This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
Microperl tweaks.
[perl5.git] / uconfig.h
CommitLineData
3ebb1980
JH
1/*
2 * This file was produced by running the config_h.SH script, which
3 * gets its values from uconfig.sh, which is generally produced by
4 * running Configure.
5 *
6 * Feel free to modify any of this as the need arises. Note, however,
7 * that running config_h.SH again will wipe out any changes you've made.
8 * For a more permanent change edit uconfig.sh and rerun config_h.SH.
9 *
10 * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
11 */
12
13/*
14 * Package name :
15 * Source directory :
16 * Configuration time:
17 * Configured by :
18 * Target system : unknown
19 */
20
21#ifndef _config_h_
22#define _config_h_
23
24/* LOC_SED:
25 * This symbol holds the complete pathname to the sed program.
26 */
27#define LOC_SED "" /**/
28
29/* HAS_ALARM:
30 * This symbol, if defined, indicates that the alarm routine is
31 * available.
32 */
33/*#define HAS_ALARM / **/
34
35/* HASATTRIBUTE:
36 * This symbol indicates the C compiler can check for function attributes,
37 * such as printf formats. This is normally only supported by GNU cc.
38 */
39/*#define HASATTRIBUTE / **/
40#ifndef HASATTRIBUTE
41#define __attribute__(_arg_)
42#endif
43
44/* HAS_BCMP:
45 * This symbol is defined if the bcmp() routine is available to
46 * compare blocks of memory.
47 */
48/*#define HAS_BCMP / **/
49
50/* HAS_BCOPY:
51 * This symbol is defined if the bcopy() routine is available to
52 * copy blocks of memory.
53 */
54/*#define HAS_BCOPY / **/
55
56/* HAS_BZERO:
57 * This symbol is defined if the bzero() routine is available to
58 * set a memory block to 0.
59 */
60/*#define HAS_BZERO / **/
61
62/* HAS_CHOWN:
63 * This symbol, if defined, indicates that the chown routine is
64 * available.
65 */
66/*#define HAS_CHOWN / **/
67
68/* HAS_CHROOT:
69 * This symbol, if defined, indicates that the chroot routine is
70 * available.
71 */
72/*#define HAS_CHROOT / **/
73
74/* HAS_CHSIZE:
75 * This symbol, if defined, indicates that the chsize routine is available
76 * to truncate files. You might need a -lx to get this routine.
77 */
78/*#define HAS_CHSIZE / **/
79
80/* HASCONST:
81 * This symbol, if defined, indicates that this C compiler knows about
82 * the const type. There is no need to actually test for that symbol
83 * within your programs. The mere use of the "const" keyword will
84 * trigger the necessary tests.
85 */
86/*#define HASCONST / **/
87#ifndef HASCONST
88#define const
89#endif
90
91/* HAS_CRYPT:
92 * This symbol, if defined, indicates that the crypt routine is available
93 * to encrypt passwords and the like.
94 */
95/*#define HAS_CRYPT / **/
96
97/* HAS_CUSERID:
98 * This symbol, if defined, indicates that the cuserid routine is
99 * available to get character login names.
100 */
101/*#define HAS_CUSERID / **/
102
103/* HAS_DBL_DIG:
104 * This symbol, if defined, indicates that this system's <float.h>
105 * or <limits.h> defines the symbol DBL_DIG, which is the number
106 * of significant digits in a double precision number. If this
107 * symbol is not defined, a guess of 15 is usually pretty good.
108 */
109/*#define HAS_DBL_DIG / * */
110
111/* HAS_DIFFTIME:
112 * This symbol, if defined, indicates that the difftime routine is
113 * available.
114 */
115/*#define HAS_DIFFTIME / **/
116
117/* HAS_DLERROR:
118 * This symbol, if defined, indicates that the dlerror routine is
119 * available to return a string describing the last error that
120 * occurred from a call to dlopen(), dlclose() or dlsym().
121 */
122/*#define HAS_DLERROR / **/
123
124/* SETUID_SCRIPTS_ARE_SECURE_NOW:
125 * This symbol, if defined, indicates that the bug that prevents
126 * setuid scripts from being secure is not present in this kernel.
127 */
128/* DOSUID:
129 * This symbol, if defined, indicates that the C program should
130 * check the script that it is executing for setuid/setgid bits, and
131 * attempt to emulate setuid/setgid on systems that have disabled
132 * setuid #! scripts because the kernel can't do it securely.
133 * It is up to the package designer to make sure that this emulation
134 * is done securely. Among other things, it should do an fstat on
135 * the script it just opened to make sure it really is a setuid/setgid
136 * script, it should make sure the arguments passed correspond exactly
137 * to the argument on the #! line, and it should not trust any
138 * subprocesses to which it must pass the filename rather than the
139 * file descriptor of the script to be executed.
140 */
141/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
142/*#define DOSUID / **/
143
144/* HAS_DUP2:
145 * This symbol, if defined, indicates that the dup2 routine is
146 * available to duplicate file descriptors.
147 */
148/*#define HAS_DUP2 / **/
149
150/* HAS_FCHMOD:
151 * This symbol, if defined, indicates that the fchmod routine is available
152 * to change mode of opened files. If unavailable, use chmod().
153 */
154/*#define HAS_FCHMOD / **/
155
156/* HAS_FCHOWN:
157 * This symbol, if defined, indicates that the fchown routine is available
158 * to change ownership of opened files. If unavailable, use chown().
159 */
160/*#define HAS_FCHOWN / **/
161
162/* HAS_FCNTL:
163 * This symbol, if defined, indicates to the C program that
164 * the fcntl() function exists.
165 */
166/*#define HAS_FCNTL / **/
167
168/* HAS_FGETPOS:
169 * This symbol, if defined, indicates that the fgetpos routine is
170 * available to get the file position indicator, similar to ftell().
171 */
172/*#define HAS_FGETPOS / **/
173
174/* HAS_FLOCK:
175 * This symbol, if defined, indicates that the flock routine is
176 * available to do file locking.
177 */
178/*#define HAS_FLOCK / **/
179
180/* HAS_FORK:
181 * This symbol, if defined, indicates that the fork routine is
182 * available.
183 */
184#define HAS_FORK /**/
185
186/* HAS_FSETPOS:
187 * This symbol, if defined, indicates that the fsetpos routine is
188 * available to set the file position indicator, similar to fseek().
189 */
190/*#define HAS_FSETPOS / **/
191
192/* HAS_GETTIMEOFDAY:
193 * This symbol, if defined, indicates that the gettimeofday() system
194 * call is available for a sub-second accuracy clock. Usually, the file
195 * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
196 * The type "Timeval" should be used to refer to "struct timeval".
197 */
198/*#define HAS_GETTIMEOFDAY / **/
199#ifdef HAS_GETTIMEOFDAY
200#define Timeval struct timeval /* Structure used by gettimeofday() */
201#endif
202
203/* HAS_GETGROUPS:
204 * This symbol, if defined, indicates that the getgroups() routine is
205 * available to get the list of process groups. If unavailable, multiple
206 * groups are probably not supported.
207 */
208/*#define HAS_GETGROUPS / **/
209
210/* HAS_GETLOGIN:
211 * This symbol, if defined, indicates that the getlogin routine is
212 * available to get the login name.
213 */
214/*#define HAS_GETLOGIN / **/
215
216/* HAS_GETPGID:
217 * This symbol, if defined, indicates to the C program that
218 * the getpgid(pid) function is available to get the
219 * process group id.
220 */
221/*#define HAS_GETPGID / **/
222
3ebb1980
JH
223/* HAS_GETPGRP2:
224 * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
225 * routine is available to get the current process group.
226 */
227/*#define HAS_GETPGRP2 / **/
228
229/* HAS_GETPPID:
230 * This symbol, if defined, indicates that the getppid routine is
231 * available to get the parent process ID.
232 */
233/*#define HAS_GETPPID / **/
234
235/* HAS_GETPRIORITY:
236 * This symbol, if defined, indicates that the getpriority routine is
237 * available to get a process's priority.
238 */
239/*#define HAS_GETPRIORITY / **/
240
241/* HAS_INET_ATON:
242 * This symbol, if defined, indicates to the C program that the
243 * inet_aton() function is available to parse IP address "dotted-quad"
244 * strings.
245 */
246/*#define HAS_INET_ATON / **/
247
248/* HAS_KILLPG:
249 * This symbol, if defined, indicates that the killpg routine is available
250 * to kill process groups. If unavailable, you probably should use kill
251 * with a negative process number.
252 */
253/*#define HAS_KILLPG / **/
254
255/* HAS_LINK:
256 * This symbol, if defined, indicates that the link routine is
257 * available to create hard links.
258 */
259/*#define HAS_LINK / **/
260
261/* HAS_LOCALECONV:
262 * This symbol, if defined, indicates that the localeconv routine is
263 * available for numeric and monetary formatting conventions.
264 */
265/*#define HAS_LOCALECONV / **/
266
267/* HAS_LOCKF:
268 * This symbol, if defined, indicates that the lockf routine is
269 * available to do file locking.
270 */
271/*#define HAS_LOCKF / **/
272
273/* HAS_LSTAT:
274 * This symbol, if defined, indicates that the lstat routine is
275 * available to do file stats on symbolic links.
276 */
277/*#define HAS_LSTAT / **/
278
279/* HAS_MBLEN:
280 * This symbol, if defined, indicates that the mblen routine is available
281 * to find the number of bytes in a multibye character.
282 */
283/*#define HAS_MBLEN / **/
284
285/* HAS_MBSTOWCS:
286 * This symbol, if defined, indicates that the mbstowcs routine is
287 * available to covert a multibyte string into a wide character string.
288 */
289/*#define HAS_MBSTOWCS / **/
290
291/* HAS_MBTOWC:
292 * This symbol, if defined, indicates that the mbtowc routine is available
293 * to covert a multibyte to a wide character.
294 */
295/*#define HAS_MBTOWC / **/
296
297/* HAS_MEMCMP:
298 * This symbol, if defined, indicates that the memcmp routine is available
299 * to compare blocks of memory.
300 */
301/*#define HAS_MEMCMP / **/
302
303/* HAS_MEMCPY:
304 * This symbol, if defined, indicates that the memcpy routine is available
305 * to copy blocks of memory.
306 */
307/*#define HAS_MEMCPY / **/
308
309/* HAS_MEMMOVE:
310 * This symbol, if defined, indicates that the memmove routine is available
311 * to copy potentially overlapping blocks of memory. This should be used
312 * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
313 * own version.
314 */
315/*#define HAS_MEMMOVE / **/
316
317/* HAS_MEMSET:
318 * This symbol, if defined, indicates that the memset routine is available
319 * to set blocks of memory.
320 */
321/*#define HAS_MEMSET / **/
322
323/* HAS_MKDIR:
324 * This symbol, if defined, indicates that the mkdir routine is available
325 * to create directories. Otherwise you should fork off a new process to
326 * exec /bin/mkdir.
327 */
328/*#define HAS_MKDIR / **/
329
330/* HAS_MKFIFO:
331 * This symbol, if defined, indicates that the mkfifo routine is
332 * available to create FIFOs. Otherwise, mknod should be able to
333 * do it for you. However, if mkfifo is there, mknod might require
334 * super-user privileges which mkfifo will not.
335 */
336/*#define HAS_MKFIFO / **/
337
338/* HAS_MKTIME:
339 * This symbol, if defined, indicates that the mktime routine is
340 * available.
341 */
342/*#define HAS_MKTIME / **/
343
344/* HAS_MSYNC:
345 * This symbol, if defined, indicates that the msync system call is
346 * available to synchronize a mapped file.
347 */
348/*#define HAS_MSYNC / **/
349
350/* HAS_MUNMAP:
351 * This symbol, if defined, indicates that the munmap system call is
352 * available to unmap a region, usually mapped by mmap().
353 */
354/*#define HAS_MUNMAP / **/
355
356/* HAS_NICE:
357 * This symbol, if defined, indicates that the nice routine is
358 * available.
359 */
360/*#define HAS_NICE / **/
361
362/* HAS_PATHCONF:
363 * This symbol, if defined, indicates that pathconf() is available
364 * to determine file-system related limits and options associated
365 * with a given filename.
366 */
367/* HAS_FPATHCONF:
368 * This symbol, if defined, indicates that pathconf() is available
369 * to determine file-system related limits and options associated
370 * with a given open file descriptor.
371 */
372/*#define HAS_PATHCONF / **/
373/*#define HAS_FPATHCONF / **/
374
375/* HAS_PAUSE:
376 * This symbol, if defined, indicates that the pause routine is
377 * available to suspend a process until a signal is received.
378 */
379/*#define HAS_PAUSE / **/
380
381/* HAS_PIPE:
382 * This symbol, if defined, indicates that the pipe routine is
383 * available to create an inter-process channel.
384 */
385/*#define HAS_PIPE / **/
386
387/* HAS_POLL:
388 * This symbol, if defined, indicates that the poll routine is
389 * available to poll active file descriptors. You may safely
390 * include <poll.h> when this symbol is defined.
391 */
392/*#define HAS_POLL / **/
393
394/* HAS_READDIR:
395 * This symbol, if defined, indicates that the readdir routine is
396 * available to read directory entries. You may have to include
397 * <dirent.h>. See I_DIRENT.
398 */
399/*#define HAS_READDIR / **/
400
401/* HAS_SEEKDIR:
402 * This symbol, if defined, indicates that the seekdir routine is
403 * available. You may have to include <dirent.h>. See I_DIRENT.
404 */
405/*#define HAS_SEEKDIR / **/
406
407/* HAS_TELLDIR:
408 * This symbol, if defined, indicates that the telldir routine is
409 * available. You may have to include <dirent.h>. See I_DIRENT.
410 */
411/*#define HAS_TELLDIR / **/
412
413/* HAS_REWINDDIR:
414 * This symbol, if defined, indicates that the rewinddir routine is
415 * available. You may have to include <dirent.h>. See I_DIRENT.
416 */
417/*#define HAS_REWINDDIR / **/
418
419/* HAS_READLINK:
420 * This symbol, if defined, indicates that the readlink routine is
421 * available to read the value of a symbolic link.
422 */
423/*#define HAS_READLINK / **/
424
425/* HAS_RENAME:
426 * This symbol, if defined, indicates that the rename routine is available
427 * to rename files. Otherwise you should do the unlink(), link(), unlink()
428 * trick.
429 */
430/*#define HAS_RENAME / **/
431
432/* HAS_RMDIR:
433 * This symbol, if defined, indicates that the rmdir routine is
434 * available to remove directories. Otherwise you should fork off a
435 * new process to exec /bin/rmdir.
436 */
437/*#define HAS_RMDIR / **/
438
439/* HAS_SELECT:
440 * This symbol, if defined, indicates that the select routine is
441 * available to select active file descriptors. If the timeout field
442 * is used, <sys/time.h> may need to be included.
443 */
444/*#define HAS_SELECT / **/
445
446/* HAS_SETEGID:
447 * This symbol, if defined, indicates that the setegid routine is available
448 * to change the effective gid of the current program.
449 */
450/*#define HAS_SETEGID / **/
451
452/* HAS_SETEUID:
453 * This symbol, if defined, indicates that the seteuid routine is available
454 * to change the effective uid of the current program.
455 */
456/*#define HAS_SETEUID / **/
457
458/* HAS_SETLINEBUF:
459 * This symbol, if defined, indicates that the setlinebuf routine is
460 * available to change stderr or stdout from block-buffered or unbuffered
461 * to a line-buffered mode.
462 */
463/*#define HAS_SETLINEBUF / **/
464
465/* HAS_SETLOCALE:
466 * This symbol, if defined, indicates that the setlocale routine is
467 * available to handle locale-specific ctype implementations.
468 */
469/*#define HAS_SETLOCALE / **/
470
471/* HAS_SETPGID:
472 * This symbol, if defined, indicates that the setpgid(pid, gpid)
473 * routine is available to set process group ID.
