This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
microperl nits from Simon Cozens.
[perl5.git] / uconfig.h
CommitLineData
3ebb1980
JH
1/*
2 * This file was produced by running the config_h.SH script, which
3 * gets its values from uconfig.sh, which is generally produced by
4 * running Configure.
5 *
6 * Feel free to modify any of this as the need arises. Note, however,
7 * that running config_h.SH again will wipe out any changes you've made.
8 * For a more permanent change edit uconfig.sh and rerun config_h.SH.
9 *
10 * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
11 */
12
13/*
14 * Package name :
15 * Source directory :
16 * Configuration time:
17 * Configured by :
18 * Target system : unknown
19 */
20
21#ifndef _config_h_
22#define _config_h_
23
24/* LOC_SED:
25 * This symbol holds the complete pathname to the sed program.
26 */
27#define LOC_SED "" /**/
28
29/* HAS_ALARM:
30 * This symbol, if defined, indicates that the alarm routine is
31 * available.
32 */
33/*#define HAS_ALARM / **/
34
35/* HASATTRIBUTE:
36 * This symbol indicates the C compiler can check for function attributes,
37 * such as printf formats. This is normally only supported by GNU cc.
38 */
39/*#define HASATTRIBUTE / **/
40#ifndef HASATTRIBUTE
41#define __attribute__(_arg_)
42#endif
43
44/* HAS_BCMP:
45 * This symbol is defined if the bcmp() routine is available to
46 * compare blocks of memory.
47 */
48/*#define HAS_BCMP / **/
49
50/* HAS_BCOPY:
51 * This symbol is defined if the bcopy() routine is available to
52 * copy blocks of memory.
53 */
54/*#define HAS_BCOPY / **/
55
56/* HAS_BZERO:
57 * This symbol is defined if the bzero() routine is available to
58 * set a memory block to 0.
59 */
60/*#define HAS_BZERO / **/
61
62/* HAS_CHOWN:
63 * This symbol, if defined, indicates that the chown routine is
64 * available.
65 */
66/*#define HAS_CHOWN / **/
67
68/* HAS_CHROOT:
69 * This symbol, if defined, indicates that the chroot routine is
70 * available.
71 */
72/*#define HAS_CHROOT / **/
73
74/* HAS_CHSIZE:
75 * This symbol, if defined, indicates that the chsize routine is available
76 * to truncate files. You might need a -lx to get this routine.
77 */
78/*#define HAS_CHSIZE / **/
79
80/* HASCONST:
81 * This symbol, if defined, indicates that this C compiler knows about
82 * the const type. There is no need to actually test for that symbol
83 * within your programs. The mere use of the "const" keyword will
84 * trigger the necessary tests.
85 */
86/*#define HASCONST / **/
87#ifndef HASCONST
88#define const
89#endif
90
91/* HAS_CRYPT:
92 * This symbol, if defined, indicates that the crypt routine is available
93 * to encrypt passwords and the like.
94 */
95/*#define HAS_CRYPT / **/
96
97/* HAS_CUSERID:
98 * This symbol, if defined, indicates that the cuserid routine is
99 * available to get character login names.
100 */
101/*#define HAS_CUSERID / **/
102
103/* HAS_DBL_DIG:
104 * This symbol, if defined, indicates that this system's <float.h>
105 * or <limits.h> defines the symbol DBL_DIG, which is the number
106 * of significant digits in a double precision number. If this
107 * symbol is not defined, a guess of 15 is usually pretty good.
108 */
109/*#define HAS_DBL_DIG / * */
110
111/* HAS_DIFFTIME:
112 * This symbol, if defined, indicates that the difftime routine is
113 * available.
114 */
115/*#define HAS_DIFFTIME / **/
116
117/* HAS_DLERROR:
118 * This symbol, if defined, indicates that the dlerror routine is
119 * available to return a string describing the last error that
120 * occurred from a call to dlopen(), dlclose() or dlsym().
121 */
122/*#define HAS_DLERROR / **/
123
124/* SETUID_SCRIPTS_ARE_SECURE_NOW:
125 * This symbol, if defined, indicates that the bug that prevents
126 * setuid scripts from being secure is not present in this kernel.
127 */
128/* DOSUID:
129 * This symbol, if defined, indicates that the C program should
130 * check the script that it is executing for setuid/setgid bits, and
131 * attempt to emulate setuid/setgid on systems that have disabled
132 * setuid #! scripts because the kernel can't do it securely.
133 * It is up to the package designer to make sure that this emulation
134 * is done securely. Among other things, it should do an fstat on
135 * the script it just opened to make sure it really is a setuid/setgid
136 * script, it should make sure the arguments passed correspond exactly
137 * to the argument on the #! line, and it should not trust any
138 * subprocesses to which it must pass the filename rather than the
139 * file descriptor of the script to be executed.
140 */
141/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
142/*#define DOSUID / **/
143
144/* HAS_DUP2:
145 * This symbol, if defined, indicates that the dup2 routine is
146 * available to duplicate file descriptors.
147 */
148/*#define HAS_DUP2 / **/
149
150/* HAS_FCHMOD:
151 * This symbol, if defined, indicates that the fchmod routine is available
152 * to change mode of opened files. If unavailable, use chmod().
153 */
154/*#define HAS_FCHMOD / **/
155
156/* HAS_FCHOWN:
157 * This symbol, if defined, indicates that the fchown routine is available
158 * to change ownership of opened files. If unavailable, use chown().
159 */
160/*#define HAS_FCHOWN / **/
161
162/* HAS_FCNTL:
163 * This symbol, if defined, indicates to the C program that
164 * the fcntl() function exists.
165 */
166/*#define HAS_FCNTL / **/
167
168/* HAS_FGETPOS:
169 * This symbol, if defined, indicates that the fgetpos routine is
170 * available to get the file position indicator, similar to ftell().
171 */
172/*#define HAS_FGETPOS / **/
173
174/* HAS_FLOCK:
175 * This symbol, if defined, indicates that the flock routine is
176 * available to do file locking.
177 */
178/*#define HAS_FLOCK / **/
179
180/* HAS_FORK:
181 * This symbol, if defined, indicates that the fork routine is
182 * available.
183 */
184#define HAS_FORK /**/
185
186/* HAS_FSETPOS:
187 * This symbol, if defined, indicates that the fsetpos routine is
188 * available to set the file position indicator, similar to fseek().
189 */
190/*#define HAS_FSETPOS / **/
191
192/* HAS_GETTIMEOFDAY:
193 * This symbol, if defined, indicates that the gettimeofday() system
194 * call is available for a sub-second accuracy clock. Usually, the file
195 * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
196 * The type "Timeval" should be used to refer to "struct timeval".
197 */
198/*#define HAS_GETTIMEOFDAY / **/
199#ifdef HAS_GETTIMEOFDAY
200#define Timeval struct timeval /* Structure used by gettimeofday() */
201#endif
202
203/* HAS_GETGROUPS:
204 * This symbol, if defined, indicates that the getgroups() routine is
205 * available to get the list of process groups. If unavailable, multiple
206 * groups are probably not supported.
207 */
208/*#define HAS_GETGROUPS / **/
209
210/* HAS_GETLOGIN:
211 * This symbol, if defined, indicates that the getlogin routine is
212 * available to get the login name.
213 */
214/*#define HAS_GETLOGIN / **/
215
216/* HAS_GETPGID:
217 * This symbol, if defined, indicates to the C program that
218 * the getpgid(pid) function is available to get the
219 * process group id.
220 */
221/*#define HAS_GETPGID / **/
222
223/* HAS_GETPGRP:
224 * This symbol, if defined, indicates that the getpgrp routine is
225 * available to get the current process group.
226 */
227/* USE_BSD_GETPGRP:
228 * This symbol, if defined, indicates that getpgrp needs one
229 * arguments whereas USG one needs none.
230 */
231/*#define HAS_GETPGRP / **/
232/*#define USE_BSD_GETPGRP / **/
233
234/* HAS_GETPGRP2:
235 * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
236 * routine is available to get the current process group.
237 */
238/*#define HAS_GETPGRP2 / **/
239
240/* HAS_GETPPID:
241 * This symbol, if defined, indicates that the getppid routine is
242 * available to get the parent process ID.
243 */
244/*#define HAS_GETPPID / **/
245
246/* HAS_GETPRIORITY:
247 * This symbol, if defined, indicates that the getpriority routine is
248 * available to get a process's priority.
249 */
250/*#define HAS_GETPRIORITY / **/
251
252/* HAS_INET_ATON:
253 * This symbol, if defined, indicates to the C program that the
254 * inet_aton() function is available to parse IP address "dotted-quad"
255 * strings.
256 */
257/*#define HAS_INET_ATON / **/
258
259/* HAS_KILLPG:
260 * This symbol, if defined, indicates that the killpg routine is available
261 * to kill process groups. If unavailable, you probably should use kill
262 * with a negative process number.
263 */
264/*#define HAS_KILLPG / **/
265
266/* HAS_LINK:
267 * This symbol, if defined, indicates that the link routine is
268 * available to create hard links.
269 */
270/*#define HAS_LINK / **/
271
272/* HAS_LOCALECONV:
273 * This symbol, if defined, indicates that the localeconv routine is
274 * available for numeric and monetary formatting conventions.
275 */
276/*#define HAS_LOCALECONV / **/
277
278/* HAS_LOCKF:
279 * This symbol, if defined, indicates that the lockf routine is
280 * available to do file locking.
281 */
282/*#define HAS_LOCKF / **/
283
284/* HAS_LSTAT:
285 * This symbol, if defined, indicates that the lstat routine is
286 * available to do file stats on symbolic links.
287 */
288/*#define HAS_LSTAT / **/
289
290/* HAS_MBLEN:
291 * This symbol, if defined, indicates that the mblen routine is available
292 * to find the number of bytes in a multibye character.
293 */
294/*#define HAS_MBLEN / **/
295
296/* HAS_MBSTOWCS:
297 * This symbol, if defined, indicates that the mbstowcs routine is
298 * available to covert a multibyte string into a wide character string.
299 */
300/*#define HAS_MBSTOWCS / **/
301
302/* HAS_MBTOWC:
303 * This symbol, if defined, indicates that the mbtowc routine is available
304 * to covert a multibyte to a wide character.
305 */
306/*#define HAS_MBTOWC / **/
307
308/* HAS_MEMCMP:
309 * This symbol, if defined, indicates that the memcmp routine is available
310 * to compare blocks of memory.
311 */
312/*#define HAS_MEMCMP / **/
313
314/* HAS_MEMCPY:
315 * This symbol, if defined, indicates that the memcpy routine is available
316 * to copy blocks of memory.
317 */
318/*#define HAS_MEMCPY / **/
319
320/* HAS_MEMMOVE:
321 * This symbol, if defined, indicates that the memmove routine is available
322 * to copy potentially overlapping blocks of memory. This should be used
323 * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
324 * own version.
325 */
326/*#define HAS_MEMMOVE / **/
327
328/* HAS_MEMSET:
329 * This symbol, if defined, indicates that the memset routine is available
330 * to set blocks of memory.
331 */
332/*#define HAS_MEMSET / **/
333
334/* HAS_MKDIR:
335 * This symbol, if defined, indicates that the mkdir routine is available
336 * to create directories. Otherwise you should fork off a new process to
337 * exec /bin/mkdir.
338 */
339/*#define HAS_MKDIR / **/
340
341/* HAS_MKFIFO:
342 * This symbol, if defined, indicates that the mkfifo routine is
343 * available to create FIFOs. Otherwise, mknod should be able to
344 * do it for you. However, if mkfifo is there, mknod might require
345 * super-user privileges which mkfifo will not.
346 */
347/*#define HAS_MKFIFO / **/
348
349/* HAS_MKTIME:
350 * This symbol, if defined, indicates that the mktime routine is
351 * available.
352 */
353/*#define HAS_MKTIME / **/
354
355/* HAS_MSYNC:
356 * This symbol, if defined, indicates that the msync system call is
357 * available to synchronize a mapped file.
358 */
359/*#define HAS_MSYNC / **/
360
361/* HAS_MUNMAP:
362 * This symbol, if defined, indicates that the munmap system call is
363 * available to unmap a region, usually mapped by mmap().
364 */
365/*#define HAS_MUNMAP / **/
366
367/* HAS_NICE:
368 * This symbol, if defined, indicates that the nice routine is
369 * available.
370 */
371/*#define HAS_NICE / **/
372
373/* HAS_PATHCONF:
374 * This symbol, if defined, indicates that pathconf() is available
375 * to determine file-system related limits and options associated
376 * with a given filename.
377 */
378/* HAS_FPATHCONF:
379 * This symbol, if defined, indicates that pathconf() is available
380 * to determine file-system related limits and options associated
381 * with a given open file descriptor.
382 */
383/*#define HAS_PATHCONF / **/
384/*#define HAS_FPATHCONF / **/
385
386/* HAS_PAUSE:
387 * This symbol, if defined, indicates that the pause routine is
388 * available to suspend a process until a signal is received.
389 */
390/*#define HAS_PAUSE / **/
391
392/* HAS_PIPE:
393 * This symbol, if defined, indicates that the pipe routine is
394 * available to create an inter-process channel.
395 */
396/*#define HAS_PIPE / **/
397
398/* HAS_POLL:
399 * This symbol, if defined, indicates that the poll routine is
400 * available to poll active file descriptors. You may safely
401 * include <poll.h> when this symbol is defined.
402 */
403/*#define HAS_POLL / **/
404
405/* HAS_READDIR:
406 * This symbol, if defined, indicates that the readdir routine is
407 * available to read directory entries. You may have to include
408 * <dirent.h>. See I_DIRENT.
409 */
410/*#define HAS_READDIR / **/
411
412/* HAS_SEEKDIR:
413 * This symbol, if defined, indicates that the seekdir routine is
414 * available. You may have to include <dirent.h>. See I_DIRENT.
415 */
416/*#define HAS_SEEKDIR / **/
417
418/* HAS_TELLDIR:
419 * This symbol, if defined, indicates that the telldir routine is
420 * available. You may have to include <dirent.h>. See I_DIRENT.
421 */
422/*#define HAS_TELLDIR / **/
423
424/* HAS_REWINDDIR:
425 * This symbol, if defined, indicates that the rewinddir routine is
426 * available. You may have to include <dirent.h>. See I_DIRENT.
427 */
428/*#define HAS_REWINDDIR / **/
429
430/* HAS_READLINK:
431 * This symbol, if defined, indicates that the readlink routine is
432 * available to read the value of a symbolic link.
