program that the
264 * inet_aton() function is available to parse IP address "dotted-quad"
265 * strings.
ecfc5424 266 */
921b2963 267#define HAS_INET_ATON /**/
ecfc5424 268
85e6fe83 269/* HAS_KILLPG:
a687059c
LW
270 * This symbol, if defined, indicates that the killpg routine is available
271 * to kill process groups. If unavailable, you probably should use kill
272 * with a negative process number.
273 */
9003a523 274#define HAS_KILLPG /**/
a687059c 275
85e6fe83
LW
276/* HAS_LINK:
277 * This symbol, if defined, indicates that the link routine is
278 * available to create hard links.
fe14fcc3 279 */
85e6fe83 280#define HAS_LINK /**/
fe14fcc3 281
ecfc5424
AD
282/* HAS_LOCALECONV:
283 * This symbol, if defined, indicates that the localeconv routine is
284 * available for numeric and monetary formatting conventions.
285 */
286#define HAS_LOCALECONV /**/
287
a0d0e21e
LW
288/* HAS_LOCKF:
289 * This symbol, if defined, indicates that the lockf routine is
290 * available to do file locking.
291 */
292#define HAS_LOCKF /**/
293
85e6fe83
LW
294/* HAS_LSTAT:
295 * This symbol, if defined, indicates that the lstat routine is
296 * available to do file stats on symbolic links.
a687059c 297 */
85e6fe83 298#define HAS_LSTAT /**/
a687059c 299
a0d0e21e
LW
300/* HAS_MBLEN:
301 * This symbol, if defined, indicates that the mblen routine is available
302 * to find the number of bytes in a multibye character.
303 */
4633a7c4 304#define HAS_MBLEN /**/
a0d0e21e
LW
305
306/* HAS_MBSTOWCS:
307 * This symbol, if defined, indicates that the mbstowcs routine is
308 * available to covert a multibyte string into a wide character string.
309 */
4633a7c4 310#define HAS_MBSTOWCS /**/
a0d0e21e
LW
311
312/* HAS_MBTOWC:
313 * This symbol, if defined, indicates that the mbtowc routine is available
314 * to covert a multibyte to a wide character.
315 */
4633a7c4 316#define HAS_MBTOWC /**/
a0d0e21e 317
85e6fe83
LW
318/* HAS_MEMCMP:
319 * This symbol, if defined, indicates that the memcmp routine is available
320 * to compare blocks of memory.
a687059c 321 */
85e6fe83
LW
322#define HAS_MEMCMP /**/
323
324/* HAS_MEMCPY:
68decaef 325 * This symbol, if defined, indicates that the memcpy routine is available
85e6fe83 326 * to copy blocks of memory.
68decaef 327 */
85e6fe83 328#define HAS_MEMCPY /**/
68decaef 329
85e6fe83 330/* HAS_MEMMOVE:
68decaef 331 * This symbol, if defined, indicates that the memmove routine is available
85e6fe83
LW
332 * to copy potentially overlapping blocks of memory. This should be used
333 * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
334 * own version.
68decaef 335 */
4633a7c4 336#define HAS_MEMMOVE /**/
68decaef 337
85e6fe83 338/* HAS_MEMSET:
68decaef 339 * This symbol, if defined, indicates that the memset routine is available
85e6fe83 340 * to set blocks of memory.
68decaef 341 */
85e6fe83 342#define HAS_MEMSET /**/
a687059c 343
85e6fe83 344/* HAS_MKDIR:
a687059c
LW
345 * This symbol, if defined, indicates that the mkdir routine is available
346 * to create directories. Otherwise you should fork off a new process to
347 * exec /bin/mkdir.
348 */
85e6fe83 349#define HAS_MKDIR /**/
fe14fcc3 350
ecfc5424
AD
351/* HAS_MKFIFO:
352 * This symbol, if defined, indicates that the mkfifo routine is
353 * available to create FIFOs. Otherwise, mknod should be able to
354 * do it for you. However, if mkfifo is there, mknod might require
355 * super-user privileges which mkfifo will not.
356 */
357#define HAS_MKFIFO /**/
358
a0d0e21e
LW
359/* HAS_MKTIME:
360 * This symbol, if defined, indicates that the mktime routine is
361 * available.
362 */
363#define HAS_MKTIME /**/
364
a0d0e21e
LW
365/* HAS_NICE:
366 * This symbol, if defined, indicates that the nice routine is
367 * available.
fe14fcc3 368 */
a0d0e21e 369#define HAS_NICE /**/
fe14fcc3 370
ecfc5424
AD
371/* HAS_PATHCONF:
372 * This symbol, if defined, indicates that pathconf() is available
373 * to determine file-system related limits and options associated
374 * with a given filename.
375 */
376/* HAS_FPATHCONF:
377 * This symbol, if defined, indicates that pathconf() is available
378 * to determine file-system related limits and options associated
379 * with a given open file descriptor.
380 */
381#define HAS_PATHCONF /**/
382#define HAS_FPATHCONF /**/
383
a0d0e21e
LW
384/* HAS_PAUSE:
385 * This symbol, if defined, indicates that the pause routine is
386 * available to suspend a process until a signal is received.
a687059c 387 */
a0d0e21e 388#define HAS_PAUSE /**/
fe14fcc3 389
a0d0e21e
LW
390/* HAS_PIPE:
391 * This symbol, if defined, indicates that the pipe routine is
392 * available to create an inter-process channel.
fe14fcc3 393 */
a0d0e21e
LW
394#define HAS_PIPE /**/
395
4633a7c4
LW
396/* HAS_POLL:
397 * This symbol, if defined, indicates that the poll routine is
dfe9444c
AD
398 * available to poll active file descriptors. You may safely
399 * include <poll.h> when this symbol is defined.
4633a7c4
LW
400 */
401#define HAS_POLL /**/
402
a0d0e21e
LW
403/* HAS_READDIR:
404 * This symbol, if defined, indicates that the readdir routine is
405 * available to read directory entries. You may have to include
406 * <dirent.h>. See I_DIRENT.
407 */
408#define HAS_READDIR /**/
409
410/* HAS_SEEKDIR:
411 * This symbol, if defined, indicates that the seekdir routine is
412 * available. You may have to include <dirent.h>. See I_DIRENT.
413 */
414#define HAS_SEEKDIR /**/
415
416/* HAS_TELLDIR:
417 * This symbol, if defined, indicates that the telldir routine is
418 * available. You may have to include <dirent.h>. See I_DIRENT.
419 */
420#define HAS_TELLDIR /**/
421
422/* HAS_REWINDDIR:
423 * This symbol, if defined, indicates that the rewinddir routine is
424 * available. You may have to include <dirent.h>. See I_DIRENT.
425 */
426#define HAS_REWINDDIR /**/
427
428/* HAS_READLINK:
429 * This symbol, if defined, indicates that the readlink routine is
430 * available to read the value of a symbolic link.
431 */
432#define HAS_READLINK /**/
a687059c 433
85e6fe83 434/* HAS_RENAME:
a687059c
LW
435 * This symbol, if defined, indicates that the rename routine is available
436 * to rename files. Otherwise you should do the unlink(), link(), unlink()
437 * trick.
438 */
85e6fe83 439#define HAS_RENAME /**/
a687059c 440
85e6fe83
LW
441/* HAS_RMDIR:
442 * This symbol, if defined, indicates that the rmdir routine is
443 * available to remove directories. Otherwise you should fork off a
444 * new process to exec /bin/rmdir.
68decaef 445 */
85e6fe83 446#define HAS_RMDIR /**/
68decaef 447
85e6fe83
LW
448/* HAS_SELECT:
449 * This symbol, if defined, indicates that the select routine is
450 * available to select active file descriptors. If the timeout field
451 * is used, <sys/time.h> may need to be included.
68decaef 452 */
85e6fe83 453#define HAS_SELECT /**/
68decaef 454
85e6fe83 455/* HAS_SETEGID:
a687059c
LW
456 * This symbol, if defined, indicates that the setegid routine is available
457 * to change the effective gid of the current program.
458 */
85e6fe83 459#define HAS_SETEGID /**/
a687059c 460
85e6fe83 461/* HAS_SETEUID:
a687059c
LW
462 * This symbol, if defined, indicates that the seteuid routine is available
463 * to change the effective uid of the current program.
464 */
85e6fe83
LW
465#define HAS_SETEUID /**/
466
a0d0e21e
LW
467/* HAS_SETLINEBUF:
468 * This symbol, if defined, indicates that the setlinebuf routine is
469 * available to change stderr or stdout from block-buffered or unbuffered
470 * to a line-buffered mode.
471 */
9003a523 472#define HAS_SETLINEBUF /**/
a0d0e21e
LW
473
474/* HAS_SETLOCALE:
475 * This symbol, if defined, indicates that the setlocale routine is
476 * available to handle locale-specific ctype implementations.
477 */
478#define HAS_SETLOCALE /**/
479
dfe9444c
AD
480/* HAS_SETPGID:
481 * This symbol, if defined, indicates that the setpgid(pid, gpid)
482 * routine is available to set process group ID.
483 */
484#define HAS_SETPGID /**/
485
486/* HAS_SETPGRP:
487 * This symbol, if defined, indicates that the setpgrp routine is
488 * available to set the current process group.
489 */
490/* USE_BSD_SETPGRP:
491 * This symbol, if defined, indicates that setpgrp needs two
492 * arguments whereas USG one needs none. See also HAS_SETPGID
493 * for a POSIX interface.
494 */
495#define HAS_SETPGRP /**/
ff935051 496#define USE_BSD_SETPGRP /**/
dfe9444c 497
85e6fe83 498/* HAS_SETPGRP2:
fe14fcc3
LW
499 * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
500 * routine is available to set the current process group.
501 */
20e68413 502/*#define HAS_SETPGRP2 / **/
fe14fcc3 503
85e6fe83
LW
504/* HAS_SETPRIORITY:
505 * This symbol, if defined, indicates that the setpriority routine is
a687059c
LW
506 * available to set a process's priority.
507 */
9003a523 508#define HAS_SETPRIORITY /**/
a687059c 509
85e6fe83 510/* HAS_SETREGID:
fe14fcc3 511 * This symbol, if defined, indicates that the setregid routine is
85e6fe83
LW
512 * available to change the real and effective gid of the current
513 * process.
a687059c 514 */
85e6fe83 515/* HAS_SETRESGID:
fe14fcc3
LW
516 * This symbol, if defined, indicates that the setresgid routine is
517 * available to change the real, effective and saved gid of the current
85e6fe83 518 * process.
fe14fcc3 519 */
9003a523 520#define HAS_SETREGID /**/
ff935051 521/*#define HAS_SETRESGID / **/
a687059c 522
85e6fe83 523/* HAS_SETREUID:
fe14fcc3 524 * This symbol, if defined, indicates that the setreuid routine is
85e6fe83
LW
525 * available to change the real and effective uid of the current
526 * process.
fe14fcc3 527 */
85e6fe83 528/* HAS_SETRESUID:
fe14fcc3
LW
529 * This symbol, if defined, indicates that the setresuid routine is
530 * available to change the real, effective and saved uid of the current
85e6fe83 531 * process.
a687059c 532 */
9003a523 533#define HAS_SETREUID /**/
ff935051 534/*#define HAS_SETRESUID / **/
a687059c 535
85e6fe83 536/* HAS_SETRGID:
a687059c
LW
537 * This symbol, if defined, indicates that the setrgid routine is available
538 * to change the real gid of the current program.
539 */
ff935051 540#define HAS_SETRGID /**/
a687059c 541
85e6fe83 542/* HAS_SETRUID:
a687059c
LW
543 * This symbol, if defined, indicates that the setruid routine is available
544 * to change the real uid of the current program.
545 */
ff935051 546#define HAS_SETRUID /**/
fe14fcc3 547
85e6fe83
LW
548/* HAS_SETSID:
549 * This symbol, if defined, indicates that the setsid routine is
550 * available to set the process group ID.
fe14fcc3 551 */
85e6fe83 552#define HAS_SETSID /**/
fe14fcc3 553
a0d0e21e
LW
554/* Shmat_t:
555 * This symbol holds the return type of the shmat() system call.
556 * Usually set to 'void *' or 'char *'.
fe14fcc3 557 */
a0d0e21e
LW
558/* HAS_SHMAT_PROTOTYPE:
559 * This symbol, if defined, indicates that the sys/shm.h includes
560 * a prototype for shmat(). Otherwise, it is up to the program to
86959918 561 * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
a0d0e21e
LW
562 * but not always right so it should be emitted by the program only
563 * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
fe14fcc3 564 */
4633a7c4
LW
565#define Shmat_t void * /**/
566#define HAS_SHMAT_PROTOTYPE /**/
a687059c 567
a0d0e21e
LW
568/* HAS_STRCHR:
569 * This symbol is defined to indicate that the strchr()/strrchr()
570 * functions are available for string searching. If not, try the
571 * index()/rindex() pair.
572 */
573/* HAS_INDEX:
574 * This symbol is defined to indicate that the index()/rindex()
575 * functions are available for string searching.
576 */
577#define HAS_STRCHR /**/
20e68413 578/*#define HAS_INDEX / **/
a0d0e21e
LW
579
580/* HAS_STRCOLL:
581 * This symbol, if defined, indicates that the strcoll routine is
582 * available to compare strings using collating information.
583 */
584#define HAS_STRCOLL /**/
585
85e6fe83 586/* USE_STRUCT_COPY:
8d063cd8
LW
587 * This symbol, if defined, indicates that this C compiler knows how
588 * to copy structures. If undefined, you'll need to use a block copy
589 * routine of some sort instead.
