This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
Quieten some noise in Win32 builds:
[perl5.git] / perlio.h
CommitLineData
76ced9ad
NIS
1#ifndef _PERLIO_H
2#define _PERLIO_H
3/*
4 Interface for perl to IO functions.
5 There is a hierachy of Configure determined #define controls:
6 USE_STDIO - forces PerlIO_xxx() to be #define-d onto stdio functions.
7 This is used for x2p subdirectory and for conservative
8 builds - "just like perl5.00X used to be".
9 This dominates over the others.
10
11 USE_PERLIO - The primary Configure variable that enables PerlIO.
12 If USE_PERLIO is _NOT_ set
13 then USE_STDIO above will be set to be conservative.
14 If USE_PERLIO is set
15 then there are two modes determined by USE_SFIO:
16
17 USE_SFIO - If set causes PerlIO_xxx() to be #define-d onto sfio functions.
18 A backward compatability mode for some specialist applications.
19
20 If USE_SFIO is not set then PerlIO_xxx() are real functions
21 defined in perlio.c which implement extra functionality
22 required for utf8 support.
23
24 One further note - the table-of-functions scheme controlled
25 by PERL_IMPLICIT_SYS turns on USE_PERLIO so that iperlsys.h can
26 #define PerlIO_xxx() to go via the function table, without having
27 to #undef them from (say) stdio forms.
28
29*/
30
31#if defined(PERL_IMPLICIT_SYS)
32#ifndef USE_PERLIO
33# define USE_PERLIO
34#endif
35#endif
36
37#ifndef USE_PERLIO
38# define USE_STDIO
39#endif
40
41#ifdef USE_STDIO
42# ifndef PERLIO_IS_STDIO
43# define PERLIO_IS_STDIO
44# endif
45#endif
46
47/* -------------------- End of Configure controls ---------------------------- */
48
49/*
50 * Although we may not want stdio to be used including <stdio.h> here
51 * avoids issues where stdio.h has strange side effects
52 */
53#include <stdio.h>
54
55#if defined(USE_64_BIT_STDIO) && defined(HAS_FTELLO) && !defined(USE_FTELL64)
56#define ftell ftello
57#endif
58
59#if defined(USE_64_BIT_STDIO) && defined(HAS_FSEEKO) && !defined(USE_FSEEK64)
60#define fseek fseeko
61#endif
62
63#ifdef PERLIO_IS_STDIO
64/* #define PerlIO_xxxx() as equivalent stdio function */
65#include "perlsdio.h"
66#else /* PERLIO_IS_STDIO */
67#ifdef USE_SFIO
68/* #define PerlIO_xxxx() as equivalent sfio function */
69#include "perlsfio.h"
70#endif /* USE_SFIO */
71#endif /* PERLIO_IS_STDIO */
72
73#ifndef PerlIO
74/* ----------- PerlIO implementation ---------- */
75/* PerlIO not #define-d to something else - define the implementation */
76
77typedef struct _PerlIO PerlIOl;
78typedef struct _PerlIO_funcs PerlIO_funcs;
79typedef PerlIOl *PerlIO;
80#define PerlIO PerlIO
a1d180c4 81#define PERLIO_LAYERS 1
76ced9ad
NIS
82
83extern void PerlIO_define_layer (PerlIO_funcs *tab);
ac27b0f5 84extern SV * PerlIO_find_layer (const char *name, STRLEN len);
76ced9ad
NIS
85extern PerlIO * PerlIO_push (PerlIO *f,PerlIO_funcs *tab,const char *mode);
86extern void PerlIO_pop (PerlIO *f);
87
88#endif /* PerlIO */
89
90/* ----------- End of implementation choices ---------- */
91
92#ifndef PERLIO_IS_STDIO
93/* Not using stdio _directly_ as PerlIO */
94
95/* We now need to determine what happens if source trys to use stdio.
96 * There are three cases based on PERLIO_NOT_STDIO which XS code
97 * can set how it wants.
98 */
99
100#ifdef PERL_CORE
101/* Make a choice for perl core code
102 - currently this is set to try and catch lingering raw stdio calls.
103 This is a known issue with some non UNIX ports which still use
104 "native" stdio features.
