Fwd: CPAN Upload: Y/YV/YVES/ExtUtils-Install-1.45.tar.gz
[perl.git] / NetWare / Makefile
1 ##
2 ## Makefile to build Perl on NetWare using Microsoft NMAKE and CodeWarrior tools
3 ##
4 ## This will build perl.nlm, perl.lib and extensions called NLMs
5 ##
6
7 ##
8 ## Please read README.netware before starting
9 ##
10
11 ##
12 ## Build configuration.  Edit the values below to suit your needs.
13 ##
14
15 ## This file is created by using the makefile that creates Windows Perl as the reference
16 ## Author:
17 ## Date Created: 13th July 2000
18 ## Date Modified: 21st March 2002
19 # Name of the NLM
20
21
22 NLM_NAME                = perl.nlm
23 NLM_NAME8               = Perl
24
25 MAKE_ACTION             = Build
26
27 # Flags
28 DBG_FLAG        = -DDEBUGON
29
30 NW_FLAGS        = -DNETWARE -DNLM_PLATFORM -DNETDB_USE_INTERNET
31
32 REL_DIR = Release
33 DEB_DIR = Debug
34
35
36 !ifndef NLMSDKBASE
37 !message "Run bat\SetNWBld.bat to set the NetWare SDK before continuing.\n"
38 !error
39 !endif                                                                                  # !ifndef NLMSDKBASE
40
41 !ifndef CODEWAR                                                                 # !ifdef CODEWAR
42 !message "CodeWarrior tools base directory is not defined. Run bat\setnwbld.bat before proceeding"
43 !error
44 !endif                                                                                  # !ifdef CODEWAR
45
46 !ifndef MAKE_TYPE
47 !message "Run bat\buildtype.bat to set the build type before continuing.\n"
48 !error
49 !endif                                                                                  # !ifndef MAKE_TYPE
50
51 !ifdef USE_MPK
52 MPKFLAGS        = -DMPK_ON -DIAPX386
53 MPKMESSAGE = MPK Build...
54 XDCTOOL = mpkxdc
55 !ifndef MPKBASE
56 !message "Run bat\setmpksdk.bat to set the NetWare MPK SDK before continuing.\n"
57 !error
58 !endif                                                                                  # !ifndef MPKBASE
59 NLM_INCLUDE_MP          = -I$(MPKBASE)\include
60 MPKTOOL = $(MPKBASE)\$(XDCTOOL)
61 !else                                                                                   # !ifdef USE_MPK
62 MPKMESSAGE = Non MPK Build...
63 NLM_INCLUDE_MP =
64 MPKTOOL = 
65 !endif                                                                                  # !ifdef USE_MPK
66
67 #!ifndef SECURITYBASE
68 #!message "Run bat\SetSecSdk.bat to set the Security path before continuing.\n"
69 #!error
70 #!endif                                                                                 # !ifndef SECURITYBASE
71
72 #!ifndef UCSINC
73 #!message "Run bat\BldNWExt.bat to set the UCS Include path before continuing.\n"
74 #!error
75 #!endif                                                                                 # !ifndef UCSINC
76
77 NLMIMPORTS                      = $(NLMSDKBASE)\imports
78
79 !ifdef SECURITYBASE
80 SECURITY_IMPORTS        = $(SECURITYBASE)\imports
81 !endif                                                                                  # !ifdef SECURITYBASE
82
83 !ifndef NLM_VERSION
84 NLM_VERSION    = 3,20,0
85 !endif
86
87
88 # Here comes the CW tools - TO BE FILLED TO BUILD WITH CW -
89 MODULE_DESC     = "Perl 5.11.0 for NetWare"
90 CCTYPE          = CodeWarrior
91 C_COMPILER              = mwccnlm -c
92 CPP_COMPILER    = mwccnlm
93 LINK                = mwldnlm      
94 LD              = mwldnlm
95 NLM_LIB         = mwldnlm -type library
96 TOOL_HEADERS    = 
97 TOOL_PATH               = 
98 CWCPPFLAGS      = -cpp_exceptions on -wchar_t off -bool on -w on -ansi off
99 CCFLAGS                 = -maxerrors 25 -processor Pentium -align packed \
100                   -w nounusedarg -msext on \
101                   -DN_PLAT_NLM -DNLM=1 -D__NO_MATH_OPS -msgstyle gcc
102 COMPILER_FLAG   = -d NETWARE
103 ERROR_FLAG              = -sym on -sym codeview4 -sym internal
104 LDFLAGS         = -type generic -stacksize 16384 -zerobss \
105                   -nofail -msgstyle gcc -nostderr -w on \
106                   -nlmversion $(NLM_VERSION) \
107                   -copy "Copyright (C) 2000-01\, 2002 Novell\, Inc. All Rights Reserved."
108
109 # Debug flags comes here - Not mandatory - required only for debug build
110 !if "$(MAKE_TYPE)"=="Debug"
111 BLDDIR          = $(DEB_DIR)
112 BLDMESG     = Debug version,
113 !ifdef USE_D2
114 BS_CFLAGS       = -opt off -inline off -sym on -sym codeview4 -sym internal -DDEBUGGING -DDKFBPON
115 BLDMESG         = $(BLDMESG) Using /d2 option
116 !ifdef NLM_NAME8
117 LDFLAGS         = $(LDFLAGS) -sym on -sym codeview4 -sym internal -osym $(MAKE_TYPE)\$(NLM_NAME8).sym
118 !else                                                                                           # !ifdef NLM_NAME8
119 LDFLAGS         = $(LDFLAGS) -sym on -sym codeview4 -sym internal -osym $(MAKE_TYPE)\$(NLM_NAME).sym
120 !endif                                                                                          # !ifdef NLM_NAME8
121 !else                                                                                           # !ifdef USE_D2
122 BS_CFLAGS       = -opt off -inline off -sym on -sym codeview4 -sym internal -DDEBUGGING -DDKFBPON
123 BLDMESG         = $(BLDMESG) Using /d1 option
124 !ifdef NLM_NAME8
125 LDFLAGS         = $(LDFLAGS) -sym on -sym codeview4 -sym internal -osym $(MAKE_TYPE)\$(NLM_NAME8).sym
126 !else                                                                                           # !ifdef NLM_NAME8
127 LDFLAGS         = $(LDFLAGS) -sym on -sym codeview4 -sym internal -osym $(MAKE_TYPE)\$(NLM_NAME).sym
128 !endif                                                                                          # !ifdef NLM_NAME8
129 !endif                                                                                          # !ifdef USE_D2
130 !else                                                                                           # !if "$(MAKE_TYPE)"=="Debug"
131 BLDDIR      = $(REL_DIR)
132 BLDMESG         = Release version
133 ##BS_CFLAGS     = -opt speed -inline smart -inline auto -sym off
134 BS_CFLAGS       = 
135 !endif                                                                                          # !if "$(MAKE_TYPE)"=="Debug"
136
137
138 ADD_LOCDEFS =   -DPERL_CORE
139
140 NLM_INCLUDE                     = -I$(NLMSDKBASE)\include
141 NLM_INCLUDE_NLM         = -I$(NLMSDKBASE)\include\nlm
142 NLM_INCLUDE_NLM_SYS = -I$(NLMSDKBASE)\include\nlm\sys
143 NLM_INCLUDE_OBSLETE = -I$(NLMSDKBASE)\include\nlm\obsolete
144
145 !ifdef SECURITYBASE
146 SECURITY_INCLUDE        = -I$(SECURITYBASE)\include
147 !endif                                                                                  #!ifdef SECURITYBASE
148
149 !ifdef UCSINC
150 NLM_INCLUDE_UCS     = -I$(UCSINC)
151 !endif                                                                                  #!ifndef UCSINC
152
153 !if "$(NW_EXTNS)"=="yes" 
