Commit | Line | Data |
---|---|---|
08aa1457 | 1 | /* |
2 | * This file was produced by running the config_h.SH script, which | |
3 | * gets its values from config.sh, which is generally produced by | |
4 | * running Configure. | |
5 | * | |
6 | * Feel free to modify any of this as the need arises. Note, however, | |
7 | * that running config_h.SH again will wipe out any changes you've made. | |
8 | * For a more permanent change edit config.sh and rerun config_h.SH. | |
9 | * | |
10 | * $Id: Config_h.U,v 3.0.1.4 1995/09/25 09:10:49 ram Exp $ | |
11 | */ | |
12 | ||
13 | /* Configuration time: Thu Apr 11 06:20:49 PDT 1996 | |
14 | * Configured by: garyng | |
15 | * Target system: | |
16 | */ | |
17 | ||
18 | #ifndef _config_h_ | |
19 | #define _config_h_ | |
20 | ||
21 | /* MEM_ALIGNBYTES: | |
22 | * This symbol contains the number of bytes required to align a | |
23 | * double. Usual values are 2, 4 and 8. | |
24 | * On NeXT starting with 3.2, you can build "Fat" Multiple Architecture | |
25 | * Binaries (MAB) for targets with varying alignment. This only matters | |
26 | * for perl, where the config.h can be generated and installed on one | |
27 | * system, and used by a different architecture to build an extension. | |
28 | * The default is eight, for safety. | |
29 | */ | |
30 | #ifndef NeXT | |
31 | #define MEM_ALIGNBYTES 8 /**/ | |
32 | #else /* NeXT */ | |
33 | #ifdef __m68k__ | |
34 | #define MEM_ALIGNBYTES 2 | |
35 | #else | |
36 | #ifdef __i386__ | |
37 | #define MEM_ALIGNBYTES 4 | |
38 | #else /* __hppa__, __sparc__ and default for unknown architectures */ | |
39 | #define MEM_ALIGNBYTES 8 | |
40 | #endif /* __i386__ */ | |
41 | #endif /* __m68k__ */ | |
42 | #endif /* NeXT */ | |
43 | ||
44 | /* ARCHNAME: | |
45 | * This symbol holds a string representing the architecture name. | |
46 | * It may be used to construct an architecture-dependant pathname | |
47 | * where library files may be held under a private library, for | |
48 | * instance. | |
49 | */ | |
35947295 TB |
50 | #ifdef _ALPHA_ |
51 | #define ARCHNAME "alpha-mswin32" /**/ | |
52 | #else | |
53 | #define ARCHNAME "x86-mswin32" /**/ | |
54 | #endif | |
08aa1457 | 55 | |
56 | /* BIN: | |
57 | * This symbol holds the path of the bin directory where the package will | |
58 | * be installed. Program must be prepared to deal with ~name substitution. | |
59 | */ | |
60 | /* BIN_EXP: | |
61 | * This symbol is the filename expanded version of the BIN symbol, for | |
62 | * programs that do not want to deal with that at run-time. | |
63 | */ | |
64 | #define BIN "c:\\perl\\bin" /**/ | |
65 | #define BIN_EXP "c:\\perl\\bin" /**/ | |
66 | ||
67 | /* CAT2: | |
68 | * This macro catenates 2 tokens together. | |
69 | */ | |
70 | /* STRINGIFY: | |
71 | * This macro surrounds its token with double quotes. | |
72 | */ | |
73 | #if 42 == 1 | |
74 | #define CAT2(a,b)a/**/b | |
75 | #define CAT3(a,b,c)a/**/b/**/c | |
76 | #define CAT4(a,b,c,d)a/**/b/**/c/**/d | |
77 | #define CAT5(a,b,c,d,e)a/**/b/**/c/**/d/**/e | |
78 | #define STRINGIFY(a)"a" | |
79 | /* If you can get stringification with catify, tell me how! */ | |
80 | #endif | |
81 | #if 42 == 42 | |
82 | #define CAT2(a,b)a ## b | |
83 | #define CAT3(a,b,c)a ## b ## c | |
84 | #define CAT4(a,b,c,d)a ## b ## c ## d | |
85 | #define CAT5(a,b,c,d,e)a ## b ## c ## d ## e | |
86 | #define StGiFy(a)# a | |
87 | #define STRINGIFY(a)StGiFy(a) | |
88 | #define SCAT2(a,b)StGiFy(a) StGiFy(b) | |
89 | #define SCAT3(a,b,c)StGiFy(a) StGiFy(b) StGiFy(c) | |
90 | #define SCAT4(a,b,c,d)StGiFy(a) StGiFy(b) StGiFy(c) StGiFy(d) | |
91 | #define SCAT5(a,b,c,d,e)StGiFy(a) StGiFy(b) StGiFy(c) StGiFy(d) StGiFy(e) | |
92 | #endif | |
93 | #ifndef CAT2 | |
94 | #include "Bletch: How does this C preprocessor catenate tokens?" | |
95 | #endif | |
96 | ||
97 | /* CPPSTDIN: | |
98 | * This symbol contains the first part of the string which will invoke | |
99 | * the C preprocessor on the standard input and produce to standard | |
100 | * output. Typical value of "cc -E" or "/lib/cpp", but it can also | |
101 | * call a wrapper. See CPPRUN. | |
102 | */ | |
103 | /* CPPMINUS: | |
104 | * This symbol contains the second part of the string which will invoke | |
105 | * the C preprocessor on the standard input and produce to standard | |
106 | * output. This symbol will have the value "-" if CPPSTDIN needs a minus | |
107 | * to specify standard input, otherwise the value is "". | |
108 | */ | |
109 | #define CPPSTDIN "cl -E" | |
110 | #define CPPMINUS "" | |
111 | ||
112 | /* HAS_ALARM: | |
113 | * This symbol, if defined, indicates that the alarm routine is | |
114 | * available. | |
115 | */ | |
116 | /*#define HAS_ALARM /**/ | |
117 | ||
118 | /* HASATTRIBUTE: | |
119 | * This symbol indicates the C compiler can check for function attributes, | |
120 | * such as printf formats. This is normally only supported by GNU cc. | |
121 | */ | |
122 | /*#define HASATTRIBUTE /**/ | |
123 | #ifndef HASATTRIBUTE | |
124 | #define __attribute__(_arg_) | |
125 | #endif | |
126 | ||
127 | /* HAS_BCMP: | |
128 | * This symbol is defined if the bcmp() routine is available to | |
129 | * compare blocks of memory. | |
130 | */ | |
131 | /*#define HAS_BCMP /**/ | |
132 | ||
133 | /* HAS_BCOPY: | |
134 | * This symbol is defined if the bcopy() routine is available to | |
135 | * copy blocks of memory. | |
136 | */ | |
137 | /*#define HAS_BCOPY /**/ | |
138 | ||
139 | /* HAS_BZERO: | |
140 | * This symbol is defined if the bzero() routine is available to | |
141 | * set a memory block to 0. | |
142 | */ | |
143 | /*#define HAS_BZERO /**/ | |
144 | ||
145 | /* CASTI32: | |
146 | * This symbol is defined if the C compiler can cast negative | |
147 | * or large floating point numbers to 32-bit ints. | |
148 | */ | |
149 | #define CASTI32 /**/ | |
150 | ||
151 | /* CASTNEGFLOAT: | |
152 | * This symbol is defined if the C compiler can cast negative | |
153 | * numbers to unsigned longs, ints and shorts. | |
154 | */ | |
155 | /* CASTFLAGS: | |
156 | * This symbol contains flags that say what difficulties the compiler | |
157 | * has casting odd floating values to unsigned long: | |
158 | * 0 = ok | |
159 | * 1 = couldn't cast < 0 | |
160 | * 2 = couldn't cast >= 0x80000000 | |
161 | * 4 = couldn't cast in argument expression list | |
162 | */ | |
163 | #define CASTNEGFLOAT /**/ | |
164 | #define CASTFLAGS 0 /**/ | |
165 | ||
166 | /* HAS_CHOWN: | |
167 | * This symbol, if defined, indicates that the chown routine is | |
168 | * available. | |
169 | */ | |
170 | /*#define HAS_CHOWN /**/ | |
171 | ||
172 | /* HAS_CHROOT: | |
173 | * This symbol, if defined, indicates that the chroot routine is | |
174 | * available. | |
175 | */ | |
176 | /*#define HAS_CHROOT /**/ | |
177 | ||
178 | /* HAS_CHSIZE: | |
179 | * This symbol, if defined, indicates that the chsize routine is available | |
180 | * to truncate files. You might need a -lx to get this routine. | |
181 | */ | |
182 | #define HAS_CHSIZE /**/ | |
183 | ||
184 | /* VOID_CLOSEDIR: | |
185 | * This symbol, if defined, indicates that the closedir() routine | |
186 | * does not return a value. | |
187 | */ | |
188 | /*#define VOID_CLOSEDIR /**/ | |
189 | ||
190 | /* HASCONST: | |
191 | * This symbol, if defined, indicates that this C compiler knows about | |
192 | * the const type. There is no need to actually test for that symbol | |
193 | * within your programs. The mere use of the "const" keyword will | |
194 | * trigger the necessary tests. | |
195 | */ | |
196 | #define HASCONST /**/ | |
197 | #ifndef HASCONST | |
198 | #define const | |
199 | #endif | |
200 | ||
201 | /* HAS_CRYPT: | |
202 | * This symbol, if defined, indicates that the crypt routine is available | |
203 | * to encrypt passwords and the like. | |
204 | */ | |
205 | /*#define HAS_CRYPT /**/ | |
206 | ||
207 | /* HAS_CUSERID: | |
208 | * This symbol, if defined, indicates that the cuserid routine is | |
209 | * available to get character login names. | |
210 | */ | |
211 | /*#define HAS_CUSERID /**/ | |
212 | ||
213 | /* HAS_DBL_DIG: | |
214 | * This symbol, if defined, indicates that this system's <float.h> | |
215 | * or <limits.h> defines the symbol DBL_DIG, which is the number | |
216 | * of significant digits in a double precision number. If this | |
217 | * symbol is not defined, a guess of 15 is usually pretty good. | |
218 | */ | |
219 | #define HAS_DBL_DIG /**/ | |
220 | ||
221 | /* HAS_DIFFTIME: | |
222 | * This symbol, if defined, indicates that the difftime routine is | |
223 | * available. | |
224 | */ | |
225 | #define HAS_DIFFTIME /**/ | |
226 | ||
227 | /* HAS_DLERROR: | |
228 | * This symbol, if defined, indicates that the dlerror routine is | |
229 | * available to return a string describing the last error that | |
230 | * occurred from a call to dlopen(), dlclose() or dlsym(). | |
231 | */ | |
232 | #define HAS_DLERROR /**/ | |
233 | ||
234 | /* HAS_DUP2: | |
235 | * This symbol, if defined, indicates that the dup2 routine is | |
236 | * available to duplicate file descriptors. | |
237 | */ | |
238 | #define HAS_DUP2 /**/ | |
239 | ||
240 | /* HAS_FCHMOD: | |
241 | * This symbol, if defined, indicates that the fchmod routine is available | |
