This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
up patchlevel to 73, update Changes &c.
[perl5.git] / win32 / config_H.bc
CommitLineData
08aa1457
PP
1/*
2 * This file was produced by running the config_h.SH script, which
3 * gets its values from config.sh, which is generally produced by
4 * running Configure.
5 *
6 * Feel free to modify any of this as the need arises. Note, however,
7 * that running config_h.SH again will wipe out any changes you've made.
8 * For a more permanent change edit config.sh and rerun config_h.SH.
9 *
924b3ec4 10 * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
08aa1457
PP
11 */
12
924b3ec4
GS
13/*
14 * Package name : perl5
07ba5892 15 * Source directory :
924b3ec4
GS
16 * Configuration time: undef
17 * Configured by : gsar
18 * Target system :
08aa1457
PP
19 */
20
21#ifndef _config_h_
22#define _config_h_
23
924b3ec4
GS
24/* LOC_SED:
25 * This symbol holds the complete pathname to the sed program.
08aa1457 26 */
924b3ec4 27#define LOC_SED "" /**/
08aa1457
PP
28
29/* BIN:
30 * This symbol holds the path of the bin directory where the package will
31 * be installed. Program must be prepared to deal with ~name substitution.
32 */
33/* BIN_EXP:
34 * This symbol is the filename expanded version of the BIN symbol, for
35 * programs that do not want to deal with that at run-time.
36 */
05fc92f1
GS
37#define BIN "c:\\perl\\5.00473\\bin\\MSWin32-x86" /**/
38#define BIN_EXP "c:\\perl\\5.00473\\bin\\MSWin32-x86" /**/
08aa1457
PP
39
40/* CPPSTDIN:
41 * This symbol contains the first part of the string which will invoke
42 * the C preprocessor on the standard input and produce to standard
43 * output. Typical value of "cc -E" or "/lib/cpp", but it can also
44 * call a wrapper. See CPPRUN.
45 */
46/* CPPMINUS:
47 * This symbol contains the second part of the string which will invoke
48 * the C preprocessor on the standard input and produce to standard
49 * output. This symbol will have the value "-" if CPPSTDIN needs a minus
50 * to specify standard input, otherwise the value is "".
51 */
9036c72f 52#define CPPSTDIN "cpp32 -oCON"
08aa1457
PP
53#define CPPMINUS ""
54
55/* HAS_ALARM:
56 * This symbol, if defined, indicates that the alarm routine is
57 * available.
58 */
32f822de 59/*#define HAS_ALARM /**/
08aa1457
PP
60
61/* HASATTRIBUTE:
62 * This symbol indicates the C compiler can check for function attributes,
63 * such as printf formats. This is normally only supported by GNU cc.
64 */
65/*#define HASATTRIBUTE /**/
66#ifndef HASATTRIBUTE
67#define __attribute__(_arg_)
68#endif
69
70/* HAS_BCMP:
71 * This symbol is defined if the bcmp() routine is available to
72 * compare blocks of memory.
73 */
74/*#define HAS_BCMP /**/
75
76/* HAS_BCOPY:
77 * This symbol is defined if the bcopy() routine is available to
78 * copy blocks of memory.
79 */
80/*#define HAS_BCOPY /**/
81
82/* HAS_BZERO:
83 * This symbol is defined if the bzero() routine is available to
84 * set a memory block to 0.
85 */
86/*#define HAS_BZERO /**/
87
08aa1457
PP
88/* HAS_CHOWN:
89 * This symbol, if defined, indicates that the chown routine is
90 * available.
91 */
92/*#define HAS_CHOWN /**/
93
94/* HAS_CHROOT:
95 * This symbol, if defined, indicates that the chroot routine is
96 * available.
97 */
98/*#define HAS_CHROOT /**/
99
100/* HAS_CHSIZE:
101 * This symbol, if defined, indicates that the chsize routine is available
102 * to truncate files. You might need a -lx to get this routine.
103 */
104#define HAS_CHSIZE /**/
105
08aa1457
PP
106/* HASCONST:
107 * This symbol, if defined, indicates that this C compiler knows about
108 * the const type. There is no need to actually test for that symbol
109 * within your programs. The mere use of the "const" keyword will
110 * trigger the necessary tests.
111 */
112#define HASCONST /**/
113#ifndef HASCONST
114#define const
115#endif
116
117/* HAS_CRYPT:
118 * This symbol, if defined, indicates that the crypt routine is available
119 * to encrypt passwords and the like.
120 */
121/*#define HAS_CRYPT /**/
122
123/* HAS_CUSERID:
124 * This symbol, if defined, indicates that the cuserid routine is
125 * available to get character login names.
126 */
127/*#define HAS_CUSERID /**/
128
129/* HAS_DBL_DIG:
130 * This symbol, if defined, indicates that this system's <float.h>
131 * or <limits.h> defines the symbol DBL_DIG, which is the number
132 * of significant digits in a double precision number. If this
133 * symbol is not defined, a guess of 15 is usually pretty good.
134 */
135#define HAS_DBL_DIG /**/
136
137/* HAS_DIFFTIME:
138 * This symbol, if defined, indicates that the difftime routine is
139 * available.
140 */
141#define HAS_DIFFTIME /**/
142
143/* HAS_DLERROR:
144 * This symbol, if defined, indicates that the dlerror routine is
145 * available to return a string describing the last error that
146 * occurred from a call to dlopen(), dlclose() or dlsym().
147 */
148#define HAS_DLERROR /**/
149
924b3ec4
GS
150/* SETUID_SCRIPTS_ARE_SECURE_NOW:
151 * This symbol, if defined, indicates that the bug that prevents
152 * setuid scripts from being secure is not present in this kernel.
153 */
154/* DOSUID:
155 * This symbol, if defined, indicates that the C program should
156 * check the script that it is executing for setuid/setgid bits, and
157 * attempt to emulate setuid/setgid on systems that have disabled
158 * setuid #! scripts because the kernel can't do it securely.
159 * It is up to the package designer to make sure that this emulation
160 * is done securely. Among other things, it should do an fstat on
161 * the script it just opened to make sure it really is a setuid/setgid
162 * script, it should make sure the arguments passed correspond exactly
163 * to the argument on the #! line, and it should not trust any
164 * subprocesses to which it must pass the filename rather than the
165 * file descriptor of the script to be executed.
166 */
167/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
168/*#define DOSUID /**/
169
08aa1457
PP
170/* HAS_DUP2:
171 * This symbol, if defined, indicates that the dup2 routine is
172 * available to duplicate file descriptors.
173 */
174#define HAS_DUP2 /**/
175
176/* HAS_FCHMOD:
177 * This symbol, if defined, indicates that the fchmod routine is available
178 * to change mode of opened files. If unavailable, use chmod().
179 */
180/*#define HAS_FCHMOD /**/
181
182/* HAS_FCHOWN:
183 * This symbol, if defined, indicates that the fchown routine is available
184 * to change ownership of opened files. If unavailable, use chown().
185 */
186/*#define HAS_FCHOWN /**/
187
188/* HAS_FCNTL:
189 * This symbol, if defined, indicates to the C program that
190 * the fcntl() function exists.
191 */
192/*#define HAS_FCNTL /**/
193
194/* HAS_FGETPOS:
195 * This symbol, if defined, indicates that the fgetpos routine is
196 * available to get the file position indicator, similar to ftell().
197 */
198#define HAS_FGETPOS /**/
199
200/* FLEXFILENAMES:
201 * This symbol, if defined, indicates that the system supports filenames
202 * longer than 14 characters.
203 */
204#define FLEXFILENAMES /**/
205
206/* HAS_FLOCK:
207 * This symbol, if defined, indicates that the flock routine is
208 * available to do file locking.
209 */
210#define HAS_FLOCK /**/
211
212/* HAS_FORK:
213 * This symbol, if defined, indicates that the fork routine is
214 * available.
215 */
216/*#define HAS_FORK /**/
217
218/* HAS_FSETPOS:
219 * This symbol, if defined, indicates that the fsetpos routine is
220 * available to set the file position indicator, similar to fseek().
221 */
222#define HAS_FSETPOS /**/
223
224/* HAS_GETTIMEOFDAY:
225 * This symbol, if defined, indicates that the gettimeofday() system
226 * call is available for a sub-second accuracy clock. Usually, the file
227 * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
228 * The type "Timeval" should be used to refer to "struct timeval".
229 */
230/*#define HAS_GETTIMEOFDAY /**/
231#ifdef HAS_GETTIMEOFDAY
232#define Timeval struct timeval /* Structure used by gettimeofday() */
233#endif
234
235/* HAS_GETGROUPS:
236 * This symbol, if defined, indicates that the getgroups() routine is
237 * available to get the list of process groups. If unavailable, multiple
238 * groups are probably not supported.
239 */
08aa1457 240/*#define HAS_GETGROUPS /**/
08aa1457 241
08aa1457
PP
242/* HAS_UNAME:
243 * This symbol, if defined, indicates that the C program may use the
244 * uname() routine to derive the host name. See also HAS_GETHOSTNAME
245 * and PHOSTNAME.
246 */
247/*#define HAS_UNAME /**/
248
249/* HAS_GETLOGIN:
250 * This symbol, if defined, indicates that the getlogin routine is
251 * available to get the login name.
252 */
e34ffe5a 253#define HAS_GETLOGIN /**/
08aa1457 254
924b3ec4
GS
255/* HAS_GETPGID:
256 * This symbol, if defined, indicates to the C program that
257 * the getpgid(pid) function is available to get the
258 * process group id.
259 */
260/*#define HAS_GETPGID /**/
261
262/* HAS_GETPGRP:
263 * This symbol, if defined, indicates that the getpgrp routine is
264 * available to get the current process group.
265 */
266/* USE_BSD_GETPGRP:
267 * This symbol, if defined, indicates that getpgrp needs one
268 * arguments whereas USG one needs none.
269 */
270/*#define HAS_GETPGRP /**/
271/*#define USE_BSD_GETPGRP /**/
272
08aa1457
PP
273/* HAS_GETPGRP2:
274 * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
275 * routine is available to get the current process group.
276 */
277/*#define HAS_GETPGRP2 /**/
278
279/* HAS_GETPPID:
280 * This symbol, if defined, indicates that the getppid routine is
281 * available to get the parent process ID.
