This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
Update EPOC libdir names.
[perl5.git] / epoc / config.h
CommitLineData
4d2c4e07
OF
1/* This file (config_H) is a sample config.h file. If you are unable
2 to successfully run Configure, copy this file to config.h and
3 edit it to suit your system.
4*/
5/*
6 * This file was produced by running the config_h.SH script, which
7 * gets its values from config.sh, which is generally produced by
8 * running Configure.
9 *
10 * Feel free to modify any of this as the need arises. Note, however,
11 * that running config_h.SH again will wipe out any changes you've made.
12 * For a more permanent change edit config.sh and rerun config_h.SH.
13 *
14 * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
15 */
16
17/*
18 * Package name : perl5
19 * Source directory : .
20 * Configuration time: Sat May 22 00:43:12 EET DST 1999
21 * Configured by : jhi
22 * Target system : osf1 alpha.hut.fi v4.0 878 alpha
23 */
24
25#ifndef _config_h_
26#define _config_h_
27
28#define EPOC 1
29#define PERL_CORE 1
30
31/* LOC_SED:
32 * This symbol holds the complete pathname to the sed program.
33 */
34/* #define LOC_SED "/usr/bin/sed" /**/
35
36/* BIN:
37 * This symbol holds the path of the bin directory where the package will
38 * be installed. Program must be prepared to deal with ~name substitution.
39 */
40/* BIN_EXP:
41 * This symbol is the filename expanded version of the BIN symbol, for
42 * programs that do not want to deal with that at run-time.
43 */
44#define BIN "/perl" /**/
45#define BIN_EXP "/perl" /**/
46
47/* HAS_ALARM:
48 * This symbol, if defined, indicates that the alarm routine is
49 * available.
50 */
51/* #define HAS_ALARM /**/
52
53/* HASATTRIBUTE:
54 * This symbol indicates the C compiler can check for function attributes,
55 * such as printf formats. This is normally only supported by GNU cc.
56 */
57#ifdef __MARM__
58#define HASATTRIBUTE / **/
59#endif
60#ifndef HASATTRIBUTE
61#define __attribute__(_arg_)
62#endif
63
64/* HAS_BCMP:
65 * This symbol is defined if the bcmp() routine is available to
66 * compare blocks of memory.
67 */
68#define HAS_BCMP /**/
69
70/* HAS_BCOPY:
71 * This symbol is defined if the bcopy() routine is available to
72 * copy blocks of memory.
73 */
74#define HAS_BCOPY /**/
75
76/* HAS_BZERO:
77 * This symbol is defined if the bzero() routine is available to
78 * set a memory block to 0.
79 */
80#define HAS_BZERO /**/
81
82/* HAS_CHOWN:
83 * This symbol, if defined, indicates that the chown routine is
84 * available.
85 */
86/*#define HAS_CHOWN /**/
87
88/* HAS_CHROOT:
89 * This symbol, if defined, indicates that the chroot routine is
90 * available.
91 */
92/*#define HAS_CHROOT /**/
93
94/* HAS_CHSIZE:
95 * This symbol, if defined, indicates that the chsize routine is available
96 * to truncate files. You might need a -lx to get this routine.
97 */
98/*#define HAS_CHSIZE / **/
99
100/* HASCONST:
101 * This symbol, if defined, indicates that this C compiler knows about
102 * the const type. There is no need to actually test for that symbol
103 * within your programs. The mere use of the "const" keyword will
104 * trigger the necessary tests.
105 */
106#define HASCONST /**/
107#ifndef HASCONST
108#define const
109#endif
110
111/* HAS_CRYPT:
112 * This symbol, if defined, indicates that the crypt routine is available
113 * to encrypt passwords and the like.
114 */
115/*#define HAS_CRYPT /**/
116
117/* HAS_CUSERID:
118 * This symbol, if defined, indicates that the cuserid routine is
119 * available to get character login names.
120 */
121/*#define HAS_CUSERID /**/
122
123/* HAS_DBL_DIG:
124 * This symbol, if defined, indicates that this system's <float.h>
125 * or <limits.h> defines the symbol DBL_DIG, which is the number
126 * of significant digits in a double precision number. If this
127 * symbol is not defined, a guess of 15 is usually pretty good.
128 */
129/*#define HAS_DBL_DIG /* */
130
131/* HAS_DIFFTIME:
132 * This symbol, if defined, indicates that the difftime routine is
133 * available.
134 */
135#define HAS_DIFFTIME /**/
136
137/* HAS_DLERROR:
138 * This symbol, if defined, indicates that the dlerror routine is
139 * available to return a string describing the last error that
140 * occurred from a call to dlopen(), dlclose() or dlsym().
141 */
142/*#define HAS_DLERROR /**/
143
144/* SETUID_SCRIPTS_ARE_SECURE_NOW:
145 * This symbol, if defined, indicates that the bug that prevents
146 * setuid scripts from being secure is not present in this kernel.
147 */
148/* DOSUID:
149 * This symbol, if defined, indicates that the C program should
150 * check the script that it is executing for setuid/setgid bits, and
151 * attempt to emulate setuid/setgid on systems that have disabled
152 * setuid #! scripts because the kernel can't do it securely.
153 * It is up to the package designer to make sure that this emulation
154 * is done securely. Among other things, it should do an fstat on
155 * the script it just opened to make sure it really is a setuid/setgid
156 * script, it should make sure the arguments passed correspond exactly
157 * to the argument on the #! line, and it should not trust any
158 * subprocesses to which it must pass the filename rather than the
159 * file descriptor of the script to be executed.
160 */
161/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
162/*#define DOSUID / **/
163
164/* HAS_DUP2:
165 * This symbol, if defined, indicates that the dup2 routine is
166 * available to duplicate file descriptors.
167 */
168/*#define HAS_DUP2 /**/
169
170/* HAS_FCHMOD:
171 * This symbol, if defined, indicates that the fchmod routine is available
172 * to change mode of opened files. If unavailable, use chmod().
173 */
174/*#define HAS_FCHMOD /**/
175
176/* HAS_FCHOWN:
177 * This symbol, if defined, indicates that the fchown routine is available
178 * to change ownership of opened files. If unavailable, use chown().
179 */
180/*#define HAS_FCHOWN /**/
181
182/* HAS_FCNTL:
183 * This symbol, if defined, indicates to the C program that
184 * the fcntl() function exists.
185 */
186/*#define HAS_FCNTL /**/
187
188/* HAS_FGETPOS:
189 * This symbol, if defined, indicates that the fgetpos routine is
190 * available to get the file position indicator, similar to ftell().
191 */
192#define HAS_FGETPOS /**/
193
194/* FLEXFILENAMES:
195 * This symbol, if defined, indicates that the system supports filenames
196 * longer than 14 characters.
197 */
198#define FLEXFILENAMES /**/
199
200/* HAS_FLOCK:
201 * This symbol, if defined, indicates that the flock routine is
202 * available to do file locking.
203 */
204/*#define HAS_FLOCK /**/
205
206/* HAS_FORK:
207 * This symbol, if defined, indicates that the fork routine is
208 * available.
209 */
210/*#define HAS_FORK /**/
211
212/* HAS_FSETPOS:
213 * This symbol, if defined, indicates that the fsetpos routine is
214 * available to set the file position indicator, similar to fseek().
215 */
216#define HAS_FSETPOS /**/
217
218/* HAS_GETTIMEOFDAY:
219 * This symbol, if defined, indicates that the gettimeofday() system
220 * call is available for a sub-second accuracy clock. Usually, the file
221 * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
222 * The type "Timeval" should be used to refer to "struct timeval".
223 */
224#define HAS_GETTIMEOFDAY /**/
225#ifdef HAS_GETTIMEOFDAY
226#define Timeval struct timeval /* Structure used by gettimeofday() */
227#endif
228
229/* HAS_GETGROUPS:
230 * This symbol, if defined, indicates that the getgroups() routine is
231 * available to get the list of process groups. If unavailable, multiple
232 * groups are probably not supported.
233 */
234/*#define HAS_GETGROUPS /**/
235
236/* HAS_GETLOGIN:
237 * This symbol, if defined, indicates that the getlogin routine is
238 * available to get the login name.
239 */
240/*#define HAS_GETLOGIN /**/
241
242/* HAS_GETPGID:
243 * This symbol, if defined, indicates to the C program that
244 * the getpgid(pid) function is available to get the
245 * process group id.
246 */
247/*#define HAS_GETPGID /**/
248
249/* HAS_GETPGRP:
250 * This symbol, if defined, indicates that the getpgrp routine is
251 * available to get the current process group.
252 */
253/* USE_BSD_GETPGRP:
254 * This symbol, if defined, indicates that getpgrp needs one
255 * arguments whereas USG one needs none.
256 */
257/*#define HAS_GETPGRP /**/
258/*#define USE_BSD_GETPGRP / **/
259
260/* HAS_GETPGRP2:
261 * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
262 * routine is available to get the current process group.
263 */
264/*#define HAS_GETPGRP2 / **/
265
266/* HAS_GETPPID:
267 * This symbol, if defined, indicates that the getppid routine is
268 * available to get the parent process ID.
269 */
270/*#define HAS_GETPPID /**/
271
272/* HAS_GETPRIORITY:
273 * This symbol, if defined, indicates that the getpriority routine is
274 * available to get a process's priority.
275 */
276/*#define HAS_GETPRIORITY /**/
277
278/* HAS_INET_ATON:
279 * This symbol, if defined, indicates to the C program that the
280 * inet_aton() function is available to parse IP address "dotted-quad"
281 * strings.
282 */
283/*#define HAS_INET_ATON /**/
284
285/* HAS_KILLPG:
286 * This symbol, if defined, indicates that the killpg routine is available
287 * to kill process groups. If unavailable, you probably should use kill
288 * with a negative process number.
289 */
290/*#define HAS_KILLPG /**/
291
292/* HAS_LINK:
293 * This symbol, if defined, indicates that the link routine is
294 * available to create hard links.
295 */
296/*#define HAS_LINK /**/
297
298/* HAS_LOCALECONV:
299 * This symbol, if defined, indicates that the localeconv routine is
300 * available for numeric and monetary formatting conventions.
301 */
302/*#define HAS_LOCALECONV /**/
303
304/* HAS_LOCKF:
305 * This symbol, if defined, indicates that the lockf routine is
306 * available to do file locking.
307 */
308/*#define HAS_LOCKF /**/
309
310/* HAS_LSTAT:
311 * This symbol, if defined, indicates that the lstat routine is
312 * available to do file stats on symbolic links.
313 */
314/*#define HAS_LSTAT /**/
315
316/* HAS_MBLEN:
317 * This symbol, if defined, indicates that the mblen routine is available
318 * to find the number of bytes in a multibye character.
319 */
320/*#define HAS_MBLEN /**/
321
322/* HAS_MBSTOWCS:
323 * This symbol, if defined, indicates that the mbstowcs routine is
324 * available to covert a multibyte string into a wide character string.
325 */
326/*#define HAS_MBSTOWCS /**/
327
328/* HAS_MBTOWC:
329 * This symbol, if defined, indicates that the mbtowc routine is available
330 * to covert a multibyte to a wide character.
331 */
332/*#define HAS_MBTOWC /**/
333
334/* HAS_MEMCMP:
335 * This symbol, if defined, indicates that the memcmp routine is available
336 * to compare blocks of memory.
337 */
338#define HAS_MEMCMP /**/
339
340/* HAS_MEMCPY:
341 * This symbol, if defined, indicates that the memcpy routine is available
342 * to copy blocks of memory.
343 */
344#define HAS_MEMCPY /**/
345
346/* HAS_MEMMOVE:
347 * This symbol, if defined, indicates that the memmove routine is available
348 * to copy potentially overlapping blocks of memory. This should be used
349 * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
350 * own version.
351 */
352#define HAS_MEMMOVE /**/
353
354/* HAS_MEMSET:
355 * This symbol, if defined, indicates that the memset routine is available
356 * to set blocks of memory.
