Commit | Line | Data |
---|---|---|
8ed6d636 VK |
1 | #! /bin/sh |
2 | ||
3 | # This file is used to create generic Makefile for cross-compile | |
4 | # (borrowed from Makefile.SH) | |
5 | # (now only small changes are done to establish cross-compilation) | |
6 | # miniperl removed from here, as this is built on HOST | |
7 | ||
8 | Makefile=Makefile-cross-$CROSS_NAME | |
9 | ||
10 | . Cross/config-${CROSS_NAME}.sh | |
11 | ||
12 | # H.Merijn Brand [17 Feb 2004] | |
13 | # This comment is just to ensure that Configure will find variables that | |
14 | # are removed/replaced in patches on blead, but are still needed in the | |
8534470b | 15 | # 5.8.x, 5.6.x and 5.005.x maintenance tracks. |
8ed6d636 | 16 | # metaconfig -m will scan all .SH files on this level (not deeper), and |
c67aee7a | 17 | # not in other subfolders. This file is as good as any .SH |
8ed6d636 VK |
18 | # patch references |
19 | # #22227 $baserev | |
20 | # #22302 $yacc $byacc | |
21 | ||
22 | # H.Merijn Brand [30 Oct 2004] | |
23 | # Mentioned for the same reason for future reference | |
24 | # #23434 $d_strlcat $d_strlcpy | |
25 | ||
26 | : This forces SH files to create target in same directory as SH file. | |
27 | : This is so that make depend always knows where to find SH derivatives. | |
28 | case "$0" in | |
29 | */*) cd `expr X$0 : 'X\(.*\)/'` ;; | |
30 | esac | |
31 | ||
8ed6d636 VK |
32 | linklibperl='$(LIBPERL)' |
33 | shrpldflags='$(LDDLFLAGS)' | |
34 | ldlibpth='' | |
35 | DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB' | |
36 | case "$useshrplib" in | |
37 | true) | |
38 | # Prefix all runs of 'miniperl' and 'perl' with | |
39 | # $ldlibpth so that ./perl finds *this* shared libperl. | |
40 | case "$LD_LIBRARY_PATH" in | |
41 | '') | |
42 | ldlibpth="LD_LIBRARY_PATH=`pwd`";; | |
43 | *) | |
44 | ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";; | |
45 | esac | |
46 | ||
47 | pldlflags="$cccdlflags" | |
3b333d01 | 48 | static_ldflags='' |
8ed6d636 VK |
49 | case "${osname}${osvers}" in |
50 | next4*) | |
51 | ld=libtool | |
52 | lddlflags="-dynamic -undefined warning -framework System \ | |
53 | -compatibility_version 1 -current_version $patchlevel \ | |
54 | -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@" | |
55 | ;; | |
7eb35c03 | 56 | darwin*) |
8ed6d636 VK |
57 | shrpldflags="${ldflags} -dynamiclib \ |
58 | -compatibility_version \ | |
59 | ${api_revision}.${api_version}.${api_subversion} \ | |
60 | -current_version \ | |
61 | ${revision}.${patchlevel}.${subversion} \ | |
62 | -install_name \$(shrpdir)/\$@" | |
63 | ;; | |
64 | cygwin*) | |
65 | linklibperl="-lperl" | |
66 | ;; | |
67 | sunos*) | |
68 | linklibperl="-lperl" | |
69 | ;; | |
2af44768 | 70 | netbsd*|freebsd[234]*|openbsd*|dragonfly*|bitrig*) |
8ed6d636 VK |
71 | linklibperl="-L. -lperl" |
72 | ;; | |
73 | interix*) | |
74 | linklibperl="-L. -lperl" | |
75 | shrpldflags="$shrpldflags -Wl,--image-base,0x57000000" | |
76 | ;; | |
77 | linux*) | |
78 | shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" | |
79 | ;; | |
80 | aix*) | |
81 | shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp" | |
82 | case "$osvers" in | |
83 | 3*) shrpldflags="$shrpldflags -e _nostart" | |
84 | ;; | |
85 | *) shrpldflags="$shrpldflags -b noentry" | |
86 | ;; | |
87 | esac | |
88 | shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" | |
89 | linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl" | |
90 | ;; | |
91 | hpux*) | |
92 | linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl" | |
93 | ;; | |
94 | os390*) | |
95 | shrpldflags='-W l,XPLINK,dll' | |
96 | linklibperl='libperl.x' | |
97 | DPERL_EXTERNAL_GLOB='' | |
98 | ;; | |
99 | esac | |
100 | case "$ldlibpthname" in | |
101 | '') ;; | |
102 | *) | |
103 | case "$osname" in | |
104 | os2) | |
105 | ldlibpth='' | |
106 | ;; | |
107 | *) | |
108 | eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\"" | |
109 | ;; | |
110 | esac | |
111 | # Strip off any trailing :'s | |
112 | ldlibpth=`echo $ldlibpth | sed 's/:*$//'` | |
113 | ;; | |
114 | esac | |
115 | ||
116 | case "$ldlibpth" in | |
117 | # Protect any spaces | |
118 | *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;; | |
119 | esac | |
120 | ||
121 | case "$osname" in | |
122 | linux) | |
123 | # If there is a pre-existing $libperl from a previous | |
124 | # installation, Linux needs to use LD_PRELOAD to | |
125 | # override the LD_LIBRARY_PATH setting. See the | |
126 | # INSTALL file, under "Building a shared perl library". | |
127 | # If there is no pre-existing $libperl, we don't need | |
128 | # to do anything further. | |
129 | if test -f $archlib/CORE/$libperl; then | |
130 | rm -f preload | |
131 | cat <<'EOT' > preload | |
132 | #! /bin/sh | |
133 | lib=$1 | |
134 | shift | |
135 | test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD" | |
136 | exec "$@" | |
137 | EOT | |
138 | chmod 755 preload | |
139 | ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl" | |
140 | fi | |
141 | ;; | |
142 | os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth" | |
143 | ;; | |
144 | esac | |
145 | ||
146 | ;; | |
147 | ||
148 | *) pldlflags='' | |
3b333d01 | 149 | static_ldflags='CCCDLFLAGS=' |
8ed6d636 VK |
150 | ;; |
151 | esac | |
152 | ||
153 | : Prepare dependency lists for Makefile. | |
154 | dynamic_list=' ' | |
155 | extra_dep='' | |
156 | for f in $dynamic_ext; do | |
157 | : the dependency named here will never exist | |
158 | base=`echo "$f" | sed 's/.*\///'` | |
159 | this_target="lib/auto/$f/$base.$dlext" | |
160 | dynamic_list="$dynamic_list $this_target" | |
161 | ||
162 | : Parallel makes reveal that we have some interdependencies | |
163 | case $f in | |
164 | Math/BigInt/FastCalc) extra_dep="$extra_dep | |
165 | $this_target: lib/auto/List/Util/Util.$dlext" ;; | |
166 | Unicode/Normalize) extra_dep="$extra_dep | |
167 | $this_target: uni.data" ;; | |
168 | esac | |
169 | done | |
170 | ||
171 | static_list=' ' | |
172 | for f in $static_ext; do | |
173 | base=`echo "$f" | sed 's/.*\///'` | |
174 | static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)" | |
175 | done | |
176 | ||
177 | nonxs_list=' ' | |
178 | for f in $nonxs_ext; do | |
179 | base=`echo "$f" | sed 's/.*\///'` | |
180 | nonxs_list="$nonxs_list ext/$f/pm_to_blib" | |
