This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
update GNUmakefile for Test2 too
[perl5.git] / win32 / GNUmakefile
CommitLineData
342634f3 1#
b6e5775f
DD
2# Makefile to build perl on Windows using GMAKE.
3# Supported compilers:
4# Microsoft Visual C++ 6.0 or later
5# MinGW with gcc-3.4.5 or later
6# Windows SDK 64-bit compiler and tools
342634f3 7#
8# This is set up to build a perl.exe that runs off a shared library
c02894f5 9# (perl525.dll). Also makes individual DLLs for the XS extensions.
342634f3 10#
11# The easiest way to customize the build process is to use parameters like this:
12#
13# c:\dev\perlsrc\win32> gmake INST_TOP=c:\sw\perl CCHOME=c:\sw\mingw USE_64_BIT_INT=define
14
15
16##
17## Make sure you read README.win32 *before* you mess with anything here!
18##
19
20#
21# We set this to point to cmd.exe in case GNU Make finds sh.exe in the path.
22# Comment this line out if necessary
23#
24SHELL := cmd.exe
25
26# define whether you want to use native gcc compiler or cross-compiler
27# possible values: gcc
28# i686-w64-mingw32-gcc
29# x86_64-w64-mingw32-gcc
30GCCBIN := gcc
31
32ifeq ($(GCCBIN),x86_64-w64-mingw32-gcc)
33GCCCROSS := x86_64-w64-mingw32
34endif
35ifeq ($(GCCBIN),i686-w64-mingw32-gcc)
36GCCCROSS := i686-w64-mingw32
37endif
38
39GCCTARGET := $(shell $(GCCBIN) -dumpmachine)
40GCCVER1 := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%i)
41GCCVER2 := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%j)
42GCCVER3 := $(shell for /f "delims=. tokens=1,2,3" %%i in ('gcc -dumpversion') do echo %%k)
43
342634f3 44##
45## Build configuration. Edit the values below to suit your needs.
46##
47
48#
49# Set these to wherever you want "gmake install" to put your
50# newly built perl.
51#
52INST_DRV := c:
53INST_TOP := $(INST_DRV)\perl
54
55#
b6e5775f
DD
56# Uncomment if you want to build a 32-bit Perl using a 32-bit compiler
57# on a 64-bit version of Windows.
58#
59#WIN64 := undef
60
61#
342634f3 62# Comment this out if you DON'T want your perl installation to be versioned.
63# This means that the new installation will overwrite any files from the
64# old installation at the same INST_TOP location. Leaving it enabled is
65# the safest route, as perl adds the extra version directory to all the
66# locations it installs files to. If you disable it, an alternative
67# versioned installation can be obtained by setting INST_TOP above to a
68# path that includes an arbitrary version string.
69#
2bd5e579 70#INST_VER := \5.25.1
342634f3 71
72#
73# Comment this out if you DON'T want your perl installation to have
74# architecture specific components. This means that architecture-
75# specific files will be installed along with the architecture-neutral
76# files. Leaving it enabled is safer and more flexible, in case you
77# want to build multiple flavors of perl and install them together in
78# the same location. Commenting it out gives you a simpler
79# installation that is easier to understand for beginners.
80#
81#INST_ARCH := \$(ARCHNAME)
82
83#
84# Uncomment this if you want perl to run
85# $Config{sitelibexp}\sitecustomize.pl
86# before anything else. This script can then be set up, for example,
87# to add additional entries to @INC.
88#
89#USE_SITECUST := define
90
91#
92# uncomment to enable multiple interpreters. This is needed for fork()
93# emulation and for thread support, and is auto-enabled by USE_IMP_SYS
94# and USE_ITHREADS below.
95#
96USE_MULTI := define
97
98#
99# Interpreter cloning/threads; now reasonably complete.
100# This should be enabled to get the fork() emulation. This needs (and
101# will auto-enable) USE_MULTI above.
102#
103USE_ITHREADS := define
104
105#
106# uncomment to enable the implicit "host" layer for all system calls
107# made by perl. This is also needed to get fork(). This needs (and
108# will auto-enable) USE_MULTI above.
109#
110USE_IMP_SYS := define
111
112#
113# Comment out next assign to disable perl's I/O subsystem and use compiler's
114# stdio for IO - depending on your compiler vendor and run time library you may
115# then get a number of fails from make test i.e. bugs - complain to them not us ;-).
116# You will also be unable to take full advantage of perl5.8's support for multiple
117# encodings and may see lower IO performance. You have been warned.
118#
119USE_PERLIO := define
120
121#
122# Comment this out if you don't want to enable large file support for
123# some reason. Should normally only be changed to maintain compatibility
124# with an older release of perl.
125#
126USE_LARGE_FILES := define
127
128#
129# Uncomment this if you're building a 32-bit perl and want 64-bit integers.
130# (If you're building a 64-bit perl then you will have 64-bit integers whether
131# or not this is uncommented.)
132# Note: This option is not supported in 32-bit MSVC60 builds.
133#
134#USE_64_BIT_INT := define
135
136#
b6e5775f
DD
137# Uncomment this if you want to support the use of long doubles in GCC builds.
138# This option is not supported for MSVC builds.
342634f3 139#
140#USE_LONG_DOUBLE :=define
141
142#
bf543eaf
DD
143# Uncomment this if you want to disable looking up values from
144# HKEY_CURRENT_USER\Software\Perl and HKEY_LOCAL_MACHINE\Software\Perl in
145# the Registry.
146#
147#USE_NO_REGISTRY := define
148
149#
b6e5775f
DD
150# uncomment exactly one of the following
151#
152# Visual C++ 6.0 (aka Visual C++ 98)
153#CCTYPE := MSVC60
154# Visual C++ .NET 2002/2003 (aka Visual C++ 7.0/7.1) (full version)
155#CCTYPE := MSVC70
156# Visual C++ Toolkit 2003 (aka Visual C++ 7.1) (free command-line tools)
157#CCTYPE := MSVC70FREE
158# Windows Server 2003 SP1 Platform SDK (April 2005)
159#CCTYPE := SDK2003SP1
160# Visual C++ 2005 (aka Visual C++ 8.0) (full version)
161#CCTYPE := MSVC80
162# Visual C++ 2005 Express Edition (aka Visual C++ 8.0) (free version)
163#CCTYPE := MSVC80FREE
164# Visual C++ 2008 (aka Visual C++ 9.0) (full version)
165#CCTYPE := MSVC90
166# Visual C++ 2008 Express Edition (aka Visual C++ 9.0) (free version)
167#CCTYPE := MSVC90FREE
168# Visual C++ 2010 (aka Visual C++ 10.0) (full version)
169#CCTYPE := MSVC100
170# Visual C++ 2010 Express Edition (aka Visual C++ 10.0) (free version)
171#CCTYPE := MSVC100FREE
172# Visual C++ 2012 (aka Visual C++ 11.0) (full version)
173#CCTYPE := MSVC110
174# Visual C++ 2012 Express Edition (aka Visual C++ 11.0) (free version)
175#CCTYPE := MSVC110FREE
176# Visual C++ 2013 (aka Visual C++ 12.0) (full version)
177#CCTYPE := MSVC120
178# Visual C++ 2013 Express Edition (aka Visual C++ 12.0) (free version)
179#CCTYPE := MSVC120FREE
180# MinGW or mingw-w64 with gcc-3.4.5 or later
181CCTYPE := GCC
182
183#
184# If you are using Intel C++ Compiler uncomment this
185#
186#__ICC := define
187
188#
bf543eaf 189# uncomment next line if you want debug version of perl (big/slow)
342634f3 190# If not enabled, we automatically try to use maximum optimization
191# with all compilers that are known to have a working optimizer.
192#
193#CFG := Debug
194
195#
196# uncomment to enable linking with setargv.obj under the Visual C
197# compiler. Setting this options enables perl to expand wildcards in
198# arguments, but it may be harder to use alternate methods like
199# File::DosGlob that are more powerful. This option is supported only with
200# Visual C.
201#
202#USE_SETARGV := define
203
204#
205# set this if you wish to use perl's malloc
206# WARNING: Turning this on/off WILL break binary compatibility with extensions
207# you may have compiled with/without it. Be prepared to recompile all
208# extensions if you change the default. Currently, this cannot be enabled
209# if you ask for USE_IMP_SYS above.
210#
211#PERL_MALLOC := define
212
213#
214# set this to enable debugging mstats
215# This must be enabled to use the Devel::Peek::mstat() function. This cannot
216# be enabled without PERL_MALLOC as well.
217#
218#DEBUG_MSTATS := define
219
220#
221# set this to additionally provide a statically linked perl-static.exe.
222# Note that dynamic loading will not work with this perl, so you must
223# include required modules statically using the STATIC_EXT or ALL_STATIC
c02894f5 224# variables below. A static library perl525s.lib will also be created.
342634f3 225# Ordinary perl.exe is not affected by this option.
226#
227#BUILD_STATIC := define
228
229#
230# in addition to BUILD_STATIC the option ALL_STATIC makes *every*
231# extension get statically built
232# This will result in a very large perl executable, but the main purpose
233# is to have proper linking set so as to be able to create miscellaneous
234# executables with different built-in extensions
235#
236#ALL_STATIC := define
237
238#
239# set the install locations of the compiler include/libraries
240# Running VCVARS32.BAT is *required* when using Visual C.
