Commit | Line | Data |
---|---|---|
b4bc034f GS |
1 | If you read this file _as_is_, just ignore the equal signs on the left. |
2 | This file is written in the POD format (see [.POD]PERLPOD.POD;1) which is | |
3 | specially designed to be readable as is. | |
fb73857a | 4 | |
b4bc034f GS |
5 | =head1 NAME |
6 | ||
7 | README.vms - Configuring, building, testing, and installing perl on VMS | |
8 | ||
9 | =head1 SYNOPSIS | |
10 | ||
11 | To configure, build, test, and install perl on VMS: | |
12 | ||
13 | @ Configure | |
14 | mms | |
15 | mms test | |
16 | mms install | |
17 | ||
18 | mmk may be used in place of mms in the last three steps. | |
19 | ||
20 | =head1 DESCRIPTION | |
21 | ||
22 | =head2 Important safety tip | |
97abc6ad | 23 | |
3a385817 | 24 | The build and install procedures have changed significantly from the 5.004 |
b4bc034f GS |
25 | releases! Make sure you read the "Configuring the Perl Build", "Building |
26 | Perl", and "Installing Perl" sections of this document before you build or | |
27 | install. | |
97abc6ad | 28 | |
b4bc034f GS |
29 | Also note that, as of Perl version 5.005 and later, an ANSI C compliant |
30 | compiler is required to build Perl. VAX C is *not* ANSI compliant, as it | |
31 | died a natural death some time before the standard was set. Therefore | |
1bc81404 | 32 | VAX C will not compile Perl 5.005 or later. We are sorry about that. |
3bf5f72b | 33 | |
b4bc034f | 34 | If you are stuck without DEC C (the VAX C license should be good for DEC C, |
3bf5f72b GS |
35 | but the media charges might prohibit an upgrade), consider getting Gnu C |
36 | instead. | |
37 | ||
b4bc034f | 38 | |
a83b6f46 | 39 | =head2 Introduction to Perl on VMS |
fb73857a | 40 | |
41 | The VMS port of Perl is as functionally complete as any other Perl port | |
42 | (and as complete as the ports on some Unix systems). The Perl binaries | |
43 | provide all the Perl system calls that are either available under VMS or | |
b4bc034f GS |
44 | reasonably emulated. There are some incompatibilities in process handling |
45 | (e.g. the fork/exec model for creating subprocesses doesn't do what you | |
fb73857a | 46 | might expect under Unix), mainly because VMS and Unix handle processes and |
47 | sub-processes very differently. | |
48 | ||
b4bc034f | 49 | There are still some unimplemented system functions, and of course we |
fb73857a | 50 | could use modules implementing useful VMS system services, so if you'd like |
b4bc034f | 51 | to lend a hand we'd love to have you. Join the Perl Porting Team Now! |
fb73857a | 52 | |
53 | The current sources and build procedures have been tested on a VAX using | |
b4bc034f | 54 | DEC C, and on an AXP using DEC C. If you run into problems with |
1bc81404 CB |
55 | other compilers, please let us know. (Note: DEC C was renamed to Compaq C |
56 | around version 6.2). | |
fb73857a | 57 | |
b4bc034f GS |
58 | There are issues with various versions of DEC C, so if you're not running a |
59 | relatively modern version, check the "DEC C issues" section later on in this | |
fb73857a | 60 | document. |
61 | ||
a83b6f46 | 62 | =head2 Other required software for Compiling Perl on VMS |
b4bc034f GS |
63 | |
64 | In addition to VMS and DCL you will need two things: | |
fb73857a | 65 | |
b4bc034f GS |
66 | =over 4 |
67 | ||
68 | =item 1 A C compiler. | |
69 | ||
1bc81404 | 70 | DEC (now Compaq) C or gcc for VMS (AXP or VAX). |
b4bc034f GS |
71 | |
72 | =item 2 A make tool. | |
73 | ||
74 | DEC's MMS (v2.6 or later), or MadGoat's free MMS | |
75 | analog MMK (available from ftp.madgoat.com/madgoat) both work | |
76 | just fine. Gnu Make might work, but it's been so long since | |
77 | anyone's tested it that we're not sure. MMK is free though, so | |
78 | go ahead and use that. | |
79 | ||
80 | =back | |
81 | ||
a83b6f46 | 82 | =head2 Additional software that is optional for Perl on VMS |
fb73857a | 83 | |
9f3f8d50 | 84 | You may also want to have on hand: |
b4bc034f GS |
85 | |
86 | =over 4 | |
87 | ||
88 | =item 1 GUNZIP/GZIP.EXE for VMS | |
89 | ||
90 | A de-compressor for *.gz and *.tgz files available from a number | |