181 | done | |
182 | ||
183 | echo "Extracting $Makefile (with variable substitutions)" | |
184 | $spitshell >$Makefile <<!GROK!THIS! | |
185 | # $Makefile.SH | |
186 | # This file is derived from $Makefile.SH. Any changes made here will | |
187 | # be lost the next time you run Configure. | |
188 | # $Makefile is used to generate $firstmakefile. The only difference | |
189 | # is that $firstmakefile has the dependencies filled in at the end. | |
190 | ||
191 | CC = $cc | |
192 | LD = $ld | |
193 | ||
194 | LDFLAGS = $ldflags | |
195 | CLDFLAGS = $ldflags | |
196 | ||
197 | mallocsrc = $mallocsrc | |
198 | mallocobj = $mallocobj | |
8ed6d636 VK |
199 | LNS = $lns |
200 | # NOTE: some systems don't grok "cp -f". XXX Configure test needed? | |
201 | CPS = $cp | |
202 | RMS = rm -f | |
203 | ranlib = $ranlib | |
204 | ||
205 | # The following are mentioned only to make metaconfig include the | |
206 | # appropriate questions in Configure. If you want to change these, | |
207 | # edit config.sh instead, or specify --man1dir=/wherever on | |
208 | # installman commandline. | |
209 | bin = $installbin | |
210 | scriptdir = $scriptdir | |
211 | shrpdir = $archlibexp/CORE | |
212 | privlib = $installprivlib | |
213 | man1dir = $man1dir | |
214 | man1ext = $man1ext | |
215 | man3dir = $man3dir | |
216 | man3ext = $man3ext | |
217 | ||
218 | # The following are used to build and install shared libraries for | |
219 | # dynamic loading. | |
220 | LDDLFLAGS = $lddlflags | |
221 | SHRPLDFLAGS = $shrpldflags | |
222 | CCDLFLAGS = $ccdlflags | |
223 | DLSUFFIX = .$dlext | |
224 | PLDLFLAGS = $pldlflags | |
225 | LIBPERL = $libperl | |
226 | LLIBPERL= $linklibperl | |
227 | SHRPENV = $shrpenv | |
228 | ||
229 | # Static targets are ordinarily built without CCCDLFLAGS. However, | |
230 | # if building a shared libperl.so that might later be linked into | |
231 | # another application, then it might be appropriate to also build static | |
232 | # extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC | |
3b333d01 NC |
233 | # for GNU cc). |
234 | STATIC_LDFLAGS = $static_ldflags | |
8ed6d636 VK |
235 | |
236 | # The following is used to include the current directory in | |
237 | # the dynamic loader path you are building a shared libperl. | |
238 | LDLIBPTH = $ldlibpth | |
239 | ||
240 | dynamic_ext = $dynamic_list | |
241 | static_ext = $static_list | |
242 | nonxs_ext = $nonxs_list | |
243 | ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext) | |
244 | DYNALOADER = DynaLoader\$(OBJ_EXT) | |
245 | ||
246 | libs = $perllibs $cryptlib | |
247 | ||
cc69b689 | 248 | public = perl\$(EXE_EXT) utilities translators |
8ed6d636 VK |
249 | |
250 | shellflags = $shellflags | |
251 | ||
252 | # This is set to MAKE=$make if your $make command doesn't | |
253 | # do it for you. | |
254 | $make_set_make | |
255 | ||
256 | # Mention $gmake here so it gets probed for by Configure. | |
257 | ||
258 | # These variables may need to be manually set for non-Unix systems. | |
259 | AR = $full_ar | |
260 | EXE_EXT = $_exe | |
261 | LIB_EXT = $_a | |
262 | OBJ_EXT = $_o | |
263 | PATH_SEP = $p_ | |
264 | ||
265 | # If you're going to use valgrind and it can't be invoked as plain valgrind | |
266 | # then you'll need to change this, or override it on the make command line. | |
267 | VALGRIND=valgrind | |
268 | ||
269 | FIRSTMAKEFILE = $firstmakefile | |
270 | ||
271 | # Any special object files needed by this architecture, e.g. os2/os2.obj | |
272 | ARCHOBJS = $archobjs | |
273 | ||
274 | .SUFFIXES: .c \$(OBJ_EXT) .i .s | |
275 | ||
276 | # grrr | |
277 | SHELL = $sh | |
278 | ||
279 | # how to tr(anslate) newlines | |
280 | TRNL = '$trnl' | |
281 | ||
282 | OPTIMIZE = $optimize | |
283 | ||
284 | EXTRAS = $extras | |
285 | ||
286 | INSTALLPREFIXEXP = $prefix | |
287 | ||
288 | !GROK!THIS! | |
289 | # not used by Makefile but by installperl; | |
290 | # mentioned here so that metaconfig picks these up | |
291 | # $installusrbinperl | |
292 | # $versiononly | |
293 | ||
294 | case "${osname}:${osvers}" in | |
295 | darwin:*) | |
296 | $spitshell >>$Makefile <<EOF | |
297 | ||
298 | # Your locales are broken (osname $osname, osvers $osvers) | |
299 | # and to avoid the numerous | |
300 | # perl: warning: Setting locale failed. | |
301 | # warnings during the build process we reset the locale variables. | |
302 | ||
303 | LC_ALL=C | |
304 | LANG=C | |
305 | LANGUAGE=C | |
306 | EOF | |
307 | ;; | |
308 | esac | |
309 | ||
310 | $spitshell >>$Makefile <<!GROK!THIS! | |
311 | CROSS_NAME = ${CROSS_NAME} | |
312 | CROSS_LIB = xlib/${CROSS_NAME} | |
313 | ||
314 | CCCMD = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$@\` | |
315 | ||
316 | CCCMDSRC = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$<\` | |
317 | ||
318 | !GROK!THIS! | |
319 | ||
320 | ## In the following dollars and backticks do not need the extra backslash. | |
321 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
322 | ||
608969de | 323 | CONFIGPM = xlib/$(CROSS_NAME)/Config.pm |
8ed6d636 | 324 | |
5e4c4c91 | 325 | private = preplibrary $(CONFIGPM) $(CROSS_LIB)/Config.pod lib/buildcustomize.pl |
8ed6d636 | 326 | |
cbeaa189 | 327 | shextract = Makefile cflags config.h makedepend \ |
8ed6d636 VK |
328 | makedir myconfig writemain pod/Makefile |
329 | ||
467132b9 | 330 | addedbyconf = UU $(shextract) lib/lib.pm pstruct |
8ed6d636 VK |
331 | |
332 | # Unicode data files generated by mktables | |
3df51b85 KW |
333 | unidatafiles = lib/unicore/Decomposition.pl lib/unicore/TestProp.pl \ |
334 | lib/unicore/CombiningClass.pl lib/unicore/Name.pl \ | |
1a234f2b | 335 | lib/unicore/UCD.pl lib/unicore/Name.pm \ |
3e344d15 | 336 | lib/unicore/Heavy.pl lib/unicore/mktables.lst |
8ed6d636 VK |
337 | |
338 | # Directories of Unicode data files generated by mktables | |
339 | unidatadirs = lib/unicore/To lib/unicore/lib | |
340 | ||
341 | h1 = EXTERN.h INTERN.h XSUB.h av.h xconfig.h cop.h cv.h dosish.h | |
4d3a042d | 342 | h2 = embed.h form.h gv.h handy.h hv.h hv_func.h keywords.h mg.h op.h opcode.h |
8ed6d636 VK |
343 | h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h |
344 | h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h | |
345 | h5 = utf8.h warnings.h | |