242 | * to change mode of opened files. If unavailable, use chmod(). | |
243 | */ | |
244 | /*#define HAS_FCHMOD /**/ | |
245 | ||
246 | /* HAS_FCHOWN: | |
247 | * This symbol, if defined, indicates that the fchown routine is available | |
248 | * to change ownership of opened files. If unavailable, use chown(). | |
249 | */ | |
250 | /*#define HAS_FCHOWN /**/ | |
251 | ||
252 | /* HAS_FCNTL: | |
253 | * This symbol, if defined, indicates to the C program that | |
254 | * the fcntl() function exists. | |
255 | */ | |
256 | /*#define HAS_FCNTL /**/ | |
257 | ||
258 | /* HAS_FGETPOS: | |
259 | * This symbol, if defined, indicates that the fgetpos routine is | |
260 | * available to get the file position indicator, similar to ftell(). | |
261 | */ | |
262 | #define HAS_FGETPOS /**/ | |
263 | ||
264 | /* FLEXFILENAMES: | |
265 | * This symbol, if defined, indicates that the system supports filenames | |
266 | * longer than 14 characters. | |
267 | */ | |
268 | #define FLEXFILENAMES /**/ | |
269 | ||
270 | /* HAS_FLOCK: | |
271 | * This symbol, if defined, indicates that the flock routine is | |
272 | * available to do file locking. | |
273 | */ | |
274 | #define HAS_FLOCK /**/ | |
275 | ||
276 | /* HAS_FORK: | |
277 | * This symbol, if defined, indicates that the fork routine is | |
278 | * available. | |
279 | */ | |
280 | /*#define HAS_FORK /**/ | |
281 | ||
282 | /* HAS_FSETPOS: | |
283 | * This symbol, if defined, indicates that the fsetpos routine is | |
284 | * available to set the file position indicator, similar to fseek(). | |
285 | */ | |
286 | #define HAS_FSETPOS /**/ | |
287 | ||
288 | /* HAS_GETTIMEOFDAY: | |
289 | * This symbol, if defined, indicates that the gettimeofday() system | |
290 | * call is available for a sub-second accuracy clock. Usually, the file | |
291 | * <sys/resource.h> needs to be included (see I_SYS_RESOURCE). | |
292 | * The type "Timeval" should be used to refer to "struct timeval". | |
293 | */ | |
294 | /*#define HAS_GETTIMEOFDAY /**/ | |
295 | #ifdef HAS_GETTIMEOFDAY | |
296 | #define Timeval struct timeval /* Structure used by gettimeofday() */ | |
297 | #endif | |
298 | ||
299 | /* HAS_GETGROUPS: | |
300 | * This symbol, if defined, indicates that the getgroups() routine is | |
301 | * available to get the list of process groups. If unavailable, multiple | |
302 | * groups are probably not supported. | |
303 | */ | |
304 | /* HAS_SETGROUPS: | |
305 | * This symbol, if defined, indicates that the setgroups() routine is | |
306 | * available to set the list of process groups. If unavailable, multiple | |
307 | * groups are probably not supported. | |
308 | */ | |
309 | /*#define HAS_GETGROUPS /**/ | |
310 | /*#define HAS_SETGROUPS /**/ | |
311 | ||
312 | /* HAS_GETHOSTENT: | |
313 | * This symbol, if defined, indicates that the gethostent routine is | |
314 | * available to lookup host names in some data base or other. | |
315 | */ | |
316 | /*#define HAS_GETHOSTENT /**/ | |
317 | ||
318 | /* HAS_UNAME: | |
319 | * This symbol, if defined, indicates that the C program may use the | |
320 | * uname() routine to derive the host name. See also HAS_GETHOSTNAME | |
321 | * and PHOSTNAME. | |
322 | */ | |
323 | /*#define HAS_UNAME /**/ | |
324 | ||
325 | /* HAS_GETLOGIN: | |
326 | * This symbol, if defined, indicates that the getlogin routine is | |
327 | * available to get the login name. | |
328 | */ | |
329 | /*#define HAS_GETLOGIN /**/ | |
330 | ||
331 | /* HAS_GETPGRP2: | |
332 | * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) | |
333 | * routine is available to get the current process group. | |
334 | */ | |
335 | /*#define HAS_GETPGRP2 /**/ | |
336 | ||
337 | /* HAS_GETPPID: | |
338 | * This symbol, if defined, indicates that the getppid routine is | |
339 | * available to get the parent process ID. | |
340 | */ | |
341 | /*#define HAS_GETPPID /**/ | |
342 | ||
343 | /* HAS_GETPRIORITY: | |
344 | * This symbol, if defined, indicates that the getpriority routine is | |
345 | * available to get a process's priority. | |
346 | */ | |
347 | /*#define HAS_GETPRIORITY /**/ | |
348 | ||
349 | /* HAS_HTONL: | |
350 | * This symbol, if defined, indicates that the htonl() routine (and | |
351 | * friends htons() ntohl() ntohs()) are available to do network | |
352 | * order byte swapping. | |
353 | */ | |
354 | /* HAS_HTONS: | |
355 | * This symbol, if defined, indicates that the htons() routine (and | |
356 | * friends htonl() ntohl() ntohs()) are available to do network | |
357 | * order byte swapping. | |
358 | */ | |
359 | /* HAS_NTOHL: | |
360 | * This symbol, if defined, indicates that the ntohl() routine (and | |
361 | * friends htonl() htons() ntohs()) are available to do network | |
362 | * order byte swapping. | |
363 | */ | |
364 | /* HAS_NTOHS: | |
365 | * This symbol, if defined, indicates that the ntohs() routine (and | |
366 | * friends htonl() htons() ntohl()) are available to do network | |
367 | * order byte swapping. | |
368 | */ | |
369 | #define HAS_HTONL /**/ | |
370 | #define HAS_HTONS /**/ | |
371 | #define HAS_NTOHL /**/ | |
372 | #define HAS_NTOHS /**/ | |
373 | ||
374 | /* HAS_ISASCII: | |
375 | * This manifest constant lets the C program know that isascii | |
376 | * is available. | |
377 | */ | |
378 | #define HAS_ISASCII /**/ | |
379 | ||
380 | /* HAS_KILLPG: | |
381 | * This symbol, if defined, indicates that the killpg routine is available | |
382 | * to kill process groups. If unavailable, you probably should use kill | |
383 | * with a negative process number. | |
384 | */ | |
385 | /*#define HAS_KILLPG /**/ | |
386 | ||
387 | /* HAS_LINK: | |
388 | * This symbol, if defined, indicates that the link routine is | |
389 | * available to create hard links. | |
390 | */ | |
391 | /*#define HAS_LINK /**/ | |
392 | ||
393 | /* HAS_LOCALECONV: | |
394 | * This symbol, if defined, indicates that the localeconv routine is | |
395 | * available for numeric and monetary formatting conventions. | |
396 | */ | |
397 | #define HAS_LOCALECONV /**/ | |
398 | ||
399 | /* HAS_LOCKF: | |
400 | * This symbol, if defined, indicates that the lockf routine is | |
401 | * available to do file locking. | |
402 | */ | |
403 | /*#define HAS_LOCKF /**/ | |
404 | ||
405 | /* HAS_LSTAT: | |
406 | * This symbol, if defined, indicates that the lstat routine is | |
407 | * available to do file stats on symbolic links. | |
408 | */ | |
409 | /*#define HAS_LSTAT /**/ | |
410 | ||
411 | /* HAS_MBLEN: | |
412 | * This symbol, if defined, indicates that the mblen routine is available | |
413 | * to find the number of bytes in a multibye character. | |
414 | */ | |
415 | #define HAS_MBLEN /**/ | |
416 | ||
417 | /* HAS_MBSTOWCS: | |
418 | * This symbol, if defined, indicates that the mbstowcs routine is | |
419 | * available to covert a multibyte string into a wide character string. | |
420 | */ | |
421 | #define HAS_MBSTOWCS /**/ | |
422 | ||
423 | /* HAS_MBTOWC: | |
424 | * This symbol, if defined, indicates that the mbtowc routine is available | |
425 | * to covert a multibyte to a wide character. | |
426 | */ | |
427 | #define HAS_MBTOWC /**/ | |
428 | ||
429 | /* HAS_MEMCMP: | |
430 | * This symbol, if defined, indicates that the memcmp routine is available | |
431 | * to compare blocks of memory. | |
432 | */ | |
433 | #define HAS_MEMCMP /**/ | |
434 | ||
435 | /* HAS_MEMCPY: | |
436 | * This symbol, if defined, indicates that the memcpy routine is available | |
437 | * to copy blocks of memory. | |
438 | */ | |
439 | #define HAS_MEMCPY /**/ | |
440 | ||
441 | /* HAS_MEMMOVE: | |
442 | * This symbol, if defined, indicates that the memmove routine is available | |
443 | * to copy potentially overlapping blocks of memory. This should be used | |
444 | * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your | |
445 | * own version. | |
446 | */ | |
447 | #define HAS_MEMMOVE /**/ | |
448 | ||
449 | /* HAS_MEMSET: | |
450 | * This symbol, if defined, indicates that the memset routine is available | |
451 | * to set blocks of memory. | |
452 | */ | |
453 | #define HAS_MEMSET /**/ | |
454 | ||
455 | /* HAS_MKDIR: | |
456 | * This symbol, if defined, indicates that the mkdir routine is available | |
457 | * to create directories. Otherwise you should fork off a new process to | |
458 | * exec /bin/mkdir. | |
459 | */ | |
460 | #define HAS_MKDIR /**/ | |
461 | ||
462 | /* HAS_MKFIFO: | |
463 | * This symbol, if defined, indicates that the mkfifo routine is | |
464 | * available to create FIFOs. Otherwise, mknod should be able to | |
465 | * do it for you. However, if mkfifo is there, mknod might require | |
466 | * super-user privileges which mkfifo will not. | |
467 | */ | |
468 | /*#define HAS_MKFIFO /**/ | |
469 | ||
470 | /* HAS_MKTIME: | |
471 | * This symbol, if defined, indicates that the mktime routine is | |
472 | * available. | |
473 | */ | |
474 | #define HAS_MKTIME /**/ | |
475 | ||
476 | /* HAS_MSG: | |
477 | * This symbol, if defined, indicates that the entire msg*(2) library is | |
478 | * supported (IPC mechanism based on message queues). | |
479 | */ | |
480 | /*#define HAS_MSG /**/ | |
481 | ||
482 | /* HAS_NICE: | |
483 | * This symbol, if defined, indicates that the nice routine is | |
484 | * available. | |
485 | */ | |
