This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
Split CXt_LOOP into CXt_LOOP_PLAIN and CXt_LOOP_FOR, eliminating the
[perl5.git] / cop.h
CommitLineData
a0d0e21e 1/* cop.h
79072805 2 *
4bb101f2 3 * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
663f364b 4 * 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, by Larry Wall and others
79072805
LW
5 *
6 * You may distribute under the terms of either the GNU General Public
7 * License or the Artistic License, as specified in the README file.
8 *
a3985cdc 9 * Control ops (cops) are one of the three ops OP_NEXTSTATE, OP_DBSTATE,
3ffa1527
JH
10 * and OP_SETSTATE that (loosely speaking) are separate statements.
11 * They hold information important for lexical state and error reporting.
12 * At run time, PL_curcop is set to point to the most recently executed cop,
a3985cdc 13 * and thus can be used to determine our current state.
79072805
LW
14 */
15
0d2925a6
DM
16/* A jmpenv packages the state required to perform a proper non-local jump.
17 * Note that there is a start_env initialized when perl starts, and top_env
18 * points to this initially, so top_env should always be non-null.
19 *
20 * Existence of a non-null top_env->je_prev implies it is valid to call
21 * longjmp() at that runlevel (we make sure start_env.je_prev is always
22 * null to ensure this).
23 *
24 * je_mustcatch, when set at any runlevel to TRUE, means eval ops must
25 * establish a local jmpenv to handle exception traps. Care must be taken
26 * to restore the previous value of je_mustcatch before exiting the
27 * stack frame iff JMPENV_PUSH was not called in that stack frame.
28 * GSAR 97-03-27
29 */
30
31struct jmpenv {
32 struct jmpenv * je_prev;
33 Sigjmp_buf je_buf; /* only for use if !je_throw */
34 int je_ret; /* last exception thrown */
35 bool je_mustcatch; /* need to call longjmp()? */
36};
37
38typedef struct jmpenv JMPENV;
39
40#ifdef OP_IN_REGISTER
41#define OP_REG_TO_MEM PL_opsave = op
42#define OP_MEM_TO_REG op = PL_opsave
43#else
44#define OP_REG_TO_MEM NOOP
45#define OP_MEM_TO_REG NOOP
46#endif
47
48/*
49 * How to build the first jmpenv.
50 *
51 * top_env needs to be non-zero. It points to an area
52 * in which longjmp() stuff is stored, as C callstack
53 * info there at least is thread specific this has to
54 * be per-thread. Otherwise a 'die' in a thread gives
55 * that thread the C stack of last thread to do an eval {}!
56 */
57
58#define JMPENV_BOOTSTRAP \
59 STMT_START { \
60 Zero(&PL_start_env, 1, JMPENV); \
61 PL_start_env.je_ret = -1; \
62 PL_start_env.je_mustcatch = TRUE; \
63 PL_top_env = &PL_start_env; \
64 } STMT_END
65
66/*
67 * PERL_FLEXIBLE_EXCEPTIONS
68 *
69 * All the flexible exceptions code has been removed.
70 * See the following threads for details:
71 *
72 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2004-07/msg00378.html
73 *
74 * Joshua's original patches (which weren't applied) and discussion:
75 *
76 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01396.html
77 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01489.html
78 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01491.html
79 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01608.html
80 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02144.html
81 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02998.html
82 *
83 * Chip's reworked patch and discussion:
84 *
85 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1999-03/msg00520.html
86 *
87 * The flaw in these patches (which went unnoticed at the time) was
88 * that they moved some code that could potentially die() out of the
89 * region protected by the setjmp()s. This caused exceptions within
90 * END blocks and such to not be handled by the correct setjmp().
91 *
92 * The original patches that introduces flexible exceptions were:
93 *
94 * http://public.activestate.com/cgi-bin/perlbrowse?patch=3386
95 * http://public.activestate.com/cgi-bin/perlbrowse?patch=5162
96 */
97
98#define dJMPENV JMPENV cur_env
99
100#define JMPENV_PUSH(v) \
101 STMT_START { \
102 DEBUG_l(Perl_deb(aTHX_ "Setting up jumplevel %p, was %p\n", \
ca0270c4 103 (void*)&cur_env, (void*)PL_top_env)); \
0d2925a6
DM
104 cur_env.je_prev = PL_top_env; \
105 OP_REG_TO_MEM; \
106 cur_env.je_ret = PerlProc_setjmp(cur_env.je_buf, SCOPE_SAVES_SIGNAL_MASK); \
107 OP_MEM_TO_REG; \
108 PL_top_env = &cur_env; \
109 cur_env.je_mustcatch = FALSE; \
110 (v) = cur_env.je_ret; \
111 } STMT_END
112
113#define JMPENV_POP \
114 STMT_START { \
115 DEBUG_l(Perl_deb(aTHX_ "popping jumplevel was %p, now %p\n", \
ca0270c4 116 (void*)PL_top_env, (void*)cur_env.je_prev)); \
0d2925a6
DM
117 PL_top_env = cur_env.je_prev; \
118 } STMT_END
119
120#define JMPENV_JUMP(v) \
121 STMT_START { \
122 OP_REG_TO_MEM; \
123 if (PL_top_env->je_prev) \
124 PerlProc_longjmp(PL_top_env->je_buf, (v)); \
125 if ((v) == 2) \
37038d91 126 PerlProc_exit(STATUS_EXIT); \
0d2925a6
DM
127 PerlIO_printf(PerlIO_stderr(), "panic: top_env\n"); \
128 PerlProc_exit(1); \
129 } STMT_END
130
131#define CATCH_GET (PL_top_env->je_mustcatch)
132#define CATCH_SET(v) (PL_top_env->je_mustcatch = (v))
133
134
5ac1e9b2 135#include "mydtrace.h"
0d2925a6 136
79072805
LW
137struct cop {
138 BASEOP
d7f23a06
NC
139 /* On LP64 putting this here takes advantage of the fact that BASEOP isn't
