perl.git
22 years agoperl 5.003_04: os2/os2ish.h
Perl 5 Porters [Thu, 29 Aug 1996 22:24:29 +0000 (22:24 +0000)] 
perl 5.003_04: os2/os2ish.h

SH_PATH_INI added (needed to redefine SH_PATH for binary
    distribution).
SH_PATH is redefined.

22 years agoSH_PATH_INI vs. BIN_SH
Perl 5 Porters [Thu, 29 Aug 1996 22:17:56 +0000 (22:17 +0000)] 
SH_PATH_INI vs. BIN_SH

22 years agoperllib vs. LIBPERL
Perl 5 Porters [Thu, 29 Aug 1996 22:17:45 +0000 (22:17 +0000)] 
perllib vs. LIBPERL

23 years agoRe: truncate with file name does not work (with patch)
Perl 5 Porters [Wed, 28 Aug 1996 02:37:41 +0000 (02:37 +0000)] 
Re: truncate with file name does not work (with patch)

The prototype for truncate was changed so that perl won't die
with C<use strict;> when the first arg is a bareword (filehandle).
I think it was Tom (as in "tchrist") who brought this up.

Here's a patch that undoes the damage, makes it work with
C<use strict;>, and adds to the testsuite.

22 years agoUpdated. See opcode.pl.
Perl 5 Porters [Thu, 29 Aug 1996 09:28:26 +0000 (09:28 +0000)] 
Updated.  See opcode.pl.

23 years agoUpdate perlio-related variables.
Perl 5 Porters [Thu, 29 Aug 1996 01:58:44 +0000 (01:58 +0000)] 
Update perlio-related variables.

22 years agoFAKE typeglobs seriously busted (with patch)
Perl 5 Porters [Sun, 1 Sep 1996 22:02:06 +0000 (22:02 +0000)] 
FAKE typeglobs seriously busted (with patch)

Handling of fake typeglobs (scalars that are really globs
in disguise) is seriously busted since 5.002 (it wasn't
so in 5.001n).
The problem is that mg_get() on a glob calls gv_efullname()
which might coerce its first arg to a string.

Sub-critical patch to conceivably fix some %SIG problems. (Shared hash key
weren't being properly detected by some of the sig magic, but as shared
hash keys wouldn't normally be used in %SIG it's unlikely this is a
significant problem.)

This patch changes neither behavior nor performance.  However, it does
reduce code size and improve maintainability by combining some common
code in gv_fullname() and gv_efullname().

22 years agoperl 5.003_04: malloc.c
Perl 5 Porters [Thu, 29 Aug 1996 09:12:59 +0000 (09:12 +0000)] 
perl 5.003_04: malloc.c

A patch to perl5.003_02/malloc to give a sensible error abort() message
in ANSI C, and to give it to stderr instead of stdout.

Use config_h's STRINGIFY macro instead of pre-ANSI "p".

23 years agoperl 5.003_04: lib/perl5db.pl
Perl 5 Porters [Wed, 28 Aug 1996 03:19:54 +0000 (03:19 +0000)] 
perl 5.003_04: lib/perl5db.pl

Ilya's debugger patch.
Undefined subroutine &Carp::longmess called at
    /opt/perl5.003_03/lib/perl5db.pl line 1423.

Make perl5db compatible with the recent 'strict refs' enforcement
in %SIG.

23 years agoperl 5.003_04: lib/Test/Harness.pm
Perl 5 Porters [Thu, 29 Aug 1996 01:53:45 +0000 (01:53 +0000)] 
perl 5.003_04: lib/Test/Harness.pm

Add a return value to runtests - non-zero if all tests ran ok,
zero otherwise.

22 years agoperl 5.003_04: lib/ExtUtils/xsubpp
Perl 5 Porters [Fri, 30 Aug 1996 01:53:30 +0000 (01:53 +0000)] 
perl 5.003_04: lib/ExtUtils/xsubpp

Fix SCOPE?  (See pod/perlxs.pod).
Up version number to 1.938.

22 years ago.C$(obj_ext) removed under OS/2 - conflicts with .c$(obj_ext).
Perl 5 Porters [Thu, 29 Aug 1996 22:17:02 +0000 (22:17 +0000)] 
.C$(obj_ext) removed under OS/2 - conflicts with .c$(obj_ext).