241# Some versions of Visual C don't define MSVCDIR in the environment,
242# so you may have to set CCHOME explicitly (spaces in the path name should
243# not be quoted)
244#
b6e5775f 245ifeq ($(CCTYPE),GCC)
342634f3 246CCHOME := C:\MinGW
b6e5775f
DD
247else
248CCHOME := $(MSVCDIR)
249endif
342634f3 250
251#
252# Following sets $Config{incpath} and $Config{libpth}
253#
254
255ifneq ($(GCCCROSS),)
256CCINCDIR := $(CCHOME)\$(GCCCROSS)\include
257CCLIBDIR := $(CCHOME)\$(GCCCROSS)\lib
258CCDLLDIR := $(CCLIBDIR)
259ARCHPREFIX := $(GCCCROSS)-
260else
261CCINCDIR := $(CCHOME)\include
262CCLIBDIR := $(CCHOME)\lib
263CCDLLDIR := $(CCHOME)\bin
264ARCHPREFIX :=
265endif
266
267#
268# Additional compiler flags can be specified here.
269#
270BUILDOPT := $(BUILDOPTEXTRA)
271
272#
273# This should normally be disabled. Enabling it will disable the File::Glob
274# implementation of CORE::glob.
275#
276#BUILDOPT += -DPERL_EXTERNAL_GLOB
277
278#
279# Perl needs to read scripts in text mode so that the DATA filehandle
280# works correctly with seek() and tell(), or around auto-flushes of
281# all filehandles (e.g. by system(), backticks, fork(), etc).
282#
283# The current version on the ByteLoader module on CPAN however only
284# works if scripts are read in binary mode. But before you disable text
285# mode script reading (and break some DATA filehandle functionality)
286# please check first if an updated ByteLoader isn't available on CPAN.
287#
288BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
289
290#
291# specify semicolon-separated list of extra directories that modules will
292# look for libraries (spaces in path names need not be quoted)
293#
294EXTRALIBDIRS :=
295
296#
297# set this to your email address (perl will guess a value from
298# from your loginname and your hostname, which may not be right)
299#
300#EMAIL :=
301
302##
303## Build configuration ends.
304##
305
306##################### CHANGE THESE ONLY IF YOU MUST #####################
307
308PERL_MALLOC ?= undef
309DEBUG_MSTATS ?= undef
310
311USE_SITECUST ?= undef
312USE_MULTI ?= undef
313USE_ITHREADS ?= undef
314USE_IMP_SYS ?= undef
315USE_PERLIO ?= undef
316USE_LARGE_FILES ?= undef
317USE_64_BIT_INT ?= undef
318USE_LONG_DOUBLE ?= undef
bf543eaf 319USE_NO_REGISTRY ?= undef
342634f3 320
321ifeq ($(USE_IMP_SYS),define)
322PERL_MALLOC = undef
323endif
324
325ifeq ($(PERL_MALLOC),undef)
326DEBUG_MSTATS = undef
327endif
328
329ifeq ($(DEBUG_MSTATS),define)
330BUILDOPT += -DPERL_DEBUGGING_MSTATS
331endif
332
333ifeq ("$(USE_IMP_SYS) $(USE_MULTI)","define undef")
334USE_MULTI = define
335endif
336
337ifeq ("$(USE_ITHREADS) $(USE_MULTI)","define undef")
338USE_MULTI = define
339endif
340
341ifeq ($(USE_SITECUST),define)
342BUILDOPT += -DUSE_SITECUSTOMIZE
343endif
344
345ifneq ($(USE_MULTI),undef)
346BUILDOPT += -DPERL_IMPLICIT_CONTEXT
347endif
348
349ifneq ($(USE_IMP_SYS),undef)
350BUILDOPT += -DPERL_IMPLICIT_SYS
351endif
352
bf543eaf
DD
353ifeq ($(USE_NO_REGISTRY),define)
354BUILDOPT += -DWIN32_NO_REGISTRY
355endif
356
745dedb9
DD
357ifeq ($(CCTYPE),GCC)
358ifeq ($(GCCTARGET),x86_64-w64-mingw32)
359WIN64 := define
ae146f54 360PROCESSOR_ARCHITECTURE := x64
745dedb9
DD
361endif
362ifeq ($(GCCTARGET),i686-w64-mingw32)
363WIN64 := undef
ae146f54 364PROCESSOR_ARCHITECTURE := x86
745dedb9
DD
365endif
366endif
367
b6e5775f
DD
368PROCESSOR_ARCHITECTURE ?= x86
369
370ifeq ($(WIN64),undef)
371PROCESSOR_ARCHITECTURE = x86
372endif
373
374ifeq ($(WIN64),)
375# When we are running from a 32bit cmd.exe on AMD64 then
376# PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
377# is set to AMD64
378ifneq ($(PROCESSOR_ARCHITEW6432),)
379PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
380WIN64 = define
381else ifeq ($(PROCESSOR_ARCHITECTURE),AMD64)
382WIN64 = define
383else ifeq ($(PROCESSOR_ARCHITECTURE),IA64)
384WIN64 = define
385else
386WIN64 = undef
387endif
388endif
389
342634f3 390ifeq ($(WIN64),define)
391USE_64_BIT_INT = define
392endif
393
b6e5775f
DD
394# Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because
395# both link against MSVCRT.dll (which is part of Windows itself) and
396# not against a compiler specific versioned runtime.
397ifeq ("$(WIN64) $(CCTYPE)","define MSVC60")
398CCTYPE = SDK2003SP1
399endif
400
401# Disable the 64-bit-int option for (32-bit) MSVC60 builds since that compiler
402# does not support it.
403ifeq ($(CCTYPE),MSVC60)
404USE_64_BIT_INT = undef
405endif
406
407# Disable the long double option for MSVC builds since that compiler
408# does not support it.
409ifneq ($(CCTYPE),GCC)
410USE_LONG_DOUBLE = undef
411endif
412
413ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
414ifeq ($(ARCHITECTURE),AMD64)
415ARCHITECTURE = x64
416endif
417ifeq ($(ARCHITECTURE),IA64)
418ARCHITECTURE = ia64
419endif
420
342634f3 421ifeq ($(USE_MULTI),define)
422ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
423else
424ifeq ($(USE_PERLIO),define)
425ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
426else
427ARCHNAME = MSWin32-$(ARCHITECTURE)
428endif
429endif
430
431ifeq ($(USE_PERLIO),define)
432BUILDOPT += -DUSE_PERLIO
433endif
434
435ifeq ($(USE_ITHREADS),define)
436ARCHNAME := $(ARCHNAME)-thread
437endif
438
439ifneq ($(WIN64),define)
440ifeq ($(USE_64_BIT_INT),define)
441ARCHNAME := $(ARCHNAME)-64int
442endif
443endif
444
445ifeq ($(USE_LONG_DOUBLE),define)
446ARCHNAME := $(ARCHNAME)-ld
447endif
448
449ARCHDIR = ..\lib\$(ARCHNAME)
450COREDIR = ..\lib\CORE
451AUTODIR = ..\lib\auto
452LIBDIR = ..\lib
453EXTDIR = ..\ext
454DISTDIR = ..\dist
455CPANDIR = ..\cpan
456PODDIR = ..\pod
457HTMLDIR = .\html
458
459#
460INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
461INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
462INST_LIB = $(INST_TOP)$(INST_VER)\lib
463INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
464INST_COREDIR = $(INST_ARCHLIB)\CORE
465INST_HTML = $(INST_TOP)$(INST_VER)\html
466
467#
468# Programs to compile, build .lib files and link
469#
470
471MINIBUILDOPT :=
472
b6e5775f
DD
473ifeq ($(CCTYPE),GCC)
474
342634f3 475CC = $(ARCHPREFIX)gcc
476LINK32 = $(ARCHPREFIX)g++
477LIB32 = $(ARCHPREFIX)ar rc
478IMPLIB = $(ARCHPREFIX)dlltool
479RSC = $(ARCHPREFIX)windres
480
481ifeq ($(USE_LONG_DOUBLE),define)
482BUILDOPT += -D__USE_MINGW_ANSI_STDIO
483MINIBUILDOPT += -D__USE_MINGW_ANSI_STDIO
484endif
485
486# If you are using GCC, 4.3 or later by default we add the -fwrapv option.
487# See https://rt.perl.org/Ticket/Display.html?id=121505
488#
489GCCWRAPV := $(shell if "$(GCCVER1)"=="4" (if "$(GCCVER2)" geq "3" echo define) else if "$(GCCVER1)" geq "5" (echo define))
490
491ifeq ($(GCCWRAPV),define)
492BUILDOPT += -fwrapv
493MINIBUILDOPT += -fwrapv
494endif
495
496i = .i
497o = .o
498a = .a
499
500#
501# Options
502#
503
bf543eaf 504INCLUDES = -I.\include -I. -I..
342634f3 505DEFINES = -DWIN32
506ifeq ($(WIN64),define)
507DEFINES += -DWIN64 -DCONSERVATIVE
508endif
509LOCDEFS = -DPERLDLL -DPERL_CORE
342634f3 510CXX_FLAG = -xc++
511LIBC =
bf543eaf
DD
512LIBFILES = $(LIBC) -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool \
513 -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 \
514 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
342634f3 515
516ifeq ($(CFG),Debug)
517OPTIMIZE = -g -O2 -DDEBUGGING
518LINK_DBG = -g
519else
520OPTIMIZE = -s -O2
521LINK_DBG = -s
522endif
523
524EXTRACFLAGS =
525CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
526LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
527OBJOUT_FLAG = -o
528EXEOUT_FLAG = -o
529LIBOUT_FLAG =
bf543eaf 530PDBOUT =
342634f3 531
532BUILDOPT += -fno-strict-aliasing -mms-bitfields
16d5aac1 533MINIBUILDOPT += -fno-strict-aliasing
b6e5775f
DD
534
535TESTPREPGCC = test-prep-gcc
536
537else
538
539o = .obj
540
541# All but the free version of VC++ 7.1 can load DLLs on demand. Makes the test
542# suite run in about 10% less time.