140 an exact multiple of 8 bytes to save structure padding. */
141 line_t cop_line; /* line # of this command */
a0d0e21e 142 char * cop_label; /* label for this construct */
57843af0 143#ifdef USE_ITHREADS
11faa288 144 char * cop_stashpv; /* package line was compiled in */
57843af0
GS
145 char * cop_file; /* file name the following line # is from */
146#else
11faa288 147 HV * cop_stash; /* package line was compiled in */
79072805 148 GV * cop_filegv; /* file the following line # is from */
57843af0 149#endif
d5ec2987 150 U32 cop_hints; /* hints bits from pragmata */
a0d0e21e 151 U32 cop_seq; /* parse sequence number */
72dc9ed5
NC
152 /* Beware. mg.c and warnings.pl assume the type of this is STRLEN *: */
153 STRLEN * cop_warnings; /* lexical warnings bitmask */
b3ca2e83
NC
154 /* compile time state of %^H. See the comment in op.c for how this is
155 used to recreate a hash to return from caller. */
c28fe1ec 156 struct refcounted_he * cop_hints_hash;
79072805
LW
157};
158
57843af0
GS
159#ifdef USE_ITHREADS
160# define CopFILE(c) ((c)->cop_file)
161# define CopFILEGV(c) (CopFILE(c) \
a0714e2c 162 ? gv_fetchfile(CopFILE(c)) : NULL)
083fcd59 163
7e4e8c89
NC
164# ifdef NETWARE
165# define CopFILE_set(c,pv) ((c)->cop_file = savepv(pv))
d9095cec 166# define CopFILE_setn(c,pv,l) ((c)->cop_file = savepv((pv),(l)))
7e4e8c89
NC
167# else
168# define CopFILE_set(c,pv) ((c)->cop_file = savesharedpv(pv))
d9095cec 169# define CopFILE_setn(c,pv,l) ((c)->cop_file = savesharedpvn((pv),(l)))
7e4e8c89 170# endif
083fcd59 171
57843af0 172# define CopFILESV(c) (CopFILE(c) \
a0714e2c 173 ? GvSV(gv_fetchfile(CopFILE(c))) : NULL)
57843af0 174# define CopFILEAV(c) (CopFILE(c) \
7d49f689 175 ? GvAV(gv_fetchfile(CopFILE(c))) : NULL)
8688788e
SH
176# ifdef DEBUGGING
177# define CopFILEAVx(c) (assert(CopFILE(c)), \
36c7798d 178 GvAV(gv_fetchfile(CopFILE(c))))
8688788e
SH
179# else
180# define CopFILEAVx(c) (GvAV(gv_fetchfile(CopFILE(c))))
181# endif
57843af0 182# define CopSTASHPV(c) ((c)->cop_stashpv)
083fcd59 183
7e4e8c89 184# ifdef NETWARE
bd61b366 185# define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = ((pv) ? savepv(pv) : NULL))
7e4e8c89
NC
186# else
187# define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = savesharedpv(pv))
188# endif
083fcd59 189
11faa288 190# define CopSTASH(c) (CopSTASHPV(c) \
5c284bb0 191 ? gv_stashpv(CopSTASHPV(c),GV_ADD) : NULL)
bd61b366 192# define CopSTASH_set(c,hv) CopSTASHPV_set(c, (hv) ? HvNAME_get(hv) : NULL)
ed221c57 193# define CopSTASH_eq(c,hv) ((hv) && stashpv_hvname_match(c,hv))
6a3d5e3d 194# define CopLABEL(c) ((c)->cop_label)
63031daf 195# define CopLABEL_set(c,pv) (CopLABEL(c) = (pv))
7e4e8c89
NC
196# ifdef NETWARE
197# define CopSTASH_free(c) SAVECOPSTASH_FREE(c)
7e4e8c89 198# define CopFILE_free(c) SAVECOPFILE_FREE(c)
6a3d5e3d 199# define CopLABEL_free(c) SAVECOPLABEL_FREE(c)
63031daf 200# define CopLABEL_alloc(pv) ((pv)?savepv(pv):NULL)
7e4e8c89 201# else
ed221c57 202# define CopSTASH_free(c) PerlMemShared_free(CopSTASHPV(c))
bd61b366 203# define CopFILE_free(c) (PerlMemShared_free(CopFILE(c)),(CopFILE(c) = NULL))
6a3d5e3d 204# define CopLABEL_free(c) (PerlMemShared_free(CopLABEL(c)),(CopLABEL(c) = NULL))
63031daf 205# define CopLABEL_alloc(pv) ((pv)?savesharedpv(pv):NULL)
7e4e8c89 206# endif
57843af0
GS
207#else
208# define CopFILEGV(c) ((c)->cop_filegv)
f4dd75d9
GS
209# define CopFILEGV_set(c,gv) ((c)->cop_filegv = (GV*)SvREFCNT_inc(gv))
210# define CopFILE_set(c,pv) CopFILEGV_set((c), gv_fetchfile(pv))
d9095cec 211# define CopFILE_setn(c,pv,l) CopFILEGV_set((c), gv_fetchfile_flags((pv),(l),0))
a0714e2c 212# define CopFILESV(c) (CopFILEGV(c) ? GvSV(CopFILEGV(c)) : NULL)
7d49f689 213# define CopFILEAV(c) (CopFILEGV(c) ? GvAV(CopFILEGV(c)) : NULL)
8688788e
SH
214# ifdef DEBUGGING
215# define CopFILEAVx(c) (assert(CopFILEGV(c)), GvAV(CopFILEGV(c)))
216# else
217# define CopFILEAVx(c) (GvAV(CopFILEGV(c)))
218# endif
be46dfad
RGS
219# define CopFILE(c) (CopFILEGV(c) && GvSV(CopFILEGV(c)) \
220 ? SvPVX(GvSV(CopFILEGV(c))) : NULL)
57843af0 221# define CopSTASH(c) ((c)->cop_stash)
6a3d5e3d 222# define CopLABEL(c) ((c)->cop_label)
f4dd75d9 223# define CopSTASH_set(c,hv) ((c)->cop_stash = (hv))
bd61b366 224# define CopSTASHPV(c) (CopSTASH(c) ? HvNAME_get(CopSTASH(c)) : NULL)
f4dd75d9
GS
225 /* cop_stash is not refcounted */
226# define CopSTASHPV_set(c,pv) CopSTASH_set((c), gv_stashpv(pv,GV_ADD))
227# define CopSTASH_eq(c,hv) (CopSTASH(c) == (hv))
63031daf 228# define CopLABEL_alloc(pv) ((pv)?savepv(pv):NULL)
6a3d5e3d 229# define CopLABEL_set(c,pv) (CopLABEL(c) = (pv))
05ec9bb3 230# define CopSTASH_free(c)
a0714e2c 231# define CopFILE_free(c) (SvREFCNT_dec(CopFILEGV(c)),(CopFILEGV(c) = NULL))
63031daf 232# define CopLABEL_free(c) (Safefree(CopLABEL(c)),(CopLABEL(c) = NULL))
05ec9bb3 233
57843af0
GS
234#endif /* USE_ITHREADS */
235
ed094faf 236#define CopSTASH_ne(c,hv) (!CopSTASH_eq(c,hv))
cc49e20b 237#define CopLINE(c) ((c)->cop_line)
57843af0
GS
238#define CopLINE_inc(c) (++CopLINE(c))
239#define CopLINE_dec(c) (--CopLINE(c))
240#define CopLINE_set(c,l) (CopLINE(c) = (l))
cc49e20b 241
248c2a4d
CN
242/* OutCopFILE() is CopFILE for output (caller, die, warn, etc.) */
243#ifdef MACOS_TRADITIONAL
244# define OutCopFILE(c) MacPerl_MPWFileName(CopFILE(c))
245#else
246# define OutCopFILE(c) CopFILE(c)