282 */
283/*#define HAS_GETPPID /**/
284
285/* HAS_GETPRIORITY:
286 * This symbol, if defined, indicates that the getpriority routine is
287 * available to get a process's priority.
288 */
289/*#define HAS_GETPRIORITY /**/
290
291/* HAS_HTONL:
292 * This symbol, if defined, indicates that the htonl() routine (and
293 * friends htons() ntohl() ntohs()) are available to do network
294 * order byte swapping.
295 */
296/* HAS_HTONS:
297 * This symbol, if defined, indicates that the htons() routine (and
298 * friends htonl() ntohl() ntohs()) are available to do network
299 * order byte swapping.
300 */
301/* HAS_NTOHL:
302 * This symbol, if defined, indicates that the ntohl() routine (and
303 * friends htonl() htons() ntohs()) are available to do network
304 * order byte swapping.
305 */
306/* HAS_NTOHS:
307 * This symbol, if defined, indicates that the ntohs() routine (and
308 * friends htonl() htons() ntohl()) are available to do network
309 * order byte swapping.
310 */
311#define HAS_HTONL /**/
312#define HAS_HTONS /**/
313#define HAS_NTOHL /**/
314#define HAS_NTOHS /**/
315
924b3ec4
GS
316/* HAS_INET_ATON:
317 * This symbol, if defined, indicates to the C program that the
318 * inet_aton() function is available to parse IP address "dotted-quad"
319 * strings.
08aa1457 320 */
924b3ec4 321/*#define HAS_INET_ATON /**/
08aa1457
PP
322
323/* HAS_KILLPG:
324 * This symbol, if defined, indicates that the killpg routine is available
325 * to kill process groups. If unavailable, you probably should use kill
326 * with a negative process number.
327 */
328/*#define HAS_KILLPG /**/
329
330/* HAS_LINK:
331 * This symbol, if defined, indicates that the link routine is
332 * available to create hard links.
333 */
334/*#define HAS_LINK /**/
335
336/* HAS_LOCALECONV:
337 * This symbol, if defined, indicates that the localeconv routine is
338 * available for numeric and monetary formatting conventions.
339 */
340#define HAS_LOCALECONV /**/
341
342/* HAS_LOCKF:
343 * This symbol, if defined, indicates that the lockf routine is
344 * available to do file locking.
345 */
346/*#define HAS_LOCKF /**/
347
348/* HAS_LSTAT:
349 * This symbol, if defined, indicates that the lstat routine is
350 * available to do file stats on symbolic links.
351 */
352/*#define HAS_LSTAT /**/
353
354/* HAS_MBLEN:
355 * This symbol, if defined, indicates that the mblen routine is available
356 * to find the number of bytes in a multibye character.
357 */
358#define HAS_MBLEN /**/
359
360/* HAS_MBSTOWCS:
361 * This symbol, if defined, indicates that the mbstowcs routine is
362 * available to covert a multibyte string into a wide character string.
363 */
364#define HAS_MBSTOWCS /**/
365
366/* HAS_MBTOWC:
367 * This symbol, if defined, indicates that the mbtowc routine is available
368 * to covert a multibyte to a wide character.
369 */
370#define HAS_MBTOWC /**/
371
372/* HAS_MEMCMP:
373 * This symbol, if defined, indicates that the memcmp routine is available
374 * to compare blocks of memory.
375 */
376#define HAS_MEMCMP /**/
377
378/* HAS_MEMCPY:
379 * This symbol, if defined, indicates that the memcpy routine is available
380 * to copy blocks of memory.
381 */
382#define HAS_MEMCPY /**/
383
384/* HAS_MEMMOVE:
385 * This symbol, if defined, indicates that the memmove routine is available
386 * to copy potentially overlapping blocks of memory. This should be used
387 * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
388 * own version.
389 */
390#define HAS_MEMMOVE /**/
391
392/* HAS_MEMSET:
393 * This symbol, if defined, indicates that the memset routine is available
394 * to set blocks of memory.
395 */
396#define HAS_MEMSET /**/
397
398/* HAS_MKDIR:
399 * This symbol, if defined, indicates that the mkdir routine is available
400 * to create directories. Otherwise you should fork off a new process to
401 * exec /bin/mkdir.
402 */
403#define HAS_MKDIR /**/
404
405/* HAS_MKFIFO:
406 * This symbol, if defined, indicates that the mkfifo routine is
407 * available to create FIFOs. Otherwise, mknod should be able to
408 * do it for you. However, if mkfifo is there, mknod might require
409 * super-user privileges which mkfifo will not.
410 */
411/*#define HAS_MKFIFO /**/
412
413/* HAS_MKTIME:
414 * This symbol, if defined, indicates that the mktime routine is
415 * available.
416 */
417#define HAS_MKTIME /**/
418
419/* HAS_MSG:
420 * This symbol, if defined, indicates that the entire msg*(2) library is
421 * supported (IPC mechanism based on message queues).
422 */
423/*#define HAS_MSG /**/
424
425/* HAS_NICE:
426 * This symbol, if defined, indicates that the nice routine is
427 * available.
428 */
429/*#define HAS_NICE /**/
430
08aa1457
PP
431/* HAS_PATHCONF:
432 * This symbol, if defined, indicates that pathconf() is available
433 * to determine file-system related limits and options associated
434 * with a given filename.
435 */
436/* HAS_FPATHCONF:
437 * This symbol, if defined, indicates that pathconf() is available
438 * to determine file-system related limits and options associated
439 * with a given open file descriptor.
440 */
441/*#define HAS_PATHCONF /**/
442/*#define HAS_FPATHCONF /**/
443
444/* HAS_PAUSE:
445 * This symbol, if defined, indicates that the pause routine is
446 * available to suspend a process until a signal is received.
447 */
448#define HAS_PAUSE /**/
449
450/* HAS_PIPE:
451 * This symbol, if defined, indicates that the pipe routine is
452 * available to create an inter-process channel.
453 */
454#define HAS_PIPE /**/
455
456/* HAS_POLL:
457 * This symbol, if defined, indicates that the poll routine is
924b3ec4
GS
458 * available to poll active file descriptors. You may safely
459 * include <poll.h> when this symbol is defined.
08aa1457
PP
460 */
461/*#define HAS_POLL /**/
462
463/* HAS_READDIR:
464 * This symbol, if defined, indicates that the readdir routine is
465 * available to read directory entries. You may have to include
466 * <dirent.h>. See I_DIRENT.
467 */
468#define HAS_READDIR /**/
469
470/* HAS_SEEKDIR:
471 * This symbol, if defined, indicates that the seekdir routine is
472 * available. You may have to include <dirent.h>. See I_DIRENT.
473 */
474#define HAS_SEEKDIR /**/
475
476/* HAS_TELLDIR:
477 * This symbol, if defined, indicates that the telldir routine is
478 * available. You may have to include <dirent.h>. See I_DIRENT.
479 */
480#define HAS_TELLDIR /**/
481
482/* HAS_REWINDDIR:
483 * This symbol, if defined, indicates that the rewinddir routine is
484 * available. You may have to include <dirent.h>. See I_DIRENT.
485 */
486#define HAS_REWINDDIR /**/
487
488/* HAS_READLINK:
489 * This symbol, if defined, indicates that the readlink routine is
490 * available to read the value of a symbolic link.
491 */
492/*#define HAS_READLINK /**/
493
494/* HAS_RENAME:
495 * This symbol, if defined, indicates that the rename routine is available
496 * to rename files. Otherwise you should do the unlink(), link(), unlink()
497 * trick.
498 */
499#define HAS_RENAME /**/
500
501/* HAS_RMDIR:
502 * This symbol, if defined, indicates that the rmdir routine is
503 * available to remove directories. Otherwise you should fork off a
504 * new process to exec /bin/rmdir.
505 */
506#define HAS_RMDIR /**/
507
08aa1457
PP
508/* HAS_SELECT:
509 * This symbol, if defined, indicates that the select routine is
510 * available to select active file descriptors. If the timeout field
511 * is used, <sys/time.h> may need to be included.
512 */
513#define HAS_SELECT /**/
514
515/* HAS_SEM:
516 * This symbol, if defined, indicates that the entire sem*(2) library is
517 * supported.
518 */
519/*#define HAS_SEM /**/
520
521/* HAS_SETEGID:
522 * This symbol, if defined, indicates that the setegid routine is available
523 * to change the effective gid of the current program.
524 */
525/*#define HAS_SETEGID /**/
526
527/* HAS_SETEUID:
528 * This symbol, if defined, indicates that the seteuid routine is available
529 * to change the effective uid of the current program.
530 */
531/*#define HAS_SETEUID /**/
532
533/* HAS_SETLINEBUF:
534 * This symbol, if defined, indicates that the setlinebuf routine is
535 * available to change stderr or stdout from block-buffered or unbuffered
536 * to a line-buffered mode.
537 */
538/*#define HAS_SETLINEBUF /**/
539
540/* HAS_SETLOCALE:
541 * This symbol, if defined, indicates that the setlocale routine is
542 * available to handle locale-specific ctype implementations.
543 */
544#define HAS_SETLOCALE /**/
545
924b3ec4
GS
546/* HAS_SETPGID:
547 * This symbol, if defined, indicates that the setpgid(pid, gpid)
548 * routine is available to set process group ID.
549 */
550/*#define HAS_SETPGID /**/
551
552/* HAS_SETPGRP:
553 * This symbol, if defined, indicates that the setpgrp routine is
554 * available to set the current process group.
555 */
556/* USE_BSD_SETPGRP:
557 * This symbol, if defined, indicates that setpgrp needs two
558 * arguments whereas USG one needs none. See also HAS_SETPGID
559 * for a POSIX interface.
560 */
561/*#define HAS_SETPGRP /**/
562/*#define USE_BSD_SETPGRP /**/
563
08aa1457
PP
564/* HAS_SETPGRP2:
565 * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
566 * routine is available to set the current process group.
567 */
568/*#define HAS_SETPGRP2 /**/
569
570/* HAS_SETPRIORITY:
571 * This symbol, if defined, indicates that the setpriority routine is
572 * available to set a process's priority.
573 */
574/*#define HAS_SETPRIORITY /**/
575
576/* HAS_SETREGID:
577 * This symbol, if defined, indicates that the setregid routine is
578 * available to change the real and effective gid of the current
579 * process.