590 */
85e6fe83 591#define USE_STRUCT_COPY /**/
fe14fcc3 592
55497cff
PP
593/* HAS_STRTOD:
594 * This symbol, if defined, indicates that the strtod routine is
774d564b 595 * available to provide better numeric string conversion than atof().
55497cff
PP
596 */
597#define HAS_STRTOD /**/
598
599/* HAS_STRTOL:
774d564b
PP
600 * This symbol, if defined, indicates that the strtol routine is available
601 * to provide better numeric string conversion than atoi() and friends.
55497cff
PP
602 */
603#define HAS_STRTOL /**/
604
605/* HAS_STRTOUL:
606 * This symbol, if defined, indicates that the strtoul routine is
774d564b 607 * available to provide conversion of strings to unsigned long.
55497cff
PP
608 */
609#define HAS_STRTOUL /**/
610
a0d0e21e
LW
611/* HAS_STRXFRM:
612 * This symbol, if defined, indicates that the strxfrm() routine is
613 * available to transform strings.
614 */
615#define HAS_STRXFRM /**/
616
85e6fe83 617/* HAS_SYMLINK:
a687059c
LW
618 * This symbol, if defined, indicates that the symlink routine is available
619 * to create symbolic links.
620 */
85e6fe83 621#define HAS_SYMLINK /**/
a687059c 622
85e6fe83
LW
623/* HAS_SYSCALL:
624 * This symbol, if defined, indicates that the syscall routine is
625 * available to call arbitrary system calls. If undefined, that's tough.
a687059c 626 */
85e6fe83 627#define HAS_SYSCALL /**/
a687059c 628
ecfc5424
AD
629/* HAS_SYSCONF:
630 * This symbol, if defined, indicates that sysconf() is available
631 * to determine system related limits and options.
632 */
633#define HAS_SYSCONF /**/
634
85e6fe83
LW
635/* HAS_SYSTEM:
636 * This symbol, if defined, indicates that the system routine is
637 * available to issue a shell command.
68decaef 638 */
85e6fe83 639#define HAS_SYSTEM /**/
68decaef 640
a0d0e21e
LW
641/* HAS_TCGETPGRP:
642 * This symbol, if defined, indicates that the tcgetpgrp routine is
643 * available to get foreground process group ID.
644 */
645#define HAS_TCGETPGRP /**/
646
647/* HAS_TCSETPGRP:
648 * This symbol, if defined, indicates that the tcsetpgrp routine is
649 * available to set foreground process group ID.
85e6fe83 650 */
a0d0e21e 651#define HAS_TCSETPGRP /**/
85e6fe83 652
85e6fe83 653/* HAS_TRUNCATE:
fe14fcc3
LW
654 * This symbol, if defined, indicates that the truncate routine is
655 * available to truncate files.
a687059c 656 */
4633a7c4 657#define HAS_TRUNCATE /**/
a0d0e21e
LW
658
659/* HAS_TZNAME:
660 * This symbol, if defined, indicates that the tzname[] array is
661 * available to access timezone names.
662 */
663#define HAS_TZNAME /**/
664
665/* HAS_UMASK:
666 * This symbol, if defined, indicates that the umask routine is
667 * available to set and get the value of the file creation mask.
668 */
669#define HAS_UMASK /**/
a687059c 670
85e6fe83 671/* HASVOLATILE:
fe14fcc3
LW
672 * This symbol, if defined, indicates that this C compiler knows about
673 * the volatile declaration.
674 */
4633a7c4 675#define HASVOLATILE /**/
85e6fe83
LW
676#ifndef HASVOLATILE
677#define volatile
678#endif
fe14fcc3 679
85e6fe83 680/* HAS_WAIT4:
fe14fcc3
LW
681 * This symbol, if defined, indicates that wait4() exists.
682 */
9003a523 683#define HAS_WAIT4 /**/
fe14fcc3 684
85e6fe83
LW
685/* HAS_WAITPID:
686 * This symbol, if defined, indicates that the waitpid routine is
687 * available to wait for child process.
fe14fcc3 688 */
85e6fe83 689#define HAS_WAITPID /**/
fe14fcc3 690
a0d0e21e
LW
691/* HAS_WCSTOMBS:
692 * This symbol, if defined, indicates that the wcstombs routine is
693 * available to convert wide character strings to multibyte strings.
694 */
4633a7c4 695#define HAS_WCSTOMBS /**/
a0d0e21e
LW
696
697/* HAS_WCTOMB:
698 * This symbol, if defined, indicates that the wctomb routine is available
699 * to covert a wide character to a multibyte.
700 */
4633a7c4 701#define HAS_WCTOMB /**/
a0d0e21e 702
93341792 703/* I_ARPA_INET:
327c3667
GS
704 * This symbol, if defined, indicates to the C program that it should
705 * include <arpa/inet.h> to get inet_addr and friends declarations.
93341792 706 */
11dc3f68 707#define I_ARPA_INET /**/
93341792 708
dfe9444c
AD
709/* I_DBM:
710 * This symbol, if defined, indicates that <dbm.h> exists and should
711 * be included.
232e078e 712 */
dfe9444c
AD
713/* I_RPCSVC_DBM:
714 * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
715 * should be included.
232e078e 716 */
921b2963
JH
717#define I_DBM /**/
718/*#define I_RPCSVC_DBM / **/
232e078e 719
85e6fe83
LW
720/* I_DIRENT:
721 * This symbol, if defined, indicates to the C program that it should
722 * include <dirent.h>. Using this symbol also triggers the definition
723 * of the Direntry_t define which ends up being 'struct dirent' or
724 * 'struct direct' depending on the availability of <dirent.h>.
725 */
726/* DIRNAMLEN:
727 * This symbol, if defined, indicates to the C program that the length
728 * of directory entry names is provided by a d_namlen field. Otherwise
729 * you need to do strlen() on the d_name field.
2b317908 730 */
a0d0e21e
LW
731/* Direntry_t:
732 * This symbol is set to 'struct direct' or 'struct dirent' depending on
733 * whether dirent is available or not. You should use this pseudo type to
734 * portably declare your directory entries.
735 */
85e6fe83 736#define I_DIRENT /**/
ff935051 737#define DIRNAMLEN /**/
85e6fe83 738#define Direntry_t struct dirent
a0d0e21e
LW
739
740/* I_DLFCN:
741 * This symbol, if defined, indicates that <dlfcn.h> exists and should
742 * be included.
743 */
4633a7c4 744#define I_DLFCN /**/
a687059c 745
85e6fe83 746/* I_FCNTL:
fe14fcc3 747 * This manifest constant tells the C program to include <fcntl.h>.
a687059c 748 */
921b2963 749/*#define I_FCNTL / **/
a687059c 750
a0d0e21e
LW
751/* I_FLOAT:
752 * This symbol, if defined, indicates to the C program that it should
753 * include <float.h> to get definition of symbols like DBL_MAX or
754 * DBL_MIN, i.e. machine dependent floating point values.
a687059c 755 */
a0d0e21e 756#define I_FLOAT /**/
a687059c 757
a0d0e21e
LW
758/* I_LIMITS:
759 * This symbol, if defined, indicates to the C program that it should
760 * include <limits.h> to get definition of symbols like WORD_BIT or
761 * LONG_MAX, i.e. machine dependant limitations.
762 */
763#define I_LIMITS /**/
764
dfe9444c
AD
765/* I_LOCALE:
766 * This symbol, if defined, indicates to the C program that it should
767 * include <locale.h>.
768 */
769#define I_LOCALE /**/
770
a0d0e21e
LW
771/* I_MATH:
772 * This symbol, if defined, indicates to the C program that it should
773 * include <math.h>.
774 */
775#define I_MATH /**/
776
777/* I_MEMORY:
778 * This symbol, if defined, indicates to the C program that it should
779 * include <memory.h>.
780 */
20e68413 781/*#define I_MEMORY / **/
a0d0e21e 782
232e078e 783/* I_NDBM:
16d20bd9 784 * This symbol, if defined, indicates that <ndbm.h> exists and should
232e078e
AD
785 * be included.
786 */
ff935051 787#define I_NDBM /**/
232e078e 788
ecfc5424
AD
789/* I_NET_ERRNO:
790 * This symbol, if defined, indicates that <net/errno.h> exists and
791 * should be included.
fe14fcc3 792 */
20e68413 793/*#define I_NET_ERRNO / **/
fe14fcc3 794
85e6fe83 795/* I_NETINET_IN:
a687059c 796 * This symbol, if defined, indicates to the C program that it should
85e6fe83 797 * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
a687059c 798 */
85e6fe83 799#define I_NETINET_IN /**/
85e6fe83 800
dfe9444c
AD
801/* I_SFIO:
802 * This symbol, if defined, indicates to the C program that it should
803 * include <sfio.h>.
804 */
805/*#define I_SFIO / **/
85e6fe83
LW
806
807/* I_STDDEF:
808 * This symbol, if defined, indicates that <stddef.h> exists and should
809 * be included.
fe14fcc3 810 */
85e6fe83
LW
811#define I_STDDEF /**/
812
a0d0e21e
LW
813/* I_STDLIB:
814 * This symbol, if defined, indicates that <stdlib.h> exists and should
815 * be included.
816 */
817#define I_STDLIB /**/
818
85e6fe83
LW
819/* I_STRING:
820 * This symbol, if defined, indicates to the C program that it should
821 * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
fe14fcc3 822 */
85e6fe83
LW
823#define I_STRING /**/
824
825/* I_SYS_DIR:
826 * This symbol, if defined, indicates to the C program that it should
827 * include <sys/dir.h>.
fe14fcc3 828 */
921b2963 829#define I_SYS_DIR /**/
a687059c 830
85e6fe83
LW
831/* I_SYS_FILE:
832 * This symbol, if defined, indicates to the C program that it should
833 * include <sys/file.h> to get definition of R_OK and friends.
a687059c 834 */
921b2963 835#define I_SYS_FILE /**/
a687059c 836
85e6fe83
LW
837/* I_SYS_IOCTL:
838 * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
839 * be included. Otherwise, include <sgtty.h> or <termio.h>.
a687059c 840 */
85e6fe83 841#define I_SYS_IOCTL /**/
a687059c 842
85e6fe83
LW
843/* I_SYS_NDIR:
844 * This symbol, if defined, indicates to the C program that it should
845 * include <sys/ndir.h>.
fe14fcc3 846 */
20e68413 847/*#define I_SYS_NDIR / **/
85e6fe83 848
a0d0e21e
LW
849/* I_SYS_PARAM:
850 * This symbol, if defined, indicates to the C program that it should
851 * include <sys/param.h>.
852 */
853#define I_SYS_PARAM /**/
854
9003a523
PP
855/* I_SYS_RESOURCE:
856 * This symbol, if defined, indicates to the C program that it should
857 * include <sys/resource.h>.
858 */
859#define I_SYS_RESOURCE /**/
860
85e6fe83
LW
861/* I_SYS_SELECT:
862 * This symbol, if defined, indicates to the C program that it should
863 * include <sys/select.h> in order to get definition of struct timeval.
fe14fcc3 864 */
4633a7c4 865#define I_SYS_SELECT /**/
85e6fe83 866
dfe9444c
AD
867/* I_SYS_STAT:
868 * This symbol, if defined, indicates to the C program that it should
869 * include <sys/stat.h>.
870 */
871#define I_SYS_STAT /**/
872
a0d0e21e 873/* I_SYS_TIMES:
85e6fe83 874 * This symbol, if defined, indicates to the C program that it should
a0d0e21e 875 * include <sys/times.h>.
fe14fcc3 876 */
a0d0e21e
LW
877#define I_SYS_TIMES /**/
878
bd89102f
AD
879/* I_SYS_TYPES:
880 * This symbol, if defined, indicates to the C program that it should
881 * include <sys/types.h>.
882 */
883#define I_SYS_TYPES /**/
884
fbfd4aab
PP
885/* I_SYS_UN:
886 * This symbol, if defined, indicates to the C program that it should
887 * include <sys/un.h> to get UNIX domain socket definitions.
888 */
889#define I_SYS_UN /**/
890
9003a523
PP
891/* I_SYS_WAIT:
892 * This symbol, if defined, indicates to the C program that it should
893 * include <sys/wait.h>.
894 */
895#define I_SYS_WAIT /**/
896
a0d0e21e
LW
897/* I_TERMIO:
898 * This symbol, if defined, indicates that the program should include
899 * <termio.h> rather than <sgtty.h>. There are also differences in
900 * the ioctl() calls that depend on the value of this symbol.
901 */
902/* I_TERMIOS:
903 * This symbol, if defined, indicates that the program should include
904 * the POSIX termios.h rather than sgtty.h or termio.h.
905 * There are also differences in the ioctl() calls that depend on the
906 * value of this symbol.
907 */
908/* I_SGTTY:
909 * This symbol, if defined, indicates that the program should include
910 * <sgtty.h> rather than <termio.h>. There are also differences in
911 * the ioctl() calls that depend on the value of this symbol.
912 */
20e68413 913/*#define I_TERMIO / **/
a0d0e21e 914#define I_TERMIOS /**/
20e68413 915/*#define I_SGTTY / **/
a0d0e21e 916
a0d0e21e
LW
917/* I_UNISTD:
918 * This symbol, if defined, indicates to the C program that it should
919 * include <unistd.h>.