543ifneq ($(CCTYPE),MSVC70FREE)
544# If no registry, advapi32 is only used for Perl_pp_getlogin/getlogin/GetUserNameA
545# which is rare to execute
546ifneq ($(USE_NO_REGISTRY),undef)
547DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:advapi32.dll delayimp.lib
548MINIDELAYLOAD =
549else
550DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib
551#miniperl never does any registry lookups
552MINIDELAYLOAD = -DELAYLOAD:advapi32.dll
553endif
554endif
555
556# Visual C++ 2005 and 2008 (VC++ 8.0 and 9.0) create manifest files for EXEs and
557# DLLs. These either need copying everywhere with the binaries, or else need
558# embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
559# simplicity, embed them if they exist (and delete them afterwards so that they
560# don't get installed too).
561EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
562 if exist $@.manifest del $@.manifest
563EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
564 if exist $@.manifest del $@.manifest
565
566# Most relevant compiler-specific options fall into two groups:
567# either pre-MSVC80 or MSVC80 onwards, so define a macro for this.
568ifeq ($(CCTYPE),MSVC60)
569PREMSVC80 = define
570else ifeq ($(CCTYPE),MSVC70)
571PREMSVC80 = define
572else ifeq ($(CCTYPE),MSVC70FREE)
573PREMSVC80 = define
574else
575PREMSVC80 = undef
576endif
577
578ifneq ($(__ICC),define)
579CC = cl
580LINK32 = link
581else
582CC = icl
583LINK32 = xilink
584endif
585LIB32 = $(LINK32) -lib
586RSC = rc
587
588#
589# Options
590#
591
592INCLUDES = -I.\include -I. -I..
593#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
594DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT
595LOCDEFS = -DPERLDLL -DPERL_CORE
596CXX_FLAG = -TP -EHsc
597
598LIBC = msvcrt.lib
599
600ifeq ($(CFG),Debug)
601OPTIMIZE = -Od -MD -Zi -DDEBUGGING
602LINK_DBG = -debug
603else ifeq ($(CFG),DebugSymbols)
604OPTIMIZE = -Od -MD -Zi
605LINK_DBG = -debug
606else ifeq ($(CFG),DebugFull)
607LIBC = msvcrtd.lib
608OPTIMIZE = -Od -MDd -Zi -D_DEBUG -DDEBUGGING
609LINK_DBG = -debug
610else
611# -O1 yields smaller code, which turns out to be faster than -O2 on x86 and x64
612OPTIMIZE = -O1 -MD -Zi -DNDEBUG
613# we enable debug symbols in release builds also
614LINK_DBG = -debug -opt:ref,icf
615# you may want to enable this if you want COFF symbols in the executables
616# in addition to the PDB symbols. The default Dr. Watson that ships with
617# Windows can use the the former but not latter. The free WinDbg can be
618# installed to get better stack traces from just the PDB symbols, so we
619# avoid the bloat of COFF symbols by default.
620#LINK_DBG = $(LINK_DBG) -debugtype:both
621ifneq ($(CCTYPE),MSVC60)
622# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
623OPTIMIZE += -GL
624LINK_DBG += -ltcg
625LIB_FLAGS = -ltcg
626endif
627endif
628
629ifeq ($(WIN64),define)
630DEFINES += -DWIN64 -DCONSERVATIVE
631OPTIMIZE += -fp:precise
632endif
633
634# For now, silence warnings from VC++ 8.0 onwards about "unsafe" CRT functions
635# and POSIX CRT function names being deprecated.
636ifeq ($(PREMSVC80),undef)
637DEFINES += -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
638endif
639
640# In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to
641# 64-bit, even in 32-bit mode. It also provides the _USE_32BIT_TIME_T
642# preprocessor option to revert back to the old functionality for
643# backward compatibility. We define this symbol here for older 32-bit
644# compilers only (which aren't using it at all) for the sole purpose
645# of getting it into $Config{ccflags}. That way if someone builds
646# Perl itself with e.g. VC6 but later installs an XS module using VC8
647# the time_t types will still be compatible.
648ifeq ($(WIN64),undef)
649ifeq ((PREMSVC80),define)
650BUILDOPT += -D_USE_32BIT_TIME_T
651endif
652endif
653
654LIBBASEFILES = oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
655 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
656 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib \
657 odbc32.lib odbccp32.lib comctl32.lib
658
659# Avoid __intel_new_proc_init link error for libircmt.
660# libmmd is /MD equivelent, other variants exist.
661# libmmd is Intel C's math addon funcs to MS CRT, contains long doubles, C99,
662# and optimized C89 funcs
663ifeq ($(__ICC),define)
664LIBBASEFILES += libircmt.lib libmmd.lib
665endif
666
667# The 64 bit Windows Server 2003 SP1 SDK compilers link against MSVCRT.dll, which
668# doesn't include the buffer overrun verification code used by the /GS switch.
669# Since the code links against libraries that are compiled with /GS, this
670# "security cookie verification" code must be included via bufferoverflow.lib.
671ifeq ("$(WIN64) $(CCTYPE)","define SDK2003SP1")
672LIBBASEFILES += bufferoverflowU.lib
673endif
674
675LIBFILES = $(LIBBASEFILES) $(LIBC)
676
677EXTRACFLAGS = -nologo -GF -W3
678ifeq ($(__ICC),define)
679EXTRACFLAGS += -Qstd=c99
680endif
681ifeq ($(USE_CPLUSPLUS),define)
682EXTRACFLAGS += $(CXX_FLAG)
683endif
684CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
685 $(PCHFLAGS) $(OPTIMIZE)
686LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
687 -libpath:"$(INST_COREDIR)" \
688 -machine:$(PROCESSOR_ARCHITECTURE)
689LIB_FLAGS += -nologo
690OBJOUT_FLAG = -Fo
691EXEOUT_FLAG = -Fe
692LIBOUT_FLAG = /out:
693PDBOUT = -Fd$(*).pdb
694TESTPREPGCC =
695
696endif
697
342634f3 698CFLAGS_O = $(CFLAGS) $(BUILDOPT)
699
b6e5775f 700ifeq ($(PREMSVC80),undef)
67c6176d 701PRIV_LINK_FLAGS += "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'"
b6e5775f
DD
702else
703RSC_FLAGS = -DINCLUDE_MANIFEST
704endif
705
706
707# For XP support in >= VS 2013 (VC++ 12.0), subsystem is always in Config.pm
708# LINK_FLAGS else subsystem is only needed for EXE building, not XS DLL building
709# Console vs GUI makes no difference for DLLs, so use default for cleaner
710# building cmd lines
711
712ifeq ($(CCTYPE),MSVC120)
713ifeq ($(WIN64),define)
714LINK_FLAGS += -subsystem:console,"5.02"
715else
716LINK_FLAGS += -subsystem:console,"5.01"
717endif
718
719else ifeq ($(CCTYPE),MSVC120FREE)
720ifeq ($(WIN64),define)
721LINK_FLAGS += -subsystem:console,"5.02"
722else
723LINK_FLAGS += -subsystem:console,"5.01"
724endif
725
726else ifeq ($(CCTYPE),MSVC140)
727ifeq ($(WIN64),define)
728LINK_FLAGS += -subsystem:console,"5.02"
729else
730LINK_FLAGS += -subsystem:console,"5.01"
731endif
732
733else ifeq ($(CCTYPE),MSVC140FREE)
734ifeq ($(WIN64),define)
735LINK_FLAGS += -subsystem:console,"5.02"
736else
737LINK_FLAGS += -subsystem:console,"5.01"
738endif
739
740else ifneq ($(CCTYPE),GCC)
741PRIV_LINK_FLAGS += -subsystem:console
742endif
743
342634f3 744BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
745
746#################### do not edit below this line #######################
747############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
748
bf543eaf
DD
749#prevent -j from reaching EUMM/make_ext.pl/"sub makes", Win32 EUMM not parallel
750#compatible yet
751unexport MAKEFLAGS
752
b6e5775f
DD
753a ?= .lib
754
755.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
756
342634f3 757%$(o): %.c
b6e5775f 758 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $(PDBOUT) $<
342634f3 759
760%.i: %.c
761 $(CC) -c -I$(<D) $(CFLAGS_O) -E $< >$@
762
763%.c: %.y
764 $(NOOP)
765
766%.dll: %$(o)
767 $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
768 $(IMPLIB) --input-def $(*F).def --output-lib $(*F).a $@
769
770%.res: %.rc
b6e5775f 771ifeq ($(CCTYPE),GCC)
342634f3 772 $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -D INCLUDE_MANIFEST -i $< -o $@
b6e5775f
DD
773else
774 $(RSC) -i.. -DINCLUDE_MANIFEST $<
775endif
342634f3 776
777#
778# various targets
bf543eaf
DD
779
780#do not put $(MINIPERL) as a dep/prereq in a rule, instead put $(HAVEMINIPERL)
781#$(MINIPERL) is not a buildable target, use "gmake mp" if you want to just build
782#miniperl alone
342634f3 783MINIPERL = ..\miniperl.exe
bf543eaf 784HAVEMINIPERL = ..\lib\buildcustomize.pl
342634f3 785MINIDIR = mini
786PERLEXE = ..\perl.exe
787WPERLEXE = ..\wperl.exe
788PERLEXESTATIC = ..\perl-static.exe
789STATICDIR = .\static.tmp
790GLOBEXE = ..\perlglob.exe
bf543eaf 791CONFIGPM = ..\lib\Config.pm
342634f3 792GENUUDMAP = ..\generate_uudmap.exe
793ifeq ($(BUILD_STATIC),define)
794PERLSTATIC = static