580 */
581/* HAS_SETRESGID:
582 * This symbol, if defined, indicates that the setresgid routine is
583 * available to change the real, effective and saved gid of the current
584 * process.
585 */
586/*#define HAS_SETREGID /**/
587/*#define HAS_SETRESGID /**/
588
589/* HAS_SETREUID:
590 * This symbol, if defined, indicates that the setreuid routine is
591 * available to change the real and effective uid of the current
592 * process.
593 */
594/* HAS_SETRESUID:
595 * This symbol, if defined, indicates that the setresuid routine is
596 * available to change the real, effective and saved uid of the current
597 * process.
598 */
599/*#define HAS_SETREUID /**/
600/*#define HAS_SETRESUID /**/
601
602/* HAS_SETRGID:
603 * This symbol, if defined, indicates that the setrgid routine is available
604 * to change the real gid of the current program.
605 */
606/*#define HAS_SETRGID /**/
607
608/* HAS_SETRUID:
609 * This symbol, if defined, indicates that the setruid routine is available
610 * to change the real uid of the current program.
611 */
612/*#define HAS_SETRUID /**/
613
614/* HAS_SETSID:
615 * This symbol, if defined, indicates that the setsid routine is
616 * available to set the process group ID.
617 */
618/*#define HAS_SETSID /**/
619
620/* HAS_SHM:
621 * This symbol, if defined, indicates that the entire shm*(2) library is
622 * supported.
623 */
624/*#define HAS_SHM /**/
625
626/* Shmat_t:
627 * This symbol holds the return type of the shmat() system call.
628 * Usually set to 'void *' or 'char *'.
629 */
630/* HAS_SHMAT_PROTOTYPE:
631 * This symbol, if defined, indicates that the sys/shm.h includes
632 * a prototype for shmat(). Otherwise, it is up to the program to
633 * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
634 * but not always right so it should be emitted by the program only
635 * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
636 */
637#define Shmat_t void * /**/
638/*#define HAS_SHMAT_PROTOTYPE /**/
639
08aa1457
PP
640/* USE_STAT_BLOCKS:
641 * This symbol is defined if this system has a stat structure declaring
642 * st_blksize and st_blocks.
643 */
644/*#define USE_STAT_BLOCKS /**/
645
924b3ec4
GS
646/* HAS_STRCHR:
647 * This symbol is defined to indicate that the strchr()/strrchr()
648 * functions are available for string searching. If not, try the
649 * index()/rindex() pair.
08aa1457 650 */
924b3ec4
GS
651/* HAS_INDEX:
652 * This symbol is defined to indicate that the index()/rindex()
653 * functions are available for string searching.
08aa1457 654 */
924b3ec4
GS
655#define HAS_STRCHR /**/
656/*#define HAS_INDEX /**/
657
658/* HAS_STRCOLL:
659 * This symbol, if defined, indicates that the strcoll routine is
660 * available to compare strings using collating information.
08aa1457 661 */
924b3ec4
GS
662#define HAS_STRCOLL /**/
663
664/* USE_STRUCT_COPY:
665 * This symbol, if defined, indicates that this C compiler knows how
666 * to copy structures. If undefined, you'll need to use a block copy
667 * routine of some sort instead.
08aa1457 668 */
924b3ec4 669#define USE_STRUCT_COPY /**/
08aa1457
PP
670
671/* HAS_STRERROR:
672 * This symbol, if defined, indicates that the strerror routine is
673 * available to translate error numbers to strings. See the writeup
674 * of Strerror() in this file before you try to define your own.
675 */
676/* HAS_SYS_ERRLIST:
677 * This symbol, if defined, indicates that the sys_errlist array is
678 * available to translate error numbers to strings. The extern int
679 * sys_nerr gives the size of that table.
680 */
681/* Strerror:
682 * This preprocessor symbol is defined as a macro if strerror() is
683 * not available to translate error numbers to strings but sys_errlist[]
684 * array is there.
685 */
686#define HAS_STRERROR /**/
687#define HAS_SYS_ERRLIST /**/
688#define Strerror(e) strerror(e)
689
690/* HAS_STRTOD:
691 * This symbol, if defined, indicates that the strtod routine is
692 * available to provide better numeric string conversion than atof().
693 */
694#define HAS_STRTOD /**/
695
696/* HAS_STRTOL:
697 * This symbol, if defined, indicates that the strtol routine is available
698 * to provide better numeric string conversion than atoi() and friends.
699 */
700#define HAS_STRTOL /**/
701
702/* HAS_STRTOUL:
703 * This symbol, if defined, indicates that the strtoul routine is
704 * available to provide conversion of strings to unsigned long.
705 */
706#define HAS_STRTOUL /**/
707
708/* HAS_STRXFRM:
709 * This symbol, if defined, indicates that the strxfrm() routine is
710 * available to transform strings.
711 */
712#define HAS_STRXFRM /**/
713
714/* HAS_SYMLINK:
715 * This symbol, if defined, indicates that the symlink routine is available
716 * to create symbolic links.
717 */
718/*#define HAS_SYMLINK /**/
719
720/* HAS_SYSCALL:
721 * This symbol, if defined, indicates that the syscall routine is
722 * available to call arbitrary system calls. If undefined, that's tough.
723 */
724/*#define HAS_SYSCALL /**/
725
726/* HAS_SYSCONF:
727 * This symbol, if defined, indicates that sysconf() is available
728 * to determine system related limits and options.
729 */
730/*#define HAS_SYSCONF /**/
731
732/* HAS_SYSTEM:
733 * This symbol, if defined, indicates that the system routine is
734 * available to issue a shell command.
735 */
736#define HAS_SYSTEM /**/
737
738/* HAS_TCGETPGRP:
739 * This symbol, if defined, indicates that the tcgetpgrp routine is
740 * available to get foreground process group ID.
741 */
742/*#define HAS_TCGETPGRP /**/
743
744/* HAS_TCSETPGRP:
745 * This symbol, if defined, indicates that the tcsetpgrp routine is
746 * available to set foreground process group ID.
747 */
748/*#define HAS_TCSETPGRP /**/
749
08aa1457
PP
750/* HAS_TRUNCATE:
751 * This symbol, if defined, indicates that the truncate routine is
752 * available to truncate files.
753 */
754/*#define HAS_TRUNCATE /**/
755
756/* HAS_TZNAME:
757 * This symbol, if defined, indicates that the tzname[] array is
758 * available to access timezone names.
759 */
760#define HAS_TZNAME /**/
761
762/* HAS_UMASK:
763 * This symbol, if defined, indicates that the umask routine is
764 * available to set and get the value of the file creation mask.
765 */
766#define HAS_UMASK /**/
767
768/* HAS_VFORK:
769 * This symbol, if defined, indicates that vfork() exists.
770 */
771/*#define HAS_VFORK /**/
772
08aa1457
PP
773/* HASVOLATILE:
774 * This symbol, if defined, indicates that this C compiler knows about
775 * the volatile declaration.
776 */
777#define HASVOLATILE /**/
778#ifndef HASVOLATILE
779#define volatile
780#endif
781
08aa1457
PP
782/* HAS_WAIT4:
783 * This symbol, if defined, indicates that wait4() exists.
784 */
785/*#define HAS_WAIT4 /**/
786
787/* HAS_WAITPID:
788 * This symbol, if defined, indicates that the waitpid routine is
789 * available to wait for child process.
790 */
f55ee38a 791#define HAS_WAITPID /**/
08aa1457
PP
792
793/* HAS_WCSTOMBS:
794 * This symbol, if defined, indicates that the wcstombs routine is
795 * available to convert wide character strings to multibyte strings.
796 */
797#define HAS_WCSTOMBS /**/
798
799/* HAS_WCTOMB:
800 * This symbol, if defined, indicates that the wctomb routine is available
801 * to covert a wide character to a multibyte.
802 */
803#define HAS_WCTOMB /**/
804
28e8609d
JH
805/* I_ARPA_INET:
806 * This symbol, if defined, indicates that <arpa/inet.h> exists and should
807 * be included.
808 */
9036c72f 809/*#define I_ARPA_INET /**/
28e8609d 810
924b3ec4
GS
811/* I_DBM:
812 * This symbol, if defined, indicates that <dbm.h> exists and should
813 * be included.
08aa1457 814 */
924b3ec4
GS
815/* I_RPCSVC_DBM:
816 * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
817 * should be included.
08aa1457 818 */
924b3ec4
GS
819/*#define I_DBM /**/
820#define I_RPCSVC_DBM /**/
08aa1457
PP
821
822/* I_DIRENT:
823 * This symbol, if defined, indicates to the C program that it should
824 * include <dirent.h>. Using this symbol also triggers the definition
825 * of the Direntry_t define which ends up being 'struct dirent' or
826 * 'struct direct' depending on the availability of <dirent.h>.
827 */
828/* DIRNAMLEN:
829 * This symbol, if defined, indicates to the C program that the length
830 * of directory entry names is provided by a d_namlen field. Otherwise
831 * you need to do strlen() on the d_name field.
832 */
833/* Direntry_t:
834 * This symbol is set to 'struct direct' or 'struct dirent' depending on
835 * whether dirent is available or not. You should use this pseudo type to
836 * portably declare your directory entries.
837 */
838#define I_DIRENT /**/
839#define DIRNAMLEN /**/
840#define Direntry_t struct direct
841
842/* I_DLFCN:
843 * This symbol, if defined, indicates that <dlfcn.h> exists and should
844 * be included.
845 */
846#define I_DLFCN /**/
847
848/* I_FCNTL:
849 * This manifest constant tells the C program to include <fcntl.h>.
850 */
851#define I_FCNTL /**/
852
853/* I_FLOAT:
854 * This symbol, if defined, indicates to the C program that it should
855 * include <float.h> to get definition of symbols like DBL_MAX or
856 * DBL_MIN, i.e. machine dependent floating point values.
857 */
858#define I_FLOAT /**/
859
860/* I_GRP:
861 * This symbol, if defined, indicates to the C program that it should
862 * include <grp.h>.
863 */
28e8609d
JH
864/* GRPASSWD:
865 * This symbol, if defined, indicates to the C program that struct group
866 * contains gr_passwd.
867 */
868/* HAS_SETGRENT:
869 * This symbol, if defined, indicates that the getgrent routine is
870 * available for initializing sequential access of the group database.