357 */
358#define HAS_MEMSET /**/
359
360/* HAS_MKDIR:
361 * This symbol, if defined, indicates that the mkdir routine is available
362 * to create directories. Otherwise you should fork off a new process to
363 * exec /bin/mkdir.
364 */
365#define HAS_MKDIR /**/
366
367/* HAS_MKFIFO:
368 * This symbol, if defined, indicates that the mkfifo routine is
369 * available to create FIFOs. Otherwise, mknod should be able to
370 * do it for you. However, if mkfifo is there, mknod might require
371 * super-user privileges which mkfifo will not.
372 */
373/*#define HAS_MKFIFO /**/
374
375/* HAS_MKTIME:
376 * This symbol, if defined, indicates that the mktime routine is
377 * available.
378 */
379#define HAS_MKTIME /**/
380
381/* HAS_MSYNC:
382 * This symbol, if defined, indicates that the msync system call is
383 * available to synchronize a mapped file.
384 */
385/*#define HAS_MSYNC /**/
386
387/* HAS_MUNMAP:
388 * This symbol, if defined, indicates that the munmap system call is
389 * available to unmap a region, usually mapped by mmap().
390 */
391/*#define HAS_MUNMAP /**/
392
393/* HAS_NICE:
394 * This symbol, if defined, indicates that the nice routine is
395 * available.
396 */
397/*#define HAS_NICE /**/
398
399/* HAS_PATHCONF:
400 * This symbol, if defined, indicates that pathconf() is available
401 * to determine file-system related limits and options associated
402 * with a given filename.
403 */
404/* HAS_FPATHCONF:
405 * This symbol, if defined, indicates that pathconf() is available
406 * to determine file-system related limits and options associated
407 * with a given open file descriptor.
408 */
409/*#define HAS_PATHCONF /**/
410/*#define HAS_FPATHCONF /**/
411
412/* HAS_PAUSE:
413 * This symbol, if defined, indicates that the pause routine is
414 * available to suspend a process until a signal is received.
415 */
416/*#define HAS_PAUSE /**/
417
418/* HAS_PIPE:
419 * This symbol, if defined, indicates that the pipe routine is
420 * available to create an inter-process channel.
421 */
422/*#define HAS_PIPE /**/
423
424/* HAS_POLL:
425 * This symbol, if defined, indicates that the poll routine is
426 * available to poll active file descriptors. You may safely
427 * include <poll.h> when this symbol is defined.
428 */
429/*#define HAS_POLL /**/
430
431/* HAS_READDIR:
432 * This symbol, if defined, indicates that the readdir routine is
433 * available to read directory entries. You may have to include
434 * <dirent.h>. See I_DIRENT.
435 */
436#define HAS_READDIR /**/
437
438/* HAS_SEEKDIR:
439 * This symbol, if defined, indicates that the seekdir routine is
440 * available. You may have to include <dirent.h>. See I_DIRENT.
441 */
442#define HAS_SEEKDIR /**/
443
444/* HAS_TELLDIR:
445 * This symbol, if defined, indicates that the telldir routine is
446 * available. You may have to include <dirent.h>. See I_DIRENT.
447 */
448#define HAS_TELLDIR /**/
449
450/* HAS_REWINDDIR:
451 * This symbol, if defined, indicates that the rewinddir routine is
452 * available. You may have to include <dirent.h>. See I_DIRENT.
453 */
454#define HAS_REWINDDIR /**/
455
456/* HAS_READLINK:
457 * This symbol, if defined, indicates that the readlink routine is
458 * available to read the value of a symbolic link.
459 */
460/*#define HAS_READLINK /**/
461
462/* HAS_RENAME:
463 * This symbol, if defined, indicates that the rename routine is available
464 * to rename files. Otherwise you should do the unlink(), link(), unlink()
465 * trick.
466 */
467#define HAS_RENAME /**/
468
469/* HAS_RMDIR:
470 * This symbol, if defined, indicates that the rmdir routine is
471 * available to remove directories. Otherwise you should fork off a
472 * new process to exec /bin/rmdir.
473 */
474#define HAS_RMDIR /**/
475
476/* HAS_SELECT:
477 * This symbol, if defined, indicates that the select routine is
478 * available to select active file descriptors. If the timeout field
479 * is used, <sys/time.h> may need to be included.
480 */
481/*#define HAS_SELECT /**/
482
483/* HAS_SETEGID:
484 * This symbol, if defined, indicates that the setegid routine is available
485 * to change the effective gid of the current program.
486 */
487/*#define HAS_SETEGID /**/
488
489/* HAS_SETEUID:
490 * This symbol, if defined, indicates that the seteuid routine is available
491 * to change the effective uid of the current program.
492 */
493/*#define HAS_SETEUID /**/
494
495/* HAS_SETLINEBUF:
496 * This symbol, if defined, indicates that the setlinebuf routine is
497 * available to change stderr or stdout from block-buffered or unbuffered
498 * to a line-buffered mode.
499 */
500/*#define HAS_SETLINEBUF /**/
501
502/* HAS_SETLOCALE:
503 * This symbol, if defined, indicates that the setlocale routine is
504 * available to handle locale-specific ctype implementations.
505 */
506/*#define HAS_SETLOCALE /**/
507
508/* HAS_SETPGID:
509 * This symbol, if defined, indicates that the setpgid(pid, gpid)
510 * routine is available to set process group ID.
511 */
512/*#define HAS_SETPGID /**/
513
514/* HAS_SETPGRP:
515 * This symbol, if defined, indicates that the setpgrp routine is
516 * available to set the current process group.
517 */
518/* USE_BSD_SETPGRP:
519 * This symbol, if defined, indicates that setpgrp needs two
520 * arguments whereas USG one needs none. See also HAS_SETPGID
521 * for a POSIX interface.
522 */
523/*#define HAS_SETPGRP /**/
524/*#define USE_BSD_SETPGRP /**/
525
526/* HAS_SETPGRP2:
527 * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
528 * routine is available to set the current process group.
529 */
530/*#define HAS_SETPGRP2 / **/
531
532/* HAS_SETPRIORITY:
533 * This symbol, if defined, indicates that the setpriority routine is
534 * available to set a process's priority.
535 */
536/*#define HAS_SETPRIORITY /**/
537
538/* HAS_SETREGID:
539 * This symbol, if defined, indicates that the setregid routine is
540 * available to change the real and effective gid of the current
541 * process.
542 */
543/* HAS_SETRESGID:
544 * This symbol, if defined, indicates that the setresgid routine is
545 * available to change the real, effective and saved gid of the current
546 * process.
547 */
548/*#define HAS_SETREGID /**/
549/*#define HAS_SETRESGID / **/
550
551/* HAS_SETREUID:
552 * This symbol, if defined, indicates that the setreuid routine is
553 * available to change the real and effective uid of the current
554 * process.
555 */
556/* HAS_SETRESUID:
557 * This symbol, if defined, indicates that the setresuid routine is
558 * available to change the real, effective and saved uid of the current
559 * process.
560 */
561/*#define HAS_SETREUID /**/
562/*#define HAS_SETRESUID / **/
563
564/* HAS_SETRGID:
565 * This symbol, if defined, indicates that the setrgid routine is available
566 * to change the real gid of the current program.
567 */
568/*#define HAS_SETRGID /**/
569
570/* HAS_SETRUID:
571 * This symbol, if defined, indicates that the setruid routine is available
572 * to change the real uid of the current program.
573 */
574/*#define HAS_SETRUID /**/
575
576/* HAS_SETSID:
577 * This symbol, if defined, indicates that the setsid routine is
578 * available to set the process group ID.
579 */
580/*#define HAS_SETSID /**/
581
582/* Shmat_t:
583 * This symbol holds the return type of the shmat() system call.
584 * Usually set to 'void *' or 'char *'.
585 */
586/* HAS_SHMAT_PROTOTYPE:
587 * This symbol, if defined, indicates that the sys/shm.h includes
588 * a prototype for shmat(). Otherwise, it is up to the program to
589 * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
590 * but not always right so it should be emitted by the program only
591 * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
592 */
593/*#define Shmat_t void * /**/
594/*#define HAS_SHMAT_PROTOTYPE /**/
595
596/* HAS_STRCHR:
597 * This symbol is defined to indicate that the strchr()/strrchr()
598 * functions are available for string searching. If not, try the
599 * index()/rindex() pair.
600 */
601/* HAS_INDEX:
602 * This symbol is defined to indicate that the index()/rindex()
603 * functions are available for string searching.
604 */
605#define HAS_STRCHR /**/
606/*#define HAS_INDEX / **/
607
608/* HAS_STRCOLL:
609 * This symbol, if defined, indicates that the strcoll routine is
610 * available to compare strings using collating information.
611 */
612#define HAS_STRCOLL /**/
613
614/* USE_STRUCT_COPY:
615 * This symbol, if defined, indicates that this C compiler knows how
616 * to copy structures. If undefined, you'll need to use a block copy
617 * routine of some sort instead.
618 */
619#define USE_STRUCT_COPY /**/
620
621/* HAS_STRTOD:
622 * This symbol, if defined, indicates that the strtod routine is
623 * available to provide better numeric string conversion than atof().
624 */
625#define HAS_STRTOD /**/
626
627/* HAS_STRTOL:
628 * This symbol, if defined, indicates that the strtol routine is available
629 * to provide better numeric string conversion than atoi() and friends.
630 */
631#define HAS_STRTOL /**/
632
633/* HAS_STRTOUL:
634 * This symbol, if defined, indicates that the strtoul routine is
635 * available to provide conversion of strings to unsigned long.
636 */
637#define HAS_STRTOUL /**/
638
639/* HAS_STRXFRM:
640 * This symbol, if defined, indicates that the strxfrm() routine is
641 * available to transform strings.
642 */
643#define HAS_STRXFRM /**/
644
645/* HAS_SYMLINK:
646 * This symbol, if defined, indicates that the symlink routine is available
647 * to create symbolic links.
648 */
649/*#define HAS_SYMLINK /**/
650
651/* HAS_SYSCALL:
652 * This symbol, if defined, indicates that the syscall routine is
653 * available to call arbitrary system calls. If undefined, that's tough.
654 */
655/*#define HAS_SYSCALL /**/
656
657/* HAS_SYSCONF:
658 * This symbol, if defined, indicates that sysconf() is available
659 * to determine system related limits and options.
660 */
661#define HAS_SYSCONF /**/
662
663/* HAS_SYSTEM:
664 * This symbol, if defined, indicates that the system routine is
665 * available to issue a shell command.
666 */
667#define HAS_SYSTEM /**/
668
669/* HAS_TCGETPGRP:
670 * This symbol, if defined, indicates that the tcgetpgrp routine is
671 * available to get foreground process group ID.
672 */
673/*#define HAS_TCGETPGRP /**/
674
675/* HAS_TCSETPGRP:
676 * This symbol, if defined, indicates that the tcsetpgrp routine is
677 * available to set foreground process group ID.
678 */
679/*#define HAS_TCSETPGRP /**/
680
681/* HAS_TRUNCATE:
682 * This symbol, if defined, indicates that the truncate routine is
683 * available to truncate files.
684 */
685/*#define HAS_TRUNCATE /**/
686
687/* HAS_TZNAME:
688 * This symbol, if defined, indicates that the tzname[] array is
689 * available to access timezone names.
690 */
691/*#define HAS_TZNAME /**/
692
693/* HAS_UMASK:
694 * This symbol, if defined, indicates that the umask routine is
695 * available to set and get the value of the file creation mask.
696 */
697/*#define HAS_UMASK /**/
698
699/* HASVOLATILE:
700 * This symbol, if defined, indicates that this C compiler knows about
701 * the volatile declaration.
702 */
703#define HASVOLATILE /**/
704#ifndef HASVOLATILE
705#define volatile
706#endif
707
708/* HAS_WAIT4:
709 * This symbol, if defined, indicates that wait4() exists.
