?MAKE:known_extensions extensions dynamic_ext static_ext nonxs_ext \
useposix useopcode : \
Myread hint usedl d_sem d_socket i_db i_dbm i_rpcsvcdbm i_gdbm \
- i_ndbm usethreads use5005threads package test cat rsrc \
+ d_ndbm usethreads use5005threads package test cat rsrc \
d_msg d_shm osname use64bitint i_langinfo d_nl_langinfo \
- libs d_cplusplus
+ libs d_cplusplus sed ls rm contains trnl sort
?MAKE: -pick add $@ %<
?Y:BOTTOM
?S:known_extensions:
-?S: This variable holds a list of all XS extensions included in
-?S: the package.
+?S: This variable holds a list of all extensions (both XS and non-xs)
+?S: included in the package source distribution. This information is
+?S: only really of use during the Perl build, as the list makes no
+?S: distinction between extensions which were build and installed, and
+?S: those which where not. See "extensions" for the list of extensions
+?S: actually built and available.
?S:.
?S:dynamic_ext:
?S: This variable holds a list of XS extension files we want to
?S: link statically into the package. It is used by Makefile.
?S:.
?S:nonxs_ext:
-?S: This variable holds a list of all non-xs extensions included
-?S: in the package. All of them will be built.
+?S: This variable holds a list of all non-xs extensions built and
+?S: installed by the package. By default, all non-xs extensions
+?S: distributed will be built, with the exception of platform-specific
+?S: extensions (currently only one VMS specific extension).
?S:.
?S:extensions:
?S: This variable holds a list of all extension files (both XS and
-?S: non-xs linked into the package. It is propagated to Config.pm
-?S: and is typically used to test whether a particular extesion
+?S: non-xs) installed with the package. It is propagated to Config.pm
+?S: and is typically used to test whether a particular extension
?S: is available.
?S:.
?S:useposix:
?S: for users to skip the Opcode extension from the Configure
?S: command line.
?S:.
-?T:xxx avail_ext tdir nonxs_extensions find_extensions
+?T:xxx avail_ext this_ext tdir xs_extensions nonxs_extensions find_extensions
?INIT:: set useposix=false in your hint file to disable the POSIX extension.
?INIT:useposix=true
?INIT:: set useopcode=false in your hint file to disable the Opcode extension.
?LINT:extern noextensions
?LINT:extern onlyextensions
?T:keepextensions i
+: Check extensions
echo " "
echo "Looking for extensions..." >&4
-: If we are using the old config.sh, known_extensions may contain
-: old or inaccurate or duplicate values.
-known_extensions=''
+: If we are using the old config.sh, nonxs_extensions and xs_extensions may
+: contain old or inaccurate or duplicate values.
nonxs_extensions=''
+xs_extensions=''
: We do not use find because it might not be available.
: We do not just use MANIFEST because the user may have dropped
: some additional extensions into the source tree and expect them
: Function to recursively find available extensions, ignoring DynaLoader
: NOTE: recursion limit of 10 to prevent runaway in case of symlink madness
+: In 5.10.1 and later, extensions are stored in directories
+: like File-Glob instead of the older File/Glob/.