920 */
921#define I_UNISTD /**/
922
85e6fe83 923/* I_UTIME:
a687059c 924 * This symbol, if defined, indicates to the C program that it should
85e6fe83 925 * include <utime.h>.
a687059c 926 */
85e6fe83 927#define I_UTIME /**/
a687059c 928
dfe9444c
AD
929/* I_VALUES:
930 * This symbol, if defined, indicates to the C program that it should
931 * include <values.h> to get definition of symbols like MINFLOAT or
932 * MAXLONG, i.e. machine dependant limitations. Probably, you
933 * should use <limits.h> instead, if it is available.
934 */
935#define I_VALUES /**/
936
9003a523
PP
937/* I_STDARG:
938 * This symbol, if defined, indicates that <stdarg.h> exists and should
939 * be included.
940 */
941/* I_VARARGS:
942 * This symbol, if defined, indicates to the C program that it should
943 * include <varargs.h>.
944 */
945#define I_STDARG /**/
20e68413 946/*#define I_VARARGS / **/
9003a523 947
a0d0e21e
LW
948/* I_VFORK:
949 * This symbol, if defined, indicates to the C program that it should
950 * include vfork.h.
951 */
20e68413 952/*#define I_VFORK / **/
fe14fcc3 953
a0d0e21e
LW
954/* CAN_PROTOTYPE:
955 * If defined, this macro indicates that the C compiler can handle
956 * function prototypes.
957 */
958/* _:
959 * This macro is used to declare function parameters for folks who want
960 * to make declarations with prototypes using a different style than
961 * the above macros. Use double parentheses. For example:
962 *
963 * int main _((int argc, char *argv[]));
964 */
4633a7c4 965#define CAN_PROTOTYPE /**/
a0d0e21e
LW
966#ifdef CAN_PROTOTYPE
967#define _(args) args
968#else
969#define _(args) ()
970#endif
85e6fe83 971
dfe9444c
AD
972/* SH_PATH:
973 * This symbol contains the full pathname to the shell used on this
974 * on this system to execute Bourne shell scripts. Usually, this will be
975 * /bin/sh, though it's possible that some systems will have /bin/ksh,
976 * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
977 * D:/bin/sh.exe.
a0d0e21e 978 */
dfe9444c 979#define SH_PATH "/bin/sh" /**/
a0d0e21e 980
85e6fe83
LW
981/* STDCHAR:
982 * This symbol is defined to be the type of char used in stdio.h.
983 * It has the values "unsigned char" or "char".
fe14fcc3 984 */
ff935051 985#define STDCHAR unsigned char /**/
327c3667 986
aaacdc8b
GS
987/* CROSSCOMPILE:
988 * This symbol, if defined, signifies that we our
989 * build process is a cross-compilation.
990 */
991/*#define CROSSCOMPILE / **/
992
993/* INTSIZE:
994 * This symbol contains the value of sizeof(int) so that the C
995 * preprocessor can make decisions based on it.
996 */
997/* LONGSIZE:
998 * This symbol contains the value of sizeof(long) so that the C
999 * preprocessor can make decisions based on it.
1000 */
1001/* SHORTSIZE:
1002 * This symbol contains the value of sizeof(short) so that the C
1003 * preprocessor can make decisions based on it.
de1c2614 1004 */
aaacdc8b 1005#define INTSIZE 4 /**/
ff935051 1006#define LONGSIZE 8 /**/
aaacdc8b
GS
1007#define SHORTSIZE 2 /**/
1008
1009/* MULTIARCH:
1010 * This symbol, if defined, signifies that the build
1011 * process will produce some binary files that are going to be
1012 * used in a cross-platform environment. This is the case for
1013 * example with the NeXT "fat" binaries that contain executables
1014 * for several CPUs.
a22e52b9 1015 */
aaacdc8b
GS
1016/*#define MULTIARCH / **/
1017
1018/* HAS_QUAD:
1019 * This symbol, if defined, tells that there's a 64-bit integer type,
1020 * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
1021 * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
a22e52b9 1022 */
de1c2614 1023#define HAS_QUAD /**/
e0a10278 1024#ifdef HAS_QUAD
ff935051
JH
1025# define Quad_t long /**/
1026# define Uquad_t unsigned long /**/
1027# define QUADKIND 2 /**/
e0a10278
JH
1028# define QUAD_IS_INT 1
1029# define QUAD_IS_LONG 2
1030# define QUAD_IS_LONG_LONG 3
1031# define QUAD_IS_INT64_T 4
1032#endif
a22e52b9 1033
327c3667
GS
1034/* HAS_ACCESSX:
1035 * This symbol, if defined, indicates that the accessx routine is
1036 * available to do extended access checks.
1037 */
11dc3f68 1038/*#define HAS_ACCESSX / **/
327c3667
GS
1039
1040/* HAS_EACCESS:
1041 * This symbol, if defined, indicates that the eaccess routine is
1042 * available to do extended access checks.
1043 */
11dc3f68 1044/*#define HAS_EACCESS / **/
327c3667
GS
1045
1046/* I_SYS_ACCESS:
1047 * This symbol, if defined, indicates to the C program that it should
921b2963 1048 * include <sys/access.h>.
327c3667 1049 */
ff935051 1050#define I_SYS_ACCESS /**/
327c3667
GS
1051
1052/* I_SYS_SECURITY:
1053 * This symbol, if defined, indicates to the C program that it should
1054 * include <sys/security.h>.
1055 */
ff935051
JH
1056#define I_SYS_SECURITY /**/
1057
1058/* OSNAME:
1059 * This symbol contains the name of the operating system, as determined
1060 * by Configure. You shouldn't rely on it too much; the specific
1061 * feature tests from Configure are generally more reliable.
1062 */
1063#define OSNAME "dec_osf" /**/
af4c28eb 1064
dfe9444c 1065/* MEM_ALIGNBYTES:
af4c28eb
CS
1066 * This symbol contains the number of bytes required to align a
1067 * double. Usual values are 2, 4 and 8. The default is eight,
1068 * for safety.
5f05dabc 1069 */
af4c28eb
CS
1070#if defined(CROSSCOMPILE) || defined(MULTIARCH)
1071# define MEM_ALIGNBYTES 8
1072#else
ff935051 1073#define MEM_ALIGNBYTES 8
af4c28eb 1074#endif
5f05dabc 1075
ff935051
JH
1076/* ARCHLIB:
1077 * This variable, if defined, holds the name of the directory in
1078 * which the user wants to put architecture-dependent public
1079 * library files for perl5. It is most often a local directory
1080 * such as /usr/local/lib. Programs using this variable must be
1081 * prepared to deal with filename expansion. If ARCHLIB is the
1082 * same as PRIVLIB, it is not defined, since presumably the
1083 * program already searches PRIVLIB.
1084 */
1085/* ARCHLIB_EXP:
1086 * This symbol contains the ~name expanded version of ARCHLIB, to be used
1087 * in programs that are not prepared to deal with ~ expansion at run-time.
1088 */
1089#define ARCHLIB "/opt/perl/lib/5.5.640/alpha-dec_osf-thread-multi" /**/
1090#define ARCHLIB_EXP "/opt/perl/lib/5.5.640/alpha-dec_osf-thread-multi" /**/
1091
1092/* ARCHNAME:
1093 * This symbol holds a string representing the architecture name.
1094 * It may be used to construct an architecture-dependant pathname
1095 * where library files may be held under a private library, for
1096 * instance.
1097 */
1098#define ARCHNAME "alpha-dec_osf-thread-multi" /**/
1099
1100/* HAS_ATOLF:
1101 * This symbol, if defined, indicates that the atolf routine is
1102 * available to convert strings into long doubles.
1103 */
1104/*#define HAS_ATOLF / **/
1105
1106/* HAS_ATOLL:
1107 * This symbol, if defined, indicates that the atoll routine is
1108 * available to convert strings into long longs.
1109 */
1110/*#define HAS_ATOLL / **/
1111
1112/* BIN:
1113 * This symbol holds the path of the bin directory where the package will
1114 * be installed. Program must be prepared to deal with ~name substitution.
1115 */
1116/* BIN_EXP:
1117 * This symbol is the filename expanded version of the BIN symbol, for
1118 * programs that do not want to deal with that at run-time.
1119 */
1120#define BIN "/opt/perl/bin" /**/
1121#define BIN_EXP "/opt/perl/bin" /**/
1122
1123/* PERL_BINCOMPAT_5005:
1124 * This symbol, if defined, indicates that Perl 5.006 should be
1125 * binary-compatible with Perl 5.005. This is impossible for builds
1126 * that use features like threads and multiplicity it is always
1127 * for those versions.
1128 */
1129/*#define PERL_BINCOMPAT_5005 / **/
1130
4633a7c4 1131/* BYTEORDER:
9003a523 1132 * This symbol holds the hexadecimal constant defined in byteorder,
4633a7c4 1133 * i.e. 0x1234 or 0x4321, etc...
af4c28eb
CS
1134 * If the compiler supports cross-compiling or multiple-architecture
1135 * binaries (eg. on NeXT systems), use compiler-defined macros to
1136 * determine the byte order.
dfe9444c 1137 * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
9003a523
PP
1138 * Binaries (MAB) on either big endian or little endian machines.
1139 * The endian-ness is available at compile-time. This only matters
1140 * for perl, where the config.h can be generated and installed on
1141 * one system, and used by a different architecture to build an
1142 * extension. Older versions of NeXT that might not have
1143 * defined either *_ENDIAN__ were all on Motorola 680x0 series,
1144 * so the default case (for NeXT) is big endian to catch them.
1145 * This might matter for NeXT 3.0.
1146 */
af4c28eb
CS
1147#if defined(CROSSCOMPILE) || defined(MULTIARCH)
1148# ifdef __LITTLE_ENDIAN__
1149# if LONGSIZE == 4
1150# define BYTEORDER 0x1234
1151# else
1152# if LONGSIZE == 8
1153# define BYTEORDER 0x12345678
1154# endif
1155# endif
1156# else
1157# ifdef __BIG_ENDIAN__
1158# if LONGSIZE == 4
1159# define BYTEORDER 0x4321
1160# else
1161# if LONGSIZE == 8
1162# define BYTEORDER 0x87654321
1163# endif
1164# endif
1165# endif
1166# endif
1167# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
1168# define BYTEORDER 0x4321
1169# endif
1170#else
ff935051 1171#define BYTEORDER 0x12345678 /* large digits for MSB */
9003a523 1172#endif /* NeXT */
4633a7c4 1173
ff935051
JH
1174/* CAT2:
1175 * This macro catenates 2 tokens together.
1176 */
1177/* STRINGIFY:
1178 * This macro surrounds its token with double quotes.
1179 */
1180#if 42 == 1
1181#define CAT2(a,b)a/**/b
1182#define STRINGIFY(a)"a"
1183 /* If you can get stringification with catify, tell me how! */
1184#endif
1185#if 42 == 42
1186#define CAT2(a,b)a ## b
1187#define StGiFy(a)# a
1188#define STRINGIFY(a)StGiFy(a)
1189#endif
1190#if 42 != 1 && 42 != 42
1191#include "Bletch: How does this C preprocessor catenate tokens?"
1192#endif
1193
1194/* CPPSTDIN:
1195 * This symbol contains the first part of the string which will invoke
1196 * the C preprocessor on the standard input and produce to standard
1197 * output. Typical value of "cc -E" or "/lib/cpp", but it can also
1198 * call a wrapper. See CPPRUN.
1199 */
1200/* CPPMINUS:
1201 * This symbol contains the second part of the string which will invoke
1202 * the C preprocessor on the standard input and produce to standard
1203 * output. This symbol will have the value "-" if CPPSTDIN needs a minus
1204 * to specify standard input, otherwise the value is "".
1205 */
1206/* CPPRUN:
1207 * This symbol contains the string which will invoke a C preprocessor on
1208 * the standard input and produce to standard output. It needs to end
1209 * with CPPLAST, after all other preprocessor flags have been specified.
1210 * The main difference with CPPSTDIN is that this program will never be a
1211 * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
1212 * available directly to the user. Note that it may well be different from
1213 * the preprocessor used to compile the C program.
1214 */
1215#define CPPSTDIN "cppstdin"
1216#define CPPMINUS ""
1217#define CPPRUN "/usr/bin/cpp"
1218
1219/* HAS_ACCESS:
1220 * This manifest constant lets the C program know that the access()
1221 * system call is available to check for accessibility using real UID/GID.
1222 * (always present on UNIX.)
1223 */
1224#define HAS_ACCESS /**/
1225
dfe9444c
AD
1226/* CASTI32:
1227 * This symbol is defined if the C compiler can cast negative
1228 * or large floating point numbers to 32-bit ints.
1aef975c 1229 */
11dc3f68 1230/*#define CASTI32 / **/
1aef975c 1231
dfe9444c
AD
1232/* CASTNEGFLOAT:
1233 * This symbol is defined if the C compiler can cast negative
1234 * numbers to unsigned longs, ints and shorts.
85e6fe83 1235 */
dfe9444c
AD
1236/* CASTFLAGS:
1237 * This symbol contains flags that say what difficulties the compiler
1238 * has casting odd floating values to unsigned long:
1239 * 0 = ok
1240 * 1 = couldn't cast < 0
1241 * 2 = couldn't cast >= 0x80000000
1242 * 4 = couldn't cast in argument expression list
fbfd4aab 1243 */
e5c9fcd0
AD
1244#define CASTNEGFLOAT /**/
1245#define CASTFLAGS 0 /**/
dfe9444c
AD
1246
1247/* VOID_CLOSEDIR:
1248 * This symbol, if defined, indicates that the closedir() routine
1249 * does not return a value.
fbfd4aab 1250 */
dfe9444c 1251/*#define VOID_CLOSEDIR / **/
fbfd4aab 1252
ff935051
JH
1253/* HAS_CSH:
1254 * This symbol, if defined, indicates that the C-shell exists.