58979ab1 PP |
91 | of web/ftp sites and is distributed on the OpenVMS Freeware CD-ROM |
92 | from Compaq. | |
b4bc034f | 93 | |
9f3f8d50 | 94 | http://www.fsf.org/order/ftp.html |
adc5a9a5 | 95 | http://www.openvms.compaq.com/freeware/ |
1bc81404 | 96 | http://www.crinoid.com/utils/ |
b4bc034f GS |
97 | |
98 | =item 2 VMS TAR | |
99 | ||
100 | For reading and writing unix tape archives (*.tar files). Vmstar is also | |
58979ab1 PP |
101 | available from a number of web/ftp sites and is distributed on the OpenVMS |
102 | Freeware CD-ROM from Compaq. | |
b4bc034f | 103 | |
9f3f8d50 | 104 | ftp://ftp.lp.se/vms/ |
adc5a9a5 | 105 | http://www.openvms.compaq.com/freeware/ |
b4bc034f GS |
106 | |
107 | =item 3 UNZIP.EXE for VMS | |
108 | ||
109 | A combination decompressor and archive reader/writer for *.zip files. | |
110 | Unzip is available from a number of web/ftp sites. | |
111 | ||
adc5a9a5 CB |
112 | http://www.info-zip.org/UnZip.html |
113 | http://www.openvms.compaq.com/freeware/ | |
58979ab1 | 114 | ftp://ftp.openvms.compaq.com/ |
b4bc034f | 115 | ftp://ftp.madgoat.com/madgoat/ |
adc5a9a5 | 116 | ftp://ftp.process.com/vms-freeware/ |
b4bc034f GS |
117 | |
118 | =item 4 MOST | |
119 | ||
120 | Most is an optional pager that is convenient to use with perldoc (unlike | |
121 | TYPE/PAGE, MOST can go forward and backwards in a document and supports | |
122 | regular expression searching). Most builds with the slang | |
123 | library on VMS. Most and slang are available from: | |
124 | ||
125 | ftp://space.mit.edu/pub/davis/ | |
adc5a9a5 | 126 | ftp://ftp.process.com/vms-freeware/narnia/ |
b4bc034f | 127 | |
1bc81404 CB |
128 | =item 5 GNU PATCH and DIFFUTILS for VMS |
129 | ||
130 | Patches to Perl are usually distributed as GNU unified or contextual diffs. | |
131 | Such patches are created by the GNU diff program (part of the diffutils | |
132 | distribution) and applied with GNU patch. VMS ports of these utilities are | |
133 | available here: | |
134 | ||
135 | http://www.crinoid.com/utils/ | |
adc5a9a5 | 136 | http://www.openvms.compaq.com/freeware/ |
1bc81404 | 137 | |
b4bc034f GS |
138 | =back |
139 | ||
9f3f8d50 | 140 | Please note that UNZIP and GUNZIP are not the same thing (they work with |
b4bc034f | 141 | different formats). Many of the useful files from CPAN (the Comprehensive |
58979ab1 PP |
142 | Perl Archive Network) are in *.tar.gz or *.tgz format (this includes copies |
143 | of the source code for perl as well as modules and scripts that you may | |
144 | wish to add later) hence you probably want to have GUNZIP.EXE and | |
145 | VMSTAR.EXE on your VMS machine. | |
fb73857a | 146 | |
b4bc034f GS |
147 | If you want to include socket support, you'll need a TCP/IP stack and either |
148 | DEC C, or socket libraries. See the "Socket Support (optional)" topic | |
149 | for more details. | |
fb73857a | 150 | |
b4bc034f | 151 | =head1 Configuring the Perl build |
fb73857a | 152 | |
97abc6ad | 153 | To configure perl (a necessary first step), issue the command |
fb73857a | 154 | |
b4bc034f | 155 | @ Configure |
fb73857a | 156 | |
b4bc034f GS |
157 | from the top of an unpacked perl source directory. You will be asked a |
158 | series of questions, and the answers to them (along with the capabilities | |
159 | of your C compiler and network stack) will determine how perl is custom | |
160 | built for your machine. | |
fb73857a | 161 | |
b4bc034f GS |
162 | If you have multiple C compilers installed, you'll have your choice of |
163 | which one to use. Various older versions of DEC C had some caveats, so if | |
164 | you're using a version older than 5.2, check the "DEC C Issues" section. | |
fb73857a | 165 | |
b4bc034f GS |
166 | If you have any symbols or logical names in your environment that may |
167 | interfere with the build or regression testing of perl then configure.com | |
168 | will try to warn you about them. If a logical name is causing | |
7bb57f25 GS |
169 | you trouble but is in an LNM table that you do not have write access to |