433 */
434/*#define HAS_READLINK / **/
435
436/* HAS_RENAME:
437 * This symbol, if defined, indicates that the rename routine is available
438 * to rename files. Otherwise you should do the unlink(), link(), unlink()
439 * trick.
440 */
441/*#define HAS_RENAME / **/
442
443/* HAS_RMDIR:
444 * This symbol, if defined, indicates that the rmdir routine is
445 * available to remove directories. Otherwise you should fork off a
446 * new process to exec /bin/rmdir.
447 */
448/*#define HAS_RMDIR / **/
449
450/* HAS_SELECT:
451 * This symbol, if defined, indicates that the select routine is
452 * available to select active file descriptors. If the timeout field
453 * is used, <sys/time.h> may need to be included.
454 */
455/*#define HAS_SELECT / **/
456
457/* HAS_SETEGID:
458 * This symbol, if defined, indicates that the setegid routine is available
459 * to change the effective gid of the current program.
460 */
461/*#define HAS_SETEGID / **/
462
463/* HAS_SETEUID:
464 * This symbol, if defined, indicates that the seteuid routine is available
465 * to change the effective uid of the current program.
466 */
467/*#define HAS_SETEUID / **/
468
469/* HAS_SETLINEBUF:
470 * This symbol, if defined, indicates that the setlinebuf routine is
471 * available to change stderr or stdout from block-buffered or unbuffered
472 * to a line-buffered mode.
473 */
474/*#define HAS_SETLINEBUF / **/
475
476/* HAS_SETLOCALE:
477 * This symbol, if defined, indicates that the setlocale routine is
478 * available to handle locale-specific ctype implementations.
479 */
480/*#define HAS_SETLOCALE / **/
481
482/* HAS_SETPGID:
483 * This symbol, if defined, indicates that the setpgid(pid, gpid)
484 * routine is available to set process group ID.
485 */
486/*#define HAS_SETPGID / **/
487
488/* HAS_SETPGRP:
489 * This symbol, if defined, indicates that the setpgrp routine is
490 * available to set the current process group.
491 */
492/* USE_BSD_SETPGRP:
493 * This symbol, if defined, indicates that setpgrp needs two
494 * arguments whereas USG one needs none. See also HAS_SETPGID
495 * for a POSIX interface.
496 */
497/*#define HAS_SETPGRP / **/
498/*#define USE_BSD_SETPGRP / **/
499
500/* HAS_SETPGRP2:
501 * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
502 * routine is available to set the current process group.
503 */
504/*#define HAS_SETPGRP2 / **/
505
506/* HAS_SETPRIORITY:
507 * This symbol, if defined, indicates that the setpriority routine is
508 * available to set a process's priority.
509 */
510/*#define HAS_SETPRIORITY / **/
511
512/* HAS_SETREGID:
513 * This symbol, if defined, indicates that the setregid routine is
514 * available to change the real and effective gid of the current
515 * process.
516 */
517/* HAS_SETRESGID:
518 * This symbol, if defined, indicates that the setresgid routine is
519 * available to change the real, effective and saved gid of the current
520 * process.
521 */
522/*#define HAS_SETREGID / **/
523/*#define HAS_SETRESGID / **/
524
525/* HAS_SETREUID:
526 * This symbol, if defined, indicates that the setreuid routine is
527 * available to change the real and effective uid of the current
528 * process.
529 */
530/* HAS_SETRESUID:
531 * This symbol, if defined, indicates that the setresuid routine is
532 * available to change the real, effective and saved uid of the current
533 * process.
534 */
535/*#define HAS_SETREUID / **/
536/*#define HAS_SETRESUID / **/
537
538/* HAS_SETRGID:
539 * This symbol, if defined, indicates that the setrgid routine is available
540 * to change the real gid of the current program.
541 */
542/*#define HAS_SETRGID / **/
543
544/* HAS_SETRUID:
545 * This symbol, if defined, indicates that the setruid routine is available
546 * to change the real uid of the current program.
547 */
548/*#define HAS_SETRUID / **/
549
550/* HAS_SETSID:
551 * This symbol, if defined, indicates that the setsid routine is
552 * available to set the process group ID.
553 */
554/*#define HAS_SETSID / **/
555
556/* Shmat_t:
557 * This symbol holds the return type of the shmat() system call.
558 * Usually set to 'void *' or 'char *'.
559 */
560/* HAS_SHMAT_PROTOTYPE:
561 * This symbol, if defined, indicates that the sys/shm.h includes
562 * a prototype for shmat(). Otherwise, it is up to the program to
563 * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
564 * but not always right so it should be emitted by the program only
565 * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
566 */
567#define Shmat_t void * /**/
568/*#define HAS_SHMAT_PROTOTYPE / **/
569
570/* HAS_STRCHR:
571 * This symbol is defined to indicate that the strchr()/strrchr()
572 * functions are available for string searching. If not, try the
573 * index()/rindex() pair.
574 */
575/* HAS_INDEX:
576 * This symbol is defined to indicate that the index()/rindex()
577 * functions are available for string searching.
578 */
579/*#define HAS_STRCHR / **/
580/*#define HAS_INDEX / **/
581
582/* HAS_STRCOLL:
583 * This symbol, if defined, indicates that the strcoll routine is
584 * available to compare strings using collating information.
585 */
586/*#define HAS_STRCOLL / **/
587
588/* USE_STRUCT_COPY:
589 * This symbol, if defined, indicates that this C compiler knows how
590 * to copy structures. If undefined, you'll need to use a block copy
591 * routine of some sort instead.
592 */
593/*#define USE_STRUCT_COPY / **/
594
595/* HAS_STRTOD:
596 * This symbol, if defined, indicates that the strtod routine is
597 * available to provide better numeric string conversion than atof().
598 */
599/*#define HAS_STRTOD / **/
600
601/* HAS_STRTOL:
602 * This symbol, if defined, indicates that the strtol routine is available
603 * to provide better numeric string conversion than atoi() and friends.
604 */
605/*#define HAS_STRTOL / **/
606
607/* HAS_STRTOUL:
608 * This symbol, if defined, indicates that the strtoul routine is
609 * available to provide conversion of strings to unsigned long.
610 */
611/*#define HAS_STRTOUL / **/
612
613/* HAS_STRXFRM:
614 * This symbol, if defined, indicates that the strxfrm() routine is
615 * available to transform strings.
616 */
617/*#define HAS_STRXFRM / **/
618
619/* HAS_SYMLINK:
620 * This symbol, if defined, indicates that the symlink routine is available
621 * to create symbolic links.
622 */
623/*#define HAS_SYMLINK / **/
624
625/* HAS_SYSCALL:
626 * This symbol, if defined, indicates that the syscall routine is
627 * available to call arbitrary system calls. If undefined, that's tough.
628 */
629/*#define HAS_SYSCALL / **/
630
631/* HAS_SYSCONF:
632 * This symbol, if defined, indicates that sysconf() is available
633 * to determine system related limits and options.
634 */
635/*#define HAS_SYSCONF / **/
636
637/* HAS_SYSTEM:
638 * This symbol, if defined, indicates that the system routine is
639 * available to issue a shell command.
640 */
641/*#define HAS_SYSTEM / **/
642
643/* HAS_TCGETPGRP:
644 * This symbol, if defined, indicates that the tcgetpgrp routine is
645 * available to get foreground process group ID.
646 */
647/*#define HAS_TCGETPGRP / **/
648
649/* HAS_TCSETPGRP:
650 * This symbol, if defined, indicates that the tcsetpgrp routine is
651 * available to set foreground process group ID.
652 */
653/*#define HAS_TCSETPGRP / **/
654
655/* HAS_TRUNCATE:
656 * This symbol, if defined, indicates that the truncate routine is
657 * available to truncate files.
658 */
659/*#define HAS_TRUNCATE / **/
660
661/* HAS_TZNAME:
662 * This symbol, if defined, indicates that the tzname[] array is
663 * available to access timezone names.
664 */
665/*#define HAS_TZNAME / **/
666
667/* HAS_UMASK:
668 * This symbol, if defined, indicates that the umask routine is
669 * available to set and get the value of the file creation mask.
670 */
671/*#define HAS_UMASK / **/
672
673/* HASVOLATILE:
674 * This symbol, if defined, indicates that this C compiler knows about
675 * the volatile declaration.
676 */
677/*#define HASVOLATILE / **/
678#ifndef HASVOLATILE
679#define volatile
680#endif
681
682/* HAS_WAIT4:
683 * This symbol, if defined, indicates that wait4() exists.
684 */
685/*#define HAS_WAIT4 / **/
686
687/* HAS_WAITPID:
688 * This symbol, if defined, indicates that the waitpid routine is
689 * available to wait for child process.
690 */
691/*#define HAS_WAITPID / **/
692
693/* HAS_WCSTOMBS:
694 * This symbol, if defined, indicates that the wcstombs routine is
695 * available to convert wide character strings to multibyte strings.
696 */
697/*#define HAS_WCSTOMBS / **/
698
699/* HAS_WCTOMB:
700 * This symbol, if defined, indicates that the wctomb routine is available
701 * to covert a wide character to a multibyte.
702 */
703/*#define HAS_WCTOMB / **/
704
705/* I_ARPA_INET:
706 * This symbol, if defined, indicates to the C program that it should
707 * include <arpa/inet.h> to get inet_addr and friends declarations.
708 */
709/*#define I_ARPA_INET / **/
710
711/* I_DBM:
712 * This symbol, if defined, indicates that <dbm.h> exists and should
713 * be included.
714 */
715/* I_RPCSVC_DBM:
716 * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
717 * should be included.
718 */
719/*#define I_DBM / **/
720/*#define I_RPCSVC_DBM / **/
721
722/* I_DIRENT:
723 * This symbol, if defined, indicates to the C program that it should
724 * include <dirent.h>. Using this symbol also triggers the definition
725 * of the Direntry_t define which ends up being 'struct dirent' or
726 * 'struct direct' depending on the availability of <dirent.h>.
727 */
728/* DIRNAMLEN:
729 * This symbol, if defined, indicates to the C program that the length
730 * of directory entry names is provided by a d_namlen field. Otherwise
731 * you need to do strlen() on the d_name field.
732 */
733/* Direntry_t:
734 * This symbol is set to 'struct direct' or 'struct dirent' depending on
735 * whether dirent is available or not. You should use this pseudo type to
736 * portably declare your directory entries.
737 */
738/*#define I_DIRENT / **/
739/*#define DIRNAMLEN / **/
740#define Direntry_t struct dirent
741
742/* I_DLFCN:
743 * This symbol, if defined, indicates that <dlfcn.h> exists and should
744 * be included.
745 */
746/*#define I_DLFCN / **/
747
748/* I_FCNTL:
749 * This manifest constant tells the C program to include <fcntl.h>.
750 */
751/*#define I_FCNTL / **/
752
753/* I_FLOAT:
754 * This symbol, if defined, indicates to the C program that it should
755 * include <float.h> to get definition of symbols like DBL_MAX or
756 * DBL_MIN, i.e. machine dependent floating point values.
757 */
758/*#define I_FLOAT / **/
759
760/* I_LIMITS:
761 * This symbol, if defined, indicates to the C program that it should
762 * include <limits.h> to get definition of symbols like WORD_BIT or
763 * LONG_MAX, i.e. machine dependant limitations.
764 */
765/*#define I_LIMITS / **/
766
767/* I_LOCALE:
768 * This symbol, if defined, indicates to the C program that it should
769 * include <locale.h>.
770 */
771/*#define I_LOCALE / **/
772
773/* I_MATH:
774 * This symbol, if defined, indicates to the C program that it should
775 * include <math.h>.
776 */
777/*#define I_MATH / **/
778
779/* I_MEMORY:
780 * This symbol, if defined, indicates to the C program that it should
781 * include <memory.h>.
782 */
783/*#define I_MEMORY / **/
784
785/* I_NDBM:
786 * This symbol, if defined, indicates that <ndbm.h> exists and should
787 * be included.
788 */
789/*#define I_NDBM / **/
790
791/* I_NET_ERRNO:
792 * This symbol, if defined, indicates that <net/errno.h> exists and
793 * should be included.
794 */
795/*#define I_NET_ERRNO / **/
796
797/* I_NETINET_IN:
798 * This symbol, if defined, indicates to the C program that it should
799 * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
800 */
801/*#define I_NETINET_IN / **/
802
803/* I_SFIO:
804 * This symbol, if defined, indicates to the C program that it should
805 * include <sfio.h>.
806 */
807/*#define I_SFIO / **/
808
809/* I_STDDEF:
810 * This symbol, if defined, indicates that <stddef.h> exists and should
811 * be included.
812 */
813/*#define I_STDDEF / **/
814
815/* I_STDLIB:
816 * This symbol, if defined, indicates that <stdlib.h> exists and should
817 * be included.
818 */
819/*#define I_STDLIB / **/
820
821/* I_STRING:
822 * This symbol, if defined, indicates to the C program that it should
823 * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
824 */
825#define I_STRING /**/
826
827/* I_SYS_DIR:
828 * This symbol, if defined, indicates to the C program that it should
829 * include <sys/dir.h>.
830 */
831/*#define I_SYS_DIR / **/
832
833/* I_SYS_FILE:
834 * This symbol, if defined, indicates to the C program that it should
835 * include <sys/file.h> to get definition of R_OK and friends.
836 */
837/*#define I_SYS_FILE / **/
838
839/* I_SYS_IOCTL:
840 * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
841 * be included. Otherwise, include <sgtty.h> or <termio.h>.
842 */
843/*#define I_SYS_IOCTL / **/
844
845/* I_SYS_NDIR:
846 * This symbol, if defined, indicates to the C program that it should
847 * include <sys/ndir.h>.
848 */
849/*#define I_SYS_NDIR / **/
850
851/* I_SYS_PARAM:
852 * This symbol, if defined, indicates to the C program that it should
853 * include <sys/param.h>.
854 */
855/*#define I_SYS_PARAM / **/
856
857/* I_SYS_RESOURCE:
858 * This symbol, if defined, indicates to the C program that it should
859 * include <sys/resource.h>.
860 */
861/*#define I_SYS_RESOURCE / **/
862
863/* I_SYS_SELECT:
864 * This symbol, if defined, indicates to the C program that it should
865 * include <sys/select.h> in order to get definition of struct timeval.
866 */
867/*#define I_SYS_SELECT / **/
868
869/* I_SYS_STAT:
870 * This symbol, if defined, indicates to the C program that it should
871 * include <sys/stat.h>.