871 */
872/* HAS_GETGRENT:
873 * This symbol, if defined, indicates that the getgrent routine is
874 * available for sequential access of the group database.
875 */
876/* HAS_ENDGRENT:
877 * This symbol, if defined, indicates that the getgrent routine is
878 * available for finalizing sequential access of the group database.
879 */
880/*#define I_GRP /**/
881/*#define GRPASSWD /**/
882/*#define HAS_SETGRENT /**/
883/*#define HAS_GETGRENT /**/
884/*#define HAS_ENDGRENT /**/
08aa1457
PP
885
886/* I_LIMITS:
887 * This symbol, if defined, indicates to the C program that it should
888 * include <limits.h> to get definition of symbols like WORD_BIT or
889 * LONG_MAX, i.e. machine dependant limitations.
890 */
891#define I_LIMITS /**/
892
924b3ec4
GS
893/* I_LOCALE:
894 * This symbol, if defined, indicates to the C program that it should
895 * include <locale.h>.
896 */
897#define I_LOCALE /**/
898
08aa1457
PP
899/* I_MATH:
900 * This symbol, if defined, indicates to the C program that it should
901 * include <math.h>.
902 */
903#define I_MATH /**/
904
905/* I_MEMORY:
906 * This symbol, if defined, indicates to the C program that it should
907 * include <memory.h>.
908 */
909/*#define I_MEMORY /**/
910
911/* I_NDBM:
912 * This symbol, if defined, indicates that <ndbm.h> exists and should
913 * be included.
914 */
915/*#define I_NDBM /**/
916
917/* I_NET_ERRNO:
918 * This symbol, if defined, indicates that <net/errno.h> exists and
919 * should be included.
920 */
921/*#define I_NET_ERRNO /**/
922
923/* I_NETINET_IN:
924 * This symbol, if defined, indicates to the C program that it should
925 * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
926 */
927/*#define I_NETINET_IN /**/
928
924b3ec4
GS
929/* I_SFIO:
930 * This symbol, if defined, indicates to the C program that it should
931 * include <sfio.h>.
932 */
933/*#define I_SFIO /**/
934
08aa1457
PP
935/* I_STDDEF:
936 * This symbol, if defined, indicates that <stddef.h> exists and should
937 * be included.
938 */
939#define I_STDDEF /**/
940
941/* I_STDLIB:
942 * This symbol, if defined, indicates that <stdlib.h> exists and should
943 * be included.
944 */
945#define I_STDLIB /**/
946
947/* I_STRING:
948 * This symbol, if defined, indicates to the C program that it should
949 * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
950 */
951#define I_STRING /**/
952
953/* I_SYS_DIR:
954 * This symbol, if defined, indicates to the C program that it should
955 * include <sys/dir.h>.
956 */
957/*#define I_SYS_DIR /**/
958
959/* I_SYS_FILE:
960 * This symbol, if defined, indicates to the C program that it should
961 * include <sys/file.h> to get definition of R_OK and friends.
962 */
963/*#define I_SYS_FILE /**/
964
965/* I_SYS_IOCTL:
966 * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
967 * be included. Otherwise, include <sgtty.h> or <termio.h>.
968 */
969/*#define I_SYS_IOCTL /**/
970
971/* I_SYS_NDIR:
972 * This symbol, if defined, indicates to the C program that it should
973 * include <sys/ndir.h>.
974 */
975/*#define I_SYS_NDIR /**/
976
977/* I_SYS_PARAM:
978 * This symbol, if defined, indicates to the C program that it should
979 * include <sys/param.h>.
980 */
981/*#define I_SYS_PARAM /**/
982
983/* I_SYS_RESOURCE:
984 * This symbol, if defined, indicates to the C program that it should
985 * include <sys/resource.h>.
986 */
987/*#define I_SYS_RESOURCE /**/
988
989/* I_SYS_SELECT:
990 * This symbol, if defined, indicates to the C program that it should
991 * include <sys/select.h> in order to get definition of struct timeval.
992 */
993/*#define I_SYS_SELECT /**/
994
924b3ec4
GS
995/* I_SYS_STAT:
996 * This symbol, if defined, indicates to the C program that it should
997 * include <sys/stat.h>.
998 */
999#define I_SYS_STAT /**/
1000
08aa1457
PP
1001/* I_SYS_TIMES:
1002 * This symbol, if defined, indicates to the C program that it should
1003 * include <sys/times.h>.
1004 */
1005/*#define I_SYS_TIMES /**/
1006
be44fb0e
GS
1007/* I_SYS_TYPES:
1008 * This symbol, if defined, indicates to the C program that it should
1009 * include <sys/types.h>.
1010 */
1011#define I_SYS_TYPES /**/
1012
08aa1457
PP
1013/* I_SYS_UN:
1014 * This symbol, if defined, indicates to the C program that it should
1015 * include <sys/un.h> to get UNIX domain socket definitions.
1016 */
1017/*#define I_SYS_UN /**/
1018
1019/* I_SYS_WAIT:
1020 * This symbol, if defined, indicates to the C program that it should
1021 * include <sys/wait.h>.
1022 */
1023/*#define I_SYS_WAIT /**/
1024
1025/* I_TERMIO:
1026 * This symbol, if defined, indicates that the program should include
1027 * <termio.h> rather than <sgtty.h>. There are also differences in
1028 * the ioctl() calls that depend on the value of this symbol.
1029 */
1030/* I_TERMIOS:
1031 * This symbol, if defined, indicates that the program should include
1032 * the POSIX termios.h rather than sgtty.h or termio.h.
1033 * There are also differences in the ioctl() calls that depend on the
1034 * value of this symbol.
1035 */
1036/* I_SGTTY:
1037 * This symbol, if defined, indicates that the program should include
1038 * <sgtty.h> rather than <termio.h>. There are also differences in
1039 * the ioctl() calls that depend on the value of this symbol.
1040 */
1041/*#define I_TERMIO /**/
1042/*#define I_TERMIOS /**/
1043/*#define I_SGTTY /**/
1044
08aa1457
PP
1045/* I_UNISTD:
1046 * This symbol, if defined, indicates to the C program that it should
1047 * include <unistd.h>.
1048 */
1049/*#define I_UNISTD /**/
1050
1051/* I_UTIME:
1052 * This symbol, if defined, indicates to the C program that it should
1053 * include <utime.h>.
1054 */
1055#define I_UTIME /**/
1056
924b3ec4
GS
1057/* I_VALUES:
1058 * This symbol, if defined, indicates to the C program that it should
1059 * include <values.h> to get definition of symbols like MINFLOAT or
1060 * MAXLONG, i.e. machine dependant limitations. Probably, you
1061 * should use <limits.h> instead, if it is available.
1062 */
1063/*#define I_VALUES /**/
1064
08aa1457
PP
1065/* I_STDARG:
1066 * This symbol, if defined, indicates that <stdarg.h> exists and should
1067 * be included.
1068 */
1069/* I_VARARGS:
1070 * This symbol, if defined, indicates to the C program that it should
1071 * include <varargs.h>.
1072 */
1073#define I_STDARG /**/
1074/*#define I_VARARGS /**/
1075
1076/* I_VFORK:
1077 * This symbol, if defined, indicates to the C program that it should
1078 * include vfork.h.
1079 */
1080/*#define I_VFORK /**/
1081
08aa1457
PP
1082/* CAN_PROTOTYPE:
1083 * If defined, this macro indicates that the C compiler can handle
1084 * function prototypes.
1085 */
1086/* _:
1087 * This macro is used to declare function parameters for folks who want
1088 * to make declarations with prototypes using a different style than
1089 * the above macros. Use double parentheses. For example:
1090 *
1091 * int main _((int argc, char *argv[]));
1092 */
1093#define CAN_PROTOTYPE /**/
1094#ifdef CAN_PROTOTYPE
1095#define _(args) args
1096#else
1097#define _(args) ()
1098#endif
1099
924b3ec4
GS
1100/* SH_PATH:
1101 * This symbol contains the full pathname to the shell used on this
1102 * on this system to execute Bourne shell scripts. Usually, this will be
1103 * /bin/sh, though it's possible that some systems will have /bin/ksh,
1104 * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
1105 * D:/bin/sh.exe.
08aa1457 1106 */
924b3ec4 1107#define SH_PATH "cmd /x /c" /**/
08aa1457 1108
08aa1457
PP
1109/* STDCHAR:
1110 * This symbol is defined to be the type of char used in stdio.h.
1111 * It has the values "unsigned char" or "char".
1112 */
1113#define STDCHAR unsigned char /**/
1114
924b3ec4
GS
1115/* MEM_ALIGNBYTES:
1116 * This symbol contains the number of bytes required to align a
1117 * double. Usual values are 2, 4 and 8.
1118 * On NeXT starting with 3.2, you can build "Fat" Multiple Architecture
1119 * Binaries (MAB) for targets with varying alignment. This only matters
1120 * for perl, where the config.h can be generated and installed on one
1121 * system, and used by a different architecture to build an extension.
1122 * The default is eight, for safety.
08aa1457 1123 */
924b3ec4 1124#define MEM_ALIGNBYTES 8 /**/
08aa1457
PP
1125
1126/* BYTEORDER:
1127 * This symbol holds the hexadecimal constant defined in byteorder,
1128 * i.e. 0x1234 or 0x4321, etc...
1129 * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
1130 * Binaries (MAB) on either big endian or little endian machines.
1131 * The endian-ness is available at compile-time. This only matters
1132 * for perl, where the config.h can be generated and installed on
1133 * one system, and used by a different architecture to build an
1134 * extension. Older versions of NeXT that might not have
1135 * defined either *_ENDIAN__ were all on Motorola 680x0 series,
1136 * so the default case (for NeXT) is big endian to catch them.
1137 * This might matter for NeXT 3.0.
1138 */
1139#ifndef NeXT
1140#define BYTEORDER 0x1234 /* large digits for MSB */
1141#else /* NeXT */
1142#ifdef __LITTLE_ENDIAN__
1143#define BYTEORDER 0x1234
1144#else /* __BIG_ENDIAN__ */
1145#define BYTEORDER 0x4321
1146#endif /* ENDIAN CHECK */
1147#endif /* NeXT */
1148
924b3ec4
GS
1149/* CASTI32:
1150 * This symbol is defined if the C compiler can cast negative
1151 * or large floating point numbers to 32-bit ints.
