Commit | Line | Data |
---|---|---|
a0d0e21e LW |
1 | =head1 NAME |
2 | ||
3 | perlvar - Perl predefined variables | |
4 | ||
5 | =head1 DESCRIPTION | |
6 | ||
b0c22438 | 7 | =head2 The Syntax of Variable Names |
8 | ||
241a59d9 | 9 | Variable names in Perl can have several formats. Usually, they |
b0c22438 | 10 | must begin with a letter or underscore, in which case they can be |
11 | arbitrarily long (up to an internal limit of 251 characters) and | |
12 | may contain letters, digits, underscores, or the special sequence | |
241a59d9 | 13 | C<::> or C<'>. In this case, the part before the last C<::> or |
b0c22438 | 14 | C<'> is taken to be a I<package qualifier>; see L<perlmod>. |
15 | ||
16 | Perl variable names may also be a sequence of digits or a single | |
241a59d9 | 17 | punctuation or control character. These names are all reserved for |
b0c22438 | 18 | special uses by Perl; for example, the all-digits names are used |
19 | to hold data captured by backreferences after a regular expression | |
241a59d9 | 20 | match. Perl has a special syntax for the single-control-character |
b0c22438 | 21 | names: It understands C<^X> (caret C<X>) to mean the control-C<X> |
241a59d9 | 22 | character. For example, the notation C<$^W> (dollar-sign caret |
b0c22438 | 23 | C<W>) is the scalar variable whose name is the single character |
241a59d9 | 24 | control-C<W>. This is better than typing a literal control-C<W> |
b0c22438 | 25 | into your program. |
26 | ||
60cf4914 | 27 | Since Perl v5.6.0, Perl variable names may be alphanumeric |
b0c22438 | 28 | strings that begin with control characters (or better yet, a caret). |
29 | These variables must be written in the form C<${^Foo}>; the braces | |
241a59d9 FC |
30 | are not optional. C<${^Foo}> denotes the scalar variable whose |
31 | name is a control-C<F> followed by two C<o>'s. These variables are | |
b0c22438 | 32 | reserved for future special uses by Perl, except for the ones that |
241a59d9 | 33 | begin with C<^_> (control-underscore or caret-underscore). No |
b0c22438 | 34 | control-character name that begins with C<^_> will acquire a special |
35 | meaning in any future version of Perl; such names may therefore be | |
241a59d9 | 36 | used safely in programs. C<$^_> itself, however, I<is> reserved. |
b0c22438 | 37 | |
38 | Perl identifiers that begin with digits, control characters, or | |
39 | punctuation characters are exempt from the effects of the C<package> | |
40 | declaration and are always forced to be in package C<main>; they are | |
241a59d9 | 41 | also exempt from C<strict 'vars'> errors. A few other names are also |
b0c22438 | 42 | exempt in these ways: |
43 | ||
9548c15c FC |
44 | ENV STDIN |
45 | INC STDOUT | |
46 | ARGV STDERR | |
47 | ARGVOUT | |
48 | SIG | |
b0c22438 | 49 | |
69520822 | 50 | In particular, the special C<${^_XYZ}> variables are always taken |
b0c22438 | 51 | to be in package C<main>, regardless of any C<package> declarations |
52 | presently in scope. | |
53 | ||
54 | =head1 SPECIAL VARIABLES | |
a0d0e21e | 55 | |
241a59d9 | 56 | The following names have special meaning to Perl. Most punctuation |
0b9346e6 | 57 | names have reasonable mnemonics, or analogs in the shells. |
58 | Nevertheless, if you wish to use long variable names, you need only say: | |
a0d0e21e | 59 | |
9548c15c | 60 | use English; |
a0d0e21e | 61 | |
241a59d9 FC |
62 | at the top of your program. This aliases all the short names to the long |
63 | names in the current package. Some even have medium names, generally | |
64 | borrowed from B<awk>. To avoid a performance hit, if you don't need the | |
84dabc03 | 65 | C<$PREMATCH>, C<$MATCH>, or C<$POSTMATCH> it's best to use the C<English> |
66 | module without them: | |
a0d0e21e | 67 | |
9548c15c | 68 | use English '-no_match_vars'; |
a1ce9542 | 69 | |
241a59d9 | 70 | Before you continue, note the sort order for variables. In general, we |
0b9346e6 | 71 | first list the variables in case-insensitive, almost-lexigraphical |
72 | order (ignoring the C<{> or C<^> preceding words, as in C<${^UNICODE}> | |
73 | or C<$^T>), although C<$_> and C<@_> move up to the top of the pile. | |
74 | For variables with the same identifier, we list it in order of scalar, | |
75 | array, hash, and bareword. | |
a1ce9542 | 76 | |
b0c22438 | 77 | =head2 General Variables |
a0d0e21e | 78 | |
84dabc03 | 79 | =over 8 |
80 | ||
a0d0e21e LW |
81 | =item $ARG |
82 | ||
83 | =item $_ | |
a054c801 | 84 | X<$_> X<$ARG> |
a0d0e21e | 85 | |
241a59d9 | 86 | The default input and pattern-searching space. The following pairs are |
a0d0e21e LW |
87 | equivalent: |
88 | ||
9548c15c FC |
89 | while (<>) {...} # equivalent only in while! |
90 | while (defined($_ = <>)) {...} | |
a0d0e21e | 91 | |
9548c15c FC |
92 | /^Subject:/ |
93 | $_ =~ /^Subject:/ | |
a0d0e21e | 94 | |
9548c15c FC |
95 | tr/a-z/A-Z/ |
96 | $_ =~ tr/a-z/A-Z/ | |
a0d0e21e | 97 | |
9548c15c FC |
98 | chomp |
99 | chomp($_) | |
a0d0e21e | 100 | |
0b9346e6 | 101 | Here are the places where Perl will assume C<$_> even if you don't use it: |
cb1a09d0 AD |
102 | |
103 | =over 3 | |
104 | ||
105 | =item * | |
106 | ||
84dabc03 | 107 | The following functions use C<$_> as a default argument: |
db1511c8 | 108 | |
f61f53cc | 109 | abs, alarm, chomp, chop, chr, chroot, |
ae815a4d FC |
110 | cos, defined, eval, evalbytes, exp, fc, glob, hex, int, lc, |
111 | lcfirst, length, log, lstat, mkdir, oct, ord, pos, print, printf, | |
b0169937 | 112 | quotemeta, readlink, readpipe, ref, require, reverse (in scalar context only), |
ae815a4d FC |
113 | rmdir, say, sin, split (for its second |
114 | argument), sqrt, stat, study, uc, ucfirst, | |
b0169937 | 115 | unlink, unpack. |
cb1a09d0 AD |
116 | |
117 | =item * | |
118 | ||
db1511c8 GS |
119 | All file tests (C<-f>, C<-d>) except for C<-t>, which defaults to STDIN. |
120 | See L<perlfunc/-X> | |
121 | ||
cb1a09d0 AD |
122 | =item * |
123 | ||
b0169937 GS |
124 | The pattern matching operations C<m//>, C<s///> and C<tr///> (aka C<y///>) |
125 | when used without an C<=~> operator. | |
cb1a09d0 | 126 | |
54310121 | 127 | =item * |
cb1a09d0 AD |
128 | |
129 | The default iterator variable in a C<foreach> loop if no other | |
130 | variable is supplied. | |
131 | ||
54310121 | 132 | =item * |
cb1a09d0 | 133 | |
b0c22438 | 134 | The implicit iterator variable in the C<grep()> and C<map()> functions. |
cb1a09d0 | 135 | |
54310121 | 136 | =item * |
cb1a09d0 | 137 | |
b0c22438 | 138 | The implicit variable of C<given()>. |
db1511c8 GS |
139 | |
140 | =item * | |
141 | ||
ae815a4d FC |
142 | The default place to put the next value or input record |
143 | when a C<< <FH> >>, C<readline>, C<readdir> or C<each> | |
cb1a09d0 | 144 | operation's result is tested by itself as the sole criterion of a C<while> |
241a59d9 | 145 | test. Outside a C<while> test, this will not happen. |
cb1a09d0 AD |
146 | |
147 | =back | |
148 | ||
fc33dad2 FC |
149 | C<$_> is by default a global variable. However, as |
150 | of perl v5.10.0, you can use a lexical version of | |
241a59d9 | 151 | C<$_> by declaring it in a file or in a block with C<my>. Moreover, |
fc33dad2 FC |
152 | declaring C<our $_> restores the global C<$_> in the current scope. Though |
153 | this seemed like a good idea at the time it was introduced, lexical C<$_> | |
154 | actually causes more problems than it solves. If you call a function that | |
155 | expects to be passed information via C<$_>, it may or may not work, | |
156 | depending on how the function is written, there not being any easy way to | |
157 | solve this. Just avoid lexical C<$_>, unless you are feeling particularly | |
158 | masochistic. | |
59f00321 | 159 | |
b0c22438 | 160 | Mnemonic: underline is understood in certain operations. |
a0d0e21e | 161 | |
0b9346e6 | 162 | =item @ARG |
cde0cee5 | 163 | |
0b9346e6 | 164 | =item @_ |
165 | X<@_> X<@ARG> | |
a0d0e21e | 166 | |
0b9346e6 | 167 | Within a subroutine the array C<@_> contains the parameters passed to |
241a59d9 | 168 | that subroutine. Inside a subroutine, C<@_> is the default array for |
0b9346e6 | 169 | the array operators C<push>, C<pop>, C<shift>, and C<unshift>. |
a0d0e21e | 170 | |
0b9346e6 | 171 | See L<perlsub>. |
a0d0e21e | 172 | |
1311257d | 173 | =item $LIST_SEPARATOR |
174 | ||
175 | =item $" | |
176 | X<$"> X<$LIST_SEPARATOR> | |
177 | ||
69520822 | 178 | When an array or an array slice is interpolated into a double-quoted |
179 | string or a similar context such as C</.../>, its elements are | |
241a59d9 | 180 | separated by this value. Default is a space. For example, this: |
69520822 | 181 | |
9548c15c | 182 | print "The array is: @array\n"; |
69520822 | 183 | |
184 | is equivalent to this: | |
185 | ||
9548c15c | 186 | print "The array is: " . join($", @array) . "\n"; |
69520822 | 187 | |
188 | Mnemonic: works in double-quoted context. | |
1311257d | 189 | |
b0c22438 | 190 | =item $PROCESS_ID |
cde0cee5 | 191 | |
b0c22438 | 192 | =item $PID |
a0d0e21e | 193 | |
b0c22438 | 194 | =item $$ |
195 | X<$$> X<$PID> X<$PROCESS_ID> | |
a0d0e21e | 196 | |
241a59d9 | 197 | The process number of the Perl running this script. Though you I<can> set |
4a904372 | 198 | this variable, doing so is generally discouraged, although it can be |
241a59d9 | 199 | invaluable for some testing purposes. It will be reset automatically |
b0c22438 | 200 | across C<fork()> calls. |
a0d0e21e | 201 | |
d7c042c9 AB |
202 | Note for Linux and Debian GNU/kFreeBSD users: Before Perl v5.16.0 perl |
203 | would emulate POSIX semantics on Linux systems using LinuxThreads, a | |
204 | partial implementation of POSIX Threads that has since been superseded | |
205 | by the Native POSIX Thread Library (NPTL). | |
206 | ||
e3f68f70 | 207 | LinuxThreads is now obsolete on Linux, and caching C<getpid()> |
d7c042c9 AB |
208 | like this made embedding perl unnecessarily complex (since you'd have |
209 | to manually update the value of $$), so now C<$$> and C<getppid()> | |
210 | will always return the same values as the underlying C library. | |
211 | ||
212 | Debian GNU/kFreeBSD systems also used LinuxThreads up until and | |
213 | including the 6.0 release, but after that moved to FreeBSD thread | |
214 | semantics, which are POSIX-like. | |
215 | ||
216 | To see if your system is affected by this discrepancy check if | |
217 | C<getconf GNU_LIBPTHREAD_VERSION | grep -q NPTL> returns a false | |
218 | value. NTPL threads preserve the POSIX semantics. | |
a0d0e21e | 219 | |
b0c22438 | 220 | Mnemonic: same as shells. |
ad83b128 | 221 | |
66d7055b DR |
222 | =item $PROGRAM_NAME |
223 | ||
224 | =item $0 | |
225 | X<$0> X<$PROGRAM_NAME> | |
226 | ||
227 | Contains the name of the program being executed. | |
228 | ||
229 | On some (but not all) operating systems assigning to C<$0> modifies | |
241a59d9 | 230 | the argument area that the C<ps> program sees. On some platforms you |
66d7055b | 231 | may have to use special C<ps> options or a different C<ps> to see the |
241a59d9 | 232 | changes. Modifying the C<$0> is more useful as a way of indicating the |
66d7055b DR |
233 | current program state than it is for hiding the program you're |
234 | running. | |
235 | ||
236 | Note that there are platform-specific limitations on the maximum | |
241a59d9 | 237 | length of C<$0>. In the most extreme case it may be limited to the |
66d7055b DR |
238 | space occupied by the original C<$0>. |
239 | ||
240 | In some platforms there may be arbitrary amount of padding, for | |
241 | example space characters, after the modified name as shown by C<ps>. | |
242 | In some platforms this padding may extend all the way to the original | |
243 | length of the argument area, no matter what you do (this is the case | |
244 | for example with Linux 2.2). | |
245 | ||
246 | Note for BSD users: setting C<$0> does not completely remove "perl" | |
241a59d9 | 247 | from the ps(1) output. For example, setting C<$0> to C<"foobar"> may |
66d7055b DR |
248 | result in C<"perl: foobar (perl)"> (whether both the C<"perl: "> prefix |
249 | and the " (perl)" suffix are shown depends on your exact BSD variant | |
241a59d9 | 250 | and version). This is an operating system feature, Perl cannot help it. |
66d7055b DR |
251 | |
252 | In multithreaded scripts Perl coordinates the threads so that any | |
253 | thread may modify its copy of the C<$0> and the change becomes visible | |
241a59d9 | 254 | to ps(1) (assuming the operating system plays along). Note that |
66d7055b DR |
255 | the view of C<$0> the other threads have will not change since they |
256 | have their own copies of it. | |
257 | ||
258 | If the program has been given to perl via the switches C<-e> or C<-E>, | |
259 | C<$0> will contain the string C<"-e">. | |
260 | ||
60cf4914 | 261 | On Linux as of perl v5.14.0 the legacy process name will be set with |
66d7055b | 262 | C<prctl(2)>, in addition to altering the POSIX name via C<argv[0]> as |