170 | then try defining your own to a harmless equivalence string in a table | |
171 | such that it is resolved before the other (e.g. if TMP is defined in the | |
b4bc034f GS |
172 | SYSTEM table then try DEFINE TMP "NL:" or somesuch in your process table) |
173 | otherwise simply deassign the dangerous logical names. The potentially | |
174 | troublesome logicals and symbols are: | |
7bb57f25 GS |
175 | |
176 | TMP "LOGICAL" | |
177 | LIB "LOGICAL" | |
178 | T "LOGICAL" | |
179 | FOO "LOGICAL" | |
180 | EXT "LOGICAL" | |
181 | TEST "SYMBOL" | |
fb73857a | 182 | |
97abc6ad HM |
183 | As a handy shortcut, the command: |
184 | ||
b4bc034f GS |
185 | @ Configure "-des" |
186 | ||
187 | (note the quotation marks and case) will choose reasonable defaults | |
188 | automatically (it takes DEC C over Gnu C, DEC C sockets over SOCKETSHR | |
1bc81404 CB |
189 | sockets, and either over no sockets). Some options can be given |
190 | explicitly on the command line; the following example specifies a | |
191 | non-default location for where Perl will be installed: | |
192 | ||
193 | @ Configure "-d" "-Dprefix=dka100:[utils.perl5.]" | |
194 | ||
dab31494 | 195 | Note that the installation location would be by default where you unpacked |
fe05d1a7 | 196 | the source with a "_ROOT." appended. For example if you unpacked the perl |
dab31494 PP |
197 | source into: |
198 | ||
199 | DKA200:[PERL-5_10_2...] | |
200 | ||
adc5a9a5 | 201 | Then the PERL_SETUP.COM that gets written out by CONFIGURE.COM will |
dab31494 PP |
202 | try to DEFINE your installation PERL_ROOT to be: |
203 | ||
fe05d1a7 | 204 | DKA200:[PERL-5_10_2_ROOT.] |
dab31494 | 205 | |
1bc81404 | 206 | More help with configure.com is available from: |
b4bc034f GS |
207 | |
208 | @ Configure "-h" | |
209 | ||
210 | See the "Changing compile-time options (optional)" section below to learn | |
211 | even more details about how to influence the outcome of the important | |
212 | configuration step. If you find yourself reconfiguring and rebuilding | |
213 | then be sure to also follow the advice in the "Cleaning up and starting | |
214 | fresh (optional)" and the checklist of items in the "CAVEATS" sections | |
215 | below. | |
216 | ||
a83b6f46 | 217 | =head2 Changing compile-time options (optional) for Perl on VMS |
b4bc034f GS |
218 | |
219 | Most of the user definable features of Perl are enabled or disabled in | |
adc5a9a5 CB |
220 | configure.com, which processes the hints file config_h.SH. There is |
221 | code in there to Do The Right Thing, but that may end up being the | |
222 | wrong thing for you. Make sure you understand what you are doing since | |
223 | inappropriate changes to configure.com or config_h.SH can render perl | |
224 | unbuildable; odds are that there's nothing in there you'll need to | |
225 | change. | |
b4bc034f GS |
226 | |
227 | The one exception is the various *DIR install locations. Changing those | |
228 | requires changes in genconfig.pl as well. Be really careful if you need to | |
229 | change these, as they can cause some fairly subtle problems. | |
230 | ||
a83b6f46 | 231 | =head2 Socket Support (optional) for Perl on VMS |
b4bc034f GS |
232 | |
233 | Perl includes a number of functions for IP sockets, which are available if | |
234 | you choose to compile Perl with socket support. Since IP networking is an | |
235 | optional addition to VMS, there are several different IP stacks available. | |
236 | How well integrated they are into the system depends on the stack, your | |
237 | version of VMS, and the version of your C compiler. | |
238 | ||
239 | The most portable solution uses the SOCKETSHR library. In combination with | |
240 | either UCX or NetLib, this supports all the major TCP stacks (Multinet, | |
241 | Pathways, TCPWare, UCX, and CMU) on all versions of VMS Perl runs on, with | |
242 | all the compilers on both VAX and Alpha. The socket interface is also | |
243 | consistent across versions of VMS and C compilers. It has a problem with | |
244 | UDP sockets when used with Multinet, though, so you should be aware of | |
245 | that. | |
246 | ||