710 */
711/*#define HAS_WAIT4 /**/
712
713/* HAS_WAITPID:
714 * This symbol, if defined, indicates that the waitpid routine is
715 * available to wait for child process.
716 */
717/*#define HAS_WAITPID /**/
718
719/* HAS_WCSTOMBS:
720 * This symbol, if defined, indicates that the wcstombs routine is
721 * available to convert wide character strings to multibyte strings.
722 */
723/*#define HAS_WCSTOMBS /**/
724
725/* HAS_WCTOMB:
726 * This symbol, if defined, indicates that the wctomb routine is available
727 * to covert a wide character to a multibyte.
728 */
729/*#define HAS_WCTOMB /**/
730
731/* I_ARPA_INET:
732 * This symbol, if defined, indicates to the C program that it should
733 * include <arpa/inet.h> to get inet_addr and friends declarations.
734 */
735#define I_ARPA_INET /**/
736
737/* I_DBM:
738 * This symbol, if defined, indicates that <dbm.h> exists and should
739 * be included.
740 */
741/* I_RPCSVC_DBM:
742 * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
743 * should be included.
744 */
745/*#define I_DBM /**/
746/*#define I_RPCSVC_DBM / **/
747
748/* I_DIRENT:
749 * This symbol, if defined, indicates to the C program that it should
750 * include <dirent.h>. Using this symbol also triggers the definition
751 * of the Direntry_t define which ends up being 'struct dirent' or
752 * 'struct direct' depending on the availability of <dirent.h>.
753 */
754/* DIRNAMLEN:
755 * This symbol, if defined, indicates to the C program that the length
756 * of directory entry names is provided by a d_namlen field. Otherwise
757 * you need to do strlen() on the d_name field.
758 */
759/* Direntry_t:
760 * This symbol is set to 'struct direct' or 'struct dirent' depending on
761 * whether dirent is available or not. You should use this pseudo type to
762 * portably declare your directory entries.
763 */
764#define I_DIRENT /**/
765/*#define DIRNAMLEN /**/
766#define Direntry_t struct dirent
767
768/* I_DLFCN:
769 * This symbol, if defined, indicates that <dlfcn.h> exists and should
770 * be included.
771 */
772/*#define I_DLFCN /**/
773
774/* I_FCNTL:
775 * This manifest constant tells the C program to include <fcntl.h>.
776 */
777#define I_FCNTL / **/
778
779/* I_FLOAT:
780 * This symbol, if defined, indicates to the C program that it should
781 * include <float.h> to get definition of symbols like DBL_MAX or
782 * DBL_MIN, i.e. machine dependent floating point values.
783 */
784/*#define I_FLOAT /**/
785
786/* I_LIMITS:
787 * This symbol, if defined, indicates to the C program that it should
788 * include <limits.h> to get definition of symbols like WORD_BIT or
789 * LONG_MAX, i.e. machine dependant limitations.
790 */
791#define I_LIMITS /**/
792
793/* I_LOCALE:
794 * This symbol, if defined, indicates to the C program that it should
795 * include <locale.h>.
796 */
797/*#define I_LOCALE /**/
798
799/* I_MATH:
800 * This symbol, if defined, indicates to the C program that it should
801 * include <math.h>.
802 */
803#define I_MATH /**/
804
805/* I_MEMORY:
806 * This symbol, if defined, indicates to the C program that it should
807 * include <memory.h>.
808 */
809/*#define I_MEMORY / **/
810
811/* I_NDBM:
812 * This symbol, if defined, indicates that <ndbm.h> exists and should
813 * be included.
814 */
815/*#define I_NDBM /**/
816
817/* I_NET_ERRNO:
818 * This symbol, if defined, indicates that <net/errno.h> exists and
819 * should be included.
820 */
821/*#define I_NET_ERRNO / **/
822
823/* I_NETINET_IN:
824 * This symbol, if defined, indicates to the C program that it should
825 * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
826 */
827#define I_NETINET_IN /**/
828
829/* I_SFIO:
830 * This symbol, if defined, indicates to the C program that it should
831 * include <sfio.h>.
832 */
833/*#define I_SFIO / **/
834
835/* I_STDDEF:
836 * This symbol, if defined, indicates that <stddef.h> exists and should
837 * be included.
838 */
839#define I_STDDEF /**/
840
841/* I_STDLIB:
842 * This symbol, if defined, indicates that <stdlib.h> exists and should
843 * be included.
844 */
845#define I_STDLIB /**/
846
847/* I_STRING:
848 * This symbol, if defined, indicates to the C program that it should
849 * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
850 */
851#define I_STRING /**/
852
853/* I_SYS_DIR:
854 * This symbol, if defined, indicates to the C program that it should
855 * include <sys/dir.h>.
856 */
857/*#define I_SYS_DIR /**/
858
859/* I_SYS_FILE:
860 * This symbol, if defined, indicates to the C program that it should
861 * include <sys/file.h> to get definition of R_OK and friends.
862 */
863/*#define I_SYS_FILE /**/
864
865/* I_SYS_IOCTL:
866 * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
867 * be included. Otherwise, include <sgtty.h> or <termio.h>.
868 */
869#define I_SYS_IOCTL /**/
870
871/* I_SYS_NDIR:
872 * This symbol, if defined, indicates to the C program that it should
873 * include <sys/ndir.h>.
874 */
875/*#define I_SYS_NDIR / **/
876
877/* I_SYS_PARAM:
878 * This symbol, if defined, indicates to the C program that it should
879 * include <sys/param.h>.
880 */
881#define I_SYS_PARAM /**/
882
883/* I_SYS_RESOURCE:
884 * This symbol, if defined, indicates to the C program that it should
885 * include <sys/resource.h>.
886 */
887#define I_SYS_RESOURCE /**/
888
889/* I_SYS_SELECT:
890 * This symbol, if defined, indicates to the C program that it should
891 * include <sys/select.h> in order to get definition of struct timeval.
892 */
893/*#define I_SYS_SELECT /**/
894
895/* I_SYS_STAT:
896 * This symbol, if defined, indicates to the C program that it should
897 * include <sys/stat.h>.
898 */
899#define I_SYS_STAT /**/
900
901/* I_SYS_TIMES:
902 * This symbol, if defined, indicates to the C program that it should
903 * include <sys/times.h>.
904 */
905#define I_SYS_TIMES /**/
906
907/* I_SYS_TYPES:
908 * This symbol, if defined, indicates to the C program that it should
909 * include <sys/types.h>.
910 */
911#define I_SYS_TYPES /**/
912
913/* I_SYS_UN:
914 * This symbol, if defined, indicates to the C program that it should
915 * include <sys/un.h> to get UNIX domain socket definitions.
916 */
917/*#define I_SYS_UN /**/
918
919/* I_SYS_WAIT:
920 * This symbol, if defined, indicates to the C program that it should
921 * include <sys/wait.h>.
922 */
923#define I_SYS_WAIT /**/
924
925/* I_TERMIO:
926 * This symbol, if defined, indicates that the program should include
927 * <termio.h> rather than <sgtty.h>. There are also differences in
928 * the ioctl() calls that depend on the value of this symbol.
929 */
930/* I_TERMIOS:
931 * This symbol, if defined, indicates that the program should include
932 * the POSIX termios.h rather than sgtty.h or termio.h.
933 * There are also differences in the ioctl() calls that depend on the
934 * value of this symbol.
935 */
936/* I_SGTTY:
937 * This symbol, if defined, indicates that the program should include
938 * <sgtty.h> rather than <termio.h>. There are also differences in
939 * the ioctl() calls that depend on the value of this symbol.
940 */
941/*#define I_TERMIO / **/
942/*#define I_TERMIOS /**/
943/*#define I_SGTTY / **/
944
945/* I_UNISTD:
946 * This symbol, if defined, indicates to the C program that it should
947 * include <unistd.h>.
948 */
949#define I_UNISTD /**/
950
951/* I_UTIME:
952 * This symbol, if defined, indicates to the C program that it should
953 * include <utime.h>.
954 */
955/*#define I_UTIME /**/
956
957/* I_VALUES:
958 * This symbol, if defined, indicates to the C program that it should
959 * include <values.h> to get definition of symbols like MINFLOAT or
960 * MAXLONG, i.e. machine dependant limitations. Probably, you
961 * should use <limits.h> instead, if it is available.
962 */
963/*#define I_VALUES /**/
964
965/* I_STDARG:
966 * This symbol, if defined, indicates that <stdarg.h> exists and should
967 * be included.
968 */
969/* I_VARARGS:
970 * This symbol, if defined, indicates to the C program that it should
971 * include <varargs.h>.
972 */
973#define I_STDARG /**/
974/*#define I_VARARGS / **/
975
976/* I_VFORK:
977 * This symbol, if defined, indicates to the C program that it should
978 * include vfork.h.
979 */
980/*#define I_VFORK / **/
981
982/* CAN_PROTOTYPE:
983 * If defined, this macro indicates that the C compiler can handle
984 * function prototypes.
985 */
986/* _:
987 * This macro is used to declare function parameters for folks who want
988 * to make declarations with prototypes using a different style than
989 * the above macros. Use double parentheses. For example:
990 *
991 * int main _((int argc, char *argv[]));
992 */
993#define CAN_PROTOTYPE /**/
994#ifdef CAN_PROTOTYPE
995#define _(args) args
996#else
997#define _(args) ()
998#endif
999
1000/* SH_PATH:
1001 * This symbol contains the full pathname to the shell used on this
1002 * on this system to execute Bourne shell scripts. Usually, this will be
1003 * /bin/sh, though it's possible that some systems will have /bin/ksh,
1004 * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
1005 * D:/bin/sh.exe.
1006 */
1007#define SH_PATH "/bin/sh" /**/
1008
1009/* STDCHAR:
1010 * This symbol is defined to be the type of char used in stdio.h.
1011 * It has the values "unsigned char" or "char".
1012 */
1013#define STDCHAR char /**/
1014
1015/* HAS_ACCESSX:
1016 * This symbol, if defined, indicates that the accessx routine is
1017 * available to do extended access checks.
1018 */
1019/*#define HAS_ACCESSX / **/
1020
1021/* HAS_EACCESS:
1022 * This symbol, if defined, indicates that the eaccess routine is
1023 * available to do extended access checks.
1024 */
1025/*#define HAS_EACCESS / **/
1026
1027/* I_SYS_ACCESS:
1028 * This symbol, if defined, indicates to the C program that it should
1029 * include <sys/access.h>.
1030 */
1031/*#define I_SYS_ACCESS /**/
1032
1033/* I_SYS_SECURITY:
1034 * This symbol, if defined, indicates to the C program that it should
1035 * include <sys/security.h>.
1036 */
1037/*#define I_SYS_SECURITY /**/
1038
1039/* CROSSCOMPILE:
1040 * This symbol, if defined, signifies that we our
1041 * build process is a cross-compilation.
1042 */
1043#define CROSSCOMPILE / **/
1044
1045/* INTSIZE:
1046 * This symbol contains the value of sizeof(int) so that the C
1047 * preprocessor can make decisions based on it.
1048 */
1049/* LONGSIZE:
1050 * This symbol contains the value of sizeof(long) so that the C
1051 * preprocessor can make decisions based on it.
1052 */
1053/* SHORTSIZE:
1054 * This symbol contains the value of sizeof(short) so that the C
1055 * preprocessor can make decisions based on it.
1056 */
1057#define INTSIZE 4 /**/
ae2d1787 1058#define LONGSIZE 4 /**/
4d2c4e07
OF
1059#define SHORTSIZE 2 /**/
1060
1061/* MULTIARCH:
1062 * This symbol, if defined, signifies that the build
1063 * process will produce some binary files that are going to be
1064 * used in a cross-platform environment. This is the case for
1065 * example with the NeXT "fat" binaries that contain executables
1066 * for several CPUs.