872 */
873#define I_SYS_STAT /**/
874
875/* I_SYS_TIMES:
876 * This symbol, if defined, indicates to the C program that it should
877 * include <sys/times.h>.
878 */
879/*#define I_SYS_TIMES / **/
880
881/* I_SYS_TYPES:
882 * This symbol, if defined, indicates to the C program that it should
883 * include <sys/types.h>.
884 */
885/*#define I_SYS_TYPES / **/
886
887/* I_SYS_UN:
888 * This symbol, if defined, indicates to the C program that it should
889 * include <sys/un.h> to get UNIX domain socket definitions.
890 */
891/*#define I_SYS_UN / **/
892
893/* I_SYS_WAIT:
894 * This symbol, if defined, indicates to the C program that it should
895 * include <sys/wait.h>.
896 */
897/*#define I_SYS_WAIT / **/
898
899/* I_TERMIO:
900 * This symbol, if defined, indicates that the program should include
901 * <termio.h> rather than <sgtty.h>. There are also differences in
902 * the ioctl() calls that depend on the value of this symbol.
903 */
904/* I_TERMIOS:
905 * This symbol, if defined, indicates that the program should include
906 * the POSIX termios.h rather than sgtty.h or termio.h.
907 * There are also differences in the ioctl() calls that depend on the
908 * value of this symbol.
909 */
910/* I_SGTTY:
911 * This symbol, if defined, indicates that the program should include
912 * <sgtty.h> rather than <termio.h>. There are also differences in
913 * the ioctl() calls that depend on the value of this symbol.
914 */
915/*#define I_TERMIO / **/
916/*#define I_TERMIOS / **/
917/*#define I_SGTTY / **/
918
919/* I_UNISTD:
920 * This symbol, if defined, indicates to the C program that it should
921 * include <unistd.h>.
922 */
923/*#define I_UNISTD / **/
924
925/* I_UTIME:
926 * This symbol, if defined, indicates to the C program that it should
927 * include <utime.h>.
928 */
929/*#define I_UTIME / **/
930
931/* I_VALUES:
932 * This symbol, if defined, indicates to the C program that it should
933 * include <values.h> to get definition of symbols like MINFLOAT or
934 * MAXLONG, i.e. machine dependant limitations. Probably, you
935 * should use <limits.h> instead, if it is available.
936 */
937/*#define I_VALUES / **/
938
939/* I_STDARG:
940 * This symbol, if defined, indicates that <stdarg.h> exists and should
941 * be included.
942 */
943/* I_VARARGS:
944 * This symbol, if defined, indicates to the C program that it should
945 * include <varargs.h>.
946 */
947#define I_STDARG /**/
948/*#define I_VARARGS / **/
949
950/* I_VFORK:
951 * This symbol, if defined, indicates to the C program that it should
952 * include vfork.h.
953 */
954/*#define I_VFORK / **/
955
956/* CAN_PROTOTYPE:
957 * If defined, this macro indicates that the C compiler can handle
958 * function prototypes.
959 */
960/* _:
961 * This macro is used to declare function parameters for folks who want
962 * to make declarations with prototypes using a different style than
963 * the above macros. Use double parentheses. For example:
964 *
965 * int main _((int argc, char *argv[]));
966 */
967/*#define CAN_PROTOTYPE / **/
968#ifdef CAN_PROTOTYPE
969#define _(args) args
970#else
971#define _(args) ()
972#endif
973
974/* SH_PATH:
975 * This symbol contains the full pathname to the shell used on this
976 * on this system to execute Bourne shell scripts. Usually, this will be
977 * /bin/sh, though it's possible that some systems will have /bin/ksh,
978 * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
979 * D:/bin/sh.exe.
980 */
981#define SH_PATH "" /**/
982
983/* STDCHAR:
984 * This symbol is defined to be the type of char used in stdio.h.
985 * It has the values "unsigned char" or "char".
986 */
987#define STDCHAR char /**/
988
989/* CROSSCOMPILE:
990 * This symbol, if defined, signifies that we our
991 * build process is a cross-compilation.
992 */
993/*#define CROSSCOMPILE / **/
994
995/* INTSIZE:
996 * This symbol contains the value of sizeof(int) so that the C
997 * preprocessor can make decisions based on it.
998 */
999/* LONGSIZE:
1000 * This symbol contains the value of sizeof(long) so that the C
1001 * preprocessor can make decisions based on it.
1002 */
1003/* SHORTSIZE:
1004 * This symbol contains the value of sizeof(short) so that the C
1005 * preprocessor can make decisions based on it.
1006 */
1007#define INTSIZE 1 /**/
1008#define LONGSIZE 1 /**/
1009#define SHORTSIZE 1 /**/
1010
1011/* MULTIARCH:
1012 * This symbol, if defined, signifies that the build
1013 * process will produce some binary files that are going to be
1014 * used in a cross-platform environment. This is the case for
1015 * example with the NeXT "fat" binaries that contain executables
1016 * for several CPUs.
1017 */
1018/*#define MULTIARCH / **/
1019
1020/* HAS_QUAD:
1021 * This symbol, if defined, tells that there's a 64-bit integer type,
1022 * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
1023 * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
1024 */
1025/*#define HAS_QUAD / **/
1026#ifdef HAS_QUAD
1027# define Quad_t int64_t /**/
1028# define Uquad_t uint64_t /**/
1029# define QUADKIND 4 /**/
1030# define QUAD_IS_INT 1
1031# define QUAD_IS_LONG 2
1032# define QUAD_IS_LONG_LONG 3
1033# define QUAD_IS_INT64_T 4
1034#endif
1035
1036/* HAS_ACCESSX:
1037 * This symbol, if defined, indicates that the accessx routine is
1038 * available to do extended access checks.
1039 */
1040/*#define HAS_ACCESSX / **/
1041
1042/* HAS_EACCESS:
1043 * This symbol, if defined, indicates that the eaccess routine is
1044 * available to do extended access checks.
1045 */
1046/*#define HAS_EACCESS / **/
1047
1048/* I_SYS_ACCESS:
1049 * This symbol, if defined, indicates to the C program that it should
1050 * include <sys/access.h>.
1051 */
1052/*#define I_SYS_ACCESS / **/
1053
1054/* I_SYS_SECURITY:
1055 * This symbol, if defined, indicates to the C program that it should
1056 * include <sys/security.h>.
1057 */
1058/*#define I_SYS_SECURITY / **/
1059
1060/* OSNAME:
1061 * This symbol contains the name of the operating system, as determined
1062 * by Configure. You shouldn't rely on it too much; the specific
1063 * feature tests from Configure are generally more reliable.
1064 */
1065#define OSNAME "unknown" /**/
1066
1067/* MEM_ALIGNBYTES:
1068 * This symbol contains the number of bytes required to align a
1069 * double, or a long double when applicable. Usual values are 2,
1070 * 4 and 8. The default is eight, for safety.
1071 */
1072#if defined(CROSSCOMPILE) || defined(MULTIARCH)
1073# define MEM_ALIGNBYTES 8
1074#else
1075#define MEM_ALIGNBYTES 4
1076#endif
1077
1078/* ARCHLIB:
1079 * This variable, if defined, holds the name of the directory in
1080 * which the user wants to put architecture-dependent public
1081 * library files for . It is most often a local directory
1082 * such as /usr/local/lib. Programs using this variable must be
1083 * prepared to deal with filename expansion. If ARCHLIB is the
1084 * same as PRIVLIB, it is not defined, since presumably the
1085 * program already searches PRIVLIB.
1086 */
1087/* ARCHLIB_EXP:
1088 * This symbol contains the ~name expanded version of ARCHLIB, to be used
1089 * in programs that are not prepared to deal with ~ expansion at run-time.
1090 */
1091/*#define ARCHLIB "/usr/local/lib/perl5/5.6/unknown" / **/
1092/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.6/unknown" / **/
1093
1094/* ARCHNAME:
1095 * This symbol holds a string representing the architecture name.
1096 * It may be used to construct an architecture-dependant pathname
1097 * where library files may be held under a private library, for
1098 * instance.
1099 */
1100#define ARCHNAME "unknown" /**/
1101
1102/* HAS_ATOLF:
1103 * This symbol, if defined, indicates that the atolf routine is
1104 * available to convert strings into long doubles.
1105 */
1106/*#define HAS_ATOLF / **/
1107
1108/* HAS_ATOLL:
1109 * This symbol, if defined, indicates that the atoll routine is
1110 * available to convert strings into long longs.
1111 */
1112/*#define HAS_ATOLL / **/
1113
1114/* BIN:
1115 * This symbol holds the path of the bin directory where the package will
1116 * be installed. Program must be prepared to deal with ~name substitution.
1117 */
1118/* BIN_EXP:
1119 * This symbol is the filename expanded version of the BIN symbol, for
1120 * programs that do not want to deal with that at run-time.
1121 */
1122#define BIN "/usr/local/bin" /**/
1123#define BIN_EXP "" /**/
1124
1125/* PERL_BINCOMPAT_5005:
1126 * This symbol, if defined, indicates that this version of Perl should be
1127 * binary-compatible with Perl 5.005. This is impossible for builds
1128 * that use features like threads and multiplicity it is always
1129 * for those versions.
1130 */
1131/*#define PERL_BINCOMPAT_5005 / **/
1132
1133/* BYTEORDER:
1134 * This symbol holds the hexadecimal constant defined in byteorder,
1135 * i.e. 0x1234 or 0x4321, etc...
1136 * If the compiler supports cross-compiling or multiple-architecture
1137 * binaries (eg. on NeXT systems), use compiler-defined macros to
1138 * determine the byte order.
1139 * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
1140 * Binaries (MAB) on either big endian or little endian machines.
1141 * The endian-ness is available at compile-time. This only matters
1142 * for perl, where the config.h can be generated and installed on
1143 * one system, and used by a different architecture to build an
1144 * extension. Older versions of NeXT that might not have
1145 * defined either *_ENDIAN__ were all on Motorola 680x0 series,
1146 * so the default case (for NeXT) is big endian to catch them.
1147 * This might matter for NeXT 3.0.
1148 */
1149#if defined(CROSSCOMPILE) || defined(MULTIARCH)
1150# ifdef __LITTLE_ENDIAN__
1151# if LONGSIZE == 4
1152# define BYTEORDER 0x1234
1153# else
1154# if LONGSIZE == 8
1155# define BYTEORDER 0x12345678
1156# endif
1157# endif
1158# else
1159# ifdef __BIG_ENDIAN__
1160# if LONGSIZE == 4
1161# define BYTEORDER 0x4321
1162# else
1163# if LONGSIZE == 8
1164# define BYTEORDER 0x87654321
1165# endif
1166# endif
1167# endif
1168# endif
1169# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
1170# define BYTEORDER 0x4321
1171# endif
1172#else
1173#define BYTEORDER 0x12 /* large digits for MSB */
1174#endif /* NeXT */
1175
1176/* CAT2:
1177 * This macro catenates 2 tokens together.
1178 */
1179/* STRINGIFY:
1180 * This macro surrounds its token with double quotes.
1181 */
1182#if 42 == 1
1183# define CAT2(a,b) a/**/b
1184# define STRINGIFY(a) "a"
1185 /* If you can get stringification with catify, tell me how! */
1186#endif
1187#if 42 == 42
1188# define PeRl_CaTiFy(a, b) a ## b
1189# define PeRl_StGiFy(a) #a
1190/* the additional level of indirection enables these macros to be
1191 * used as arguments to other macros. See K&R 2nd ed., page 231. */
1192# define CAT2(a,b) PeRl_CaTiFy(a,b)
1193# define StGiFy(a) PeRl_StGiFy(a)
1194# define STRINGIFY(a) PeRl_StGiFy(a)
1195#endif
1196#if 42 != 1 && 42 != 42
1197# include "Bletch: How does this C preprocessor catenate tokens?"
1198#endif
1199
1200/* CPPSTDIN:
1201 * This symbol contains the first part of the string which will invoke
1202 * the C preprocessor on the standard input and produce to standard
1203 * output. Typical value of "cc -E" or "/lib/cpp", but it can also
1204 * call a wrapper. See CPPRUN.
1205 */
1206/* CPPMINUS:
1207 * This symbol contains the second part of the string which will invoke
1208 * the C preprocessor on the standard input and produce to standard
1209 * output. This symbol will have the value "-" if CPPSTDIN needs a minus
1210 * to specify standard input, otherwise the value is "".
1211 */
1212/* CPPRUN:
1213 * This symbol contains the string which will invoke a C preprocessor on
1214 * the standard input and produce to standard output. It needs to end
1215 * with CPPLAST, after all other preprocessor flags have been specified.
1216 * The main difference with CPPSTDIN is that this program will never be a
1217 * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
1218 * available directly to the user. Note that it may well be different from
1219 * the preprocessor used to compile the C program.
1220 */
1221/* CPPLAST:
1222 * This symbol is intended to be used along with CPPRUN in the same manner
1223 * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
1224 */
1225#define CPPSTDIN ""
1226#define CPPMINUS ""
1227#define CPPRUN ""
1228#define CPPLAST ""
1229
1230/* HAS_ACCESS:
1231 * This manifest constant lets the C program know that the access()
1232 * system call is available to check for accessibility using real UID/GID.
1233 * (always present on UNIX.)
1234 */
1235/*#define HAS_ACCESS / **/
1236
1237/* CASTI32:
1238 * This symbol is defined if the C compiler can cast negative
1239 * or large floating point numbers to 32-bit ints.
1240 */
1241/*#define CASTI32 / **/
1242
1243/* CASTNEGFLOAT:
1244 * This symbol is defined if the C compiler can cast negative
1245 * numbers to unsigned longs, ints and shorts.
1246 */
1247/* CASTFLAGS:
1248 * This symbol contains flags that say what difficulties the compiler
1249 * has casting odd floating values to unsigned long:
1250 * 0 = ok
1251 * 1 = couldn't cast < 0
1252 * 2 = couldn't cast >= 0x80000000
1253 * 4 = couldn't cast in argument expression list
1254 */
1255/*#define CASTNEGFLOAT / **/
1256#define CASTFLAGS 0 /**/
1257
1258/* VOID_CLOSEDIR:
1259 * This symbol, if defined, indicates that the closedir() routine
1260 * does not return a value.
1261 */
1262/*#define VOID_CLOSEDIR / **/
1263
1264/* HAS_CSH:
1265 * This symbol, if defined, indicates that the C-shell exists.
1266 */
1267/* CSH:
1268 * This symbol, if defined, contains the full pathname of csh.
