use non-dev version for Safe
[perl.git] / cop.h
1 /*    cop.h
2  *
3  *    Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
4  *    2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 by Larry Wall and others
5  *
6  *    You may distribute under the terms of either the GNU General Public
7  *    License or the Artistic License, as specified in the README file.
8  *
9  * Control ops (cops) are one of the two ops OP_NEXTSTATE and OP_DBSTATE,
10  * that (loosely speaking) are separate statements.
11  * They hold information important for lexical state and error reporting.
12  * At run time, PL_curcop is set to point to the most recently executed cop,
13  * and thus can be used to determine our current state.
14  */
15
16 /* A jmpenv packages the state required to perform a proper non-local jump.
17  * Note that there is a PL_start_env initialized when perl starts, and
18  * PL_top_env points to this initially, so PL_top_env should always be
19  * non-null.
20  *
21  * Existence of a non-null PL_top_env->je_prev implies it is valid to call
22  * longjmp() at that runlevel (we make sure PL_start_env.je_prev is always
23  * null to ensure this).
24  *
25  * je_mustcatch, when set at any runlevel to TRUE, means eval ops must
26  * establish a local jmpenv to handle exception traps.  Care must be taken
27  * to restore the previous value of je_mustcatch before exiting the
28  * stack frame iff JMPENV_PUSH was not called in that stack frame.
29  * GSAR 97-03-27
30  */
31
32 struct jmpenv {
33     struct jmpenv *     je_prev;
34     Sigjmp_buf          je_buf;         /* only for use if !je_throw */
35     int                 je_ret;         /* last exception thrown */
36     bool                je_mustcatch;   /* need to call longjmp()? */
37 };
38
39 typedef struct jmpenv JMPENV;
40
41 #ifdef OP_IN_REGISTER
42 #define OP_REG_TO_MEM   PL_opsave = op
43 #define OP_MEM_TO_REG   op = PL_opsave
44 #else
45 #define OP_REG_TO_MEM   NOOP
46 #define OP_MEM_TO_REG   NOOP
47 #endif
48
49 /*
50  * How to build the first jmpenv.
51  *
52  * top_env needs to be non-zero. It points to an area
53  * in which longjmp() stuff is stored, as C callstack
54  * info there at least is thread specific this has to
55  * be per-thread. Otherwise a 'die' in a thread gives
56  * that thread the C stack of last thread to do an eval {}!
57  */
58
59 #define JMPENV_BOOTSTRAP \
60     STMT_START {                                \
61         Zero(&PL_start_env, 1, JMPENV);         \
62         PL_start_env.je_ret = -1;               \
63         PL_start_env.je_mustcatch = TRUE;       \
64         PL_top_env = &PL_start_env;             \
65     } STMT_END
66
67 /*
68  *   PERL_FLEXIBLE_EXCEPTIONS
69  * 
70  * All the flexible exceptions code has been removed.
71  * See the following threads for details:
72  *
73  *   http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2004-07/msg00378.html
74  * 
75  * Joshua's original patches (which weren't applied) and discussion:
76  * 
77  *   http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01396.html
78  *   http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01489.html
79  *   http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01491.html
80  *   http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01608.html
81  *   http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02144.html
82  *   http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02998.html
83  * 
84  * Chip's reworked patch and discussion:
85  * 
86  *   http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1999-03/msg00520.html
87  * 
88  * The flaw in these patches (which went unnoticed at the time) was
89  * that they moved some code that could potentially die() out of the
90  * region protected by the setjmp()s.  This caused exceptions within
91  * END blocks and such to not be handled by the correct setjmp().
92  * 
93  * The original patches that introduces flexible exceptions were:
94  *
95  * http://perl5.git.perl.org/perl.git/commit/312caa8e97f1c7ee342a9895c2f0e749625b4929
96  * http://perl5.git.perl.org/perl.git/commit/14dd3ad8c9bf82cf09798a22cc89a9862dfd6d1a                                        
97  *  
98  */
99
100 #define dJMPENV         JMPENV cur_env
101
102 #define JMPENV_PUSH(v) \
103     STMT_START {                                                        \
104         DEBUG_l({                                                       \
105             int i = 0; JMPENV *p = PL_top_env;                          \
106             while (p) { i++; p = p->je_prev; }                          \
107             Perl_deb(aTHX_ "JUMPENV_PUSH level=%d at %s:%d\n",          \
108                          i,  __FILE__, __LINE__);})                     \
109         cur_env.je_prev = PL_top_env;                                   \
110         OP_REG_TO_MEM;                                                  \
111         cur_env.je_ret = PerlProc_setjmp(cur_env.je_buf, SCOPE_SAVES_SIGNAL_MASK);              \
112         OP_MEM_TO_REG;                                                  \
113         PL_top_env = &cur_env;                                          \
114         cur_env.je_mustcatch = FALSE;                                   \
115         (v) = cur_env.je_ret;                                           \
116     } STMT_END
117
118 #define JMPENV_POP \
119     STMT_START {                                                        \
120         DEBUG_l({                                                       \
121             int i = -1; JMPENV *p = PL_top_env;                         \
122             while (p) { i++; p = p->je_prev; }                          \
123             Perl_deb(aTHX_ "JUMPENV_POP level=%d at %s:%d\n",           \
124                          i, __FILE__, __LINE__);})                      \
125         assert(PL_top_env == &cur_env);                                 \
126         PL_top_env = cur_env.je_prev;                                   \
127     } STMT_END
128
129 #define JMPENV_JUMP(v) \
130     STMT_START {                                                \
131         DEBUG_l({                                               \
132             int i = -1; JMPENV *p = PL_top_env;                 \
133             while (p) { i++; p = p->je_prev; }                  \
134             Perl_deb(aTHX_ "JUMPENV_JUMP(%d) level=%d at %s:%d\n", \
135                          (int)v, i, __FILE__, __LINE__);})      \
136         OP_REG_TO_MEM;                                          \
137         if (PL_top_env->je_prev)                                \
138             PerlProc_longjmp(PL_top_env->je_buf, (v));          \
139         if ((v) == 2)                                           \
140             PerlProc_exit(STATUS_EXIT);                         \
141         PerlIO_printf(PerlIO_stderr(), "panic: top_env, v=%d\n", (int)v); \
142         PerlProc_exit(1);                                       \
143     } STMT_END
144
145 #define CATCH_GET               (PL_top_env->je_mustcatch)
146 #define CATCH_SET(v) \
147     STMT_START {                                                        \
148         DEBUG_l(                                                        \
149             Perl_deb(aTHX_                                              \
150                 "JUMPLEVEL set catch %d => %d (for %p) at %s:%d\n",     \
151                  PL_top_env->je_mustcatch, v, (void*)PL_top_env,        \
152                  __FILE__, __LINE__);)                                  \
153         PL_top_env->je_mustcatch = (v);                                 \
154     } STMT_END
155
156 /*
157 =head1 COP Hint Hashes
158 */
159
160 typedef struct refcounted_he COPHH;
161
162 #define COPHH_KEY_UTF8 REFCOUNTED_HE_KEY_UTF8
163
164 /*
165 =for apidoc Amx|SV *|cophh_fetch_pvn|const COPHH *cophh|const char *keypv|STRLEN keylen|U32 hash|U32 flags
166
167 Look up the entry in the cop hints hash I<cophh> with the key specified by
168 I<keypv> and I<keylen>.  If I<flags> has the C<COPHH_KEY_UTF8> bit set,
169 the key octets are interpreted as UTF-8, otherwise they are interpreted
170 as Latin-1.  I<hash> is a precomputed hash of the key string, or zero if
171 it has not been precomputed.  Returns a mortal scalar copy of the value
172 associated with the key, or C<&PL_sv_placeholder> if there is no value
173 associated with the key.