154 INCLUDE_NW          = -I.\include
155 !endif
156
157
158 INC_PREV                        = -I..
159 INC_THIS                        = -I.
160
161
162 NLM_INCLUDE_PATH = $(NLM_INCLUDE) $(NLM_INCLUDE_NLM) $(NLM_INCLUDE_NLM_SYS) $(NLM_INCLUDE_OBSLETE) \
163                    $(NLM_INCLUDE_MP) $(TOOL_HEADERS)
164
165 !ifdef SECURITYBASE
166 NLM_INCLUDE_PATH = $(NLM_INCLUDE_PATH) $(SECURITY_INCLUDE)
167 !endif                                                                                  #!ifdef SECURITYBASE
168
169 !ifdef UCSINC
170 NLM_INCLUDE_PATH = $(NLM_INCLUDE_PATH) $(NLM_INCLUDE_UCS)
171 !endif                                                                                  #!ifndef UCSINC
172
173 INCLUDE = $(INC_THIS) $(INC_PREV) -I- $(NLM_INCLUDE_PATH)
174
175 PATH = $(PATH);$(TOOL_PATH)
176  
177 NLM_INCLUDES    = -I$(COREDIR) $(INCLUDE_NW)
178
179 CCFLAGS     = $(CCFLAGS) $(INCLUDE)
180
181 COMPLER_FLAGS   =  $(BS_CFLAGS) $(ADD_BUILDOPT) $(NW_FLAGS) $(COMPILER_FLAG) $(MPKFLAGS) $(CCFLAGS)
182                   
183
184 # Source file list
185 NW_H_FILES                      =       \
186                                                 .\iperlhost.h   \
187                                                 .\interface.h   \
188                                                 .\netware.h \
189                                                 .\nw5iop.h      \
190                                                 .\nw5sck.h      \
191                                                 .\nwpipe.h      \
192                                                 .\nwplglob.h    \
193                                                 .\nwtinfo.h     \
194                                                 .\nwutil.h      \
195                                                 .\nwhashcls.h \
196
197 NW_HOST_H_FILES         =       \
198                                                 .\iperlhost.h   \
199                                                 .\interface.h   \
200                                                 .\netware.h     \
201                                                 .\nw5sck.h      \
202                                                 .\nwperlhost.h  \
203
204
205 CLIB_H_FILES            =       \
206                                                 .\clibsdio.h    \
207                                                 .\clibstr.h             \
208                                                 .\clibstuf.h    \
209                                                 .\stdio.h       \
210                                                 .\string.h      \
211
212 NW_SRC                          =       \
213                                                 .\CLIBstuf.c    \
214                                                 .\sv_nw.c               \
215                                                 .\nw5.c         \
216                                                 .\nw5sck.c      \
217                                                 .\nw5thread.c \
218                                                 .\nwmain.c      \
219                                                 .\nwpipe.c  \
220                                                 .\nwplglob.c    \
221                                                 .\nwtinfo.c \
222                                                 .\nwutil.c  \
223
224 NW_CPP_SRC          =   \
225                                                 .\nwhashcls.cpp \
226                                                 .\interface.cpp \
227                                                 .\perllib.cpp   \
228
229 EXT_MAIN_SRC            =       \
230                                                 .\Main.c        \
231
232 PERL_IO_SRC                     =       \
233                                                 ..\perlio.c     
234
235 CLIBSTUF_OBJ            =       \
236                                                 .\CLIBstuf.obj
237
238 #PERL_TMP_OBJ       = $(PERL_TEMP_SRC:.c=.obj)
239 NW_SRC_OBJ                      = $(NW_SRC:.c=.obj)
240 NW_CPP_SRC_OBJ      = $(NW_CPP_SRC:.cpp=.obj)
241 NLM_MICROCORE_OBJ       = $(MICROCORE_SRC:.c=.obj) 
242 PERL_LIB_OBJ            = $(PERL_LIB_SRC:.c=.obj)
243 PERL_IO_OBJ                     = $(PERL_IO_SRC:.c=.obj)
244 NLM_CORE_OBJ        = $(NLM_MICROCORE_OBJ)
245 EXT_MAIN_OBJ            = $(EXT_MAIN_SRC:.c=.obj)
246
247 # For dependency checking 
248 # $(BLDDIR) in place of Release or Debug is not working, should look into this - sgp
249 !if "$(BLDDIR)"=="Release" 
250 NLM_OBJ                         = $(NLM_CORE_OBJ:..\=.\Release\)
251 NEWTARE_OBJ_DEP         = $(NW_SRC_OBJ:.\=.\Release\)
252 NEWTARE_CPP_OBJ_DEP     = $(NW_CPP_SRC_OBJ:.\=.\Release\)
253 PERL_LIB_OBJ_DEP        = $(PERL_LIB_OBJ:.\=.\Release\)
254 PERL_IO_OBJ_DEP         = $(PERL_IO_OBJ:..\=.\Release\)
255 !else
256 NLM_OBJ                         = $(NLM_CORE_OBJ:..\=.\Debug\)
257 NEWTARE_OBJ_DEP         = $(NW_SRC_OBJ:.\=.\Debug\)
258 NEWTARE_CPP_OBJ_DEP     = $(NW_CPP_SRC_OBJ:.\=.\Debug\)
259 PERL_LIB_OBJ_DEP        = $(PERL_LIB_OBJ:.\=.\Debug\)
260 PERL_IO_OBJ_DEP         = $(PERL_IO_OBJ:..\=.\Debug\)
261 !endif
262
263 # Symbol base_import & version added for NETWARE
264 NW_CFG_VARS = \
265                 "INST_DRV=$(INST_DRV)"                  \
266                 "INST_TOP=$(INST_TOP)"                  \
267                 "INST_VER=$(INST_VER)"                  \
268                 "INST_ARCH=$(INST_ARCH)"                \
269                 "INST_NW_TOP1=$(INST_NW_TOP1)"  \
270                 "INST_NW_TOP2=$(INST_NW_TOP2)"  \
271                 "INST_NW_VER=$(INST_NW_VER)"    \
272                 "archname=$(ARCHNAME)"                  \
273                 "cc=$(C_COMPILER)"                              \
274                 "ar=$(LINK)"                            \
275                 "ccflags=$(COMPLER_FLAGS)"      \
276                 "cf_email=$(EMAIL)"                     \
277                 "d_crypt=$(D_CRYPT)"                    \
278                 "d_mymalloc=$(PERL_MALLOC)"             \
279 #               "libs=$(LIBFILES)"                      \
280                 "incpath=$(NLM_INCLUDE_PATH)"   \
281                 "libperl=$(PERLIMPLIB:..\=)"            \
282                 "libpth=$(LIBPATH)"     \
283 #               "libc=$(LIBC)"                          \
284                 "make=nmake"                            \
285                 "static_ext=$(STATIC_EXT)"              \
286                 "dynamic_ext=$(DYNAMIC_EXT)"            \
287                 "nonxs_ext=$(NONXS_EXT)"                \
288                 "useithreads=$(USE_ITHREADS)"           \
289                 "usemultiplicity=$(USE_MULTI)"          \
290                 "ld=$(LINK)"                    \
291                 "base_import=$(BASE_IMPORT_FILES)"      \
292                 "LINK_FLAGS=$(LINK_FLAGS:"=\")"         \
293                 "optimize="             \
294                 "d_stdio_cnt_lval=undef"                \
295                 "d_stdio_ptr_lval=undef"                \
296                 "d_stdiobase=undef"                             \
297                 "d_stdstdio=undef"                              \
298                 "d_times=undef"                                 \
299                 "direntrytype=DIR"                              \
300                 "nlm_version=$(NLM_VERSION)"            \
301                 "d_archname=NetWare"    \
302                 "mpktool=$(MPKTOOL) $(XDCFLAGS)"        \
303                 "toolpath=$(TOOL_PATH)"
304
305
306 NW_CFGSH_TMPL   = config.wc
307 NW_CFGH_TMPL    = config_H.wc
308
309 SOCKET_NLM      = $(AUTODIR)\Socket\Socket.NLM
310 FCNTL_NLM       = $(AUTODIR)\Fcntl\Fcntl.NLM
311 IO_NLM          = $(AUTODIR)\IO\IO.NLM
312 OPCODE_NLM      = $(AUTODIR)\Opcode\Opcode.NLM
313 SDBM_FILE_NLM = $(AUTODIR)\SDBM_File\SDBM_File.NLM