22 years agoperl 5.003_04: hints/ultrix_4.sh
Perl 5 Porters [Thu, 29 Aug 1996 22:35:13 +0000 (22:35 +0000)] 
perl 5.003_04: hints/ultrix_4.sh

Don't call optimize=-g, just call optimize=none.  The -g
pulls in -DDEBUGGING, which might not be wanted.

22 years agoFixes for sh vs. bin_sh + cleanup.
Perl 5 Porters [Thu, 29 Aug 1996 22:16:48 +0000 (22:16 +0000)] 
Fixes for sh vs. bin_sh + cleanup.

22 years agoperl 5.003_04: hints/irix_6_2.sh hints/mpeix.sh
Perl 5 Porters [Thu, 29 Aug 1996 22:34:35 +0000 (22:34 +0000)] 
perl 5.003_04: hints/irix_6_2.sh hints/mpeix.sh

Change optimize=-g to optimize=none to avoid pulling in -DDEBUGGING,
unless that's what the user really wants.

23 years agoRemove the d_bsdpgrp hint. The defaults should be ok.
Perl 5 Porters [Wed, 28 Aug 1996 01:11:26 +0000 (01:11 +0000)] 
Remove the d_bsdpgrp hint.  The defaults should be ok.

22 years agoPatch for LONG_MAX & co.
Perl 5 Porters [Sun, 1 Sep 1996 22:35:00 +0000 (22:35 +0000)] 
Patch for LONG_MAX & co.

Sorry about adding yet another #ifdef forest, but hopefully this
should resolve the *_MAX issues permanently. It adds to the
previously defined PERL_LONG_MAX, PERL_LONG_MIN, and PERL_ULONG_MAX
symbols the complete set of
/PERL_U?(CHAR|SHORT|INT|LONG)_(MAX|MIN)/, and installs aliases to
those from /(I|U)(8|16|32|V)_(MAX|MIN)/ so that for any standard
Perl typedef, like I32 or UV, you can reference I32_MAX or UV_MIN,
and get appropriate figures. All references to LONG_(MIN|MAX) are
changed appropriately.

The .c changes have the side effect of making cast_uv properly use quad
limits if quads are in use, but longs aren't 64 bit. Hopefully this all
works, but I don't have any handy Crays to try it out on.

Add notes on perl's internal types, specifically Quad_t and IV.

23 years agoRe: glob in Safe compartment allows shell access
Perl 5 Porters [Wed, 28 Aug 1996 03:23:45 +0000 (03:23 +0000)] 
Re: glob in Safe compartment allows shell access

I've moved the glob op into the same opcode tag as backticks and system
and added a comment.

22 years agoperl 5.003_04: ext/IO/lib/IO/File.pm
Perl 5 Porters [Thu, 29 Aug 1996 10:20:23 +0000 (10:20 +0000)] 
perl 5.003_04: ext/IO/lib/IO/File.pm

This patch fixes a bug observed by Tom Christiansen: IO::File::new
didn't allow for file permissions after the file mode.  Here's a patch.

This patch documents the behavior of IO::File::{new,open} with
regard to open modes.  It also documents the exportation of Fcntl
constants.

23 years agoperl 5.003_04: ext/FileHandle/FileHandle.pm
Perl 5 Porters [Thu, 29 Aug 1996 02:55:08 +0000 (02:55 +0000)] 
perl 5.003_04: ext/FileHandle/FileHandle.pm

This patch documents the behavior of FileHandle::{new,open} with
regard to open modes.  It also documents the exportation of Fcntl
constants.

This patch fixes a bug observed by Tom Christiansen: FileHandle::new
didn't allow for file permissions after the file mode.  Here's a patch.

22 years agoperl 5.003_04: dump.c gv.c op.c pp_ctl.c pp_sys.c proto.h run.c
Perl 5 Porters [Sun, 1 Sep 1996 22:00:43 +0000 (22:00 +0000)] 
perl 5.003_04: dump.c gv.c op.c pp_ctl.c pp_sys.c proto.h run.c

This patch changes neither behavior nor performance.  However, it does
reduce code size and improve maintainability by combining some common
code in gv_fullname() and gv_efullname().