174
175 =cut
176 */
177
178 #define cophh_fetch_pvn(cophh, keypv, keylen, hash, flags) \
179     Perl_refcounted_he_fetch_pvn(aTHX_ cophh, keypv, keylen, hash, flags)
180
181 /*
182 =for apidoc Amx|SV *|cophh_fetch_pvs|const COPHH *cophh|const char *key|U32 flags
183
184 Like L</cophh_fetch_pvn>, but takes a literal string instead of a
185 string/length pair, and no precomputed hash.
186
187 =cut
188 */
189
190 #define cophh_fetch_pvs(cophh, key, flags) \
191     Perl_refcounted_he_fetch_pvn(aTHX_ cophh, STR_WITH_LEN(key), 0, flags)
192
193 /*
194 =for apidoc Amx|SV *|cophh_fetch_pv|const COPHH *cophh|const char *key|U32 hash|U32 flags
195
196 Like L</cophh_fetch_pvn>, but takes a nul-terminated string instead of
197 a string/length pair.
198
199 =cut
200 */
201
202 #define cophh_fetch_pv(cophh, key, hash, flags) \
203     Perl_refcounted_he_fetch_pv(aTHX_ cophh, key, hash, flags)
204
205 /*
206 =for apidoc Amx|SV *|cophh_fetch_sv|const COPHH *cophh|SV *key|U32 hash|U32 flags
207
208 Like L</cophh_fetch_pvn>, but takes a Perl scalar instead of a
209 string/length pair.
210
211 =cut
212 */
213
214 #define cophh_fetch_sv(cophh, key, hash, flags) \
215     Perl_refcounted_he_fetch_sv(aTHX_ cophh, key, hash, flags)
216
217 /*
218 =for apidoc Amx|HV *|cophh_2hv|const COPHH *cophh|U32 flags
219
220 Generates and returns a standard Perl hash representing the full set of
221 key/value pairs in the cop hints hash I<cophh>.  I<flags> is currently
222 unused and must be zero.
223
224 =cut
225 */
226
227 #define cophh_2hv(cophh, flags) \
228     Perl_refcounted_he_chain_2hv(aTHX_ cophh, flags)
229
230 /*
231 =for apidoc Amx|COPHH *|cophh_copy|COPHH *cophh
232
233 Make and return a complete copy of the cop hints hash I<cophh>.
234
235 =cut
236 */
237
238 #define cophh_copy(cophh) Perl_refcounted_he_inc(aTHX_ cophh)
239
240 /*
241 =for apidoc Amx|void|cophh_free|COPHH *cophh
242
243 Discard the cop hints hash I<cophh>, freeing all resources associated
244 with it.
245
246 =cut
247 */
248
249 #define cophh_free(cophh) Perl_refcounted_he_free(aTHX_ cophh)
250
251 /*
252 =for apidoc Amx|COPHH *|cophh_new_empty
253
254 Generate and return a fresh cop hints hash containing no entries.
255
256 =cut
257 */
258
259 #define cophh_new_empty() ((COPHH *)NULL)
260
261 /*
262 =for apidoc Amx|COPHH *|cophh_store_pvn|COPHH *cophh|const char *keypv|STRLEN keylen|U32 hash|SV *value|U32 flags
263
264 Stores a value, associated with a key, in the cop hints hash I<cophh>,
265 and returns the modified hash.  The returned hash pointer is in general
266 not the same as the hash pointer that was passed in.  The input hash is
267 consumed by the function, and the pointer to it must not be subsequently
268 used.  Use L</cophh_copy> if you need both hashes.
269
270 The key is specified by I<keypv> and I<keylen>.  If I<flags> has the
271 C<COPHH_KEY_UTF8> bit set, the key octets are interpreted as UTF-8,
272 otherwise they are interpreted as Latin-1.  I<hash> is a precomputed
273 hash of the key string, or zero if it has not been precomputed.
274
275 I<value> is the scalar value to store for this key.  I<value> is copied
276 by this function, which thus does not take ownership of any reference
277 to it, and later changes to the scalar will not be reflected in the
278 value visible in the cop hints hash.  Complex types of scalar will not
279 be stored with referential integrity, but will be coerced to strings.
280
281 =cut
282 */
283
284 #define cophh_store_pvn(cophh, keypv, keylen, hash, value, flags) \
285     Perl_refcounted_he_new_pvn(aTHX_ cophh, keypv, keylen, hash, value, flags)
286
287 /*
288 =for apidoc Amx|COPHH *|cophh_store_pvs|const COPHH *cophh|const char *key|SV *value|U32 flags
289
290 Like L</cophh_store_pvn>, but takes a literal string instead of a
291 string/length pair, and no precomputed hash.
292
293 =cut
294 */
295
296 #define cophh_store_pvs(cophh, key, value, flags) \
297     Perl_refcounted_he_new_pvn(aTHX_ cophh, STR_WITH_LEN(key), 0, value, flags)
298
299 /*
300 =for apidoc Amx|COPHH *|cophh_store_pv|const COPHH *cophh|const char *key|U32 hash|SV *value|U32 flags
301
302 Like L</cophh_store_pvn>, but takes a nul-terminated string instead of
303 a string/length pair.
304
305 =cut
306 */
307
308 #define cophh_store_pv(cophh, key, hash, value, flags) \
309     Perl_refcounted_he_new_pv(aTHX_ cophh, key, hash, value, flags)
310
311 /*
312 =for apidoc Amx|COPHH *|cophh_store_sv|const COPHH *cophh|SV *key|U32 hash|SV *value|U32 flags
313
314 Like L</cophh_store_pvn>, but takes a Perl scalar instead of a
315 string/length pair.
316
317 =cut
318 */
319
320 #define cophh_store_sv(cophh, key, hash, value, flags) \
321     Perl_refcounted_he_new_sv(aTHX_ cophh, key, hash, value, flags)
322
323 /*
324 =for apidoc Amx|COPHH *|cophh_delete_pvn|COPHH *cophh|const char *keypv|STRLEN keylen|U32 hash|U32 flags
325
326 Delete a key and its associated value from the cop hints hash I<cophh>,
327 and returns the modified hash.  The returned hash pointer is in general
328 not the same as the hash pointer that was passed in.  The input hash is
329 consumed by the function, and the pointer to it must not be subsequently
330 used.  Use L</cophh_copy> if you need both hashes.
331
332 The key is specified by I<keypv> and I<keylen>.  If I<flags> has the
333 C<COPHH_KEY_UTF8> bit set, the key octets are interpreted as UTF-8,
334 otherwise they are interpreted as Latin-1.  I<hash> is a precomputed
335 hash of the key string, or zero if it has not been precomputed.
336
337 =cut
338 */
339
340 #define cophh_delete_pvn(cophh, keypv, keylen, hash, flags) \
341     Perl_refcounted_he_new_pvn(aTHX_ cophh, keypv, keylen, hash, \
342         (SV *)NULL, flags)
343
344 /*
345 =for apidoc Amx|COPHH *|cophh_delete_pvs|const COPHH *cophh|const char *key|U32 flags
346
347 Like L</cophh_delete_pvn>, but takes a literal string instead of a
348 string/length pair, and no precomputed hash.
349
350 =cut
351 */
352
353 #define cophh_delete_pvs(cophh, key, flags) \
354     Perl_refcounted_he_new_pvn(aTHX_ cophh, STR_WITH_LEN(key), 0, \
355         (SV *)NULL, flags)
356
357 /*
358 =for apidoc Amx|COPHH *|cophh_delete_pv|const COPHH *cophh|const char *key|U32 hash|U32 flags
359
360 Like L</cophh_delete_pvn>, but takes a nul-terminated string instead of
361 a string/length pair.