486 | /*#define HAS_NICE /**/ | |
487 | ||
488 | /* HAS_OPEN3: | |
489 | * This manifest constant lets the C program know that the three | |
490 | * argument form of open(2) is available. | |
491 | */ | |
492 | /*#define HAS_OPEN3 /**/ | |
493 | ||
494 | /* HAS_PATHCONF: | |
495 | * This symbol, if defined, indicates that pathconf() is available | |
496 | * to determine file-system related limits and options associated | |
497 | * with a given filename. | |
498 | */ | |
499 | /* HAS_FPATHCONF: | |
500 | * This symbol, if defined, indicates that pathconf() is available | |
501 | * to determine file-system related limits and options associated | |
502 | * with a given open file descriptor. | |
503 | */ | |
504 | /*#define HAS_PATHCONF /**/ | |
505 | /*#define HAS_FPATHCONF /**/ | |
506 | ||
507 | /* HAS_PAUSE: | |
508 | * This symbol, if defined, indicates that the pause routine is | |
509 | * available to suspend a process until a signal is received. | |
510 | */ | |
511 | #define HAS_PAUSE /**/ | |
512 | ||
513 | /* HAS_PIPE: | |
514 | * This symbol, if defined, indicates that the pipe routine is | |
515 | * available to create an inter-process channel. | |
516 | */ | |
517 | #define HAS_PIPE /**/ | |
518 | ||
519 | /* HAS_POLL: | |
520 | * This symbol, if defined, indicates that the poll routine is | |
521 | * available to poll active file descriptors. | |
522 | */ | |
523 | /*#define HAS_POLL /**/ | |
524 | ||
525 | /* HAS_READDIR: | |
526 | * This symbol, if defined, indicates that the readdir routine is | |
527 | * available to read directory entries. You may have to include | |
528 | * <dirent.h>. See I_DIRENT. | |
529 | */ | |
530 | #define HAS_READDIR /**/ | |
531 | ||
532 | /* HAS_SEEKDIR: | |
533 | * This symbol, if defined, indicates that the seekdir routine is | |
534 | * available. You may have to include <dirent.h>. See I_DIRENT. | |
535 | */ | |
536 | #define HAS_SEEKDIR /**/ | |
537 | ||
538 | /* HAS_TELLDIR: | |
539 | * This symbol, if defined, indicates that the telldir routine is | |
540 | * available. You may have to include <dirent.h>. See I_DIRENT. | |
541 | */ | |
542 | #define HAS_TELLDIR /**/ | |
543 | ||
544 | /* HAS_REWINDDIR: | |
545 | * This symbol, if defined, indicates that the rewinddir routine is | |
546 | * available. You may have to include <dirent.h>. See I_DIRENT. | |
547 | */ | |
548 | #define HAS_REWINDDIR /**/ | |
549 | ||
550 | /* HAS_READLINK: | |
551 | * This symbol, if defined, indicates that the readlink routine is | |
552 | * available to read the value of a symbolic link. | |
553 | */ | |
554 | /*#define HAS_READLINK /**/ | |
555 | ||
556 | /* HAS_RENAME: | |
557 | * This symbol, if defined, indicates that the rename routine is available | |
558 | * to rename files. Otherwise you should do the unlink(), link(), unlink() | |
559 | * trick. | |
560 | */ | |
561 | #define HAS_RENAME /**/ | |
562 | ||
563 | /* HAS_RMDIR: | |
564 | * This symbol, if defined, indicates that the rmdir routine is | |
565 | * available to remove directories. Otherwise you should fork off a | |
566 | * new process to exec /bin/rmdir. | |
567 | */ | |
568 | #define HAS_RMDIR /**/ | |
569 | ||
570 | /* HAS_SAFE_BCOPY: | |
571 | * This symbol, if defined, indicates that the bcopy routine is available | |
572 | * to copy potentially overlapping memory blocks. Otherwise you should | |
573 | * probably use memmove() or memcpy(). If neither is defined, roll your | |
574 | * own version. | |
575 | */ | |
576 | /*#define HAS_SAFE_BCOPY /**/ | |
577 | ||
578 | /* HAS_SAFE_MEMCPY: | |
579 | * This symbol, if defined, indicates that the memcpy routine is available | |
580 | * to copy potentially overlapping memory blocks. Otherwise you should | |
581 | * probably use memmove() or memcpy(). If neither is defined, roll your | |
582 | * own version. | |
583 | */ | |
584 | /*#define HAS_SAFE_MEMCPY /**/ | |
585 | ||
586 | /* HAS_SANE_MEMCMP: | |
587 | * This symbol, if defined, indicates that the memcmp routine is available | |
588 | * and can be used to compare relative magnitudes of chars with their high | |
589 | * bits set. If it is not defined, roll your own version. | |
590 | */ | |
591 | #define HAS_SANE_MEMCMP /**/ | |
592 | ||
593 | /* HAS_SELECT: | |
594 | * This symbol, if defined, indicates that the select routine is | |
595 | * available to select active file descriptors. If the timeout field | |
596 | * is used, <sys/time.h> may need to be included. | |
597 | */ | |
598 | #define HAS_SELECT /**/ | |
599 | ||
600 | /* HAS_SEM: | |
601 | * This symbol, if defined, indicates that the entire sem*(2) library is | |
602 | * supported. | |
603 | */ | |
604 | /*#define HAS_SEM /**/ | |
605 | ||
606 | /* HAS_SETEGID: | |
607 | * This symbol, if defined, indicates that the setegid routine is available | |
608 | * to change the effective gid of the current program. | |
609 | */ | |
610 | /*#define HAS_SETEGID /**/ | |
611 | ||
612 | /* HAS_SETEUID: | |
613 | * This symbol, if defined, indicates that the seteuid routine is available | |
614 | * to change the effective uid of the current program. | |
615 | */ | |
616 | /*#define HAS_SETEUID /**/ | |
617 | ||
618 | /* HAS_SETLINEBUF: | |
619 | * This symbol, if defined, indicates that the setlinebuf routine is | |
620 | * available to change stderr or stdout from block-buffered or unbuffered | |
621 | * to a line-buffered mode. | |
622 | */ | |
623 | /*#define HAS_SETLINEBUF /**/ | |
624 | ||
625 | /* HAS_SETLOCALE: | |
626 | * This symbol, if defined, indicates that the setlocale routine is | |
627 | * available to handle locale-specific ctype implementations. | |
628 | */ | |
629 | #define HAS_SETLOCALE /**/ | |
630 | ||
631 | /* HAS_SETPGRP2: | |
632 | * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) | |
633 | * routine is available to set the current process group. | |
634 | */ | |
635 | /*#define HAS_SETPGRP2 /**/ | |
636 | ||
637 | /* HAS_SETPRIORITY: | |
638 | * This symbol, if defined, indicates that the setpriority routine is | |
639 | * available to set a process's priority. | |
640 | */ | |
641 | /*#define HAS_SETPRIORITY /**/ | |
642 | ||
643 | /* HAS_SETREGID: | |
644 | * This symbol, if defined, indicates that the setregid routine is | |
645 | * available to change the real and effective gid of the current | |
646 | * process. | |
647 | */ | |
648 | /* HAS_SETRESGID: | |
649 | * This symbol, if defined, indicates that the setresgid routine is | |
650 | * available to change the real, effective and saved gid of the current | |
651 | * process. | |
652 | */ | |
653 | /*#define HAS_SETREGID /**/ | |
654 | /*#define HAS_SETRESGID /**/ | |
655 | ||
656 | /* HAS_SETREUID: | |
657 | * This symbol, if defined, indicates that the setreuid routine is | |
658 | * available to change the real and effective uid of the current | |
659 | * process. | |
660 | */ | |
661 | /* HAS_SETRESUID: | |
662 | * This symbol, if defined, indicates that the setresuid routine is | |
663 | * available to change the real, effective and saved uid of the current | |
664 | * process. | |
665 | */ | |
666 | /*#define HAS_SETREUID /**/ | |
667 | /*#define HAS_SETRESUID /**/ | |
668 | ||
669 | /* HAS_SETRGID: | |
670 | * This symbol, if defined, indicates that the setrgid routine is available | |
671 | * to change the real gid of the current program. | |
672 | */ | |
673 | /*#define HAS_SETRGID /**/ | |
674 | ||
675 | /* HAS_SETRUID: | |
676 | * This symbol, if defined, indicates that the setruid routine is available | |
677 | * to change the real uid of the current program. | |
678 | */ | |
679 | /*#define HAS_SETRUID /**/ | |
680 | ||
681 | /* HAS_SETSID: | |
682 | * This symbol, if defined, indicates that the setsid routine is | |
683 | * available to set the process group ID. | |
684 | */ | |
685 | /*#define HAS_SETSID /**/ | |
686 | ||
687 | /* HAS_SHM: | |
688 | * This symbol, if defined, indicates that the entire shm*(2) library is | |
689 | * supported. | |
690 | */ | |
691 | /*#define HAS_SHM /**/ | |
692 | ||
693 | /* Shmat_t: | |
694 | * This symbol holds the return type of the shmat() system call. | |
695 | * Usually set to 'void *' or 'char *'. | |
696 | */ | |
697 | /* HAS_SHMAT_PROTOTYPE: | |
698 | * This symbol, if defined, indicates that the sys/shm.h includes | |
699 | * a prototype for shmat(). Otherwise, it is up to the program to | |
700 | * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess, | |
701 | * but not always right so it should be emitted by the program only | |
702 | * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. | |
703 | */ | |
704 | #define Shmat_t void * /**/ | |
705 | /*#define HAS_SHMAT_PROTOTYPE /**/ | |
706 | ||
707 | /* HAS_SIGACTION: | |
708 | * This symbol, if defined, indicates that Vr4's sigaction() routine | |
709 | * is available. | |
710 | */ | |
711 | /*#define HAS_SIGACTION /**/ | |
712 | ||
713 | /* HAS_SOCKET: | |
714 | * This symbol, if defined, indicates that the BSD socket interface is | |
715 | * supported. | |
716 | */ | |
717 | /* HAS_SOCKETPAIR: | |
718 | * This symbol, if defined, indicates that the BSD socketpair() call is | |
719 | * supported. | |
720 | */ | |
721 | #define HAS_SOCKET /**/ | |
722 | /*#define HAS_SOCKETPAIR /**/ | |
723 | ||
