This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
Extract _DB__handle_question_mark_command() .
[perl5.git] / lib / perl5db.pl
CommitLineData
e22ea7cc 1
b570d64b 2=head1 NAME
69893cff 3
be9a9b1d 4perl5db.pl - the perl debugger
69893cff
RGS
5
6=head1 SYNOPSIS
7
8 perl -d your_Perl_script
9
10=head1 DESCRIPTION
11
12C<perl5db.pl> is the perl debugger. It is loaded automatically by Perl when
13you invoke a script with C<perl -d>. This documentation tries to outline the
14structure and services provided by C<perl5db.pl>, and to describe how you
15can use them.
16
17=head1 GENERAL NOTES
18
19The debugger can look pretty forbidding to many Perl programmers. There are
20a number of reasons for this, many stemming out of the debugger's history.
21
22When the debugger was first written, Perl didn't have a lot of its nicer
23features - no references, no lexical variables, no closures, no object-oriented
24programming. So a lot of the things one would normally have done using such
b570d64b 25features was done using global variables, globs and the C<local()> operator
69893cff
RGS
26in creative ways.
27
28Some of these have survived into the current debugger; a few of the more
29interesting and still-useful idioms are noted in this section, along with notes
30on the comments themselves.
31
32=head2 Why not use more lexicals?
33
34Experienced Perl programmers will note that the debugger code tends to use
35mostly package globals rather than lexically-scoped variables. This is done
36to allow a significant amount of control of the debugger from outside the
b570d64b 37debugger itself.
69893cff
RGS
38
39Unfortunately, though the variables are accessible, they're not well
40documented, so it's generally been a decision that hasn't made a lot of
41difference to most users. Where appropriate, comments have been added to
42make variables more accessible and usable, with the understanding that these
be9a9b1d 43I<are> debugger internals, and are therefore subject to change. Future
69893cff
RGS
44development should probably attempt to replace the globals with a well-defined
45API, but for now, the variables are what we've got.
46
47=head2 Automated variable stacking via C<local()>
48
b570d64b 49As you may recall from reading C<perlfunc>, the C<local()> operator makes a
69893cff 50temporary copy of a variable in the current scope. When the scope ends, the
b570d64b 51old copy is restored. This is often used in the debugger to handle the
69893cff
RGS
52automatic stacking of variables during recursive calls:
53
54 sub foo {
55 local $some_global++;
56
57 # Do some stuff, then ...
58 return;
59 }
60
61What happens is that on entry to the subroutine, C<$some_global> is localized,
b570d64b 62then altered. When the subroutine returns, Perl automatically undoes the
69893cff
RGS
63localization, restoring the previous value. Voila, automatic stack management.
64
b570d64b 65The debugger uses this trick a I<lot>. Of particular note is C<DB::eval>,
69893cff
RGS
66which lets the debugger get control inside of C<eval>'ed code. The debugger
67localizes a saved copy of C<$@> inside the subroutine, which allows it to
68keep C<$@> safe until it C<DB::eval> returns, at which point the previous
b570d64b 69value of C<$@> is restored. This makes it simple (well, I<simpler>) to keep
69893cff
RGS
70track of C<$@> inside C<eval>s which C<eval> other C<eval's>.
71
72In any case, watch for this pattern. It occurs fairly often.
73
74=head2 The C<^> trick
75
b570d64b 76This is used to cleverly reverse the sense of a logical test depending on
69893cff 77the value of an auxiliary variable. For instance, the debugger's C<S>
b570d64b 78(search for subroutines by pattern) allows you to negate the pattern
69893cff
RGS
79like this:
80
81 # Find all non-'foo' subs:
b570d64b 82 S !/foo/
69893cff
RGS
83
84Boolean algebra states that the truth table for XOR looks like this:
85
86=over 4
87
b570d64b 88=item * 0 ^ 0 = 0
69893cff
RGS
89
90(! not present and no match) --> false, don't print
91
b570d64b 92=item * 0 ^ 1 = 1
69893cff
RGS
93
94(! not present and matches) --> true, print
95
b570d64b 96=item * 1 ^ 0 = 1
69893cff
RGS
97
98(! present and no match) --> true, print
99
b570d64b 100=item * 1 ^ 1 = 0
69893cff
RGS
101
102(! present and matches) --> false, don't print
103
104=back
105
106As you can see, the first pair applies when C<!> isn't supplied, and
be9a9b1d 107the second pair applies when it is. The XOR simply allows us to
b570d64b 108compact a more complicated if-then-elseif-else into a more elegant
69893cff
RGS
109(but perhaps overly clever) single test. After all, it needed this
110explanation...
111
112=head2 FLAGS, FLAGS, FLAGS
113
114There is a certain C programming legacy in the debugger. Some variables,
be9a9b1d 115such as C<$single>, C<$trace>, and C<$frame>, have I<magical> values composed
69893cff 116of 1, 2, 4, etc. (powers of 2) OR'ed together. This allows several pieces
b570d64b 117of state to be stored independently in a single scalar.
69893cff
RGS
118
119A test like
120
121 if ($scalar & 4) ...
122
b570d64b 123is checking to see if the appropriate bit is on. Since each bit can be
69893cff 124"addressed" independently in this way, C<$scalar> is acting sort of like
b570d64b 125an array of bits. Obviously, since the contents of C<$scalar> are just a
69893cff
RGS
126bit-pattern, we can save and restore it easily (it will just look like
127a number).
128
129The problem, is of course, that this tends to leave magic numbers scattered
b570d64b 130all over your program whenever a bit is set, cleared, or checked. So why do
69893cff
RGS
131it?
132
133=over 4
134
be9a9b1d 135=item *
69893cff 136
be9a9b1d 137First, doing an arithmetical or bitwise operation on a scalar is
69893cff 138just about the fastest thing you can do in Perl: C<use constant> actually
be9a9b1d 139creates a subroutine call, and array and hash lookups are much slower. Is
b570d64b 140this over-optimization at the expense of readability? Possibly, but the
69893cff
RGS
141debugger accesses these variables a I<lot>. Any rewrite of the code will
142probably have to benchmark alternate implementations and see which is the
b570d64b 143best balance of readability and speed, and then document how it actually
69893cff
RGS
144works.
145
be9a9b1d
AT
146=item *
147
b570d64b 148Second, it's very easy to serialize a scalar number. This is done in
69893cff
RGS
149the restart code; the debugger state variables are saved in C<%ENV> and then
150restored when the debugger is restarted. Having them be just numbers makes
b570d64b 151this trivial.
69893cff 152
be9a9b1d
AT
153=item *
154
b570d64b
SF
155Third, some of these variables are being shared with the Perl core
156smack in the middle of the interpreter's execution loop. It's much faster for
157a C program (like the interpreter) to check a bit in a scalar than to access
69893cff
RGS
158several different variables (or a Perl array).
159
160=back
161
162=head2 What are those C<XXX> comments for?
163
164Any comment containing C<XXX> means that the comment is either somewhat
b570d64b 165speculative - it's not exactly clear what a given variable or chunk of
69893cff
RGS
166code is doing, or that it is incomplete - the basics may be clear, but the
167subtleties are not completely documented.
168
169Send in a patch if you can clear up, fill out, or clarify an C<XXX>.
170
b570d64b 171=head1 DATA STRUCTURES MAINTAINED BY CORE
69893cff
RGS
172
173There are a number of special data structures provided to the debugger by
174the Perl interpreter.
175
7e17a74c
JJ
176The array C<@{$main::{'_<'.$filename}}> (aliased locally to C<@dbline>
177via glob assignment) contains the text from C<$filename>, with each
178element corresponding to a single line of C<$filename>. Additionally,
179breakable lines will be dualvars with the numeric component being the
180memory address of a COP node. Non-breakable lines are dualvar to 0.
69893cff 181
b570d64b
SF
182The hash C<%{'_<'.$filename}> (aliased locally to C<%dbline> via glob
183assignment) contains breakpoints and actions. The keys are line numbers;
184you can set individual values, but not the whole hash. The Perl interpreter
69893cff 185uses this hash to determine where breakpoints have been set. Any true value is
be9a9b1d 186considered to be a breakpoint; C<perl5db.pl> uses C<$break_condition\0$action>.
69893cff
RGS
187Values are magical in numeric context: 1 if the line is breakable, 0 if not.
188
ef18ae63 189The scalar C<${"_<$filename"}> simply contains the string C<<< _<$filename> >>>.
be9a9b1d
AT
190This is also the case for evaluated strings that contain subroutines, or
191which are currently being executed. The $filename for C<eval>ed strings looks
d24ca0c5 192like C<(eval 34).
69893cff
RGS
193
194=head1 DEBUGGER STARTUP
195
196When C<perl5db.pl> starts, it reads an rcfile (C<perl5db.ini> for
197non-interactive sessions, C<.perldb> for interactive ones) that can set a number
198of options. In addition, this file may define a subroutine C<&afterinit>
b570d64b 199that will be executed (in the debugger's context) after the debugger has
69893cff
RGS
200initialized itself.
201
b570d64b 202Next, it checks the C<PERLDB_OPTS> environment variable and treats its
be9a9b1d 203contents as the argument of a C<o> command in the debugger.
69893cff
RGS
204
205=head2 STARTUP-ONLY OPTIONS
206
207The following options can only be specified at startup.
208To set them in your rcfile, add a call to
209C<&parse_options("optionName=new_value")>.
210
211=over 4
212
b570d64b 213=item * TTY
69893cff
RGS
214
215the TTY to use for debugging i/o.
216
b570d64b 217=item * noTTY
69893cff
RGS
218
219if set, goes in NonStop mode. On interrupt, if TTY is not set,
b0e77abc 220uses the value of noTTY or F<$HOME/.perldbtty$$> to find TTY using
69893cff
RGS
221Term::Rendezvous. Current variant is to have the name of TTY in this
222file.
223
b570d64b 224=item * ReadLine
69893cff 225
5561b870 226if false, a dummy ReadLine is used, so you can debug
69893cff
RGS
227ReadLine applications.
228
b570d64b 229=item * NonStop
69893cff
RGS
230
231if true, no i/o is performed until interrupt.
232
b570d64b 233=item * LineInfo
69893cff
RGS
234
235file or pipe to print line number info to. If it is a
236pipe, a short "emacs like" message is used.
237
b570d64b 238=item * RemotePort
69893cff
RGS
239
240host:port to connect to on remote host for remote debugging.
241
5561b870
AK
242=item * HistFile
243
244file to store session history to. There is no default and so no
245history file is written unless this variable is explicitly set.
246
247=item * HistSize
248
249number of commands to store to the file specified in C<HistFile>.
250Default is 100.
251
69893cff
RGS
252=back
253
254=head3 SAMPLE RCFILE
255
256 &parse_options("NonStop=1 LineInfo=db.out");
257 sub afterinit { $trace = 1; }
258
259The script will run without human intervention, putting trace
260information into C<db.out>. (If you interrupt it, you had better
be9a9b1d 261reset C<LineInfo> to something I<interactive>!)
69893cff
RGS
262
263=head1 INTERNALS DESCRIPTION
264
265=head2 DEBUGGER INTERFACE VARIABLES
266
267Perl supplies the values for C<%sub>. It effectively inserts
be9a9b1d 268a C<&DB::DB();> in front of each place that can have a
69893cff
RGS
269breakpoint. At each subroutine call, it calls C<&DB::sub> with
270C<$DB::sub> set to the called subroutine. It also inserts a C<BEGIN
271{require 'perl5db.pl'}> before the first line.
272
273After each C<require>d file is compiled, but before it is executed, a
274call to C<&DB::postponed($main::{'_<'.$filename})> is done. C<$filename>
275is the expanded name of the C<require>d file (as found via C<%INC>).
276
277=head3 IMPORTANT INTERNAL VARIABLES
278
279=head4 C<$CreateTTY>
280
281Used to control when the debugger will attempt to acquire another TTY to be
b570d64b 282used for input.
69893cff 283
b570d64b 284=over
69893cff
RGS
285
286=item * 1 - on C<fork()>
287
288=item * 2 - debugger is started inside debugger
289
290=item * 4 - on startup
291
292=back
293
294=head4 C<$doret>
295
296The value -2 indicates that no return value should be printed.
297Any other positive value causes C<DB::sub> to print return values.
298
299=head4 C<$evalarg>
300
301The item to be eval'ed by C<DB::eval>. Used to prevent messing with the current
302contents of C<@_> when C<DB::eval> is called.
303
304=head4 C<$frame>
305
306Determines what messages (if any) will get printed when a subroutine (or eval)
b570d64b 307is entered or exited.
69893cff
RGS
308
309=over 4
310
311=item * 0 - No enter/exit messages
312
be9a9b1d 313=item * 1 - Print I<entering> messages on subroutine entry
69893cff
RGS
314
315=item * 2 - Adds exit messages on subroutine exit. If no other flag is on, acts like 1+2.
316
be9a9b1d 317=item * 4 - Extended messages: C<< <in|out> I<context>=I<fully-qualified sub name> from I<file>:I<line> >>. If no other flag is on, acts like 1+4.
69893cff
RGS
318
319=item * 8 - Adds parameter information to messages, and overloaded stringify and tied FETCH is enabled on the printed arguments. Ignored if C<4> is not on.
320
321=item * 16 - Adds C<I<context> return from I<subname>: I<value>> messages on subroutine/eval exit. Ignored if C<4> is is not on.
322
323=back
324
be9a9b1d 325To get everything, use C<$frame=30> (or C<o f=30> as a debugger command).
69893cff
RGS
326The debugger internally juggles the value of C<$frame> during execution to
327protect external modules that the debugger uses from getting traced.
328
329=head4 C<$level>
330
b570d64b
SF
331Tracks current debugger nesting level. Used to figure out how many
332C<E<lt>E<gt>> pairs to surround the line number with when the debugger
69893cff
RGS
333outputs a prompt. Also used to help determine if the program has finished
334during command parsing.
335
336=head4 C<$onetimeDump>
337
338Controls what (if anything) C<DB::eval()> will print after evaluating an
339expression.
340
341=over 4
342
343=item * C<undef> - don't print anything
344
345=item * C<dump> - use C<dumpvar.pl> to display the value returned
346
347=item * C<methods> - print the methods callable on the first item returned
348
349=back
350
351=head4 C<$onetimeDumpDepth>
352
be9a9b1d 353Controls how far down C<dumpvar.pl> will go before printing C<...> while
69893cff
RGS
354dumping a structure. Numeric. If C<undef>, print all levels.
355
356=head4 C<$signal>
357
358Used to track whether or not an C<INT> signal has been detected. C<DB::DB()>,
359which is called before every statement, checks this and puts the user into
360command mode if it finds C<$signal> set to a true value.
361
362=head4 C<$single>
363
364Controls behavior during single-stepping. Stacked in C<@stack> on entry to
365each subroutine; popped again at the end of each subroutine.
366
b570d64b 367=over 4
69893cff
RGS
368
369=item * 0 - run continuously.
370
be9a9b1d 371=item * 1 - single-step, go into subs. The C<s> command.
69893cff 372
be9a9b1d 373=item * 2 - single-step, don't go into subs. The C<n> command.
69893cff 374
be9a9b1d
AT
375=item * 4 - print current sub depth (turned on to force this when C<too much
376recursion> occurs.
69893cff
RGS
377
378=back
379
380=head4 C<$trace>
381
b570d64b 382Controls the output of trace information.
69893cff
RGS
383
384=over 4
385
386=item * 1 - The C<t> command was entered to turn on tracing (every line executed is printed)
387
388=item * 2 - watch expressions are active
389
390=item * 4 - user defined a C<watchfunction()> in C<afterinit()>
391
392=back
393
394=head4 C<$slave_editor>
395
3961 if C<LINEINFO> was directed to a pipe; 0 otherwise.
397
398=head4 C<@cmdfhs>
399
400Stack of filehandles that C<DB::readline()> will read commands from.
401Manipulated by the debugger's C<source> command and C<DB::readline()> itself.
402
403=head4 C<@dbline>
404
b570d64b 405Local alias to the magical line array, C<@{$main::{'_<'.$filename}}> ,
69893cff
RGS
406supplied by the Perl interpreter to the debugger. Contains the source.
407
408=head4 C<@old_watch>
409
410Previous values of watch expressions. First set when the expression is
411entered; reset whenever the watch expression changes.
412
413=head4 C<@saved>
414
415Saves important globals (C<$@>, C<$!>, C<$^E>, C<$,>, C<$/>, C<$\>, C<$^W>)
416so that the debugger can substitute safe values while it's running, and
417restore them when it returns control.
418
419=head4 C<@stack>
420
421Saves the current value of C<$single> on entry to a subroutine.
422Manipulated by the C<c> command to turn off tracing in all subs above the
423current one.
424
425=head4 C<@to_watch>
426
427The 'watch' expressions: to be evaluated before each line is executed.
428
429=head4 C<@typeahead>
430
431The typeahead buffer, used by C<DB::readline>.
432
433=head4 C<%alias>
434
435Command aliases. Stored as character strings to be substituted for a command
436entered.
437
438=head4 C<%break_on_load>
439
440Keys are file names, values are 1 (break when this file is loaded) or undef
441(don't break when it is loaded).
442
443=head4 C<%dbline>
444
be9a9b1d 445Keys are line numbers, values are C<condition\0action>. If used in numeric
69893cff
RGS
446context, values are 0 if not breakable, 1 if breakable, no matter what is
447in the actual hash entry.
448
449=head4 C<%had_breakpoints>
450
451Keys are file names; values are bitfields:
452
b570d64b 453=over 4
69893cff
RGS
454
455=item * 1 - file has a breakpoint in it.
456
457=item * 2 - file has an action in it.
458
459=back
460
461A zero or undefined value means this file has neither.
462
463=head4 C<%option>
464
465Stores the debugger options. These are character string values.
466
467=head4 C<%postponed>
468
469Saves breakpoints for code that hasn't been compiled yet.
470Keys are subroutine names, values are:
471
472=over 4
473
be9a9b1d 474=item * C<compile> - break when this sub is compiled
69893cff 475
be9a9b1d 476=item * C<< break +0 if <condition> >> - break (conditionally) at the start of this routine. The condition will be '1' if no condition was specified.