362
363 =cut
364 */
365
366 #define cophh_delete_pv(cophh, key, hash, flags) \
367     Perl_refcounted_he_new_pv(aTHX_ cophh, key, hash, (SV *)NULL, flags)
368
369 /*
370 =for apidoc Amx|COPHH *|cophh_delete_sv|const COPHH *cophh|SV *key|U32 hash|U32 flags
371
372 Like L</cophh_delete_pvn>, but takes a Perl scalar instead of a
373 string/length pair.
374
375 =cut
376 */
377
378 #define cophh_delete_sv(cophh, key, hash, flags) \
379     Perl_refcounted_he_new_sv(aTHX_ cophh, key, hash, (SV *)NULL, flags)
380
381 #include "mydtrace.h"
382
383 struct cop {
384     BASEOP
385     /* On LP64 putting this here takes advantage of the fact that BASEOP isn't
386        an exact multiple of 8 bytes to save structure padding.  */
387     line_t      cop_line;       /* line # of this command */
388     /* label for this construct is now stored in cop_hints_hash */
389 #ifdef USE_ITHREADS
390     PADOFFSET   cop_stashoff;   /* offset into PL_stashpad, for the
391                                    package the line was compiled in */
392     char *      cop_file;       /* file name the following line # is from */
393 #else
394     HV *        cop_stash;      /* package line was compiled in */
395     GV *        cop_filegv;     /* file the following line # is from */
396 #endif
397     U32         cop_hints;      /* hints bits from pragmata */
398     U32         cop_seq;        /* parse sequence number */
399     /* Beware. mg.c and warnings.pl assume the type of this is STRLEN *:  */
400     STRLEN *    cop_warnings;   /* lexical warnings bitmask */
401     /* compile time state of %^H.  See the comment in op.c for how this is
402        used to recreate a hash to return from caller.  */
403     COPHH *     cop_hints_hash;
404 };
405
406 #ifdef USE_ITHREADS
407 #  define CopFILE(c)            ((c)->cop_file)
408 #  define CopFILEGV(c)          (CopFILE(c) \
409                                  ? gv_fetchfile(CopFILE(c)) : NULL)
410                                  
411 #  ifdef NETWARE
412 #    define CopFILE_set(c,pv)   ((c)->cop_file = savepv(pv))
413 #    define CopFILE_setn(c,pv,l)  ((c)->cop_file = savepv((pv),(l)))
414 #  else
415 #    define CopFILE_set(c,pv)   ((c)->cop_file = savesharedpv(pv))
416 #    define CopFILE_setn(c,pv,l)  ((c)->cop_file = savesharedpvn((pv),(l)))
417 #  endif
418
419 #  define CopFILESV(c)          (CopFILE(c) \
420                                  ? GvSV(gv_fetchfile(CopFILE(c))) : NULL)
421 #  define CopFILEAV(c)          (CopFILE(c) \
422                                  ? GvAV(gv_fetchfile(CopFILE(c))) : NULL)
423 #  define CopFILEAVx(c)         (assert_(CopFILE(c)) \
424                                    GvAV(gv_fetchfile(CopFILE(c))))
425
426 #  define CopSTASH(c)           PL_stashpad[(c)->cop_stashoff]
427 #  define CopSTASH_set(c,hv)    ((c)->cop_stashoff = (hv)               \
428                                     ? alloccopstash(hv)                 \
429                                     : 0)
430 #  ifdef NETWARE
431 #    define CopFILE_free(c) SAVECOPFILE_FREE(c)
432 #  else
433 #    define CopFILE_free(c)     (PerlMemShared_free(CopFILE(c)),(CopFILE(c) = NULL))
434 #  endif
435 #else
436 #  define CopFILEGV(c)          ((c)->cop_filegv)
437 #  define CopFILEGV_set(c,gv)   ((c)->cop_filegv = (GV*)SvREFCNT_inc(gv))
438 #  define CopFILE_set(c,pv)     CopFILEGV_set((c), gv_fetchfile(pv))
439 #  define CopFILE_setn(c,pv,l)  CopFILEGV_set((c), gv_fetchfile_flags((pv),(l),0))
440 #  define CopFILESV(c)          (CopFILEGV(c) ? GvSV(CopFILEGV(c)) : NULL)
441 #  define CopFILEAV(c)          (CopFILEGV(c) ? GvAV(CopFILEGV(c)) : NULL)
442 #  ifdef DEBUGGING
443 #    define CopFILEAVx(c)       (assert(CopFILEGV(c)), GvAV(CopFILEGV(c)))
444 #  else
445 #    define CopFILEAVx(c)       (GvAV(CopFILEGV(c)))
446 # endif
447 #  define CopFILE(c)            (CopFILEGV(c) && GvSV(CopFILEGV(c)) \
448                                     ? SvPVX(GvSV(CopFILEGV(c))) : NULL)
449 #  define CopSTASH(c)           ((c)->cop_stash)
450 #  define CopSTASH_set(c,hv)    ((c)->cop_stash = (hv))
451 #  define CopFILE_free(c)       (SvREFCNT_dec(CopFILEGV(c)),(CopFILEGV(c) = NULL))
452
453 #endif /* USE_ITHREADS */
454
455 #define CopSTASHPV(c)           (CopSTASH(c) ? HvNAME_get(CopSTASH(c)) : NULL)
456    /* cop_stash is not refcounted */
457 #define CopSTASHPV_set(c,pv)    CopSTASH_set((c), gv_stashpv(pv,GV_ADD))
458 #define CopSTASH_eq(c,hv)       (CopSTASH(c) == (hv))
459
460 #define CopHINTHASH_get(c)      ((COPHH*)((c)->cop_hints_hash))
461 #define CopHINTHASH_set(c,h)    ((c)->cop_hints_hash = (h))
462
463 /*
464 =head1 COP Hint Reading
465 */
466
467 /*
468 =for apidoc Am|SV *|cop_hints_fetch_pvn|const COP *cop|const char *keypv|STRLEN keylen|U32 hash|U32 flags
469
470 Look up the hint entry in the cop I<cop> with the key specified by
471 I<keypv> and I<keylen>.  If I<flags> has the C<COPHH_KEY_UTF8> bit set,
472 the key octets are interpreted as UTF-8, otherwise they are interpreted
473 as Latin-1.  I<hash> is a precomputed hash of the key string, or zero if
474 it has not been precomputed.  Returns a mortal scalar copy of the value
475 associated with the key, or C<&PL_sv_placeholder> if there is no value
476 associated with the key.
477
478 =cut
479 */
480
481 #define cop_hints_fetch_pvn(cop, keypv, keylen, hash, flags) \
482     cophh_fetch_pvn(CopHINTHASH_get(cop), keypv, keylen, hash, flags)
483
484 /*
485 =for apidoc Am|SV *|cop_hints_fetch_pvs|const COP *cop|const char *key|U32 flags
486
487 Like L</cop_hints_fetch_pvn>, but takes a literal string instead of a
488 string/length pair, and no precomputed hash.
489
490 =cut
491 */
492
493 #define cop_hints_fetch_pvs(cop, key, flags) \
494     cophh_fetch_pvs(CopHINTHASH_get(cop), key, flags)
495
496 /*
497 =for apidoc Am|SV *|cop_hints_fetch_pv|const COP *cop|const char *key|U32 hash|U32 flags
498
499 Like L</cop_hints_fetch_pvn>, but takes a nul-terminated string instead
500 of a string/length pair.