346 | h = $(h1) $(h2) $(h3) $(h4) $(h5) | |
347 | ||
8b371338 | 348 | c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro_core.c perl.c |
8ed6d636 | 349 | c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c |
26ea9e12 | 350 | c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c |
8ed6d636 | 351 | c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c |
b5bbe64a | 352 | c5 = $(mallocsrc) |
8ed6d636 VK |
353 | |
354 | c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c | |
355 | ||
8b371338 | 356 | obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro_core$(OBJ_EXT) |
8ed6d636 | 357 | obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) perl$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT) |
48462a74 | 358 | obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) |
8ed6d636 VK |
359 | |
360 | obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS) | |
361 | ||
362 | lintflags = \ | |
363 | -b \ | |
364 | -n \ | |
365 | -p \ | |
366 | -Ncheck=%all \ | |
367 | -Nlevel=4 \ | |
368 | -errchk=parentheses \ | |
369 | -errhdr=%all \ | |
370 | -errfmt=src \ | |
371 | -errtags \ | |
372 | -erroff=E_ASSIGN_NARROW_CONV \ | |
373 | -erroff=E_BAD_PTR_CAST \ | |
374 | -erroff=E_BAD_PTR_CAST_ALIGN \ | |
375 | -erroff=E_BAD_PTR_INT_COMBINATION \ | |
376 | -erroff=E_BAD_SIGN_EXTEND \ | |
377 | -erroff=E_BLOCK_DECL_UNUSED \ | |
378 | -erroff=E_CASE_FALLTHRU \ | |
379 | -erroff=E_CONST_EXPR \ | |
380 | -erroff=E_CONSTANT_CONDITION \ | |
381 | -erroff=E_END_OF_LOOP_CODE_NOT_REACHED \ | |
382 | -erroff=E_EQUALITY_NOT_ASSIGNMENT \ | |
383 | -erroff=E_EXPR_NULL_EFFECT \ | |
384 | -erroff=E_FALSE_LOGICAL_EXPR \ | |
385 | -erroff=E_INCL_NUSD \ | |
386 | -erroff=E_LOOP_EMPTY \ | |
387 | -erroff=E_MAIN_PARAM \ | |
388 | -erroff=E_POINTER_TO_OBJECT \ | |
389 | -erroff=E_PTRDIFF_OVERFLOW \ | |
390 | -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \ | |
391 | -erroff=E_STATIC_UNUSED \ | |
392 | -erroff=E_TRUE_LOGICAL_EXPR | |
393 | ||
394 | splintflags = \ | |
395 | -I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \ | |
396 | -D__builtin_va_list=va_list \ | |
397 | -Dsigjmp_buf=jmp_buf \ | |
398 | -warnposix \ | |
399 | \ | |
400 | +boolint \ | |
401 | +charintliteral \ | |
402 | -fixedformalarray \ | |
403 | -mustfreefresh \ | |
404 | -nestedextern \ | |
405 | -predboolint \ | |
406 | -predboolothers \ | |
407 | -preproc \ | |
408 | -boolops \ | |
409 | -shadow \ | |
410 | -nullstate \ | |
411 | +longintegral \ | |
412 | +matchanyintegral \ | |
413 | -type \ | |
414 | \ | |
415 | +line-len 999 \ | |
416 | +weak | |
417 | ||
418 | splintfiles = $(c1) | |
419 | ||
420 | .c$(OBJ_EXT): | |
421 | $(CCCMD) -I$(CROSS_LIB) $(PLDLFLAGS) $*.c | |
422 | ||
423 | .c.i: | |
424 | $(CCCMDSRC) -E $*.c > $*.i | |
425 | ||
426 | .c.s: | |
427 | $(CCCMDSRC) -S $*.c | |
428 | ||
429 | all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make | |
430 | @echo " "; | |
431 | @echo " Everything is up to date. Type '$(MAKE) test' to run test suite." | |
432 | ||
433 | .PHONY: all | |
434 | ||
435 | ||
436 | # This is now done by installman only if you actually want the man pages. | |
437 | # @echo " "; echo " Making docs"; cd pod; $(MAKE) all; | |
438 | ||
439 | # Phony target to force checking subdirectories. | |
440 | # Apparently some makes require an action for the FORCE target. | |
441 | .PHONY: FORCE | |
442 | FORCE: | |
443 | @sh -c true | |
444 | !NO!SUBS! | |
445 | $spitshell >>$Makefile <<!GROK!THIS! | |
446 | ||
447 | # We do a copy of the op.c instead of a symlink because gcc gets huffy | |
448 | # if we have a symlink forest to another disk (it complains about too many | |
449 | # levels of symbolic links, even if we have only two) | |
450 | ||
451 | opmini.c: op.c | |
452 | \$(RMS) opmini.c | |
453 | \$(CPS) op.c opmini.c | |
454 | ||
455 | opmini\$(OBJ_EXT): opmini.c | |
456 | \$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c | |
457 | ||
458 | globals\$(OBJ_EXT): | |
459 | ||
460 | !GROK!THIS! | |
461 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
462 | miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h | |
463 | $(CCCMD) $(PLDLFLAGS) $*.c | |
464 | ||
465 | perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE) | |
466 | sh writemain $(DYNALOADER) $(static_ext) > perlmain.c | |
467 | ||
468 | !NO!SUBS! | |
469 | case "$osname" in | |
470 | cygwin) | |
471 | ;; # Let cygwin/Makefile.SHs do its work. | |
472 | *) | |
473 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
474 | perlmain$(OBJ_EXT): perlmain.c | |
475 | $(CCCMD) $(PLDLFLAGS) $*.c | |
476 | ||
477 | !NO!SUBS! | |
478 | ;; | |
479 | esac | |
480 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
481 | # The file ext.libs is a list of libraries that must be linked in | |
482 | # for static extensions, e.g. -lm -lgdbm, etc. The individual | |
483 | # static extension Makefile's add to it. | |
484 | ext.libs: $(static_ext) | |
485 | -@test -f ext.libs || touch ext.libs | |
486 | ||
487 | !NO!SUBS! | |
488 | ||
489 | # How to build libperl. This is still rather convoluted. | |
490 | # Load up custom Makefile.SH fragment for shared loading and executables: | |
491 | case "$osname" in | |
492 | *) | |
493 | Makefile_s="$osname/Makefile.SHs" | |
494 | ;; | |
495 | esac | |
496 | ||
497 | case "$osname" in | |
498 | aix) | |
499 | $spitshell >>$Makefile <<!GROK!THIS! | |
500 | LIBS = $perllibs | |
501 | # In AIX we need to change this for building Perl itself from | |
502 | # its earlier definition (which is for building external | |
503 | # extensions *after* Perl has been built and installed) | |
504 | CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'` | |
505 | ||
506 | !GROK!THIS! | |
507 | case "$useshrplib" in | |
508 | define|true|[yY]*) | |
509 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
510 | ||
511 | LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT) | |
512 | MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT) | |
513 | ||
514 | $(LIBPERL_NONSHR): $(obj) | |
515 | $(RMS) $(LIBPERL_NONSHR) | |
516 | $(AR) rcu $(LIBPERL_NONSHR) $(obj) | |
517 | ||
518 | $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) | |
519 | $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \ | |
520 | opmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS) | |