247 | The other solution available is to use the socket routines built into DEC | |
248 | C. Which routines are available depend on the version of VMS you're | |
249 | running, and require proper UCX emulation by your TCP/IP vendor. | |
250 | Relatively current versions of Multinet, TCPWare, Pathway, and UCX all | |
251 | provide the required libraries--check your manuals or release notes to see | |
252 | if your version is new enough. | |
253 | ||
254 | =head1 Building Perl | |
255 | ||
256 | The configuration script will print out, at the very end, the MMS or MMK | |
257 | command you need to compile perl. Issue it (exactly as printed) to start | |
258 | the build. | |
97abc6ad | 259 | |
b4bc034f GS |
260 | Once you issue your MMS or MMK command, sit back and wait. Perl should |
261 | compile and link without a problem. If a problem does occur check the | |
262 | "CAVEATS" section of this document. If that does not help send some | |
263 | mail to the VMSPERL mailing list. Instructions are in the "Mailing Lists" | |
264 | section of this document. | |
97abc6ad | 265 | |
b4bc034f | 266 | =head1 Testing Perl |
fb73857a | 267 | |
b4bc034f GS |
268 | Once Perl has built cleanly you need to test it to make sure things work. |
269 | This step is very important since there are always things that can go wrong | |
270 | somehow and yield a dysfunctional Perl for you. | |
fb73857a | 271 | |
272 | Testing is very easy, though, as there's a full test suite in the perl | |
b4bc034f | 273 | distribution. To run the tests, enter the *exact* MMS line you used to |
fb73857a | 274 | compile Perl and add the word "test" to the end, like this: |
275 | ||
b4bc034f | 276 | If the compile command was: |
fb73857a | 277 | |
b4bc034f | 278 | MMS |
fb73857a | 279 | |
b4bc034f | 280 | then the test command ought to be: |
fb73857a | 281 | |
b4bc034f | 282 | MMS test |
fb73857a | 283 | |
b4bc034f GS |
284 | MMS (or MMK) will run all the tests. This may take some time, as there are |
285 | a lot of tests. If any tests fail, there will be a note made on-screen. | |
286 | At the end of all the tests, a summary of the tests, the number passed and | |
287 | failed, and the time taken will be displayed. | |
fb73857a | 288 | |
b4bc034f | 289 | If any tests fail, it means something is wrong with Perl. If the test suite |
fb73857a | 290 | hangs (some tests can take upwards of two or three minutes, or more if |
9f3f8d50 | 291 | you're on an especially slow machine, depending on your machine speed, so |
fb73857a | 292 | don't be hasty), then the test *after* the last one displayed failed. Don't |
293 | install Perl unless you're confident that you're OK. Regardless of how | |
294 | confident you are, make a bug report to the VMSPerl mailing list. | |
295 | ||
b4bc034f GS |
296 | If one or more tests fail, you can get more information on the failure by |
297 | issuing this command sequence: | |
fb73857a | 298 | |
b4bc034f | 299 | @ [.VMS]TEST .typ "" "-v" [.subdir]test.T |
fb73857a | 300 | |
301 | where ".typ" is the file type of the Perl images you just built (if you | |
302 | didn't do anything special, use .EXE), and "[.subdir]test.T" is the test | |
303 | that failed. For example, with a normal Perl build, if the test indicated | |
304 | that [.op]time failed, then you'd do this: | |
305 | ||
b4bc034f | 306 | @ [.VMS]TEST .EXE "" "-v" [.OP]TIME.T |
fb73857a | 307 | |
308 | When you send in a bug report for failed tests, please include the output | |
309 | from this command, which is run from the main source directory: | |
310 | ||
b4bc034f GS |
311 | MCR []MINIPERL "-V" |
312 | ||
313 | Note that -"V" really is a capital V in double quotes. This will dump out a | |
314 | couple of screens worth of configuration information, and can help us | |
315 | diagnose the problem. If (and only if) that did not work then try enclosing | |
316 | the output of: | |
317 | ||
318 | MMS printconfig | |
fb73857a | 319 | |
9f3f8d50 PP |
320 | If (and only if) that did not work then try enclosing the output of: |
321 | ||
b4bc034f | 322 | @ [.vms]myconfig |
fb73857a | 323 | |