314 POSIX_NLM       = $(AUTODIR)\POSIX\POSIX.NLM
315 ATTRS_NLM       = $(AUTODIR)\attrs\attrs.NLM
316 B_NLM           = $(AUTODIR)\B\B.NLM
317 DUMPER_NLM      = $(AUTODIR)\Data\Dumper\Dumper.NLM
318 PEEK_NLM        = $(AUTODIR)\Devel\Peek\Peek.NLM
319 RE_NLM          = $(AUTODIR)\re\re.NLM
320 BYTELOADER_NLM  = $(AUTODIR)\ByteLoader\ByteLoader.NLM
321 DPROF_NLM       = $(AUTODIR)\Devel\DProf\DProf.NLM
322 GLOB_NLM        = $(AUTODIR)\File\Glob\Glob.NLM
323 HOSTNAME_NLM    = $(AUTODIR)\Sys\Hostname\Hostname.NLM
324 CWD_NLM                 = $(EXTDIR)\Cwd\Cwd.NLM
325 STORABLE_NLM            = $(EXTDIR)\Storable\Storable.NLM
326 LISTUTIL_NLM            = $(EXTDIR)\List\Util.NLM
327 MIMEBASE64_NLM          = $(EXTDIR)\MIME\Base64\Base64.NLM
328 XSAPITEST_NLM           = $(EXTDIR)\XS\APItest\APItest.NLM
329 XSTYPEMAP_NLM           = $(EXTDIR)\XS\Typemap\Typemap.NLM
330 UNICODENORMALIZE_NLM    = $(EXTDIR)\Unicode\Normalize\Normalize.NLM
331
332 EXTENSION_NLM   =               \
333                 $(FCNTL_NLM)    \
334                 $(BYTELOADER_NLM)       \
335                 $(IO_NLM)               \
336                 $(SOCKET_NLM)   \
337                 $(OPCODE_NLM)   \
338                 $(B_NLM)                \
339                 $(ATTRS_NLM)    \
340                 $(SDBM_FILE_NLM)        \
341                 $(POSIX_NLM)    \
342                 $(DUMPER_NLM)   \
343                 $(GLOB_NLM)             \
344                 $(PEEK_NLM)             \
345                 $(RE_NLM)       \
346                 $(DPROF_NLM)    \
347                 $(HOSTNAME_NLM)         \
348                 $(CWD_NLM)              \
349                 $(STORABLE_NLM)         \
350                 $(LISTUTIL_NLM)         \
351                 $(MIMEBASE64_NLM)       \
352                 $(XSAPITEST_NLM)        \
353                 $(XSTYPEMAP_NLM)        \
354                 $(UNICODENORMALIZE_NLM)  \
355                 $(FILTER_NLM)   
356
357 # Begin - Following is required to build NetWare specific extensions CGI2Perl, Perl2UCS and UCSExt
358 CGI2PERL                = CGI2Perl\CGI2Perl
359 PERL2UCS                = Perl2UCS\Perl2UCS
360 UCSExt                  = Perl2UCS\UCSExt
361
362 CGI2PERL_NLM = \CGI2Perl\CGI2Perl.NLM
363 PERL2UCS_NLM = $(AUTODIR)\Perl2UCS\Perl2UCS.NLM
364 UCSExt_NLM = $(AUTODIR)\UCSExt\UCSExt.NLM
365
366 NETWARE_EXTNS = \
367                 $(CGI2PERL_NLM) \
368                 $(PERL2UCS_NLM) \
369                 $(UCSExt_NLM)
370 # End
371
372
373 ECHO_SRC                        = TestNLM\echo\echo.c
374 TYPE_SRC                        = TestNLM\type\type.c
375 ECHO_SRC_OBJ                    = $(ECHO_SRC:.c=.obj)
376 TYPE_SRC_OBJ                    = $(TYPE_SRC:.c=.obj)
377 ECHO_NLM        = TestNLM\echo\echo.nlm
378 TYPE_NLM        = TestNLM\type\type.nlm
379
380 TEST_NLMS       =       \
381                         $(ECHO_NLM)     \
382                         $(TYPE_NLM)     \
383
384
385 !ifndef SCREEN
386 SCREEN          = 'none'
387 !endif
388
389 !ifndef NLM_DESCRIPTION
390 NLM_DESCRIPTION = $(NLM_NAME8) for NetWare
391 !endif
392
393 !ifndef NLM_VERSION
394 NLM_VERSION    = 3.1.0
395 !endif
396
397 !ifndef NLM_EXT
398 NLM_EXT         = NLM
399 !endif
400
401 !ifndef BUILT
402 BUILT     = $(BLDDIR)\$(NLM_NAME8).$(NLM_EXT)
403 !endif
404
405 !ifndef BASE_IMPORT_FILES
406 BASE_IMPORT_FILES = Import @$(NLMIMPORTS)\clib.imp, @$(NLMIMPORTS)\nlmlib.imp, @$(NLMIMPORTS)\threads.imp, @$(NLMIMPORTS)\nit.imp, @$(NLMIMPORTS)\socklib.imp, \
407 @$(NLMIMPORTS)\fpsm.imp, @$(NLMIMPORTS)\lib0.imp
408 !endif
409
410 !ifdef SECURITYBASE
411 BASE_IMPORT_FILES = $(BASE_IMPORT_FILES), @$(SECURITY_IMPORTS)\nwsec.imp
412 !endif                                                                                  # !ifdef SECURITYBASE
413
414 !ifdef USE_MPK
415 BASE_IMPORT_FILES = $(BASE_IMPORT_FILES), @$(MPKBASE)\import\mpkorg.imp
416 !endif
417
418 !ifndef BASE_IMPORT_FNS
419 BASE_IMPORT_FNS = Import ImportSymbol, GetSystemConsoleScreen, LoadModule
420 !endif
421
422 !ifdef CODEWAR
423 NWLIBPATH  = 
424 LIBPATH386 = 
425 LIBPATH = 
426 !else                                                                                   # !ifdef CODEWAR
427 !error Please define the tools base directory before proceeding
428 !endif                                                                                  # !ifdef CODEWAR
429
430 !ifndef BASE_LIBRARIES
431 !ifdef WATCOM
432 BASE_LIBRARIES = Library plib3s.lib, math3s.lib, clib3s.lib
433 !endif                                                                                  # !ifdef WATCOM
434 !ifdef CODEWAR
435 BASE_LIBRARIES = 
436 !endif                                                                                  # !ifdef CODEWAR
437 !endif                                                                                  # !ifndef BASE_LIBRARIES
438
439
440 COPYRIGHT = Copyright (C) 2000-01, 2002 Novell, Inc. All Rights Reserved.
441
442 EXPORTS = Export @perl.imp
443
444 #
445 # Set these to wherever you want "nmake install" to put your
446 # newly built perl.
447 #
448 INST_DRV        = C:
449 INST_TOP        = $(INST_DRV)\perl
450
451 INST_NW_DRV = i:
452 INST_NW_VOL = sys:
453 INST_NW_TOP1 = $(INST_NW_VOL)\perl
454 INST_NW_TOP2 = $(INST_NW_DRV)\perl
455 #INST_NW_VER = \5.6.1
456
457 #
458 # Comment this out if you DON'T want your perl installation to be versioned.
459 # This means that the new installation will overwrite any files from the
460 # old installation at the same INST_TOP location.  Leaving it enabled is
461 # the safest route, as perl adds the extra version directory to all the
462 # locations it installs files to.  If you disable it, an alternative
463 # versioned installation can be obtained by setting INST_TOP above to a
464 # path that includes an arbitrary version string.
465 #
466 INST_VER        = \5.11.0
467
468 #
469 # Comment this out if you DON'T want your perl installation to have
470 # architecture specific components.  This means that architecture-
471 # specific files will be installed along with the architecture-neutral
472 # files.  Leaving it enabled is safer and more flexible, in case you
473 # want to build multiple flavors of perl and install them together in
474 # the same location.  Commenting it out gives you a simpler
475 # installation that is easier to understand for beginners.
476 #
477 INST_ARCH       = \$(ARCHNAME)
478
479 #
480 # uncomment to enable multiple interpreters.  This is need for fork()
481 # emulation.
482 #
483
484 USE_MULTI       = define
485
486 #
487 # Beginnings of interpreter cloning/threads; still very incomplete.
488 # This should be enabled to get the fork() emulation.  This needs
489 # USE_MULTI as well.
490 #
491 USE_ITHREADS    = define
492
493 #
494 # uncomment to enable the implicit "host" layer for all system calls
495 # made by perl.  This needs USE_MULTI above.  This is also needed to
496 # get fork().
497 #
498 USE_IMP_SYS     = define
499
500 # uncomment this to enable the experimental PerlIO I/O subsystem
501 # else USE_STDIO will be defined.
502 #USE_PERLIO     = define
503 #USE_STDIO = define
504
505 # For now let this be here
506 #
507 #CRYPT_SRC      = fcrypt.c
508
509 # For now let this be here
510 #
511 #CRYPT_LIB      = fcrypt.lib
512
513 #
514 # set this if you wish to use perl's malloc
515 # WARNING: Turning this on/off WILL break binary compatibility with extensions
516 # you may have compiled with/without it.  Be prepared to recompile all
517 # extensions if you change the default.  Currently, this cannot be enabled
518 # if you ask for USE_IMP_SYS above.
519 #
520 #PERL_MALLOC    = define
521
522 #
523 # set this to your email address (perl will guess a value from
524 # from your loginname and your hostname, which may not be right)
525 #
526 #EMAIL          =
527
528 ##
529 ## Build configuration ends.