08aa1457 1152 */
924b3ec4 1153#define CASTI32 /**/
08aa1457 1154
924b3ec4
GS
1155/* CASTNEGFLOAT:
1156 * This symbol is defined if the C compiler can cast negative
1157 * numbers to unsigned longs, ints and shorts.
08aa1457 1158 */
924b3ec4
GS
1159/* CASTFLAGS:
1160 * This symbol contains flags that say what difficulties the compiler
1161 * has casting odd floating values to unsigned long:
1162 * 0 = ok
1163 * 1 = couldn't cast < 0
1164 * 2 = couldn't cast >= 0x80000000
1165 * 4 = couldn't cast in argument expression list
08aa1457 1166 */
924b3ec4
GS
1167#define CASTNEGFLOAT /**/
1168#define CASTFLAGS 0 /**/
1169
1170/* VOID_CLOSEDIR:
1171 * This symbol, if defined, indicates that the closedir() routine
1172 * does not return a value.
08aa1457 1173 */
924b3ec4 1174/*#define VOID_CLOSEDIR /**/
08aa1457
PP
1175
1176/* Gconvert:
1177 * This preprocessor macro is defined to convert a floating point
1178 * number to a string without a trailing decimal point. This
1179 * emulates the behavior of sprintf("%g"), but is sometimes much more
1180 * efficient. If gconvert() is not available, but gcvt() drops the
1181 * trailing decimal point, then gcvt() is used. If all else fails,
1182 * a macro using sprintf("%g") is used. Arguments for the Gconvert
1183 * macro are: value, number of digits, whether trailing zeros should
1184 * be retained, and the output buffer.
1185 * Possible values are:
1186 * d_Gconvert='gconvert((x),(n),(t),(b))'
1187 * d_Gconvert='gcvt((x),(n),(b))'
1188 * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
1189 * The last two assume trailing zeros should not be kept.
1190 */
ad2e33dc 1191#define Gconvert(x,n,t,b) gcvt((x),(n),(b))
08aa1457 1192
924b3ec4 1193/* HAS_GNULIBC:
08aa1457 1194 * This symbol, if defined, indicates to the C program that
924b3ec4 1195 * the GNU C library is being used.
08aa1457 1196 */
924b3ec4
GS
1197/*#define HAS_GNULIBC /**/
1198/* HAS_ISASCII:
1199 * This manifest constant lets the C program know that isascii
1200 * is available.
08aa1457 1201 */
924b3ec4 1202#define HAS_ISASCII /**/
08aa1457 1203
be44fb0e
GS
1204/* HAS_LCHOWN:
1205 * This symbol, if defined, indicates that the lchown routine is
1206 * available to operate on a symbolic link (instead of following the
1207 * link).
1208 */
1209/*#define HAS_LCHOWN /**/
1210
924b3ec4
GS
1211/* HAS_OPEN3:
1212 * This manifest constant lets the C program know that the three
1213 * argument form of open(2) is available.
08aa1457 1214 */
924b3ec4 1215/*#define HAS_OPEN3 /**/
08aa1457 1216
924b3ec4
GS
1217/* HAS_SAFE_BCOPY:
1218 * This symbol, if defined, indicates that the bcopy routine is available
1219 * to copy potentially overlapping memory blocks. Otherwise you should
1220 * probably use memmove() or memcpy(). If neither is defined, roll your
1221 * own version.
08aa1457 1222 */
924b3ec4 1223/*#define HAS_SAFE_BCOPY /**/
08aa1457 1224
924b3ec4
GS
1225/* HAS_SAFE_MEMCPY:
1226 * This symbol, if defined, indicates that the memcpy routine is available
1227 * to copy potentially overlapping memory blocks. Otherwise you should
1228 * probably use memmove() or memcpy(). If neither is defined, roll your
1229 * own version.
08aa1457 1230 */
924b3ec4 1231/*#define HAS_SAFE_MEMCPY /**/
08aa1457 1232
924b3ec4
GS
1233/* HAS_SANE_MEMCMP:
1234 * This symbol, if defined, indicates that the memcmp routine is available
1235 * and can be used to compare relative magnitudes of chars with their high
1236 * bits set. If it is not defined, roll your own version.
08aa1457 1237 */
924b3ec4 1238#define HAS_SANE_MEMCMP /**/
08aa1457 1239
924b3ec4
GS
1240/* HAS_SIGACTION:
1241 * This symbol, if defined, indicates that Vr4's sigaction() routine
1242 * is available.
fea7140c 1243 */
924b3ec4 1244/*#define HAS_SIGACTION /**/
fea7140c 1245
08aa1457
PP
1246/* Sigjmp_buf:
1247 * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
1248 */
1249/* Sigsetjmp:
1250 * This macro is used in the same way as sigsetjmp(), but will invoke
1251 * traditional setjmp() if sigsetjmp isn't available.
1252 * See HAS_SIGSETJMP.
1253 */
1254/* Siglongjmp:
1255 * This macro is used in the same way as siglongjmp(), but will invoke
1256 * traditional longjmp() if siglongjmp isn't available.
1257 * See HAS_SIGSETJMP.
1258 */
1259/*#define HAS_SIGSETJMP /**/
1260#ifdef HAS_SIGSETJMP
1261#define Sigjmp_buf sigjmp_buf
1262#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
1263#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
1264#else
1265#define Sigjmp_buf jmp_buf
1266#define Sigsetjmp(buf,save_mask) setjmp((buf))
1267#define Siglongjmp(buf,retval) longjmp((buf),(retval))
1268#endif
1269
924b3ec4
GS
1270/* USE_STDIO_PTR:
1271 * This symbol is defined if the _ptr and _cnt fields (or similar)
1272 * of the stdio FILE structure can be used to access the stdio buffer
1273 * for a file handle. If this is defined, then the FILE_ptr(fp)
1274 * and FILE_cnt(fp) macros will also be defined and should be used
1275 * to access these fields.
08aa1457 1276 */
924b3ec4
GS
1277/* FILE_ptr:
1278 * This macro is used to access the _ptr field (or equivalent) of the
1279 * FILE structure pointed to by its argument. This macro will always be
1280 * defined if USE_STDIO_PTR is defined.
1281 */
1282/* STDIO_PTR_LVALUE:
1283 * This symbol is defined if the FILE_ptr macro can be used as an
1284 * lvalue.
1285 */
1286/* FILE_cnt:
1287 * This macro is used to access the _cnt field (or equivalent) of the
1288 * FILE structure pointed to by its argument. This macro will always be
1289 * defined if USE_STDIO_PTR is defined.
1290 */
1291/* STDIO_CNT_LVALUE:
1292 * This symbol is defined if the FILE_cnt macro can be used as an
1293 * lvalue.
1294 */
1295#define USE_STDIO_PTR /**/
1296#ifdef USE_STDIO_PTR
1297#define FILE_ptr(fp) ((fp)->curp)
1298#define STDIO_PTR_LVALUE /**/
1299#define FILE_cnt(fp) ((fp)->level)
1300#define STDIO_CNT_LVALUE /**/
1301#endif
08aa1457 1302
924b3ec4
GS
1303/* USE_STDIO_BASE:
1304 * This symbol is defined if the _base field (or similar) of the
1305 * stdio FILE structure can be used to access the stdio buffer for
1306 * a file handle. If this is defined, then the FILE_base(fp) macro
1307 * will also be defined and should be used to access this field.
1308 * Also, the FILE_bufsiz(fp) macro will be defined and should be used
1309 * to determine the number of bytes in the buffer. USE_STDIO_BASE
1310 * will never be defined unless USE_STDIO_PTR is.
08aa1457 1311 */
924b3ec4
GS
1312/* FILE_base:
1313 * This macro is used to access the _base field (or equivalent) of the
1314 * FILE structure pointed to by its argument. This macro will always be
1315 * defined if USE_STDIO_BASE is defined.
08aa1457 1316 */
924b3ec4
GS
1317/* FILE_bufsiz:
1318 * This macro is used to determine the number of bytes in the I/O
1319 * buffer pointed to by _base field (or equivalent) of the FILE
1320 * structure pointed to its argument. This macro will always be defined
1321 * if USE_STDIO_BASE is defined.
1322 */
1323#define USE_STDIO_BASE /**/
1324#ifdef USE_STDIO_BASE
1325#define FILE_base(fp) ((fp)->buffer)
1326#define FILE_bufsiz(fp) ((fp)->level + (fp)->curp - (fp)->buffer)
1327#endif
08aa1457 1328
924b3ec4
GS
1329/* HAS_VPRINTF:
1330 * This symbol, if defined, indicates that the vprintf routine is available
1331 * to printf with a pointer to an argument list. If unavailable, you
1332 * may need to write your own, probably in terms of _doprnt().
08aa1457 1333 */
924b3ec4
GS
1334/* USE_CHAR_VSPRINTF:
1335 * This symbol is defined if this system has vsprintf() returning type
1336 * (char*). The trend seems to be to declare it as "int vsprintf()". It
1337 * is up to the package author to declare vsprintf correctly based on the
1338 * symbol.
1339 */
1340#define HAS_VPRINTF /**/
1341/*#define USE_CHAR_VSPRINTF /**/
08aa1457 1342
07ba5892
GS
1343/* DOUBLESIZE:
1344 * This symbol contains the size of a double, so that the C preprocessor
1345 * can make decisions based on it.
1346 */
1347#define DOUBLESIZE 8 /**/
1348
924b3ec4 1349/* I_TIME:
08aa1457 1350 * This symbol, if defined, indicates to the C program that it should
924b3ec4 1351 * include <time.h>.
08aa1457 1352 */
924b3ec4 1353/* I_SYS_TIME:
08aa1457 1354 * This symbol, if defined, indicates to the C program that it should
924b3ec4 1355 * include <sys/time.h>.
08aa1457 1356 */
924b3ec4 1357/* I_SYS_TIME_KERNEL:
08aa1457 1358 * This symbol, if defined, indicates to the C program that it should
924b3ec4 1359 * include <sys/time.h> with KERNEL defined.
08aa1457 1360 */
924b3ec4
GS
1361#define I_TIME /**/
1362/*#define I_SYS_TIME /**/
1363/*#define I_SYS_TIME_KERNEL /**/
08aa1457 1364
924b3ec4
GS
1365/* INTSIZE:
1366 * This symbol contains the value of sizeof(int) so that the C
1367 * preprocessor can make decisions based on it.