247#endif
248
7b0bddfa
NC
249/* If $[ is non-zero, it's stored in cop_hints under the key "$[", and
250 HINT_ARYBASE is set to indicate this.
251 Setting it is ineficient due to the need to create 2 mortal SVs, but as
252 using $[ is highly discouraged, no sane Perl code will be using it. */
253#define CopARYBASE_get(c) \
254 ((CopHINTS_get(c) & HINT_ARYBASE) \
c28fe1ec
NC
255 ? SvIV(Perl_refcounted_he_fetch(aTHX_ (c)->cop_hints_hash, 0, \
256 "$[", 2, 0, 0)) \
7b0bddfa
NC
257 : 0)
258#define CopARYBASE_set(c, b) STMT_START { \
d5ec2987
NC
259 if (b || ((c)->cop_hints & HINT_ARYBASE)) { \
260 (c)->cop_hints |= HINT_ARYBASE; \
7b0bddfa
NC
261 if ((c) == &PL_compiling) \
262 PL_hints |= HINT_LOCALIZE_HH | HINT_ARYBASE; \
c28fe1ec
NC
263 (c)->cop_hints_hash \
264 = Perl_refcounted_he_new(aTHX_ (c)->cop_hints_hash, \
84bafc02 265 newSVpvs_flags("$[", SVs_TEMP), \
7b0bddfa
NC
266 sv_2mortal(newSViv(b))); \
267 } \
268 } STMT_END
fc15ae8f 269
623e6609 270/* FIXME NATIVE_HINTS if this is changed from op_private (see perl.h) */
d5ec2987 271#define CopHINTS_get(c) ((c)->cop_hints + 0)
623e6609 272#define CopHINTS_set(c, h) STMT_START { \
d5ec2987 273 (c)->cop_hints = (h); \
623e6609
NC
274 } STMT_END
275
79072805
LW
276/*
277 * Here we have some enormously heavy (or at least ponderous) wizardry.
278 */
279
280/* subroutine context */
281struct block_sub {
f9c764c5 282 OP * retop; /* op to execute on exit from sub */
8e663997
NC
283 /* Above here is the same for sub, format and eval. */
284 CV * cv;
f9c764c5 285 /* Above here is the same for sub and format. */
79072805
LW
286 AV * savearray;
287 AV * argarray;
bb172083 288 I32 olddepth;
f3548bdc 289 PAD *oldcomppad;
f9c764c5
NC
290};
291
292
293/* format context */
294struct block_format {
f39bc417 295 OP * retop; /* op to execute on exit from sub */
8e663997
NC
296 /* Above here is the same for sub, format and eval. */
297 CV * cv;
f9c764c5
NC
298 /* Above here is the same for sub and format. */
299 GV * gv;
300 GV * dfoutgv;
79072805
LW
301};
302
b36bdeca
DM
303/* base for the next two macros. Don't use directly.
304 * Note that the refcnt of the cv is incremented twice; The CX one is
305 * decremented by LEAVESUB, the other by LEAVE. */
306
ee98a1d6 307#define PUSHSUB_BASE(cx) \
5ac1e9b2
AA
308 ENTRY_PROBE(GvENAME(CvGV(cv)), \
309 CopFILE((COP*)CvSTART(cv)), \
310 CopLINE((COP*)CvSTART(cv))); \
311 \
79072805 312 cx->blk_sub.cv = cv; \
b8f55b69 313 cx->blk_sub.olddepth = CvDEPTH(cv); \
ae423868 314 cx->cx_type |= (hasargs) ? CXp_HASARGS : 0; \
5f66b61c 315 cx->blk_sub.retop = NULL; \
b36bdeca 316 if (!CvDEPTH(cv)) { \
74c765eb
AL
317 SvREFCNT_inc_simple_void_NN(cv); \
318 SvREFCNT_inc_simple_void_NN(cv); \
b36bdeca
DM
319 SAVEFREESV(cv); \
320 }
321
ee98a1d6
DM
322
323#define PUSHSUB(cx) \
324 PUSHSUB_BASE(cx) \
446d0787 325 cx->blk_u16 = PL_op->op_private & \
cc8d50a7 326 (OPpLVAL_INTRO|OPpENTERSUB_INARGS);
79072805 327
ee98a1d6
DM
328/* variant for use by OP_DBSTATE, where op_private holds hint bits */
329#define PUSHSUB_DB(cx) \
330 PUSHSUB_BASE(cx) \
446d0787 331 cx->blk_u16 = 0;
ee98a1d6
DM
332
333
10067d9a 334#define PUSHFORMAT(cx, retop) \
f9c764c5
NC
335 cx->blk_format.cv = cv; \
336 cx->blk_format.gv = gv; \
337 cx->blk_format.retop = (retop); \
f9c764c5
NC
338 cx->blk_format.dfoutgv = PL_defoutgv; \
339 SvREFCNT_inc_void(cx->blk_format.dfoutgv)
79072805 340
3db8f154 341#define POP_SAVEARRAY() \
6d4ff0d2 342 STMT_START { \
3280af22 343 SvREFCNT_dec(GvAV(PL_defgv)); \
a8bba7fa 344 GvAV(PL_defgv) = cx->blk_sub.savearray; \
6d4ff0d2 345 } STMT_END
6d4ff0d2 346
ecf8e9dd 347/* junk in @_ spells trouble when cloning CVs and in pp_caller(), so don't
8e09340b
GS
348 * leave any (a fast av_clear(ary), basically) */
349#define CLEAR_ARGARRAY(ary) \
350 STMT_START { \
351 AvMAX(ary) += AvARRAY(ary) - AvALLOC(ary); \
9c6bc640 352 AvARRAY(ary) = AvALLOC(ary); \
8e09340b
GS
353 AvFILLp(ary) = -1; \
354 } STMT_END
7766f137 355
b0d9ce38
GS
356#define POPSUB(cx,sv) \
357 STMT_START { \
5ac1e9b2
AA
358 RETURN_PROBE(GvENAME(CvGV((CV*)cx->blk_sub.cv)), \
359 CopFILE((COP*)CvSTART((CV*)cx->blk_sub.cv)), \
360 CopLINE((COP*)CvSTART((CV*)cx->blk_sub.cv))); \
361 \
bafb2adc 362 if (CxHASARGS(cx)) { \
7766f137 363 POP_SAVEARRAY(); \
d8b46c1b 364 /* abandon @_ if it got reified */ \