521 | ||
522 | MINIPERLEXP = $(MINIPERL_NONSHR) | |
523 | ||
524 | LIBPERLEXPORT = perl.exp | |
525 | ||
526 | !NO!SUBS! | |
527 | ||
528 | ;; | |
529 | *) | |
530 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
531 | MINIPERLEXP = miniperl$(EXE_EXT) | |
532 | ||
533 | PERLEXPORT = perl.exp | |
534 | ||
535 | !NO!SUBS! | |
536 | ;; | |
537 | esac | |
538 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
539 | perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) | |
540 | ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp | |
541 | ||
542 | !NO!SUBS! | |
543 | ;; | |
544 | os2) | |
545 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
546 | MINIPERLEXP = miniperl | |
547 | ||
548 | perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map | |
549 | ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def | |
550 | ||
551 | !NO!SUBS! | |
552 | ;; | |
553 | esac | |
554 | ||
555 | if test -r $Makefile_s ; then | |
556 | . $Makefile_s | |
557 | $spitshell >>$Makefile <<!GROK!THIS! | |
558 | ||
559 | $Makefile: $Makefile_s | |
560 | !GROK!THIS! | |
561 | else | |
562 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
563 | $(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT) | |
564 | !NO!SUBS! | |
565 | case "$useshrplib" in | |
566 | true) | |
567 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
568 | rm -f $@ | |
569 | $(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs) | |
570 | !NO!SUBS! | |
571 | case "$osname" in | |
572 | aix) | |
573 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
574 | rm -f libperl$(OBJ_EXT) | |
575 | mv $@ libperl$(OBJ_EXT) | |
576 | $(AR) qv $(LIBPERL) libperl$(OBJ_EXT) | |
577 | !NO!SUBS! | |
578 | ;; | |
579 | esac | |
580 | ;; | |
581 | *) | |
582 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
583 | rm -f $(LIBPERL) | |
584 | $(AR) rcu $(LIBPERL) $(obj) $(DYNALOADER) | |
585 | @$(ranlib) $(LIBPERL) | |
586 | !NO!SUBS! | |
587 | ;; | |
588 | esac | |
589 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
590 | ||
591 | # How to build executables. | |
592 | ||
593 | # The $& notation tells Sequent machines that it can do a parallel make, | |
594 | # and is harmless otherwise. | |
595 | # The miniperl -w -MExporter line is a basic cheap test to catch errors | |
596 | # before make goes on to run preplibrary and then MakeMaker on extensions. | |
597 | # This is very handy because later errors are often caused by miniperl | |
598 | # build problems but that's not obvious to the novice. | |
599 | # The Module used here must not depend on Config or any extensions. | |
600 | ||
601 | !NO!SUBS! | |
602 | ||
603 | ||
604 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
605 | ||
606 | perl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
607 | -@rm -f miniperl.xok | |
608 | $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)dyn$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
609 | $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
610 | ||
611 | # Purify/Quantify Perls. | |
612 | ||
613 | pureperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
614 | $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
615 | ||
616 | purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
617 | $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
618 | ||
619 | quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) | |
620 | $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) | |
621 | ||
622 | # Valgrind perl (currently Linux only) | |
623 | ||
624 | perl.valgrind.config: config.sh | |
625 | @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..." | |
626 | @$(MAKE) perl.config.dashg | |
627 | @echo "Checking usemymalloc='n' in config.sh..." | |
628 | @grep "^usemymalloc=" config.sh | |
629 | @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 | |
630 | @echo "And of course you have to have valgrind..." | |
631 | $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1 | |
632 | ||
633 | # Third Degree Perl (Tru64 only) | |
634 | ||
635 | perl.config.dashg: | |
636 | @echo "Checking optimize='-g' in config.sh..." | |
637 | @grep "^optimize=" config.sh | |
638 | @egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1 | |
639 | ||
640 | perl.third.config: config.sh | |
641 | @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..." | |
642 | @$(MAKE) perl.config.dashg | |
643 | @echo "Checking usemymalloc='n' in config.sh..." | |
644 | @grep "^usemymalloc=" config.sh | |
645 | @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 | |
646 | ||
647 | perl.third: /usr/bin/atom perl.third.config perl | |
648 | atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl | |
649 | @echo "Now you may run perl.third and then study perl.3log." | |
650 | ||
651 | # Pixie Perls (Tru64 and IRIX only) | |
652 | ||
653 | perl.pixie.config: config.sh | |
654 | @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..." | |
655 | @$(MAKE) perl.config.dashg | |
656 | ||
657 | perl.pixie.atom: /usr/bin/atom perl | |
658 | atom -tool pixie -L. -all -toolargs="-quiet" perl | |
659 | ||
660 | perl.pixie.irix: perl | |
661 | pixie perl | |
662 | ||
663 | perl.pixie: /usr/bin/pixie perl.pixie.config perl | |
664 | if test -x /usr/bin/atom; then \ | |
665 | $(MAKE) perl.pixie.atom; \ | |
666 | else \ | |
667 | $(MAKE) perl.pixie.irix; \ | |
668 | fi | |
669 | @echo "Now you may run perl.pixie and then run pixie." | |
670 | ||
671 | # Gprof Perl | |
672 | ||
673 | perl.config.dashpg: | |
674 | @echo "Checking optimize='-pg' in config.sh..." | |
675 | @grep "^optimize=" config.sh | |
676 | @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1 | |
677 | ||
678 | perl.gprof.config: config.sh | |
679 | @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..." | |
680 | @$(MAKE) perl.config.dashpg | |
681 | ||
682 | perl.gprof: /usr/bin/gprof perl.gprof.config | |
683 | @-rm -f perl | |
684 | $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl | |
685 | @echo "Now you may run perl.gprof and then run gprof perl.gprof." | |
686 | ||
687 | # Gcov Perl | |
688 | ||
689 | perl.config.gcov: | |
690 | @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..." | |
691 | @echo "Checking gccversion in config.sh..." | |
692 | @grep "^gccversion=" config.sh | |