08aa1457 1368 */
924b3ec4
GS
1369/* LONGSIZE:
1370 * This symbol contains the value of sizeof(long) so that the C
1371 * preprocessor can make decisions based on it.
08aa1457 1372 */
924b3ec4
GS
1373/* SHORTSIZE:
1374 * This symbol contains the value of sizeof(short) so that the C
1375 * preprocessor can make decisions based on it.
1376 */
1377#define INTSIZE 4 /**/
1378#define LONGSIZE 4 /**/
1379#define SHORTSIZE 2 /**/
08aa1457 1380
924b3ec4
GS
1381/* VAL_O_NONBLOCK:
1382 * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
1383 * non-blocking I/O for the file descriptor. Note that there is no way
1384 * back, i.e. you cannot turn it blocking again this way. If you wish to
1385 * alternatively switch between blocking and non-blocking, use the
1386 * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
08aa1457 1387 */
924b3ec4
GS
1388/* VAL_EAGAIN:
1389 * This symbol holds the errno error code set by read() when no data was
1390 * present on the non-blocking file descriptor.
1391 */
1392/* RD_NODATA:
1393 * This symbol holds the return code from read() when no data is present
1394 * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
1395 * not defined, then you can't distinguish between no data and EOF by
1396 * issuing a read(). You'll have to find another way to tell for sure!
1397 */
1398/* EOF_NONBLOCK:
1399 * This symbol, if defined, indicates to the C program that a read() on
1400 * a non-blocking file descriptor will return 0 on EOF, and not the value
1401 * held in RD_NODATA (-1 usually, in that case!).
1402 */
1403#define VAL_O_NONBLOCK O_NONBLOCK
1404#define VAL_EAGAIN EAGAIN
1405#define RD_NODATA -1
1406#define EOF_NONBLOCK
08aa1457 1407
07ba5892
GS
1408/* PTRSIZE:
1409 * This symbol contains the size of a pointer, so that the C preprocessor
1410 * can make decisions based on it. It will be sizeof(void *) if
1411 * the compiler supports (void *); otherwise it will be
1412 * sizeof(char *).
1413 */
1414#define PTRSIZE 4 /**/
1415
924b3ec4
GS
1416/* RANDBITS:
1417 * This symbol contains the number of bits of random number the rand()
1418 * function produces. Usual values are 15, 16, and 31.
1419 */
1420#define RANDBITS 15 /**/
1421
1422/* SSize_t:
1423 * This symbol holds the type used by functions that return
1424 * a count of bytes or an error condition. It must be a signed type.
1425 * It is usually ssize_t, but may be long or int, etc.
1426 * It may be necessary to include <sys/types.h> or <unistd.h>
1427 * to get any typedef'ed information.
1428 * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
1429 */
1430#define SSize_t int /* signed count of bytes */
1431
1432/* OSNAME:
1433 * This symbol contains the name of the operating system, as determined
1434 * by Configure. You shouldn't rely on it too much; the specific
1435 * feature tests from Configure are generally more reliable.
1436 */
1437#define OSNAME "MSWin32" /**/
1438
924b3ec4
GS
1439/* CAT2:
1440 * This macro catenates 2 tokens together.
08aa1457 1441 */
924b3ec4
GS
1442/* STRINGIFY:
1443 * This macro surrounds its token with double quotes.
1444 */
1445#if 42 == 1
1446#define CAT2(a,b)a/**/b
1447#define STRINGIFY(a)"a"
1448 /* If you can get stringification with catify, tell me how! */
1449#endif
1450#if 42 == 42
1451#define CAT2(a,b)a ## b
1452#define StGiFy(a)# a
1453#define STRINGIFY(a)StGiFy(a)
1454#endif
1455#if 42 != 1 && 42 != 42
1456#include "Bletch: How does this C preprocessor catenate tokens?"
1457#endif
1458
1459/* CSH:
0cd52aa3 1460 * This symbol, if defined, contains the full pathname of csh.
08aa1457 1461 */
0cd52aa3
GS
1462/*#define HAS_CSH /**/
1463#ifdef HAS_CSH
1464#define CSH "" /**/
1465#endif
1466
1467/* HAS_ENDHOSTENT:
1468 * This symbol, if defined, indicates that the endhostent() routine is
1469 * available to close whatever was being used for host queries.
1470 */
1471/*#define HAS_ENDHOSTENT /**/
1472
1473/* HAS_ENDNETENT:
1474 * This symbol, if defined, indicates that the endnetent() routine is
1475 * available to close whatever was being used for network queries.
1476 */
1477/*#define HAS_ENDNETENT /**/
1478
1479/* HAS_ENDPROTOENT:
1480 * This symbol, if defined, indicates that the endprotoent() routine is
1481 * available to close whatever was being used for protocol queries.
1482 */
1483/*#define HAS_ENDPROTOENT /**/
1484
1485/* HAS_ENDSERVENT:
1486 * This symbol, if defined, indicates that the endservent() routine is
1487 * available to close whatever was being used for service queries.
1488 */
1489/*#define HAS_ENDSERVENT /**/
924b3ec4 1490
07ba5892
GS
1491/* HAS_GETHOSTBYADDR:
1492 * This symbol, if defined, indicates that the gethostbyaddr() routine is
1493 * available to look up hosts by their IP addresses.
1494 */
1495#define HAS_GETHOSTBYADDR /**/
1496
1497/* HAS_GETHOSTBYNAME:
1498 * This symbol, if defined, indicates that the gethostbyname() routine is
1499 * available to look up host names in some data base or other.
1500 */
1501#define HAS_GETHOSTBYNAME /**/
1502
1503/* HAS_GETHOSTENT:
1504 * This symbol, if defined, indicates that the gethostent() routine is
1505 * available to look up host names in some data base or another.
1506 */
1507/*#define HAS_GETHOSTENT /**/
1508
1509/* HAS_GETNETBYADDR:
1510 * This symbol, if defined, indicates that the getnetbyaddr() routine is
1511 * available to look up networks by their IP addresses.
1512 */
1513/*#define HAS_GETNETBYADDR /**/
1514
1515/* HAS_GETNETBYNAME:
1516 * This symbol, if defined, indicates that the getnetbyname() routine is
1517 * available to look up networks by their names.
1518 */
1519/*#define HAS_GETNETBYNAME /**/
1520
0cd52aa3
GS
1521/* HAS_GETNETENT:
1522 * This symbol, if defined, indicates that the getnetent() routine is
1523 * available to look up network names in some data base or another.
1524 */
1525/*#define HAS_GETNETENT /**/
1526
1527/* HAS_GETPROTOENT:
1528 * This symbol, if defined, indicates that the getprotoent() routine is
1529 * available to look up protocols in some data base or another.
1530 */
1531/*#define HAS_GETPROTOENT /**/
1532
07ba5892
GS
1533/* HAS_GETPROTOBYNAME:
1534 * This symbol, if defined, indicates that the getprotobyname()
1535 * routine is available to look up protocols by their name.
1536 */
1537/* HAS_GETPROTOBYNUMBER:
1538 * This symbol, if defined, indicates that the getprotobynumber()
1539 * routine is available to look up protocols by their number.
1540 */
1541#define HAS_GETPROTOBYNAME /**/
1542#define HAS_GETPROTOBYNUMBER /**/
1543
0cd52aa3
GS
1544/* HAS_GETSERVENT:
1545 * This symbol, if defined, indicates that the getservent() routine is
1546 * available to look up network services in some data base or another.
1547 */
1548/*#define HAS_GETSERVENT /**/
1549
07ba5892
GS
1550/* HAS_GETSERVBYNAME:
1551 * This symbol, if defined, indicates that the getservbyname()
1552 * routine is available to look up services by their name.
1553 */
1554/* HAS_GETSERVBYPORT:
1555 * This symbol, if defined, indicates that the getservbyport()
1556 * routine is available to look up services by their port.
1557 */
1558#define HAS_GETSERVBYNAME /**/
1559#define HAS_GETSERVBYPORT /**/
1560
0cd52aa3
GS
1561/* HAS_LONG_DOUBLE:
1562 * This symbol will be defined if the C compiler supports long
1563 * doubles.
1564 */
1565/* LONG_DOUBLESIZE:
1566 * This symbol contains the size of a long double, so that the
1567 * C preprocessor can make decisions based on it. It is only
1568 * defined if the system supports long doubles.
1569 */
1570#define HAS_LONG_DOUBLE /**/
1571#ifdef HAS_LONG_DOUBLE
1572#define LONG_DOUBLESIZE 10 /**/
1573#endif
1574
bdaec6b3
GS
1575/* HAS_LONG_LONG:
1576 * This symbol will be defined if the C compiler supports
1577 * long long.
1578 */
1579/* LONGLONGSIZE:
1580 * This symbol contains the size of a long long, so that the
1581 * C preprocessor can make decisions based on it. It is only
1582 * defined if the system supports long long.
1583 */
1584/*#define HAS_LONG_LONG /**/
1585#ifdef HAS_LONG_LONG
1586#define LONGLONGSIZE 8 /**/
1587#endif
1588
924b3ec4
GS
1589/* HAS_SETGROUPS:
1590 * This symbol, if defined, indicates that the setgroups() routine is
1591 * available to set the list of process groups. If unavailable, multiple
1592 * groups are probably not supported.
1593 */
1594/*#define HAS_SETGROUPS /**/
1595
07ba5892
GS
1596/* HAS_SETHOSTENT:
1597 * This symbol, if defined, indicates that the sethostent() routine is
1598 * available.
1599 */
1600/*#define HAS_SETHOSTENT /**/
1601
0cd52aa3
GS
1602/* HAS_SETNETENT:
1603 * This symbol, if defined, indicates that the setnetent() routine is
1604 * available.
1605 */
1606/*#define HAS_SETNETENT /**/
1607
1608/* HAS_SETPROTOENT:
1609 * This symbol, if defined, indicates that the setprotoent() routine is
1610 * available.
1611 */
1612/*#define HAS_SETPROTOENT /**/
1613
1614/* HAS_SETSERVENT:
1615 * This symbol, if defined, indicates that the setservent() routine is
1616 * available.
1617 */
1618/*#define HAS_SETSERVENT /**/
1619
1620/* HAS_SETVBUF:
1621 * This symbol, if defined, indicates that the setvbuf routine is
1622 * available to change buffering on an open stdio stream.