a8bba7fa 365 if (AvREAL(cx->blk_sub.argarray)) { \
e2d306cb 366 const SSize_t fill = AvFILLp(cx->blk_sub.argarray); \
a8bba7fa
GS
367 SvREFCNT_dec(cx->blk_sub.argarray); \
368 cx->blk_sub.argarray = newAV(); \
369 av_extend(cx->blk_sub.argarray, fill); \
11ca45c0 370 AvREIFY_only(cx->blk_sub.argarray); \
dd2155a4 371 CX_CURPAD_SV(cx->blk_sub, 0) = (SV*)cx->blk_sub.argarray; \
d8b46c1b 372 } \
7766f137 373 else { \
8e09340b 374 CLEAR_ARGARRAY(cx->blk_sub.argarray); \
7766f137 375 } \
79072805 376 } \
b0d9ce38
GS
377 sv = (SV*)cx->blk_sub.cv; \
378 if (sv && (CvDEPTH((CV*)sv) = cx->blk_sub.olddepth)) \
a0714e2c 379 sv = NULL; \
b0d9ce38
GS
380 } STMT_END
381
382#define LEAVESUB(sv) \
383 STMT_START { \
384 if (sv) \
385 SvREFCNT_dec(sv); \
386 } STMT_END
79072805
LW
387
388#define POPFORMAT(cx) \
f9c764c5
NC
389 setdefout(cx->blk_format.dfoutgv); \
390 SvREFCNT_dec(cx->blk_format.dfoutgv);
79072805
LW
391
392/* eval context */
393struct block_eval {
8e663997
NC
394 OP * retop; /* op to execute on exit from eval */
395 /* Above here is the same for sub, format and eval. */
0f79a09d 396 SV * old_namesv;
79072805 397 OP * old_eval_root;
748a9306 398 SV * cur_text;
2090ab20 399 CV * cv;
abd70938 400 JMPENV * cur_top_env; /* value of PL_top_env when eval CX created */
79072805
LW
401};
402
17347a51
NC
403/* If we ever need more than 512 op types, change the shift from 7.
404 blku_gimme is actually also only 2 bits, so could be merged with something.
405*/
406
407#define CxOLD_IN_EVAL(cx) (((cx)->blk_u16) & 0x7F)
408#define CxOLD_OP_TYPE(cx) (((cx)->blk_u16) >> 7)
85a64632 409
8990e307 410#define PUSHEVAL(cx,n,fgv) \
0f79a09d 411 STMT_START { \
17347a51
NC
412 assert(!(PL_in_eval & ~0x7F)); \
413 assert(!(PL_op->op_type & ~0x1FF)); \
414 cx->blk_u16 = (PL_in_eval & 0x7F) | ((U16)PL_op->op_type << 7); \
a0714e2c 415 cx->blk_eval.old_namesv = (n ? newSVpv(n,0) : NULL); \
a8bba7fa 416 cx->blk_eval.old_eval_root = PL_eval_root; \
bdc0bf6f 417 cx->blk_eval.cur_text = PL_parser ? PL_parser->linestr : NULL; \
601f1833 418 cx->blk_eval.cv = NULL; /* set by doeval(), as applicable */ \
5f66b61c 419 cx->blk_eval.retop = NULL; \
abd70938 420 cx->blk_eval.cur_top_env = PL_top_env; \
0f79a09d 421 } STMT_END
79072805
LW
422
423#define POPEVAL(cx) \
0f79a09d 424 STMT_START { \
85a64632
NC
425 PL_in_eval = CxOLD_IN_EVAL(cx); \
426 optype = CxOLD_OP_TYPE(cx); \
7766f137 427 PL_eval_root = cx->blk_eval.old_eval_root; \
0f79a09d
GS
428 if (cx->blk_eval.old_namesv) \
429 sv_2mortal(cx->blk_eval.old_namesv); \
430 } STMT_END
79072805
LW
431
432/* loop context */
433struct block_loop {
79072805 434 I32 resetsp;
022eaa24
NC
435 LOOP * my_op; /* My op, that contains redo, next and last ops. */
436 /* (except for non_ithreads we need to modify next_op in pp_ctl.c, hence
437 why next_op is conditionally defined below.) */
7766f137
GS
438#ifdef USE_ITHREADS
439 void * iterdata;
f3548bdc 440 PAD *oldcomppad;
7766f137 441#else
022eaa24 442 OP * next_op;
79072805 443 SV ** itervar;
7766f137 444#endif
79072805 445 SV * itersave;
0a498629
NC
446 /* (from inspection of source code) for a .. range of strings this is the
447 current string. */
5f05dabc 448 SV * iterlval;
0a498629
NC
449 /* (from inspection of source code) for a foreach loop this is the array
450 being iterated over. For a .. range of numbers it's the current value.
451 A check is often made on the SvTYPE of iterary to determine whether
452 we are iterating over an array or a range. (numbers or strings) */
79072805 453 AV * iterary;
89ea2908 454 IV iterix;
0a498629
NC
455 /* (from inspection of source code) for a .. range of numbers this is the
456 maximum value. */
89ea2908 457 IV itermax;
79072805 458};
0a498629
NC
459/* It might be possible to squeeze this structure further. As best I can tell
460 itermax and iterlval are never used at the same time, so it might be possible
461 to make them into a union. However, I'm not confident that there are enough
462 flag bits/NULLable pointers in this structure alone to encode which is
463 active. There is, however, U8 of space free in struct block, which could be
464 used. Right now it may not be worth squeezing this structure further, as it's
465 the largest part of struct block, and currently struct block is 64 bytes on
466 an ILP32 system, which will give good cache alignment.