105*/
106#ifndef PERLIO_NOT_STDIO
107#define PERLIO_NOT_STDIO 1
108#endif
109#endif
110
111#ifdef PERLIO_NOT_STDIO
112#if PERLIO_NOT_STDIO
113/*
114 * PERLIO_NOT_STDIO #define'd as 1
115 * Case 1: Strong denial of stdio - make all stdio calls (we can think of) errors
116 */
117#include "nostdio.h"
118#else /* if PERLIO_NOT_STDIO */
119/*
120 * PERLIO_NOT_STDIO #define'd as 0
121 * Case 2: Declares that both PerlIO and stdio can be used
122 */
123#endif /* if PERLIO_NOT_STDIO */
124#else /* ifdef PERLIO_NOT_STDIO */
125/*
126 * PERLIO_NOT_STDIO not defined
127 * Case 3: Try and fake stdio calls as PerlIO calls
128 */
129#include "fakesdio.h"
130#endif /* ifndef PERLIO_NOT_STDIO */
131#endif /* PERLIO_IS_STDIO */
132
ac27b0f5
NIS
133#define specialCopIO(sv) ((sv) != Nullsv)
134
76ced9ad
NIS
135/* ----------- fill in things that have not got #define'd ---------- */
136
137#ifndef Fpos_t
138#define Fpos_t Off_t
139#endif
140
141#ifndef EOF
142#define EOF (-1)
143#endif
144
145/* This is to catch case with no stdio */
146#ifndef BUFSIZ
147#define BUFSIZ 1024
148#endif
149
150#ifndef SEEK_SET
151#define SEEK_SET 0
152#endif
153
154#ifndef SEEK_CUR
155#define SEEK_CUR 1
156#endif
157
158#ifndef SEEK_END
159#define SEEK_END 2
160#endif
161
162/* --------------------- Now prototypes for functions --------------- */
163
adb71456
NIS
164START_EXTERN_C
165
76ced9ad
NIS
166#ifndef NEXT30_NO_ATTRIBUTE
167#ifndef HASATTRIBUTE /* disable GNU-cc attribute checking? */
168#ifdef __attribute__ /* Avoid possible redefinition errors */
169#undef __attribute__
170#endif
171#define __attribute__(attr)
172#endif
173#endif
174
175#ifndef PerlIO_init
176extern void PerlIO_init (void);
177#endif
178#ifndef PerlIO_stdoutf
179extern int PerlIO_stdoutf (const char *,...)
180 __attribute__((__format__ (__printf__, 1, 2)));
181#endif
182#ifndef PerlIO_puts
183extern int PerlIO_puts (PerlIO *,const char *);
184#endif
185#ifndef PerlIO_open
186extern PerlIO * PerlIO_open (const char *,const char *);
187#endif
188#ifndef PerlIO_close
189extern int PerlIO_close (PerlIO *);
190#endif
191#ifndef PerlIO_eof
192extern int PerlIO_eof (PerlIO *);
193#endif
194#ifndef PerlIO_error
195extern int PerlIO_error (PerlIO *);
196#endif
197#ifndef PerlIO_clearerr
198extern void PerlIO_clearerr (PerlIO *);
199#endif
200#ifndef PerlIO_getc
201extern int PerlIO_getc (PerlIO *);
202#endif
203#ifndef PerlIO_putc
204extern int PerlIO_putc (PerlIO *,int);
205#endif
206#ifndef PerlIO_flush
207extern int PerlIO_flush (PerlIO *);
208#endif
209#ifndef PerlIO_ungetc
210extern int PerlIO_ungetc (PerlIO *,int);
211#endif
212#ifndef PerlIO_fileno
213extern int PerlIO_fileno (PerlIO *);
214#endif
215#ifndef PerlIO_fdopen
216extern PerlIO * PerlIO_fdopen (int, const char *);
217#endif
218#ifndef PerlIO_importFILE
219extern PerlIO * PerlIO_importFILE (FILE *,int);
220#endif
221#ifndef PerlIO_exportFILE
222extern FILE * PerlIO_exportFILE (PerlIO *,int);
223#endif
224#ifndef PerlIO_findFILE
225extern FILE * PerlIO_findFILE (PerlIO *);
226#endif
227#ifndef PerlIO_releaseFILE
228extern void PerlIO_releaseFILE (PerlIO *,FILE *);
229#endif
230#ifndef PerlIO_read
231extern SSize_t PerlIO_read (PerlIO *,void *,Size_t);
232#endif
233#ifndef PerlIO_write
234extern SSize_t PerlIO_write (PerlIO *,const void *,Size_t);
235#endif
236#ifndef PerlIO_setlinebuf
237extern void PerlIO_setlinebuf (PerlIO *);
238#endif
239#ifndef PerlIO_printf
240extern int PerlIO_printf (PerlIO *, const char *,...)