1067 */
1068#define MULTIARCH / **/
1069
1070/* MEM_ALIGNBYTES:
1071 * This symbol contains the number of bytes required to align a
1072 * double. Usual values are 2, 4 and 8. The default is eight,
1073 * for safety.
1074 */
1075#if defined(CROSSCOMPILE) || defined(MULTIARCH)
1076# define MEM_ALIGNBYTES 8
1077#else
1078#define MEM_ALIGNBYTES 8
1079#endif
1080
1081/* BYTEORDER:
1082 * This symbol holds the hexadecimal constant defined in byteorder,
1083 * i.e. 0x1234 or 0x4321, etc...
1084 * If the compiler supports cross-compiling or multiple-architecture
1085 * binaries (eg. on NeXT systems), use compiler-defined macros to
1086 * determine the byte order.
1087 * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
1088 * Binaries (MAB) on either big endian or little endian machines.
1089 * The endian-ness is available at compile-time. This only matters
1090 * for perl, where the config.h can be generated and installed on
1091 * one system, and used by a different architecture to build an
1092 * extension. Older versions of NeXT that might not have
1093 * defined either *_ENDIAN__ were all on Motorola 680x0 series,
1094 * so the default case (for NeXT) is big endian to catch them.
1095 * This might matter for NeXT 3.0.
1096 */
1097#if defined(CROSSCOMPILE) || defined(MULTIARCH)
1098# ifdef __LITTLE_ENDIAN__
1099# if LONGSIZE == 4
1100# define BYTEORDER 0x1234
1101# else
1102# if LONGSIZE == 8
1103# define BYTEORDER 0x12345678
1104# endif
1105# endif
1106# else
1107# ifdef __BIG_ENDIAN__
1108# if LONGSIZE == 4
1109# define BYTEORDER 0x4321
1110# else
1111# if LONGSIZE == 8
1112# define BYTEORDER 0x87654321
1113# endif
1114# endif
1115# endif
1116# endif
1117# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
1118# define BYTEORDER 0x4321
1119# endif
1120#else
1121#define BYTEORDER 0x12345678 /* large digits for MSB */
1122#endif /* NeXT */
1123
1124/* CASTI32:
1125 * This symbol is defined if the C compiler can cast negative
1126 * or large floating point numbers to 32-bit ints.
1127 */
1128/*#define CASTI32 / **/
1129
1130/* CASTNEGFLOAT:
1131 * This symbol is defined if the C compiler can cast negative
1132 * numbers to unsigned longs, ints and shorts.
1133 */
1134/* CASTFLAGS:
1135 * This symbol contains flags that say what difficulties the compiler
1136 * has casting odd floating values to unsigned long:
1137 * 0 = ok
1138 * 1 = couldn't cast < 0
1139 * 2 = couldn't cast >= 0x80000000
1140 * 4 = couldn't cast in argument expression list
1141 */
1142/*#define CASTNEGFLOAT /**/
1143/*#define CASTFLAGS 0 /**/
1144
1145/* VOID_CLOSEDIR:
1146 * This symbol, if defined, indicates that the closedir() routine
1147 * does not return a value.
1148 */
1149/*#define VOID_CLOSEDIR / **/
1150
1151/* HAS_FD_SET:
1152 * This symbol, when defined, indicates presence of the fd_set typedef
1153 * in <sys/types.h>
1154 */
1155#define HAS_FD_SET /**/
1156
1157/* Gconvert:
1158 * This preprocessor macro is defined to convert a floating point
1159 * number to a string without a trailing decimal point. This
1160 * emulates the behavior of sprintf("%g"), but is sometimes much more
1161 * efficient. If gconvert() is not available, but gcvt() drops the
1162 * trailing decimal point, then gcvt() is used. If all else fails,
1163 * a macro using sprintf("%g") is used. Arguments for the Gconvert
1164 * macro are: value, number of digits, whether trailing zeros should
1165 * be retained, and the output buffer.
1166 * Possible values are:
1167 * d_Gconvert='gconvert((x),(n),(t),(b))'
1168 * d_Gconvert='gcvt((x),(n),(b))'
1169 * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
1170 * The last two assume trailing zeros should not be kept.
1171 */
1172#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
1173
1174/* HAS_GNULIBC:
1175 * This symbol, if defined, indicates to the C program that
1176 * the GNU C library is being used.
1177 */
1178/*#define HAS_GNULIBC / **/
1179/* HAS_ISASCII:
1180 * This manifest constant lets the C program know that isascii
1181 * is available.
1182 */
1183#define HAS_ISASCII /**/
1184
1185/* HAS_LCHOWN:
1186 * This symbol, if defined, indicates that the lchown routine is
1187 * available to operate on a symbolic link (instead of following the
1188 * link).
1189 */
1190/*##define HAS_LCHOWN /**/
1191
1192/* HAS_OPEN3:
1193 * This manifest constant lets the C program know that the three
1194 * argument form of open(2) is available.
1195 */
1196#define HAS_OPEN3 /**/
1197
1198/* HAS_SAFE_BCOPY:
1199 * This symbol, if defined, indicates that the bcopy routine is available
1200 * to copy potentially overlapping memory blocks. Otherwise you should
1201 * probably use memmove() or memcpy(). If neither is defined, roll your
1202 * own version.
1203 */
1204/*##define HAS_SAFE_BCOPY /**/
1205
1206/* HAS_SAFE_MEMCPY:
1207 * This symbol, if defined, indicates that the memcpy routine is available
1208 * to copy potentially overlapping memory blocks. Otherwise you should
1209 * probably use memmove() or memcpy(). If neither is defined, roll your
1210 * own version.
1211 */
1212/*#define HAS_SAFE_MEMCPY / **/
1213
1214/* HAS_SANE_MEMCMP:
1215 * This symbol, if defined, indicates that the memcmp routine is available
1216 * and can be used to compare relative magnitudes of chars with their high
1217 * bits set. If it is not defined, roll your own version.
1218 */
1219#define HAS_SANE_MEMCMP /**/
1220
1221/* HAS_SIGACTION:
1222 * This symbol, if defined, indicates that Vr4's sigaction() routine
1223 * is available.
1224 */
1225/*##define HAS_SIGACTION /**/
1226
1227/* HAS_SIGSETJMP:
1228 * This variable indicates to the C program that the sigsetjmp()
1229 * routine is available to save the calling process's registers
1230 * and stack environment for later use by siglongjmp(), and
1231 * to optionally save the process's signal mask. See
1232 * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
1233 */
1234/* Sigjmp_buf:
1235 * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
1236 */
1237/* Sigsetjmp:
1238 * This macro is used in the same way as sigsetjmp(), but will invoke
1239 * traditional setjmp() if sigsetjmp isn't available.
1240 * See HAS_SIGSETJMP.
1241 */
1242/* Siglongjmp:
1243 * This macro is used in the same way as siglongjmp(), but will invoke
1244 * traditional longjmp() if siglongjmp isn't available.
1245 * See HAS_SIGSETJMP.
1246 */
1247/*##define HAS_SIGSETJMP /**/
1248#ifdef HAS_SIGSETJMP
1249#define Sigjmp_buf sigjmp_buf
1250#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
1251#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
1252#else
1253#define Sigjmp_buf jmp_buf
1254#define Sigsetjmp(buf,save_mask) setjmp((buf))
1255#define Siglongjmp(buf,retval) longjmp((buf),(retval))
1256#endif
1257
1258/* USE_STDIO_PTR:
1259 * This symbol is defined if the _ptr and _cnt fields (or similar)
1260 * of the stdio FILE structure can be used to access the stdio buffer
1261 * for a file handle. If this is defined, then the FILE_ptr(fp)
1262 * and FILE_cnt(fp) macros will also be defined and should be used
1263 * to access these fields.
1264 */
1265/* FILE_ptr:
1266 * This macro is used to access the _ptr field (or equivalent) of the
1267 * FILE structure pointed to by its argument. This macro will always be
1268 * defined if USE_STDIO_PTR is defined.
1269 */
1270/* STDIO_PTR_LVALUE:
1271 * This symbol is defined if the FILE_ptr macro can be used as an
1272 * lvalue.
1273 */
1274/* FILE_cnt:
1275 * This macro is used to access the _cnt field (or equivalent) of the
1276 * FILE structure pointed to by its argument. This macro will always be
1277 * defined if USE_STDIO_PTR is defined.
1278 */
1279/* STDIO_CNT_LVALUE:
1280 * This symbol is defined if the FILE_cnt macro can be used as an
1281 * lvalue.
1282 */
1283/*##define USE_STDIO_PTR /**/
1284#ifdef USE_STDIO_PTR
1285#define FILE_ptr(fp) ((fp)->_ptr)
1286#define STDIO_PTR_LVALUE /**/
1287#define FILE_cnt(fp) ((fp)->_cnt)
1288#define STDIO_CNT_LVALUE /**/
1289#endif
1290
1291/* USE_STDIO_BASE:
1292 * This symbol is defined if the _base field (or similar) of the
1293 * stdio FILE structure can be used to access the stdio buffer for
1294 * a file handle. If this is defined, then the FILE_base(fp) macro
1295 * will also be defined and should be used to access this field.
1296 * Also, the FILE_bufsiz(fp) macro will be defined and should be used
1297 * to determine the number of bytes in the buffer. USE_STDIO_BASE
1298 * will never be defined unless USE_STDIO_PTR is.
1299 */
1300/* FILE_base:
1301 * This macro is used to access the _base field (or equivalent) of the
1302 * FILE structure pointed to by its argument. This macro will always be
1303 * defined if USE_STDIO_BASE is defined.
1304 */
1305/* FILE_bufsiz:
1306 * This macro is used to determine the number of bytes in the I/O
1307 * buffer pointed to by _base field (or equivalent) of the FILE
1308 * structure pointed to its argument. This macro will always be defined
1309 * if USE_STDIO_BASE is defined.
1310 */
1311/*##define USE_STDIO_BASE /**/
1312#ifdef USE_STDIO_BASE
1313#define FILE_base(fp) ((fp)->_base)
1314#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
1315#endif
1316
1317/* HAS_VPRINTF:
1318 * This symbol, if defined, indicates that the vprintf routine is available
1319 * to printf with a pointer to an argument list. If unavailable, you
1320 * may need to write your own, probably in terms of _doprnt().
1321 */
1322/* USE_CHAR_VSPRINTF:
1323 * This symbol is defined if this system has vsprintf() returning type
1324 * (char*). The trend seems to be to declare it as "int vsprintf()". It
1325 * is up to the package author to declare vsprintf correctly based on the
1326 * symbol.
1327 */
1328#define HAS_VPRINTF /**/
1329/*#define USE_CHAR_VSPRINTF / **/
1330
1331/* DOUBLESIZE:
1332 * This symbol contains the size of a double, so that the C preprocessor
1333 * can make decisions based on it.
1334 */
1335#define DOUBLESIZE 8 /**/
1336
1337/* I_TIME:
1338 * This symbol, if defined, indicates to the C program that it should
1339 * include <time.h>.
1340 */
1341/* I_SYS_TIME:
1342 * This symbol, if defined, indicates to the C program that it should
1343 * include <sys/time.h>.
1344 */
1345/* I_SYS_TIME_KERNEL:
1346 * This symbol, if defined, indicates to the C program that it should
1347 * include <sys/time.h> with KERNEL defined.
1348 */
1349#define I_TIME / **/
1350#define I_SYS_TIME /**/
1351/*#define I_SYS_TIME_KERNEL / **/
1352
1353/* VAL_O_NONBLOCK:
1354 * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
1355 * non-blocking I/O for the file descriptor. Note that there is no way
1356 * back, i.e. you cannot turn it blocking again this way. If you wish to
1357 * alternatively switch between blocking and non-blocking, use the
1358 * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
1359 */
1360/* VAL_EAGAIN:
1361 * This symbol holds the errno error code set by read() when no data was
1362 * present on the non-blocking file descriptor.