1255 */
1256/* CSH:
1257 * This symbol, if defined, contains the full pathname of csh.
1258 */
1259#define HAS_CSH /**/
1260#ifdef HAS_CSH
1261#define CSH "/usr/bin/csh" /**/
1262#endif
1263
1264/* DLSYM_NEEDS_UNDERSCORE:
1265 * This symbol, if defined, indicates that we need to prepend an
1266 * underscore to the symbol name before calling dlsym(). This only
1267 * makes sense if you *have* dlsym, which we will presume is the
1268 * case if you're using dl_dlopen.xs.
1269 */
1270/*#define DLSYM_NEEDS_UNDERSCORE / **/
1271
1272/* HAS_DRAND48_PROTO:
1273 * This symbol, if defined, indicates that the system provides
1274 * a prototype for the drand48() function. Otherwise, it is up
1275 * to the program to supply one. A good guess is
1276 * extern double drand48 _((void));
1277 */
1278#define HAS_DRAND48_PROTO /**/
1279
1280/* HAS_ENDGRENT:
1281 * This symbol, if defined, indicates that the getgrent routine is
1282 * available for finalizing sequential access of the group database.
1283 */
1284#define HAS_ENDGRENT /**/
1285
1286/* HAS_ENDHOSTENT:
1287 * This symbol, if defined, indicates that the endhostent() routine is
1288 * available to close whatever was being used for host queries.
1289 */
1290#define HAS_ENDHOSTENT /**/
1291
1292/* HAS_ENDNETENT:
1293 * This symbol, if defined, indicates that the endnetent() routine is
1294 * available to close whatever was being used for network queries.
1295 */
1296#define HAS_ENDNETENT /**/
1297
1298/* HAS_ENDPROTOENT:
1299 * This symbol, if defined, indicates that the endprotoent() routine is
1300 * available to close whatever was being used for protocol queries.
1301 */
1302#define HAS_ENDPROTOENT /**/
1303
1304/* HAS_ENDPWENT:
1305 * This symbol, if defined, indicates that the getgrent routine is
1306 * available for finalizing sequential access of the passwd database.
1307 */
1308#define HAS_ENDPWENT /**/
1309
1310/* HAS_ENDSERVENT:
1311 * This symbol, if defined, indicates that the endservent() routine is
1312 * available to close whatever was being used for service queries.
1313 */
1314#define HAS_ENDSERVENT /**/
1315
1316/* HAS_ENDSPENT:
1317 * This symbol, if defined, indicates that the endspent system call is
1318 * available to finalize the scan of SysV shadow password entries.
1319 */
1320/*#define HAS_ENDSPENT / **/
1321
921b2963
JH
1322/* HAS_FD_SET:
1323 * This symbol, when defined, indicates presence of the fd_set typedef
1324 * in <sys/types.h>
1325 */
1326#define HAS_FD_SET /**/
1327
ff935051
JH
1328/* HAS_STRUCT_FS_DATA:
1329 * This symbol, if defined, indicates that the struct fs_data
1330 * to do statfs() is supported.
1331 */
1332/*#define HAS_STRUCT_FS_DATA / **/
1333
1334/* HAS_FSEEKO:
1335 * This symbol, if defined, indicates that the fseeko routine is
1336 * available to fseek beyond 32 bits (useful for ILP32 hosts).
1337 */
1338/*#define HAS_FSEEKO / **/
1339
1340/* HAS_FSTATFS:
1341 * This symbol, if defined, indicates that the fstatfs routine is
1342 * available to stat filesystems by file descriptors.
1343 */
1344#define HAS_FSTATFS /**/
1345/* HAS_FTELLO:
1346 * This symbol, if defined, indicates that the ftello routine is
1347 * available to ftell beyond 32 bits (useful for ILP32 hosts).
1348 */
1349/*#define HAS_FTELLO / **/
1350
4633a7c4
LW
1351/* Gconvert:
1352 * This preprocessor macro is defined to convert a floating point
1353 * number to a string without a trailing decimal point. This
1354 * emulates the behavior of sprintf("%g"), but is sometimes much more
1355 * efficient. If gconvert() is not available, but gcvt() drops the
1356 * trailing decimal point, then gcvt() is used. If all else fails,
1357 * a macro using sprintf("%g") is used. Arguments for the Gconvert
1358 * macro are: value, number of digits, whether trailing zeros should
1359 * be retained, and the output buffer.
1360 * Possible values are:
1361 * d_Gconvert='gconvert((x),(n),(t),(b))'
1362 * d_Gconvert='gcvt((x),(n),(b))'
1363 * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
1364 * The last two assume trailing zeros should not be kept.
1365 */
921b2963 1366#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
4633a7c4 1367
ff935051
JH
1368/* HAS_GETGRENT:
1369 * This symbol, if defined, indicates that the getgrent routine is
1370 * available for sequential access of the group database.
d103522a 1371 */
ff935051 1372#define HAS_GETGRENT /**/
d103522a 1373
ff935051
JH
1374/* HAS_GETHOSTBYADDR:
1375 * This symbol, if defined, indicates that the gethostbyaddr() routine is
1376 * available to look up hosts by their IP addresses.
dd64f1c3 1377 */
ff935051 1378#define HAS_GETHOSTBYADDR /**/
dd64f1c3 1379
ff935051
JH
1380/* HAS_GETHOSTBYNAME:
1381 * This symbol, if defined, indicates that the gethostbyname() routine is
1382 * available to look up host names in some data base or other.
774d564b 1383 */
ff935051 1384#define HAS_GETHOSTBYNAME /**/
774d564b 1385
ff935051
JH
1386/* HAS_GETHOSTENT:
1387 * This symbol, if defined, indicates that the gethostent() routine is
1388 * available to look up host names in some data base or another.
d103522a 1389 */
ff935051 1390#define HAS_GETHOSTENT /**/
d103522a 1391
ff935051
JH
1392/* HAS_GETHOSTNAME:
1393 * This symbol, if defined, indicates that the C program may use the
1394 * gethostname() routine to derive the host name. See also HAS_UNAME
1395 * and PHOSTNAME.
d103522a 1396 */
ff935051
JH
1397/* HAS_UNAME:
1398 * This symbol, if defined, indicates that the C program may use the
1399 * uname() routine to derive the host name. See also HAS_GETHOSTNAME
1400 * and PHOSTNAME.
af4c28eb
CS
1401 */
1402/* PHOSTNAME:
1403 * This symbol, if defined, indicates the command to feed to the
1404 * popen() routine to derive the host name. See also HAS_GETHOSTNAME
1405 * and HAS_UNAME. Note that the command uses a fully qualified path,
1406 * so that it is safe even if used by a process with super-user
1407 * privileges.
1408 */
11dc3f68 1409#define HAS_GETHOSTNAME /**/
af4c28eb
CS
1410#define HAS_UNAME /**/
1411#undef HAS_PHOSTNAME
1412#ifdef HAS_PHOSTNAME
0617aed7 1413#define PHOSTNAME "" /* How to get the host name */
af4c28eb
CS
1414#endif
1415
ff935051
JH
1416/* HAS_GETHOST_PROTOS:
1417 * This symbol, if defined, indicates that <netdb.h> includes
1418 * prototypes for gethostent(), gethostbyname(), and
1419 * gethostbyaddr(). Otherwise, it is up to the program to guess
1420 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1421 */
1422#define HAS_GETHOST_PROTOS /**/
1423
1424/* HAS_GETMNT:
1425 * This symbol, if defined, indicates that the getmnt routine is
1426 * available to get filesystem mount info by filename.
1427 */
1428/*#define HAS_GETMNT / **/
1429
1430/* HAS_GETMNTENT:
1431 * This symbol, if defined, indicates that the getmntent routine is
1432 * available to iterate through mounted file systems to get their info.
1433 */
1434/*#define HAS_GETMNTENT / **/
1435
693762b4
AD
1436/* HAS_GETNETBYADDR:
1437 * This symbol, if defined, indicates that the getnetbyaddr() routine is
1438 * available to look up networks by their IP addresses.
1439 */
11dc3f68 1440#define HAS_GETNETBYADDR /**/
693762b4
AD
1441
1442/* HAS_GETNETBYNAME:
1443 * This symbol, if defined, indicates that the getnetbyname() routine is
1444 * available to look up networks by their names.
1445 */
11dc3f68 1446#define HAS_GETNETBYNAME /**/
693762b4 1447
e5c9fcd0
AD
1448/* HAS_GETNETENT:
1449 * This symbol, if defined, indicates that the getnetent() routine is
1450 * available to look up network names in some data base or another.
1451 */
11dc3f68 1452#define HAS_GETNETENT /**/
e5c9fcd0 1453
ff935051
JH
1454/* HAS_GETNET_PROTOS:
1455 * This symbol, if defined, indicates that <netdb.h> includes
1456 * prototypes for getnetent(), getnetbyname(), and
1457 * getnetbyaddr(). Otherwise, it is up to the program to guess
1458 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1459 */
1460#define HAS_GETNET_PROTOS /**/
1461
e5c9fcd0
AD
1462/* HAS_GETPROTOENT:
1463 * This symbol, if defined, indicates that the getprotoent() routine is
1464 * available to look up protocols in some data base or another.
1465 */
11dc3f68 1466#define HAS_GETPROTOENT /**/
e5c9fcd0 1467
693762b4
AD
1468/* HAS_GETPROTOBYNAME:
1469 * This symbol, if defined, indicates that the getprotobyname()
1470 * routine is available to look up protocols by their name.
1471 */
1472/* HAS_GETPROTOBYNUMBER:
1473 * This symbol, if defined, indicates that the getprotobynumber()
1474 * routine is available to look up protocols by their number.
1475 */
11dc3f68
JH
1476#define HAS_GETPROTOBYNAME /**/
1477#define HAS_GETPROTOBYNUMBER /**/
693762b4 1478
ff935051
JH
1479/* HAS_GETPROTO_PROTOS:
1480 * This symbol, if defined, indicates that <netdb.h> includes
1481 * prototypes for getprotoent(), getprotobyname(), and
1482 * getprotobyaddr(). Otherwise, it is up to the program to guess
1483 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1484 */
1485#define HAS_GETPROTO_PROTOS /**/
1486
327c3667
GS
1487/* HAS_GETPWENT:
1488 * This symbol, if defined, indicates that the getpwent routine is
1489 * available for sequential access of the passwd database.
1490 * If this is not available, the older getpw() function may be available.
1491 */
11dc3f68 1492#define HAS_GETPWENT /**/
327c3667 1493
e5c9fcd0
AD
1494/* HAS_GETSERVENT:
1495 * This symbol, if defined, indicates that the getservent() routine is
1496 * available to look up network services in some data base or another.
1497 */
11dc3f68 1498#define HAS_GETSERVENT /**/
e5c9fcd0 1499
ff935051
JH
1500/* HAS_GETSERV_PROTOS:
1501 * This symbol, if defined, indicates that <netdb.h> includes
1502 * prototypes for getservent(), getservbyname(), and
1503 * getservbyaddr(). Otherwise, it is up to the program to guess
1504 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1505 */
1506#define HAS_GETSERV_PROTOS /**/
1507
1508/* HAS_GETSPENT:
1509 * This symbol, if defined, indicates that the getspent system call is
1510 * available to retrieve SysV shadow password entries sequentially.
1511 */
1512/*#define HAS_GETSPENT / **/
1513
1514/* HAS_GETSPNAM:
1515 * This symbol, if defined, indicates that the getspnam system call is
1516 * available to retrieve SysV shadow password entries by name.
1517 */
1518/*#define HAS_GETSPNAM / **/
1519
693762b4
AD
1520/* HAS_GETSERVBYNAME:
1521 * This symbol, if defined, indicates that the getservbyname()
1522 * routine is available to look up services by their name.
1523 */
1524/* HAS_GETSERVBYPORT:
1525 * This symbol, if defined, indicates that the getservbyport()
1526 * routine is available to look up services by their port.
1527 */
11dc3f68
JH
1528#define HAS_GETSERVBYNAME /**/
1529#define HAS_GETSERVBYPORT /**/
693762b4 1530
ff935051
JH
1531/* HAS_GNULIBC:
1532 * This symbol, if defined, indicates to the C program that
1533 * the GNU C library is being used.
1534 */
1535/*#define HAS_GNULIBC / **/
1536/* HAS_HASMNTOPT:
1537 * This symbol, if defined, indicates that the hasmntopt routine is
1538 * available to query the mount options of file systems.
1539 */
1540/*#define HAS_HASMNTOPT / **/
1541
327c3667
GS
1542/* HAS_HTONL:
1543 * This symbol, if defined, indicates that the htonl() routine (and
1544 * friends htons() ntohl() ntohs()) are available to do network
1545 * order byte swapping.
1546 */
1547/* HAS_HTONS:
1548 * This symbol, if defined, indicates that the htons() routine (and
1549 * friends htonl() ntohl() ntohs()) are available to do network
1550 * order byte swapping.
1551 */
1552/* HAS_NTOHL:
1553 * This symbol, if defined, indicates that the ntohl() routine (and
1554 * friends htonl() htons() ntohs()) are available to do network
1555 * order byte swapping.