693 | @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1 | |
694 | @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..." | |
695 | @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..." | |
696 | @grep "^ccflags=" config.sh | |
697 | @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1 | |
698 | ||
699 | perl.gcov: perl.config.gcov | |
700 | @-rm -f perl | |
701 | $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl | |
702 | @echo "Now you may run perl.gcov and then run gcov some.c." | |
703 | ||
704 | # Microperl. This is just a convenience thing if one happens to | |
705 | # build also the full Perl and therefore the real big Makefile: | |
706 | # usually one should manually explicitly issue the below command. | |
707 | ||
708 | .PHONY: microperl | |
709 | microperl: | |
710 | $(MAKE) -f Makefile.micro | |
711 | ||
8ed6d636 VK |
712 | !NO!SUBS! |
713 | ||
714 | fi | |
715 | ||
716 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
717 | ||
8ed6d636 | 718 | .PHONY: preplibrary |
7353f64c | 719 | preplibrary: miniperl $(CONFIGPM) lib/lib.pm $(PREPLIBRARY_LIBPERL) |
8ed6d636 VK |
720 | |
721 | .PHONY: makeppport | |
722 | makeppport: miniperl$(EXE_EXT) $(CONFIGPM) | |
723 | $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport | |
724 | ||
725 | $(CROSS_LIB)/Config.pod: config.sh miniperl configpm Porting/Glossary | |
608969de VK |
726 | $(LDLIBPTH) ./miniperl -Ilib configpm --cross=$(CROSS_NAME) |
727 | cp *.h $(CROSS_LIB)/ | |
728 | cp ext/re/re.pm $(LIBDIR)/ | |
729 | ||
730 | $(CONFIGPM): $(CROSS_LIB)/Config.pod xconfig.h | |
8ed6d636 VK |
731 | |
732 | lib/re.pm: ext/re/re.pm | |
733 | @-rm -f $@ | |
734 | cp ext/re/re.pm lib/re.pm | |
735 | ||
5e4c4c91 NC |
736 | lib/buildcustomize.pl: $(MINIPERL_EXE) write_buildcustomize.pl |
737 | $(MINIPERL) write_buildcustomize.pl >lib/buildcustomize.pl | |
738 | ||
8ed6d636 VK |
739 | unidatafiles $(unidatafiles): uni.data |
740 | ||
741 | uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables | |
3df51b85 KW |
742 | cd lib/unicore && $(LDLIBPTH) ../../miniperl -I../../lib mktables -P ../../pod -maketest -makelist -p |
743 | # Commented out so always runs, mktables looks at far more files than we | |
744 | # can in this makefile to decide if needs to run or not | |
745 | # touch uni.data | |
8ed6d636 VK |
746 | |
747 | extra.pods: miniperl | |
748 | -@test ! -f extra.pods || rm -f `cat extra.pods` | |
749 | -@rm -f extra.pods | |
750 | -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \ | |
751 | nx=`echo $$x | sed -e "s/README\.//"`; \ | |
752 | cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \ | |
753 | echo "pod/perl"$$nx".pod" >> extra.pods ; \ | |
754 | done | |
755 | -@rm -f pod/perlvms.pod | |
756 | -@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods | |
757 | -@rm -f pod/perldelta.pod | |
4d7c7898 | 758 | -@test -f pod/perl5100delta.pod && cd pod && $(LNS) perl5100delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc |
8ed6d636 VK |
759 | |
760 | extras.make: perl$(EXE_EXT) | |
761 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst` | |
762 | ||
763 | extras.test: perl$(EXE_EXT) | |
764 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst` | |
765 | ||
766 | extras.install: perl$(EXE_EXT) | |
767 | -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst` | |
768 | ||
769 | .PHONY: install install-strip install-all install-verbose install-silent \ | |
770 | no-install install.perl install.man install.html | |
771 | ||
772 | META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm | |
4612967b | 773 | $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta -y |
bfc0a3e7 CBW |
774 | |
775 | META.json: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm | |
4612967b | 776 | $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta -j |
8ed6d636 VK |
777 | |
778 | install-strip: | |
779 | $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)" | |
780 | ||
781 | install install-all: | |
782 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)" | |
783 | ||
784 | install-verbose: | |
785 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)" | |
786 | ||
787 | install-silent: | |
788 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)" | |
789 | ||
790 | no-install: | |
791 | $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)" | |
792 | ||
793 | # Set this to an empty string to avoid an attempt of rebuild before install | |
794 | INSTALL_DEPENDENCE = all | |
795 | ||
796 | install.perl: $(INSTALL_DEPENDENCE) installperl | |
797 | $(LDLIBPTH) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS) | |
798 | -@test ! -s extras.lst || $(MAKE) extras.install | |
799 | ||
800 | install.man: all installman | |
801 | $(LDLIBPTH) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS) | |
802 | ||
803 | # XXX Experimental. Hardwired values, but useful for testing. | |
804 | # Eventually Configure could ask for some of these values. | |
805 | install.html: all installhtml | |
806 | -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd .. | |
807 | $(LDLIBPTH) ./perl installhtml \ | |
808 | --podroot=. --podpath=. --recurse \ | |
809 | --htmldir=$(privlib)/html \ | |
810 | --htmlroot=$(privlib)/html \ | |
811 | --splithead=pod/perlipc \ | |
812 | --splititem=pod/perlfunc \ | |
e2b41a3f | 813 | --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \ |
8ed6d636 VK |
814 | --verbose |
815 | ||
816 | ||
817 | # I now supply perly.c with the kits, so the following section is | |
818 | # used only if you force bison to run by saying | |
819 | # make regen_perly | |
820 | # You normally shouldn't remake perly.[ch]. | |
821 | ||
822 | .PHONY: regen_perly | |
823 | ||
824 | run_byacc: | |
825 | @echo "run_byacc is obsolete; try 'make regen_perly' instead" | |
826 | ||
827 | # this outputs perly.h, perly.act and perly.tab | |
828 | regen_perly: | |
829 | perl regen_perly.pl | |
830 | ||
831 | # We don't want to regenerate perly.c and perly.h, but they might | |
832 | # appear out-of-date after a patch is applied or a new distribution is | |
833 | # made. | |
834 | perly.c: perly.y | |
835 | -@sh -c true | |
836 | ||
837 | perly.h: perly.y | |
838 | -@sh -c true | |
839 | ||
d500e60d | 840 | SYM = globvar.sym perlio.sym |