241a59d9 | 263 | perl has done since version 4.000. Now system utilities that read the |
66d7055b | 264 | legacy process name such as ps, top and killall will recognize the |
241a59d9 | 265 | name you set when assigning to C<$0>. The string you supply will be |
66d7055b DR |
266 | cut off at 16 bytes, this is a limitation imposed by Linux. |
267 | ||
268 | Mnemonic: same as B<sh> and B<ksh>. | |
269 | ||
b0c22438 | 270 | =item $REAL_GROUP_ID |
a01268b5 | 271 | |
b0c22438 | 272 | =item $GID |
a01268b5 | 273 | |
b0c22438 | 274 | =item $( |
275 | X<$(> X<$GID> X<$REAL_GROUP_ID> | |
a01268b5 | 276 | |
241a59d9 | 277 | The real gid of this process. If you are on a machine that supports |
b0c22438 | 278 | membership in multiple groups simultaneously, gives a space separated |
241a59d9 | 279 | list of groups you are in. The first number is the one returned by |
b0c22438 | 280 | C<getgid()>, and the subsequent ones by C<getgroups()>, one of which may be |
281 | the same as the first number. | |
a01268b5 | 282 | |
b0c22438 | 283 | However, a value assigned to C<$(> must be a single number used to |
241a59d9 FC |
284 | set the real gid. So the value given by C<$(> should I<not> be assigned |
285 | back to C<$(> without being forced numeric, such as by adding zero. Note | |
b0c22438 | 286 | that this is different to the effective gid (C<$)>) which does take a |
287 | list. | |
fe307981 | 288 | |
b0c22438 | 289 | You can change both the real gid and the effective gid at the same |
241a59d9 FC |
290 | time by using C<POSIX::setgid()>. Changes |
291 | to C<$(> require a check to C<$!> | |
b0c22438 | 292 | to detect any possible errors after an attempted change. |
6cef1e77 | 293 | |
241a59d9 | 294 | Mnemonic: parentheses are used to I<group> things. The real gid is the |
b0c22438 | 295 | group you I<left>, if you're running setgid. |
6cef1e77 | 296 | |
b0c22438 | 297 | =item $EFFECTIVE_GROUP_ID |
8e08999f | 298 | |
b0c22438 | 299 | =item $EGID |
81714fb9 | 300 | |
b0c22438 | 301 | =item $) |
302 | X<$)> X<$EGID> X<$EFFECTIVE_GROUP_ID> | |
81714fb9 | 303 | |
241a59d9 | 304 | The effective gid of this process. If you are on a machine that |
b0c22438 | 305 | supports membership in multiple groups simultaneously, gives a space |
241a59d9 | 306 | separated list of groups you are in. The first number is the one |
b0c22438 | 307 | returned by C<getegid()>, and the subsequent ones by C<getgroups()>, |
308 | one of which may be the same as the first number. | |
81714fb9 | 309 | |
b0c22438 | 310 | Similarly, a value assigned to C<$)> must also be a space-separated |
241a59d9 FC |
311 | list of numbers. The first number sets the effective gid, and |
312 | the rest (if any) are passed to C<setgroups()>. To get the effect of an | |
b0c22438 | 313 | empty list for C<setgroups()>, just repeat the new effective gid; that is, |
314 | to force an effective gid of 5 and an effectively empty C<setgroups()> | |
315 | list, say C< $) = "5 5" >. | |
81714fb9 | 316 | |
b0c22438 | 317 | You can change both the effective gid and the real gid at the same |
318 | time by using C<POSIX::setgid()> (use only a single numeric argument). | |
319 | Changes to C<$)> require a check to C<$!> to detect any possible errors | |
320 | after an attempted change. | |
44a2ac75 | 321 | |
b0c22438 | 322 | C<< $< >>, C<< $> >>, C<$(> and C<$)> can be set only on |
241a59d9 | 323 | machines that support the corresponding I<set[re][ug]id()> routine. C<$(> |
b0c22438 | 324 | and C<$)> can be swapped only on machines supporting C<setregid()>. |
3195cf34 | 325 | |
241a59d9 | 326 | Mnemonic: parentheses are used to I<group> things. The effective gid |
b0c22438 | 327 | is the group that's I<right> for you, if you're running setgid. |
44a2ac75 | 328 | |
c82f2f4e DR |
329 | =item $REAL_USER_ID |
330 | ||
331 | =item $UID | |
332 | ||
333 | =item $< | |
334 | X<< $< >> X<$UID> X<$REAL_USER_ID> | |
335 | ||
241a59d9 FC |
336 | The real uid of this process. You can change both the real uid and the |
337 | effective uid at the same time by using C<POSIX::setuid()>. Since | |
c82f2f4e DR |
338 | changes to C<< $< >> require a system call, check C<$!> after a change |
339 | attempt to detect any possible errors. | |
340 | ||
341 | Mnemonic: it's the uid you came I<from>, if you're running setuid. | |
342 | ||
343 | =item $EFFECTIVE_USER_ID | |
344 | ||
345 | =item $EUID | |
346 | ||
347 | =item $> | |
348 | X<< $> >> X<$EUID> X<$EFFECTIVE_USER_ID> | |
349 | ||
241a59d9 | 350 | The effective uid of this process. For example: |
c82f2f4e | 351 | |
9548c15c FC |
352 | $< = $>; # set real to effective uid |
353 | ($<,$>) = ($>,$<); # swap real and effective uids | |
c82f2f4e DR |
354 | |
355 | You can change both the effective uid and the real uid at the same | |
241a59d9 | 356 | time by using C<POSIX::setuid()>. Changes to C<< $> >> require a check |
c82f2f4e DR |
357 | to C<$!> to detect any possible errors after an attempted change. |
358 | ||
359 | C<< $< >> and C<< $> >> can be swapped only on machines | |
360 | supporting C<setreuid()>. | |
361 | ||
362 | Mnemonic: it's the uid you went I<to>, if you're running setuid. | |
363 | ||
0b9346e6 | 364 | =item $SUBSCRIPT_SEPARATOR |
365 | ||
366 | =item $SUBSEP | |
367 | ||
368 | =item $; | |
369 | X<$;> X<$SUBSEP> X<SUBSCRIPT_SEPARATOR> | |
370 | ||
241a59d9 | 371 | The subscript separator for multidimensional array emulation. If you |
0b9346e6 | 372 | refer to a hash element as |
373 | ||
9548c15c | 374 | $foo{$a,$b,$c} |
0b9346e6 | 375 | |
376 | it really means | |
377 | ||
9548c15c | 378 | $foo{join($;, $a, $b, $c)} |
0b9346e6 | 379 | |
380 | But don't put | |
381 | ||
9548c15c | 382 | @foo{$a,$b,$c} # a slice--note the @ |
0b9346e6 | 383 | |
384 | which means | |
385 | ||
9548c15c | 386 | ($foo{$a},$foo{$b},$foo{$c}) |
0b9346e6 | 387 | |
241a59d9 | 388 | Default is "\034", the same as SUBSEP in B<awk>. If your keys contain |
0b9346e6 | 389 | binary data there might not be any safe value for C<$;>. |
390 | ||
391 | Consider using "real" multidimensional arrays as described | |
392 | in L<perllol>. | |
393 | ||
394 | Mnemonic: comma (the syntactic subscript separator) is a semi-semicolon. | |
395 | ||
0b9346e6 | 396 | =item $a |
397 | ||
398 | =item $b | |
399 | X<$a> X<$b> | |
400 | ||
401 | Special package variables when using C<sort()>, see L<perlfunc/sort>. | |
402 | Because of this specialness C<$a> and C<$b> don't need to be declared | |
403 | (using C<use vars>, or C<our()>) even when using the C<strict 'vars'> | |
241a59d9 | 404 | pragma. Don't lexicalize them with C<my $a> or C<my $b> if you want to |
0b9346e6 | 405 | be able to use them in the C<sort()> comparison block or function. |
406 | ||
0b9346e6 | 407 | =item %ENV |
408 | X<%ENV> | |
409 | ||
241a59d9 | 410 | The hash C<%ENV> contains your current environment. Setting a |
0b9346e6 | 411 | value in C<ENV> changes the environment for any child processes |
412 | you subsequently C<fork()> off. | |
413 | ||
b0c22438 | 414 | =item $SYSTEM_FD_MAX |
5b2b9c68 | 415 | |
b0c22438 | 416 | =item $^F |
417 | X<$^F> X<$SYSTEM_FD_MAX> | |
5b2b9c68 | 418 | |
241a59d9 | 419 | The maximum system file descriptor, ordinarily 2. System file |
b0c22438 | 420 | descriptors are passed to C<exec()>ed processes, while higher file |
241a59d9 FC |
421 | descriptors are not. Also, during an |
422 | C<open()>, system file descriptors are | |
b0c22438 | 423 | preserved even if the C<open()> fails (ordinary file descriptors are |
241a59d9 | 424 | closed before the C<open()> is attempted). The close-on-exec |
b0c22438 | 425 | status of a file descriptor will be decided according to the value of |
426 | C<$^F> when the corresponding file, pipe, or socket was opened, not the | |
427 | time of the C<exec()>. | |
5b2b9c68 | 428 | |
0b9346e6 | 429 | =item @F |
430 | X<@F> | |
431 | ||
432 | The array C<@F> contains the fields of each line read in when autosplit | |
241a59d9 | 433 | mode is turned on. See L<perlrun> for the B<-a> switch. This array |
0b9346e6 | 434 | is package-specific, and must be declared or given a full package name |
435 | if not in package main when running under C<strict 'vars'>. | |
436 | ||
0b9346e6 | 437 | =item @INC |
438 | X<@INC> | |
439 | ||
440 | The array C<@INC> contains the list of places that the C<do EXPR>, | |
241a59d9 | 441 | C<require>, or C<use> constructs look for their library files. It |
0b9346e6 | 442 | initially consists of the arguments to any B<-I> command-line |
443 | switches, followed by the default Perl library, probably | |
444 | F</usr/local/lib/perl>, followed by ".", to represent the current | |
241a59d9 | 445 | directory. ("." will not be appended if taint checks are enabled, |
0b9346e6 | 446 | either by C<-T> or by C<-t>.) If you need to modify this at runtime, |
447 | you should use the C<use lib> pragma to get the machine-dependent | |
448 | library properly loaded also: | |
449 | ||
9548c15c FC |
450 | use lib '/mypath/libdir/'; |
451 | use SomeMod; | |
0b9346e6 | 452 | |
453 | You can also insert hooks into the file inclusion system by putting Perl | |
241a59d9 FC |
454 | code directly into C<@INC>. Those hooks may be subroutine references, |
455 | array references or blessed objects. See L<perlfunc/require> for details. | |
0b9346e6 | 456 | |
457 | =item %INC | |
458 | X<%INC> | |
459 | ||
460 | The hash C<%INC> contains entries for each filename included via the | |
241a59d9 | 461 | C<do>, C<require>, or C<use> operators. The key is the filename |
0b9346e6 | 462 | you specified (with module names converted to pathnames), and the |
241a59d9 | 463 | value is the location of the file found. The C<require> |
0b9346e6 | 464 | operator uses this hash to determine whether a particular file has |
465 | already been included. | |
466 | ||
467 | If the file was loaded via a hook (e.g. a subroutine reference, see | |
468 | L<perlfunc/require> for a description of these hooks), this hook is | |
241a59d9 | 469 | by default inserted into C<%INC> in place of a filename. Note, however, |
0b9346e6 | 470 | that the hook may have set the C<%INC> entry by itself to provide some more |
471 | specific info. | |
472 | ||
b0c22438 | 473 | =item $INPLACE_EDIT |
a0d0e21e | 474 | |
b0c22438 | 475 | =item $^I |
476 | X<$^I> X<$INPLACE_EDIT> | |
a0d0e21e | 477 | |
241a59d9 | 478 | The current value of the inplace-edit extension. Use C<undef> to disable |
b0c22438 | 479 | inplace editing. |
a0d0e21e | 480 | |
b0c22438 | 481 | Mnemonic: value of B<-i> switch. |
a0d0e21e | 482 | |
b0c22438 | 483 | =item $^M |
484 | X<$^M> | |
a0d0e21e | 485 | |
b0c22438 | 486 | By default, running out of memory is an untrappable, fatal error. |
487 | However, if suitably built, Perl can use the contents of C<$^M> | |
241a59d9 | 488 | as an emergency memory pool after C<die()>ing. Suppose that your Perl |
b0c22438 | 489 | were compiled with C<-DPERL_EMERGENCY_SBRK> and used Perl's malloc. |
490 | Then | |
a0d0e21e | 491 | |
9548c15c | 492 | $^M = 'a' x (1 << 16); |
a0d0e21e | 493 | |
241a59d9 | 494 | would allocate a 64K buffer for use in an emergency. See the |
b0c22438 | 495 | F<INSTALL> file in the Perl distribution for information on how to |
241a59d9 | 496 | add custom C compilation flags when compiling perl. To discourage casual |
b0c22438 | 497 | use of this advanced feature, there is no L<English|English> long name for |
498 | this variable. | |
a0d0e21e | 499 | |
b0c22438 | 500 | This variable was added in Perl 5.004. |
a0d0e21e | 501 | |
b0c22438 | 502 | =item $OSNAME |
a0d0e21e | 503 | |
b0c22438 | 504 | =item $^O |
505 | X<$^O> X<$OSNAME> | |
a0d0e21e | 506 | |
b0c22438 | 507 | The name of the operating system under which this copy of Perl was |
241a59d9 | 508 | built, as determined during the configuration process. For examples |
b0c22438 | 509 | see L<perlport/PLATFORMS>. |
a0d0e21e | 510 | |
241a59d9 | 511 | The value is identical to C<$Config{'osname'}>. See also L<Config> |
b0c22438 | 512 | and the B<-V> command-line switch documented in L<perlrun>. |
a0d0e21e | 513 | |
b0c22438 | 514 | In Windows platforms, C<$^O> is not very helpful: since it is always |
515 | C<MSWin32>, it doesn't tell the difference between | |
241a59d9 | 516 | 95/98/ME/NT/2000/XP/CE/.NET. Use C<Win32::GetOSName()> or |
b0c22438 | 517 | Win32::GetOSVersion() (see L<Win32> and L<perlport>) to distinguish |
518 | between the variants. | |
a0d0e21e | 519 | |
b0c22438 | 520 | This variable was added in Perl 5.003. |
a0d0e21e | 521 | |
1fa81471 DR |
522 | =item %SIG |
523 | X<%SIG> | |
a0d0e21e | 524 | |
241a59d9 | 525 | The hash C<%SIG> contains signal handlers for signals. For example: |
a0d0e21e | 526 | |
9548c15c FC |
527 | sub handler { # 1st argument is signal name |
528 | my($sig) = @_; | |
529 | print "Caught a SIG$sig--shutting down\n"; | |
530 | close(LOG); | |
531 | exit(0); | |