795else
796ifeq ($(ALL_STATIC),define)
797PERLSTATIC = static
798else
799PERLSTATIC =
800endif
801endif
802
803# Unicode data files generated by mktables
804UNIDATAFILES = ..\lib\unicore\Decomposition.pl ..\lib\unicore\TestProp.pl \
805 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
806 ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm \
807 ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst
808
809# Directories of Unicode data files generated by mktables
810UNIDATADIR1 = ..\lib\unicore\To
811UNIDATADIR2 = ..\lib\unicore\lib
812
813PERLEXE_MANIFEST= .\perlexe.manifest
814PERLEXE_ICO = .\perlexe.ico
815PERLEXE_RES = .\perlexe.res
816PERLDLL_RES =
817
818# Nominate a target which causes extensions to be re-built
819# This used to be $(PERLEXE), but at worst it is the .dll that they depend
820# on and really only the interface - i.e. the .def file used to export symbols
821# from the .dll
bf543eaf 822PERLDEP = $(PERLIMPLIB)
342634f3 823
824
825PL2BAT = bin\pl2bat.pl
826
827UTILS = \
828 ..\utils\h2ph \
829 ..\utils\splain \
830 ..\utils\perlbug \
831 ..\utils\pl2pm \
832 ..\utils\c2ph \
833 ..\utils\pstruct \
834 ..\utils\h2xs \
835 ..\utils\perldoc \
836 ..\utils\perlivp \
837 ..\utils\libnetcfg \
838 ..\utils\enc2xs \
bf543eaf 839 ..\utils\encguess \
342634f3 840 ..\utils\piconv \
841 ..\utils\corelist \
842 ..\utils\cpan \
843 ..\utils\xsubpp \
844 ..\utils\pod2html \
845 ..\utils\prove \
846 ..\utils\ptar \
847 ..\utils\ptardiff \
848 ..\utils\ptargrep \
849 ..\utils\zipdetails \
850 ..\utils\shasum \
851 ..\utils\instmodsh \
852 ..\utils\json_pp \
853 bin\exetype.pl \
854 bin\runperl.pl \
855 bin\pl2bat.pl \
856 bin\perlglob.pl \
857 bin\search.pl
858
b6e5775f
DD
859ifeq ($(CCTYPE),GCC)
860
342634f3 861CFGSH_TMPL = config.gc
862CFGH_TMPL = config_H.gc
c02894f5
RS
863PERLIMPLIB = $(COREDIR)\libperl525$(a)
864PERLIMPLIBBASE = libperl525$(a)
865PERLSTATICLIB = ..\libperl525s$(a)
342634f3 866INT64 = long long
867
b6e5775f
DD
868else
869
870CFGSH_TMPL = config.vc
871CFGH_TMPL = config_H.vc
872INT64 = __int64
873
874endif
875
342634f3 876# makedef.pl must be updated if this changes, and this should normally
877# only change when there is an incompatible revision of the public API.
c02894f5
RS
878PERLIMPLIB ?= $(COREDIR)\perl525$(a)
879PERLIMPLIBBASE ?= perl525$(a)
880PERLEXPLIB ?= $(COREDIR)\perl525.exp
881PERLSTATICLIB ?= ..\perl525s$(a)
882PERLDLL = ..\perl525.dll
342634f3 883
bf543eaf
DD
884# don't let "gmake -n all" try to run "miniperl.exe make_ext.pl"
885PLMAKE = gmake
886
342634f3 887XCOPY = xcopy /f /r /i /d /y
888RCOPY = xcopy /f /r /i /e /d /y
889NOOP = @rem
890
bf543eaf
DD
891#first ones are arrange in compile time order for faster parallel building
892#see #123867 for details
342634f3 893MICROCORE_SRC = \
bf543eaf
DD
894 ..\toke.c \
895 ..\regcomp.c \
896 ..\regexec.c \
897 ..\op.c \
898 ..\sv.c \
899 ..\pp.c \
900 ..\pp_ctl.c \
901 ..\pp_sys.c \
902 ..\pp_pack.c \
903 ..\pp_hot.c \
904 ..\gv.c \
905 ..\perl.c \
906 ..\utf8.c \
907 ..\dump.c \
908 ..\hv.c \
342634f3 909 ..\av.c \
910 ..\caretx.c \
911 ..\deb.c \
912 ..\doio.c \
913 ..\doop.c \
a55c5245 914 ..\dquote.c \
342634f3 915 ..\globals.c \
16d5aac1 916 ..\mro_core.c \
342634f3 917 ..\locale.c \
918 ..\keywords.c \
919 ..\mathoms.c \
920 ..\mg.c \
921 ..\numeric.c \
342634f3 922 ..\pad.c \
342634f3 923 ..\perlapi.c \
924 ..\perly.c \
342634f3 925 ..\pp_sort.c \
342634f3 926 ..\reentr.c \
342634f3 927 ..\run.c \
928 ..\scope.c \
342634f3 929 ..\taint.c \
f832b29a 930 ..\time64.c \
342634f3 931 ..\universal.c \
342634f3 932 ..\util.c
933
934EXTRACORE_SRC += perllib.c
935
936ifeq ($(PERL_MALLOC),define)
937EXTRACORE_SRC += ..\malloc.c
938endif
939
940EXTRACORE_SRC += ..\perlio.c
941
942WIN32_SRC = \
943 .\win32.c \
944 .\win32sck.c \
945 .\win32thread.c \
946 .\fcrypt.c
947
948# We need this for miniperl build unless we override canned
949# config.h #define building mini\*
950#ifeq ($(USE_PERLIO)" == "define"
951WIN32_SRC += .\win32io.c
952#endif
953
954CORE_NOCFG_H = \
955 ..\av.h \
956 ..\cop.h \
957 ..\cv.h \
958 ..\dosish.h \
959 ..\embed.h \
960 ..\form.h \
961 ..\gv.h \
962 ..\handy.h \
963 ..\hv.h \
964 ..\hv_func.h \
965 ..\iperlsys.h \
966 ..\mg.h \
967 ..\nostdio.h \
968 ..\op.h \
969 ..\opcode.h \
970 ..\perl.h \
971 ..\perlapi.h \
972 ..\perlsdio.h \
973 ..\perly.h \
974 ..\pp.h \
975 ..\proto.h \
976 ..\regcomp.h \
977 ..\regexp.h \
978 ..\scope.h \
979 ..\sv.h \
980 ..\thread.h \
981 ..\unixish.h \
982 ..\utf8.h \
983 ..\util.h \
984 ..\warnings.h \
985 ..\XSUB.h \
986 ..\EXTERN.h \
987 ..\perlvars.h \
988 ..\intrpvar.h \
989 .\include\dirent.h \
990 .\include\netdb.h \
991 .\include\sys\errno2.h \
992 .\include\sys\socket.h \
993 .\win32.h
994
995CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
996
997UUDMAP_H = ..\uudmap.h
998BITCOUNT_H = ..\bitcount.h
999MG_DATA_H = ..\mg_data.h
1000GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H)
bf543eaf
DD
1001#a stub ppport.h must be generated so building XS modules, .c->.obj wise, will
1002#work, so this target also represents creating the COREDIR and filling it
1003HAVE_COREDIR = $(COREDIR)\ppport.h
342634f3 1004
b6e5775f
DD
1005MICROCORE_OBJ = $(MICROCORE_SRC:.c=$(o))
1006CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=$(o))
1007WIN32_OBJ = $(WIN32_SRC:.c=$(o))
342634f3 1008
1009MINICORE_OBJ = $(subst ..\,mini\,$(MICROCORE_OBJ)) \
1010 $(MINIDIR)\miniperlmain$(o) \
1011 $(MINIDIR)\perlio$(o)
1012MINIWIN32_OBJ = $(subst .\,mini\,$(WIN32_OBJ))
1013MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
1014DLL_OBJ = $(DYNALOADER)
342634f3 1015
1016PERLDLL_OBJ = $(CORE_OBJ)
1017PERLEXE_OBJ = perlmain$(o)
1018PERLEXEST_OBJ = perlmainst$(o)
1019
1020PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
1021
1022ifneq ($(USE_SETARGV),)
1023SETARGV_OBJ = setargv$(o)
1024endif
1025
1026ifeq ($(ALL_STATIC),define)
1027# some exclusions, unfortunately, until fixed:
1028# - MakeMaker isn't capable enough for SDBM_File (small bug)
1029STATIC_EXT = * !SDBM_File
1030else
1031# specify static extensions here, for example:
1032# (be sure to include Win32CORE to load Win32 on demand)
1033#STATIC_EXT = Win32CORE Cwd Compress/Raw/Zlib
1034STATIC_EXT = Win32CORE
1035endif
1036
1037DYNALOADER = ..\DynaLoader$(o)
1038
1039# vars must be separated by "\t+~\t+", since we're using the tempfile
1040# version of config_sh.pl (we were overflowing someone's buffer by
1041# trying to fit them all on the command line)
1042# -- BKS 10-17-1999
1043CFG_VARS = \
1044 "INST_TOP=$(INST_TOP)" \
1045 "INST_VER=$(INST_VER)" \
1046 "INST_ARCH=$(INST_ARCH)" \
1047 "archname=$(ARCHNAME)" \
1048 "cc=$(CC)" \
1049 "ld=$(LINK32)" \
b6e5775f 1050 "ccflags=$(subst ",\",$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT))" \
bf543eaf 1051 "usecplusplus=$(USE_CPLUSPLUS)" \
342634f3 1052 "cf_email=$(EMAIL)" \
1053 "d_mymalloc=$(PERL_MALLOC)" \
1054 "libs=$(LIBFILES)" \
b6e5775f
DD
1055 "incpath=$(subst ",\",$(CCINCDIR))" \
1056 "libperl=$(subst ",\",$(PERLIMPLIBBASE))" \
1057 "libpth=$(subst ",\",$(CCLIBDIR);$(EXTRALIBDIRS))" \
342634f3 1058 "libc=$(LIBC)" \
bf543eaf 1059 "make=$(PLMAKE)" \
342634f3 1060 "_o=$(o)" \
1061 "obj_ext=$(o)" \
1062 "_a=$(a)" \
1063 "lib_ext=$(a)" \
1064 "static_ext=$(STATIC_EXT)" \
1065 "usethreads=$(USE_ITHREADS)" \
1066 "useithreads=$(USE_ITHREADS)" \
1067 "usemultiplicity=$(USE_MULTI)" \
1068 "useperlio=$(USE_PERLIO)" \
1069 "use64bitint=$(USE_64_BIT_INT)" \
1070 "uselongdouble=$(USE_LONG_DOUBLE)" \
1071 "uselargefiles=$(USE_LARGE_FILES)" \
1072 "usesitecustomize=$(USE_SITECUST)" \
b6e5775f
DD
1073 "LINK_FLAGS=$(subst ",\",$(LINK_FLAGS))"\
1074 "optimize=$(subst ",\",$(OPTIMIZE))" \
342634f3 1075 "ARCHPREFIX=$(ARCHPREFIX)" \
1076 "WIN64=$(WIN64)"
1077
1078#
1079# Top targets
1080#
1081
1082.PHONY: all info
1083
bf543eaf 1084all : info rebasePE Extensions_nonxs $(PERLSTATIC)
342634f3 1085
1086info :
1087 @echo # GCCBIN=$(GCCBIN)
1088 @echo # GCCVER=$(GCCVER1).$(GCCVER2).$(GCCVER3)
1089 @echo # GCCTARGET=$(GCCTARGET)
1090 @echo # GCCCROSS=$(GCCCROSS)
1091 @echo # WIN64=$(WIN64)
1092 @echo # ARCHITECTURE=$(ARCHITECTURE)
1093 @echo # ARCHNAME=$(ARCHNAME)
bf543eaf 1094 @echo # MAKE=$(PLMAKE)
342634f3 1095ifeq ($(GCCTARGET),)
1096 @echo Unable to detect gcc and/or architecture!