724 | /* USE_STAT_BLOCKS: | |
725 | * This symbol is defined if this system has a stat structure declaring | |
726 | * st_blksize and st_blocks. | |
727 | */ | |
728 | /*#define USE_STAT_BLOCKS /**/ | |
729 | ||
730 | /* USE_STDIO_PTR: | |
731 | * This symbol is defined if the _ptr and _cnt fields (or similar) | |
732 | * of the stdio FILE structure can be used to access the stdio buffer | |
733 | * for a file handle. If this is defined, then the FILE_ptr(fp) | |
734 | * and FILE_cnt(fp) macros will also be defined and should be used | |
735 | * to access these fields. | |
736 | */ | |
737 | /* FILE_ptr: | |
738 | * This macro is used to access the _ptr field (or equivalent) of the | |
739 | * FILE structure pointed to by its argument. This macro will always be | |
740 | * defined if USE_STDIO_PTR is defined. | |
741 | */ | |
742 | /* STDIO_PTR_LVALUE: | |
743 | * This symbol is defined if the FILE_ptr macro can be used as an | |
744 | * lvalue. | |
745 | */ | |
746 | /* FILE_cnt: | |
747 | * This macro is used to access the _cnt field (or equivalent) of the | |
748 | * FILE structure pointed to by its argument. This macro will always be | |
749 | * defined if USE_STDIO_PTR is defined. | |
750 | */ | |
751 | /* STDIO_CNT_LVALUE: | |
752 | * This symbol is defined if the FILE_cnt macro can be used as an | |
753 | * lvalue. | |
754 | */ | |
755 | #define USE_STDIO_PTR /**/ | |
756 | #ifdef USE_STDIO_PTR | |
757 | #define FILE_ptr(fp) ((fp)->_ptr) | |
758 | #define STDIO_PTR_LVALUE /**/ | |
759 | #define FILE_cnt(fp) ((fp)->_cnt) | |
760 | #define STDIO_CNT_LVALUE /**/ | |
761 | #endif | |
762 | ||
763 | /* USE_STDIO_BASE: | |
764 | * This symbol is defined if the _base field (or similar) of the | |
765 | * stdio FILE structure can be used to access the stdio buffer for | |
766 | * a file handle. If this is defined, then the FILE_base(fp) macro | |
767 | * will also be defined and should be used to access this field. | |
768 | * Also, the FILE_bufsiz(fp) macro will be defined and should be used | |
769 | * to determine the number of bytes in the buffer. USE_STDIO_BASE | |
770 | * will never be defined unless USE_STDIO_PTR is. | |
771 | */ | |
772 | /* FILE_base: | |
773 | * This macro is used to access the _base field (or equivalent) of the | |
774 | * FILE structure pointed to by its argument. This macro will always be | |
775 | * defined if USE_STDIO_BASE is defined. | |
776 | */ | |
777 | /* FILE_bufsiz: | |
778 | * This macro is used to determine the number of bytes in the I/O | |
779 | * buffer pointed to by _base field (or equivalent) of the FILE | |
780 | * structure pointed to its argument. This macro will always be defined | |
781 | * if USE_STDIO_BASE is defined. | |
782 | */ | |
783 | #define USE_STDIO_BASE /**/ | |
784 | #ifdef USE_STDIO_BASE | |
785 | #define FILE_base(fp) ((fp)->_base) | |
786 | #define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base) | |
787 | #endif | |
788 | ||
789 | /* HAS_STRCHR: | |
790 | * This symbol is defined to indicate that the strchr()/strrchr() | |
791 | * functions are available for string searching. If not, try the | |
792 | * index()/rindex() pair. | |
793 | */ | |
794 | /* HAS_INDEX: | |
795 | * This symbol is defined to indicate that the index()/rindex() | |
796 | * functions are available for string searching. | |
797 | */ | |
798 | #define HAS_STRCHR /**/ | |
799 | /*#define HAS_INDEX /**/ | |
800 | ||
801 | /* HAS_STRCOLL: | |
802 | * This symbol, if defined, indicates that the strcoll routine is | |
803 | * available to compare strings using collating information. | |
804 | */ | |
805 | #define HAS_STRCOLL /**/ | |
806 | ||
807 | /* USE_STRUCT_COPY: | |
808 | * This symbol, if defined, indicates that this C compiler knows how | |
809 | * to copy structures. If undefined, you'll need to use a block copy | |
810 | * routine of some sort instead. | |
811 | */ | |
812 | #define USE_STRUCT_COPY /**/ | |
813 | ||
814 | /* HAS_STRERROR: | |
815 | * This symbol, if defined, indicates that the strerror routine is | |
816 | * available to translate error numbers to strings. See the writeup | |
817 | * of Strerror() in this file before you try to define your own. | |
818 | */ | |
819 | /* HAS_SYS_ERRLIST: | |
820 | * This symbol, if defined, indicates that the sys_errlist array is | |
821 | * available to translate error numbers to strings. The extern int | |
822 | * sys_nerr gives the size of that table. | |
823 | */ | |
824 | /* Strerror: | |
825 | * This preprocessor symbol is defined as a macro if strerror() is | |
826 | * not available to translate error numbers to strings but sys_errlist[] | |
827 | * array is there. | |
828 | */ | |
829 | #define HAS_STRERROR /**/ | |
830 | #define HAS_SYS_ERRLIST /**/ | |
831 | #define Strerror(e) strerror(e) | |
832 | ||
833 | /* HAS_STRTOD: | |
834 | * This symbol, if defined, indicates that the strtod routine is | |
835 | * available to provide better numeric string conversion than atof(). | |
836 | */ | |
837 | #define HAS_STRTOD /**/ | |
838 | ||
839 | /* HAS_STRTOL: | |
840 | * This symbol, if defined, indicates that the strtol routine is available | |
841 | * to provide better numeric string conversion than atoi() and friends. | |
842 | */ | |
843 | #define HAS_STRTOL /**/ | |
844 | ||
845 | /* HAS_STRTOUL: | |
846 | * This symbol, if defined, indicates that the strtoul routine is | |
847 | * available to provide conversion of strings to unsigned long. | |
848 | */ | |
849 | #define HAS_STRTOUL /**/ | |
850 | ||
851 | /* HAS_STRXFRM: | |
852 | * This symbol, if defined, indicates that the strxfrm() routine is | |
853 | * available to transform strings. | |
854 | */ | |
855 | #define HAS_STRXFRM /**/ | |
856 | ||
857 | /* HAS_SYMLINK: | |
858 | * This symbol, if defined, indicates that the symlink routine is available | |
859 | * to create symbolic links. | |
860 | */ | |
861 | /*#define HAS_SYMLINK /**/ | |
862 | ||
863 | /* HAS_SYSCALL: | |
864 | * This symbol, if defined, indicates that the syscall routine is | |
865 | * available to call arbitrary system calls. If undefined, that's tough. | |
866 | */ | |
867 | /*#define HAS_SYSCALL /**/ | |
868 | ||
869 | /* HAS_SYSCONF: | |
870 | * This symbol, if defined, indicates that sysconf() is available | |
871 | * to determine system related limits and options. | |
872 | */ | |
873 | /*#define HAS_SYSCONF /**/ | |
874 | ||
875 | /* HAS_SYSTEM: | |
876 | * This symbol, if defined, indicates that the system routine is | |
877 | * available to issue a shell command. | |
878 | */ | |
879 | #define HAS_SYSTEM /**/ | |
880 | ||
881 | /* HAS_TCGETPGRP: | |
882 | * This symbol, if defined, indicates that the tcgetpgrp routine is | |
883 | * available to get foreground process group ID. | |
884 | */ | |
885 | /*#define HAS_TCGETPGRP /**/ | |
886 | ||
887 | /* HAS_TCSETPGRP: | |
888 | * This symbol, if defined, indicates that the tcsetpgrp routine is | |
889 | * available to set foreground process group ID. | |
890 | */ | |
891 | /*#define HAS_TCSETPGRP /**/ | |
892 | ||
893 | /* Time_t: | |
894 | * This symbol holds the type returned by time(). It can be long, | |
895 | * or time_t on BSD sites (in which case <sys/types.h> should be | |
896 | * included). | |
897 | */ | |
898 | #define Time_t time_t /* Time type */ | |
899 | ||
900 | /* HAS_TIMES: | |
901 | * This symbol, if defined, indicates that the times() routine exists. | |
902 | * Note that this became obsolete on some systems (SUNOS), which now | |
903 | * use getrusage(). It may be necessary to include <sys/times.h>. | |
904 | */ | |
905 | #define HAS_TIMES /**/ | |
906 | ||
907 | /* HAS_TRUNCATE: | |
908 | * This symbol, if defined, indicates that the truncate routine is | |
909 | * available to truncate files. | |
910 | */ | |
911 | /*#define HAS_TRUNCATE /**/ | |
912 | ||
913 | /* HAS_TZNAME: | |
914 | * This symbol, if defined, indicates that the tzname[] array is | |
915 | * available to access timezone names. | |
916 | */ | |
917 | #define HAS_TZNAME /**/ | |
918 | ||
919 | /* HAS_UMASK: | |
920 | * This symbol, if defined, indicates that the umask routine is | |
921 | * available to set and get the value of the file creation mask. | |
922 | */ | |
923 | #define HAS_UMASK /**/ | |
924 | ||
925 | /* HAS_VFORK: | |
926 | * This symbol, if defined, indicates that vfork() exists. | |
927 | */ | |
928 | /*#define HAS_VFORK /**/ | |
929 | ||
930 | /* Signal_t: | |
931 | * This symbol's value is either "void" or "int", corresponding to the | |
932 | * appropriate return type of a signal handler. Thus, you can declare | |
933 | * a signal handler using "Signal_t (*handler)()", and define the | |
934 | * handler using "Signal_t handler(sig)". | |
935 | */ | |
936 | #define Signal_t void /* Signal handler's return type */ | |
937 | ||
938 | /* HASVOLATILE: | |
939 | * This symbol, if defined, indicates that this C compiler knows about | |
940 | * the volatile declaration. | |
941 | */ | |
942 | #define HASVOLATILE /**/ | |
943 | #ifndef HASVOLATILE | |
944 | #define volatile | |
945 | #endif | |
946 | ||
947 | /* HAS_VPRINTF: | |
948 | * This symbol, if defined, indicates that the vprintf routine is available | |
949 | * to printf with a pointer to an argument list. If unavailable, you | |