501
502 =cut
503 */
504
505 #define cop_hints_fetch_pv(cop, key, hash, flags) \
506     cophh_fetch_pv(CopHINTHASH_get(cop), key, hash, flags)
507
508 /*
509 =for apidoc Am|SV *|cop_hints_fetch_sv|const COP *cop|SV *key|U32 hash|U32 flags
510
511 Like L</cop_hints_fetch_pvn>, but takes a Perl scalar instead of a
512 string/length pair.
513
514 =cut
515 */
516
517 #define cop_hints_fetch_sv(cop, key, hash, flags) \
518     cophh_fetch_sv(CopHINTHASH_get(cop), key, hash, flags)
519
520 /*
521 =for apidoc Am|HV *|cop_hints_2hv|const COP *cop|U32 flags
522
523 Generates and returns a standard Perl hash representing the full set of
524 hint entries in the cop I<cop>.  I<flags> is currently unused and must
525 be zero.
526
527 =cut
528 */
529
530 #define cop_hints_2hv(cop, flags) \
531     cophh_2hv(CopHINTHASH_get(cop), flags)
532
533 #define CopLABEL(c)  Perl_cop_fetch_label(aTHX_ (c), NULL, NULL)
534 #define CopLABEL_len(c,len)  Perl_cop_fetch_label(aTHX_ (c), len, NULL)
535 #define CopLABEL_len_flags(c,len,flags)  Perl_cop_fetch_label(aTHX_ (c), len, flags)
536 #define CopLABEL_alloc(pv)      ((pv)?savepv(pv):NULL)
537
538 #define CopSTASH_ne(c,hv)       (!CopSTASH_eq(c,hv))
539 #define CopLINE(c)              ((c)->cop_line)
540 #define CopLINE_inc(c)          (++CopLINE(c))
541 #define CopLINE_dec(c)          (--CopLINE(c))
542 #define CopLINE_set(c,l)        (CopLINE(c) = (l))
543
544 /* OutCopFILE() is CopFILE for output (caller, die, warn, etc.) */
545 #define OutCopFILE(c) CopFILE(c)
546
547 #define CopHINTS_get(c)         ((c)->cop_hints + 0)
548 #define CopHINTS_set(c, h)      STMT_START {                            \
549                                     (c)->cop_hints = (h);               \
550                                 } STMT_END
551
552 /*
553  * Here we have some enormously heavy (or at least ponderous) wizardry.
554  */
555
556 /* subroutine context */
557 struct block_sub {
558     OP *        retop;  /* op to execute on exit from sub */
559     /* Above here is the same for sub, format and eval.  */
560     CV *        cv;
561     /* Above here is the same for sub and format.  */
562     AV *        savearray;
563     AV *        argarray;
564     I32         olddepth;
565     PAD         *oldcomppad;
566 };
567
568
569 /* format context */
570 struct block_format {
571     OP *        retop;  /* op to execute on exit from sub */
572     /* Above here is the same for sub, format and eval.  */
573     CV *        cv;
574     /* Above here is the same for sub and format.  */
575     GV *        gv;
576     GV *        dfoutgv;
577 };
578
579 /* base for the next two macros. Don't use directly.
580  * Note that the refcnt of the cv is incremented twice;  The CX one is
581  * decremented by LEAVESUB, the other by LEAVE. */
582
583 #define PUSHSUB_BASE(cx)                                                \
584         ENTRY_PROBE(GvENAME(CvGV(cv)),                                  \
585                 CopFILE((const COP *)CvSTART(cv)),                      \
586                 CopLINE((const COP *)CvSTART(cv)),                      \
587                 CopSTASHPV((const COP *)CvSTART(cv)));                  \
588                                                                         \
589         cx->blk_sub.cv = cv;                                            \
590         cx->blk_sub.olddepth = CvDEPTH(cv);                             \
591         cx->cx_type |= (hasargs) ? CXp_HASARGS : 0;                     \
592         cx->blk_sub.retop = NULL;                                       \
593         if (!CvDEPTH(cv)) {                                             \
594             SvREFCNT_inc_simple_void_NN(cv);                            \
595             SvREFCNT_inc_simple_void_NN(cv);                            \
596             SAVEFREESV(cv);                                             \
597         }
598
599
600 #define PUSHSUB(cx)                                                     \
601     {                                                                   \
602         /* If the context is indeterminate, then only the lvalue */     \
603         /* flags that the caller also has are applicable.        */     \
604         U8 phlags =                                                     \
605            (PL_op->op_flags & OPf_WANT)                                 \
606                ? OPpENTERSUB_LVAL_MASK                                  \
607                : !(PL_op->op_private & OPpENTERSUB_LVAL_MASK)           \
608                    ? 0 : (U8)Perl_was_lvalue_sub(aTHX);                 \
609         PUSHSUB_BASE(cx)                                                \
610         cx->blk_u16 = PL_op->op_private &                               \
611                           (phlags|OPpDEREF);                            \
612     }
613
614 /* variant for use by OP_DBSTATE, where op_private holds hint bits */
615 #define PUSHSUB_DB(cx)                                                  \
616         PUSHSUB_BASE(cx)                                                \
617         cx->blk_u16 = 0;
618
619
620 #define PUSHFORMAT(cx, retop)                                           \
621         cx->blk_format.cv = cv;                                         \
622         cx->blk_format.gv = gv;                                         \
623         cx->blk_format.retop = (retop);                                 \
624         cx->blk_format.dfoutgv = PL_defoutgv;                           \
625         if (!CvDEPTH(cv)) SvREFCNT_inc_simple_void_NN(cv);              \
626         CvDEPTH(cv)++;                                                  \
627         SvREFCNT_inc_void(cx->blk_format.dfoutgv)
628
629 #define POP_SAVEARRAY()                                         \
630     STMT_START {                                                        \
631         SvREFCNT_dec(GvAV(PL_defgv));                                   \
632         GvAV(PL_defgv) = cx->blk_sub.savearray;                         \
633     } STMT_END
634
635 /* junk in @_ spells trouble when cloning CVs and in pp_caller(), so don't
636  * leave any (a fast av_clear(ary), basically) */
637 #define CLEAR_ARGARRAY(ary) \
638     STMT_START {                                                        \
639         AvMAX(ary) += AvARRAY(ary) - AvALLOC(ary);                      \
640         AvARRAY(ary) = AvALLOC(ary);                                    \
641         AvFILLp(ary) = -1;                                              \
642     } STMT_END
643
644 #define POPSUB(cx,sv)                                                   \
645     STMT_START {                                                        \
646         RETURN_PROBE(GvENAME(CvGV((const CV*)cx->blk_sub.cv)),          \
647                 CopFILE((COP*)CvSTART((const CV*)cx->blk_sub.cv)),      \
648                 CopLINE((COP*)CvSTART((const CV*)cx->blk_sub.cv)),      \
649                 CopSTASHPV((COP*)CvSTART((const CV*)cx->blk_sub.cv)));  \
650                                                                         \
651         if (CxHASARGS(cx)) {                                            \
652             POP_SAVEARRAY();                                            \
653             /* abandon @_ if it got reified */                          \
654             if (AvREAL(cx->blk_sub.argarray)) {                         \
655                 const SSize_t fill = AvFILLp(cx->blk_sub.argarray);     \
656                 SvREFCNT_dec_NN(cx->blk_sub.argarray);                  \
657                 cx->blk_sub.argarray = newAV();                         \
658                 av_extend(cx->blk_sub.argarray, fill);                  \
659                 AvREIFY_only(cx->blk_sub.argarray);                     \
660                 CX_CURPAD_SV(cx->blk_sub, 0) = MUTABLE_SV(cx->blk_sub.argarray); \
661             }                                                           \
662             else {                                                      \
663                 CLEAR_ARGARRAY(cx->blk_sub.argarray);                   \
664             }                                                           \
665         }                                                               \
666         sv = MUTABLE_SV(cx->blk_sub.cv);                                \
667         if (sv && (CvDEPTH((const CV*)sv) = cx->blk_sub.olddepth))      \
668             sv = NULL;                                          \
669     } STMT_END
670
671 #define LEAVESUB(sv)                                                    \
672     STMT_START {                                                        \
673         SvREFCNT_dec(sv);                                               \
674     } STMT_END
675
676 #define POPFORMAT(cx)                                                   \
677         setdefout(cx->blk_format.dfoutgv);                              \
678         CvDEPTH(cx->blk_format.cv)--;                                   \
679         if (!CvDEPTH(cx->blk_format.cv))                                \
680             SvREFCNT_dec_NN(cx->blk_format.cv);                         \
681         SvREFCNT_dec_NN(cx->blk_format.dfoutgv);
682
683 /* eval context */
684 struct block_eval {
685     OP *        retop;  /* op to execute on exit from eval */
686     /* Above here is the same for sub, format and eval.  */
687     SV *        old_namesv;
688     OP *        old_eval_root;
689     SV *        cur_text;
690     CV *        cv;
691     JMPENV *    cur_top_env; /* value of PL_top_env when eval CX created */
692 };
693
694 /* If we ever need more than 512 op types, change the shift from 7.