8ed6d636 VK |
841 | |
842 | SYMH = perlvars.h intrpvar.h | |
843 | ||
844 | CHMOD_W = chmod +w | |
845 | ||
846 | # The following files are generated automatically | |
d500e60d | 847 | # embed.pl: proto.h embed.h embedvar.h perlapi.h perlapi.c |
897d3989 | 848 | # opcode.pl: opcode.h opnames.h pp_proto.h |
8ed6d636 VK |
849 | # regcomp.pl: regnodes.h |
850 | # warnings.pl: warnings.h lib/warnings.pm | |
f2c01b15 | 851 | # feature.pl: feature.h lib/feature.pl |
8ed6d636 VK |
852 | # The correct versions should be already supplied with the perl kit, |
853 | # in case you don't have perl available. | |
854 | # To force them to be regenerated, run | |
855 | # perl regen.pl | |
856 | # with your existing copy of perl | |
857 | # (make regen_headers is kept for backwards compatibility) | |
858 | ||
d500e60d | 859 | AUTOGEN_FILES = opcode.h opnames.h pp_proto.h proto.h embed.h embedvar.h \ |
69bcf1d3 | 860 | perlapi.h perlapi.c regnodes.h warnings.h lib/warnings.pm \ |
f2c01b15 | 861 | lib/feature.pm feature.h |
8ed6d636 | 862 | |
1e2f36ef | 863 | .PHONY: regen_headers regen_all |
8ed6d636 VK |
864 | |
865 | regen regen_headers: FORCE | |
866 | -perl regen.pl | |
867 | ||
1e2f36ef | 868 | regen_all: regen |
8ed6d636 VK |
869 | |
870 | .PHONY: manisort manicheck | |
871 | ||
872 | manisort: FORCE | |
873 | LC_ALL=C sort -fdc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \ | |
874 | LC_ALL=C sort -fdo MANIFEST MANIFEST) | |
875 | ||
876 | manicheck: FORCE | |
877 | perl Porting/manicheck | |
878 | ||
879 | # Extensions: | |
880 | # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will | |
881 | # automatically get built. There should ordinarily be no need to change | |
882 | # any of this part of makefile. | |
883 | # | |
884 | # The dummy dependency is a place holder in case $(dynamic_ext) or | |
885 | # $(static_ext) is empty. | |
886 | # | |
887 | # DynaLoader may be needed for extensions that use Makefile.PL. | |
888 | ||
889 | ###$(DYNALOADER).c: $(EXTDIR)/DynaLoader/dl_dld.xs $(CONFIGPM) | |
890 | ### if not exist $(AUTODIR) mkdir $(AUTODIR) | |
891 | ### cd $(EXTDIR)\$(*B) | |
892 | ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) $(*B)_pm.PL | |
893 | ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) XSLoader_pm.PL | |
894 | ### cd ..\..\win32 | |
895 | ### $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) | |
896 | ### $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) | |
897 | ### cd $(EXTDIR)\$(*B) | |
898 | ### $(XSUBPP) dl_win32.xs > $(*B).c | |
899 | ### cd ..\..\win32 | |
900 | ### | |
901 | ###$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs | |
902 | ### $(COPY) dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs | |
903 | ||
904 | ||
905 | ||
5e4c4c91 | 906 | $(DYNALOADER): lib/buildcustomize.pl preplibrary FORCE |
3b333d01 | 907 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS) |
8ed6d636 | 908 | |
5e4c4c91 | 909 | d_dummy $(dynamic_ext): miniperl$(EXE_EXT) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE |
3b333d01 | 910 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic |
8ed6d636 | 911 | |
5e4c4c91 | 912 | s_dummy $(static_ext): miniperl$(EXE_EXT) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE |
3b333d01 | 913 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS) |
8ed6d636 | 914 | |
5e4c4c91 | 915 | n_dummy $(nonxs_ext): miniperl$(EXE_EXT) lib/buildcustomize.pl preplibrary $(DYNALOADER) FORCE |
3b333d01 | 916 | @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
8ed6d636 VK |
917 | !NO!SUBS! |
918 | ||
919 | $spitshell >>$Makefile <<EOF | |
920 | $extra_dep | |
921 | EOF | |
922 | ||
923 | $spitshell >>$Makefile <<'!NO!SUBS!' | |
924 | ||
925 | .PHONY: printconfig | |
926 | printconfig: | |
927 | @eval `$(LDLIBPTH) ./perl -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR) | |
928 | ||
929 | .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \ | |
930 | realclean _realcleaner clobber _clobber \ | |
6e2cec71 | 931 | distclean veryclean _verycleaner |
8ed6d636 | 932 | |
6e2cec71 | 933 | clean: _tidy _mopup |
8ed6d636 | 934 | |
6e2cec71 | 935 | realclean: _realcleaner _mopup |
8ed6d636 VK |
936 | @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh" |
937 | ||
938 | _clobber: | |
939 | -@rm -f Cross/run-* Cross/to-* Cross/from-* | |
940 | rm -f config.sh cppstdin Policy.sh extras.lst | |
941 | ||
6e2cec71 | 942 | clobber: _realcleaner _mopup _clobber |
8ed6d636 VK |
943 | |
944 | distclean: clobber | |
945 | ||
946 | # Like distclean but also removes emacs backups and *.orig. | |
947 | veryclean: _verycleaner _mopup _clobber | |
948 | -@rm -f Obsolete Wanted | |
949 | ||
950 | # Do not 'make _mopup' directly. | |
951 | _mopup: | |
952 | rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c uudmap.h generate_uudmap$(EXE_EXT) | |
953 | -rmdir .depending | |
954 | -@test -f extra.pods && rm -f `cat extra.pods` | |
955 | -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod | |
956 | -rm -f perl.exp ext.libs extra.pods uni.data opmini.o | |
957 | -rm -f perl.export perl.dll perl.libexp perl.map perl.def | |
8ed6d636 VK |
958 | -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log |
959 | -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs | |
960 | -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok | |
ce0286c6 | 961 | -rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump |
cc69b689 | 962 | -rm -f perl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl |
8ed6d636 VK |
963 | -rm -f config.over |
964 | ||
965 | # Do not 'make _tidy' directly. | |
966 | _tidy: | |
967 | -cd pod; $(LDLIBPTH) $(MAKE) clean | |
968 | -cd utils; $(LDLIBPTH) $(MAKE) clean | |
8ed6d636 | 969 | -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ |
3b333d01 | 970 | $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \ |
8ed6d636 VK |
971 | done |
972 | ||
973 | _cleaner1: | |
974 | -cd os2; rm -f Makefile | |
975 | -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN) | |
976 | -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN) | |
3b333d01 NC |
977 | -@if test -f miniperl$(EXE_EXT) ; then \ |
978 | for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ | |
979 | $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \ | |
980 | done ; \ | |