1363 */
1364/* RD_NODATA:
1365 * This symbol holds the return code from read() when no data is present
1366 * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
1367 * not defined, then you can't distinguish between no data and EOF by
1368 * issuing a read(). You'll have to find another way to tell for sure!
1369 */
1370/* EOF_NONBLOCK:
1371 * This symbol, if defined, indicates to the C program that a read() on
1372 * a non-blocking file descriptor will return 0 on EOF, and not the value
1373 * held in RD_NODATA (-1 usually, in that case!).
1374 */
1375#define VAL_O_NONBLOCK O_NONBLOCK
1376#define VAL_EAGAIN EAGAIN
1377#define RD_NODATA -1
1378#define EOF_NONBLOCK
1379
1380/* PTRSIZE:
1381 * This symbol contains the size of a pointer, so that the C preprocessor
1382 * can make decisions based on it. It will be sizeof(void *) if
1383 * the compiler supports (void *); otherwise it will be
1384 * sizeof(char *).
1385 */
1386#define PTRSIZE 8 /**/
1387
1388/* Drand01:
1389 * This macro is to be used to generate uniformly distributed
1390 * random numbers over the range [0., 1.[. You may have to supply
1391 * an 'extern double drand48();' in your program since SunOS 4.1.3
1392 * doesn't provide you with anything relevant in it's headers.
1393 * See HAS_DRAND48_PROTO.
1394 */
1395/* Rand_seed_t:
1396 * This symbol defines the type of the argument of the
1397 * random seed function.
1398 */
1399/* seedDrand01:
1400 * This symbol defines the macro to be used in seeding the
1401 * random number generator (see Drand01).
1402 */
1403/* RANDBITS:
1404 * This symbol indicates how many bits are produced by the
1405 * function used to generate normalized random numbers.
1406 * Values include 15, 16, 31, and 48.
1407 */
1408#define Drand01() (rand()/(double)((unsigned)1<<RANDBITS))
1409#define Rand_seed_t unsigned /**/
1410#define seedDrand01(x) srand((Rand_seed_t)x) /**/
1411#define RANDBITS 15 /**/
1412
1413/* SSize_t:
1414 * This symbol holds the type used by functions that return
1415 * a count of bytes or an error condition. It must be a signed type.
1416 * It is usually ssize_t, but may be long or int, etc.
1417 * It may be necessary to include <sys/types.h> or <unistd.h>
1418 * to get any typedef'ed information.
1419 * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
1420 */
1421#define SSize_t long /* signed count of bytes */
1422
1423/* EBCDIC:
1424 * This symbol, if defined, indicates that this system uses
1425 * EBCDIC encoding.
1426 */
1427/*#define EBCDIC / **/
1428
1429/* OSNAME:
1430 * This symbol contains the name of the operating system, as determined
1431 * by Configure. You shouldn't rely on it too much; the specific
1432 * feature tests from Configure are generally more reliable.
1433 */
1434#define OSNAME "epoc" /**/
1435
1436/* CAT2:
1437 * This macro catenates 2 tokens together.
1438 */
1439/* STRINGIFY:
1440 * This macro surrounds its token with double quotes.
1441 */
1442#if 42 == 1
1443#define CAT2(a,b)a/**/b
1444#define STRINGIFY(a)"a"
1445 /* If you can get stringification with catify, tell me how! */
1446#endif
1447#if 42 == 42
1448#define CAT2(a,b)a ## b
1449#define StGiFy(a)# a
1450#define STRINGIFY(a)StGiFy(a)
1451#endif
1452#if 42 != 1 && 42 != 42
1453#include "Bletch: How does this C preprocessor catenate tokens?"
1454#endif
1455
1456/* CPPSTDIN:
1457 * This symbol contains the first part of the string which will invoke
1458 * the C preprocessor on the standard input and produce to standard
1459 * output. Typical value of "cc -E" or "/lib/cpp", but it can also
1460 * call a wrapper. See CPPRUN.
1461 */
1462/* CPPMINUS:
1463 * This symbol contains the second part of the string which will invoke
1464 * the C preprocessor on the standard input and produce to standard
1465 * output. This symbol will have the value "-" if CPPSTDIN needs a minus
1466 * to specify standard input, otherwise the value is "".
1467 */
1468/* CPPRUN:
1469 * This symbol contains the string which will invoke a C preprocessor on
1470 * the standard input and produce to standard output. It needs to end
1471 * with CPPLAST, after all other preprocessor flags have been specified.
1472 * The main difference with CPPSTDIN is that this program will never be a
1473 * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
1474 * available directly to the user. Note that it may well be different from
1475 * the preprocessor used to compile the C program.
1476 */
1477#define CPPSTDIN "cppstdin"
1478#define CPPMINUS ""
1479#define CPPRUN "/usr/bin/cpp"
1480
1481/* HAS_ACCESS:
1482 * This manifest constant lets the C program know that the access()
1483 * system call is available to check for accessibility using real UID/GID.
1484 * (always present on UNIX.)
1485 */
1486/*#define HAS_ACCESS /**/
1487
1488/* HAS_CSH:
1489 * This symbol, if defined, indicates that the C-shell exists.
1490 */
1491/* CSH:
1492 * This symbol, if defined, contains the full pathname of csh.
1493 */
1494/*#define HAS_CSH /**/
1495#ifdef HAS_CSH
1496#define CSH "/usr/bin/csh" /**/
1497#endif
1498
1499/* HAS_ENDGRENT:
1500 * This symbol, if defined, indicates that the getgrent routine is
1501 * available for finalizing sequential access of the group database.
1502 */
1503/*#define HAS_ENDGRENT /**/
1504
1505/* HAS_ENDHOSTENT:
1506 * This symbol, if defined, indicates that the endhostent() routine is
1507 * available to close whatever was being used for host queries.
1508 */
1509/*#define HAS_ENDHOSTENT /**/
1510
1511/* HAS_ENDNETENT:
1512 * This symbol, if defined, indicates that the endnetent() routine is
1513 * available to close whatever was being used for network queries.
1514 */
1515/*#define HAS_ENDNETENT /**/
1516
1517/* HAS_ENDPROTOENT:
1518 * This symbol, if defined, indicates that the endprotoent() routine is
1519 * available to close whatever was being used for protocol queries.
1520 */
1521/*#define HAS_ENDPROTOENT /**/
1522
1523/* HAS_ENDPWENT:
1524 * This symbol, if defined, indicates that the getgrent routine is
1525 * available for finalizing sequential access of the passwd database.
1526 */
1527/*#define HAS_ENDPWENT /**/
1528
1529/* HAS_ENDSERVENT:
1530 * This symbol, if defined, indicates that the endservent() routine is
1531 * available to close whatever was being used for service queries.
1532 */
1533/*#define HAS_ENDSERVENT /**/
1534
1535/* HAS_GETGRENT:
1536 * This symbol, if defined, indicates that the getgrent routine is
1537 * available for sequential access of the group database.
1538 */
1539/*#define HAS_GETGRENT /**/
1540
1541/* HAS_GETHOSTBYADDR:
1542 * This symbol, if defined, indicates that the gethostbyaddr() routine is
1543 * available to look up hosts by their IP addresses.
1544 */
1545#define HAS_GETHOSTBYADDR /**/
1546
1547/* HAS_GETHOSTBYNAME:
1548 * This symbol, if defined, indicates that the gethostbyname() routine is
1549 * available to look up host names in some data base or other.
1550 */
1551#define HAS_GETHOSTBYNAME /**/
1552
1553/* HAS_GETHOSTENT:
1554 * This symbol, if defined, indicates that the gethostent() routine is
1555 * available to look up host names in some data base or another.
1556 */
1557/*#define HAS_GETHOSTENT /**/
1558
1559/* HAS_GETHOSTNAME:
1560 * This symbol, if defined, indicates that the C program may use the
1561 * gethostname() routine to derive the host name. See also HAS_UNAME
1562 * and PHOSTNAME.
1563 */
1564/* HAS_UNAME:
1565 * This symbol, if defined, indicates that the C program may use the
1566 * uname() routine to derive the host name. See also HAS_GETHOSTNAME
1567 * and PHOSTNAME.
1568 */
1569/* PHOSTNAME:
1570 * This symbol, if defined, indicates the command to feed to the
1571 * popen() routine to derive the host name. See also HAS_GETHOSTNAME
1572 * and HAS_UNAME. Note that the command uses a fully qualified path,
1573 * so that it is safe even if used by a process with super-user
1574 * privileges.
1575 */
1576/*#define HAS_GETHOSTNAME /**/
1577/*#define HAS_UNAME /**/
1578#undef HAS_PHOSTNAME
1579#ifdef HAS_PHOSTNAME
1580#define PHOSTNAME "" /* How to get the host name */
1581#endif
1582
1583/* HAS_GETNETBYADDR:
1584 * This symbol, if defined, indicates that the getnetbyaddr() routine is
1585 * available to look up networks by their IP addresses.
1586 */
1587/*#define HAS_GETNETBYADDR /**/
1588
1589/* HAS_GETNETBYNAME:
1590 * This symbol, if defined, indicates that the getnetbyname() routine is
1591 * available to look up networks by their names.
1592 */
1593/*#define HAS_GETNETBYNAME /**/
1594
1595/* HAS_GETNETENT:
1596 * This symbol, if defined, indicates that the getnetent() routine is
1597 * available to look up network names in some data base or another.
1598 */
1599/*#define HAS_GETNETENT /**/
1600
1601/* HAS_GETPROTOENT:
1602 * This symbol, if defined, indicates that the getprotoent() routine is
1603 * available to look up protocols in some data base or another.
1604 */
1605/*#define HAS_GETPROTOENT /**/
1606
1607/* HAS_GETPROTOBYNAME:
1608 * This symbol, if defined, indicates that the getprotobyname()
1609 * routine is available to look up protocols by their name.
1610 */
1611/* HAS_GETPROTOBYNUMBER:
1612 * This symbol, if defined, indicates that the getprotobynumber()
1613 * routine is available to look up protocols by their number.
1614 */
1615/*#define HAS_GETPROTOBYNAME /**/
1616/*#define HAS_GETPROTOBYNUMBER /**/
1617
1618/* HAS_GETPWENT:
1619 * This symbol, if defined, indicates that the getpwent routine is
1620 * available for sequential access of the passwd database.
1621 * If this is not available, the older getpw() function may be available.
1622 */
1623/*#define HAS_GETPWENT /**/
1624
1625/* HAS_GETSERVENT:
1626 * This symbol, if defined, indicates that the getservent() routine is
1627 * available to look up network services in some data base or another.
1628 */
1629/*#define HAS_GETSERVENT /**/
1630
1631/* HAS_GETSERVBYNAME:
1632 * This symbol, if defined, indicates that the getservbyname()
1633 * routine is available to look up services by their name.
1634 */
1635/* HAS_GETSERVBYPORT:
1636 * This symbol, if defined, indicates that the getservbyport()
1637 * routine is available to look up services by their port.
1638 */
1639/*#define HAS_GETSERVBYNAME /**/
1640/*#define HAS_GETSERVBYPORT /**/
1641/*
1642/* HAS_HTONL:
1643 * This symbol, if defined, indicates that the htonl() routine (and
1644 * friends htons() ntohl() ntohs()) are available to do network
1645 * order byte swapping.
1646 */
1647/* HAS_HTONS:
1648 * This symbol, if defined, indicates that the htons() routine (and
1649 * friends htonl() ntohl() ntohs()) are available to do network
1650 * order byte swapping.
1651 */
1652/* HAS_NTOHL:
1653 * This symbol, if defined, indicates that the ntohl() routine (and
1654 * friends htonl() htons() ntohs()) are available to do network
1655 * order byte swapping.
1656 */
1657/* HAS_NTOHS:
1658 * This symbol, if defined, indicates that the ntohs() routine (and
1659 * friends htonl() htons() ntohl()) are available to do network
1660 * order byte swapping.