695    blku_gimme is actually also only 2 bits, so could be merged with something.
696 */
697
698 #define CxOLD_IN_EVAL(cx)       (((cx)->blk_u16) & 0x7F)
699 #define CxOLD_OP_TYPE(cx)       (((cx)->blk_u16) >> 7)
700
701 #define PUSHEVAL(cx,n)                                                  \
702     STMT_START {                                                        \
703         assert(!(PL_in_eval & ~0x7F));                                  \
704         assert(!(PL_op->op_type & ~0x1FF));                             \
705         cx->blk_u16 = (PL_in_eval & 0x7F) | ((U16)PL_op->op_type << 7); \
706         cx->blk_eval.old_namesv = (n ? newSVpv(n,0) : NULL);            \
707         cx->blk_eval.old_eval_root = PL_eval_root;                      \
708         cx->blk_eval.cur_text = PL_parser ? PL_parser->linestr : NULL;  \
709         cx->blk_eval.cv = NULL; /* set by doeval(), as applicable */    \
710         cx->blk_eval.retop = NULL;                                      \
711         cx->blk_eval.cur_top_env = PL_top_env;                          \
712     } STMT_END
713
714 #define POPEVAL(cx)                                                     \
715     STMT_START {                                                        \
716         PL_in_eval = CxOLD_IN_EVAL(cx);                                 \
717         optype = CxOLD_OP_TYPE(cx);                                     \
718         PL_eval_root = cx->blk_eval.old_eval_root;                      \
719         if (cx->blk_eval.cur_text && SvSCREAM(cx->blk_eval.cur_text))   \
720             SvREFCNT_dec_NN(cx->blk_eval.cur_text);                     \
721         if (cx->blk_eval.old_namesv)                                    \
722             sv_2mortal(cx->blk_eval.old_namesv);                        \
723     } STMT_END
724
725 /* loop context */
726 struct block_loop {
727     I32         resetsp;
728     LOOP *      my_op;  /* My op, that contains redo, next and last ops.  */
729     union {     /* different ways of locating the iteration variable */
730         SV      **svp;
731         GV      *gv;
732         PAD     *oldcomppad; /* only used in ITHREADS */
733     } itervar_u;
734     union {
735         struct { /* valid if type is LOOP_FOR or LOOP_PLAIN (but {NULL,0})*/
736             AV * ary; /* use the stack if this is NULL */
737             IV ix;
738         } ary;
739         struct { /* valid if type is LOOP_LAZYIV */
740             IV cur;
741             IV end;
742         } lazyiv;
743         struct { /* valid if type if LOOP_LAZYSV */
744             SV * cur;
745             SV * end; /* maxiumum value (or minimum in reverse) */
746         } lazysv;
747     } state_u;
748 };
749
750 #ifdef USE_ITHREADS
751 #  define CxITERVAR_PADSV(c) \
752         &CX_CURPAD_SV( (c)->blk_loop.itervar_u, (c)->blk_loop.my_op->op_targ)
753 #else
754 #  define CxITERVAR_PADSV(c) ((c)->blk_loop.itervar_u.svp)
755 #endif
756
757 #define CxITERVAR(c)                                                    \
758         ((c)->blk_loop.itervar_u.oldcomppad                             \
759          ? (CxPADLOOP(c)                                                \
760             ? CxITERVAR_PADSV(c)                                        \
761             : &GvSV((c)->blk_loop.itervar_u.gv))                        \
762          : (SV**)NULL)
763
764 #define CxLABEL(c)      (0 + CopLABEL((c)->blk_oldcop))
765 #define CxLABEL_len(c,len)      (0 + CopLABEL_len((c)->blk_oldcop, len))
766 #define CxLABEL_len_flags(c,len,flags)  (0 + CopLABEL_len_flags((c)->blk_oldcop, len, flags))
767 #define CxHASARGS(c)    (((c)->cx_type & CXp_HASARGS) == CXp_HASARGS)
768 #define CxLVAL(c)       (0 + (c)->blk_u16)
769
770 #define PUSHLOOP_PLAIN(cx, s)                                           \
771         cx->blk_loop.resetsp = s - PL_stack_base;                       \
772         cx->blk_loop.my_op = cLOOP;                                     \
773         cx->blk_loop.state_u.ary.ary = NULL;                            \
774         cx->blk_loop.state_u.ary.ix = 0;                                \
775         cx->blk_loop.itervar_u.svp = NULL;
776
777 #define PUSHLOOP_FOR(cx, ivar, s)                                       \
778         cx->blk_loop.resetsp = s - PL_stack_base;                       \
779         cx->blk_loop.my_op = cLOOP;                                     \
780         cx->blk_loop.state_u.ary.ary = NULL;                            \
781         cx->blk_loop.state_u.ary.ix = 0;                                \
782         cx->blk_loop.itervar_u.svp = (SV**)(ivar);
783
784 #define POPLOOP(cx)                                                     \
785         if (CxTYPE(cx) == CXt_LOOP_LAZYSV) {                            \
786             SvREFCNT_dec_NN(cx->blk_loop.state_u.lazysv.cur);           \
787             SvREFCNT_dec_NN(cx->blk_loop.state_u.lazysv.end);           \
788         }                                                               \
789         if (CxTYPE(cx) == CXt_LOOP_FOR)                                 \
790             SvREFCNT_dec(cx->blk_loop.state_u.ary.ary);
791
792 /* given/when context */
793 struct block_givwhen {
794         OP *leave_op;
795 };
796
797 #define PUSHGIVEN(cx)                                                   \
798         cx->blk_givwhen.leave_op = cLOGOP->op_other;
799
800 #define PUSHWHEN PUSHGIVEN
801
802 /* context common to subroutines, evals and loops */
803 struct block {
804     U8          blku_type;      /* what kind of context this is */
805     U8          blku_gimme;     /* is this block running in list context? */
806     U16         blku_u16;       /* used by block_sub and block_eval (so far) */
807     I32         blku_oldsp;     /* stack pointer to copy stuff down to */
808     COP *       blku_oldcop;    /* old curcop pointer */
809     I32         blku_oldmarksp; /* mark stack index */
810     I32         blku_oldscopesp;        /* scope stack index */
811     PMOP *      blku_oldpm;     /* values of pattern match vars */
812
813     union {
814         struct block_sub        blku_sub;
815         struct block_format     blku_format;