1097 @exit 1
1098endif
1099
1100
342634f3 1101..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
1102
1103..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
1104
bf543eaf 1105reonly : ..\regnodes.h .\config.h ..\git_version.h $(GLOBEXE) $(HAVEMINIPERL)\
342634f3 1106 $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
1107 Extensions_reonly
1108
1109static: $(PERLEXESTATIC)
1110
1111#----------------------------------------------------------------
1112
bf543eaf 1113$(GLOBEXE) : perlglob.c
b6e5775f 1114ifeq ($(CCTYPE),GCC)
bf543eaf 1115 $(LINK32) $(OPTIMIZE) $(BLINK_FLAGS) -mconsole -o $@ perlglob.c $(LIBFILES)
b6e5775f 1116else
8e925de9
DD
1117 $(CC) $(OPTIMIZE) $(PDBOUT) -Fe$@ perlglob.c -link $(BLINK_FLAGS) \
1118 setargv$(o) $(LIBFILES) && $(EMBED_EXE_MANI)
b6e5775f 1119endif
bf543eaf
DD
1120
1121..\git_version.h : $(HAVEMINIPERL) ..\make_patchnum.pl
1122 $(MINIPERL) -I..\lib ..\make_patchnum.pl
1123
1124# make sure that we recompile perl.c if the git version changes
1125..\perl$(o) : ..\git_version.h
1126
1127..\config.sh : $(CFGSH_TMPL) config_sh.PL FindExt.pm $(HAVEMINIPERL)
1128 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
1129
1130# This target is for when changes to the main config.sh happen.
1131# Edit config.gc, then make perl using GCC in a minimal configuration (i.e.
1132# with MULTI, ITHREADS, IMP_SYS, LARGE_FILES and PERLIO off), then make
1133# this target to regenerate config_H.gc.
1134regen_config_h:
1135 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
1136 $(MINIPERL) -I..\lib ..\configpm --chdir=..
1137 -del /f $(CFGH_TMPL)
1138 -$(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)"
1139 rename config.h $(CFGH_TMPL)
1140
1141$(CONFIGPM): ..\config.sh config_h.PL
1142 $(MINIPERL) -I..\lib ..\configpm --chdir=..
1143 -$(MINIPERL) -I..\lib config_h.PL "ARCHPREFIX=$(ARCHPREFIX)"
1144
1145.\config.h : $(CONFIGPM)
1146
1147# See the comment in Makefile.SH explaining this seemingly cranky ordering
1148..\lib\buildcustomize.pl : $(MINI_OBJ) ..\write_buildcustomize.pl
b6e5775f 1149ifeq ($(CCTYPE),GCC)
bf543eaf 1150 $(LINK32) -mconsole -o $(MINIPERL) $(BLINK_FLAGS) $(MINI_OBJ) $(LIBFILES)
b6e5775f
DD
1151else
1152 $(LINK32) -out:$(MINIPERL) $(BLINK_FLAGS) \
1153 $(DELAYLOAD) $(MINIDELAYLOAD) $(LIBFILES) $(MINI_OBJ)
1154 $(subst $@,$(MINIPERL),$(EMBED_EXE_MANI))
1155
1156endif
bf543eaf 1157 $(MINIPERL) -I..\lib -f ..\write_buildcustomize.pl ..
342634f3 1158
bf543eaf
DD
1159#convinence target, get a working miniperl
1160mp : $(CONFIGPM)
342634f3 1161
bf543eaf
DD
1162$(MINIDIR)\.exists : $(CFGH_TMPL)
1163 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
342634f3 1164#
1165# Copy the template config.h and set configurables at the end of it
1166# as per the options chosen and compiler used.
1167# Note: This config.h is only used to build miniperl.exe anyway, but
1168# it's as well to have its options correct to be sure that it builds
1169# and so that it's "-V" options are correct for use by makedef.pl. The
1170# real config.h used to build perl.exe is generated from the top-level
1171# config_h.SH by config_h.PL (run by miniperl.exe).
1172#
bf543eaf
DD
1173# MINIDIR generates config.h so miniperl.exe is not rebuilt when the 2nd
1174# config.h is generated in CONFIGPM target, see also the comments for $(MINI_OBJ).
342634f3 1175 copy $(CFGH_TMPL) config.h
6f960640
DD
1176 @(echo.&& \
1177 echo #ifndef _config_h_footer_&& \
1178 echo #define _config_h_footer_&& \
1179 echo #undef Off_t&& \
1180 echo #undef LSEEKSIZE&& \
1181 echo #undef Off_t_size&& \
1182 echo #undef PTRSIZE&& \
1183 echo #undef SSize_t&& \
1184 echo #undef HAS_ATOLL&& \
1185 echo #undef HAS_STRTOLL&& \
1186 echo #undef HAS_STRTOULL&& \
1187 echo #undef Size_t_size&& \
1188 echo #undef IVTYPE&& \
1189 echo #undef UVTYPE&& \
1190 echo #undef IVSIZE&& \
1191 echo #undef UVSIZE&& \
1192 echo #undef NV_PRESERVES_UV&& \
1193 echo #undef NV_PRESERVES_UV_BITS&& \
1194 echo #undef IVdf&& \
1195 echo #undef UVuf&& \
1196 echo #undef UVof&& \
1197 echo #undef UVxf&& \
1198 echo #undef UVXf&& \
1199 echo #undef USE_64_BIT_INT&& \
1200 echo #undef Gconvert&& \
1201 echo #undef HAS_FREXPL&& \
1202 echo #undef HAS_ISNANL&& \
1203 echo #undef HAS_MODFL&& \
1204 echo #undef HAS_MODFL_PROTO&& \
1205 echo #undef HAS_SQRTL&& \
1206 echo #undef HAS_STRTOLD&& \
1207 echo #undef PERL_PRIfldbl&& \
1208 echo #undef PERL_PRIgldbl&& \
1209 echo #undef PERL_PRIeldbl&& \
1210 echo #undef PERL_SCNfldbl&& \
1211 echo #undef NVTYPE&& \
1212 echo #undef NVSIZE&& \
1213 echo #undef LONG_DOUBLESIZE&& \
1214 echo #undef NV_OVERFLOWS_INTEGERS_AT&& \
1215 echo #undef NVef&& \
1216 echo #undef NVff&& \
1217 echo #undef NVgf&& \
1218 echo #undef USE_LONG_DOUBLE)>> config.h
342634f3 1219ifeq ($(USE_LARGE_FILES),define)
6f960640
DD
1220 @(echo #define Off_t $(INT64)&& \
1221 echo #define LSEEKSIZE ^8&& \
1222 echo #define Off_t_size ^8)>> config.h
342634f3 1223else
6f960640
DD
1224 @(echo #define Off_t long&& \
1225 echo #define LSEEKSIZE ^4&& \
1226 echo #define Off_t_size ^4)>> config.h
342634f3 1227endif
1228ifeq ($(WIN64),define)
6f960640
DD
1229 @(echo #define PTRSIZE ^8&& \
1230 echo #define SSize_t $(INT64)&& \
1231 echo #define HAS_ATOLL&& \
1232 echo #define HAS_STRTOLL&& \
1233 echo #define HAS_STRTOULL&& \
1234 echo #define Size_t_size ^8)>> config.h
342634f3 1235else
6f960640
DD
1236 @(echo #define PTRSIZE ^4&& \
1237 echo #define SSize_t int&& \
1238 echo #undef HAS_ATOLL&& \
1239 echo #undef HAS_STRTOLL&& \
1240 echo #undef HAS_STRTOULL&& \
1241 echo #define Size_t_size ^4)>> config.h
342634f3 1242endif
1243ifeq ($(USE_64_BIT_INT),define)
6f960640
DD
1244 @(echo #define IVTYPE $(INT64)&& \
1245 echo #define UVTYPE unsigned $(INT64)&& \
1246 echo #define IVSIZE ^8&& \
1247 echo #define UVSIZE ^8)>> config.h
342634f3 1248ifeq ($(USE_LONG_DOUBLE),define)
6f960640
DD
1249 @(echo #define NV_PRESERVES_UV&& \
1250 echo #define NV_PRESERVES_UV_BITS 64)>> config.h
342634f3 1251else
6f960640
DD
1252 @(echo #undef NV_PRESERVES_UV&& \
1253 echo #define NV_PRESERVES_UV_BITS 53)>> config.h
1254endif
1255 @(echo #define IVdf "I64d"&& \
1256 echo #define UVuf "I64u"&& \
1257 echo #define UVof "I64o"&& \
1258 echo #define UVxf "I64x"&& \
1259 echo #define UVXf "I64X"&& \
1260 echo #define USE_64_BIT_INT)>> config.h
342634f3 1261else
6f960640
DD
1262 @(echo #define IVTYPE long&& \
1263 echo #define UVTYPE unsigned long&& \
1264 echo #define IVSIZE ^4&& \