1269 */
1270/*#define HAS_CSH / **/
1271#ifdef HAS_CSH
1272#define CSH "" /**/
1273#endif
1274
1275/* DLSYM_NEEDS_UNDERSCORE:
1276 * This symbol, if defined, indicates that we need to prepend an
1277 * underscore to the symbol name before calling dlsym(). This only
1278 * makes sense if you *have* dlsym, which we will presume is the
1279 * case if you're using dl_dlopen.xs.
1280 */
1281/*#define DLSYM_NEEDS_UNDERSCORE / **/
1282
1283/* HAS_DRAND48_PROTO:
1284 * This symbol, if defined, indicates that the system provides
1285 * a prototype for the drand48() function. Otherwise, it is up
1286 * to the program to supply one. A good guess is
1287 * extern double drand48 _((void));
1288 */
1289/*#define HAS_DRAND48_PROTO / **/
1290
1291/* HAS_ENDGRENT:
1292 * This symbol, if defined, indicates that the getgrent routine is
1293 * available for finalizing sequential access of the group database.
1294 */
1295/*#define HAS_ENDGRENT / **/
1296
1297/* HAS_ENDHOSTENT:
1298 * This symbol, if defined, indicates that the endhostent() routine is
1299 * available to close whatever was being used for host queries.
1300 */
1301/*#define HAS_ENDHOSTENT / **/
1302
1303/* HAS_ENDNETENT:
1304 * This symbol, if defined, indicates that the endnetent() routine is
1305 * available to close whatever was being used for network queries.
1306 */
1307/*#define HAS_ENDNETENT / **/
1308
1309/* HAS_ENDPROTOENT:
1310 * This symbol, if defined, indicates that the endprotoent() routine is
1311 * available to close whatever was being used for protocol queries.
1312 */
1313/*#define HAS_ENDPROTOENT / **/
1314
1315/* HAS_ENDPWENT:
1316 * This symbol, if defined, indicates that the getgrent routine is
1317 * available for finalizing sequential access of the passwd database.
1318 */
1319/*#define HAS_ENDPWENT / **/
1320
1321/* HAS_ENDSERVENT:
1322 * This symbol, if defined, indicates that the endservent() routine is
1323 * available to close whatever was being used for service queries.
1324 */
1325/*#define HAS_ENDSERVENT / **/
1326
1327/* HAS_FD_SET:
1328 * This symbol, when defined, indicates presence of the fd_set typedef
1329 * in <sys/types.h>
1330 */
1331/*#define HAS_FD_SET / **/
1332
1333/* FLEXFILENAMES:
1334 * This symbol, if defined, indicates that the system supports filenames
1335 * longer than 14 characters.
1336 */
1337/*#define FLEXFILENAMES / **/
1338
1339/* HAS_FPOS64_T:
1340 * This symbol will be defined if the C compiler supports fpos64_t.
1341 */
1342/*#define HAS_FPOS64_T / **/
1343
1344/* HAS_FREXPL:
1345 * This symbol, if defined, indicates that the frexpl routine is
1346 * available to break a long double floating-point number into
1347 * a normalized fraction and an integral power of 2.
1348 */
1349/*#define HAS_FREXPL / **/
1350
1351/* HAS_STRUCT_FS_DATA:
1352 * This symbol, if defined, indicates that the struct fs_data
1353 * to do statfs() is supported.
1354 */
1355/*#define HAS_STRUCT_FS_DATA / **/
1356
1357/* HAS_FSEEKO:
1358 * This symbol, if defined, indicates that the fseeko routine is
1359 * available to fseek beyond 32 bits (useful for ILP32 hosts).
1360 */
1361/*#define HAS_FSEEKO / **/
1362
1363/* HAS_FSTATFS:
1364 * This symbol, if defined, indicates that the fstatfs routine is
1365 * available to stat filesystems by file descriptors.
1366 */
1367/*#define HAS_FSTATFS / **/
1368
1369/* HAS_FTELLO:
1370 * This symbol, if defined, indicates that the ftello routine is
1371 * available to ftell beyond 32 bits (useful for ILP32 hosts).
1372 */
1373/*#define HAS_FTELLO / **/
1374
1375/* Gconvert:
1376 * This preprocessor macro is defined to convert a floating point
1377 * number to a string without a trailing decimal point. This
1378 * emulates the behavior of sprintf("%g"), but is sometimes much more
1379 * efficient. If gconvert() is not available, but gcvt() drops the
1380 * trailing decimal point, then gcvt() is used. If all else fails,
1381 * a macro using sprintf("%g") is used. Arguments for the Gconvert
1382 * macro are: value, number of digits, whether trailing zeros should
1383 * be retained, and the output buffer.
1384 * Possible values are:
1385 * d_Gconvert='gconvert((x),(n),(t),(b))'
1386 * d_Gconvert='gcvt((x),(n),(b))'
1387 * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
1388 * The last two assume trailing zeros should not be kept.
1389 */
1390#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
1391
1392/* HAS_GETCWD:
1393 * This symbol, if defined, indicates that the getcwd routine is
1394 * available to get the current working directory.
1395 */
1396/*#define HAS_GETCWD / **/
1397
1398/* HAS_GETESPWNAM:
1399 * This symbol, if defined, indicates that the getespwnam system call is
1400 * available to retrieve enchanced (shadow) password entries by name.
1401 */
1402/*#define HAS_GETESPWNAM / **/
1403
1404/* HAS_GETFSSTAT:
1405 * This symbol, if defined, indicates that the getfsstat routine is
1406 * available to stat filesystems in bulk.
1407 */
1408/*#define HAS_GETFSSTAT / **/
1409
1410/* HAS_GETGRENT:
1411 * This symbol, if defined, indicates that the getgrent routine is
1412 * available for sequential access of the group database.
1413 */
1414/*#define HAS_GETGRENT / **/
1415
1416/* HAS_GETHOSTBYADDR:
1417 * This symbol, if defined, indicates that the gethostbyaddr() routine is
1418 * available to look up hosts by their IP addresses.
1419 */
1420/*#define HAS_GETHOSTBYADDR / **/
1421
1422/* HAS_GETHOSTBYNAME:
1423 * This symbol, if defined, indicates that the gethostbyname() routine is
1424 * available to look up host names in some data base or other.
1425 */
1426/*#define HAS_GETHOSTBYNAME / **/
1427
1428/* HAS_GETHOSTENT:
1429 * This symbol, if defined, indicates that the gethostent() routine is
1430 * available to look up host names in some data base or another.
1431 */
1432/*#define HAS_GETHOSTENT / **/
1433
1434/* HAS_GETHOSTNAME:
1435 * This symbol, if defined, indicates that the C program may use the
1436 * gethostname() routine to derive the host name. See also HAS_UNAME
1437 * and PHOSTNAME.
1438 */
1439/* HAS_UNAME:
1440 * This symbol, if defined, indicates that the C program may use the
1441 * uname() routine to derive the host name. See also HAS_GETHOSTNAME
1442 * and PHOSTNAME.
1443 */
1444/* PHOSTNAME:
1445 * This symbol, if defined, indicates the command to feed to the
1446 * popen() routine to derive the host name. See also HAS_GETHOSTNAME
1447 * and HAS_UNAME. Note that the command uses a fully qualified path,
1448 * so that it is safe even if used by a process with super-user
1449 * privileges.
1450 */
1451/* HAS_PHOSTNAME:
1452 * This symbol, if defined, indicates that the C program may use the
1453 * contents of PHOSTNAME as a command to feed to the popen() routine
1454 * to derive the host name.
1455 */
1456/*#define HAS_GETHOSTNAME / **/
1457/*#define HAS_UNAME / **/
1458/*#define HAS_PHOSTNAME / **/
1459#ifdef HAS_PHOSTNAME
1460#define PHOSTNAME "" /* How to get the host name */
1461#endif
1462
1463/* HAS_GETHOST_PROTOS:
1464 * This symbol, if defined, indicates that <netdb.h> includes
1465 * prototypes for gethostent(), gethostbyname(), and
1466 * gethostbyaddr(). Otherwise, it is up to the program to guess
1467 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1468 */
1469/*#define HAS_GETHOST_PROTOS / **/
1470
1471/* HAS_GETMNT:
1472 * This symbol, if defined, indicates that the getmnt routine is
1473 * available to get filesystem mount info by filename.
1474 */
1475/*#define HAS_GETMNT / **/
1476
1477/* HAS_GETMNTENT:
1478 * This symbol, if defined, indicates that the getmntent routine is
1479 * available to iterate through mounted file systems to get their info.
1480 */
1481/*#define HAS_GETMNTENT / **/
1482
1483/* HAS_GETNETBYADDR:
1484 * This symbol, if defined, indicates that the getnetbyaddr() routine is
1485 * available to look up networks by their IP addresses.
1486 */
1487/*#define HAS_GETNETBYADDR / **/
1488
1489/* HAS_GETNETBYNAME:
1490 * This symbol, if defined, indicates that the getnetbyname() routine is
1491 * available to look up networks by their names.
1492 */
1493/*#define HAS_GETNETBYNAME / **/
1494
1495/* HAS_GETNETENT:
1496 * This symbol, if defined, indicates that the getnetent() routine is
1497 * available to look up network names in some data base or another.
1498 */
1499/*#define HAS_GETNETENT / **/
1500
1501/* HAS_GETNET_PROTOS:
1502 * This symbol, if defined, indicates that <netdb.h> includes
1503 * prototypes for getnetent(), getnetbyname(), and
1504 * getnetbyaddr(). Otherwise, it is up to the program to guess
1505 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1506 */
1507/*#define HAS_GETNET_PROTOS / **/
1508
1509/* HAS_GETPROTOENT:
1510 * This symbol, if defined, indicates that the getprotoent() routine is
1511 * available to look up protocols in some data base or another.
1512 */
1513/*#define HAS_GETPROTOENT / **/
1514
1515/* HAS_GETPROTOBYNAME:
1516 * This symbol, if defined, indicates that the getprotobyname()
1517 * routine is available to look up protocols by their name.
1518 */
1519/* HAS_GETPROTOBYNUMBER:
1520 * This symbol, if defined, indicates that the getprotobynumber()
1521 * routine is available to look up protocols by their number.
1522 */
1523/*#define HAS_GETPROTOBYNAME / **/
1524/*#define HAS_GETPROTOBYNUMBER / **/
1525
1526/* HAS_GETPROTO_PROTOS:
1527 * This symbol, if defined, indicates that <netdb.h> includes
1528 * prototypes for getprotoent(), getprotobyname(), and
1529 * getprotobyaddr(). Otherwise, it is up to the program to guess
1530 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1531 */
1532/*#define HAS_GETPROTO_PROTOS / **/
1533
1534/* HAS_GETPRPWNAM:
1535 * This symbol, if defined, indicates that the getprpwnam system call is
1536 * available to retrieve protected (shadow) password entries by name.
1537 */
1538/*#define HAS_GETPRPWNAM / **/
1539
1540/* HAS_GETPWENT:
1541 * This symbol, if defined, indicates that the getpwent routine is
1542 * available for sequential access of the passwd database.
1543 * If this is not available, the older getpw() function may be available.
1544 */
1545/*#define HAS_GETPWENT / **/
1546
1547/* HAS_GETSERVENT:
1548 * This symbol, if defined, indicates that the getservent() routine is
1549 * available to look up network services in some data base or another.
1550 */
1551/*#define HAS_GETSERVENT / **/
1552
1553/* HAS_GETSERV_PROTOS:
1554 * This symbol, if defined, indicates that <netdb.h> includes
1555 * prototypes for getservent(), getservbyname(), and
1556 * getservbyaddr(). Otherwise, it is up to the program to guess
1557 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1558 */
1559/*#define HAS_GETSERV_PROTOS / **/
1560
1561/* HAS_GETSPNAM:
1562 * This symbol, if defined, indicates that the getspnam system call is
1563 * available to retrieve SysV shadow password entries by name.
1564 */
1565/*#define HAS_GETSPNAM / **/
1566
1567/* HAS_GETSERVBYNAME:
1568 * This symbol, if defined, indicates that the getservbyname()
1569 * routine is available to look up services by their name.
1570 */
1571/* HAS_GETSERVBYPORT:
1572 * This symbol, if defined, indicates that the getservbyport()
1573 * routine is available to look up services by their port.
1574 */
1575/*#define HAS_GETSERVBYNAME / **/
1576/*#define HAS_GETSERVBYPORT / **/
1577
1578/* HAS_GNULIBC:
1579 * This symbol, if defined, indicates to the C program that
1580 * the GNU C library is being used.
1581 */
1582/*#define HAS_GNULIBC / **/
1583#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
1584# define _GNU_SOURCE
1585#endif
1586/* HAS_HASMNTOPT:
1587 * This symbol, if defined, indicates that the hasmntopt routine is
1588 * available to query the mount options of file systems.
1589 */
1590/*#define HAS_HASMNTOPT / **/
1591
1592/* HAS_HTONL:
1593 * This symbol, if defined, indicates that the htonl() routine (and
1594 * friends htons() ntohl() ntohs()) are available to do network
1595 * order byte swapping.
1596 */
1597/* HAS_HTONS:
1598 * This symbol, if defined, indicates that the htons() routine (and
1599 * friends htonl() ntohl() ntohs()) are available to do network
1600 * order byte swapping.
1601 */
1602/* HAS_NTOHL:
1603 * This symbol, if defined, indicates that the ntohl() routine (and
1604 * friends htonl() htons() ntohs()) are available to do network
1605 * order byte swapping.
1606 */
1607/* HAS_NTOHS:
1608 * This symbol, if defined, indicates that the ntohs() routine (and
1609 * friends htonl() htons() ntohl()) are available to do network
1610 * order byte swapping.
1611 */
1612/*#define HAS_HTONL / **/
1613/*#define HAS_HTONS / **/
1614/*#define HAS_NTOHL / **/
1615/*#define HAS_NTOHS / **/
1616
1617/* HAS_ICONV:
1618 * This symbol, if defined, indicates that the iconv routine is
1619 * available to do character set conversions.
1620 */
1621/*#define HAS_ICONV / **/
1622
1623/* HAS_INT64_T:
1624 * This symbol will defined if the C compiler supports int64_t.
1625 * Usually the <inttypes.h> needs to be included, but sometimes
1626 * <sys/types.h> is enough.
1627 */
1628/*#define HAS_INT64_T / **/
1629
1630/* HAS_ISASCII:
1631 * This manifest constant lets the C program know that isascii
1632 * is available.