find_extensions='
for xxx in *; do
case "$xxx" in
DynaLoader|dynaload) ;;
*)
- if $test -f $xxx/$xxx.xs -o -f $xxx/$xxx.c; then
- known_extensions="$known_extensions $1$xxx";
- elif $test -f $xxx/Makefile.PL; then
- nonxs_extensions="$nonxs_extensions $1$xxx";
- else
- if $test -d $xxx -a $# -lt 10; then
- set $1$xxx/ $*;
- cd "$xxx";
- eval $find_extensions;
- cd ..;
- shift;
- fi;
- fi
+ this_ext=`echo "$xxx" | $sed -e s/-/\\\//g`;
+ case "$this_ext" in
+ Scalar/List/Utils) this_ext="List/Util" ;;
+ PathTools) this_ext="Cwd" ;;
+ esac;
+ echo " $xs_extensions $nonxs_extensions" > "$tdir/$$.tmp";
+ if $contains " $this_ext " "$tdir/$$.tmp"; then
+ echo >&4;
+ echo "Duplicate directories detected for extension $xxx" >&4;
+ echo "Configure cannot correctly recover from this - shall I abort?" >&4;
+ case "$knowitall" in
+ "") dflt=y;;
+ *) dflt=n;;
+ esac;
+ . ../UU/myread;
+ case "$ans" in
+ n*|N*) ;;
+ *) echo >&4;
+ echo "Ok. Stopping Configure." >&4;
+ echo "Please remove the duplicate directory (e.g. using git clean) and then re-run Configure" >&4;
+ exit 1;;
+ esac;
+ echo "Ok. You will need to correct config.sh before running make." >&4;
+ fi;
+ $ls -1 "$xxx" > "$tdir/$$.tmp";
+ if $contains "\.xs$" "$tdir/$$.tmp" > /dev/null 2>&1; then
+ xs_extensions="$xs_extensions $this_ext";
+ elif $contains "\.c$" "$tdir/$$.tmp" > /dev/null 2>&1; then
+ xs_extensions="$xs_extensions $this_ext";
+ elif $test -d "$xxx"; then
+ nonxs_extensions="$nonxs_extensions $this_ext";
+ fi;
+ $rm -f "$tdir/$$.tmp";
;;
esac;
done'
tdir=`pwd`
+cd "$rsrc/cpan"
+set X
+shift
+eval $find_extensions
+cd "$rsrc/dist"
+set X
+shift
+eval $find_extensions
cd "$rsrc/ext"
set X
shift
eval $find_extensions
-# Special case: Add in threads/shared since it is not picked up by the
-# recursive find above (and adding in general recursive finding breaks
-# SDBM_File/sdbm). A.D. 10/25/2001.
-known_extensions="$known_extensions threads/shared"
-set X $known_extensions
+set X $xs_extensions
shift
-known_extensions="$*"
+xs_extensions=`echo "$*" | tr ' ' $trnl | $sort | tr $trnl ' '`
set X $nonxs_extensions
shift
-nonxs_extensions="$*"
+nonxs_extensions=`echo "$*" | tr ' ' $trnl | $sort | tr $trnl ' '`
cd "$tdir"
+known_extensions=`echo $nonxs_extensions $xs_extensions | tr ' ' $trnl | $sort | tr $trnl ' '`
: Now see which are supported on this system.
?X: avail_ext lists available XS extensions.
avail_ext=''
-for xxx in $known_extensions ; do
+for xxx in $xs_extensions ; do
case "$xxx" in
?X: Handle possible DOS 8.3 filename and case alterations
+ Amiga*)
+ case "$osname" in
+ amigaos) avail_ext="$avail_ext $xxx" ;;
+ esac
+ ;;
DB_File|db_file)
case "$i_db" in
$define) avail_ext="$avail_ext $xxx" ;;
esac
;;
NDBM_File|ndbm_fil)
- case "$i_ndbm" in
+ case "$d_ndbm" in
$define)
case "$osname-$use64bitint" in
hpux-define)
;;
Socket|socket)
case "$d_socket" in
- true|$define|y)
- case "$osname" in
- beos) ;; # not unless BONE
- *) avail_ext="$avail_ext $xxx" ;;
- esac
- ;;
+ true|$define|y) avail_ext="$avail_ext $xxx" ;;
esac
;;
Sys/Syslog|sys/syslog)
# --jhi
avail_ext="$avail_ext $xxx"
;;
+ VMS*)
+ ;;
Win32*)
case "$osname" in
cygwin) avail_ext="$avail_ext $xxx" ;;
case "$onlyextensions" in
'') ;;
*) keepextensions=''
- echo "You have requested that only certains extensions be included..." >&4
+ echo "You have requested that only certain extensions be included..." >&4
for i in $onlyextensions; do
case " $avail_ext " in
*" $i "*)
nonxs_ext=''
for xxx in $nonxs_extensions ; do
case "$xxx" in
+ VMS*)
+ ;;
*) nonxs_ext="$nonxs_ext $xxx"
;;
esac
# the appropriate Makefile.PL.
case " $static_ext " in
*" Encode "*) # Add the subextensions of Encode
- cd "$rsrc/ext"
+ cd "$rsrc/cpan"
for xxx in `ls Encode/*/Makefile.PL|awk -F/ '{print $2}'`; do
static_ext="$static_ext Encode/$xxx"
+ known_extensions="$known_extensions Encode/$xxx"
done
cd "$tdir"
;;
https://perl5.git.perl.org / metaconfig.git / blobdiff