22 years agoperl 5.003_04: config_h.SH
Perl 5 Porters [Thu, 29 Aug 1996 22:32:23 +0000 (22:32 +0000)] 
perl 5.003_04: config_h.SH

Change /*#define../**/ into /*#define../ **/
to make IBM's xlc compiler shut up about nested comments.
The /*#define FOO /**/ is a perfectly legal un-nested comment, and
I wish IBM would fix it's blasted compiler instead.  In the meantime
we'll take mercy on the poor AIX user and get rid of the screenfulls
of stupid warning messages.  Thanks to Hallvard B Furuseth
<h.b.furuseth@usit.uio.no> for the fix.

22 years agoUpdated. Note new comments to make AIX happy.
Perl 5 Porters [Fri, 30 Aug 1996 03:05:52 +0000 (03:05 +0000)] 
Updated.  Note new comments to make AIX happy.

23 years agorandom cleanup
Perl 5 Porters [Wed, 28 Aug 1996 02:44:46 +0000 (02:44 +0000)] 
random cleanup

This patch removes a few obvious redundancies in the source.

22 years agoUpdated.
Perl 5 Porters [Fri, 30 Aug 1996 01:51:08 +0000 (01:51 +0000)] 
Updated.

22 years agoperl 5.003_04: Makefile.SH
Perl 5 Porters [Thu, 29 Aug 1996 22:17:13 +0000 (22:17 +0000)] 
perl 5.003_04: Makefile.SH

For building shared libperl, relocate whole rule to
inside the if test -f $osname/Makefile.SHs case.

22 years agoperl 5.003_04: MANIFEST
Perl 5 Porters [Thu, 29 Aug 1996 22:34:02 +0000 (22:34 +0000)] 
perl 5.003_04: MANIFEST

os2/notes removed

obsolete hints/dnix.sh removed.

New typeglob test.

22 years agoperl 5.003_04: INSTALL
Perl 5 Porters [Fri, 30 Aug 1996 01:28:21 +0000 (01:28 +0000)] 
perl 5.003_04: INSTALL

Change name of shared perl library to libperl, instead of
libperl5.

Add notes about fragility of shared libperl and the usefulness
of archlib to separate different binaries.

22 years agoperl 5.003_04: Configure
Perl 5 Porters [Thu, 29 Aug 1996 22:32:23 +0000 (22:32 +0000)] 
perl 5.003_04: Configure

Change name of shared libperl library back to libperl.so.xxx,
so that a simple -lperl picks up either libperl.a or
libperl.so.xxx.

Check if $sh='' in case we've reloaded an old config.sh

22 years agoUpdated for 5.003_04.
Perl 5 Porters [Mon, 2 Sep 1996 03:16:25 +0000 (03:16 +0000)] 
Updated for 5.003_04.

23 years agoSUBVERSION 4.
Perl 5 Porters [Wed, 28 Aug 1996 22:33:44 +0000 (22:33 +0000)] 
SUBVERSION 4.

23 years agoperl 5.003_03: [patch introduction and re-organisation] perl-5.003_03
Andy Dougherty [Sun, 25 Aug 1996 01:27:42 +0000 (01:27 +0000)] 
perl 5.003_03: [patch introduction and re-organisation]

# This is my patch perl5.003_03.pat to perl5.003_02
# The full description is below.
# Please execute the following commands before applying this patch.
# (You can feed this patch to 'sh' to do so.)
#  Andy Dougherty               <doughera@lafcol.lafayette.edu>

# Absorbed into Changes5.002
rm -f Changes.Conf

# Not needed.
rm -f ext/POSIX/mkposixman.pl

# Moved to README.os2.  I'm not sure why the README files are
# here rather than in the appropriate subdirectories.
rm -f os2/README

# Not needed.
rm -f pod/Makefile.PL

# New test for bit ops
touch t/op/bop.t

# Patches that create new tests don't always make them executable.
chmod +x t/*/*.t

# Create a new directory for Porting and Patching info.
mkdir Porting

exit 0

This is patch perl5.003_03.pat to perl version 5.003_02.
This takes you from 5.003_02 to 5.003_03.