69893cff
RGS
477
478=back
479
480=head4 C<%postponed_file>
481
482This hash keeps track of breakpoints that need to be set for files that have
483not yet been compiled. Keys are filenames; values are references to hashes.
484Each of these hashes is keyed by line number, and its values are breakpoint
be9a9b1d 485definitions (C<condition\0action>).
69893cff
RGS
486
487=head1 DEBUGGER INITIALIZATION
488
489The debugger's initialization actually jumps all over the place inside this
b570d64b
SF
490package. This is because there are several BEGIN blocks (which of course
491execute immediately) spread through the code. Why is that?
69893cff 492
b570d64b 493The debugger needs to be able to change some things and set some things up
69893cff
RGS
494before the debugger code is compiled; most notably, the C<$deep> variable that
495C<DB::sub> uses to tell when a program has recursed deeply. In addition, the
496debugger has to turn off warnings while the debugger code is compiled, but then
497restore them to their original setting before the program being debugged begins
498executing.
499
500The first C<BEGIN> block simply turns off warnings by saving the current
501setting of C<$^W> and then setting it to zero. The second one initializes
502the debugger variables that are needed before the debugger begins executing.
b570d64b 503The third one puts C<$^X> back to its former value.
69893cff
RGS
504
505We'll detail the second C<BEGIN> block later; just remember that if you need
506to initialize something before the debugger starts really executing, that's
507where it has to go.
508
509=cut
510
a687059c
LW
511package DB;
512
6b24a4b7
SF
513use strict;
514
2dbd01ad 515BEGIN {eval 'use IO::Handle'}; # Needed for flush only? breaks under miniperl
9eba6a4e 516
e56c1e8d
SF
517BEGIN {
518 require feature;
519 $^V =~ /^v(\d+\.\d+)/;
520 feature->import(":$1");
521}
522
54d04a52 523# Debugger for Perl 5.00x; perl5db.pl patch level:
6b24a4b7
SF
524use vars qw($VERSION $header);
525
931d9438 526$VERSION = '1.39_05';
69893cff 527
e22ea7cc 528$header = "perl5db.pl version $VERSION";
d338d6fe 529
69893cff
RGS
530=head1 DEBUGGER ROUTINES
531
532=head2 C<DB::eval()>
533
534This function replaces straight C<eval()> inside the debugger; it simplifies
535the process of evaluating code in the user's context.
536
b570d64b 537The code to be evaluated is passed via the package global variable
69893cff
RGS
538C<$DB::evalarg>; this is done to avoid fiddling with the contents of C<@_>.
539
be9a9b1d
AT
540Before we do the C<eval()>, we preserve the current settings of C<$trace>,
541C<$single>, C<$^D> and C<$usercontext>. The latter contains the
542preserved values of C<$@>, C<$!>, C<$^E>, C<$,>, C<$/>, C<$\>, C<$^W> and the
543user's current package, grabbed when C<DB::DB> got control. This causes the
544proper context to be used when the eval is actually done. Afterward, we
545restore C<$trace>, C<$single>, and C<$^D>.
69893cff
RGS
546
547Next we need to handle C<$@> without getting confused. We save C<$@> in a
b570d64b
SF
548local lexical, localize C<$saved[0]> (which is where C<save()> will put
549C<$@>), and then call C<save()> to capture C<$@>, C<$!>, C<$^E>, C<$,>,
69893cff 550C<$/>, C<$\>, and C<$^W>) and set C<$,>, C<$/>, C<$\>, and C<$^W> to values
b570d64b
SF
551considered sane by the debugger. If there was an C<eval()> error, we print
552it on the debugger's output. If C<$onetimedump> is defined, we call
553C<dumpit> if it's set to 'dump', or C<methods> if it's set to
554'methods'. Setting it to something else causes the debugger to do the eval
555but not print the result - handy if you want to do something else with it
69893cff
RGS
556(the "watch expressions" code does this to get the value of the watch
557expression but not show it unless it matters).
558
b570d64b
SF
559In any case, we then return the list of output from C<eval> to the caller,
560and unwinding restores the former version of C<$@> in C<@saved> as well
69893cff
RGS
561(the localization of C<$saved[0]> goes away at the end of this scope).
562
563=head3 Parameters and variables influencing execution of DB::eval()
564
565C<DB::eval> isn't parameterized in the standard way; this is to keep the
566debugger's calls to C<DB::eval()> from mucking with C<@_>, among other things.
b570d64b 567The variables listed below influence C<DB::eval()>'s execution directly.
69893cff
RGS
568
569=over 4
570
571=item C<$evalarg> - the thing to actually be eval'ed
572
be9a9b1d 573=item C<$trace> - Current state of execution tracing
69893cff 574
be9a9b1d 575=item C<$single> - Current state of single-stepping
69893cff 576
b570d64b 577=item C<$onetimeDump> - what is to be displayed after the evaluation
69893cff
RGS
578
579=item C<$onetimeDumpDepth> - how deep C<dumpit()> should go when dumping results
580
581=back
582
583The following variables are altered by C<DB::eval()> during its execution. They
b570d64b 584are "stacked" via C<local()>, enabling recursive calls to C<DB::eval()>.
69893cff
RGS
585
586=over 4
587
588=item C<@res> - used to capture output from actual C<eval>.
589
590=item C<$otrace> - saved value of C<$trace>.
591
b570d64b 592=item C<$osingle> - saved value of C<$single>.
69893cff
RGS
593
594=item C<$od> - saved value of C<$^D>.
595
596=item C<$saved[0]> - saved value of C<$@>.
597
b570d64b 598=item $\ - for output of C<$@> if there is an evaluation error.
69893cff
RGS
599
600=back
601
602=head3 The problem of lexicals
603
604The context of C<DB::eval()> presents us with some problems. Obviously,
605we want to be 'sandboxed' away from the debugger's internals when we do
606the eval, but we need some way to control how punctuation variables and
b570d64b 607debugger globals are used.
69893cff
RGS
608
609We can't use local, because the code inside C<DB::eval> can see localized
610variables; and we can't use C<my> either for the same reason. The code
611in this routine compromises and uses C<my>.
612
613After this routine is over, we don't have user code executing in the debugger's
614context, so we can use C<my> freely.
615
616=cut
617
618############################################## Begin lexical danger zone
619
620# 'my' variables used here could leak into (that is, be visible in)
621# the context that the code being evaluated is executing in. This means that
622# the code could modify the debugger's variables.
623#
624# Fiddling with the debugger's context could be Bad. We insulate things as
625# much as we can.
626
6b24a4b7
SF
627use vars qw(
628 @args
629 %break_on_load
630 @cmdfhs
631 $CommandSet
632 $CreateTTY
633 $DBGR
634 @dbline
635 $dbline
636 %dbline
637 $dieLevel
6b24a4b7 638 $filename
6b24a4b7
SF
639 $hist
640 $histfile
641 $histsize
6b24a4b7
SF
642 $IN
643 $inhibit_exit
644 @ini_INC
645 $ini_warn
6b24a4b7
SF
646 $maxtrace
647 $od
6b24a4b7 648 $onetimedumpDepth
6b24a4b7
SF
649 @options
650 $osingle
651 $otrace
6b24a4b7
SF
652 $pager
653 $post
654 %postponed
655 $prc
656 $pre
657 $pretype
658 $psh
659 @RememberOnROptions
660 $remoteport
661 @res
662 $rl
663 @saved
6b24a4b7 664 $signalLevel
6b24a4b7 665 $sub
6b24a4b7 666 $term
6b24a4b7
SF
667 $usercontext
668 $warnLevel
6b24a4b7
SF
669);
670
0b83f3d9
SF
671our (
672 $evalarg,
673 $frame,
674 $ImmediateStop,
675 $line,
676 $onetimeDump,
1ce985d2 677 %option,
0b83f3d9 678 $OUT,
1ce985d2 679 $packname,
0b83f3d9
SF
680 $signal,
681 $single,
d1450c23 682 $start,
9d0b71b3
SF
683 %sub,
684 $subname,
0b83f3d9 685 $trace,
d1450c23 686 $window,
18b5b545 687);
931ac036 688
6b24a4b7
SF
689# Used to save @ARGV and extract any debugger-related flags.
690use vars qw(@ARGS);
691
692# Used to prevent multiple entries to diesignal()
693# (if for instance diesignal() itself dies)
694use vars qw($panic);
695
696# Used to prevent the debugger from running nonstop
697# after a restart
ebd0282e 698our ($second_time);
6b24a4b7
SF
699
700sub _calc_usercontext {
701 my ($package) = @_;
702
703 # Cancel strict completely for the evaluated code, so the code
704 # the user evaluates won't be affected by it. (Shlomi Fish)
22fc883d 705 return 'no strict; ($@, $!, $^E, $,, $/, $\, $^W) = @DB::saved;'
6b24a4b7
SF
706 . "package $package;"; # this won't let them modify, alas
707}
708
c1051fcf 709sub eval {
69893cff 710
c1051fcf 711 # 'my' would make it visible from user code
e22ea7cc 712 # but so does local! --tchrist
69893cff 713 # Remember: this localizes @DB::res, not @main::res.
c1051fcf
IZ
714 local @res;
715 {
e22ea7cc
RF
716
717 # Try to keep the user code from messing with us. Save these so that
718 # even if the eval'ed code changes them, we can put them back again.
719 # Needed because the user could refer directly to the debugger's
69893cff
RGS
720 # package globals (and any 'my' variables in this containing scope)
721 # inside the eval(), and we want to try to stay safe.
e22ea7cc 722 local $otrace = $trace;
69893cff
RGS
723 local $osingle = $single;
724 local $od = $^D;
725
726 # Untaint the incoming eval() argument.
727 { ($evalarg) = $evalarg =~ /(.*)/s; }
728
e22ea7cc 729 # $usercontext built in DB::DB near the comment
69893cff
RGS
730 # "set up the context for DB::eval ..."
731 # Evaluate and save any results.
e22ea7cc 732 @res = eval "$usercontext $evalarg;\n"; # '\n' for nice recursive debug
69893cff
RGS
733
734 # Restore those old values.
735 $trace = $otrace;
736 $single = $osingle;
737 $^D = $od;
c1051fcf 738 }
69893cff
RGS
739
740 # Save the current value of $@, and preserve it in the debugger's copy
741 # of the saved precious globals.
c1051fcf 742 my $at = $@;
69893cff
RGS
743
744 # Since we're only saving $@, we only have to localize the array element
745 # that it will be stored in.
e22ea7cc 746 local $saved[0]; # Preserve the old value of $@
7c54f46a 747 eval { DB::save() };
69893cff
RGS
748
749 # Now see whether we need to report an error back to the user.
c1051fcf 750 if ($at) {
69893cff
RGS
751 local $\ = '';
752 print $OUT $at;
753 }
754
755 # Display as required by the caller. $onetimeDump and $onetimedumpDepth
756 # are package globals.
757 elsif ($onetimeDump) {
e22ea7cc
RF
758 if ( $onetimeDump eq 'dump' ) {
759 local $option{dumpDepth} = $onetimedumpDepth
760 if defined $onetimedumpDepth;
761 dumpit( $OUT, \@res );
762 }
763 elsif ( $onetimeDump eq 'methods' ) {
764 methods( $res[0] );
765 }
69893cff 766 } ## end elsif ($onetimeDump)
c1051fcf 767 @res;
69893cff
RGS
768} ## end sub eval
769
770############################################## End lexical danger zone
c1051fcf 771
e22ea7cc
RF
772# After this point it is safe to introduce lexicals.
773# The code being debugged will be executing in its own context, and
69893cff 774# can't see the inside of the debugger.
d338d6fe 775#
e22ea7cc 776# However, one should not overdo it: leave as much control from outside as
69893cff
RGS
777# possible. If you make something a lexical, it's not going to be addressable
778# from outside the debugger even if you know its name.
779
d338d6fe
PP
780# This file is automatically included if you do perl -d.
781# It's probably not useful to include this yourself.
782#
e22ea7cc 783# Before venturing further into these twisty passages, it is
2f7e9187
MS
784# wise to read the perldebguts man page or risk the ire of dragons.
785#
69893cff
RGS
786# (It should be noted that perldebguts will tell you a lot about
787# the underlying mechanics of how the debugger interfaces into the
788# Perl interpreter, but not a lot about the debugger itself. The new
789# comments in this code try to address this problem.)
790
d338d6fe 791# Note that no subroutine call is possible until &DB::sub is defined
36477c24 792# (for subroutines defined outside of the package DB). In fact the same is
d338d6fe 793# true if $deep is not defined.
055fd3a9
GS
794
795# Enhanced by ilya@math.ohio-state.edu (Ilya Zakharevich)
055fd3a9
GS
796
797# modified Perl debugger, to be run from Emacs in perldb-mode
798# Ray Lischner (uunet!mntgfx!lisch) as of 5 Nov 1990
799# Johan Vromans -- upgrade to 4.0 pl 10
800# Ilya Zakharevich -- patches after 5.001 (and some before ;-)
6fae1ad7 801########################################################################
d338d6fe 802
69893cff
RGS
803=head1 DEBUGGER INITIALIZATION
804
805The debugger starts up in phases.
806
807=head2 BASIC SETUP
808
809First, it initializes the environment it wants to run in: turning off
810warnings during its own compilation, defining variables which it will need
811to avoid warnings later, setting itself up to not exit when the program
812terminates, and defaulting to printing return values for the C<r> command.
813
814=cut
815
eda6e075 816# Needed for the statement after exec():
69893cff
RGS
817#
818# This BEGIN block is simply used to switch off warnings during debugger
98dc9551 819# compilation. Probably it would be better practice to fix the warnings,
69893cff 820# but this is how it's done at the moment.
eda6e075 821
e22ea7cc
RF
822BEGIN {
823 $ini_warn = $^W;
824 $^W = 0;
825} # Switch compilation warnings off until another BEGIN.
d12a4851 826
69893cff
RGS
827local ($^W) = 0; # Switch run-time warnings off during init.
828
2cbb2ee1
RGS
829=head2 THREADS SUPPORT
830
831If we are running under a threaded Perl, we require threads and threads::shared
832if the environment variable C<PERL5DB_THREADED> is set, to enable proper
833threaded debugger control. C<-dt> can also be used to set this.
834
835Each new thread will be announced and the debugger prompt will always inform
836you of each new thread created. It will also indicate the thread id in which
837we are currently running within the prompt like this:
838
2dbd01ad 839 [tid] DB<$i>
2cbb2ee1
RGS
840
841Where C<[tid]> is an integer thread id and C<$i> is the familiar debugger
842command prompt. The prompt will show: C<[0]> when running under threads, but
843not actually in a thread. C<[tid]> is consistent with C<gdb> usage.
844
845While running under threads, when you set or delete a breakpoint (etc.), this
b570d64b 846will apply to all threads, not just the currently running one. When you are
2cbb2ee1
RGS
847in a currently executing thread, you will stay there until it completes. With
848the current implementation it is not currently possible to hop from one thread
849to another.
850
851The C<e> and C<E> commands are currently fairly minimal - see C<h e> and C<h E>.
852
853Note that threading support was built into the debugger as of Perl version
854C<5.8.6> and debugger version C<1.2.8>.
855
856=cut
857
858BEGIN {
2dbd01ad
SF
859 # ensure we can share our non-threaded variables or no-op
860 if ($ENV{PERL5DB_THREADED}) {
861 require threads;
862 require threads::shared;
863 import threads::shared qw(share);
864 $DBGR;
865 share(\$DBGR);
866 lock($DBGR);
867 print "Threads support enabled\n";
868 } else {
869 *lock = sub(*) {};
870 *share = sub(*) {};
871 }
2cbb2ee1
RGS
872}
873
2218c045
SF
874# These variables control the execution of 'dumpvar.pl'.
875{
876 package dumpvar;
877 use vars qw(
878 $hashDepth
879 $arrayDepth
880 $dumpDBFiles
881 $dumpPackages
882 $quoteHighBit
883 $printUndef
884 $globPrint
885 $usageOnly
886 );
887}
69893cff 888
2218c045
SF
889# used to control die() reporting in diesignal()
890{
891 package Carp;
892 use vars qw($CarpLevel);
893}
d338d6fe 894
422c59bf 895# without threads, $filename is not defined until DB::DB is called
2cbb2ee1 896foreach my $k (keys (%INC)) {
2dbd01ad 897 share(\$main::{'_<'.$filename}) if defined $filename;
2cbb2ee1
RGS
898};
899
54d04a52 900# Command-line + PERLLIB:
69893cff 901# Save the contents of @INC before they are modified elsewhere.
54d04a52
IZ
902@ini_INC = @INC;
903
69893cff
RGS
904# This was an attempt to clear out the previous values of various
905# trapped errors. Apparently it didn't help. XXX More info needed!
d338d6fe
PP
906# $prevwarn = $prevdie = $prevbus = $prevsegv = ''; # Does not help?!
907
69893cff
RGS
908# We set these variables to safe values. We don't want to blindly turn
909# off warnings, because other packages may still want them.
e22ea7cc
RF
910$trace = $signal = $single = 0; # Uninitialized warning suppression
911 # (local $^W cannot help - other packages!).
69893cff
RGS
912
913# Default to not exiting when program finishes; print the return
914# value when the 'r' command is used to return from a subroutine.
55497cff 915$inhibit_exit = $option{PrintRet} = 1;
d338d6fe 916
6b24a4b7
SF
917use vars qw($trace_to_depth);
918
5e2b42dd
SF
919# Default to 1E9 so it won't be limited to a certain recursion depth.
920$trace_to_depth = 1E9;
bdba49ad 921
69893cff
RGS
922=head1 OPTION PROCESSING
923
b570d64b
SF
924The debugger's options are actually spread out over the debugger itself and
925C<dumpvar.pl>; some of these are variables to be set, while others are
69893cff
RGS
926subs to be called with a value. To try to make this a little easier to
927manage, the debugger uses a few data structures to define what options
928are legal and how they are to be processed.
929
930First, the C<@options> array defines the I<names> of all the options that
931are to be accepted.