950 | * may need to write your own, probably in terms of _doprnt(). | |
951 | */ | |
952 | /* USE_CHAR_VSPRINTF: | |
953 | * This symbol is defined if this system has vsprintf() returning type | |
954 | * (char*). The trend seems to be to declare it as "int vsprintf()". It | |
955 | * is up to the package author to declare vsprintf correctly based on the | |
956 | * symbol. | |
957 | */ | |
958 | #define HAS_VPRINTF /**/ | |
959 | /*#define USE_CHAR_VSPRINTF /**/ | |
960 | ||
961 | /* HAS_WAIT4: | |
962 | * This symbol, if defined, indicates that wait4() exists. | |
963 | */ | |
964 | /*#define HAS_WAIT4 /**/ | |
965 | ||
966 | /* HAS_WAITPID: | |
967 | * This symbol, if defined, indicates that the waitpid routine is | |
968 | * available to wait for child process. | |
969 | */ | |
970 | /*#define HAS_WAITPID /**/ | |
971 | ||
972 | /* HAS_WCSTOMBS: | |
973 | * This symbol, if defined, indicates that the wcstombs routine is | |
974 | * available to convert wide character strings to multibyte strings. | |
975 | */ | |
976 | #define HAS_WCSTOMBS /**/ | |
977 | ||
978 | /* HAS_WCTOMB: | |
979 | * This symbol, if defined, indicates that the wctomb routine is available | |
980 | * to covert a wide character to a multibyte. | |
981 | */ | |
982 | #define HAS_WCTOMB /**/ | |
983 | ||
984 | /* Fpos_t: | |
985 | * This symbol holds the type used to declare file positions in libc. | |
986 | * It can be fpos_t, long, uint, etc... It may be necessary to include | |
987 | * <sys/types.h> to get any typedef'ed information. | |
988 | */ | |
989 | #define Fpos_t fpos_t /* File position type */ | |
990 | ||
991 | /* Gid_t: | |
992 | * This symbol holds the return type of getgid() and the type of | |
993 | * argument to setrgid() and related functions. Typically, | |
994 | * it is the type of group ids in the kernel. It can be int, ushort, | |
995 | * uid_t, etc... It may be necessary to include <sys/types.h> to get | |
996 | * any typedef'ed information. | |
997 | */ | |
998 | #define Gid_t gid_t /* Type for getgid(), etc... */ | |
999 | ||
1000 | /* Groups_t: | |
1001 | * This symbol holds the type used for the second argument to | |
1002 | * [gs]etgroups(). Usually, this is the same of gidtype, but | |
1003 | * sometimes it isn't. It can be int, ushort, uid_t, etc... | |
1004 | * It may be necessary to include <sys/types.h> to get any | |
1005 | * typedef'ed information. This is only required if you have | |
1006 | * getgroups() or setgroups(). | |
1007 | */ | |
1008 | #if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) | |
1009 | #define Groups_t gid_t /* Type for 2nd arg to [gs]etgroups() */ | |
1010 | #endif | |
1011 | ||
1012 | /* DB_Prefix_t: | |
1013 | * This symbol contains the type of the prefix structure element | |
1014 | * in the <db.h> header file. In older versions of DB, it was | |
1015 | * int, while in newer ones it is u_int32_t. | |
1016 | */ | |
1017 | /* DB_Hash_t: | |
1018 | * This symbol contains the type of the prefix structure element | |
1019 | * in the <db.h> header file. In older versions of DB, it was | |
1020 | * int, while in newer ones it is size_t. | |
1021 | */ | |
1022 | #define DB_Hash_t int /**/ | |
1023 | #define DB_Prefix_t int /**/ | |
1024 | ||
1025 | /* I_DIRENT: | |
1026 | * This symbol, if defined, indicates to the C program that it should | |
1027 | * include <dirent.h>. Using this symbol also triggers the definition | |
1028 | * of the Direntry_t define which ends up being 'struct dirent' or | |
1029 | * 'struct direct' depending on the availability of <dirent.h>. | |
1030 | */ | |
1031 | /* DIRNAMLEN: | |
1032 | * This symbol, if defined, indicates to the C program that the length | |
1033 | * of directory entry names is provided by a d_namlen field. Otherwise | |
1034 | * you need to do strlen() on the d_name field. | |
1035 | */ | |
1036 | /* Direntry_t: | |
1037 | * This symbol is set to 'struct direct' or 'struct dirent' depending on | |
1038 | * whether dirent is available or not. You should use this pseudo type to | |
1039 | * portably declare your directory entries. | |
1040 | */ | |
1041 | #define I_DIRENT /**/ | |
1042 | #define DIRNAMLEN /**/ | |
1043 | #define Direntry_t struct direct | |
1044 | ||
1045 | /* I_DLFCN: | |
1046 | * This symbol, if defined, indicates that <dlfcn.h> exists and should | |
1047 | * be included. | |
1048 | */ | |
1049 | #define I_DLFCN /**/ | |
1050 | ||
1051 | /* I_FCNTL: | |
1052 | * This manifest constant tells the C program to include <fcntl.h>. | |
1053 | */ | |
1054 | #define I_FCNTL /**/ | |
1055 | ||
1056 | /* I_FLOAT: | |
1057 | * This symbol, if defined, indicates to the C program that it should | |
1058 | * include <float.h> to get definition of symbols like DBL_MAX or | |
1059 | * DBL_MIN, i.e. machine dependent floating point values. | |
1060 | */ | |
1061 | #define I_FLOAT /**/ | |
1062 | ||
1063 | /* I_GRP: | |
1064 | * This symbol, if defined, indicates to the C program that it should | |
1065 | * include <grp.h>. | |
1066 | */ | |
1067 | #define I_GRP /**/ | |
1068 | ||
1069 | /* I_LIMITS: | |
1070 | * This symbol, if defined, indicates to the C program that it should | |
1071 | * include <limits.h> to get definition of symbols like WORD_BIT or | |
1072 | * LONG_MAX, i.e. machine dependant limitations. | |
1073 | */ | |
1074 | #define I_LIMITS /**/ | |
1075 | ||
1076 | /* I_MATH: | |
1077 | * This symbol, if defined, indicates to the C program that it should | |
1078 | * include <math.h>. | |
1079 | */ | |
1080 | #define I_MATH /**/ | |
1081 | ||
1082 | /* I_MEMORY: | |
1083 | * This symbol, if defined, indicates to the C program that it should | |
1084 | * include <memory.h>. | |
1085 | */ | |
1086 | /*#define I_MEMORY /**/ | |
1087 | ||
1088 | /* I_NDBM: | |
1089 | * This symbol, if defined, indicates that <ndbm.h> exists and should | |
1090 | * be included. | |
1091 | */ | |
1092 | /*#define I_NDBM /**/ | |
1093 | ||
1094 | /* I_NET_ERRNO: | |
1095 | * This symbol, if defined, indicates that <net/errno.h> exists and | |
1096 | * should be included. | |
1097 | */ | |
1098 | /*#define I_NET_ERRNO /**/ | |
1099 | ||
1100 | /* I_NETINET_IN: | |
1101 | * This symbol, if defined, indicates to the C program that it should | |
1102 | * include <netinet/in.h>. Otherwise, you may try <sys/in.h>. | |
1103 | */ | |
1104 | /*#define I_NETINET_IN /**/ | |
1105 | ||
1106 | /* I_PWD: | |
1107 | * This symbol, if defined, indicates to the C program that it should | |
1108 | * include <pwd.h>. | |
1109 | */ | |
1110 | /* PWQUOTA: | |
1111 | * This symbol, if defined, indicates to the C program that struct passwd | |
1112 | * contains pw_quota. | |
1113 | */ | |
1114 | /* PWAGE: | |
1115 | * This symbol, if defined, indicates to the C program that struct passwd | |
1116 | * contains pw_age. | |
1117 | */ | |
1118 | /* PWCHANGE: | |
1119 | * This symbol, if defined, indicates to the C program that struct passwd | |
1120 | * contains pw_change. | |
1121 | */ | |
1122 | /* PWCLASS: | |
1123 | * This symbol, if defined, indicates to the C program that struct passwd | |
1124 | * contains pw_class. | |
1125 | */ | |
1126 | /* PWEXPIRE: | |
1127 | * This symbol, if defined, indicates to the C program that struct passwd | |
1128 | * contains pw_expire. | |
1129 | */ | |
1130 | /* PWCOMMENT: | |
1131 | * This symbol, if defined, indicates to the C program that struct passwd | |
1132 | * contains pw_comment. | |
1133 | */ | |
1134 | /*#define I_PWD /**/ | |
1135 | /*#define PWQUOTA /**/ | |
1136 | /*#define PWAGE /**/ | |
1137 | /*#define PWCHANGE /**/ | |
1138 | /*#define PWCLASS /**/ | |
1139 | /*#define PWEXPIRE /**/ | |
1140 | /*#define PWCOMMENT /**/ | |
1141 | ||
1142 | /* I_STDDEF: | |
1143 | * This symbol, if defined, indicates that <stddef.h> exists and should | |
1144 | * be included. | |
1145 | */ | |
1146 | #define I_STDDEF /**/ | |
1147 | ||
1148 | /* I_STDLIB: | |
1149 | * This symbol, if defined, indicates that <stdlib.h> exists and should | |
1150 | * be included. | |
1151 | */ | |
1152 | #define I_STDLIB /**/ | |
1153 | ||
1154 | /* I_STRING: | |
1155 | * This symbol, if defined, indicates to the C program that it should | |
1156 | * include <string.h> (USG systems) instead of <strings.h> (BSD systems). | |
1157 | */ | |
1158 | #define I_STRING /**/ | |
1159 | ||
1160 | /* I_SYS_DIR: | |
1161 | * This symbol, if defined, indicates to the C program that it should | |
1162 | * include <sys/dir.h>. | |
1163 | */ | |
1164 | /*#define I_SYS_DIR /**/ | |
1165 | ||
1166 | /* I_SYS_FILE: | |
1167 | * This symbol, if defined, indicates to the C program that it should | |
1168 | * include <sys/file.h> to get definition of R_OK and friends. | |
1169 | */ | |
1170 | /*#define I_SYS_FILE /**/ | |
1171 | ||
1172 | /* I_SYS_IOCTL: | |
1173 | * This symbol, if defined, indicates that <sys/ioctl.h> exists and should | |
1174 | * be included. Otherwise, include <sgtty.h> or <termio.h>. | |
1175 | */ | |
1176 | /*#define I_SYS_IOCTL /**/ | |
1177 | ||
1178 | /* I_SYS_NDIR: | |
1179 | * This symbol, if defined, indicates to the C program that it should | |
1180 | * include <sys/ndir.h>. | |
1181 | */ | |
1182 | /*#define I_SYS_NDIR /**/ | |
1183 | ||
1184 | /* I_SYS_PARAM: | |