1633 */
1634/*#define HAS_ISASCII / **/
1635
1636/* HAS_ISNAN:
1637 * This symbol, if defined, indicates that the isnan routine is
1638 * available to check whether a double is a NaN.
1639 */
1640/*#define HAS_ISNAN / **/
1641
1642/* HAS_ISNANL:
1643 * This symbol, if defined, indicates that the isnanl routine is
1644 * available to check whether a long double is a NaN.
1645 */
1646/*#define HAS_ISNANL / **/
1647
1648/* HAS_LCHOWN:
1649 * This symbol, if defined, indicates that the lchown routine is
1650 * available to operate on a symbolic link (instead of following the
1651 * link).
1652 */
1653/*#define HAS_LCHOWN / **/
1654
1655/* HAS_LDBL_DIG:
1656 * This symbol, if defined, indicates that this system's <float.h>
1657 * or <limits.h> defines the symbol LDBL_DIG, which is the number
1658 * of significant digits in a long double precision number. Unlike
1659 * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
1660 */
1661/*#define HAS_LDBL_DIG / * */
1662
1663/* HAS_LONG_DOUBLE:
1664 * This symbol will be defined if the C compiler supports long
1665 * doubles.
1666 */
1667/* LONG_DOUBLESIZE:
1668 * This symbol contains the size of a long double, so that the
1669 * C preprocessor can make decisions based on it. It is only
1670 * defined if the system supports long doubles.
1671 */
1672/*#define HAS_LONG_DOUBLE / **/
1673#ifdef HAS_LONG_DOUBLE
1674#define LONG_DOUBLESIZE 1 /**/
1675#endif
1676
1677/* HAS_LONG_LONG:
1678 * This symbol will be defined if the C compiler supports long long.
1679 */
1680/* LONGLONGSIZE:
1681 * This symbol contains the size of a long long, so that the
1682 * C preprocessor can make decisions based on it. It is only
1683 * defined if the system supports long long.
1684 */
1685/*#define HAS_LONG_LONG / **/
1686#ifdef HAS_LONG_LONG
1687#define LONGLONGSIZE 1 /**/
1688#endif
1689
1690/* HAS_LSEEK_PROTO:
1691 * This symbol, if defined, indicates that the system provides
1692 * a prototype for the lseek() function. Otherwise, it is up
1693 * to the program to supply one. A good guess is
1694 * extern off_t lseek(int, off_t, int);
1695 */
1696/*#define HAS_LSEEK_PROTO / **/
1697
1698/* HAS_MADVISE:
1699 * This symbol, if defined, indicates that the madvise system call is
1700 * available to map a file into memory.
1701 */
1702/*#define HAS_MADVISE / **/
1703
1704/* HAS_MEMCHR:
1705 * This symbol, if defined, indicates that the memchr routine is available
1706 * to locate characters within a C string.
1707 */
1708/*#define HAS_MEMCHR / **/
1709
1710/* HAS_MKDTEMP:
1711 * This symbol, if defined, indicates that the mkdtemp routine is
1712 * available to exclusively create a uniquely named temporary directory.
1713 */
1714/*#define HAS_MKDTEMP / **/
1715
1716/* HAS_MKSTEMP:
1717 * This symbol, if defined, indicates that the mkstemp routine is
1718 * available to exclusively create and open a uniquely named
1719 * temporary file.
1720 */
1721/*#define HAS_MKSTEMP / **/
1722
1723/* HAS_MKSTEMPS:
1724 * This symbol, if defined, indicates that the mkstemps routine is
1725 * available to excluslvely create and open a uniquely named
1726 * (with a suffix) temporary file.
1727 */
1728/*#define HAS_MKSTEMPS / **/
1729
1730/* HAS_MMAP:
1731 * This symbol, if defined, indicates that the mmap system call is
1732 * available to map a file into memory.
1733 */
1734/* Mmap_t:
1735 * This symbol holds the return type of the mmap() system call
1736 * (and simultaneously the type of the first argument).
1737 * Usually set to 'void *' or 'cadd_t'.
1738 */
1739/*#define HAS_MMAP / **/
1740#define Mmap_t /**/
1741
1742/* HAS_MODFL:
1743 * This symbol, if defined, indicates that the modfl routine is
1744 * available to split a long double x into a fractional part f and
1745 * an integer part i such that |f| < 1.0 and (f + i) = x.
1746 */
1747/*#define HAS_MODFL / **/
1748
1749/* HAS_MPROTECT:
1750 * This symbol, if defined, indicates that the mprotect system call is
1751 * available to modify the access protection of a memory mapped file.
1752 */
1753/*#define HAS_MPROTECT / **/
1754
1755/* HAS_MSG:
1756 * This symbol, if defined, indicates that the entire msg*(2) library is
1757 * supported (IPC mechanism based on message queues).
1758 */
1759/*#define HAS_MSG / **/
1760
1761/* HAS_OFF64_T:
1762 * This symbol will be defined if the C compiler supports off64_t.
1763 */
1764/*#define HAS_OFF64_T / **/
1765
1766/* HAS_OPEN3:
1767 * This manifest constant lets the C program know that the three
1768 * argument form of open(2) is available.
1769 */
1770/*#define HAS_OPEN3 / **/
1771
1772/* OLD_PTHREAD_CREATE_JOINABLE:
1773 * This symbol, if defined, indicates how to create pthread
1774 * in joinable (aka undetached) state. NOTE: not defined
1775 * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
1776 * (the new version of the constant).
1777 * If defined, known values are PTHREAD_CREATE_UNDETACHED
1778 * and __UNDETACHED.
1779 */
1780/*#define OLD_PTHREAD_CREATE_JOINABLE / **/
1781
1782/* HAS_PTHREAD_YIELD:
1783 * This symbol, if defined, indicates that the pthread_yield
1784 * routine is available to yield the execution of the current
1785 * thread. sched_yield is preferable to pthread_yield.
1786 */
1787/* SCHED_YIELD:
1788 * This symbol defines the way to yield the execution of
1789 * the current thread. Known ways are sched_yield,
1790 * pthread_yield, and pthread_yield with NULL.
1791 */
1792/* HAS_SCHED_YIELD:
1793 * This symbol, if defined, indicates that the sched_yield
1794 * routine is available to yield the execution of the current
1795 * thread. sched_yield is preferable to pthread_yield.
1796 */
1797/*#define HAS_PTHREAD_YIELD / **/
1798#define SCHED_YIELD sched_yield() /**/
1799/*#define HAS_SCHED_YIELD / **/
1800
1801/* HAS_SAFE_BCOPY:
1802 * This symbol, if defined, indicates that the bcopy routine is available
1803 * to copy potentially overlapping memory blocks. Otherwise you should
1804 * probably use memmove() or memcpy(). If neither is defined, roll your
1805 * own version.
1806 */
1807/*#define HAS_SAFE_BCOPY / **/
1808
1809/* HAS_SAFE_MEMCPY:
1810 * This symbol, if defined, indicates that the memcpy routine is available
1811 * to copy potentially overlapping memory blocks. Otherwise you should
1812 * probably use memmove() or memcpy(). If neither is defined, roll your
1813 * own version.
1814 */
1815/*#define HAS_SAFE_MEMCPY / **/
1816
1817/* HAS_SANE_MEMCMP:
1818 * This symbol, if defined, indicates that the memcmp routine is available
1819 * and can be used to compare relative magnitudes of chars with their high
1820 * bits set. If it is not defined, roll your own version.
1821 */
1822/*#define HAS_SANE_MEMCMP / **/
1823
1824/* HAS_SEM:
1825 * This symbol, if defined, indicates that the entire sem*(2) library is
1826 * supported.
1827 */
1828/*#define HAS_SEM / **/
1829
1830/* HAS_SETGRENT:
1831 * This symbol, if defined, indicates that the setgrent routine is
1832 * available for initializing sequential access of the group database.
1833 */
1834/*#define HAS_SETGRENT / **/
1835
1836/* HAS_SETGROUPS:
1837 * This symbol, if defined, indicates that the setgroups() routine is
1838 * available to set the list of process groups. If unavailable, multiple
1839 * groups are probably not supported.
1840 */
1841/*#define HAS_SETGROUPS / **/
1842
1843/* HAS_SETHOSTENT:
1844 * This symbol, if defined, indicates that the sethostent() routine is
1845 * available.
1846 */
1847/*#define HAS_SETHOSTENT / **/
1848
1849/* HAS_SETNETENT:
1850 * This symbol, if defined, indicates that the setnetent() routine is
1851 * available.
1852 */
1853/*#define HAS_SETNETENT / **/
1854
1855/* HAS_SETPROTOENT:
1856 * This symbol, if defined, indicates that the setprotoent() routine is
1857 * available.
1858 */
1859/*#define HAS_SETPROTOENT / **/
1860
1861/* HAS_SETPWENT:
1862 * This symbol, if defined, indicates that the setpwent routine is
1863 * available for initializing sequential access of the passwd database.
1864 */
1865/*#define HAS_SETPWENT / **/
1866
1867/* HAS_SETSERVENT:
1868 * This symbol, if defined, indicates that the setservent() routine is
1869 * available.
1870 */
1871/*#define HAS_SETSERVENT / **/
1872
1873/* HAS_SETVBUF:
1874 * This symbol, if defined, indicates that the setvbuf routine is
1875 * available to change buffering on an open stdio stream.
1876 * to a line-buffered mode.
1877 */
1878/*#define HAS_SETVBUF / **/
1879
1880/* USE_SFIO:
1881 * This symbol, if defined, indicates that sfio should
1882 * be used.
1883 */
1884/*#define USE_SFIO / **/
1885
1886/* HAS_SHM:
1887 * This symbol, if defined, indicates that the entire shm*(2) library is
1888 * supported.
1889 */
1890/*#define HAS_SHM / **/
1891
1892/* HAS_SIGACTION:
1893 * This symbol, if defined, indicates that Vr4's sigaction() routine
1894 * is available.
1895 */
1896/*#define HAS_SIGACTION / **/
1897
1898/* HAS_SIGSETJMP:
1899 * This variable indicates to the C program that the sigsetjmp()
1900 * routine is available to save the calling process's registers
1901 * and stack environment for later use by siglongjmp(), and
1902 * to optionally save the process's signal mask. See
1903 * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
1904 */
1905/* Sigjmp_buf:
1906 * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
1907 */
1908/* Sigsetjmp:
1909 * This macro is used in the same way as sigsetjmp(), but will invoke
1910 * traditional setjmp() if sigsetjmp isn't available.
1911 * See HAS_SIGSETJMP.
1912 */
1913/* Siglongjmp:
1914 * This macro is used in the same way as siglongjmp(), but will invoke
1915 * traditional longjmp() if siglongjmp isn't available.
1916 * See HAS_SIGSETJMP.
1917 */
1918/*#define HAS_SIGSETJMP / **/
1919#ifdef HAS_SIGSETJMP
1920#define Sigjmp_buf sigjmp_buf
1921#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
1922#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
1923#else
1924#define Sigjmp_buf jmp_buf
1925#define Sigsetjmp(buf,save_mask) setjmp((buf))
1926#define Siglongjmp(buf,retval) longjmp((buf),(retval))
1927#endif
1928
1929/* HAS_SOCKET:
1930 * This symbol, if defined, indicates that the BSD socket interface is
1931 * supported.
1932 */
1933/* HAS_SOCKETPAIR:
1934 * This symbol, if defined, indicates that the BSD socketpair() call is
1935 * supported.
1936 */
1937/* HAS_MSG_CTRUNC:
1938 * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
1939 * Checking just with #ifdef might not be enough because this symbol
1940 * has been known to be an enum.
1941 */
1942/* HAS_MSG_DONTROUTE:
1943 * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
1944 * Checking just with #ifdef might not be enough because this symbol
1945 * has been known to be an enum.
1946 */
1947/* HAS_MSG_OOB:
1948 * This symbol, if defined, indicates that the MSG_OOB is supported.
1949 * Checking just with #ifdef might not be enough because this symbol
1950 * has been known to be an enum.
1951 */
1952/* HAS_MSG_PEEK:
1953 * This symbol, if defined, indicates that the MSG_PEEK is supported.
1954 * Checking just with #ifdef might not be enough because this symbol
1955 * has been known to be an enum.
1956 */
1957/* HAS_MSG_PROXY:
1958 * This symbol, if defined, indicates that the MSG_PROXY is supported.
1959 * Checking just with #ifdef might not be enough because this symbol
1960 * has been known to be an enum.
1961 */
1962/* HAS_SCM_RIGHTS:
1963 * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
1964 * Checking just with #ifdef might not be enough because this symbol
1965 * has been known to be an enum.
1966 */
1967/*#define HAS_SOCKET / **/
1968/*#define HAS_SOCKETPAIR / **/
1969/*#define HAS_MSG_CTRUNC / **/
1970/*#define HAS_MSG_DONTROUTE / **/
1971/*#define HAS_MSG_OOB / **/
1972/*#define HAS_MSG_PEEK / **/
1973/*#define HAS_MSG_PROXY / **/
1974/*#define HAS_SCM_RIGHTS / **/
1975
1976/* HAS_SQRTL:
1977 * This symbol, if defined, indicates that the sqrtl routine is
1978 * available to do long double square roots.
1979 */
1980/*#define HAS_SQRTL / **/
1981
1982/* USE_STAT_BLOCKS:
1983 * This symbol is defined if this system has a stat structure declaring
1984 * st_blksize and st_blocks.
1985 */
1986#ifndef USE_STAT_BLOCKS
1987/*#define USE_STAT_BLOCKS / **/
1988#endif
1989
1990/* HAS_STRUCT_STATFS_F_FLAGS:
1991 * This symbol, if defined, indicates that the struct statfs
1992 * does have the f_flags member containing the mount flags of
1993 * the filesystem containing the file.
1994 * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
1995 * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
1996 * have statfs() and struct statfs, they have ustat() and getmnt()
1997 * with struct ustat and struct fs_data.
1998 */
1999/*#define HAS_STRUCT_STATFS_F_FLAGS / **/
2000
2001/* HAS_STRUCT_STATFS:
2002 * This symbol, if defined, indicates that the struct statfs
2003 * to do statfs() is supported.
2004 */
2005/*#define HAS_STRUCT_STATFS / **/
2006
2007/* HAS_FSTATVFS:
2008 * This symbol, if defined, indicates that the fstatvfs routine is
2009 * available to stat filesystems by file descriptors.