932
933=cut
934
935@options = qw(
5561b870 936 CommandSet HistFile HistSize
e22ea7cc
RF
937 hashDepth arrayDepth dumpDepth
938 DumpDBFiles DumpPackages DumpReused
939 compactDump veryCompact quote
940 HighBit undefPrint globPrint
941 PrintRet UsageOnly frame
942 AutoTrace TTY noTTY
943 ReadLine NonStop LineInfo
944 maxTraceLen recallCommand ShellBang
945 pager tkRunning ornaments
946 signalLevel warnLevel dieLevel
947 inhibit_exit ImmediateStop bareStringify
948 CreateTTY RemotePort windowSize
584420f0 949 DollarCaretP
e22ea7cc 950);
d12a4851 951
584420f0 952@RememberOnROptions = qw(DollarCaretP);
d12a4851 953
69893cff
RGS
954=pod
955
956Second, C<optionVars> lists the variables that each option uses to save its
957state.
958
959=cut
960
6b24a4b7
SF
961use vars qw(%optionVars);
962
69893cff 963%optionVars = (
e22ea7cc
RF
964 hashDepth => \$dumpvar::hashDepth,
965 arrayDepth => \$dumpvar::arrayDepth,
966 CommandSet => \$CommandSet,
967 DumpDBFiles => \$dumpvar::dumpDBFiles,
968 DumpPackages => \$dumpvar::dumpPackages,
969 DumpReused => \$dumpvar::dumpReused,
970 HighBit => \$dumpvar::quoteHighBit,
971 undefPrint => \$dumpvar::printUndef,
972 globPrint => \$dumpvar::globPrint,
973 UsageOnly => \$dumpvar::usageOnly,
974 CreateTTY => \$CreateTTY,
975 bareStringify => \$dumpvar::bareStringify,
976 frame => \$frame,
977 AutoTrace => \$trace,
978 inhibit_exit => \$inhibit_exit,
979 maxTraceLen => \$maxtrace,
980 ImmediateStop => \$ImmediateStop,
981 RemotePort => \$remoteport,
982 windowSize => \$window,
5561b870
AK
983 HistFile => \$histfile,
984 HistSize => \$histsize,
69893cff
RGS
985);
986
987=pod
988
989Third, C<%optionAction> defines the subroutine to be called to process each
990option.
991
b570d64b 992=cut
69893cff 993
6b24a4b7
SF
994use vars qw(%optionAction);
995
69893cff
RGS
996%optionAction = (
997 compactDump => \&dumpvar::compactDump,
998 veryCompact => \&dumpvar::veryCompact,
999 quote => \&dumpvar::quote,
1000 TTY => \&TTY,
1001 noTTY => \&noTTY,
1002 ReadLine => \&ReadLine,
1003 NonStop => \&NonStop,
1004 LineInfo => \&LineInfo,
1005 recallCommand => \&recallCommand,
1006 ShellBang => \&shellBang,
1007 pager => \&pager,
1008 signalLevel => \&signalLevel,
1009 warnLevel => \&warnLevel,
1010 dieLevel => \&dieLevel,
1011 tkRunning => \&tkRunning,
1012 ornaments => \&ornaments,
1013 RemotePort => \&RemotePort,
1014 DollarCaretP => \&DollarCaretP,
d12a4851
JH
1015);
1016
69893cff
RGS
1017=pod
1018
1019Last, the C<%optionRequire> notes modules that must be C<require>d if an
1020option is used.
1021
1022=cut
d338d6fe 1023
69893cff
RGS
1024# Note that this list is not complete: several options not listed here
1025# actually require that dumpvar.pl be loaded for them to work, but are
1026# not in the table. A subsequent patch will correct this problem; for
1027# the moment, we're just recommenting, and we are NOT going to change
1028# function.
6b24a4b7
SF
1029use vars qw(%optionRequire);
1030
eda6e075 1031%optionRequire = (
69893cff
RGS
1032 compactDump => 'dumpvar.pl',
1033 veryCompact => 'dumpvar.pl',
1034 quote => 'dumpvar.pl',
e22ea7cc 1035);
69893cff
RGS
1036
1037=pod
1038
1039There are a number of initialization-related variables which can be set
1040by putting code to set them in a BEGIN block in the C<PERL5DB> environment
1041variable. These are:
1042
1043=over 4
1044
1045=item C<$rl> - readline control XXX needs more explanation
1046
1047=item C<$warnLevel> - whether or not debugger takes over warning handling
1048
1049=item C<$dieLevel> - whether or not debugger takes over die handling
1050
1051=item C<$signalLevel> - whether or not debugger takes over signal handling
1052
1053=item C<$pre> - preprompt actions (array reference)
1054
1055=item C<$post> - postprompt actions (array reference)
1056
1057=item C<$pretype>
1058
1059=item C<$CreateTTY> - whether or not to create a new TTY for this debugger
1060
1061=item C<$CommandSet> - which command set to use (defaults to new, documented set)
1062
1063=back
1064
1065=cut
d338d6fe
PP
1066
1067# These guys may be defined in $ENV{PERL5DB} :
69893cff
RGS
1068$rl = 1 unless defined $rl;
1069$warnLevel = 1 unless defined $warnLevel;
1070$dieLevel = 1 unless defined $dieLevel;
1071$signalLevel = 1 unless defined $signalLevel;
1072$pre = [] unless defined $pre;
1073$post = [] unless defined $post;
1074$pretype = [] unless defined $pretype;
1075$CreateTTY = 3 unless defined $CreateTTY;
1076$CommandSet = '580' unless defined $CommandSet;
1077
2cbb2ee1
RGS
1078share($rl);
1079share($warnLevel);
1080share($dieLevel);
1081share($signalLevel);
1082share($pre);
1083share($post);
1084share($pretype);
1085share($rl);
1086share($CreateTTY);
1087share($CommandSet);
1088
69893cff
RGS
1089=pod
1090
1091The default C<die>, C<warn>, and C<signal> handlers are set up.
1092
1093=cut
055fd3a9 1094
d338d6fe
PP
1095warnLevel($warnLevel);
1096dieLevel($dieLevel);
1097signalLevel($signalLevel);
055fd3a9 1098
69893cff
RGS
1099=pod
1100
1101The pager to be used is needed next. We try to get it from the
5561b870 1102environment first. If it's not defined there, we try to find it in
69893cff
RGS
1103the Perl C<Config.pm>. If it's not there, we default to C<more>. We
1104then call the C<pager()> function to save the pager name.
1105
1106=cut
1107
1108# This routine makes sure $pager is set up so that '|' can use it.
4865a36d 1109pager(
e22ea7cc 1110
69893cff 1111 # If PAGER is defined in the environment, use it.
e22ea7cc
RF
1112 defined $ENV{PAGER}
1113 ? $ENV{PAGER}
69893cff
RGS
1114
1115 # If not, see if Config.pm defines it.
e22ea7cc
RF
1116 : eval { require Config }
1117 && defined $Config::Config{pager}
1118 ? $Config::Config{pager}
69893cff
RGS
1119
1120 # If not, fall back to 'more'.
e22ea7cc
RF
1121 : 'more'
1122 )
1123 unless defined $pager;
69893cff
RGS
1124
1125=pod
1126
1127We set up the command to be used to access the man pages, the command
be9a9b1d
AT
1128recall character (C<!> unless otherwise defined) and the shell escape
1129character (C<!> unless otherwise defined). Yes, these do conflict, and
69893cff
RGS
1130neither works in the debugger at the moment.
1131
1132=cut
1133
055fd3a9 1134setman();
69893cff
RGS
1135
1136# Set up defaults for command recall and shell escape (note:
1137# these currently don't work in linemode debugging).
2218c045
SF
1138recallCommand("!") unless defined $prc;
1139shellBang("!") unless defined $psh;
69893cff
RGS
1140
1141=pod
1142
1143We then set up the gigantic string containing the debugger help.
1144We also set the limit on the number of arguments we'll display during a
1145trace.
1146
1147=cut
1148
04e43a21 1149sethelp();
69893cff
RGS
1150
1151# If we didn't get a default for the length of eval/stack trace args,
1152# set it here.
1d06cb2d 1153$maxtrace = 400 unless defined $maxtrace;
69893cff
RGS
1154
1155=head2 SETTING UP THE DEBUGGER GREETING
1156
be9a9b1d 1157The debugger I<greeting> helps to inform the user how many debuggers are
69893cff
RGS
1158running, and whether the current debugger is the primary or a child.
1159
1160If we are the primary, we just hang onto our pid so we'll have it when
1161or if we start a child debugger. If we are a child, we'll set things up
1162so we'll have a unique greeting and so the parent will give us our own
1163TTY later.
1164
1165We save the current contents of the C<PERLDB_PIDS> environment variable
1166because we mess around with it. We'll also need to hang onto it because
1167we'll need it if we restart.
1168
1169Child debuggers make a label out of the current PID structure recorded in
1170PERLDB_PIDS plus the new PID. They also mark themselves as not having a TTY
1171yet so the parent will give them one later via C<resetterm()>.
1172
1173=cut
1174
e22ea7cc 1175# Save the current contents of the environment; we're about to
69893cff 1176# much with it. We'll need this if we have to restart.
6b24a4b7 1177use vars qw($ini_pids);
f1583d8f 1178$ini_pids = $ENV{PERLDB_PIDS};
69893cff 1179
6b24a4b7
SF
1180use vars qw ($pids $term_pid);
1181
e22ea7cc
RF
1182if ( defined $ENV{PERLDB_PIDS} ) {
1183
69893cff 1184 # We're a child. Make us a label out of the current PID structure
e22ea7cc 1185 # recorded in PERLDB_PIDS plus our (new) PID. Mark us as not having
69893cff 1186 # a term yet so the parent will give us one later via resetterm().
55f4245e
JM
1187
1188 my $env_pids = $ENV{PERLDB_PIDS};
1189 $pids = "[$env_pids]";
1190
1191 # Unless we are on OpenVMS, all programs under the DCL shell run under
1192 # the same PID.
1193
1194 if (($^O eq 'VMS') && ($env_pids =~ /\b$$\b/)) {
1195 $term_pid = $$;
1196 }
1197 else {
1198 $ENV{PERLDB_PIDS} .= "->$$";
1199 $term_pid = -1;
1200 }
1201
69893cff
RGS
1202} ## end if (defined $ENV{PERLDB_PIDS...
1203else {
e22ea7cc
RF
1204
1205 # We're the parent PID. Initialize PERLDB_PID in case we end up with a
69893cff
RGS
1206 # child debugger, and mark us as the parent, so we'll know to set up
1207 # more TTY's is we have to.
1208 $ENV{PERLDB_PIDS} = "$$";
619a0444 1209 $pids = "[pid=$$]";
e22ea7cc 1210 $term_pid = $$;
f1583d8f 1211}
69893cff 1212
6b24a4b7 1213use vars qw($pidprompt);
f1583d8f 1214$pidprompt = '';
69893cff
RGS
1215
1216# Sets up $emacs as a synonym for $slave_editor.
7793e5c2 1217our ($slave_editor);
69893cff
RGS
1218*emacs = $slave_editor if $slave_editor; # May be used in afterinit()...
1219
1220=head2 READING THE RC FILE
1221
b570d64b 1222The debugger will read a file of initialization options if supplied. If
69893cff
RGS
1223running interactively, this is C<.perldb>; if not, it's C<perldb.ini>.
1224
b570d64b 1225=cut
69893cff
RGS
1226
1227# As noted, this test really doesn't check accurately that the debugger
1228# is running at a terminal or not.
d338d6fe 1229
6b24a4b7 1230use vars qw($rcfile);
fb4d8a6c
SF
1231{
1232 my $dev_tty = (($^O eq 'VMS') ? 'TT:' : '/dev/tty');
1233 # this is the wrong metric!
1234 $rcfile = ((-e $dev_tty) ? ".perldb" : "perldb.ini");
d338d6fe
PP
1235}
1236
69893cff
RGS
1237=pod
1238
1239The debugger does a safety test of the file to be read. It must be owned
1240either by the current user or root, and must only be writable by the owner.
1241
1242=cut
1243
1244# This wraps a safety test around "do" to read and evaluate the init file.
1245#
055fd3a9
GS
1246# This isn't really safe, because there's a race
1247# between checking and opening. The solution is to
1248# open and fstat the handle, but then you have to read and
1249# eval the contents. But then the silly thing gets
69893cff
RGS
1250# your lexical scope, which is unfortunate at best.
1251sub safe_do {
055fd3a9
GS
1252 my $file = shift;
1253
1254 # Just exactly what part of the word "CORE::" don't you understand?
69893cff
RGS
1255 local $SIG{__WARN__};
1256 local $SIG{__DIE__};
055fd3a9 1257
e22ea7cc 1258 unless ( is_safe_file($file) ) {
69893cff 1259 CORE::warn <<EO_GRIPE;
055fd3a9 1260perldb: Must not source insecure rcfile $file.
b570d64b 1261 You or the superuser must be the owner, and it must not
69893cff 1262 be writable by anyone but its owner.
055fd3a9 1263EO_GRIPE
69893cff
RGS
1264 return;
1265 } ## end unless (is_safe_file($file...
055fd3a9
GS
1266
1267 do $file;
1268 CORE::warn("perldb: couldn't parse $file: $@") if $@;
69893cff 1269} ## end sub safe_do
055fd3a9 1270
69893cff
RGS
1271# This is the safety test itself.
1272#
055fd3a9
GS
1273# Verifies that owner is either real user or superuser and that no
1274# one but owner may write to it. This function is of limited use
1275# when called on a path instead of upon a handle, because there are
1276# no guarantees that filename (by dirent) whose file (by ino) is
e22ea7cc 1277# eventually accessed is the same as the one tested.
055fd3a9
GS
1278# Assumes that the file's existence is not in doubt.
1279sub is_safe_file {
1280 my $path = shift;
69893cff 1281 stat($path) || return; # mysteriously vaporized
e22ea7cc 1282 my ( $dev, $ino, $mode, $nlink, $uid, $gid ) = stat(_);
055fd3a9
GS
1283
1284 return 0 if $uid != 0 && $uid != $<;
1285 return 0 if $mode & 022;
1286 return 1;
69893cff 1287} ## end sub is_safe_file
055fd3a9 1288
69893cff 1289# If the rcfile (whichever one we decided was the right one to read)
e22ea7cc
RF
1290# exists, we safely do it.
1291if ( -f $rcfile ) {
055fd3a9 1292 safe_do("./$rcfile");
69893cff 1293}
e22ea7cc 1294
69893cff 1295# If there isn't one here, try the user's home directory.
e22ea7cc 1296elsif ( defined $ENV{HOME} && -f "$ENV{HOME}/$rcfile" ) {
055fd3a9
GS
1297 safe_do("$ENV{HOME}/$rcfile");
1298}
e22ea7cc 1299
69893cff 1300# Else try the login directory.
e22ea7cc 1301elsif ( defined $ENV{LOGDIR} && -f "$ENV{LOGDIR}/$rcfile" ) {
055fd3a9 1302 safe_do("$ENV{LOGDIR}/$rcfile");
d338d6fe
PP
1303}
1304
69893cff 1305# If the PERLDB_OPTS variable has options in it, parse those out next.
e22ea7cc
RF
1306if ( defined $ENV{PERLDB_OPTS} ) {
1307 parse_options( $ENV{PERLDB_OPTS} );
d338d6fe
PP
1308}
1309
69893cff
RGS
1310=pod
1311
1312The last thing we do during initialization is determine which subroutine is
1313to be used to obtain a new terminal when a new debugger is started. Right now,
b0b54b5e 1314the debugger only handles TCP sockets, X11, OS/2, amd Mac OS X
11653f7f 1315(darwin).
69893cff
RGS
1316
1317=cut
1318
1319# Set up the get_fork_TTY subroutine to be aliased to the proper routine.
1320# Works if you're running an xterm or xterm-like window, or you're on
6fae1ad7
RF
1321# OS/2, or on Mac OS X. This may need some expansion.
1322
1323if (not defined &get_fork_TTY) # only if no routine exists
69893cff 1324{
b570d64b 1325 if ( defined $remoteport ) {
11653f7f
JJ
1326 # Expect an inetd-like server
1327 *get_fork_TTY = \&socket_get_fork_TTY; # to listen to us
1328 }
1329 elsif (defined $ENV{TERM} # If we know what kind
6fae1ad7
RF
1330 # of terminal this is,
1331 and $ENV{TERM} eq 'xterm' # and it's an xterm,
1332 and defined $ENV{DISPLAY} # and what display it's on,
1333 )
1334 {
1335 *get_fork_TTY = \&xterm_get_fork_TTY; # use the xterm version
1336 }
1337 elsif ( $^O eq 'os2' ) { # If this is OS/2,
1338 *get_fork_TTY = \&os2_get_fork_TTY; # use the OS/2 version
1339 }
1340 elsif ( $^O eq 'darwin' # If this is Mac OS X
1341 and defined $ENV{TERM_PROGRAM} # and we're running inside
1342 and $ENV{TERM_PROGRAM}
1343 eq 'Apple_Terminal' # Terminal.app
1344 )
1345 {
1346 *get_fork_TTY = \&macosx_get_fork_TTY; # use the Mac OS X version
1347 }
69893cff 1348} ## end if (not defined &get_fork_TTY...
e22ea7cc 1349
dbb46cec
DQ
1350# untaint $^O, which may have been tainted by the last statement.
1351# see bug [perl #24674]
e22ea7cc
RF
1352$^O =~ m/^(.*)\z/;
1353$^O = $1;
f1583d8f 1354
d12a4851 1355# Here begin the unreadable code. It needs fixing.
055fd3a9 1356
69893cff
RGS
1357=head2 RESTART PROCESSING
1358
1359This section handles the restart command. When the C<R> command is invoked, it
1360tries to capture all of the state it can into environment variables, and
1361then sets C<PERLDB_RESTART>. When we start executing again, we check to see
1362if C<PERLDB_RESTART> is there; if so, we reload all the information that
1363the R command stuffed into the environment variables.
1364
b570d64b 1365 PERLDB_RESTART - flag only, contains no restart data itself.
69893cff
RGS
1366 PERLDB_HIST - command history, if it's available
1367 PERLDB_ON_LOAD - breakpoints set by the rc file
1368 PERLDB_POSTPONE - subs that have been loaded/not executed, and have actions
1369 PERLDB_VISITED - files that had breakpoints
1370 PERLDB_FILE_... - breakpoints for a file
1371 PERLDB_OPT - active options
1372 PERLDB_INC - the original @INC
1373 PERLDB_PRETYPE - preprompt debugger actions
1374 PERLDB_PRE - preprompt Perl code
1375 PERLDB_POST - post-prompt Perl code
1376 PERLDB_TYPEAHEAD - typeahead captured by readline()
1377
1378We chug through all these variables and plug the values saved in them
1379back into the appropriate spots in the debugger.