1185 | * This symbol, if defined, indicates to the C program that it should | |
1186 | * include <sys/param.h>. | |
1187 | */ | |
1188 | /*#define I_SYS_PARAM /**/ | |
1189 | ||
1190 | /* I_SYS_RESOURCE: | |
1191 | * This symbol, if defined, indicates to the C program that it should | |
1192 | * include <sys/resource.h>. | |
1193 | */ | |
1194 | /*#define I_SYS_RESOURCE /**/ | |
1195 | ||
1196 | /* I_SYS_SELECT: | |
1197 | * This symbol, if defined, indicates to the C program that it should | |
1198 | * include <sys/select.h> in order to get definition of struct timeval. | |
1199 | */ | |
1200 | /*#define I_SYS_SELECT /**/ | |
1201 | ||
1202 | /* I_SYS_TIMES: | |
1203 | * This symbol, if defined, indicates to the C program that it should | |
1204 | * include <sys/times.h>. | |
1205 | */ | |
1206 | /*#define I_SYS_TIMES /**/ | |
1207 | ||
1208 | /* I_SYS_TYPES: | |
1209 | * This symbol, if defined, indicates to the C program that it should | |
1210 | * include <sys/types.h>. | |
1211 | */ | |
1212 | #define I_SYS_TYPES /**/ | |
1213 | ||
1214 | /* I_SYS_UN: | |
1215 | * This symbol, if defined, indicates to the C program that it should | |
1216 | * include <sys/un.h> to get UNIX domain socket definitions. | |
1217 | */ | |
1218 | /*#define I_SYS_UN /**/ | |
1219 | ||
1220 | /* I_SYS_WAIT: | |
1221 | * This symbol, if defined, indicates to the C program that it should | |
1222 | * include <sys/wait.h>. | |
1223 | */ | |
1224 | /*#define I_SYS_WAIT /**/ | |
1225 | ||
1226 | /* I_TERMIO: | |
1227 | * This symbol, if defined, indicates that the program should include | |
1228 | * <termio.h> rather than <sgtty.h>. There are also differences in | |
1229 | * the ioctl() calls that depend on the value of this symbol. | |
1230 | */ | |
1231 | /* I_TERMIOS: | |
1232 | * This symbol, if defined, indicates that the program should include | |
1233 | * the POSIX termios.h rather than sgtty.h or termio.h. | |
1234 | * There are also differences in the ioctl() calls that depend on the | |
1235 | * value of this symbol. | |
1236 | */ | |
1237 | /* I_SGTTY: | |
1238 | * This symbol, if defined, indicates that the program should include | |
1239 | * <sgtty.h> rather than <termio.h>. There are also differences in | |
1240 | * the ioctl() calls that depend on the value of this symbol. | |
1241 | */ | |
1242 | /*#define I_TERMIO /**/ | |
1243 | /*#define I_TERMIOS /**/ | |
1244 | /*#define I_SGTTY /**/ | |
1245 | ||
1246 | /* I_TIME: | |
1247 | * This symbol, if defined, indicates to the C program that it should | |
1248 | * include <time.h>. | |
1249 | */ | |
1250 | /* I_SYS_TIME: | |
1251 | * This symbol, if defined, indicates to the C program that it should | |
1252 | * include <sys/time.h>. | |
1253 | */ | |
1254 | /* I_SYS_TIME_KERNEL: | |
1255 | * This symbol, if defined, indicates to the C program that it should | |
1256 | * include <sys/time.h> with KERNEL defined. | |
1257 | */ | |
1258 | #define I_TIME /**/ | |
1259 | /*#define I_SYS_TIME /**/ | |
1260 | /*#define I_SYS_TIME_KERNEL /**/ | |
1261 | ||
1262 | /* I_UNISTD: | |
1263 | * This symbol, if defined, indicates to the C program that it should | |
1264 | * include <unistd.h>. | |
1265 | */ | |
1266 | /*#define I_UNISTD /**/ | |
1267 | ||
1268 | /* I_UTIME: | |
1269 | * This symbol, if defined, indicates to the C program that it should | |
1270 | * include <utime.h>. | |
1271 | */ | |
1272 | #define I_UTIME /**/ | |
1273 | ||
1274 | /* I_STDARG: | |
1275 | * This symbol, if defined, indicates that <stdarg.h> exists and should | |
1276 | * be included. | |
1277 | */ | |
1278 | /* I_VARARGS: | |
1279 | * This symbol, if defined, indicates to the C program that it should | |
1280 | * include <varargs.h>. | |
1281 | */ | |
1282 | #define I_STDARG /**/ | |
1283 | /*#define I_VARARGS /**/ | |
1284 | ||
1285 | /* I_VFORK: | |
1286 | * This symbol, if defined, indicates to the C program that it should | |
1287 | * include vfork.h. | |
1288 | */ | |
1289 | /*#define I_VFORK /**/ | |
1290 | ||
1291 | /* INTSIZE: | |
1292 | * This symbol contains the value of sizeof(int) so that the C | |
1293 | * preprocessor can make decisions based on it. | |
1294 | */ | |
1295 | /* LONGSIZE: | |
1296 | * This symbol contains the value of sizeof(long) so that the C | |
1297 | * preprocessor can make decisions based on it. | |
1298 | */ | |
1299 | /* SHORTSIZE: | |
1300 | * This symbol contains the value of sizeof(short) so that the C | |
1301 | * preprocessor can make decisions based on it. | |
1302 | */ | |
1303 | #define INTSIZE 4 /**/ | |
1304 | #define LONGSIZE 4 /**/ | |
1305 | #define SHORTSIZE 2 /**/ | |
1306 | ||
1307 | /* Off_t: | |
1308 | * This symbol holds the type used to declare offsets in the kernel. | |
1309 | * It can be int, long, off_t, etc... It may be necessary to include | |
1310 | * <sys/types.h> to get any typedef'ed information. | |
1311 | */ | |
1312 | #define Off_t off_t /* <offset> type */ | |
1313 | ||
1314 | /* Mode_t: | |
1315 | * This symbol holds the type used to declare file modes | |
1316 | * for systems calls. It is usually mode_t, but may be | |
1317 | * int or unsigned short. It may be necessary to include <sys/types.h> | |
1318 | * to get any typedef'ed information. | |
1319 | */ | |
1320 | #define Mode_t mode_t /* file mode parameter for system calls */ | |
1321 | ||
1322 | /* VAL_O_NONBLOCK: | |
1323 | * This symbol is to be used during open() or fcntl(F_SETFL) to turn on | |
1324 | * non-blocking I/O for the file descriptor. Note that there is no way | |
1325 | * back, i.e. you cannot turn it blocking again this way. If you wish to | |
1326 | * alternatively switch between blocking and non-blocking, use the | |
1327 | * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. | |
1328 | */ | |
1329 | /* VAL_EAGAIN: | |
1330 | * This symbol holds the errno error code set by read() when no data was | |
1331 | * present on the non-blocking file descriptor. | |
1332 | */ | |
1333 | /* RD_NODATA: | |
1334 | * This symbol holds the return code from read() when no data is present | |
1335 | * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is | |
1336 | * not defined, then you can't distinguish between no data and EOF by | |
1337 | * issuing a read(). You'll have to find another way to tell for sure! | |
1338 | */ | |
1339 | /* EOF_NONBLOCK: | |
1340 | * This symbol, if defined, indicates to the C program that a read() on | |
1341 | * a non-blocking file descriptor will return 0 on EOF, and not the value | |
1342 | * held in RD_NODATA (-1 usually, in that case!). | |
1343 | */ | |
1344 | #define VAL_O_NONBLOCK O_NONBLOCK | |
1345 | #define VAL_EAGAIN EAGAIN | |
1346 | #define RD_NODATA -1 | |
1347 | #define EOF_NONBLOCK | |
1348 | ||
1349 | /* CAN_PROTOTYPE: | |
1350 | * If defined, this macro indicates that the C compiler can handle | |
1351 | * function prototypes. | |
1352 | */ | |
1353 | /* _: | |
1354 | * This macro is used to declare function parameters for folks who want | |
1355 | * to make declarations with prototypes using a different style than | |
1356 | * the above macros. Use double parentheses. For example: | |
1357 | * | |
1358 | * int main _((int argc, char *argv[])); | |
1359 | */ | |
1360 | #define CAN_PROTOTYPE /**/ | |
1361 | #ifdef CAN_PROTOTYPE | |
1362 | #define _(args) args | |
1363 | #else | |
1364 | #define _(args) () | |
1365 | #endif | |
1366 | ||
1367 | /* RANDBITS: | |
1368 | * This symbol contains the number of bits of random number the rand() | |
1369 | * function produces. Usual values are 15, 16, and 31. | |
1370 | */ | |
1371 | #define RANDBITS 15 /**/ | |
1372 | ||
1373 | /* Select_fd_set_t: | |
1374 | * This symbol holds the type used for the 2nd, 3rd, and 4th | |
1375 | * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET | |
1376 | * is defined, and 'int *' otherwise. This is only useful if you | |
1377 | * have select(), of course. | |
1378 | */ | |
55d25626 | 1379 | #define Select_fd_set_t Perl_fd_set * /**/ |
08aa1457 | 1380 | |
1381 | /* Size_t: | |
1382 | * This symbol holds the type used to declare length parameters | |
1383 | * for string functions. It is usually size_t, but may be | |
1384 | * unsigned long, int, etc. It may be necessary to include | |
1385 | * <sys/types.h> to get any typedef'ed information. | |
1386 | */ | |
1387 | #define Size_t size_t /* length paramater for string functions */ | |
1388 | ||
1389 | /* SSize_t: | |
1390 | * This symbol holds the type used by functions that return | |
1391 | * a count of bytes or an error condition. It must be a signed type. | |
1392 | * It is usually ssize_t, but may be long or int, etc. | |
1393 | * It may be necessary to include <sys/types.h> or <unistd.h> | |
1394 | * to get any typedef'ed information. | |
1395 | * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). | |
1396 | */ | |
1397 | #define SSize_t int /* signed count of bytes */ | |
1398 | ||
1399 | /* STDCHAR: | |
1400 | * This symbol is defined to be the type of char used in stdio.h. | |
1401 | * It has the values "unsigned char" or "char". | |
1402 | */ | |
4e35701f | 1403 | #define STDCHAR char /**/ |
08aa1457 | 1404 | |
1405 | /* Uid_t: | |
1406 | * This symbol holds the type used to declare user ids in the kernel. | |