2010 */
2011/*#define HAS_FSTATVFS / **/
2012
2013/* USE_STDIO_PTR:
2014 * This symbol is defined if the _ptr and _cnt fields (or similar)
2015 * of the stdio FILE structure can be used to access the stdio buffer
2016 * for a file handle. If this is defined, then the FILE_ptr(fp)
2017 * and FILE_cnt(fp) macros will also be defined and should be used
2018 * to access these fields.
2019 */
2020/* FILE_ptr:
2021 * This macro is used to access the _ptr field (or equivalent) of the
2022 * FILE structure pointed to by its argument. This macro will always be
2023 * defined if USE_STDIO_PTR is defined.
2024 */
2025/* STDIO_PTR_LVALUE:
2026 * This symbol is defined if the FILE_ptr macro can be used as an
2027 * lvalue.
2028 */
2029/* FILE_cnt:
2030 * This macro is used to access the _cnt field (or equivalent) of the
2031 * FILE structure pointed to by its argument. This macro will always be
2032 * defined if USE_STDIO_PTR is defined.
2033 */
2034/* STDIO_CNT_LVALUE:
2035 * This symbol is defined if the FILE_cnt macro can be used as an
2036 * lvalue.
2037 */
2038/*#define USE_STDIO_PTR / **/
2039#ifdef USE_STDIO_PTR
2040#define FILE_ptr(fp) ((fp)->_IO_read_ptr)
2041/*#define STDIO_PTR_LVALUE / **/
2042#define FILE_cnt(fp) ((fp)->_IO_read_end - (fp)->_IO_read_ptr)
2043/*#define STDIO_CNT_LVALUE / **/
2044#endif
2045
2046/* USE_STDIO_BASE:
2047 * This symbol is defined if the _base field (or similar) of the
2048 * stdio FILE structure can be used to access the stdio buffer for
2049 * a file handle. If this is defined, then the FILE_base(fp) macro
2050 * will also be defined and should be used to access this field.
2051 * Also, the FILE_bufsiz(fp) macro will be defined and should be used
2052 * to determine the number of bytes in the buffer. USE_STDIO_BASE
2053 * will never be defined unless USE_STDIO_PTR is.
2054 */
2055/* FILE_base:
2056 * This macro is used to access the _base field (or equivalent) of the
2057 * FILE structure pointed to by its argument. This macro will always be
2058 * defined if USE_STDIO_BASE is defined.
2059 */
2060/* FILE_bufsiz:
2061 * This macro is used to determine the number of bytes in the I/O
2062 * buffer pointed to by _base field (or equivalent) of the FILE
2063 * structure pointed to its argument. This macro will always be defined
2064 * if USE_STDIO_BASE is defined.
2065 */
2066/*#define USE_STDIO_BASE / **/
2067#ifdef USE_STDIO_BASE
2068#define FILE_base(fp) ((fp)->_IO_read_base)
2069#define FILE_bufsiz(fp) ((fp)->_IO_read_end - (fp)->_IO_read_base)
2070#endif
2071
2072/* HAS_STRERROR:
2073 * This symbol, if defined, indicates that the strerror routine is
2074 * available to translate error numbers to strings. See the writeup
2075 * of Strerror() in this file before you try to define your own.
2076 */
2077/* HAS_SYS_ERRLIST:
2078 * This symbol, if defined, indicates that the sys_errlist array is
2079 * available to translate error numbers to strings. The extern int
2080 * sys_nerr gives the size of that table.
2081 */
2082/* Strerror:
2083 * This preprocessor symbol is defined as a macro if strerror() is
2084 * not available to translate error numbers to strings but sys_errlist[]
2085 * array is there.
2086 */
2087/*#define HAS_STRERROR / **/
2088/*#define HAS_SYS_ERRLIST / **/
2089#define Strerror(e) strerror(e)
2090
2091/* HAS_STRTOLD:
2092 * This symbol, if defined, indicates that the strtold routine is
2093 * available to convert strings to long doubles.
2094 */
2095/*#define HAS_STRTOLD / **/
2096
2097/* HAS_STRTOLL:
2098 * This symbol, if defined, indicates that the strtoll routine is
2099 * available to convert strings to long longs.
2100 */
2101/*#define HAS_STRTOLL / **/
2102
2103/* HAS_STRTOULL:
2104 * This symbol, if defined, indicates that the strtoull routine is
2105 * available to convert strings to unsigned long longs.
2106 */
2107/*#define HAS_STRTOULL / **/
2108
2109/* HAS_STRTOUQ:
2110 * This symbol, if defined, indicates that the strtouq routine is
2111 * available to convert strings to unsigned long longs (quads).
2112 */
2113/*#define HAS_STRTOUQ / **/
2114
2115/* HAS_TELLDIR_PROTO:
2116 * This symbol, if defined, indicates that the system provides
2117 * a prototype for the telldir() function. Otherwise, it is up
2118 * to the program to supply one. A good guess is
2119 * extern long telldir _((DIR*));
2120 */
2121/*#define HAS_TELLDIR_PROTO / **/
2122
2123/* Time_t:
2124 * This symbol holds the type returned by time(). It can be long,
2125 * or time_t on BSD sites (in which case <sys/types.h> should be
2126 * included).
2127 */
2128#define Time_t int /* Time type */
2129
2130/* HAS_TIMES:
2131 * This symbol, if defined, indicates that the times() routine exists.
2132 * Note that this became obsolete on some systems (SUNOS), which now
2133 * use getrusage(). It may be necessary to include <sys/times.h>.
2134 */
2135/*#define HAS_TIMES / **/
2136
2137/* HAS_UNION_SEMUN:
2138 * This symbol, if defined, indicates that the union semun is
2139 * defined by including <sys/sem.h>. If not, the user code
2140 * probably needs to define it as:
2141 * union semun {
2142 * int val;
2143 * struct semid_ds *buf;
2144 * unsigned short *array;
2145 * }
2146 */
2147/* USE_SEMCTL_SEMUN:
2148 * This symbol, if defined, indicates that union semun is
2149 * used for semctl IPC_STAT.
2150 */
2151/* USE_SEMCTL_SEMID_DS:
2152 * This symbol, if defined, indicates that struct semid_ds * is
2153 * used for semctl IPC_STAT.
2154 */
2155/*#define HAS_UNION_SEMUN / **/
2156/*#define USE_SEMCTL_SEMUN / **/
2157/*#define USE_SEMCTL_SEMID_DS / **/
2158
2159/* HAS_USTAT:
2160 * This symbol, if defined, indicates that the ustat system call is
2161 * available to query file system statistics by dev_t.
2162 */
2163/*#define HAS_USTAT / **/
2164
2165/* HAS_VFORK:
2166 * This symbol, if defined, indicates that vfork() exists.
2167 */
2168/*#define HAS_VFORK / **/
2169
2170/* Signal_t:
2171 * This symbol's value is either "void" or "int", corresponding to the
2172 * appropriate return type of a signal handler. Thus, you can declare
2173 * a signal handler using "Signal_t (*handler)()", and define the
2174 * handler using "Signal_t handler(sig)".
2175 */
2176#define Signal_t int /* Signal handler's return type */
2177
2178/* HAS_VPRINTF:
2179 * This symbol, if defined, indicates that the vprintf routine is available
2180 * to printf with a pointer to an argument list. If unavailable, you
2181 * may need to write your own, probably in terms of _doprnt().
2182 */
2183/* USE_CHAR_VSPRINTF:
2184 * This symbol is defined if this system has vsprintf() returning type
2185 * (char*). The trend seems to be to declare it as "int vsprintf()". It
2186 * is up to the package author to declare vsprintf correctly based on the
2187 * symbol.
2188 */
2189#define HAS_VPRINTF /**/
2190/*#define USE_CHAR_VSPRINTF / **/
2191
2192/* USE_DYNAMIC_LOADING:
2193 * This symbol, if defined, indicates that dynamic loading of
2194 * some sort is available.
2195 */
2196/*#define USE_DYNAMIC_LOADING / **/
2197
2198/* DOUBLESIZE:
2199 * This symbol contains the size of a double, so that the C preprocessor
2200 * can make decisions based on it.
2201 */
2202#define DOUBLESIZE 1 /**/
2203
2204/* EBCDIC:
2205 * This symbol, if defined, indicates that this system uses
2206 * EBCDIC encoding.
2207 */
2208/*#define EBCDIC / **/
2209
2210/* FFLUSH_NULL:
2211 * This symbol, if defined, tells that fflush(NULL) does flush
2212 * all pending stdio output.
2213 */
2214/* FFLUSH_ALL:
2215 * This symbol, if defined, tells that to flush
2216 * all pending stdio output one must loop through all
2217 * the stdio file handles stored in an array and fflush them.
2218 * Note that if fflushNULL is defined, fflushall will not
2219 * even be probed for and will be left undefined.
2220 */
2221/*#define FFLUSH_NULL / **/
2222/*#define FFLUSH_ALL / **/
2223
2224/* Fpos_t:
2225 * This symbol holds the type used to declare file positions in libc.
2226 * It can be fpos_t, long, uint, etc... It may be necessary to include
2227 * <sys/types.h> to get any typedef'ed information.
2228 */
2229#define Fpos_t int /* File position type */
2230
2231/* Gid_t_f:
2232 * This symbol defines the format string used for printing a Gid_t.
2233 */
2234#define Gid_t_f "lu" /**/
2235
2236/* Gid_t_sign:
2237 * This symbol holds the signedess of a Gid_t.
2238 * 1 for unsigned, -1 for signed.
2239 */
2240#define Gid_t_sign 1 /* GID sign */
2241
2242/* Gid_t_size:
2243 * This symbol holds the size of a Gid_t in bytes.
2244 */
2245#define Gid_t_size 4 /* GID size */
2246
2247/* Gid_t:
2248 * This symbol holds the return type of getgid() and the type of
2249 * argument to setrgid() and related functions. Typically,
2250 * it is the type of group ids in the kernel. It can be int, ushort,
2251 * gid_t, etc... It may be necessary to include <sys/types.h> to get
2252 * any typedef'ed information.
2253 */
2254#define Gid_t int /* Type for getgid(), etc... */
2255
2256/* Groups_t:
2257 * This symbol holds the type used for the second argument to
2258 * getgroups() and setgroups(). Usually, this is the same as
2259 * gidtype (gid_t) , but sometimes it isn't.
2260 * It can be int, ushort, gid_t, etc...
2261 * It may be necessary to include <sys/types.h> to get any
2262 * typedef'ed information. This is only required if you have
2263 * getgroups() or setgroups()..
2264 */
2265#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
2266#define Groups_t int /* Type for 2nd arg to [sg]etgroups() */
2267#endif
2268
2269/* DB_Prefix_t:
2270 * This symbol contains the type of the prefix structure element
2271 * in the <db.h> header file. In older versions of DB, it was
2272 * int, while in newer ones it is u_int32_t.
2273 */
2274/* DB_Hash_t:
2275 * This symbol contains the type of the prefix structure element
2276 * in the <db.h> header file. In older versions of DB, it was
2277 * int, while in newer ones it is size_t.
2278 */
2279#define DB_Hash_t u_int32_t /**/
2280#define DB_Prefix_t size_t /**/
2281
2282/* I_GRP:
2283 * This symbol, if defined, indicates to the C program that it should
2284 * include <grp.h>.
2285 */
2286/* GRPASSWD:
2287 * This symbol, if defined, indicates to the C program that struct group
2288 * in <grp.h> contains gr_passwd.
2289 */
2290/*#define I_GRP / **/
2291/*#define GRPASSWD / **/
2292
2293/* I_ICONV:
2294 * This symbol, if defined, indicates that <iconv.h> exists and
2295 * should be included.
2296 */
2297/*#define I_ICONV / **/
2298
2299/* I_IEEEFP:
2300 * This symbol, if defined, indicates that <ieeefp.h> exists and
2301 * should be included.
2302 */
2303/*#define I_IEEEFP / **/
2304
2305/* I_INTTYPES:
2306 * This symbol, if defined, indicates to the C program that it should
2307 * include <inttypes.h>.
2308 */
2309/*#define I_INTTYPES / **/
2310
2311/* I_MACH_CTHREADS:
2312 * This symbol, if defined, indicates to the C program that it should
2313 * include <mach/cthreads.h>.
2314 */
2315/*#define I_MACH_CTHREADS / **/
2316
2317/* I_MNTENT:
2318 * This symbol, if defined, indicates that <mntent.h> exists and
2319 * should be included.
2320 */
2321/*#define I_MNTENT / **/
2322
2323/* I_NETDB:
2324 * This symbol, if defined, indicates that <netdb.h> exists and
2325 * should be included.
2326 */
2327/*#define I_NETDB / **/
2328
2329/* I_NETINET_TCP:
2330 * This symbol, if defined, indicates to the C program that it should
2331 * include <netinet/tcp.h>.
2332 */
2333/*#define I_NETINET_TCP / **/
2334
2335/* I_POLL:
2336 * This symbol, if defined, indicates that <poll.h> exists and
2337 * should be included.
2338 */
2339/*#define I_POLL / **/
2340
2341/* I_PROT:
2342 * This symbol, if defined, indicates that <prot.h> exists and
2343 * should be included.
2344 */
2345/*#define I_PROT / **/
2346
2347/* I_PTHREAD:
2348 * This symbol, if defined, indicates to the C program that it should
2349 * include <pthread.h>.
2350 */
2351/*#define I_PTHREAD / **/
2352
2353/* I_PWD:
2354 * This symbol, if defined, indicates to the C program that it should
2355 * include <pwd.h>.
2356 */
2357/* PWQUOTA:
2358 * This symbol, if defined, indicates to the C program that struct passwd
2359 * contains pw_quota.
2360 */
2361/* PWAGE:
2362 * This symbol, if defined, indicates to the C program that struct passwd
2363 * contains pw_age.
2364 */
2365/* PWCHANGE:
2366 * This symbol, if defined, indicates to the C program that struct passwd
2367 * contains pw_change.
2368 */
2369/* PWCLASS:
2370 * This symbol, if defined, indicates to the C program that struct passwd
2371 * contains pw_class.
2372 */
2373/* PWEXPIRE:
2374 * This symbol, if defined, indicates to the C program that struct passwd
2375 * contains pw_expire.
2376 */
2377/* PWCOMMENT:
2378 * This symbol, if defined, indicates to the C program that struct passwd
2379 * contains pw_comment.
2380 */
2381/* PWGECOS:
2382 * This symbol, if defined, indicates to the C program that struct passwd
2383 * contains pw_gecos.
2384 */
2385/* PWPASSWD:
2386 * This symbol, if defined, indicates to the C program that struct passwd
2387 * contains pw_passwd.