1556 */
1557/* HAS_NTOHS:
1558 * This symbol, if defined, indicates that the ntohs() routine (and
1559 * friends htonl() htons() ntohl()) are available to do network
1560 * order byte swapping.
1561 */
1562#define HAS_HTONL /**/
1563#define HAS_HTONS /**/
1564#define HAS_NTOHL /**/
1565#define HAS_NTOHS /**/
1566
ff935051
JH
1567/* HAS_ISASCII:
1568 * This manifest constant lets the C program know that isascii
1569 * is available.
1570 */
1571#define HAS_ISASCII /**/
1572
1573/* HAS_LCHOWN:
1574 * This symbol, if defined, indicates that the lchown routine is
1575 * available to operate on a symbolic link (instead of following the
1576 * link).
1577 */
1578#define HAS_LCHOWN /**/
1579
1580/* HAS_LDBL_DIG:
1581 * This symbol, if defined, indicates that this system's <float.h>
1582 * or <limits.h> defines the symbol LDBL_DIG, which is the number
1583 * of significant digits in a long double precision number. Unlike
1584 * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
1585 */
1586#define HAS_LDBL_DIG /* */
1587
e5c9fcd0
AD
1588/* HAS_LONG_DOUBLE:
1589 * This symbol will be defined if the C compiler supports long
1590 * doubles.
1591 */
ff935051
JH
1592/* LONG_DOUBLESIZE:
1593 * This symbol contains the size of a long double, so that the
1594 * C preprocessor can make decisions based on it. It is only
1595 * defined if the system supports long doubles.
1596 */
1597#define HAS_LONG_DOUBLE /**/
1598#ifdef HAS_LONG_DOUBLE
1599#define LONG_DOUBLESIZE 8 /**/
1600#endif
1601
1602/* HAS_LONG_LONG:
1603 * This symbol will be defined if the C compiler supports long long.
1604 */
1605/* LONGLONGSIZE:
1606 * This symbol contains the size of a long long, so that the
1607 * C preprocessor can make decisions based on it. It is only
1608 * defined if the system supports long long.
1609 */
1610#define HAS_LONG_LONG /**/
1611#ifdef HAS_LONG_LONG
1612#define LONGLONGSIZE 8 /**/
1613#endif
1614
1615/* HAS_MEMCHR:
1616 * This symbol, if defined, indicates that the memchr routine is available
1617 * to locate characters within a C string.
1618 */
1619#define HAS_MEMCHR /**/
1620
1621/* HAS_MSG:
1622 * This symbol, if defined, indicates that the entire msg*(2) library is
1623 * supported (IPC mechanism based on message queues).
1624 */
1625#define HAS_MSG /**/
1626
1627/* HAS_OPEN3:
1628 * This manifest constant lets the C program know that the three
1629 * argument form of open(2) is available.
1630 */
1631#define HAS_OPEN3 /**/
1632
1633/* OLD_PTHREAD_CREATE_JOINABLE:
1634 * This symbol, if defined, indicates how to create pthread
1635 * in joinable (aka undetached) state. NOTE: not defined
1636 * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
1637 * (the new version of the constant).
1638 * If defined, known values are PTHREAD_CREATE_UNDETACHED
1639 * and __UNDETACHED.
1640 */
1641/*#define OLD_PTHREAD_CREATE_JOINABLE / **/
1642
1643/* HAS_PTHREAD_YIELD:
1644 * This symbol, if defined, indicates that the pthread_yield
1645 * routine is available to yield the execution of the current
1646 * thread. sched_yield is preferable to pthread_yield.
1647 */
1648/* SCHED_YIELD:
1649 * This symbol defines the way to yield the execution of
1650 * the current thread. Known ways are sched_yield,
1651 * pthread_yield, and pthread_yield with NULL.
1652 */
1653/* HAS_SCHED_YIELD:
1654 * This symbol, if defined, indicates that the sched_yield
1655 * routine is available to yield the execution of the current
1656 * thread. sched_yield is preferable to pthread_yield.
e5c9fcd0 1657 */
ff935051
JH
1658/*#define HAS_PTHREAD_YIELD / **/
1659#define SCHED_YIELD sched_yield() /**/
1660#define HAS_SCHED_YIELD /**/
e5c9fcd0 1661
ff935051
JH
1662/* HAS_SAFE_BCOPY:
1663 * This symbol, if defined, indicates that the bcopy routine is available
1664 * to copy potentially overlapping memory blocks. Otherwise you should
1665 * probably use memmove() or memcpy(). If neither is defined, roll your
1666 * own version.
dc45a647 1667 */
ff935051 1668#define HAS_SAFE_BCOPY /**/
dc45a647 1669
ff935051
JH
1670/* HAS_SAFE_MEMCPY:
1671 * This symbol, if defined, indicates that the memcpy routine is available
1672 * to copy potentially overlapping memory blocks. Otherwise you should
1673 * probably use memmove() or memcpy(). If neither is defined, roll your
1674 * own version.
a71cd7cd 1675 */
ff935051 1676/*#define HAS_SAFE_MEMCPY / **/
a71cd7cd 1677
ff935051
JH
1678/* HAS_SANE_MEMCMP:
1679 * This symbol, if defined, indicates that the memcmp routine is available
1680 * and can be used to compare relative magnitudes of chars with their high
1681 * bits set. If it is not defined, roll your own version.
327c3667 1682 */
ff935051 1683#define HAS_SANE_MEMCMP /**/
327c3667
GS
1684
1685/* HAS_SEM:
1686 * This symbol, if defined, indicates that the entire sem*(2) library is
1687 * supported.
1688 */
1689#define HAS_SEM /**/
1690
1691/* HAS_SETGRENT:
1692 * This symbol, if defined, indicates that the setgrent routine is
1693 * available for initializing sequential access of the group database.
1694 */
11dc3f68 1695#define HAS_SETGRENT /**/
327c3667 1696
dfe9444c
AD
1697/* HAS_SETGROUPS:
1698 * This symbol, if defined, indicates that the setgroups() routine is
1699 * available to set the list of process groups. If unavailable, multiple
1700 * groups are probably not supported.
4633a7c4 1701 */
dfe9444c
AD
1702#define HAS_SETGROUPS /**/
1703
693762b4
AD
1704/* HAS_SETHOSTENT:
1705 * This symbol, if defined, indicates that the sethostent() routine is
1706 * available.
1707 */
11dc3f68 1708#define HAS_SETHOSTENT /**/
693762b4 1709
e5c9fcd0
AD
1710/* HAS_SETNETENT:
1711 * This symbol, if defined, indicates that the setnetent() routine is
1712 * available.
1713 */
11dc3f68 1714#define HAS_SETNETENT /**/
e5c9fcd0
AD
1715
1716/* HAS_SETPROTOENT:
1717 * This symbol, if defined, indicates that the setprotoent() routine is
1718 * available.
1719 */
11dc3f68 1720#define HAS_SETPROTOENT /**/
e5c9fcd0 1721
327c3667
GS
1722/* HAS_SETPWENT:
1723 * This symbol, if defined, indicates that the setpwent routine is
1724 * available for initializing sequential access of the passwd database.
1725 */
11dc3f68 1726#define HAS_SETPWENT /**/
327c3667 1727
e5c9fcd0
AD
1728/* HAS_SETSERVENT:
1729 * This symbol, if defined, indicates that the setservent() routine is
ff935051 1730 * available.
de4597cb 1731 */
ff935051 1732#define HAS_SETSERVENT /**/
de4597cb 1733
ff935051
JH
1734/* HAS_SETSPENT:
1735 * This symbol, if defined, indicates that the setspent system call is
1736 * available to initialize the scan of SysV shadow password entries.
9003a523 1737 */
ff935051
JH
1738/*#define HAS_SETSPENT / **/
1739
1740/* HAS_SETVBUF:
1741 * This symbol, if defined, indicates that the setvbuf routine is
1742 * available to change buffering on an open stdio stream.
1743 * to a line-buffered mode.
16d20bd9 1744 */
ff935051 1745#define HAS_SETVBUF /**/
bfb7748a 1746
ff935051
JH
1747/* USE_SFIO:
1748 * This symbol, if defined, indicates that sfio should
1749 * be used.
bfb7748a 1750 */
ff935051 1751/*#define USE_SFIO / **/
9003a523 1752
ff935051
JH
1753/* HAS_SHM:
1754 * This symbol, if defined, indicates that the entire shm*(2) library is
1755 * supported.
c4f23d77 1756 */
ff935051
JH
1757#define HAS_SHM /**/
1758
1759/* HAS_SIGACTION:
1760 * This symbol, if defined, indicates that Vr4's sigaction() routine
1761 * is available.
c4f23d77 1762 */
ff935051 1763#define HAS_SIGACTION /**/
c4f23d77 1764
ff935051
JH
1765/* HAS_SIGSETJMP:
1766 * This variable indicates to the C program that the sigsetjmp()
1767 * routine is available to save the calling process's registers
1768 * and stack environment for later use by siglongjmp(), and
1769 * to optionally save the process's signal mask. See
1770 * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
4633a7c4 1771 */
ff935051
JH
1772/* Sigjmp_buf:
1773 * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
1774 */
1775/* Sigsetjmp:
1776 * This macro is used in the same way as sigsetjmp(), but will invoke
1777 * traditional setjmp() if sigsetjmp isn't available.
1778 * See HAS_SIGSETJMP.
1779 */
1780/* Siglongjmp:
1781 * This macro is used in the same way as siglongjmp(), but will invoke
1782 * traditional longjmp() if siglongjmp isn't available.
1783 * See HAS_SIGSETJMP.
1784 */
1785#define HAS_SIGSETJMP /**/
1786#ifdef HAS_SIGSETJMP
1787#define Sigjmp_buf sigjmp_buf
1788#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
1789#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
1790#else
1791#define Sigjmp_buf jmp_buf
1792#define Sigsetjmp(buf,save_mask) setjmp((buf))
1793#define Siglongjmp(buf,retval) longjmp((buf),(retval))
bfb7748a 1794#endif
fbfd4aab 1795
ff935051
JH
1796/* HAS_SOCKET:
1797 * This symbol, if defined, indicates that the BSD socket interface is
1798 * supported.
8c09e4ca 1799 */
ff935051
JH
1800/* HAS_SOCKETPAIR:
1801 * This symbol, if defined, indicates that the BSD socketpair() call is
1802 * supported.
8c09e4ca 1803 */
ff935051
JH
1804/* HAS_MSG_CTRUNC:
1805 * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
1806 * Checking just with #ifdef might not be enough because this symbol
1807 * has been known to be an enum.
d71b2b6b 1808 */
ff935051
JH
1809/* HAS_MSG_DONTROUTE:
1810 * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
1811 * Checking just with #ifdef might not be enough because this symbol
1812 * has been known to be an enum.
1813 */
1814/* HAS_MSG_OOB:
1815 * This symbol, if defined, indicates that the MSG_OOB is supported.
1816 * Checking just with #ifdef might not be enough because this symbol
1817 * has been known to be an enum.
1818 */
1819/* HAS_MSG_PEEK:
1820 * This symbol, if defined, indicates that the MSG_PEEK is supported.
1821 * Checking just with #ifdef might not be enough because this symbol
1822 * has been known to be an enum.
1823 */
1824/* HAS_MSG_PROXY:
1825 * This symbol, if defined, indicates that the MSG_PROXY is supported.
1826 * Checking just with #ifdef might not be enough because this symbol
1827 * has been known to be an enum.
1828 */
1829/* HAS_SCM_RIGHTS:
1830 * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
1831 * Checking just with #ifdef might not be enough because this symbol
1832 * has been known to be an enum.
1833 */
1834#define HAS_SOCKET /**/
1835#define HAS_SOCKETPAIR /**/
1836#define HAS_MSG_CTRUNC /**/
1837#define HAS_MSG_DONTROUTE /**/
1838#define HAS_MSG_OOB /**/
1839#define HAS_MSG_PEEK /**/
1840/*#define HAS_MSG_PROXY / **/
1841#define HAS_SCM_RIGHTS /**/
d71b2b6b 1842
ff935051
JH
1843/* HAS_SQRTL:
1844 * This symbol, if defined, indicates that the sqrtl routine is
1845 * available to do long double square roots.
dfe9444c 1846 */
ff935051 1847#define HAS_SQRTL /**/
dfe9444c 1848
ff935051
JH
1849/* USE_STAT_BLOCKS:
1850 * This symbol is defined if this system has a stat structure declaring
1851 * st_blksize and st_blocks.
86959918 1852 */
ff935051
JH
1853#ifndef USE_STAT_BLOCKS
1854#define USE_STAT_BLOCKS /**/
1855#endif
86959918 1856
ff935051
JH
1857/* HAS_STRUCT_STATFS_F_FLAGS:
1858 * This symbol, if defined, indicates that the struct statfs
1859 * does have the f_flags member containing the mount flags of
1860 * the filesystem containing the file.
1861 * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
1862 * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
1863 * have statfs() and struct statfs, they have ustat() and getmnt()
1864 * with struct ustat and struct fs_data.
ad27e871 1865 */
ff935051 1866#define HAS_STRUCT_STATFS_F_FLAGS /**/
ad27e871 1867
ff935051
JH
1868/* HAS_STRUCT_STATFS:
1869 * This symbol, if defined, indicates that the struct statfs
1870 * to do statfs() is supported.
327c3667 1871 */
ff935051 1872#define HAS_STRUCT_STATFS /**/
327c3667 1873
ff935051
JH
1874/* HAS_FSTATVFS:
1875 * This symbol, if defined, indicates that the fstatvfs routine is
0545a864
JH
1876 * available to stat filesystems by file descriptors.