1407 | * It can be int, ushort, uid_t, etc... It may be necessary to include | |
1408 | * <sys/types.h> to get any typedef'ed information. | |
1409 | */ | |
1410 | #define Uid_t uid_t /* UID type */ | |
1411 | ||
1412 | /* LOC_SED: | |
1413 | * This symbol holds the complete pathname to the sed program. | |
1414 | */ | |
1415 | #define LOC_SED "" /**/ | |
1416 | ||
1417 | /* OSNAME: | |
1418 | * This symbol contains the name of the operating system, as determined | |
1419 | * by Configure. You shouldn't rely on it too much; the specific | |
1420 | * feature tests from Configure are generally more reliable. | |
1421 | */ | |
1422 | #define OSNAME "MSWin32" /**/ | |
1423 | ||
1424 | /* ARCHLIB: | |
1425 | * This variable, if defined, holds the name of the directory in | |
1426 | * which the user wants to put architecture-dependent public | |
1427 | * library files for perl5. It is most often a local directory | |
1428 | * such as /usr/local/lib. Programs using this variable must be | |
1429 | * prepared to deal with filename expansion. If ARCHLIB is the | |
1430 | * same as PRIVLIB, it is not defined, since presumably the | |
1431 | * program already searches PRIVLIB. | |
1432 | */ | |
1433 | /* ARCHLIB_EXP: | |
1434 | * This symbol contains the ~name expanded version of ARCHLIB, to be used | |
1435 | * in programs that are not prepared to deal with ~ expansion at run-time. | |
1436 | */ | |
1437 | #define ARCHLIB "c:\\perl\\lib" /**/ | |
1438 | #define ARCHLIB_EXP (win32PerlLibPath()) /**/ | |
1439 | ||
1440 | /* BINCOMPAT3: | |
1441 | * This symbol, if defined, indicates that Perl 5.004 should be | |
1442 | * binary-compatible with Perl 5.003. | |
1443 | */ | |
1444 | /*#define BINCOMPAT3 /**/ | |
1445 | ||
1446 | /* BYTEORDER: | |
1447 | * This symbol holds the hexadecimal constant defined in byteorder, | |
1448 | * i.e. 0x1234 or 0x4321, etc... | |
1449 | * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture | |
1450 | * Binaries (MAB) on either big endian or little endian machines. | |
1451 | * The endian-ness is available at compile-time. This only matters | |
1452 | * for perl, where the config.h can be generated and installed on | |
1453 | * one system, and used by a different architecture to build an | |
1454 | * extension. Older versions of NeXT that might not have | |
1455 | * defined either *_ENDIAN__ were all on Motorola 680x0 series, | |
1456 | * so the default case (for NeXT) is big endian to catch them. | |
1457 | * This might matter for NeXT 3.0. | |
1458 | */ | |
1459 | #ifndef NeXT | |
1460 | #define BYTEORDER 0x1234 /* large digits for MSB */ | |
1461 | #else /* NeXT */ | |
1462 | #ifdef __LITTLE_ENDIAN__ | |
1463 | #define BYTEORDER 0x1234 | |
1464 | #else /* __BIG_ENDIAN__ */ | |
1465 | #define BYTEORDER 0x4321 | |
1466 | #endif /* ENDIAN CHECK */ | |
1467 | #endif /* NeXT */ | |
1468 | ||
1469 | /* CSH: | |
1470 | * This symbol, if defined, indicates that the C-shell exists. | |
1471 | * If defined, contains the full pathname of csh. | |
1472 | */ | |
1473 | /*#define CSH "" /**/ | |
1474 | ||
1475 | /* DLSYM_NEEDS_UNDERSCORE: | |
1476 | * This symbol, if defined, indicates that we need to prepend an | |
1477 | * underscore to the symbol name before calling dlsym(). This only | |
1478 | * makes sense if you *have* dlsym, which we will presume is the | |
1479 | * case if you're using dl_dlopen.xs. | |
1480 | */ | |
1481 | /*#define DLSYM_NEEDS_UNDERSCORE /**/ | |
1482 | ||
1483 | /* SETUID_SCRIPTS_ARE_SECURE_NOW: | |
1484 | * This symbol, if defined, indicates that the bug that prevents | |
1485 | * setuid scripts from being secure is not present in this kernel. | |
1486 | */ | |
1487 | /* DOSUID: | |
1488 | * This symbol, if defined, indicates that the C program should | |
1489 | * check the script that it is executing for setuid/setgid bits, and | |
1490 | * attempt to emulate setuid/setgid on systems that have disabled | |
1491 | * setuid #! scripts because the kernel can't do it securely. | |
1492 | * It is up to the package designer to make sure that this emulation | |
1493 | * is done securely. Among other things, it should do an fstat on | |
1494 | * the script it just opened to make sure it really is a setuid/setgid | |
1495 | * script, it should make sure the arguments passed correspond exactly | |
1496 | * to the argument on the #! line, and it should not trust any | |
1497 | * subprocesses to which it must pass the filename rather than the | |
1498 | * file descriptor of the script to be executed. | |
1499 | */ | |
1500 | /*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/ | |
1501 | /*#define DOSUID /**/ | |
1502 | ||
1503 | /* Gconvert: | |
1504 | * This preprocessor macro is defined to convert a floating point | |
1505 | * number to a string without a trailing decimal point. This | |
1506 | * emulates the behavior of sprintf("%g"), but is sometimes much more | |
1507 | * efficient. If gconvert() is not available, but gcvt() drops the | |
1508 | * trailing decimal point, then gcvt() is used. If all else fails, | |
1509 | * a macro using sprintf("%g") is used. Arguments for the Gconvert | |
1510 | * macro are: value, number of digits, whether trailing zeros should | |
1511 | * be retained, and the output buffer. | |
1512 | * Possible values are: | |
1513 | * d_Gconvert='gconvert((x),(n),(t),(b))' | |
1514 | * d_Gconvert='gcvt((x),(n),(b))' | |
1515 | * d_Gconvert='sprintf((b),"%.*g",(n),(x))' | |
1516 | * The last two assume trailing zeros should not be kept. | |
1517 | */ | |
1518 | #define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x)) | |
1519 | ||
1520 | /* HAS_GETPGID: | |
1521 | * This symbol, if defined, indicates to the C program that | |
1522 | * the getpgid(pid) function is available to get the | |
1523 | * process group id. | |
1524 | */ | |
1525 | /*#define HAS_GETPGID /**/ | |
1526 | ||
1527 | /* HAS_GETPGRP: | |
1528 | * This symbol, if defined, indicates that the getpgrp routine is | |
1529 | * available to get the current process group. | |
1530 | */ | |
1531 | /* USE_BSD_GETPGRP: | |
1532 | * This symbol, if defined, indicates that getpgrp needs one | |
1533 | * arguments whereas USG one needs none. | |
1534 | */ | |
1535 | /*#define HAS_GETPGRP /**/ | |
1536 | /*#define USE_BSD_GETPGRP /**/ | |
1537 | ||
1538 | /* HAS_INET_ATON: | |
1539 | * This symbol, if defined, indicates to the C program that the | |
1540 | * inet_aton() function is available to parse IP address "dotted-quad" | |
1541 | * strings. | |
1542 | */ | |
1543 | /*#define HAS_INET_ATON /**/ | |
1544 | ||
1545 | /* HAS_SETPGID: | |
1546 | * This symbol, if defined, indicates to the C program that | |
1547 | * the setpgid(pid, gpid) function is available to set the | |
1548 | * process group id. | |
1549 | */ | |
1550 | /*#define HAS_SETPGID /**/ | |
1551 | ||
1552 | /* HAS_SETPGRP: | |
1553 | * This symbol, if defined, indicates that the setpgrp routine is | |
1554 | * available to set the current process group. | |
1555 | */ | |
1556 | /* USE_BSD_SETPGRP: | |
1557 | * This symbol, if defined, indicates that setpgrp needs two | |
1558 | * arguments whereas USG one needs none. See also HAS_SETPGID | |
1559 | * for a POSIX interface. | |
1560 | */ | |
1561 | /* USE_BSDPGRP: | |
1562 | * This symbol, if defined, indicates that the BSD notion of process | |
1563 | * group is to be used. For instance, you have to say setpgrp(pid, pgrp) | |
1564 | * instead of the USG setpgrp(). This should be obsolete since | |
1565 | * there are systems which have BSD-ish setpgrp but USG-ish getpgrp. | |
1566 | */ | |
1567 | /*#define HAS_SETPGRP /**/ | |
1568 | /*#define USE_BSD_SETPGRP /**/ | |
1569 | /*#define USE_BSDPGRP /**/ | |
1570 | ||
1571 | /* USE_SFIO: | |
1572 | * This symbol, if defined, indicates that sfio should | |
1573 | * be used. | |
1574 | */ | |
1575 | /*#define USE_SFIO /**/ | |
1576 | ||
1577 | /* Sigjmp_buf: | |
1578 | * This is the buffer type to be used with Sigsetjmp and Siglongjmp. | |
1579 | */ | |
1580 | /* Sigsetjmp: | |
1581 | * This macro is used in the same way as sigsetjmp(), but will invoke | |
1582 | * traditional setjmp() if sigsetjmp isn't available. | |
1583 | * See HAS_SIGSETJMP. | |
1584 | */ | |
1585 | /* Siglongjmp: | |
1586 | * This macro is used in the same way as siglongjmp(), but will invoke | |
1587 | * traditional longjmp() if siglongjmp isn't available. | |
1588 | * See HAS_SIGSETJMP. | |
1589 | */ | |
1590 | /*#define HAS_SIGSETJMP /**/ | |
1591 | #ifdef HAS_SIGSETJMP | |
1592 | #define Sigjmp_buf sigjmp_buf | |
1593 | #define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) | |
1594 | #define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) | |
1595 | #else | |
1596 | #define Sigjmp_buf jmp_buf | |
1597 | #define Sigsetjmp(buf,save_mask) setjmp((buf)) | |
1598 | #define Siglongjmp(buf,retval) longjmp((buf),(retval)) | |
1599 | #endif | |
1600 | ||
1601 | /* USE_DYNAMIC_LOADING: | |
1602 | * This symbol, if defined, indicates that dynamic loading of | |
1603 | * some sort is available. | |
1604 | */ | |
1605 | #define USE_DYNAMIC_LOADING /**/ | |
1606 | ||
1607 | /* I_DBM: | |
1608 | * This symbol, if defined, indicates that <dbm.h> exists and should | |
1609 | * be included. | |
1610 | */ | |