467*/
79072805 468
7766f137
GS
469#ifdef USE_ITHREADS
470# define CxITERVAR(c) \
471 ((c)->blk_loop.iterdata \
472 ? (CxPADLOOP(cx) \
dd2155a4
DM
473 ? &CX_CURPAD_SV( (c)->blk_loop, \
474 INT2PTR(PADOFFSET, (c)->blk_loop.iterdata)) \
7766f137
GS
475 : &GvSV((GV*)(c)->blk_loop.iterdata)) \
476 : (SV**)NULL)
477# define CX_ITERDATA_SET(cx,idata) \
dd2155a4 478 CX_CURPAD_SAVE(cx->blk_loop); \
155aba94 479 if ((cx->blk_loop.iterdata = (idata))) \
d10edb75
KC
480 cx->blk_loop.itersave = SvREFCNT_inc(*CxITERVAR(cx)); \
481 else \
a0714e2c 482 cx->blk_loop.itersave = NULL;
7766f137
GS
483#else
484# define CxITERVAR(c) ((c)->blk_loop.itervar)
485# define CX_ITERDATA_SET(cx,ivar) \
155aba94 486 if ((cx->blk_loop.itervar = (SV**)(ivar))) \
d10edb75
KC
487 cx->blk_loop.itersave = SvREFCNT_inc(*CxITERVAR(cx)); \
488 else \
a0714e2c 489 cx->blk_loop.itersave = NULL;
7766f137 490#endif
a61a7064 491#define CxLABEL(c) (0 + (c)->blk_oldcop->cop_label)
ae423868 492#define CxHASARGS(c) (((c)->cx_type & CXp_HASARGS) == CXp_HASARGS)
446d0787 493#define CxLVAL(c) (0 + (c)->blk_u16)
7766f137 494
022eaa24
NC
495#ifdef USE_ITHREADS
496# define PUSHLOOP_OP_NEXT /* No need to do anything. */
497# define CX_LOOP_NEXTOP_GET(cx) ((cx)->blk_loop.my_op->op_nextop + 0)
498#else
499# define PUSHLOOP_OP_NEXT cx->blk_loop.next_op = cLOOP->op_nextop
500# define CX_LOOP_NEXTOP_GET(cx) ((cx)->blk_loop.next_op + 0)
501#endif
502
3b719c58
NC
503#define PUSHLOOP_PLAIN(cx, s) \
504 cx->blk_loop.resetsp = s - PL_stack_base; \
505 cx->blk_loop.my_op = cLOOP; \
506 PUSHLOOP_OP_NEXT; \
507 cx->blk_loop.iterlval = NULL; \
508 cx->blk_loop.iterary = NULL; \
509 CX_ITERDATA_SET(cx,NULL);
510
511#define PUSHLOOP_FOR(cx, dat, s) \
38a230cb 512 cx->blk_loop.resetsp = s - PL_stack_base; \
022eaa24
NC
513 cx->blk_loop.my_op = cLOOP; \
514 PUSHLOOP_OP_NEXT; \
a0714e2c 515 cx->blk_loop.iterlval = NULL; \
7d49f689 516 cx->blk_loop.iterary = NULL; \
7766f137
GS
517 cx->blk_loop.iterix = -1; \
518 CX_ITERDATA_SET(cx,dat);
79072805
LW
519
520#define POPLOOP(cx) \
a8bba7fa 521 SvREFCNT_dec(cx->blk_loop.iterlval); \
7766f137 522 if (CxITERVAR(cx)) { \
21401c75 523 if (SvPADMY(cx->blk_loop.itersave)) { \
d4c19fe8 524 SV ** const s_v_p = CxITERVAR(cx); \
21401c75
CH
525 sv_2mortal(*s_v_p); \
526 *s_v_p = cx->blk_loop.itersave; \
527 } \
528 else { \
529 SvREFCNT_dec(cx->blk_loop.itersave); \
530 } \
44a8e56a 531 } \
a8bba7fa
GS
532 if (cx->blk_loop.iterary && cx->blk_loop.iterary != PL_curstack)\
533 SvREFCNT_dec(cx->blk_loop.iterary);
79072805 534
0d863452
RH
535/* given/when context */
536struct block_givwhen {
537 OP *leave_op;
538};
539
540#define PUSHGIVEN(cx) \
541 cx->blk_givwhen.leave_op = cLOGOP->op_other;
542
543#define PUSHWHEN PUSHGIVEN
544
79072805
LW
545/* context common to subroutines, evals and loops */
546struct block {
446d0787 547 U8 blku_type; /* what kind of context this is */
2e0df0e8 548 U8 blku_gimme; /* is this block running in list context? */
17347a51 549 U16 blku_u16; /* used by block_sub and block_eval (so far) */
79072805
LW
550 I32 blku_oldsp; /* stack pointer to copy stuff down to */
551 COP * blku_oldcop; /* old curcop pointer */
79072805
LW
552 I32 blku_oldmarksp; /* mark stack index */
553 I32 blku_oldscopesp; /* scope stack index */
554 PMOP * blku_oldpm; /* values of pattern match vars */
79072805
LW
555
556 union {
557 struct block_sub blku_sub;
f9c764c5 558 struct block_format blku_format;
79072805
LW
559 struct block_eval blku_eval;
560 struct block_loop blku_loop;
0d863452 561 struct block_givwhen blku_givwhen;
79072805
LW
562 } blk_u;
563};
564#define blk_oldsp cx_u.cx_blk.blku_oldsp
565#define blk_oldcop cx_u.cx_blk.blku_oldcop
79072805
LW
566#define blk_oldmarksp cx_u.cx_blk.blku_oldmarksp
567#define blk_oldscopesp cx_u.cx_blk.blku_oldscopesp
568#define blk_oldpm cx_u.cx_blk.blku_oldpm
569#define blk_gimme cx_u.cx_blk.blku_gimme
446d0787 570#define blk_u16 cx_u.cx_blk.blku_u16
79072805 571#define blk_sub cx_u.cx_blk.blk_u.blku_sub
f9c764c5 572#define blk_format cx_u.cx_blk.blk_u.blku_format
79072805
LW
573#define blk_eval cx_u.cx_blk.blk_u.blku_eval
574#define blk_loop cx_u.cx_blk.blk_u.blku_loop