530 ##
531
532 ##################### CHANGE THESE ONLY IF YOU MUST #####################
533
534 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
535 D_CRYPT         = undef
536 !ELSE
537 D_CRYPT         = define
538 CRYPT_FLAG      = -DHAVE_DES_FCRYPT
539 !ENDIF
540
541 !IF "$(PERL_MALLOC)" == ""
542 PERL_MALLOC     = undef
543 !ENDIF
544
545 !IF "$(USE_IMP_SYS)" == "define"
546 PERL_MALLOC     = undef
547 !ENDIF
548
549 !IF "$(USE_MULTI)" == ""
550 USE_MULTI       = undef
551 !ENDIF
552
553 !IF "$(USE_ITHREADS)" == ""
554 USE_ITHREADS    = undef
555 !ENDIF
556
557 !IF "$(USE_IMP_SYS)" == ""
558 USE_IMP_SYS     = undef
559 !ENDIF
560
561 !IF "$(USE_PERLCRT)" == ""
562 USE_PERLCRT     = undef
563 !ENDIF
564
565 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
566 USE_MULTI       = define
567 !ENDIF
568
569 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
570 USE_MULTI       = define
571 !ENDIF
572
573 !IF "$(USE_MULTI)" != "undef"
574 BUILDOPT        = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
575 !ENDIF
576
577 !IF "$(USE_IMP_SYS)" != "undef"
578 BUILDOPT        = $(BUILDOPT) -DPERL_IMPLICIT_SYS
579 !ENDIF
580
581 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
582 PROCESSOR_ARCHITECTURE  = x86
583 !ENDIF
584
585 !IF "$(USE_MULTI)" == "define"
586 ARCHNAME        = NetWare-$(PROCESSOR_ARCHITECTURE)-multi
587 !ELSE
588 ARCHNAME        = NetWare-$(PROCESSOR_ARCHITECTURE)
589 !ENDIF
590
591 !IF "$(USE_MULTI)" != "undef"
592 ADD_BUILDOPT    = $(ADD_BUILDOPT) -DPERL_IMPLICIT_CONTEXT
593 !ENDIF
594
595 !IF "$(USE_IMP_SYS)" != "undef"
596 ADD_BUILDOPT    = $(ADD_BUILDOPT) -DPERL_IMPLICIT_SYS
597 !ENDIF
598
599 !IF "$(USE_ITHREADS)" == "define"
600 ARCHNAME        = $(ARCHNAME)-thread
601 !ENDIF
602
603 !IF "$(USE_PERLIO)" == "define"
604 USE_STDIO               = undef
605 ADD_BUILDOPT    = $(ADD_BUILDOPT) -DUSE_PERLIO
606 ARCHNAME                = $(ARCHNAME)-perlio
607 !ELSE
608 #USE_STDIO      = define
609 #ADD_BUILDOPT   = $(ADD_BUILDOPT) -DUSE_STDIO
610 !ENDIF
611
612
613 ARCHDIR         = ..\lib\$(ARCHNAME)
614 COREDIR         = ..\lib\CORE
615 AUTODIR         = ..\lib\auto
616 LIBDIR          = ..\lib
617 EXTDIR          = ..\ext
618 PODDIR          = ..\pod
619 EXTUTILSDIR     = $(LIBDIR)\ExtUtils
620
621 #
622 INST_SCRIPT     = $(INST_TOP)$(INST_VER)\bin
623 INST_BIN        = $(INST_SCRIPT)$(INST_ARCH)
624 INST_LIB        = $(INST_TOP)$(INST_VER)\lib
625 INST_ARCHLIB    = $(INST_LIB)$(INST_ARCH)
626 INST_COREDIR    = $(INST_ARCHLIB)\CORE
627 INST_POD        = $(INST_LIB)\pod
628 INST_HTML       = $(INST_POD)\html
629
630 #
631 # Options
632 #
633
634 OBJOUT_FLAG     = -Fo
635 EXEOUT_FLAG     = -Fe
636
637
638 #################### do not edit below this line #######################
639 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
640
641 o = .obj
642
643 #
644 # Rules
645
646
647 .SUFFIXES : .c $(o) .nlm .lib .NLM
648
649
650 #
651 # various targets
652 PERLIMPLIB      = ..\perl.lib
653
654 MINIPERL        = ..\miniperl.exe
655 CONFIGPM        = ..\lib\Config.pm
656 MINIMOD         = ..\lib\ExtUtils\Miniperl.pm
657 X2P                     = ..\x2p\a2p.nlm
658
659 PL2BAT          = ..\win32\bin\pl2bat.pl
660
661 UTILS           =                       \
662                 ..\utils\h2ph           \
663                 ..\utils\splain         \
664                 ..\utils\dprofpp        \
665                 ..\utils\perlbug        \
666                 ..\utils\pl2pm          \
667                 ..\utils\c2ph           \
668                 ..\utils\h2xs           \
669                 ..\utils\perldoc        \
670                 ..\pod\checkpods        \
671                 ..\pod\pod2html         \
672                 ..\pod\pod2latex        \
673                 ..\pod\pod2man          \
674                 ..\pod\pod2text         \
675                 ..\pod\pod2usage        \
676                 ..\pod\podchecker       \
677                 ..\pod\podselect        \
678                 ..\x2p\find2perl        \
679                 ..\x2p\s2p              
680
681 MAKE            = nmake -nologo
682 #NMAKE       = $(C_COMPILER) $(INCLUDE) $(NLM_INCLUDES) $(COMPLER_FLAGS) $(ADD_LOCDEFS) $(ERROR_FLAG) $(*F).c -o $@
683
684 XCOPY           = xcopy /f /r /i /d
685 RCOPY           = xcopy /f /r /i /e /d
686 NOOP            = @echo
687 NULL            =
688
689 #
690 # filenames given to xsubpp must have forward slashes (since it puts
691 # full pathnames in #line strings)
692 XSUBPP          = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp -C++ -prototypes
693
694 MICROCORE_SRC   =               \
695                 ..\av.c         \
696                 ..\deb.c        \
697                 ..\doio.c       \
698                 ..\doop.c       \
699                 ..\dump.c       \
700                 ..\globals.c    \
701                 ..\gv.c         \
702                 ..\mro.c        \
703                 ..\hv.c         \
704                 ..\locale.c     \
705                 ..\mathoms.c    \
706                 ..\mg.c         \
707                 ..\numeric.c    \
708                 ..\op.c         \
709                 ..\perl.c       \
710                 ..\perlapi.c    \
711                 ..\perly.c      \
712                 ..\pp.c         \
713                 ..\pp_ctl.c     \
714                 ..\pp_hot.c     \
715                 ..\pp_pack.c    \
716                 ..\pp_sort.c    \
717                 ..\pp_sys.c     \
718                 ..\reentr.c     \
719                 ..\regcomp.c    \
720                 ..\regexec.c    \
721                 ..\run.c        \
722                 ..\scope.c      \
723                 ..\sv.c         \
724                 ..\taint.c      \
725                 ..\toke.c       \
726                 ..\universal.c  \
727                 ..\utf8.c       \
728                 ..\util.c       \
729                 ..\xsutils.c
730
731 #EXTRACORE_SRC  = $(EXTRACORE_SRC) perllib.c
732
733 !IF "$(PERL_MALLOC)" == "define"
734 EXTRACORE_SRC   = $(EXTRACORE_SRC) ..\malloc.c
735 !ENDIF
736
737 #EXTRACORE_SRC  = $(EXTRACORE_SRC) ..\perlio.c
738
739 !IF "$(CRYPT_SRC)" != ""
740 NW_SRC  = $(NW_SRC) .\$(CRYPT_SRC)
741 !ENDIF
742
743 DLL_SRC         = $(DYNALOADER).c
744
745 X2P_SRC         =               \
746                 ..\x2p\a2p.c    \
747                 ..\x2p\hash.c   \
748                 ..\x2p\str.c    \
749                 ..\x2p\util.c   \
750                 ..\x2p\walk.c
751
752 CORE_NOCFG_H    =               \
753                 ..\av.h         \
754                 ..\cop.h        \
755                 ..\cv.h         \
756                 ..\dosish.h     \
757                 ..\embed.h      \
758                 ..\form.h       \
759                 ..\gv.h         \
760                 ..\handy.h      \
761                 ..\hv.h         \
762                 ..\iperlsys.h   \
763                 ..\mg.h         \
764                 ..\nostdio.h    \
765                 ..\op.h         \
766                 ..\opcode.h     \
767                 ..\perl.h       \
768                 ..\perlapi.h    \
769                 ..\perlsdio.h   \
770                 ..\perlsfio.h   \
771                 ..\perly.h      \
772                 ..\pp.h         \