474 */
475/*#define HAS_SETPGID / **/
476
3ebb1980
JH
477/* HAS_SETPGRP2:
478 * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
479 * routine is available to set the current process group.
480 */
481/*#define HAS_SETPGRP2 / **/
482
483/* HAS_SETPRIORITY:
484 * This symbol, if defined, indicates that the setpriority routine is
485 * available to set a process's priority.
486 */
487/*#define HAS_SETPRIORITY / **/
488
489/* HAS_SETREGID:
490 * This symbol, if defined, indicates that the setregid routine is
491 * available to change the real and effective gid of the current
492 * process.
493 */
494/* HAS_SETRESGID:
495 * This symbol, if defined, indicates that the setresgid routine is
496 * available to change the real, effective and saved gid of the current
497 * process.
498 */
499/*#define HAS_SETREGID / **/
500/*#define HAS_SETRESGID / **/
501
502/* HAS_SETREUID:
503 * This symbol, if defined, indicates that the setreuid routine is
504 * available to change the real and effective uid of the current
505 * process.
506 */
507/* HAS_SETRESUID:
508 * This symbol, if defined, indicates that the setresuid routine is
509 * available to change the real, effective and saved uid of the current
510 * process.
511 */
512/*#define HAS_SETREUID / **/
513/*#define HAS_SETRESUID / **/
514
515/* HAS_SETRGID:
516 * This symbol, if defined, indicates that the setrgid routine is available
517 * to change the real gid of the current program.
518 */
519/*#define HAS_SETRGID / **/
520
521/* HAS_SETRUID:
522 * This symbol, if defined, indicates that the setruid routine is available
523 * to change the real uid of the current program.
524 */
525/*#define HAS_SETRUID / **/
526
527/* HAS_SETSID:
528 * This symbol, if defined, indicates that the setsid routine is
529 * available to set the process group ID.
530 */
531/*#define HAS_SETSID / **/
532
533/* Shmat_t:
534 * This symbol holds the return type of the shmat() system call.
535 * Usually set to 'void *' or 'char *'.
536 */
537/* HAS_SHMAT_PROTOTYPE:
538 * This symbol, if defined, indicates that the sys/shm.h includes
539 * a prototype for shmat(). Otherwise, it is up to the program to
540 * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
541 * but not always right so it should be emitted by the program only
542 * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
543 */
544#define Shmat_t void * /**/
545/*#define HAS_SHMAT_PROTOTYPE / **/
546
547/* HAS_STRCHR:
548 * This symbol is defined to indicate that the strchr()/strrchr()
549 * functions are available for string searching. If not, try the
550 * index()/rindex() pair.
551 */
552/* HAS_INDEX:
553 * This symbol is defined to indicate that the index()/rindex()
554 * functions are available for string searching.
555 */
556/*#define HAS_STRCHR / **/
557/*#define HAS_INDEX / **/
558
559/* HAS_STRCOLL:
560 * This symbol, if defined, indicates that the strcoll routine is
561 * available to compare strings using collating information.
562 */
563/*#define HAS_STRCOLL / **/
564
565/* USE_STRUCT_COPY:
566 * This symbol, if defined, indicates that this C compiler knows how
567 * to copy structures. If undefined, you'll need to use a block copy
568 * routine of some sort instead.
569 */
570/*#define USE_STRUCT_COPY / **/
571
572/* HAS_STRTOD:
573 * This symbol, if defined, indicates that the strtod routine is
574 * available to provide better numeric string conversion than atof().
575 */
576/*#define HAS_STRTOD / **/
577
578/* HAS_STRTOL:
579 * This symbol, if defined, indicates that the strtol routine is available
580 * to provide better numeric string conversion than atoi() and friends.
581 */
582/*#define HAS_STRTOL / **/
583
3ebb1980
JH
584/* HAS_STRXFRM:
585 * This symbol, if defined, indicates that the strxfrm() routine is
586 * available to transform strings.
587 */
588/*#define HAS_STRXFRM / **/
589
590/* HAS_SYMLINK:
591 * This symbol, if defined, indicates that the symlink routine is available
592 * to create symbolic links.
593 */
594/*#define HAS_SYMLINK / **/
595
596/* HAS_SYSCALL:
597 * This symbol, if defined, indicates that the syscall routine is
598 * available to call arbitrary system calls. If undefined, that's tough.
599 */
600/*#define HAS_SYSCALL / **/
601
602/* HAS_SYSCONF:
603 * This symbol, if defined, indicates that sysconf() is available
604 * to determine system related limits and options.
605 */
606/*#define HAS_SYSCONF / **/
607
608/* HAS_SYSTEM:
609 * This symbol, if defined, indicates that the system routine is
610 * available to issue a shell command.
611 */
612/*#define HAS_SYSTEM / **/
613
614/* HAS_TCGETPGRP:
615 * This symbol, if defined, indicates that the tcgetpgrp routine is
616 * available to get foreground process group ID.
617 */
618/*#define HAS_TCGETPGRP / **/
619
620/* HAS_TCSETPGRP:
621 * This symbol, if defined, indicates that the tcsetpgrp routine is
622 * available to set foreground process group ID.
623 */
624/*#define HAS_TCSETPGRP / **/
625
626/* HAS_TRUNCATE:
627 * This symbol, if defined, indicates that the truncate routine is
628 * available to truncate files.
629 */
630/*#define HAS_TRUNCATE / **/
631
632/* HAS_TZNAME:
633 * This symbol, if defined, indicates that the tzname[] array is
634 * available to access timezone names.
635 */
636/*#define HAS_TZNAME / **/
637
638/* HAS_UMASK:
639 * This symbol, if defined, indicates that the umask routine is
640 * available to set and get the value of the file creation mask.
641 */
642/*#define HAS_UMASK / **/
643
4e0554ec
JH
644/* HAS_USLEEP:
645 * This symbol, if defined, indicates that the usleep routine is
646 * available to let the process sleep on a sub-second accuracy.
647 */
648/*#define HAS_USLEEP / **/
649
3ebb1980
JH
650/* HASVOLATILE:
651 * This symbol, if defined, indicates that this C compiler knows about
652 * the volatile declaration.
653 */
654/*#define HASVOLATILE / **/
655#ifndef HASVOLATILE
656#define volatile
657#endif
658
659/* HAS_WAIT4:
660 * This symbol, if defined, indicates that wait4() exists.
661 */
662/*#define HAS_WAIT4 / **/
663
664/* HAS_WAITPID:
665 * This symbol, if defined, indicates that the waitpid routine is
666 * available to wait for child process.
667 */
668/*#define HAS_WAITPID / **/
669
670/* HAS_WCSTOMBS:
671 * This symbol, if defined, indicates that the wcstombs routine is
672 * available to convert wide character strings to multibyte strings.
673 */
674/*#define HAS_WCSTOMBS / **/
675
676/* HAS_WCTOMB:
677 * This symbol, if defined, indicates that the wctomb routine is available
678 * to covert a wide character to a multibyte.
679 */
680/*#define HAS_WCTOMB / **/
681
682/* I_ARPA_INET:
683 * This symbol, if defined, indicates to the C program that it should
684 * include <arpa/inet.h> to get inet_addr and friends declarations.
685 */
686/*#define I_ARPA_INET / **/
687
688/* I_DBM:
689 * This symbol, if defined, indicates that <dbm.h> exists and should
690 * be included.
691 */
692/* I_RPCSVC_DBM:
693 * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
694 * should be included.
695 */
696/*#define I_DBM / **/
697/*#define I_RPCSVC_DBM / **/
698
699/* I_DIRENT:
700 * This symbol, if defined, indicates to the C program that it should
701 * include <dirent.h>. Using this symbol also triggers the definition
702 * of the Direntry_t define which ends up being 'struct dirent' or
703 * 'struct direct' depending on the availability of <dirent.h>.
704 */
705/* DIRNAMLEN:
706 * This symbol, if defined, indicates to the C program that the length
707 * of directory entry names is provided by a d_namlen field. Otherwise
708 * you need to do strlen() on the d_name field.
709 */
710/* Direntry_t:
711 * This symbol is set to 'struct direct' or 'struct dirent' depending on
712 * whether dirent is available or not. You should use this pseudo type to
713 * portably declare your directory entries.
714 */
715/*#define I_DIRENT / **/
716/*#define DIRNAMLEN / **/
717#define Direntry_t struct dirent
718
719/* I_DLFCN:
720 * This symbol, if defined, indicates that <dlfcn.h> exists and should
721 * be included.
722 */
723/*#define I_DLFCN / **/
724
725/* I_FCNTL:
726 * This manifest constant tells the C program to include <fcntl.h>.
727 */
728/*#define I_FCNTL / **/
729
730/* I_FLOAT:
731 * This symbol, if defined, indicates to the C program that it should
732 * include <float.h> to get definition of symbols like DBL_MAX or
733 * DBL_MIN, i.e. machine dependent floating point values.
734 */
735/*#define I_FLOAT / **/
736
737/* I_LIMITS:
738 * This symbol, if defined, indicates to the C program that it should
739 * include <limits.h> to get definition of symbols like WORD_BIT or
740 * LONG_MAX, i.e. machine dependant limitations.
741 */
742/*#define I_LIMITS / **/
743
744/* I_LOCALE:
745 * This symbol, if defined, indicates to the C program that it should
746 * include <locale.h>.
747 */
748/*#define I_LOCALE / **/
749
750/* I_MATH:
751 * This symbol, if defined, indicates to the C program that it should
752 * include <math.h>.
753 */
251f6efd 754#define I_MATH /**/
3ebb1980
JH
755
756/* I_MEMORY:
757 * This symbol, if defined, indicates to the C program that it should
758 * include <memory.h>.
759 */
760/*#define I_MEMORY / **/
761
762/* I_NDBM:
763 * This symbol, if defined, indicates that <ndbm.h> exists and should
764 * be included.
765 */
766/*#define I_NDBM / **/
767
768/* I_NET_ERRNO:
769 * This symbol, if defined, indicates that <net/errno.h> exists and
770 * should be included.
771 */
772/*#define I_NET_ERRNO / **/
773
774/* I_NETINET_IN:
775 * This symbol, if defined, indicates to the C program that it should
776 * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
777 */
778/*#define I_NETINET_IN / **/
779
780/* I_SFIO:
781 * This symbol, if defined, indicates to the C program that it should
782 * include <sfio.h>.
783 */
784/*#define I_SFIO / **/
785
786/* I_STDDEF:
787 * This symbol, if defined, indicates that <stddef.h> exists and should
788 * be included.
789 */
790/*#define I_STDDEF / **/
791
792/* I_STDLIB:
793 * This symbol, if defined, indicates that <stdlib.h> exists and should
794 * be included.
795 */
796/*#define I_STDLIB / **/
797
798/* I_STRING:
799 * This symbol, if defined, indicates to the C program that it should
800 * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
801 */
802#define I_STRING /**/
803
804/* I_SYS_DIR:
805 * This symbol, if defined, indicates to the C program that it should
806 * include <sys/dir.h>.
807 */
808/*#define I_SYS_DIR / **/
809
810/* I_SYS_FILE:
811 * This symbol, if defined, indicates to the C program that it should
812 * include <sys/file.h> to get definition of R_OK and friends.
813 */
814/*#define I_SYS_FILE / **/
815
816/* I_SYS_IOCTL:
817 * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
818 * be included. Otherwise, include <sgtty.h> or <termio.h>.
819 */
49a78c82
JH
820/* I_SYS_SOCKIO:
821 * This symbol, if defined, indicates the <sys/sockio.h> should be included
822 * to get socket ioctl options, like SIOCATMARK.
823 */
3ebb1980 824/*#define I_SYS_IOCTL / **/
49a78c82 825/*#define I_SYS_SOCKIO / **/
3ebb1980
JH
826
827/* I_SYS_NDIR:
828 * This symbol, if defined, indicates to the C program that it should
829 * include <sys/ndir.h>.
830 */
831/*#define I_SYS_NDIR / **/
832
833/* I_SYS_PARAM:
834 * This symbol, if defined, indicates to the C program that it should
835 * include <sys/param.h>.
836 */
837/*#define I_SYS_PARAM / **/
838
839/* I_SYS_RESOURCE:
840 * This symbol, if defined, indicates to the C program that it should
841 * include <sys/resource.h>.
842 */
843/*#define I_SYS_RESOURCE / **/
844
845/* I_SYS_SELECT:
846 * This symbol, if defined, indicates to the C program that it should
847 * include <sys/select.h> in order to get definition of struct timeval.
848 */
849/*#define I_SYS_SELECT / **/
850
851/* I_SYS_STAT:
852 * This symbol, if defined, indicates to the C program that it should
853 * include <sys/stat.h>.
854 */
855#define I_SYS_STAT /**/
856
857/* I_SYS_TIMES:
858 * This symbol, if defined, indicates to the C program that it should
859 * include <sys/times.h>.
860 */
861/*#define I_SYS_TIMES / **/
862
863/* I_SYS_TYPES:
864 * This symbol, if defined, indicates to the C program that it should
865 * include <sys/types.h>.
866 */
867/*#define I_SYS_TYPES / **/
868
869/* I_SYS_UN:
870 * This symbol, if defined, indicates to the C program that it should
871 * include <sys/un.h> to get UNIX domain socket definitions.
872 */
873/*#define I_SYS_UN / **/
874
875/* I_SYS_WAIT:
876 * This symbol, if defined, indicates to the C program that it should
877 * include <sys/wait.h>.
878 */
879/*#define I_SYS_WAIT / **/
880
881/* I_TERMIO:
882 * This symbol, if defined, indicates that the program should include
883 * <termio.h> rather than <sgtty.h>. There are also differences in
884 * the ioctl() calls that depend on the value of this symbol.
885 */
886/* I_TERMIOS:
887 * This symbol, if defined, indicates that the program should include
888 * the POSIX termios.h rather than sgtty.h or termio.h.
889 * There are also differences in the ioctl() calls that depend on the
890 * value of this symbol.
891 */
892/* I_SGTTY:
893 * This symbol, if defined, indicates that the program should include
894 * <sgtty.h> rather than <termio.h>. There are also differences in
895 * the ioctl() calls that depend on the value of this symbol.
896 */
897/*#define I_TERMIO / **/
898/*#define I_TERMIOS / **/
899/*#define I_SGTTY / **/
900
901/* I_UNISTD:
902 * This symbol, if defined, indicates to the C program that it should
903 * include <unistd.h>.
904 */
905/*#define I_UNISTD / **/
906
907/* I_UTIME:
908 * This symbol, if defined, indicates to the C program that it should
909 * include <utime.h>.
910 */
911/*#define I_UTIME / **/
912
913/* I_VALUES:
914 * This symbol, if defined, indicates to the C program that it should
915 * include <values.h> to get definition of symbols like MINFLOAT or
916 * MAXLONG, i.e. machine dependant limitations. Probably, you
917 * should use <limits.h> instead, if it is available.
918 */
919/*#define I_VALUES / **/
920
921/* I_STDARG:
922 * This symbol, if defined, indicates that <stdarg.h> exists and should
923 * be included.
924 */
925/* I_VARARGS:
926 * This symbol, if defined, indicates to the C program that it should
927 * include <varargs.h>.
928 */
929#define I_STDARG /**/
930/*#define I_VARARGS / **/
931
932/* I_VFORK:
933 * This symbol, if defined, indicates to the C program that it should
934 * include vfork.h.
935 */
936/*#define I_VFORK / **/
937
938/* CAN_PROTOTYPE:
939 * If defined, this macro indicates that the C compiler can handle
940 * function prototypes.