1877 */
ff935051 1878#define HAS_FSTATVFS /**/
327c3667 1879
ff935051
JH
1880/* USE_STDIO_PTR:
1881 * This symbol is defined if the _ptr and _cnt fields (or similar)
1882 * of the stdio FILE structure can be used to access the stdio buffer
1883 * for a file handle. If this is defined, then the FILE_ptr(fp)
1884 * and FILE_cnt(fp) macros will also be defined and should be used
1885 * to access these fields.
ad27e871 1886 */
ff935051
JH
1887/* FILE_ptr:
1888 * This macro is used to access the _ptr field (or equivalent) of the
1889 * FILE structure pointed to by its argument. This macro will always be
1890 * defined if USE_STDIO_PTR is defined.
ccc7f9b3 1891 */
ff935051
JH
1892/* STDIO_PTR_LVALUE:
1893 * This symbol is defined if the FILE_ptr macro can be used as an
1894 * lvalue.
86959918 1895 */
ff935051
JH
1896/* FILE_cnt:
1897 * This macro is used to access the _cnt field (or equivalent) of the
1898 * FILE structure pointed to by its argument. This macro will always be
1899 * defined if USE_STDIO_PTR is defined.
86959918 1900 */
ff935051
JH
1901/* STDIO_CNT_LVALUE:
1902 * This symbol is defined if the FILE_cnt macro can be used as an
1903 * lvalue.
ccc7f9b3 1904 */
ff935051
JH
1905#define USE_STDIO_PTR /**/
1906#ifdef USE_STDIO_PTR
1907#define FILE_ptr(fp) ((fp)->_ptr)
1908#define STDIO_PTR_LVALUE /**/
1909#define FILE_cnt(fp) ((fp)->_cnt)
1910#define STDIO_CNT_LVALUE /**/
1911#endif
ccc7f9b3 1912
ff935051
JH
1913/* USE_STDIO_BASE:
1914 * This symbol is defined if the _base field (or similar) of the
1915 * stdio FILE structure can be used to access the stdio buffer for
1916 * a file handle. If this is defined, then the FILE_base(fp) macro
1917 * will also be defined and should be used to access this field.
1918 * Also, the FILE_bufsiz(fp) macro will be defined and should be used
1919 * to determine the number of bytes in the buffer. USE_STDIO_BASE
1920 * will never be defined unless USE_STDIO_PTR is.
e0a10278 1921 */
ff935051
JH
1922/* FILE_base:
1923 * This macro is used to access the _base field (or equivalent) of the
1924 * FILE structure pointed to by its argument. This macro will always be
1925 * defined if USE_STDIO_BASE is defined.
ca24dfc6 1926 */
ff935051
JH
1927/* FILE_bufsiz:
1928 * This macro is used to determine the number of bytes in the I/O
1929 * buffer pointed to by _base field (or equivalent) of the FILE
1930 * structure pointed to its argument. This macro will always be defined
1931 * if USE_STDIO_BASE is defined.
86959918 1932 */
ff935051
JH
1933#define USE_STDIO_BASE /**/
1934#ifdef USE_STDIO_BASE
1935#define FILE_base(fp) ((fp)->_base)
1936#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
1937#endif
86959918 1938
ff935051
JH
1939/* HAS_STRERROR:
1940 * This symbol, if defined, indicates that the strerror routine is
1941 * available to translate error numbers to strings. See the writeup
1942 * of Strerror() in this file before you try to define your own.
dfe9444c 1943 */
ff935051
JH
1944/* HAS_SYS_ERRLIST:
1945 * This symbol, if defined, indicates that the sys_errlist array is
1946 * available to translate error numbers to strings. The extern int
1947 * sys_nerr gives the size of that table.
68d4903c 1948 */
ff935051
JH
1949/* Strerror:
1950 * This preprocessor symbol is defined as a macro if strerror() is
1951 * not available to translate error numbers to strings but sys_errlist[]
1952 * array is there.
1953 */
1954#define HAS_STRERROR /**/
1955#define HAS_SYS_ERRLIST /**/
1956#define Strerror(e) strerror(e)
68d4903c 1957
ff935051
JH
1958/* HAS_STRTOLD:
1959 * This symbol, if defined, indicates that the strtold routine is
1960 * available to convert strings to long doubles.
ff49bff8 1961 */
ff935051 1962/*#define HAS_STRTOLD / **/
ff49bff8 1963
ff935051
JH
1964/* HAS_STRTOULL:
1965 * This symbol, if defined, indicates that the strtoull routine is
1966 * available to convert strings to unsigned long longs.
ad27e871 1967 */
ff935051 1968/*#define HAS_STRTOULL / **/
ad27e871 1969
ff935051
JH
1970/* HAS_STRTOUQ:
1971 * This symbol, if defined, indicates that the strtouq routine is
1972 * available to convert strings to unsigned long longs (quads).
ff49bff8 1973 */
ff935051 1974/*#define HAS_STRTOUQ / **/
ff49bff8
JH
1975
1976/* HAS_TELLDIR_PROTO:
1977 * This symbol, if defined, indicates that the system provides
1978 * a prototype for the telldir() function. Otherwise, it is up
1979 * to the program to supply one. A good guess is
86959918 1980 * extern long telldir _((DIR*));
ff49bff8 1981 */
11dc3f68 1982#define HAS_TELLDIR_PROTO /**/
ff49bff8 1983
ff935051
JH
1984/* Time_t:
1985 * This symbol holds the type returned by time(). It can be long,
1986 * or time_t on BSD sites (in which case <sys/types.h> should be
1987 * included).
1988 */
1989#define Time_t time_t /* Time type */
1990
1991/* HAS_TIMES:
1992 * This symbol, if defined, indicates that the times() routine exists.
1993 * Note that this became obsolete on some systems (SUNOS), which now
1994 * use getrusage(). It may be necessary to include <sys/times.h>.
1995 */
1996#define HAS_TIMES /**/
1997
1998/* HAS_UNION_SEMUN:
1999 * This symbol, if defined, indicates that the union semun is
2000 * defined by including <sys/sem.h>. If not, the user code
2001 * probably needs to define it as:
2002 * union semun {
2003 * int val;
2004 * struct semid_ds *buf;
2005 * unsigned short *array;
2006 * }
2007 */
2008/* USE_SEMCTL_SEMUN:
2009 * This symbol, if defined, indicates that union semun is
2010 * used for semctl IPC_STAT.
2011 */
2012/* USE_SEMCTL_SEMID_DS:
2013 * This symbol, if defined, indicates that struct semid_ds * is
2014 * used for semctl IPC_STAT.
2015 */
2016/*#define HAS_UNION_SEMUN / **/
2017#define USE_SEMCTL_SEMUN /**/
2018#define USE_SEMCTL_SEMID_DS /**/
2019
0545a864
JH
2020/* HAS_USTAT:
2021 * This symbol, if defined, indicates that the ustat system call is
2022 * available to query file system statistics by dev_t.
2023 */
2024#define HAS_USTAT /**/
2025
ff935051
JH
2026/* HAS_VFORK:
2027 * This symbol, if defined, indicates that vfork() exists.
2028 */
2029/*#define HAS_VFORK / **/
2030
2031/* Signal_t:
2032 * This symbol's value is either "void" or "int", corresponding to the
2033 * appropriate return type of a signal handler. Thus, you can declare
2034 * a signal handler using "Signal_t (*handler)()", and define the
2035 * handler using "Signal_t handler(sig)".
2036 */
2037#define Signal_t void /* Signal handler's return type */
2038
2039/* HAS_VPRINTF:
2040 * This symbol, if defined, indicates that the vprintf routine is available
2041 * to printf with a pointer to an argument list. If unavailable, you
2042 * may need to write your own, probably in terms of _doprnt().
2043 */
2044/* USE_CHAR_VSPRINTF:
2045 * This symbol is defined if this system has vsprintf() returning type
2046 * (char*). The trend seems to be to declare it as "int vsprintf()". It
2047 * is up to the package author to declare vsprintf correctly based on the
2048 * symbol.
2049 */
2050#define HAS_VPRINTF /**/
2051/*#define USE_CHAR_VSPRINTF / **/
2052
dfe9444c
AD
2053/* USE_DYNAMIC_LOADING:
2054 * This symbol, if defined, indicates that dynamic loading of
2055 * some sort is available.
2056 */
2057#define USE_DYNAMIC_LOADING /**/
2058
ff935051
JH
2059/* DOUBLESIZE:
2060 * This symbol contains the size of a double, so that the C preprocessor
2061 * can make decisions based on it.
2062 */
2063#define DOUBLESIZE 8 /**/
2064
2065/* EBCDIC:
2066 * This symbol, if defined, indicates that this system uses
2067 * EBCDIC encoding.
2068 */
2069/*#define EBCDIC / **/
2070
a71cd7cd
JH
2071/* FFLUSH_NULL:
2072 * This symbol, if defined, tells that fflush(NULL) does flush
2073 * all pending stdio output.
2074 */
2075/* FFLUSH_ALL:
2076 * This symbol, if defined, tells that to flush
2077 * all pending stdio output one must loop through all
2078 * the stdio file handles stored in an array and fflush them.
a32a45b6
JH
2079 * Note that if fflushNULL is defined, fflushall will not
2080 * even be probed for and will be left undefined.
a71cd7cd 2081 */
11dc3f68
JH
2082#define FFLUSH_NULL /**/
2083/*#define FFLUSH_ALL / **/
a71cd7cd 2084
ff935051
JH
2085/* Fpos_t:
2086 * This symbol holds the type used to declare file positions in libc.
2087 * It can be fpos_t, long, uint, etc... It may be necessary to include
2088 * <sys/types.h> to get any typedef'ed information.
2089 */
2090#define Fpos_t fpos_t /* File position type */
2091
2092/* Gid_t_f:
2093 * This symbol defines the format string used for printing a Gid_t.
2094 */
2095#define Gid_t_f "u" /**/
2096
2097/* Gid_t_size:
2098 * This symbol holds the size of a Gid_t in bytes.
2099 */
2100#define Gid_t_size 4 /* GID size */
2101
2102/* Gid_t:
2103 * This symbol holds the return type of getgid() and the type of
2104 * argument to setrgid() and related functions. Typically,
2105 * it is the type of group ids in the kernel. It can be int, ushort,
2106 * uid_t, etc... It may be necessary to include <sys/types.h> to get
2107 * any typedef'ed information.
2108 */
2109#define Gid_t gid_t /* Type for getgid(), etc... */
2110
2111/* Groups_t:
2112 * This symbol holds the type used for the second argument to
2113 * getgroups() and setgropus(). Usually, this is the same as
2114 * gidtype (gid_t) , but sometimes it isn't.
2115 * It can be int, ushort, uid_t, etc...
2116 * It may be necessary to include <sys/types.h> to get any
2117 * typedef'ed information. This is only required if you have
2118 * getgroups() or setgropus()..
2119 */
2120#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
2121#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
2122#endif
2123
dfe9444c
AD
2124/* DB_Prefix_t:
2125 * This symbol contains the type of the prefix structure element
2126 * in the <db.h> header file. In older versions of DB, it was
2127 * int, while in newer ones it is u_int32_t.
2128 */
2129/* DB_Hash_t:
2130 * This symbol contains the type of the prefix structure element
2131 * in the <db.h> header file. In older versions of DB, it was
2132 * int, while in newer ones it is size_t.
2133 */
0617aed7
JH
2134#define DB_Hash_t u_int32_t /**/
2135#define DB_Prefix_t size_t /**/
dfe9444c 2136
ff935051
JH
2137/* I_GRP:
2138 * This symbol, if defined, indicates to the C program that it should
2139 * include <grp.h>.
2140 */
2141/* GRPASSWD:
2142 * This symbol, if defined, indicates to the C program that struct group
2143 * in <grp.h> contains gr_passwd.
2144 */
2145#define I_GRP /**/
2146#define GRPASSWD /**/
2147
327c3667
GS
2148/* I_INTTYPES:
2149 * This symbol, if defined, indicates to the C program that it should
2150 * include <inttypes.h>.
2151 */
ff935051
JH
2152/*#define I_INTTYPES / **/
2153
2154/* I_MACH_CTHREADS:
2155 * This symbol, if defined, indicates to the C program that it should
2156 * include <mach/cthreads.h>.
2157 */
2158/*#define I_MACH_CTHREADS / **/
327c3667 2159
ff49bff8
JH
2160/* I_MNTENT:
2161 * This symbol, if defined, indicates that <mntent.h> exists and
2162 * should be included.
2163 */
ff935051
JH
2164/*#define I_MNTENT / **/
2165
2166/* I_NETDB:
2167 * This symbol, if defined, indicates that <netdb.h> exists and
2168 * should be included.
2169 */
2170#define I_NETDB /**/
ff49bff8 2171
a71cd7cd
JH
2172/* I_NETINET_TCP:
2173 * This symbol, if defined, indicates to the C program that it should
2174 * include <netinet/tcp.h>.
2175 */
ff935051
JH
2176#define I_NETINET_TCP /**/
2177
2178/* I_POLL:
2179 * This symbol, if defined, indicates that <poll.h> exists and
2180 * should be included.
2181 */
2182#define I_POLL /**/
2183
2184/* I_PTHREAD:
2185 * This symbol, if defined, indicates to the C program that it should
2186 * include <pthread.h>.