981 | else \ | |
982 | sh $(CLEAN).sh ; \ | |
983 | fi | |
984 | rm -f realclean.sh veryclean.sh | |
8ed6d636 VK |
985 | -@test ! -f ./miniperl$(EXE_EXT) || $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport --clean |
986 | ||
987 | # Some systems do not support "?", so keep these files separate. | |
988 | _cleaner2: | |
989 | -rm -f core.*perl.*.? t/core.perl.*.? .?*.c | |
990 | rm -f core *perl.core t/core t/*perl.core core.* t/core.* | |
f18bc4a8 NC |
991 | rm -f t/perl$(EXE_EXT) t/rantests |
992 | rm -rf t/tmp* | |
8ed6d636 VK |
993 | rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR) |
994 | rm -rf $(addedbyconf) | |
995 | rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old | |
996 | rm -f $(private) | |
997 | rm -rf $(unidatafiles) $(unidatadirs) | |
998 | rm -rf lib/auto | |
999 | rm -f lib/.exists lib/*/.exists lib/*/*/.exists | |
1000 | rm -f h2ph.man pstruct | |
1001 | rm -rf .config | |
1002 | rm -f preload | |
1003 | rm -rf lib/Encode lib/Compress lib/Hash lib/re | |
1004 | rm -rf lib/IO/Compress lib/IO/Uncompress | |
1005 | rm -f lib/ExtUtils/ParseXS/t/XSTest.c | |
1006 | rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT) | |
1007 | rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX) | |
1008 | -rmdir lib/B lib/Data | |
1009 | -rmdir lib/Filter/Util lib/IO/Socket | |
1010 | -rmdir lib/List lib/MIME lib/Scalar lib/Sys | |
1011 | -rmdir lib/threads lib/XS | |
1012 | ||
1013 | _realcleaner: | |
1014 | @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean | |
1015 | @$(LDLIBPTH) $(MAKE) _cleaner2 | |
1016 | ||
1017 | _verycleaner: | |
1018 | @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean | |
1019 | @$(LDLIBPTH) $(MAKE) _cleaner2 | |
1020 | -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig | |
1021 | ||
1022 | .PHONY: lint | |
1023 | lint: $(c) | |
1024 | rm -f *.ln | |
1025 | lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c) | |
1026 | ||
1027 | .PHONY: splint | |
1028 | splint: $(c) | |
1029 | splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles) | |
1030 | ||
1031 | # Need to unset during recursion to go out of loop. | |
1032 | # The README below ensures that the dependency list is never empty and | |
1033 | # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding. | |
1034 | ||
1035 | MAKEDEPEND = Makefile makedepend | |
1036 | ||
1037 | $(FIRSTMAKEFILE): README $(MAKEDEPEND) | |
1038 | $(MAKE) depend MAKEDEPEND= | |
1039 | ||
1040 | config.h: config_h.SH config.sh | |
1041 | $(SHELL) config_h.SH | |
1042 | # TODO - improve following line | |
1043 | cp config.h $(CROSS_LIB)/ | |
1044 | ||
1045 | xconfig.h: config_h.SH Cross/config-$(CROSS_NAME).sh | |
1046 | CONFIG_SH=Cross/config-$(CROSS_NAME).sh CONFIG_H=xconfig.h $(SHELL) config_h.SH | |
608969de | 1047 | #TODO $(LDLIBPTH) ./miniperl -Ilib -MCross=$(CROSS_NAME) config_h.PL "INST_VER=$(INST_VER)" "CORE_DIR=$(CROSS_LIB)" "CONFIG_H=xconfig.h" |
8ed6d636 | 1048 | cp xconfig.h $(CROSS_LIB)/ |
608969de | 1049 | cp xconfig.h $(CROSS_LIB)/config.h |
8ed6d636 VK |
1050 | |
1051 | # When done, touch perlmain.c so that it doesn't get remade each time. | |
1052 | .PHONY: depend | |
1053 | depend: makedepend | |
1054 | sh ./makedepend MAKE=$(MAKE) | |
1055 | - test -s perlmain.c && touch perlmain.c | |
8ed6d636 VK |
1056 | |
1057 | # Cannot postpone this until $firstmakefile is ready ;-) | |
1058 | makedepend: makedepend.SH config.sh | |
1059 | sh ./makedepend.SH | |
1060 | ||
1061 | .PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \ | |
1062 | test_tty test-tty _test_tty test_notty test-notty _test_notty \ | |
1063 | utest ucheck test.utf8 check.utf8 test.torture torturetest \ | |
1064 | test.utf16 check.utf16 utest.utf16 ucheck.utf16 \ | |
1065 | test.third check.third utest.third ucheck.third test_notty.third \ | |
1066 | test.deparse test_notty.deparse test_harness test_harness_notty \ | |
1067 | minitest coretest test.taintwarn | |
1068 | ||
1069 | # Cannot delegate rebuilding of t/perl to make | |
1070 | # to allow interlaced test and minitest | |
1071 | ||
1072 | TESTFILE=TEST | |
1073 | ||
6e2cec71 | 1074 | _test_prep: |
8ed6d636 VK |
1075 | cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT)) |
1076 | ||
1077 | # Architecture-neutral stuff: | |
1078 | ||
1079 | test_prep_pre: preplibrary utilities $(nonxs_ext) | |
1080 | ||
9f417383 | 1081 | test_prep: test_prep_pre miniperl$(EXE_EXT) $(unidatafiles) perl$(EXE_EXT) \ |
c67aee7a | 1082 | $(dynamic_ext) $(TEST_PERL_DLL) |
8ed6d636 VK |
1083 | PERL=./perl $(MAKE) _test_prep |
1084 | ||
1085 | _test_tty: | |
1086 | cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty | |
1087 | ||
1088 | _test_notty: | |
1089 | cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) | |
1090 | ||
8ed6d636 VK |
1091 | # The second branch is for testing without a tty or controlling terminal, |
1092 | # see t/op/stat.t | |
1093 | _test: | |
1094 | if (true </dev/tty) >/dev/null 2>&1; then \ | |
1095 | $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_tty ; \ | |
1096 | else \ | |
1097 | $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_notty ; \ | |
1098 | fi | |
1099 | @echo "Ran tests" > t/rantests | |
1100 | ||
1101 | test check: test_prep | |
1102 | PERL=./perl $(MAKE) _test | |
1103 | ||
1104 | test_tty: test_prep | |
1105 | PERL=./perl $(MAKE) _test_tty | |
1106 | ||
1107 | test_notty: test_prep | |
1108 | PERL=./perl $(MAKE) _test_notty | |
1109 | ||
1110 | utest ucheck test.utf8 check.utf8: test_prep | |
1111 | PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test | |
1112 | ||
1113 | coretest: test_prep | |
1114 | PERL=./perl TEST_ARGS=-core $(MAKE) _test | |
1115 | ||
1116 | test-prep: test_prep | |
1117 | ||
1118 | test-tty: test_tty | |
1119 | ||
1120 | test-notty: test_notty | |
1121 | ||
1122 | # Torture testing | |
1123 | ||
1124 | test.torture torturetest: test_prep | |
1125 | PERL=./perl TEST_ARGS=-torture $(MAKE) _test | |
1126 | ||
1127 | # Targets for UTF16 testing: | |
1128 | ||
1129 | minitest.utf16: minitest.prep | |
1130 | - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ | |
115e9681 | 1131 | && $(LDLIBPTH) ./perl TEST -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty |
8ed6d636 VK |
1132 | |
1133 | test.utf16 check.utf16: test_prep | |