816         struct block_eval       blku_eval;
817         struct block_loop       blku_loop;
818         struct block_givwhen    blku_givwhen;
819     } blk_u;
820 };
821 #define blk_oldsp       cx_u.cx_blk.blku_oldsp
822 #define blk_oldcop      cx_u.cx_blk.blku_oldcop
823 #define blk_oldmarksp   cx_u.cx_blk.blku_oldmarksp
824 #define blk_oldscopesp  cx_u.cx_blk.blku_oldscopesp
825 #define blk_oldpm       cx_u.cx_blk.blku_oldpm
826 #define blk_gimme       cx_u.cx_blk.blku_gimme
827 #define blk_u16         cx_u.cx_blk.blku_u16
828 #define blk_sub         cx_u.cx_blk.blk_u.blku_sub
829 #define blk_format      cx_u.cx_blk.blk_u.blku_format
830 #define blk_eval        cx_u.cx_blk.blk_u.blku_eval
831 #define blk_loop        cx_u.cx_blk.blk_u.blku_loop
832 #define blk_givwhen     cx_u.cx_blk.blk_u.blku_givwhen
833
834 #define DEBUG_CX(action)                                                \
835     DEBUG_l(                                                            \
836         Perl_deb(aTHX_ "CX %ld %s %s (scope %ld,%ld) at %s:%d\n",       \
837                     (long)cxstack_ix,                                   \
838                     action,                                             \
839                     PL_block_type[CxTYPE(&cxstack[cxstack_ix])],        \
840                     (long)PL_scopestack_ix,                             \
841                     (long)(cxstack[cxstack_ix].blk_oldscopesp),         \
842                     __FILE__, __LINE__));
843
844 /* Enter a block. */
845 #define PUSHBLOCK(cx,t,sp) CXINC, cx = &cxstack[cxstack_ix],            \
846         cx->cx_type             = t,                                    \
847         cx->blk_oldsp           = sp - PL_stack_base,                   \
848         cx->blk_oldcop          = PL_curcop,                            \
849         cx->blk_oldmarksp       = PL_markstack_ptr - PL_markstack,      \
850         cx->blk_oldscopesp      = PL_scopestack_ix,                     \
851         cx->blk_oldpm           = PL_curpm,                             \
852         cx->blk_gimme           = (U8)gimme;                            \
853         DEBUG_CX("PUSH");
854
855 /* Exit a block (RETURN and LAST). */
856 #define POPBLOCK(cx,pm)                                                 \
857         DEBUG_CX("POP");                                                \
858         cx = &cxstack[cxstack_ix--],                                    \
859         newsp            = PL_stack_base + cx->blk_oldsp,               \
860         PL_curcop        = cx->blk_oldcop,                              \
861         PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp,            \
862         PL_scopestack_ix = cx->blk_oldscopesp,                          \
863         pm               = cx->blk_oldpm,                               \
864         gimme            = cx->blk_gimme;
865
866 /* Continue a block elsewhere (NEXT and REDO). */
867 #define TOPBLOCK(cx)                                                    \
868         DEBUG_CX("TOP");                                                \
869         cx  = &cxstack[cxstack_ix],                                     \
870         PL_stack_sp      = PL_stack_base + cx->blk_oldsp,               \
871         PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp,            \
872         PL_scopestack_ix = cx->blk_oldscopesp,                          \
873         PL_curpm         = cx->blk_oldpm;
874
875 /* substitution context */
876 struct subst {
877     U8          sbu_type;       /* what kind of context this is */
878     U8          sbu_rflags;
879     U16         sbu_rxtainted;  /* matches struct block */
880     I32         sbu_iters;
881     I32         sbu_maxiters;
882     I32         sbu_oldsave;
883     char *      sbu_orig;
884     SV *        sbu_dstr;
885     SV *        sbu_targ;
886     char *      sbu_s;
887     char *      sbu_m;
888     char *      sbu_strend;
889     void *      sbu_rxres;
890     REGEXP *    sbu_rx;
891 };
892 #define sb_iters        cx_u.cx_subst.sbu_iters
893 #define sb_maxiters     cx_u.cx_subst.sbu_maxiters
894 #define sb_rflags       cx_u.cx_subst.sbu_rflags
895 #define sb_oldsave      cx_u.cx_subst.sbu_oldsave
896 #define sb_rxtainted    cx_u.cx_subst.sbu_rxtainted
897 #define sb_orig         cx_u.cx_subst.sbu_orig
898 #define sb_dstr         cx_u.cx_subst.sbu_dstr
899 #define sb_targ         cx_u.cx_subst.sbu_targ
900 #define sb_s            cx_u.cx_subst.sbu_s
901 #define sb_m            cx_u.cx_subst.sbu_m
902 #define sb_strend       cx_u.cx_subst.sbu_strend
903 #define sb_rxres        cx_u.cx_subst.sbu_rxres
904 #define sb_rx           cx_u.cx_subst.sbu_rx
905
906 #ifdef PERL_CORE
907 #  define PUSHSUBST(cx) CXINC, cx = &cxstack[cxstack_ix],               \
908         cx->sb_iters            = iters,                                \
909         cx->sb_maxiters         = maxiters,                             \
910         cx->sb_rflags           = r_flags,                              \
911         cx->sb_oldsave          = oldsave,                              \
912         cx->sb_rxtainted        = rxtainted,                            \
913         cx->sb_orig             = orig,                                 \
914         cx->sb_dstr             = dstr,                                 \
915         cx->sb_targ             = targ,                                 \
916         cx->sb_s                = s,                                    \
917         cx->sb_m                = m,                                    \
918         cx->sb_strend           = strend,                               \
919         cx->sb_rxres            = NULL,                                 \
920         cx->sb_rx               = rx,                                   \
921         cx->cx_type             = CXt_SUBST | (once ? CXp_ONCE : 0);    \
922         rxres_save(&cx->sb_rxres, rx);                                  \
923         (void)ReREFCNT_inc(rx)
924
925 #  define POPSUBST(cx) cx = &cxstack[cxstack_ix--];                     \
926         rxres_free(&cx->sb_rxres);                                      \
927         ReREFCNT_dec(cx->sb_rx)
928 #endif
929