To apply this patch, run the above commands,
cd to your perl source directory and then type

        patch -p1 -N < perl5.003_03.pat

The changes are described after each /^Index/ line below.  This is
designed so you can examine each change with a command such as

        csplit -k perl5.003_03.pat '/^Index:/' '{99}'

Patch and enjoy,

    Andy Dougherty              doughera@lafcol.lafayette.edu
    Dept. of Physics
    Lafayette College, Easton PA 18042

23 years agoperl 5.003_03: x2p/str.c
Perl 5 Porters [Fri, 16 Aug 1996 00:27:34 +0000 (00:27 +0000)] 
perl 5.003_03: x2p/str.c

Use Configure's FILE_filbuf macro instead of a raw _filbuf.

----------------
Version 5.003_02

23 years agoKeep 5.003's RCS info.
Perl 5 Porters [Fri, 16 Aug 1996 10:46:55 +0000 (10:46 +0000)] 
Keep 5.003's RCS info.

23 years agoperl 5.003_03: x2p/Makefile.SH
Perl 5 Porters [Mon, 19 Aug 1996 00:56:38 +0000 (00:56 +0000)] 
perl 5.003_03: x2p/Makefile.SH

Use Configure's $sh and $make_set_make.

Remove MAB stuff, since it's now in ccflags.

Keep 5.003's RCS info.

23 years agoperl 5.003_03: writemain.SH
Perl 5 Porters [Fri, 16 Aug 1996 10:45:14 +0000 (10:45 +0000)] 
perl 5.003_03: writemain.SH

Remove unnecessary curlies.  (They are a leftover from
an older auto_init mechanism.)

23 years agoperl 5.003_03: utils/h2ph.PL
Perl 5 Porters [Mon, 19 Aug 1996 00:52:35 +0000 (00:52 +0000)] 
perl 5.003_03: utils/h2ph.PL

Make h2ph architecture-independent by using Config at run-time
rather than extraction time.

23 years agoperl 5.003_03: util.c
Perl 5 Porters [Mon, 19 Aug 1996 00:51:33 +0000 (00:51 +0000)] 
perl 5.003_03: util.c

Include <unistd.h>.

Use correct types for safe*alloc and safefree functions.

23 years agoperl 5.003_03: toke.c
Perl 5 Porters [Mon, 19 Aug 1996 00:50:55 +0000 (00:50 +0000)] 
perl 5.003_03: toke.c

Include <unistd.h>.

Use memcmp instead of bcmp even when we don't care about order.

23 years agoperl 5.003_03: t/op/split.t
Perl 5 Porters [Sun, 25 Aug 1996 00:14:19 +0000 (00:14 +0000)] 
perl 5.003_03: t/op/split.t

If a regex supplied to split() contains paranthesized subpatterns
that can result in null matches, perl coredumps.

23 years agoSupport bit operations on strings longer than 15 bytes.
Perl 5 Porters [Sun, 25 Aug 1996 00:23:01 +0000 (00:23 +0000)] 
Support bit operations on strings longer than 15 bytes.

23 years agoUse memcmp instead of bcmp even when we don't care about order.
Perl 5 Porters [Mon, 19 Aug 1996 00:46:59 +0000 (00:46 +0000)] 
Use memcmp instead of bcmp even when we don't care about order.

23 years agoFix safe*alloc and safefree prototypes.
Perl 5 Porters [Mon, 19 Aug 1996 00:44:34 +0000 (00:44 +0000)] 
Fix safe*alloc and safefree prototypes.

23 years agoperl 5.003_03: pp_sys.c
Perl 5 Porters [Thu, 22 Aug 1996 02:15:39 +0000 (02:15 +0000)] 
perl 5.003_03: pp_sys.c

Include <unistd.h>, <sys/wait.h>, and <sys/resource.h>.
(The latter two are especially for NetBSD.)

Don't assume sys/time.h and sys/select.h can't coexist.

Use Pause macro.

23 years agoperl 5.003_03: pp_hot.c
Perl 5 Porters [Sun, 25 Aug 1996 00:01:52 +0000 (00:01 +0000)] 
perl 5.003_03: pp_hot.c

Use memcmp instead of bcmp even when we don't care about order.

Add support for tied filehandles.

23 years agoperl 5.003_03: pp.c
Perl 5 Porters [Sun, 25 Aug 1996 00:13:55 +0000 (00:13 +0000)] 
perl 5.003_03: pp.c

Add support for tied filehandles.

If a regex supplied to split() contains paranthesized subpatterns
that can result in null matches, perl coredumps.