1265 echo #define UVSIZE ^4&& \
1266 echo #define NV_PRESERVES_UV&& \
1267 echo #define NV_PRESERVES_UV_BITS 32&& \
1268 echo #define IVdf "ld"&& \
1269 echo #define UVuf "lu"&& \
1270 echo #define UVof "lo"&& \
1271 echo #define UVxf "lx"&& \
1272 echo #define UVXf "lX"&& \
1273 echo #undef USE_64_BIT_INT)>> config.h
342634f3 1274endif
1275ifeq ($(USE_LONG_DOUBLE),define)
6f960640
DD
1276 @(echo #define Gconvert^(x,n,t,b^) sprintf^(^(b^),"%%.*""Lg",^(n^),^(x^)^)&& \
1277 echo #define HAS_FREXPL&& \
1278 echo #define HAS_ISNANL&& \
1279 echo #define HAS_MODFL&& \
1280 echo #define HAS_MODFL_PROTO&& \
1281 echo #define HAS_SQRTL&& \
1282 echo #define HAS_STRTOLD&& \
1283 echo #define PERL_PRIfldbl "Lf"&& \
1284 echo #define PERL_PRIgldbl "Lg"&& \
1285 echo #define PERL_PRIeldbl "Le"&& \
1286 echo #define PERL_SCNfldbl "Lf"&& \
1287 echo #define NVTYPE long double)>> config.h
342634f3 1288ifeq ($(WIN64),define)
6f960640
DD
1289 @(echo #define NVSIZE ^16&& \
1290 echo #define LONG_DOUBLESIZE ^16)>> config.h
342634f3 1291else
6f960640
DD
1292 @(echo #define NVSIZE ^12&& \
1293 echo #define LONG_DOUBLESIZE ^12)>> config.h
1294endif
1295 @(echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0*2.0&& \
1296 echo #define NVef "Le"&& \
1297 echo #define NVff "Lf"&& \
1298 echo #define NVgf "Lg"&& \
1299 echo #define USE_LONG_DOUBLE)>> config.h
342634f3 1300else
6f960640
DD
1301 @(echo #define Gconvert^(x,n,t,b^) sprintf^(^(b^),"%%.*g",^(n^),^(x^)^)&& \
1302 echo #undef HAS_FREXPL&& \
1303 echo #undef HAS_ISNANL&& \
1304 echo #undef HAS_MODFL&& \
1305 echo #undef HAS_MODFL_PROTO&& \
1306 echo #undef HAS_SQRTL&& \
1307 echo #undef HAS_STRTOLD&& \
1308 echo #undef PERL_PRIfldbl&& \
1309 echo #undef PERL_PRIgldbl&& \
1310 echo #undef PERL_PRIeldbl&& \
1311 echo #undef PERL_SCNfldbl&& \
1312 echo #define NVTYPE double&& \
1313 echo #define NVSIZE ^8&& \
1314 echo #define LONG_DOUBLESIZE ^8&& \
1315 echo #define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0&& \
1316 echo #define NVef "e"&& \
1317 echo #define NVff "f"&& \
1318 echo #define NVgf "g"&& \
1319 echo #undef USE_LONG_DOUBLE)>> config.h
1320endif
1321ifeq ($(USE_CPLUSPLUS),define)
1322 @(echo #define USE_CPLUSPLUS&& \
1323 echo #endif)>> config.h
1324else
1325 @(echo #undef USE_CPLUSPLUS&& \
1326 echo #endif)>> config.h
1327endif
bf543eaf
DD
1328#separate line since this is sentinal that this target is done
1329 rem. > $(MINIDIR)\.exists
342634f3 1330
1331$(MINICORE_OBJ) : $(CORE_NOCFG_H)
bf543eaf 1332 $(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(PDBOUT) ..\$(*F).c
342634f3 1333
1334$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
bf543eaf 1335 $(CC) -c $(CFLAGS) $(MINIBUILDOPT) -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(PDBOUT) $(*F).c
342634f3 1336
1337# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
1338# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
bf543eaf 1339# unless the .IF is true), so instead we use a .ELSE with the default.
342634f3 1340# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
1341
bf543eaf 1342perllib$(o) : perllib.c perllibst.h .\perlhost.h .\vdir.h .\vmem.h
342634f3 1343ifeq ($(USE_IMP_SYS),define)
bf543eaf 1344 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ $(PDBOUT) perllib.c
342634f3 1345else
bf543eaf 1346 $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ $(PDBOUT) perllib.c
342634f3 1347endif
1348
1349# 1. we don't want to rebuild miniperl.exe when config.h changes
1350# 2. we don't want to rebuild miniperl.exe with non-default config.h
1351# 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
bf543eaf 1352$(MINI_OBJ) : $(MINIDIR)\.exists $(CORE_NOCFG_H)
342634f3 1353
1354$(WIN32_OBJ) : $(CORE_H)
1355
1356$(CORE_OBJ) : $(CORE_H)
1357
1358$(DLL_OBJ) : $(CORE_H)
1359
bf543eaf
DD
1360
1361perllibst.h : $(HAVEMINIPERL) $(CONFIGPM) create_perllibst_h.pl
342634f3 1362 $(MINIPERL) -I..\lib create_perllibst_h.pl
bf543eaf
DD
1363
1364perldll.def : $(HAVEMINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl
342634f3 1365 $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
b6e5775f 1366 $(BUILDOPT) CCTYPE=$(CCTYPE) TARG_DIR=..\ > perldll.def
342634f3 1367
bf543eaf
DD
1368$(PERLEXPLIB) : $(PERLIMPLIB)
1369
1370$(PERLIMPLIB) : perldll.def
b6e5775f 1371ifeq ($(CCTYPE),GCC)
bf543eaf 1372 $(IMPLIB) -k -d perldll.def -l $(PERLIMPLIB) -e $(PERLEXPLIB)
b6e5775f
DD
1373else
1374 lib -def:perldll.def -machine:$(ARCHITECTURE) /OUT:$(PERLIMPLIB)
1375endif
bf543eaf
DD
1376
1377$(PERLDLL): $(PERLEXPLIB) $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
b6e5775f 1378ifeq ($(CCTYPE),GCC)
342634f3 1379 $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
bf543eaf 1380 $(PERLDLL_OBJ) $(shell type Extensions_static) $(LIBFILES) $(PERLEXPLIB)
b6e5775f
DD
1381else
1382 $(LINK32) -dll -out:$@ $(BLINK_FLAGS) \
1383 @Extensions_static \
1384 -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \
1385 $(PERLDLL_RES) $(PERLDLL_OBJ) $(PERLEXPLIB)
1386 $(EMBED_DLL_MANI)
1387endif
342634f3 1388
1389$(PERLSTATICLIB): $(PERLDLL_OBJ) Extensions_static
b6e5775f 1390ifeq ($(CCTYPE),GCC)
342634f3 1391 $(LIB32) $(LIB_FLAGS) $@ $(PERLDLL_OBJ)
1392 if exist $(STATICDIR) rmdir /s /q $(STATICDIR)
1393 for %%i in ($(shell type Extensions_static)) do \
1394 @mkdir $(STATICDIR) && cd $(STATICDIR) && \
1395 $(ARCHPREFIX)ar x ..\%%i && \
1396 $(ARCHPREFIX)ar q ..\$@ *$(o) && \
1397 cd .. && rmdir /s /q $(STATICDIR)
b6e5775f
DD
1398else
1399 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \
1400 $(PERLDLL_OBJ)
1401endif
342634f3 1402 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
1403
1404$(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
1405
1406$(MINIDIR)\globals$(o) : $(GENERATED_HEADERS)
1407
1408$(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H)
1409
1410$(BITCOUNT_H) : $(GENUUDMAP)
1411 $(GENUUDMAP) $(GENERATED_HEADERS)
1412
bf543eaf 1413$(GENUUDMAP) : ..\mg_raw.h
b6e5775f 1414ifeq ($(CCTYPE),GCC)
bf543eaf
DD
1415 $(LINK32) $(CFLAGS_O) -o..\generate_uudmap.exe ..\generate_uudmap.c \
1416 $(BLINK_FLAGS) $(LIBFILES)
b6e5775f 1417else
8e925de9 1418 $(CC) $(CFLAGS_O) $(PDBOUT) -Fe..\generate_uudmap.exe ..\generate_uudmap.c -link $(LIBFILES) $(BLINK_FLAGS)
b6e5775f
DD
1419 $(EMBED_EXE_MANI)
1420endif
342634f3 1421
bf543eaf
DD
1422#This generates a stub ppport.h & creates & fills /lib/CORE to allow for XS
1423#building .c->.obj wise (linking is a different thing). This target is AKA
1424#$(HAVE_COREDIR).