941 */
942/* _:
943 * This macro is used to declare function parameters for folks who want
944 * to make declarations with prototypes using a different style than
945 * the above macros. Use double parentheses. For example:
946 *
947 * int main _((int argc, char *argv[]));
948 */
949/*#define CAN_PROTOTYPE / **/
950#ifdef CAN_PROTOTYPE
951#define _(args) args
952#else
953#define _(args) ()
954#endif
955
956/* SH_PATH:
957 * This symbol contains the full pathname to the shell used on this
958 * on this system to execute Bourne shell scripts. Usually, this will be
959 * /bin/sh, though it's possible that some systems will have /bin/ksh,
960 * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
961 * D:/bin/sh.exe.
962 */
963#define SH_PATH "" /**/
964
3ebb1980
JH
965/* CROSSCOMPILE:
966 * This symbol, if defined, signifies that we our
967 * build process is a cross-compilation.
968 */
969/*#define CROSSCOMPILE / **/
970
971/* INTSIZE:
972 * This symbol contains the value of sizeof(int) so that the C
973 * preprocessor can make decisions based on it.
974 */
975/* LONGSIZE:
976 * This symbol contains the value of sizeof(long) so that the C
977 * preprocessor can make decisions based on it.
978 */
979/* SHORTSIZE:
980 * This symbol contains the value of sizeof(short) so that the C
981 * preprocessor can make decisions based on it.
982 */
983#define INTSIZE 1 /**/
a24ffc0b 984#define LONGSIZE 4 /**/
3ebb1980
JH
985#define SHORTSIZE 1 /**/
986
987/* MULTIARCH:
988 * This symbol, if defined, signifies that the build
989 * process will produce some binary files that are going to be
990 * used in a cross-platform environment. This is the case for
991 * example with the NeXT "fat" binaries that contain executables
992 * for several CPUs.
993 */
994/*#define MULTIARCH / **/
995
996/* HAS_QUAD:
997 * This symbol, if defined, tells that there's a 64-bit integer type,
998 * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
999 * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
1000 */
1001/*#define HAS_QUAD / **/
1002#ifdef HAS_QUAD
1003# define Quad_t int64_t /**/
1004# define Uquad_t uint64_t /**/
1005# define QUADKIND 4 /**/
1006# define QUAD_IS_INT 1
1007# define QUAD_IS_LONG 2
1008# define QUAD_IS_LONG_LONG 3
1009# define QUAD_IS_INT64_T 4
1010#endif
1011
1012/* HAS_ACCESSX:
1013 * This symbol, if defined, indicates that the accessx routine is
1014 * available to do extended access checks.
1015 */
1016/*#define HAS_ACCESSX / **/
1017
1018/* HAS_EACCESS:
1019 * This symbol, if defined, indicates that the eaccess routine is
1020 * available to do extended access checks.
1021 */
1022/*#define HAS_EACCESS / **/
1023
1024/* I_SYS_ACCESS:
1025 * This symbol, if defined, indicates to the C program that it should
1026 * include <sys/access.h>.
1027 */
1028/*#define I_SYS_ACCESS / **/
1029
1030/* I_SYS_SECURITY:
1031 * This symbol, if defined, indicates to the C program that it should
1032 * include <sys/security.h>.
1033 */
1034/*#define I_SYS_SECURITY / **/
1035
1036/* OSNAME:
1037 * This symbol contains the name of the operating system, as determined
1038 * by Configure. You shouldn't rely on it too much; the specific
1039 * feature tests from Configure are generally more reliable.
1040 */
a24ffc0b
JH
1041/* OSVERS:
1042 * This symbol contains the version of the operating system, as determined
1043 * by Configure. You shouldn't rely on it too much; the specific
1044 * feature tests from Configure are generally more reliable.
1045 */
3ebb1980 1046#define OSNAME "unknown" /**/
a24ffc0b 1047#define OSVERS "" /**/
3ebb1980
JH
1048
1049/* MEM_ALIGNBYTES:
1050 * This symbol contains the number of bytes required to align a
1051 * double, or a long double when applicable. Usual values are 2,
1052 * 4 and 8. The default is eight, for safety.
1053 */
1054#if defined(CROSSCOMPILE) || defined(MULTIARCH)
1055# define MEM_ALIGNBYTES 8
1056#else
1057#define MEM_ALIGNBYTES 4
1058#endif
1059
1060/* ARCHLIB:
1061 * This variable, if defined, holds the name of the directory in
1062 * which the user wants to put architecture-dependent public
1063 * library files for . It is most often a local directory
1064 * such as /usr/local/lib. Programs using this variable must be
1065 * prepared to deal with filename expansion. If ARCHLIB is the
1066 * same as PRIVLIB, it is not defined, since presumably the
1067 * program already searches PRIVLIB.
1068 */
1069/* ARCHLIB_EXP:
1070 * This symbol contains the ~name expanded version of ARCHLIB, to be used
1071 * in programs that are not prepared to deal with ~ expansion at run-time.
1072 */
ef71a6f5
JH
1073/*#define ARCHLIB "/usr/local/lib/perl5/5.7/unknown" / **/
1074/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.7/unknown" / **/
3ebb1980
JH
1075
1076/* ARCHNAME:
1077 * This symbol holds a string representing the architecture name.
1078 * It may be used to construct an architecture-dependant pathname
1079 * where library files may be held under a private library, for
1080 * instance.
1081 */
1082#define ARCHNAME "unknown" /**/
1083
1084/* HAS_ATOLF:
1085 * This symbol, if defined, indicates that the atolf routine is
1086 * available to convert strings into long doubles.
1087 */
1088/*#define HAS_ATOLF / **/
1089
1090/* HAS_ATOLL:
1091 * This symbol, if defined, indicates that the atoll routine is
1092 * available to convert strings into long longs.
1093 */
1094/*#define HAS_ATOLL / **/
1095
1096/* BIN:
1097 * This symbol holds the path of the bin directory where the package will
1098 * be installed. Program must be prepared to deal with ~name substitution.
1099 */
1100/* BIN_EXP:
1101 * This symbol is the filename expanded version of the BIN symbol, for
1102 * programs that do not want to deal with that at run-time.
1103 */
1104#define BIN "/usr/local/bin" /**/
1105#define BIN_EXP "" /**/
1106
1107/* PERL_BINCOMPAT_5005:
1108 * This symbol, if defined, indicates that this version of Perl should be
1109 * binary-compatible with Perl 5.005. This is impossible for builds
1110 * that use features like threads and multiplicity it is always
1111 * for those versions.
1112 */
1113/*#define PERL_BINCOMPAT_5005 / **/
1114
1115/* BYTEORDER:
1116 * This symbol holds the hexadecimal constant defined in byteorder,
1117 * i.e. 0x1234 or 0x4321, etc...
1118 * If the compiler supports cross-compiling or multiple-architecture
1119 * binaries (eg. on NeXT systems), use compiler-defined macros to
1120 * determine the byte order.
1121 * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
1122 * Binaries (MAB) on either big endian or little endian machines.
1123 * The endian-ness is available at compile-time. This only matters
1124 * for perl, where the config.h can be generated and installed on
1125 * one system, and used by a different architecture to build an
1126 * extension. Older versions of NeXT that might not have
1127 * defined either *_ENDIAN__ were all on Motorola 680x0 series,
1128 * so the default case (for NeXT) is big endian to catch them.
1129 * This might matter for NeXT 3.0.
1130 */
1131#if defined(CROSSCOMPILE) || defined(MULTIARCH)
1132# ifdef __LITTLE_ENDIAN__
1133# if LONGSIZE == 4
1134# define BYTEORDER 0x1234
1135# else
1136# if LONGSIZE == 8
1137# define BYTEORDER 0x12345678
1138# endif
1139# endif
1140# else
1141# ifdef __BIG_ENDIAN__
1142# if LONGSIZE == 4
1143# define BYTEORDER 0x4321
1144# else
1145# if LONGSIZE == 8
1146# define BYTEORDER 0x87654321
1147# endif
1148# endif
1149# endif
1150# endif
1151# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
1152# define BYTEORDER 0x4321
1153# endif
1154#else
a24ffc0b 1155#define BYTEORDER 0x1234 /* large digits for MSB */
3ebb1980
JH
1156#endif /* NeXT */
1157
1158/* CAT2:
1159 * This macro catenates 2 tokens together.
1160 */
1161/* STRINGIFY:
1162 * This macro surrounds its token with double quotes.
1163 */
1164#if 42 == 1
fc92a0ee
JH
1165#define CAT2(a,b) a/**/b
1166#define STRINGIFY(a) "a"
3ebb1980
JH
1167 /* If you can get stringification with catify, tell me how! */
1168#endif
1169#if 42 == 42
fc92a0ee
JH
1170#define PeRl_CaTiFy(a, b) a ## b
1171#define PeRl_StGiFy(a) #a
3ebb1980
JH
1172/* the additional level of indirection enables these macros to be
1173 * used as arguments to other macros. See K&R 2nd ed., page 231. */
fc92a0ee
JH
1174#define CAT2(a,b) PeRl_CaTiFy(a,b)
1175#define StGiFy(a) PeRl_StGiFy(a)
1176#define STRINGIFY(a) PeRl_StGiFy(a)
3ebb1980
JH
1177#endif
1178#if 42 != 1 && 42 != 42
1179# include "Bletch: How does this C preprocessor catenate tokens?"
1180#endif
1181
1182/* CPPSTDIN:
1183 * This symbol contains the first part of the string which will invoke
1184 * the C preprocessor on the standard input and produce to standard
1185 * output. Typical value of "cc -E" or "/lib/cpp", but it can also
1186 * call a wrapper. See CPPRUN.
1187 */
1188/* CPPMINUS:
1189 * This symbol contains the second part of the string which will invoke
1190 * the C preprocessor on the standard input and produce to standard
1191 * output. This symbol will have the value "-" if CPPSTDIN needs a minus
1192 * to specify standard input, otherwise the value is "".
1193 */
1194/* CPPRUN:
1195 * This symbol contains the string which will invoke a C preprocessor on
1196 * the standard input and produce to standard output. It needs to end
1197 * with CPPLAST, after all other preprocessor flags have been specified.
1198 * The main difference with CPPSTDIN is that this program will never be a
1199 * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
1200 * available directly to the user. Note that it may well be different from
1201 * the preprocessor used to compile the C program.
1202 */
1203/* CPPLAST:
1204 * This symbol is intended to be used along with CPPRUN in the same manner
1205 * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
1206 */
1207#define CPPSTDIN ""
1208#define CPPMINUS ""
1209#define CPPRUN ""
1210#define CPPLAST ""
1211
a7fea17f
JH
1212/* HAS__FWALK:
1213 * This symbol, if defined, indicates that the _fwalk system call is
1214 * available to apply a function to all the file handles.
1215 */
1216/*#define HAS__FWALK / **/
1217
3ebb1980
JH
1218/* HAS_ACCESS:
1219 * This manifest constant lets the C program know that the access()
1220 * system call is available to check for accessibility using real UID/GID.
1221 * (always present on UNIX.)
1222 */
1223/*#define HAS_ACCESS / **/
1224
1225/* CASTI32:
1226 * This symbol is defined if the C compiler can cast negative
1227 * or large floating point numbers to 32-bit ints.
1228 */
1229/*#define CASTI32 / **/
1230
1231/* CASTNEGFLOAT:
1232 * This symbol is defined if the C compiler can cast negative
1233 * numbers to unsigned longs, ints and shorts.
1234 */
1235/* CASTFLAGS:
1236 * This symbol contains flags that say what difficulties the compiler
1237 * has casting odd floating values to unsigned long:
1238 * 0 = ok
1239 * 1 = couldn't cast < 0
1240 * 2 = couldn't cast >= 0x80000000
1241 * 4 = couldn't cast in argument expression list
1242 */
1243/*#define CASTNEGFLOAT / **/
1244#define CASTFLAGS 0 /**/
1245
1246/* VOID_CLOSEDIR:
1247 * This symbol, if defined, indicates that the closedir() routine
1248 * does not return a value.
1249 */
1250/*#define VOID_CLOSEDIR / **/
1251
4e0554ec
JH
1252/* HAS_STRUCT_CMSGHDR:
1253 * This symbol, if defined, indicates that the struct cmsghdr
1254 * is supported.
1255 */
1256/*#define HAS_STRUCT_CMSGHDR / **/
1257
3ebb1980
JH
1258/* HAS_CSH:
1259 * This symbol, if defined, indicates that the C-shell exists.
1260 */
1261/* CSH:
1262 * This symbol, if defined, contains the full pathname of csh.
1263 */
1264/*#define HAS_CSH / **/
1265#ifdef HAS_CSH
1266#define CSH "" /**/
1267#endif
1268
1269/* DLSYM_NEEDS_UNDERSCORE:
1270 * This symbol, if defined, indicates that we need to prepend an
1271 * underscore to the symbol name before calling dlsym(). This only
1272 * makes sense if you *have* dlsym, which we will presume is the
1273 * case if you're using dl_dlopen.xs.
1274 */
1275/*#define DLSYM_NEEDS_UNDERSCORE / **/
1276
1277/* HAS_DRAND48_PROTO:
1278 * This symbol, if defined, indicates that the system provides
1279 * a prototype for the drand48() function. Otherwise, it is up
1280 * to the program to supply one. A good guess is
1281 * extern double drand48 _((void));
1282 */
1283/*#define HAS_DRAND48_PROTO / **/
1284
1285/* HAS_ENDGRENT:
1286 * This symbol, if defined, indicates that the getgrent routine is
1287 * available for finalizing sequential access of the group database.
1288 */
1289/*#define HAS_ENDGRENT / **/
1290
1291/* HAS_ENDHOSTENT:
1292 * This symbol, if defined, indicates that the endhostent() routine is
1293 * available to close whatever was being used for host queries.
1294 */
1295/*#define HAS_ENDHOSTENT / **/
1296
1297/* HAS_ENDNETENT:
1298 * This symbol, if defined, indicates that the endnetent() routine is
1299 * available to close whatever was being used for network queries.
1300 */
1301/*#define HAS_ENDNETENT / **/
1302
1303/* HAS_ENDPROTOENT:
1304 * This symbol, if defined, indicates that the endprotoent() routine is
1305 * available to close whatever was being used for protocol queries.
1306 */
1307/*#define HAS_ENDPROTOENT / **/
1308
1309/* HAS_ENDPWENT:
1310 * This symbol, if defined, indicates that the getgrent routine is
1311 * available for finalizing sequential access of the passwd database.
1312 */
1313/*#define HAS_ENDPWENT / **/
1314
1315/* HAS_ENDSERVENT:
1316 * This symbol, if defined, indicates that the endservent() routine is
1317 * available to close whatever was being used for service queries.
1318 */
1319/*#define HAS_ENDSERVENT / **/
1320
a7fea17f
JH
1321/* FCNTL_CAN_LOCK:
1322 * This symbol, if defined, indicates that fcntl() can be used
1323 * for file locking. Normally on Unix systems this is defined.
1324 * It may be undefined on VMS.
1325 */
1326/*#define FCNTL_CAN_LOCK / **/
1327
3ebb1980
JH
1328/* HAS_FD_SET:
1329 * This symbol, when defined, indicates presence of the fd_set typedef
1330 * in <sys/types.h>
1331 */
1332/*#define HAS_FD_SET / **/
1333
1334/* FLEXFILENAMES:
1335 * This symbol, if defined, indicates that the system supports filenames
1336 * longer than 14 characters.
1337 */
1338/*#define FLEXFILENAMES / **/
1339
1340/* HAS_FPOS64_T:
1341 * This symbol will be defined if the C compiler supports fpos64_t.
1342 */
1343/*#define HAS_FPOS64_T / **/
1344
1345/* HAS_FREXPL:
1346 * This symbol, if defined, indicates that the frexpl routine is
1347 * available to break a long double floating-point number into
1348 * a normalized fraction and an integral power of 2.
1349 */
1350/*#define HAS_FREXPL / **/
1351
1352/* HAS_STRUCT_FS_DATA:
1353 * This symbol, if defined, indicates that the struct fs_data
1354 * to do statfs() is supported.