1134 | PERL=./perl $(MAKE) TEST_ARGS=-utf16 _test | |
1135 | ||
1136 | utest.utf16 ucheck.utf16: test_prep | |
1137 | PERL=./perl $(MAKE) TEST_ARGS="-utf8 -utf16" _test | |
1138 | ||
1139 | # Targets for valgrind testing: | |
1140 | ||
1141 | test_prep.valgrind: test_prep perl.valgrind | |
1142 | PERL=./perl $(MAKE) _test_prep | |
1143 | ||
1144 | test.valgrind check.valgrind: test_prep perl.valgrind.config | |
1145 | PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(MAKE) _test | |
1146 | ||
1147 | utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config | |
1148 | PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test | |
1149 | ||
1150 | test_notty.valgrind: test_prep.valgrind perl.valgrind.config | |
1151 | PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty | |
1152 | ||
1153 | # Targets for Third Degree testing. | |
1154 | ||
1155 | test_prep.third: test_prep perl.third | |
1156 | PERL=./perl.third $(MAKE) _test_prep | |
1157 | ||
1158 | test.third check.third: test_prep.third perl.third | |
1159 | PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 $(MAKE) _test | |
1160 | ||
1161 | utest.third ucheck.third: test_prep.third perl.third | |
1162 | PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 TEST_ARGS=-utf8 $(MAKE) _test | |
1163 | ||
1164 | test_notty.third: test_prep.third perl.third | |
1165 | PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty | |
1166 | ||
1167 | # Targets for Deparse testing. | |
1168 | ||
1169 | test.deparse: test_prep | |
1170 | PERL=./perl TEST_ARGS=-deparse $(MAKE) _test | |
1171 | ||
1172 | test_notty.deparse: test_prep | |
1173 | PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty | |
1174 | ||
1175 | # Targets to run the test suite with -t | |
1176 | ||
1177 | test.taintwarn: test_prep | |
1178 | PERL=./perl TEST_ARGS=-taintwarn $(MAKE) _test | |
1179 | ||
1180 | minitest.prep: | |
1181 | -@test -f lib/lib.pm && test -f lib/Config.pm || \ | |
1182 | $(MAKE) lib/Config.pm lib/lib.pm $(unidatafiles) | |
1183 | @echo " " | |
1184 | @echo "You may see some irrelevant test failures if you have been unable" | |
1185 | @echo "to build lib/Config.pm, lib/lib.pm or the Unicode data files." | |
1186 | @echo " " | |
1187 | ||
1188 | # Can't depend on lib/Config.pm because that might be where miniperl | |
1189 | # is crashing. | |
7353f64c | 1190 | minitest: miniperl$(EXE_EXT) minitest.prep |
8ed6d636 | 1191 | - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ |
115e9681 | 1192 | && $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty |
8ed6d636 VK |
1193 | |
1194 | # Test via harness | |
1195 | ||
1196 | test_harness: test_prep | |
1197 | PERL=./perl $(MAKE) TESTFILE=harness _test | |
1198 | ||
1199 | test_harness_notty: test_prep | |
1200 | PERL=./perl HARNESS_NOTTY=1 $(MAKE) TESTFILE=harness _test | |
1201 | ||
1202 | # Handy way to run perlbug -ok without having to install and run the | |
1203 | # installed perlbug. We don't re-run the tests here - we trust the user. | |
1204 | # Please *don't* use this unless all tests pass. | |
1205 | # If you want to report test failures, use "make nok" instead. | |
1206 | ||
1207 | .PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack | |
1208 | ||
1209 | ok: utilities | |
1210 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' | |
1211 | ||
1212 | okfile: utilities | |
1213 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok | |
1214 | ||
1215 | oknack: utilities | |
1216 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A | |
1217 | ||
1218 | okfilenack: utilities | |
1219 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A | |
1220 | ||
1221 | nok: utilities | |
1222 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' | |
1223 | ||
1224 | nokfile: utilities | |
1225 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok | |
1226 | ||
1227 | noknack: utilities | |
1228 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A | |
1229 | ||
1230 | nokfilenack: utilities | |
1231 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A | |
1232 | ||
467132b9 | 1233 | .PHONY: clist hlist shlist |
8ed6d636 VK |
1234 | |
1235 | clist: $(c) | |
1236 | echo $(c) | tr ' ' $(TRNL) >.clist | |
1237 | ||
1238 | hlist: $(h) | |
1239 | echo $(h) | tr ' ' $(TRNL) >.hlist | |
1240 | ||
1241 | shlist: $(sh) | |
1242 | echo $(sh) | tr ' ' $(TRNL) >.shlist | |
1243 | ||
8ed6d636 VK |
1244 | Makefile: Makefile.SH ./config.sh |
1245 | $(SHELL) Makefile.SH | |
1246 | ||
1247 | .PHONY: distcheck | |
1248 | distcheck: FORCE | |
1249 | perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()' | |
1250 | ||
1251 | .PHONY: elc | |
1252 | elc: emacs/cperl-mode.elc | |
1253 | ||
1254 | emacs/cperl-mode.elc: emacs/cperl-mode.el | |
1255 | -cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el | |
1256 | ||
1257 | .PHONY: etags ctags tags | |
1258 | ||
1259 | etags: TAGS | |
1260 | ||
1261 | TAGS: emacs/cperl-mode.elc | |
1262 | sh emacs/ptags | |
1263 | ||
8534470b | 1264 | # Let's hope make will not go into an infinite loop on case-insensitive systems |
8ed6d636 VK |
1265 | # This may also fail if . is in the head of the path, since perl will |
1266 | # require -Ilib | |
1267 | tags: TAGS | |
1268 | perl emacs/e2ctags.pl TAGS > tags | |
1269 | ||
1270 | ctags: | |
1271 | ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c *.c *.h | |
1272 | ||
1273 | # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE | |
1274 | # If this runs make out of memory, delete /usr/include lines. | |
1275 | !NO!SUBS! | |
1276 | ||
1277 | $eunicefix $Makefile | |
8ed6d636 VK |
1278 | $rm -f $firstmakefile |
1279 | ||
1280 | # Now do any special processing required before building. | |
1281 | ||
1282 | case "$ebcdic" in | |
1283 | define) | |
1284 | xxx='' | |
1285 | echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2 | |
1286 | case "$osname" in | |
1287 | os390|posix-bc) | |
8ed6d636 | 1288 | ;; |
8ed6d636 VK |
1289 | *) |
1290 | echo "'$osname' is an EBCDIC system I don't know that well." >&4 | |
1291 | ;; | |
1292 | esac | |
1293 | case "$xxx" in | |
1294 | '') echo "No parser files were regenerated. That's okay." >&2 ;; | |
1295 | esac | |
1296 | ;; | |
1297 | esac | |
1298 | ||
1299 | # ex: set ts=8 sts=4 sw=4 noet: |