532 | } | |
a0d0e21e | 533 | |
9548c15c FC |
534 | $SIG{'INT'} = \&handler; |
535 | $SIG{'QUIT'} = \&handler; | |
536 | ... | |
537 | $SIG{'INT'} = 'DEFAULT'; # restore default action | |
538 | $SIG{'QUIT'} = 'IGNORE'; # ignore SIGQUIT | |
a0d0e21e | 539 | |
1fa81471 | 540 | Using a value of C<'IGNORE'> usually has the effect of ignoring the |
241a59d9 | 541 | signal, except for the C<CHLD> signal. See L<perlipc> for more about |
1fa81471 | 542 | this special case. |
a0d0e21e | 543 | |
1fa81471 | 544 | Here are some other examples: |
a0d0e21e | 545 | |
9548c15c FC |
546 | $SIG{"PIPE"} = "Plumber"; # assumes main::Plumber (not |
547 | # recommended) | |
548 | $SIG{"PIPE"} = \&Plumber; # just fine; assume current | |
549 | # Plumber | |
550 | $SIG{"PIPE"} = *Plumber; # somewhat esoteric | |
551 | $SIG{"PIPE"} = Plumber(); # oops, what did Plumber() | |
552 | # return?? | |
a0d0e21e | 553 | |
1fa81471 DR |
554 | Be sure not to use a bareword as the name of a signal handler, |
555 | lest you inadvertently call it. | |
a0d0e21e | 556 | |
1fa81471 | 557 | If your system has the C<sigaction()> function then signal handlers |
241a59d9 | 558 | are installed using it. This means you get reliable signal handling. |
a0d0e21e | 559 | |
60cf4914 | 560 | The default delivery policy of signals changed in Perl v5.8.0 from |
1fa81471 | 561 | immediate (also known as "unsafe") to deferred, also known as "safe |
241a59d9 | 562 | signals". See L<perlipc> for more information. |
a0d0e21e | 563 | |
241a59d9 | 564 | Certain internal hooks can be also set using the C<%SIG> hash. The |
1fa81471 | 565 | routine indicated by C<$SIG{__WARN__}> is called when a warning |
241a59d9 FC |
566 | message is about to be printed. The warning message is passed as the |
567 | first argument. The presence of a C<__WARN__> hook causes the | |
568 | ordinary printing of warnings to C<STDERR> to be suppressed. You can | |
1fa81471 DR |
569 | use this to save warnings in a variable, or turn warnings into fatal |
570 | errors, like this: | |
a0d0e21e | 571 | |
9548c15c FC |
572 | local $SIG{__WARN__} = sub { die $_[0] }; |
573 | eval $proggie; | |
a8f8344d | 574 | |
b0c22438 | 575 | As the C<'IGNORE'> hook is not supported by C<__WARN__>, you can |
576 | disable warnings using the empty subroutine: | |
f86702cc | 577 | |
9548c15c | 578 | local $SIG{__WARN__} = sub {}; |
55602bd2 | 579 | |
b0c22438 | 580 | The routine indicated by C<$SIG{__DIE__}> is called when a fatal |
241a59d9 FC |
581 | exception is about to be thrown. The error message is passed as the |
582 | first argument. When a C<__DIE__> hook routine returns, the exception | |
b0c22438 | 583 | processing continues as it would have in the absence of the hook, |
c94b42ea DM |
584 | unless the hook routine itself exits via a C<goto &sub>, a loop exit, |
585 | or a C<die()>. The C<__DIE__> handler is explicitly disabled during | |
586 | the call, so that you can die from a C<__DIE__> handler. Similarly | |
587 | for C<__WARN__>. | |
e5218da5 | 588 | |
b0c22438 | 589 | Due to an implementation glitch, the C<$SIG{__DIE__}> hook is called |
241a59d9 | 590 | even inside an C<eval()>. Do not use this to rewrite a pending |
b0c22438 | 591 | exception in C<$@>, or as a bizarre substitute for overriding |
241a59d9 | 592 | C<CORE::GLOBAL::die()>. This strange action at a distance may be fixed |
b0c22438 | 593 | in a future release so that C<$SIG{__DIE__}> is only called if your |
241a59d9 | 594 | program is about to exit, as was the original intent. Any other use is |
b0c22438 | 595 | deprecated. |
596 | ||
597 | C<__DIE__>/C<__WARN__> handlers are very special in one respect: they | |
241a59d9 | 598 | may be called to report (probable) errors found by the parser. In such |
b0c22438 | 599 | a case the parser may be in inconsistent state, so any attempt to |
600 | evaluate Perl code from such a handler will probably result in a | |
241a59d9 | 601 | segfault. This means that warnings or errors that result from parsing |
b0c22438 | 602 | Perl should be used with extreme caution, like this: |
e5218da5 | 603 | |
9548c15c FC |
604 | require Carp if defined $^S; |
605 | Carp::confess("Something wrong") if defined &Carp::confess; | |
606 | die "Something wrong, but could not load Carp to give " | |
607 | . "backtrace...\n\t" | |
608 | . "To see backtrace try starting Perl with -MCarp switch"; | |
e5218da5 | 609 | |
b0c22438 | 610 | Here the first line will load C<Carp> I<unless> it is the parser who |
241a59d9 FC |
611 | called the handler. The second line will print backtrace and die if |
612 | C<Carp> was available. The third line will be executed only if C<Carp> was | |
b0c22438 | 613 | not available. |
0a378802 | 614 | |
0b9346e6 | 615 | Having to even think about the C<$^S> variable in your exception |
241a59d9 FC |
616 | handlers is simply wrong. C<$SIG{__DIE__}> as currently implemented |
617 | invites grievous and difficult to track down errors. Avoid it | |
0b9346e6 | 618 | and use an C<END{}> or CORE::GLOBAL::die override instead. |
619 | ||
b0c22438 | 620 | See L<perlfunc/die>, L<perlfunc/warn>, L<perlfunc/eval>, and |
621 | L<warnings> for additional information. | |
0a378802 | 622 | |
b0c22438 | 623 | =item $BASETIME |
6ab308ee | 624 | |
b0c22438 | 625 | =item $^T |
626 | X<$^T> X<$BASETIME> | |
6ab308ee | 627 | |
b0c22438 | 628 | The time at which the program began running, in seconds since the |
241a59d9 | 629 | epoch (beginning of 1970). The values returned by the B<-M>, B<-A>, |
b0c22438 | 630 | and B<-C> filetests are based on this value. |
a0d0e21e | 631 | |
b0c22438 | 632 | =item $PERL_VERSION |
a0d0e21e | 633 | |
b0c22438 | 634 | =item $^V |
635 | X<$^V> X<$PERL_VERSION> | |
a0d0e21e | 636 | |
b0c22438 | 637 | The revision, version, and subversion of the Perl interpreter, |
638 | represented as a C<version> object. | |
748a9306 | 639 | |
60cf4914 BF |
640 | This variable first appeared in perl v5.6.0; earlier versions of perl |
641 | will see an undefined value. Before perl v5.10.0 C<$^V> was represented | |
b0c22438 | 642 | as a v-string. |
55602bd2 | 643 | |
b0c22438 | 644 | C<$^V> can be used to determine whether the Perl interpreter executing |
241a59d9 | 645 | a script is in the right range of versions. For example: |
a0d0e21e | 646 | |
9548c15c | 647 | warn "Hashes not randomized!\n" if !$^V or $^V lt v5.8.1 |
a0d0e21e | 648 | |
b0c22438 | 649 | To convert C<$^V> into its string representation use C<sprintf()>'s |
650 | C<"%vd"> conversion: | |
a0d0e21e | 651 | |
9548c15c | 652 | printf "version is v%vd\n", $^V; # Perl's version |
a0d0e21e | 653 | |
b0c22438 | 654 | See the documentation of C<use VERSION> and C<require VERSION> |
655 | for a convenient way to fail if the running Perl interpreter is too old. | |
4d76a344 | 656 | |
b0c22438 | 657 | See also C<$]> for an older representation of the Perl version. |
a0d0e21e | 658 | |
60cf4914 | 659 | This variable was added in Perl v5.6.0. |
a0d0e21e | 660 | |
b0c22438 | 661 | Mnemonic: use ^V for Version Control. |
a0d0e21e | 662 | |
b0c22438 | 663 | =item ${^WIN32_SLOPPY_STAT} |
5b442a2a | 664 | X<${^WIN32_SLOPPY_STAT}> X<sitecustomize> X<sitecustomize.pl> |
a0d0e21e | 665 | |
b0c22438 | 666 | If this variable is set to a true value, then C<stat()> on Windows will |
241a59d9 | 667 | not try to open the file. This means that the link count cannot be |
b0c22438 | 668 | determined and file attributes may be out of date if additional |
241a59d9 | 669 | hardlinks to the file exist. On the other hand, not opening the file |
b0c22438 | 670 | is considerably faster, especially for files on network drives. |
a0d0e21e | 671 | |
b0c22438 | 672 | This variable could be set in the F<sitecustomize.pl> file to |
673 | configure the local Perl installation to use "sloppy" C<stat()> by | |
241a59d9 | 674 | default. See the documentation for B<-f> in |
b0c22438 | 675 | L<perlrun|perlrun/"Command Switches"> for more information about site |
676 | customization. | |
a0d0e21e | 677 | |
60cf4914 | 678 | This variable was added in Perl v5.10.0. |
a0d0e21e | 679 | |
b0c22438 | 680 | =item $EXECUTABLE_NAME |
a0d0e21e | 681 | |
b0c22438 | 682 | =item $^X |
683 | X<$^X> X<$EXECUTABLE_NAME> | |
a0d0e21e | 684 | |
b0c22438 | 685 | The name used to execute the current copy of Perl, from C's |
686 | C<argv[0]> or (where supported) F</proc/self/exe>. | |
a043a685 | 687 | |
b0c22438 | 688 | Depending on the host operating system, the value of C<$^X> may be |
689 | a relative or absolute pathname of the perl program file, or may | |
690 | be the string used to invoke perl but not the pathname of the | |
241a59d9 | 691 | perl program file. Also, most operating systems permit invoking |
b0c22438 | 692 | programs that are not in the PATH environment variable, so there |
241a59d9 | 693 | is no guarantee that the value of C<$^X> is in PATH. For VMS, the |
b0c22438 | 694 | value may or may not include a version number. |
a0d0e21e | 695 | |
b0c22438 | 696 | You usually can use the value of C<$^X> to re-invoke an independent |
697 | copy of the same perl that is currently running, e.g., | |
a0d0e21e | 698 | |
9548c15c | 699 | @first_run = `$^X -le "print int rand 100 for 1..100"`; |
a0d0e21e | 700 | |
b0c22438 | 701 | But recall that not all operating systems support forking or |
702 | capturing of the output of commands, so this complex statement | |
703 | may not be portable. | |
a0d0e21e | 704 | |
b0c22438 | 705 | It is not safe to use the value of C<$^X> as a path name of a file, |
706 | as some operating systems that have a mandatory suffix on | |
707 | executable files do not require use of the suffix when invoking | |
241a59d9 | 708 | a command. To convert the value of C<$^X> to a path name, use the |
b0c22438 | 709 | following statements: |
8cc95fdb | 710 | |
9548c15c FC |
711 | # Build up a set of file names (not command names). |
712 | use Config; | |
713 | my $this_perl = $^X; | |
714 | if ($^O ne 'VMS') { | |
715 | $this_perl .= $Config{_exe} | |
716 | unless $this_perl =~ m/$Config{_exe}$/i; | |
717 | } | |
8cc95fdb | 718 | |
b0c22438 | 719 | Because many operating systems permit anyone with read access to |
720 | the Perl program file to make a copy of it, patch the copy, and | |
721 | then execute the copy, the security-conscious Perl programmer | |
722 | should take care to invoke the installed copy of perl, not the | |
241a59d9 | 723 | copy referenced by C<$^X>. The following statements accomplish |
b0c22438 | 724 | this goal, and produce a pathname that can be invoked as a |
725 | command or referenced as a file. | |
a043a685 | 726 | |
9548c15c FC |
727 | use Config; |
728 | my $secure_perl_path = $Config{perlpath}; | |
729 | if ($^O ne 'VMS') { | |
730 | $secure_perl_path .= $Config{_exe} | |
731 | unless $secure_perl_path =~ m/$Config{_exe}$/i; | |
732 | } | |
a0d0e21e | 733 | |
b0c22438 | 734 | =back |
a0d0e21e | 735 | |
b0c22438 | 736 | =head2 Variables related to regular expressions |
737 | ||
738 | Most of the special variables related to regular expressions are side | |
241a59d9 FC |
739 | effects. Perl sets these variables when it has a successful match, so |
740 | you should check the match result before using them. For instance: | |
b0c22438 | 741 | |
9548c15c FC |
742 | if( /P(A)TT(ER)N/ ) { |
743 | print "I found $1 and $2\n"; | |
744 | } | |
b0c22438 | 745 | |
0b9346e6 | 746 | These variables are read-only and dynamically-scoped, unless we note |
b0c22438 | 747 | otherwise. |
748 | ||
0b9346e6 | 749 | The dynamic nature of the regular expression variables means that |
750 | their value is limited to the block that they are in, as demonstrated | |
751 | by this bit of code: | |
b0c22438 | 752 | |
9548c15c FC |
753 | my $outer = 'Wallace and Grommit'; |
754 | my $inner = 'Mutt and Jeff'; | |
0b9346e6 | 755 | |
9548c15c | 756 | my $pattern = qr/(\S+) and (\S+)/; |
0b9346e6 | 757 | |
9548c15c | 758 | sub show_n { print "\$1 is $1; \$2 is $2\n" } |
0b9346e6 | 759 | |
9548c15c FC |
760 | { |
761 | OUTER: | |
762 | show_n() if $outer =~ m/$pattern/; | |
0b9346e6 | 763 | |
9548c15c FC |
764 | INNER: { |
765 | show_n() if $inner =~ m/$pattern/; | |
766 | } | |
0b9346e6 | 767 | |
9548c15c FC |
768 | show_n(); |
769 | } | |
b0c22438 | 770 | |
0b9346e6 | 771 | The output shows that while in the C<OUTER> block, the values of C<$1> |
241a59d9 | 772 | and C<$2> are from the match against C<$outer>. Inside the C<INNER> |
0b9346e6 | 773 | block, the values of C<$1> and C<$2> are from the match against |
774 | C<$inner>, but only until the end of the block (i.e. the dynamic | |
241a59d9 | 775 | scope). After the C<INNER> block completes, the values of C<$1> and |
0b9346e6 | 776 | C<$2> return to the values for the match against C<$outer> even though |
b0c22438 | 777 | we have not made another match: |
778 | ||
9548c15c FC |
779 | $1 is Wallace; $2 is Grommit |
780 | $1 is Mutt; $2 is Jeff | |