1355 */
1356/*#define HAS_STRUCT_FS_DATA / **/
1357
1358/* HAS_FSEEKO:
1359 * This symbol, if defined, indicates that the fseeko routine is
1360 * available to fseek beyond 32 bits (useful for ILP32 hosts).
1361 */
1362/*#define HAS_FSEEKO / **/
1363
1364/* HAS_FSTATFS:
1365 * This symbol, if defined, indicates that the fstatfs routine is
1366 * available to stat filesystems by file descriptors.
1367 */
1368/*#define HAS_FSTATFS / **/
1369
a7fea17f
JH
1370/* HAS_FSYNC:
1371 * This symbol, if defined, indicates that the fsync routine is
1372 * available to write a file's modified data and attributes to
1373 * permanent storage.
1374 */
1375/*#define HAS_FSYNC / **/
1376
3ebb1980
JH
1377/* HAS_FTELLO:
1378 * This symbol, if defined, indicates that the ftello routine is
1379 * available to ftell beyond 32 bits (useful for ILP32 hosts).
1380 */
1381/*#define HAS_FTELLO / **/
1382
1383/* Gconvert:
1384 * This preprocessor macro is defined to convert a floating point
1385 * number to a string without a trailing decimal point. This
1386 * emulates the behavior of sprintf("%g"), but is sometimes much more
1387 * efficient. If gconvert() is not available, but gcvt() drops the
1388 * trailing decimal point, then gcvt() is used. If all else fails,
1389 * a macro using sprintf("%g") is used. Arguments for the Gconvert
1390 * macro are: value, number of digits, whether trailing zeros should
1391 * be retained, and the output buffer.
1392 * Possible values are:
1393 * d_Gconvert='gconvert((x),(n),(t),(b))'
1394 * d_Gconvert='gcvt((x),(n),(b))'
1395 * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
1396 * The last two assume trailing zeros should not be kept.
1397 */
1398#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
1399
1400/* HAS_GETCWD:
1401 * This symbol, if defined, indicates that the getcwd routine is
1402 * available to get the current working directory.
1403 */
1404/*#define HAS_GETCWD / **/
1405
1406/* HAS_GETESPWNAM:
1407 * This symbol, if defined, indicates that the getespwnam system call is
1408 * available to retrieve enchanced (shadow) password entries by name.
1409 */
1410/*#define HAS_GETESPWNAM / **/
1411
1412/* HAS_GETFSSTAT:
1413 * This symbol, if defined, indicates that the getfsstat routine is
1414 * available to stat filesystems in bulk.
1415 */
1416/*#define HAS_GETFSSTAT / **/
1417
1418/* HAS_GETGRENT:
1419 * This symbol, if defined, indicates that the getgrent routine is
1420 * available for sequential access of the group database.
1421 */
1422/*#define HAS_GETGRENT / **/
1423
1424/* HAS_GETHOSTBYADDR:
1425 * This symbol, if defined, indicates that the gethostbyaddr() routine is
1426 * available to look up hosts by their IP addresses.
1427 */
1428/*#define HAS_GETHOSTBYADDR / **/
1429
1430/* HAS_GETHOSTBYNAME:
1431 * This symbol, if defined, indicates that the gethostbyname() routine is
1432 * available to look up host names in some data base or other.
1433 */
1434/*#define HAS_GETHOSTBYNAME / **/
1435
1436/* HAS_GETHOSTENT:
1437 * This symbol, if defined, indicates that the gethostent() routine is
1438 * available to look up host names in some data base or another.
1439 */
1440/*#define HAS_GETHOSTENT / **/
1441
1442/* HAS_GETHOSTNAME:
1443 * This symbol, if defined, indicates that the C program may use the
1444 * gethostname() routine to derive the host name. See also HAS_UNAME
1445 * and PHOSTNAME.
1446 */
1447/* HAS_UNAME:
1448 * This symbol, if defined, indicates that the C program may use the
1449 * uname() routine to derive the host name. See also HAS_GETHOSTNAME
1450 * and PHOSTNAME.
1451 */
1452/* PHOSTNAME:
1453 * This symbol, if defined, indicates the command to feed to the
1454 * popen() routine to derive the host name. See also HAS_GETHOSTNAME
1455 * and HAS_UNAME. Note that the command uses a fully qualified path,
1456 * so that it is safe even if used by a process with super-user
1457 * privileges.
1458 */
1459/* HAS_PHOSTNAME:
1460 * This symbol, if defined, indicates that the C program may use the
1461 * contents of PHOSTNAME as a command to feed to the popen() routine
1462 * to derive the host name.
1463 */
1464/*#define HAS_GETHOSTNAME / **/
1465/*#define HAS_UNAME / **/
1466/*#define HAS_PHOSTNAME / **/
1467#ifdef HAS_PHOSTNAME
1468#define PHOSTNAME "" /* How to get the host name */
1469#endif
1470
1471/* HAS_GETHOST_PROTOS:
1472 * This symbol, if defined, indicates that <netdb.h> includes
1473 * prototypes for gethostent(), gethostbyname(), and
1474 * gethostbyaddr(). Otherwise, it is up to the program to guess
1475 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1476 */
1477/*#define HAS_GETHOST_PROTOS / **/
1478
4e0554ec
JH
1479/* HAS_GETITIMER:
1480 * This symbol, if defined, indicates that the getitimer routine is
1481 * available to return interval timers.
1482 */
1483/*#define HAS_GETITIMER / **/
1484
3ebb1980
JH
1485/* HAS_GETMNT:
1486 * This symbol, if defined, indicates that the getmnt routine is
1487 * available to get filesystem mount info by filename.
1488 */
1489/*#define HAS_GETMNT / **/
1490
1491/* HAS_GETMNTENT:
1492 * This symbol, if defined, indicates that the getmntent routine is
1493 * available to iterate through mounted file systems to get their info.
1494 */
1495/*#define HAS_GETMNTENT / **/
1496
1497/* HAS_GETNETBYADDR:
1498 * This symbol, if defined, indicates that the getnetbyaddr() routine is
1499 * available to look up networks by their IP addresses.
1500 */
1501/*#define HAS_GETNETBYADDR / **/
1502
1503/* HAS_GETNETBYNAME:
1504 * This symbol, if defined, indicates that the getnetbyname() routine is
1505 * available to look up networks by their names.
1506 */
1507/*#define HAS_GETNETBYNAME / **/
1508
1509/* HAS_GETNETENT:
1510 * This symbol, if defined, indicates that the getnetent() routine is
1511 * available to look up network names in some data base or another.
1512 */
1513/*#define HAS_GETNETENT / **/
1514
1515/* HAS_GETNET_PROTOS:
1516 * This symbol, if defined, indicates that <netdb.h> includes
1517 * prototypes for getnetent(), getnetbyname(), and
1518 * getnetbyaddr(). Otherwise, it is up to the program to guess
1519 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1520 */
1521/*#define HAS_GETNET_PROTOS / **/
1522
0c0643d0
JH
1523/* HAS_GETPAGESIZE:
1524 * This symbol, if defined, indicates that the getpagesize system call
1525 * is available to get system page size, which is the granularity of
1526 * many memory management calls.
1527 */
1528/*#define HAS_GETPAGESIZE / **/
1529
3ebb1980
JH
1530/* HAS_GETPROTOENT:
1531 * This symbol, if defined, indicates that the getprotoent() routine is
1532 * available to look up protocols in some data base or another.
1533 */
1534/*#define HAS_GETPROTOENT / **/
1535
a7fea17f
JH
1536/* HAS_GETPGRP:
1537 * This symbol, if defined, indicates that the getpgrp routine is
1538 * available to get the current process group.
1539 */
1540/* USE_BSD_GETPGRP:
1541 * This symbol, if defined, indicates that getpgrp needs one
1542 * arguments whereas USG one needs none.
1543 */
1544/*#define HAS_GETPGRP / **/
1545/*#define USE_BSD_GETPGRP / **/
1546
3ebb1980
JH
1547/* HAS_GETPROTOBYNAME:
1548 * This symbol, if defined, indicates that the getprotobyname()
1549 * routine is available to look up protocols by their name.
1550 */
1551/* HAS_GETPROTOBYNUMBER:
1552 * This symbol, if defined, indicates that the getprotobynumber()
1553 * routine is available to look up protocols by their number.
1554 */
1555/*#define HAS_GETPROTOBYNAME / **/
1556/*#define HAS_GETPROTOBYNUMBER / **/
1557
1558/* HAS_GETPROTO_PROTOS:
1559 * This symbol, if defined, indicates that <netdb.h> includes
1560 * prototypes for getprotoent(), getprotobyname(), and
1561 * getprotobyaddr(). Otherwise, it is up to the program to guess
1562 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1563 */
1564/*#define HAS_GETPROTO_PROTOS / **/
1565
1566/* HAS_GETPRPWNAM:
1567 * This symbol, if defined, indicates that the getprpwnam system call is
1568 * available to retrieve protected (shadow) password entries by name.
1569 */
1570/*#define HAS_GETPRPWNAM / **/
1571
1572/* HAS_GETPWENT:
1573 * This symbol, if defined, indicates that the getpwent routine is
1574 * available for sequential access of the passwd database.
1575 * If this is not available, the older getpw() function may be available.
1576 */
1577/*#define HAS_GETPWENT / **/
1578
1579/* HAS_GETSERVENT:
1580 * This symbol, if defined, indicates that the getservent() routine is
1581 * available to look up network services in some data base or another.
1582 */
1583/*#define HAS_GETSERVENT / **/
1584
1585/* HAS_GETSERV_PROTOS:
1586 * This symbol, if defined, indicates that <netdb.h> includes
1587 * prototypes for getservent(), getservbyname(), and
1588 * getservbyaddr(). Otherwise, it is up to the program to guess
1589 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1590 */
1591/*#define HAS_GETSERV_PROTOS / **/
1592
1593/* HAS_GETSPNAM:
1594 * This symbol, if defined, indicates that the getspnam system call is
1595 * available to retrieve SysV shadow password entries by name.
1596 */
1597/*#define HAS_GETSPNAM / **/
1598
1599/* HAS_GETSERVBYNAME:
1600 * This symbol, if defined, indicates that the getservbyname()
1601 * routine is available to look up services by their name.
1602 */
1603/* HAS_GETSERVBYPORT:
1604 * This symbol, if defined, indicates that the getservbyport()
1605 * routine is available to look up services by their port.
1606 */
1607/*#define HAS_GETSERVBYNAME / **/
1608/*#define HAS_GETSERVBYPORT / **/
1609
1610/* HAS_GNULIBC:
1611 * This symbol, if defined, indicates to the C program that
1612 * the GNU C library is being used.
1613 */
1614/*#define HAS_GNULIBC / **/
1615#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
1616# define _GNU_SOURCE
1617#endif
1618/* HAS_HASMNTOPT:
1619 * This symbol, if defined, indicates that the hasmntopt routine is
1620 * available to query the mount options of file systems.
1621 */
1622/*#define HAS_HASMNTOPT / **/
1623
1624/* HAS_HTONL:
1625 * This symbol, if defined, indicates that the htonl() routine (and
1626 * friends htons() ntohl() ntohs()) are available to do network
1627 * order byte swapping.
1628 */
1629/* HAS_HTONS:
1630 * This symbol, if defined, indicates that the htons() routine (and
1631 * friends htonl() ntohl() ntohs()) are available to do network
1632 * order byte swapping.
1633 */
1634/* HAS_NTOHL:
1635 * This symbol, if defined, indicates that the ntohl() routine (and
1636 * friends htonl() htons() ntohs()) are available to do network
1637 * order byte swapping.
1638 */
1639/* HAS_NTOHS:
1640 * This symbol, if defined, indicates that the ntohs() routine (and
1641 * friends htonl() htons() ntohl()) are available to do network
1642 * order byte swapping.
1643 */
1644/*#define HAS_HTONL / **/
1645/*#define HAS_HTONS / **/
1646/*#define HAS_NTOHL / **/
1647/*#define HAS_NTOHS / **/
1648
1649/* HAS_ICONV:
1650 * This symbol, if defined, indicates that the iconv routine is
1651 * available to do character set conversions.
1652 */
1653/*#define HAS_ICONV / **/
1654
1655/* HAS_INT64_T:
1656 * This symbol will defined if the C compiler supports int64_t.
1657 * Usually the <inttypes.h> needs to be included, but sometimes
1658 * <sys/types.h> is enough.
1659 */
1660/*#define HAS_INT64_T / **/
1661
1662/* HAS_ISASCII:
1663 * This manifest constant lets the C program know that isascii
1664 * is available.
1665 */
1666/*#define HAS_ISASCII / **/
1667
1668/* HAS_ISNAN:
1669 * This symbol, if defined, indicates that the isnan routine is
1670 * available to check whether a double is a NaN.
1671 */
1672/*#define HAS_ISNAN / **/
1673
1674/* HAS_ISNANL:
1675 * This symbol, if defined, indicates that the isnanl routine is
1676 * available to check whether a long double is a NaN.
1677 */
1678/*#define HAS_ISNANL / **/
1679
1680/* HAS_LCHOWN:
1681 * This symbol, if defined, indicates that the lchown routine is
1682 * available to operate on a symbolic link (instead of following the
1683 * link).
1684 */
1685/*#define HAS_LCHOWN / **/
1686
1687/* HAS_LDBL_DIG:
1688 * This symbol, if defined, indicates that this system's <float.h>
1689 * or <limits.h> defines the symbol LDBL_DIG, which is the number
1690 * of significant digits in a long double precision number. Unlike
1691 * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
1692 */
1693/*#define HAS_LDBL_DIG / * */
1694
1695/* HAS_LONG_DOUBLE:
1696 * This symbol will be defined if the C compiler supports long
1697 * doubles.
1698 */
1699/* LONG_DOUBLESIZE:
1700 * This symbol contains the size of a long double, so that the
1701 * C preprocessor can make decisions based on it. It is only
1702 * defined if the system supports long doubles.
1703 */
1704/*#define HAS_LONG_DOUBLE / **/
1705#ifdef HAS_LONG_DOUBLE
1706#define LONG_DOUBLESIZE 1 /**/
1707#endif
1708
1709/* HAS_LONG_LONG:
1710 * This symbol will be defined if the C compiler supports long long.
1711 */
1712/* LONGLONGSIZE:
1713 * This symbol contains the size of a long long, so that the
1714 * C preprocessor can make decisions based on it. It is only
1715 * defined if the system supports long long.
1716 */
1717/*#define HAS_LONG_LONG / **/
1718#ifdef HAS_LONG_LONG
1719#define LONGLONGSIZE 1 /**/
1720#endif
1721
1722/* HAS_LSEEK_PROTO:
1723 * This symbol, if defined, indicates that the system provides
1724 * a prototype for the lseek() function. Otherwise, it is up
1725 * to the program to supply one. A good guess is
1726 * extern off_t lseek(int, off_t, int);
1727 */
1728/*#define HAS_LSEEK_PROTO / **/
1729
1730/* HAS_MADVISE:
1731 * This symbol, if defined, indicates that the madvise system call is
1732 * available to map a file into memory.
1733 */
1734/*#define HAS_MADVISE / **/
1735
1736/* HAS_MEMCHR:
1737 * This symbol, if defined, indicates that the memchr routine is available
1738 * to locate characters within a C string.
1739 */
1740/*#define HAS_MEMCHR / **/
1741
1742/* HAS_MKDTEMP:
1743 * This symbol, if defined, indicates that the mkdtemp routine is
1744 * available to exclusively create a uniquely named temporary directory.
1745 */
1746/*#define HAS_MKDTEMP / **/
1747
1748/* HAS_MKSTEMP:
1749 * This symbol, if defined, indicates that the mkstemp routine is
1750 * available to exclusively create and open a uniquely named
1751 * temporary file.