1661 */
1662#define HAS_HTONL /**/
1663#define HAS_HTONS /**/
1664#define HAS_NTOHL /**/
1665#define HAS_NTOHS /**/
1666
1667/* HAS_LONG_DOUBLE:
1668 * This symbol will be defined if the C compiler supports long
1669 * doubles.
1670 */
1671/* LONG_DOUBLESIZE:
1672 * This symbol contains the size of a long double, so that the
1673 * C preprocessor can make decisions based on it. It is only
1674 * defined if the system supports long doubles.
1675 */
1676/*#define HAS_LONG_DOUBLE /**/
1677#ifdef HAS_LONG_DOUBLE
1678#define LONG_DOUBLESIZE 8 /**/
1679#endif
1680
1681/* HAS_LONG_LONG:
1682 * This symbol will be defined if the C compiler supports long long.
1683 */
1684/* LONGLONGSIZE:
1685 * This symbol contains the size of a long long, so that the
1686 * C preprocessor can make decisions based on it. It is only
1687 * defined if the system supports long long.
1688 */
1689/*#define HAS_LONG_LONG /**/
1690#ifdef HAS_LONG_LONG
1691#define LONGLONGSIZE 8 /**/
1692#endif
1693
1694/* HAS_MEMCHR:
1695 * This symbol, if defined, indicates that the memchr routine is available
1696 * to locate characters within a C string.
1697 */
1698#define HAS_MEMCHR /**/
1699
1700/* HAS_MMAP:
1701 * This symbol, if defined, indicates that the mmap system call is
1702 * available to map a file into memory.
1703 */
1704/* Mmap_t:
1705 * This symbol holds the return type of the mmap() system call
1706 * (and simultaneously the type of the first argument).
1707 * Usually set to 'void *' or 'cadd_t'.
1708 */
1709/*#define HAS_MMAP /**/
1710#define Mmap_t void * /**/
1711
1712/* HAS_MSG:
1713 * This symbol, if defined, indicates that the entire msg*(2) library is
1714 * supported (IPC mechanism based on message queues).
1715 */
1716/*#define HAS_MSG /**/
1717
1718/* HAS_SEM:
1719 * This symbol, if defined, indicates that the entire sem*(2) library is
1720 * supported.
1721 */
1722/*#define HAS_SEM /**/
1723
1724/* HAS_SETGRENT:
1725 * This symbol, if defined, indicates that the setgrent routine is
1726 * available for initializing sequential access of the group database.
1727 */
1728/*#define HAS_SETGRENT /**/
1729
1730/* HAS_SETGROUPS:
1731 * This symbol, if defined, indicates that the setgroups() routine is
1732 * available to set the list of process groups. If unavailable, multiple
1733 * groups are probably not supported.
1734 */
1735/*#define HAS_SETGROUPS /**/
1736
1737/* HAS_SETHOSTENT:
1738 * This symbol, if defined, indicates that the sethostent() routine is
1739 * available.
1740 */
1741/*#define HAS_SETHOSTENT /**/
1742
1743/* HAS_SETNETENT:
1744 * This symbol, if defined, indicates that the setnetent() routine is
1745 * available.
1746 */
1747/*#define HAS_SETNETENT /**/
1748
1749/* HAS_SETPROTOENT:
1750 * This symbol, if defined, indicates that the setprotoent() routine is
1751 * available.
1752 */
1753/*#define HAS_SETPROTOENT /**/
1754
1755/* HAS_SETPWENT:
1756 * This symbol, if defined, indicates that the setpwent routine is
1757 * available for initializing sequential access of the passwd database.
1758 */
1759/*#define HAS_SETPWENT /**/
1760
1761/* HAS_SETSERVENT:
1762 * This symbol, if defined, indicates that the setservent() routine is
1763 * available.
1764 */
1765/*#define HAS_SETSERVENT /**/
1766
1767/* HAS_SETVBUF:
1768 * This symbol, if defined, indicates that the setvbuf routine is
1769 * available to change buffering on an open stdio stream.
1770 * to a line-buffered mode.
1771 */
1772/*#define HAS_SETVBUF /**/
1773
1774/* HAS_SHM:
1775 * This symbol, if defined, indicates that the entire shm*(2) library is
1776 * supported.
1777 */
1778/*#define HAS_SHM /**/
1779
1780/* HAS_SOCKET:
1781 * This symbol, if defined, indicates that the BSD socket interface is
1782 * supported.
1783 */
1784/* HAS_SOCKETPAIR:
1785 * This symbol, if defined, indicates that the BSD socketpair() call is
1786 * supported.
1787 */
1788/* HAS_MSG_CTRUNC:
1789 * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
1790 * Checking just with #ifdef might not be enough because this symbol
1791 * has been known to be an enum.
1792 */
1793/* HAS_MSG_DONTROUTE:
1794 * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
1795 * Checking just with #ifdef might not be enough because this symbol
1796 * has been known to be an enum.
1797 */
1798/* HAS_MSG_OOB:
1799 * This symbol, if defined, indicates that the MSG_OOB is supported.
1800 * Checking just with #ifdef might not be enough because this symbol
1801 * has been known to be an enum.
1802 */
1803/* HAS_MSG_PEEK:
1804 * This symbol, if defined, indicates that the MSG_PEEK is supported.
1805 * Checking just with #ifdef might not be enough because this symbol
1806 * has been known to be an enum.
1807 */
1808/* HAS_MSG_PROXY:
1809 * This symbol, if defined, indicates that the MSG_PROXY is supported.
1810 * Checking just with #ifdef might not be enough because this symbol
1811 * has been known to be an enum.
1812 */
1813/* HAS_SCM_RIGHTS:
1814 * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
1815 * Checking just with #ifdef might not be enough because this symbol
1816 * has been known to be an enum.
1817 */
1818/* HAS_SENDMSG:
1819 * This symbol, if defined, indicates that the sendmsg is supported
1820 * to send messages between sockets. You will also need struct
1821 * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
1822 */
1823/* HAS_RECVMSG:
1824 * This symbol, if defined, indicates that the recvmsg is supported
1825 * to send messages between sockets. You will also need struct
1826 * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
1827 */
1828/* HAS_STRUCT_MSGHDR:
1829 * This symbol, if defined, indicates that the struct msghdr
1830 * (BSD 4.3 or 4.4) is supported. You will also need struct
1831 * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
1832 */
1833/* HAS_STRUCT_CMSGHDR:
1834 * This symbol, if defined, indicates that the struct cmsghdr
1835 * (BSD 4.4) is supported. You will also need struct
1836 * iovec from <sys/uio.h>, HAS_STRUCT_IOVEC and I_SYSUIO.
1837 */
1838#define HAS_SOCKET /**/
1839/*#define HAS_SOCKETPAIR /**/
1840/*#define HAS_MSG_CTRUNC /**/
1841/*#define HAS_MSG_DONTROUTE /**/
1842/*#define HAS_MSG_OOB /**/
1843/*#define HAS_MSG_PEEK /**/
1844/*#define HAS_MSG_PROXY / **/
1845/*#define HAS_SCM_RIGHTS /**/
1846/*##define HAS_SENDMSG /**/
1847/*##define HAS_RECVMSG /**/
1848/*##define HAS_STRUCT_MSGHDR /**/
1849/*##define HAS_STRUCT_CMSGHDR /**/
1850
1851/* USE_STAT_BLOCKS:
1852 * This symbol is defined if this system has a stat structure declaring
1853 * st_blksize and st_blocks.
1854 */
1855#define USE_STAT_BLOCKS /**/
1856
1857/* HAS_STRERROR:
1858 * This symbol, if defined, indicates that the strerror routine is
1859 * available to translate error numbers to strings. See the writeup
1860 * of Strerror() in this file before you try to define your own.
1861 */
1862/* HAS_SYS_ERRLIST:
1863 * This symbol, if defined, indicates that the sys_errlist array is
1864 * available to translate error numbers to strings. The extern int
1865 * sys_nerr gives the size of that table.
1866 */
1867/* Strerror:
1868 * This preprocessor symbol is defined as a macro if strerror() is
1869 * not available to translate error numbers to strings but sys_errlist[]
1870 * array is there.
1871 */
1872#define HAS_STRERROR /**/
1873/*##define HAS_SYS_ERRLIST /**/
1874#define Strerror(e) strerror(e)
1875
1876/* HAS_UNION_SEMUN:
1877 * This symbol, if defined, indicates that the union semun is
1878 * defined by including <sys/sem.h>. If not, the user code
1879 * probably needs to define it as:
1880 * union semun {
1881 * int val;
1882 * struct semid_ds *buf;
1883 * unsigned short *array;
1884 * }
1885 */
1886/* USE_SEMCTL_SEMUN:
1887 * This symbol, if defined, indicates that union semun is
1888 * used for semctl IPC_STAT.
1889 */
1890/* USE_SEMCTL_SEMID_DS:
1891 * This symbol, if defined, indicates that struct semid_ds * is
1892 * used for semctl IPC_STAT.
1893 */
1894/*#define HAS_UNION_SEMUN / **/
1895#define USE_SEMCTL_SEMUN /**/
1896#define USE_SEMCTL_SEMID_DS /**/
1897
1898/* HAS_VFORK:
1899 * This symbol, if defined, indicates that vfork() exists.
1900 */
1901/*#define HAS_VFORK / **/
1902
1903/* Signal_t:
1904 * This symbol's value is either "void" or "int", corresponding to the
1905 * appropriate return type of a signal handler. Thus, you can declare
1906 * a signal handler using "Signal_t (*handler)()", and define the
1907 * handler using "Signal_t handler(sig)".
1908 */
1909#define Signal_t void /* Signal handler's return type */
1910
1911/* Groups_t:
1912 * This symbol holds the type used for the second argument to
1913 * getgroups() and setgropus(). Usually, this is the same as
1914 * gidtype (gid_t) , but sometimes it isn't.
1915 * It can be int, ushort, uid_t, etc...
1916 * It may be necessary to include <sys/types.h> to get any
1917 * typedef'ed information. This is only required if you have
1918 * getgroups() or setgropus()..
1919 */
1920#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
1921#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
1922#endif
1923
1924/* I_GRP:
1925 * This symbol, if defined, indicates to the C program that it should
1926 * include <grp.h>.
1927 */
1928/* GRPASSWD:
1929 * This symbol, if defined, indicates to the C program that struct group
1930 * in <grp.h> contains gr_passwd.
1931 */
1932/*##define I_GRP /**/
1933/*##define GRPASSWD /**/
1934
1935/* I_NETDB:
1936 * This symbol, if defined, indicates that <netdb.h> exists and
1937 * should be included.
1938 */
1939#define I_NETDB /**/
1940
1941/* I_PWD:
1942 * This symbol, if defined, indicates to the C program that it should
1943 * include <pwd.h>.
1944 */
1945/* PWQUOTA:
1946 * This symbol, if defined, indicates to the C program that struct passwd
1947 * contains pw_quota.
1948 */
1949/* PWAGE:
1950 * This symbol, if defined, indicates to the C program that struct passwd
1951 * contains pw_age.
1952 */
1953/* PWCHANGE:
1954 * This symbol, if defined, indicates to the C program that struct passwd
1955 * contains pw_change.
1956 */
1957/* PWCLASS:
1958 * This symbol, if defined, indicates to the C program that struct passwd
1959 * contains pw_class.
1960 */
1961/* PWEXPIRE:
1962 * This symbol, if defined, indicates to the C program that struct passwd
1963 * contains pw_expire.
1964 */
1965/* PWCOMMENT:
1966 * This symbol, if defined, indicates to the C program that struct passwd
1967 * contains pw_comment.
1968 */
1969/* PWGECOS:
1970 * This symbol, if defined, indicates to the C program that struct passwd
1971 * contains pw_gecos.
1972 */
1973/* PWPASSWD:
1974 * This symbol, if defined, indicates to the C program that struct passwd
1975 * contains pw_passwd.