241 __attribute__((__format__ (__printf__, 2, 3)));
242#endif
243#ifndef PerlIO_sprintf
244extern int PerlIO_sprintf (char *, int, const char *,...)
245 __attribute__((__format__ (__printf__, 3, 4)));
246#endif
247#ifndef PerlIO_vprintf
248extern int PerlIO_vprintf (PerlIO *, const char *, va_list);
249#endif
250#ifndef PerlIO_tell
251extern Off_t PerlIO_tell (PerlIO *);
252#endif
253#ifndef PerlIO_seek
254extern int PerlIO_seek (PerlIO *, Off_t, int);
255#endif
256#ifndef PerlIO_rewind
257extern void PerlIO_rewind (PerlIO *);
258#endif
259#ifndef PerlIO_has_base
260extern int PerlIO_has_base (PerlIO *);
261#endif
262#ifndef PerlIO_has_cntptr
263extern int PerlIO_has_cntptr (PerlIO *);
264#endif
265#ifndef PerlIO_fast_gets
266extern int PerlIO_fast_gets (PerlIO *);
267#endif
268#ifndef PerlIO_canset_cnt
269extern int PerlIO_canset_cnt (PerlIO *);
270#endif
271#ifndef PerlIO_get_ptr
272extern STDCHAR * PerlIO_get_ptr (PerlIO *);
273#endif
274#ifndef PerlIO_get_cnt
275extern int PerlIO_get_cnt (PerlIO *);
276#endif
277#ifndef PerlIO_set_cnt
278extern void PerlIO_set_cnt (PerlIO *,int);
279#endif
280#ifndef PerlIO_set_ptrcnt
281extern void PerlIO_set_ptrcnt (PerlIO *,STDCHAR *,int);
282#endif
283#ifndef PerlIO_get_base
284extern STDCHAR * PerlIO_get_base (PerlIO *);
285#endif
286#ifndef PerlIO_get_bufsiz
287extern int PerlIO_get_bufsiz (PerlIO *);
288#endif
289#ifndef PerlIO_tmpfile
290extern PerlIO * PerlIO_tmpfile (void);
291#endif
292#ifndef PerlIO_stdin
293extern PerlIO * PerlIO_stdin (void);
294#endif
295#ifndef PerlIO_stdout
296extern PerlIO * PerlIO_stdout (void);
297#endif
298#ifndef PerlIO_stderr
299extern PerlIO * PerlIO_stderr (void);
300#endif
301#ifndef PerlIO_getpos
302extern int PerlIO_getpos (PerlIO *,Fpos_t *);
303#endif
304#ifndef PerlIO_setpos
305extern int PerlIO_setpos (PerlIO *,const Fpos_t *);
306#endif
307#ifndef PerlIO_fdupopen
cf829ab0
JH
308#define PerlIO_fdupopen(f) (f)
309/* extern PerlIO * PerlIO_fdupopen (PerlIO *); */
76ced9ad
NIS
310#endif
311#ifndef PerlIO_isutf8
312extern int PerlIO_isutf8 (PerlIO *);
313#endif
156e9b51 314#ifndef PerlIO_apply_layers
60382766
NIS
315extern int PerlIO_apply_layers (pTHX_ PerlIO *f, const char *mode, const char *names);
316#endif
317#ifndef PerlIO_binmode
318extern int PerlIO_binmode (pTHX_ PerlIO *f, int iotype, int omode, const char *names);
ac27b0f5 319#endif
76ced9ad 320
adb71456
NIS
321extern void PerlIO_cleanup(void);
322
88b61e10
NIS
323extern void PerlIO_debug(const char *fmt,...);
324
adb71456
NIS
325END_EXTERN_C
326
76ced9ad 327#endif /* _PERLIO_H */