1752 */
1753/*#define HAS_MKSTEMP / **/
1754
1755/* HAS_MKSTEMPS:
1756 * This symbol, if defined, indicates that the mkstemps routine is
1757 * available to excluslvely create and open a uniquely named
1758 * (with a suffix) temporary file.
1759 */
1760/*#define HAS_MKSTEMPS / **/
1761
1762/* HAS_MMAP:
1763 * This symbol, if defined, indicates that the mmap system call is
1764 * available to map a file into memory.
1765 */
1766/* Mmap_t:
1767 * This symbol holds the return type of the mmap() system call
1768 * (and simultaneously the type of the first argument).
1769 * Usually set to 'void *' or 'cadd_t'.
1770 */
1771/*#define HAS_MMAP / **/
1772#define Mmap_t /**/
1773
1774/* HAS_MODFL:
1775 * This symbol, if defined, indicates that the modfl routine is
1776 * available to split a long double x into a fractional part f and
1777 * an integer part i such that |f| < 1.0 and (f + i) = x.
1778 */
1779/*#define HAS_MODFL / **/
1780
1781/* HAS_MPROTECT:
1782 * This symbol, if defined, indicates that the mprotect system call is
1783 * available to modify the access protection of a memory mapped file.
1784 */
1785/*#define HAS_MPROTECT / **/
1786
1787/* HAS_MSG:
1788 * This symbol, if defined, indicates that the entire msg*(2) library is
1789 * supported (IPC mechanism based on message queues).
1790 */
1791/*#define HAS_MSG / **/
1792
4e0554ec
JH
1793/* HAS_STRUCT_MSGHDR:
1794 * This symbol, if defined, indicates that the struct msghdr
1795 * is supported.
1796 */
1797/*#define HAS_STRUCT_MSGHDR / **/
1798
3ebb1980
JH
1799/* HAS_OFF64_T:
1800 * This symbol will be defined if the C compiler supports off64_t.
1801 */
1802/*#define HAS_OFF64_T / **/
1803
1804/* HAS_OPEN3:
1805 * This manifest constant lets the C program know that the three
1806 * argument form of open(2) is available.
1807 */
1808/*#define HAS_OPEN3 / **/
1809
1810/* OLD_PTHREAD_CREATE_JOINABLE:
1811 * This symbol, if defined, indicates how to create pthread
1812 * in joinable (aka undetached) state. NOTE: not defined
1813 * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
1814 * (the new version of the constant).
1815 * If defined, known values are PTHREAD_CREATE_UNDETACHED
1816 * and __UNDETACHED.
1817 */
1818/*#define OLD_PTHREAD_CREATE_JOINABLE / **/
1819
1820/* HAS_PTHREAD_YIELD:
1821 * This symbol, if defined, indicates that the pthread_yield
1822 * routine is available to yield the execution of the current
1823 * thread. sched_yield is preferable to pthread_yield.
1824 */
1825/* SCHED_YIELD:
1826 * This symbol defines the way to yield the execution of
1827 * the current thread. Known ways are sched_yield,
1828 * pthread_yield, and pthread_yield with NULL.
1829 */
1830/* HAS_SCHED_YIELD:
1831 * This symbol, if defined, indicates that the sched_yield
1832 * routine is available to yield the execution of the current
1833 * thread. sched_yield is preferable to pthread_yield.
1834 */
1835/*#define HAS_PTHREAD_YIELD / **/
1836#define SCHED_YIELD sched_yield() /**/
1837/*#define HAS_SCHED_YIELD / **/
1838
4e0554ec
JH
1839/* HAS_READV:
1840 * This symbol, if defined, indicates that the readv routine is
1841 * available to do gather reads. You will also need <sys/uio.h>
1842 * and there I_SYSUIO.
1843 */
1844/*#define HAS_READV / **/
1845
1846/* HAS_RECVMSG:
1847 * This symbol, if defined, indicates that the recvmsg routine is
1848 * available to send structured socket messages.
1849 */
1850/*#define HAS_RECVMSG / **/
1851
3ebb1980
JH
1852/* HAS_SAFE_BCOPY:
1853 * This symbol, if defined, indicates that the bcopy routine is available
1854 * to copy potentially overlapping memory blocks. Otherwise you should
1855 * probably use memmove() or memcpy(). If neither is defined, roll your
1856 * own version.
1857 */
1858/*#define HAS_SAFE_BCOPY / **/
1859
1860/* HAS_SAFE_MEMCPY:
1861 * This symbol, if defined, indicates that the memcpy routine is available
1862 * to copy potentially overlapping memory blocks. Otherwise you should
1863 * probably use memmove() or memcpy(). If neither is defined, roll your
1864 * own version.
1865 */
1866/*#define HAS_SAFE_MEMCPY / **/
1867
1868/* HAS_SANE_MEMCMP:
1869 * This symbol, if defined, indicates that the memcmp routine is available
1870 * and can be used to compare relative magnitudes of chars with their high
1871 * bits set. If it is not defined, roll your own version.
1872 */
1873/*#define HAS_SANE_MEMCMP / **/
1874
a7fea17f
JH
1875/* HAS_SBRK_PROTO:
1876 * This symbol, if defined, indicates that the system provides
1877 * a prototype for the sbrk() function. Otherwise, it is up
1878 * to the program to supply one. Good guesses are
1879 * extern void* sbrk _((int));
1880 * extern void* sbrk _((size_t));
1881 */
1882/*#define HAS_SBRK_PROTO / **/
1883
3ebb1980
JH
1884/* HAS_SEM:
1885 * This symbol, if defined, indicates that the entire sem*(2) library is
1886 * supported.
1887 */
1888/*#define HAS_SEM / **/
1889
4e0554ec
JH
1890/* HAS_SENDMSG:
1891 * This symbol, if defined, indicates that the sendmsg routine is
1892 * available to send structured socket messages.
1893 */
1894/*#define HAS_SENDMSG / **/
1895
3ebb1980
JH
1896/* HAS_SETGRENT:
1897 * This symbol, if defined, indicates that the setgrent routine is
1898 * available for initializing sequential access of the group database.
1899 */
1900/*#define HAS_SETGRENT / **/
1901
1902/* HAS_SETGROUPS:
1903 * This symbol, if defined, indicates that the setgroups() routine is
1904 * available to set the list of process groups. If unavailable, multiple
1905 * groups are probably not supported.
1906 */
1907/*#define HAS_SETGROUPS / **/
1908
1909/* HAS_SETHOSTENT:
1910 * This symbol, if defined, indicates that the sethostent() routine is
1911 * available.
1912 */
1913/*#define HAS_SETHOSTENT / **/
1914
4e0554ec
JH
1915/* HAS_SETITIMER:
1916 * This symbol, if defined, indicates that the setitimer routine is
1917 * available to set interval timers.
1918 */
1919/*#define HAS_SETITIMER / **/
1920
3ebb1980
JH
1921/* HAS_SETNETENT:
1922 * This symbol, if defined, indicates that the setnetent() routine is
1923 * available.
1924 */
1925/*#define HAS_SETNETENT / **/
1926
1927/* HAS_SETPROTOENT:
1928 * This symbol, if defined, indicates that the setprotoent() routine is
1929 * available.
1930 */
1931/*#define HAS_SETPROTOENT / **/
1932
a7fea17f
JH
1933/* HAS_SETPGRP:
1934 * This symbol, if defined, indicates that the setpgrp routine is
1935 * available to set the current process group.
1936 */
1937/* USE_BSD_SETPGRP:
1938 * This symbol, if defined, indicates that setpgrp needs two
1939 * arguments whereas USG one needs none. See also HAS_SETPGID
1940 * for a POSIX interface.
1941 */
1942/*#define HAS_SETPGRP / **/
1943/*#define USE_BSD_SETPGRP / **/
1944
fc92a0ee
JH
1945/* HAS_SETPROCTITLE:
1946 * This symbol, if defined, indicates that the setproctitle routine is
1947 * available to set process title.
1948 */
1949/*#define HAS_SETPROCTITLE / **/
1950
3ebb1980
JH
1951/* HAS_SETPWENT:
1952 * This symbol, if defined, indicates that the setpwent routine is
1953 * available for initializing sequential access of the passwd database.
1954 */
1955/*#define HAS_SETPWENT / **/
1956
1957/* HAS_SETSERVENT:
1958 * This symbol, if defined, indicates that the setservent() routine is
1959 * available.
1960 */
1961/*#define HAS_SETSERVENT / **/
1962
1963/* HAS_SETVBUF:
1964 * This symbol, if defined, indicates that the setvbuf routine is
1965 * available to change buffering on an open stdio stream.
1966 * to a line-buffered mode.
1967 */
1968/*#define HAS_SETVBUF / **/
1969
1970/* USE_SFIO:
1971 * This symbol, if defined, indicates that sfio should
1972 * be used.
1973 */
1974/*#define USE_SFIO / **/
1975
1976/* HAS_SHM:
1977 * This symbol, if defined, indicates that the entire shm*(2) library is
1978 * supported.
1979 */
1980/*#define HAS_SHM / **/
1981
1982/* HAS_SIGACTION:
1983 * This symbol, if defined, indicates that Vr4's sigaction() routine
1984 * is available.
1985 */
1986/*#define HAS_SIGACTION / **/
1987
1988/* HAS_SIGSETJMP:
1989 * This variable indicates to the C program that the sigsetjmp()
1990 * routine is available to save the calling process's registers
1991 * and stack environment for later use by siglongjmp(), and
1992 * to optionally save the process's signal mask. See
1993 * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
1994 */
1995/* Sigjmp_buf:
1996 * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
1997 */
1998/* Sigsetjmp:
1999 * This macro is used in the same way as sigsetjmp(), but will invoke
2000 * traditional setjmp() if sigsetjmp isn't available.
2001 * See HAS_SIGSETJMP.
2002 */
2003/* Siglongjmp:
2004 * This macro is used in the same way as siglongjmp(), but will invoke
2005 * traditional longjmp() if siglongjmp isn't available.
2006 * See HAS_SIGSETJMP.
2007 */
2008/*#define HAS_SIGSETJMP / **/
2009#ifdef HAS_SIGSETJMP
2010#define Sigjmp_buf sigjmp_buf
2011#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
2012#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
2013#else
2014#define Sigjmp_buf jmp_buf
2015#define Sigsetjmp(buf,save_mask) setjmp((buf))
2016#define Siglongjmp(buf,retval) longjmp((buf),(retval))
2017#endif
2018
2019/* HAS_SOCKET:
2020 * This symbol, if defined, indicates that the BSD socket interface is
2021 * supported.
2022 */
2023/* HAS_SOCKETPAIR:
2024 * This symbol, if defined, indicates that the BSD socketpair() call is
2025 * supported.
2026 */
2027/* HAS_MSG_CTRUNC:
2028 * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
2029 * Checking just with #ifdef might not be enough because this symbol
2030 * has been known to be an enum.
2031 */
2032/* HAS_MSG_DONTROUTE:
2033 * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
2034 * Checking just with #ifdef might not be enough because this symbol
2035 * has been known to be an enum.
2036 */
2037/* HAS_MSG_OOB:
2038 * This symbol, if defined, indicates that the MSG_OOB is supported.
2039 * Checking just with #ifdef might not be enough because this symbol
2040 * has been known to be an enum.
2041 */
2042/* HAS_MSG_PEEK:
2043 * This symbol, if defined, indicates that the MSG_PEEK is supported.
2044 * Checking just with #ifdef might not be enough because this symbol
2045 * has been known to be an enum.
2046 */
2047/* HAS_MSG_PROXY:
2048 * This symbol, if defined, indicates that the MSG_PROXY is supported.
2049 * Checking just with #ifdef might not be enough because this symbol
2050 * has been known to be an enum.
2051 */
2052/* HAS_SCM_RIGHTS:
2053 * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
2054 * Checking just with #ifdef might not be enough because this symbol
2055 * has been known to be an enum.
2056 */
2057/*#define HAS_SOCKET / **/
2058/*#define HAS_SOCKETPAIR / **/
2059/*#define HAS_MSG_CTRUNC / **/
2060/*#define HAS_MSG_DONTROUTE / **/
2061/*#define HAS_MSG_OOB / **/
2062/*#define HAS_MSG_PEEK / **/
2063/*#define HAS_MSG_PROXY / **/
2064/*#define HAS_SCM_RIGHTS / **/
2065
1b9c9cf5
DH
2066/* HAS_SOCKS5_INIT:
2067 * This symbol, if defined, indicates that the socks5_init routine is
2068 * available to initialize SOCKS 5.
2069 */
2070/*#define HAS_SOCKS5_INIT / **/
2071
3ebb1980
JH
2072/* HAS_SQRTL:
2073 * This symbol, if defined, indicates that the sqrtl routine is
2074 * available to do long double square roots.
2075 */
2076/*#define HAS_SQRTL / **/
2077
2078/* USE_STAT_BLOCKS:
2079 * This symbol is defined if this system has a stat structure declaring
2080 * st_blksize and st_blocks.
2081 */
2082#ifndef USE_STAT_BLOCKS
2083/*#define USE_STAT_BLOCKS / **/
2084#endif
2085
2086/* HAS_STRUCT_STATFS_F_FLAGS:
2087 * This symbol, if defined, indicates that the struct statfs
2088 * does have the f_flags member containing the mount flags of
2089 * the filesystem containing the file.
2090 * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
2091 * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
2092 * have statfs() and struct statfs, they have ustat() and getmnt()
2093 * with struct ustat and struct fs_data.
2094 */
2095/*#define HAS_STRUCT_STATFS_F_FLAGS / **/
2096
2097/* HAS_STRUCT_STATFS:
2098 * This symbol, if defined, indicates that the struct statfs
2099 * to do statfs() is supported.
2100 */
2101/*#define HAS_STRUCT_STATFS / **/
2102
2103/* HAS_FSTATVFS:
2104 * This symbol, if defined, indicates that the fstatvfs routine is
2105 * available to stat filesystems by file descriptors.
2106 */
2107/*#define HAS_FSTATVFS / **/
2108
2109/* USE_STDIO_PTR:
2110 * This symbol is defined if the _ptr and _cnt fields (or similar)
2111 * of the stdio FILE structure can be used to access the stdio buffer
2112 * for a file handle. If this is defined, then the FILE_ptr(fp)
2113 * and FILE_cnt(fp) macros will also be defined and should be used
2114 * to access these fields.
2115 */
2116/* FILE_ptr:
2117 * This macro is used to access the _ptr field (or equivalent) of the
2118 * FILE structure pointed to by its argument. This macro will always be
2119 * defined if USE_STDIO_PTR is defined.
2120 */
2121/* STDIO_PTR_LVALUE:
2122 * This symbol is defined if the FILE_ptr macro can be used as an
2123 * lvalue.
2124 */
2125/* FILE_cnt:
2126 * This macro is used to access the _cnt field (or equivalent) of the
2127 * FILE structure pointed to by its argument. This macro will always be
2128 * defined if USE_STDIO_PTR is defined.
2129 */
2130/* STDIO_CNT_LVALUE:
2131 * This symbol is defined if the FILE_cnt macro can be used as an
2132 * lvalue.
2133 */
a7ffa9b9
NC
2134/* STDIO_PTR_LVAL_SETS_CNT:
2135 * This symbol is defined if using the FILE_ptr macro as an lvalue
2136 * to increase the pointer by n has the side effect of decreasing the
2137 * value of File_cnt(fp) by n.
2138 */
2139/* STDIO_PTR_LVAL_NOCHANGE_CNT:
2140 * This symbol is defined if using the FILE_ptr macro as an lvalue
2141 * to increase the pointer by n leaves File_cnt(fp) unchanged.