0d863452 575#define blk_givwhen cx_u.cx_blk.blk_u.blku_givwhen
79072805
LW
576
577/* Enter a block. */
8990e307 578#define PUSHBLOCK(cx,t,sp) CXINC, cx = &cxstack[cxstack_ix], \
79072805 579 cx->cx_type = t, \
3280af22
NIS
580 cx->blk_oldsp = sp - PL_stack_base, \
581 cx->blk_oldcop = PL_curcop, \
1aff0e91 582 cx->blk_oldmarksp = PL_markstack_ptr - PL_markstack, \
3280af22 583 cx->blk_oldscopesp = PL_scopestack_ix, \
3280af22 584 cx->blk_oldpm = PL_curpm, \
eb160463 585 cx->blk_gimme = (U8)gimme; \
bf49b057 586 DEBUG_l( PerlIO_printf(Perl_debug_log, "Entering block %ld, type %s\n", \
1aff0e91 587 (long)cxstack_ix, PL_block_type[CxTYPE(cx)]); )
79072805
LW
588
589/* Exit a block (RETURN and LAST). */
a0d0e21e 590#define POPBLOCK(cx,pm) cx = &cxstack[cxstack_ix--], \
1aff0e91 591 newsp = PL_stack_base + cx->blk_oldsp, \
3280af22
NIS
592 PL_curcop = cx->blk_oldcop, \
593 PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \
594 PL_scopestack_ix = cx->blk_oldscopesp, \
3280af22
NIS
595 pm = cx->blk_oldpm, \
596 gimme = cx->blk_gimme; \
b4ab917c 597 DEBUG_SCOPE("POPBLOCK"); \
bf49b057 598 DEBUG_l( PerlIO_printf(Perl_debug_log, "Leaving block %ld, type %s\n", \
22c35a8c 599 (long)cxstack_ix+1,PL_block_type[CxTYPE(cx)]); )
79072805
LW
600
601/* Continue a block elsewhere (NEXT and REDO). */
3280af22 602#define TOPBLOCK(cx) cx = &cxstack[cxstack_ix], \
1aff0e91 603 PL_stack_sp = PL_stack_base + cx->blk_oldsp, \
3280af22
NIS
604 PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \
605 PL_scopestack_ix = cx->blk_oldscopesp, \
b4ab917c
DM
606 PL_curpm = cx->blk_oldpm; \
607 DEBUG_SCOPE("TOPBLOCK");
79072805
LW
608
609/* substitution context */
610struct subst {
446d0787 611 U8 sbu_type; /* what kind of context this is */
1ed74d04 612 U8 sbu_rflags;
446d0787 613 U16 sbu_rxtainted; /* matches struct block */
79072805
LW
614 I32 sbu_iters;
615 I32 sbu_maxiters;
4633a7c4 616 I32 sbu_oldsave;
79072805
LW
617 char * sbu_orig;
618 SV * sbu_dstr;
619 SV * sbu_targ;
620 char * sbu_s;
621 char * sbu_m;
622 char * sbu_strend;
c90c0ff4 623 void * sbu_rxres;
c07a80fd 624 REGEXP * sbu_rx;
79072805
LW
625};
626#define sb_iters cx_u.cx_subst.sbu_iters
627#define sb_maxiters cx_u.cx_subst.sbu_maxiters
22e551b9 628#define sb_rflags cx_u.cx_subst.sbu_rflags
4633a7c4 629#define sb_oldsave cx_u.cx_subst.sbu_oldsave
71be2cbc
PP
630#define sb_once cx_u.cx_subst.sbu_once
631#define sb_rxtainted cx_u.cx_subst.sbu_rxtainted
79072805
LW
632#define sb_orig cx_u.cx_subst.sbu_orig
633#define sb_dstr cx_u.cx_subst.sbu_dstr
634#define sb_targ cx_u.cx_subst.sbu_targ
635#define sb_s cx_u.cx_subst.sbu_s
636#define sb_m cx_u.cx_subst.sbu_m
637#define sb_strend cx_u.cx_subst.sbu_strend
c90c0ff4 638#define sb_rxres cx_u.cx_subst.sbu_rxres
c07a80fd 639#define sb_rx cx_u.cx_subst.sbu_rx
79072805
LW
640
641#define PUSHSUBST(cx) CXINC, cx = &cxstack[cxstack_ix], \
642 cx->sb_iters = iters, \
643 cx->sb_maxiters = maxiters, \
22e551b9 644 cx->sb_rflags = r_flags, \
4633a7c4 645 cx->sb_oldsave = oldsave, \
71be2cbc 646 cx->sb_rxtainted = rxtainted, \
79072805
LW
647 cx->sb_orig = orig, \
648 cx->sb_dstr = dstr, \
649 cx->sb_targ = targ, \
650 cx->sb_s = s, \
651 cx->sb_m = m, \
652 cx->sb_strend = strend, \
4608196e 653 cx->sb_rxres = NULL, \
c07a80fd 654 cx->sb_rx = rx, \
1ed74d04 655 cx->cx_type = CXt_SUBST | (once ? CXp_ONCE : 0); \
e22ae1e2 656 rxres_save(&cx->sb_rxres, rx); \
b69b0499 657 (void)ReREFCNT_inc(rx)
79072805 658
1ed74d04 659#define CxONCE(cx) ((cx)->cx_type & CXp_ONCE)
c5bed6a7 660
c90c0ff4 661#define POPSUBST(cx) cx = &cxstack[cxstack_ix--]; \
e22ae1e2
DM
662 rxres_free(&cx->sb_rxres); \
663 ReREFCNT_dec(cx->sb_rx)
79072805
LW
664
665struct context {
79072805
LW
666 union {
667 struct block cx_blk;
668 struct subst cx_subst;
669 } cx_u;
670};
2e0df0e8 671#define cx_type cx_u.cx_subst.sbu_type
6b35e009 672
3701055e 673#define CXTYPEMASK 0xf
79072805
LW
674#define CXt_NULL 0
675#define CXt_SUB 1
676#define CXt_EVAL 2
3b719c58 677#define CXt_WHEN 3
79072805
LW
678#define CXt_SUBST 4
679#define CXt_BLOCK 5
7766f137 680#define CXt_FORMAT 6
0d863452 681#define CXt_GIVEN 7
3b719c58
NC
682#define CXt_LOOP_PLAIN 8