1976 */
1977/*#define I_PWD /**/
1978/*#define PWQUOTA /**/
1979/*#define PWAGE / **/
1980/*#define PWCHANGE / **/
1981/*#define PWCLASS / **/
1982/*#define PWEXPIRE / **/
1983/*#define PWCOMMENT /**/
1984/*#define PWGECOS /**/
1985/*#define PWPASSWD /**/
1986
1987/* I_SYSUIO:
1988 * This symbol, if defined, indicates that <sys/uio.h> exists and
1989 * should be included.
1990 */
1991#/*define I_SYSUIO /**/
1992
1993/* Free_t:
1994 * This variable contains the return type of free(). It is usually
1995 * void, but occasionally int.
1996 */
1997/* Malloc_t:
1998 * This symbol is the type of pointer returned by malloc and realloc.
1999 */
2000#define Malloc_t void * /**/
2001#define Free_t void /**/
2002
2003/* MYMALLOC:
2004 * This symbol, if defined, indicates that we're using our own malloc.
2005 */
2006/*#define MYMALLOC / **/
2007
2008/* SIG_NAME:
2009 * This symbol contains a list of signal names in order of
2010 * signal number. This is intended
2011 * to be used as a static array initialization, like this:
2012 * char *sig_name[] = { SIG_NAME };
2013 * The signals in the list are separated with commas, and each signal
2014 * is surrounded by double quotes. There is no leading SIG in the signal
2015 * name, i.e. SIGQUIT is known as "QUIT".
2016 * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
2017 * etc., where nn is the actual signal number (e.g. NUM37).
2018 * The signal number for sig_name[i] is stored in sig_num[i].
2019 * The last element is 0 to terminate the list with a NULL. This
2020 * corresponds to the 0 at the end of the sig_num list.
2021 */
2022/* SIG_NUM:
2023 * This symbol contains a list of signal numbers, in the same order as the
2024 * SIG_NAME list. It is suitable for static array initialization, as in:
2025 * int sig_num[] = { SIG_NUM };
2026 * The signals in the list are separated with commas, and the indices
2027 * within that list and the SIG_NAME list match, so it's easy to compute
2028 * the signal name from a number or vice versa at the price of a small
2029 * dynamic linear lookup.
2030 * Duplicates are allowed, but are moved to the end of the list.
2031 * The signal number corresponding to sig_name[i] is sig_number[i].
2032 * if (i < NSIG) then sig_number[i] == i.
2033 * The last element is 0, corresponding to the 0 at the end of
2034 * the sig_name list.
2035 */
2036#define SIG_NAME "ZERO", 0 /**/
2037#define SIG_NUM 0, 0 /**/
2038
2039/* VOIDFLAGS:
2040 * This symbol indicates how much support of the void type is given by this
2041 * compiler. What various bits mean:
2042 *
2043 * 1 = supports declaration of void
2044 * 2 = supports arrays of pointers to functions returning void
2045 * 4 = supports comparisons between pointers to void functions and
2046 * addresses of void functions
2047 * 8 = suports declaration of generic void pointers
2048 *
2049 * The package designer should define VOIDUSED to indicate the requirements
2050 * of the package. This can be done either by #defining VOIDUSED before
2051 * including config.h, or by defining defvoidused in Myinit.U. If the
2052 * latter approach is taken, only those flags will be tested. If the
2053 * level of void support necessary is not present, defines void to int.
2054 */
2055#ifndef VOIDUSED
2056#define VOIDUSED 15
2057#endif
2058#define VOIDFLAGS 15
2059#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
2060#define void int /* is void to be avoided? */
2061#define M_VOID /* Xenix strikes again */
2062#endif
2063
2064/* ARCHLIB:
2065 * This variable, if defined, holds the name of the directory in
2066 * which the user wants to put architecture-dependent public
2067 * library files for perl5. It is most often a local directory
2068 * such as /usr/local/lib. Programs using this variable must be
2069 * prepared to deal with filename expansion. If ARCHLIB is the
2070 * same as PRIVLIB, it is not defined, since presumably the
2071 * program already searches PRIVLIB.
2072 */
2073/* ARCHLIB_EXP:
2074 * This symbol contains the ~name expanded version of ARCHLIB, to be used
2075 * in programs that are not prepared to deal with ~ expansion at run-time.
2076 */
4792f629
JH
2077#define ARCHLIB "/perl/lib/5.00562/epoc" /**/
2078#define ARCHLIB_EXP "/perl/lib/5.00562/epoc" /**/
4d2c4e07
OF
2079
2080/* DLSYM_NEEDS_UNDERSCORE:
2081 * This symbol, if defined, indicates that we need to prepend an
2082 * underscore to the symbol name before calling dlsym(). This only
2083 * makes sense if you *have* dlsym, which we will presume is the
2084 * case if you're using dl_dlopen.xs.
2085 */
2086/*#define DLSYM_NEEDS_UNDERSCORE / **/
2087
2088/* HAS_FSEEKO:
2089 * This symbol, if defined, indicates that the fseeko routine is
2090 * available to fseek beyond 32 bits (useful for ILP32 hosts).
2091 */
2092/*#define HAS_FSEEKO / **/
2093
2094/* HAS_FTELLO:
2095 * This symbol, if defined, indicates that the ftello routine is
2096 * available to ftell from beyond 32 bits (useful for ILP32 hosts).
2097 */
2098/*#define HAS_FTELLO / **/
2099
2100/* HAS_GETMNTENT:
2101 * This symbol, if defined, indicates that the getmntent routine is
2102 * available to iterate through mounted file systems.
2103 */
2104/*#define HAS_GETMNTENT / **/
2105
2106/* HAS_HASMNTOPT:
2107 * This symbol, if defined, indicates that the hasmntopt routine is
2108 * available to query the mount options of file systems.
2109 */
2110/*#define HAS_HASMNTOPT / **/
2111
2112/* HAS_MADVISE:
2113 * This symbol, if defined, indicates that the madvise system call is
2114 * available to map a file into memory.
2115 */
2116/*#define HAS_MADVISE /**/
2117
2118/* HAS_MPROTECT:
2119 * This symbol, if defined, indicates that the mprotect system call is
2120 * available to modify the access protection of a memory mapped file.
2121 */
2122/*#define HAS_MPROTECT /**/
2123
2124/* HAS_READV:
2125 * This symbol, if defined, indicates that the readv routine is
2126 * available to do gather reads. You will also need <sys/uio.h>
2127 * and there I_SYSUIO.
2128 */
2129/*#define HAS_READV /**/
2130
2131/* USE_SFIO:
2132 * This symbol, if defined, indicates that sfio should
2133 * be used.
2134 */
2135/*#define USE_SFIO / **/
2136
2137/* HAS_FSTATFS:
2138 * This symbol, if defined, indicates that the fstatfs routine is
2139 * available to stat filesystems of file descriptors.
2140 */
2141/* HAS_STRUCT_STATFS_FLAGS:
2142 * This symbol, if defined, indicates that the struct statfs
2143 * does have the f_flags member containing the mount flags of
2144 * the filesystem holding the file.
2145 * This kind of struct statfs is coming from sys/mount.h (BSD),
2146 * not from sys/statfs.h (SYSV).
2147 */
2148#define HAS_FSTATFS /**/
2149#define HAS_STRUCT_STATFS_FLAGS /**/
2150
2151/* HAS_FSTATVFS:
2152 * This symbol, if defined, indicates that the fstatvfs routine is
2153 * available to stat filesystems of file descriptors.
2154 */
2155/*#define HAS_FSTATVFS /**/
2156
2157/* HAS_TELLDIR_PROTO:
2158 * This symbol, if defined, indicates that the system provides
2159 * a prototype for the telldir() function. Otherwise, it is up
2160 * to the program to supply one. A good guess is
2161 * extern long telldir _((DIR*));
2162 */
2163#define HAS_TELLDIR_PROTO /**/
2164
2165/* HAS_WRITEV:
2166 * This symbol, if defined, indicates that the writev routine is
2167 * available to do scatter writes.
2168 */
2169/*#define HAS_WRITEV /**/
2170
4d2c4e07
OF
2171/* USE_DYNAMIC_LOADING:
2172 * This symbol, if defined, indicates that dynamic loading of
2173 * some sort is available.
2174 */
2175/*#define USE_DYNAMIC_LOADING /**/
2176
2177/* FFLUSH_NULL:
2178 * This symbol, if defined, tells that fflush(NULL) does flush
2179 * all pending stdio output.
2180 */
2181/* FFLUSH_ALL:
2182 * This symbol, if defined, tells that to flush
2183 * all pending stdio output one must loop through all
2184 * the stdio file handles stored in an array and fflush them.
2185 * Note that if fflushNULL is defined, fflushall will not
2186 * even be probed for and will be left undefined.
2187 */
2188/*#define FFLUSH_NULL /**/
2189#define FFLUSH_ALL / **/
2190
2191/* DB_Prefix_t:
2192 * This symbol contains the type of the prefix structure element
2193 * in the <db.h> header file. In older versions of DB, it was
2194 * int, while in newer ones it is u_int32_t.
2195 */
2196/* DB_Hash_t:
2197 * This symbol contains the type of the prefix structure element
2198 * in the <db.h> header file. In older versions of DB, it was
2199 * int, while in newer ones it is size_t.
2200 */
2201/*#define DB_Hash_t u_int32_t /**/
2202/*#define DB_Prefix_t size_t /**/
2203
2204/* I_INTTYPES:
2205 * This symbol, if defined, indicates to the C program that it should
2206 * include <inttypes.h>.
2207 */
2208/* HAS_INT64_T:
2209 * This symbol will defined if the C compiler supports int64_t.
2210 * Usually the <inttypes.h> needs to be included, but sometimes
2211 * <sys/types.h> is enough.
2212 */
2213/*#define I_INTTYPES / **/
2214/*#define HAS_INT64_T / **/
2215
2216/* I_MNTENT:
2217 * This symbol, if defined, indicates that <mntent.h> exists and
2218 * should be included.
2219 */
2220/*#define I_MNTENT / **/
2221
2222/* I_NETINET_TCP:
2223 * This symbol, if defined, indicates to the C program that it should
2224 * include <netinet/tcp.h>.
2225 */
2226#define I_NETINET_TCP /**/
2227
2228/* I_POLL:
2229 * This symbol, if defined, indicates that <poll.h> exists and
2230 * should be included.
2231 */
2232/*#define I_POLL /**/
2233
2234/* I_SYS_MMAN:
2235 * This symbol, if defined, indicates that <sys/mman.h> exists and
2236 * should be included.
2237 */
2238/*#define I_SYS_MMAN /**/
2239
2240/* I_SYS_MOUNT:
2241 * This symbol, if defined, indicates that <sys/mount.h> exists and
2242 * should be included.
2243 */
2244/*#define I_SYS_MOUNT /**/
2245
2246/* I_SYS_STATVFS:
2247 * This symbol, if defined, indicates that <sys/statvfs.h> exists and
2248 * should be included.
2249 */
2250/*#define I_SYS_STATVFS /**/
2251
2252/* INSTALL_USR_BIN_PERL:
2253 * This symbol, if defined, indicates that Perl is to be installed
2254 * also as /usr/bin/perl.
2255 */
2256/*#define INSTALL_USR_BIN_PERL /**/
2257
4d2c4e07
OF
2258/* PRIVLIB:
2259 * This symbol contains the name of the private library for this package.
2260 * The library is private in the sense that it needn't be in anyone's
2261 * execution path, but it should be accessible by the world. The program
2262 * should be prepared to do ~ expansion.
2263 */
2264/* PRIVLIB_EXP:
2265 * This symbol contains the ~name expanded version of PRIVLIB, to be used
2266 * in programs that are not prepared to deal with ~ expansion at run-time.
2267 */
4792f629
JH
2268#define PRIVLIB "/perl/lib/5.00562" /**/
2269#define PRIVLIB_EXP "/perl/lib/5.00562" /**/
4d2c4e07
OF
2270
2271/* SELECT_MIN_BITS:
2272 * This symbol holds the minimum number of bits operated by select.