1425$(COREDIR)\ppport.h : $(CORE_H)
1426 $(XCOPY) *.h $(COREDIR)\\*.*
1427 $(RCOPY) include $(COREDIR)\\*.*
1428 $(XCOPY) ..\\*.h $(COREDIR)\\*.*
1429 rem. > $@
342634f3 1430
bf543eaf
DD
1431perlmain$(o) : runperl.c $(CONFIGPM)
1432 $(CC) $(subst -DPERLDLL,-UPERLDLL,$(CFLAGS_O)) $(OBJOUT_FLAG)$@ $(PDBOUT) -c runperl.c
342634f3 1433
bf543eaf
DD
1434perlmainst$(o) : runperl.c $(CONFIGPM)
1435 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $(PDBOUT) -c runperl.c
342634f3 1436
bf543eaf 1437$(PERLEXE): $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB)
b6e5775f 1438ifeq ($(CCTYPE),GCC)
342634f3 1439 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1440 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
b6e5775f
DD
1441else
1442 $(LINK32) -out:$@ $(BLINK_FLAGS) \
1443 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES) $(SETARGV_OBJ)
1444 $(EMBED_EXE_MANI)
1445endif
342634f3 1446 copy $(PERLEXE) $(WPERLEXE)
1447 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1448
1449$(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
b6e5775f 1450ifeq ($(CCTYPE),GCC)
342634f3 1451 $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
1452 $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES)
b6e5775f
DD
1453else
1454 $(LINK32) -out:$@ $(BLINK_FLAGS) \
1455 $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES) $(SETARGV_OBJ)
1456 $(EMBED_EXE_MANI)
1457endif
342634f3 1458
342634f3 1459#-------------------------------------------------------------------------------
1460# There's no direct way to mark a dependency on
1461# DynaLoader.pm, so this will have to do
342634f3 1462
bf543eaf
DD
1463#most of deps of this target are in DYNALOADER and therefore omitted here
1464Extensions : $(PERLDEP) $(DYNALOADER) $(GLOBEXE)
1465 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic !Unicode/Normalize
1466
1467Extensions_normalize : $(PERLDEP) $(DYNALOADER) $(GLOBEXE) $(UNIDATAFILES)
1468 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +Unicode/Normalize
1469
1470Extensions_reonly : $(PERLDEP) $(DYNALOADER)
1471 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
342634f3 1472
bf543eaf
DD
1473Extensions_static : ..\make_ext.pl list_static_libs.pl $(CONFIGPM) $(GLOBEXE) $(HAVE_COREDIR)
1474 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
342634f3 1475 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1476
bf543eaf
DD
1477Extensions_nonxs : ..\make_ext.pl ..\pod\perlfunc.pod $(CONFIGPM) $(GLOBEXE)
1478 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs !libs
342634f3 1479
bf543eaf
DD
1480#lib must be built, it can't be buildcustomize.pl-ed, and is required for XS building
1481$(DYNALOADER) : ..\make_ext.pl $(CONFIGPM) $(HAVE_COREDIR)
1482 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(EXTDIR) --dir=$(DISTDIR) --dynaloader lib
342634f3 1483
1484Extensions_clean :
bf543eaf 1485 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
342634f3 1486
1487Extensions_realclean :
bf543eaf
DD
1488 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(PLMAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
1489
1490# all PE files need to be built by the time this target runs, PP files can still
1491# be running in parallel like UNIDATAFILES, this target a placeholder for the
1492# future
1493ifeq ($(BUILD_STATIC),define)
1494rebasePE : Extensions $(PERLDLL) Extensions_normalize $(PERLEXE) $(PERLEXESTATIC)
1495else
1496rebasePE : Extensions $(PERLDLL) Extensions_normalize $(PERLEXE)
1497endif
1498 $(NOOP)
342634f3 1499
1500#-------------------------------------------------------------------------------
1501
bf543eaf 1502doc: $(PERLEXE) $(PERLDLL) ..\pod\perltoc.pod
342634f3 1503 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1504 --podpath=pod:lib:utils --htmlroot="file://$(subst :,|,$(INST_HTML))"\
1505 --recurse
1506
1507..\utils\Makefile: $(CONFIGPM) ..\utils\Makefile.PL
1508 $(MINIPERL) -I..\lib ..\utils\Makefile.PL ..
1509
1510# Note that this next section is parsed (and regenerated) by pod/buildtoc
1511# so please check that script before making structural changes here
bf543eaf
DD
1512utils: $(HAVEMINIPERL) ..\utils\Makefile
1513 cd ..\utils && $(PLMAKE) PERL=$(MINIPERL)
342634f3 1514 copy ..\README.aix ..\pod\perlaix.pod
1515 copy ..\README.amiga ..\pod\perlamiga.pod
1516 copy ..\README.android ..\pod\perlandroid.pod
1517 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1518 copy ..\README.ce ..\pod\perlce.pod
1519 copy ..\README.cn ..\pod\perlcn.pod
1520 copy ..\README.cygwin ..\pod\perlcygwin.pod
1521 copy ..\README.dos ..\pod\perldos.pod
1522 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1523 copy ..\README.haiku ..\pod\perlhaiku.pod
1524 copy ..\README.hpux ..\pod\perlhpux.pod
1525 copy ..\README.hurd ..\pod\perlhurd.pod
1526 copy ..\README.irix ..\pod\perlirix.pod
1527 copy ..\README.jp ..\pod\perljp.pod
1528 copy ..\README.ko ..\pod\perlko.pod
1529 copy ..\README.linux ..\pod\perllinux.pod
1530 copy ..\README.macos ..\pod\perlmacos.pod
1531 copy ..\README.macosx ..\pod\perlmacosx.pod
1532 copy ..\README.netware ..\pod\perlnetware.pod
1533 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1534 copy ..\README.os2 ..\pod\perlos2.pod
1535 copy ..\README.os390 ..\pod\perlos390.pod
1536 copy ..\README.os400 ..\pod\perlos400.pod
1537 copy ..\README.plan9 ..\pod\perlplan9.pod
1538 copy ..\README.qnx ..\pod\perlqnx.pod
1539 copy ..\README.riscos ..\pod\perlriscos.pod
1540 copy ..\README.solaris ..\pod\perlsolaris.pod
1541 copy ..\README.symbian ..\pod\perlsymbian.pod
1542 copy ..\README.synology ..\pod\perlsynology.pod
1543 copy ..\README.tru64 ..\pod\perltru64.pod
1544 copy ..\README.tw ..\pod\perltw.pod
1545 copy ..\README.vos ..\pod\perlvos.pod
1546 copy ..\README.win32 ..\pod\perlwin32.pod
0302547a 1547 copy ..\pod\perldelta.pod ..\pod\perl5251delta.pod
bf543eaf 1548 $(MINIPERL) -I..\lib $(PL2BAT) $(UTILS)
342634f3 1549 $(MINIPERL) -I..\lib ..\autodoc.pl ..
1550 $(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q ..