781 | $1 is Wallace; $2 is Grommit | |
a0d0e21e | 782 | |
0b9346e6 | 783 | Due to an unfortunate accident of Perl's implementation, C<use |
784 | English> imposes a considerable performance penalty on all regular | |
785 | expression matches in a program because it uses the C<$`>, C<$&>, and | |
786 | C<$'>, regardless of whether they occur in the scope of C<use | |
241a59d9 | 787 | English>. For that reason, saying C<use English> in libraries is |
0b9346e6 | 788 | strongly discouraged unless you import it without the match variables: |
789 | ||
9548c15c | 790 | use English '-no_match_vars' |
0b9346e6 | 791 | |
d8a75b5a FC |
792 | The C<Devel::NYTProf> and C<Devel::FindAmpersand> |
793 | modules can help you find uses of these | |
0b9346e6 | 794 | problematic match variables in your code. |
795 | ||
60cf4914 | 796 | Since Perl v5.10.0, you can use the C</p> match operator flag and the |
0b9346e6 | 797 | C<${^PREMATCH}>, C<${^MATCH}>, and C<${^POSTMATCH}> variables instead |
798 | so you only suffer the performance penalties. | |
799 | ||
b0c22438 | 800 | =over 8 |
a0d0e21e | 801 | |
b0c22438 | 802 | =item $<I<digits>> ($1, $2, ...) |
803 | X<$1> X<$2> X<$3> | |
8cc95fdb | 804 | |
b0c22438 | 805 | Contains the subpattern from the corresponding set of capturing |
806 | parentheses from the last successful pattern match, not counting patterns | |
807 | matched in nested blocks that have been exited already. | |
8cc95fdb | 808 | |
b0c22438 | 809 | These variables are read-only and dynamically-scoped. |
a043a685 | 810 | |
b0c22438 | 811 | Mnemonic: like \digits. |
a0d0e21e | 812 | |
b0c22438 | 813 | =item $MATCH |
a0d0e21e | 814 | |
b0c22438 | 815 | =item $& |
816 | X<$&> X<$MATCH> | |
a0d0e21e | 817 | |
b0c22438 | 818 | The string matched by the last successful pattern match (not counting |
819 | any matches hidden within a BLOCK or C<eval()> enclosed by the current | |
820 | BLOCK). | |
a0d0e21e | 821 | |
b0c22438 | 822 | The use of this variable anywhere in a program imposes a considerable |
241a59d9 FC |
823 | performance penalty on all regular expression matches. To avoid this |
824 | penalty, you can extract the same substring by using L</@->. Starting | |
60cf4914 | 825 | with Perl v5.10.0, you can use the C</p> match flag and the C<${^MATCH}> |
0b9346e6 | 826 | variable to do the same thing for particular match operations. |
80bca1b4 | 827 | |
b0c22438 | 828 | This variable is read-only and dynamically-scoped. |
f9cbb277 | 829 | |
b0c22438 | 830 | Mnemonic: like C<&> in some editors. |
0b9346e6 | 831 | |
b0c22438 | 832 | =item ${^MATCH} |
833 | X<${^MATCH}> | |
a0d0e21e | 834 | |
b0c22438 | 835 | This is similar to C<$&> (C<$MATCH>) except that it does not incur the |
836 | performance penalty associated with that variable, and is only guaranteed | |
837 | to return a defined value when the pattern was compiled or executed with | |
838 | the C</p> modifier. | |
80bca1b4 | 839 | |
60cf4914 | 840 | This variable was added in Perl v5.10.0. |
4bc88a62 | 841 | |
b0c22438 | 842 | This variable is read-only and dynamically-scoped. |
e2975953 | 843 | |
b0c22438 | 844 | =item $PREMATCH |
52c447a8 | 845 | |
b0c22438 | 846 | =item $` |
5b442a2a | 847 | X<$`> X<$PREMATCH> X<${^PREMATCH}> |
7636ea95 | 848 | |
b0c22438 | 849 | The string preceding whatever was matched by the last successful |
850 | pattern match, not counting any matches hidden within a BLOCK or C<eval> | |
0b9346e6 | 851 | enclosed by the current BLOCK. |
a0d0e21e | 852 | |
b0c22438 | 853 | The use of this variable anywhere in a program imposes a considerable |
241a59d9 FC |
854 | performance penalty on all regular expression matches. To avoid this |
855 | penalty, you can extract the same substring by using L</@->. Starting | |
60cf4914 | 856 | with Perl v5.10.0, you can use the C</p> match flag and the |
0b9346e6 | 857 | C<${^PREMATCH}> variable to do the same thing for particular match |
858 | operations. | |
a0d0e21e | 859 | |
b0c22438 | 860 | This variable is read-only and dynamically-scoped. |
a0d0e21e | 861 | |
b0c22438 | 862 | Mnemonic: C<`> often precedes a quoted string. |
f83ed198 | 863 | |
b0c22438 | 864 | =item ${^PREMATCH} |
5b442a2a | 865 | X<$`> X<${^PREMATCH}> |
a0d0e21e | 866 | |
b0c22438 | 867 | This is similar to C<$`> ($PREMATCH) except that it does not incur the |
868 | performance penalty associated with that variable, and is only guaranteed | |
869 | to return a defined value when the pattern was compiled or executed with | |
870 | the C</p> modifier. | |
a0d0e21e | 871 | |
60cf4914 | 872 | This variable was added in Perl v5.10.0 |
a0d0e21e | 873 | |
b0c22438 | 874 | This variable is read-only and dynamically-scoped. |
a0d0e21e | 875 | |
b0c22438 | 876 | =item $POSTMATCH |
16070b82 | 877 | |
b0c22438 | 878 | =item $' |
5b442a2a | 879 | X<$'> X<$POSTMATCH> X<${^POSTMATCH}> X<@-> |
305aace0 | 880 | |
b0c22438 | 881 | The string following whatever was matched by the last successful |
882 | pattern match (not counting any matches hidden within a BLOCK or C<eval()> | |
241a59d9 | 883 | enclosed by the current BLOCK). Example: |
305aace0 | 884 | |
9548c15c FC |
885 | local $_ = 'abcdefghi'; |
886 | /def/; | |
887 | print "$`:$&:$'\n"; # prints abc:def:ghi | |
305aace0 | 888 | |
b0c22438 | 889 | The use of this variable anywhere in a program imposes a considerable |
0b9346e6 | 890 | performance penalty on all regular expression matches. |
891 | To avoid this penalty, you can extract the same substring by | |
60cf4914 | 892 | using L</@->. Starting with Perl v5.10.0, you can use the C</p> match flag |
0b9346e6 | 893 | and the C<${^POSTMATCH}> variable to do the same thing for particular |
b0c22438 | 894 | match operations. |
a0d0e21e | 895 | |
b0c22438 | 896 | This variable is read-only and dynamically-scoped. |
897 | ||
898 | Mnemonic: C<'> often follows a quoted string. | |
899 | ||
900 | =item ${^POSTMATCH} | |
5b442a2a | 901 | X<${^POSTMATCH}> X<$'> X<$POSTMATCH> |
b0c22438 | 902 | |
903 | This is similar to C<$'> (C<$POSTMATCH>) except that it does not incur the | |
904 | performance penalty associated with that variable, and is only guaranteed | |
905 | to return a defined value when the pattern was compiled or executed with | |
906 | the C</p> modifier. | |
907 | ||
60cf4914 | 908 | This variable was added in Perl v5.10.0. |
b0c22438 | 909 | |
910 | This variable is read-only and dynamically-scoped. | |
911 | ||
912 | =item $LAST_PAREN_MATCH | |
913 | ||
914 | =item $+ | |
915 | X<$+> X<$LAST_PAREN_MATCH> | |
916 | ||
917 | The text matched by the last bracket of the last successful search pattern. | |
918 | This is useful if you don't know which one of a set of alternative patterns | |
241a59d9 | 919 | matched. For example: |
b0c22438 | 920 | |
9548c15c | 921 | /Version: (.*)|Revision: (.*)/ && ($rev = $+); |
b0c22438 | 922 | |
923 | This variable is read-only and dynamically-scoped. | |
924 | ||
925 | Mnemonic: be positive and forward looking. | |
926 | ||
927 | =item $LAST_SUBMATCH_RESULT | |
928 | ||
929 | =item $^N | |
5b442a2a | 930 | X<$^N> X<$LAST_SUBMATCH_RESULT> |
b0c22438 | 931 | |
932 | The text matched by the used group most-recently closed (i.e. the group | |
933 | with the rightmost closing parenthesis) of the last successful search | |
934 | pattern. | |
935 | ||
936 | This is primarily used inside C<(?{...})> blocks for examining text | |
241a59d9 | 937 | recently matched. For example, to effectively capture text to a variable |
b0c22438 | 938 | (in addition to C<$1>, C<$2>, etc.), replace C<(...)> with |
939 | ||
9548c15c | 940 | (?:(...)(?{ $var = $^N })) |
b0c22438 | 941 | |
942 | By setting and then using C<$var> in this way relieves you from having to | |
943 | worry about exactly which numbered set of parentheses they are. | |
944 | ||
60cf4914 | 945 | This variable was added in Perl v5.8.0. |
b0c22438 | 946 | |
947 | Mnemonic: the (possibly) Nested parenthesis that most recently closed. | |
948 | ||
949 | =item @LAST_MATCH_END | |
950 | ||
951 | =item @+ | |
952 | X<@+> X<@LAST_MATCH_END> | |
953 | ||
954 | This array holds the offsets of the ends of the last successful | |
241a59d9 FC |
955 | submatches in the currently active dynamic scope. C<$+[0]> is |
956 | the offset into the string of the end of the entire match. This | |
b0c22438 | 957 | is the same value as what the C<pos> function returns when called |
241a59d9 | 958 | on the variable that was matched against. The I<n>th element |
b0c22438 | 959 | of this array holds the offset of the I<n>th submatch, so |
960 | C<$+[1]> is the offset past where C<$1> ends, C<$+[2]> the offset | |
241a59d9 FC |
961 | past where C<$2> ends, and so on. You can use C<$#+> to determine |
962 | how many subgroups were in the last successful match. See the | |
b0c22438 | 963 | examples given for the C<@-> variable. |
964 | ||
60cf4914 | 965 | This variable was added in Perl v5.6.0. |
b0c22438 | 966 | |
967 | =item %LAST_PAREN_MATCH | |
968 | ||
969 | =item %+ | |
5b442a2a | 970 | X<%+> X<%LAST_PAREN_MATCH> |
b0c22438 | 971 | |
972 | Similar to C<@+>, the C<%+> hash allows access to the named capture | |
973 | buffers, should they exist, in the last successful match in the | |
974 | currently active dynamic scope. | |
975 | ||
976 | For example, C<$+{foo}> is equivalent to C<$1> after the following match: | |
977 | ||
9548c15c | 978 | 'foo' =~ /(?<foo>foo)/; |
b0c22438 | 979 | |
980 | The keys of the C<%+> hash list only the names of buffers that have | |
981 | captured (and that are thus associated to defined values). | |
982 | ||
983 | The underlying behaviour of C<%+> is provided by the | |
984 | L<Tie::Hash::NamedCapture> module. | |
985 | ||
986 | B<Note:> C<%-> and C<%+> are tied views into a common internal hash | |
241a59d9 | 987 | associated with the last successful regular expression. Therefore mixing |
b0c22438 | 988 | iterative access to them via C<each> may have unpredictable results. |
989 | Likewise, if the last successful match changes, then the results may be | |
990 | surprising. | |
991 | ||
60cf4914 | 992 | This variable was added in Perl v5.10.0. |
a0d0e21e | 993 | |
b0c22438 | 994 | This variable is read-only and dynamically-scoped. |
995 | ||
996 | =item @LAST_MATCH_START | |
997 | ||
998 | =item @- | |
999 | X<@-> X<@LAST_MATCH_START> | |
1000 | ||
1001 | C<$-[0]> is the offset of the start of the last successful match. | |
1002 | C<$-[>I<n>C<]> is the offset of the start of the substring matched by | |
1003 | I<n>-th subpattern, or undef if the subpattern did not match. | |
1004 | ||
1005 | Thus, after a match against C<$_>, C<$&> coincides with C<substr $_, $-[0], | |
241a59d9 | 1006 | $+[0] - $-[0]>. Similarly, $I<n> coincides with C<substr $_, $-[n], |
b0c22438 | 1007 | $+[n] - $-[n]> if C<$-[n]> is defined, and $+ coincides with |
241a59d9 FC |
1008 | C<substr $_, $-[$#-], $+[$#-] - $-[$#-]>. One can use C<$#-> to find the |
1009 | last matched subgroup in the last successful match. Contrast with | |
1010 | C<$#+>, the number of subgroups in the regular expression. Compare | |
b0c22438 | 1011 | with C<@+>. |
1012 | ||
1013 | This array holds the offsets of the beginnings of the last | |
1014 | successful submatches in the currently active dynamic scope. | |
1015 | C<$-[0]> is the offset into the string of the beginning of the | |
241a59d9 | 1016 | entire match. The I<n>th element of this array holds the offset |
b0c22438 | 1017 | of the I<n>th submatch, so C<$-[1]> is the offset where C<$1> |
1018 | begins, C<$-[2]> the offset where C<$2> begins, and so on. | |
1019 | ||
1020 | After a match against some variable C<$var>: | |
1021 | ||
1022 | =over 5 | |
1023 | ||
1024 | =item C<$`> is the same as C<substr($var, 0, $-[0])> | |
1025 | ||
1026 | =item C<$&> is the same as C<substr($var, $-[0], $+[0] - $-[0])> | |
1027 | ||
1028 | =item C<$'> is the same as C<substr($var, $+[0])> | |
1029 | ||
1030 | =item C<$1> is the same as C<substr($var, $-[1], $+[1] - $-[1])> | |
1031 | ||
1032 | =item C<$2> is the same as C<substr($var, $-[2], $+[2] - $-[2])> | |
1033 | ||
1034 | =item C<$3> is the same as C<substr($var, $-[3], $+[3] - $-[3])> | |
1035 | ||
1036 | =back | |
1037 | ||
60cf4914 | 1038 | This variable was added in Perl v5.6.0. |
b0c22438 | 1039 | |
5b442a2a | 1040 | =item %LAST_MATCH_START |
1041 | ||
b0c22438 | 1042 | =item %- |
5b442a2a | 1043 | X<%-> X<%LAST_MATCH_START> |
b0c22438 | 1044 | |
1045 | Similar to C<%+>, this variable allows access to the named capture groups | |
241a59d9 | 1046 | in the last successful match in the currently active dynamic scope. To |
b0c22438 | 1047 | each capture group name found in the regular expression, it associates a |
1048 | reference to an array containing the list of values captured by all | |
1049 | buffers with that name (should there be several of them), in the order | |
1050 | where they appear. | |