2273 * That is, if you do select(n, ...), how many bits at least will be
2274 * cleared in the masks if some activity is detected. Usually this
2275 * is either n or 32*ceil(n/32), especially many little-endians do
2276 * the latter. This is only useful if you have select(), naturally.
2277 */
2278#define SELECT_MIN_BITS 32 /**/
2279
2280/* SITEARCH:
2281 * This symbol contains the name of the private library for this package.
2282 * The library is private in the sense that it needn't be in anyone's
2283 * execution path, but it should be accessible by the world. The program
2284 * should be prepared to do ~ expansion.
2285 * The standard distribution will put nothing in this directory.
2286 * Individual sites may place their own extensions and modules in
2287 * this directory.
2288 */
2289/* SITEARCH_EXP:
2290 * This symbol contains the ~name expanded version of SITEARCH, to be used
2291 * in programs that are not prepared to deal with ~ expansion at run-time.
2292 */
4792f629
JH
2293#define SITEARCH "/perl/lib/site_perl/5.00562/epoc" /**/
2294#define SITEARCH_EXP "/perl/lib/site_perl/5.00562/epoc" /**/
4d2c4e07
OF
2295
2296/* SITELIB:
2297 * This symbol contains the name of the private library for this package.
2298 * The library is private in the sense that it needn't be in anyone's
2299 * execution path, but it should be accessible by the world. The program
2300 * should be prepared to do ~ expansion.
2301 * The standard distribution will put nothing in this directory.
2302 * Individual sites may place their own extensions and modules in
2303 * this directory.
2304 */
2305/* SITELIB_EXP:
2306 * This symbol contains the ~name expanded version of SITELIB, to be used
2307 * in programs that are not prepared to deal with ~ expansion at run-time.
2308 */
4792f629
JH
2309#define SITELIB "/perl/lib/site_perl/5.00562" /**/
2310#define SITELIB_EXP "/perl/lib/site_perl/5.00562" /**/
4d2c4e07
OF
2311
2312/* STARTPERL:
2313 * This variable contains the string to put in front of a perl
2314 * script to make sure (one hopes) that it runs with perl and not
2315 * some shell.
2316 */
2317#define STARTPERL "#!/opt/perl/bin/perl" /**/
2318
4d2c4e07
OF
2319/* HAS_STDIO_STREAM_ARRAY:
2320 * This symbol, if defined, tells that there is an array
2321 * holding the stdio streams.
2322 */
2323/* STDIO_STREAM_ARRAY:
2324 * This symbol tells the name of the array holding the stdio streams.
2325 * Usual values include _iob, __iob, and __sF.
2326 */
2327/*#define HAS_STDIO_STREAM_ARRAY /**/
2328/*#define STDIO_STREAM_ARRAY _iob
2329
2330/* USE_64_BITS:
2331 * This symbol, if defined, indicates that 64-bit interfaces should
2332 * be used when available. If not defined, the native default interfaces
2333 * will be used (be they 32 or 64 bits).
2334 */
2335/*#define USE_64_BITS /**/
2336
2337/* MULTIPLICITY:
2338 * This symbol, if defined, indicates that Perl should
2339 * be built to use multiplicity.
2340 */
2341/*#define MULTIPLICITY / **/
2342
2343/* USE_PERLIO:
2344 * This symbol, if defined, indicates that the PerlIO abstraction should
2345 * be used throughout. If not defined, stdio should be
2346 * used in a fully backward compatible manner.
2347 */
2348/*#define USE_PERLIO / **/
2349
2350/* HAS_DRAND48_PROTO:
2351 * This symbol, if defined, indicates that the system provides
2352 * a prototype for the drand48() function. Otherwise, it is up
2353 * to the program to supply one. A good guess is
2354 * extern double drand48 _((void));
2355 */
2356#define HAS_DRAND48_PROTO /**/
2357
2358/* HAS_GETHOST_PROTOS:
2359 * This symbol, if defined, indicates that <netdb.h> includes
2360 * prototypes for gethostent(), gethostbyname(), and
2361 * gethostbyaddr(). Otherwise, it is up to the program to guess
2362 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
2363 */
2364#define HAS_GETHOST_PROTOS /**/
2365
2366/* HAS_GETNET_PROTOS:
2367 * This symbol, if defined, indicates that <netdb.h> includes
2368 * prototypes for getnetent(), getnetbyname(), and
2369 * getnetbyaddr(). Otherwise, it is up to the program to guess
2370 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
2371 */
2372#define HAS_GETNET_PROTOS /**/
2373
2374/* HAS_GETPROTO_PROTOS:
2375 * This symbol, if defined, indicates that <netdb.h> includes
2376 * prototypes for getprotoent(), getprotobyname(), and
2377 * getprotobyaddr(). Otherwise, it is up to the program to guess
2378 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
2379 */
2380#define HAS_GETPROTO_PROTOS /**/
2381
2382/* HAS_GETSERV_PROTOS:
2383 * This symbol, if defined, indicates that <netdb.h> includes
2384 * prototypes for getservent(), getservbyname(), and
2385 * getservbyaddr(). Otherwise, it is up to the program to guess
2386 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
2387 */
2388#define HAS_GETSERV_PROTOS /**/
2389
2390/* Netdb_host_t:
2391 * This symbol holds the type used for the 1st argument
2392 * to gethostbyaddr().
2393 */
2394/* Netdb_hlen_t:
2395 * This symbol holds the type used for the 2nd argument
2396 * to gethostbyaddr().
2397 */
2398/* Netdb_name_t:
2399 * This symbol holds the type used for the argument to
2400 * gethostbyname().
2401 */
2402/* Netdb_net_t:
2403 * This symbol holds the type used for the 1st argument to
2404 * getnetbyaddr().
2405 */
2406#define Netdb_host_t const char * /**/
2407#define Netdb_hlen_t int /**/
2408#define Netdb_name_t const char * /**/
2409#define Netdb_net_t int /**/
2410
2411/* Select_fd_set_t:
2412 * This symbol holds the type used for the 2nd, 3rd, and 4th
2413 * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
2414 * is defined, and 'int *' otherwise. This is only useful if you
2415 * have select(), of course.
2416 */
2417#define Select_fd_set_t fd_set * /**/
2418
2419/* ARCHNAME:
2420 * This symbol holds a string representing the architecture name.
2421 * It may be used to construct an architecture-dependant pathname
2422 * where library files may be held under a private library, for
2423 * instance.
2424 */
2425#define ARCHNAME "epoc" /**/
2426
2427/* OLD_PTHREAD_CREATE_JOINABLE:
2428 * This symbol, if defined, indicates how to create pthread
2429 * in joinable (aka undetached) state. NOTE: not defined
2430 * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
2431 * (the new version of the constant).
2432 * If defined, known values are PTHREAD_CREATE_UNDETACHED
2433 * and __UNDETACHED.
2434 */
2435/*#define OLD_PTHREAD_CREATE_JOINABLE / **/
2436
2437/* HAS_PTHREAD_YIELD:
2438 * This symbol, if defined, indicates that the pthread_yield
2439 * routine is available to yield the execution of the current
2440 * thread. sched_yield is preferable to pthread_yield.
2441 */
2442/* SCHED_YIELD:
2443 * This symbol defines the way to yield the execution of
2444 * the current thread. Known ways are sched_yield,
2445 * pthread_yield, and pthread_yield with NULL.
2446 */
2447/* HAS_SCHED_YIELD:
2448 * This symbol, if defined, indicates that the sched_yield
2449 * routine is available to yield the execution of the current
2450 * thread. sched_yield is preferable to pthread_yield.
2451 */
2452/*#define HAS_PTHREAD_YIELD / **/
2453/*#define SCHED_YIELD sched_yield() /**/
2454/*#define HAS_SCHED_YIELD /**/
2455
2456/* I_MACH_CTHREADS:
2457 * This symbol, if defined, indicates to the C program that it should
2458 * include <mach/cthreads.h>.
2459 */
2460/*#define I_MACH_CTHREADS / **/
2461
2462/* USE_THREADS:
2463 * This symbol, if defined, indicates that Perl should
2464 * be built to use threads.
2465 */
2466/* OLD_PTHREADS_API:
2467 * This symbol, if defined, indicates that Perl should
2468 * be built to use the old draft POSIX threads API.
2469 */
2470/*#define USE_THREADS /**/
2471/*#define OLD_PTHREADS_API / **/
2472
2473/* Time_t:
2474 * This symbol holds the type returned by time(). It can be long,
2475 * or time_t on BSD sites (in which case <sys/types.h> should be
2476 * included).
2477 */
2478#define Time_t time_t /* Time type */
2479
2480/* HAS_TIMES:
2481 * This symbol, if defined, indicates that the times() routine exists.
2482 * Note that this became obsolete on some systems (SUNOS), which now
2483 * use getrusage(). It may be necessary to include <sys/times.h>.
2484 */
2485/*#define HAS_TIMES /**/
2486
2487/* Fpos_t:
2488 * This symbol holds the type used to declare file positions in libc.
2489 * It can be fpos_t, long, uint, etc... It may be necessary to include
2490 * <sys/types.h> to get any typedef'ed information.
2491 */
2492#define Fpos_t fpos_t /* File position type */
2493
2494/* Gid_t:
2495 * This symbol holds the return type of getgid() and the type of
2496 * argument to setrgid() and related functions. Typically,
2497 * it is the type of group ids in the kernel. It can be int, ushort,
2498 * uid_t, etc... It may be necessary to include <sys/types.h> to get
2499 * any typedef'ed information.
2500 */
2501#define Gid_t gid_t /* Type for getgid(), etc... */
2502
2503/* Off_t:
2504 * This symbol holds the type used to declare offsets in the kernel.
2505 * It can be int, long, off_t, etc... It may be necessary to include
2506 * <sys/types.h> to get any typedef'ed information.
2507 */
2508/* LSEEKSIZE:
2509 * This symbol holds the number of bytes used by the Off_t.
2510 */
2511#define Off_t off_t /* <offset> type */
2512#define LSEEKSIZE 8 /* <offset> size */
2513
2514/* Mode_t:
2515 * This symbol holds the type used to declare file modes
2516 * for systems calls. It is usually mode_t, but may be
2517 * int or unsigned short. It may be necessary to include <sys/types.h>
2518 * to get any typedef'ed information.
2519 */
2520#define Mode_t mode_t /* file mode parameter for system calls */
2521
2522/* Pid_t:
2523 * This symbol holds the type used to declare process ids in the kernel.
2524 * It can be int, uint, pid_t, etc... It may be necessary to include
2525 * <sys/types.h> to get any typedef'ed information.
2526 */
2527#define Pid_t pid_t /* PID type */
2528
2529/* Size_t:
2530 * This symbol holds the type used to declare length parameters
2531 * for string functions. It is usually size_t, but may be
2532 * unsigned long, int, etc. It may be necessary to include
2533 * <sys/types.h> to get any typedef'ed information.
2534 */
2535#define Size_t size_t /* length paramater for string functions */
2536
2537/* Uid_t:
2538 * This symbol holds the type used to declare user ids in the kernel.
2539 * It can be int, ushort, uid_t, etc... It may be necessary to include
2540 * <sys/types.h> to get any typedef'ed information.
2541 */
2542#define Uid_t uid_t /* UID type */
2543
ae2d1787
OF
2544/* PERL_PRIfldbl:
2545 * This symbol, if defined, contains the string used by stdio to
2546 * format long doubles (format 'f') for output.
2547 */
2548/* PERL_PRIgldbl:
2549 * This symbol, if defined, contains the string used by stdio to
2550 * format long doubles (format 'g') for output.
2551 */
2552#define PERL_PRIfldbl "f" /**/
2553#define PERL_PRIgldbl "g" /**/
2554
4d2c4e07 2555#endif
ae2d1787 2556