b4bc034f GS |
324 | You may also be asked to provide your C compiler version ("CC/VERSION NL:" |
325 | with DEC C, "gcc --version" with GNU CC). To obtain the version of MMS or | |
326 | MMK you are running try "MMS/ident" or "MMK /ident". The GNU make version | |
327 | can be identified with "make --version". | |
328 | ||
a83b6f46 | 329 | =head2 Cleaning up and starting fresh (optional) installing Perl on VMS |
fb73857a | 330 | |
331 | If you need to recompile from scratch, you have to make sure you clean up | |
b4bc034f GS |
332 | first. There is a procedure to do it--enter the *exact* MMS line you used |
333 | to compile and add "realclean" at the end, like this: | |
fb73857a | 334 | |
b4bc034f | 335 | if the compile command was: |
fb73857a | 336 | |
b4bc034f | 337 | MMS |
fb73857a | 338 | |
b4bc034f | 339 | then the cleanup command ought to be: |
fb73857a | 340 | |
b4bc034f | 341 | MMS realclean |
fb73857a | 342 | |
b4bc034f GS |
343 | If you do not do this things may behave erratically during the subsequent |
344 | rebuild attempt. They might not, too, so it is best to be sure and do it. | |
fb73857a | 345 | |
b4bc034f | 346 | =head1 Installing Perl |
fb73857a | 347 | |
348 | There are several steps you need to take to get Perl installed and | |
3a385817 | 349 | running. |
fb73857a | 350 | |
a3ef2c6f | 351 | =over 4 |
b4bc034f | 352 | |
a3ef2c6f | 353 | =item 1 |
fb73857a | 354 | |
a3ef2c6f | 355 | Check your default file protections with |
fb73857a | 356 | |
a3ef2c6f | 357 | SHOW PROTECTION /DEFAULT |
fb73857a | 358 | |
a3ef2c6f | 359 | and adjust if necessary with SET PROTECTION=(code)/DEFAULT. |
fb73857a | 360 | |
a3ef2c6f | 361 | =item 2 |
3a385817 | 362 | |
1bc81404 CB |
363 | Decide where you want Perl to be installed (unless you have already done so |
364 | by using the "prefix" configuration parameter -- see the example in the | |
365 | "Configuring the Perl build" section). | |
b4bc034f | 366 | |
1bc81404 CB |
367 | The DCL script PERL_SETUP.COM that is written by CONFIGURE.COM will help you |
368 | with the definition of the PERL_ROOT and PERLSHR logical names and the PERL | |
369 | foreign command symbol. Take a look at PERL_SETUP.COM and modify it if you | |
370 | want to. The installation process will execute PERL_SETUP.COM and copy | |
371 | files to the directory tree pointed to by the PERL_ROOT logical name defined | |
372 | there, so make sure that you have write access to the parent directory of | |
373 | what will become the root of your Perl installation. | |
fb73857a | 374 | |
a3ef2c6f | 375 | =item 3 |
b4bc034f | 376 | |
a3ef2c6f | 377 | Run the install script via: |
b4bc034f | 378 | |
a3ef2c6f | 379 | MMS install |
b4bc034f | 380 | |
a3ef2c6f | 381 | or |
9f3f8d50 | 382 | |
a3ef2c6f | 383 | MMK install |
b4bc034f | 384 | |
a3ef2c6f GS |
385 | If for some reason it complains about target INSTALL being up to date, |
386 | throw a /FORCE switch on the MMS or MMK command. | |
b4bc034f | 387 | |
a3ef2c6f GS |
388 | =back |
389 | ||
1bc81404 CB |
390 | Copy PERL_SETUP.COM to a place accessible to your perl users. |
391 | ||
a3ef2c6f | 392 | For example: |
fb73857a | 393 | |
a3ef2c6f | 394 | COPY PERL_SETUP.COM SYS$LIBRARY: |
b4bc034f | 395 | |
a3ef2c6f GS |
396 | If you want to have everyone on the system have access to perl |
397 | then add a line that reads | |
fb73857a | 398 | |
a3ef2c6f | 399 | $ @sys$library:perl_setup |
491527d0 | 400 | |
a3ef2c6f | 401 | to SYS$MANAGER:SYLOGIN.COM. |
85988417 | 402 | |
a3ef2c6f GS |
403 | Two alternatives to the foreign symbol would be to install PERL into |
404 | DCLTABLES.EXE (Check out the section "Installing Perl into DCLTABLES | |
405 | (optional)" for more information), or put the image in a | |
406 | directory that's in your DCL$PATH (if you're using VMS V6.2 or higher). | |
85988417 | 407 | |
a3ef2c6f GS |
408 | An alternative to having PERL_SETUP.COM define the PERLSHR logical name |
409 | is to simply copy it into the system shareable library directory with: | |
410 | ||
411 | copy perl_root:[000000]perlshr.exe sys$share: | |
85988417 | 412 | |