2142 */
3ebb1980
JH
2143/*#define USE_STDIO_PTR / **/
2144#ifdef USE_STDIO_PTR
2145#define FILE_ptr(fp) ((fp)->_IO_read_ptr)
ef71a6f5 2146/*#define STDIO_PTR_LVALUE / **/
3ebb1980
JH
2147#define FILE_cnt(fp) ((fp)->_IO_read_end - (fp)->_IO_read_ptr)
2148/*#define STDIO_CNT_LVALUE / **/
a7ffa9b9
NC
2149/*#define STDIO_PTR_LVAL_SETS_CNT / **/
2150/*#define STDIO_PTR_LVAL_NOCHANGE_CNT / **/
3ebb1980
JH
2151#endif
2152
2153/* USE_STDIO_BASE:
2154 * This symbol is defined if the _base field (or similar) of the
2155 * stdio FILE structure can be used to access the stdio buffer for
2156 * a file handle. If this is defined, then the FILE_base(fp) macro
2157 * will also be defined and should be used to access this field.
2158 * Also, the FILE_bufsiz(fp) macro will be defined and should be used
2159 * to determine the number of bytes in the buffer. USE_STDIO_BASE
2160 * will never be defined unless USE_STDIO_PTR is.
2161 */
2162/* FILE_base:
2163 * This macro is used to access the _base field (or equivalent) of the
2164 * FILE structure pointed to by its argument. This macro will always be
2165 * defined if USE_STDIO_BASE is defined.
2166 */
2167/* FILE_bufsiz:
2168 * This macro is used to determine the number of bytes in the I/O
2169 * buffer pointed to by _base field (or equivalent) of the FILE
2170 * structure pointed to its argument. This macro will always be defined
2171 * if USE_STDIO_BASE is defined.
2172 */
2173/*#define USE_STDIO_BASE / **/
2174#ifdef USE_STDIO_BASE
2175#define FILE_base(fp) ((fp)->_IO_read_base)
2176#define FILE_bufsiz(fp) ((fp)->_IO_read_end - (fp)->_IO_read_base)
2177#endif
2178
2179/* HAS_STRERROR:
2180 * This symbol, if defined, indicates that the strerror routine is
2181 * available to translate error numbers to strings. See the writeup
2182 * of Strerror() in this file before you try to define your own.
2183 */
2184/* HAS_SYS_ERRLIST:
2185 * This symbol, if defined, indicates that the sys_errlist array is
2186 * available to translate error numbers to strings. The extern int
2187 * sys_nerr gives the size of that table.
2188 */
2189/* Strerror:
2190 * This preprocessor symbol is defined as a macro if strerror() is
2191 * not available to translate error numbers to strings but sys_errlist[]
2192 * array is there.
2193 */
2194/*#define HAS_STRERROR / **/
2195/*#define HAS_SYS_ERRLIST / **/
2196#define Strerror(e) strerror(e)
2197
2198/* HAS_STRTOLD:
2199 * This symbol, if defined, indicates that the strtold routine is
2200 * available to convert strings to long doubles.
2201 */
2202/*#define HAS_STRTOLD / **/
2203
2204/* HAS_STRTOLL:
2205 * This symbol, if defined, indicates that the strtoll routine is
2206 * available to convert strings to long longs.
2207 */
2208/*#define HAS_STRTOLL / **/
2209
d0e6d399
NC
2210/* HAS_STRTOQ:
2211 * This symbol, if defined, indicates that the strtoq routine is
2212 * available to convert strings to long longs (quads).
2213 */
ef71a6f5 2214/*#define HAS_STRTOQ / **/
28e5dec8 2215
a7fea17f
JH
2216/* HAS_STRTOUL:
2217 * This symbol, if defined, indicates that the strtoul routine is
2218 * available to provide conversion of strings to unsigned long.
2219 */
2220/*#define HAS_STRTOUL / **/
2221
3ebb1980
JH
2222/* HAS_STRTOULL:
2223 * This symbol, if defined, indicates that the strtoull routine is
2224 * available to convert strings to unsigned long longs.
2225 */
2226/*#define HAS_STRTOULL / **/
2227
2228/* HAS_STRTOUQ:
2229 * This symbol, if defined, indicates that the strtouq routine is
2230 * available to convert strings to unsigned long longs (quads).
2231 */
2232/*#define HAS_STRTOUQ / **/
2233
2234/* HAS_TELLDIR_PROTO:
2235 * This symbol, if defined, indicates that the system provides
2236 * a prototype for the telldir() function. Otherwise, it is up
2237 * to the program to supply one. A good guess is
2238 * extern long telldir _((DIR*));
2239 */
2240/*#define HAS_TELLDIR_PROTO / **/
2241
2242/* Time_t:
2243 * This symbol holds the type returned by time(). It can be long,
2244 * or time_t on BSD sites (in which case <sys/types.h> should be
2245 * included).
2246 */
2247#define Time_t int /* Time type */
2248
2249/* HAS_TIMES:
2250 * This symbol, if defined, indicates that the times() routine exists.
2251 * Note that this became obsolete on some systems (SUNOS), which now
2252 * use getrusage(). It may be necessary to include <sys/times.h>.
2253 */
2254/*#define HAS_TIMES / **/
2255
4e0554ec
JH
2256/* HAS_UALARM:
2257 * This symbol, if defined, indicates that the ualarm routine is
2258 * available to do alarms with microsecond granularity.
2259 */
2260/*#define HAS_UALARM / **/
2261
3ebb1980
JH
2262/* HAS_UNION_SEMUN:
2263 * This symbol, if defined, indicates that the union semun is
2264 * defined by including <sys/sem.h>. If not, the user code
2265 * probably needs to define it as:
2266 * union semun {
2267 * int val;
2268 * struct semid_ds *buf;
2269 * unsigned short *array;
2270 * }
2271 */
2272/* USE_SEMCTL_SEMUN:
2273 * This symbol, if defined, indicates that union semun is
2274 * used for semctl IPC_STAT.
2275 */
2276/* USE_SEMCTL_SEMID_DS:
2277 * This symbol, if defined, indicates that struct semid_ds * is
2278 * used for semctl IPC_STAT.
2279 */
2280/*#define HAS_UNION_SEMUN / **/
2281/*#define USE_SEMCTL_SEMUN / **/
2282/*#define USE_SEMCTL_SEMID_DS / **/
2283
2284/* HAS_USTAT:
2285 * This symbol, if defined, indicates that the ustat system call is
2286 * available to query file system statistics by dev_t.
2287 */
2288/*#define HAS_USTAT / **/
2289
2290/* HAS_VFORK:
2291 * This symbol, if defined, indicates that vfork() exists.
2292 */
2293/*#define HAS_VFORK / **/
2294
2295/* Signal_t:
2296 * This symbol's value is either "void" or "int", corresponding to the
2297 * appropriate return type of a signal handler. Thus, you can declare
2298 * a signal handler using "Signal_t (*handler)()", and define the
2299 * handler using "Signal_t handler(sig)".
2300 */
2301#define Signal_t int /* Signal handler's return type */
2302
2303/* HAS_VPRINTF:
2304 * This symbol, if defined, indicates that the vprintf routine is available
2305 * to printf with a pointer to an argument list. If unavailable, you
2306 * may need to write your own, probably in terms of _doprnt().
2307 */
2308/* USE_CHAR_VSPRINTF:
2309 * This symbol is defined if this system has vsprintf() returning type
2310 * (char*). The trend seems to be to declare it as "int vsprintf()". It
2311 * is up to the package author to declare vsprintf correctly based on the
2312 * symbol.
2313 */
2314#define HAS_VPRINTF /**/
2315/*#define USE_CHAR_VSPRINTF / **/
2316
4e0554ec
JH
2317/* HAS_WRITEV:
2318 * This symbol, if defined, indicates that the writev routine is
2319 * available to do scatter writes.
2320 */
2321/*#define HAS_WRITEV / **/
2322
3ebb1980
JH
2323/* USE_DYNAMIC_LOADING:
2324 * This symbol, if defined, indicates that dynamic loading of
2325 * some sort is available.
2326 */
2327/*#define USE_DYNAMIC_LOADING / **/
2328
2329/* DOUBLESIZE:
2330 * This symbol contains the size of a double, so that the C preprocessor
2331 * can make decisions based on it.
2332 */
a24ffc0b 2333#define DOUBLESIZE 8 /**/
3ebb1980
JH
2334
2335/* EBCDIC:
2336 * This symbol, if defined, indicates that this system uses
2337 * EBCDIC encoding.
2338 */
2339/*#define EBCDIC / **/
2340
2341/* FFLUSH_NULL:
2342 * This symbol, if defined, tells that fflush(NULL) does flush
2343 * all pending stdio output.
2344 */
2345/* FFLUSH_ALL:
2346 * This symbol, if defined, tells that to flush
2347 * all pending stdio output one must loop through all
2348 * the stdio file handles stored in an array and fflush them.
2349 * Note that if fflushNULL is defined, fflushall will not
2350 * even be probed for and will be left undefined.
2351 */
2352/*#define FFLUSH_NULL / **/
2353/*#define FFLUSH_ALL / **/
2354
2355/* Fpos_t:
2356 * This symbol holds the type used to declare file positions in libc.
2357 * It can be fpos_t, long, uint, etc... It may be necessary to include
2358 * <sys/types.h> to get any typedef'ed information.
2359 */
2360#define Fpos_t int /* File position type */
2361
2362/* Gid_t_f:
2363 * This symbol defines the format string used for printing a Gid_t.
2364 */
2365#define Gid_t_f "lu" /**/
2366
2367/* Gid_t_sign:
2368 * This symbol holds the signedess of a Gid_t.
2369 * 1 for unsigned, -1 for signed.
2370 */
2371#define Gid_t_sign 1 /* GID sign */
2372
2373/* Gid_t_size:
2374 * This symbol holds the size of a Gid_t in bytes.
2375 */
2376#define Gid_t_size 4 /* GID size */
2377
2378/* Gid_t:
2379 * This symbol holds the return type of getgid() and the type of
2380 * argument to setrgid() and related functions. Typically,
2381 * it is the type of group ids in the kernel. It can be int, ushort,
2382 * gid_t, etc... It may be necessary to include <sys/types.h> to get
2383 * any typedef'ed information.
2384 */
2385#define Gid_t int /* Type for getgid(), etc... */
2386
2387/* Groups_t:
2388 * This symbol holds the type used for the second argument to
2389 * getgroups() and setgroups(). Usually, this is the same as
2390 * gidtype (gid_t) , but sometimes it isn't.
2391 * It can be int, ushort, gid_t, etc...
2392 * It may be necessary to include <sys/types.h> to get any
2393 * typedef'ed information. This is only required if you have
2394 * getgroups() or setgroups()..
2395 */
2396#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
2397#define Groups_t int /* Type for 2nd arg to [sg]etgroups() */
2398#endif
2399
2400/* DB_Prefix_t:
2401 * This symbol contains the type of the prefix structure element
2402 * in the <db.h> header file. In older versions of DB, it was
2403 * int, while in newer ones it is u_int32_t.
2404 */
2405/* DB_Hash_t:
2406 * This symbol contains the type of the prefix structure element
2407 * in the <db.h> header file. In older versions of DB, it was
2408 * int, while in newer ones it is size_t.
2409 */
2410#define DB_Hash_t u_int32_t /**/
2411#define DB_Prefix_t size_t /**/
2412
2413/* I_GRP:
2414 * This symbol, if defined, indicates to the C program that it should
2415 * include <grp.h>.
2416 */
2417/* GRPASSWD:
2418 * This symbol, if defined, indicates to the C program that struct group
2419 * in <grp.h> contains gr_passwd.
2420 */
2421/*#define I_GRP / **/
2422/*#define GRPASSWD / **/
2423
2424/* I_ICONV:
2425 * This symbol, if defined, indicates that <iconv.h> exists and
2426 * should be included.
2427 */
2428/*#define I_ICONV / **/
2429
2430/* I_IEEEFP:
2431 * This symbol, if defined, indicates that <ieeefp.h> exists and
2432 * should be included.
2433 */
2434/*#define I_IEEEFP / **/
2435
2436/* I_INTTYPES:
2437 * This symbol, if defined, indicates to the C program that it should
2438 * include <inttypes.h>.
2439 */
2440/*#define I_INTTYPES / **/
2441
1b9c9cf5
DH
2442/* I_LIBUTIL:
2443 * This symbol, if defined, indicates that <libutil.h> exists and
2444 * should be included.
2445 */
2446/*#define I_LIBUTIL / **/
2447
3ebb1980
JH
2448/* I_MACH_CTHREADS:
2449 * This symbol, if defined, indicates to the C program that it should
2450 * include <mach/cthreads.h>.
2451 */
2452/*#define I_MACH_CTHREADS / **/
2453
2454/* I_MNTENT:
2455 * This symbol, if defined, indicates that <mntent.h> exists and
2456 * should be included.
2457 */
2458/*#define I_MNTENT / **/
2459
2460/* I_NETDB:
2461 * This symbol, if defined, indicates that <netdb.h> exists and
2462 * should be included.
2463 */
2464/*#define I_NETDB / **/
2465
2466/* I_NETINET_TCP:
2467 * This symbol, if defined, indicates to the C program that it should
2468 * include <netinet/tcp.h>.
2469 */
2470/*#define I_NETINET_TCP / **/
2471
2472/* I_POLL:
2473 * This symbol, if defined, indicates that <poll.h> exists and
2474 * should be included.
2475 */
2476/*#define I_POLL / **/
2477
2478/* I_PROT:
2479 * This symbol, if defined, indicates that <prot.h> exists and
2480 * should be included.
2481 */
2482/*#define I_PROT / **/
2483
2484/* I_PTHREAD:
2485 * This symbol, if defined, indicates to the C program that it should
2486 * include <pthread.h>.
2487 */
2488/*#define I_PTHREAD / **/
2489
2490/* I_PWD:
2491 * This symbol, if defined, indicates to the C program that it should
2492 * include <pwd.h>.
2493 */
2494/* PWQUOTA:
2495 * This symbol, if defined, indicates to the C program that struct passwd
2496 * contains pw_quota.
2497 */
2498/* PWAGE:
2499 * This symbol, if defined, indicates to the C program that struct passwd
2500 * contains pw_age.
2501 */
2502/* PWCHANGE:
2503 * This symbol, if defined, indicates to the C program that struct passwd
2504 * contains pw_change.
2505 */
2506/* PWCLASS:
2507 * This symbol, if defined, indicates to the C program that struct passwd
2508 * contains pw_class.
2509 */
2510/* PWEXPIRE:
2511 * This symbol, if defined, indicates to the C program that struct passwd
2512 * contains pw_expire.
2513 */
2514/* PWCOMMENT:
2515 * This symbol, if defined, indicates to the C program that struct passwd
2516 * contains pw_comment.
2517 */
2518/* PWGECOS:
2519 * This symbol, if defined, indicates to the C program that struct passwd
2520 * contains pw_gecos.
2521 */
2522/* PWPASSWD:
2523 * This symbol, if defined, indicates to the C program that struct passwd
2524 * contains pw_passwd.
2525 */
2526/*#define I_PWD / **/
2527/*#define PWQUOTA / **/
2528/*#define PWAGE / **/
2529/*#define PWCHANGE / **/
2530/*#define PWCLASS / **/
2531/*#define PWEXPIRE / **/
2532/*#define PWCOMMENT / **/
2533/*#define PWGECOS / **/
2534/*#define PWPASSWD / **/
2535
2536/* I_SHADOW:
2537 * This symbol, if defined, indicates that <shadow.h> exists and
2538 * should be included.
2539 */
2540/*#define I_SHADOW / **/
2541
2542/* I_SOCKS:
2543 * This symbol, if defined, indicates that <socks.h> exists and
2544 * should be included.
2545 */
2546/*#define I_SOCKS / **/
2547
2548/* I_SUNMATH:
2549 * This symbol, if defined, indicates that <sunmath.h> exists and
2550 * should be included.
2551 */
2552/*#define I_SUNMATH / **/
2553
2554/* I_SYSLOG:
2555 * This symbol, if defined, indicates that <syslog.h> exists and
2556 * should be included.