1623 * to a line-buffered mode.
1624 */
1625#define HAS_SETVBUF /**/
1626
bdaec6b3
GS
1627/* HAS_SOCKET:
1628 * This symbol, if defined, indicates that the BSD socket interface is
1629 * supported.
1630 */
1631/* HAS_SOCKETPAIR:
1632 * This symbol, if defined, indicates that the BSD socketpair() call is
1633 * supported.
1634 */
1635#define HAS_SOCKET /**/
1636/*#define HAS_SOCKETPAIR /**/
1637
be44fb0e
GS
1638/* HAS_UNION_SEMUN:
1639 * This symbol, if defined, indicates that the union semun is
1640 * defined by including <sys/sem.h>. If not, the user code
1641 * probably needs to define it as:
1642 * union semun {
1643 * int val;
1644 * struct semid_ds *buf;
1645 * unsigned short *array;
1646 * }
1647 */
1648/* USE_SEMCTL_SEMUN:
1649 * This symbol, if defined, indicates that union semun is
1650 * used for semctl IPC_STAT.
1651 */
1652/* USE_SEMCTL_SEMID_DS:
1653 * This symbol, if defined, indicates that struct semid_ds * is
1654 * used for semctl IPC_STAT.
1655 */
1656#define HAS_UNION_SEMUN /**/
1657/*#define USE_SEMCTL_SEMUN /**/
1658/*#define USE_SEMCTL_SEMID_DS /**/
1659
924b3ec4
GS
1660/* Signal_t:
1661 * This symbol's value is either "void" or "int", corresponding to the
1662 * appropriate return type of a signal handler. Thus, you can declare
1663 * a signal handler using "Signal_t (*handler)()", and define the
1664 * handler using "Signal_t handler(sig)".
1665 */
1666#define Signal_t void /* Signal handler's return type */
1667
1668/* Groups_t:
1669 * This symbol holds the type used for the second argument to
1670 * getgroups() and setgropus(). Usually, this is the same as
1671 * gidtype (gid_t) , but sometimes it isn't.
1672 * It can be int, ushort, uid_t, etc...
1673 * It may be necessary to include <sys/types.h> to get any
1674 * typedef'ed information. This is only required if you have
1675 * getgroups() or setgropus()..
1676 */
1677#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
1678#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
1679#endif
1680
1681/* I_NETDB:
1682 * This symbol, if defined, indicates that <netdb.h> exists and
1683 * should be included.
1684 */
1685/*#define I_NETDB /**/
08aa1457 1686
be44fb0e 1687/* I_PWD:
bdaec6b3 1688 * This symbol, if defined, indicates to the C program that it should
be44fb0e 1689 * include <pwd.h>.
bdaec6b3 1690 */
be44fb0e
GS
1691/* PWQUOTA:
1692 * This symbol, if defined, indicates to the C program that struct passwd
1693 * contains pw_quota.
1694 */
1695/* PWAGE:
1696 * This symbol, if defined, indicates to the C program that struct passwd
1697 * contains pw_age.
1698 */
1699/* PWCHANGE:
1700 * This symbol, if defined, indicates to the C program that struct passwd
1701 * contains pw_change.
1702 */
1703/* PWCLASS:
1704 * This symbol, if defined, indicates to the C program that struct passwd
1705 * contains pw_class.
1706 */
1707/* PWEXPIRE:
1708 * This symbol, if defined, indicates to the C program that struct passwd
1709 * contains pw_expire.
1710 */
1711/* PWCOMMENT:
1712 * This symbol, if defined, indicates to the C program that struct passwd
1713 * contains pw_comment.
1714 */
1715/* PWGECOS:
1716 * This symbol, if defined, indicates to the C program that struct passwd
1717 * contains pw_gecos.
1718 */
28e8609d
JH
1719/* PWPASSWD:
1720 * This symbol, if defined, indicates to the C program that struct passwd
1721 * contains pw_passwd.
1722 */
1723/* HAS_SETPWENT:
1724 * This symbol, if defined, indicates that the getpwrent routine is
1725 * available for initializing sequential access of the passwd database.
1726 */
1727/* HAS_GETPWENT:
1728 * This symbol, if defined, indicates that the getpwent routine is
1729 * available for sequential access of the password database.
1730 */
1731/* HAS_ENDPWENT:
1732 * This symbol, if defined, indicates that the getpwent routine is
1733 * available for finalizing sequential access of the passwd database.
1734 */
be44fb0e
GS
1735/*#define I_PWD /**/
1736/*#define PWQUOTA /**/
1737/*#define PWAGE /**/
1738/*#define PWCHANGE /**/
1739/*#define PWCLASS /**/
1740/*#define PWEXPIRE /**/
1741/*#define PWCOMMENT /**/
1742/*#define PWGECOS /**/
28e8609d
JH
1743/*#define PWPASSWD /**/
1744/*#define HAS_SETPWENT /**/
1745/*#define HAS_GETPWENT /**/
1746/*#define HAS_ENDPWENT /**/
bdaec6b3 1747
9036c72f
GS
1748/* Free_t:
1749 * This variable contains the return type of free(). It is usually
1750 * void, but occasionally int.
08aa1457 1751 */
9036c72f
GS
1752/* Malloc_t:
1753 * This symbol is the type of pointer returned by malloc and realloc.
1754 */
1755#define Malloc_t void * /**/
1756#define Free_t void /**/
1757
1758/* MYMALLOC:
1759 * This symbol, if defined, indicates that we're using our own malloc.
08aa1457 1760 */
9036c72f 1761/*#define MYMALLOC /**/
08aa1457 1762
be44fb0e
GS
1763/* SIG_NAME:
1764 * This symbol contains a list of signal names in order of
1765 * signal number. This is intended
1766 * to be used as a static array initialization, like this:
1767 * char *sig_name[] = { SIG_NAME };
1768 * The signals in the list are separated with commas, and each signal
1769 * is surrounded by double quotes. There is no leading SIG in the signal
1770 * name, i.e. SIGQUIT is known as "QUIT".
1771 * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
1772 * etc., where nn is the actual signal number (e.g. NUM37).
1773 * The signal number for sig_name[i] is stored in sig_num[i].
1774 * The last element is 0 to terminate the list with a NULL. This
1775 * corresponds to the 0 at the end of the sig_num list.
1776 */
1777/* SIG_NUM:
1778 * This symbol contains a list of signal numbers, in the same order as the
1779 * SIG_NAME list. It is suitable for static array initialization, as in:
1780 * int sig_num[] = { SIG_NUM };
1781 * The signals in the list are separated with commas, and the indices
1782 * within that list and the SIG_NAME list match, so it's easy to compute
1783 * the signal name from a number or vice versa at the price of a small
1784 * dynamic linear lookup.
1785 * Duplicates are allowed, but are moved to the end of the list.
1786 * The signal number corresponding to sig_name[i] is sig_number[i].
1787 * if (i < NSIG) then sig_number[i] == i.
1788 * The last element is 0, corresponding to the 0 at the end of
1789 * the sig_name list.
1790 */
1791#define SIG_NAME "ZERO", "INT", "QUIT", "ILL", "FPE", "KILL", "SEGV", "PIPE", "ALRM", "TERM", "USR1", "USR2", "CHLD", "USR3", "BREAK", "ABRT", "STOP", "CONT", "CLD", 0 /**/
1792#define SIG_NUM 0, 2, 3, 4, 8, 9, 11, 13, 14, 15, 16, 17, 18, 20, 21, 22, 23, 25, 18, 0 /**/
1793
9036c72f
GS
1794/* VOIDFLAGS:
1795 * This symbol indicates how much support of the void type is given by this
1796 * compiler. What various bits mean:
1797 *
1798 * 1 = supports declaration of void
1799 * 2 = supports arrays of pointers to functions returning void
1800 * 4 = supports comparisons between pointers to void functions and
1801 * addresses of void functions
1802 * 8 = suports declaration of generic void pointers
1803 *
1804 * The package designer should define VOIDUSED to indicate the requirements
1805 * of the package. This can be done either by #defining VOIDUSED before
1806 * including config.h, or by defining defvoidused in Myinit.U. If the
1807 * latter approach is taken, only those flags will be tested. If the
1808 * level of void support necessary is not present, defines void to int.
08aa1457 1809 */
9036c72f
GS
1810#ifndef VOIDUSED
1811#define VOIDUSED 15
1812#endif
1813#define VOIDFLAGS 15
1814#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
1815#define void int /* is void to be avoided? */
1816#define M_VOID /* Xenix strikes again */
1817#endif
08aa1457 1818
9036c72f
GS
1819/* ARCHLIB:
1820 * This variable, if defined, holds the name of the directory in
1821 * which the user wants to put architecture-dependent public
1822 * library files for perl5. It is most often a local directory
1823 * such as /usr/local/lib. Programs using this variable must be
1824 * prepared to deal with filename expansion. If ARCHLIB is the
1825 * same as PRIVLIB, it is not defined, since presumably the
1826 * program already searches PRIVLIB.
08aa1457 1827 */
9036c72f
GS
1828/* ARCHLIB_EXP:
1829 * This symbol contains the ~name expanded version of ARCHLIB, to be used
08aa1457
PP
1830 * in programs that are not prepared to deal with ~ expansion at run-time.
1831 */
05fc92f1 1832#define ARCHLIB "c:\\perl\\5.00473\\lib\\MSWin32-x86" /**/
9036c72f 1833/*#define ARCHLIB_EXP "" /**/
08aa1457 1834
924b3ec4
GS
1835/* DLSYM_NEEDS_UNDERSCORE:
1836 * This symbol, if defined, indicates that we need to prepend an
1837 * underscore to the symbol name before calling dlsym(). This only
1838 * makes sense if you *have* dlsym, which we will presume is the
1839 * case if you're using dl_dlopen.xs.
1840 */
1841/*#define DLSYM_NEEDS_UNDERSCORE /**/
1842
1843/* USE_SFIO:
1844 * This symbol, if defined, indicates that sfio should
1845 * be used.
1846 */
1847/*#define USE_SFIO /**/
1848
1849/* USE_DYNAMIC_LOADING:
1850 * This symbol, if defined, indicates that dynamic loading of
1851 * some sort is available.