773                 ..\proto.h      \
774                 ..\regexp.h     \
775                 ..\scope.h      \
776                 ..\sv.h         \
777                 ..\thread.h     \
778                 ..\unixish.h    \
779                 ..\utf8.h       \
780                 ..\util.h       \
781                 ..\warnings.h   \
782                 ..\XSUB.h       \
783                 ..\EXTERN.h     \
784                 ..\perlvars.h   \
785                 ..\intrpvar.h
786                 
787 CORE_H          = $(CORE_NOCFG_H) .\config.h
788
789 DLL_OBJ         = $(DLL_SRC:.c=.obj)
790 X2P_OBJ         = $(X2P_SRC:.c=.obj)
791
792 DYNAMIC_EXT     = Socket IO Fcntl Opcode SDBM_File POSIX attrs B re \
793                 Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
794                 Storable/Storable List/Util MIME/Base64/Base64 XS/APItest/APItest \
795                 XS/Typemap/Typemap Unicode/Normalize/Normalize Sys/Hostname
796
797 STATIC_EXT      = DynaLoader
798 NONXS_EXT       = Errno
799
800 DYNALOADER      = $(EXTDIR)\DynaLoader\DynaLoader
801 SOCKET          = $(EXTDIR)\Socket\Socket
802 FCNTL           = $(EXTDIR)\Fcntl\Fcntl
803 OPCODE          = $(EXTDIR)\Opcode\Opcode
804 SDBM_FILE       = $(EXTDIR)\SDBM_File\SDBM_File
805 IO                      = $(EXTDIR)\IO\IO
806 POSIX           = $(EXTDIR)\POSIX\POSIX
807 ATTRS           = $(EXTDIR)\attrs\attrs
808 B                       = $(EXTDIR)\B\B
809 RE                      = $(EXTDIR)\re\re
810 DUMPER          = $(EXTDIR)\Data\Dumper\Dumper
811 ERRNO           = $(EXTDIR)\Errno\Errno
812 PEEK            = $(EXTDIR)\Devel\Peek\Peek
813 BYTELOADER      = $(EXTDIR)\ByteLoader\ByteLoader
814 DPROF           = $(EXTDIR)\Devel\DProf\DProf
815 GLOB            = $(EXTDIR)\File\Glob\Glob
816 HOSTNAME        = $(EXTDIR)\Sys\Hostname\Hostname
817 CWD                     = $(EXTDIR)\Cwd\Cwd
818 STORABLE                = $(EXTDIR)\Storable\Storable
819 LISTUTIL                = $(EXTDIR)\List\Util
820 MIMEBASE64              = $(EXTDIR)\MIME\Base64\Base64
821 XSAPITEST               = $(EXTDIR)\XS\APItest\APItest
822 XSTYPEMAP               = $(EXTDIR)\XS\Typemap\Typemap
823 UNICODENORMALIZE        = $(EXTDIR)\Unicode\Normalize\Normalize
824
825 ERRNO_PM_NW     = $(LIBDIR)\Errno.pm
826
827 EXTENSION_C     =               \
828                 $(SOCKET).c     \
829                 $(FCNTL).c      \
830                 $(OPCODE).c     \
831                 $(SDBM_FILE).c  \
832                 $(IO).c         \
833                 $(POSIX).c      \
834                 $(ATTRS).c      \
835                 $(RE).c         \
836                 $(DUMPER).c     \
837                 $(PEEK).c       \
838                 $(B).c          \
839                 $(BYTELOADER).c \
840                 $(DPROF).c      \
841                 $(GLOB).c       \
842                 $(HOSTNAME).c \
843                 $(CWD).c        \
844                 $(STORABLE).c   \
845                 $(LISTUTIL).c   \
846                 $(MIMEBASE64).c \
847                 $(XSAPITEST).c  \
848                 $(XSTYPEMAP).c  \
849                 $(UNICODENORMALIZE).c   \
850
851 EXTENSION_NPM = \
852                 $(ERRNO_PM_NW)  \
853
854 POD2HTML        = $(PODDIR)\pod2html
855 POD2MAN         = $(PODDIR)\pod2man
856 POD2LATEX       = $(PODDIR)\pod2latex
857 POD2TEXT        = $(PODDIR)\pod2text
858
859 #
860 # Top targets
861 #
862
863 all : .cleanoldfiles .\nwconfig.h $(CONFIGPM) $(NLM_NAME) $(EXTENSION_NLM) $(EXTENSION_NPM) $(TEST_NLMS) $(NETWARE_EXTNS)
864
865 #------------------------------------------------------------
866
867 ..\config.sh : config.nw5 $(MINIPERL) config_sh.PL
868         $(MINIPERL) -I..\lib config_sh.PL $(NW_CFG_VARS) config.nw5 > ..\config.sh
869
870 # this target is for when changes to the main config.sh happen
871 # edit config.{b,v,g,w}c and make this target once for each supported
872 # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
873 regen_config_h:
874         perl config_sh.PL $(NW_CFG_VARS) $(NW_CFGSH_TMPL) > ..\config.sh
875         cd ..
876         -del /f /q perl.exe
877         perl configpm
878         cd netware
879         -del /f /q $(NW_CFGH_TMPL)
880         -mkdir $(COREDIR)
881         -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
882         rename config.h $(NW_CFGH_TMPL)
883
884 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
885         cd .. && miniperl configpm
886         if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
887         $(XCOPY) ..\*.h $(COREDIR)\*.*
888         $(XCOPY) *.h $(COREDIR)\*.*
889         $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
890         if exist include\* $(RCOPY) include $(COREDIR)\*.*
891         $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
892             || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
893         @echo CONFIGPM Done
894
895 $(MINIPERL) : 
896         $(error)Please build $(MINIPERL) before continuing
897
898 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
899         cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
900
901 ..\x2p\a2p$(o) : ..\x2p\a2p.c
902         @echo $(MPKMESSAGE)...$(BLDMESG)...$@
903         $(C_COMPILER) $(COMPLER_FLAGS) $(NLM_INCLUDES) -I..\x2p $(ADD_LOCDEFS) $(ERROR_FLAG) $*.c -o $@
904     @echo Built $(@)
905
906 ..\x2p\hash$(o) : ..\x2p\hash.c
907         @echo $(MPKMESSAGE)...$(BLDMESG)...$@
908         $(C_COMPILER) $(COMPLER_FLAGS) $(NLM_INCLUDES) -I..\x2p $(ADD_LOCDEFS) $(ERROR_FLAG) $*.c -o $@
909     @echo Built $(@)
910         
911 ..\x2p\str$(o) : ..\x2p\str.c
912         @echo $(MPKMESSAGE)...$(BLDMESG)...$@
913         $(C_COMPILER) $(COMPLER_FLAGS) $(NLM_INCLUDES) -I..\x2p $(ADD_LOCDEFS) $(ERROR_FLAG) $*.c -o $@
914     @echo Built $(@)
915
916 ..\x2p\util$(o) : ..\x2p\util.c
917         @echo $(MPKMESSAGE)...$(BLDMESG)...$@
918         $(C_COMPILER) $(COMPLER_FLAGS) $(NLM_INCLUDES) -I..\x2p $(ADD_LOCDEFS) $(ERROR_FLAG) $*.c -o $@
919     @echo Built $(@)
920
921 ..\x2p\walk$(o) : ..\x2p\walk.c
922         @echo $(MPKMESSAGE)...$(BLDMESG)...$@
923         $(C_COMPILER) $(COMPLER_FLAGS) $(NLM_INCLUDES) -I..\x2p $(ADD_LOCDEFS) $(ERROR_FLAG) $*.c -o $@
924     @echo Built $(@)
925         
926 $(X2P) : $(MINIPERL) $(X2P_OBJ)
927         @echo Building $@..........
928         $(MINIPERL) ..\x2p\find2perl.PL
929         $(MINIPERL) ..\x2p\s2p.PL
930 # Linker definitions and lining come here for CODEWARRIOR
931     @echo $(BASE_IMPORT_FILES) > $*.def
932     @echo MODULE clib >> $*.def
933     @echo Import @perl.imp >> $*.def
934 !ifdef USE_XDC
935         $(MPKTOOL) $(XDCFLAGS) $*.xdc
936         @echo Import Mp.imp >> $*.def
937         @echo xdcdata $*.xdc >> $*.def
938 !endif
939 ##    $(LINK) $(LDFLAGS) $(BS_CFLAGS) -desc "Awk to Perl Translator" $(X2P_OBJ) $(BLDDIR)\clibstuf.obj -commandfile $*.def -o $@ 
940     $(LINK) $(LDFLAGS) -desc "Awk to Perl Translator" $(X2P_OBJ) $(BLDDIR)\clibstuf.obj -commandfile $*.def -o $@ 
941
942 $(EXTDIR)\DynaLoader\dl_netware.xs: dl_netware.xs
943         copy dl_netware.xs $(EXTDIR)\DynaLoader\dl_netware.xs
944
945 HEADERS :
946         @echo . . . . making stdio.h and string.h
947         @copy << stdio.h >\nul
948
949 /*
950  * Copyright (C) 2000-01 Novell, Inc. All Rights Reserved.