1051 | ||
1052 | Here's an example: | |
1053 | ||
1054 | if ('1234' =~ /(?<A>1)(?<B>2)(?<A>3)(?<B>4)/) { | |
1055 | foreach my $bufname (sort keys %-) { | |
1056 | my $ary = $-{$bufname}; | |
1057 | foreach my $idx (0..$#$ary) { | |
1058 | print "\$-{$bufname}[$idx] : ", | |
9548c15c FC |
1059 | (defined($ary->[$idx]) |
1060 | ? "'$ary->[$idx]'" | |
1061 | : "undef"), | |
b0c22438 | 1062 | "\n"; |
1063 | } | |
1064 | } | |
1065 | } | |
1066 | ||
1067 | would print out: | |
1068 | ||
9548c15c FC |
1069 | $-{A}[0] : '1' |
1070 | $-{A}[1] : '3' | |
1071 | $-{B}[0] : '2' | |
1072 | $-{B}[1] : '4' | |
b0c22438 | 1073 | |
1074 | The keys of the C<%-> hash correspond to all buffer names found in | |
1075 | the regular expression. | |
1076 | ||
1077 | The behaviour of C<%-> is implemented via the | |
1078 | L<Tie::Hash::NamedCapture> module. | |
1079 | ||
1080 | B<Note:> C<%-> and C<%+> are tied views into a common internal hash | |
241a59d9 | 1081 | associated with the last successful regular expression. Therefore mixing |
b0c22438 | 1082 | iterative access to them via C<each> may have unpredictable results. |
1083 | Likewise, if the last successful match changes, then the results may be | |
1084 | surprising. | |
1085 | ||
60cf4914 | 1086 | This variable was added in Perl v5.10.0. |
b0c22438 | 1087 | |
1088 | This variable is read-only and dynamically-scoped. | |
1089 | ||
1090 | =item $LAST_REGEXP_CODE_RESULT | |
1091 | ||
1092 | =item $^R | |
1093 | X<$^R> X<$LAST_REGEXP_CODE_RESULT> | |
1094 | ||
1095 | The result of evaluation of the last successful C<(?{ code })> | |
241a59d9 | 1096 | regular expression assertion (see L<perlre>). May be written to. |
b0c22438 | 1097 | |
1098 | This variable was added in Perl 5.005. | |
a0d0e21e | 1099 | |
a3621e74 | 1100 | =item ${^RE_DEBUG_FLAGS} |
ca1b95ae | 1101 | X<${^RE_DEBUG_FLAGS}> |
a3621e74 | 1102 | |
241a59d9 FC |
1103 | The current value of the regex debugging flags. Set to 0 for no debug output |
1104 | even when the C<re 'debug'> module is loaded. See L<re> for details. | |
b0c22438 | 1105 | |
60cf4914 | 1106 | This variable was added in Perl v5.10.0. |
a3621e74 | 1107 | |
0111c4fd | 1108 | =item ${^RE_TRIE_MAXBUF} |
ca1b95ae | 1109 | X<${^RE_TRIE_MAXBUF}> |
a3621e74 YO |
1110 | |
1111 | Controls how certain regex optimisations are applied and how much memory they | |
241a59d9 FC |
1112 | utilize. This value by default is 65536 which corresponds to a 512kB |
1113 | temporary cache. Set this to a higher value to trade | |
1114 | memory for speed when matching large alternations. Set | |
1115 | it to a lower value if you want the optimisations to | |
a3621e74 YO |
1116 | be as conservative of memory as possible but still occur, and set it to a |
1117 | negative value to prevent the optimisation and conserve the most memory. | |
1118 | Under normal situations this variable should be of no interest to you. | |
1119 | ||
60cf4914 | 1120 | This variable was added in Perl v5.10.0. |
a0d0e21e | 1121 | |
b0c22438 | 1122 | =back |
a0d0e21e | 1123 | |
b0c22438 | 1124 | =head2 Variables related to filehandles |
a0d0e21e | 1125 | |
b0c22438 | 1126 | Variables that depend on the currently selected filehandle may be set |
1127 | by calling an appropriate object method on the C<IO::Handle> object, | |
1128 | although this is less efficient than using the regular built-in | |
241a59d9 | 1129 | variables. (Summary lines below for this contain the word HANDLE.) |
b0c22438 | 1130 | First you must say |
6e2995f4 | 1131 | |
9548c15c | 1132 | use IO::Handle; |
0462a1ab | 1133 | |
b0c22438 | 1134 | after which you may use either |
0462a1ab | 1135 | |
9548c15c | 1136 | method HANDLE EXPR |
0462a1ab | 1137 | |
b0c22438 | 1138 | or more safely, |
0462a1ab | 1139 | |
9548c15c | 1140 | HANDLE->method(EXPR) |
0462a1ab | 1141 | |
241a59d9 | 1142 | Each method returns the old value of the C<IO::Handle> attribute. The |
b0c22438 | 1143 | methods each take an optional EXPR, which, if supplied, specifies the |
241a59d9 | 1144 | new value for the C<IO::Handle> attribute in question. If not |
b0c22438 | 1145 | supplied, most methods do nothing to the current value--except for |
1146 | C<autoflush()>, which will assume a 1 for you, just to be different. | |
0462a1ab | 1147 | |
b0c22438 | 1148 | Because loading in the C<IO::Handle> class is an expensive operation, |
1149 | you should learn how to use the regular built-in variables. | |
1150 | ||
241a59d9 | 1151 | A few of these variables are considered "read-only". This means that |
b0c22438 | 1152 | if you try to assign to this variable, either directly or indirectly |
1153 | through a reference, you'll raise a run-time exception. | |
1154 | ||
1155 | You should be very careful when modifying the default values of most | |
241a59d9 | 1156 | special variables described in this document. In most cases you want |
b0c22438 | 1157 | to localize these variables before changing them, since if you don't, |
1158 | the change may affect other modules which rely on the default values | |
241a59d9 | 1159 | of the special variables that you have changed. This is one of the |
b0c22438 | 1160 | correct ways to read the whole file at once: |
1161 | ||
9548c15c FC |
1162 | open my $fh, "<", "foo" or die $!; |
1163 | local $/; # enable localized slurp mode | |
1164 | my $content = <$fh>; | |
1165 | close $fh; | |
b0c22438 | 1166 | |
1167 | But the following code is quite bad: | |
1168 | ||
9548c15c FC |
1169 | open my $fh, "<", "foo" or die $!; |
1170 | undef $/; # enable slurp mode | |
1171 | my $content = <$fh>; | |
1172 | close $fh; | |
b0c22438 | 1173 | |
1174 | since some other module, may want to read data from some file in the | |
1175 | default "line mode", so if the code we have just presented has been | |
1176 | executed, the global value of C<$/> is now changed for any other code | |
1177 | running inside the same Perl interpreter. | |
1178 | ||
1179 | Usually when a variable is localized you want to make sure that this | |
241a59d9 FC |
1180 | change affects the shortest scope possible. So unless you are already |
1181 | inside some short C<{}> block, you should create one yourself. For | |
b0c22438 | 1182 | example: |
1183 | ||
9548c15c FC |
1184 | my $content = ''; |
1185 | open my $fh, "<", "foo" or die $!; | |
1186 | { | |
1187 | local $/; | |
1188 | $content = <$fh>; | |
1189 | } | |
1190 | close $fh; | |
0462a1ab | 1191 | |
b0c22438 | 1192 | Here is an example of how your own code can go broken: |
0462a1ab | 1193 | |
9548c15c FC |
1194 | for ( 1..3 ){ |
1195 | $\ = "\r\n"; | |
1196 | nasty_break(); | |
1197 | print "$_"; | |
1198 | } | |
0b9346e6 | 1199 | |
9548c15c | 1200 | sub nasty_break { |
0b9346e6 | 1201 | $\ = "\f"; |
1202 | # do something with $_ | |
9548c15c | 1203 | } |
0462a1ab | 1204 | |
0b9346e6 | 1205 | You probably expect this code to print the equivalent of |
0462a1ab | 1206 | |
0b9346e6 | 1207 | "1\r\n2\r\n3\r\n" |
0462a1ab | 1208 | |
b0c22438 | 1209 | but instead you get: |
0462a1ab | 1210 | |
0b9346e6 | 1211 | "1\f2\f3\f" |
0462a1ab | 1212 | |
0b9346e6 | 1213 | Why? Because C<nasty_break()> modifies C<$\> without localizing it |
241a59d9 FC |
1214 | first. The value you set in C<nasty_break()> is still there when you |
1215 | return. The fix is to add C<local()> so the value doesn't leak out of | |
0b9346e6 | 1216 | C<nasty_break()>: |
6e2995f4 | 1217 | |
9548c15c | 1218 | local $\ = "\f"; |
a0d0e21e | 1219 | |
b0c22438 | 1220 | It's easy to notice the problem in such a short example, but in more |
1221 | complicated code you are looking for trouble if you don't localize | |
1222 | changes to the special variables. | |
a0d0e21e | 1223 | |
b0c22438 | 1224 | =over 8 |
a0d0e21e | 1225 | |
b0c22438 | 1226 | =item $ARGV |
1227 | X<$ARGV> | |
fb73857a | 1228 | |
ca1b95ae | 1229 | Contains the name of the current file when reading from C<< <> >>. |
b0c22438 | 1230 | |
1231 | =item @ARGV | |
1232 | X<@ARGV> | |
1233 | ||
ca1b95ae | 1234 | The array C<@ARGV> contains the command-line arguments intended for |
241a59d9 | 1235 | the script. C<$#ARGV> is generally the number of arguments minus |
b0c22438 | 1236 | one, because C<$ARGV[0]> is the first argument, I<not> the program's |
241a59d9 | 1237 | command name itself. See L</$0> for the command name. |
b0c22438 | 1238 | |
84dabc03 | 1239 | =item ARGV |
1240 | X<ARGV> | |
1241 | ||
1242 | The special filehandle that iterates over command-line filenames in | |
241a59d9 FC |
1243 | C<@ARGV>. Usually written as the null filehandle in the angle operator |
1244 | C<< <> >>. Note that currently C<ARGV> only has its magical effect | |
84dabc03 | 1245 | within the C<< <> >> operator; elsewhere it is just a plain filehandle |
241a59d9 | 1246 | corresponding to the last file opened by C<< <> >>. In particular, |
84dabc03 | 1247 | passing C<\*ARGV> as a parameter to a function that expects a filehandle |
1248 | may not cause your function to automatically read the contents of all the | |
1249 | files in C<@ARGV>. | |
1250 | ||
b0c22438 | 1251 | =item ARGVOUT |
1252 | X<ARGVOUT> | |
1253 | ||
1254 | The special filehandle that points to the currently open output file | |
241a59d9 FC |
1255 | when doing edit-in-place processing with B<-i>. Useful when you have |
1256 | to do a lot of inserting and don't want to keep modifying C<$_>. See | |
b0c22438 | 1257 | L<perlrun> for the B<-i> switch. |
1258 | ||
5b442a2a | 1259 | =item Handle->output_field_separator( EXPR ) |
84dabc03 | 1260 | |
1261 | =item $OUTPUT_FIELD_SEPARATOR | |
1262 | ||
1263 | =item $OFS | |
1264 | ||
1265 | =item $, | |
1266 | X<$,> X<$OFS> X<$OUTPUT_FIELD_SEPARATOR> | |
1267 | ||
241a59d9 FC |
1268 | The output field separator for the print operator. If defined, this |
1269 | value is printed between each of print's arguments. Default is C<undef>. | |
84dabc03 | 1270 | |
1271 | Mnemonic: what is printed when there is a "," in your print statement. | |
1272 | ||
5b442a2a | 1273 | =item HANDLE->input_line_number( EXPR ) |
b0c22438 | 1274 | |
1275 | =item $INPUT_LINE_NUMBER | |
1276 | ||
1277 | =item $NR | |
1278 | ||
1279 | =item $. | |
1280 | X<$.> X<$NR> X<$INPUT_LINE_NUMBER> X<line number> | |
1281 | ||
1282 | Current line number for the last filehandle accessed. | |
1283 | ||
1284 | Each filehandle in Perl counts the number of lines that have been read | |
241a59d9 | 1285 | from it. (Depending on the value of C<$/>, Perl's idea of what |
b0c22438 | 1286 | constitutes a line may not match yours.) When a line is read from a |
1287 | filehandle (via C<readline()> or C<< <> >>), or when C<tell()> or | |
1288 | C<seek()> is called on it, C<$.> becomes an alias to the line counter | |
1289 | for that filehandle. | |
1290 | ||
1291 | You can adjust the counter by assigning to C<$.>, but this will not | |
241a59d9 FC |
1292 | actually move the seek pointer. I<Localizing C<$.> will not localize |
1293 | the filehandle's line count>. Instead, it will localize perl's notion | |
b0c22438 | 1294 | of which filehandle C<$.> is currently aliased to. |
1295 | ||
1296 | C<$.> is reset when the filehandle is closed, but B<not> when an open | |
241a59d9 FC |
1297 | filehandle is reopened without an intervening C<close()>. For more |
1298 | details, see L<perlop/"IE<sol>O Operators">. Because C<< <> >> never does | |
b0c22438 | 1299 | an explicit close, line numbers increase across C<ARGV> files (but see |
1300 | examples in L<perlfunc/eof>). | |
1301 | ||
1302 | You can also use C<< HANDLE->input_line_number(EXPR) >> to access the | |
1303 | line counter for a given filehandle without having to worry about | |
1304 | which handle you last accessed. | |
1305 | ||
1306 | Mnemonic: many programs use "." to mean the current line number. | |
1307 | ||
5b442a2a | 1308 | =item HANDLE->input_record_separator( EXPR ) |
b0c22438 | 1309 | |
1310 | =item $INPUT_RECORD_SEPARATOR | |
1311 | ||
1312 | =item $RS | |
1313 | ||
1314 | =item $/ | |
1315 | X<$/> X<$RS> X<$INPUT_RECORD_SEPARATOR> | |
1316 | ||
241a59d9 FC |
1317 | The input record separator, newline by default. This influences Perl's |
1318 | idea of what a "line" is. Works like B<awk>'s RS variable, including | |
84dabc03 | 1319 | treating empty lines as a terminator if set to the null string (an |
241a59d9 | 1320 | empty line cannot contain any spaces or tabs). You may set it to a |
84dabc03 | 1321 | multi-character string to match a multi-character terminator, or to |
241a59d9 | 1322 | C<undef> to read through the end of file. Setting it to C<"\n\n"> |
84dabc03 | 1323 | means something slightly different than setting to C<"">, if the file |
241a59d9 FC |
1324 | contains consecutive empty lines. Setting to C<""> will treat two or |
1325 | more consecutive empty lines as a single empty line. Setting to | |
84dabc03 | 1326 | C<"\n\n"> will blindly assume that the next input character belongs to |