2388 */
2389/*#define I_PWD / **/
2390/*#define PWQUOTA / **/
2391/*#define PWAGE / **/
2392/*#define PWCHANGE / **/
2393/*#define PWCLASS / **/
2394/*#define PWEXPIRE / **/
2395/*#define PWCOMMENT / **/
2396/*#define PWGECOS / **/
2397/*#define PWPASSWD / **/
2398
2399/* I_SHADOW:
2400 * This symbol, if defined, indicates that <shadow.h> exists and
2401 * should be included.
2402 */
2403/*#define I_SHADOW / **/
2404
2405/* I_SOCKS:
2406 * This symbol, if defined, indicates that <socks.h> exists and
2407 * should be included.
2408 */
2409/*#define I_SOCKS / **/
2410
2411/* I_SUNMATH:
2412 * This symbol, if defined, indicates that <sunmath.h> exists and
2413 * should be included.
2414 */
2415/*#define I_SUNMATH / **/
2416
2417/* I_SYSLOG:
2418 * This symbol, if defined, indicates that <syslog.h> exists and
2419 * should be included.
2420 */
2421/*#define I_SYSLOG / **/
2422
2423/* I_SYSMODE:
2424 * This symbol, if defined, indicates that <sys/mode.h> exists and
2425 * should be included.
2426 */
2427/*#define I_SYSMODE / **/
2428
2429/* I_SYS_MOUNT:
2430 * This symbol, if defined, indicates that <sys/mount.h> exists and
2431 * should be included.
2432 */
2433/*#define I_SYS_MOUNT / **/
2434
2435/* I_SYS_STATFS:
2436 * This symbol, if defined, indicates that <sys/statfs.h> exists.
2437 */
2438/*#define I_SYS_STATFS / **/
2439
2440/* I_SYS_STATVFS:
2441 * This symbol, if defined, indicates that <sys/statvfs.h> exists and
2442 * should be included.
2443 */
2444/*#define I_SYS_STATVFS / **/
2445
2446/* I_SYSUIO:
2447 * This symbol, if defined, indicates that <sys/uio.h> exists and
2448 * should be included.
2449 */
2450/*#define I_SYSUIO / **/
2451
2452/* I_SYSUTSNAME:
2453 * This symbol, if defined, indicates that <sys/utsname.h> exists and
2454 * should be included.
2455 */
2456/*#define I_SYSUTSNAME / **/
2457
2458/* I_SYS_VFS:
2459 * This symbol, if defined, indicates that <sys/vfs.h> exists and
2460 * should be included.
2461 */
2462/*#define I_SYS_VFS / **/
2463
2464/* I_TIME:
2465 * This symbol, if defined, indicates to the C program that it should
2466 * include <time.h>.
2467 */
2468/* I_SYS_TIME:
2469 * This symbol, if defined, indicates to the C program that it should
2470 * include <sys/time.h>.
2471 */
2472/* I_SYS_TIME_KERNEL:
2473 * This symbol, if defined, indicates to the C program that it should
2474 * include <sys/time.h> with KERNEL defined.
2475 */
2476#define I_TIME /**/
2477/*#define I_SYS_TIME / **/
2478/*#define I_SYS_TIME_KERNEL / **/
2479
2480/* I_USTAT:
2481 * This symbol, if defined, indicates that <ustat.h> exists and
2482 * should be included.
2483 */
2484/*#define I_USTAT / **/
2485
2486/* PERL_INC_VERSION_LIST:
2487 * This variable specifies the list of subdirectories in over
2488 * which perl.c:incpush() and lib/lib.pm will automatically
2489 * search when adding directories to @INC, in a format suitable
2490 * for a C initialization string. See the inc_version_list entry
2491 * in Porting/Glossary for more details.
2492 */
2493#define PERL_INC_VERSION_LIST NULL /**/
2494
2495/* INSTALL_USR_BIN_PERL:
2496 * This symbol, if defined, indicates that Perl is to be installed
2497 * also as /usr/bin/perl.
2498 */
2499/*#define INSTALL_USR_BIN_PERL / **/
2500
2501/* PERL_PRIfldbl:
2502 * This symbol, if defined, contains the string used by stdio to
2503 * format long doubles (format 'f') for output.
2504 */
2505/* PERL_PRIgldbl:
2506 * This symbol, if defined, contains the string used by stdio to
2507 * format long doubles (format 'g') for output.
2508 */
2509/*#define PERL_PRIfldbl "llf" / **/
2510/*#define PERL_PRIgldbl "llg" / **/
2511
2512/* Off_t:
2513 * This symbol holds the type used to declare offsets in the kernel.
2514 * It can be int, long, off_t, etc... It may be necessary to include
2515 * <sys/types.h> to get any typedef'ed information.
2516 */
2517/* LSEEKSIZE:
2518 * This symbol holds the number of bytes used by the Off_t.
2519 */
2520/* Off_t_size:
2521 * This symbol holds the number of bytes used by the Off_t.
2522 */
2523#define Off_t int /* <offset> type */
2524#define LSEEKSIZE 1 /* <offset> size */
2525#define Off_t_size 1 /* <offset> size */
2526
2527/* Free_t:
2528 * This variable contains the return type of free(). It is usually
2529 * void, but occasionally int.
2530 */
2531/* Malloc_t:
2532 * This symbol is the type of pointer returned by malloc and realloc.
2533 */
2534#define Malloc_t void * /**/
2535#define Free_t int /**/
2536
2537/* MYMALLOC:
2538 * This symbol, if defined, indicates that we're using our own malloc.
2539 */
2540/*#define MYMALLOC / **/
2541
2542/* Mode_t:
2543 * This symbol holds the type used to declare file modes
2544 * for systems calls. It is usually mode_t, but may be
2545 * int or unsigned short. It may be necessary to include <sys/types.h>
2546 * to get any typedef'ed information.
2547 */
2548#define Mode_t int /* file mode parameter for system calls */
2549
2550/* VAL_O_NONBLOCK:
2551 * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
2552 * non-blocking I/O for the file descriptor. Note that there is no way
2553 * back, i.e. you cannot turn it blocking again this way. If you wish to
2554 * alternatively switch between blocking and non-blocking, use the
2555 * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
2556 */
2557/* VAL_EAGAIN:
2558 * This symbol holds the errno error code set by read() when no data was
2559 * present on the non-blocking file descriptor.
2560 */
2561/* RD_NODATA:
2562 * This symbol holds the return code from read() when no data is present
2563 * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
2564 * not defined, then you can't distinguish between no data and EOF by
2565 * issuing a read(). You'll have to find another way to tell for sure!
2566 */
2567/* EOF_NONBLOCK:
2568 * This symbol, if defined, indicates to the C program that a read() on
2569 * a non-blocking file descriptor will return 0 on EOF, and not the value
2570 * held in RD_NODATA (-1 usually, in that case!).
2571 */
2572#define VAL_O_NONBLOCK O_NONBLOCK
2573#define VAL_EAGAIN EAGAIN
2574#define RD_NODATA -1
2575#undef EOF_NONBLOCK
2576
2577/* Netdb_host_t:
2578 * This symbol holds the type used for the 1st argument
2579 * to gethostbyaddr().
2580 */
2581/* Netdb_hlen_t:
2582 * This symbol holds the type used for the 2nd argument
2583 * to gethostbyaddr().
2584 */
2585/* Netdb_name_t:
2586 * This symbol holds the type used for the argument to
2587 * gethostbyname().
2588 */
2589/* Netdb_net_t:
2590 * This symbol holds the type used for the 1st argument to
2591 * getnetbyaddr().
2592 */
2593#define Netdb_host_t const char * /**/
2594#define Netdb_hlen_t int /**/
2595#define Netdb_name_t const char * /**/
2596#define Netdb_net_t unsigned long /**/
2597
2598/* PERL_OTHERLIBDIRS:
2599 * This variable contains a colon-separated set of paths for the perl
2600 * binary to search for additional library files or modules.
2601 * These directories will be tacked to the end of @INC.
2602 * Perl will automatically search below each path for version-
2603 * and architecture-specific directories. See PERL_INC_VERSION_LIST
2604 * for more details.
2605 */
2606/*#define PERL_OTHERLIBDIRS "" / **/
2607
2608/* IVTYPE:
2609 * This symbol defines the C type used for Perl's IV.
2610 */
2611/* UVTYPE:
2612 * This symbol defines the C type used for Perl's UV.
2613 */
2614/* I8TYPE:
2615 * This symbol defines the C type used for Perl's I8.
2616 */
2617/* U8TYPE:
2618 * This symbol defines the C type used for Perl's U8.
2619 */
2620/* I16TYPE:
2621 * This symbol defines the C type used for Perl's I16.
2622 */
2623/* U16TYPE:
2624 * This symbol defines the C type used for Perl's U16.
2625 */
2626/* I32TYPE:
2627 * This symbol defines the C type used for Perl's I32.
2628 */
2629/* U32TYPE:
2630 * This symbol defines the C type used for Perl's U32.
2631 */
2632/* I64TYPE:
2633 * This symbol defines the C type used for Perl's I64.
2634 */
2635/* U64TYPE:
2636 * This symbol defines the C type used for Perl's U64.
2637 */
2638/* NVTYPE:
2639 * This symbol defines the C type used for Perl's NV.
2640 */
2641/* IVSIZE:
2642 * This symbol contains the sizeof(IV).
2643 */
2644/* UVSIZE:
2645 * This symbol contains the sizeof(UV).
2646 */
2647/* I8SIZE:
2648 * This symbol contains the sizeof(I8).
2649 */
2650/* U8SIZE:
2651 * This symbol contains the sizeof(U8).
2652 */
2653/* I16SIZE:
2654 * This symbol contains the sizeof(I16).
2655 */
2656/* U16SIZE:
2657 * This symbol contains the sizeof(U16).
2658 */
2659/* I32SIZE:
2660 * This symbol contains the sizeof(I32).
2661 */
2662/* U32SIZE:
2663 * This symbol contains the sizeof(U32).
2664 */
2665/* I64SIZE:
2666 * This symbol contains the sizeof(I64).
2667 */
2668/* U64SIZE:
2669 * This symbol contains the sizeof(U64).
2670 */
2671/* NVSIZE:
2672 * This symbol contains the sizeof(NV).
2673 */
2674/* NV_PRESERVES_UV:
2675 * This symbol, if defined, indicates that a variable of type NVTYPE
2676 * can preserve all the bits of a variable of type UVTYPE.
2677 */
2678/* NV_PRESERVES_UV_BITS:
2679 * This symbol contains the number of bits a variable of type NVTYPE
2680 * can preserve of a variable of type UVTYPE.
2681 */
2682#define IVTYPE long /**/
2683#define UVTYPE unsigned long /**/
2684#define I8TYPE char /**/
2685#define U8TYPE unsigned char /**/
2686#define I16TYPE short /**/
2687#define U16TYPE unsigned short /**/
2688#define I32TYPE long /**/
2689#define U32TYPE unsigned long /**/
2690#ifdef HAS_QUAD
2691#define I64TYPE int64_t /**/
2692#define U64TYPE uint64_t /**/
2693#endif
2694#define NVTYPE double /**/
2695#define IVSIZE 4 /**/
2696#define UVSIZE 4 /**/
2697#define I8SIZE 1 /**/
2698#define U8SIZE 1 /**/
2699#define I16SIZE 2 /**/
2700#define U16SIZE 2 /**/
2701#define I32SIZE 4 /**/
2702#define U32SIZE 4 /**/
2703#ifdef HAS_QUAD
2704#define I64SIZE 8 /**/
2705#define U64SIZE 8 /**/
2706#endif
2707#define NVSIZE 8 /**/
2708#undef NV_PRESERVES_UV
2709#define NV_PRESERVES_UV_BITS
2710
2711/* IVdf:
2712 * This symbol defines the format string used for printing a Perl IV
2713 * as a signed decimal integer.
2714 */
2715/* UVuf:
2716 * This symbol defines the format string used for printing a Perl UV
2717 * as an unsigned decimal integer.
2718 */
2719/* UVof:
2720 * This symbol defines the format string used for printing a Perl UV
2721 * as an unsigned octal integer.
2722 */
2723/* UVxf:
2724 * This symbol defines the format string used for printing a Perl UV
2725 * as an unsigned hexadecimal integer.
2726 */
2727#define IVdf "ld" /**/
2728#define UVuf "lu" /**/
2729#define UVof "lo" /**/
2730#define UVxf "lx" /**/
2731
2732/* Pid_t:
2733 * This symbol holds the type used to declare process ids in the kernel.
2734 * It can be int, uint, pid_t, etc... It may be necessary to include
2735 * <sys/types.h> to get any typedef'ed information.
2736 */
2737#define Pid_t int /* PID type */
2738
2739/* PRIVLIB:
2740 * This symbol contains the name of the private library for this package.
2741 * The library is private in the sense that it needn't be in anyone's
2742 * execution path, but it should be accessible by the world. The program
2743 * should be prepared to do ~ expansion.
2744 */
2745/* PRIVLIB_EXP:
2746 * This symbol contains the ~name expanded version of PRIVLIB, to be used
2747 * in programs that are not prepared to deal with ~ expansion at run-time.
2748 */
2749#define PRIVLIB "/usr/local/lib/perl5/5.6" /**/
2750#define PRIVLIB_EXP "/usr/local/lib/perl5/5.6" /**/
2751
2752/* PTRSIZE:
2753 * This symbol contains the size of a pointer, so that the C preprocessor
2754 * can make decisions based on it. It will be sizeof(void *) if
2755 * the compiler supports (void *); otherwise it will be
2756 * sizeof(char *).
2757 */
2758#define PTRSIZE 1 /**/
2759
2760/* Drand01:
2761 * This macro is to be used to generate uniformly distributed
2762 * random numbers over the range [0., 1.[. You may have to supply
2763 * an 'extern double drand48();' in your program since SunOS 4.1.3
2764 * doesn't provide you with anything relevant in it's headers.
2765 * See HAS_DRAND48_PROTO.
2766 */
2767/* Rand_seed_t:
2768 * This symbol defines the type of the argument of the
2769 * random seed function.
2770 */
2771/* seedDrand01:
2772 * This symbol defines the macro to be used in seeding the
2773 * random number generator (see Drand01).
2774 */
2775/* RANDBITS:
2776 * This symbol indicates how many bits are produced by the
2777 * function used to generate normalized random numbers.
2778 * Values include 15, 16, 31, and 48.