1380
1381=cut
1382
6b24a4b7
SF
1383use vars qw(@hist @truehist %postponed_file @typeahead);
1384
fb0fb5f4
SF
1385sub _restore_shared_globals_after_restart
1386{
1387 @hist = get_list('PERLDB_HIST');
1388 %break_on_load = get_list("PERLDB_ON_LOAD");
1389 %postponed = get_list("PERLDB_POSTPONE");
1390
1391 share(@hist);
1392 share(@truehist);
1393 share(%break_on_load);
1394 share(%postponed);
1395}
1396
e18a02a6 1397sub _restore_breakpoints_and_actions {
e22ea7cc 1398
e22ea7cc 1399 my @had_breakpoints = get_list("PERLDB_VISITED");
e18a02a6 1400
bdba49ad
SF
1401 for my $file_idx ( 0 .. $#had_breakpoints ) {
1402 my $filename = $had_breakpoints[$file_idx];
1403 my %pf = get_list("PERLDB_FILE_$file_idx");
1404 $postponed_file{ $filename } = \%pf if %pf;
1405 my @lines = sort {$a <=> $b} keys(%pf);
1406 my @enabled_statuses = get_list("PERLDB_FILE_ENABLED_$file_idx");
1407 for my $line_idx (0 .. $#lines) {
1408 _set_breakpoint_enabled_status(
1409 $filename,
1410 $lines[$line_idx],
1411 ($enabled_statuses[$line_idx] ? 1 : ''),
1412 );
1413 }
e22ea7cc 1414 }
69893cff 1415
e18a02a6
SF
1416 return;
1417}
1418
ca50076b
SF
1419sub _restore_options_after_restart
1420{
1421 my %options_map = get_list("PERLDB_OPT");
1422
1423 while ( my ( $opt, $val ) = each %options_map ) {
1424 $val =~ s/[\\\']/\\$1/g;
1425 parse_options("$opt'$val'");
1426 }
1427
1428 return;
1429}
1430
18580168
SF
1431sub _restore_globals_after_restart
1432{
1433 # restore original @INC
1434 @INC = get_list("PERLDB_INC");
1435 @ini_INC = @INC;
1436
1437 # return pre/postprompt actions and typeahead buffer
1438 $pretype = [ get_list("PERLDB_PRETYPE") ];
1439 $pre = [ get_list("PERLDB_PRE") ];
1440 $post = [ get_list("PERLDB_POST") ];
1441 @typeahead = get_list( "PERLDB_TYPEAHEAD", @typeahead );
1442
1443 return;
1444}
1445
fb0fb5f4 1446
e18a02a6
SF
1447if ( exists $ENV{PERLDB_RESTART} ) {
1448
1449 # We're restarting, so we don't need the flag that says to restart anymore.
1450 delete $ENV{PERLDB_RESTART};
1451
1452 # $restart = 1;
fb0fb5f4 1453 _restore_shared_globals_after_restart();
e18a02a6
SF
1454
1455 _restore_breakpoints_and_actions();
1456
69893cff 1457 # restore options
ca50076b 1458 _restore_options_after_restart();
69893cff 1459
18580168 1460 _restore_globals_after_restart();
69893cff
RGS
1461} ## end if (exists $ENV{PERLDB_RESTART...
1462
1463=head2 SETTING UP THE TERMINAL
1464
1465Now, we'll decide how the debugger is going to interact with the user.
1466If there's no TTY, we set the debugger to run non-stop; there's not going
1467to be anyone there to enter commands.
1468
1469=cut
54d04a52 1470
ebd0282e 1471use vars qw($notty $console $tty $LINEINFO);
6b24a4b7
SF
1472use vars qw($lineinfo $doccmd);
1473
ebd0282e
SF
1474our ($runnonstop);
1475
d338d6fe 1476if ($notty) {
69893cff 1477 $runnonstop = 1;
2dbd01ad 1478 share($runnonstop);
69893cff 1479}
d12a4851 1480
69893cff
RGS
1481=pod
1482
1483If there is a TTY, we have to determine who it belongs to before we can
1484proceed. If this is a slave editor or graphical debugger (denoted by
1485the first command-line switch being '-emacs'), we shift this off and
1486set C<$rl> to 0 (XXX ostensibly to do straight reads).
1487
1488=cut
1489
1490else {
e22ea7cc 1491
69893cff
RGS
1492 # Is Perl being run from a slave editor or graphical debugger?
1493 # If so, don't use readline, and set $slave_editor = 1.
2b0b9dd1
SF
1494 if ($slave_editor = ( @main::ARGV && ( $main::ARGV[0] eq '-emacs' ) )) {
1495 $rl = 0;
1496 shift(@main::ARGV);
1497 }
e22ea7cc
RF
1498
1499 #require Term::ReadLine;
d12a4851 1500
69893cff
RGS
1501=pod
1502
1503We then determine what the console should be on various systems:
1504
1505=over 4
1506
1507=item * Cygwin - We use C<stdin> instead of a separate device.
1508
1509=cut
1510
e22ea7cc
RF
1511 if ( $^O eq 'cygwin' ) {
1512
69893cff
RGS
1513 # /dev/tty is binary. use stdin for textmode
1514 undef $console;
1515 }
1516
1517=item * Unix - use C</dev/tty>.
1518
1519=cut
1520
e22ea7cc 1521 elsif ( -e "/dev/tty" ) {
69893cff
RGS
1522 $console = "/dev/tty";
1523 }
1524
1525=item * Windows or MSDOS - use C<con>.
1526
1527=cut
1528
e22ea7cc 1529 elsif ( $^O eq 'dos' or -e "con" or $^O eq 'MSWin32' ) {
69893cff
RGS
1530 $console = "con";
1531 }
1532
69893cff
RGS
1533=item * VMS - use C<sys$command>.
1534
1535=cut
1536
1537 else {
e22ea7cc 1538
69893cff
RGS
1539 # everything else is ...
1540 $console = "sys\$command";
d12a4851 1541 }
69893cff
RGS
1542
1543=pod
1544
1545=back
1546
1547Several other systems don't use a specific console. We C<undef $console>
1548for those (Windows using a slave editor/graphical debugger, NetWare, OS/2
1549with a slave editor, Epoc).
1550
1551=cut
d12a4851 1552
e22ea7cc
RF
1553 if ( ( $^O eq 'MSWin32' ) and ( $slave_editor or defined $ENV{EMACS} ) ) {
1554
69893cff 1555 # /dev/tty is binary. use stdin for textmode
e22ea7cc
RF
1556 $console = undef;
1557 }
1558
1559 if ( $^O eq 'NetWare' ) {
d12a4851 1560
69893cff
RGS
1561 # /dev/tty is binary. use stdin for textmode
1562 $console = undef;
1563 }
d12a4851 1564
69893cff
RGS
1565 # In OS/2, we need to use STDIN to get textmode too, even though
1566 # it pretty much looks like Unix otherwise.
e22ea7cc
RF
1567 if ( defined $ENV{OS2_SHELL} and ( $slave_editor or $ENV{WINDOWID} ) )
1568 { # In OS/2
1569 $console = undef;
1570 }
1571
1572 # EPOC also falls into the 'got to use STDIN' camp.
1573 if ( $^O eq 'epoc' ) {
1574 $console = undef;
1575 }
d12a4851 1576
69893cff
RGS
1577=pod
1578
1579If there is a TTY hanging around from a parent, we use that as the console.
1580
1581=cut
1582
e22ea7cc 1583 $console = $tty if defined $tty;
d12a4851 1584
b570d64b 1585=head2 SOCKET HANDLING
69893cff
RGS
1586
1587The debugger is capable of opening a socket and carrying out a debugging
1588session over the socket.
1589
1590If C<RemotePort> was defined in the options, the debugger assumes that it
1591should try to start a debugging session on that port. It builds the socket
1592and then tries to connect the input and output filehandles to it.
1593
1594=cut
1595
1596 # Handle socket stuff.
e22ea7cc
RF
1597
1598 if ( defined $remoteport ) {
1599
69893cff
RGS
1600 # If RemotePort was defined in the options, connect input and output
1601 # to the socket.
11653f7f 1602 $IN = $OUT = connect_remoteport();
69893cff
RGS
1603 } ## end if (defined $remoteport)
1604
1605=pod
1606
1607If no C<RemotePort> was defined, and we want to create a TTY on startup,
1608this is probably a situation where multiple debuggers are running (for example,
1609a backticked command that starts up another debugger). We create a new IN and
1610OUT filehandle, and do the necessary mojo to create a new TTY if we know how
1611and if we can.
1612
1613=cut
1614
1615 # Non-socket.
1616 else {
e22ea7cc 1617
69893cff
RGS
1618 # Two debuggers running (probably a system or a backtick that invokes
1619 # the debugger itself under the running one). create a new IN and OUT
e22ea7cc 1620 # filehandle, and do the necessary mojo to create a new tty if we
69893cff 1621 # know how, and we can.
e22ea7cc
RF
1622 create_IN_OUT(4) if $CreateTTY & 4;
1623 if ($console) {
1624
69893cff 1625 # If we have a console, check to see if there are separate ins and
cd1191f1 1626 # outs to open. (They are assumed identical if not.)
69893cff 1627
e22ea7cc
RF
1628 my ( $i, $o ) = split /,/, $console;
1629 $o = $i unless defined $o;
69893cff 1630
69893cff 1631 # read/write on in, or just read, or read on STDIN.
e22ea7cc
RF
1632 open( IN, "+<$i" )
1633 || open( IN, "<$i" )
1634 || open( IN, "<&STDIN" );
1635
69893cff
RGS
1636 # read/write/create/clobber out, or write/create/clobber out,
1637 # or merge with STDERR, or merge with STDOUT.
e22ea7cc
RF
1638 open( OUT, "+>$o" )
1639 || open( OUT, ">$o" )
1640 || open( OUT, ">&STDERR" )
1641 || open( OUT, ">&STDOUT" ); # so we don't dongle stdout
1642
1643 } ## end if ($console)
1644 elsif ( not defined $console ) {
1645
1646 # No console. Open STDIN.
1647 open( IN, "<&STDIN" );
1648
1649 # merge with STDERR, or with STDOUT.
1650 open( OUT, ">&STDERR" )
1651 || open( OUT, ">&STDOUT" ); # so we don't dongle stdout
1652 $console = 'STDIN/OUT';
69893cff
RGS
1653 } ## end elsif (not defined $console)
1654
1655 # Keep copies of the filehandles so that when the pager runs, it
1656 # can close standard input without clobbering ours.
2b0b9dd1
SF
1657 if ($console or (not defined($console))) {
1658 $IN = \*IN;
1659 $OUT = \*OUT;
1660 }
e22ea7cc
RF
1661 } ## end elsif (from if(defined $remoteport))
1662
1663 # Unbuffer DB::OUT. We need to see responses right away.
70c9432b 1664 $OUT->autoflush(1);
e22ea7cc
RF
1665
1666 # Line info goes to debugger output unless pointed elsewhere.
1667 # Pointing elsewhere makes it possible for slave editors to
1668 # keep track of file and position. We have both a filehandle
1669 # and a I/O description to keep track of.
1670 $LINEINFO = $OUT unless defined $LINEINFO;
1671 $lineinfo = $console unless defined $lineinfo;
2dbd01ad
SF
1672 # share($LINEINFO); # <- unable to share globs
1673 share($lineinfo); #
e22ea7cc 1674
69893cff
RGS
1675=pod
1676
1677To finish initialization, we show the debugger greeting,
1678and then call the C<afterinit()> subroutine if there is one.
1679
1680=cut
d12a4851 1681
e22ea7cc
RF
1682 # Show the debugger greeting.
1683 $header =~ s/.Header: ([^,]+),v(\s+\S+\s+\S+).*$/$1$2/;
1684 unless ($runnonstop) {
1685 local $\ = '';
1686 local $, = '';
1687 if ( $term_pid eq '-1' ) {
1688 print $OUT "\nDaughter DB session started...\n";
1689 }
1690 else {
1691 print $OUT "\nLoading DB routines from $header\n";
1692 print $OUT (
1693 "Editor support ",
1694 $slave_editor ? "enabled" : "available", ".\n"
1695 );
1696 print $OUT
1f874cb6 1697"\nEnter h or 'h h' for help, or '$doccmd perldebug' for more help.\n\n";
69893cff
RGS
1698 } ## end else [ if ($term_pid eq '-1')
1699 } ## end unless ($runnonstop)
1700} ## end else [ if ($notty)
1701
1702# XXX This looks like a bug to me.
1703# Why copy to @ARGS and then futz with @args?
d338d6fe 1704@ARGS = @ARGV;
6b24a4b7 1705# for (@args) {
69893cff
RGS
1706 # Make sure backslashes before single quotes are stripped out, and
1707 # keep args unless they are numeric (XXX why?)
e22ea7cc
RF
1708 # s/\'/\\\'/g; # removed while not justified understandably
1709 # s/(.*)/'$1'/ unless /^-?[\d.]+$/; # ditto
6b24a4b7 1710# }
d338d6fe 1711
e22ea7cc 1712# If there was an afterinit() sub defined, call it. It will get
69893cff 1713# executed in our scope, so it can fiddle with debugger globals.
e22ea7cc 1714if ( defined &afterinit ) { # May be defined in $rcfile
2b0b9dd1 1715 afterinit();
d338d6fe 1716}
e22ea7cc 1717
69893cff 1718# Inform us about "Stack dump during die enabled ..." in dieLevel().
6b24a4b7
SF
1719use vars qw($I_m_init);
1720
43aed9ee
IZ
1721$I_m_init = 1;
1722
d338d6fe
PP
1723############################################################ Subroutines
1724
69893cff
RGS
1725=head1 SUBROUTINES
1726
1727=head2 DB
1728
1729This gigantic subroutine is the heart of the debugger. Called before every
1730statement, its job is to determine if a breakpoint has been reached, and
1731stop if so; read commands from the user, parse them, and execute
b468dcb6 1732them, and then send execution off to the next statement.
69893cff
RGS
1733
1734Note that the order in which the commands are processed is very important;
1735some commands earlier in the loop will actually alter the C<$cmd> variable
be9a9b1d 1736to create other commands to be executed later. This is all highly I<optimized>
69893cff
RGS
1737but can be confusing. Check the comments for each C<$cmd ... && do {}> to
1738see what's happening in any given command.
1739
1740=cut
1741
6b24a4b7
SF
1742use vars qw(
1743 $action
1744 %alias
1745 $cmd
6b24a4b7
SF
1746 $fall_off_end
1747 $file
1748 $filename_ini
1749 $finished
1750 %had_breakpoints
6b24a4b7
SF
1751 $level
1752 $max
6b24a4b7
SF
1753 $package
1754 $rc
1755 $sh
6b24a4b7 1756 $try
2c247e84 1757 $end
6b24a4b7
SF
1758);
1759
1ce985d2
SF
1760our (
1761 $doret,
d1450c23 1762 $incr,
73c5e526 1763 $laststep,
1ce985d2
SF
1764 $stack_depth,
1765 @stack,
1766 @to_watch,
1767 @old_watch,
1768);
8ad70697 1769
6791e41b
SF
1770sub _DB__determine_if_we_should_break
1771{
1772 # if we have something here, see if we should break.
1773 # $stop is lexical and local to this block - $action on the other hand
1774 # is global.
1775 my $stop;
1776
1777 if ( $dbline{$line}
1778 && _is_breakpoint_enabled($filename, $line)
1779 && (( $stop, $action ) = split( /\0/, $dbline{$line} ) ) )
1780 {
1781
1782 # Stop if the stop criterion says to just stop.
1783 if ( $stop eq '1' ) {
1784 $signal |= 1;
1785 }
1786
1787 # It's a conditional stop; eval it in the user's context and
1788 # see if we should stop. If so, remove the one-time sigil.
1789 elsif ($stop) {
1790 $evalarg = "\$DB::signal |= 1 if do {$stop}";
1791 &eval;
1792 # If the breakpoint is temporary, then delete its enabled status.
1793 if ($dbline{$line} =~ s/;9($|\0)/$1/) {
1794 _cancel_breakpoint_temp_enabled_status($filename, $line);
1795 }
1796 }
1797 } ## end if ($dbline{$line} && ...
1798}
1799
8481f647
SF
1800sub _DB__is_finished {
1801 if ($finished and $level <= 1) {
1802 end_report();
1803 return 1;
1804 }
1805 else {
1806 return;
1807 }
1808}
1809
32bbadc6
SF
1810sub _DB__read_next_cmd
1811{
1812 my ($tid) = @_;
1813
1814 # We have a terminal, or can get one ...
1815 if (!$term) {
1816 setterm();
1817 }
1818
1819 # ... and it belogs to this PID or we get one for this PID ...
1820 if ($term_pid != $$) {
1821 resetterm(1);
1822 }
1823
1824 # ... and we got a line of command input ...
1825 $cmd = DB::readline(
1826 "$pidprompt $tid DB"
1827 . ( '<' x $level )
1828 . ( $#hist + 1 )
1829 . ( '>' x $level ) . " "
1830 );
1831
1832 return defined($cmd);
1833}
1834
7013f40c
SF
1835sub _DB__trim_command_and_return_first_component {
1836 $cmd =~ s/\A\s+//s; # trim annoying leading whitespace
1837 $cmd =~ s/\s+\z//s; # trim annoying trailing whitespace
1838
1839 $cmd =~ m{\A(\S*)};
1840 return $1;
1841}
1842
2a802473
SF
1843sub _DB__handle_f_command {
1844 if (($file) = $cmd =~ /\Af\b\s*(.*)/) {
1845 $file =~ s/\s+$//;
1846
1847 # help for no arguments (old-style was return from sub).
1848 if ( !$file ) {
1849 print $OUT
1850 "The old f command is now the r command.\n"; # hint
1851 print $OUT "The new f command switches filenames.\n";
1852 next CMD;
1853 } ## end if (!$file)
1854
1855 # if not in magic file list, try a close match.