951  *
952  * You may distribute under the terms of either the GNU General Public
953  * License or the Artistic License, as specified in the README file.
954  *
955  */
956
957 /*
958  * FILENAME             :       stdio.h
959  * DESCRIPTION  :       Generated header file, do not edit. See makefile.
960  *                  This header file causes the includer to use clibstuf.h
961  *                  The purpose of clibstuf is to make sure that Perl, cgi2perl and
962  *                  all the perl extension nlm's (*.NLM) use the Novell Netware CLIB versions
963  *                  of standard functions. This code loads up a whole bunch of function pointers
964  *                  to point at the standard CLIB functions.
965  * Author               :       HYAK
966  * Date                 :       January 2001.
967  *
968  */
969
970
971 #ifndef __Stdio_H__
972 #define __Stdio_H__
973
974
975 #include "$(NLMSDKBASE)\INCLUDE\NLM\stdio.h"
976 #include "clibsdio.h"
977
978
979 #endif  // __Stdio_H__
980
981 <<
982         @copy stdio.h $(COREDIR)
983          
984         @copy << string.h >\nul
985
986 /*
987  * Copyright (C) 2000-01 Novell, Inc. All Rights Reserved.
988  *
989  * You may distribute under the terms of either the GNU General Public
990  * License or the Artistic License, as specified in the README file.
991  *
992  */
993
994 /*
995  * FILENAME             :       string.h
996  * DESCRIPTION  :       Generated header file, do not edit. See makefile.
997  *                  This header file causes the includer to use clibstuf.h
998  *                  The purpose of clibstuf is to make sure that Perl, cgi2perl and
999  *                  all the perl extension nlm's (*.NLM) use the Novell Netware CLIB versions
1000  *                  of standard functions. This code loads up a whole bunch of function pointers
1001  *                  to point at the standard CLIB functions.
1002  * Author               :       HYAK
1003  * Date                 :       January 2001.
1004  *
1005  */
1006
1007
1008 #ifndef __String_H__
1009 #define __String_H__
1010
1011
1012 #include "$(NLMSDKBASE)\INCLUDE\NLM\string.h"
1013 #include "clibstr.h"
1014
1015
1016 #endif  // __String_H__
1017
1018 <<
1019         @copy string.h $(COREDIR)
1020
1021
1022 $(NLM_NAME): MESSAGE HEADERS $(BLDDIR)\nul $(NLM_OBJ) $(NEWTARE_OBJ_DEP) $(NEWTARE_CPP_OBJ_DEP) $(PERL_IO_OBJ_DEP) $(DLL_OBJ) \
1023             $(PERLIMPLIB) $(EXT_MAIN_OBJ) $(PERL_TEMP_OBJ) #$(PERL_LIB_OBJ) 
1024         @echo======= Linking $@ at $(MAKEDIR)\$(BLDDIR) =======
1025 # Linker definitions and lining come here for CODEWARRIOR
1026         @echo $(BASE_IMPORT_FILES) > $*.def
1027         @echo MODULE clib >> $*.def
1028         @echo MODULE netdb >> $*.def
1029 !ifdef SECURITYBASE
1030    @echo MODULE nwsec >> $*.def
1031 !endif                                                                                  #!ifdef SECURITYBASE
1032         @echo $(EXPORTS) >> $*.def
1033 !ifdef USE_XDC
1034         @echo======= Creating XDC file
1035         @echo Import Mp.imp >> $*.def
1036 !ifdef NLM_NAME8
1037         $(MPKTOOL) $(XDCFLAGS) $(BLDDIR)\$(NLM_NAME8).xdc
1038         @echo xdcdata $(BLDDIR)\$(NLM_NAME8).xdc >> $*.def
1039 !else
1040         $(MPKTOOL) $(XDCFLAGS) $(BLDDIR)\$(NLM_NAME).xdc
1041         @echo xdcdata $(BLDDIR)\$(NLM_NAME).xdc >> $*.def 
1042 !endif
1043 !endif
1044 ##    $(LINK) $(LDFLAGS) $(BS_CFLAGS) -desc "Perl 5.6.1 for NetWare" $(NEWTARE_OBJ_DEP:.obj=.obj) $(NLM_OBJ:.obj=.obj) $(PERL_IO_OBJ_DEP:.obj=.obj) $(DLL_OBJ:.obj=.obj) $(NEWTARE_CPP_OBJ_DEP:.obj=.obj) -commandfile $*.def -o .\$(BLDDIR)\$@
1045         $(LINK) $(LDFLAGS) -desc $(MODULE_DESC) $(NEWTARE_OBJ_DEP:.obj=.obj) $(NLM_OBJ:.obj=.obj) $(PERL_IO_OBJ_DEP:.obj=.obj) $(DLL_OBJ:.obj=.obj) $(NEWTARE_CPP_OBJ_DEP:.obj=.obj) -commandfile $*.def -o .\$(BLDDIR)\$@
1046         copy splittree.pl .. 
1047         $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1048         @echo ========Linked $@ ==========
1049
1050         @echo======= Finished building $(BUILT).
1051
1052 # Create the debug or release directory if not existing
1053 $(BLDDIR)\nul:
1054         @echo . . . . mkdir $(BLDDIR)
1055         @mkdir $(BLDDIR)
1056         @echo '$(BLDDIR)' directory created.
1057
1058 MESSAGE: 
1059         @echo======= $(MAKE_ACTION)ing $(NLM_NAME) at $(MAKEDIR)\$(BLDDIR) ======= 
1060   
1061 $(PERLIMPLIB): perllib.imp
1062 #    @echo Building $(PERLIMPLIB)...
1063 #    $(LD) -type library $(NLM_OBJ) $(BLDDIR)\nw5.obj $(BLDDIR)\nwmain.obj $(BLDDIR)\nw5thread.obj $(BLDDIR)\nwtinfo.obj \
1064 #    $(BLDDIR)\nwutil.obj $(BLDDIR)\interface.obj $(BLDDIR)\perllib.obj $(PERL_IO_OBJ_DEP) $(DLL_OBJ) -o $@
1065 #       $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1066 #       @echo $(PERLIMPLIB) Done
1067
1068 perllib.imp : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
1069 #       $(MINIPERL) -w ..\makedef.pl PLATFORM=netware FILETYPE=def $(ADD_BUILDOPT) \
1070 #           CCTYPE=$(CCTYPE) > perllib.def
1071         @echo (Perl) > perl.imp
1072         $(MINIPERL) -w ..\makedef.pl PLATFORM=netware FILETYPE=imp $(BS_CFLAGS) $(DEFINES) $(ADD_BUILDOPT) \
1073             CCTYPE=$(CCTYPE) >> perl.imp
1074         copy perl.imp $(COREDIR)
1075   
1076 $(DLL_OBJ) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
1077         @echo $(MPKMESSAGE)...$(BLDMESG)...$@
1078         @$(C_COMPILER) $(NLM_INCLUDES) $(COMPLER_FLAGS) $(NLM_INCLUDES) $(ADD_LOCDEFS) $(ERROR_FLAG) -I$(EXTDIR)\DynaLoader \
1079         $(EXTDIR)\DynaLoader\$(*F).c -o $@
1080         @echo $(@) Done.