23 years agoFix a minor nit regarding Exporter.
Perl 5 Porters [Sun, 25 Aug 1996 00:08:57 +0000 (00:08 +0000)] 
Fix a minor nit regarding Exporter.

23 years agoperl 5.003_03: pod/perlipc.pod
Perl 5 Porters [Sun, 25 Aug 1996 00:19:05 +0000 (00:19 +0000)] 
perl 5.003_03: pod/perlipc.pod

Fix typo.

Untaint port number.

23 years agoUpdate.
Perl 5 Porters [Mon, 19 Aug 1996 22:41:17 +0000 (22:41 +0000)] 
Update.

23 years agoDelete duplicate line.
Perl 5 Porters [Fri, 16 Aug 1996 10:02:03 +0000 (10:02 +0000)] 
Delete duplicate line.

23 years agoRestore use of Safefree() macro.
Perl 5 Porters [Mon, 19 Aug 1996 00:41:46 +0000 (00:41 +0000)] 
Restore use of Safefree() macro.

23 years agoperl 5.003_03: perlio.h
Perl 5 Porters [Wed, 21 Aug 1996 02:08:36 +0000 (02:08 +0000)] 
perl 5.003_03: perlio.h

Try to document the various #defines a bit.  This is far from
finished.

Remove a lot of trailing whitespace.  (It's of no consequence, but
but I'm not going to redo the patch just to put back in the trailing
whitespace either.)

23 years agoFixes to support non-std stdio.
Perl 5 Porters [Sun, 25 Aug 1996 00:21:17 +0000 (00:21 +0000)] 
Fixes to support non-std stdio.

23 years agoperl 5.003_03: perl.h
Perl 5 Porters [Sun, 25 Aug 1996 00:24:27 +0000 (00:24 +0000)] 
perl 5.003_03: perl.h

No longer prefer bcmp slightly for comparisons that don't care
about ordering.

Rely on Configure setting SH_PATH.

Change the function name to Pause() instead of pause() to
avoid potential prototype problems.  (This naming convention
is similar to the Fwrite and Fflush macros.)

Fix problems with each() on tied hashes.

Work around crypt prototype problem on NeXT.

23 years agoInclude <unistd.h>
Perl 5 Porters [Wed, 21 Aug 1996 22:21:56 +0000 (22:21 +0000)] 
Include <unistd.h>

23 years agoperl 5.003_03: mg.c
Perl 5 Porters [Mon, 19 Aug 1996 00:36:12 +0000 (00:36 +0000)] 
perl 5.003_03: mg.c

Include <unistd.h>

Use Safefree() macro instead of safefree() function with
a (possibly) incorrect cast.  The whole point of the
Safefree() macro is that it does the correct cast for you.

23 years agoUse Configure's $sh and $make_set_make variables.
Perl 5 Porters [Mon, 19 Aug 1996 00:36:12 +0000 (00:36 +0000)] 
Use Configure's $sh and $make_set_make variables.

23 years agoAdd explicit '&' to avoid warnings under strict refs.
Perl 5 Porters [Sat, 24 Aug 1996 23:52:03 +0000 (23:52 +0000)] 
Add explicit '&' to avoid warnings under strict refs.

23 years agoRemove double 'use strict'.
Perl 5 Porters [Sat, 24 Aug 1996 23:52:09 +0000 (23:52 +0000)] 
Remove double 'use strict'.

23 years agoperl 5.003_03: lib/Symbol.pm
Perl 5 Porters [Fri, 26 Apr 1996 00:57:26 +0000 (00:57 +0000)] 
perl 5.003_03: lib/Symbol.pm

Put back in the BEGIN { require 5.002; }.  The version in
5.003_02 wouldn't work in 5.002 anyway.  Further, the whole
point of the construct is to catch 5.001m, so we can't use
syntax introduced after 5.001m to do that.

23 years agoRemove mab references.
Perl 5 Porters [Thu, 22 Aug 1996 03:02:56 +0000 (03:02 +0000)] 
Remove mab references.

23 years agoperl 5.003_03: lib/ExtUtils/MM_Unix.pm
Perl 5 Porters [Wed, 21 Aug 1996 23:38:07 +0000 (23:38 +0000)] 
perl 5.003_03: lib/ExtUtils/MM_Unix.pm

Remove MAB references.