a3ef2c6f | 413 | See also the "INSTALLing images (optional)" section. |
491527d0 | 414 | |
a83b6f46 | 415 | =head2 Installing Perl into DCLTABLES (optional) on VMS |
fb73857a | 416 | |
9ef4b0a6 | 417 | Execute the following command file to define PERL as a DCL command. |
b4bc034f | 418 | You'll need CMKRNL privilege to install the new dcltables.exe. |
fb73857a | 419 | |
7bb57f25 GS |
420 | $ create perl.cld |
421 | ! | |
422 | ! modify to reflect location of your perl.exe | |
423 | ! | |
424 | define verb perl | |
425 | image perl_root:[000000]perl.exe | |
426 | cliflags (foreign) | |
427 | $! | |
428 | $ set command perl /table=sys$common:[syslib]dcltables.exe - | |
429 | /output=sys$common:[syslib]dcltables.exe | |
430 | $ install replace sys$common:[syslib]dcltables.exe | |
431 | $ exit | |
fb73857a | 432 | |
a83b6f46 | 433 | =head2 INSTALLing Perl images (optional) on VMS |
9f3f8d50 PP |
434 | |
435 | On systems that are using perl quite a bit, and particularly those with | |
436 | minimal RAM, you can boost the performance of perl by INSTALLing it as | |
adc5a9a5 | 437 | a known image. PERLSHR.EXE is typically larger than 3000 blocks |
9f3f8d50 PP |
438 | and that is a reasonably large amount of IO to load each time perl is |
439 | invoked. | |
440 | ||
441 | INSTALL ADD PERLSHR/SHARE | |
b4bc034f | 442 | INSTALL ADD PERL/HEADER |
9f3f8d50 PP |
443 | |
444 | should be enough for PERLSHR.EXE (/share implies /header and /open), | |
445 | while /HEADER should do for PERL.EXE (perl.exe is not a shared image). | |
446 | ||
b4bc034f GS |
447 | If your code 'use's modules, check to see if there is a shareable image for |
448 | them, too. In the base perl build, POSIX, IO, Fcntl, Opcode, SDBM_File, | |
9f3f8d50 PP |
449 | DCLsym, and Stdio all have shared images that can be installed /SHARE. |
450 | ||
b4bc034f | 451 | How much of a win depends on your memory situation, but if you are firing |
9f3f8d50 | 452 | off perl with any regularity (like more than once every 20 seconds or so) |
b4bc034f | 453 | it is probably beneficial to INSTALL at least portions of perl. |
9f3f8d50 PP |
454 | |
455 | While there is code in perl to remove privileges as it runs you are advised | |
456 | to NOT INSTALL PERL.EXE with PRIVs! | |
fb73857a | 457 | |
dab31494 PP |
458 | =head2 Running h2ph to create perl header files (optional) on VMS |
459 | ||
460 | If using DEC C or Compaq C ensure that you have extracted loose versions | |
461 | of your compiler's header or *.H files. Be sure to check the contents of: | |
462 | ||
463 | SYS$LIBRARY:DECC$RTLDEF.TLB | |
464 | SYS$LIBRARY:SYS$LIB_C.TLB | |
465 | SYS$LIBRARY:SYS$STARLET_C.TLB | |
466 | ||
467 | etcetera. | |
468 | ||
469 | If using GNU cc then also check your GNU_CC:[000000...] tree for the locations | |
470 | of the GNU cc headers. | |
471 | ||
b4bc034f | 472 | =head1 Reporting Bugs |
fb73857a | 473 | |
474 | If you come across what you think might be a bug in Perl, please report | |
475 | it. There's a script in PERL_ROOT:[UTILS], perlbug, that walks you through | |
476 | the process of creating a bug report. This script includes details of your | |
477 | installation, and is very handy. Completed bug reports should go to | |
9f3f8d50 | 478 | perlbug@perl.com. |
fb73857a | 479 | |
b4bc034f | 480 | =head1 CAVEATS |
fb73857a | 481 | |
482 | Probably the single biggest gotcha in compiling Perl is giving the wrong | |
b4bc034f GS |
483 | switches to MMS/MMK when you build. Use *exactly* what the configure.com |
484 | script prints! | |
485 | ||
486 | The next big gotcha is directory depth. Perl can create directories four, | |
487 | five, or even six levels deep during the build, so you don't have to be | |
dab31494 PP |
488 | too deep to start to hit the RMS 8 level limit (for ODS 2 volumes which were |
489 | common on versions of VMS prior to V7.2 and even with V7.2 on the VAX). | |
490 | It is best to do: | |
b4bc034f GS |
491 | |
492 | DEFINE/TRANS=(CONC,TERM) PERLSRC "disk:[dir.dir.dir.perldir.]" | |
493 | SET DEFAULT PERLSRC:[000000] | |
494 | ||