1327 | the next paragraph, even if it's a newline. | |
b0c22438 | 1328 | |
1329 | local $/; # enable "slurp" mode | |
1330 | local $_ = <FH>; # whole file now here | |
1331 | s/\n[ \t]+/ /g; | |
1332 | ||
241a59d9 | 1333 | Remember: the value of C<$/> is a string, not a regex. B<awk> has to |
b0c22438 | 1334 | be better for something. :-) |
1335 | ||
1336 | Setting C<$/> to a reference to an integer, scalar containing an | |
1337 | integer, or scalar that's convertible to an integer will attempt to | |
1338 | read records instead of lines, with the maximum record size being the | |
241a59d9 | 1339 | referenced integer. So this: |
b0c22438 | 1340 | |
1341 | local $/ = \32768; # or \"32768", or \$var_containing_32768 | |
1342 | open my $fh, "<", $myfile or die $!; | |
1343 | local $_ = <$fh>; | |
fb73857a | 1344 | |
ad9a4fca | 1345 | will read a record of no more than 32768 bytes from $fh. If you're |
b0c22438 | 1346 | not reading from a record-oriented file (or your OS doesn't have |
1347 | record-oriented files), then you'll likely get a full chunk of data | |
241a59d9 FC |
1348 | with every read. If a record is larger than the record size you've |
1349 | set, you'll get the record back in pieces. Trying to set the record | |
b0c22438 | 1350 | size to zero or less will cause reading in the (rest of the) whole file. |
6e2995f4 | 1351 | |
78c28381 CB |
1352 | On VMS only, record reads bypass PerlIO layers and any associated |
1353 | buffering,so you must not mix record and non-record reads on the | |
1354 | same filehandle. Record mode mixes with line mode only when the | |
1355 | same buffering layer is in use for both modes. | |
5c055ba3 | 1356 | |
7476a79c TC |
1357 | If you perform a record read on a FILE with an encoding layer such as |
1358 | C<:encoding(latin1)> or C<:utf8>, you may get an invalid string as a | |
1359 | result, may leave the FILE positioned between characters in the stream | |
1360 | and may not be reading the number of bytes from the underlying file | |
1361 | that you specified. This behaviour may change without warning in a | |
1362 | future version of perl. | |
1363 | ||
57f6eff5 | 1364 | See also L<perlport/"Newlines">. Also see L</$.>. |
9bf22702 | 1365 | |
b0c22438 | 1366 | Mnemonic: / delimits line boundaries when quoting poetry. |
5c055ba3 | 1367 | |
5b442a2a | 1368 | =item Handle->output_record_separator( EXPR ) |
84902520 | 1369 | |
b0c22438 | 1370 | =item $OUTPUT_RECORD_SEPARATOR |
84902520 | 1371 | |
b0c22438 | 1372 | =item $ORS |
84902520 | 1373 | |
b0c22438 | 1374 | =item $\ |
1375 | X<$\> X<$ORS> X<$OUTPUT_RECORD_SEPARATOR> | |
84902520 | 1376 | |
241a59d9 FC |
1377 | The output record separator for the print operator. If defined, this |
1378 | value is printed after the last of print's arguments. Default is C<undef>. | |
84902520 | 1379 | |
b0c22438 | 1380 | Mnemonic: you set C<$\> instead of adding "\n" at the end of the print. |
1381 | Also, it's just like C<$/>, but it's what you get "back" from Perl. | |
84902520 | 1382 | |
5b442a2a | 1383 | =item HANDLE->autoflush( EXPR ) |
1384 | ||
1385 | =item $OUTPUT_AUTOFLUSH | |
1386 | ||
84dabc03 | 1387 | =item $| |
1388 | X<$|> X<autoflush> X<flush> X<$OUTPUT_AUTOFLUSH> | |
84902520 | 1389 | |
84dabc03 | 1390 | If set to nonzero, forces a flush right away and after every write or |
241a59d9 | 1391 | print on the currently selected output channel. Default is 0 |
84dabc03 | 1392 | (regardless of whether the channel is really buffered by the system or |
1393 | not; C<$|> tells you only whether you've asked Perl explicitly to | |
241a59d9 FC |
1394 | flush after each write). STDOUT will typically be line buffered if |
1395 | output is to the terminal and block buffered otherwise. Setting this | |
84dabc03 | 1396 | variable is useful primarily when you are outputting to a pipe or |
1397 | socket, such as when you are running a Perl program under B<rsh> and | |
241a59d9 FC |
1398 | want to see the output as it's happening. This has no effect on input |
1399 | buffering. See L<perlfunc/getc> for that. See L<perlfunc/select> on | |
1400 | how to select the output channel. See also L<IO::Handle>. | |
84dabc03 | 1401 | |
1402 | Mnemonic: when you want your pipes to be piping hot. | |
1403 | ||
1404 | =back | |
84902520 | 1405 | |
b0c22438 | 1406 | =head3 Variables related to formats |
83ee9e09 | 1407 | |
b0c22438 | 1408 | The special variables for formats are a subset of those for |
241a59d9 | 1409 | filehandles. See L<perlform> for more information about Perl's |
69b55ccc | 1410 | formats. |
83ee9e09 | 1411 | |
b0c22438 | 1412 | =over 8 |
83ee9e09 | 1413 | |
84dabc03 | 1414 | =item $ACCUMULATOR |
1415 | ||
1416 | =item $^A | |
1417 | X<$^A> X<$ACCUMULATOR> | |
1418 | ||
1419 | The current value of the C<write()> accumulator for C<format()> lines. | |
1420 | A format contains C<formline()> calls that put their result into | |
241a59d9 FC |
1421 | C<$^A>. After calling its format, C<write()> prints out the contents |
1422 | of C<$^A> and empties. So you never really see the contents of C<$^A> | |
1423 | unless you call C<formline()> yourself and then look at it. See | |
96090e4f | 1424 | L<perlform> and L<perlfunc/"formline PICTURE,LIST">. |
84dabc03 | 1425 | |
5b442a2a | 1426 | =item HANDLE->format_formfeed(EXPR) |
1427 | ||
1428 | =item $FORMAT_FORMFEED | |
1429 | ||
84dabc03 | 1430 | =item $^L |
1431 | X<$^L> X<$FORMAT_FORMFEED> | |
1432 | ||
241a59d9 | 1433 | What formats output as a form feed. The default is C<\f>. |
84dabc03 | 1434 | |
b0c22438 | 1435 | =item HANDLE->format_page_number(EXPR) |
83ee9e09 | 1436 | |
b0c22438 | 1437 | =item $FORMAT_PAGE_NUMBER |
83ee9e09 | 1438 | |
b0c22438 | 1439 | =item $% |
1440 | X<$%> X<$FORMAT_PAGE_NUMBER> | |
83ee9e09 | 1441 | |
b0c22438 | 1442 | The current page number of the currently selected output channel. |
83ee9e09 | 1443 | |
b0c22438 | 1444 | Mnemonic: C<%> is page number in B<nroff>. |
7619c85e | 1445 | |
b0c22438 | 1446 | =item HANDLE->format_lines_left(EXPR) |
b9ac3b5b | 1447 | |
b0c22438 | 1448 | =item $FORMAT_LINES_LEFT |
66558a10 | 1449 | |
b0c22438 | 1450 | =item $- |
1451 | X<$-> X<$FORMAT_LINES_LEFT> | |
fb73857a | 1452 | |
b0c22438 | 1453 | The number of lines left on the page of the currently selected output |
1454 | channel. | |
fa05a9fd | 1455 | |
b0c22438 | 1456 | Mnemonic: lines_on_page - lines_printed. |
fa05a9fd | 1457 | |
84dabc03 | 1458 | =item Handle->format_line_break_characters EXPR |
fb73857a | 1459 | |
84dabc03 | 1460 | =item $FORMAT_LINE_BREAK_CHARACTERS |
a0d0e21e | 1461 | |
84dabc03 | 1462 | =item $: |
1463 | X<$:> X<FORMAT_LINE_BREAK_CHARACTERS> | |
a0d0e21e | 1464 | |
84dabc03 | 1465 | The current set of characters after which a string may be broken to |
241a59d9 | 1466 | fill continuation fields (starting with C<^>) in a format. The default is |
84dabc03 | 1467 | S<" \n-">, to break on a space, newline, or a hyphen. |
a0d0e21e | 1468 | |
84dabc03 | 1469 | Mnemonic: a "colon" in poetry is a part of a line. |
1470 | ||
1471 | =item HANDLE->format_lines_per_page(EXPR) | |
1472 | ||
1473 | =item $FORMAT_LINES_PER_PAGE | |
1474 | ||
1475 | =item $= | |
1476 | X<$=> X<$FORMAT_LINES_PER_PAGE> | |
1477 | ||
1478 | The current page length (printable lines) of the currently selected | |
241a59d9 | 1479 | output channel. The default is 60. |
84dabc03 | 1480 | |
1481 | Mnemonic: = has horizontal lines. | |
7c36658b | 1482 | |
b0c22438 | 1483 | =item HANDLE->format_top_name(EXPR) |
7c36658b | 1484 | |
b0c22438 | 1485 | =item $FORMAT_TOP_NAME |
a05d7ebb | 1486 | |
b0c22438 | 1487 | =item $^ |
1488 | X<$^> X<$FORMAT_TOP_NAME> | |
fde18df1 | 1489 | |
b0c22438 | 1490 | The name of the current top-of-page format for the currently selected |
241a59d9 FC |
1491 | output channel. The default is the name of the filehandle with C<_TOP> |
1492 | appended. For example, the default format top name for the C<STDOUT> | |
12abbafd | 1493 | filehandle is C<STDOUT_TOP>. |
e07ea26a | 1494 | |
b0c22438 | 1495 | Mnemonic: points to top of page. |
e07ea26a | 1496 | |
84dabc03 | 1497 | =item HANDLE->format_name(EXPR) |
16070b82 | 1498 | |
84dabc03 | 1499 | =item $FORMAT_NAME |
aa2f2a36 | 1500 | |
84dabc03 | 1501 | =item $~ |
1502 | X<$~> X<$FORMAT_NAME> | |
aa2f2a36 | 1503 | |
84dabc03 | 1504 | The name of the current report format for the currently selected |
241a59d9 FC |
1505 | output channel. The default format name is the same as the filehandle |
1506 | name. For example, the default format name for the C<STDOUT> | |
84dabc03 | 1507 | filehandle is just C<STDOUT>. |
16070b82 | 1508 | |
84dabc03 | 1509 | Mnemonic: brother to C<$^>. |
16070b82 | 1510 | |
b0c22438 | 1511 | =back |
a0d0e21e | 1512 | |
84dabc03 | 1513 | =head2 Error Variables |
b0c22438 | 1514 | X<error> X<exception> |
a0d0e21e | 1515 | |
b0c22438 | 1516 | The variables C<$@>, C<$!>, C<$^E>, and C<$?> contain information |
1517 | about different types of error conditions that may appear during | |
241a59d9 | 1518 | execution of a Perl program. The variables are shown ordered by |
b0c22438 | 1519 | the "distance" between the subsystem which reported the error and |
241a59d9 | 1520 | the Perl process. They correspond to errors detected by the Perl |
b0c22438 | 1521 | interpreter, C library, operating system, or an external program, |
1522 | respectively. | |
4438c4b7 | 1523 | |
b0c22438 | 1524 | To illustrate the differences between these variables, consider the |
241a59d9 | 1525 | following Perl expression, which uses a single-quoted string. After |
7fd683ff | 1526 | execution of this statement, perl may have set all four special error |
7333b1c4 | 1527 | variables: |
4438c4b7 | 1528 | |
9548c15c FC |
1529 | eval q{ |
1530 | open my $pipe, "/cdrom/install |" or die $!; | |
1531 | my @res = <$pipe>; | |
1532 | close $pipe or die "bad pipe: $?, $!"; | |
1533 | }; | |
a0d0e21e | 1534 | |
7333b1c4 | 1535 | When perl executes the C<eval()> expression, it translates the |
1536 | C<open()>, C<< <PIPE> >>, and C<close> calls in the C run-time library | |
241a59d9 | 1537 | and thence to the operating system kernel. perl sets C<$!> to |
7333b1c4 | 1538 | the C library's C<errno> if one of these calls fails. |
2a8c8378 | 1539 | |
84dabc03 | 1540 | C<$@> is set if the string to be C<eval>-ed did not compile (this may |
1541 | happen if C<open> or C<close> were imported with bad prototypes), or | |
241a59d9 | 1542 | if Perl code executed during evaluation C<die()>d. In these cases the |
0b9346e6 | 1543 | value of C<$@> is the compile error, or the argument to C<die> (which |
241a59d9 | 1544 | will interpolate C<$!> and C<$?>). (See also L<Fatal>, though.) |
2a8c8378 | 1545 | |
84dabc03 | 1546 | Under a few operating systems, C<$^E> may contain a more verbose error |
241a59d9 | 1547 | indicator, such as in this case, "CDROM tray not closed." Systems that |
84dabc03 | 1548 | do not support extended error messages leave C<$^E> the same as C<$!>. |
a0d0e21e | 1549 | |
b0c22438 | 1550 | Finally, C<$?> may be set to non-0 value if the external program |
241a59d9 | 1551 | F</cdrom/install> fails. The upper eight bits reflect specific error |
84dabc03 | 1552 | conditions encountered by the program (the program's C<exit()> value). |
1553 | The lower eight bits reflect mode of failure, like signal death and | |
241a59d9 | 1554 | core dump information. See L<wait(2)> for details. In contrast to |
84dabc03 | 1555 | C<$!> and C<$^E>, which are set only if error condition is detected, |
1556 | the variable C<$?> is set on each C<wait> or pipe C<close>, | |
241a59d9 | 1557 | overwriting the old value. This is more like C<$@>, which on every |
84dabc03 | 1558 | C<eval()> is always set on failure and cleared on success. |
a0d0e21e | 1559 | |
b0c22438 | 1560 | For more details, see the individual descriptions at C<$@>, C<$!>, |
1561 | C<$^E>, and C<$?>. | |
38e4f4ae | 1562 | |
0b9346e6 | 1563 | =over 8 |
1564 | ||
b0c22438 | 1565 | =item ${^CHILD_ERROR_NATIVE} |
1566 | X<$^CHILD_ERROR_NATIVE> | |
a0d0e21e | 1567 | |
b0c22438 | 1568 | The native status returned by the last pipe close, backtick (C<``>) |
1569 | command, successful call to C<wait()> or C<waitpid()>, or from the | |
241a59d9 | 1570 | C<system()> operator. On POSIX-like systems this value can be decoded |
b0c22438 | 1571 | with the WIFEXITED, WEXITSTATUS, WIFSIGNALED, WTERMSIG, WIFSTOPPED, |
1572 | WSTOPSIG and WIFCONTINUED functions provided by the L<POSIX> module. | |
a0d0e21e | 1573 | |
b0c22438 | 1574 | Under VMS this reflects the actual VMS exit status; i.e. it is the |
1575 | same as C<$?> when the pragma C<use vmsish 'status'> is in effect. | |
a0d0e21e | 1576 | |
60cf4914 | 1577 | This variable was added in Perl v5.10.0. |
a0d0e21e | 1578 | |
5b442a2a | 1579 | =item $EXTENDED_OS_ERROR |
1580 | ||
84dabc03 | 1581 | =item $^E |
1582 | X<$^E> X<$EXTENDED_OS_ERROR> | |
1583 | ||