1856 if ( !defined $main::{ '_<' . $file } ) {
1857 if ( ($try) = grep( m#^_<.*$file#, keys %main:: ) ) {
1858 {
1859 $try = substr( $try, 2 );
1860 print $OUT "Choosing $try matching '$file':\n";
1861 $file = $try;
1862 }
1863 } ## end if (($try) = grep(m#^_<.*$file#...
1864 } ## end if (!defined $main::{ ...
1865
1866 # If not successfully switched now, we failed.
1867 if ( !defined $main::{ '_<' . $file } ) {
1868 print $OUT "No file matching '$file' is loaded.\n";
1869 next CMD;
1870 }
1871
1872 # We switched, so switch the debugger internals around.
1873 elsif ( $file ne $filename ) {
1874 *dbline = $main::{ '_<' . $file };
1875 $max = $#dbline;
1876 $filename = $file;
1877 $start = 1;
1878 $cmd = "l";
1879 } ## end elsif ($file ne $filename)
1880
1881 # We didn't switch; say we didn't.
1882 else {
1883 print $OUT "Already in $file.\n";
1884 next CMD;
1885 }
1886 }
1887
1888 return;
1889}
1890
6115a173
SF
1891sub _DB__handle_dot_command {
1892 my ($obj) = @_;
1893
1894 # . command.
1895 if ($cmd eq '.') {
1896 $incr = -1; # stay at current line
1897
1898 # Reset everything to the old location.
1899 $start = $line;
1900 $filename = $filename_ini;
1901 *dbline = $main::{ '_<' . $filename };
1902 $max = $#dbline;
1903
1904 # Now where are we?
1905 print_lineinfo($obj->position());
1906 next CMD;
1907 }
1908
1909 return;
1910}
1911
5c2b78e7
SF
1912sub _DB__handle_y_command {
1913 my ($obj) = @_;
1914
1915 if (my ($match_level, $match_vars)
1916 = $cmd =~ /^y(?:\s+(\d*)\s*(.*))?$/) {
1917
1918 # See if we've got the necessary support.
1919 eval { require PadWalker; PadWalker->VERSION(0.08) }
1920 or &warn(
1921 $@ =~ /locate/
1922 ? "PadWalker module not found - please install\n"
1923 : $@
1924 )
1925 and next CMD;
1926
1927 # Load up dumpvar if we don't have it. If we can, that is.
1928 do 'dumpvar.pl' || die $@ unless defined &main::dumpvar;
1929 defined &main::dumpvar
1930 or print $OUT "dumpvar.pl not available.\n"
1931 and next CMD;
1932
1933 # Got all the modules we need. Find them and print them.
1934 my @vars = split( ' ', $match_vars || '' );
1935
1936 # Find the pad.
1937 my $h = eval { PadWalker::peek_my( ( $match_level || 0 ) + 1 ) };
1938
1939 # Oops. Can't find it.
1940 $@ and $@ =~ s/ at .*//, &warn($@), next CMD;
1941
1942 # Show the desired vars with dumplex().
1943 my $savout = select($OUT);
1944
1945 # Have dumplex dump the lexicals.
1946 dumpvar::dumplex( $_, $h->{$_},
1947 defined $option{dumpDepth} ? $option{dumpDepth} : -1,
1948 @vars )
1949 for sort keys %$h;
1950 select($savout);
1951 next CMD;
1952 }
1953}
1954
35cd713a
SF
1955sub _DB__handle_c_command {
1956 my ($obj) = @_;
1957
1958 if (my ($new_i) = $cmd =~ m#\Ac\b\s*([\w:]*)\s*\z#) {
1959
1960 $obj->i_cmd($new_i);
1961
1962 # Hey, show's over. The debugged program finished
1963 # executing already.
1964 next CMD if _DB__is_finished();
1965
1966 # Capture the place to put a one-time break.
1967 $subname = $obj->i_cmd;
1968
1969 # Probably not needed, since we finish an interactive
1970 # sub-session anyway...
1971 # local $filename = $filename;
1972 # local *dbline = *dbline; # XXX Would this work?!
1973 #
1974 # The above question wonders if localizing the alias
1975 # to the magic array works or not. Since it's commented
1976 # out, we'll just leave that to speculation for now.
1977
1978 # If the "subname" isn't all digits, we'll assume it
1979 # is a subroutine name, and try to find it.
1980 if ( $subname =~ /\D/ ) { # subroutine name
1981 # Qualify it to the current package unless it's
1982 # already qualified.
1983 $subname = $package . "::" . $subname
1984 unless $subname =~ /::/;
1985
1986 # find_sub will return "file:line_number" corresponding
1987 # to where the subroutine is defined; we call find_sub,
1988 # break up the return value, and assign it in one
1989 # operation.
1990 ( $file, $new_i ) = ( find_sub($subname) =~ /^(.*):(.*)$/ );
1991
1992 # Force the line number to be numeric.
1993 $obj->i_cmd($new_i + 0);
1994
1995 # If we got a line number, we found the sub.
1996 if ($obj->i_cmd) {
1997
1998 # Switch all the debugger's internals around so
1999 # we're actually working with that file.
2000 $filename = $file;
2001 *dbline = $main::{ '_<' . $filename };
2002
2003 # Mark that there's a breakpoint in this file.
2004 $had_breakpoints{$filename} |= 1;
2005
2006 # Scan forward to the first executable line
2007 # after the 'sub whatever' line.
2008 $max = $#dbline;
2009 my $ii = $obj->i_cmd;
2010 ++$ii while $dbline[$ii] == 0 && $ii < $max;
2011 $obj->i_cmd($ii);
2012 } ## end if ($i)
2013
2014 # We didn't find a sub by that name.
2015 else {
2016 print $OUT "Subroutine $subname not found.\n";
2017 next CMD;
2018 }
2019 } ## end if ($subname =~ /\D/)
2020
2021 # At this point, either the subname was all digits (an
2022 # absolute line-break request) or we've scanned through
2023 # the code following the definition of the sub, looking
2024 # for an executable, which we may or may not have found.
2025 #
2026 # If $i (which we set $subname from) is non-zero, we
2027 # got a request to break at some line somewhere. On
2028 # one hand, if there wasn't any real subroutine name
2029 # involved, this will be a request to break in the current
2030 # file at the specified line, so we have to check to make
2031 # sure that the line specified really is breakable.
2032 #
2033 # On the other hand, if there was a subname supplied, the
2034 # preceding block has moved us to the proper file and
2035 # location within that file, and then scanned forward
2036 # looking for the next executable line. We have to make
2037 # sure that one was found.
2038 #
2039 # On the gripping hand, we can't do anything unless the
2040 # current value of $i points to a valid breakable line.
2041 # Check that.
2042 if ($obj->i_cmd) {
2043
2044 # Breakable?
2045 if ( $dbline[$obj->i_cmd] == 0 ) {
2046 print $OUT "Line " . $obj->i_cmd . " not breakable.\n";
2047 next CMD;
2048 }
2049
2050 # Yes. Set up the one-time-break sigil.
2051 $dbline{$obj->i_cmd} =~ s/($|\0)/;9$1/; # add one-time-only b.p.
2052 _enable_breakpoint_temp_enabled_status($filename, $obj->i_cmd);
2053 } ## end if ($i)
2054
2055 # Turn off stack tracing from here up.
2056 for my $i (0 .. $stack_depth) {
2057 $stack[ $i ] &= ~1;
2058 }
2059 last CMD;
2060 }
2061
2062 return;
2063}
2064
a4d311a3
SF
2065sub _DB__handle_forward_slash_command {
2066 my ($obj) = @_;
2067
2068 # The pattern as a string.
2069 use vars qw($inpat);
2070
2071 if (($inpat) = $cmd =~ m#\A/(.*)\z#) {
2072
2073 # Remove the final slash.
2074 $inpat =~ s:([^\\])/$:$1:;
2075
2076 # If the pattern isn't null ...
2077 if ( $inpat ne "" ) {
2078
2079 # Turn of warn and die procesing for a bit.
2080 local $SIG{__DIE__};
2081 local $SIG{__WARN__};
2082
2083 # Create the pattern.
2084 eval 'no strict q/vars/; $inpat =~ m' . "\a$inpat\a";
2085 if ( $@ ne "" ) {
2086
2087 # Oops. Bad pattern. No biscuit.
2088 # Print the eval error and go back for more
2089 # commands.
2090 print $OUT "$@";
2091 next CMD;
2092 }
2093 $obj->pat($inpat);
2094 } ## end if ($inpat ne "")
2095
2096 # Set up to stop on wrap-around.
2097 $end = $start;
2098
2099 # Don't move off the current line.
2100 $incr = -1;
2101
2102 my $pat = $obj->pat;
2103
2104 # Done in eval so nothing breaks if the pattern
2105 # does something weird.
2106 eval
2107 {
2108 no strict q/vars/;
2109 for (;;) {
2110 # Move ahead one line.
2111 ++$start;
2112
2113 # Wrap if we pass the last line.
2114 $start = 1 if ($start > $max);
2115
2116 # Stop if we have gotten back to this line again,
2117 last if ($start == $end);
2118
2119 # A hit! (Note, though, that we are doing
2120 # case-insensitive matching. Maybe a qr//
2121 # expression would be better, so the user could
2122 # do case-sensitive matching if desired.
2123 if ($dbline[$start] =~ m/$pat/i) {
2124 if ($slave_editor) {
2125 # Handle proper escaping in the slave.
2126 print $OUT "\032\032$filename:$start:0\n";
2127 }
2128 else {
2129 # Just print the line normally.
2130 print $OUT "$start:\t",$dbline[$start],"\n";
2131 }
2132 # And quit since we found something.
2133 last;
2134 }
2135 }
2136 };
2137
2138 if ($@) {
2139 warn $@;
2140 }
2141
2142 # If we wrapped, there never was a match.
2143 if ( $start == $end ) {
2144 print {$OUT} "/$pat/: not found\n";
2145 }
2146 next CMD;
2147 }
2148
2149 return;
2150}
2151
11f0f050
SF
2152sub _DB__handle_question_mark_command {
2153 my ($obj) = @_;
2154
2155 # ? - backward pattern search.
2156 if (my ($inpat) = $cmd =~ m#\A\?(.*)\z#) {
2157
2158 # Get the pattern, remove trailing question mark.
2159 $inpat =~ s:([^\\])\?$:$1:;
2160
2161 # If we've got one ...
2162 if ( $inpat ne "" ) {
2163
2164 # Turn off die & warn handlers.
2165 local $SIG{__DIE__};
2166 local $SIG{__WARN__};
2167 eval '$inpat =~ m' . "\a$inpat\a";
2168
2169 if ( $@ ne "" ) {
2170
2171 # Ouch. Not good. Print the error.
2172 print $OUT $@;
2173 next CMD;
2174 }
2175 $obj->pat($inpat);
2176 } ## end if ($inpat ne "")
2177
2178 # Where we are now is where to stop after wraparound.
2179 $end = $start;
2180
2181 # Don't move away from this line.
2182 $incr = -1;
2183
2184 my $pat = $obj->pat;
2185 # Search inside the eval to prevent pattern badness
2186 # from killing us.
2187 eval {
2188 no strict q/vars/;
2189 for (;;) {
2190 # Back up a line.
2191 --$start;
2192
2193 # Wrap if we pass the first line.
2194
2195 $start = $max if ($start <= 0);
2196
2197 # Quit if we get back where we started,
2198 last if ($start == $end);
2199
2200 # Match?
2201 if ($dbline[$start] =~ m/$pat/i) {
2202 if ($slave_editor) {
2203 # Yep, follow slave editor requirements.
2204 print $OUT "\032\032$filename:$start:0\n";
2205 }
2206 else {
2207 # Yep, just print normally.
2208 print $OUT "$start:\t",$dbline[$start],"\n";
2209 }
2210
2211 # Found, so done.
2212 last;
2213 }
2214 }
2215 };
2216
2217 # Say we failed if the loop never found anything,
2218 if ( $start == $end ) {
2219 print {$OUT} "?$pat?: not found\n";
2220 }
2221 next CMD;
2222 }
2223
2224 return;
2225}
2226
2b0b9dd1
SF
2227sub DB {
2228
2229 # lock the debugger and get the thread id for the prompt
2230 lock($DBGR);
2231 my $tid;
2232 my $position;
2233 my ($prefix, $after, $infix);
2234 my $pat;
22fc883d 2235 my $explicit_stop;
2b0b9dd1
SF
2236
2237 if ($ENV{PERL5DB_THREADED}) {
2238 $tid = eval { "[".threads->tid."]" };
2239 }
2240
35cd713a
SF
2241 my $i;
2242
22fc883d
SF
2243 my $obj = DB::Obj->new(
2244 {
2245 position => \$position,
2246 prefix => \$prefix,
2247 after => \$after,
2248 explicit_stop => \$explicit_stop,
2249 infix => \$infix,
35cd713a 2250 i_cmd => \$i,
a4d311a3 2251 pat => \$pat,
22fc883d
SF
2252 },
2253 );
2254
2255 $obj->_DB_on_init__initialize_globals(@_);
2b0b9dd1 2256
69893cff
RGS
2257 # Preserve current values of $@, $!, $^E, $,, $/, $\, $^W.
2258 # The code being debugged may have altered them.
d338d6fe 2259 &save;
69893cff
RGS
2260
2261 # Since DB::DB gets called after every line, we can use caller() to
2262 # figure out where we last were executing. Sneaky, eh? This works because
e22ea7cc 2263 # caller is returning all the extra information when called from the
69893cff 2264 # debugger.
e22ea7cc 2265 local ( $package, $filename, $line ) = caller;
6b24a4b7 2266 $filename_ini = $filename;
69893cff
RGS
2267
2268 # set up the context for DB::eval, so it can properly execute
2269 # code on behalf of the user. We add the package in so that the
2270 # code is eval'ed in the proper package (not in the debugger!).
6b24a4b7 2271 local $usercontext = _calc_usercontext($package);
69893cff
RGS
2272
2273 # Create an alias to the active file magical array to simplify
2274 # the code here.
e22ea7cc 2275 local (*dbline) = $main::{ '_<' . $filename };
aa057b67 2276
69893cff 2277 # Last line in the program.
55783941 2278 $max = $#dbline;
69893cff 2279
22fc883d 2280 _DB__determine_if_we_should_break(@_);
69893cff
RGS
2281
2282 # Preserve the current stop-or-not, and see if any of the W
2283 # (watch expressions) has changed.
36477c24 2284 my $was_signal = $signal;
69893cff
RGS
2285
2286 # If we have any watch expressions ...
22fc883d 2287 $obj->_DB__handle_watch_expressions(@_);
69893cff
RGS
2288
2289=head2 C<watchfunction()>
2290
2291C<watchfunction()> is a function that can be defined by the user; it is a
b570d64b 2292function which will be run on each entry to C<DB::DB>; it gets the
69893cff
RGS
2293current package, filename, and line as its parameters.
2294
b570d64b 2295The watchfunction can do anything it likes; it is executing in the
69893cff
RGS
2296debugger's context, so it has access to all of the debugger's internal
2297data structures and functions.
2298
2299C<watchfunction()> can control the debugger's actions. Any of the following
2300will cause the debugger to return control to the user's program after
2301C<watchfunction()> executes:
2302
b570d64b 2303=over 4
69893cff 2304
be9a9b1d
AT
2305=item *
2306
2307Returning a false value from the C<watchfunction()> itself.
2308
2309=item *
2310
2311Altering C<$single> to a false value.
2312
2313=item *
69893cff 2314
be9a9b1d 2315Altering C<$signal> to a false value.
69893cff 2316
be9a9b1d 2317=item *
69893cff 2318
be9a9b1d 2319Turning off the C<4> bit in C<$trace> (this also disables the
69893cff
RGS
2320check for C<watchfunction()>. This can be done with
2321
2322 $trace &= ~4;
2323
2324=back
2325
2326=cut
2327
e22ea7cc 2328 # If there's a user-defined DB::watchfunction, call it with the
69893cff
RGS
2329 # current package, filename, and line. The function executes in
2330 # the DB:: package.
e22ea7cc
RF
2331 if ( $trace & 4 ) { # User-installed watch
2332 return
2333 if watchfunction( $package, $filename, $line )
2334 and not $single
2335 and not $was_signal
2336 and not( $trace & ~4 );
69893cff
RGS
2337 } ## end if ($trace & 4)
2338
e22ea7cc 2339 # Pick up any alteration to $signal in the watchfunction, and
69893cff 2340 # turn off the signal now.
6027b9a3 2341 $was_signal = $signal;
69893cff
RGS
2342 $signal = 0;
2343
2344=head2 GETTING READY TO EXECUTE COMMANDS
2345
2346The debugger decides to take control if single-step mode is on, the
2347C<t> command was entered, or the user generated a signal. If the program
2348has fallen off the end, we set things up so that entering further commands
2349won't cause trouble, and we say that the program is over.
2350
2351=cut
2352
8dc67a69
SF
2353 # Make sure that we always print if asked for explicitly regardless
2354 # of $trace_to_depth .
22fc883d 2355 $explicit_stop = ($single || $was_signal);
8dc67a69 2356
69893cff
RGS
2357 # Check to see if we should grab control ($single true,
2358 # trace set appropriately, or we got a signal).
8dc67a69 2359 if ( $explicit_stop || ( $trace & 1 ) ) {
22fc883d 2360 $obj->_DB__grab_control(@_);
69893cff
RGS
2361 } ## end if ($single || ($trace...
2362
2363=pod
2364
2365If there's an action to be executed for the line we stopped at, execute it.
b570d64b 2366If there are any preprompt actions, execute those as well.
e219e2fb
RF
2367
2368=cut
2369
69893cff 2370 # If there's an action, do it now.
05da04df
SF
2371 if ($action) {
2372 $evalarg = $action;
2373 DB::eval();
2374 }
e219e2fb 2375
69893cff
RGS
2376 # Are we nested another level (e.g., did we evaluate a function
2377 # that had a breakpoint in it at the debugger prompt)?
e22ea7cc
RF
2378 if ( $single || $was_signal ) {
2379
69893cff 2380 # Yes, go down a level.
e22ea7cc 2381 local $level = $level + 1;
69893cff
RGS
2382
2383 # Do any pre-prompt actions.
e22ea7cc 2384 foreach $evalarg (@$pre) {
7c54f46a 2385 DB::eval();
e22ea7cc 2386 }
69893cff
RGS
2387
2388 # Complain about too much recursion if we passed the limit.