1551
bf543eaf 1552..\pod\perltoc.pod: $(PERLEXE) $(PERLDLL) Extensions Extensions_nonxs Extensions_normalize utils
342634f3 1553 $(PERLEXE) -f ..\pod\buildtoc -q
1554
1555# Note that the pod cleanup in this next section is parsed (and regenerated
1556# by pod/buildtoc so please check that script before making changes here
1557
1558distclean: realclean
1559 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1560 $(PERLIMPLIB) ..\miniperl$(a) $(PERLEXESTATIC) $(PERLSTATICLIB)
1561 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1562 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1563 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1564 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1565 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1566 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1567 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1568 -del /f $(LIBDIR)\File\Glob.pm
1569 -del /f $(LIBDIR)\Storable.pm
1570 -del /f $(LIBDIR)\Sys\Hostname.pm
1571 -del /f $(LIBDIR)\Time\HiRes.pm
1572 -del /f $(LIBDIR)\Unicode\Normalize.pm
1573 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1574 -del /f $(LIBDIR)\Win32.pm
1575 -del /f $(LIBDIR)\Win32CORE.pm
1576 -del /f $(LIBDIR)\Win32API\File.pm
1577 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1578 -del /f $(LIBDIR)\buildcustomize.pl
1579 -del /f $(DISTDIR)\XSLoader\XSLoader.pm
1580 -del /f *.def *.map
1581 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1582 -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
1583 -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
1584 -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie
1585 -if exist $(LIBDIR)\Carp rmdir /s /q $(LIBDIR)\Carp
1586 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1587 -if exist $(LIBDIR)\Config\Perl rmdir /s /q $(LIBDIR)\Config\Perl
1588 -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN
1589 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1590 -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel
1591 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
1592 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1593 -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding
1594 -if exist $(LIBDIR)\Exporter rmdir /s /q $(LIBDIR)\Exporter
1595 -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder
1596 -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command
1597 -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant
1598 -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist
1599 -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker
1600 -if exist $(LIBDIR)\ExtUtils\ParseXS rmdir /s /q $(LIBDIR)\ExtUtils\ParseXS
1601 -if exist $(LIBDIR)\ExtUtils\Typemaps rmdir /s /q $(LIBDIR)\ExtUtils\Typemaps
1602 -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec
1603 -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter
1604 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1605 -if exist $(LIBDIR)\HTTP rmdir /s /q $(LIBDIR)\HTTP
1606 -if exist $(LIBDIR)\I18N rmdir /s /q $(LIBDIR)\I18N
df61f5a9 1607 -if exist $(LIBDIR)\inc rmdir /s /q $(LIBDIR)\inc
342634f3 1608 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
1609 -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC
1610 -if exist $(LIBDIR)\JSON rmdir /s /q $(LIBDIR)\JSON
1611 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1612 -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale
1613 -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math
1614 -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize
1615 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1616 -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
1617 -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
1618 -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
1619 -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
1620 -if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl
1621 -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO
1622 -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc
1623 -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple
1624 -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text
1625 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1626 -if exist $(LIBDIR)\Search rmdir /s /q $(LIBDIR)\Search
1627 -if exist $(LIBDIR)\Sub rmdir /s /q $(LIBDIR)\Sub
1628 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1629 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1630 -if exist $(LIBDIR)\Term rmdir /s /q $(LIBDIR)\Term
1631 -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
ec35cd4c 1632 -if exist $(LIBDIR)\Test2 rmdir /s /q $(LIBDIR)\Test
342634f3 1633 -if exist $(LIBDIR)\Text rmdir /s /q $(LIBDIR)\Text
1634 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
1635 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1636 -if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash
1637 -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
1638 -if exist $(LIBDIR)\Unicode\Collate\Locale rmdir /s /q $(LIBDIR)\Unicode\Collate\Locale
1639 -if exist $(LIBDIR)\version rmdir /s /q $(LIBDIR)\version
1640 -if exist $(LIBDIR)\VMS rmdir /s /q $(LIBDIR)\VMS
1641 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1642 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1643 -cd $(PODDIR) && del /f *.html *.bat roffitall \
0302547a 1644 perl5251delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
342634f3 1645 perlapi.pod perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1646 perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
1647 perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
1648 perllinux.pod perlmacos.pod perlmacosx.pod perlmodlib.pod \
1649 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1650 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1651 perlsolaris.pod perlsymbian.pod perlsynology.pod perltoc.pod \
1652 perltru64.pod perltw.pod perluniprops.pod perlvos.pod \
1653 perlwin32.pod
1654 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
bf543eaf 1655 perldoc perlivp libnetcfg enc2xs encguess piconv cpan *.bat \
342634f3 1656 xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep shasum corelist zipdetails
1657 -del /f ..\config.sh perlmain.c dlutils.c config.h.new \
1658 perlmainst.c
1659 -del /f $(CONFIGPM)
1660 -del /f ..\lib\Config_git.pl
1661 -del /f "bin\*.bat"
1662 -del /f perllibst.h
1663 -del /f $(PERLEXE_RES) perl.base
1664 -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib ppport.h
1665 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1666 -cd $(DISTDIR) && del /s *.def Makefile Makefile.old
1667 -cd $(CPANDIR) && del /s *.def Makefile Makefile.old
1668 -del /s ..\utils\Makefile
1669 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1670 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1671 -if exist pod2htmd.tmp del pod2htmd.tmp
1672 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1673 -del /f ..\t\test_state
1674
1675install : all installbare installhtml
1676
1677installbare : utils ..\pod\perltoc.pod
1678 $(PERLEXE) ..\installperl
1679 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\$(NULL)
1680 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\$(NULL)
1681 $(XCOPY) $(GLOBEXE) $(INST_BIN)\$(NULL)
1682 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\$(NULL)
1683 $(XCOPY) "bin\*.bat" $(INST_SCRIPT)\$(NULL)
1684
1685installhtml : doc
1686 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\$(NULL)
1687
1688inst_lib : $(CONFIGPM)
1689 $(RCOPY) ..\lib $(INST_LIB)\$(NULL)
1690
bf543eaf
DD
1691$(UNIDATAFILES) : ..\pod\perluniprops.pod
1692
1693..\pod\perluniprops.pod: ..\lib\unicore\mktables $(CONFIGPM)
1694 $(MINIPERL) -I..\lib ..\lib\unicore\mktables -C ..\lib\unicore -P ..\pod -maketest -makelist -p
342634f3 1695
bf543eaf 1696minitest : $(HAVEMINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
342634f3 1697 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1698 if exist ..\t\perl.exe del /f ..\t\perl.exe
1699 rename ..\t\miniperl.exe perl.exe
1700 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1701 attrib -r "..\t\*.*"
1702 cd ..\t && \
1703 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t opbasic/*.t op/*.t pragma/*.t
1704
b6e5775f 1705test-prep : all utils ..\pod\perltoc.pod $(TESTPREPGCC)
342634f3 1706 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1707 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1708 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1709# If building with gcc versions 4.x.x or greater, then
1710# the GCC helper DLL will also need copied to the test directory.
1711# The name of the dll can change, depending upon which vendor has supplied
1712# your compiler, and upon the values of "x".
1713# libstdc++-6.dll is copied if it exists as it, too, may then be needed.
1714# Without this copying, the op/taint.t test script will fail.
b6e5775f
DD
1715
1716ifeq ($(CCTYPE),GCC)
1717
1718test-prep-gcc :
342634f3 1719 if exist $(CCDLLDIR)\libgcc_s_seh-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_seh-1.dll ..\t\$(NULL)
1720 if exist $(CCDLLDIR)\libgcc_s_sjlj-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_sjlj-1.dll ..\t\$(NULL)
1721 if exist $(CCDLLDIR)\libgcc_s_dw2-1.dll $(XCOPY) $(CCDLLDIR)\libgcc_s_dw2-1.dll ..\t\$(NULL)
1722 if exist $(CCDLLDIR)\libstdc++-6.dll $(XCOPY) $(CCDLLDIR)\libstdc++-6.dll ..\t\$(NULL)
1723 if exist $(CCDLLDIR)\libwinpthread-1.dll $(XCOPY) $(CCDLLDIR)\libwinpthread-1.dll ..\t\$(NULL)
1724
b6e5775f
DD
1725endif
1726
342634f3 1727test : test-prep
1728 set PERL_STATIC_EXT=$(STATIC_EXT) && \
b6e5775f 1729 cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)
342634f3 1730
1731test_porting : test-prep
1732 set PERL_STATIC_EXT=$(STATIC_EXT) && \
b6e5775f 1733 cd ..\t && perl.exe harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t
342634f3 1734
1735test-reonly : reonly utils
1736 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1737 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1738 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
bf543eaf 1739 cd ..\t && perl.exe harness $(OPT) -re \bpat\\/ $(EXTRA)
342634f3 1740
1741regen :
bf543eaf 1742 cd .. && regen.pl
342634f3 1743
1744test-notty : test-prep
1745 set PERL_STATIC_EXT=$(STATIC_EXT) && \
1746 set PERL_SKIP_TTY_TEST=1 && \
bf543eaf 1747 cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)
342634f3 1748
1749_test :
1750 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1751 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1752 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1753 set PERL_STATIC_EXT=$(STATIC_EXT) && \
bf543eaf 1754 cd ..\t && perl.exe harness $(TEST_SWITCHES) $(TEST_FILES)
342634f3 1755
1756_clean :
1757 -@erase miniperlmain$(o)
1758 -@erase $(MINIPERL)
1759 -@erase perlglob$(o)
1760 -@erase perlmain$(o)
1761 -@erase perlmainst$(o)
342634f3 1762 -@erase /f config.h
1763 -@erase /f ..\git_version.h
1764 -@erase $(GLOBEXE)
1765 -@erase $(PERLEXE)
1766 -@erase $(WPERLEXE)
1767 -@erase $(PERLEXESTATIC)
1768 -@erase $(PERLSTATICLIB)
1769 -@erase $(PERLDLL)
1770 -@erase $(CORE_OBJ)
1771 -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(GENERATED_HEADERS)
1772 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1773 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1774 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1775 -@erase $(UNIDATAFILES)
1776 -@erase $(WIN32_OBJ)
1777 -@erase $(DLL_OBJ)
1778 -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
1779 -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1780 -@erase *.ilk
bf543eaf 1781 -@erase *.pdb ..\*.pdb
342634f3 1782 -@erase Extensions_static
1783
1784clean : Extensions_clean _clean
1785
1786realclean : Extensions_realclean _clean
1787
1788# Handy way to run perlbug -ok without having to install and run the
1789# installed perlbug. We don't re-run the tests here - we trust the user.
1790# Please *don't* use this unless all tests pass.
1791# If you want to report test failures, use "gmake nok" instead.
bf543eaf
DD
1792ok: utils $(PERLEXE) $(PERLDLL) Extensions_nonxs Extensions
1793 $(PERLEXE) ..\utils\perlbug -ok -s "(UNINSTALLED)"
1794
1795okfile: utils $(PERLEXE) $(PERLDLL) Extensions_nonxs Extensions
1796 $(PERLEXE) ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
342634f3 1797
bf543eaf
DD
1798nok: utils $(PERLEXE) $(PERLDLL) Extensions_nonxs Extensions
1799 $(PERLEXE) ..\utils\perlbug -nok -s "(UNINSTALLED)"
342634f3 1800
bf543eaf
DD
1801nokfile: utils $(PERLEXE) $(PERLDLL) Extensions_nonxs Extensions
1802 $(PERLEXE) ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
342634f3 1803