1852 */
1853#define USE_DYNAMIC_LOADING /**/
1854
1855/* DB_Prefix_t:
1856 * This symbol contains the type of the prefix structure element
1857 * in the <db.h> header file. In older versions of DB, it was
1858 * int, while in newer ones it is u_int32_t.
1859 */
1860/* DB_Hash_t:
1861 * This symbol contains the type of the prefix structure element
1862 * in the <db.h> header file. In older versions of DB, it was
1863 * int, while in newer ones it is size_t.
1864 */
1865#define DB_Hash_t int /**/
1866#define DB_Prefix_t int /**/
1867
9036c72f
GS
1868/* PRIVLIB:
1869 * This symbol contains the name of the private library for this package.
1870 * The library is private in the sense that it needn't be in anyone's
1871 * execution path, but it should be accessible by the world. The program
1872 * should be prepared to do ~ expansion.
1873 */
1874/* PRIVLIB_EXP:
1875 * This symbol contains the ~name expanded version of PRIVLIB, to be used
1876 * in programs that are not prepared to deal with ~ expansion at run-time.
1877 */
05fc92f1
GS
1878#define PRIVLIB "c:\\perl\\5.00473\\lib" /**/
1879#define PRIVLIB_EXP (win32_get_privlib("5.00473")) /**/
9036c72f
GS
1880
1881/* SITEARCH:
1882 * This symbol contains the name of the private library for this package.
1883 * The library is private in the sense that it needn't be in anyone's
1884 * execution path, but it should be accessible by the world. The program
1885 * should be prepared to do ~ expansion.
1886 * The standard distribution will put nothing in this directory.
1887 * Individual sites may place their own extensions and modules in
1888 * this directory.
1889 */
1890/* SITEARCH_EXP:
1891 * This symbol contains the ~name expanded version of SITEARCH, to be used
1892 * in programs that are not prepared to deal with ~ expansion at run-time.
1893 */
05fc92f1 1894#define SITEARCH "c:\\perl\\site\\5.00473\\lib\\MSWin32-x86" /**/
9036c72f
GS
1895/*#define SITEARCH_EXP "" /**/
1896
1897/* SITELIB:
1898 * This symbol contains the name of the private library for this package.
1899 * The library is private in the sense that it needn't be in anyone's
1900 * execution path, but it should be accessible by the world. The program
1901 * should be prepared to do ~ expansion.
1902 * The standard distribution will put nothing in this directory.
1903 * Individual sites may place their own extensions and modules in
1904 * this directory.
1905 */
1906/* SITELIB_EXP:
1907 * This symbol contains the ~name expanded version of SITELIB, to be used
1908 * in programs that are not prepared to deal with ~ expansion at run-time.
1909 */
05fc92f1
GS
1910#define SITELIB "c:\\perl\\site\\5.00473\\lib" /**/
1911#define SITELIB_EXP (win32_get_sitelib("5.00473")) /**/
9036c72f 1912
08aa1457
PP
1913/* STARTPERL:
1914 * This variable contains the string to put in front of a perl
1915 * script to make sure (one hopes) that it runs with perl and not
1916 * some shell.
1917 */
161b471a 1918#define STARTPERL "#!perl" /**/
08aa1457
PP
1919
1920/* USE_PERLIO:
1921 * This symbol, if defined, indicates that the PerlIO abstraction should
1922 * be used throughout. If not defined, stdio should be
1923 * used in a fully backward compatible manner.
1924 */
1925/*#define USE_PERLIO /**/
1926
bdaec6b3
GS
1927/* HAS_GETHOST_PROTOS:
1928 * This symbol, if defined, indicates that <netdb.h> includes
1929 * prototypes for gethostent(), gethostbyname(), and
1930 * gethostbyaddr(). Otherwise, it is up to the program to guess
1931 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1932 */
1933#define HAS_GETHOST_PROTOS /**/
1934
1935/* HAS_GETNET_PROTOS:
1936 * This symbol, if defined, indicates that <netdb.h> includes
1937 * prototypes for getnetent(), getnetbyname(), and
1938 * getnetbyaddr(). Otherwise, it is up to the program to guess
1939 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1940 */
1941/*#define HAS_GETNET_PROTOS /**/
1942
1943/* HAS_GETPROTO_PROTOS:
1944 * This symbol, if defined, indicates that <netdb.h> includes
1945 * prototypes for getprotoent(), getprotobyname(), and
1946 * getprotobyaddr(). Otherwise, it is up to the program to guess
1947 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1948 */
1949#define HAS_GETPROTO_PROTOS /**/
1950
1951/* HAS_GETSERV_PROTOS:
1952 * This symbol, if defined, indicates that <netdb.h> includes
1953 * prototypes for getservent(), getservbyname(), and
1954 * getservbyaddr(). Otherwise, it is up to the program to guess
1955 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1956 */
1957#define HAS_GETSERV_PROTOS /**/
1958
924b3ec4
GS
1959/* Netdb_host_t:
1960 * This symbol holds the type used for the 1st argument
1961 * to gethostbyaddr().
08aa1457 1962 */
924b3ec4
GS
1963/* Netdb_hlen_t:
1964 * This symbol holds the type used for the 2nd argument
1965 * to gethostbyaddr().
1966 */
1967/* Netdb_name_t:
1968 * This symbol holds the type used for the argument to
1969 * gethostbyname().
1970 */
1971/* Netdb_net_t:
1972 * This symbol holds the type used for the 1st argument to
1973 * getnetbyaddr().
1974 */
1975#define Netdb_host_t char * /**/
1976#define Netdb_hlen_t int /**/
1977#define Netdb_name_t char * /**/
1978#define Netdb_net_t long /**/
1979
1980/* Select_fd_set_t:
1981 * This symbol holds the type used for the 2nd, 3rd, and 4th
1982 * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
1983 * is defined, and 'int *' otherwise. This is only useful if you
1984 * have select(), of course.
1985 */
1986#define Select_fd_set_t Perl_fd_set * /**/
1987
1988/* ARCHNAME:
1989 * This symbol holds a string representing the architecture name.
1990 * It may be used to construct an architecture-dependant pathname
1991 * where library files may be held under a private library, for
1992 * instance.
1993 */
1994#define ARCHNAME "MSWin32-x86" /**/
1995
1996/* HAS_PTHREAD_YIELD:
1997 * This symbol, if defined, indicates that the pthread_yield
1998 * routine is available to yield the execution of the current
1999 * thread.
2000 */
be44fb0e
GS
2001/* HAS_SCHED_YIELD:
2002 * This symbol, if defined, indicates that the sched_yield
2003 * routine is available to yield the execution of the current
2004 * thread.
2005 */
924b3ec4 2006/*#define HAS_PTHREAD_YIELD /**/
be44fb0e 2007/*#define HAS_SCHED_YIELD /**/
924b3ec4
GS
2008
2009/* PTHREADS_CREATED_JOINABLE:
2010 * This symbol, if defined, indicates that pthreads are created
2011 * in the joinable (aka undetached) state.
2012 */
2013/*#define PTHREADS_CREATED_JOINABLE /**/
2014
2015/* USE_THREADS:
2016 * This symbol, if defined, indicates that Perl should
2017 * be built to use threads.
2018 */
07ba5892
GS
2019/* OLD_PTHREADS_API:
2020 * This symbol, if defined, indicates that Perl should
2021 * be built to use the old draft POSIX threads API.
2022 */
924b3ec4 2023/*#define USE_THREADS /**/
07ba5892 2024/*#define OLD_PTHREADS_API /**/
08aa1457 2025
bdaec6b3
GS
2026/* Time_t:
2027 * This symbol holds the type returned by time(). It can be long,
2028 * or time_t on BSD sites (in which case <sys/types.h> should be
2029 * included).
2030 */
2031#define Time_t time_t /* Time type */
2032
2033/* HAS_TIMES:
2034 * This symbol, if defined, indicates that the times() routine exists.
2035 * Note that this became obsolete on some systems (SUNOS), which now
2036 * use getrusage(). It may be necessary to include <sys/times.h>.
2037 */
2038#define HAS_TIMES /**/
2039
2040/* Fpos_t:
2041 * This symbol holds the type used to declare file positions in libc.
2042 * It can be fpos_t, long, uint, etc... It may be necessary to include
2043 * <sys/types.h> to get any typedef'ed information.
2044 */
2045#define Fpos_t fpos_t /* File position type */
2046
2047/* Gid_t:
2048 * This symbol holds the return type of getgid() and the type of
2049 * argument to setrgid() and related functions. Typically,
2050 * it is the type of group ids in the kernel. It can be int, ushort,
2051 * uid_t, etc... It may be necessary to include <sys/types.h> to get
2052 * any typedef'ed information.
2053 */
2054#define Gid_t gid_t /* Type for getgid(), etc... */
2055
2056/* Off_t:
2057 * This symbol holds the type used to declare offsets in the kernel.
2058 * It can be int, long, off_t, etc... It may be necessary to include
2059 * <sys/types.h> to get any typedef'ed information.
2060 */
2061#define Off_t off_t /* <offset> type */
2062
2063/* Mode_t:
2064 * This symbol holds the type used to declare file modes
2065 * for systems calls. It is usually mode_t, but may be
2066 * int or unsigned short. It may be necessary to include <sys/types.h>
2067 * to get any typedef'ed information.
2068 */
2069#define Mode_t mode_t /* file mode parameter for system calls */
2070
2071/* Pid_t:
2072 * This symbol holds the type used to declare process ids in the kernel.
2073 * It can be int, uint, pid_t, etc... It may be necessary to include
2074 * <sys/types.h> to get any typedef'ed information.
2075 */
2076#define Pid_t int /* PID type */
2077
2078/* Size_t:
2079 * This symbol holds the type used to declare length parameters
2080 * for string functions. It is usually size_t, but may be
2081 * unsigned long, int, etc. It may be necessary to include
2082 * <sys/types.h> to get any typedef'ed information.
2083 */
2084#define Size_t size_t /* length paramater for string functions */
2085
2086/* Uid_t:
2087 * This symbol holds the type used to declare user ids in the kernel.
2088 * It can be int, ushort, uid_t, etc... It may be necessary to include
2089 * <sys/types.h> to get any typedef'ed information.
2090 */
2091#define Uid_t uid_t /* UID type */
2092
08aa1457
PP
2093#endif
2094#include <win32.h>