2779 */
2780#define Drand01() ((rand() & 0x7FFF) / (double) ((unsigned long)1 << 15)) /**/
2781#define Rand_seed_t int /**/
2782#define seedDrand01(x) srand((Rand_seed_t)x) /**/
2783#define RANDBITS 48 /**/
2784
2785/* SELECT_MIN_BITS:
2786 * This symbol holds the minimum number of bits operated by select.
2787 * That is, if you do select(n, ...), how many bits at least will be
2788 * cleared in the masks if some activity is detected. Usually this
2789 * is either n or 32*ceil(n/32), especially many little-endians do
2790 * the latter. This is only useful if you have select(), naturally.
2791 */
2792#define SELECT_MIN_BITS 32 /**/
2793
2794/* Select_fd_set_t:
2795 * This symbol holds the type used for the 2nd, 3rd, and 4th
2796 * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
2797 * is defined, and 'int *' otherwise. This is only useful if you
2798 * have select(), of course.
2799 */
2800#define Select_fd_set_t int /**/
2801
2802/* SIG_NAME:
2803 * This symbol contains a list of signal names in order of
2804 * signal number. This is intended
2805 * to be used as a static array initialization, like this:
2806 * char *sig_name[] = { SIG_NAME };
2807 * The signals in the list are separated with commas, and each signal
2808 * is surrounded by double quotes. There is no leading SIG in the signal
2809 * name, i.e. SIGQUIT is known as "QUIT".
2810 * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
2811 * etc., where nn is the actual signal number (e.g. NUM37).
2812 * The signal number for sig_name[i] is stored in sig_num[i].
2813 * The last element is 0 to terminate the list with a NULL. This
2814 * corresponds to the 0 at the end of the sig_num list.
2815 */
2816/* SIG_NUM:
2817 * This symbol contains a list of signal numbers, in the same order as the
2818 * SIG_NAME list. It is suitable for static array initialization, as in:
2819 * int sig_num[] = { SIG_NUM };
2820 * The signals in the list are separated with commas, and the indices
2821 * within that list and the SIG_NAME list match, so it's easy to compute
2822 * the signal name from a number or vice versa at the price of a small
2823 * dynamic linear lookup.
2824 * Duplicates are allowed, but are moved to the end of the list.
2825 * The signal number corresponding to sig_name[i] is sig_number[i].
2826 * if (i < NSIG) then sig_number[i] == i.
2827 * The last element is 0, corresponding to the 0 at the end of
2828 * the sig_name list.
2829 */
2830#define SIG_NAME 0 /**/
2831#define SIG_NUM 0 /**/
2832
2833/* SITEARCH:
2834 * This symbol contains the name of the private library for this package.
2835 * The library is private in the sense that it needn't be in anyone's
2836 * execution path, but it should be accessible by the world. The program
2837 * should be prepared to do ~ expansion.
2838 * The standard distribution will put nothing in this directory.
2839 * After perl has been installed, users may install their own local
2840 * architecture-dependent modules in this directory with
2841 * MakeMaker Makefile.PL
2842 * or equivalent. See INSTALL for details.
2843 */
2844/* SITEARCH_EXP:
2845 * This symbol contains the ~name expanded version of SITEARCH, to be used
2846 * in programs that are not prepared to deal with ~ expansion at run-time.
2847 */
2848#define SITEARCH "" /**/
2849#define SITEARCH_EXP "" /**/
2850
2851/* SITELIB:
2852 * This symbol contains the name of the private library for this package.
2853 * The library is private in the sense that it needn't be in anyone's
2854 * execution path, but it should be accessible by the world. The program
2855 * should be prepared to do ~ expansion.
2856 * The standard distribution will put nothing in this directory.
2857 * After perl has been installed, users may install their own local
2858 * architecture-independent modules in this directory with
2859 * MakeMaker Makefile.PL
2860 * or equivalent. See INSTALL for details.
2861 */
2862/* SITELIB_EXP:
2863 * This symbol contains the ~name expanded version of SITELIB, to be used
2864 * in programs that are not prepared to deal with ~ expansion at run-time.
2865 */
2866/* SITELIB_STEM:
2867 * This define is SITELIB_EXP with any trailing version-specific component
2868 * removed. The elements in inc_version_list (inc_version_list.U) can
2869 * be tacked onto this variable to generate a list of directories to search.
2870 */
2871#define SITELIB "" /**/
2872#define SITELIB_EXP "" /**/
2873#define SITELIB_STEM "" /**/
2874
2875/* Size_t_size:
2876 * This symbol holds the size of a Size_t in bytes.
2877 */
2878#define Size_t_size 1 /* */
2879
2880/* Size_t:
2881 * This symbol holds the type used to declare length parameters
2882 * for string functions. It is usually size_t, but may be
2883 * unsigned long, int, etc. It may be necessary to include
2884 * <sys/types.h> to get any typedef'ed information.
2885 */
2886#define Size_t int /* length paramater for string functions */
2887
2888/* Sock_size_t:
2889 * This symbol holds the type used for the size argument of
2890 * various socket calls (just the base type, not the pointer-to).
2891 */
2892#define Sock_size_t int /**/
2893
2894/* SSize_t:
2895 * This symbol holds the type used by functions that return
2896 * a count of bytes or an error condition. It must be a signed type.
2897 * It is usually ssize_t, but may be long or int, etc.
2898 * It may be necessary to include <sys/types.h> or <unistd.h>
2899 * to get any typedef'ed information.
2900 * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
2901 */
2902#define SSize_t int /* signed count of bytes */
2903
2904/* STARTPERL:
2905 * This variable contains the string to put in front of a perl
2906 * script to make sure (one hopes) that it runs with perl and not
2907 * some shell.
2908 */
2909#define STARTPERL "" /**/
2910
2911/* HAS_STDIO_STREAM_ARRAY:
2912 * This symbol, if defined, tells that there is an array
2913 * holding the stdio streams.
2914 */
2915/* STDIO_STREAM_ARRAY:
2916 * This symbol tells the name of the array holding the stdio streams.
2917 * Usual values include _iob, __iob, and __sF.
2918 */
2919/*#define HAS_STDIO_STREAM_ARRAY / **/
2920#define STDIO_STREAM_ARRAY
2921
2922/* Uid_t_f:
2923 * This symbol defines the format string used for printing a Uid_t.
2924 */
2925#define Uid_t_f "lu" /**/
2926
2927/* Uid_t_sign:
2928 * This symbol holds the signedess of a Uid_t.
2929 * 1 for unsigned, -1 for signed.
2930 */
2931#define Uid_t_sign 1 /* UID sign */
2932
2933/* Uid_t_size:
2934 * This symbol holds the size of a Uid_t in bytes.
2935 */
2936#define Uid_t_size 4 /* UID size */
2937
2938/* Uid_t:
2939 * This symbol holds the type used to declare user ids in the kernel.
2940 * It can be int, ushort, uid_t, etc... It may be necessary to include
2941 * <sys/types.h> to get any typedef'ed information.
2942 */
2943#define Uid_t int /* UID type */
2944
2945/* USE_64_BIT_INT:
2946 * This symbol, if defined, indicates that 64-bit integers should
2947 * be used when available. If not defined, the native integers
2948 * will be employed (be they 32 or 64 bits). The minimal possible
2949 * 64-bitness is used, just enough to get 64-bit integers into Perl.
2950 * This may mean using for example "long longs", while your memory
2951 * may still be limited to 2 gigabytes.
2952 */
2953/* USE_64_BIT_ALL:
2954 * This symbol, if defined, indicates that 64-bit integers should
2955 * be used when available. If not defined, the native integers
2956 * will be used (be they 32 or 64 bits). The maximal possible
2957 * 64-bitness is employed: LP64 or ILP64, meaning that you will
2958 * be able to use more than 2 gigabytes of memory. This mode is
2959 * even more binary incompatible than USE_64_BIT_INT. You may not
2960 * be able to run the resulting executable in a 32-bit CPU at all or
2961 * you may need at least to reboot your OS to 64-bit mode.
2962 */
2963#ifndef USE_64_BIT_INT
2964/*#define USE_64_BIT_INT / **/
2965#endif
2966
2967#ifndef USE_64_BIT_ALL
2968/*#define USE_64_BIT_ALL / **/
2969#endif
2970
2971/* USE_LARGE_FILES:
2972 * This symbol, if defined, indicates that large file support
2973 * should be used when available.
2974 */
2975#ifndef USE_LARGE_FILES
2976/*#define USE_LARGE_FILES / **/
2977#endif
2978
2979/* USE_LONG_DOUBLE:
2980 * This symbol, if defined, indicates that long doubles should
2981 * be used when available.
2982 */
2983#ifndef USE_LONG_DOUBLE
2984/*#define USE_LONG_DOUBLE / **/
2985#endif
2986
2987/* USE_MORE_BITS:
2988 * This symbol, if defined, indicates that 64-bit interfaces and
2989 * long doubles should be used when available.
2990 */
2991#ifndef USE_MORE_BITS
2992/*#define USE_MORE_BITS / **/
2993#endif
2994
2995/* MULTIPLICITY:
2996 * This symbol, if defined, indicates that Perl should
2997 * be built to use multiplicity.
2998 */
2999#ifndef MULTIPLICITY
3000/*#define MULTIPLICITY / **/
3001#endif
3002
3003/* USE_PERLIO:
3004 * This symbol, if defined, indicates that the PerlIO abstraction should
3005 * be used throughout. If not defined, stdio should be
3006 * used in a fully backward compatible manner.
3007 */
3008#ifndef USE_PERLIO
3009/*#define USE_PERLIO / **/
3010#endif
3011
3012/* USE_SOCKS:
3013 * This symbol, if defined, indicates that Perl should
3014 * be built to use socks.
3015 */
3016#ifndef USE_SOCKS
3017/*#define USE_SOCKS / **/
3018#endif
3019
3020/* USE_ITHREADS:
3021 * This symbol, if defined, indicates that Perl should be built to
3022 * use the interpreter-based threading implementation.
3023 */
3024/* USE_5005THREADS:
3025 * This symbol, if defined, indicates that Perl should be built to
3026 * use the 5.005-based threading implementation.
3027 */
3028/* OLD_PTHREADS_API:
3029 * This symbol, if defined, indicates that Perl should
3030 * be built to use the old draft POSIX threads API.
3031 */
3032/*#define USE_5005THREADS / **/
3033/*#define USE_ITHREADS / **/
3034#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
3035#define USE_THREADS /* until src is revised*/
3036#endif
3037/*#define OLD_PTHREADS_API / **/
3038
3039/* PERL_VENDORARCH:
3040 * If defined, this symbol contains the name of a private library.
3041 * The library is private in the sense that it needn't be in anyone's
3042 * execution path, but it should be accessible by the world.
3043 * It may have a ~ on the front.
3044 * The standard distribution will put nothing in this directory.
3045 * Vendors who distribute perl may wish to place their own
3046 * architecture-dependent modules and extensions in this directory with
3047 * MakeMaker Makefile.PL INSTALLDIRS=vendor
3048 * or equivalent. See INSTALL for details.
3049 */
3050/* PERL_VENDORARCH_EXP:
3051 * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
3052 * in programs that are not prepared to deal with ~ expansion at run-time.
3053 */
3054/*#define PERL_VENDORARCH "" / **/
3055/*#define PERL_VENDORARCH_EXP "" / **/
3056
3057/* PERL_VENDORLIB_EXP:
3058 * This symbol contains the ~name expanded version of VENDORLIB, to be used
3059 * in programs that are not prepared to deal with ~ expansion at run-time.
3060 */
3061/* PERL_VENDORLIB_STEM:
3062 * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
3063 * removed. The elements in inc_version_list (inc_version_list.U) can
3064 * be tacked onto this variable to generate a list of directories to search.
3065 */
3066/*#define PERL_VENDORLIB_EXP "" / **/
3067/*#define PERL_VENDORLIB_STEM "" / **/
3068
3069/* VOIDFLAGS:
3070 * This symbol indicates how much support of the void type is given by this
3071 * compiler. What various bits mean:
3072 *
3073 * 1 = supports declaration of void
3074 * 2 = supports arrays of pointers to functions returning void
3075 * 4 = supports comparisons between pointers to void functions and
3076 * addresses of void functions
3077 * 8 = suports declaration of generic void pointers
3078 *
3079 * The package designer should define VOIDUSED to indicate the requirements
3080 * of the package. This can be done either by #defining VOIDUSED before
3081 * including config.h, or by defining defvoidused in Myinit.U. If the
3082 * latter approach is taken, only those flags will be tested. If the
3083 * level of void support necessary is not present, defines void to int.
3084 */
3085#ifndef VOIDUSED
3086#define VOIDUSED 1
3087#endif
3088#define VOIDFLAGS 1
3089#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
3090#define void int /* is void to be avoided? */
3091#define M_VOID /* Xenix strikes again */
3092#endif
3093
3094/* PERL_XS_APIVERSION:
3095 * This variable contains the version of the oldest perl binary
3096 * compatible with the present perl. perl.c:incpush() and
3097 * lib/lib.pm will automatically search in for older
3098 * directories across major versions back to xs_apiversion.
3099 * This is only useful if you have a perl library directory tree
3100 * structured like the default one.
3101 * See INSTALL for how this works.
3102 * The versioned site_perl directory was introduced in 5.005,
3103 * so that is the lowest possible value.
3104 * Since this can depend on compile time options (such as
3105 * bincompat) it is set by Configure. Other non-default sources
3106 * of potential incompatibility, such as multiplicity, threads,
3107 * debugging, 64bits, sfio, etc., are not checked for currently,
3108 * though in principle we could go snooping around in old
3109 * Config.pm files.
3110 */
3111/* PERL_PM_APIVERSION:
3112 * This variable contains the version of the oldest perl
3113 * compatible with the present perl. (That is, pure perl modules
3114 * written for pm_apiversion will still work for the current
3115 * version). perl.c:incpush() and lib/lib.pm will automatically
3116 * search in for older directories across major versions
3117 * back to pm_apiversion. This is only useful if you have a perl
3118 * library directory tree structured like the default one. The
3119 * versioned site_perl library was introduced in 5.005, so that's
3120 * the default setting for this variable. It's hard to imagine
3121 * it changing before Perl6. It is included here for symmetry
3122 * with xs_apiveprsion -- the searching algorithms will
3123 * (presumably) be similar.
3124 * See the INSTALL file for how this works.
3125 */
3126#define PERL_XS_APIVERSION "5.005"
3127#define PERL_PM_APIVERSION "5.005"
3128
3129#endif