2557 */
2558/*#define I_SYSLOG / **/
2559
2560/* I_SYSMODE:
2561 * This symbol, if defined, indicates that <sys/mode.h> exists and
2562 * should be included.
2563 */
2564/*#define I_SYSMODE / **/
2565
2566/* I_SYS_MOUNT:
2567 * This symbol, if defined, indicates that <sys/mount.h> exists and
2568 * should be included.
2569 */
2570/*#define I_SYS_MOUNT / **/
2571
2572/* I_SYS_STATFS:
2573 * This symbol, if defined, indicates that <sys/statfs.h> exists.
2574 */
2575/*#define I_SYS_STATFS / **/
2576
2577/* I_SYS_STATVFS:
2578 * This symbol, if defined, indicates that <sys/statvfs.h> exists and
2579 * should be included.
2580 */
2581/*#define I_SYS_STATVFS / **/
2582
2583/* I_SYSUIO:
2584 * This symbol, if defined, indicates that <sys/uio.h> exists and
2585 * should be included.
2586 */
2587/*#define I_SYSUIO / **/
2588
2589/* I_SYSUTSNAME:
2590 * This symbol, if defined, indicates that <sys/utsname.h> exists and
2591 * should be included.
2592 */
2593/*#define I_SYSUTSNAME / **/
2594
2595/* I_SYS_VFS:
2596 * This symbol, if defined, indicates that <sys/vfs.h> exists and
2597 * should be included.
2598 */
2599/*#define I_SYS_VFS / **/
2600
2601/* I_TIME:
2602 * This symbol, if defined, indicates to the C program that it should
2603 * include <time.h>.
2604 */
2605/* I_SYS_TIME:
2606 * This symbol, if defined, indicates to the C program that it should
2607 * include <sys/time.h>.
2608 */
2609/* I_SYS_TIME_KERNEL:
2610 * This symbol, if defined, indicates to the C program that it should
2611 * include <sys/time.h> with KERNEL defined.
2612 */
2613#define I_TIME /**/
2614/*#define I_SYS_TIME / **/
2615/*#define I_SYS_TIME_KERNEL / **/
2616
2617/* I_USTAT:
2618 * This symbol, if defined, indicates that <ustat.h> exists and
2619 * should be included.
2620 */
2621/*#define I_USTAT / **/
2622
2623/* PERL_INC_VERSION_LIST:
2624 * This variable specifies the list of subdirectories in over
2625 * which perl.c:incpush() and lib/lib.pm will automatically
2626 * search when adding directories to @INC, in a format suitable
2627 * for a C initialization string. See the inc_version_list entry
2628 * in Porting/Glossary for more details.
2629 */
2630#define PERL_INC_VERSION_LIST NULL /**/
2631
2632/* INSTALL_USR_BIN_PERL:
2633 * This symbol, if defined, indicates that Perl is to be installed
2634 * also as /usr/bin/perl.
2635 */
2636/*#define INSTALL_USR_BIN_PERL / **/
2637
2638/* PERL_PRIfldbl:
2639 * This symbol, if defined, contains the string used by stdio to
2640 * format long doubles (format 'f') for output.
2641 */
2642/* PERL_PRIgldbl:
2643 * This symbol, if defined, contains the string used by stdio to
2644 * format long doubles (format 'g') for output.
2645 */
7428bafe
JH
2646/* PERL_PRIeldbl:
2647 * This symbol, if defined, contains the string used by stdio to
2648 * format long doubles (format 'e') for output.
2649 */
d08f2eab
JH
2650/* PERL_SCNfldbl:
2651 * This symbol, if defined, contains the string used by stdio to
2652 * format long doubles (format 'f') for input.
2653 */
3ebb1980
JH
2654/*#define PERL_PRIfldbl "llf" / **/
2655/*#define PERL_PRIgldbl "llg" / **/
7428bafe 2656/*#define PERL_PRIeldbl "lle" / **/
d08f2eab 2657/*#define PERL_SCNfldbl "llf" / **/
3ebb1980
JH
2658
2659/* Off_t:
2660 * This symbol holds the type used to declare offsets in the kernel.
2661 * It can be int, long, off_t, etc... It may be necessary to include
2662 * <sys/types.h> to get any typedef'ed information.
2663 */
2664/* LSEEKSIZE:
2665 * This symbol holds the number of bytes used by the Off_t.
2666 */
2667/* Off_t_size:
2668 * This symbol holds the number of bytes used by the Off_t.
2669 */
2670#define Off_t int /* <offset> type */
2671#define LSEEKSIZE 1 /* <offset> size */
2672#define Off_t_size 1 /* <offset> size */
2673
2674/* Free_t:
2675 * This variable contains the return type of free(). It is usually
2676 * void, but occasionally int.
2677 */
2678/* Malloc_t:
2679 * This symbol is the type of pointer returned by malloc and realloc.
2680 */
2681#define Malloc_t void * /**/
2682#define Free_t int /**/
2683
2684/* MYMALLOC:
2685 * This symbol, if defined, indicates that we're using our own malloc.
2686 */
2687/*#define MYMALLOC / **/
2688
2689/* Mode_t:
2690 * This symbol holds the type used to declare file modes
2691 * for systems calls. It is usually mode_t, but may be
2692 * int or unsigned short. It may be necessary to include <sys/types.h>
2693 * to get any typedef'ed information.
2694 */
2695#define Mode_t int /* file mode parameter for system calls */
2696
2697/* VAL_O_NONBLOCK:
2698 * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
2699 * non-blocking I/O for the file descriptor. Note that there is no way
2700 * back, i.e. you cannot turn it blocking again this way. If you wish to
2701 * alternatively switch between blocking and non-blocking, use the
2702 * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
2703 */
2704/* VAL_EAGAIN:
2705 * This symbol holds the errno error code set by read() when no data was
2706 * present on the non-blocking file descriptor.
2707 */
2708/* RD_NODATA:
2709 * This symbol holds the return code from read() when no data is present
2710 * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
2711 * not defined, then you can't distinguish between no data and EOF by
2712 * issuing a read(). You'll have to find another way to tell for sure!
2713 */
2714/* EOF_NONBLOCK:
2715 * This symbol, if defined, indicates to the C program that a read() on
2716 * a non-blocking file descriptor will return 0 on EOF, and not the value
2717 * held in RD_NODATA (-1 usually, in that case!).
2718 */
2719#define VAL_O_NONBLOCK O_NONBLOCK
2720#define VAL_EAGAIN EAGAIN
2721#define RD_NODATA -1
2722#undef EOF_NONBLOCK
2723
a7fea17f
JH
2724/* NEED_VA_COPY:
2725 * This symbol, if defined, indicates that the system stores
2726 * the variable argument list datatype, va_list, in a format
2727 * that cannot be copied by simple assignment, so that some
2728 * other means must be used when copying is required.
2729 * As such systems vary in their provision (or non-provision)
2730 * of copying mechanisms, handy.h defines a platform-
2731 * independent macro, Perl_va_copy(src, dst), to do the job.
2732 */
2733/*#define NEED_VA_COPY / **/
2734
3ebb1980
JH
2735/* Netdb_host_t:
2736 * This symbol holds the type used for the 1st argument
2737 * to gethostbyaddr().
2738 */
2739/* Netdb_hlen_t:
2740 * This symbol holds the type used for the 2nd argument
2741 * to gethostbyaddr().
2742 */
2743/* Netdb_name_t:
2744 * This symbol holds the type used for the argument to
2745 * gethostbyname().
2746 */
2747/* Netdb_net_t:
2748 * This symbol holds the type used for the 1st argument to
2749 * getnetbyaddr().
2750 */
2751#define Netdb_host_t const char * /**/
2752#define Netdb_hlen_t int /**/
2753#define Netdb_name_t const char * /**/
2754#define Netdb_net_t unsigned long /**/
2755
2756/* PERL_OTHERLIBDIRS:
2757 * This variable contains a colon-separated set of paths for the perl
2758 * binary to search for additional library files or modules.
2759 * These directories will be tacked to the end of @INC.
2760 * Perl will automatically search below each path for version-
2761 * and architecture-specific directories. See PERL_INC_VERSION_LIST
2762 * for more details.
2763 */
2764/*#define PERL_OTHERLIBDIRS "" / **/
2765
2766/* IVTYPE:
2767 * This symbol defines the C type used for Perl's IV.
2768 */
2769/* UVTYPE:
2770 * This symbol defines the C type used for Perl's UV.
2771 */
2772/* I8TYPE:
2773 * This symbol defines the C type used for Perl's I8.
2774 */
2775/* U8TYPE:
2776 * This symbol defines the C type used for Perl's U8.
2777 */
2778/* I16TYPE:
2779 * This symbol defines the C type used for Perl's I16.
2780 */
2781/* U16TYPE:
2782 * This symbol defines the C type used for Perl's U16.
2783 */
2784/* I32TYPE:
2785 * This symbol defines the C type used for Perl's I32.
2786 */
2787/* U32TYPE:
2788 * This symbol defines the C type used for Perl's U32.
2789 */
2790/* I64TYPE:
2791 * This symbol defines the C type used for Perl's I64.
2792 */
2793/* U64TYPE:
2794 * This symbol defines the C type used for Perl's U64.
2795 */
2796/* NVTYPE:
2797 * This symbol defines the C type used for Perl's NV.
2798 */
2799/* IVSIZE:
2800 * This symbol contains the sizeof(IV).
2801 */
2802/* UVSIZE:
2803 * This symbol contains the sizeof(UV).
2804 */
2805/* I8SIZE:
2806 * This symbol contains the sizeof(I8).
2807 */
2808/* U8SIZE:
2809 * This symbol contains the sizeof(U8).
2810 */
2811/* I16SIZE:
2812 * This symbol contains the sizeof(I16).
2813 */
2814/* U16SIZE:
2815 * This symbol contains the sizeof(U16).
2816 */
2817/* I32SIZE:
2818 * This symbol contains the sizeof(I32).
2819 */
2820/* U32SIZE:
2821 * This symbol contains the sizeof(U32).
2822 */
2823/* I64SIZE:
2824 * This symbol contains the sizeof(I64).
2825 */
2826/* U64SIZE:
2827 * This symbol contains the sizeof(U64).
2828 */
2829/* NVSIZE:
2830 * This symbol contains the sizeof(NV).
2831 */
2832/* NV_PRESERVES_UV:
2833 * This symbol, if defined, indicates that a variable of type NVTYPE
2834 * can preserve all the bits of a variable of type UVTYPE.
2835 */
2836/* NV_PRESERVES_UV_BITS:
2837 * This symbol contains the number of bits a variable of type NVTYPE
2838 * can preserve of a variable of type UVTYPE.
2839 */
2840#define IVTYPE long /**/
2841#define UVTYPE unsigned long /**/
2842#define I8TYPE char /**/
2843#define U8TYPE unsigned char /**/
2844#define I16TYPE short /**/
2845#define U16TYPE unsigned short /**/
2846#define I32TYPE long /**/
2847#define U32TYPE unsigned long /**/
2848#ifdef HAS_QUAD
2849#define I64TYPE int64_t /**/
2850#define U64TYPE uint64_t /**/
2851#endif
2852#define NVTYPE double /**/
2853#define IVSIZE 4 /**/
2854#define UVSIZE 4 /**/
2855#define I8SIZE 1 /**/
2856#define U8SIZE 1 /**/
2857#define I16SIZE 2 /**/
2858#define U16SIZE 2 /**/
2859#define I32SIZE 4 /**/
2860#define U32SIZE 4 /**/
2861#ifdef HAS_QUAD
2862#define I64SIZE 8 /**/
2863#define U64SIZE 8 /**/
2864#endif
2865#define NVSIZE 8 /**/
2866#undef NV_PRESERVES_UV
3096c11e 2867#define NV_PRESERVES_UV_BITS 0
3ebb1980
JH
2868
2869/* IVdf:
2870 * This symbol defines the format string used for printing a Perl IV
2871 * as a signed decimal integer.
2872 */
2873/* UVuf:
2874 * This symbol defines the format string used for printing a Perl UV
2875 * as an unsigned decimal integer.
2876 */
2877/* UVof:
2878 * This symbol defines the format string used for printing a Perl UV
2879 * as an unsigned octal integer.
2880 */
2881/* UVxf:
2882 * This symbol defines the format string used for printing a Perl UV
fd47df60
JH
2883 * as an unsigned hexadecimal integer in lowercase abcdef.
2884 */
159fae86
JH
2885/* UVXf:
2886 * This symbol defines the format string used for printing a Perl UV
2887 * as an unsigned hexadecimal integer in uppercase ABCDEF.
2888 */
fd47df60
JH
2889/* NVef:
2890 * This symbol defines the format string used for printing a Perl NV
2891 * using %e-ish floating point format.
2892 */
2893/* NVff:
2894 * This symbol defines the format string used for printing a Perl NV
2895 * using %f-ish floating point format.
2896 */
2897/* NVgf:
2898 * This symbol defines the format string used for printing a Perl NV
2899 * using %g-ish floating point format.
3ebb1980
JH
2900 */
2901#define IVdf "ld" /**/
2902#define UVuf "lu" /**/
2903#define UVof "lo" /**/
2904#define UVxf "lx" /**/
159fae86 2905#define UVXf "lX" /**/
fd47df60
JH
2906#define NVef "e" /**/
2907#define NVff "f" /**/
2908#define NVgf "g" /**/
3ebb1980
JH
2909
2910/* Pid_t:
2911 * This symbol holds the type used to declare process ids in the kernel.
2912 * It can be int, uint, pid_t, etc... It may be necessary to include
2913 * <sys/types.h> to get any typedef'ed information.
2914 */
2915#define Pid_t int /* PID type */
2916
2917/* PRIVLIB:
2918 * This symbol contains the name of the private library for this package.
2919 * The library is private in the sense that it needn't be in anyone's
2920 * execution path, but it should be accessible by the world. The program
2921 * should be prepared to do ~ expansion.
2922 */
2923/* PRIVLIB_EXP:
2924 * This symbol contains the ~name expanded version of PRIVLIB, to be used
2925 * in programs that are not prepared to deal with ~ expansion at run-time.
2926 */
ef71a6f5
JH
2927#define PRIVLIB "/usr/local/lib/perl5/5.7" /**/
2928#define PRIVLIB_EXP "/usr/local/lib/perl5/5.7" /**/
3ebb1980
JH
2929
2930/* PTRSIZE:
2931 * This symbol contains the size of a pointer, so that the C preprocessor
2932 * can make decisions based on it. It will be sizeof(void *) if
2933 * the compiler supports (void *); otherwise it will be
2934 * sizeof(char *).
2935 */
a24ffc0b 2936#define PTRSIZE 4 /**/
3ebb1980
JH
2937
2938/* Drand01:
2939 * This macro is to be used to generate uniformly distributed
2940 * random numbers over the range [0., 1.[. You may have to supply
2941 * an 'extern double drand48();' in your program since SunOS 4.1.3
2942 * doesn't provide you with anything relevant in it's headers.
2943 * See HAS_DRAND48_PROTO.
2944 */
2945/* Rand_seed_t:
2946 * This symbol defines the type of the argument of the
2947 * random seed function.
2948 */
2949/* seedDrand01:
2950 * This symbol defines the macro to be used in seeding the
2951 * random number generator (see Drand01).
2952 */
2953/* RANDBITS:
2954 * This symbol indicates how many bits are produced by the
2955 * function used to generate normalized random numbers.
2956 * Values include 15, 16, 31, and 48.
2957 */
2958#define Drand01() ((rand() & 0x7FFF) / (double) ((unsigned long)1 << 15)) /**/
2959#define Rand_seed_t int /**/
2960#define seedDrand01(x) srand((Rand_seed_t)x) /**/
2961#define RANDBITS 48 /**/
2962
2963/* SELECT_MIN_BITS:
2964 * This symbol holds the minimum number of bits operated by select.