05da04df
SF
2389 if ($single & 4) {
2390 print $OUT $stack_depth . " levels deep in subroutine calls!\n";
2391 }
69893cff
RGS
2392
2393 # The line we're currently on. Set $incr to -1 to stay here
2394 # until we get a command that tells us to advance.
e22ea7cc
RF
2395 $start = $line;
2396 $incr = -1; # for backward motion.
69893cff
RGS
2397
2398 # Tack preprompt debugger actions ahead of any actual input.
e22ea7cc 2399 @typeahead = ( @$pretype, @typeahead );
69893cff
RGS
2400
2401=head2 WHERE ARE WE?
2402
2403XXX Relocate this section?
2404
2405The debugger normally shows the line corresponding to the current line of
2406execution. Sometimes, though, we want to see the next line, or to move elsewhere
2407in the file. This is done via the C<$incr>, C<$start>, and C<$max> variables.
2408
be9a9b1d
AT
2409C<$incr> controls by how many lines the I<current> line should move forward
2410after a command is executed. If set to -1, this indicates that the I<current>
69893cff
RGS
2411line shouldn't change.
2412
be9a9b1d 2413C<$start> is the I<current> line. It is used for things like knowing where to
69893cff
RGS
2414move forwards or backwards from when doing an C<L> or C<-> command.
2415
2416C<$max> tells the debugger where the last line of the current file is. It's
2417used to terminate loops most often.
2418
2419=head2 THE COMMAND LOOP
2420
2421Most of C<DB::DB> is actually a command parsing and dispatch loop. It comes
2422in two parts:
2423
2424=over 4
2425
be9a9b1d
AT
2426=item *
2427
2428The outer part of the loop, starting at the C<CMD> label. This loop
69893cff
RGS
2429reads a command and then executes it.
2430
be9a9b1d
AT
2431=item *
2432
2433The inner part of the loop, starting at the C<PIPE> label. This part
69893cff
RGS
2434is wholly contained inside the C<CMD> block and only executes a command.
2435Used to handle commands running inside a pager.
2436
2437=back
2438
2439So why have two labels to restart the loop? Because sometimes, it's easier to
2440have a command I<generate> another command and then re-execute the loop to do
2441the new command. This is faster, but perhaps a bit more convoluted.
2442
2443=cut
2444
2445 # The big command dispatch loop. It keeps running until the
2446 # user yields up control again.
2447 #
2448 # If we have a terminal for input, and we get something back
2449 # from readline(), keep on processing.
6b24a4b7
SF
2450 my $piped;
2451 my $selected;
2452
e22ea7cc 2453 CMD:
32bbadc6 2454 while (_DB__read_next_cmd($tid))
69893cff 2455 {
e22ea7cc 2456
8380a245 2457 share($cmd);
69893cff
RGS
2458 # ... try to execute the input as debugger commands.
2459
2460 # Don't stop running.
2461 $single = 0;
2462
2463 # No signal is active.
2464 $signal = 0;
2465
2466 # Handle continued commands (ending with \):
3d7a2a93 2467 if ($cmd =~ s/\\\z/\n/) {
eeb7da96 2468 $cmd .= DB::readline(" cont: ");
e22ea7cc 2469 redo CMD;
3d7a2a93 2470 }
69893cff
RGS
2471
2472=head4 The null command
2473
be9a9b1d 2474A newline entered by itself means I<re-execute the last command>. We grab the
69893cff
RGS
2475command out of C<$laststep> (where it was recorded previously), and copy it
2476back into C<$cmd> to be executed below. If there wasn't any previous command,
2477we'll do nothing below (no command will match). If there was, we also save it
2478in the command history and fall through to allow the command parsing to pick
2479it up.
2480
2481=cut
2482
2483 # Empty input means repeat the last command.
eeb7da96
SF
2484 if ($cmd eq '') {
2485 $cmd = $laststep;
2486 }
e22ea7cc 2487 chomp($cmd); # get rid of the annoying extra newline
eeb7da96
SF
2488 if (length($cmd) >= 2) {
2489 push( @hist, $cmd );
2490 }
e22ea7cc 2491 push( @truehist, $cmd );
2dbd01ad
SF
2492 share(@hist);
2493 share(@truehist);
e22ea7cc
RF
2494
2495 # This is a restart point for commands that didn't arrive
2496 # via direct user input. It allows us to 'redo PIPE' to
2497 # re-execute command processing without reading a new command.
69893cff 2498 PIPE: {
35cd713a 2499 $i = _DB__trim_command_and_return_first_component();
69893cff
RGS
2500
2501=head3 COMMAND ALIASES
2502
2503The debugger can create aliases for commands (these are stored in the
2504C<%alias> hash). Before a command is executed, the command loop looks it up
2505in the alias hash and substitutes the contents of the alias for the command,
2506completely replacing it.
2507
2508=cut
2509
2510 # See if there's an alias for the command, and set it up if so.
e22ea7cc
RF
2511 if ( $alias{$i} ) {
2512
69893cff
RGS
2513 # Squelch signal handling; we want to keep control here
2514 # if something goes loco during the alias eval.
2515 local $SIG{__DIE__};
2516 local $SIG{__WARN__};
2517
2518 # This is a command, so we eval it in the DEBUGGER's
2519 # scope! Otherwise, we can't see the special debugger
2520 # variables, or get to the debugger's subs. (Well, we
2521 # _could_, but why make it even more complicated?)
2522 eval "\$cmd =~ $alias{$i}";
2523 if ($@) {
2524 local $\ = '';
1f874cb6 2525 print $OUT "Couldn't evaluate '$i' alias: $@";
69893cff
RGS
2526 next CMD;
2527 }
2528 } ## end if ($alias{$i})
2529
2530=head3 MAIN-LINE COMMANDS
2531
2532All of these commands work up to and after the program being debugged has
b570d64b 2533terminated.
69893cff
RGS
2534
2535=head4 C<q> - quit
2536
b570d64b 2537Quit the debugger. This entails setting the C<$fall_off_end> flag, so we don't
69893cff
RGS
2538try to execute further, cleaning any restart-related stuff out of the
2539environment, and executing with the last value of C<$?>.
2540
2541=cut
2542
3d7a2a93 2543 if ($cmd eq 'q') {
69893cff
RGS
2544 $fall_off_end = 1;
2545 clean_ENV();
2546 exit $?;
3d7a2a93 2547 }
69893cff 2548
611272bb 2549=head4 C<t> - trace [n]
69893cff
RGS
2550
2551Turn tracing on or off. Inverts the appropriate bit in C<$trace> (q.v.).
611272bb 2552If level is specified, set C<$trace_to_depth>.
69893cff
RGS
2553
2554=cut
2555
9d0b71b3 2556 $obj->_handle_t_command;
69893cff
RGS
2557
2558=head4 C<S> - list subroutines matching/not matching a pattern
2559
2560Walks through C<%sub>, checking to see whether or not to print the name.
2561
2562=cut
2563
9d0b71b3 2564 $obj->_handle_S_command;
69893cff
RGS
2565
2566=head4 C<X> - list variables in current package
2567
b570d64b 2568Since the C<V> command actually processes this, just change this to the
69893cff
RGS
2569appropriate C<V> command and fall through.
2570
69893cff
RGS
2571=head4 C<V> - list variables
2572
b570d64b 2573Uses C<dumpvar.pl> to dump out the current values for selected variables.
69893cff
RGS
2574
2575=cut
2576
1ce985d2 2577 $obj->_handle_V_command_and_X_command;
69893cff
RGS
2578
2579=head4 C<x> - evaluate and print an expression
2580
2581Hands the expression off to C<DB::eval>, setting it up to print the value
2582via C<dumpvar.pl> instead of just printing it directly.
2583
2584=cut
2585
826b9a2e 2586 if ($cmd =~ s#\Ax\b# #) { # Remainder gets done by DB::eval()
e22ea7cc 2587 $onetimeDump = 'dump'; # main::dumpvar shows the output
69893cff
RGS
2588
2589 # handle special "x 3 blah" syntax XXX propagate
2590 # doc back to special variables.
826b9a2e 2591 if ( $cmd =~ s#\A\s*(\d+)(?=\s)# #) {
e22ea7cc
RF
2592 $onetimedumpDepth = $1;
2593 }
826b9a2e 2594 }
69893cff
RGS
2595
2596=head4 C<m> - print methods
2597
2598Just uses C<DB::methods> to determine what methods are available.
2599
2600=cut
2601
826b9a2e 2602 if ($cmd =~ s#\Am\s+([\w:]+)\s*\z# #) {
e22ea7cc
RF
2603 methods($1);
2604 next CMD;
826b9a2e 2605 }
69893cff
RGS
2606
2607 # m expr - set up DB::eval to do the work
826b9a2e 2608 if ($cmd =~ s#\Am\b# #) { # Rest gets done by DB::eval()
e22ea7cc 2609 $onetimeDump = 'methods'; # method output gets used there
826b9a2e 2610 }
69893cff
RGS
2611
2612=head4 C<f> - switch files
2613
2614=cut
2615
2a802473 2616 _DB__handle_f_command();
69893cff
RGS
2617
2618=head4 C<.> - return to last-executed line.
2619
2620We set C<$incr> to -1 to indicate that the debugger shouldn't move ahead,
2621and then we look up the line in the magical C<%dbline> hash.
2622
2623=cut
2624
6115a173 2625 _DB__handle_dot_command($obj);
69893cff
RGS
2626
2627=head4 C<-> - back one window
2628
2629We change C<$start> to be one window back; if we go back past the first line,
2630we set it to be the first line. We ser C<$incr> to put us back at the
2631currently-executing line, and then put a C<l $start +> (list one window from
2632C<$start>) in C<$cmd> to be executed later.
2633
2634=cut
2635
2636 # - - back a window.
d1450c23 2637 $obj->_handle_dash_command;
69893cff 2638
8481f647 2639=head3 PRE-580 COMMANDS VS. NEW COMMANDS: C<a, A, b, B, h, l, L, M, o, O, P, v, w, W, E<lt>, E<lt>E<lt>, E<0x7B>, E<0x7B>E<0x7B>>
69893cff
RGS
2640
2641In Perl 5.8.0, a realignment of the commands was done to fix up a number of
2642problems, most notably that the default case of several commands destroying
2643the user's work in setting watchpoints, actions, etc. We wanted, however, to
2644retain the old commands for those who were used to using them or who preferred
2645them. At this point, we check for the new commands and call C<cmd_wrapper> to
2646deal with them instead of processing them in-line.
2647
2648=cut
2649
2650 # All of these commands were remapped in perl 5.8.0;
e22ea7cc 2651 # we send them off to the secondary dispatcher (see below).
826b9a2e
SF
2652 if (my ($cmd_letter, $my_arg) = $cmd =~ /\A([aAbBeEhilLMoOPvwW]\b|[<>\{]{1,2})\s*(.*)/so) {
2653 &cmd_wrapper( $cmd_letter, $my_arg, $line );
e22ea7cc 2654 next CMD;
826b9a2e 2655 }
69893cff
RGS
2656
2657=head4 C<y> - List lexicals in higher scope
2658
826b9a2e 2659Uses C<PadWalker> to find the lexicals supplied as arguments in a scope
69893cff
RGS
2660above the current one and then displays then using C<dumpvar.pl>.
2661
2662=cut
2663
5c2b78e7 2664 _DB__handle_y_command($obj);
69893cff
RGS
2665
2666=head3 COMMANDS NOT WORKING AFTER PROGRAM ENDS
2667
2668All of the commands below this point don't work after the program being
2669debugged has ended. All of them check to see if the program has ended; this
2670allows the commands to be relocated without worrying about a 'line of
2671demarcation' above which commands can be entered anytime, and below which
2672they can't.
2673
2674=head4 C<n> - single step, but don't trace down into subs
2675
2676Done by setting C<$single> to 2, which forces subs to execute straight through
be9a9b1d 2677when entered (see C<DB::sub>). We also save the C<n> command in C<$laststep>,
826b9a2e 2678so a null command knows what to re-execute.
69893cff
RGS
2679
2680=cut
2681
e22ea7cc 2682 # n - next
73c5e526 2683 $obj->_handle_n_command;
69893cff
RGS
2684
2685=head4 C<s> - single-step, entering subs
2686
826b9a2e 2687Sets C<$single> to 1, which causes C<DB::sub> to continue tracing inside
69893cff
RGS
2688subs. Also saves C<s> as C<$lastcmd>.
2689
2690=cut
2691
cb9d1513 2692 $obj->_handle_s_command;
69893cff
RGS
2693
2694=head4 C<c> - run continuously, setting an optional breakpoint
2695
2696Most of the code for this command is taken up with locating the optional
2697breakpoint, which is either a subroutine name or a line number. We set
2698the appropriate one-time-break in C<@dbline> and then turn off single-stepping
2699in this and all call levels above this one.
2700
2701=cut
2702
2703 # c - start continuous execution.
35cd713a 2704 _DB__handle_c_command($obj);
69893cff
RGS
2705
2706=head4 C<r> - return from a subroutine
2707
2708For C<r> to work properly, the debugger has to stop execution again
2709immediately after the return is executed. This is done by forcing
2710single-stepping to be on in the call level above the current one. If
2711we are printing return values when a C<r> is executed, set C<$doret>
2712appropriately, and force us out of the command loop.
2713
2714=cut
2715
2716 # r - return from the current subroutine.
573b5003 2717 $obj->_handle_r_command;
69893cff 2718
69893cff
RGS
2719=head4 C<T> - stack trace
2720
2721Just calls C<DB::print_trace>.
2722
2723=cut
2724
d4038e14 2725 $obj->_handle_T_command;
69893cff
RGS
2726
2727=head4 C<w> - List window around current line.
2728
2729Just calls C<DB::cmd_w>.
2730
2731=cut
2732
b6e88520 2733 $obj->_handle_w_command;
69893cff
RGS
2734
2735=head4 C<W> - watch-expression processing.
2736
b570d64b 2737Just calls C<DB::cmd_W>.
69893cff
RGS
2738
2739=cut
2740
25953301 2741 $obj->_handle_W_command;
69893cff
RGS
2742
2743=head4 C</> - search forward for a string in the source
2744
ef18ae63 2745We take the argument and treat it as a pattern. If it turns out to be a
69893cff 2746bad one, we return the error we got from trying to C<eval> it and exit.
ef18ae63 2747If not, we create some code to do the search and C<eval> it so it can't
69893cff
RGS
2748mess us up.
2749
2750=cut
2751
a4d311a3 2752 _DB__handle_forward_slash_command($obj);
69893cff
RGS
2753
2754=head4 C<?> - search backward for a string in the source
2755
2756Same as for C</>, except the loop runs backwards.
2757
2758=cut
2759
11f0f050 2760 _DB__handle_question_mark_command($obj);
69893cff
RGS
2761
2762=head4 C<$rc> - Recall command
2763
2764Manages the commands in C<@hist> (which is created if C<Term::ReadLine> reports
2765that the terminal supports history). It find the the command required, puts it
2766into C<$cmd>, and redoes the loop to execute it.
2767
2768=cut
2769
e22ea7cc 2770 # $rc - recall command.
ef18ae63 2771 if (my ($minus, $arg) = $cmd =~ m#\A$rc+\s*(-)?(\d+)?\z#) {
69893cff
RGS
2772
2773 # No arguments, take one thing off history.
e22ea7cc 2774 pop(@hist) if length($cmd) > 1;
69893cff 2775
e22ea7cc 2776 # Relative (- found)?
69893cff 2777 # Y - index back from most recent (by 1 if bare minus)
e22ea7cc 2778 # N - go to that particular command slot or the last
69893cff 2779 # thing if nothing following.
ef18ae63 2780 $i = $minus ? ( $#hist - ( $arg || 1 ) ) : ( $arg || $#hist );
69893cff
RGS
2781
2782 # Pick out the command desired.
e22ea7cc 2783 $cmd = $hist[$i];
69893cff
RGS
2784
2785 # Print the command to be executed and restart the loop
2786 # with that command in the buffer.
e22ea7cc
RF
2787 print $OUT $cmd, "\n";
2788 redo CMD;
ef18ae63 2789 }
69893cff
RGS
2790
2791=head4 C<$sh$sh> - C<system()> command
2792
2793Calls the C<DB::system()> to handle the command. This keeps the C<STDIN> and
2794C<STDOUT> from getting messed up.
2795
2796=cut
2797
2798 # $sh$sh - run a shell command (if it's all ASCII).
2799 # Can't run shell commands with Unicode in the debugger, hmm.
ef18ae63 2800 if (my ($arg) = $cmd =~ m#\A$sh$sh\s*(.*)#ms) {
e22ea7cc 2801
69893cff 2802 # System it.
ef18ae63 2803 &system($arg);
e22ea7cc 2804 next CMD;
ef18ae63 2805 }
69893cff
RGS
2806
2807=head4 C<$rc I<pattern> $rc> - Search command history
2808
2809Another command to manipulate C<@hist>: this one searches it with a pattern.
be9a9b1d 2810If a command is found, it is placed in C<$cmd> and executed via C<redo>.
69893cff
RGS
2811
2812=cut
2813
e22ea7cc 2814 # $rc pattern $rc - find a command in the history.
ef18ae63 2815 if (my ($arg) = $cmd =~ /\A$rc([^$rc].*)\z/) {
e22ea7cc 2816
69893cff 2817 # Create the pattern to use.
ef18ae63 2818 $pat = "^$arg";
69893cff
RGS
2819
2820 # Toss off last entry if length is >1 (and it always is).
e22ea7cc 2821 pop(@hist) if length($cmd) > 1;
69893cff
RGS
2822
2823 # Look backward through the history.