241a59d9 | 1584 | Error information specific to the current operating system. At the |
84dabc03 | 1585 | moment, this differs from C<$!> under only VMS, OS/2, and Win32 (and |
241a59d9 | 1586 | for MacPerl). On all other platforms, C<$^E> is always just the same |
84dabc03 | 1587 | as C<$!>. |
1588 | ||
1589 | Under VMS, C<$^E> provides the VMS status value from the last system | |
241a59d9 FC |
1590 | error. This is more specific information about the last system error |
1591 | than that provided by C<$!>. This is particularly important when C<$!> | |
84dabc03 | 1592 | is set to B<EVMSERR>. |
1593 | ||
1594 | Under OS/2, C<$^E> is set to the error code of the last call to OS/2 | |
1595 | API either via CRT, or directly from perl. | |
1596 | ||
1597 | Under Win32, C<$^E> always returns the last error information reported | |
1598 | by the Win32 call C<GetLastError()> which describes the last error | |
241a59d9 FC |
1599 | from within the Win32 API. Most Win32-specific code will report errors |
1600 | via C<$^E>. ANSI C and Unix-like calls set C<errno> and so most | |
84dabc03 | 1601 | portable Perl code will report errors via C<$!>. |
1602 | ||
1603 | Caveats mentioned in the description of C<$!> generally apply to | |
1604 | C<$^E>, also. | |
1605 | ||
1606 | This variable was added in Perl 5.003. | |
1607 | ||
1608 | Mnemonic: Extra error explanation. | |
0b9346e6 | 1609 | |
84dabc03 | 1610 | =item $EXCEPTIONS_BEING_CAUGHT |
1611 | ||
1612 | =item $^S | |
1613 | X<$^S> X<$EXCEPTIONS_BEING_CAUGHT> | |
1614 | ||
1615 | Current state of the interpreter. | |
1616 | ||
ca1b95ae | 1617 | $^S State |
aa959a20 FC |
1618 | --------- ------------------------------------- |
1619 | undef Parsing module, eval, or main program | |
ca1b95ae | 1620 | true (1) Executing an eval |
1621 | false (0) Otherwise | |
84dabc03 | 1622 | |
1623 | The first state may happen in C<$SIG{__DIE__}> and C<$SIG{__WARN__}> | |
1624 | handlers. | |
1625 | ||
aa959a20 FC |
1626 | The English name $EXCEPTIONS_BEING_CAUGHT is slightly misleading, because |
1627 | the C<undef> value does not indicate whether exceptions are being caught, | |
1628 | since compilation of the main program does not catch exceptions. | |
1629 | ||
84dabc03 | 1630 | This variable was added in Perl 5.004. |
1631 | ||
1632 | =item $WARNING | |
1633 | ||
1634 | =item $^W | |
1635 | X<$^W> X<$WARNING> | |
1636 | ||
1637 | The current value of the warning switch, initially true if B<-w> was | |
1638 | used, false otherwise, but directly modifiable. | |
1639 | ||
1640 | See also L<warnings>. | |
1641 | ||
0b9346e6 | 1642 | Mnemonic: related to the B<-w> switch. |
84dabc03 | 1643 | |
1644 | =item ${^WARNING_BITS} | |
ca1b95ae | 1645 | X<${^WARNING_BITS}> |
84dabc03 | 1646 | |
1647 | The current set of warning checks enabled by the C<use warnings> pragma. | |
44567c86 FC |
1648 | It has the same scoping as the C<$^H> and C<%^H> variables. The exact |
1649 | values are considered internal to the L<warnings> pragma and may change | |
1650 | between versions of Perl. | |
84dabc03 | 1651 | |
60cf4914 | 1652 | This variable was added in Perl v5.6.0. |
84dabc03 | 1653 | |
b0c22438 | 1654 | =item $OS_ERROR |
5ccee41e | 1655 | |
b0c22438 | 1656 | =item $ERRNO |
5ccee41e | 1657 | |
b0c22438 | 1658 | =item $! |
1659 | X<$!> X<$ERRNO> X<$OS_ERROR> | |
9b0e6e7a | 1660 | |
a73bef78 JL |
1661 | When referenced, C<$!> retrieves the current value |
1662 | of the C C<errno> integer variable. | |
1663 | If C<$!> is assigned a numerical value, that value is stored in C<errno>. | |
1664 | When referenced as a string, C<$!> yields the system error string | |
1665 | corresponding to C<errno>. | |
1666 | ||
1667 | Many system or library calls set C<errno> if they fail, | |
1668 | to indicate the cause of failure. They usually do B<not> | |
1669 | set C<errno> to zero if they succeed. This means C<errno>, | |
1670 | hence C<$!>, is meaningful only I<immediately> after a B<failure>: | |
1671 | ||
1672 | if (open my $fh, "<", $filename) { | |
ca1b95ae | 1673 | # Here $! is meaningless. |
1674 | ... | |
7fd683ff | 1675 | } |
ca1b95ae | 1676 | else { |
1677 | # ONLY here is $! meaningful. | |
1678 | ... | |
1679 | # Already here $! might be meaningless. | |
b0c22438 | 1680 | } |
1681 | # Since here we might have either success or failure, | |
a73bef78 | 1682 | # $! is meaningless. |
a0d0e21e | 1683 | |
a73bef78 JL |
1684 | Here, I<meaningless> means that C<$!> may be unrelated to the outcome |
1685 | of the C<open()> operator. Assignment to C<$!> is similarly ephemeral. | |
1686 | It can be used immediately before invoking the C<die()> operator, | |
1687 | to set the exit value, or to inspect the system error string | |
1688 | corresponding to error I<n>, or to restore C<$!> to a meaningful state. | |
d54b56d5 | 1689 | |
b0c22438 | 1690 | Mnemonic: What just went bang? |
314d39ce | 1691 | |
b0c22438 | 1692 | =item %OS_ERROR |
fb73857a | 1693 | |
b0c22438 | 1694 | =item %ERRNO |
fb73857a | 1695 | |
b0c22438 | 1696 | =item %! |
5b442a2a | 1697 | X<%!> X<%OS_ERROR> X<%ERRNO> |
a0d0e21e | 1698 | |
b0c22438 | 1699 | Each element of C<%!> has a true value only if C<$!> is set to that |
241a59d9 | 1700 | value. For example, C<$!{ENOENT}> is true if and only if the current |
84dabc03 | 1701 | value of C<$!> is C<ENOENT>; that is, if the most recent error was "No |
1702 | such file or directory" (or its moral equivalent: not all operating | |
241a59d9 | 1703 | systems give that exact error, and certainly not all languages). To |
84dabc03 | 1704 | check if a particular key is meaningful on your system, use C<exists |
241a59d9 | 1705 | $!{the_key}>; for a list of legal keys, use C<keys %!>. See L<Errno> |
7333b1c4 | 1706 | for more information, and also see L</$!>. |
a0d0e21e | 1707 | |
b0c22438 | 1708 | This variable was added in Perl 5.005. |
44f0be63 | 1709 | |
84dabc03 | 1710 | =item $CHILD_ERROR |
b687b08b | 1711 | |
84dabc03 | 1712 | =item $? |
1713 | X<$?> X<$CHILD_ERROR> | |
a0d0e21e | 1714 | |
84dabc03 | 1715 | The status returned by the last pipe close, backtick (C<``>) command, |
1716 | successful call to C<wait()> or C<waitpid()>, or from the C<system()> | |
241a59d9 | 1717 | operator. This is just the 16-bit status word returned by the |
84dabc03 | 1718 | traditional Unix C<wait()> system call (or else is made up to look |
241a59d9 | 1719 | like it). Thus, the exit value of the subprocess is really (C<<< $? >> |
84dabc03 | 1720 | 8 >>>), and C<$? & 127> gives which signal, if any, the process died |
1721 | from, and C<$? & 128> reports whether there was a core dump. | |
a0d0e21e | 1722 | |
84dabc03 | 1723 | Additionally, if the C<h_errno> variable is supported in C, its value |
1724 | is returned via C<$?> if any C<gethost*()> function fails. | |
b687b08b | 1725 | |
84dabc03 | 1726 | If you have installed a signal handler for C<SIGCHLD>, the |
1727 | value of C<$?> will usually be wrong outside that handler. | |
a0d0e21e | 1728 | |
84dabc03 | 1729 | Inside an C<END> subroutine C<$?> contains the value that is going to be |
241a59d9 FC |
1730 | given to C<exit()>. You can modify C<$?> in an C<END> subroutine to |
1731 | change the exit status of your program. For example: | |
a0d0e21e | 1732 | |
84dabc03 | 1733 | END { |
1734 | $? = 1 if $? == 255; # die would make it 255 | |
1735 | } | |
a0d0e21e | 1736 | |
84dabc03 | 1737 | Under VMS, the pragma C<use vmsish 'status'> makes C<$?> reflect the |
1738 | actual VMS exit status, instead of the default emulation of POSIX | |
1739 | status; see L<perlvms/$?> for details. | |
1740 | ||
1741 | Mnemonic: similar to B<sh> and B<ksh>. | |
a0d0e21e | 1742 | |
b0c22438 | 1743 | =item $EVAL_ERROR |
f648820c | 1744 | |
b0c22438 | 1745 | =item $@ |
1746 | X<$@> X<$EVAL_ERROR> | |
a0d0e21e | 1747 | |
241a59d9 FC |
1748 | The Perl syntax error message from the |
1749 | last C<eval()> operator. If C<$@> is | |
0b9346e6 | 1750 | the null string, the last C<eval()> parsed and executed correctly |
b0c22438 | 1751 | (although the operations you invoked may have failed in the normal |
1752 | fashion). | |
a0d0e21e | 1753 | |
241a59d9 | 1754 | Warning messages are not collected in this variable. You can, however, |
b0c22438 | 1755 | set up a routine to process warnings by setting C<$SIG{__WARN__}> as |
7333b1c4 | 1756 | described in L</%SIG>. |
748a9306 | 1757 | |
b0c22438 | 1758 | Mnemonic: Where was the syntax error "at"? |
7f315d2e | 1759 | |
b0c22438 | 1760 | =back |
7f315d2e | 1761 | |
1fa81471 DR |
1762 | =head2 Variables related to the interpreter state |
1763 | ||
1764 | These variables provide information about the current interpreter state. | |
1765 | ||
1766 | =over 8 | |
1767 | ||
1768 | =item $COMPILING | |
1769 | ||
1770 | =item $^C | |
1771 | X<$^C> X<$COMPILING> | |
1772 | ||
1773 | The current value of the flag associated with the B<-c> switch. | |
1774 | Mainly of use with B<-MO=...> to allow code to alter its behavior | |
1775 | when being compiled, such as for example to C<AUTOLOAD> at compile | |
241a59d9 | 1776 | time rather than normal, deferred loading. Setting |
1fa81471 DR |
1777 | C<$^C = 1> is similar to calling C<B::minus_c>. |
1778 | ||
60cf4914 | 1779 | This variable was added in Perl v5.6.0. |
1fa81471 DR |
1780 | |
1781 | =item $DEBUGGING | |
1782 | ||
1783 | =item $^D | |
1784 | X<$^D> X<$DEBUGGING> | |
1785 | ||
241a59d9 | 1786 | The current value of the debugging flags. May be read or set. Like its |
1fa81471 DR |
1787 | command-line equivalent, you can use numeric or symbolic values, eg |
1788 | C<$^D = 10> or C<$^D = "st">. | |
1789 | ||
1790 | Mnemonic: value of B<-D> switch. | |
1791 | ||
1792 | =item ${^ENCODING} | |
1793 | X<${^ENCODING}> | |
1794 | ||
1795 | The I<object reference> to the C<Encode> object that is used to convert | |
241a59d9 FC |
1796 | the source code to Unicode. Thanks to this variable your Perl script |
1797 | does not have to be written in UTF-8. Default is I<undef>. The direct | |
1fa81471 DR |
1798 | manipulation of this variable is highly discouraged. |
1799 | ||
1800 | This variable was added in Perl 5.8.2. | |
1801 | ||
1802 | =item ${^GLOBAL_PHASE} | |
1803 | X<${^GLOBAL_PHASE}> | |
1804 | ||
1805 | The current phase of the perl interpreter. | |
1806 | ||
1807 | Possible values are: | |
1808 | ||
1809 | =over 8 | |
1810 | ||
1811 | =item CONSTRUCT | |
1812 | ||
241a59d9 | 1813 | The C<PerlInterpreter*> is being constructed via C<perl_construct>. This |
1fa81471 | 1814 | value is mostly there for completeness and for use via the |
241a59d9 | 1815 | underlying C variable C<PL_phase>. It's not really possible for Perl |
1fa81471 DR |
1816 | code to be executed unless construction of the interpreter is |
1817 | finished. | |
1818 | ||
1819 | =item START | |
1820 | ||
241a59d9 | 1821 | This is the global compile-time. That includes, basically, every |
1fa81471 DR |
1822 | C<BEGIN> block executed directly or indirectly from during the |
1823 | compile-time of the top-level program. | |
1824 | ||
1825 | This phase is not called "BEGIN" to avoid confusion with | |
1826 | C<BEGIN>-blocks, as those are executed during compile-time of any | |
241a59d9 | 1827 | compilation unit, not just the top-level program. A new, localised |
1fa81471 DR |
1828 | compile-time entered at run-time, for example by constructs as |
1829 | C<eval "use SomeModule"> are not global interpreter phases, and | |
1830 | therefore aren't reflected by C<${^GLOBAL_PHASE}>. | |
1831 | ||
1832 | =item CHECK | |
1833 | ||
1834 | Execution of any C<CHECK> blocks. | |
1835 | ||
1836 | =item INIT | |
1837 | ||
1838 | Similar to "CHECK", but for C<INIT>-blocks, not C<CHECK> blocks. | |
1839 | ||
1840 | =item RUN | |
1841 | ||
1842 | The main run-time, i.e. the execution of C<PL_main_root>. | |
1843 | ||
1844 | =item END | |
1845 | ||
1846 | Execution of any C<END> blocks. | |
1847 | ||
1848 | =item DESTRUCT | |
1849 | ||
1850 | Global destruction. | |
1851 | ||
1852 | =back | |
1853 | ||
241a59d9 | 1854 | Also note that there's no value for UNITCHECK-blocks. That's because |
1fa81471 DR |
1855 | those are run for each compilation unit individually, and therefore is |
1856 | not a global interpreter phase. | |
1857 | ||
1858 | Not every program has to go through each of the possible phases, but | |
1859 | transition from one phase to another can only happen in the order | |
1860 | described in the above list. | |
1861 | ||
1862 | An example of all of the phases Perl code can see: | |
1863 | ||
1864 | BEGIN { print "compile-time: ${^GLOBAL_PHASE}\n" } | |
1865 | ||
1866 | INIT { print "init-time: ${^GLOBAL_PHASE}\n" } | |
1867 | ||
1868 | CHECK { print "check-time: ${^GLOBAL_PHASE}\n" } | |
1869 | ||
1870 | { | |
1871 | package Print::Phase; | |
1872 | ||
1873 | sub new { | |
1874 | my ($class, $time) = @_; | |
1875 | return bless \$time, $class; | |
1876 | } | |
1877 | ||
1878 | sub DESTROY { | |