683#define CXt_LOOP_FOR 9
684#define CXt_LOOP_RES1 10
685#define CXt_LOOP_RES2 11
79072805 686
3701055e
NC
687/* private flags for CXt_SUB and CXt_NULL
688 However, this is checked in many places which do not check the type, so
689 this bit needs to be kept clear for most everything else. For reasons I
690 haven't investigated, it can coexist with CXp_FOR_DEF */
1f27d788
NC
691#define CXp_MULTICALL 0x10 /* part of a multicall (so don't
692 tear down context on exit). */
9850bf21 693
ae423868 694/* private flags for CXt_SUB and CXt_FORMAT */
1f27d788 695#define CXp_HASARGS 0x20
ae423868 696
6b35e009 697/* private flags for CXt_EVAL */
1f27d788
NC
698#define CXp_REAL 0x20 /* truly eval'', not a lookalike */
699#define CXp_TRYBLOCK 0x40 /* eval{}, not eval'' or similar */
6b35e009 700
7766f137 701/* private flags for CXt_LOOP */
1f27d788 702#define CXp_FOR_DEF 0x10 /* foreach using $_ */
0d863452 703#ifdef USE_ITHREADS
3b719c58 704# define CXp_PADVAR 0x20 /* itervar lives on pad, iterdata has pad
1f27d788 705 offset; if not set, iterdata holds GV* */
3b719c58 706# define CxPADLOOP(c) (CxTYPE_is_LOOP(c) && ((c)->cx_type & (CXp_PADVAR)))
7766f137 707#endif
1ed74d04
NC
708/* private flags for CXt_SUBST */
709#define CXp_ONCE 0x10 /* What was sbu_once in struct subst */
7766f137 710
6b35e009 711#define CxTYPE(c) ((c)->cx_type & CXTYPEMASK)
3b719c58 712#define CxTYPE_is_LOOP(c) (((c)->cx_type & 0xC) == 0x8)
9850bf21
RH
713#define CxMULTICALL(c) (((c)->cx_type & CXp_MULTICALL) \
714 == CXp_MULTICALL)
0588a150 715#define CxREALEVAL(c) (((c)->cx_type & (CXTYPEMASK|CXp_REAL)) \
7766f137 716 == (CXt_EVAL|CXp_REAL))
0588a150 717#define CxTRYBLOCK(c) (((c)->cx_type & (CXTYPEMASK|CXp_TRYBLOCK)) \
1d76a5c3 718 == (CXt_EVAL|CXp_TRYBLOCK))
3b719c58
NC
719#define CxFOREACH(c) (CxTYPE_is_LOOP(c) && CxTYPE(c) != CXt_LOOP_PLAIN)
720#define CxFOREACHDEF(c) ((CxTYPE_is_LOOP(c) && CxTYPE(c) != CXt_LOOP_PLAIN) \
721 && ((c)->cx_type & CXp_FOR_DEF))
6b35e009 722
79072805
LW
723#define CXINC (cxstack_ix < cxstack_max ? ++cxstack_ix : (cxstack_ix = cxinc()))
724
ccfc67b7
JH
725/*
726=head1 "Gimme" Values
727*/
954c1994
GS
728
729/*
730=for apidoc AmU||G_SCALAR
731Used to indicate scalar context. See C<GIMME_V>, C<GIMME>, and
732L<perlcall>.
733
734=for apidoc AmU||G_ARRAY
91e74348 735Used to indicate list context. See C<GIMME_V>, C<GIMME> and
954c1994
GS
736L<perlcall>.
737
738=for apidoc AmU||G_VOID
739Used to indicate void context. See C<GIMME_V> and L<perlcall>.
740
741=for apidoc AmU||G_DISCARD
742Indicates that arguments returned from a callback should be discarded. See
743L<perlcall>.
744
745=for apidoc AmU||G_EVAL
746
747Used to force a Perl C<eval> wrapper around a callback. See
748L<perlcall>.
749
750=for apidoc AmU||G_NOARGS
751
752Indicates that no arguments are being sent to a callback. See
753L<perlcall>.
754
755=cut
756*/
757
2f8edad0
NC
758#define G_SCALAR 2
759#define G_ARRAY 3
760#define G_VOID 1
761#define G_WANT 3
79072805 762
864dbfa3 763/* extra flags for Perl_call_* routines */
2f8edad0 764#define G_DISCARD 4 /* Call FREETMPS.
b54b4831
NC
765 Don't change this without consulting the
766 hash actions codes defined in hv.h */
2f8edad0
NC
767#define G_EVAL 8 /* Assume eval {} around subroutine call. */
768#define G_NOARGS 16 /* Don't construct a @_ array. */
769#define G_KEEPERR 32 /* Append errors to $@, don't overwrite it */
770#define G_NODEBUG 64 /* Disable debugging at toplevel. */
771#define G_METHOD 128 /* Calling method. */
c40f1585 772#define G_FAKINGEVAL 256 /* Faking an eval context for call_sv or
edb2152a 773 fold_constants. */
e336de0d 774
faef0170
HS
775/* flag bits for PL_in_eval */
776#define EVAL_NULL 0 /* not in an eval */
777#define EVAL_INEVAL 1 /* some enclosing scope is an eval */
778#define EVAL_WARNONLY 2 /* used by yywarn() when calling yyerror() */
864dbfa3 779#define EVAL_KEEPERR 4 /* set by Perl_call_sv if G_KEEPERR */
6dc8a9e4 780#define EVAL_INREQUIRE 8 /* The code is being required. */
faef0170 781
e336de0d
GS
782/* Support for switching (stack and block) contexts.
783 * This ensures magic doesn't invalidate local stack and cx pointers.