1611 | /* I_RPCSVC_DBM: | |
1612 | * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and | |
1613 | * should be included. | |
1614 | */ | |
1615 | /*#define I_DBM /**/ | |
1616 | #define I_RPCSVC_DBM /**/ | |
1617 | ||
1618 | /* I_LOCALE: | |
1619 | * This symbol, if defined, indicates to the C program that it should | |
1620 | * include <locale.h>. | |
1621 | */ | |
1622 | #define I_LOCALE /**/ | |
1623 | ||
1624 | /* I_SFIO: | |
1625 | * This symbol, if defined, indicates to the C program that it should | |
1626 | * include <sfio.h>. | |
1627 | */ | |
1628 | /*#define I_SFIO /**/ | |
1629 | ||
1630 | /* I_SYS_STAT: | |
1631 | * This symbol, if defined, indicates to the C program that it should | |
1632 | * include <sys/stat.h>. | |
1633 | */ | |
1634 | #define I_SYS_STAT /**/ | |
1635 | ||
1636 | /* I_VALUES: | |
1637 | * This symbol, if defined, indicates to the C program that it should | |
1638 | * include <values.h> to get definition of symbols like MINFLOAT or | |
1639 | * MAXLONG, i.e. machine dependant limitations. Probably, you | |
1640 | * should use <limits.h> instead, if it is available. | |
1641 | */ | |
1642 | /*#define I_VALUES /**/ | |
1643 | ||
1644 | /* Free_t: | |
1645 | * This variable contains the return type of free(). It is usually | |
1646 | * void, but occasionally int. | |
1647 | */ | |
1648 | /* Malloc_t: | |
1649 | * This symbol is the type of pointer returned by malloc and realloc. | |
1650 | */ | |
1651 | #define Malloc_t void * /**/ | |
1652 | #define Free_t void /**/ | |
1653 | ||
1654 | /* MYMALLOC: | |
1655 | * This symbol, if defined, indicates that we're using our own malloc. | |
1656 | */ | |
bbc8f9de | 1657 | #define MYMALLOC /**/ |
08aa1457 | 1658 | |
1659 | /* OLDARCHLIB: | |
1660 | * This variable, if defined, holds the name of the directory in | |
1661 | * which the user has perl5.000 or perl5.001 architecture-dependent | |
1662 | * public library files for perl5. For the most part, these | |
1663 | * files will work with 5.002 (and later), but that is not | |
1664 | * guaranteed. | |
1665 | */ | |
1666 | /* OLDARCHLIB_EXP: | |
1667 | * This symbol contains the ~name expanded version of OLDARCHLIB, to be | |
1668 | * used in programs that are not prepared to deal with ~ expansion at | |
1669 | * run-time. | |
1670 | */ | |
1671 | /*#define OLDARCHLIB "" /**/ | |
1672 | /*#define OLDARCHLIB_EXP "" /**/ | |
1673 | ||
1674 | /* PRIVLIB: | |
1675 | * This symbol contains the name of the private library for this package. | |
1676 | * The library is private in the sense that it needn't be in anyone's | |
1677 | * execution path, but it should be accessible by the world. The program | |
1678 | * should be prepared to do ~ expansion. | |
1679 | */ | |
1680 | /* PRIVLIB_EXP: | |
1681 | * This symbol contains the ~name expanded version of PRIVLIB, to be used | |
1682 | * in programs that are not prepared to deal with ~ expansion at run-time. | |
1683 | */ | |
1684 | #define PRIVLIB "c:\\perl\\lib" /**/ | |
1685 | #define PRIVLIB_EXP "c:\\perl\\lib" /**/ | |
1686 | ||
1687 | /* SH_PATH: | |
1688 | * This symbol contains the full pathname to the shell used on this | |
1689 | * on this system to execute Bourne shell scripts. Usually, this will be | |
1690 | * /bin/sh, though it's possible that some systems will have /bin/ksh, | |
1691 | * /bin/pdksh, /bin/ash, /bin/bash, or even something such as | |
1692 | * D:/bin/sh.exe. | |
1693 | */ | |
6890e559 | 1694 | #define SH_PATH "cmd.exe" /**/ |
08aa1457 | 1695 | |
1696 | /* SIG_NAME: | |
1697 | * This symbol contains a list of signal names in order of | |
1698 | * signal number. This is intended | |
1699 | * to be used as a static array initialization, like this: | |
1700 | * char *sig_name[] = { SIG_NAME }; | |
1701 | * The signals in the list are separated with commas, and each signal | |
1702 | * is surrounded by double quotes. There is no leading SIG in the signal | |
1703 | * name, i.e. SIGQUIT is known as "QUIT". | |
1704 | * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, | |
1705 | * etc., where nn is the actual signal number (e.g. NUM37). | |
1706 | * The signal number for sig_name[i] is stored in sig_num[i]. | |
1707 | * The last element is 0 to terminate the list with a NULL. This | |
1708 | * corresponds to the 0 at the end of the sig_num list. | |
1709 | */ | |
1710 | /* SIG_NUM: | |
1711 | * This symbol contains a list of signal numbers, in the same order as the | |
1712 | * SIG_NAME list. It is suitable for static array initialization, as in: | |
1713 | * int sig_num[] = { SIG_NUM }; | |
1714 | * The signals in the list are separated with commas, and the indices | |
1715 | * within that list and the SIG_NAME list match, so it's easy to compute | |
1716 | * the signal name from a number or vice versa at the price of a small | |
1717 | * dynamic linear lookup. | |
1718 | * Duplicates are allowed, but are moved to the end of the list. | |
1719 | * The signal number corresponding to sig_name[i] is sig_number[i]. | |
1720 | * if (i < NSIG) then sig_number[i] == i. | |
1721 | * The last element is 0, corresponding to the 0 at the end of | |
1722 | * the sig_name list. | |
1723 | */ | |
1724 | #define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","TRAP","ABRT","EMT","FPE","KILL","BUS","SEGV","SYS","PIPE","ALRM","TERM","USR1","USR2","CHLD","PWR","WINCH","URG","IO","STOP","TSTP","CONT","TTIN","TTOU","VTALRM","PROF","XCPU","XFSZ","WAITING","LWP","FREEZE","THAW","RTMIN","NUM37","NUM38","NUM39","NUM40","NUM41","NUM42","RTMAX","IOT","CLD","POLL",0 /**/ | |
1725 | #define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,6,18,22,0 /**/ | |
1726 | ||
1727 | /* SITEARCH: | |
1728 | * This symbol contains the name of the private library for this package. | |
1729 | * The library is private in the sense that it needn't be in anyone's | |
1730 | * execution path, but it should be accessible by the world. The program | |
1731 | * should be prepared to do ~ expansion. | |
1732 | * The standard distribution will put nothing in this directory. | |
1733 | * Individual sites may place their own extensions and modules in | |
1734 | * this directory. | |
1735 | */ | |
1736 | /* SITEARCH_EXP: | |
1737 | * This symbol contains the ~name expanded version of SITEARCH, to be used | |
1738 | * in programs that are not prepared to deal with ~ expansion at run-time. | |
1739 | */ | |
1740 | #define SITEARCH "c:\\perl\\lib\\site" /**/ | |
1741 | #define SITEARCH_EXP "c:\\perl\\lib\\site" /**/ | |
1742 | ||
1743 | /* SITELIB: | |
1744 | * This symbol contains the name of the private library for this package. | |
1745 | * The library is private in the sense that it needn't be in anyone's | |
1746 | * execution path, but it should be accessible by the world. The program | |
1747 | * should be prepared to do ~ expansion. | |
1748 | * The standard distribution will put nothing in this directory. | |
1749 | * Individual sites may place their own extensions and modules in | |
1750 | * this directory. | |
1751 | */ | |
1752 | /* SITELIB_EXP: | |
1753 | * This symbol contains the ~name expanded version of SITELIB, to be used | |
1754 | * in programs that are not prepared to deal with ~ expansion at run-time. | |
1755 | */ | |
1756 | #define SITELIB "c:\\perl\\lib\\site" /**/ | |
1757 | #define SITELIB_EXP "c:\\perl\\lib\\site" /**/ | |
1758 | ||
1759 | /* STARTPERL: | |
1760 | * This variable contains the string to put in front of a perl | |
1761 | * script to make sure (one hopes) that it runs with perl and not | |
1762 | * some shell. | |
1763 | */ | |
1764 | #define STARTPERL "#perl" /**/ | |
1765 | ||
1766 | /* USE_PERLIO: | |
1767 | * This symbol, if defined, indicates that the PerlIO abstraction should | |
1768 | * be used throughout. If not defined, stdio should be | |
1769 | * used in a fully backward compatible manner. | |
1770 | */ | |
1771 | /*#define USE_PERLIO /**/ | |
1772 | ||
1773 | /* VOIDFLAGS: | |
1774 | * This symbol indicates how much support of the void type is given by this | |
1775 | * compiler. What various bits mean: | |
1776 | * | |
1777 | * 1 = supports declaration of void | |
1778 | * 2 = supports arrays of pointers to functions returning void | |
1779 | * 4 = supports comparisons between pointers to void functions and | |
1780 | * addresses of void functions | |
1781 | * 8 = suports declaration of generic void pointers | |
1782 | * | |
1783 | * The package designer should define VOIDUSED to indicate the requirements | |
1784 | * of the package. This can be done either by #defining VOIDUSED before | |
1785 | * including config.h, or by defining defvoidused in Myinit.U. If the | |
1786 | * latter approach is taken, only those flags will be tested. If the | |
1787 | * level of void support necessary is not present, defines void to int. | |
1788 | */ | |
1789 | #ifndef VOIDUSED | |
1790 | #define VOIDUSED 15 | |
1791 | #endif | |
1792 | #define VOIDFLAGS 15 | |
1793 | #if (VOIDFLAGS & VOIDUSED) != VOIDUSED | |
1794 | #define void int /* is void to be avoided? */ | |
1795 | #define M_VOID /* Xenix strikes again */ | |
1796 | #endif | |
1797 | ||
1798 | #endif | |
1799 | #include <win32.h> | |
1800 | #ifndef DEBUGGING | |
1801 | #define DEBUGGING | |
1802 | #endif |