495 | before building in cases where you have to unpack the distribution so deep | |
496 | (note the trailing period in the definition of PERLSRC). Perl modules | |
497 | from CPAN can be just as bad (or worse), so watch out for them, too. Perl's | |
498 | configuration script will warn if it thinks you are too deep (at least on | |
499 | a VAX or on Alpha versions of VMS prior to 7.2). But MakeMaker will not | |
500 | warn you if you start out building a module too deep in a directory. | |
501 | ||
502 | Be sure that the process that you use to build perl has a PGFLQ greater | |
503 | than 100000. Be sure to have a correct local time zone to UTC offset | |
504 | defined (in seconds) in the logical name SYS$TIMEZONE_DIFFERENTIAL before | |
505 | running the regression test suite. The SYS$MANAGER:UTC$CONFIGURE_TDF.COM | |
506 | procedure will help you set that logical for your system but may require | |
507 | system privileges. For example, a location 5 hours west of UTC (such as | |
508 | the US East coast while not on daylight savings time) would have: | |
509 | ||
510 | DEFINE SYS$TIMEZONE_DIFFERENTIAL "-18000" | |
511 | ||
512 | A final thing that causes trouble is leftover pieces from a failed | |
513 | build. If things go wrong make sure you do a "(MMK|MMS|make) realclean" | |
fb73857a | 514 | before you rebuild. |
515 | ||
a83b6f46 | 516 | =head2 DEC C issues with Perl on VMS |
fb73857a | 517 | |
b4bc034f | 518 | Note to DEC C users: Some early versions (pre-5.2, some pre-4. If you're DEC |
c54e8273 | 519 | C 5.x or higher, with current patches if any, you're fine) of the DECCRTL |
fb73857a | 520 | contained a few bugs which affect Perl performance: |
b4bc034f GS |
521 | |
522 | =over 4 | |
523 | ||
524 | =item - pipes | |
525 | ||
526 | Newlines are lost on I/O through pipes, causing lines to run together. | |
527 | This shows up as RMS RTB errors when reading from a pipe. You can | |
528 | work around this by having one process write data to a file, and | |
529 | then having the other read the file, instead of the pipe. This is | |
530 | fixed in version 4 of DEC C. | |
531 | ||
532 | =item - modf() | |
533 | ||
534 | The modf() routine returns a non-integral value for some values above | |
535 | INT_MAX; the Perl "int" operator will return a non-integral value in | |
536 | these cases. This is fixed in version 4 of DEC C. | |
537 | ||
538 | =item - ALPACRT ECO | |
539 | ||
540 | On the AXP, if SYSNAM privilege is enabled, the CRTL chdir() routine | |
541 | changes the process default device and directory permanently, even | |
542 | though the call specified that the change should not persist after | |
543 | Perl exited. This is fixed by DEC CSC patch ALPACRT04_061 or later. | |
544 | See also: | |
545 | ||
172b4273 | 546 | http://ftp.support.compaq.com/patches/.new/openvms.shtml |
b4bc034f GS |
547 | |
548 | =back | |
549 | ||
550 | Please note that in later versions "DEC C" may also be known as | |
551 | "Compaq C". | |
552 | ||
a83b6f46 | 553 | =head2 GNU issues with Perl on VMS |
b4bc034f GS |
554 | |
555 | It has been a while since the GNU utilities such as GCC or GNU make | |
556 | were used to build perl on VMS. Hence they may require a great deal | |
557 | of source code modification to work again. | |
558 | ||
559 | http://slacvx.slac.stanford.edu/HELP/GCC | |
560 | http://www.progis.de/ | |
b4bc034f GS |
561 | http://www.lp.se/products/gnu.html |
562 | ||
563 | =head1 Mailing Lists | |
564 | ||
565 | There are several mailing lists available to the Perl porter. For VMS | |
fb73857a | 566 | specific issues (including both Perl questions and installation problems) |
b4bc034f | 567 | there is the VMSPERL mailing list. It is usually a low-volume (10-12 |
fb73857a | 568 | messages a week) mailing list. |
569 | ||
1bc81404 CB |
570 | To subscribe, send a mail message to VMSPERL-SUBSCRIBE@PERL.ORG. The VMSPERL |
571 | mailing list address is VMSPERL@PERL.ORG. Any mail sent there gets echoed | |
572 | to all subscribers of the list. There is a searchable archive of the list | |
573 | on the web at: | |
b4bc034f GS |
574 | |