Use 'useshrplib' instead of 'd_shrplib'

23 years agoperl 5.003_03: installperl
Perl 5 Porters [Sun, 25 Aug 1996 00:07:30 +0000 (00:07 +0000)] 
perl 5.003_03: installperl

Simplify installation of shared libperl.so.

Avoid reaching Command Failed!!! with /usr/bin/perl.

23 years agoperl 5.003_03: hv.c
Perl 5 Porters [Sun, 25 Aug 1996 00:11:47 +0000 (00:11 +0000)] 
perl 5.003_03: hv.c

Use memcmp even in cases where ordering doesn't matter.

Fix problems with each() on tied hashes.

23 years agoNew hint file.
Perl 5 Porters [Tue, 20 Aug 1996 08:51:58 +0000 (08:51 +0000)] 
New hint file.

23 years agoperl 5.003_03: hints/titanos.sh
Perl 5 Porters [Fri, 23 Aug 1996 01:15:08 +0000 (01:15 +0000)] 
perl 5.003_03: hints/titanos.sh

Include sfio in libswanted.

Don't set libpth any more.

23 years agoperl 5.003_03: hints/sunos_4_1.sh
Perl 5 Porters [Fri, 19 Jul 1996 01:51:04 +0000 (01:51 +0000)] 
perl 5.003_03: hints/sunos_4_1.sh

Add brief note about GNU as and ld.

Don't include <unistd.h>

Add notes about WHOA THERE messages.

23 years agoDon't include <unistd.h>
Perl 5 Porters [Mon, 15 Jul 1996 20:46:37 +0000 (20:46 +0000)] 
Don't include <unistd.h>

23 years agoperl 5.003_03: hints/solaris_2.sh
Perl 5 Porters [Fri, 16 Aug 1996 03:08:58 +0000 (03:08 +0000)] 
perl 5.003_03: hints/solaris_2.sh

Perl.h no longer prefers bcmp, so it's again ok if Configure
finds them, since perl will prefer the mem* versions anyway.

23 years agoperl 5.003_03: hints/sco.sh
Perl 5 Porters [Fri, 16 Aug 1996 02:59:59 +0000 (02:59 +0000)] 
perl 5.003_03: hints/sco.sh

Additional notes on using icc.

Additional flags for dynamic loading.

23 years agoperl 5.003_03: hints/os2.sh
Perl 5 Porters [Wed, 21 Aug 1996 03:36:04 +0000 (03:36 +0000)] 
perl 5.003_03: hints/os2.sh

Try to update to reflect newer shared libperl stuff.
I probably goofed :-).

23 years agoperl 5.003_03: hints/next_4.sh
Perl 5 Porters [Fri, 23 Aug 1996 01:09:02 +0000 (01:09 +0000)] 
perl 5.003_03: hints/next_4.sh

Get rid of extraneous isnext_4 variable.  Configure and
Makefile.SH will use $osname and $osvers instead.

Build up $mab dynamically based on available architectures.

Absorb $mab into ccflags and ccdlflags.  I hope that will
cover everything.  (Configure should automatically remove
the -arch stuff from cppflags.)

Configure now knows next4 needs to use a shared libperl.5.so.

Allow users to use -Dprefix.

23 years agoperl 5.003_03: hints/next_3.sh
Perl 5 Porters [Wed, 21 Aug 1996 23:26:09 +0000 (23:26 +0000)] 
perl 5.003_03: hints/next_3.sh

Build up $mab dynamically.  Since $mab isn't used anywhere
anymore, this is useless.  However, $mab was never used for
next_3.sh anyway, so there's been no change in functionality.

23 years agoUse glibpth instead of libpth.
Perl 5 Porters [Fri, 23 Aug 1996 01:12:22 +0000 (01:12 +0000)] 
Use glibpth instead of libpth.

23 years agoUpdate where to find dld.
Perl 5 Porters [Mon, 12 Aug 1996 23:31:37 +0000 (23:31 +0000)] 
Update where to find dld.

23 years agoConfigure now tests gcvt() more thoroughly.
Perl 5 Porters [Thu, 20 Jun 1996 22:12:12 +0000 (22:12 +0000)] 
Configure now tests gcvt() more thoroughly.