2965 * That is, if you do select(n, ...), how many bits at least will be
2966 * cleared in the masks if some activity is detected. Usually this
2967 * is either n or 32*ceil(n/32), especially many little-endians do
2968 * the latter. This is only useful if you have select(), naturally.
2969 */
2970#define SELECT_MIN_BITS 32 /**/
2971
2972/* Select_fd_set_t:
2973 * This symbol holds the type used for the 2nd, 3rd, and 4th
2974 * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
2975 * is defined, and 'int *' otherwise. This is only useful if you
2976 * have select(), of course.
2977 */
2978#define Select_fd_set_t int /**/
2979
2980/* SIG_NAME:
2981 * This symbol contains a list of signal names in order of
2982 * signal number. This is intended
2983 * to be used as a static array initialization, like this:
2984 * char *sig_name[] = { SIG_NAME };
2985 * The signals in the list are separated with commas, and each signal
2986 * is surrounded by double quotes. There is no leading SIG in the signal
2987 * name, i.e. SIGQUIT is known as "QUIT".
2988 * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
2989 * etc., where nn is the actual signal number (e.g. NUM37).
2990 * The signal number for sig_name[i] is stored in sig_num[i].
2991 * The last element is 0 to terminate the list with a NULL. This
2992 * corresponds to the 0 at the end of the sig_num list.
2993 */
2994/* SIG_NUM:
2995 * This symbol contains a list of signal numbers, in the same order as the
2996 * SIG_NAME list. It is suitable for static array initialization, as in:
2997 * int sig_num[] = { SIG_NUM };
2998 * The signals in the list are separated with commas, and the indices
2999 * within that list and the SIG_NAME list match, so it's easy to compute
3000 * the signal name from a number or vice versa at the price of a small
3001 * dynamic linear lookup.
3002 * Duplicates are allowed, but are moved to the end of the list.
3003 * The signal number corresponding to sig_name[i] is sig_number[i].
3004 * if (i < NSIG) then sig_number[i] == i.
3005 * The last element is 0, corresponding to the 0 at the end of
3006 * the sig_name list.
3007 */
76d3c696
JH
3008/* SIG_SIZE:
3009 * This variable contains the number of elements of the sig_name
bbbf5d77 3010 * and sig_num arrays, excluding the final NULL entry.
76d3c696 3011 */
3ebb1980
JH
3012#define SIG_NAME 0 /**/
3013#define SIG_NUM 0 /**/
76d3c696 3014#define SIG_SIZE 1 /**/
3ebb1980
JH
3015
3016/* SITEARCH:
3017 * This symbol contains the name of the private library for this package.
3018 * The library is private in the sense that it needn't be in anyone's
3019 * execution path, but it should be accessible by the world. The program
3020 * should be prepared to do ~ expansion.
3021 * The standard distribution will put nothing in this directory.
3022 * After perl has been installed, users may install their own local
3023 * architecture-dependent modules in this directory with
3024 * MakeMaker Makefile.PL
3025 * or equivalent. See INSTALL for details.
3026 */
3027/* SITEARCH_EXP:
3028 * This symbol contains the ~name expanded version of SITEARCH, to be used
3029 * in programs that are not prepared to deal with ~ expansion at run-time.
3030 */
3031#define SITEARCH "" /**/
3032#define SITEARCH_EXP "" /**/
3033
3034/* SITELIB:
3035 * This symbol contains the name of the private library for this package.
3036 * The library is private in the sense that it needn't be in anyone's
3037 * execution path, but it should be accessible by the world. The program
3038 * should be prepared to do ~ expansion.
3039 * The standard distribution will put nothing in this directory.
3040 * After perl has been installed, users may install their own local
3041 * architecture-independent modules in this directory with
3042 * MakeMaker Makefile.PL
3043 * or equivalent. See INSTALL for details.
3044 */
3045/* SITELIB_EXP:
3046 * This symbol contains the ~name expanded version of SITELIB, to be used
3047 * in programs that are not prepared to deal with ~ expansion at run-time.
3048 */
3049/* SITELIB_STEM:
3050 * This define is SITELIB_EXP with any trailing version-specific component
3051 * removed. The elements in inc_version_list (inc_version_list.U) can
3052 * be tacked onto this variable to generate a list of directories to search.
3053 */
3054#define SITELIB "" /**/
3055#define SITELIB_EXP "" /**/
3056#define SITELIB_STEM "" /**/
3057
3058/* Size_t_size:
3059 * This symbol holds the size of a Size_t in bytes.
3060 */
3061#define Size_t_size 1 /* */
3062
3063/* Size_t:
3064 * This symbol holds the type used to declare length parameters
3065 * for string functions. It is usually size_t, but may be
3066 * unsigned long, int, etc. It may be necessary to include
3067 * <sys/types.h> to get any typedef'ed information.
3068 */
3069#define Size_t int /* length paramater for string functions */
3070
3071/* Sock_size_t:
3072 * This symbol holds the type used for the size argument of
3073 * various socket calls (just the base type, not the pointer-to).
3074 */
3075#define Sock_size_t int /**/
3076
3077/* SSize_t:
3078 * This symbol holds the type used by functions that return
3079 * a count of bytes or an error condition. It must be a signed type.
3080 * It is usually ssize_t, but may be long or int, etc.
3081 * It may be necessary to include <sys/types.h> or <unistd.h>
3082 * to get any typedef'ed information.
3083 * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
3084 */
3085#define SSize_t int /* signed count of bytes */
3086
3087/* STARTPERL:
3088 * This variable contains the string to put in front of a perl
3089 * script to make sure (one hopes) that it runs with perl and not
3090 * some shell.
3091 */
3092#define STARTPERL "" /**/
3093
a7fea17f
JH
3094/* STDCHAR:
3095 * This symbol is defined to be the type of char used in stdio.h.
3096 * It has the values "unsigned char" or "char".
3097 */
3098#define STDCHAR char /**/
3099
3ebb1980
JH
3100/* HAS_STDIO_STREAM_ARRAY:
3101 * This symbol, if defined, tells that there is an array
3102 * holding the stdio streams.
3103 */
3104/* STDIO_STREAM_ARRAY:
3105 * This symbol tells the name of the array holding the stdio streams.
3106 * Usual values include _iob, __iob, and __sF.
3107 */
3108/*#define HAS_STDIO_STREAM_ARRAY / **/
3109#define STDIO_STREAM_ARRAY
3110
3111/* Uid_t_f:
3112 * This symbol defines the format string used for printing a Uid_t.
3113 */
3114#define Uid_t_f "lu" /**/
3115
3116/* Uid_t_sign:
3117 * This symbol holds the signedess of a Uid_t.
3118 * 1 for unsigned, -1 for signed.
3119 */
3120#define Uid_t_sign 1 /* UID sign */
3121
3122/* Uid_t_size:
3123 * This symbol holds the size of a Uid_t in bytes.
3124 */
3125#define Uid_t_size 4 /* UID size */
3126
3127/* Uid_t:
3128 * This symbol holds the type used to declare user ids in the kernel.
3129 * It can be int, ushort, uid_t, etc... It may be necessary to include
3130 * <sys/types.h> to get any typedef'ed information.
3131 */
3132#define Uid_t int /* UID type */
3133
3134/* USE_64_BIT_INT:
3135 * This symbol, if defined, indicates that 64-bit integers should
3136 * be used when available. If not defined, the native integers
3137 * will be employed (be they 32 or 64 bits). The minimal possible
3138 * 64-bitness is used, just enough to get 64-bit integers into Perl.
3139 * This may mean using for example "long longs", while your memory
3140 * may still be limited to 2 gigabytes.
3141 */
3142/* USE_64_BIT_ALL:
3143 * This symbol, if defined, indicates that 64-bit integers should
3144 * be used when available. If not defined, the native integers
3145 * will be used (be they 32 or 64 bits). The maximal possible
3146 * 64-bitness is employed: LP64 or ILP64, meaning that you will
3147 * be able to use more than 2 gigabytes of memory. This mode is
3148 * even more binary incompatible than USE_64_BIT_INT. You may not
3149 * be able to run the resulting executable in a 32-bit CPU at all or
3150 * you may need at least to reboot your OS to 64-bit mode.
3151 */
3152#ifndef USE_64_BIT_INT
3153/*#define USE_64_BIT_INT / **/
3154#endif
3155
3156#ifndef USE_64_BIT_ALL
3157/*#define USE_64_BIT_ALL / **/
3158#endif
3159
3160/* USE_LARGE_FILES:
3161 * This symbol, if defined, indicates that large file support
3162 * should be used when available.
3163 */
3164#ifndef USE_LARGE_FILES
3165/*#define USE_LARGE_FILES / **/
3166#endif
3167
3168/* USE_LONG_DOUBLE:
3169 * This symbol, if defined, indicates that long doubles should
3170 * be used when available.
3171 */
3172#ifndef USE_LONG_DOUBLE
3173/*#define USE_LONG_DOUBLE / **/
3174#endif
3175
3176/* USE_MORE_BITS:
3177 * This symbol, if defined, indicates that 64-bit interfaces and
3178 * long doubles should be used when available.
3179 */
3180#ifndef USE_MORE_BITS
3181/*#define USE_MORE_BITS / **/
3182#endif
3183
3184/* MULTIPLICITY:
3185 * This symbol, if defined, indicates that Perl should
3186 * be built to use multiplicity.
3187 */
3188#ifndef MULTIPLICITY
3189/*#define MULTIPLICITY / **/
3190#endif
3191
3192/* USE_PERLIO:
3193 * This symbol, if defined, indicates that the PerlIO abstraction should
3194 * be used throughout. If not defined, stdio should be
3195 * used in a fully backward compatible manner.
3196 */
3197#ifndef USE_PERLIO
3198/*#define USE_PERLIO / **/
3199#endif
3200
3201/* USE_SOCKS:
3202 * This symbol, if defined, indicates that Perl should
3203 * be built to use socks.
3204 */
3205#ifndef USE_SOCKS
3206/*#define USE_SOCKS / **/
3207#endif
3208
3209/* USE_ITHREADS:
3210 * This symbol, if defined, indicates that Perl should be built to
3211 * use the interpreter-based threading implementation.
3212 */
3213/* USE_5005THREADS:
3214 * This symbol, if defined, indicates that Perl should be built to
3215 * use the 5.005-based threading implementation.
3216 */
3217/* OLD_PTHREADS_API:
3218 * This symbol, if defined, indicates that Perl should
3219 * be built to use the old draft POSIX threads API.
3220 */
3221/*#define USE_5005THREADS / **/
3222/*#define USE_ITHREADS / **/
3223#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
3224#define USE_THREADS /* until src is revised*/
3225#endif
3226/*#define OLD_PTHREADS_API / **/
3227
3228/* PERL_VENDORARCH:
3229 * If defined, this symbol contains the name of a private library.
3230 * The library is private in the sense that it needn't be in anyone's
3231 * execution path, but it should be accessible by the world.
3232 * It may have a ~ on the front.
3233 * The standard distribution will put nothing in this directory.
3234 * Vendors who distribute perl may wish to place their own
3235 * architecture-dependent modules and extensions in this directory with
3236 * MakeMaker Makefile.PL INSTALLDIRS=vendor
3237 * or equivalent. See INSTALL for details.
3238 */
3239/* PERL_VENDORARCH_EXP:
3240 * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
3241 * in programs that are not prepared to deal with ~ expansion at run-time.
3242 */
a7fea17f
JH
3243/*#define PERL_VENDORARCH "" / **/
3244/*#define PERL_VENDORARCH_EXP "" / **/
3ebb1980
JH
3245
3246/* PERL_VENDORLIB_EXP:
3247 * This symbol contains the ~name expanded version of VENDORLIB, to be used
3248 * in programs that are not prepared to deal with ~ expansion at run-time.
3249 */
3250/* PERL_VENDORLIB_STEM:
3251 * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
3252 * removed. The elements in inc_version_list (inc_version_list.U) can
3253 * be tacked onto this variable to generate a list of directories to search.
3254 */
3255/*#define PERL_VENDORLIB_EXP "" / **/
3256/*#define PERL_VENDORLIB_STEM "" / **/
3257
3258/* VOIDFLAGS:
3259 * This symbol indicates how much support of the void type is given by this
3260 * compiler. What various bits mean:
3261 *
3262 * 1 = supports declaration of void
3263 * 2 = supports arrays of pointers to functions returning void
3264 * 4 = supports comparisons between pointers to void functions and
3265 * addresses of void functions
3266 * 8 = suports declaration of generic void pointers
3267 *
3268 * The package designer should define VOIDUSED to indicate the requirements
3269 * of the package. This can be done either by #defining VOIDUSED before
3270 * including config.h, or by defining defvoidused in Myinit.U. If the
3271 * latter approach is taken, only those flags will be tested. If the
3272 * level of void support necessary is not present, defines void to int.
3273 */
3274#ifndef VOIDUSED
3275#define VOIDUSED 1
3276#endif
3277#define VOIDFLAGS 1
3278#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
3279#define void int /* is void to be avoided? */
3280#define M_VOID /* Xenix strikes again */
3281#endif
3282
3283/* PERL_XS_APIVERSION:
3284 * This variable contains the version of the oldest perl binary
3285 * compatible with the present perl. perl.c:incpush() and
3286 * lib/lib.pm will automatically search in for older
3287 * directories across major versions back to xs_apiversion.
3288 * This is only useful if you have a perl library directory tree
3289 * structured like the default one.
3290 * See INSTALL for how this works.
3291 * The versioned site_perl directory was introduced in 5.005,
3292 * so that is the lowest possible value.
3293 * Since this can depend on compile time options (such as
3294 * bincompat) it is set by Configure. Other non-default sources
3295 * of potential incompatibility, such as multiplicity, threads,
3296 * debugging, 64bits, sfio, etc., are not checked for currently,
3297 * though in principle we could go snooping around in old
3298 * Config.pm files.
3299 */
3300/* PERL_PM_APIVERSION:
3301 * This variable contains the version of the oldest perl
3302 * compatible with the present perl. (That is, pure perl modules
3303 * written for pm_apiversion will still work for the current
3304 * version). perl.c:incpush() and lib/lib.pm will automatically
3305 * search in for older directories across major versions
3306 * back to pm_apiversion. This is only useful if you have a perl
3307 * library directory tree structured like the default one. The
3308 * versioned site_perl library was introduced in 5.005, so that's
3309 * the default setting for this variable. It's hard to imagine
3310 * it changing before Perl6. It is included here for symmetry
3311 * with xs_apiveprsion -- the searching algorithms will
3312 * (presumably) be similar.
3313 * See the INSTALL file for how this works.
3314 */
3315#define PERL_XS_APIVERSION "5.005"
3316#define PERL_PM_APIVERSION "5.005"
3317
e561a5ff
JH
3318/* HAS_SIGPROCMASK:
3319 * This symbol, if defined, indicates that the sigprocmask
3320 * system call is available to examine or change the signal mask
3321 * of the calling process.
3322 */
3323/*#define HAS_SIGPROCMASK / **/
3324
49a78c82
JH
3325/* HAS_SOCKATMARK:
3326 * This symbol, if defined, indicates that the sockatmark routine is
3327 * available to test whether a socket is at the out-of-band mark.
3328 */
3329/*#define HAS_SOCKATMARK / **/
3330
b3c85772
JH
3331/* HAS_STRFTIME:
3332 * This symbol, if defined, indicates that the strftime routine is
3333 * available to do time formatting.
3334 */
3335/*#define HAS_STRFTIME / **/
3336
4e0554ec
JH
3337/* U32_ALIGNMENT_REQUIRED:
3338 * This symbol, if defined, indicates that you must access
3339 * character data through U32-aligned pointers.
3340 */
3341#define U32_ALIGNMENT_REQUIRED /**/
3342
3ebb1980 3343#endif