575 | http://www.xray.mpe.mpg.de/mailing-lists/vmsperl/ | |
a83b6f46 | 576 | |
1bc81404 CB |
577 | To unsubscribe from VMSPERL send a message to VMSPERL-UNSUBSCRIBE@PERL.ORG. |
578 | Be sure to do so from the subscribed account that you are canceling. | |
b4bc034f | 579 | |
a83b6f46 | 580 | =head2 Web sites for Perl on VMS |
b4bc034f GS |
581 | |
582 | Vmsperl pages on the web include: | |
583 | ||
584 | http://www.sidhe.org/vmsperl/index.html | |
1bc81404 | 585 | http://www.crinoid.com/ |
b4bc034f | 586 | http://duphy4.physics.drexel.edu/pub/cgi_info.htmlx |
468f45d5 | 587 | http://www.cpan.org/modules/by-module/VMS/ |
60d9c7be | 588 | http://www.xray.mpe.mpg.de/mailing-lists/vmsperl/ |
b4bc034f | 589 | http://www.best.com/~pvhp/vms/ |
adc5a9a5 | 590 | http://www-ang.kfunigraz.ac.at/~binder/perl.html |
60d9c7be PP |
591 | http://lists.perl.org/showlist.cgi?name=vmsperl |
592 | http://archive.develooper.com/vmsperl@perl.org/ | |
adc5a9a5 | 593 | http://www.openvms.compaq.com/openvms/products/ips/apache/csws_modperl.html |
fb73857a | 594 | |
b4bc034f GS |
595 | =head1 SEE ALSO |
596 | ||
597 | Perl information for users and programmers about the port of perl to VMS is | |
598 | available from the [.VMS]PERLVMS.POD file that gets installed as L<perlvms>. | |
599 | For administrators the perlvms document also includes a detailed discussion | |
600 | of extending vmsperl with CPAN modules after Perl has been installed. | |
601 | ||
602 | =head1 AUTHORS | |
603 | ||
adc5a9a5 | 604 | Revised 10-October-2001 by Craig Berry craigberry@mac.com. |
1bc81404 CB |
605 | Revised 25-February-2000 by Peter Prymmer pvhp@best.com. |
606 | Revised 27-October-1999 by Craig Berry craigberry@mac.com. | |
b4bc034f GS |
607 | Revised 01-March-1999 by Dan Sugalski dan@sidhe.org. |
608 | Originally by Charles Bailey bailey@newman.upenn.edu. | |
609 | ||
610 | =head1 ACKNOWLEDGEMENTS | |
fb73857a | 611 | |
612 | A real big thanks needs to go to Charles Bailey | |
b4bc034f | 613 | bailey@newman.upenn.edu, who is ultimately responsible for Perl 5.004 |
fb73857a | 614 | running on VMS. Without him, nothing the rest of us have done would be at |
615 | all important. | |
616 | ||
617 | There are, of course, far too many people involved in the porting and testing | |
618 | of Perl to mention everyone who deserves it, so please forgive us if we've | |
619 | missed someone. That said, special thanks are due to the following: | |
b4bc034f GS |
620 | |
621 | Tim Adye T.J.Adye@rl.ac.uk | |
fb73857a | 622 | for the VMS emulations of getpw*() |
b4bc034f | 623 | David Denholm denholm@conmat.phys.soton.ac.uk |
fb73857a | 624 | for extensive testing and provision of pipe and SocketShr code, |
b4bc034f | 625 | Mark Pizzolato mark@infocomm.com |
fb73857a | 626 | for the getredirection() code |
b4bc034f | 627 | Rich Salz rsalz@bbn.com |
fb73857a | 628 | for readdir() and related routines |
b4bc034f | 629 | Peter Prymmer pvhp@best.com |
fb73857a | 630 | for extensive testing, as well as development work on |
631 | configuration and documentation for VMS Perl, | |
b4bc034f | 632 | Dan Sugalski dan@sidhe.org |
fb73857a | 633 | for extensive contributions to recent version support, |
634 | development of VMS-specific extensions, and dissemination | |
635 | of information about VMS Perl, | |
636 | the Stanford Synchrotron Radiation Laboratory and the | |
637 | Laboratory of Nuclear Studies at Cornell University for | |
9f3f8d50 | 638 | the opportunity to test and develop for the AXP, |
a3ef2c6f GS |
639 | John Hasstedt John.Hasstedt@sunysb.edu |
640 | for VAX VMS V7.2 support | |
b4bc034f | 641 | |
fb73857a | 642 | and to the entire VMSperl group for useful advice and suggestions. In |
643 | addition the perl5-porters deserve credit for their creativity and | |
644 | willingness to work with the VMS newcomers. Finally, the greatest debt of | |
b4bc034f | 645 | gratitude is due to Larry Wall larry@wall.org, for having the ideas which |
fb73857a | 646 | have made our sleepless nights possible. |
647 | ||
648 | Thanks, | |
649 | The VMSperl group | |
b4bc034f GS |
650 | |
651 | =cut | |
652 |