23 years agoInclude some info on cc -n32 compile.
Perl 5 Porters [Fri, 23 Aug 1996 01:11:32 +0000 (01:11 +0000)] 
Include some info on cc -n32 compile.

23 years agoperl 5.003_03: hints/epix.sh
Perl 5 Porters [Fri, 23 Aug 1996 01:12:52 +0000 (01:12 +0000)] 
perl 5.003_03: hints/epix.sh

Use glibpth instead of libpth.  This allows Configure to
add local directories, such as /opt/local/lib, etc.

23 years agoperl 5.003_03: hints/dynixptx.sh
Perl 5 Porters [Wed, 21 Aug 1996 03:32:01 +0000 (03:32 +0000)] 
perl 5.003_03: hints/dynixptx.sh

Fix typo in comment.

Configure will now automatically detect shared libperl stuff.

23 years agoConfigure will now automatically detect shared libperl stuff.
Perl 5 Porters [Wed, 21 Aug 1996 03:28:07 +0000 (03:28 +0000)] 
Configure will now automatically detect shared libperl stuff.

23 years agoqmaxmem hint doesn't apply to gcc.
Perl 5 Porters [Wed, 17 Jul 1996 07:46:05 +0000 (07:46 +0000)] 
qmaxmem hint doesn't apply to gcc.

23 years agoperl 5.003_03: hints/README.hints
Perl 5 Porters [Fri, 23 Aug 1996 01:37:29 +0000 (01:37 +0000)] 
perl 5.003_03: hints/README.hints

Remove out-of-date info.

Document a bit about how hint files work.

23 years agoperl 5.003_03: handy.h
Perl 5 Porters [Tue, 20 Aug 1996 10:38:54 +0000 (10:38 +0000)] 
perl 5.003_03: handy.h

Change safe*alloc functions to have prototypes that
match the system's malloc and free types.  That is, use
Malloc_t instead of char *, and Free_t instead of void.
This is necessary so . . .

Safefree cast matches type of free() whether it's perl's
malloc/free or the system's malloc/free.

23 years agoFix problems with each() on tied hashes.
Perl 5 Porters [Sun, 25 Aug 1996 00:11:47 +0000 (00:11 +0000)] 
Fix problems with each() on tied hashes.

23 years agoperl 5.003_03: ext/util/make_ext
Perl 5 Porters [Fri, 21 Jun 1996 01:45:33 +0000 (01:45 +0000)] 
perl 5.003_03: ext/util/make_ext

Typo change.
Get rid of unused altmake.

23 years agoChange the Mymalloc to match Perl_malloc in perl.h.
Perl 5 Porters [Tue, 20 Aug 1996 09:30:46 +0000 (09:30 +0000)] 
Change the Mymalloc to match Perl_malloc in perl.h.

23 years agoAdd support for tied filehandles.
Perl 5 Porters [Sun, 25 Aug 1996 00:01:52 +0000 (00:01 +0000)] 
Add support for tied filehandles.

23 years agoClean up docmentation installation errors.
Perl 5 Porters [Sat, 24 Aug 1996 23:56:18 +0000 (23:56 +0000)] 
Clean up docmentation installation errors.

23 years agoExpand warning at the top.
Perl 5 Porters [Mon, 19 Aug 1996 00:12:56 +0000 (00:12 +0000)] 
Expand warning at the top.

23 years agoAuto-generated.
Perl 5 Porters [Sun, 25 Aug 1996 00:33:47 +0000 (00:33 +0000)] 
Auto-generated.

23 years agoperl 5.003_03: doop.c
Perl 5 Porters [Sun, 25 Aug 1996 00:23:01 +0000 (00:23 +0000)] 
perl 5.003_03: doop.c

No longer prefer bcmp over memcmp when order doesn't matter.

Support bit operations on strings longer than 15 bytes.

23 years agoPossibly Include <signal.h> and <unistd.h>
Perl 5 Porters [Mon, 19 Aug 1996 00:10:02 +0000 (00:10 +0000)] 
Possibly Include <signal.h> and <unistd.h>

23 years agoperl 5.003_03: config_h.SH
Perl 5 Porters [Fri, 23 Aug 1996 02:02:03 +0000 (02:02 +0000)] 
perl 5.003_03: config_h.SH

Updated to match current Configure and config_h.SH.
Some rearrangement of parts has occurred due to new
dependencies in the metaconfig units.