784 */
785
e788e7d3
GS
786#define PERLSI_UNKNOWN -1
787#define PERLSI_UNDEF 0
788#define PERLSI_MAIN 1
789#define PERLSI_MAGIC 2
790#define PERLSI_SORT 3
791#define PERLSI_SIGNAL 4
792#define PERLSI_OVERLOAD 5
793#define PERLSI_DESTROY 6
794#define PERLSI_WARNHOOK 7
795#define PERLSI_DIEHOOK 8
796#define PERLSI_REQUIRE 9
e336de0d
GS
797
798struct stackinfo {
799 AV * si_stack; /* stack for current runlevel */
800 PERL_CONTEXT * si_cxstack; /* context stack for runlevel */
9bd87817
NC
801 struct stackinfo * si_prev;
802 struct stackinfo * si_next;
e336de0d
GS
803 I32 si_cxix; /* current context index */
804 I32 si_cxmax; /* maximum allocated index */
805 I32 si_type; /* type of runlevel */
ce2f7c3b 806 I32 si_markoff; /* offset where markstack begins for us.
e336de0d
GS
807 * currently used only with DEBUGGING,
808 * but not #ifdef-ed for bincompat */
809};
810
811typedef struct stackinfo PERL_SI;
812
3280af22
NIS
813#define cxstack (PL_curstackinfo->si_cxstack)
814#define cxstack_ix (PL_curstackinfo->si_cxix)
815#define cxstack_max (PL_curstackinfo->si_cxmax)
e336de0d
GS
816
817#ifdef DEBUGGING
ce2f7c3b
GS
818# define SET_MARK_OFFSET \
819 PL_curstackinfo->si_markoff = PL_markstack_ptr - PL_markstack
e336de0d 820#else
ce2f7c3b 821# define SET_MARK_OFFSET NOOP
e336de0d
GS
822#endif
823
d3acc0f7 824#define PUSHSTACKi(type) \
e336de0d 825 STMT_START { \
3280af22 826 PERL_SI *next = PL_curstackinfo->si_next; \
e336de0d
GS
827 if (!next) { \
828 next = new_stackinfo(32, 2048/sizeof(PERL_CONTEXT) - 1); \
3280af22
NIS
829 next->si_prev = PL_curstackinfo; \
830 PL_curstackinfo->si_next = next; \
e336de0d
GS
831 } \
832 next->si_type = type; \
833 next->si_cxix = -1; \
834 AvFILLp(next->si_stack) = 0; \
3280af22
NIS
835 SWITCHSTACK(PL_curstack,next->si_stack); \
836 PL_curstackinfo = next; \
ce2f7c3b 837 SET_MARK_OFFSET; \
e336de0d
GS
838 } STMT_END
839
e788e7d3 840#define PUSHSTACK PUSHSTACKi(PERLSI_UNKNOWN)
d3acc0f7 841
3095d977
GS
842/* POPSTACK works with PL_stack_sp, so it may need to be bracketed by
843 * PUTBACK/SPAGAIN to flush/refresh any local SP that may be active */
d3acc0f7 844#define POPSTACK \
e336de0d 845 STMT_START { \
39644a26 846 dSP; \
c4420975 847 PERL_SI * const prev = PL_curstackinfo->si_prev; \
e336de0d 848 if (!prev) { \
bf49b057 849 PerlIO_printf(Perl_error_log, "panic: POPSTACK\n"); \
e336de0d
GS
850 my_exit(1); \
851 } \
3280af22 852 SWITCHSTACK(PL_curstack,prev->si_stack); \
e336de0d 853 /* don't free prev here, free them all at the END{} */ \
3280af22 854 PL_curstackinfo = prev; \
e336de0d
GS
855 } STMT_END
856
857#define POPSTACK_TO(s) \
858 STMT_START { \
3280af22 859 while (PL_curstack != s) { \
bac4b2ad 860 dounwind(-1); \
d3acc0f7 861 POPSTACK; \
bac4b2ad 862 } \
e336de0d 863 } STMT_END
923e4eb5
JH
864
865#define IN_PERL_COMPILETIME (PL_curcop == &PL_compiling)
866#define IN_PERL_RUNTIME (PL_curcop != &PL_compiling)
867
9850bf21
RH
868/*
869=head1 Multicall Functions
870
871=for apidoc Ams||dMULTICALL
872Declare local variables for a multicall. See L<perlcall/Lightweight Callbacks>.
873
874=for apidoc Ams||PUSH_MULTICALL
875Opening bracket for a lightweight callback.
876See L<perlcall/Lightweight Callbacks>.
877
878=for apidoc Ams||MULTICALL
879Make a lightweight callback. See L<perlcall/Lightweight Callbacks>.
880
881=for apidoc Ams||POP_MULTICALL
882Closing bracket for a lightweight callback.
883See L<perlcall/Lightweight Callbacks>.
884
885=cut
886*/
887
888#define dMULTICALL \
889 SV **newsp; /* set by POPBLOCK */ \
890 PERL_CONTEXT *cx; \
82f35e8b 891 CV *multicall_cv; \
9850bf21
RH
892 OP *multicall_cop; \
893 bool multicall_oldcatch; \
894 U8 hasargs = 0 /* used by PUSHSUB */
895
82f35e8b 896#define PUSH_MULTICALL(the_cv) \
9850bf21 897 STMT_START { \
0bcc34c2
AL
898 CV * const _nOnclAshIngNamE_ = the_cv; \
899 CV * const cv = _nOnclAshIngNamE_; \
900 AV * const padlist = CvPADLIST(cv); \
9850bf21
RH
901 ENTER; \
902 multicall_oldcatch = CATCH_GET; \
903 SAVETMPS; SAVEVPTR(PL_op); \
904 CATCH_SET(TRUE); \
905 PUSHBLOCK(cx, CXt_SUB|CXp_MULTICALL, PL_stack_sp); \
906 PUSHSUB(cx); \
907 if (++CvDEPTH(cv) >= 2) { \
908 PERL_STACK_OVERFLOW_CHECK(); \
909 Perl_pad_push(aTHX_ padlist, CvDEPTH(cv)); \
910 } \
911 SAVECOMPPAD(); \
912 PAD_SET_CUR_NOSAVE(padlist, CvDEPTH(cv)); \
82f35e8b 913 multicall_cv = cv; \
9850bf21
RH
914 multicall_cop = CvSTART(cv); \
915 } STMT_END
916
917#define MULTICALL \
918 STMT_START { \
919 PL_op = multicall_cop; \
920 CALLRUNOPS(aTHX); \
921 } STMT_END
922
923#define POP_MULTICALL \
924 STMT_START { \
82f35e8b
RH
925 LEAVESUB(multicall_cv); \
926 CvDEPTH(multicall_cv)--; \
9850bf21
RH
927 POPBLOCK(cx,PL_curpm); \
928 CATCH_SET(multicall_oldcatch); \
929 LEAVE; \
930 } STMT_END
b3ca2e83
NC
931
932/*
933 * Local variables:
934 * c-indentation-style: bsd
935 * c-basic-offset: 4
936 * indent-tabs-mode: t
937 * End:
938 *
939 * ex: set ts=8 sts=4 sw=4 noet:
940 */