1081
1082 $(DYNALOADER).c : $(MINIPERL) $(EXTDIR)\DynaLoader\dl_netware.xs $(CONFIGPM)
1083         if not exist $(AUTODIR) mkdir $(AUTODIR)
1084         cd $(EXTDIR)\$(*B)
1085         ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1086         ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1087         cd ..\..\netware
1088         $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1089         $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1090         cd $(EXTDIR)\$(*B)
1091         $(XSUBPP) dl_netware.xs > $(*B).c
1092         cd ..\..\netware
1093         @echo Dynaloader Done
1094
1095
1096 $(PERL_IO_OBJ_DEP) : ..\$(*F).c
1097         @echo $(MPKMESSAGE) $(BLDMESG) $@
1098         $(C_COMPILER) $(COMPLER_FLAGS) $(NLM_INCLUDES) $(ADD_LOCDEFS) $(ERROR_FLAG) ..\$(*F).c -o $@
1099         @echo Built $(@)
1100
1101 $(NLM_OBJ)      : ..\$(*F).c
1102         @echo $(MPKMESSAGE) $(BLDMESG) $@
1103         $(C_COMPILER) $(COMPLER_FLAGS) $(NLM_INCLUDES) $(ADD_LOCDEFS) $(ERROR_FLAG) ..\$(*F).c -o $@
1104         @echo Built $(@)
1105         
1106     
1107 $(NEWTARE_OBJ_DEP) : $(NW_H_FILES) $(NW_HOST_H_FILES) $(*F).c
1108         @echo $(MPKMESSAGE) $(BLDMESG) $@
1109         $(C_COMPILER) $(COMPLER_FLAGS) $(NLM_INCLUDES) $(ADD_LOCDEFS) $(ERROR_FLAG) $(*F).c -o $@
1110     @echo Built $(@)
1111
1112 $(NEWTARE_CPP_OBJ_DEP) : $(NW_H_FILES) $(NW_HOST_H_FILES) $(*F).cpp
1113         @echo $(MPKMESSAGE) $(BLDMESG) $@
1114         $(C_COMPILER) $(CWCPPFLAGS) $(COMPLER_FLAGS) $(NLM_INCLUDES) $(ADD_LOCDEFS) $(ERROR_FLAG) $(*F).cpp -o $@
1115     @echo Built $(@)
1116
1117 $(EXT_MAIN_OBJ) : $(CLIB_H_FILES)
1118     @echo $(MPKMESSAGE) $(BLDMESG) $@
1119     $(C_COMPILER)  $(NLM_INCLUDES) $(COMPLER_FLAGS) $(ADD_LOCDEFS) $(ERROR_FLAG) $(*F).c -o $@  
1120     $(LD) -type library $@ -o $*.lib
1121     @copy $*.lib $(COREDIR)
1122
1123 # Delete any files that might have got created during building miniperl.exe
1124 # config.sh will definitely be created
1125 # COREDIR might have got created
1126 .cleanoldfiles :
1127         -del /f /q $(PERLIMPLIB)
1128         -del /f /q ..\lib\config.pm
1129         -del /f /q ..\config.sh
1130         -del /f /q .\Main.obj
1131         -del /f /q .\Main.lib
1132         -rmdir /s /q $(AUTODIR)
1133         -rmdir /s /q $(COREDIR)
1134         -del /f /q ..\lib\core
1135
1136 .\nwconfig.h : $(NW_CFGH_TMPL)
1137         @if exist .\config.h del /f /q .\config.h
1138         copy $(NW_CFGH_TMPL) config.h
1139
1140 # REQUIRED WHEN WE INCLUDE CONFIGPM OR REGEN_CONFIG - sgp
1141 #..\nwconfig.sh : config.nw5 $(MINIPERL) config_sh.PL
1142 #       $(MINIPERL) -I..\lib config_sh.PL $(NW_CFG_VARS) config.nw5 > ..\config.sh
1143 #       @pause
1144 #       cd ..
1145 #       del /f /q config.sh
1146 #       rename nwconfig.sh config.sh
1147 #       cd netware
1148
1149 config.nw5 : $(NW_CFGSH_TMPL)
1150         copy $(NW_CFGSH_TMPL) config.nw5
1151
1152 $(SOCKET_NLM): $(NLM_NAME) $(SOCKET).xs
1153         cd $(EXTDIR)\$(*B)
1154         ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1155         $(MAKE)
1156         cd ..\..\netware
1157
1158 $(HOSTNAME_NLM): $(NLM_NAME) $(HOSTNAME).xs
1159         cd $(EXTDIR)\Sys\$(*B)
1160         ..\..\..\miniperl -I..\..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1161         $(MAKE)
1162         cd ..\..\..\netware
1163
1164 $(FCNTL_NLM):
1165         cd $(EXTDIR)\$(*B)
1166         ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1167         $(MAKE)
1168         cd ..\..\netware
1169
1170 $(IO_NLM):
1171         cd $(EXTDIR)\$(*B)
1172         ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1173         $(MAKE)
1174         cd ..\..\netware
1175
1176 $(OPCODE_NLM):
1177         cd $(EXTDIR)\$(*B)
1178         ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1179         $(MAKE)
1180         cd ..\..\netware
1181
1182 $(B_NLM):
1183         cd $(EXTDIR)\$(*B)
1184         ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1185         $(MAKE)
1186         cd ..\..\netware
1187
1188 $(DUMPER_NLM):
1189         cd $(EXTDIR)\Data\$(*B)
1190         ..\..\..\miniperl -I..\..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1191         $(MAKE)
1192         cd ..\..\..\netware
1193
1194 $(PEEK_NLM):
1195         cd $(EXTDIR)\Devel\$(*B)
1196         ..\..\..\miniperl -I..\..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1197         $(MAKE)
1198         cd ..\..\..\netware
1199
1200 $(RE_NLM):
1201         cd $(EXTDIR)\$(*B)
1202         ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1203         $(MAKE)
1204         cd ..\..\netware
1205
1206 $(BYTELOADER_NLM):
1207         cd $(EXTDIR)\$(*B)
1208         ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1209         $(MAKE)
1210         cd ..\..\netware
1211
1212 $(DPROF_NLM):
1213         cd $(EXTDIR)\Devel\$(*B)
1214         ..\..\..\miniperl -I..\..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1215         $(MAKE)
1216         cd ..\..\..\netware
1217
1218 $(GLOB_NLM):
1219         cd $(EXTDIR)\File\$(*B)
1220         ..\..\..\miniperl -I..\..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1221         $(MAKE)
1222         cd ..\..\..\netware
1223
1224 $(POSIX_NLM):
1225         cd $(EXTDIR)\$(*B)
1226         ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1227         $(MAKE)
1228         cd ..\..\netware
1229
1230 $(ATTRS_NLM):
1231         cd $(EXTDIR)\$(*B)
1232         ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1233         $(MAKE)
1234         cd ..\..\netware
1235
1236 $(SDBM_FILE_NLM):
1237         cd $(EXTDIR)\$(*B)
1238         ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1239         $(MAKE)
1240         cd ..\..\netware
1241
1242 $(CWD_NLM):
1243         cd $(EXTDIR)\$(*B)
1244         ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1245         $(MAKE)
1246         cd ..\..\netware
1247
1248 $(STORABLE_NLM):
1249         cd $(EXTDIR)\$(*B)
1250         ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1251         $(MAKE)
1252         cd ..\..\netware
1253
1254 $(LISTUTIL_NLM):
1255         cd $(EXTDIR)\List\$(*B)
1256         ..\..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1257         $(MAKE)
1258         cd ..\..\..\netware
1259
1260 $(MIMEBASE64_NLM):
1261         cd $(EXTDIR)\Mime\$(*B)
1262         ..\..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1263         $(MAKE)
1264         cd ..\..\..\netware
1265
1266 $(XSAPITEST_NLM):
1267         cd $(EXTDIR)\XS\$(*B)
1268         ..\..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1269         $(MAKE)
1270         cd ..\..\..\netware
1271
1272 $(XSTYPEMAP_NLM):
1273         cd $(EXTDIR)\XS\$(*B)
1274         ..\..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1275         $(MAKE)
1276         cd ..\..\..\netware
1277
1278 $(UNICODENORMALIZE_NLM):
1279         cd $(EXTDIR)\Unicode\$(*B)
1280         ..\..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1281         $(MAKE)
1282         cd ..\..\..\netware
1283
1284
1285 $(ERRNO_PM_NW):
1286 #       @echo Building $@
1287         cd $(EXTDIR)\$(*B)
1288         ..\..\miniperl -I..\..\lib Makefile.PL PERL_CORE=1 INSTALLDIRS=perl
1289         $(MAKE)
1290         cd ..\..\netware
1291
1292 $(ECHO_SRC_OBJ): $*.c
1293         @echo $(MPKMESSAGE) $(BLDMESG) $@
1294         $(C_COMPILER) $(NLM_INCLUDES) $(COMPLER_FLAGS) $(ADD_LOCDEFS) $(ERROR_FLAG) $*.c -o $@
1295         @echo Built $(@)
1296
1297 $(ECHO_NLM): $(ECHO_SRC_OBJ)
1298         @echo======= Linking $@ =======
1299 # Linker definitions and lining come here for CODEWARRIOR
1300     @echo $(BASE_IMPORT_FILES) > $*.def