930 #define CxONCE(cx)              ((cx)->cx_type & CXp_ONCE)
931
932 struct context {
933     union {
934         struct block    cx_blk;
935         struct subst    cx_subst;
936     } cx_u;
937 };
938 #define cx_type cx_u.cx_subst.sbu_type
939
940 /* If you re-order these, there is also an array of uppercase names in perl.h
941    and a static array of context names in pp_ctl.c  */
942 #define CXTYPEMASK      0xf
943 #define CXt_NULL        0
944 #define CXt_WHEN        1
945 #define CXt_BLOCK       2
946 /* When micro-optimising :-) keep GIVEN next to the LOOPs, as these 5 share a
947    jump table in pp_ctl.c
948    The first 4 don't have a 'case' in at least one switch statement in pp_ctl.c
949 */
950 #define CXt_GIVEN       3
951 /* This is first so that CXt_LOOP_FOR|CXt_LOOP_LAZYIV is CXt_LOOP_LAZYIV */
952 #define CXt_LOOP_FOR    4
953 #define CXt_LOOP_PLAIN  5
954 #define CXt_LOOP_LAZYSV 6
955 #define CXt_LOOP_LAZYIV 7
956 #define CXt_SUB         8
957 #define CXt_FORMAT      9
958 #define CXt_EVAL       10
959 #define CXt_SUBST      11
960 /* SUBST doesn't feature in all switch statements.  */
961
962 /* private flags for CXt_SUB and CXt_NULL
963    However, this is checked in many places which do not check the type, so
964    this bit needs to be kept clear for most everything else. For reasons I
965    haven't investigated, it can coexist with CXp_FOR_DEF */
966 #define CXp_MULTICALL   0x10    /* part of a multicall (so don't
967                                    tear down context on exit). */ 
968
969 /* private flags for CXt_SUB and CXt_FORMAT */
970 #define CXp_HASARGS     0x20
971
972 /* private flags for CXt_EVAL */
973 #define CXp_REAL        0x20    /* truly eval'', not a lookalike */
974 #define CXp_TRYBLOCK    0x40    /* eval{}, not eval'' or similar */
975
976 /* private flags for CXt_LOOP */
977 #define CXp_FOR_DEF     0x10    /* foreach using $_ */
978 #define CxPADLOOP(c)    ((c)->blk_loop.my_op->op_targ)
979
980 /* private flags for CXt_SUBST */
981 #define CXp_ONCE        0x10    /* What was sbu_once in struct subst */
982
983 #define CxTYPE(c)       ((c)->cx_type & CXTYPEMASK)
984 #define CxTYPE_is_LOOP(c)       (((c)->cx_type & 0xC) == 0x4)
985 #define CxMULTICALL(c)  (((c)->cx_type & CXp_MULTICALL)                 \
986                          == CXp_MULTICALL)
987 #define CxREALEVAL(c)   (((c)->cx_type & (CXTYPEMASK|CXp_REAL))         \
988                          == (CXt_EVAL|CXp_REAL))
989 #define CxTRYBLOCK(c)   (((c)->cx_type & (CXTYPEMASK|CXp_TRYBLOCK))     \
990                          == (CXt_EVAL|CXp_TRYBLOCK))
991 #define CxFOREACH(c)    (CxTYPE_is_LOOP(c) && CxTYPE(c) != CXt_LOOP_PLAIN)
992 #define CxFOREACHDEF(c) ((CxTYPE_is_LOOP(c) && CxTYPE(c) != CXt_LOOP_PLAIN) \
993                          && ((c)->cx_type & CXp_FOR_DEF))
994
995 #define CXINC (cxstack_ix < cxstack_max ? ++cxstack_ix : (cxstack_ix = cxinc()))
996
997 /* 
998 =head1 "Gimme" Values
999 */
1000
1001 /*
1002 =for apidoc AmU||G_SCALAR
1003 Used to indicate scalar context.  See C<GIMME_V>, C<GIMME>, and
1004 L<perlcall>.
1005
1006 =for apidoc AmU||G_ARRAY
1007 Used to indicate list context.  See C<GIMME_V>, C<GIMME> and
1008 L<perlcall>.
1009
1010 =for apidoc AmU||G_VOID
1011 Used to indicate void context.  See C<GIMME_V> and L<perlcall>.
1012
1013 =for apidoc AmU||G_DISCARD
1014 Indicates that arguments returned from a callback should be discarded.  See
1015 L<perlcall>.
1016
1017 =for apidoc AmU||G_EVAL
1018
1019 Used to force a Perl C<eval> wrapper around a callback.  See
1020 L<perlcall>.
1021
1022 =for apidoc AmU||G_NOARGS
1023
1024 Indicates that no arguments are being sent to a callback.  See
1025 L<perlcall>.
1026
1027 =cut
1028 */
1029
1030 #define G_SCALAR        2
1031 #define G_ARRAY         3
1032 #define G_VOID          1
1033 #define G_WANT          3
1034
1035 /* extra flags for Perl_call_* routines */
1036 #define G_DISCARD       4       /* Call FREETMPS.
1037                                    Don't change this without consulting the
1038                                    hash actions codes defined in hv.h */
1039 #define G_EVAL          8       /* Assume eval {} around subroutine call. */
1040 #define G_NOARGS       16       /* Don't construct a @_ array. */
1041 #define G_KEEPERR      32       /* Warn for errors, don't overwrite $@ */
1042 #define G_NODEBUG      64       /* Disable debugging at toplevel.  */
1043 #define G_METHOD      128       /* Calling method. */
1044 #define G_FAKINGEVAL  256       /* Faking an eval context for call_sv or
1045                                    fold_constants. */
1046 #define G_UNDEF_FILL  512       /* Fill the stack with &PL_sv_undef
1047                                    A special case for UNSHIFT in
1048                                    Perl_magic_methcall().  */
1049 #define G_WRITING_TO_STDERR 1024 /* Perl_write_to_stderr() is calling
1050                                     Perl_magic_methcall().  */
1051
1052 /* flag bits for PL_in_eval */
1053 #define EVAL_NULL       0       /* not in an eval */
1054 #define EVAL_INEVAL     1       /* some enclosing scope is an eval */
1055 #define EVAL_WARNONLY   2       /* used by yywarn() when calling yyerror() */
1056 #define EVAL_KEEPERR    4       /* set by Perl_call_sv if G_KEEPERR */
1057 #define EVAL_INREQUIRE  8       /* The code is being required. */
1058
1059 /* Support for switching (stack and block) contexts.
1060  * This ensures magic doesn't invalidate local stack and cx pointers.
1061  */
1062
1063 #define PERLSI_UNKNOWN          -1
1064 #define PERLSI_UNDEF            0
1065 #define PERLSI_MAIN             1
1066 #define PERLSI_MAGIC            2
1067 #define PERLSI_SORT             3
1068 #define PERLSI_SIGNAL           4
1069 #define PERLSI_OVERLOAD         5
1070 #define PERLSI_DESTROY          6
1071 #define PERLSI_WARNHOOK         7
1072 #define PERLSI_DIEHOOK          8
1073 #define PERLSI_REQUIRE          9
1074
1075 struct stackinfo {
1076     AV *                si_stack;       /* stack for current runlevel */
1077     PERL_CONTEXT *      si_cxstack;     /* context stack for runlevel */
1078     struct stackinfo *  si_prev;
1079     struct stackinfo *  si_next;