72d7d80d 2824 for ( $i = $#hist ; $i ; --$i ) {
69893cff 2825 # Stop if we find it.
e22ea7cc
RF
2826 last if $hist[$i] =~ /$pat/;
2827 }
2828
2829 if ( !$i ) {
69893cff 2830
69893cff 2831 # Never found it.
e22ea7cc
RF
2832 print $OUT "No such command!\n\n";
2833 next CMD;
2834 }
69893cff
RGS
2835
2836 # Found it. Put it in the buffer, print it, and process it.
e22ea7cc
RF
2837 $cmd = $hist[$i];
2838 print $OUT $cmd, "\n";
2839 redo CMD;
ef18ae63 2840 }
69893cff 2841
ef18ae63 2842=head4 C<$sh> - Invoke a shell
69893cff
RGS
2843
2844Uses C<DB::system> to invoke a shell.
2845
2846=cut
2847
2848 # $sh - start a shell.
ef18ae63 2849 if ($cmd =~ /\A$sh\z/) {
e22ea7cc 2850
69893cff
RGS
2851 # Run the user's shell. If none defined, run Bourne.
2852 # We resume execution when the shell terminates.
e22ea7cc
RF
2853 &system( $ENV{SHELL} || "/bin/sh" );
2854 next CMD;
ef18ae63 2855 }
69893cff
RGS
2856
2857=head4 C<$sh I<command>> - Force execution of a command in a shell
2858
2859Like the above, but the command is passed to the shell. Again, we use
2860C<DB::system> to avoid problems with C<STDIN> and C<STDOUT>.
2861
2862=cut
2863
2864 # $sh command - start a shell and run a command in it.
ef18ae63 2865 if (my ($arg) = $cmd =~ m#\A$sh\s*(.*)#ms) {
e22ea7cc
RF
2866
2867 # XXX: using csh or tcsh destroys sigint retvals!
2868 #&system($1); # use this instead
69893cff
RGS
2869
2870 # use the user's shell, or Bourne if none defined.
ef18ae63 2871 &system( $ENV{SHELL} || "/bin/sh", "-c", $arg );
e22ea7cc 2872 next CMD;
ef18ae63 2873 }
69893cff
RGS
2874
2875=head4 C<H> - display commands in history
2876
2877Prints the contents of C<@hist> (if any).
2878
2879=cut
2880
ef18ae63 2881 if ($cmd =~ /\AH\b\s*\*/) {
7fddc82f
RF
2882 @hist = @truehist = ();
2883 print $OUT "History cleansed\n";
2884 next CMD;
ef18ae63 2885 }
e22ea7cc 2886
ef18ae63
SF
2887 if (my ($num)
2888 = $cmd =~ /\AH\b\s*(?:-(\d+))?/) {
e22ea7cc
RF
2889
2890 # Anything other than negative numbers is ignored by
69893cff 2891 # the (incorrect) pattern, so this test does nothing.
ef18ae63 2892 $end = $num ? ( $#hist - $num ) : 0;
69893cff
RGS
2893
2894 # Set to the minimum if less than zero.
e22ea7cc 2895 $hist = 0 if $hist < 0;
69893cff 2896
e22ea7cc 2897 # Start at the end of the array.
69893cff
RGS
2898 # Stay in while we're still above the ending value.
2899 # Tick back by one each time around the loop.
72d7d80d 2900 for ( $i = $#hist ; $i > $end ; $i-- ) {
69893cff
RGS
2901
2902 # Print the command unless it has no arguments.
e22ea7cc
RF
2903 print $OUT "$i: ", $hist[$i], "\n"
2904 unless $hist[$i] =~ /^.?$/;
2905 }
2906 next CMD;
ef18ae63 2907 }
69893cff
RGS
2908
2909=head4 C<man, doc, perldoc> - look up documentation
2910
2911Just calls C<runman()> to print the appropriate document.
2912
2913=cut
2914
e22ea7cc 2915 # man, perldoc, doc - show manual pages.
ef18ae63
SF
2916 if (my ($man_page)
2917 = $cmd =~ /\A(?:man|(?:perl)?doc)\b(?:\s+([^(]*))?\z/) {
2918 runman($man_page);
e22ea7cc 2919 next CMD;
ef18ae63 2920 }
69893cff
RGS
2921
2922=head4 C<p> - print
2923
2924Builds a C<print EXPR> expression in the C<$cmd>; this will get executed at
2925the bottom of the loop.
2926
2927=cut
2928
ef18ae63 2929 my $print_cmd = 'print {$DB::OUT} ';
69893cff 2930 # p - print (no args): print $_.
ef18ae63
SF
2931 if ($cmd eq 'p') {
2932 $cmd = $print_cmd . '$_';
2933 }
69893cff
RGS
2934
2935 # p - print the given expression.
ef18ae63 2936 $cmd =~ s/\Ap\b/$print_cmd /;
69893cff
RGS
2937
2938=head4 C<=> - define command alias
2939
2940Manipulates C<%alias> to add or list command aliases.
2941
2942=cut
2943
e22ea7cc 2944 # = - set up a command alias.
ef18ae63 2945 if ($cmd =~ s/\A=\s*//) {
e22ea7cc
RF
2946 my @keys;
2947 if ( length $cmd == 0 ) {
2948
69893cff 2949 # No args, get current aliases.
e22ea7cc
RF
2950 @keys = sort keys %alias;
2951 }
2952 elsif ( my ( $k, $v ) = ( $cmd =~ /^(\S+)\s+(\S.*)/ ) ) {
2953
69893cff
RGS
2954 # Creating a new alias. $k is alias name, $v is
2955 # alias value.
2956
e22ea7cc
RF
2957 # can't use $_ or kill //g state
2958 for my $x ( $k, $v ) {
2959
2960 # Escape "alarm" characters.
2961 $x =~ s/\a/\\a/g;
2962 }
69893cff
RGS
2963
2964 # Substitute key for value, using alarm chars
e22ea7cc 2965 # as separators (which is why we escaped them in
69893cff 2966 # the command).
e22ea7cc 2967 $alias{$k} = "s\a$k\a$v\a";
69893cff
RGS
2968
2969 # Turn off standard warn and die behavior.
e22ea7cc
RF
2970 local $SIG{__DIE__};
2971 local $SIG{__WARN__};
69893cff
RGS
2972
2973 # Is it valid Perl?
e22ea7cc
RF
2974 unless ( eval "sub { s\a$k\a$v\a }; 1" ) {
2975
69893cff 2976 # Nope. Bad alias. Say so and get out.
e22ea7cc
RF
2977 print $OUT "Can't alias $k to $v: $@\n";
2978 delete $alias{$k};
2979 next CMD;
2980 }
2981
69893cff 2982 # We'll only list the new one.
e22ea7cc 2983 @keys = ($k);
69893cff
RGS
2984 } ## end elsif (my ($k, $v) = ($cmd...
2985
2986 # The argument is the alias to list.
e22ea7cc
RF
2987 else {
2988 @keys = ($cmd);
2989 }
69893cff
RGS
2990
2991 # List aliases.
e22ea7cc
RF
2992 for my $k (@keys) {
2993
98dc9551 2994 # Messy metaquoting: Trim the substitution code off.
69893cff
RGS
2995 # We use control-G as the delimiter because it's not
2996 # likely to appear in the alias.
e22ea7cc
RF
2997 if ( ( my $v = $alias{$k} ) =~ s\as\a$k\a(.*)\a$\a1\a ) {
2998
69893cff 2999 # Print the alias.
e22ea7cc
RF
3000 print $OUT "$k\t= $1\n";
3001 }
3002 elsif ( defined $alias{$k} ) {
3003
69893cff 3004 # Couldn't trim it off; just print the alias code.
e22ea7cc
RF
3005 print $OUT "$k\t$alias{$k}\n";
3006 }
3007 else {
3008
69893cff 3009 # No such, dude.
e22ea7cc
RF
3010 print "No alias for $k\n";
3011 }
69893cff 3012 } ## end for my $k (@keys)
e22ea7cc 3013 next CMD;
ef18ae63 3014 }
69893cff
RGS
3015
3016=head4 C<source> - read commands from a file.
3017
3018Opens a lexical filehandle and stacks it on C<@cmdfhs>; C<DB::readline> will
3019pick it up.
3020
3021=cut
3022
e22ea7cc 3023 # source - read commands from a file (or pipe!) and execute.
ef18ae63
SF
3024 if (my ($sourced_fn) = $cmd =~ /\Asource\s+(.*\S)/) {
3025 if ( open my $fh, $sourced_fn ) {
e22ea7cc 3026
69893cff 3027 # Opened OK; stick it in the list of file handles.
e22ea7cc
RF
3028 push @cmdfhs, $fh;
3029 }
3030 else {
3031
3032 # Couldn't open it.
ef18ae63 3033 &warn("Can't execute '$sourced_fn': $!\n");
e22ea7cc
RF
3034 }
3035 next CMD;
ef18ae63 3036 }
69893cff 3037
ef18ae63
SF
3038 if (my ($which_cmd, $position)
3039 = $cmd =~ /^(enable|disable)\s+(\S+)\s*$/) {
e09195af
SF
3040
3041 my ($fn, $line_num);
3042 if ($position =~ m{\A\d+\z})
3043 {
3044 $fn = $filename;
3045 $line_num = $position;
3046 }
ef18ae63
SF
3047 elsif (my ($new_fn, $new_line_num)
3048 = $position =~ m{\A(.*):(\d+)\z}) {
3049 ($fn, $line_num) = ($new_fn, $new_line_num);
e09195af
SF
3050 }
3051 else
3052 {
3053 &warn("Wrong spec for enable/disable argument.\n");
3054 }
3055
3056 if (defined($fn)) {
3057 if (_has_breakpoint_data_ref($fn, $line_num)) {
3058 _set_breakpoint_enabled_status($fn, $line_num,
ef18ae63 3059 ($which_cmd eq 'enable' ? 1 : '')
e09195af
SF
3060 );
3061 }
3062 else {
3063 &warn("No breakpoint set at ${fn}:${line_num}\n");
3064 }
3065 }
3066
3067 next CMD;
ef18ae63 3068 }
e09195af 3069
69893cff
RGS
3070=head4 C<save> - send current history to a file
3071
3072Takes the complete history, (not the shrunken version you see with C<H>),
3073and saves it to the given filename, so it can be replayed using C<source>.
3074
3075Note that all C<^(save|source)>'s are commented out with a view to minimise recursion.
3076
3077=cut
3078
3079 # save source - write commands to a file for later use
ef18ae63
SF
3080 if (my ($new_fn) = $cmd =~ /\Asave\s*(.*)\z/) {
3081 my $filename = $new_fn || '.perl5dbrc'; # default?
3082 if ( open my $fh, '>', $filename ) {
e22ea7cc
RF
3083
3084 # chomp to remove extraneous newlines from source'd files
3085 chomp( my @truelist =
3086 map { m/^\s*(save|source)/ ? "#$_" : $_ }
3087 @truehist );
3088 print $fh join( "\n", @truelist );
69893cff 3089 print "commands saved in $file\n";
e22ea7cc
RF
3090 }
3091 else {
ef18ae63 3092 &warn("Can't save debugger commands in '$new_fn': $!\n");
69893cff
RGS
3093 }
3094 next CMD;
ef18ae63 3095 }
69893cff 3096
7fddc82f
RF
3097=head4 C<R> - restart
3098
ef18ae63 3099Restart the debugger session.
7fddc82f
RF
3100
3101=head4 C<rerun> - rerun the current session
3102
3103Return to any given position in the B<true>-history list
3104
3105=cut
3106
3107 # R - restart execution.
3108 # rerun - controlled restart execution.
ff41e38d
SF
3109 if (my ($cmd_cmd, $cmd_params) =
3110 $cmd =~ /\A((?:R)|(?:rerun\s*(.*)))\z/) {
3111 my @args = ($cmd_cmd eq 'R' ? restart() : rerun($cmd_params));
7fddc82f 3112
ca28b541
AP
3113 # Close all non-system fds for a clean restart. A more
3114 # correct method would be to close all fds that were not
3115 # open when the process started, but this seems to be
3116 # hard. See "debugger 'R'estart and open database
3117 # connections" on p5p.
3118
47d3bbda 3119 my $max_fd = 1024; # default if POSIX can't be loaded
ca28b541 3120 if (eval { require POSIX }) {
5332cc68 3121 eval { $max_fd = POSIX::sysconf(POSIX::_SC_OPEN_MAX()) };
ca28b541
AP
3122 }
3123
3124 if (defined $max_fd) {
3125 foreach ($^F+1 .. $max_fd-1) {
3126 next unless open FD_TO_CLOSE, "<&=$_";
3127 close(FD_TO_CLOSE);
3128 }
3129 }
3130
7fddc82f
RF
3131 # And run Perl again. We use exec() to keep the
3132 # PID stable (and that way $ini_pids is still valid).
3133 exec(@args) || print $OUT "exec failed: $!\n";
3134
3135 last CMD;
ff41e38d 3136 }
7fddc82f 3137
69893cff
RGS
3138=head4 C<|, ||> - pipe output through the pager.
3139
be9a9b1d 3140For C<|>, we save C<OUT> (the debugger's output filehandle) and C<STDOUT>
69893cff
RGS
3141(the program's standard output). For C<||>, we only save C<OUT>. We open a
3142pipe to the pager (restoring the output filehandles if this fails). If this
b570d64b 3143is the C<|> command, we also set up a C<SIGPIPE> handler which will simply
69893cff
RGS
3144set C<$signal>, sending us back into the debugger.
3145
3146We then trim off the pipe symbols and C<redo> the command loop at the
3147C<PIPE> label, causing us to evaluate the command in C<$cmd> without
3148reading another.
3149
3150=cut
3151
3152 # || - run command in the pager, with output to DB::OUT.
ff41e38d 3153 if ($cmd =~ m#\A\|\|?\s*[^|]#) {
e22ea7cc
RF
3154 if ( $pager =~ /^\|/ ) {
3155
69893cff 3156 # Default pager is into a pipe. Redirect I/O.
e22ea7cc
RF
3157 open( SAVEOUT, ">&STDOUT" )
3158 || &warn("Can't save STDOUT");
3159 open( STDOUT, ">&OUT" )
3160 || &warn("Can't redirect STDOUT");
69893cff 3161 } ## end if ($pager =~ /^\|/)
e22ea7cc
RF
3162 else {
3163
69893cff 3164 # Not into a pipe. STDOUT is safe.
e22ea7cc
RF
3165 open( SAVEOUT, ">&OUT" ) || &warn("Can't save DB::OUT");
3166 }
69893cff
RGS
3167
3168 # Fix up environment to record we have less if so.
e22ea7cc
RF
3169 fix_less();
3170
3171 unless ( $piped = open( OUT, $pager ) ) {
69893cff 3172
69893cff 3173 # Couldn't open pipe to pager.
1f874cb6 3174 &warn("Can't pipe output to '$pager'");
e22ea7cc
RF
3175 if ( $pager =~ /^\|/ ) {
3176
69893cff 3177 # Redirect I/O back again.
e22ea7cc
RF
3178 open( OUT, ">&STDOUT" ) # XXX: lost message
3179 || &warn("Can't restore DB::OUT");
3180 open( STDOUT, ">&SAVEOUT" )
3181 || &warn("Can't restore STDOUT");
3182 close(SAVEOUT);
69893cff 3183 } ## end if ($pager =~ /^\|/)
e22ea7cc
RF
3184 else {
3185
69893cff 3186 # Redirect I/O. STDOUT already safe.
e22ea7cc
RF
3187 open( OUT, ">&STDOUT" ) # XXX: lost message
3188 || &warn("Can't restore DB::OUT");
3189 }
3190 next CMD;
69893cff
RGS
3191 } ## end unless ($piped = open(OUT,...
3192
3193 # Set up broken-pipe handler if necessary.
e22ea7cc
RF
3194 $SIG{PIPE} = \&DB::catch
3195 if $pager =~ /^\|/
3196 && ( "" eq $SIG{PIPE} || "DEFAULT" eq $SIG{PIPE} );
69893cff 3197
70c9432b
SF
3198 OUT->autoflush(1);
3199 # Save current filehandle, and put it back.
e22ea7cc 3200 $selected = select(OUT);
69893cff 3201 # Don't put it back if pager was a pipe.
e22ea7cc 3202 select($selected), $selected = "" unless $cmd =~ /^\|\|/;
69893cff
RGS
3203
3204 # Trim off the pipe symbols and run the command now.
ff41e38d 3205 $cmd =~ s#\A\|+\s*##;
e22ea7cc 3206 redo PIPE;
ff41e38d 3207 }
69893cff
RGS
3208
3209=head3 END OF COMMAND PARSING
3210
ff41e38d
SF
3211Anything left in C<$cmd> at this point is a Perl expression that we want to
3212evaluate. We'll always evaluate in the user's context, and fully qualify
69893cff
RGS
3213any variables we might want to address in the C<DB> package.
3214
3215=cut
3216
3217 # t - turn trace on.
ff41e38d
SF
3218 if ($cmd =~ s#\At\s+(\d+)?#\$DB::trace |= 1;\n#) {
3219 my $trace_arg = $1;
3220 $trace_to_depth = $trace_arg ? $stack_depth||0 + $1 : 1E9;
3221 }
69893cff
RGS
3222
3223 # s - single-step. Remember the last command was 's'.
ff41e38d
SF
3224 if ($cmd =~ s/\As\s/\$DB::single = 1;\n/) {
3225 $laststep = 's';
3226 }
69893cff
RGS
3227
3228 # n - single-step, but not into subs. Remember last command
e22ea7cc 3229 # was 'n'.
ff41e38d
SF
3230 if ($cmd =~ s#\An\s#\$DB::single = 2;\n#) {
3231 $laststep = 'n';
3232 }
69893cff 3233
e22ea7cc 3234 } # PIPE:
69893cff 3235
e22ea7cc 3236 # Make sure the flag that says "the debugger's running" is
69893cff 3237 # still on, to make sure we get control again.
e22ea7cc 3238 $evalarg = "\$^D = \$^D | \$DB::db_stop;\n$cmd";
69893cff
RGS
3239
3240 # Run *our* eval that executes in the caller's context.
7c54f46a 3241 DB::eval();
69893cff
RGS
3242
3243 # Turn off the one-time-dump stuff now.
e22ea7cc
RF
3244 if ($onetimeDump) {
3245 $onetimeDump = undef;
69893cff 3246 $onetimedumpDepth = undef;
e22ea7cc
RF
3247 }
3248 elsif ( $term_pid == $$ ) {
8380a245 3249 eval { # May run under miniperl, when not available...
c7e68384
IZ
3250 STDOUT->flush();
3251 STDERR->flush();
8380a245 3252 };
e22ea7cc 3253
69893cff 3254 # XXX If this is the master pid, print a newline.