2187 */
2188#define I_PTHREAD /**/
2189
2190/* I_PWD:
2191 * This symbol, if defined, indicates to the C program that it should
2192 * include <pwd.h>.
2193 */
2194/* PWQUOTA:
2195 * This symbol, if defined, indicates to the C program that struct passwd
2196 * contains pw_quota.
2197 */
2198/* PWAGE:
2199 * This symbol, if defined, indicates to the C program that struct passwd
2200 * contains pw_age.
2201 */
2202/* PWCHANGE:
2203 * This symbol, if defined, indicates to the C program that struct passwd
2204 * contains pw_change.
2205 */
2206/* PWCLASS:
2207 * This symbol, if defined, indicates to the C program that struct passwd
2208 * contains pw_class.
2209 */
2210/* PWEXPIRE:
2211 * This symbol, if defined, indicates to the C program that struct passwd
2212 * contains pw_expire.
2213 */
2214/* PWCOMMENT:
2215 * This symbol, if defined, indicates to the C program that struct passwd
2216 * contains pw_comment.
2217 */
2218/* PWGECOS:
2219 * This symbol, if defined, indicates to the C program that struct passwd
2220 * contains pw_gecos.
5b34fd99 2221 */
ff935051
JH
2222/* PWPASSWD:
2223 * This symbol, if defined, indicates to the C program that struct passwd
2224 * contains pw_passwd.
2225 */
2226#define I_PWD /**/
2227#define PWQUOTA /**/
2228/*#define PWAGE / **/
2229/*#define PWCHANGE / **/
2230/*#define PWCLASS / **/
2231/*#define PWEXPIRE / **/
2232#define PWCOMMENT /**/
2233#define PWGECOS /**/
2234#define PWPASSWD /**/
5b34fd99 2235
86959918
JH
2236/* I_SHADOW:
2237 * This symbol, if defined, indicates that <shadow.h> exists and
2238 * should be included.
2239 */
ff935051 2240/*#define I_SHADOW / **/
86959918
JH
2241
2242/* I_SOCKS:
2243 * This symbol, if defined, indicates that <socks.h> exists and
2244 * should be included.
2245 */
11dc3f68 2246/*#define I_SOCKS / **/
86959918 2247
ff49bff8
JH
2248/* I_SYS_MOUNT:
2249 * This symbol, if defined, indicates that <sys/mount.h> exists and
2250 * should be included.
2251 */
11dc3f68 2252#define I_SYS_MOUNT /**/
ff49bff8 2253
0545a864
JH
2254/* I_SYS_STATFS:
2255 * This symbol, if defined, indicates that <sys/statfs.h> exists.
2256 */
ff935051 2257/*#define I_SYS_STATFS / **/
0545a864 2258
ff49bff8
JH
2259/* I_SYS_STATVFS:
2260 * This symbol, if defined, indicates that <sys/statvfs.h> exists and
2261 * should be included.
2262 */
11dc3f68 2263#define I_SYS_STATVFS /**/
0545a864 2264
ff935051
JH
2265/* I_SYSUIO:
2266 * This symbol, if defined, indicates that <sys/uio.h> exists and
2267 * should be included.
2268 */
2269#define I_SYSUIO /**/
2270
0545a864
JH
2271/* I_SYS_VFS:
2272 * This symbol, if defined, indicates that <sys/vfs.h> exists and
2273 * should be included.
2274 */
ff935051
JH
2275/*#define I_SYS_VFS / **/
2276
2277/* I_TIME:
2278 * This symbol, if defined, indicates to the C program that it should
2279 * include <time.h>.
2280 */
2281/* I_SYS_TIME:
2282 * This symbol, if defined, indicates to the C program that it should
2283 * include <sys/time.h>.
2284 */
2285/* I_SYS_TIME_KERNEL:
2286 * This symbol, if defined, indicates to the C program that it should
2287 * include <sys/time.h> with KERNEL defined.
2288 */
2289/*#define I_TIME / **/
2290#define I_SYS_TIME /**/
2291/*#define I_SYS_TIME_KERNEL / **/
0545a864
JH
2292
2293/* I_USTAT:
2294 * This symbol, if defined, indicates that <ustat.h> exists and
2295 * should be included.
2296 */
2297#define I_USTAT /**/
ff49bff8 2298
ff935051
JH
2299/* PERL_INC_VERSION_LIST:
2300 * This variable specifies the list of subdirectories in over
2301 * which perl.c:incpush() and lib/lib.pm will automatically
2302 * search when adding directories to @INC, in a format suitable
2303 * for a C initialization string. See the inc_version_list entry
2304 * in Porting/Glossary for more details.
2305 */
2306#define PERL_INC_VERSION_LIST /**/
2307
327c3667
GS
2308/* HAS_OFF64_T:
2309 * This symbol will be defined if the C compiler supports off64_t.
2310 */
ca24dfc6
LV
2311/* HAS_FPOS64_T:
2312 * This symbol will be defined if the C compiler supports fpos64_t.
2313 */
2314/*#define HAS_OFF64_T / **/
2315/*#define HAS_FPOS64_T / **/
8c09e4ca
JH
2316
2317/* PERL_PRIfldbl:
2318 * This symbol, if defined, contains the string used by stdio to
2319 * format long doubles (format 'f') for output.
2320 */
2321/* PERL_PRIgldbl:
2322 * This symbol, if defined, contains the string used by stdio to
2323 * format long doubles (format 'g') for output.
2324 */
ff935051
JH
2325#define PERL_PRIfldbl "f" /**/
2326#define PERL_PRIgldbl "g" /**/
2327
2328/* Off_t:
2329 * This symbol holds the type used to declare offsets in the kernel.
2330 * It can be int, long, off_t, etc... It may be necessary to include
2331 * <sys/types.h> to get any typedef'ed information.
2332 */
2333/* LSEEKSIZE:
2334 * This symbol holds the number of bytes used by the Off_t.
2335 */
2336/* Off_t_size:
2337 * This symbol holds the number of bytes used by the Off_t.
2338 */
2339#define Off_t off_t /* <offset> type */
2340#define LSEEKSIZE 8 /* <offset> size */
2341#define Off_t_size 8 /* <offset> size */
2342
2343/* Free_t:
2344 * This variable contains the return type of free(). It is usually
2345 * void, but occasionally int.
2346 */
2347/* Malloc_t:
2348 * This symbol is the type of pointer returned by malloc and realloc.
2349 */
2350#define Malloc_t void * /**/
2351#define Free_t void /**/
2352
2353/* MYMALLOC:
2354 * This symbol, if defined, indicates that we're using our own malloc.
2355 */
2356/*#define MYMALLOC / **/
2357
2358/* Mode_t:
2359 * This symbol holds the type used to declare file modes
2360 * for systems calls. It is usually mode_t, but may be
2361 * int or unsigned short. It may be necessary to include <sys/types.h>
2362 * to get any typedef'ed information.
2363 */
2364#define Mode_t mode_t /* file mode parameter for system calls */
2365
2366/* VAL_O_NONBLOCK:
2367 * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
2368 * non-blocking I/O for the file descriptor. Note that there is no way
2369 * back, i.e. you cannot turn it blocking again this way. If you wish to
2370 * alternatively switch between blocking and non-blocking, use the
2371 * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
2372 */
2373/* VAL_EAGAIN:
2374 * This symbol holds the errno error code set by read() when no data was
2375 * present on the non-blocking file descriptor.
2376 */
2377/* RD_NODATA:
2378 * This symbol holds the return code from read() when no data is present
2379 * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
2380 * not defined, then you can't distinguish between no data and EOF by
2381 * issuing a read(). You'll have to find another way to tell for sure!
2382 */
2383/* EOF_NONBLOCK:
2384 * This symbol, if defined, indicates to the C program that a read() on
2385 * a non-blocking file descriptor will return 0 on EOF, and not the value
2386 * held in RD_NODATA (-1 usually, in that case!).
2387 */
2388#define VAL_O_NONBLOCK O_NONBLOCK
2389#define VAL_EAGAIN EAGAIN
2390#define RD_NODATA -1
2391#define EOF_NONBLOCK
2392
2393/* Netdb_host_t:
2394 * This symbol holds the type used for the 1st argument
2395 * to gethostbyaddr().
2396 */
2397/* Netdb_hlen_t:
2398 * This symbol holds the type used for the 2nd argument
2399 * to gethostbyaddr().
2400 */
2401/* Netdb_name_t:
2402 * This symbol holds the type used for the argument to
2403 * gethostbyname().
2404 */
2405/* Netdb_net_t:
2406 * This symbol holds the type used for the 1st argument to
2407 * getnetbyaddr().
2408 */
2409#define Netdb_host_t const char * /**/
2410#define Netdb_hlen_t int /**/
2411#define Netdb_name_t const char * /**/
2412#define Netdb_net_t int /**/
8c09e4ca 2413
a22e52b9
JH
2414/* IVTYPE:
2415 * This symbol defines the C type used for Perl's IV.
8c09e4ca 2416 */
a22e52b9
JH
2417/* UVTYPE:
2418 * This symbol defines the C type used for Perl's UV.
8c09e4ca 2419 */
a22e52b9
JH
2420/* I8TYPE:
2421 * This symbol defines the C type used for Perl's I8.
ca24dfc6 2422 */
a22e52b9
JH
2423/* U8TYPE:
2424 * This symbol defines the C type used for Perl's U8.
2425 */
2426/* I16TYPE:
2427 * This symbol defines the C type used for Perl's I16.
2428 */
2429/* U16TYPE:
2430 * This symbol defines the C type used for Perl's U16.
2431 */
2432/* I32TYPE:
2433 * This symbol defines the C type used for Perl's I32.
2434 */
2435/* U32TYPE:
2436 * This symbol defines the C type used for Perl's U32.
2437 */
2438/* I64TYPE:
2439 * This symbol defines the C type used for Perl's I64.
2440 */
2441/* U64TYPE:
2442 * This symbol defines the C type used for Perl's U64.
2443 */
2444/* NVTYPE:
2445 * This symbol defines the C type used for Perl's NV.
2446 */
2447/* IVSIZE:
2448 * This symbol contains the sizeof(IV).
2449 */
2450/* UVSIZE:
2451 * This symbol contains the sizeof(UV).
2452 */
2453/* I8SIZE:
2454 * This symbol contains the sizeof(I8).
2455 */
2456/* U8SIZE:
2457 * This symbol contains the sizeof(U8).
2458 */
2459/* I16SIZE:
2460 * This symbol contains the sizeof(I16).
2461 */
2462/* U16SIZE:
2463 * This symbol contains the sizeof(U16).
8c09e4ca 2464 */
a22e52b9
JH
2465/* I32SIZE:
2466 * This symbol contains the sizeof(I32).
2467 */
2468/* U32SIZE:
2469 * This symbol contains the sizeof(U32).
2470 */
2471/* I64SIZE:
2472 * This symbol contains the sizeof(I64).
2473 */
2474/* U64SIZE:
2475 * This symbol contains the sizeof(U64).
2476 */
ff935051
JH
2477#define IVTYPE long /**/
2478#define UVTYPE unsigned long /**/
a22e52b9
JH
2479#define I8TYPE char /**/
2480#define U8TYPE unsigned char /**/
2481#define I16TYPE short /**/
2482#define U16TYPE unsigned short /**/
ff935051
JH
2483#define I32TYPE int /**/
2484#define U32TYPE unsigned int /**/
de1c2614 2485#ifdef HAS_QUAD
ff935051
JH
2486#define I64TYPE long /**/
2487#define U64TYPE unsigned long /**/
a22e52b9
JH
2488#endif
2489#define NVTYPE double /**/
2490#define IVSIZE 8 /**/
2491#define UVSIZE 8 /**/
2492#define I8SIZE 1 /**/
2493#define U8SIZE 1 /**/
2494#define I16SIZE 2 /**/
2495#define U16SIZE 2 /**/
2496#define I32SIZE 4 /**/
2497#define U32SIZE 4 /**/
de1c2614 2498#ifdef HAS_QUAD
a22e52b9
JH
2499#define I64SIZE 8 /**/
2500#define U64SIZE 8 /**/
2501#endif
a22e52b9
JH
2502
2503/* IVdf:
2504 * This symbol defines the format string used for printing a Perl IV
2505 * as a signed decimal integer.
2506 */
2507/* UVuf:
2508 * This symbol defines the format string used for printing a Perl UV
2509 * as an unsigned decimal integer.
2510 */
2511/* UVof:
2512 * This symbol defines the format string used for printing a Perl UV
2513 * as an unsigned octal integer.
2514 */
2515/* UVxf:
2516 * This symbol defines the format string used for printing a Perl UV
2517 * as an unsigned hexadecimal integer.
2518 */
ff935051
JH
2519#define IVdf "ld" /**/
2520#define UVuf "lu" /**/
2521#define UVof "lo" /**/
2522#define UVxf "lx" /**/
2523
2524/* Pid_t:
2525 * This symbol holds the type used to declare process ids in the kernel.
2526 * It can be int, uint, pid_t, etc... It may be necessary to include
2527 * <sys/types.h> to get any typedef'ed information.
2528 */
2529#define Pid_t pid_t /* PID type */
2530
2531/* PRIVLIB:
2532 * This symbol contains the name of the private library for this package.
2533 * The library is private in the sense that it needn't be in anyone's
2534 * execution path, but it should be accessible by the world. The program
2535 * should be prepared to do ~ expansion.
2536 */
2537/* PRIVLIB_EXP:
2538 * This symbol contains the ~name expanded version of PRIVLIB, to be used
2539 * in programs that are not prepared to deal with ~ expansion at run-time.