1080     I32                 si_cxix;        /* current context index */
1081     I32                 si_cxmax;       /* maximum allocated index */
1082     I32                 si_type;        /* type of runlevel */
1083     I32                 si_markoff;     /* offset where markstack begins for us.
1084                                          * currently used only with DEBUGGING,
1085                                          * but not #ifdef-ed for bincompat */
1086 };
1087
1088 typedef struct stackinfo PERL_SI;
1089
1090 #define cxstack         (PL_curstackinfo->si_cxstack)
1091 #define cxstack_ix      (PL_curstackinfo->si_cxix)
1092 #define cxstack_max     (PL_curstackinfo->si_cxmax)
1093
1094 #ifdef DEBUGGING
1095 #  define       SET_MARK_OFFSET \
1096     PL_curstackinfo->si_markoff = PL_markstack_ptr - PL_markstack
1097 #else
1098 #  define       SET_MARK_OFFSET NOOP
1099 #endif
1100
1101 #define PUSHSTACKi(type) \
1102     STMT_START {                                                        \
1103         PERL_SI *next = PL_curstackinfo->si_next;                       \
1104         DEBUG_l({                                                       \
1105             int i = 0; PERL_SI *p = PL_curstackinfo;                    \
1106             while (p) { i++; p = p->si_prev; }                          \
1107             Perl_deb(aTHX_ "push STACKINFO %d at %s:%d\n",              \
1108                          i, __FILE__, __LINE__);})                      \
1109         if (!next) {                                                    \
1110             next = new_stackinfo(32, 2048/sizeof(PERL_CONTEXT) - 1);    \
1111             next->si_prev = PL_curstackinfo;                            \
1112             PL_curstackinfo->si_next = next;                            \
1113         }                                                               \
1114         next->si_type = type;                                           \
1115         next->si_cxix = -1;                                             \
1116         AvFILLp(next->si_stack) = 0;                                    \
1117         SWITCHSTACK(PL_curstack,next->si_stack);                        \
1118         PL_curstackinfo = next;                                         \
1119         SET_MARK_OFFSET;                                                \
1120     } STMT_END
1121
1122 #define PUSHSTACK PUSHSTACKi(PERLSI_UNKNOWN)
1123
1124 /* POPSTACK works with PL_stack_sp, so it may need to be bracketed by
1125  * PUTBACK/SPAGAIN to flush/refresh any local SP that may be active */
1126 #define POPSTACK \
1127     STMT_START {                                                        \
1128         dSP;                                                            \
1129         PERL_SI * const prev = PL_curstackinfo->si_prev;                \
1130         DEBUG_l({                                                       \
1131             int i = -1; PERL_SI *p = PL_curstackinfo;                   \
1132             while (p) { i++; p = p->si_prev; }                          \
1133             Perl_deb(aTHX_ "pop  STACKINFO %d at %s:%d\n",              \
1134                          i, __FILE__, __LINE__);})                      \
1135         if (!prev) {                                                    \
1136             Perl_croak_popstack();                                      \
1137         }                                                               \
1138         SWITCHSTACK(PL_curstack,prev->si_stack);                        \
1139         /* don't free prev here, free them all at the END{} */          \
1140         PL_curstackinfo = prev;                                         \
1141     } STMT_END
1142
1143 #define POPSTACK_TO(s) \
1144     STMT_START {                                                        \
1145         while (PL_curstack != s) {                                      \
1146             dounwind(-1);                                               \
1147             POPSTACK;                                                   \
1148         }                                                               \
1149     } STMT_END
1150
1151 #define IN_PERL_COMPILETIME     (PL_curcop == &PL_compiling)
1152 #define IN_PERL_RUNTIME         (PL_curcop != &PL_compiling)
1153
1154 /*
1155 =head1 Multicall Functions
1156
1157 =for apidoc Ams||dMULTICALL
1158 Declare local variables for a multicall. See L<perlcall/LIGHTWEIGHT CALLBACKS>.
1159
1160 =for apidoc Ams||PUSH_MULTICALL
1161 Opening bracket for a lightweight callback.
1162 See L<perlcall/LIGHTWEIGHT CALLBACKS>.
1163
1164 =for apidoc Ams||MULTICALL
1165 Make a lightweight callback. See L<perlcall/LIGHTWEIGHT CALLBACKS>.
1166
1167 =for apidoc Ams||POP_MULTICALL
1168 Closing bracket for a lightweight callback.
1169 See L<perlcall/LIGHTWEIGHT CALLBACKS>.
1170
1171 =cut
1172 */
1173
1174 #define dMULTICALL \
1175     SV **newsp;                 /* set by POPBLOCK */                   \
1176     PERL_CONTEXT *cx;                                                   \
1177     CV *multicall_cv;                                                   \
1178     OP *multicall_cop;                                                  \
1179     bool multicall_oldcatch;                                            \
1180     U8 hasargs = 0              /* used by PUSHSUB */
1181
1182 #define PUSH_MULTICALL(the_cv) \
1183     PUSH_MULTICALL_WITHDEPTH(the_cv, 1);
1184
1185 /* Like PUSH_MULTICALL, but allows you to specify the CvDEPTH increment,
1186  * rather than the default of 1 (this isn't part of the public API) */
1187
1188 #define PUSH_MULTICALL_WITHDEPTH(the_cv, depth) \
1189     STMT_START {                                                        \
1190         CV * const _nOnclAshIngNamE_ = the_cv;                          \
1191         CV * const cv = _nOnclAshIngNamE_;                              \
1192         PADLIST * const padlist = CvPADLIST(cv);                        \
1193         ENTER;                                                          \
1194         multicall_oldcatch = CATCH_GET;                                 \
1195         SAVETMPS; SAVEVPTR(PL_op);                                      \
1196         CATCH_SET(TRUE);                                                \
1197         PUSHSTACKi(PERLSI_SORT);                                        \
1198         PUSHBLOCK(cx, CXt_SUB|CXp_MULTICALL, PL_stack_sp);              \
1199         PUSHSUB(cx);                                                    \
1200         CvDEPTH(cv) += depth;                                           \
1201         if (CvDEPTH(cv) >= 2) {                                         \
1202             PERL_STACK_OVERFLOW_CHECK();                                \
1203             Perl_pad_push(aTHX_ padlist, CvDEPTH(cv));                  \
1204         }                                                               \
1205         SAVECOMPPAD();                                                  \
1206         PAD_SET_CUR_NOSAVE(padlist, CvDEPTH(cv));                       \
1207         multicall_cv = cv;                                              \
1208         multicall_cop = CvSTART(cv);                                    \
1209     } STMT_END
1210
1211 #define MULTICALL \
1212     STMT_START {                                                        \
1213         PL_op = multicall_cop;                                          \
1214         CALLRUNOPS(aTHX);                                               \
1215     } STMT_END
1216
1217 #define POP_MULTICALL \
1218     STMT_START {                                                        \
1219         cx = &cxstack[cxstack_ix];                                      \
1220         if (! ((CvDEPTH(multicall_cv) = cx->blk_sub.olddepth)) ) {      \
1221                 LEAVESUB(multicall_cv);                                 \
1222         }                                                               \
1223         POPBLOCK(cx,PL_curpm);                                          \
1224         POPSTACK;                                                       \
1225         CATCH_SET(multicall_oldcatch);                                  \
1226         LEAVE;                                                          \
1227         SPAGAIN;                                                        \
1228     } STMT_END
1229
1230 /* Change the CV of an already-pushed MULTICALL CxSUB block.
1231  * (this isn't part of the public API) */
1232
1233 #define CHANGE_MULTICALL_WITHDEPTH(the_cv, depth) \
1234     STMT_START {                                                        \
1235         CV * const _nOnclAshIngNamE_ = the_cv;                          \
1236         CV * const cv = _nOnclAshIngNamE_;                              \
1237         PADLIST * const padlist = CvPADLIST(cv);                        \
1238         cx = &cxstack[cxstack_ix];                                      \
1239         assert(cx->cx_type & CXp_MULTICALL);                            \
1240         if (! ((CvDEPTH(multicall_cv) = cx->blk_sub.olddepth)) ) {      \
1241                 LEAVESUB(multicall_cv);                                 \
1242         }                                                               \
1243         cx->cx_type &= ~CXp_HASARGS;                                    \
1244         PUSHSUB(cx);                                                    \
1245         CvDEPTH(cv) += depth;                                           \
1246         if (CvDEPTH(cv) >= 2) {                                         \
1247             PERL_STACK_OVERFLOW_CHECK();                                \
1248             Perl_pad_push(aTHX_ padlist, CvDEPTH(cv));                  \
1249         }                                                               \
1250         SAVECOMPPAD();                                                  \
1251         PAD_SET_CUR_NOSAVE(padlist, CvDEPTH(cv));                       \
1252         multicall_cv = cv;                                              \
1253         multicall_cop = CvSTART(cv);                                    \
1254     } STMT_END
1255 /*
1256  * Local variables:
1257  * c-indentation-style: bsd
1258  * c-basic-offset: 4
1259  * indent-tabs-mode: nil
1260  * End:
1261  *
1262  * ex: set ts=8 sts=4 sw=4 et:
1263  */