1301     @echo MODULE clib >> $*.def
1302     @echo Import @perl.imp >> $*.def
1303 !ifdef USE_XDC
1304         $(MPKTOOL) $(XDCFLAGS) $*.xdc
1305         @echo Import @MP.imp >> $*.def
1306         @echo xdcdata $*.xdc >> $*.def 
1307 !endif
1308 ##    $(LINK) $(LDFLAGS) $(BS_CFLAGS) -desc "DOS Echo emulation for Perl testing" $(ECHO_SRC_OBJ) $(BLDDIR)\clibstuf.obj -commandfile $*.def -o $@
1309     $(LINK) $(LDFLAGS) -desc "DOS Echo emulation for Perl testing" $(ECHO_SRC_OBJ) $(BLDDIR)\clibstuf.obj -commandfile $*.def -o $@
1310         @echo======= Linking Complete =======
1311
1312 $(TYPE_SRC_OBJ): $*.c
1313         @echo $(MPKMESSAGE) $(BLDMESG) $@
1314         $(C_COMPILER) $(NLM_INCLUDES) $(COMPLER_FLAGS) $(ADD_LOCDEFS) $(ERROR_FLAG) $*.c -o $@
1315         @echo Built $(@)
1316         
1317 $(TYPE_NLM): $(TYPE_SRC_OBJ)
1318         @echo======= Linking $@ =======
1319 # Linker definitions and lining come here for CODEWARRIOR
1320     @echo $(BASE_IMPORT_FILES) > $*.def
1321     @echo MODULE clib >> $*.def
1322     @echo Import @perl.imp >> $*.def
1323 !ifdef USE_XDC
1324         $(MPKTOOL) $(XDCFLAGS) $*.xdc
1325         @echo Import @MP.imp >> $*.def 
1326         @echo xdcdata $*.xdc >> $*.def 
1327 !endif
1328 ##    $(LINK) $(LDFLAGS) $(BS_CFLAGS) -desc "DOS Type emulation for Perl testing" $(TYPE_SRC_OBJ) $(BLDDIR)\clibstuf.obj -commandfile $*.def -o $@
1329     $(LINK) $(LDFLAGS) -desc "DOS Type emulation for Perl testing" $(TYPE_SRC_OBJ) $(BLDDIR)\clibstuf.obj -commandfile $*.def -o $@
1330         @echo======= Linking Complete =======
1331
1332
1333 # Build NetWare specific extensions
1334 $(CGI2PERL_NLM):
1335 !if "$(NW_EXTNS)"=="yes"
1336         cd $(*B)
1337         ..\..\miniperl -I..\..\lib Makefile.PL "CCCDLFLAGS=-bool on -lang c++" PERL_CORE=1 INSTALLDIRS=perl
1338         $(MAKE)
1339         cd ..\..\netware
1340 !endif
1341
1342 $(PERL2UCS_NLM):
1343 !if "$(NW_EXTNS)"=="yes"
1344         cd $(*B)
1345         ..\..\miniperl -I..\..\lib Makefile.PL "CCCDLFLAGS=-bool on -lang c++" PERL_CORE=1 INSTALLDIRS=perl
1346         $(MAKE)
1347         cd ..\..\netware
1348 !endif
1349
1350 $(UCSExt_NLM):
1351 !if "$(NW_EXTNS)"=="yes"
1352         cd $(*B)
1353         ..\..\miniperl -I..\..\lib Makefile.PL "CCCDLFLAGS=-bool on -lang c++" PERL_CORE=1 INSTALLDIRS=perl
1354         $(MAKE)
1355         cd ..\..\netware
1356 !endif
1357
1358 nwclean:
1359         -rmdir /s /q $(REL_DIR)
1360         -rmdir /s /q $(DEB_DIR)
1361         @if exist .\stdio.h del /f /q .\stdio.h
1362         @if exist .\string.h del /f /q .\string.h
1363         @if exist .\config.h del /f /q .\config.h
1364         @if exist .\config.nw5 del /f /q .\config.nw5
1365         @if exist .\perl.imp del /f /q .\perl.imp
1366         -del /f /q *.obj *.lib *.def *.sym *.map *.xdc *.err *.nlm
1367         cd testnlm\echo
1368         -del /f /q *.obj *.map *.link *.options *.nlm *.sym *.xdc *.err *.lib *.def *.pdb *.bs
1369         cd ..\type
1370         -del /f /q *.obj *.map *.link *.options *.nlm *.sym *.xdc *.err *.lib *.def *.pdb *.bs
1371         cd ..\..\
1372
1373 utils: $(BLDDIR)\$(NLM_NAME8).$(NLM_EXT) $(X2P)
1374         cd ..\utils
1375         $(MAKE) PERL=$(MINIPERL)
1376         cd ..\pod
1377         copy ..\README.amiga .\perlamiga.pod
1378         copy ..\README.cygwin .\perlcygwin.pod
1379         copy ..\README.dos .\perldos.pod
1380         copy ..\README.hpux .\perlhpux.pod
1381 #       copy ..\README.machten .\perlmachten.pod
1382         copy ..\README.os2 .\perlos2.pod
1383         copy ..\vms\perlvms.pod .\perlvms.pod
1384         copy ..\README.win32 .\perlwin32.pod
1385         copy ..\README.netware .\perlnw5.pod
1386         $(MAKE) -f ..\win32\pod.mak converters
1387
1388         cd ..\lib
1389         $(MINIPERL) lib_pm.PL
1390         cd ..\netware
1391         $(MINIPERL) $(PL2BAT) $(UTILS)
1392
1393 distclean: clean nwclean
1394         -del /f /q $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
1395         -del /f /q $(EXTENSION_NPM)
1396         -del /f /q $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1397         -del /f /q $(EXTDIR)\DynaLoader\dl_netware.xs
1398         -del /f /q $(EXTDIR)\DynaLoader\dl_win32.xs
1399         -del /f /q $(EXTDIR)\DynaLoader\DynaLoader.pm
1400         -del /f /q $(EXTDIR)\DynaLoader\XSLoader.pm
1401         -del /f /q $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1402         -del /f /q $(LIBDIR)\XSLoader.pm
1403         -del /f /q $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1404         -del /f /q $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1405         -del /f /q $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1406         -del /f /q $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1407         -del /f /q $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
1408         -del /f /q $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1409         -del /f /q $(LIBDIR)\File\Glob.pm
1410         -del /f /q $(LIBDIR)\Unicode\Normalize.pm
1411         -rmdir /s /q $(LIBDIR)\IO
1412         -rmdir /s /q $(LIBDIR)\B
1413         -rmdir /s /q $(LIBDIR)\Data
1414         -del /f /q $(PODDIR)\*.html
1415         -del /f /q $(PODDIR)\*.bat
1416         cd ..\utils
1417         -del /f /q h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp
1418         -del /f /q *.bat
1419         cd ..\netware
1420         cd ..\x2p
1421         -del /f /q find2perl s2p
1422         -del /f /q *.bat *.exe
1423         -del /f /q *.obj *.map *.link *.xdc *.err
1424         cd ..\netware
1425         -del /f /q ..\config.sh ..\splittree.pl dlutils.c config.h.new
1426         -del /f /q $(CONFIGPM)
1427         -del /f /q bin\*.bat
1428         cd $(EXTDIR)
1429     -del /s /q /f *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib *.xdc *.err *.obj *.sym
1430         cd ..\netware
1431 !if "$(NW_EXTNS)"=="yes"
1432         cd cgi2perl
1433         -del /f /q *.obj *.bs Makefile *$(o) *.c pm_to_blib *.xdc *.err *.sym *.map *.def *.lib *.pdb
1434         cd ..
1435         cd Perl2UCS
1436         -del /f /q *.obj *.bs Makefile *$(o) *.c pm_to_blib *.xdc *.err *.sym *.map *.def *.lib *.pdb
1437         cd ..\..\netware
1438         cd UCSExt
1439         -del /f /q *.obj *.bs Makefile *$(o) *.c pm_to_blib *.xdc *.err *.sym *.map *.c
1440         cd ..\..\netware
1441 !endif
1442         -rmdir /s /q $(AUTODIR)
1443         -rmdir /s /q $(COREDIR)
1444         -del /f /q ..\config.sh
1445
1446 installwin:
1447         $(MINIPERL) -I..\lib ..\installperl
1448
1449 install : utils installwin perlimp
1450
1451 perlimp :
1452         copy perl.imp $(INST_COREDIR)
1453
1454 installnw:
1455         $(MINIPERL) -I..\lib ..\installperl -netware
1456
1457 install_tests :
1458         cd ..\t
1459         xcopy /f /r /i /s /d *.* $(INST_NW_TOP2)\scripts\t
1460         cd ..\lib
1461         xcopy /f /r /i /s /d *.t $(INST_NW_TOP2)\scripts\t\lib
1462         cd ..\ext
1463         xcopy /f /r /i /s /d *.t $(INST_NW_TOP2)\scripts\t\ext
1464         cd ..\netware\t
1465         xcopy /f /r /i /s /d *.pl $(INST_NW_TOP2)\scripts\t
1466         cd ..
1467
1468 nwinstall: utils installnw install_tests
1469
1470 inst_lib : $(CONFIGPM)
1471         copy ..\win32\splittree.pl .. 
1472         $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1473         $(RCOPY) ..\lib $(INST_LIB)\*.*
1474
1475 clean : 
1476         -@erase miniperlmain$(o)
1477         -@erase /f config.h
1478         -@erase $(DLL_OBJ)
1479         -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1480         -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
1481         -@erase ..\x2p\*.nlm ..\x2p\*.bat