2540 */
2541#define PRIVLIB "/opt/perl/lib/5.5.640" /**/
2542#define PRIVLIB_EXP "/opt/perl/lib/5.5.640" /**/
2543
2544/* PTRSIZE:
2545 * This symbol contains the size of a pointer, so that the C preprocessor
2546 * can make decisions based on it. It will be sizeof(void *) if
2547 * the compiler supports (void *); otherwise it will be
2548 * sizeof(char *).
2549 */
2550#define PTRSIZE 8 /**/
2551
2552/* Drand01:
2553 * This macro is to be used to generate uniformly distributed
2554 * random numbers over the range [0., 1.[. You may have to supply
2555 * an 'extern double drand48();' in your program since SunOS 4.1.3
2556 * doesn't provide you with anything relevant in it's headers.
2557 * See HAS_DRAND48_PROTO.
2558 */
2559/* Rand_seed_t:
2560 * This symbol defines the type of the argument of the
2561 * random seed function.
2562 */
2563/* seedDrand01:
2564 * This symbol defines the macro to be used in seeding the
2565 * random number generator (see Drand01).
2566 */
2567/* RANDBITS:
2568 * This symbol indicates how many bits are produced by the
2569 * function used to generate normalized random numbers.
2570 * Values include 15, 16, 31, and 48.
2571 */
2572#define Drand01() drand48() /**/
2573#define Rand_seed_t long /**/
2574#define seedDrand01(x) srand48((Rand_seed_t)x) /**/
2575#define RANDBITS 48 /**/
327c3667 2576
327c3667
GS
2577/* SELECT_MIN_BITS:
2578 * This symbol holds the minimum number of bits operated by select.
2579 * That is, if you do select(n, ...), how many bits at least will be
2580 * cleared in the masks if some activity is detected. Usually this
2581 * is either n or 32*ceil(n/32), especially many little-endians do
2582 * the latter. This is only useful if you have select(), naturally.
2583 */
ff935051
JH
2584#define SELECT_MIN_BITS 32 /**/
2585
2586/* Select_fd_set_t:
2587 * This symbol holds the type used for the 2nd, 3rd, and 4th
2588 * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
2589 * is defined, and 'int *' otherwise. This is only useful if you
2590 * have select(), of course.
2591 */
2592#define Select_fd_set_t fd_set * /**/
2593
2594/* SIG_NAME:
2595 * This symbol contains a list of signal names in order of
2596 * signal number. This is intended
2597 * to be used as a static array initialization, like this:
2598 * char *sig_name[] = { SIG_NAME };
2599 * The signals in the list are separated with commas, and each signal
2600 * is surrounded by double quotes. There is no leading SIG in the signal
2601 * name, i.e. SIGQUIT is known as "QUIT".
2602 * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
2603 * etc., where nn is the actual signal number (e.g. NUM37).
2604 * The signal number for sig_name[i] is stored in sig_num[i].
2605 * The last element is 0 to terminate the list with a NULL. This
2606 * corresponds to the 0 at the end of the sig_num list.
2607 */
2608/* SIG_NUM:
2609 * This symbol contains a list of signal numbers, in the same order as the
2610 * SIG_NAME list. It is suitable for static array initialization, as in:
2611 * int sig_num[] = { SIG_NUM };
2612 * The signals in the list are separated with commas, and the indices
2613 * within that list and the SIG_NAME list match, so it's easy to compute
2614 * the signal name from a number or vice versa at the price of a small
2615 * dynamic linear lookup.
2616 * Duplicates are allowed, but are moved to the end of the list.
2617 * The signal number corresponding to sig_name[i] is sig_number[i].
2618 * if (i < NSIG) then sig_number[i] == i.
2619 * The last element is 0, corresponding to the 0 at the end of
2620 * the sig_name list.
2621 */
2622#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "EMT", "FPE", "KILL", "BUS", "SEGV", "SYS", "PIPE", "ALRM", "TERM", "IOINT", "STOP", "TSTP", "CONT", "CHLD", "TTIN", "TTOU", "AIO", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "INFO", "USR1", "USR2", "RESV", "RTMIN", "NUM34", "NUM35", "NUM36", "NUM37", "NUM38", "NUM39", "NUM40", "NUM41", "NUM42", "NUM43", "NUM44", "NUM45", "NUM46", "NUM47", "MAX", "IOT", "LOST", "URG", "CLD", "IO", "POLL", "PTY", "PWR", "RTMAX", 0 /**/
2623#define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 6, 6, 16, 20, 23, 23, 23, 29, 48, 0 /**/
2624
2625/* SITEARCH:
2626 * This symbol contains the name of the private library for this package.
2627 * The library is private in the sense that it needn't be in anyone's
2628 * execution path, but it should be accessible by the world. The program
2629 * should be prepared to do ~ expansion.
2630 * The standard distribution will put nothing in this directory.
2631 * After perl has been installed, users may install their own local
2632 * architecture-dependent modules in this directory with
2633 * MakeMaker Makefile.PL
2634 * or equivalent. See INSTALL for details.
2635 */
2636/* SITEARCH_EXP:
2637 * This symbol contains the ~name expanded version of SITEARCH, to be used
2638 * in programs that are not prepared to deal with ~ expansion at run-time.
2639 */
2640#define SITEARCH "/opt/perl/lib/site_perl/5.5.640/alpha-dec_osf-thread-multi" /**/
2641#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.5.640/alpha-dec_osf-thread-multi" /**/
2642
2643/* SITELIB:
2644 * This symbol contains the name of the private library for this package.
2645 * The library is private in the sense that it needn't be in anyone's
2646 * execution path, but it should be accessible by the world. The program
2647 * should be prepared to do ~ expansion.
2648 * The standard distribution will put nothing in this directory.
2649 * After perl has been installed, users may install their own local
2650 * architecture-independent modules in this directory with
2651 * MakeMaker Makefile.PL
2652 * or equivalent. See INSTALL for details.
2653 */
2654/* SITELIB_EXP:
2655 * This symbol contains the ~name expanded version of SITELIB, to be used
2656 * in programs that are not prepared to deal with ~ expansion at run-time.
2657 */
2658#define SITELIB "/opt/perl/lib/site_perl/5.5.640" /**/
2659#define SITELIB_EXP "/opt/perl/lib/site_perl/5.5.640" /**/
2660
2661/* Size_t:
2662 * This symbol holds the type used to declare length parameters
2663 * for string functions. It is usually size_t, but may be
2664 * unsigned long, int, etc. It may be necessary to include
2665 * <sys/types.h> to get any typedef'ed information.
2666 */
2667#define Size_t size_t /* length paramater for string functions */
2668
2669/* SSize_t:
2670 * This symbol holds the type used by functions that return
2671 * a count of bytes or an error condition. It must be a signed type.
2672 * It is usually ssize_t, but may be long or int, etc.
2673 * It may be necessary to include <sys/types.h> or <unistd.h>
2674 * to get any typedef'ed information.
2675 * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
2676 */
2677#define SSize_t ssize_t /* signed count of bytes */
bfb7748a 2678
fbfd4aab
PP
2679/* STARTPERL:
2680 * This variable contains the string to put in front of a perl
2681 * script to make sure (one hopes) that it runs with perl and not
2682 * some shell.
2683 */
0617aed7 2684#define STARTPERL "#!/opt/perl/bin/perl" /**/
327c3667 2685
a71cd7cd
JH
2686/* HAS_STDIO_STREAM_ARRAY:
2687 * This symbol, if defined, tells that there is an array
2688 * holding the stdio streams.
2689 */
2690/* STDIO_STREAM_ARRAY:
2691 * This symbol tells the name of the array holding the stdio streams.
2692 * Usual values include _iob, __iob, and __sF.
2693 */
ff935051
JH
2694#define HAS_STDIO_STREAM_ARRAY /**/
2695#define STDIO_STREAM_ARRAY _iob
8c09e4ca 2696
ff935051
JH
2697/* Uid_t_f:
2698 * This symbol defines the format string used for printing a Uid_t.
2699 */
2700#define Uid_t_f "u" /**/
2701
2702/* Uid_t_size:
2703 * This symbol holds the size of a Uid_t in bytes.
2704 */
2705#define Uid_t_size 4 /* UID size */
2706
2707/* Uid_t:
2708 * This symbol holds the type used to declare user ids in the kernel.
2709 * It can be int, ushort, uid_t, etc... It may be necessary to include
2710 * <sys/types.h> to get any typedef'ed information.
8c09e4ca 2711 */
ff935051 2712#define Uid_t uid_t /* UID type */
a71cd7cd 2713
327c3667 2714/* USE_64_BITS:
aaacdc8b
GS
2715 * This symbol, if defined, indicates that 64-bit integers should
2716 * be used when available. If not defined, the native integers
327c3667
GS
2717 * will be used (be they 32 or 64 bits).
2718 */
0befd8de 2719#ifndef USE_64_BITS
0617aed7 2720#define USE_64_BITS /**/
0befd8de 2721#endif
4633a7c4 2722
1baac590
JH
2723/* USE_LARGE_FILES:
2724 * This symbol, if defined, indicates that large file support
2725 * should be used when available. The USE_64_BITS symbol will
2726 * also be turned on if necessary.
2727 */
0befd8de 2728#ifndef USE_LARGE_FILES
aaacdc8b 2729#define USE_LARGE_FILES /**/
0befd8de 2730#endif
1baac590 2731
ca24dfc6
LV
2732/* USE_LONG_DOUBLE:
2733 * This symbol, if defined, indicates that long doubles should
2734 * be used when available.
2735 */
0befd8de 2736#ifndef USE_LONG_DOUBLE
ca24dfc6 2737/*#define USE_LONG_DOUBLE / **/
0befd8de
JH
2738#endif
2739
2740/* USE_LONG_LONG:
2741 * This symbol, if defined, indicates that long longs should
2742 * be used when available.
2743 */
2744#ifndef USE_LONG_LONG
ff935051 2745/*#define USE_LONG_LONG / **/
0befd8de
JH
2746#endif
2747
2748#ifndef USE_MORE_BITS
2749/*#define USE_MORE_BITS / **/
2750#endif
ca24dfc6 2751
ff49bff8
JH
2752/* MULTIPLICITY:
2753 * This symbol, if defined, indicates that Perl should
2754 * be built to use multiplicity.
2755 */
0befd8de 2756#ifndef MULTIPLICTY
ff935051 2757#define MULTIPLICITY /**/
0befd8de 2758#endif
ff49bff8 2759
9003a523
PP
2760/* USE_PERLIO:
2761 * This symbol, if defined, indicates that the PerlIO abstraction should
2762 * be used throughout. If not defined, stdio should be
2763 * used in a fully backward compatible manner.
ce4a058e 2764 */
0befd8de 2765#ifndef USE_PERLIO
20e68413 2766/*#define USE_PERLIO / **/
0befd8de 2767#endif
ce4a058e 2768
29209bc5
JH
2769/* USE_SOCKS:
2770 * This symbol, if defined, indicates that Perl should
2771 * be built to use socks.
2772 */
0befd8de 2773#ifndef USE_SOCKS
11dc3f68 2774/*#define USE_SOCKS / **/
0befd8de 2775#endif
29209bc5 2776
aaacdc8b
GS
2777/* USE_ITHREADS:
2778 * This symbol, if defined, indicates that Perl should be built to
2779 * use the interpreter-based threading implementation.
2780 */
2781/* USE_5005THREADS:
2782 * This symbol, if defined, indicates that Perl should be built to
2783 * use the 5.005-based threading implementation.
dfe9444c 2784 */
693762b4
AD
2785/* OLD_PTHREADS_API:
2786 * This symbol, if defined, indicates that Perl should
2787 * be built to use the old draft POSIX threads API.
2788 */
aaacdc8b
GS
2789/*#define USE_5005THREADS / **/
2790#define USE_ITHREADS /**/
2791#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
2792#define USE_THREADS /* until src is revised*/
0befd8de 2793#endif
11dc3f68 2794/*#define OLD_PTHREADS_API / **/
16d20bd9 2795
ff935051
JH
2796/* PERL_VENDORLIB_EXP:
2797 * This symbol contains the ~name expanded version of VENDORLIB, to be used
2798 * in programs that are not prepared to deal with ~ expansion at run-time.
887d2938 2799 */
ff935051 2800/*#define PERL_VENDORLIB_EXP "" / **/
887d2938 2801
ff935051
JH
2802/* VOIDFLAGS:
2803 * This symbol indicates how much support of the void type is given by this
2804 * compiler. What various bits mean:
2805 *
2806 * 1 = supports declaration of void
2807 * 2 = supports arrays of pointers to functions returning void
2808 * 4 = supports comparisons between pointers to void functions and
2809 * addresses of void functions
2810 * 8 = suports declaration of generic void pointers
2811 *
2812 * The package designer should define VOIDUSED to indicate the requirements
2813 * of the package. This can be done either by #defining VOIDUSED before
2814 * including config.h, or by defining defvoidused in Myinit.U. If the
2815 * latter approach is taken, only those flags will be tested. If the
2816 * level of void support necessary is not present, defines void to int.
dc45a647 2817 */
ff935051
JH
2818#ifndef VOIDUSED
2819#define VOIDUSED 15
2820#endif
2821#define VOIDFLAGS 15
2822#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
2823#define void int /* is void to be avoided? */
2824#define M_VOID /* Xenix strikes again */
2825#endif
dc45a647 2826
fe14fcc3 2827#endif