1879 | my $self = shift; | |
1880 | print "$$self: ${^GLOBAL_PHASE}\n"; | |
1881 | } | |
1882 | } | |
1883 | ||
1884 | print "run-time: ${^GLOBAL_PHASE}\n"; | |
1885 | ||
1886 | my $runtime = Print::Phase->new( | |
1887 | "lexical variables are garbage collected before END" | |
1888 | ); | |
1889 | ||
1890 | END { print "end-time: ${^GLOBAL_PHASE}\n" } | |
1891 | ||
1892 | our $destruct = Print::Phase->new( | |
1893 | "package variables are garbage collected after END" | |
1894 | ); | |
1895 | ||
1896 | This will print out | |
1897 | ||
1898 | compile-time: START | |
1899 | check-time: CHECK | |
1900 | init-time: INIT | |
1901 | run-time: RUN | |
1902 | lexical variables are garbage collected before END: RUN | |
1903 | end-time: END | |
1904 | package variables are garbage collected after END: DESTRUCT | |
1905 | ||
1906 | This variable was added in Perl 5.14.0. | |
1907 | ||
1908 | =item $^H | |
1909 | X<$^H> | |
1910 | ||
241a59d9 FC |
1911 | WARNING: This variable is strictly for |
1912 | internal use only. Its availability, | |
1fa81471 DR |
1913 | behavior, and contents are subject to change without notice. |
1914 | ||
241a59d9 | 1915 | This variable contains compile-time hints for the Perl interpreter. At the |
1fa81471 DR |
1916 | end of compilation of a BLOCK the value of this variable is restored to the |
1917 | value when the interpreter started to compile the BLOCK. | |
1918 | ||
1919 | When perl begins to parse any block construct that provides a lexical scope | |
1920 | (e.g., eval body, required file, subroutine body, loop body, or conditional | |
1921 | block), the existing value of C<$^H> is saved, but its value is left unchanged. | |
1922 | When the compilation of the block is completed, it regains the saved value. | |
1923 | Between the points where its value is saved and restored, code that | |
1924 | executes within BEGIN blocks is free to change the value of C<$^H>. | |
1925 | ||
1926 | This behavior provides the semantic of lexical scoping, and is used in, | |
1927 | for instance, the C<use strict> pragma. | |
1928 | ||
1929 | The contents should be an integer; different bits of it are used for | |
241a59d9 | 1930 | different pragmatic flags. Here's an example: |
1fa81471 | 1931 | |
9548c15c | 1932 | sub add_100 { $^H |= 0x100 } |
1fa81471 | 1933 | |
9548c15c FC |
1934 | sub foo { |
1935 | BEGIN { add_100() } | |
1936 | bar->baz($boon); | |
1937 | } | |
1fa81471 | 1938 | |
241a59d9 | 1939 | Consider what happens during execution of the BEGIN block. At this point |
1fa81471 | 1940 | the BEGIN block has already been compiled, but the body of C<foo()> is still |
241a59d9 FC |
1941 | being compiled. The new value of C<$^H> |
1942 | will therefore be visible only while | |
1fa81471 DR |
1943 | the body of C<foo()> is being compiled. |
1944 | ||
1945 | Substitution of C<BEGIN { add_100() }> block with: | |
1946 | ||
9548c15c | 1947 | BEGIN { require strict; strict->import('vars') } |
1fa81471 | 1948 | |
241a59d9 | 1949 | demonstrates how C<use strict 'vars'> is implemented. Here's a conditional |
1fa81471 DR |
1950 | version of the same lexical pragma: |
1951 | ||
9548c15c FC |
1952 | BEGIN { |
1953 | require strict; strict->import('vars') if $condition | |
1954 | } | |
1fa81471 DR |
1955 | |
1956 | This variable was added in Perl 5.003. | |
1957 | ||
1958 | =item %^H | |
1959 | X<%^H> | |
1960 | ||
241a59d9 FC |
1961 | The C<%^H> hash provides the same scoping semantic as C<$^H>. This makes |
1962 | it useful for implementation of lexically scoped pragmas. See | |
1963 | L<perlpragma>. | |
1fa81471 DR |
1964 | |
1965 | When putting items into C<%^H>, in order to avoid conflicting with other | |
1966 | users of the hash there is a convention regarding which keys to use. | |
1967 | A module should use only keys that begin with the module's name (the | |
1968 | name of its main package) and a "/" character. For example, a module | |
1969 | C<Foo::Bar> should use keys such as C<Foo::Bar/baz>. | |
1970 | ||
60cf4914 | 1971 | This variable was added in Perl v5.6.0. |
1fa81471 DR |
1972 | |
1973 | =item ${^OPEN} | |
1974 | X<${^OPEN}> | |
1975 | ||
241a59d9 | 1976 | An internal variable used by PerlIO. A string in two parts, separated |
1fa81471 DR |
1977 | by a C<\0> byte, the first part describes the input layers, the second |
1978 | part describes the output layers. | |
1979 | ||
60cf4914 | 1980 | This variable was added in Perl v5.8.0. |
1fa81471 DR |
1981 | |
1982 | =item $PERLDB | |
1983 | ||
1984 | =item $^P | |
1985 | X<$^P> X<$PERLDB> | |
1986 | ||
241a59d9 | 1987 | The internal variable for debugging support. The meanings of the |
1fa81471 DR |
1988 | various bits are subject to change, but currently indicate: |
1989 | ||
1990 | =over 6 | |
1991 | ||
1992 | =item 0x01 | |
1993 | ||
1994 | Debug subroutine enter/exit. | |
1995 | ||
1996 | =item 0x02 | |
1997 | ||
241a59d9 FC |
1998 | Line-by-line debugging. Causes C<DB::DB()> subroutine to be called for |
1999 | each statement executed. Also causes saving source code lines (like | |
2000 | 0x400). | |
1fa81471 DR |
2001 | |
2002 | =item 0x04 | |
2003 | ||
2004 | Switch off optimizations. | |
2005 | ||
2006 | =item 0x08 | |
2007 | ||
2008 | Preserve more data for future interactive inspections. | |
2009 | ||
2010 | =item 0x10 | |
2011 | ||
2012 | Keep info about source lines on which a subroutine is defined. | |
2013 | ||
2014 | =item 0x20 | |
2015 | ||
2016 | Start with single-step on. | |
2017 | ||
2018 | =item 0x40 | |
2019 | ||
2020 | Use subroutine address instead of name when reporting. | |
2021 | ||
2022 | =item 0x80 | |
2023 | ||
2024 | Report C<goto &subroutine> as well. | |
2025 | ||
2026 | =item 0x100 | |
2027 | ||
2028 | Provide informative "file" names for evals based on the place they were compiled. | |
2029 | ||
2030 | =item 0x200 | |
2031 | ||
2032 | Provide informative names to anonymous subroutines based on the place they | |
2033 | were compiled. | |
2034 | ||
2035 | =item 0x400 | |
2036 | ||
2037 | Save source code lines into C<@{"_<$filename"}>. | |
2038 | ||
2039 | =back | |
2040 | ||
2041 | Some bits may be relevant at compile-time only, some at | |
241a59d9 | 2042 | run-time only. This is a new mechanism and the details may change. |
1fa81471 DR |
2043 | See also L<perldebguts>. |
2044 | ||
2045 | =item ${^TAINT} | |
2046 | X<${^TAINT}> | |
2047 | ||
241a59d9 | 2048 | Reflects if taint mode is on or off. 1 for on (the program was run with |
1fa81471 DR |
2049 | B<-T>), 0 for off, -1 when only taint warnings are enabled (i.e. with |
2050 | B<-t> or B<-TU>). | |
2051 | ||
2052 | This variable is read-only. | |
2053 | ||
60cf4914 | 2054 | This variable was added in Perl v5.8.0. |
1fa81471 DR |
2055 | |
2056 | =item ${^UNICODE} | |
2057 | X<${^UNICODE}> | |
2058 | ||
241a59d9 | 2059 | Reflects certain Unicode settings of Perl. See L<perlrun> |
1fa81471 DR |
2060 | documentation for the C<-C> switch for more information about |
2061 | the possible values. | |
2062 | ||
2063 | This variable is set during Perl startup and is thereafter read-only. | |
2064 | ||
60cf4914 | 2065 | This variable was added in Perl v5.8.2. |
1fa81471 DR |
2066 | |
2067 | =item ${^UTF8CACHE} | |
2068 | X<${^UTF8CACHE}> | |
2069 | ||
2070 | This variable controls the state of the internal UTF-8 offset caching code. | |
2071 | 1 for on (the default), 0 for off, -1 to debug the caching code by checking | |
2072 | all its results against linear scans, and panicking on any discrepancy. | |
2073 | ||
60cf4914 | 2074 | This variable was added in Perl v5.8.9. |
1fa81471 DR |
2075 | |
2076 | =item ${^UTF8LOCALE} | |
2077 | X<${^UTF8LOCALE}> | |
2078 | ||
2079 | This variable indicates whether a UTF-8 locale was detected by perl at | |
241a59d9 | 2080 | startup. This information is used by perl when it's in |
1fa81471 DR |
2081 | adjust-utf8ness-to-locale mode (as when run with the C<-CL> command-line |
2082 | switch); see L<perlrun> for more info on this. | |
2083 | ||
60cf4914 | 2084 | This variable was added in Perl v5.8.8. |
1fa81471 DR |
2085 | |
2086 | =back | |
2087 | ||
b0c22438 | 2088 | =head2 Deprecated and removed variables |
7f315d2e | 2089 | |
0b9346e6 | 2090 | Deprecating a variable announces the intent of the perl maintainers to |
241a59d9 FC |
2091 | eventually remove the variable from the language. It may still be |
2092 | available despite its status. Using a deprecated variable triggers | |
b0c22438 | 2093 | a warning. |
7f315d2e | 2094 | |
84dabc03 | 2095 | Once a variable is removed, its use triggers an error telling you |
b0c22438 | 2096 | the variable is unsupported. |
7f315d2e | 2097 | |
84dabc03 | 2098 | See L<perldiag> for details about error messages. |
7f315d2e | 2099 | |
b0c22438 | 2100 | =over 8 |
7f315d2e | 2101 | |
5b442a2a | 2102 | =item $OFMT |
2103 | ||
84dabc03 | 2104 | =item $# |
5b442a2a | 2105 | X<$#> X<$OFMT> |
84dabc03 | 2106 | |
38e5787b | 2107 | C<$#> was a variable that could be used to format printed numbers. |
60cf4914 | 2108 | After a deprecation cycle, its magic was removed in Perl v5.10.0 and |
84dabc03 | 2109 | using it now triggers a warning: C<$# is no longer supported>. |
2110 | ||
2111 | This is not the sigil you use in front of an array name to get the | |
241a59d9 FC |
2112 | last index, like C<$#array>. That's still how you get the last index |
2113 | of an array in Perl. The two have nothing to do with each other. | |
84dabc03 | 2114 | |
2115 | Deprecated in Perl 5. | |
2116 | ||
60cf4914 | 2117 | Removed in Perl v5.10.0. |
84dabc03 | 2118 | |
7f315d2e CO |
2119 | =item $* |
2120 | X<$*> | |
2121 | ||
84dabc03 | 2122 | C<$*> was a variable that you could use to enable multiline matching. |
60cf4914 | 2123 | After a deprecation cycle, its magic was removed in Perl v5.10.0. |
7f315d2e | 2124 | Using it now triggers a warning: C<$* is no longer supported>. |
84dabc03 | 2125 | You should use the C</s> and C</m> regexp modifiers instead. |
7f315d2e | 2126 | |
b0c22438 | 2127 | Deprecated in Perl 5. |
7f315d2e | 2128 | |
60cf4914 | 2129 | Removed in Perl v5.10.0. |
7f315d2e | 2130 | |
5b442a2a | 2131 | =item $ARRAY_BASE |
2132 | ||
84dabc03 | 2133 | =item $[ |
5b442a2a | 2134 | X<$[> X<$ARRAY_BASE> |
84dabc03 | 2135 | |
b82b06b8 FC |
2136 | This variable stores the index of the first element in an array, and |
2137 | of the first character in a substring. The default is 0, but you could | |
2138 | theoretically set it to 1 to make Perl behave more like B<awk> (or Fortran) | |
2139 | when subscripting and when evaluating the index() and substr() functions. | |
84dabc03 | 2140 | |
b82b06b8 FC |
2141 | As of release 5 of Perl, assignment to C<$[> is treated as a compiler |
2142 | directive, and cannot influence the behavior of any other file. | |
2143 | (That's why you can only assign compile-time constants to it.) | |
2144 | Its use is highly discouraged. | |
2145 | ||
60cf4914 | 2146 | Prior to Perl v5.10.0, assignment to C<$[> could be seen from outer lexical |
b82b06b8 FC |
2147 | scopes in the same file, unlike other compile-time directives (such as |
2148 | L<strict>). Using local() on it would bind its value strictly to a lexical | |
2149 | block. Now it is always lexically scoped. | |
2150 | ||
60cf4914 | 2151 | As of Perl v5.16.0, it is implemented by the L<arybase> module. See |
b82b06b8 | 2152 | L<arybase> for more details on its behaviour. |
84dabc03 | 2153 | |
6b54f8ab FC |
2154 | Under C<use v5.16>, or C<no feature "array_base">, C<$[> no longer has any |
2155 | effect, and always contains 0. Assigning 0 to it is permitted, but any | |
2156 | other value will produce an error. | |
2157 | ||
b82b06b8 FC |
2158 | Mnemonic: [ begins subscripts. |
2159 | ||
60cf4914 | 2160 | Deprecated in Perl v5.12.0. |
e1dccc0d | 2161 | |
5b442a2a | 2162 | =item $OLD_PERL_VERSION |
2163 | ||
b0c22438 | 2164 | =item $] |
5b442a2a | 2165 | X<$]> X<$OLD_PERL_VERSION> |
55602bd2 | 2166 | |
57f6eff5 | 2167 | See L</$^V> for a more modern representation of the Perl version that allows |
d4ba9bf2 | 2168 | accurate string comparisons. |
2169 | ||
241a59d9 | 2170 | The version + patchlevel / 1000 of the Perl interpreter. This variable |
b0c22438 | 2171 | can be used to determine whether the Perl interpreter executing a |
2172 | script is in the right range of versions: | |
55602bd2 | 2173 | |
b0c22438 | 2174 | warn "No checksumming!\n" if $] < 3.019; |
55602bd2 | 2175 | |
d4ba9bf2 | 2176 | The floating point representation can sometimes lead to inaccurate |
2177 | numeric comparisons. | |
2178 | ||
b0c22438 | 2179 | See also the documentation of C<use VERSION> and C<require VERSION> |
2180 | for a convenient way to fail if the running Perl interpreter is too old. | |
55602bd2 | 2181 | |
b0c22438 | 2182 | Mnemonic: Is this version of perl in the right bracket? |
19799a22 | 2183 | |
b0c22438 | 2184 | =back |
2b92dfce | 2185 | |
0b9346e6 | 2186 | =cut |