8380a245 3255 print {$OUT} "\n";
e22ea7cc
RF
3256 }
3257 } ## end while (($term || &setterm...
69893cff
RGS
3258
3259=head3 POST-COMMAND PROCESSING
3260
3261After each command, we check to see if the command output was piped anywhere.
3262If so, we go through the necessary code to unhook the pipe and go back to
3263our standard filehandles for input and output.
3264
3265=cut
3266
e22ea7cc 3267 continue { # CMD:
69893cff
RGS
3268
3269 # At the end of every command:
e22ea7cc
RF
3270 if ($piped) {
3271
69893cff 3272 # Unhook the pipe mechanism now.
e22ea7cc
RF
3273 if ( $pager =~ /^\|/ ) {
3274
69893cff 3275 # No error from the child.
e22ea7cc 3276 $? = 0;
69893cff 3277
e22ea7cc
RF
3278 # we cannot warn here: the handle is missing --tchrist
3279 close(OUT) || print SAVEOUT "\nCan't close DB::OUT\n";
69893cff 3280
e22ea7cc 3281 # most of the $? crud was coping with broken cshisms
69893cff 3282 # $? is explicitly set to 0, so this never runs.
e22ea7cc 3283 if ($?) {
1f874cb6 3284 print SAVEOUT "Pager '$pager' failed: ";
e22ea7cc
RF
3285 if ( $? == -1 ) {
3286 print SAVEOUT "shell returned -1\n";
3287 }
3288 elsif ( $? >> 8 ) {
3289 print SAVEOUT ( $? & 127 )
3290 ? " (SIG#" . ( $? & 127 ) . ")"
3291 : "", ( $? & 128 ) ? " -- core dumped" : "", "\n";
3292 }
3293 else {
3294 print SAVEOUT "status ", ( $? >> 8 ), "\n";
3295 }
69893cff
RGS
3296 } ## end if ($?)
3297
e22ea7cc 3298 # Reopen filehandle for our output (if we can) and
69893cff 3299 # restore STDOUT (if we can).
e22ea7cc
RF
3300 open( OUT, ">&STDOUT" ) || &warn("Can't restore DB::OUT");
3301 open( STDOUT, ">&SAVEOUT" )
3302 || &warn("Can't restore STDOUT");
69893cff
RGS
3303
3304 # Turn off pipe exception handler if necessary.
e22ea7cc 3305 $SIG{PIPE} = "DEFAULT" if $SIG{PIPE} eq \&DB::catch;
69893cff 3306
e22ea7cc
RF
3307 # Will stop ignoring SIGPIPE if done like nohup(1)
3308 # does SIGINT but Perl doesn't give us a choice.
69893cff 3309 } ## end if ($pager =~ /^\|/)
e22ea7cc
RF
3310 else {
3311
69893cff 3312 # Non-piped "pager". Just restore STDOUT.
e22ea7cc
RF
3313 open( OUT, ">&SAVEOUT" ) || &warn("Can't restore DB::OUT");
3314 }
69893cff
RGS
3315
3316 # Close filehandle pager was using, restore the normal one
3317 # if necessary,
3318 close(SAVEOUT);
e22ea7cc 3319 select($selected), $selected = "" unless $selected eq "";
69893cff
RGS
3320
3321 # No pipes now.
e22ea7cc 3322 $piped = "";
69893cff 3323 } ## end if ($piped)
e22ea7cc 3324 } # CMD:
69893cff
RGS
3325
3326=head3 COMMAND LOOP TERMINATION
3327
3328When commands have finished executing, we come here. If the user closed the
3329input filehandle, we turn on C<$fall_off_end> to emulate a C<q> command. We
3330evaluate any post-prompt items. We restore C<$@>, C<$!>, C<$^E>, C<$,>, C<$/>,
3331C<$\>, and C<$^W>, and return a null list as expected by the Perl interpreter.
3332The interpreter will then execute the next line and then return control to us
3333again.
3334
3335=cut
3336
3337 # No more commands? Quit.
1f874cb6 3338 $fall_off_end = 1 unless defined $cmd; # Emulate 'q' on EOF
69893cff
RGS
3339
3340 # Evaluate post-prompt commands.
e22ea7cc 3341 foreach $evalarg (@$post) {
7c54f46a 3342 DB::eval();
e22ea7cc
RF
3343 }
3344 } # if ($single || $signal)
69893cff
RGS
3345
3346 # Put the user's globals back where you found them.
e22ea7cc 3347 ( $@, $!, $^E, $,, $/, $\, $^W ) = @saved;
69893cff
RGS
3348 ();
3349} ## end sub DB
3350
22fc883d
SF
3351package DB::Obj;
3352
3353sub new {
3354 my $class = shift;
3355
3356 my $self = bless {}, $class;
3357
3358 $self->_init(@_);
3359
3360 return $self;
3361}
3362
3363sub _init {
3364 my ($self, $args) = @_;
3365
3366 %{$self} = (%$self, %$args);
3367
3368 return;
3369}
3370
3371{
3372 no strict 'refs';
a4d311a3
SF
3373 foreach my $slot_name (qw(
3374 after explicit_stop infix pat position prefix i_cmd
3375 )) {
22fc883d
SF
3376 my $slot = $slot_name;
3377 *{$slot} = sub {
3378 my $self = shift;
3379
3380 if (@_) {
3381 ${ $self->{$slot} } = shift;
3382 }
3383
3384 return ${ $self->{$slot} };
3385 };
8def6eff
SF
3386
3387 *{"append_to_$slot"} = sub {
3388 my $self = shift;
3389 my $s = shift;
3390
3391 return $self->$slot($self->$slot . $s);
3392 };
22fc883d
SF
3393 }
3394}
3395
3396sub _DB_on_init__initialize_globals
3397{
3398 my $self = shift;
3399
3400 # Check for whether we should be running continuously or not.
3401 # _After_ the perl program is compiled, $single is set to 1:
ebd0282e 3402 if ( $single and not $second_time++ ) {
22fc883d
SF
3403
3404 # Options say run non-stop. Run until we get an interrupt.
ebd0282e 3405 if ($runnonstop) { # Disable until signal
22fc883d
SF
3406 # If there's any call stack in place, turn off single
3407 # stepping into subs throughout the stack.
8ad70697
SF
3408 for my $i (0 .. $stack_depth) {
3409 $stack[ $i ] &= ~1;
22fc883d
SF
3410 }
3411
3412 # And we are now no longer in single-step mode.
ebd0282e 3413 $single = 0;
22fc883d
SF
3414
3415 # If we simply returned at this point, we wouldn't get
3416 # the trace info. Fall on through.
3417 # return;
3418 } ## end if ($runnonstop)
3419
8ad70697 3420 elsif ($ImmediateStop) {
22fc883d
SF
3421
3422 # We are supposed to stop here; XXX probably a break.
8ad70697 3423 $ImmediateStop = 0; # We've processed it; turn it off
ebd0282e 3424 $signal = 1; # Simulate an interrupt to force
22fc883d
SF
3425 # us into the command loop
3426 }
3427 } ## end if ($single and not $second_time...
3428
3429 # If we're in single-step mode, or an interrupt (real or fake)
3430 # has occurred, turn off non-stop mode.
ebd0282e 3431 $runnonstop = 0 if $single or $signal;
22fc883d
SF
3432
3433 return;
3434}
3435
3436sub _DB__handle_watch_expressions
3437{
3438 my $self = shift;
3439
931ac036 3440 if ( $trace & 2 ) {
8ad70697
SF
3441 for my $n (0 .. $#to_watch) {
3442 $evalarg = $to_watch[$n];
3443 local $onetimeDump; # Tell DB::eval() to not output results
22fc883d
SF
3444
3445 # Fix context DB::eval() wants to return an array, but
3446 # we need a scalar here.
7c54f46a 3447 my ($val) = join( "', '", DB::eval() );
22fc883d
SF
3448 $val = ( ( defined $val ) ? "'$val'" : 'undef' );
3449
3450 # Did it change?
8ad70697 3451 if ( $val ne $old_watch[$n] ) {
22fc883d
SF
3452
3453 # Yep! Show the difference, and fake an interrupt.
ebd0282e 3454 $signal = 1;
8ad70697
SF
3455 print {$OUT} <<EOP;
3456Watchpoint $n:\t$to_watch[$n] changed:
3457 old value:\t$old_watch[$n]
22fc883d
SF
3458 new value:\t$val
3459EOP
8ad70697 3460 $old_watch[$n] = $val;
22fc883d
SF
3461 } ## end if ($val ne $old_watch...
3462 } ## end for my $n (0 ..
3463 } ## end if ($trace & 2)
3464
3465 return;
3466}
3467
ad46ac70
SF
3468sub _my_print_lineinfo
3469{
3470 my ($self, $i, $incr_pos) = @_;
3471
18b5b545 3472 if ($frame) {
ad46ac70 3473 # Print it indented if tracing is on.
8ad70697 3474 DB::print_lineinfo( ' ' x $stack_depth,
ad46ac70
SF
3475 "$i:\t$DB::dbline[$i]" . $self->after );
3476 }
3477 else {
3478 DB::depth_print_lineinfo($self->explicit_stop, $incr_pos);
3479 }
3480}
3481
44a07e3e 3482sub _curr_line {
18b5b545 3483 return $DB::dbline[$line];
44a07e3e
SF
3484}
3485
22fc883d
SF
3486sub _DB__grab_control
3487{
3488 my $self = shift;
3489
3490 # Yes, grab control.
7793e5c2 3491 if ($slave_editor) {
22fc883d
SF
3492
3493 # Tell the editor to update its position.
18b5b545 3494 $self->position("\032\032${DB::filename}:$line:0\n");
22fc883d
SF
3495 DB::print_lineinfo($self->position());
3496 }
3497
3498=pod
3499
3500Special check: if we're in package C<DB::fake>, we've gone through the
3501C<END> block at least once. We set up everything so that we can continue
3502to enter commands and have a valid context to be in.
3503
3504=cut
3505
3506 elsif ( $DB::package eq 'DB::fake' ) {
3507
3508 # Fallen off the end already.
3509 if (!$DB::term) {
3510 DB::setterm();
3511 }
3512
3513 DB::print_help(<<EOP);
3514Debugged program terminated. Use B<q> to quit or B<R> to restart,
3515use B<o> I<inhibit_exit> to avoid stopping after program termination,
3516B<h q>, B<h R> or B<h o> to get additional info.
3517EOP
3518
3519 # Set the DB::eval context appropriately.
3520 $DB::package = 'main';
3521 $DB::usercontext = DB::_calc_usercontext($DB::package);
3522 } ## end elsif ($package eq 'DB::fake')
3523
3524=pod
3525
3526If the program hasn't finished executing, we scan forward to the
3527next executable line, print that out, build the prompt from the file and line
3528number information, and print that.
3529
3530=cut
3531
3532 else {
3533
3534
3535 # Still somewhere in the midst of execution. Set up the
3536 # debugger prompt.
3537 $DB::sub =~ s/\'/::/; # Swap Perl 4 package separators (') to
3538 # Perl 5 ones (sorry, we don't print Klingon
3539 #module names)
3540
3541 $self->prefix($DB::sub =~ /::/ ? "" : ($DB::package . '::'));
8def6eff 3542 $self->append_to_prefix( "$DB::sub(${DB::filename}:" );
44a07e3e 3543 $self->after( $self->_curr_line =~ /\n$/ ? '' : "\n" );
22fc883d
SF
3544
3545 # Break up the prompt if it's really long.
3546 if ( length($self->prefix()) > 30 ) {
18b5b545 3547 $self->position($self->prefix . "$line):\n$line:\t" . $self->_curr_line . $self->after);
22fc883d
SF
3548 $self->prefix("");
3549 $self->infix(":\t");
3550 }
3551 else {
3552 $self->infix("):\t");
3553 $self->position(
18b5b545 3554 $self->prefix . $line. $self->infix
44a07e3e 3555 . $self->_curr_line . $self->after
22fc883d
SF
3556 );
3557 }
3558
3559 # Print current line info, indenting if necessary.
18b5b545 3560 $self->_my_print_lineinfo($line, $self->position);
22fc883d 3561
44a07e3e
SF
3562 my $i;
3563 my $line_i = sub { return $DB::dbline[$i]; };
3564
22fc883d
SF
3565 # Scan forward, stopping at either the end or the next
3566 # unbreakable line.
18b5b545 3567 for ( $i = $line + 1 ; $i <= $DB::max && $line_i->() == 0 ; ++$i )
22fc883d
SF
3568 { #{ vi
3569
3570 # Drop out on null statements, block closers, and comments.
44a07e3e 3571 last if $line_i->() =~ /^\s*[\;\}\#\n]/;
22fc883d
SF
3572
3573 # Drop out if the user interrupted us.
ebd0282e 3574 last if $signal;
22fc883d
SF
3575
3576 # Append a newline if the line doesn't have one. Can happen
3577 # in eval'ed text, for instance.
44a07e3e 3578 $self->after( $line_i->() =~ /\n$/ ? '' : "\n" );
22fc883d
SF
3579
3580 # Next executable line.
44a07e3e 3581 my $incr_pos = $self->prefix . $i . $self->infix . $line_i->()
22fc883d 3582 . $self->after;
8def6eff 3583 $self->append_to_position($incr_pos);
ad46ac70 3584 $self->_my_print_lineinfo($i, $incr_pos);
22fc883d
SF
3585 } ## end for ($i = $line + 1 ; $i...
3586 } ## end else [ if ($slave_editor)
3587
3588 return;
3589}
3590
174f9c5e
SF
3591sub _handle_t_command {
3592 if (my ($levels) = $DB::cmd =~ /\At(?:\s+(\d+))?\z/) {
931ac036 3593 $trace ^= 1;
174f9c5e 3594 local $\ = '';
8ad70697
SF
3595 $DB::trace_to_depth = $levels ? $stack_depth + $levels : 1E9;
3596 print {$OUT} "Trace = "
931ac036 3597 . ( ( $trace & 1 )
174f9c5e
SF
3598 ? ( $levels ? "on (to level $DB::trace_to_depth)" : "on" )
3599 : "off" ) . "\n";
3600 next CMD;
3601 }
3602
3603 return;
3604}
3605
9d0b71b3
SF
3606
3607sub _handle_S_command {
3608 if (my ($print_all_subs, $should_reverse, $Spatt)
3609 = $DB::cmd =~ /\AS(\s+(!)?(.+))?\z/) {
3610 # $Spatt is the pattern (if any) to use.
3611 # Reverse scan?
3612 my $Srev = defined $should_reverse;
3613 # No args - print all subs.
3614 my $Snocheck = !defined $print_all_subs;
3615
3616 # Need to make these sane here.
3617 local $\ = '';
3618 local $, = '';
3619
3620 # Search through the debugger's magical hash of subs.
3621 # If $nocheck is true, just print the sub name.
3622 # Otherwise, check it against the pattern. We then use
3623 # the XOR trick to reverse the condition as required.
3624 foreach $subname ( sort( keys %sub ) ) {
3625 if ( $Snocheck or $Srev ^ ( $subname =~ /$Spatt/ ) ) {
3626 print $OUT $subname, "\n";
3627 }
3628 }
3629 next CMD;
3630 }
3631
3632 return;
3633}
3634
1ce985d2
SF
3635sub _handle_V_command_and_X_command {
3636
3637 $DB::cmd =~ s/^X\b/V $DB::package/;
3638
3639 # Bare V commands get the currently-being-debugged package
3640 # added.
3641 if ($DB::cmd eq "V") {
3642 $DB::cmd = "V $DB::package";
3643 }
3644
3645 # V - show variables in package.
3646 if (my ($new_packname, $new_vars_str) =
3647 $DB::cmd =~ /\AV\b\s*(\S+)\s*(.*)/) {
3648
3649 # Save the currently selected filehandle and
3650 # force output to debugger's filehandle (dumpvar
3651 # just does "print" for output).
3652 my $savout = select($OUT);
3653
3654 # Grab package name and variables to dump.
3655 $packname = $new_packname;
3656 my @vars = split( ' ', $new_vars_str );
3657
3658 # If main::dumpvar isn't here, get it.
3659 do 'dumpvar.pl' || die $@ unless defined &main::dumpvar;
3660 if ( defined &main::dumpvar ) {
3661
3662 # We got it. Turn off subroutine entry/exit messages
3663 # for the moment, along with return values.
3664 local $frame = 0;
3665 local $doret = -2;
3666
3667 # must detect sigpipe failures - not catching
3668 # then will cause the debugger to die.
3669 eval {
3670 &main::dumpvar(
3671 $packname,
3672 defined $option{dumpDepth}
3673 ? $option{dumpDepth}
3674 : -1, # assume -1 unless specified
3675 @vars
3676 );
3677 };
3678
3679 # The die doesn't need to include the $@, because
3680 # it will automatically get propagated for us.
3681 if ($@) {
3682 die unless $@ =~ /dumpvar print failed/;
3683 }
3684 } ## end if (defined &main::dumpvar)
3685 else {
3686
3687 # Couldn't load dumpvar.
3688 print $OUT "dumpvar.pl not available.\n";
3689 }
3690
3691 # Restore the output filehandle, and go round again.
3692 select($savout);
3693 next CMD;
3694 }
3695
3696 return;
3697}
3698
d1450c23
SF
3699sub _handle_dash_command {
3700
3701 if ($DB::cmd eq '-') {
3702
3703 # back up by a window; go to 1 if back too far.
3704 $start -= $incr + $window + 1;
3705 $start = 1 if $start <= 0;
3706 $incr = $window - 1;
3707
3708 # Generate and execute a "l +" command (handled below).
3709 $DB::cmd = 'l ' . ($start) . '+';
3710 }
3711 return;
3712}
3713
cb9d1513
SF
3714sub _n_or_s_commands_generic {
3715 my ($self, $new_val) = @_;
73c5e526 3716 # n - next
cb9d1513 3717 next CMD if DB::_DB__is_finished();
73c5e526 3718
c