Include full descriptions of ARCHLIB, OLDARCHLIB, PRIVLIB,
SITEARCH, and SITELIB.  Previous versions just included the
~-expanded names (with unhelpful descriptions).  No functionality
is changed, but maybe it's a little better documented now.

23 years agoperl 5.003_03: config_H
Perl 5 Porters [Sat, 24 Aug 1996 22:16:23 +0000 (22:16 +0000)] 
perl 5.003_03: config_H

Updated to match current Configure and config_h.SH.
Some rearrangement of parts has occurred due to new
dependencies in the metaconfig units.

23 years agoReplace old README.os2 with more up-to-date os2/README.
Perl 5 Porters [Mon, 19 Aug 1996 00:36:25 +0000 (00:36 +0000)] 
Replace old README.os2 with more up-to-date os2/README.

23 years agoperl 5.003_03: dev/null
Perl 5 Porters [Wed, 21 Aug 1996 23:35:13 +0000 (23:35 +0000)] 
perl 5.003_03: dev/null

New file describing all the config.sh variables.
Eventually, I hope to fill this directory with other useful
stuff.

23 years agoperl 5.003_03: Makefile.SH
Perl 5 Porters [Fri, 23 Aug 1996 02:43:28 +0000 (02:43 +0000)] 
perl 5.003_03: Makefile.SH

Support the new simplified shared libperl mechanism.

Use new $make_set_make directive.

Remove redundant libperl Make variable.

Remove unnecessary MAB variable.

Remove dependency of minitest on lib/Config.pm, since it could
well have been a failure of configpm that inspired testing
miniperl in the first place!

23 years agoperl 5.003_03: MANIFEST
Perl 5 Porters [Sun, 25 Aug 1996 00:36:58 +0000 (00:36 +0000)] 
perl 5.003_03: MANIFEST

Updated.  5.003_02 introduced some massive patches, mostly
due to spacing changes.  I didn't bother to sort them all out;
I just started with 5.003's MANIEFST.

23 years agoperl 5.003_03: INSTALL
Perl 5 Porters [Thu, 22 Aug 1996 03:11:00 +0000 (03:11 +0000)] 
perl 5.003_03: INSTALL

Add note about space requirements.

Update to match Configure changes (Opcode vs. Safe,
useperlio, useshrplib, etc.)

Reorganize the structure of some of the hints.

Miscellaneous clarifications.

23 years agoperl 5.003_03: Configure
Perl 5 Porters [Fri, 23 Aug 1996 02:02:03 +0000 (02:02 +0000)] 
perl 5.003_03: Configure

Relaxed warning about ksh on exotic machines.

Changed usesafe to useopcode.

Add search for gzip and zip.

Look more carefully for $sh (the Bourne-ish shell).
Use that info to set $startsh correctly.

Change prompts for PerlIO interface.  See INSTALL
for how this is supposed to work.  The default is
still the same as in 5.003_02, namely don't use
any fancy new PerlIO stuff.

Don't look for sigvec() since we don't actually use it.
(Plus, it used to print an alarming misleading message about
race conditions.)

Look for stdio's _filbuf under the possible names of
_filbuf, __filbuf, and _fill.

New $useshrplib variable to control whether we build a shared
libperl.so.  The name of the library is in $libperl.
Always install it in $installarchlib/CORE/$libperl.

Check for <sys/resource.h> and <sys/wait.h> for NetBSD.

Replace old $altmake stuff with newer autoconf-ish
$make_set_make, which checks if $make sets $(MAKE).  Now you
choose an alternate make with sh Configure -Dmake=gmake (or
whatever).

Remove 'ln' for the list of essential commands.  Simulate
it with 'cp' if necessary.

Change `logname` prompts to handle extra gratuitous spaces in
Ultrix output.

Autodetect os2.

Fix silly bug in checking for fully-qualified names in /etc/hosts.

Generalize Gconvert tests.  Give correct and more useful
error messages.

Use $obj_ext instead of literal '.o' in the dynaloader test.

Include appropriate header files in bcopy() and memcpy()
tests.  Note whether memmove is available.

Check whether struct sigaction works (needed for Solaris 2.5
with -Xc).

Include appropriate header files for randbits test.